[01:26] <holstein> OvenWerks: i have both.. upright and electric fretless.. as well as a fretted electric
[01:29] <holstein> i use flatwound strings on most everything.. but, it really just depends on what you are going for
[03:09] <OvenWerks> holstein: I had heard that round wound damages fretless fingerboards
[03:09] <holstein> nah
[03:09] <holstein> i mean, maybe.. but, strings in general do
[03:10] <OvenWerks> AH, just noisy then
[03:10] <holstein> metal on wood eventually grooves it up
[03:10] <holstein> no way around it really, though, you could try the tape wound ones
[03:10] <holstein> i have black tape-wound ones that are kind of nice
[03:10] <holstein> but, you might want something brighter
[03:10] <OvenWerks> How do they sound?
[03:10] <holstein> OvenWerks: i like them
[03:10] <holstein> dark
[03:11] <holstein> not a lot of sustain, though..
[03:11] <OvenWerks> I'll have to experiment.
[03:11] <holstein> yeah.. really just depends
[03:11] <holstein> but, i wouldnt be scared to try flats
[03:12] <holstein> i think round wounds are probably more versatile
[03:12] <holstein> i feel i could roll the town down and fake flats a bit on round wounds.. but, not the other way around
[03:12] <OvenWerks> I can imagine. I pulled my fretless apart to try to get a better connection of ground to the bridge, when I put it back together my open E is very quiet.
[03:12] <holstein> roll the tone down*
[03:12] <holstein> hmm.. could be a simple damaged string
[03:13] <holstein> could be something in the nut
[03:13] <OvenWerks> I have been using half rounds, feel like flat wounds but brighter.
[03:13] <holstein> if its literallly just the open E
[03:13] <OvenWerks> I think my bridge is now a little ower and the string is "buzzing"
[03:13] <OvenWerks> *lower
[03:14] <holstein> you can stick something under there and test
[03:14] <OvenWerks> The rest of the string is fine.
[03:14] <holstein> if its at the bridge, you'll usually have it on more notes
[03:14] <holstein> if its just open, its usually at the nut
[03:14] <OvenWerks> That makes sense
[03:16] <OvenWerks>  I don't use the low F much, I will be taking it apart again anyway... I want to sheild the pu hole and the control hole
[03:16] <holstein> its a good idea to get all that clean as possible
[03:16] <OvenWerks> I will wait till I put it together again to play with the nut.
[03:17] <OvenWerks> But I will if I have to. I do use the open E in lots of things
[03:19] <OvenWerks> It is funny, that playing with a leader that plays guitar we don't play much in F... if it was a keyboard player, it would be different.
[03:19] <holstein> yeah. you want it to be even as possible
[03:20] <holstein> yeah.. i work with folks that just play where ever
[03:20] <OvenWerks> Different style.
[03:21] <OvenWerks> When I took the frets out, the nut was too high, I lowered it very slowely, trying for about a frets thickness down. Made a huge difference
[03:22] <holstein> i bet.. couple 16th's of an inch maybe
[03:22] <OvenWerks> I may have had it low enough that it was ok till I changed strings
[03:24] <OvenWerks> But right now I am playing in a place that has floresent lamps and it buzzes. I want to try shielding all the wiring and see if that makes it better at least
[03:25] <holstein> cant hurt
[03:25] <OvenWerks> rolling the tone off hides the buzz, but also hides the top half of my G string
[08:12] <Guest13809> help in to spanish or english
[08:12] <Guest13809> ??
[08:13] <tengounretraso> oli
[08:13] <Guest13809> OwO
[08:13] <tengounretraso> :O+
[08:13] <Guest13809> hola :D
[08:14] <Pepito_> Hello
[08:14] <ERROR_404_> 666
[08:14] <Guest13809> aparesco en una pantalla gigante *-*
[08:14] <tengounretraso> hello
[08:14] <ERROR_404_> ERROR 503 Service Unavailable
[08:15] <Guest13809> me ayudan?
[08:15] <qwerqwer1234p> no
[08:15] <Guest13809> TwT
[08:15] <Guest13809> -----------(-|-) ----------/---/ ---------/---/ --------/---/ -----(__¡__)
[08:15] <qwerqwer1234p> suerte en la vida
[08:16] <ERROR_404_> no acces to nigerianos
[08:16] <qwerqwer1234p> kl
[08:16] <qwerqwer1234p> nigeriia good
[08:17] <ERROR_404_> Armando Esteban Quito
[08:17] <Manuelubuntu> frikis hijos de put
[08:18] <Guest68279> #quit
[08:19] <Guest68279> .-.-.-.-.-.-.-.-.-
[08:19] <Yeel96> necesito ayuda urgente
[08:19] <Yeel96> TT-TTç
[08:20] <guest420> hello
[08:20] <Yeel96> bye
[08:20] <guest420> quien quiere ajuda?
[08:20] <Yeel96> nadie
[08:20] <guest420> mejor para mi
[08:21] <Yeel96> esta desertico
[08:21] <Yeel96> hola?
[08:23] <guest420> que pasa ubuntu
[08:23] <guest420> nesesito ajuda para ssh
[08:24] <Guest41710> no ayuda para novatos
[08:25] <guest420> klk hermanos
[08:25] <guest420> algun bitch por aqui
[08:31] <zequence> !es
[08:42] <clado> I want to force one of my 3 installed soundcards as device 0. How can I do it in ubuntustudio 14.04.1
[08:42] <clado> ?
[09:18] <zequence> clado: Don't. I assume this is for starting jack with the right device?
[09:18] <zequence> Use the name, instead of the number, after hw:
[09:19] <zequence> For example..
[09:19] <zequence> cat /proc/asound/cards
[09:19] <zequence>  0 [PCH            ]: HDA-Intel - HDA Intel PCH
[09:19] <zequence>                       HDA Intel PCH at 0xf1600000 irq 43
[09:19] <zequence> Instead of hw:0, do hw:PCH (in my case)
[09:24] <clado> I will try that zequence thank you for helping
[09:25] <clado> I want to load patches for an sblive soundcard with ld10k1 command but I get an error that I do not have such card
[09:26] <clado> wich is not true
[09:27] <zequence> clado: Don't forget "hw:"
[09:27] <zequence> What do mean by patch?
[09:28] <clado> That soundcard allows you to load a soundfont for the sythesizer included in the card
[09:30] <clado> I have to reboot the computer to see if the solution worked. Thank you
[09:36] <alan_> Corsica13
[12:54] <clado> how should I edit my /etc/modprobe.d/alsa-base.conf so my emu10k1 stays as sound device 0? Here are the contents of my alsa-base.conf http://codebin.org/view/44920d6b
[16:24] <Qormix> hi