[00:00] <daftykins> monkers: without a default gateway, there's no route to go via to reach the VPN host ;)
[00:00] <monkers> Julie7 - so, it can be done, to answer your original question. you may want to test it out on a livecd first.
[00:00] <will_> I was wondering how I can get that options panel back
[00:00] <monkers> daftykins - thats why you add in a single route for it
[00:00] <daftykins> hmm sounds a bit overly complicated to me
[00:00] <monkers> daftykins - its basically the same thing windows is doing for her
[00:01] <monkers> im a routing guy so .. thats my solution :P
[00:01] <monkers> there's probably 4 other ways
[00:01] <Julie7> monkers: daftykins: EriC^^: I need to save everything that you've typed/linked to. So much information!
[00:02] <leonel> hola
[00:02] <daftykins> DNS would require less manual input each time
[00:02] <monkers> daftykins - i've backed up all i can think to backup... any thing else you can think of that might help me recover my raid partition once the new drive is in?
[00:02] <Siente> Hello guys, I've installed Ubuntu, but it's always disconnecting me from inet why so any ideas?
[00:02] <daftykins> monkers: as someone else said, they're configured via data on them, but i have no experience with LVM or whatever setup you have there
[00:02] <monkers> Julie7 - good luck :D
[00:03] <Julie7> monkers: Oh, I'll need it.
[00:03] <Julie7> XD
[00:03] <daftykins> Julie7: how big is your Windows disk and how much free space do you have?
[00:03] <monkers> daftykins - ok, going to install ubuntu now, thanks a million for the help
[00:04] <daftykins> monkers: np \o
[00:04] <Julie7> daftykins: I have a lot of free disk space. I know I should test it out.
[00:04] <daftykins> Julie7: is it win7? or 8
[00:04] <Julie7> daftykins: Windows 8.1 (throws up again).
[00:04] <daftykins> ah, you'd be in for a fun time of learning about UEFI then
[00:04] <Julie7> Oh, no.
[00:05] <daftykins> it's relatively painless really
[00:06] <groidhunter> should i download the latest bios from the nsa.gov site?
[00:06] <OerHeks> groidhunter, how is this ubuntu support related?
[00:07] <phunyguy> groidhunter: this channel is for Ubuntu support only.  Do you have an ubuntu support question?
[00:07] <Julie7> monkers: daftykins: EriC^^: Thanks for all the help. I need to go now.
[00:07] <Julie7> Bye, guys,.
[00:07] <Julie7> -,
[00:07] <daftykins> cya
[00:08] <groidhunter> whatever niggers, i have the right to say nigger because american soldiers in the middle east are fighting for my right
[00:08] <bekks> !op | groidhunter
[00:08] <bekks> thank you
[00:08] <groidhunter> ?
[00:08] <groidhunter> i didn't see what you guys said
[00:08] <phunyguy> !guidelines
[00:08] <phunyguy> read those please
[00:08] <EriC^^> no ban?
[00:09] <groidhunter> EriC^^: free speech
[00:09] <phunyguy> groidhunter: does not apply here
[00:09] <groidhunter> yes it does
[00:09] <groidhunter> this server is hosted in us soil
[00:19] <ibsin> Hello all. Could someone help me out with this? https://www.dropbox.com/s/5daucy7u0hh3w1i/TotemVideoError.png?dl=0
[00:19] <ibsin> I wanna play a DVD, and I keep getting that.
[00:20] <OerHeks> ibsin, did you install restricted extras and perform the css script to decrypt dvd?
[00:20] <OerHeks> !dvd
[00:20] <ibsin> I did install the extras, though, how do I get/run that script?
[00:21] <OerHeks> see the url ubottu gave
[00:21] <mynaras> anyone here familiar with ffmpeg?
[00:23] <mikeru> hey people anyone who can help debug X -> backlight issues
[00:23] <mikeru> I'm on kubuntu 14.10 plasma5, my backlight worked 5 days ago and I don't remember toying around with it
[00:24] <mikeru> I can still control it via /sys/class/backlight
[00:24] <daftykins> 14.10? that's not final yet, talk in #ubuntu+1
[00:24] <mikeru> kk
[00:24] <ibsin> Yay! : D It worked ^w^
[00:24] <thomedy> hey does anyone have  a recommendation for budgeting software on software center
[00:24] <thomedy> i am building a budget for my busines
[00:24] <mynaras> Anyone here familiar with filtering in ffmpeg?
[00:24] <thomedy> and im trying to be good about follow through i thinik it will help
[00:25] <OerHeks> ibsin have fun
[00:26] <daftykins> thomedy: gnucash ?
[00:26] <thomedy> im reading about it right now thank you
[00:27] <OerHeks> http://ubuntuguide.org/wiki/Ubuntu:Trusty#Financial_Software
[00:29] <monkers> ubuntu encryption on the drive - any reason not to?
[00:30] <daftykins> the # of people that come in here with it broken? i'd say no unless you're experienced with it
[00:30] <monkers> cool ty
[00:40] <bdonnahue1> hello my ubuntu keeps showing 404s when i try to update
[00:40] <bdonnahue1> can anyone help
[00:41] <PeterFA> Is it possible to install Ubuntu 14.04 directly from the ISO in Linux?
[00:41] <JasonCX6843> yes
[00:42] <JasonCX6843> PeterFA,  using unetbootin
[00:42] <PeterFA> JasonCX6843: oh, thanks.
[00:42] <d3im0s> sup ladies and gents
[00:42] <ColdIce> Hello, try to compile a source-code (econverter). I've made sure I've installed the required packages, but still the ./configure says that I'm missing them http://pastebin.com/VjYHKQvA
[00:42] <Snake2k> bdonnahue1: Could you copy the output to pastebin or something and paste it here?
[00:42] <JasonCX6843> welcome :)
[00:43] <PeterFA> JasonCX6843: that dds it to a USB device. I'm hoping to install directly from the ISO while running Linux.
[00:44] <JasonCX6843> u can install it without usb or cd
[00:44] <JasonCX6843> from ur pc just use unetbootin
[00:44] <PeterFA> JasonCX6843: oh, I thought just made a bootable USB device.
[00:45] <JasonCX6843> You can do that too :)
[00:47] <squinty> https://help.ubuntu.com/community/Grub2/ISOBoot
[00:47] <kermit> is there an app to record webcam and mic?  i've spent hours fubling with gstreamer commandlines with no luck.. it shouldnt be this hard.
[00:48] <mynaras> kermit, I've been trying to use ffmpeg for streaming with a webcam
[00:48] <JasonCX6843> kermit,  i think camstudio
[00:48] <mynaras> it works for a bit and then the video freezes, but the audio remains
[00:49] <mynaras> I'm currently trying to fix that
[00:49] <JasonCX6843> i forgot a name of an apps that u can record like 10min only but hd
[00:52] <mynaras> anyone here able to help with some ffmpeg and v4l2 issues?
[00:52] <mynaras> I've almost gotten it working
[00:52] <mynaras> but the webcam overlay freezes after about 30 seconds
[00:53] <CrazyM4n> How can you disable alt-rightclick?
[00:53] <ColdIce> Regarding my question, seems like: PKG_CHECK_MODULES is broken :(
[00:53] <moonjump> hi
[00:54] <mynaras> anyone?
[00:54] <ColdIce> http://pastebin.com/QaRBEmm1 output of compile failing & that I've got pkg-config
[00:54] <ColdIce>  installed
[00:55] <trism> ColdIce: libcairo2-dev
[00:55] <ColdIce> got it
[00:55] <ColdIce> already
[00:55] <trism> ColdIce: although no, you're right, perhaps the configure file is messed up
[00:58] <electricprism> Can anyone tell me what the dependency problem is from this Software Center Message? http://pastebin.com/YiXYHMRR
[00:59] <ColdIce> well, the package recommends that I use mercurial to get the source-code, but I get error: abort: requirement 'dotencode' not supported! - does that mean I have to install older version, in that case, which?
[00:59] <mynaras> Here is the script I have in my .bashrc http://pastebin.com/H9UdW7t9
[00:59] <mynaras> it works great but the inset video freezes shortly after I start the stream
[01:01] <mynaras> is anyone able to help?
[01:03] <evan__> what is a good GPU overclock utility for dedicated Intel cards?
[01:04] <daftykins> evan__: not even worth trying
[01:04] <daftykins> evan__: pretty sure intel GPUs are locked to the system bus too, so i doubt it's an option
[01:05] <evan__> can i force the boost to be enable at will
[01:05] <evan__> *enabled
[01:05] <daftykins> desktop?
[01:05] <evan__> mobile
[01:05] <daftykins> that's a terrible, terrible idea
[01:05] <daftykins> no ideas if you can
[01:05] <evan__> damn. well thanks anyways
[01:08] <evan__> could I try to use and MSR intel utility to alter the gpu clock?
[01:09] <Gethen> hols
[01:09] <Gethen> hola even
[01:09] <mynaras> hi Gethen
[01:09] <Gethen> hi
[01:09] <daftykins> evan__: highly doubt it
[01:09] <evan__> damn again
[01:10] <daftykins> evan__: trying to make a game run faster?
[01:10] <mynaras> I don't suppose you could help with my ffmpeg and v4l2 issue with my webcam, can you?
[01:10] <evan__> nothing in particular. just trying to see the extent i can improve the gpu
[01:10] <evan__> since its integrated
[01:10] <evan__> and a ULV
[01:11] <daftykins> evan__: yeah, best way... build a desktop PC.
[01:11] <evan__> i have one
[01:11] <daftykins> laptops, you have what you have.
[01:11] <daftykins> ah even better then
[01:11] <evan__> this is my Chromebook
[01:11] <daftykins> ugh
[01:11] <evan__> running Ubuntu via crouton
[01:11] <daftykins> oh dear
[01:11] <evan__> pretty fun liitle thing
[01:11] <evan__> with an i3
[01:12] <daftykins> evan__: native install would be better, no idea if that's possible with your model though, also xubuntu not unity
[01:13] <evan__> daftykins: are you saying to run xubunu instead of the unity desktop?
[01:13] <daftykins> evan__: that'd make it less painful to use, probably not what you're after though
[01:14] <evan__> i havent had any issues with it so far
[01:14] <evan__> other then something i did
[01:15] <mynaras> Anyone able to figure out why my webcam craps out after 30-ish seconds? http://pastebin.com/H9UdW7t9
[01:17] <syntroPi> Does anyone know what the process which shows with "jbd-2/sda1-8" in iotop has to do? i just found out it WROTE to my SSD for quite some time constantlx with 10 MB/s. i definetively DONT want this functionality (whatever it may be) to wear out my hardware :-/ . May I uninstall / delete / disable whatever black magic that does?
[01:19] <mynaras> is anyone able to help out?
[01:20] <syntroPi> btw im on 14.04 x64 latest on ext4 "discard,noatime,nodiratime,errors=remount-ro"
[01:21] <bubbasaures> !trim | syntroPi
[01:21] <monkers> how do i recover a raid1 array made in ubuntu12 on a new install of ubuntu14? I cant find it >_<
[01:22] <monkers> do i need dmraid? mdadm?
[01:23] <daftykins> !raid
[01:24] <bubbasaures> syntroPi, what that info is, http://ubuntuforums.org/showthread.php?t=2081250
[01:24] <mynaras> anyone have experience streaming using ffmpeg?
[01:24] <Guest56761> not me
[01:24] <infinmed> Too glassed and null for #UBUNTU tonight. May you all rest in peace.
[01:25] <bubbasaures> syntroPi, Additionally spinning HD and SSD have the same life span now basically.
[01:26] <imnewandtrying> so........hi
[01:26] <mynaras> hello
[01:26] <imnewandtrying> im new
[01:27] <mynaras> I am to, kinda
[01:27] <mynaras> Only really been using Linux for 2 months
[01:27] <syntroPi> bubbasaures, thanks for your info, i thought i would have trim enabled when i mount "/" in fstab with "discard,noatime,nodiratime,errors=remount-ro"   <--- DISCARD option
[01:27] <daftykins> feel free to ask a question
[01:27] <imnewandtrying> so im new to this chat.  is it just all ubuntu users that sign up
[01:28] <syntroPi> bubbasaures, the disk in question is "Corsair CSSD-F120GB2 (2.4)"
[01:28] <daftykins> it's people that volunteer, but this channel is not chat, it's support
[01:28] <daftykins> imnewandtrying: this channel is for asking support questions, #ubuntu-offtopic is for general chat
[01:28] <imnewandtrying> ah......thats good to know
[01:29] <monkers> anyone around that knows mdadm? i have a question
[01:29] <imnewandtrying> how do i change channels
[01:29] <mynaras> daftykins: Do you have any experience with ffmpeg?
[01:30] <daftykins> mynaras: nope else i'd have replied to you with advice :)
[01:30] <Bashing-om> imnewandtrying: "/join #ubuntu-offtopic" for instance.
[01:30] <mynaras> I figured, it's just frustrating
[01:30] <wassup_> node really fast, java just bytecode not nearly as fast ... worried
[01:30] <mynaras> I've been working on this all day and it's so close to functional
[01:31] <daftykins> mynaras: i did ponder suggesting it could be USB saturation though, did you dial the quality down to check if it survives for longer?
[01:31] <syntroPi> bubbasaures, how would i disable this journaling block device ? i really dont want it to randomly write to my ssd, i even would not care whatever functionality i would sacrifice for that
[01:31] <mynaras> hmm, I've already gotten it set to only run at 352x288
[01:32] <mynaras> I don't know how I'd turn down the quality
[01:32] <daftykins> mynaras: oh i thought i read talk of 1920x1080, shows how functional my eyes are right now
[01:32] <mynaras> heh, the whole stream is 1920x1080, but it works just fine
[01:32] <bubbasaures> syntroPi, No idea, I think you have a confirmation biased goal, do the research.
[01:34] <Desmond> hello ?
[01:34] <Desmond> i need some help to install the ubuntu 12.04
[01:34] <Desmond> i can't get passed the paritioning on the harddrive
[01:35] <Desmond> Can someone shed me some lights?
[01:35] <mynaras> I can try, what causes the issue?
[01:35] <Tyrandis> who wins ubuntu or mint hmmmm
[01:35] <Bashing-om> Desmond: UEFI ? OR maybe in MBR the 4 partition limit ?
[01:36] <Desmond> my harddrive is a used harddrive
[01:36] <bubbasaures> !topic | Tyrandis
[01:36] <Desmond> i was using it on windows server 2008 r2
[01:36]  * Darth_Coder hugs ubottu 
[01:36] <Darth_Coder> Tyrandis: Ubuntu > Life
[01:37] <Desmond> i have tried to delete the parition ... keep failing to delete the parition in the ubunut installer
[01:37] <Darth_Coder> Desmond: dual boot with Windows or whatever?
[01:37] <Bashing-om> Desmond: From liveDVD -> sudo apt -get install pastebinit , sudo fdisk -lu | pstebinit . Pass the URL back to us, we see what the partitioning is like.
[01:37] <mynaras> I'm going to reboot this machine. I may get back on
[01:37] <Desmond> nah ... i wanna do a single boot without windows server 008
[01:38] <Desmond> but i don't mind to dual boot if i have to ... i prefer to single boot with ubuntu 12.04
[01:38] <Bashing-om> Desmond: Nother thought - server = Raid, desktop install will not cope with raid's meta data .
[01:38] <Desmond> how can i get it into the command line with the livd dvd ?
[01:38] <bubbasaures> Desmond, Choose the whole disc option than
[01:38] <monkers> my raid array is back \o/
[01:38] <Desmond> i tried the whole disk option too
[01:38] <daftykins> monkers: \o/
[01:38] <Desmond> none of the options worked
[01:39] <Rudj> hi, i switched mobo today and can't get sound any sound. alsa mixer installed but not working, tried to manually install drivers against new 3.16 kernel but that als o failed i'm quite out od ifes
[01:39] <monkers> i had to install mdadm and then rebooit
[01:39] <bubbasaures> Desmond, Let the live build the OS
[01:39] <monkers> *reboot
[01:39] <wassup_> https://www.osdisc.com/   has a ubuntu disk for 5.95
[01:39] <bubbasaures> Desmond, Are any partitions mounted?
[01:39] <Desmond> how can i get live cd ? can you send me a link?
[01:39] <Bashing-om> Desmond: Boot the liveDVD in "try ubuntu mode" . At the desktop key combo crl+alt+t will yield a terminal.
[01:40] <Desmond> at the desktop ? you mean in windows server 2008 r2 ?
[01:40] <Desmond> the system will boot into the ubuntu installer as soon as it bootsup
[01:40] <Lazik> I have the generic kernel and a new 3.17, I want to create a new 3.17 from the same source but with a different .conf. How can I control how it is named? ie vmlinux-3.17-rc71-lightweight
[01:40] <Bashing-om> Desmond: http://www.ubuntu.com/download/desktop .
[01:41] <Lazik> instead of having a bunch of .old .old?
[01:41] <bubbasaures> Desmond, What ubuntu version did you download, and what is the end goal a server or a desktop/
[01:41] <Desmond> ok ... so i need the desktop version of the live cd to install the ubuntu server 12.04?
[01:41] <bubbasaures> no
[01:41] <Desmond> i downloaded 12.04, 13.04 and 14.04
[01:42] <Desmond> my goal is ubuntu server
[01:42] <Desmond> not desktop
[01:42] <Bashing-om> Desmond: " the system will boot into the ubuntu installer as soon as it bootsup" sounds like a server install ??
[01:42] <Desmond> yes
[01:42] <Desmond> i wanna rebuild this server into a unbutnu server
[01:42] <bubbasaures> Desmond, The server install is a text install, 12.04 and 14.04 are the only supported releases right now.
[01:42] <Desmond> ok
[01:43] <Desmond> i can either go with 12.04 or 14.04
[01:43] <Desmond> i prefer 12.04
[01:43] <bubbasaures> Desmond, Both have 5 years support.
[01:43] <bubbasaures> about 3 years left on 12.04
[01:43] <Desmond> but i am going to turn this server into IDS system
[01:43] <Bashing-om> Desmond: Only the desktop has "leve" -> try ubuntu. Wee need to boot to "try ubuntu" to look at the hard disk(s) .. then maybe advise what it will take to install server .
[01:44] <Desmond> i am not sure those IDS software will be compatible with 14.04
[01:44] <Bashing-om> leve/live*
[01:44] <Desmond> got it
[01:44] <Loshki> 12.04 is at 12.04.4, whereas 14.04 is only at 14.04.1. For stability, you want 12...
[01:44] <Desmond> i will download the desktop version first and go with 12.04 then
[01:44] <Desmond> thanks
[01:45] <bubbasaures> that is an opinion Loshki nothing supports that.
[01:45] <Loshki> bubbasaures: it *is* an opinion. My experience supports it.
[01:46] <Tyrandis> i dont mind 14.04
[01:46] <bubbasaures> Loshki, That is total BS here come on. ;)
[01:46] <bubbasaures> or in any academic sense
[01:48] <Loshki> bubbasaures: you've never heard of 'never use the dot-oh release of anything if you can avoid it'? At dot-one is marginally better. A dot-4 tends to be pretty damn stable. Unless they add new features instead of bugfixing, how can it be otherwise.
[01:49] <bubbasaures> Loshki, We hear all kinds of stuff, personally I want empirical info, stats, data, and so does the channel unless you preface with IMO.
[01:49] <daftykins> Loshki: *12.04.5
[01:50] <daftykins> bubbasaures: Loshki's statement is a pretty common one in IT circles.
[01:51] <Rudj> hi, i switched mobo today and can't get sound any sound. alsa mixer installed but not working, tried to manually install drivers against new 3.16 kernel but that als o failed i'm quite out of idead, this is output of aplay -l aplay: device_list:268: no soundcards found...
[01:51] <bubbasaures> sigh
[01:52] <ColdIce> trism, I upgraded to 12.04 - hoping that may solve the problem. Nope, still errors.
[01:54] <erikk> I've been here a few times looking for an answer to this, but I've had some trouble. I'm a relatively new linux user, have a recent Ubuntu install with gnome 3, and have a messed up sound slider on my panel. It only lets me hear stuff at 50% or beyond for headphones (works fine for speakers) and at this 50% mark it gets really loud really fast
[01:54] <erikk> How do I fix it?
[01:55] <erikk> It is probably closer to 40% though
[01:57] <bubbasaures> erikk, You might run alsamixer in the terminal and take a look, and in the sound gui.
[01:58] <erikk> bubbasaures: I'm not too knowledgeable on how to change system settings with that, but I've done that. It hasn't really told me too much
[01:58] <bubbasaures> also look in the sound gui that is
[01:58] <bubbasaures> erikk, Ah, not sure here otherwise.
[01:59] <erikk> bubbasaures: What is the "sound gui"? I've gone to the gnome sound options window that comes up when I click on the button with tools on it after clicking on the sound button in the gnome panel
[02:00] <bubbasaures> erikk, sound is the app name, gui is guided user interface, a gui is not a text interface.
[02:00] <bubbasaures> gui is a term sound is an app
[02:00] <erikk> bubbasaures: Okay
[02:00] <erikk> bubbasaures: So no offense, but you're not really sure where else I should look then?
[02:01] <Rudj> erkk, what you are looking for is how to increse sound steps in technical terms
[02:01] <erikk> I've done some googling but haven't been able to figure it out myself
[02:01] <erikk> Rudj: I thought I saw some stuff about that online, but is that different from changing sensitivity?
[02:01] <bubbasaures> erikk, Heh, no offense here, not really never had an issue so have not looked close at that part ofthe OS.
[02:02] <Rudj> where do you increase the sound from? kb or directly from speakers?
[02:02] <erikk> Rudj: Because I'm not looking to make the slider more sensitive but rather just start working on an absolute scale from 0 to 100 rather than -50 to 100
[02:02] <erikk> Rudj: What is kb?
[02:02] <Rudj> keyboard
[02:02] <erikk> Rudj: I normally use the indicator on the gnome panel
[02:04] <erikk> Actually, I'm not even sure if the speakers are right either
[02:04] <erikk> I think I notice the glitch on my headphones because it is more deafening when I can't get the sound right
[02:05] <erikk> Either no sound or way too loud and then I have to make a minute adjustment that takes up time and has to be finely tuned for everything I listen to
[02:05] <Rudj> erikk, i think you can adjust the slider so that when you move it instead of decreasing or increasing by say +5 it goes by +3 or +1
[02:06] <Rudj> erikk, both headphones and speakers have the same problem?
[02:06] <erikk> Rudj: It is hard to tell.
[02:06] <erikk> Rudj: But I can hear my speakers below the level where my headphones go mute
[02:07] <trism> ColdIce: that is weird, this: http://mercurial.selenic.com/wiki/RequiresFile says it should be included with 1.7, 12.04 has 2.0...I just tested and I can pull it on 14.04
[02:08] <ColdIce> trism, I hate compiling from source code *MAD* PKG_CHECK_MODULES(GLIB, glib-2.0 >
[02:08] <ColdIce> that single line: PGK_CHECK_MODULES is not working on my system, I even had PKG-CONFIG installed...
[02:09] <ColdIce> To make it work, I have to run these commands: aclocal -I /usr/share/aclocal; autoheader; automake; autoconf
[02:09] <ColdIce> why?
[02:11] <trism> ColdIce: you probably had to regen the configure file
[02:11] <ColdIce> regen, I don't follow exactly
[02:12] <ColdIce> I'm just trying to install a smple tool which is only available as source so I just google and follow instructions
[02:13] <ColdIce> I forgot to install a dependency for the tool, now when I try to compile that dependency I get this: jpeg.c:604:13: error: variable 'bits' set but not used [-Werror=unused-but-set-variable]
[02:13] <trism> ColdIce: those commands rebuild the autotools build files (configure plus all the Makefiles), the mercurial repo has an autogen.sh file that runs them all
[02:13] <ColdIce> what does it even mean, trism ?
[02:13] <ColdIce> Thanks!
[02:13] <ColdIce> so, the autogen.sh is not working properly you say so I have to run those manually? :)
[02:19] <trism> ColdIce: did you run the autogen.sh file before running configure?
[02:20] <ColdIce> yes :)
[02:21] <trism> ColdIce: did it complete successfully?
[02:21] <ColdIce> I don't even want to continue this...
[02:33] <wheatthin> bleh, I'm back anybody miss me? :P  jk good evening peeps
[02:34] <ColdIce> good evening wheatthin, I'm mad cuz compiling is ****
[02:38] <wheatthin> ColdIce, compiling is ok, when everything goes well :)
[02:38] <ColdIce> sure, it's okay.. but when you don't understand that much everything is wrong and you try to fix it, new problems occurs
[02:39] <ColdIce> I literally gave up.
[02:39] <wheatthin> ColdIce, may I ask what you're trying to compile?
[02:39] <ColdIce> http://esminis.com/econverter/
[02:39] <Wulframn> Hey guys, is there a hardware channel? If you don't know, then what is the command to search channels? /alis or something?
[02:40] <ColdIce> first this problem occured: http://pastebin.com/VjYHKQvA - due to: PKG_CHECK_MODULES, then I fixed that by: aclocal -I /usr/share/aclocal; autoheader; automake; autoconf
[02:40] <ColdIce> then another problem occured, poppler wasn't installed
[02:40] <bynarie> hello
[02:40] <ColdIce> Package 'poppler-glib' requires 'poppler = 0.18.4' but version of poppler is 0.26.5
[02:41] <Wulframn> howdy, bynarie
[02:41] <bynarie> im trying to install ubuntu on my win8 machine... i can get usb stick to bootup and i click install and after that the kb/mouse dies on mew
[02:41] <bynarie> any idea?
[02:41] <bynarie> *me
[02:41] <wheatthin> hmm so it's too new
[02:41] <ColdIce> yea, trying on a VM 14.04 now
[02:41] <bynarie> the kb/mouse works fine for the first couple of screens/prompts then just dies
[02:41] <ColdIce> I got 12.04 on the problem machine
[02:42] <wheatthin> no, that won't help I'm afraid, you're gonna have to go further backwards
[02:42] <bynarie> my pc is msi gt70-2oc-059us
[02:42] <bynarie> its pretty well equipped machine with i7 cpu, 16gb ram.. bla bla
[02:43] <ColdIce> bynarie, I see, a laptop with Win8... turned off secure boot since you can boot.
[02:43] <wheatthin> bynarie, are you using a usb hub by any chance?
[02:43] <ColdIce> and fastboot
[02:43] <ColdIce> tried with external keyboard / mouse?
[02:43] <bynarie> no hub
[02:43] <bynarie> wheatthin, yes secure boot is off... legacy boot enabled
[02:43] <bynarie> ColdIce, no i have not.. i will try that
[02:44] <wheatthin> bynarie, what's your dmesg say?
[02:44] <bynarie> but i have another win8 machine, uefi bios, that installs ubuntu just fine. im gonna hop on it right now real quick... BRB
[02:44] <bynarie> wheatthin, i dont know what you mean by dmesg
[02:48] <bynarie> wheatthin, i will brb... and thank you for helping me... i appreciate it
[02:49] <ColdIce> bynarie, just run dmesg
[02:50] <ColdIce> from terminal and pastebin it :)
[02:50] <bynarie> ok me back
[02:50] <bynarie> now im on my ubuntu machine
[02:51] <bynarie> ok..... if my kb/mouse locks up, how do i access terminal and type dmesg?
[02:51] <ColdIce> wheatthin, swfdec is required for eConverted, its still failing on my NEW 14.04 *MAD* jpeg.c:604:13: error: variable 'bits' set but not used [-Werror=unused-but-set-variable]
[02:51] <ColdIce>    JpegBits *bits;
[02:51] <bynarie> and keep in mind... ubuntu isnt even installed
[02:51] <ColdIce> bynarie, do you have an external keyboard?
[02:51] <bynarie> yea im hookin it up right now... ill let you know.. hold on
[02:54] <Bashing-om> bynarie: As a thought "legacy boot enabled" generally is a ps/2 keyboard setting .. as you have new machine and USB, don't think ya want this setting .Keybord not working when kernel is loaded - bios is not handing off to the system what the kernel can hanle (??).
[02:54] <Bashing-om> handle*
[02:54] <Delizin> Howdy all. I'm pretty new to linux and I'm trying to setup a cron job to run a django management command every day at 3am, but I'm not entirely clear on the process. My understanding is I need to create a text file such as: https://dpaste.de/N53o then run chrontab on the text file and it is good to go?
[02:54] <bynarie> Bashing-om, ok... well i also have some achi xchi hand off settings enabled.. does that matter?
[02:55] <bynarie> i actually have uefi with csm as my boot mode.. which i believe just means uefi with legacy support
[02:55] <Bashing-om> bynarie: ya want AHCI .. now a days .. with this new hard ware.
[02:55] <bynarie> ok... well thats already enabled
[02:56] <bynarie> but i do see your point
[02:56] <Bashing-om> !uefi | byn
[02:57] <bynarie> Bashing-om, note this... The ubuntu machine im on right now also has uefi and i didnt have to change any settings to get it to install
[02:57] <bynarie> its only on this msi laptop
[02:57] <bynarie> thank you for link i will check it out
[02:58] <Bashing-om> bynarie: Win8 dual booting ? ubuntu must be installed same same as Win UEFI / legacy mode ???
[02:58] <bynarie> yes... the machine im on right now is ubuntu/win8
[02:59] <bynarie> no settings required changes
[02:59] <bynarie> eufi bios
[03:00] <Bashing-om> bynarie: Consider, different machine, different hardware, different OEMs implement UEFI differently . To this time there is no set standard.
[03:01] <bynarie> ok.. i gotcha
[03:02] <bynarie> ColdIce, the ext kb/mouse did NOT work.. woudlnt even boot to install this time
[03:02] <ColdIce> can you boot into recovery mode to see if ext / normal works there? https://wiki.ubuntu.com/RecoveryMode
[03:03] <ColdIce> just want to be sure :P
[03:05] <bynarie> omg ive been wasting my time
[03:05] <bynarie> i just put my bios settings back to normal and it works now
[03:05] <bynarie> figured
[03:05] <bynarie> figures**
[03:05] <Bashing-om> bynarie: : )
[03:05] <bynarie> lol..
[03:06] <bynarie> thank you guys for your help i appreciate it
[03:06] <bynarie> well.. maybe i spoke too soon. crap!
[03:06] <Bashing-om> bynarie: Come back when you can stay longer, and help others too .
[03:07] <bynarie> yea.. im staying on
[03:07] <Bashing-om> bynarie: What "loaded" up that changed how the keyboard driver interfaces ?
[03:08] <bynarie> the installation went further
[03:08] <bynarie> but locked up again
[03:09] <ravster> hey everyone.  Where can I find a .deb for the latest util-linux.  Ubuntu is going up only to version 2.20 right now.
[03:10] <Bashing-om> bynarie: What option from the initial install screen have you chosen ? "something else" or "install along side" ??
[03:11] <bynarie> there was no optionn like that
[03:12] <Bashing-om> I do not think that is a good thing .. but wait for others who have experince installing with Win8 .
[03:19] <wormmd> Hey all. Just installed Trusty on an HP Pavilion zv6000, ran firmware-b43-installer, rfkill shows no hard or soft block on phy0, but my wifi hard switch light is off and wpa_supplicant reports that my wifi is hard-blocked. What do you want me to paste first?
[03:21] <Bashing-om> bynarie: While waiting, ya might profit from : http://ubuntuforums.org/showthread.php?t=2147295 <- UEFI Installing - Tips.
[03:22] <codepython777> is anyone using ubuntu natively on macbook pro here?
[03:22] <bynarie> Bashing-om, now somethin else wierd happened.. mouse worked perfectly fine.... but the keyboard kept sending "u" to the program
[03:22] <bynarie> just repeatedly kept showing uuuuuuuuuuuuuuuuuuuuuuuuuu
[03:22] <bynarie> like as if someone was holding the u button down
[03:23] <bynarie> im done messing up it right now
[03:23] <bynarie> i got this system so i guess ill leave it be
[03:23] <Bashing-om> bynarie: I saw that same circumstance of u with overhead ^ yesterday here on the channel, did not note the solution though.
[03:23] <rasteroid> bynarie: try disabling key repeat and then re-enabling it
[03:23] <bynarie> i just wanted to experience type of the line hardware with linux
[03:24] <bynarie> top****
[03:24] <bynarie> i will give it a shot tomorrow
[03:24] <bynarie> im flustered right now
[03:24] <rasteroid> bynarie: there appears to be several issue with keys repeating, but no one has found root cause yet
[03:24] <bynarie> ok
[03:25] <rasteroid> bynarie: and yes, it's biting me, too
[03:25] <bynarie> lol
[03:25] <bynarie> are you having problems too?
[03:26] <rasteroid> bynarie: yes
[03:26] <bynarie> what kind of system are you trying to run it on?
[03:26] <rasteroid> bynarie: it's happened with two different bluetooth keyboards
[03:26] <rasteroid> bynarie: trusy
[03:26] <bynarie> wow that sucks
[03:26] <bynarie> during install period or actually running it?
[03:27] <bynarie> sounds like a software isssue then more than a hardware if its happened to multiple people/devices
[03:27] <rasteroid> bynarie: running it, on previously installed systems. that's why i bought the second keyboard
[03:27] <bynarie> oh i see
[03:27] <rasteroid> bynarie: i thinks it's usb/bluetooth level, but there's not evidence
[03:27] <rasteroid> bynarie: s/not/no/
[03:28] <monkers> what should the permissions on /var be ?
[03:29] <rasteroid> monkers: 755 root.root
[03:29] <bynarie> yes
[03:29] <bynarie> monkers, deffinitely not 777
[03:29] <rasteroid> monkers: ie. rwx rw rw
[03:29] <bynarie> nevermind...
[03:29] <rasteroid> monkers: not at all, /etc contains the config files
[03:30] <wormmd> Hey all. Just installed Trusty on an HP Pavilion zv6000, ran firmware-b43-installer, rfkill shows no hard or soft block on phy0, but my wifi hard switch light is off (won't turn on) and wpa_supplicant reports that my wifi is hard-blocked. What do you want me to paste first?
[03:30] <monkers> - drwxr-xr-x  14 root root  4096 Jul 22 17:28 var
[03:30] <rasteroid> monkers: that looks right
[03:31] <ColdIce> i bash script, how can I get a file from the same directory as the script?
[03:31] <monkers> but its not rw rw
[03:31] <rasteroid> monkers; my bad, 5 is rx, because daemons running as nobody,etc. need to be able to read the configs
[03:32] <monkers> here's the error im getting - PID dir: /var/run/sickbeard must be writable (write permissions)
[03:32] <Blue11> I am having problems playing a bluray movie -- http://picpaste.com/bluray-QeOS9eVR.png
[03:32] <monkers> oh i see the pro
[03:32] <monkers> prob
[03:32] <monkers> nvermind ty
[03:33] <rasteroid> monkers: on trusty, var/run is a symlink to /run, and it also has 755
[03:33] <Bashing-om> bynarie: As you do not see install options : are you installing as a 'server' or the 'desktop' version ?
[03:33] <wormmd> New info: ifconfig reports no wlan0 :( Working on that.
[03:33] <lotuspsychje> Blue11: did you try vlc?
[03:33] <bynarie> Bashing-om,  im using the "desktop" iso, but there is no server/desktop option
[03:34] <bynarie> Bashing-om, i guess maybe i should have mentioned that im actually install Xubuntu.. dont know if that makes any difference???
[03:34] <monkers> rasteroid - should programs be able to write to it though?
[03:35] <Bashing-om> bynarie: Nope, I still expect you to see install options for the desktop install at that initial install screen .
[03:35] <bynarie> nope
[03:35] <bynarie> never have
[03:36] <bynarie> Bashing-om, i have installed xubuntu on VMs and this laptop im on now... never seen it.
[03:36] <bynarie> several times
[03:36] <bynarie> Bashing-om, not even a package selection screen
[03:37] <Bashing-om> bynarie: Like I say though, no experience with UEFI installs, wait for those who have had that experience to have good guidance.
[03:38] <bynarie> Bashing-om, ok will do.... thank you for your help tho
[03:38] <monkers> can someone check what the permissions are for /var on trusty?
[03:39] <bynarie> 755
[03:39] <bynarie> rwxr-xr-x
[03:39] <Bashing-om> monkers: "drwxr-xr-x  13 root root  4096 Mar 13  2014 var" .
[03:39] <monkers> ty
[03:40] <bynarie> d means what Bashing-om ?? i know x=exec, w=write, r=read
[03:41] <linuxuz3r> hi
[03:41] <bynarie> im pretty new to *nix in general
[03:41] <linuxuz3r> yes
[03:41] <linuxuz3r> thats right bynarie
[03:41] <Bashing-om> bynarie: as in "drwxr-xr-x" then the 'd' is for (d)irectory.
[03:42] <bynarie> go figure... d for directory =]
[03:42] <bynarie> thanks
[03:42] <Blue11> I am having problems playing a bluray movie -- http://picpaste.com/bluray-QeOS9eVR.png
[03:42] <Bashing-om> bynarie: see: https://help.ubuntu.com/community/FilePermissions .
[03:44] <wormmd> Attempting to blacklist hp_wmi, back in a flash.
[03:46] <bynarie> Bashing-om, so one more question... using the -rwxrwxrwx, is that the same as using numbers? 777?
[03:47] <bynarie> considering the numbers are correct
[03:48] <rasteroid> bynarie: yes, they are binary masks, 4 + 2 + 1
[03:48] <bynarie> ok
[03:49] <rasteroid> 4 =  read, 2 = write, 1 = exec, thus 644 means rw- r-- r--
[03:50] <Bashing-om> bynarie: Yep .. 4=3=1 = 7 ; where r=4 w=3 x=1 .
[03:50] <cuddylier> tcp6       0      0 162.252.10.149:25565    :::*                    LISTEN
[03:50] <rasteroid> w = 2
[03:50] <cuddylier> Anyone know if that is even a process? Port 25565 on all IPs seems to be taken up
[03:51] <Bashing-om> rasteroid: byn thanks ! ^^ .
[03:51] <wormmd> Hey all, still no luck after blacklisting the hp_wmi kernel mod.
[03:51] <rasteroid> cuddlyer : run 'netstat -lpt'
[03:53] <bynarie> Bashing-om, you seem very knowledgeable in *nix. Thank you for sharing with me
[03:54] <bynarie> Im trying to really dig into it and learn what i can
[03:54] <rasteroid> monkers: sorry, was playing guitar. the point of r-x is that you can't open a directory if you don't have  'x'
[03:54] <bynarie> I bought a book called "ubuntu unleashed", Bashing-om , do you know if this a good book?
[03:54] <Bashing-om> bynarie: Just been around for a while ! .. There is more I do not know than otherwise.
[03:54] <DF3D2> so I've had a Seagate 2tb die after 1 year, and a 3tb die after 1 year. Is western digital any better?
[03:55] <DF3D2> or am I just fucked to keep buying the same hardware over and over
[03:55] <lotuspsychje> !ot
[03:55] <bynarie> hehe... being modest
[03:55] <Bashing-om> bynarie: Do not know for sure, who are the author(s) ?
[03:55] <Blue11> I need some help with trying to play a blu ray movie
[03:55] <lotuspsychje> Blue11: did you try vlc?
[03:55] <bynarie> Bashing-om, Matthew Helmke
[03:56] <lotuspsychje> !details | Blue11
[03:56] <bynarie> I actually got "the official ubuntu book" 2013 and "ubuntu unleashed" 2014
[03:56] <bynarie> both by Matthew Helmke
[03:57] <lotuspsychje> bynarie: please us #ubuntu-offtopic to discuss books
[03:57] <bynarie> lotuspsychje, ok
[03:58] <Bashing-om> bynarie: Can not comment on that, does not ring any bells, one way or the other ..Years back my indroductory book was Hill Bacon Burger Jesse Krstic release of " The Officialubuntu book" .. (still on my desktop !)
[03:58] <Blue11> lotuspsychje: yup it doesn't work
[03:59] <lotuspsychje> !bluray | Blue11
[03:59] <rasteroid> bynarie: i learned via Sorcery/SourceMage, but LFS or Gentoo would be just as good of an entry point. Eventually one gets tired of compiling all the time and just wants to get some work done.
[03:59] <bynarie> rasteroid, I agree on the compiling issue LoL
[04:00] <Bashing-om> rasteroid: bynarie Any way we learn linux is a good way !
[04:00] <bynarie> yes
[04:00] <rasteroid> Bashing-om: agreed
[04:01] <rasteroid> Bashing-om: for me it was the ease of installation that drew me to ubuntu, but i do admit i prefer the (x)ubuntu flavor
[04:02] <Bashing-om> bynarie: cavaet: It does take time effort and thinking .. and great that no one person can learn it all . The process is never ending as the OS evolves so rapidly.
[04:02] <rasteroid> Bashing-om: i frequently need to use multiple drives, etc. and Ubuntu was the easiest distro to use and accomplish that, which is why i use it to this day
[04:03] <Bashing-om> rasteroid: I messed about a lot with other linux's back in the day, what sold me on ubuntu was documentation !
[04:03] <rasteroid> Bashing-om: community is another good reason
[04:03] <Bashing-om> +10 ^^
[04:05] <Bashing-om> rasteroid: My 1st installs of (k)ubuntu, I made it very difficult for myself, as I knew no better !
[04:05] <bynarie> Bashing-om, rasteroid I Agree. Anything based upon debian/ubuntu seem to have very good support threads/information
[04:06] <Blue11> lotuspsychje: right it plays dvd's fine - just not blu ray
[04:06] <wormmd> Hey all, having a wifi issue on an HP Pavilion zv6000, can't seem to get the hard kill button to work.
[04:06] <bynarie> wormmd, elaborate please for others to better understand what exactly is wrong
[04:07] <bynarie> wormmd, is the actual button the issue? or are you saying its something to do with linux
[04:07] <bynarie> ?
[04:07] <rasteroid> Bashing-om: my first install of sorcery was easy; i knew i had to build a kernel, and that all my drives were on a tekram scsi, therefore the LSI driver had to be in the kernel and not a module. but sorcery gave me install flexibility that freebsd and opensuse did not. when they had issues with continuity i came to ubuntu, and have been here ever since (6.04 LTS)
[04:08] <bynarie> I started out on linux-mandrake(now called mandriva I think). I do believe its a redhat based dist. But after I found ubuntu, i havent looked back either
[04:10] <wormmd> Love it when noobs go IRC White Knight ;) rfkill reports no hard or soft block, but wpa_supplicant reports a hard block. Additionally, the light on the wifi switch doesn't seem to be operational, which doesn't bode well. Thoughts?
[04:10] <rasteroid> bynarie: yeah, it's mandriva. yum is much better than it was, but they still have nothing like apt-cacher
[04:11] <rasteroid> why would i want all my machines to have to download packages over and over again?
[04:11] <Bashing-om> rasteroid: Whoh ! You do go back aways .. Me server applications with 'buntu 9.04 .. then (K)ubuntu as a desktop, found (u)buntu prefered it over the eye candy .. now I run a roll my own .. and am a happy happy camper.
[04:11] <rasteroid> Bashing-om: i was using BeOS before that ;-)
[04:12] <bynarie> rasteroid, Bashing-om , what desktop(i think its called) do you guys run? Im currently running xfce.. i like how it is lightweight compared to unity/gnome3
[04:12] <Bashing-om> rasteroid: Getting way off topic .. but You are a mean old man - to go back that fer with that !
[04:13] <rasteroid> Bashing-om: maybe, but I like Be, and a former colleague works on Haiku
[04:14] <rasteroid> bynarie: I use X(ubuntu) and almost always have. I like minimalism, espcially in my techno ;-)
[04:14] <Bashing-om> bynarie: DEs are a personal choice .. I too run xfce as my preference -- but, they are falling behind - need all the help they can get. xfce not to happy with GTK3 .
[04:15] <bynarie> awesome
[04:15] <lotuspsychje> we have such a nice channel to discuss nobody ever use
[04:15] <lotuspsychje> !discuss
[04:15] <xulescu> hello IRC inhabitants, do you recommend hexchat as a good IRC client on Ubuntu?
[04:15] <rasteroid> wormmd: can he get 'dmesg | grep -i wlan'
[04:16] <lotuspsychje> xulescu: i swear by xchat, but thats just a flavor
[04:16] <rasteroid> xulescu: xchat here as well
[04:16] <wormmd> rasteroid: http://ix.io/eCO
[04:17] <Blue11> lotuspsychje: any other ideas on blu ray?  It won't play in vlc, and movie player comes up with:  http://picpaste.com/bluray-QeOS9eVR.png
[04:17] <rasteroid> wormmd: it's only two lines... look on google for Broadcom 4306 documentation
[04:18] <lotuspsychje> Blue11: did you install ubuntu-restricted-extras ?
[04:20] <lotuspsychje> Blue11: try running vlc from terminal, then play your bluray and see what error you get
[04:21] <Blue11> lotuspsychje: yes a long time ago.
[04:24] <ferr> Any ideas why settings can not be saved and after reboot its reset?
[04:24] <rasteroid> Blue11: have you ever been able to play a bluray in linux?
[04:25] <rasteroid> Blue11: or did it suddenly fail, indicating a regression from previous functionality?
[04:25] <Blue11> rasteroid: this is my first time trying a bluray ever
[04:27] <rasteroid> Blue11: it doesn't work, and i can't tell you why not. but for a direction for your enquiries you will need to research matroska (.mkv). i have a number of large (>20G) files that have ac3 audio and 1080p video and loads of subtitles, but i can't tell you how i got them ;-)
[04:30] <Blue11> rasteroid: it's given my an error:  open of bluray:///yada failed
[04:31] <rasteroid> Blue11: sure, in order to even read the device you need special libraries. look for libdvdread and libcdparanoia files. also check brasero for libraries required to read/write BDs.
[04:32] <Blue11> rasteroid: I can burn bluray fine - just can't play them.  it plays dvd's fine
[04:33] <lotuspsychje> Blue11: what error you getting on vlc?
[04:33] <AzureX> sorry if i missed this but what application are we using
[04:33] <rasteroid> Blue11: what format of file are you creating?
[04:33] <Blue11> lotuspsychje: open of bluray:///dev/dvd1 failed
[04:33] <Lakers_business> lol call me different and i dont know if anybody even heard of Arachne but does this old browser play youtube videos ?
[04:33] <blancowilliam> Hola
[04:34] <rasteroid> Blue11: is this a file you created, and if so, what kind of file is it?
[04:34] <blancowilliam> Hello
[04:34] <blancowilliam> hello
[04:34] <Wh1t3Rabbit> Hi - so I'm running the latest patch update and BASH is still vulnerable. What's up?
[04:34] <Lakers_business> lol call me different and i dont know if anybody even heard of Arachne but does this old browser play youtube videos ?
[04:34] <HandleHard> hi
[04:34] <blancowilliam> i am speak spanish :c
[04:34] <rasteroid> Wh1t3Rabbit: determined how?
[04:35] <lotuspsychje> !shellshock | Wh1t3Rabbit
[04:35] <blancowilliam> i speak little english
[04:35] <Lakers_business> My firefox 31 is messed up and i cant watch youtube videos.
[04:35] <Wh1t3Rabbit> http://www.nopsec.com/blog/entry/shellshock-me-baby-one-more-time
[04:36] <lotuspsychje> Wh1t3Rabbit: whats your bash version ?
[04:36] <lotuspsychje> !info bash
[04:36] <Wh1t3Rabbit> version 4.3.11(1)-release
[04:36] <rasteroid> bash --version
[04:37] <rasteroid> Wh1t3Rabbit : run this - env var='() { ignore this;}; echo vulnerable' bash -c /bin/true
[04:38] <Wh1t3Rabbit> true
[04:38] <Wh1t3Rabbit> so then ... what
[04:38] <rasteroid> Wh1t3Rabbit: no worries
[04:39] <lotuspsychje> Blue11: did you try manually browse to dvd? maybe its /dev/sr0 or somthing?
[04:39] <rasteroid> 'vulnerable' would be a problem
[04:39] <Wh1t3Rabbit> hence my concern
[04:40] <Blue11> lotuspsychje: sudo blkid said it's /dev/sr1 -- so I know that much
[04:40] <lotuspsychje> Blue11: try to open the location with vlc
[04:41] <Wh1t3Rabbit> I really, really dislike the new Ubuntu interface - most of the apps aren't findable anymore
[04:41] <Wh1t3Rabbit> no update manager?
[04:41] <daftykins> Wh1t3Rabbit: try xubuntu
[04:41] <lotuspsychje> Wh1t3Rabbit: ubuntu has never been so good as now
[04:41] <rasteroid> Wh1t3Rabbit: over the course of this issue that command has returned various errors if it didn't return 'vulnerable'. if it still doesn't it should be fine, but look for new exploits and tests for them
[04:41] <Wh1t3Rabbit> and Bash (in Software Update Center) swears its updated - but still vulnerable
[04:42] <lotuspsychje> Wh1t3Rabbit: how did you test if its vunrable?
[04:42] <Lakers_business> Whoa this crap is old.who seen Arachne in action?I might just install Dosbox.WTF
[04:42] <Wh1t3Rabbit> hold up
[04:43] <Wh1t3Rabbit> well, this is weird, I got the 'vulnerable'  echo once, and now the last 4 times it's come back as "hello"
[04:44] <Wh1t3Rabbit> definitely something odd going on
[04:44] <lotuspsychje> Wh1t3Rabbit: what tool are you using, and local or remote?
[04:44] <Wh1t3Rabbit> which bash
[04:44] <Wh1t3Rabbit> oops
[04:44] <Wh1t3Rabbit> it's local on this box
[04:44] <Blue11> lotuspsychje: I have that's where I got the open of bluray:///dev/sr1 failed
[04:45] <krasnayarsk> which Terminus consolefont / or just consolefont, has Polish characters? I need Polish consolefont characters.
[04:47] <Lakers_business> Whats a archne-like browser alternative?My default browser is messed up lol.
[04:48] <Lakers_business> no chrome or ie suggestions lol!
[04:49] <droidbuster> I was upgrading my server from 10 whatever to 12.04 and somehow when i read the details on a version to replace i didnt exit the changelog in text editor. so i accidently exited the upgrade midway through. i am only able to login to recovery and all the commands i have tried result in telling me i need to run sudo dpkg --configure -a
[04:49] <lotuspsychje> Lakers_business: i like links2
[04:50] <droidbuster> however i get an error dpkg error unable to access dpkg status area Read only... wtf
[04:50] <lotuspsychje> droidbuster: maybe the #ubuntu-server guys might know your issue?
[04:50] <droidbuster> lot. ok
[04:51] <Lakers_business> lotuspsychje:never heard of it is it lightweight like and can it play youtube vids?
[04:51] <droidbuster> and it is pertent to here also... same version just no gui
[04:52] <lotuspsychje> Lakers_business: no, its a text like browser from terminal
[04:52] <droidbuster> same problem you get erroring during upgrade
[04:54] <cyphase> i want to ssh into my computer and have all the same environment variables in that shell as when i open a terminal on my desktop. what's the best way to do that?
[04:54] <droidbuster> I was upgrading from 10.04  to 12.04 and somehow when i read the details on a version to replace i didnt exit the changelog in text editor. so i accidently exited the upgrade midway through. i am only able to login to recovery and all the commands i have tried result in telling me i need to run sudo dpkg --configure -a
[04:55] <linuxuz3r> xD
[04:55] <Bashing-om> droidbuster: Did /etc/apt/sources.list get upgraded to 'trusty' ? Then maybe some hope.
[04:56] <droidbuster> Bashing-om:  i am not sure how to check in this recovery state
[04:56] <rasteroid> droidbuster: it might be that certain partitions are mounted read-only. you should check what 'mount' reports, and if necessary run 'mount -o remount, rw dev/<device>'
[04:56] <phoenixz> Trying to install Kubuntu in a machine with an NVidia 7990 card, on graphics start I see only garbled white with crap screen.. I do have text mode. Can I somehow install Kubuntu in text only, then install the nvidia drivers?
[04:56] <phoenixz> or, alternatively, install the nvidia drivers in text only?
[04:56] <phoenixz> or, what drivers do I need to install for 7990 support? I see nvidia-173 for example, but I have no idea if thats the right one or not..
[04:57] <phoenixz> I suppose I could install the drivers in the text console, but I do not know which one
[04:57] <phoenixz> Normally I would use some GUI program for that
[04:57] <rasteroid> droidbuster: that's '/dev/<device>'
[04:57] <Bashing-om> droidbuster: Got a desktop liveDVD handy ? and check the sources from the liveDVD ??
[04:58] <droidbuster> Bashing-om:  according to sources.lst it was modified today so i assume it has been updated but
[04:58] <droidbuster> Bashing-om:  no cdrom :(
[04:58] <Lakers_business> lotuspsychje:Hey have you even heard of Arachne.yeah lotuspsychje, its super old but i think it can run under dosbox?I just maybe might spend my night trying it lol.just curious thats all lol.
[04:58] <lotuspsychje> phoenixz: you have internet enable during setup?
[04:58] <ol_dude67> am trying to get a ati hd 4200 onboard chip to play vga and hdmi with the right res. any good docs to start reading?
[04:59] <lotuspsychje> phoenixz: the driver ubuntu chooses is in most cases also best to choose
[04:59] <h16h> is 192.168.3.0 valid under 255.255.252.0 ?
[05:00] <droidbuster> right now i am just looking to get past my dpkg interrupted error it will resume
[05:00] <lotuspsychje> h16h: try the ##networking channel
[05:01] <droidbuster> h16h:  yes it is but this is not the channel
[05:01] <Bashing-om> droidbuster: One can try as root : apt-get autoremove , apt-get clean , apt-get update , apt-get upgrade , apt-get dist-upgrade , apt-get -f install , pkg --configure -a ... Good luck !
[05:02] <droidbuster> Bashing-om:  correct and thankyou i just googled it as i thought here i would have someone for step by step but i am going to force it
[05:03] <Wh1t3Rabbit> so UCLA is having a bad night
[05:03] <Bashing-om> droidbuster: If dpkg is locked then lsof -> fuser to rm the loack ( might knock the server down and have to restart .
[05:03] <phoenixz> lotuspsychje: well, I only have a white screen with weird.. mess.. I see a window rectangle that appears rendered correctly, but the contents of that iwndow are also a mess
[05:04] <droidbuster> Bashing-om: i already rebooted twice and still locked
[05:04] <phoenixz> So my guess would be that the driver is not right :P
[05:04] <droidbuster> ......... lsof -> fuser read only file system
[05:05] <Bashing-om> droidbuster: sudo lsof /var/lib/apt/lists/lock , sudo rm /var/lib/apt/lists/lock
[05:05] <droidbuster> Bashing-om:  trying now
[05:07] <droidbuster> Bashing-om:  rm : cannot remove `/var/lib/apt/lists/lock' : read only file system :/
[05:09] <bynarie> i just read the topic. What is a "Channel Troll"?
[05:10] <cyphase> for anyone wondering, or for anyone searching logs later, this post is the solution to the problem of connecting to the desktop dbus session from an ssh session: http://ubuntuforums.org/showthread.php?t=1059023
[05:10] <SchrodingersScat> bynarie: anyone trying to go against !guidelines or disobeying an Op here.
[05:11] <bynarie> oh ok i never had heard of it before thanks
[05:11] <Bashing-om> droidbuster: So much for my next ! .. OK, can you boot to grub -> recovery and remount the OS read/write ?
[05:11] <cyphase> i suggest using the one-liner, with gnome-session as the process whose environment you're using
[05:11] <droidbuster> Bashing-om: yes i can i justy did
[05:11] <droidbuster> http://ubuntuforums.org/showthread.php?t=1793058&page=2
[05:12] <droidbuster> Bashing-om: skip mount or manual is always where i am stuck
[05:15] <Bashing-om> droidbuster: sounds like ya need to check/repair the file system, problem is that must be done with the file system unmounted - usually done from liveDVD(USB) ! .
[05:16] <Bashing-om> droidbuster: Nother way ! can you get to any terminal ? -> sudo touch /forcefsck , sudo shutdown -r now .
[05:22] <Bashing-om> droidbuster: Can you still get into recover, mount / read/write and run the fsck shutdown ^ ?
[05:25] <droidbuster> i will try what am i mounting
[05:27] <droidbuster> Bashing-om: i will try what am i mounting
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass..
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass..
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <cfhowlett> !ops | dauerschlaf
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass..
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass..
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:32] <unopaste> dauerschlaf you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[05:32] <droidbuster> !op
[05:32] <droidbuster> help
[05:33] <Ser1alPois0n> Why did I join this irc?
[05:33] <Ser1alPois0n> Looks mostly like spam.
[05:33] <phoenixz> Ser1alPois0n: One of life's deeper questions...
[05:33] <droidbuster> Ser1alPois0n: no just one person whos been taken care of
[05:33] <Ser1alPois0n> Okay
[05:34] <Ser1alPois0n> Wait... XChat can be put through Tor? Wtf
[05:35] <phoenixz> So anybody who might know what ubuntu driver to install for a 7990 card on the ubuntu installer? Because out of the box? not working.. I'm in text mode, I have internet, I can install whichever, but I have like 20 and I don't know which is the right one
[05:37] <Ser1alPois0n> From askubuntu.com: # eg Upgrade from AMD Catalyst 13.2 beta 2 to 13.2 beta 3
[05:37] <Ser1alPois0n> # Go into your Downloads folder (I suppose you have already download the driver)
[05:37] <Ser1alPois0n> cd Downloads
[05:37] <Ser1alPois0n> # Make the package executable
[05:37] <Ser1alPois0n> chmod +x amd-driver-installer-catalyst-13.2-beta3-linux-x86.x86_64.run
[05:37] <Ser1alPois0n> # Create deb packages for precise (12.04) or quantal (12.10)
[05:37] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:37] <unopaste> Ser1alPois0n you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[05:37] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:37] <dauerschlaf> I had a boyfriend named "Ubuntu" once.  He would "play the bongos" on my ass.
[05:37] <phoenixz> sigh, droidbuster...? a hand please?
[05:38] <omosoj> hey guys, i have a basic linux command line question. how do i make a shortcut, so that if i type a string a file will execute?
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <Ser1alPois0n> Omg
[05:38] <droidbuster> phoenixz: yes ?
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <bitg> WTF
[05:38] <Ser1alPois0n> Pheonix, I pasted the fix.
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <droidbuster> !op
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:38] <droidbuster> im not an op i forget how to page them
[05:38] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <droidbuster> !buzz
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <bitg> ?whois sitology
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <droidbuster> !help
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <omosoj> quit
[05:39] <mozzarella> !op
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <droidbuster> !flood
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <cyphase> !klaxxon
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:39] <phoenixz> Great going unopaste, Ser1alPois0n gets blocked, but this troll gets to have his fun
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <droidbuster> !spam
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <mozzarella> droidbuster: it's !op
[05:40] <Ser1alPois0n> Wtf
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <bitg> I dont think asking him nicely will change anything
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <droidbuster> i paged lol
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <HandleHard> ??
[05:40] <droidbuster> its been forever since i was in here regulary
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:40] <phoenixz> I have been gone quite a while too, what the hell happened to this place?
[05:40] <droidbuster> Bashing-om: i fixed it thanks for your advice
[05:40] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <Ser1alPois0n> He's behind Tor, I can't do shit.
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <malkauns> someone getting beheaded right now?
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <droidbuster> phoenixz: not enough admins here aparently
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <droidbuster> !admin
[05:41] <sitology> v
[05:41] <sitology> v
[05:41] <sitology> vALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <cyphase> lol
[05:41] <mozzarella> !op
[05:41] <phoenixz> droidbuster: yeah, so I've noticed... we really could use one..
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <droidbuster> just type !op
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <droidbuster> !op
[05:41] <phoenixz> sitology: forgeting the CTRL there, eh?
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:41] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> NO LEARNING FOR YOU FAGGOT
[05:42] <cyphase> troll can't even use a script
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <Gully_foyle_Jay> FUCK ANIME!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <droidbuster> mozzarella: i dont even have access to request an OP anymore
[05:42] <phoenixz>  Pici, Myrtti, jrib, Amaranth, tonyyarusso, Nalioth, lamont, CarlK, elky, mneptok, PriceChild, Tm_T, jpds, ikonia, Flannel, genii, wgrant, stdin, h00k, IdleOne, nhandler, Jordan_U, popey, Corey, ocean, cprofitt, djones, Madpilot, gnomefreak, lhavelund, k1l, rww, phunyguy, bazhang : one of you guys, PLEASE? a hand? get sitology kicked?
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <Ser1alPois0n> I would DDoS him if he weren't behind Tor.
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:42] <Gully_foyle_Jay> help we need mods
[05:42] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <Ser1alPois0n> MODS!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <droidbuster> Ser1alPois0n:  lol :)
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <Gully_foyle_Jay> MOB
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <Gully_foyle_Jay> MODS!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <cfhowlett> !ops | sitology
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <sitology> ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR! ALLAH AKBAR!
[05:43] <elky> cfhowlett: we are kind of aware
[05:43] <sitology> hahhahaha
[05:43] <sitology> suck my dick you fucking faggots!!!!!
[05:43] <sitology> muahahahahahahaa
[05:43] <sitology> niggers
[05:43] <sitology> niggerfaggottttts!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[05:43] <sitology> suck a cock nigger
[05:43] <unopaste> sitology you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[05:43] <droidbuster> elky:  it has been going on for 15 mins.
[05:43] <Mr_Sheesh> ty unopaste
[05:44] <phoenixz> LOL
[05:44] <dauerschlaf> !ops cfhowlett is a fucking little bitch trying to tell on me because i know he's a faggot
[05:44]  * rww looks up
[05:44] <dauerschlaf> !ops cfhowlett is a fucking little bitch trying to tell on me because i know he's a faggot
[05:44] <phoenixz> Great going unopaste, THAT somehow did it?
[05:44] <droidbuster> elky:  dauer is the other flooder
[05:44] <Blue11> YaY
[05:44] <phoenixz> THANK YOU! :)
[05:44] <Ser1alPois0n> All Tor nodes should be blocked.
[05:44] <droidbuster> Blue11: they will be back :(
[05:44] <cyphase> and the Unbeliever was struck down, and cast into the Fire; and all was right with The World
[05:44] <rww> anyone I missed?
[05:44] <droidbuster> rww:  not at the moment
[05:44] <cfhowlett> cyphase, ???  you too?
[05:44] <rww> unopaste: lol, u r teh competent
[05:45] <Blue11> droidbuster: yup but for now they are dead, jm
[05:45] <Blue11> jim
[05:45] <rww> droidbuster: thanks
[05:45] <OERIAS> dauerschlaf is funny gentleman
[05:45] <droidbuster> sitology was the worst flooder
[05:45] <droidbuster> and hes unbanned now ?
[05:45] <rww> droidbuster: nope
[05:45] <rww> ubottu: feedthetroll | OERIAS
[05:45] <elky> droidbuster: unopaste was trying to quiet him. he removed the quiet because it's now unnecessary.
[05:46] <rwp> Thanks Ops!
[05:46] <OERIAS> rww, I will indeed
[05:46] <droidbuster> elky:  yes but either way what is it with the flooding idiots probably 12 or something
[05:46] <rww> droidbuster: doesn't matter. let's get back to support
[05:46] <droidbuster> so ok i fixed my problem :)
[05:46] <Ser1alPois0n> I was muted for trying to help someone by pasting instructions... unopaste waited 15 mins to mute it for spam...
[05:47] <rww> Ser1alPois0n: yes, it's a very competent bot, and the relevant people have been notified of its competence
[05:47] <Blue11> loL
[05:47] <droidbuster> it finished the upgrade with errors but now i can just reinstall the failed packages
[05:47] <droidbuster> :/
[05:47] <Bashing-om> droidbuster: Great, fully updated on the new upgrade now /// Looking better !
[05:48] <mrebola> Hi , everyone
[05:48] <Blue11> droidbuster: you can try a sudo apt-get install -f   90% of the time that fixes the problems
[05:48] <Blue11> howdy tex
[05:49] <droidbuster> Blue11:  not this time.... it was locked midway during the upgrade because i made a mistake
[05:53] <DF3D2> what do you do if an app won't die with kill -9 pid
[05:53] <DF3D2> it says "defunct"
[05:54] <Ser1alPois0n> xkill?
[05:55] <DF3D2> it's an init script (MPD) so xkill isn't relevant
[05:55] <DF3D2> according to the ubuntu forums it is already dead, but something is wrong because I can't restart the daemon tells me the bind to port is being used
[05:55] <Ser1alPois0n> Idk then. I've had a bit much to drink.
[05:55] <rww> !drink-#ubuntu-offtopic
[05:55] <Ser1alPois0n> Lol
[05:56] <Ser1alPois0n> Sorry
[05:56] <DF3D2> lol every one i'm talking to tonight on irc is drunk
[05:57] <DF3D2> well i did the easy fix and just changed the port
[05:57] <DF3D2> screw it lol
[05:58] <Ser1alPois0n> For some reason I can't SSH into my laptop.
[05:59] <Ser1alPois0n> I figured it out.
[05:59] <bynarie> hm
[05:59] <Ser1alPois0n> Apparently if my firewall is on I can't SSH into it.
[06:00] <cyphase> indeed
[06:00] <prajith> what is the best application for using torrent?
[06:00] <Ser1alPois0n> transmission
[06:00] <Dustin> im using rtorrent without any problems
[06:01] <DF3D2> I like rtorrent and the web gui
[06:01] <MagicHands> uTorrent hasn't failed meye
[06:01] <MagicHands> yet
[06:01] <bynarie> say i have a webserver running on port 80 and also my routers gui is port 80.... within the internal network i cant access the webserver but from outside the network i can.. using apache2 in ubuntu
[06:01] <bynarie> any ideas?
[06:01] <Ser1alPois0n> I like Transmission. Doesn't it come with Ubuntu out of the box?
[06:01] <cfhowlett> Ser1alPois0n, it does.
[06:01] <DF3D2> Ser1alPois0n, ya
[06:01] <Dustin> you have to limit transmissions upload slots and upload rate, if not, it will really mess your internet
[06:02] <prajith> yes transmission is there
[06:02] <prajith> what about qbittorrent?
[06:02] <DF3D2> bynarie, because your router is set not to allow the web gui from outside the local network so the first device that listens on 80 is the web server
[06:02] <DF3D2> you should see if you can change the port of the router web gui to something else.
[06:02] <cfhowlett> prajith, they all do the same thing.  use the one with your favorite look/feel
[06:02] <Snake2k> prajith: deluge
[06:03] <prajith> thanks guys, have a nice day
[06:03] <Dustin> bynarie: im having the same problem. It is because the router wont allow loopback
[06:03] <DF3D2> Dustin, that is not why
[06:04] <bynarie> well the odd thing is, it used to work fine
[06:04] <bynarie> just literally stopped working one day
[06:04] <Dustin> DF3D2, i can only access my domain from outside, not within my local network
[06:05] <Ser1alPois0n> Idk, IIS sucks.
[06:05] <bynarie> yes me too
[06:05] <DF3D2> what do you mean by domain exactl
[06:05] <DF3D2> your webserver ?
[06:05] <Dustin> when i try to acces my domain locally, it fowards to the router login page
[06:05] <DF3D2> yes I just explained why O_O
[06:05] <Dustin> yup, i have my domain forwarded to my wan ip
[06:06] <bynarie> if i type in my WAN IP, i get nothing... when i type in local router ip i get router gui(obviously)
[06:06] <DF3D2> okay hold on
[06:06] <DF3D2> are you guys running a machine with a local IP: say 192.168.1.2
[06:06] <DF3D2> and a webserver running on port 80?
[06:06] <bynarie> yes
[06:06] <Ser1alPois0n> When I put your IP I get taken to an IIS page.
[06:07] <bynarie> yes its iis
[06:07] <DF3D2> bynarie, so if you type http://192.168.1.2:80 in a browser you get your router page? what ip is your router
[06:07] <vitorpacheco> in sublime text, when I try to put some accent he gets before the word.
[06:07] <Ser1alPois0n> 99% of the time one could assume 192.168.1.1
[06:07] <bynarie> router ip is 192.168.1.1.
[06:07] <bynarie> i can access web gui with that
[06:08] <bynarie> now if i type in my WAN ip, it does nothing
[06:08] <DF3D2> bynarie, and what is the ip of your machine running the web server
[06:08] <bynarie> 192.168.1.109
[06:08] <DF3D2> bynarie, so if you (within the local network) type http://192.168.1.109:80 in a web browser, what occurs ?
[06:09] <bynarie> it loads the page
[06:09] <Ser1alPois0n> :80 isn't necessary
[06:09] <DF3D2> Ser1alPois0n, i'm well aware of that
[06:09] <Ser1alPois0n> Just http:///192.168.1.109
[06:09] <DF3D2> but i'm using it for specific reasons
[06:09] <Ser1alPois0n> Okay
[06:09] <DF3D2> im making sure his server is infact bound to port 80
[06:09] <Ser1alPois0n> I can assure that it is.
[06:09] <DF3D2> bynarie, okay it loads the webserver page ?
[06:10] <bynarie> yes it does
[06:10] <DF3D2> Ser1alPois0n, you can't assure anything because you aren't the one running his server
[06:10] <Ser1alPois0n> I can when I've scanned it
[06:10] <DF3D2> bynarie, okay I thought before you said that it does not work ?
[06:10] <DF3D2> Ser1alPois0n, fair enough but please, let's not confuse him
[06:10] <DF3D2> and this is why I use a vpn and a cloak on irc don't need anyone scanning me lol.
[06:10] <Ser1alPois0n> Lol
[06:11] <Ser1alPois0n> If I have anything to fear, I just hide behind Tor.
[06:11] <DF3D2> I have nothing to really fear, just better safe than sorry.
[06:11] <DF3D2> bynarie, so...? I thought your problem was it doesn't work on your local network but we have shown that it does infact work?
[06:12] <bisu> bynarie: i guess you need to change your DMZ  server address to 192.168.1.109 in your router
[06:12] <DF3D2> bisu, no he most definitely does not
[06:12] <bynarie> no
[06:12] <bynarie> im not doing that
[06:12] <Dustin> it will not work when he tries to type in his wan ip
[06:12] <DF3D2> and don't ever tell anyone to put on a dmz host
[06:12] <bynarie> dustin.. yes
[06:12] <bynarie> thats what i was saying.
[06:12] <DF3D2> bynarie, by wan IP you mean your external ip ?
[06:12] <bynarie> not that it really matters
[06:12] <bynarie> yea
[06:12] <DF3D2> you said that, that did work before
[06:13] <DF3D2> you said the local one did not work
[06:13] <DF3D2> ...
[06:13] <Ser1alPois0n> If you really NEED to do that, put on a proxy because your router won't allow loopback.
[06:13] <DF3D2> bynarie, if your webserver can't be reached from your external ip you need to open port 80 and forward it to 192.168.1.109 or whatever you said it was
[06:13] <DF3D2> easy enough...
[06:14] <bynarie> maybe i worded wrong... but before yesterday i could type in my domain name(bynarie.net ) which forwards to my ip address and access my server from inside the network
[06:14] <DF3D2> has your ip changed ?
[06:14] <bynarie> no
[06:14] <DF3D2> have you updated the dns that points to your ip?
[06:14] <Ser1alPois0n> I can access bynarie.net with no problem...
[06:14] <bynarie> yes
[06:14] <DF3D2> well then what the hell is the problem
[06:14] <Ser1alPois0n> It takes me to an IIS page.
[06:14] <bynarie> jeez
[06:15] <DF3D2> yes bynarie.net works fine
[06:15] <bynarie> i said from INSIDE the network I CANNOT access my website using the domain name bynarie.net or wan ip
[06:15] <DF3D2> you don't need to
[06:15] <DF3D2> for one thing
[06:15] <bynarie> i know i said this already
[06:15] <Ser1alPois0n> Right, we said your router won't allow loopback, that's why.
[06:16] <DF3D2> loopback as in 127.0.0.1 lol ?
[06:16] <bynarie> i was just trying to figure out why it doesnt work now as opposed to yesterday
[06:16] <DF3D2> my router doesn't prevent this...
[06:16] <Ser1alPois0n> Idk.
[06:16] <DF3D2> wait i'm tired
[06:17] <PolishPickers> me 2
[06:17] <DF3D2> obviously 127.0.0.1 has no router involved
[06:17] <DF3D2> lol
[06:17] <Ser1alPois0n> Yeah
[06:17] <Ser1alPois0n> Lol
[06:17] <DF3D2> geez don't do plumbing work all day then try to think about computers
[06:17] <DF3D2> it doesn't work
[06:17] <Ser1alPois0n> Lol
[06:17] <bynarie> lol
[06:17] <DF3D2> but I'm not understanding why he wouldn't be able to access his own ip basically?
[06:18] <Ser1alPois0n> Well, I'm a 16 year old with nothing better to do than do Java Programming and mess with a few servers.
[06:18] <bynarie> yea thats all im saying
[06:18] <DF3D2> if bynarie.net points to his wan ip
[06:18] <DF3D2> he should still be able to input that locally and have it work
[06:18] <bynarie> its NOT a big deal, just wondering
[06:18] <DF3D2> it makes no sense to me
[06:18] <bynarie> me neither
[06:18] <DF3D2> I can input one of my dns pointers and it points to my wan ip and it works
[06:19] <bynarie> because it doesnt point me to my router gui or webserver
[06:19] <Ser1alPois0n> http://forums.att.com/t5/Residential-Gateway/Will-using-your-own-router-allow-loopback-connections/td-p/3978948
[06:20] <Ser1alPois0n> ^There
[06:20] <Michael87> so I a have a question. I saw a video for clutterflow for banshee media player. reminded me off the good old days when itunes was loaded with cool features like that. So I was wandering if anyone has confirmed if it works on ubuntu 14.04 with the latest banshee installed
[06:20] <DF3D2> Ser1alPois0n, I guess the fios router is just smarter then
[06:20] <DF3D2> since loopback works by default for me
[06:21] <helmut_> hi
[06:21] <bynarie> that loopback theory makes no sense.... it just worked yesterday.. absolutely nothing changed
[06:21] <bynarie> i have asus rt-ac66u
[06:21] <bynarie> pretty decent router i think
[06:23] <DF3D2> bynarie, try a factory resrt of it
[06:23] <Ser1alPois0n> Why reset it?
[06:23] <Dustin> any firmware upgrade to the router before this problem?
[06:23] <Ser1alPois0n> Just enable NAT loopback.
[06:23] <bisu> DF3D2: if it worked yesterday, why reset it?
[06:23] <Dustin> Thanks Ser1alPois0n , ive gotta try that too :D
[06:23] <bynarie> Dustin, i did recently upgrade firmware... but, the problem started yesterday. The firmware upgrade happened about 2 weeks ago or so
[06:24] <Dustin> bynarie, try NAT loopback as Ser1alPois0n suggested
[06:25] <NGC6205_1> hmm, did something change recently that would explain why my screen has stopped turning off after a few seconds when I lock my computer? Only noticed it last night and tonight.
[06:26] <nusr> sorry not ubuntu related but this is the only channel i know where people actually help..was on economics dozen of people but no one speaks..how can i search for channels? i'm looking for finance related for help
[06:27] <xangua> !alis | nusr
[06:30] <Ser1alPois0n> I'm going to bed. I've been staring at these bright monitors in the dark for too long.
[06:48] <CaffeineAddict> I have a server with a client that connects to it via tcpip.  The connection is kept open for long periods of time and occasionaly the router on the clients end gets hard rebooted.  Since the tcpip connection isnt officialy ended the server still has an open connection ... is there a way to force ubuntu to resolve these?
[06:49] <CaffeineAddict> short of rebooting the server
[06:52] <bynarie> hello
[06:55] <rwp> CaffeineAddict, Change the keepalive times so that they timeout sooner. http://www.tldp.org/HOWTO/TCP-Keepalive-HOWTO/usingkeepalive.html
[06:55] <CaffeineAddict> ty rwp
[06:57] <CaffeineAddict> cat /proc/sys/net/ipv4/tcp_keepalive_time returns 7200
[06:58] <CaffeineAddict> im assuming seconds?  so in 2h it should drop these connections?
[06:58] <rwp> Yes, seconds.
[06:58] <rwp> yes, if keepalives are enabled for that tcp connection.
[06:58] <rwp> Can you say what type of server your tcp is serving?  Something home built?  or other?
[06:58] <rwp> You will probably need to enable keepalives.
[06:59] <CaffeineAddict> ubuntu 12 on a vps
[06:59] <rwp> You talking ssh then?
[06:59] <CaffeineAddict> standard digital ocean install
[06:59] <CaffeineAddict> no, hosting a server w/ node.js
[07:00] <rwp> I am unfamiliar with node.js. Sorry. But you will probably need to enable tcp keepalives.
[07:00] <CaffeineAddict> aka my bad code most likly
[07:00] <rwp> By analogy let me explain sshd and perhaps you can map that to your server.
[07:00] <CaffeineAddict> oh, so even though it says 7200 sec ... i have to enable it?
[07:00] <rwp> Look in /etc/ssh/sshd_config and look for the TCPKeepAlive setting.
[07:00] <rwp> It is either yes or no.
[07:01] <rwp> If yes then sshd will set keepalives on the server end.
[07:01] <rwp> TCP keepalives are controlled by the params you saw with a default being that it takes 2 hours or more to detect that a connection has dropped.
[07:01] <CaffeineAddict> TCPKeepAlive yes
[07:01] <rwp> Normally that is fine. Doesn't really matter that a server has a connection for that long.  But they will build up.
[07:02] <rwp> So the keepalive and looonnn timeouts allows sshd to reap dead connections.
[07:02] <CaffeineAddict> ok
[07:02] <rwp> But if this is something that is on a flakey network, say a radio link, then it might be good to reduce this so that things can detect failure and reconnect sooner.
[07:03] <rwp> Now how that could apply to your node.js server I don't know.  But perhaps you can map it there.
[07:03] <CaffeineAddict> yah, client is accrost the pond ... so it drops randomly ... I will have to put something in my server code to kill the connection
[07:03] <CaffeineAddict> ty for your input
[07:03] <rwp> We often joke that the keepalive is really a makedead.
[07:03] <CaffeineAddict> ;p
[07:04] <joehannes> hey nerds!!! anyone know if there's gonna be public phone releases with 14.10?
[07:04] <cfhowlett> !touch | joehannes, also ... nerds?  really?
[07:04] <matty_r> lol
[07:04] <joehannes> oh, touch, thx ...
[07:04] <joehannes> why not nerds?
[07:05] <cfhowlett> joehannes, why would you address anyone as "nerds".  think ...
[07:05]  * rwp prefers geek over nerd any day of the week
[07:06] <CaffeineAddict> http://thumbnails-visually.netdna-ssl.com/nerds-vs-geeks_531d53fba639f_w1500.jpg
[07:06] <CaffeineAddict> dont know ... i think im 50/50 split
[07:07] <joehannes> cfhowlett, rwp ... geek indeed is preferrable to me as well, but since I don't know much about the codability nature about the guys here, they are surely nerds, but geeks in my vocabulary is restricted to cod4s! :P
[07:07] <rwp> joehannes, nerd is a pejorative
[07:07] <xangua> !ot
[07:07]  * cfhowlett thoughtfully scratches his neckbeard 
[07:08] <joehannes> I'm definitely both as well
[07:08] <joehannes> rwp .. wtf is a pejorative?????
[07:08] <matty_r> Will the touch platform actually be any good?
[07:08] <cfhowlett> matty_r, "good"?  yes
[07:08] <rwp> They have these things call dictionaries!
[07:08] <joehannes> bot, be silent or kick my a*! but don't be no Douglas Crockford!
[07:08] <joehannes> sorry Douglas, grammer N*
[07:08] <matty_r> cfhowlett, What market are they aiming for?
[07:09] <cfhowlett> matty_r, people who use mobile phones
[07:09] <cfhowlett> !touch | matty_r
[07:10] <matty_r> Awesome :) well done
[07:10] <joehannes> bot, I know you're smart, but let's try this ... I've been searching these pages all day long and not found explicit info as to what and when and actually ... it's too superstitious! now got me?
[07:18] <joehannes> matty_r ... ok, now I've looked up pejorative and I see your point, but I would rather blame the hyping mechanism and general anti-knowledge as to the pejorativeness of Nerd ... and not accept the mark of pejorativeness on our very own L33t-words
[07:19] <matty_r> joehannes, , huh? I think you mean rwp
[07:24] <joehannes> oh, matty_r, rwp ... upps, sorry
[07:24] <joehannes> I think I caught a twist ... icecold *ggg*
[07:24] <rwp> np. We look a lot alike.
[07:26] <matty_r> some would say brothers from another mother
[07:31] <rwp> we went to different schools together
[07:32] <ikonia> ok, I think we've taken that "joke" as far as it needs to go in this channel please
[07:46] <bisu> what is the most beautiful piece of software in linux?
[07:49] <cfhowlett> bisu, wrong question.  what exactly do you need the software to do.
[07:50] <bisu> i am looking for good interfaces, like noise, geary are trying to make itself look beautiful, preferably a gtk+ based ui
[07:50] <ikonia> like noise ?
[07:50] <ikonia> geary ?
[07:50] <cfhowlett> !info geary
[07:50] <bisu> noise is the music player in elementary os
[07:51] <cfhowlett> bisu, you're question line is confusing.  alternate DE's are kde, xfce4, lxde               install all and choose a favorite.
[07:52] <cfhowlett> bisu, for speciifc apps, see software center
[07:52] <cfhowlett> bisu, and ubuntu tweak allows one to do some custom theming
[07:52] <bisu> i am looking for apps.
[07:52] <bisu> apps that are not ugly
[07:53] <ikonia> bisu: are you trying to make it look nice, or are you trying to get certain functionality ?
[07:53] <bisu> software center is fine
[07:53] <bisu> just looking for a some suggestions
[07:53] <ikonia> bisu: are you trying to make it look nice, or are you trying to get certain functionality ?
[07:53] <cfhowlett> bisu, we have no idea what you think is "beautiful".  all the things mentioned are free.  install and decide for yourself.
[07:54] <Joe_Spencer> hi
[07:54] <bisu> anything that looks good.. for examlpe.. sublime text is beautiful
[07:54] <bisu> ok..
[07:54] <ikonia> bisu: are you trying to make it look nice, or are you trying to get certain functionality ?
[07:54] <bisu> opinions vary.. so was looking for opinions
[07:54] <bisu> anyway
[07:55] <Joe_Spencer> can anybody help me where can i find the developer team?
[07:55] <ikonia> Joe_Spencer: what's the issue ?
[07:55] <Joe_Spencer> there is no issue, but i want to start a huge server system with ubuntu
[07:55] <ikonia> Joe_Spencer: ok, so how can we help you
[07:56] <Joe_Spencer> and i want to know some specification
[07:56] <ikonia> what do you want to know ?
[07:56] <Joe_Spencer> fist, i need to know the most supported server hardware list
[07:57] <ikonia> !hcl | Joe_Spencer
[07:57] <Joe_Spencer> or the other client pc hardware list
[07:57] <ikonia> Joe_Spencer: that list is not definitive, nor is it that well maintained,
[07:57] <ikonia> Joe_Spencer: but it is a good starting point
[07:58] <Joe_Spencer> thanks :) im on it
[07:59] <ikonia> Joe_Spencer: so you are aware, you don't need "developers" for this sort of question, just tell the people what you need and they will help if they can
[07:59] <cfhowlett> Joe_Spencer, perhaps #ubuntu-server channel might have more direct advice
[08:06] <Joe_Spencer> thank you ikonia and cfhowlett :)
[08:07] <cfhowlett> Joe_Spencer, happy2help
[08:20] <akiva-thinkpad> intltool: command not found <<< does anyone get this error when they try to run this program?
[08:24] <cfhowlett> akiva-thinkpad, same here
[08:25] <akiva-thinkpad> cfhowlett, nah i mistaked it, its intl-merge
[08:25] <akiva-thinkpad> thanks though
[08:25] <akiva-thinkpad> although I'm still having issues
[08:30] <visiteur_1> test
[08:43] <stoogenmeyer> hi how do i add a user to my server and have him be able to login using a .pem file and not using a password?
[08:43] <stoogenmeyer> i keep getting prompted for the password for some reason
[08:45] <ikonia> stoogenmeyer: login via what, a desktop or an ssh session ?
[08:45] <stoogenmeyer> sorry- i want to be able to ssh from my terminal
[08:46] <ikonia> so look at ssh keys
[08:50] <jimzz> 这个是用来作什么的
[08:50] <cfhowlett> !cn | jimzz
[08:52] <jimzz> thanks
[08:56] <cyber_dweller> strongswan help?
[08:57] <ikonia> cyber_dweller: what ?
[08:57] <cyber_dweller> http://pastebin.com/yzgN43LU
[08:57] <ikonia> rightdns is not a valid option
[08:57] <ikonia> it says so "unknown keyword"
[08:58] <ikonia> even shows you the line, (number 27)
[08:58] <cyber_dweller> ikonia, so how can i define the right dns and the ip address pool for it?
[08:58] <ikonia> no idea, never used the software
[08:59] <cyber_dweller> ikonia, hhh
[09:00] <bairui> I'm using xubuntu.   locale   shows that I'm using utf-8 for everything except   LANGUAGE=en_US   and   LC_ALL=   . I wrote a lua custom writer for pandoc that needs to popen some stuff through external processes. Pandoc complains that it isn't valid UTF-8 and sure enough the files show gibberish when i   cat   them. The   file   tool says they are UTF-8. Running   iconv -t utf-8   shows the same gibberish.
[09:00] <bairui> But if I do   iconv -t latin1   then it shows valid output.   WHAT am i doing wrong?
[09:09] <luc4> Hello! I would like to install ubuntu on a mac. I’ve been able to boot ubuntu by dd’ing the startup disk into a partition. When I boot that, it asks me to install. If I try to install, it fails. So what is the difference between the startup disk itself and a “real” installation?
[09:13] <Pidgey> 'morning
[09:13] <prajith> which is the best game for ubuntu? action
[09:14] <Pidgey> prajith: i just get steam and use my linux compatible games :p
[09:14] <Pidgey> or go to my dualboot windows 7 for games
[09:15] <prajith> is it possible to play all latest games using steam?
[09:15] <Pidgey> only if they're linux compatible
[09:15] <ikonia> no
[09:15] <ikonia> you want to play windows game, use windows
[09:15] <Pidgey> most games will let you know
[09:15] <ikonia> not at all
[09:16] <Pidgey> but my suggestion would be to use a windows dualboot for games
[09:16] <Pidgey> which is what i do
[09:16] <Pidgey> or play the sudoku or minesweeper, included in gnome/mate :p
[09:16] <ThaSwapMeetPimp> there are some awesome steam games though all the half-lifes, TF2, DOTA2, Shadowrun Returns and Dragonfall Directors Cut, Shadowrun Online just came out with the linux alpha
[09:16] <Pidgey> or most desktop interfaces, i suppose
[09:17] <ThaSwapMeetPimp> Unreal World RPG, FTL
[09:17] <ThaSwapMeetPimp> not to mention all the emulators
[09:17] <Pidgey> btw, i also have a question
[09:17] <Pidgey> but a bit more... technical :p
[09:17] <ThaSwapMeetPimp> PCSX2 was an even higher version than winblows for a minute or so there, if its not anymore
[09:18] <Pidgey> i have this D-Link DWA-131 dongle (with the rtl8192cu chip), but hostapd doesn't want to work with it
[09:18] <ThaSwapMeetPimp> I might be able to answer your qeustion
[09:18] <Pidgey> any idea?
[09:18] <ThaSwapMeetPimp> no clue
[09:18] <ikonia> ThaSwapMeetPimp: it's called windows not winblows - use the correct names please
[09:18] <Pidgey> hah :p
[09:18] <ThaSwapMeetPimp> no
[09:18] <ThaSwapMeetPimp> I dont like windoze
[09:19] <Pidgey> windows is good for games
[09:19] <Pidgey> and for beginners
[09:19] <Pidgey> gotta give at least credit where credit's due :p
[09:20] <Pidgey> but yeah, anyone else who might have an idea on how to fix this issue?
[09:24] <Pidgey> oh, and another question i have, i'm using mate with ubuntu, is there a way to click an application from the menu to launch it, but not have the menu close, so you can choose more aps to start?
[09:27] <FK_nero> #beyondunreal
[09:40] <BartlomiejB> hi.
[09:40] <Dustin> hi
[09:40] <Pidgey> hi there
[09:40] <houserockr> hi
[09:41] <BartlomiejB> my bluetooth mouse doesn't work. Ubuntu 14.04.1 LTS, laptop Acer S7-391. any hints?
[09:41] <Pidgey> are you using a bluetooth dongle with the mouse, or directly with the laptop?
[09:42] <BartlomiejB> directly with the laptop. mousee was included with the laptop, it works fine on Windows.
[09:42] <Pidgey> does bluetooth work on your linux machine?
[09:42] <Pidgey> as in, drivers, etc?
[09:43] <BartlomiejB> I think - yes. how to verify this?
[09:43] <Pidgey> i'm fairly new to ubuntu myself, sorry :/ but at least i can give you some pointers
[09:43] <Pidgey> gimme a sec, i'll take a look
[09:44] <Pidgey> okay, go to bluetooth manager
[09:44] <Pidgey> mine doesn't find any bluetooth addapters, cuz i haven't installed the drivers
[09:44] <Pidgey> what does it say for you?
[09:45] <BartlomiejB> you mean clicking the bluetooth icon on the tray area?
[09:45] <Pidgey> what desktop interface are you using?
[09:45] <Pidgey> unity?
[09:45] <BartlomiejB> yes.
[09:45] <Pidgey> well idk about unity (i hate it :p), but i suppose
[09:45] <Pidgey> go to the default start thing
[09:45] <Pidgey> and type "bluetooth manager"
[09:46] <BartlomiejB> yeah, OK, I got it.
[09:47] <sennn> i set my OSX to unity style, oh yeah !!!
[09:47] <BartlomiejB> well, I tried to find the mouse there, but it searches for new devices infinitely and  doesn't find my mouse.
[09:47] <Pidgey> oh, so you can search, at least?
[09:47] <BartlomiejB> yes
[09:47] <Pidgey> i suppose that means your driver, at least, is working
[09:48] <Pidgey> like i said, i'm not using ubuntu (or linux in general, for that matter) for too long
[09:48] <Pidgey> just going with my basic knowledge + computer experience here, so i might not be the most reliable :)
[09:48] <BartlomiejB> OK, thanks for your assistance anyway. :)
[09:49] <Pidgey> you're welcome
[09:49] <Pidgey> oh
[09:49] <Pidgey> maybe try, if you have a phone with wifi, if it finds that one
[09:49] <Voidzone> ubuntu phone!
[09:49] <Pidgey> i had a similar issue with my wireless driver in the past, that the card got recognised, but not the scanning function
[09:49] <Pidgey> do you see any bluetooth devices at all?
[09:50] <sennn> does ubuntu working on quantum computer？
[09:51] <sennn> if not then what system they use?
[09:52] <Pidgey> definitly not osx
[09:52] <BartlomiejB> Pidgey: yes, I can see my Android phone. I didn't finish pairing procedure, 'cos I dont need it now, but PIN was correctly send.
[09:53] <Pidgey> hmmm
[09:53] <Pidgey> well then i suppose your driver, at least, works
[09:53] <Pidgey> although, maybe try the pairing
[09:53] <Pidgey> cuz if the issue is with the pairing, it'd explain why the mouse wouldn't work
[09:53] <babel42> how can I check for malicious softerware in an zip file in ubuntu before extracting?
[09:53] <babel42> *software
[09:53] <Pidgey> since you don't have a display on the mouse :p
[09:53] <Pidgey> babel42: i use clamtk
[09:54] <Pidgey> i'm not sure if it can check BEFORE extracting tho
[09:54] <Pidgey> but that shouldn't matter tho
[09:54] <Pidgey> linux is made in a way, iirc, that execs won't execute automatically
[09:54] <Pidgey> most of the time, if you extract, the chmod should be non-executable anyway
[09:55] <Pidgey> so just extract it in a specific folder, and use clamtk ,or other AV, to scan it :)
[09:55] <babel42> thanks, Pidgey
[09:55] <Pidgey> you're welcome
[09:55] <m1st> Hello, how do I do a tunneling from an external ip to internal ip in ubuntu?
[09:55] <babel42> I need it on th sever, btw.
[09:55] <babel42> *server
[09:56] <babel42> So that a user doesn't upoald crap on it
[09:56] <Pidgey> same thing applies, iirc, clamtk has a cli command
[09:56] <rootpt> is there any command to see only the interface?
[09:56] <Pidgey> m1st: what exactly do you mean with tunneling?
[09:57] <Pidgey> rootpt: without the extra crap, you mean?
[09:57] <rootpt> yep
[09:57] <rootpt> like echo $interface
[09:57] <Pidgey> as in, just "wlan0, wlan1, eth0"?
[09:57] <babel42> *upI was looking into, clamav
[09:57] <rootpt> just that
[09:57] <Pidgey> hmmm, there should be
[09:57] <babel42> that seemed promising too
[09:57] <Pidgey> just a sec, i'm gonna try something
[09:57] <babel42> used thar?
[09:57] <Pidgey> babel42: i use it, it's pretty good
[09:57] <rootpt> ok, thanks Pidgey
[09:57] <Pidgey> rootpt: is it for a script?
[09:58] <rootpt> yep
[09:58] <Pidgey> okay so even if it's a monster command, it doesn't matter too much then :p
[09:58] <Pidgey> sec
[09:58] <rootpt> k
[09:59] <m1st> i have 2 interfaces, external ip and internal ip, i want to route traffic between the two
[09:59] <Pidgey> m1st: just a sec, gonna take a look at rootpt's thing first, i'll get back to you in a sec :)
[10:00] <rootpt> Thanks Pidgey
[10:00] <m1st> this is like torrent
[10:00] <m1st> 1627 leechers 1 seeder
[10:00] <Pidgey> haha
[10:00] <Pidgey> well, i'm actually also trying to leech, but there are 0 seeders for me :p
[10:00] <BartlomiejB> ;)
[10:00] <Pidgey> i know how frustrating it is, so i'm donig what i can :)
[10:01] <m1st> what do u need?
[10:02] <Pidgey> sec, i'll explain it in a bit, i almost got rootpt 's answer :p
[10:02] <m1st> almost got rooted
[10:02] <Pidgey> :p
[10:03] <Pidgey> say, what's the command again to get a specific column?
[10:03] <m1st> awk ?
[10:03] <m1st> awk {'print $3'}
[10:03] <Pidgey> hmm, thought so, but i didn't got it working... sec
[10:03] <Pidgey> ah, got it
[10:04] <Pidgey> misplaced the '
[10:04] <Pidgey> thanks
[10:04] <m1st> it can also work like this:
[10:05] <m1st> awk '{print $3}'
[10:05] <Pidgey> yeah that didn't for me, for some reason
[10:05] <BluesKaj> 'Morning folks
[10:05] <Pidgey> 'morning
[10:05] <Pidgey> rootpt: so far, i have ifconfig -s | awk {'print $1'}
[10:05] <Pidgey> you just got to pop off the first line
[10:05] <rootpt> hmm
[10:05] <rootpt> let me see
[10:05] <Pidgey> i think it's with head, but didn't find the right params yet
[10:05] <m1st> echo 1  2 3 | awk '{print $3}' | awk {'print $1'}
[10:05] <m1st> works for me
[10:06] <m1st> but i'm using RH
[10:06] <Pidgey> yeah idk :p
[10:06] <Pidgey> okay so, next was? :p
[10:06] <Pidgey> you, m1st?
[10:06] <m1st> nah i'm okay
[10:06] <Pidgey> you found the answer?
[10:07] <m1st> yeah
[10:07] <m1st> iptables
[10:07] <Pidgey> haa
[10:07] <m1st> was looking for the specific command
[10:07] <Pidgey> "if at first you fail... check iptables " :p
[10:07] <m1st> iptables -t nat -A PREROUTING -p tcp -d external.ip.of.remote --dport 80 -j DNAT --to tunnel.addr.at.home:80
[10:07] <Pidgey> mhm
[10:07] <m1st> i actually want it on
[10:07] <Pidgey> i'll link you my problem in a bit, almost ready making a forum post :p
[10:08] <Pidgey> rootpt: thanks for that excersise though, i needed some practice with basic linux commands :p
[10:08] <Pidgey> i don't use them often enough
[10:09] <rootpt> Pidgey, heheh thanks ;-)
[10:10] <Pidgey> yw :)
[10:10] <m1st> pidgey, it's not legal to smoke weed in amsterdam right?
[10:10] <m1st> in a related issue
[10:10] <m1st> :)
[10:11] <Pidgey> i think it is, just not on the street
[10:11] <m1st> they just don't enforce it for locals
[10:11] <m1st> you're from NL right?
[10:11] <Pidgey> i think it's legal in coffeeshops and at home
[10:11] <Pidgey> nope
[10:11] <Pidgey> but i have friend all over the world :p i know a bit of this and that :p
[10:12] <houserockr> are there neat channels for such discussions on freenode?
[10:12] <m1st> so what's your bash problem? Pidgey
[10:13] <Pidgey> sec, just gotta hit the commit button :p
[10:13] <rollo> This is the first time I've used ubuntu in a while and I really hate unity. It does so many unnecessary things that do nothing to make life harder. It's a shame because it's so close personally to working.
[10:13] <Pidgey> oh and some tags
[10:13] <Pidgey> rollo: i use mate
[10:13] <Pidgey> i actually made a script to completely remove unity and get mate :D
[10:14] <acleansheet> Pidgey: Why do you prefer mate?
[10:14] <Pidgey> i actually prefer gnome classic, but mate looks a lot like gnome classic, and they maintain it, at least
[10:14] <rollo> I want to use unity for a bit and I'll stick with it if I can get the global menu to stop hiding 'File' 'Edt', etc unless I mouse over.
[10:14] <rollo> I don't need to know what my program is in full screen!!!
[10:15] <acleansheet> Rollo: good point.
[10:15] <acleansheet> I'm going to check out mate right now :)
[10:16] <Pidgey> do it, i think it's pretty great :D
[10:16] <Ben64> i'd suggest against mate, but use what you like, i guess
[10:16] <Pidgey> Ben64: how come?
[10:16] <Pidgey> m1st: here is my issue: http://askubuntu.com/questions/532454/hostapd-not-working-with-my-d-link-dwa-131-rtl8192cu-chip-driver-works-hosta
[10:16] <Ben64> its old and lame
[10:16] <rollo> Could any one point me in some direction to stop hiding these menus.
[10:16] <Pidgey> well, "lame" is a personal opinion, and "old"?
[10:16] <Pidgey> it has updates every day :p
[10:16] <Ben64> old - based off of gnome2, which is dead and should stay dead
[10:17] <Pidgey> rollo: 'fraid not, i dont ue unity
[10:17] <Ben64> doesn't play well with certain things because of that
[10:17] <rollo> Anyone know where I could branch this myself.
[10:17] <Pidgey> Ben64: well then your "suggestion against" is purely based on personal prefs :p
[10:17] <Ben64> not really, read again
[10:17] <m1st> drivers issue, yey
[10:17] <Pidgey> yeah sorry, hit enter before i read :p
[10:17] <Pidgey> m1st: ikr
[10:17] <Pidgey> Ben64: but so far, i've had no problems with it
[10:18] <Ben64> anyway, if you like the gnome2 look, there is the gnome fallback mode
[10:18] <Pidgey> yeah, true
[10:18] <rollo> A much better format for unity's global menu would be XChat - File Edit Server
[10:18] <Pidgey> i suppose i'll stick to mate until i run into any issues, and if i do, i'll keep what you said in mind :)
[10:19] <rollo> I don't know GTK and I don't see why that would be that hard to do.
[10:19] <Ben64> i don't even know why it got added to the repositories
[10:19] <rollo> Well QT.
[10:22] <Pidgey> i' gonna vacuum my room, if anyone has questions, i'll try to solve them when i get back :)
[10:22] <m1st> Pidgey: have you read this: http://bernaerts.dyndns.org/linux/74-ubuntu/277-ubuntu-precise-dwa-131-rev-b1
[10:22] <Pidgey> yes, i used that one to install my drivers first
[10:23] <Pidgey> but that was fairly unstable for me, though :/
[10:23] <Guest67757> hello I installed docky under unity 14.04 and I would like to use only docky.. to do so I need to pin the search option to docky how do I achieve this?
[10:23] <Pidgey> kept dropping my connection after a minute or two
[10:23] <rollo> Also how can I make Unity smaller, everything is at least 33% compared to XFCE
[10:24] <rollo> 33% larger.
[10:24] <Pidgey> anyway, brb, if you need me, pm me :)
[10:25] <poizen> is this a chat channel ?
[10:25] <m1st> nope
[10:25] <JHP__> yes
[10:25] <poizen> which one of you is trusty?
[10:26] <rootpt> Pidgey, Theres no way in that command u gave me to only shows the interface im using?
[10:26] <rootpt> like grep or something?
[10:26] <JHP__> depends on u <poizen>
[10:26] <m1st> what command? ifconfig?
[10:27] <Pidgey> rootpt: technically, you're using all your interfaces that are up
[10:27] <poizen> I wanted help, I installed cinnamon for 14.04 and I want to make it look better, something like rainmeter for ubuntu?
[10:27] <rootpt> ifconfig -s | awk {'print $1'}
[10:27] <rootpt> eish, thats true Pidgey
[10:27] <rootpt> well thinking
[10:27] <rootpt> :X
[10:27] <rootpt> i will do diferent, thanks btw
[10:27] <Pidgey> ;)
[10:28] <Pidgey> np
[10:28] <sennn> 1FV9sivy3kLD3GViDdxLmabKnaee23fNko
[10:28] <mi4>  I learned to get backtrack. Kali. Ubuntu. Fedora and a few other Linux running without any manual on a laptop using VMware but I can't seem to get it to work on the 4 diff cell phones in have
[10:30] <m1st> rootpt: ifconfig -s | sed 1d
[10:30] <m1st> rootpt: ifconfig -s | sed 1d|awk {'print $1'}
[10:31] <rollo> Are there any conflicts between Unity and GNOME 3?
[10:31] <rootpt> yes, but it gives me all 3 interfaces
[10:31] <rollo> As in can I install one aside the other?
[10:31] <mi4> how abt installin Linux on itouch iPod
[10:32] <ikonia> rollo: they share packages, but they will also conflict in terms of both wanting to be desktop
[10:32] <ikonia> mi4: what about it ? ubuntu doens't work on apple devices
[10:35] <sennn> good bye linux hello mac
[10:35] <ikonia> sennn: not something that has any relevence to this channel
[10:37] <sennn> goodbye linux hello mac!!!
[10:37] <cfhowlett> sennn, yes we get it.  good luck.  bye bye
[10:38] <Pidgey> sennn: this is a linux chan, keep your mac out of this
[10:38] <BluesKaj> keep it up and it;ll be goodbye sennn :)
[10:38] <Pidgey> thanks, ikonia :p
[10:39] <BluesKaj> bummer my typing skills can't keep up with action in here .
[10:40] <Pidgey> ha, and this chan is fairly "quiet" :p
[10:41] <Pidgey> but yeah, my typing speeds (and even more, my reading speed) is not what it used to be, 2 years ago
[10:41] <oOvo> Hi
[10:41] <Pidgey> you need those, if 200 people are active, 24/7 :p
[10:41] <oOvo> what is the latest version of mint?
[10:41] <Pidgey> hi, oOvo
[10:41] <Pidgey> no clue, look at their website
[10:41] <JHP__> hi oove
[10:41] <oOvo> hi
[10:41] <oOvo> o ovo is egg in portuguese
[10:41] <oOvo> "the egg"
[10:42] <oOvo> just fyi
[10:42] <JHP__> why r u here?
[10:46] <Pidgey> i'm going to take a nap
[10:46] <Pidgey> i'll bbl
[10:46] <Pidgey> nap, not fap
[10:46] <Pidgey> fap is for after the nap
[10:46] <oOvo> ;[
[10:47] <cfhowlett> Pidgey, obviously wildly inappropriate for this family friendly channel.  knock it off.
[10:47] <oOvo> ^
[10:47] <m1st> rootpt: ?
[10:47] <rootpt> sorry m1st ?
[10:47] <Pidgey> lol sorry, cfhowlett, just played along :p
[10:47] <m1st> it suppose to print the interfaces
[10:47] <Pidgey> i'll (try to) behave
[10:47] <m1st> which one do you want?
[10:48] <rootpt> yep but just the one im using to the internet connection
[10:48] <rootpt> but its fine, i did it by other way
[10:49] <m1st> you can use tail -1 (will get the last one)
[10:51] <rootpt> hmm
[10:51] <rootpt> ok
[10:51] <rootpt> the last one is always the wlan* isn't is?
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[10:59] <unopaste> gta5modz you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[11:00] <oOvo> ty
[11:00] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:00] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:00] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:00] <cfhowlett> !ops | gta5modz spamming
[11:01] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:01] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:01] <gta5modz> !ops | cfwhowlett
[11:01] <gta5modz> !ops | cfwhowlett spam
[11:01] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:01] <gta5modz> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:01] <Quatroking> but gta 5 doesn't even run on ubuntu
[11:02] <Quatroking> they don't even plan a release
[11:03] <cfhowlett> Quatroking, do not feed trolls, please.
[11:03] <Ben64> if anyone is curious, don't download that, chock full of virus
[11:03] <cfhowlett> Ben64, NO!  Say it ain't so!
[11:03] <Ben64> 49/54 on virustotal
[11:03] <Ben64> just saying.
[11:04] <Quatroking> on the topic of gta by the way, which ones are playable on ubuntu?
[11:04] <zoie> i have no sound and i'm getting i'm getting ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Playback open error: -2,No such file or directory when trying to start speaker-test
[11:04] <zoie> (on kde)
[11:04] <Ben64> !appdb | Quatroking
[11:05] <Quatroking> thanks, Ben64, totally forgot about that site
[11:09] <Quatroking> dolphin, ppsspp, pcsx2 all have linux releases right?
[11:10] <usbzpls> Well guys i did say i was comin gback
[11:10] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:10] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:10] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:10] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:10] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:10] <unopaste> usbzpls you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[11:11] <Ben64> bazhang: still here?
[11:12] <usbzpls> i did say i was coming back lol
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <Ben64> !ops
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <Quatroking> I don't understand why you'd spam a virus on a linux-based channel
[11:12] <usbzpls> !ops Ben64 | spam
[11:12] <usbzpls> !its not virus
[11:12] <usbzpls> its a rat lol
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:12] <unopaste> usbzpls you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[11:13] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:13] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:13] <usbzpls> lol
[11:13] <usbzpls> suck my dick
[11:13] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:14] <usbzpls> New GTA V RTM TOOL PS3 (CFW AND OFW) STATS+MONEY+RP https://www.mediafire.com/?9ct66wz4cf3d31g
[11:14] <cfhowlett> !ops | usbzpls, please ban
[11:17] <ApplesInArrays> Dual booting with W7. Ubuntu Partition should be FAT32?
[11:17] <cfhowlett> ApplesInArrays, yes
[11:17] <Ben64> no!
[11:17] <cfhowlett> ApplesInArrays, ntfs
[11:17] <Ben64> still no! should be ext4
[11:18] <Svetlana> i would use ext4 (unless i'd like to read it from windows, which is not the case for me) :o
[11:18] <cfhowlett> ApplesInArrays, doh!  Svetlana and Ben64 are right.  I was thinking of the USB.  sorry.
[11:18] <ApplesInArrays> ext4 isn't an option
[11:18] <Ben64> uh... yes it is
[11:18] <ApplesInArrays> Not in the software I"m using.
[11:18] <Ben64> what software would that be
[11:19] <Quatroking> I got my win8.1/ubuntu dualboot using ntfs for win and ext4 for ubuntu
[11:19] <Svetlana> <3
[11:19] <ApplesInArrays> The one where EXT2 and EXT3 are options, but not EXT4.
[11:19] <Svetlana> what are you using? :)
[11:20] <ApplesInArrays> Going with NTFS
[11:21] <Quatroking> what
[11:21] <Ben64> well that was pointless
[11:22] <Quatroking> I don't suppose you guys know of any good software on windows that allows me to read/write to ext4
[11:22] <Svetlana> i suppose ubuntu would, err, work on ntfs (i'm not sure what the implications would be though -- iirc it's a fs that requires defragmenting from time to time, and is sensitive to random power outages)
[11:22] <Quatroking> I used to have a driver that allowed this but that was 7 years ago
[11:22] <Ben64> Quatroking: google does, i forget the name, i have it on my laptop though
[11:34] <boriseto> If I have both 12.04 and 14.04 installed, should I be careful when updating Grub (like from which system or something)?
[11:35] <EriC^^> boriseto: i think that would affect the default entry
[11:35] <EriC^^> ( if you also grub-install )
[11:35] <EriC^^> otherwise if you update-grub on the other system, it wouldnt have any effect ( i think )
[11:36] <boriseto> EriC^^, hmm, so if it's only update-grub, it links to the newer kernel images, and with grub-install it links to all available kernel images? (please correct me if I'm wrong)
[11:38] <EriC^^> boriseto: no grub-install would install it to the mbr, update-grub would only modify the /boot/grub/grub.cfg file
[11:38] <lucifugo> hi to all
[11:38] <boriseto> EriC^^, oh I understand now. Thank you very much.
[11:38] <EriC^^> no problem :)
[11:40] <Guest45563> .
[11:41] <lucifugo>   
[11:41] <Durick> hello
[11:41] <Durick> I've a problem
[11:41] <nikhil_ubuntuguy> hello
[11:41] <Durick> I've boutgh a chromebook
[11:42] <Durick> bought*
[11:42] <theringmaster> morning
[11:42] <Durick> delete entirely chromeos, put seabios by default, and I've a problem, my pc take 1m30s to startup (and just 8sec when I have chromos witch is a chromeos fork)
[11:43] <Durick> My pc is a toshiba chromebook (with a ssd hard drive)
[11:43] <Durick> my bootchart
[11:43] <Durick> https://lut.im/1FYEi2LQ/Vqv4jZON
[11:43] <Durick> anynone can help me?
[11:44] <theringmaster> sorry Durick, I am a noob with my own questions
[11:44] <cfhowlett> Durick, never done it myself, but chrubuntu is supposed to be the solution.
[11:45] <Durick> cfhowlett: with chrubuntu I should keep chromeos?
[11:45] <Durick> or unlike croton I can entierely delete
[11:45] <cfhowlett> Durick, "never used it" ...
[11:45] <Durick> (I've already entirelely delete)
[11:46] <cfhowlett> Durick, http://chromeos-cr48.blogspot.com/
[11:46] <Durick> I've also change my bios
[11:46] <Durick> the chrome default bios to a custom seabios
[11:47] <Durick> (so I can't reinstall chromeos, and I don't want)
[11:47] <cfhowlett> Durick, you should ask the chrome ubuntu channels .. this isn't the place for your answers
[11:47] <Durick> It's a ubuntu problem I think
[11:47] <Durick> even a kernel problem
[11:47] <theringmaster> is anyone proficient with multi-booting into multiple flavors of linux and ubuntu?
[11:48] <cfhowlett> Durick, "think" ... anyway, notice how no one here is booting ubuntu on chrome?  go to the chrome ubuntu channels for informed advice.
[11:48] <Durick> ok
[11:49] <Durick> hum.. what is the channel ? :D
[11:49] <Durick> they don't know on  #chromium-os
[11:49] <Durick> (because I've deleted chromeos)
[11:49] <Durick> and on #chromium-os-users
[11:49] <Durick> on #kernel they think that here is the better place LD
[11:49] <Durick> :D*
[11:50] <cfhowlett> http://chromeos-cr48.blogspot.com/
[11:51] <nikhil_ubuntuguy> hmmmm
[11:51] <nikhil_ubuntuguy> hello
[11:51] <theringmaster> hi
[11:51] <nikhil_ubuntuguy> i was using ubuntu side by my win7
[11:51] <cfhowlett> chrubuntu.blogspot.com
[11:51] <nikhil_ubuntuguy> nd 2day before my win7 crashed
[11:52] <nikhil_ubuntuguy> and i have to reinstall the whole windows
[11:52] <nikhil_ubuntuguy> from booting cd
[11:52] <nikhil_ubuntuguy> now the ubuntu is not boot
[11:52] <_Trullo> no talloc srackframe ar ../source3/param/loadparam.c:4864, leaking memory
[11:52] <_Trullo> how do I fix this?
[11:52] <nikhil_ubuntuguy> can i solve this promblem
[11:53] <nikhil_ubuntuguy> or i have to installl ubuntu again
[11:53] <nikhil_ubuntuguy> with dual boot
[11:53] <nikhil_ubuntuguy> can anybody plzz helpp
[11:53] <nikhil_ubuntuguy> me
[11:53] <nikhil_ubuntuguy> :)
[11:54] <theringmaster> I would only know to reinstall ubuntu cause windows sucks with dual boot after os already installed
[11:54] <cfhowlett> nikhil_ubuntuguy, you reinstalled windows? and windows works but ubuntu doesn't?  right?
[11:55] <nikhil_ubuntuguy> right
[11:55] <cfhowlett> nikhil_ubuntuguy, relax.  easy.
[11:55] <nikhil_ubuntuguy> its not booting the boot manager
[11:55] <cfhowlett> !grub2 | nikhil_ubuntuguy
[11:55] <nikhil_ubuntuguy> thanks
[11:55] <cfhowlett> nikhil_ubuntuguy, happy2help
[11:56] <nikhil_ubuntuguy> well m glad for that ;)
[12:01] <theringmaster> my problem/help may be simple, had to uninstall ubuntu 13 and 14 because of very laggy system, may be older onboard vid card causing problems, so I have been playing around with different ubuntu and linux distros. I wanted to try knoppix, fedora, lubuntu, and xubuntu in a multi-boot set-up. The problem is each one deletes the one previously but xubuntu said I had ubuntu 13 installed (only lubuntu, had wiped hdd prior to inst
[12:01] <theringmaster> allation and machine boots straight to xubuntu, how do I fix it and can I have all 4 bootable?
[12:02] <Monotoko> Right... I have a TV that I'm trying to get to a decent resolution... it installs with 1366x728, but can scale up to 1920x1080
[12:02] <Monotoko> that last one makes everything way too small on the tiny screen >.> the first one makes everything too big
[12:02] <Monotoko> is there a middle ground? I've tried the various ones in the display options and they all scale like crap
[12:03] <dracnoc> Monotoko: are you using a graphics card on your hardware? I found that altering the overscan on an nVidia card settings allowed me to tweak the output until it fitted correctly?
[12:04] <rebs> hey so grub is showing a boot option on a partition of my harddrive which no longer exists. how can i remedy this?
[12:04] <Monotoko> dracnoc, aye I am... il try to tweak that a bit
[12:05] <Monotoko> dracnoc, oops... thought I'd installed the drivers already
[12:05] <Monotoko> that could explain it
[12:05]  * dracnoc facepalms
[12:07] <dracnoc> rebs: does "sudo update-grub" do anything for you?
[12:07] <rebs> yeah it updated ssome config files
[12:08] <rebs> a few lines like thids : Found linux image: /boot/vmlinuz-3.13.0-36-generic
[12:08] <rebs> but the old bversion was 12, and i boot 14 now
[12:09] <rebs> so im not sure if thats related
[12:09] <ubunoo> Hi.how can I update my 12.04 to 14.04?
[12:09] <dracnoc> rebs: that looks about right. try rebooting the machine with the grub problem and see if your "extra" partition is now listed
[12:09] <ikonia> !upgrade | ubunoo
[12:09] <rebs> thanks for the tip dracnoc !
[12:09] <rebs> ill give it a go in a bit
[12:09] <dracnoc> rebs: no problem :)
[12:10] <ubunoo> ubottu:So I can't do it yet?
[12:10] <ikonia> ubottu: where does it say that ?
[12:10] <ubunoo> So I can't upgrade yet?
[12:10] <ikonia> ubunoo: where does it say you cant upgrade
[12:11] <cfhowlett> ubunoo, upgrade to what?
[12:11] <ubunoo> ikonia:I cant find any 12.04 to 14.04 here.
[12:11] <cfhowlett> ubunoo, 12.04 >> 14.04 is direct and supported.  sudo do-release-upgrade           IF you have your software source settings to Long Term Support only
[12:11] <ubunoo> cfhowlett:12.04 to 14.04
[12:11] <ikonia> ubunoo: did you read the instructions ubunoo sent you
[12:13] <geirha> ikonia: tab-fail :p
[12:13] <ikonia> yup
[12:13] <ikonia> that doc needs updating though
[12:13] <ikonia> he was right
[12:13] <cfhowlett> ikonia, inception or time travel?
[12:13] <rootpt> Pidgey,
[12:16] <Jonii> Hi. I just installed something that told me to use systemctl to enable some daemon thing
[12:16] <dracnoc> Jonii: what did you install?
[12:16] <Jonii> Which seems to rely on having systemd, which isn't part of default Ubuntu installation. So, what's the default way of doing this sort of daemon startup thing?
[12:17] <Jonii> dracnoc: something that might help me get my very valuable gaming mouse function better, razer driver thingie
[12:18] <Jonii> I have no idea how it's gonna help, I'm just randomly doing things before I toss that mouse out of the window :/
[12:18] <ubunoo> cfhowlett:What does the  sudo do-release-upgrade -d do? sudo do-release-upgrade -d or  sudo do-release-upgrade ?what to use?
[12:19] <cfhowlett> ubunoo, do-release-upgrade -p       should be the one.  -d would be the development version i.e. 14.10 =beta
[12:19] <cfhowlett> sudo do-release-upgrade -p          and read the feedback
[12:19] <dracnoc> Jonii: i'm not sure how systemd relates to your gaming mouse, unless it's being used to run your mouse drivers at boot so you can use the hardware
[12:20] <usixjad> hey guys, i was messing around with scala and now when i try to watch something on putlocker, i get "java not found, please install java". java -version shows 1.7 openjre. not sure what's wrong
[12:20] <ubunoo> cfhowlett:So just do-release-upgrade  is good right?
[12:20] <cfhowlett> ubunoo, nope.  sudo do-release-upgrade -p
[12:20] <ivanjianjian> !help
[12:21] <ubunoo> cfhowlett:is it to the last LTS?
[12:21] <Jonii> dracnoc: that seems like what that command is supposed to do
[12:21] <ivanjianjian> !help
[12:21] <cfhowlett> ubunoo, ONLY if you have your sources set for LTS only
[12:21] <ivanjianjian> !patience
[12:22] <ubunoo> cfhowlett:Thanks man.
[12:22] <cfhowlett> ubunoo, sudo do-release-upgrade -s         will sandbox (test) the result.  look for 14.04 to be the next version.  if it works remove the -s and upgrade away.
[12:23] <usixjad> anyone know what could be wrong with my java? :(
[12:24] <WizardGed> usixjad: what's wrong with your java?
[12:24] <dracnoc> Jonii: i've only found help sections relating to the mouse sensitivity, and they're not pretty. Looks like there's no native drivers - http://curiousnerd.me/razer-mouse-sensitivity-ubuntu/
[12:25] <WizardGed> usixjad: ahh i see do you have all of icedtea7 installed
[12:27] <usixjad> wizardged: i'm certain that java is installed (shell "java -version" shows that i have openjdk 1.7 + VM installed), but loading a video on putlocker/sharesix/etc says java not found, install java now, etc. it was working fine about 5 hours ago. i was experimenting with Scala and a few new IDEs, so maybe i selected a different and therefore incompatible version of java for default use. not sure.
[12:27] <usixjad> wizardged: i have icedtea 2.5.2
[12:28] <WizardGed> what is your java_home variable (type "echo $JAVA_HOME" [without the quotes])
[12:29] <usixjad> apparently none
[12:29] <usixjad> do i change its path in bashrc?
[12:29] <WizardGed> usixjad: that's what i would try
[12:30] <WizardGed> i had to do the same because im using openjdk8 in 14.04
[12:30] <vitorpacheco> can someone help me? in sublime text, when I try to put some accent he gets before the word.
[12:30] <usixjad> what kind of line would i try?
[12:31] <WizardGed> one second i'll hunt down mine just give me a second i have to ssh home first
[12:34] <WizardGed> put something to the point of "export JAVA_HOME=/usr/java/jdk1.8.0_b55/bin/java" replacing my path to your openjdk's path
[12:35] <WizardGed> usixjad: that should set your path
[12:39] <theringmaster> is there a way to install fedora, knoppix, lubuntu, xubuntu on same computer and hae them all in a boot menu?
[12:39] <theringmaster> have
[12:39] <vitorpacheco> can someone help me? in sublime text, when I try to put some accent he gets before the letter.
[12:40] <usixjad> wizardged: /usr/lib/jvm/java-7-openjdk-amd64?
[12:41] <WizardGed> usixjad:  looks right to me however i don't have 7 installed so i cant say with certainty unfortunately.
[12:42] <usixjad> yeah that's about all i could find
[12:42] <usixjad> i'll try it
[12:43] <usixjad> echo $JAVA_HOME is still empty though
[12:44] <WizardGed> yeah run that command in terminal for the current session
[12:45] <frainfreeze> Guys I have realy realy messy problem
[12:45] <frainfreeze> THis is going to be hard to fix
[12:45] <WizardGed> frainfreeze: have you tried a mop first
[12:47] <WizardGed> frainfreeze: joking aside what's wrong
[12:49] <frainfreeze> I had small memory card in mbile phone then mad back up on pc under name "sd card backup v2." transfered that to usb and onto unutnu 11 mashine since then i can move that folder but can not open it or delete it, it works on any operating system, i even retrived files by ziping folder and then extractin but i can not delete it, not on mac not on ubuntu not on windows, and now I have even bigger problem, i downloaded some programs on ubuntu
[12:49] <frainfreeze>  mashine puted them onto usb and pluged it into win7 mashine, boom I can not access usb it says access denied and it doesn't even show space on usb, i tried changine premisions, and win reports error on that "sd card backup v2." folder, however usb still works on ubuntu
[12:49] <rebs> ok so i want to skip the grub memtest options and have ubuntu load directly. should i just change GRUB_TIMEOUT to 0?
[12:49] <frainfreeze> rebs you could do it that way, yes
[12:50] <dracnoc> rebs: yes, that'll do it
[12:50] <rebs> is that the 'ghetto' way
[12:50] <frainfreeze> I sometimes get flash but it is minor
[12:50] <frainfreeze> Any idea about this usb shiz?
[12:50] <rebs> lets see if it works :) bbrb
[12:51] <frainfreeze> And yeah I deleted that file and now it is in .Trash
[12:52] <frainfreeze> Of course I can not delete that folder, and of course i tried, what a moron I am
[12:53] <WizardGed> frainfreeze: i would first update that poor ubuntu machine to a supported version and then check the zip and filesystem to make sure they are windows and ubuntu compatible (try fat32)
[12:53] <frainfreeze> I did , now I am on 14.04, this is braging more than year now
[12:53] <frainfreeze> Mess hapened when I tried to remove .Trash
[12:54] <usixjad> wizardged: it doesn't seem to work :/
[12:54] <usixjad> i'm getting annoyed
[12:55] <WizardGed> usixjad: hmm have you tried invoking /usr/bin/java [insert command here]
[12:55] <frainfreeze> well I guess i will reformat the usband loose precious files :(
[12:55] <usixjad> i don't quite understand $PATH: should it be written like this? (PATH=$PATH:/usr/java/jdk1.5.0_07/bin) one guide says yes
[12:55] <WizardGed> frainfreeze: make a copy with clonezilla first
[12:55] <rebs> woot finally got the clean boot! thanks for all the help guys
[12:56] <dracnoc> rebs: \o/ yay ...
[12:56] <frainfreeze> Also glitch I notice on ubuntu 14, when you cut file on disk and paste it ono usb
[12:56] <frainfreeze> it
[12:56] <frainfreeze> disapears
[12:57] <frainfreeze> WizardGed, thanks for help :-)
[12:58] <Pidgey> did i miss something?
[12:58] <Pidgey> i noticed someone highlighted me while i was gone
[12:58] <Pidgey> but i couldn't see who
[12:58] <WizardGed> usixjad: you could do it that way in bash but i'm not sure that would help. the problem i see is that it's probobly looking for java in some hard coded location it isn't in instead of using JAVA_HOME like any sane program
[12:58] <WizardGed> frainfreeze: no problem sorry i couldn't be more help
[12:59] <WizardGed> usixjad: what program is complaining again?
[13:01] <usixjad> wizardged: http://www.sharesix.net/d54d687b338a
[13:02] <daniel> #linaro-tcwg
[13:03] <frainfreeze> thanks :)
[13:05] <WizardGed> usixjad: sigh, why in 2014 is there some jerk still putting Java in a browser... It was a mistake made once that continues to come back to bite any java dev again and again
[13:05] <usixjad> ._.
[13:05] <usixjad> i have no idea why this happened
[13:05] <usixjad> this is what i get for messing with scala for a few hours apparently
[13:05] <WizardGed> usixjad: i know it's not your fault
[13:06] <usixjad> this begs the question
[13:06] <usixjad> how do i remove all traces of java and start over?
[13:07] <usixjad> :p
[13:07] <WizardGed> usixjad: it's some masochist of a Java developers fault. but moving on  you could sudo apt-get purge openjdk7-jre
[13:07] <usixjad> oh yeah, purge
[13:11] <usixjad> wizardged: what version of java do you recommend? oracle?
[13:13] <WizardGed> usixjad: honestly whatever works for you but i typically stick to openjdk because it's the official Java reference jvm. however I program in java so that may not be important to you
[13:14] <sasin108> 안녕하세요
[13:14] <sasin108> 처음 설치하고 접속해 봅니다...
[13:14] <sasin108> 신기하네요...
[13:16] <vitorpacheco> can someone help me? in sublime text, when I try to put some accent before he gets the letter.
[13:19] <Pidgey> sasin108: is that korean?
[13:20] <morsnowski> it's korean allright
[13:20] <Pidgey> well if he'd also understand english, i would like to ask him something :p i need help with a "korean project" :p
[13:21] <Pidgey> i got this e-reader from a korean friend, when he went home after erasmus
[13:21] <Pidgey> after a long time, i managed to get it in english, but it's liked to a site, and i have no clue how to make an acc there
[13:22] <Pidgey> cuz, either it can't be displayed in english, or the "show in english" button is korean, and i can't find it....
[13:22] <morsnowski> I'd point him to the korean channel but don't remember how to
[13:22] <Pidgey> with "point", you mean autojoin?
[13:23] <sasin108> this chat not in korean?
[13:23] <morsnowski> there are ubuntu channels in all langauges
[13:23] <morsnowski> sasin108: nope
[13:23] <Pidgey> sasin108: would you like to help me out for a second, please? :)
[13:25] <dracnoc> Pidgey, can't you use Chrome to see the korean site translated on a regular browser and then create an account from there?
[13:26] <Pidgey> well, tbph, i'd perfer to stay away from chrome :p
[13:26] <Pidgey> i know it has some nice features, but
[13:26] <Pidgey> it's a pain to get rid of tracking cookies
[13:26] <Pidgey> and it's made by google, and i'm very, very pro privacy
[13:26] <jiffe> don't suppose there's a way to run the latest safari (not windows version) in linux
[13:26] <dracnoc> firefox has a few translation tools too ... just sayin'
[13:26] <Pidgey> oh? any you can recommend?
[13:28] <morsnowski> Pidgey: why don't you use chrome or chromium in incognito mode
[13:28] <morsnowski> my chromium doesn't open any other way anymore
[13:28] <Pidgey> same thing applies, it's made by google, and not open source
[13:28] <Pidgey> it might be "private mode" for your pc, but not for google :p
[13:29] <morsnowski> chromium is not chrome
[13:29] <dracnoc> Pidgey: Fast Trabslation uses google translate
[13:29] <dracnoc> Translation*
[13:29] <Pidgey> hmmm
[13:29] <Pidgey> and it translates the whole page?
[13:30] <Pidgey> nvm, looked for it
[13:30] <Pidgey> could do the trick, i'll take a look, thanks
[13:30] <morsnowski> my short cut reads 'chromium-browser --incognito'
[13:30] <dracnoc> Pidgey: no, it doesn't - but Quick Translator should do that
[13:31] <Pidgey> okay
[13:31] <Pidgey> morsnowski: i just prefer to stay away from chrome and the likes :p
[13:31] <jarnos> How to report a bug, if I can not read files from an USB device connected in MTP mode?
[13:31] <Pidgey> like i said earlier, it's a pain to clear tracking cookies etc as well
[13:31] <morsnowski> and i don't think it leaks any info to google, at least I haven't seen feedback from google (links, suggestions)
[13:31] <morsnowski> Pidgey: again chromium is not chrome
[13:31] <Pidgey> yeah well, data mining is everywhere
[13:31] <Pidgey> yeah i know
[13:31] <Pidgey> that's why i said "and the likes" :p
[13:32] <Pidgey> imho, firefox is just the easiest to keep clean
[13:32] <Pidgey> might be a bit slower though, true
[13:32] <Pidgey> okay, i need to restart ff for this plugin, i'll just log in from hexchat
[13:33] <Pidgey> is freenode's ssl connection also on 6697?
[13:34] <freijon> Pidgey: yes, just tried it
[13:34] <Pidgey> aight, thanks
[13:34] <Pidgey> bbias then
[13:35] <pidgey> hmm, okay, i never read this before, but it sais this nick is regged :p
[13:35] <pidgey> curious if i regged it years ago...
[13:35] <pidgey> guess not
[13:35] <dracnoc> pidgey: you're no longer "Pidgey"
[13:35] <hoschiCZ> -
[13:35] <dracnoc> p/P
[13:36] <pidgey> irc is case insensitive
[13:36] <pidgey> i guess i just stole someone elses' nick :p
[13:36] <pidgey> let's see
[13:36]  * dracnoc shrugs
[13:36] <Fluffs> there we go
[13:38] <matty_r> So I somehow managed to stop my onboard wifi adapter from showing up in iwconfig, I only have wlan1, not wlan0. It's not in ifconfig either. It still shows up in lspci however.
[13:39] <Fluffs> do ifconfig -a
[13:39] <Fluffs> is it there?
[13:39] <matty_r> nope
[13:39] <Fluffs> what was the last thing you did, regarding the network card?
[13:40] <matty_r> i've checked /etc/rc.local for ifconfig wlan0 down and /etc/modprobe.d/blacklist.conf to see if it was blacklisting it.
[13:40] <Fluffs> before it went down, i mean
[13:41] <matty_r> Not 100% sure - The most I remember was just modifying the rc.local to automatically bring it down on boot.
[13:41] <matty_r> Pretty sure i've got the drivers still installed
[13:42] <Fluffs> well, i'm pretty new to linux myself, and i don't feel confident enough to mess with rc.local too much, just for services :p
[13:42] <Fluffs> so idk
[13:42] <Fluffs> maybe networkmanager service?
[13:44] <matty_r> Don't think so, lshw -C network shows it as * - network UNCLAIMED.
[13:45] <Fluffs> then i'm very sorry, but i have no idea
[13:45] <Fluffs> you might want to ask some smarter people :p
[13:46] <matty_r> no worries mate
[13:46] <dracnoc> wow, that was interesting. compiled the married-to-wife software some time ago. used the --massage-feet-random option during compile and it returns with burgers 'n' fries, and the burgers are fantastic ;-)
[13:47] <Fluffs> what? :p
[13:47] <Bnaya> I need couchbase for ubuntu 14.04. is there a way to avoid compliing it myself?
[13:47]  * dracnoc chuckles
[13:48] <Fluffs> Bnaya: with a group of students, we did some research about document oriented db's
[13:48] <dracnoc> matty_r, this might help your wireless problem - follow the modprobe advice: http://ubuntuforums.org/showthread.php?t=1314693
[13:48] <Fluffs> is mongodb an option? it seemed to be the best
[13:49] <Bnaya> i want to move from centos to ubuntu and need to have the same stack
[13:49] <Fluffs> ah, okay
[13:49] <Fluffs> well i have no experience with couchdb, sorry
[13:49] <Bnaya> maybe ill just use 12.04
[13:51] <Fluffs> Bnaya: any reason why you're so against compiling your own db?
[13:51] <Fluffs> or just don't feel like it?
[13:51] <Bnaya> I’m not devops guy so i want to KISS it
[13:52] <Fluffs> shouldn't be too hard tho
[13:52] <Bnaya> To make it work yes,
[13:52] <Bnaya> but to maintain it currectly ...
[13:52] <Fluffs> yeah, i get your point
[13:53] <Fluffs> that's why i prefer repo versions too :p
[13:53] <Fluffs> but don't they have a ppa?
[13:53] <padhu> Hi Ubuntians, please recommand good multifunction laser printer around 100 bucks for home usage
[13:53] <Bnaya> 14.04 is not yet offically supported by couchbase
[13:53] <Bnaya> they have a bug opend for it
[13:53] <Fluffs> ah
[13:54] <Fluffs> padhu: not the best to help with printers :p i barely print anything, personally
[13:54] <Bnaya> i just wondered is someone else released reasonably maintained package
[13:55] <sydney> Whats wrong? Is it an hp printer?
[13:56] <dracnoc> padhu: HP printers are the easiest to work with, but you'll be lucky to find a laser/multi for 100
[13:57] <dracnoc> padhu: amazon sell a few reconditioned laserjet 100/200 Pro for around that price.
[13:58] <morsnowski> I use an  officejet 6600 and it works great, I know it's not a laser but working justg great and has supposedly the lowest cost per page.
[13:58] <sydney> oh...
[13:58] <dracnoc> http://www.amazon.com/Hewlett-Packard-LaserJet-Wireless-Printer/dp/B008ABLJHE/ref=sr_1_2?ie=UTF8&qid=1412517483&sr=8-2&keywords=hp+laserjet+200
[14:03] <cyber_dweller> does anybody knows why ubuntu 12.04 strongswan package doesn't include /usr/lib/ipsec/plugins/libstrongswan-md4.so
[14:03] <cyber_dweller> does anybody knows why ubuntu strongswan package doesn't include /usr/lib/ipsec/plugins/libstrongswan-md4.so
[14:06] <marcello> ciao
[14:06] <krasnayarsk> Why can't fontforge open/edit psf files?
[14:14] <alsu> hi! I have run “sudo ufw deny from a.b.c.d” and “sudo ufw enable” but I still see that IP in iftop.
[14:14] <alsu> what else can I try?
[14:16] <sydney> every time i come back from standby nm-applet requires me to select my ethernet conection. How do i make it automatically connect?
[14:17] <dundel> exit
[14:18] <morsnowski> alsu is that an incoming connection?
[14:18] <alsu> morsnowski: yes
[14:18] <alsu> well, incoming traffic. not sure what sort.
[14:19] <vitorpacheco> can anyone help me? in sublime text, when I try to put some accented character, he gets before the letter.
[14:19] <morsnowski> well what app is listening
[14:20] <alsu> morsnowski: no app is listening. it appears to be UDP inbound for 443 (wtf)
[14:23] <alsu> yikes, now since enabling ufw I get “Operation not permitted - sendto” when I try to send a UDP packet to localhost :(
[14:24] <Nyoom> One question, why do you guys only help with small issues and never with big issues?
[14:25] <morsnowski> alsu: what is the output of ufw status
[14:25] <morsnowski> Nyoom: we leave that to you
[14:26] <alsu> morsnowski: extremely simple: https://gist.github.com/anonymous/5d2c2d8c73d33c182dd4
[14:26] <somsip> Nyoom: I don't see that you've posted an issue in here. But you will find that more complex issues are more likely to need a lot of time on behalf of the helper. It just might not be possible for some people to be able to or want to invest that time on someone who makes a negative statement like you have
[14:27] <alsu> the “Operation not permitted - sendto” error persists even if I disable ufw! it did not happen previously
[14:27] <Nyoom> Where would you send me to if I had a big issue?
[14:27] <somsip> Nyoom: just explain your problem and someone will help *if* they can
[14:28] <morsnowski> alsu: is a.b.c.d what you actually see?
[14:28] <alsu> morsnowski: no. it’s the IP
[14:29] <alsu> would you prefer 1.2.3.4? ;)
[14:29] <morsnowski> no that's ok but i don't take very little for granted
[14:30] <Nyoom> somsip, http://askubuntu.com/questions/532454/hostapd-not-working-with-my-d-link-dwa-131-rtl8192cu-chip-driver-works-hosta
[14:30] <morsnowski> and you are certain that the connection is still active
[14:31] <alsu> morsnowski: it’s not a conneciton. it’s inbound UDP traffic
[14:31] <somsip> Nyoom: I know nothing about wifi dongles so I cannot help. It's best if you address this to the channel in general, but if you've got it on askubuntu you will probably get a wider audience on there over the next day or so
[14:32] <Quatroking> what's the easiest way to share a folder over the network and be able to write things to it from a win8.1 machine?
[14:33] <superpumpmax> hello, i really need help. Currently, I'm running 14.04 desktop, and I might have broken it.  I'm thinking of installing 14.04 server over it.  however, I want to preserve all my apps mainly rtorrent, deluge, postfix, snapraid, mhddfs, samba and all their dependencies and settings.
[14:33] <superpumpmax> am i able to do that?
[14:33] <somsip> superpumpmax: do you want to use a desktop?
[14:34] <somsip> superpumpmax: (DE/WM)
[14:34] <morsnowski> alsu short of shooting down that ip there is little you can do. there is apparently no consumer for that data on your system
[14:34] <rypervenche> superpumpmax: http://askubuntu.com/questions/101931/restoring-all-data-and-dependencies-from-dpkg-set-selections
[14:34] <superpumpmax> no i don't need desktop, i installed earlier on for convinience, but ended up using it more as a server
[14:34] <alsu> morsnowski: I would love to shoot down that IP. how can I do that?
[14:35] <morsnowski> find the owner and ask where the offending system is located, then you take a trip over and pull the plug
[14:35] <somsip> superpumpmax: "more as a server". If you will need a DE, install desktop edition. If you will not use a DE, then server edition is fine. But why do you think you might have broken it?
[14:36] <morsnowski> or if that is indeed an illegal service attacking you you could ask the police
[14:36] <superpumpmax> somsip: i upgraded from 12.04 to 14.04 and i can't seem to get my Radeon HD 3200 to work
[14:36] <morsnowski> or the hoster, they usually have an abuse address
[14:36] <alsu> morsnowski: wait. what is ufw for then if not to block traffic
[14:36] <superpumpmax> i deleted fglrx and installed xorg default drivers
[14:37] <morsnowski> alsu there is no traffic, there is just clatter hitting your outside wall
[14:37] <superpumpmax> but still it would't recognize my card.  Xorg log shows video adapter not supported
[14:37] <superpumpmax> my system boots into terminal just fine
[14:37] <morsnowski> it's like somebody rining your door and running off
[14:37] <morsnowski> ringing
[14:38] <alsu> morsnowski: hm.
[14:38] <superpumpmax> rypervenche: just read the website.
[14:38] <alsu> morsnowski: ok. so, ever since enabling ufw, I started getting this sendto error
[14:39] <somsip> superpumpmax: I'd suggest that reinstalling to fix video driver problems is a bit much, though I have no experience with AMD cards so have no idea what to suggest. I do see probs reported by some on 14.04 with Radeon cards though so maybe someone else can help
[14:39] <alsu> morsnowski: syslog is full of “nf_conntrack: table full, dropping packet."
[14:39] <alsu> even if I disable ufw
[14:40] <gusti> fsdf
[14:40] <joehannes> !ubuntu developer channel
[14:41] <joehannes> !You hypocrate!
[14:41] <superpumpmax> somsip: yea..it was a bit too much. and i thought this is as a good a time as any to get server running. so, how can i install 14.04 while preserving all my apps and data
[14:41] <superpumpmax> ?
[14:41] <GRX13> Who can I message on the forums to change my username?
[14:41] <superpumpmax> does the apt-mark auto do that? to restore all settings and apps
[14:41] <superpumpmax> ?
[14:41] <somsip> !register | GRX13
[14:41] <joehannes> hey guys ... is there a dedicated developer channel for ubuntu?
[14:42] <somsip> joehannes: #ubuntu-dev from memory. see !alis
[14:42] <GRX13> So who on the ubuntu forums can I message to change my username (on the forums)?
[14:42] <somsip> GRX13: join #freenode, like the factoid said
[14:43] <somsip> GRX13: hang on...on forums or on IRC?
[14:43] <GRX13> forums
[14:43] <joehannes> !alis
[14:44] <GRX13> Can I message anyone from http://ubuntuforums.org/showgroups.php/
[14:45] <cfhowlett> GRX13, yes you can email them
[14:46] <somsip> joehannes: #ubuntu-devel https://wiki.ubuntu.com/IRC/ChannelList
[14:47] <joehannes> somsip ... thx, alis already helped me to ubuntu-app-devel .. seems more like what I wanted
[14:47] <joehannes> somsip ... thx for alis, didn't know about her
[14:47] <somsip> joehannes: np
[14:55] <Quatroking> how can i share a folder over the lan and have it accessed by a windows machine
[14:56] <daftykins> samba
[14:56] <daftykins> !samba
[14:57] <v9999_> So, I'm having a bit of an issue. I'm creating a Truecrypt 7.1 volume and right when the volume is finished encrypting, I get a popup which reads, "Administrator privileges required: Enter your user password or administrator password:". I've tried entering both my user and root password, but neither work. Is there some password I should be entering here that I'm forgetting?
[14:58] <daftykins> root doesn't have a password.
[14:58] <dracnoc> v9999_: have you tried using truecrypt with sudo?
[14:59] <Quatroking> daftykins, I guess this isn't as easy as windows' rightclick>share
[14:59] <Quatroking> ?
[15:00] <v9999_> dracnoc I'm pretty new, I'm not using it through the terminal or anything. How would I do that?
[15:01] <Basketball> when i use a rtcwake to sleep my computer why does the time get stuck at the time when it goes to sleep
[15:01] <daftykins> Quatroking: ubuntu has it as right click on folders, but from what i understand it just breaks for everyone
[15:01] <Quatroking> sounds like windows network sharing when using more than one windows version
[15:02] <daftykins> Quatroking: easier to just do it manually, install samba smbclient and smbfs
[15:03] <dracnoc> in a terminal: sudo truecrypt
[15:03] <daftykins> Quatroking: create a samba password for your ubuntu user, by running "sudo smbpasswd -a yourusernameonubuntu"
[15:03] <daftykins> Quatroking: then edit /etc/samba/smb.conf to create a share
[15:03] <daftykins> (or you could try right click sharing at this point)
[15:04] <Quatroking> alright
[15:04] <dracnoc> v9999_ : in a terminal: sudo truecrypt
[15:08] <dracnoc> v9999_: just out of interest, you do know that truecrypt is no longer under development? there have been some security concerns in the past, but you should still be able to use the software.
[15:09] <jarnos> I can not read files in MTP mode via USB from my Samsung Galaxy S5 Mini. However, I can list the files.
[15:09]  * cfhowlett thinks using unsupported software is unwise
[15:09] <daftykins> Quatroking: fwiw i only believe in password auth between systems (even Windows to Windows) - also Homegroups are incompatible in my experience. systems must leave a homegroup to work
[15:09] <Quatroking> I never really liked homegroup anyways
[15:09] <Quatroking> the concept is great but the execution is crap
[15:11]  * Quatroking frontpalms
[15:11] <Quatroking> just realized I can just use my NAS for a quick file transfer
[15:13] <daftykins> Quatroking: but where's the fun in that? :P
[15:13] <Quatroking> well, there's always the thrill of hoping the damn thing doesn't crash and reboot
[15:14] <Quatroking> I absolutely hate my seagate blackarmor 100
[15:14] <Quatroking> it's suicidal and has been claiming to be dead for 2 years now
[15:14] <stew_> #list
[15:14] <Quatroking> I'm not kidding it's seriously saying that its HDD is dead whenever I access the interface
[15:15] <compdoc> Quatroking, any way to check the SMART info from the drives inside?
[15:15] <dracnoc> v9999_: there's a rebuild of truecrypt called realcrypt, but it's only in an RPM build. alien should convert to a .deb file just fine and realcrypt behaves just like truecrypt and is currently maintained.
[15:16] <Quatroking> compdoc, I've done that a couple times by simply removing the drive and hooking it up to a ubuntu machine
[15:16] <Quatroking> comes out fine
[15:16] <Quatroking> the NAS' smart test also comes out fine
[15:16] <daftykins> sounds like a bad sectors job to me
[15:16] <Quatroking> wanna hear another funny? The unit is a 1-drive NAS. It uses RAID.
[15:16] <v9999_> dracnoc: Yes, I am aware of that. All security concerns are really just based on the warning on the website - it is still one of the most (if not the most) tried and tested encryption tools in existence. TC 7.1a passed a fairly extensive audit and I trust TC 7.1a more than I trust any new ones which have recently came out. Yes, I've heard of realcrypt. I feel more comfortable right now using something with a more extensive history.
[15:17] <v9999_> Also, thanks - I think your suggestion is going to work.
[15:17] <Quatroking> daftykins, yeah it has one or two dead sectors and the guys at seagate thought it'd be amazingly intelligent to have the unit reboot whenever it encounters a broken bit
[15:17] <Quatroking> because it's so hard to just skip over it, right?
[15:19] <daftykins> heh, ok
[15:19] <dracnoc> v9999_: ok, well - have fun with truecrypt ;)
[15:24] <dbugger> Hello guys. The route to access my router and configure it is "http://frit.box/", but when I put it on the browser I get a "Page not available error". This has to be config error from the OS, because when i try it from my Smartphone, I can reach it without problem. Where could the problem be?
[15:25] <Fishscene> dbugger: I assume DNS is the same on the smartphone and your computer?
[15:25] <lephisto> dbugger: proyserver configured?
[15:26] <Fishscene> Try pinging "frit.box" and see if it can successfully ping the correct IP address.
[15:26] <dbugger> Fishscene: Both are connected to the same router, if that is what you mean
[15:26] <dbugger> lephisto: I dont think there is any proxy configured
[15:26] <lephisto> don't think, check it!
[15:26] <lephisto> check dns as well and see if name resolution works in the shell
[15:27] <dbugger> lephisto: how can I check that?
[15:27] <lephisto> dbugger: browser settings
[15:27] <lephisto> depends on what you use
[15:27] <lephisto> but checking of dns resolution is fine, would be an easy thing to do b4
[15:31] <qwebirc8233> Hello people
[15:32] <Fishscene> Hi
[15:32] <qwebirc8233> How do I install bootchart2 from this site https://github.com/mmeeks/bootchart ?
[15:34] <dbugger> lephisto: I tried on both chrome adn firefox, and I get the same
[15:34] <dbugger> no proxy settings
[15:37] <qwebirc8233> Can someone tell me what the difference between init=/sbin/bootchartd and rdinitrd=/sbin/bootchartd? Should I put them together, or just the last?
[15:37] <Kakila> Hi, I need help with users/group admin. We have a very dynamic user database (at school, changes every year) and we would like that all new users belong to certain groups. How can we automate this?
[15:39] <cfhowlett> Kakila, add a group with the profiles/permissions you want, assign users to your new group(s)
[15:39] <Kakila> cfhowlett: thx, could you extend on that? where can I read about profiles/
[15:41] <cfhowlett> Kakila, https://help.ubuntu.com/14.04/serverguide/user-management.html
[15:41]  * Kakila nods and dives into the link
[15:42] <Fishscene> …not to mention writing it into a script works wonders for automating.
[15:42] <cfhowlett> Fishscene, indeed!
[15:44] <JCT> can i uninstall ubuntu when windows 7 is still installed on?
[15:44] <reisio> yes, few provisos
[15:45] <cfhowlett> jct of course. you'll need to re-establish the windows bootloader however
[15:45] <reisio> and consider what you'll do with the soon-to-be unused disk space
[15:45] <JCT> windows 7 and the recovery loader i have on it are still on.
[15:45] <JCT> sda 1 and 4 are that respectively
[15:45] <dracnoc> Kakila: http://www.thegeekstuff.com/2009/06/useradd-adduser-newuser-how-to-create-linux-users/
[15:46] <JCT> sda 3 is ubuntu
[15:46] <JCT> and sda 2 is free
[15:46] <JCT> is it a command line at all?
[15:47] <JCT> hmm...
[15:47] <Kakila> dracnoc: cfhowlett: thank you, it seems that the options EXTRA_GROUPS and ADD_EXTRA_GROUP is what I need to modify in /etc/adduser.conf, this was really useful. Thx
[15:47] <JCT> but drive D has a bunch of data i never put there.
[15:48] <cfhowlett> Kakila, happy2help.
[15:48] <JCT> looks like a partition. idk
[15:48] <dracnoc> Kakila: np, and good luck :)
[15:48] <JCT> i will snapshot it
[15:48] <Kakila> cfhowlett: I guess the only way of doing this to existing users is with a script, right?
[15:48] <cfhowlett> Kakila, no you could do manually ... each user ... each time ... if you *really* wanted to ...
[15:49] <Kakila> cfhowlett: oh, not possible, we are talkng about >1000 afs users :D I will do a script.
[15:49] <cfhowlett> Kakila, :)
[15:51] <JCT> this is the D drive. http://imgur.com/ho39dyZ
[15:52] <JCT> my i didn't put it on there, the partition mustve when i installed ubuntu.
[15:52] <padhu> Ubuntians, please suggest good Multi function laser printer cost around 100 bucks
[15:52] <JCT> can i uninstall ubuntu using that?
[15:53] <cfhowlett> JCT, http://www.makeuseof.com/tag/how-to-safely-uninstall-ubuntu-in-windows-dual-boot-environment/
[15:53] <john_rambo> I installed Dropbox by downloading the .deb form their .... Now when I do #apt-get purge dropbox ...I get "Package 'dropbox' is not installed, so not removed"
[15:53] <qwebirc8233> what the difference between init=/sbin/bootchartd and rdinitrd=/sbin/bootchartd? Should I put them together, or just the last?
[15:54] <john_rambo> their website *
[15:54] <asad2005> After upgrading from the previous LTS to 14.04 i had a problem with desktop not showing and i have done many things but it seems purge fglrx-* restored my desktop but with unity and the search toll blurred. I am stuck on this please help
[15:54] <cfhowlett> john_rambo, dpkg -r dropbox
[15:54] <MrMonkey31> oi.  #ubuntu, help!
[15:54] <MrMonkey31> when I use rename on multiple files in gThumb 2.14 it appears to change the jpegs themselves in some way, to not show up again anywhere that I point gThumb to
[15:55] <Kakila> cfhowlett: thanks again, bye
[15:55] <MrMonkey31> has this been an issue for anybody here?
[15:57] <lephisto> dbrown: then check if name resolution works and/or you can connect to your fritzbox by ip
[15:58] <sonic_> I need help, efibootmgr will not run because /sys/firmware/efi does not exist, but this laptop does boot in efi mode
[15:59] <dracnoc> MrMonkey31: can't say gthumb has ever given me that problem, but then again i can't remember what year i last used it ...
[15:59] <dracnoc> sonic_: what make/model laptop is it?
[15:59] <sonic_> acer x501
[15:59] <MrMonkey31> dracnoc: is this where you turn me on to something new and cool? :>
[15:59] <sonic_> There is no legacy bios boot option
[16:00] <dracnoc> MrMonkey31: possibly ... shotwell might suit your needs ;)
[16:00] <kostkon> john_rambo, type sudo apt-get purge dropb and press TAB  or use the software centre to uninstall it
[16:01] <cfhowlett> MrMonkey31, you want cool?  YOU want COOL!  you can't HANDLE cool!  sudo apt-get install ubuntustudio-photography
[16:01] <JCT_> ummm... can i uninstall ubuntu again?
[16:01] <JCT_> i want to uninstall it.
[16:02] <MrMonkey31> dracnoc: I'm ready to switch over to shotwell!  all I truly need is an import function for photos, and ideally a rename function which kicks in on import; cfhowlett: I suspect you might be right about everything!
[16:02] <bekks> JCT_: Then just install the OS you want instead.
[16:02] <john_rambo> dpkg -r says dpkg: warning: ignoring request to remove dropbox which isn't installed ........and pressing tad doesnt auto complete  ...trying SC
[16:02] <JCT_> windows 7 is already on.
[16:02] <john_rambo> tab*
[16:02] <kostkon> john_rambo, ok
[16:02] <sruz25> So boot freezes on "running init-bottom ... done" with radeon drivers when using linux 3.13+ and the syslog doesn't contain anything from that boot. Any idea how to get some information on what is happening?
[16:03] <sonic_> efivars is built in, why would /sys/firmware/efi not exist?
[16:04] <john_rambo> kostkon, SC worked ... Thanks
[16:04] <bekks> JCT_: Then just use the partitions in Windows 7 as you would normally do.
[16:04] <kostkon> john_rambo, np
[16:05] <sruz25> it boots fine w/ kernel 3.11.
[16:05] <sruz25> which is what I'm using atm
[16:06] <JCT_> there is files on the D drive that suddenly appeared when i told it to create a partition, and it took up about 11 gb. is that it?
[16:06] <JCT_> i want to keep the files on W7 i already have
[16:06] <bekks> JCT_: We dont know what your partition "D" is.
[16:06] <JCT_> let me take a snapshot..
[16:06] <Basketballl> when i use a rtcwake to sleep my computer why does the time get stuck at the time when it goes to sleep
[16:07] <JCT_> http://imgur.com/ho39dyZ
[16:07] <JCT_> that's the files
[16:07] <JCT_> it's a local disk/ HDD
[16:08] <JCT_> i told it to create a partition in the installation
[16:08] <bekks> JCT_: Which doesnt mean a thing, to be honest.
[16:08] <JCT_> i have a boot option in grub2 called W7 recovery loader
[16:08] <bekks> JCT_: Since you want to use those partitions in Windows, you have to make sure your Windows files you want to keep arent on the partitions you want to reformat.
[16:09] <bekks> JCT_: To get rid of grub, you have to boot your windows 7 cd and repair the boot environment.
[16:09] <JCT_> this is impossible. i want to transfer users, files, and apps to reformat it
[16:10] <bekks> JCT_: ?? It makes no sense to transfer users from linux to windows.
[16:10] <bekks> JCT_: What are you _actually_ trying to do?
[16:11] <JCT_> i confused you. i am trying to take ubuntu off of sda3. W7 and recovery loader are SDA 1 4 respectively.
[16:11] <JCT_> and sda2 is free
[16:12] <JCT_> basically take it off a segment of the drive
[16:12] <bekks> JCT_: So you want to remove Ubuntu - you dont want to reinstall it?
[16:12] <JCT_> yes
[16:12] <bekks> JCT_: Then it makes no sense to transfer users from Ubuntu to Windows.
[16:13] <bekks> JCT: Thats not possible.
[16:13] <JCT> i was confusing you
[16:13] <bekks> JCT: You are still, to be honest.
[16:13] <bekks> JCT: So why dont you just reformat the Ubuntu partition in Windows?
[16:13] <JCT> how?
[16:14] <JCT> all i can see browsing W7 are 2 HDDs.
[16:14] <bekks> JCT: Thats a subject for ##windows
[16:14] <daftykins> boot windows, run diskmgmt.msc
[16:14] <daftykins> simples.
[16:14] <JCT> how do i run that?
[16:14] <JCT> do i run a commandline at startup?
[16:14] <BluesKaj> JCT, you'll regret dumping Linux
[16:14] <JCT> ?
[16:15] <daftykins> JCT: you click start -> run
[16:15] <JCT> i'll robably reinstall it by disc
[16:15] <JCT> some other time
[16:15] <JCT> oh.
[16:15] <JCT> i thought you meant while system was loading
[16:16] <bekks> JCT: Please ask ##windows for Windoews support issues - this is Ubuntu suuport ;)
[16:16] <JCT> what's the runline for this app again?
[16:16] <daftykins> i typed it just above, can't you read up?
[16:17] <reisio> yeah they named it something that doesn't remotely resemble an ordinary win32 executable
[16:17] <reisio> 'cause
[16:17] <daftykins> now now, this isn't the place for slating another OS.
[16:18] <reisio> you don't say
[16:19] <daftykins> no i did! right there!
[16:22] <sonic_> interesting, looks like a ubuntu issue, debian kernel shows /sys/firmware/efi
[16:24] <dustin> i just checked mine, lucky i dont have that efi folder
[16:24] <asad2005> If i install fglrx on 14.04 desktop does not show up and if i purge fglrx unity becomes blurred and solution?
[16:24] <Dylan> I have a PIXMA MG2520 Printer/Scanner and I am using XSane to use the scanner. The printer works fine but XSane cannot detect the scanner. Using Ubuntu 14.04. Any help?
[16:24] <sonic_> dustin: you're probably booting from bios
[16:25] <dustin> i see, i get it now.
[16:26] <whoever> dustin: what is you issue
[16:26] <sonic_> This is a newer kernel than the one on the ubuntu image
[16:28] <girafee> hello room. i upgraded to xubuntu 14.04. everything is good for me except one issue with panel. The window buttons are auto resizing and disappearing and i couldnt find a way to make it always on. please help.
[16:33] <diggzh> tmux user online?
[16:34] <sonic_> tmux is awesome
[16:35] <whoever> sonic_: more awsome than awsoma ?
[16:36] <whoever> sonic_: more awsome than screen  ?
[16:36] <diggzh> sonic: I've setup tmux on my computer, but now I wanna save config, how to save?
[16:36] <sonic_> its certainly better than screen
[16:36] <whoever> diggzh: copy the file someplace that you can find it later
[16:37] <whoever> sonic_: how, i haven't found
[16:37] <sonic_> in .tmux.conf?
[16:37] <diggzh> sonic_:yepe!
[16:37] <diggzh> whoever: u r right..
[16:39] <diggzh> ..it seems I need create tmux.conf by myself
[16:39] <The_Mighty_Cater> Howdy everyone, I'm thinking of buying a chromebook (Acer C720) and installing ubuntu on it, from what I gather it's not as simple as installing it on other systems, can anyone recommend a good online guide? (I want to single boot, no need for chrome os)
[16:40] <sonic_> The_Mighty_Cater: why not just buy a normal laptop?
[16:40] <The_Mighty_Cater> sonic_, price mostly
[16:41] <OerHeks> The_Mighty_Cater, tons of howto's, and installscripts https://github.com/eyecreate/ubuntu-chromebook-installer
[16:42] <whoever> The_Mighty_Cater: check amazon for the same laptop, it will mostlikly be the same price as the chomebook your looking at in store
[16:42] <diggzh> It's easy to install ubuntu on a ChromeBook，http://www.cnet.com/how-to/how-to-run-both-chrome-os-and-ubuntu-on-a-chromebook/
[16:42] <skinux> When I try to login to Ubuntu (Unity/Gnome), after clicking login it seems get stuck between login screen and loading screen. Which log do I want to check to fix this?
[16:43] <whoever> The_Mighty_Cater: you should save an extra 100 and get a real lappy , you'll be happier with the hardware
[16:43] <whoever> The_Mighty_Cater: chomebook may not have a big enough NAND for that
[16:43] <sonic_> The_Mighty_Cater: surely you'd prefer something like a Lenovo B50 over a chromebook
[16:43] <whoever> that beein ubuntu
[16:44] <whoever> The_Mighty_Cater: chomebooks are basicly glorified e-readers
[16:44] <sonic_> exactly
[16:44] <whoever> but if your deadset on it you can get a chomebook but your disto choices may be limited
[16:45] <skinux> I'm not finding anything in /var/log for Unity or Gnome
[16:45] <Quatroking> how do I open task manager in ubuntu and force close a process
[16:45] <sonic_> skinux: why would it be in there?
[16:45] <whoever> skinux: what are you trying to find
[16:45] <bekks> skinux: Take a look at the /home/youruser/.xsession-errors
[16:46] <The_Mighty_Cater> I'm quite drawn to the ssd, (I know I could just pop one into any computer, but again, price), just looking for something light and easy while I travel for a little bit
[16:46] <skinux> All xsession-errors is saying is that it's not being able to write to log files.
[16:46] <The_Mighty_Cater> mostly need it for some light programming, and a little sql
[16:47] <sonic_> how much is the chromebook you have in mind? the lenovo b50 is pretty cheap
[16:47] <whoever> The_Mighty_Cater: if you have a specific task you want a chrombook /tablet for then yes go with it but check hardware and plan for the future before desiding , and dooming yourself into buying a lappy later for the sqame task
[16:47] <whoever> skinux: xsesion errors xorg/
[16:48] <football__> when i suspend my pc using rtcwake why does the clock stop running while it is suspended
[16:48] <whoever> skinux: what is the current prob
[16:48] <football__> so it will never wake up by its self
[16:48] <The_Mighty_Cater> £170, also it's very light
[16:48] <skinux> When I try to login to Unity/Gnome, it gets stuck right after entering username/password, never seems to load.
[16:48] <zzxc> Hey guys, Apache is giving me a message saying I have message saying "(98)Address already in use: AH00072: make_sock: could not bind to address [::]:80". I've checked and nothing is bound to port 80 right now.
[16:48] <zzxc> This is a new install. Anyone have any ideas?
[16:49] <squinty> quadHelix:  System Monitor.   highlight process and right click for options
[16:49] <skinux> I can login to KDE, though.
[16:49] <sonic_> The_Mighty_Cater: which one is it?
[16:49] <The_Mighty_Cater> c720
[16:49] <voldyman> zzxc: try doing 'sudo nc -l 80' after stopping apache
[16:49] <sonic_> skinux: why would you want unity if you have kde ;)
[16:49] <whoever> The_Mighty_Cater: you can get a lappy for roughly the same pice and comprable weight
[16:49] <skinux> Why I'd want it has nothing to do with fixing the problem.
[16:50] <whoever> skinux: you can or can't login to kde
[16:50] <skinux> I'm using KDE right now
[16:50] <EriC^^> everything is stuck on always on top in unity ( though it's not selected in any windows )
[16:50] <whoever> skinux: do you get the kdm when you boot
[16:51] <whoever> skinux: or even lightdm
[16:51] <skinux> Yes, I believe so.
[16:51] <skinux> I believe it's KDM
[16:51] <whoever> skinux: so what happens when you try to log in
[16:51] <zzxc> voldyman: nc -l 80 doesn't seem to do anything its just hanging.
[16:51] <whoever> so the error is not in xorg
[16:51] <whoever> it would be in kdm
[16:51] <voldyman> zzxc: that mean your port 80 is not being used by anything
[16:51] <skinux> It never actually moves past login
[16:52] <whoever> skinux: can you login with that user to a different DE
[16:52] <zzxc> voldyman: Yeah. I checked earlier using netstat -ltnp | grep ':80'
[16:52] <skinux> I can login with the same user to KDE, but not UNity/Gnome
[16:52] <football__> when i suspend my pc using rtcwake why does the clock stop running while it is suspended. So it can never wake up by its self.  For example if it sleeps at midnight it will never wake up but when i manually wake it the time says 12 am even if it is 3 pm
[16:53] <skinux> The problem started when I installed and booted into KDE.
[16:54] <whoever> skinux: odd, try to remove kde, purge it
[16:54] <whoever> skinux: then reboot login to gnome and try again to install
[16:54] <skinux> If I do that and it doesn't solve the problem, I won't be able to get into ANY desktop.
[16:55] <EriC^^> does anybody know how to fix unity being stuck in always on top? ( or maybe that's a setting i inadvertently selected somehow? )
[16:55] <whoever> skinux: or remove gnome, and purge, and reinstall
[16:55] <whoever> or stick with kde
[16:55] <skinux> What is the package name I need to remove, purge, and reinstall for Unity/Gnome?
[16:55] <whoever> skinux: sounds like something whent wrong when you decided to use kd //check key
[16:55] <whoever>                 // check value(s)
[16:55] <whoever>                 // check quantity
[16:56] <voldyman> zzxc: in your apache config, do you use 'listen 80'
[16:56] <whoever> skinux: when you decided to use kde  because i never had that problem
[16:57] <whoever> skinux: i think that you may be better off just backing up the date you want and starting over
[16:57] <skinux> I have no backup
[16:57] <rottik9> Good day I am running zorin on a older hp desk top, and when I set up i used an old password to log on....I need to change it? how do I do this., ty?
[16:57] <whoever> skinux: that sucks but the failure to make a backup does not change the "best solution"
[16:58] <skinux> What is the name of the package I need to remove and reinstall??????????????
[16:58] <zzxc> voldyman: yep listen 80 443
[16:58] <voldyman> zzxc: change it to, listen 0.0.0.0:80
[16:58] <OerHeks> !zorin
[16:58] <whoever> skinux: gnome-3*
[16:58] <voldyman> zzxc: too allow all ip's access use 0.0.0.0 otherwise use 127.0.0.1 for localhost
[16:58] <OerHeks> rottik9, zorin derivate is not supported here
[16:59] <iulian_> Hello world ! I need help,I have a problem in Xubuntu 14.04   -   Xorg process is showing high cpu usage !!!
[16:59] <whoever> skinux: in short you have a realy screwed up install it sounds like and you can spend hours and even days trying to fix it or take the easy way out
[17:00] <skinux> The system was fine until I installed KDE. Only problem is that Gnome/Unity won't actually boot.
[17:01] <whoever> iulian_: i had the same issue with any of the big blotted DE's, i just switched to something light and airy :-)
[17:01] <iulian_> how to fix that ?
[17:01] <whoever> skinux: what happens when you try to login to gnome
[17:02] <skinux> I''ll try it one more time.
[17:02] <whoever> iulian_: pick and install your choice of wm, and then at the login screen select that enviroment
[17:02] <iulian_> xfce is light isn't it ?
[17:03] <whoever> iulian_: yep , and i loves it
[17:03] <whoever> iulian_: you could also use fluxbox , awsome ...
[17:04] <iulian_> Xorg process is showing high cpu usage is the problem :-) in XFCE :-)
[17:04] <iulian_> I have XFCE
[17:04] <iulian_> wm
[17:05] <whoever> iulian_: err d //check key
[17:05] <whoever>                 // check value(s)
[17:05] <whoever>                 // check quantity
[17:05] <whoever> iulian_: err , does xubunu have its own channel
[17:05] <iulian_> ok thx
[17:05] <sonic_> Where is grub.efi?
[17:05] <OerHeks> whoever, it is also supported here.
[17:05] <whoever> iulian_: could always try another distro if you cant hadle the high usage ie arch
[17:06] <whoever> OerHeks: ah, thx
[17:06] <iulian_> :-)
[17:06] <voldyman> zzxc: did it work?
[17:07] <iulian_> xubuntu is fine 4 me
[17:07] <OerHeks> iulian_, how do you tell xorg takes high cpu?
[17:08] <zzxc> voldyman: Sorry I was pulling the a thread. I think I found the issue. I have annother entry in the netstat that is for http-alt over ip6.
[17:08] <iulian_> when I use top comand in terminal that I see
[17:09] <OerHeks> iulian_, and any zombie processes in top?
[17:09] <iulian_> 30% cpu used by xorg
[17:09] <zzxc> voldyman: I'm going to try specificy 0.0.0.0:80 for listen and see if that fixes the error message.
[17:09] <iulian_> no zombie
[17:10] <OerHeks> iulian_, that is not high, can be because the CPU is doint the GPU task? is there a videodriver available?
[17:11] <OerHeks> http://docs.xubuntu.org/1404/hardware-devices.html
[17:11] <iulian_> task 229,no videodriver availabele
[17:12] <OerHeks> iulian_, what GPU? "  lspci | grep -i VGA " # will give one line
[17:13] <iulian_> one moment
[17:13] <whoever> iulian_: so there is the "high" usesage using a cappy default driver
[17:13] <zzxc> voldyman: Ack. Still getting the same message. I'm going to give up for now I have to drive back home anyways. I'll fix it when my connection is better.
[17:13] <voldyman> zzxc: ok
[17:14] <iulian_> 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515/M52 [Mobility Radeon X1300] [1002:7149] (prog-if 00 [VGA controller])
[17:14] <iulian_> 	Subsystem: Acer Incorporated [ALI] Device [1025:009f]
[17:14] <iulian_> 	Flags: bus master, fast devsel, latency 0, IRQ 18
[17:14] <iulian_> 	Memory at c8000000 (32-bit, prefetchable) [size=128M]
[17:14] <iulian_> 	I/O ports at 9000 [size=256]
[17:14] <iulian_> 	Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[17:14] <unopaste> iulian_ you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[17:15] <OerHeks> iulian_, ah ati x1300, there is limited support, as ATI dropped support for 1xxx 2xxx 3xxx 4xx, no solution available.
[17:16] <iulian_> OK Thank You sir
[17:16] <skinux> Okay. When I try to Login to "Ubuntu", login dialog disappears and I'm left with a blue background and a pointer.
[17:17] <iulian_> It is an old laptop but I want to keep it alive :-)
[17:18] <OerHeks> iulian_, you can, just don't run youtube
[17:19] <koffiemolentje> Can someone here help me with a keyboard related question?
[17:19] <iulian_> Ha ha ha ,no you tube then :-)
[17:19] <bekks> That depends on the question.
[17:20] <koffiemolentje> @bekks for some reason ubuntu thinks my caps lock key is a backspaec key http://i.imgur.com/U662GM8.jpg
[17:20] <koffiemolentje> backspace*
[17:21] <bekks> koffiemolentje: Did you redefine key mappings?
[17:21] <koffiemolentje> and my tab key does funky too, it doesn't complete words in the terminal, this occurred after switching keyboards
[17:21] <koffiemolentje> not as far as i know
[17:21] <koffiemolentje> both keyboards have the same layouts
[17:22] <bekks> koffiemolentje: Just for testing, can you switch back to the old one?
[17:22] <koffiemolentje> i'll try it, gimme a sec
[17:24] <koffiemolentje> bekks it doesn't seem to work
[17:24] <koffiemolentje> even after unplugging the new keyboard
[17:24] <bekks> koffiemolentje: is it a usb keyboard?
[17:25] <CodeGos2> in windows there are program that on click of window lets to explore is handles, window clases it was created with, etc. is there anything similar for linux? i wish to click on window of my intrest and get some handle i can use
[17:25] <football__> when i suspend my pc using rtcwake why does the clock stop running while it is suspended. So it can never wake up by its self.  For example if it sleeps at midnight it will never wake up but when i manually wake it the time says 12 am even if it is 3 pm
[17:25] <koffiemolentje> the new one is usb, the old one has an old ps/2 (is that how you call it?)  plug
[17:26] <reisio> CodeGos2: xwininfo/wmctrl/devilspie/2
[17:26] <sonic_> After 6 hours i can finally boot my freshly installed system
[17:28] <sonic_> Spoke too soon, fstab is broked
[17:28] <JCT> i want to take the ubuntu part of my hard drive off, but the disk management can only be controlled by admin, i am not admin
[17:29] <bekks> JCT: Thats a Windows support question.
[17:29] <JCT> k.
[17:30] <koffiemolentje> JCT:  do you have root access?
[17:31] <koffiemolentje> oops nevermind
[17:36] <sean_> hi
[17:37] <mrdeb> hi. does touchscreen work automatically on ubuntu 14.04 if i buy laptop or no
[17:37] <mrdeb> what program handles it
[17:37] <frezix> hi, I just refreshed a page with a youtube video in chromium and my whole computer froze up to the point where I couldn't even ctrl+alt+F1. Why can chromium take up so much resources and how can I prevent this?
[17:38] <rebs> use firefox
[17:38] <limacharlie> Hey, quick question. I've been using Ubuntu for the last 5 years or so, but I've run into an issue that I've never had to deal with (have *always* been the sole account on my machines). I added an account for my wife, but in LightDM it does not ask for a password. She has a password established (verified and double tapped in GUI and passwd) and her account isn't set to auto login or login without a password. Any tips on how to
[17:38] <limacharlie> secure her side of /home?
[17:38] <mrdeb> chromium is less stable than ff or ie
[17:38] <bekks> frezix: Because it uses flash most likely. You cant prevent it by not using any websites that use flash.
[17:38] <mrdeb> chromium is less stable than ff or ie
[17:39] <mrdeb> oinly thing chromium has over ff is that it has current flash now, but ff is stuck with old 11.2
[17:39] <sonic_> I finally have a desktop
[17:39] <bekks> mrdeb: You are mixing up chromium and chrome. Chromium does not have PepperFlash.
[17:39] <malimbar> ss
[17:40] <mrdeb> bekks: same thing. chrome is chromium with updates and logging by google.
[17:40] <frezix> bekks: actually I managed to get pepperflash on chromium. I forgot the link though but I think it was on webupd8
[17:40] <mrdeb> that is not piotn of my statmenet ok
[17:40] <mrdeb> who knows about toutchscreens on 1404
[17:40] <wooowe> Hey guys, so I am having trouble with my ELAN touchscreen, i get an error each time I boot up (and other distros wont even let me boot up with this error). Do I just need to update the kernel, the version i am running is 3.13
[17:40] <bekks> mrdeb: Nonsense. :) Chromiu does not include PepperFlash, which is the current Flash version. And that actually was your basic point.
[17:41] <mrdeb> you dont understand
[17:42] <marco94> hello
[17:42] <mrdeb> hi marco94 welcome to buuntu chot
[17:42] <mrdeb> chat
[17:42] <marco94> hi
[17:42] <wooowe> and i am running 14.04
[17:42] <farbod> hi
[17:42] <mrdeb> 14.04 is pretty smooth now with updates to kernel -16
[17:43] <wooowe> and the touchscreen does work? Just when i touch the screen all it does is move the cursor
[17:43] <lesshaste> how do I wipe a usb key?
[17:43] <lesshaste> I just want to make a blank dos formatted usb key
[17:43] <mrdeb> i dont know about touchscreen
[17:43] <mrdeb> i was going ot buy laptop with it, but i havent tested how that owrks yet
[17:43] <mrdeb> would need to research
[17:43] <wooowe> sudo mkfs.vfat -I /dev/sdb
[17:44] <mrdeb> touchscreens on laptop are a forced microsoft poor concept due to monopoly
[17:44] <acovrig> is it possible to expose/forward a range of ports with iptables?
[17:44] <limacharlie> lesshaste: use the Disks application. click the name of the device on the left, then click the settings icon in the top right. then click "format device".
[17:44] <wooowe> yeah the touchscreen did work just fine on windows
[17:44] <mrdeb> wooowe: are you using chromium
[17:45] <mrdeb> yes windows driver support is proper on new hardware
[17:45] <wooowe> mrdeb: nah just chrome
[17:45] <mrdeb> same thing
[17:45] <mrdeb> run chrome like htis: chromium-browser --touch-events=enabled
[17:45] <mrdeb> or google-stable etc whatever command is
[17:45] <wooowe> oh
[17:45] <wooowe> wow
[17:45] <wooowe> thanks man
[17:46] <mrdeb> no prob
[17:48] <mrdeb> wooowe: also read https://wiki.archlinux.org/index.php/touchscreen
[17:49] <tafa2> guys is there much risk to running to running your own DNS server?
[17:49] <bekks> tafa2: Depends on your setup and your security measurements.
[17:49] <tafa2> bekks
[17:49] <tafa2> well...
[17:49] <tafa2> we need to monitor a bunch of of vpn connections
[17:49] <wooowe> so how do you ugrade your kernel version in ubuntu
[17:50] <tafa2> and each server is running its own dns server internally...
[17:50] <tafa2> the problem is for PPTP connections that require external DNS
[17:50] <tafa2> not sure if I want to open up a dns server to the outside world having never done it before...
[17:58] <wooowe> so just upgraded to 3.16, touchscreen totally works now!
[18:00] <football__> when i suspend my pc using rtcwake why does the clock stop running while it is suspended. So it can never wake up by its self.  For example if it sleeps at midnight it will never wake up but when i manually wake it the time says 12 am even if it is 3 pm
[18:05] <bekks> football__: Because there is nothing running anymore when the system is suspended. It's like turning off your radio clock in the morning by pulling the cable and expecting the cable to magically get plugged back :)
[18:05] <football__> bekks,  so how do i fix it
[18:06] <thecha> bekks i can build you plugs like that for  1 million dollars
[18:06] <thecha> i mean plugs that plug themselves back in magically when plugged out
[18:06] <thecha> well not magivally but
[18:07] <jburd> Hello
[18:07] <bekks> football__: there is no way to fix is but black magic. Literally.
[18:07] <OerHeks> thecha, how it this ubuntu support related?
[18:07] <football__>  bekks  then what ios the point of rtcwake
[18:07] <bekks> football__: I never used rtcwake.
[18:10] <bekks> football__: How old is your BIOS?
[18:10] <football__> 2007
[18:11] <bekks> football__: Thats pretty old - and it is unlikely that it supports a clean ACPI implementation which is required by rtcwake.
[18:11] <Glycan> Hi, I'm trying to install a live USB installation on an external hard drive with unetbootin from a windows system, but unetbootin won't detect it
[18:11] <Glycan> The external hard drive, I mean. Which is FAT32
[18:12] <Glycan> Can anyone tell me what to do about this or where to go for more help?
[18:12] <bubbasaures> Glycan, HD's are not an optimal, use a flash if you have one.
[18:13] <Glycan> bubbasaures: I'm using it to recover stuff from a messed up laptop which has one working usb port
[18:13] <Glycan> So I thought that it would be the best option, so that I could use that one port both for to boot from and back up too
[18:14] <bubbasaures> Glycan, Still not optimal boot with something else like a flash or disc and use the HD for backup.
[18:14] <Glycan> bubbasaures: how?
[18:14] <bubbasaures> Glycan, How what?
[18:15] <Glycan> I'd have to remove the flash drive to plug in the HD, which would make the OS stop working, no?
[18:16] <Wulframn> Glycan: a live cd/usb? Just load it into RAM.
[18:16] <Glycan> Wulframn: um. I'm not sure I understand
[18:16] <bubbasaures> Glycan,  I suggested a disc as well. A windows OS not reading a HD is ##windows realm anyway.
[18:16] <Wulframn> Glycan: what is it you're trying to accomplish?
[18:16] <Glycan> Oh, with a disc? The disc reader is broken, too.
[18:18] <Glycan> Wulframn: I have a messed up computer I'm trying to recover files from. My original intention was to put ubuntu on a external HD, boot from itm and then copy the files to it
[18:18] <thecha> no no no
[18:18] <thecha> glycan use a lice cd instead
[18:18] <thecha> or make a boot usb
[18:19] <thecha> or easier take the computers hdd and install it into your working computer
[18:19] <Glycan> I've never had that computer's CD slot work properly, and it has only one functional USB slot.
[18:19] <thecha> then you go into ubuntu and access the files
[18:19] <thecha> :) no good?
[18:19] <Glycan> uh
[18:19] <thecha> no?
[18:19] <Glycan> I'm not nearly good enough with hardware to do something like that ;-;
[18:20] <kostkon> Glycan, use a usb hub maybe?
[18:20] <Wulframn> Glycan: download system rescue cd and strap it to a USB. At bootup select the load into RAM option, then wait for it to load. remove the drive and plug in your external HDD. Mount your drives and copy paste away
[18:20] <Glycan> And I was hoping to be able to use that laptop, at least in live-boot mode
[18:20] <thecha> taking the hdd of the messed computer and puting it itno the working computer?
[18:20] <thecha> you want me to teach you?
[18:20] <Glycan> thecha: yes
[18:20] <Glycan> er
[18:20] <Glycan> I mean, yes, to the former
[18:20] <thecha> oh laptop?
[18:20] <thecha> then do what wulfrum said
[18:21] <thecha> wulfrum just soleved it
[18:21] <Glycan> Wulframn: Where is this load into RAM option?
[18:21] <thecha> [20:20:11] <Wulframn> Glycan: download system rescue cd and strap it to a USB. At bootup select the load into RAM option, then wait for it to load. remove the drive and plug in your external HDD. Mount your drives and copy paste away
[18:22] <Glycan> This is during unetbootin's bootloader?
[18:22] <tafa2> does anyone know how to forward pptpd packes to a local dns server?
[18:23] <Wulframn> Glycan: No, when you boot off the USB drive it'll show you a menu. one of the options will be to load the OS into RAM
[18:24] <Wulframn> Glycan: once it is loaded into RAM you can remove the USB stick and the computer won't crash
[18:25] <thecha> but only with newer machiens the ram will be large enough todo this
[18:25] <thecha> if you are sitting on a machine like mine with a more average 512 mb ram that might not work
[18:26] <OerHeks> tafa2, so you want to forward packages from an encrypted tunnel?
[18:26] <OerHeks> lolz
[18:26] <tafa2> *packets
[18:26] <Wulframn> thecha: that's why you use system rescue cd. It's tiny
[18:27] <turbs> Hello, can somebody help me?
[18:29] <wouter__> Hi
[18:29] <wouter__> Hello?
[18:29] <turbs> Hi
[18:30] <As3m1> hi
[18:30] <wouter__> Ow, it works
[18:30] <turbs> Can somebody help me with TCL ?
[18:30] <wouter__> I've never used IRC before
[18:30] <turbs> I have ubuntu 14, and i install all tcl scripts, then i try to ./configure eggdrop
[18:31] <kostkon> wouter__, hi
[18:31] <turbs> Still getting message like, tcl cannot be found on this system ?
[18:31] <wouter__> Hi kostkon
[18:31] <dufa> Hello! I would need some help with using apt-get. I'm trying to install the ubuntu-sdk package but run into an error. http://paste.ubuntu.com/8501861/ << my apt-get output. I'm not sure where to start troubleshooting. Any pointers?
[18:32] <Glycan> Wulframn: In my knowledge there's the BIOS menu, then unetbootin bootloader, then directly into Ubuntu
[18:32] <Glycan> Wulframn: where do I find the boot into RAM thing? Is it a boot argument?
[18:32] <kostkon> dufa, on 14.04?
[18:33] <dracnoc> dufa: what happens if you try to install ubuntu-sdk-libs-dev ?
[18:33] <dufa> yes 14.04
[18:33] <kostkon> dufa, if you are on 14.04 then you need to add the PPA for the latest stuff http://developer.ubuntu.com/start/ubuntu-sdk/installing-the-sdk/
[18:34] <turbs> kostkon, do you know something about tcl ?
[18:34] <Wulframn> Glycan: No. pop the USB into your drive and boot off of it. You'll see a blue menu with a bunch of boot options. Scroll with the arrow keys to the load into RAM option. hit enter. It'll tell you when it's done loading into ram.
[18:35] <dufa> kostkon: I have added ppa:ubuntu-sdk-team/ppa and run apt-get update
[18:35] <Glycan> This is the unetbootin one.
[18:35] <kostkon> dufa, ok
[18:35] <Glycan> Right? The bootloader?
[18:35] <kostkon> turbs, what's the problem
[18:36] <Wulframn> Glycan: No, after you've put sysresccd onto your USB.
[18:36] <turbs> I installed all tcl
[18:36] <turbs> tcl-dev etc.
[18:36] <turbs> But when i try to ./configure eggdrop
[18:36] <turbs> Still getting message like "Tcl cannot be found on this system."
[18:36] <turbs> Why ?
[18:36] <dufa> dracnoc: installing ubuntu-sdk-libs-dev results in the same kind of "unmet dependencies" error, just a longer list of packages
[18:37] <dufa> dracnoc: thyre all qt related
[18:38] <kostkon> dufa, apt-cache policy ubuntu-sdk-libs-dev
[18:38] <Glycan> Wulframn: oh, ok
[18:38] <Glycan> thanks a bunch
[18:38] <Wulframn> Glycan: I'm doing this from my phone or I'd be a ton more helpful. Sorry :-P
[18:40] <dufa> kostkon: apt-cache policy ubuntu-sdk-libs-dev    http://paste.ubuntu.com/8501943/
[18:41] <whimsicalthought> Ah, the Ubuntu IRC channel
[18:41] <whimsicalthought> The friendliest of *nix IRC channels!
[18:41] <cihhan> Anybody has experience with data recovery for external hdd? yesterday my hdd started saying you need to format it... based on the forums, i applied chkdsk on windows and that error is gone. but not it shows all empty :(
[18:42] <daftykins> what file system was on it? NTFS?
[18:42] <cihhan> daftykins, yes
[18:42] <kostkon> dufa, you could disable the ppa for now and use the version from the repos. then you could try reenabling the ppa and see if you can update the packages
[18:42] <daftykins> cihhan: then you should really be asking in ##windows
[18:42] <compdoc> cihhan, if your drive is having problems, running chkdsk is a bad idea
[18:42] <cihhan> daftykins, i think u r right
[18:42] <cihhan> compdoc, :(
[18:43] <compdoc> cihhan, open Disk Utility and see if you can find the drive in the list
[18:43] <CodeGos2> is there any way to sandbox wine application? i wish to run some app that might contain malware and i dont wish to affect system
[18:43] <tafa2> CodeGos2 is ur wine app windows based?
[18:44] <CodeGos2> tafa2: yes
[18:44] <tafa2> well then its unlikely to do much damage to ur nix host as it was coded with windows in mind
[18:44] <tafa2> you *should* be ok
[18:44] <cihhan> compdoc, let me switch to ubuntu first; but right now im checking with seagate tools
[18:45] <compdoc> cihhan, does seagate tools show SMART info?
[18:46] <cihhan> compdoc: i used seagate recovery tool and it is able to show the directories and the data -- to be honest, i feel like somelthing like file table or partition table is lost
[18:46] <whimsicalthought> CodeGos2: How about run it in a virtualbox?
[18:46] <Kolanis> I have a public ssh key and I have configured that into my server too; the public SSH key is located in the .ssh folder as usual, and I can easily connect to the server with the key through 'ssh' on terminal...but when I try to login through putty, I can't log in! It says "no supported authentication method" - How do I fix this?
[18:46] <squinty> CodeGos2:  you may receive a more definitive answer in the #winehq channel here on freenode
[18:46] <Kolanis> squinty: I need your help!
[18:46] <compdoc> cihhan, then boot ubuntu
[18:47] <whimsicalthought> CodeGos2: Perhaps a better solution is to run it in a virtual machine that is disconnected from the network
[18:47] <cihhan> ok
[18:47] <squinty> Kolanis:  please read the channel rules.
[18:47] <whimsicalthought> With Guest Additions and shared drives disabled of course.
[18:47] <whimsicalthought> Kolanis: What do you need help with?
[18:47] <Kolanis> whimsicalthought: putty.
[18:47] <Kolanis> whimsicalthought: read the message.
[18:47] <whimsicalthought> Apologies, I didn't see that.
[18:48] <cihhan> compdoc, i htink i need to go to office for ubuntu -- i remember that n my laptop i have another old linux currently since i was formatting my comp completely :(
[18:48] <dufa> kostkon: trying to install one of the depends, qtbase5-dev gives a similar error: http://paste.ubuntu.com/8501979/ . The version numbers are the same but there is a different suffix (-1ubuntu14.2 instead of -1ubuntu15~trusty1~test1), might this be the problem?
[18:49] <cihhan> compdoc, i ll be there in one hour -- i hope that s fine
[18:49] <compdoc> heh
[18:49] <cihhan> compdoc, or let me try with the other linux -- even though it s old now
[18:49] <compdoc> ok
[18:50] <kostkon> dufa, could be
[18:53] <ilhami> Hey :D
[18:56] <ilhami> anybody here?
[18:56] <whimsicalthought> I am here
[18:56] <whimsicalthought> How are you?
[18:56] <ilhami> I need a ppa for jekyll.
[18:56] <yorwos> hey guyz ,something weird happened here ...
[18:56] <ilhami> instead of installing Ruby and RubyGems individually.
[18:56] <bubbasaures> !ppa | ilhami
[18:57] <ilhami> I am using elementaryOS but it seems like it doesn't have the jekyll package. :)
[18:57] <bekks> !elementary | ilhami
[18:57] <ilhami> Too inactive!
[18:58] <ilhami> 1739 vs 107 LOL
[18:58] <bekks> ilhami: Which doesnt make ElementaryOS being supported in here.
[18:58] <OerHeks> ilhami, we have told you that before
[18:58] <ilhami> LOL
[18:59] <gerhard> #germany
[18:59] <OerHeks> gerhard, is that a support question?
[18:59] <ilhami> lol
[18:59] <bubbasaures> !gr
[18:59] <bubbasaures> close greek
[18:59] <OerHeks> try !de
[19:00] <bubbasaures> !de
[19:01] <von_trall> thx
[19:03] <cihhan> compdoc: ok im on linux now -- sorry for the lateness
[19:03] <compdoc> does it have the command smartctl?
[19:04] <compdoc> or disk util on the desktop?
[19:04] <MagicSpud> hello how do I fix the bluish flash videos such as youtube on opera browser ubuntu 14.04? on firefox they play flawless
[19:04] <cihhan> compdoc: let me check
[19:04] <cihhan> i installed smartctl now
[19:04] <compdoc> cool
[19:05] <compdoc> the command is:  smartctl -a /dev/sda  (or whatever dev the drive is)
[19:05] <cihhan> ok
[19:05] <cihhan> let me check
[19:05] <bekks> MagicSpud: You should use a more recent browser, since Opera is pretty outdated on linux. And for the blueish videos you can disable the hardware acceleration in flash.
[19:06] <lucas_> does somebody use elementary os
[19:06] <cihhan> compdoc: sdc or sdc1?
[19:06] <bekks> !elemenatry | lucas_
[19:06] <bubbasaures> lucas_, Not supported here, they have a channel.
[19:06] <compdoc> cihhan, can you paste the output to pastebin.com
[19:06] <bekks> !elementary | lucas_
[19:06] <compdoc> sdc
[19:06] <MagicSpud> bekks I already knew that. Not finding any fixes on the internet made me come here to ask
[19:07] <lucas_> thank you very much
[19:07] <Genome36_> hello
[19:07] <bekks> MagicSpud: So did you disable hardware acceleration yes?
[19:07] <cihhan> compdoc: somehow this is what it said, /dev/sdc: Unknown USB bridge [0x0bc2:0x2320 (0x100)]  Smartctl: please specify device type with the -d option.
[19:07] <bekks> *yet
[19:08] <compdoc> try sda or sdb
[19:08] <MagicSpud> bekks moreover...I can see adds flawlessly while the video will play bluish
[19:08] <compdoc> its a sata drive?
[19:08] <Genome36_> i need to make a python3 script run 24/7 on a tty console but it drops after 24 to 36 hours of running
[19:08] <Genome36_> why is that so ?
[19:08] <bubbasaures> compdoc, Use nicks always it gets confusing otherwise.
[19:09] <MagicSpud> bekks of course not! I love my acceleration it is the reason why I use nvidia driver instead of default crappy ubuntu driver
[19:09] <cihhan> compdoc, mount shows it on sdc1 -- shall i still do it on the sda or sdb?
[19:09] <bekks> MagicSpud: Disable hw acceleration in the flash settings to fix your blueish videos.
[19:09] <MagicSpud> bekks and I also love opera
[19:09] <bekks> MagicSpud: Opera on linux is dead - it is discountinued.
[19:09] <MagicSpud> bekks and become a switcher? no thanks I am human
[19:09] <compdoc> cihhan, no. maybe your smartctl is older. see what options it has
[19:10] <bekks> MagicSpud: Whatever. You have been told how to fix your issue. It is up to you.
[19:10] <MagicSpud> bekks ooh no that are bad news
[19:10] <cihhan> compdoc: it s from 2010
[19:10] <bekks> MagicSpud: Opera is discontinued on linux for years now.
[19:11] <kostkon> bekks, not really http://www.omgubuntu.co.uk/2014/06/opera-linux-chromium-download-released
[19:11] <bubbasaures> MagicSpud, Note making pronouncements like crappy and I wont change, narrows down whom might help you, if you get any help at all.
[19:11] <kostkon> bekks, it's still in beta though
[19:11] <kostkon> http://www.omgubuntu.co.uk/2014/09/opera-25-beta-adds-linux-support-new-bookmarking-feature
[19:11] <compdoc> cihhan, it doesnt know how to query the usb port, I guess. might google to see if its possible
[19:11] <bekks> kostkon: Oh, so they revived their dead horse. Ok. :)
[19:11] <kostkon> bekks, yeap :)
[19:11] <cihhan> compdoc: if you want, let me go to office for current ubuntu  -- will u be available 1 hour later?
[19:12] <MagicSpud> bekks any worthy successor? when some good piece of software dies...It usually gives birth to new one
[19:12] <compdoc> cihhan, its an external drive?
[19:12] <bekks> MagicSpud: Firefox or Chrome. I'd suggest Chrome for the more current flash implementation.
[19:13] <cihhan> compdoc: yes
[19:13] <cihhan> compdoc: seagate external hdd
[19:13] <compdoc> cihhan, well, go if you want, but theres a chance it might not work on that usb drive. some support SMART and some dont
[19:14] <MagicSpud> bekks google is a big shark...I like to swim scantily clad
[19:14] <football__> when i suspend my pc using rtcwake why does the clock stop running while it is suspended. So it can never wake up by its self.  For example if it sleeps at midnight it will never wake up but when i manually wake it the time says 12 am even if it is 3 pm
[19:14] <MagicSpud> bekks I ll better keep on with the foxy
[19:14] <MagicSpud> foxy lady
[19:14] <bekks> MagicSpud: And with the outdated flash. Your choice.
[19:14] <yecril71pl> What provides support for news URL scheme?
[19:14] <MagicSpud> fire fox
[19:15] <MagicSpud> got it?
[19:15] <yecril71pl> I tried { gvfs-open 'news:1bp21kqu4hqss$.31ga4jgjsbk6.dlg@40tude.net'; } and it failed.
[19:15] <cihhan> compdoc: I see :(   Anyother suggestions? As I mentioned before Seagate data recovery shows all the folder when scanned (but I tried with demo and I dont know what I am capable with demo version)
[19:15] <cihhan> compdoc: That s why I was sort of thinking that something like a partition table is lost :(
[19:16] <al58> x plane10
[19:16] <compdoc> cihhan, yeah. I wanted you to see SMART to see if trhe drive is dying, which might be the reason a parition table is lost. They dont usualy just disappear
[19:16] <al58> xplane 10
[19:17] <OerHeks> al58, buy it :-)
[19:18] <cihhan> compdoc: my guess is that -- yesterday i moved my laptop a bit and the hdd was connected. right after that, it gave the you need to format error even though i wasnt using the external hdd that time. so as forums suggested i made the mistake of doing chkdsk /x and now it s empty
[19:18] <cihhan> compdoc: so maybe while moving it got some sort of disconnected and filetable got corrupted and bcs of that chkdsk cleared it
[19:19] <compdoc> cihhan, can the linux you have now mount it or see anything?
[19:19] <al58> ciao
[19:19] <al58> x plane 10
[19:20] <OerHeks> al58, yes, go buy it :-)
[19:20] <cihhan> compdoc: on linux, still the same empty. in fact not completely empty. i was checking with testdisk yesterday and right after it, it showed one of the folders but still empty inside
[19:20] <bubbasaures> al58, This is support can we help you?
[19:21] <Glycan> Is there any reasonable way to export system-wide settings than just compressing /etc?
[19:21] <cihhan> compdoc: on linux, still the same empty. in fact not completely empty. i was checking with testdisk yesterday and right after it, it showed one of the folders but still empty inside
[19:22] <donbirdy> Greetings my fellow internetians
[19:22] <yorwos> hey guyz , i think for the first time i saved my session logging out and after this its taking much longer to reboot , is there a way to undo what i did ?
[19:23] <yorwos> *boot
[19:23] <compdoc> cihhan, well, doubt Ubuntu will see anything else.
[19:24] <bubbasaures> !details | yorwos a lot missing
[19:24] <cihhan> compdoc: Mac didnt see anything either
[19:25] <bubbasaures> yorwos, At the least the release, how it's installed, desktop and how you saved the session.
[19:26] <compdoc> cihhan, you do need to know if you can trust the drive again, so you should look at SMART before doing anything, if possible. I would remove the drive from the case and attach directly to a PC to elminate any problems with usb
[19:26] <yorwos> i logged in kde session for first time and then whenever i go back to ubuntustudio session things like kwin qctljack come preloaded and the panel and desktop and desktop icons have wrong colors/something
[19:27] <yorwos> i think 2-3 of my program shortcuts in my panels changed icon also
[19:27] <yorwos> the deperators were definetely invisible between em
[19:27] <yorwos> separators*
[19:27] <bubbasaures> yorwos, You are not really making sense.
[19:28] <bubbasaures> just saying if you want help here
[19:29] <yorwos> its ok i think i know what to do ...
[19:29] <yorwos> i hope brb
[19:31] <cihhan> compdoc: after retrieving my data it s not a big problem. i can buy another hdd if needed -- but seagate diagnostic was showing the drive is fine
[19:31] <bubbasaures> I want to know what is beyond the singularity of a black hole, can anyone help. ;)
[19:31] <yecril71pl> Why am I discouraged from asking for clarification in Ask?
[19:32] <bubbasaures> !topic | yecril71pl
[19:33] <ScottD> Hello all.  I upgraded from 12.04.5 LTS to 14.04.1 LTS.  The system has a pair of SSDs in software RAID1 with just a single filesystem (/) on them...
[19:33] <ScottD> Everything used to work fine.  Now, I get an endless repeat of:  Incrementally starting RAID arrays... / mdadm: CREATE user root not found / mdadm: CREATE group disk not found / Incrementally started RAID arrays.
[19:33] <ScottD> My GoogleFu has so far failed me.  I’ve been arguing with it for two days!
[19:34] <fowl> hi flash does not work
[19:34] <yecril71pl> bubbasaures: so what?  Ask is a part of Ubuntu.
[19:34] <fowl> how do i install it
[19:34] <fowl> doesnt ubuntu come with flash
[19:34] <bekks> !flash | fowl
[19:35] <ScottD> The array appears to be perfectly healthy.  It just won't boot.  :-(
[19:35] <bubbasaures> yecril71pl, Only Ask I see is a web page can you enlighten us what you mean?
[19:35] <fowl> bekks, thank you!
[19:36] <yecril71pl> I wanted to ask a complementary question to <URL: http://askubuntu.com/questions/514125/url-protocol-handlers-in-basic-ubuntu-desktop >
[19:36] <yecril71pl> but they say you should not ask for clarification
[19:38] <yorwos> how can i change the color of my font for desktop shortcuts and fonts on my minimized program bars in bottom panel ? they gone almost black same color with the rest of the bar i want them bacl to white or something - using ubuntustudio xfce with kwin over it
[19:38] <bubbasaures> yecril71pl, This is an issue with askubuntu, not ubuntu support, the word "clarification" is not even used. If you can be specific in a ubuntu support need carry on.
[19:39] <guntbert> yecril71pl: problems with AskUbuntu are not on topic here - we *can* talk in #ubuntu-offtopic
[19:39] <cihhan> compdoc: do u have any suggestions?
[19:39] <compdoc> its ntfs?
[19:40] <yecril71pl> bubbasaures: I would like to know what to install to have a handler for news URI scheme.
[19:40] <cihhan> compdoc: yes :/
[19:41] <compdoc> attach it to a windows machine and see if you can find a util to repair it
[19:41] <Susning> I'm looking for a gui SFV checker. I really need one and prefer gui.
[19:41] <daftykins> NTFS recovery is not an ubuntu support query
[19:41] <Susning> Any recommendations?
[19:41] <cihhan> thanx compdoc, i ll check it
[19:43] <squinty> cihhan:  might want to explore using the following  http://www.cgsecurity.org/   testdisk  Photorec
[19:43] <EriC^^> cihhan: testdisk can recover it
[19:43] <EriC^^> ( most likely )
[19:44] <EriC^^> boot a liveusb, and sudo apt-get install testdisk
[19:44] <cihhan> squinty: Thanks. I have tried testdisk a bit but I m not sure what I m doing an I dont want to do a big mistake
[19:44] <EriC^^> cihhan: i'll walk you through it
[19:44] <EriC^^> if you want
[19:44] <cihhan> Thanks EriC^^ that would be very good
[19:44] <cihhan> in fact i logged in to win -- in fact i have testdisk here or do u want me to move back to linux?
[19:45] <EriC^^> i'd prefer linux
[19:45] <cihhan> ok let me reboto then even though it s a bit old :(
[19:46] <daftykins> i'm a tad concerned that means cihhan's running 8.04
[19:46] <EriC^^> 8.04?
[19:47] <EriC^^> i've no clue what cihhan's up to
[19:48] <daftykins> EriC^^: lost his partition table on an NTFS disk
[19:48] <daftykins> in the first instance i directed said user to ##windows, but i got ignored
[19:50] <cihan> EriC^^: Im back
[19:50] <EriC^^> cihan: wb
[19:50] <cihan> Thanks Eric^^
[19:51] <EriC^^> type sudo apt-get install testdisk
[19:52] <cihan> EriC^^, ok i have it
[19:52] <EriC^^> ok
[19:52] <EriC^^> sudo testdisk
[19:52] <EriC^^> then press no log, then no log
[19:53] <daftykins> EriC^^: oh it seems nobody ever got as far as checking SMART, could be worth a go :)
[19:53] <cihan> EriC^^, sudo testdisk -> no log ->chose sdc
[19:54] <EriC^^> cihan: select the disk
[19:54] <cihan> EriC^^, sdc and intel
[19:54] <cihan> now?
[19:54] <EriC^^> ok did you select intel?
[19:54] <cihan> EriC^^, yes
[19:54] <EriC^^> ok
[19:54] <EriC^^> press search
[19:55] <cihan> you mean analyse?
[19:55] <EriC^^> yeah sorry
[19:55] <cihan> EriC^^, yes chose analyze
[19:55] <ScottD> Anyone mind if I just scream and start throwing things?
[19:55] <EriC^^> daftykins: if you think it might help, proceed
[19:56] <EriC^^> ScottD: /join #defocus
[19:56] <ScottD> lol
[19:56] <ScottD> Upgrading from 12.04.5 to 14.04.1 has broken my RAID.
[19:57] <CoreIT84> cryptodan, you here too ?  lol
[19:57] <cihan> EriC^^: quick search shows this, * HPFS - NTFS              0  32 33 121601  25 24 1953519616 [Seagate Expansion Drive]
[19:57] <EriC^^> ok
[19:57] <EriC^^> is that the partition you want?
[19:57] <ScottD> No mdadm experts around, eh?  :-/
[19:57] <EriC^^> press "p" to view the files
[19:57] <Hulio> hi, is it possible to install ubuntu 14.04 side with windows 8.1 ?
[19:57] <Hulio> i used to do tthat WUBI
[19:58] <cihan> EriC^^, it doesnt show the files there
[19:58] <EriC^^> what does it show?
[19:58] <bubbasaures> Hulio, A virtual is inside, wubi wont work nor is supported.
[19:58] <Hulio> come on
[19:59] <daftykins> cihan: something you could do in addition to this process, is in another terminal window, "sudo apt-get update && sudo apt-get install smartmontools pastebinit" then run "sudo smartctl -a /dev/sdX | pastebinit" (where sdX is actually the disk you're dealing with
[19:59] <cihan> it shows recylcle.bin, data, system volume information -- data is just a bit
[19:59] <Hulio> so what can i do to have ubuntu install?
[19:59] <guestuser> Need some help with an install and the floppy issue if any one has a minute.
[19:59] <bubbasaures> !uefi | Hulio
[19:59] <guestuser> Installing Ubuntu server 14
[19:59] <daftykins> !details | guestuser
[19:59] <bubbasaures> Hulio, A W8 OEM is UEFI.
[20:00] <Hulio> i have no clue what u're talking about.
[20:00] <guestuser> Trying to install Ubuntu server and it hangs. Error reported is the fd0 hang.
[20:00] <Hulio> all i want is how to install it?
[20:00] <Hulio> do i need to partition a space for it?
[20:00] <cihan> daftykins, let me check that
[20:00] <Hulio> i dont want to loose windows as well
[20:00] <bubbasaures> Hulio, Use nicks, and to install you will have to know.
[20:01] <cihan> daftykins, it says unknown usb bridge
[20:01] <bubbasaures> Hulio, Image/clone the windows, make a recovery disc than do the ubuntu install.
[20:01] <guestuser> No option to disable floppy controller in the bios as this mobo does not even have a floppy controller.
[20:01] <Hulio> bubbasaures, let say if i partition a space for it..should it work? if i install from CD ROM?
[20:02] <guestuser> During install it hangs. When I check tty4 it shows a loop on seeking fd0.
[20:02] <cihan> EriC^^, so quick search didnt show anything else?
[20:02] <guestuser> See https://www.google.com/search?client=ubuntu&channel=fs&q=ubuntu+install+fd0+hang&ie=utf-8&oe=utf-8 for similar reports
[20:02] <guestuser> It was a known issue that I thought was corrected as I haven't experienced it in a while.
[20:02] <bubbasaures> Hulio, Your overall generalization is correct "if i partition a space for it..should it work? if i install from CD ROM?" However it is done differently in a UEFI setup is all.
[20:02] <squinty> Hulio:  you need to read https://help.ubuntu.com/community/UEFI   once you have determined if anything there applies to your system, then you can start to consider installing ubuntu
[20:03] <bubbasaures> Hulio, And don't ignore the clone windows option, it will save your booty if you screw up.
[20:03] <Susning> Anyone... GUI SFV checker that works fine in Ubuntu?
[20:03] <daftykins> cihan: to what command?
[20:03] <Hulio> bubbasaures, basically i have C drive of 256GB,  i can partition 50GB and leave it empty then ...boot ubuntu from the CDROM then install to that new partition right?
[20:03] <Hulio> bubbasaures, is it a yes / or a no
[20:04] <cihan> daftykins, smartctl -a /dev/sdc
[20:04] <bubbasaures> Hulio, read the UEFI link we gave you, yes or no here is not adequate, you are not understanding
[20:04] <larsantos> Hulio: yes, but you have to read the information to learn how to do itproperly
[20:04] <cihan> daftykins: The problem is my linux is old here -- if needed i can go to office for the current ubuntu
[20:04] <guestuser> Any comments on blacklisting fd0 when booting from the installer cd? If I can get the system installed I can handle it from there but udev is not timing out. Waited 20 minutes on the alst attempt.
[20:04] <daftykins> cihan: as in your workplace? how old are we talking?
[20:05] <cihan> it s from 2010 max
[20:05] <larsantos> Hulio: if you don't read the information and do some mistake you can ruin the windows installation
[20:06] <Hulio> larsantos, great :)
[20:06] <larsantos> Hulio: but if done correctly, yes you can have both OSs installed side by side
[20:06] <squinty> cihan: in the hour you take to go to your office you can torrent download 12.04 or 14.04 and unetbootin it onto a usb stick.  why make it harder than it has to be?
[20:06] <cuddylier> Anyone know how to diagnose cron apparently opening a lot of lsof processes for no reason even when crons are all disabled?
[20:07] <bubbasaures> Hulio, I think worth having as a link, and excellent user on the forums for help, on daily. http://ubuntuforums.org/showthread.php?t=2147295
[20:07] <Hulio> i am reading it
[20:07] <Hulio> bubbasaures, so windows 8 is EFI mode right?
[20:07] <cihan> squinty, u r right on that
[20:07] <Hulio> i'm just to make sure
[20:07] <larsantos> Hulio: just beware of any mistake and make a beckup of windows to be sure
[20:07] <bubbasaures> Hulio, This a manufacturer install of W8?
[20:07] <Bashing-om> guestuser: IF you have no need of the floppy drive (fd0), then disable it in bios. and the system will no longer see it.
[20:08] <Hulio> bubbasaures, not it is custom install
[20:08] <sim590> Does Unity have any feature like plugins in Gnome 3 ? Like todo app icon that merges itself inside the unity Desktop environnement ?
[20:08] <guestuser> That would work if the mobo had a floppy controller or an option in the bios.
[20:08] <Hulio> i think it is EFI mode
[20:08] <Hulio> it is part of the bios
[20:08] <bubbasaures> Hulio, We can determine this from a live ubuntu easily are you on it now?
[20:08] <Hulio> i think i set that up efi mode in bios
[20:09] <guestuser> Because there is no floppy controller on board it has no option in the bios.
[20:09] <Hulio> brb continue reading it.
[20:09] <guestuser> I get a looping kernel event for end_request I/O error for dev fd0
[20:09] <cihan> squinty, i ll be going to the office -- ill be back in 10-15min
[20:10] <guestuser> Essentially looking for a way to disable this through GRUB or as a kernel option during boot.
[20:11] <guestuser> This way I can at least get the system installed.
[20:11] <bubbasaures> guestuser, Have you checkedthe sum?
[20:11] <guestuser> As in md5sum of the iso?
[20:11] <guestuser> If so then yes.
[20:12] <bubbasaures> guestuser, I would ry a net install
[20:12] <bubbasaures> try*
[20:12] <bubbasaures> !mini | guestuser
[20:13] <guestuser> ubottu: If this is a kernel issue how would changing the medium help? This is happening during udeb.
[20:13] <guestuser> Unless the minimal iso doesn't do hardware recognition.
[20:13] <guestuser> And I'm talking to a bot.
[20:13] <peyam> hi
[20:14] <bubbasaures> guestuser, ubottu is a bot, I would not just auto second guess, it could still just be code error on your medium.
[20:14] <peyam> My thinkpad xubuntu wont update to the newest kernel available on 14.04
[20:15] <guestuser> Can you elaborate on code error?
[20:16] <sim590> I've red on the web that Ubuntu Unity uses application indicators (or applets). I don't see how to add one though...
[20:16] <bubbasaures> guestuser, Could be anything that is the point,I have had summed ISO's not work is all, at this point in my world it is knock out the outliers, unless you have solid info like a knownhardware conflict
[20:16] <guestuser> More like it is a known kernel issue.
[20:16] <guestuser> Which is why I hoped someone would know how to blacklist during boot.
[20:17] <bubbasaures> guestuser, Really and you can show this?
[20:17] <guestuser> Google can
[20:17] <guestuser> https://www.google.com/search?client=ubuntu&channel=fs&q=ubuntu+install+fd0+hang&ie=utf-8&oe=utf-8#channel=fs&q=kernel+issue+%2B+fd0+hang
[20:17] <guestuser> 320,000 results in 0.44 seconds
[20:18] <guestuser> Known to affect debian-installer and anconda among many others.
[20:18] <guestuser> It has been filed as wont-fix on launchpad.
[20:18] <bubbasaures> guestuser, first hit,  2007-03-28, you are just guessing.
[20:18] <guestuser> ?
[20:18] <bubbasaures> this is and was a waste of time
[20:19] <guestuser> How so? I'm looking at a hung installer that is stuck on a kernel event for a seek error on fd0.
[20:23] <guestuser> Am I missing something here?
[20:23] <benzrf> hey
[20:24] <benzrf> i'm trying to write a disk image to a usb drive, but the disk restoring tool doesn't prompt for my password and then complains with Not authorized to perform operation (udisks-error-quark, 4)
[20:25] <guestuser> benzrf: alt + f2 gksudo usb-creator-gtk
[20:25] <benzrf> usb-creator-gtk OK thank
[20:25] <benzrf> s
[20:25] <guestuser> use gksudo
[20:25] <benzrf> yeah
[20:25] <benzrf> i just didnt know the name of the program
[20:26] <guestuser> np
[20:26] <benzrf> i dislike ubuntu/gnome's genericization :-\
[20:26] <benzrf> i couldnt launch evince from the cmdline for the longest time because i had no idea it was called evince
[20:26] <cihan> squinty, EriC^^: Im back
[20:27] <benzrf> ugh
[20:27] <benzrf> org.freedesktop.DBus.Python.gi._glib.GError: Traceback (most recent call last):
[20:27] <benzrf>   File "/usr/lib/python3/dist-packages/dbus/service.py", line 707, in _message_cb
[20:27] <EriC^^> wb
[20:27] <benzrf>     retval = candidate_method(self, *args, **keywords)
[20:27] <benzrf>   File "/usr/share/usb-creator/usb-creator-helper", line 233, in Format
[20:27] <cihan> squinty, EriC^^: Now Im on Kubuntu 14.04
[20:27] <benzrf>     part.call_set_type_sync('0x0c', no_options, None)
[20:27] <unopaste> benzrf you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[20:27] <EriC^^> cihan: ok
[20:27] <guestuser> benzrf: don't paste in the chan. Its called spamming. Use fdisk to manually wipe the disk then try again.
[20:28] <cihan> EriC^^, so what s your suggestion?
[20:28] <guestuser> sudo umount /dev/sdX, sudo fdisk /dev/sdx, then "o" <-- letter, then "w"
[20:28] <guestuser> Then run the creator agian.
[20:29] <EriC^^> cihan: testdisk?
[20:29] <cihan> OK
[20:29] <cihan> EriC^^, let me try it again
[20:30] <benzrf> guestuser: http://i.imgur.com/uMDgf5g.png
[20:30] <cihan> EriC^^, shall I analyze again?
[20:30] <EriC^^> ok
[20:30] <guestuser> benzrf: See my above posts. Use fdisk to wipe the drive.
[20:30] <benzrf> i did
[20:30] <benzrf> >.<
[20:31] <guestuser> benzrf: Create a partition on it now.
[20:31] <benzrf> dev/sdb was not mounted ftr
[20:31] <benzrf> :|
[20:31] <guestuser> benzrf: sudo fdisk /dev/sdb, then n, p, enter, etner, t, b, w
[20:32] <guestuser> benzrf: Then re-run the creator.
[20:32] <benzrf> https://gist.github.com/b2dcba1659070f33318a
[20:32] <benzrf> ok
[20:33] <guestuser> benzrf: There might be a third enter in there where the other two are.
[20:33] <bubbasaures> benzrf, You need a msdos partition table, use gparted or the cli to format this than a fat32 partition.
[20:33] <benzrf> bubbasaures: ok
[20:33] <cihan> EriC^^, http://pastebin.com/EwfUPzvR
[20:33] <guestuser> Is that not what fdisk is doint? The t is for type the b is for MSDOS.
[20:34] <cihan> EriC^^: This is the output from quick search: http://pastebin.com/EwfUPzvR
[20:34] <cuddylier> Is it okay to uninstall lsof?
[20:34] <benzrf> /dev/sdb contains GPT signatures, indicating that it has a GPT table.  However, it does not have a valid fake msdos partition table, as it should.  Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables.  Or perhaps you deleted the GPT table, and are now using an msdos partition table.  Is this a GPT partition table?
[20:34] <Wryness> how can i increase the number of scrollback lines in a ubuntu terminal?
[20:34] <guestuser> Gparted
[20:34] <bubbasaures> guestuser, Yeah should, I forgot you had shown that command.
[20:34] <guestuser> benzrf: use gparted for GPT.
[20:34] <benzrf> guestuser: i'm in gparted
[20:34] <EriC^^> cihan: ok
[20:34] <benzrf> got that message
[20:35] <benzrf> Wryness: edit -> profile prefs -> scrolling
[20:35] <guestuser> benzrf: One sec.
[20:35] <cihan> EriC^^, I think squinty  was mentioning on smarttools or another tool; right? shall we check it as well?
[20:35] <EriC^^> cihan: try pressing q
[20:36] <EriC^^> then when you get to the intel menu
[20:36] <EriC^^> select gpt
[20:36] <T0by_> Does the root-partion also contain folders like /opt so I should increase it a bit from recommended settings found online if I want to install games and programs?
[20:36] <joshua__> can someone tell me how to get everything else but skype to output to my speakers..
[20:36] <cihan> EriC^^: EFI GPT parittion mmap?
[20:36] <T0by_> I'm thinking about downsizing my /home since it's mostly for media files and program specific settings right?
[20:36] <joshua__> everything is outputting to my headset and i cant figure out how to seperate them
[20:37] <EriC^^> cihan: yes
[20:38] <joshua__> anyone?
[20:38] <cihan> EriC^^: Nope it doesn't show more than that too :(
[20:38] <bubbasaures> T0by_, adjust as needed, be careful filling up partitions, if you have to worry about that a bigger HD might be useful.
[20:38] <guestuser> benzrf: Are you sure sdb is your usb?
[20:38] <EriC^^> even in the deep search?
[20:38] <T0by_> bubbasaures: But I'm right on the /opt and such folders being located in the root partition if so?
[20:39] <benzrf> guestuser: yep
[20:39] <T0by_> bubbasaures: I have a big drive, I just don't want to lowball my /root (500gb hdd)
[20:39] <guestuser> benzrf: run this as root (sudo -i first) then run this: echo -e "o\nn\np\n1\n\n\nt\nb\nw" | fdisk /dev/sdb && mkfs.vfat /dev/sdb1
[20:39] <benzrf> too late
[20:39] <guestuser> benzrf: If /dev/sdb is not your usb you will wipe whatever /dev/sdb is
[20:39] <benzrf> i pushed forward in gparted
[20:39] <benzrf> let's see
[20:39] <joshua__> so, nobody can tell me how to seperate them?
[20:39] <benzrf> ok sdb appears to be less broken :%_
[20:39] <benzrf> :^)
[20:39] <guestuser> joshua__: You need jackd.
[20:40] <guestuser> benzrf: Awesome.
[20:40] <bubbasaures> T0by_, Apps.....etc will put their stuff in different places at times,so adjust accordingly, you just have to to pay attention
[20:40] <bastidrazor> T0by_: i've never had a / bigger than 15GB. for years of upgrades.. never had an issue. /opt is located on /.
[20:40] <joshua__> jackd?
[20:40] <benzrf> aaaaaaaaaaah
[20:40] <guestuser> Google the things.
[20:40] <guestuser> benzrf: Did the things work?
[20:40] <OerHeks> !google
[20:40] <joshua__> yeah first things that showed up is porn :)
[20:40] <benzrf> it still says 0 free space and erase did this: https://gist.github.com/ac16e4ab053325a26366
[20:41]  * benzrf holds his head in his hands
[20:41] <cihan> EriC^^: Any idea?
[20:41] <guestuser> joshua__: https://help.ubuntu.com/community/HowToJACKConfiguration
[20:41] <excelsiora> help! just installed Ubuntu to a newly created partition for a friend, laptop has Windows 8.1, trying for dual boot, finished install, and it doesn't boot into grub, it bypasses it and goes straight to Windows, is there a bios setting we need to change?
[20:42] <joshua__> why do i need something so complicated...
[20:42] <joshua__> how hard is it for ubuntu to output skype to headphones and everything else to desktop...
[20:42] <guestuser> benzrf: Kill the creator. Run the command I posted above. Then try again. If that is no good then it might be your hardware. Are you you using a hub (like your front panel)? If so try a rear USB port.
[20:42] <joshua__> just looking at that picture and i ont even know what half of that is lol
[20:42] <cihan> squinty, hi squinty -- im with Kubuntu 14 now.. Do you have any suggestions?
[20:43] <guestuser> joshua__: Because (to my knowledge) there is no other way to split audio streams like that on an app by app basis.
[20:43] <bastidrazor> excelsiora: Dual boot instructions: x86/AMD64: https://help.ubuntu.com/community/DualBoot/Windows
[20:43] <bubbasaures> excelsiora, This a UEFI bios?
[20:44] <EriC^^> cihan: it's odd that it's not showing up
[20:44] <guestuser> joshua__: Essentially it takes in audio and redirects it based on specified criteria.
[20:44] <excelsiora> bubbasaures: I think so
[20:44] <Bashing-om> cuddylier: 'lsof' is a system tool - what is up that you even think about removing it ?
[20:44] <cihan> EriC^^: Unfortunately :(
[20:44] <benzrf> guestuser: we have burning =D
[20:44] <benzrf> thank u much
[20:44] <guestuser> NP
[20:44] <EriC^^> cihan: what exactly happened?
[20:44] <benzrf> have a nice afternoon
[20:44] <cuddylier> Bashing-om: It has spawned a lot of processes and won't kill when I try doing killall lsof
[20:44] <guestuser> You as well.
[20:44] <odsent> I like WoW, Halo, LotR, Lotro, Pokemon, Runescape, Star Wars, Minecraft, CoD, GTA, Skyrim, Garry's Mod, Ultima Online, Starcraft, GW2, League of Legends, Heroes of Newerth, Diablo III, Battlefield, MapleStory, and Flyff. I also know C++, C#, assembly, python, visual basic, and java.
[20:45] <squinty> guestuser:  http://fedoraproject.org/wiki/Common_kernel_problems#Boot_pauses_probing_floppy_device   might be worth a try
[20:45] <bubbasaures> excelsiora, Help in this area if a UEFI..etc is not as available here so hang tight. The ubuntu forum is a good option as well
[20:45] <guestuser> cuddylier: One does not simply kill lsof
[20:45] <cihan> EriC^^: I dont know how it happened but last night suddenly it started saying You need to format the drive to use it on my Win. I check with Linux and couldnt reach too. So I checked the forums and they were suggesting 'chkdsk /x' which worked fine for the error but now the drive seems empty :
[20:45] <cuddylier> guestuser: There is 400 lsof processes running causing my load to go to 200 for no reason
[20:46] <excelsiora> disable secure boot?
[20:46] <jost> How can I tell my Server to reboot at a given time, *and then log out*? Does it work if I execute `shutdown -r hh:mm &`, or is that process killed when I log off?
[20:46] <guestuser> cuddylier: Something is opening files.
[20:46] <excelsiora> enable legacy support?
[20:46] <guestuser> jost: use screen
[20:46] <cuddylier> guestuser: I did a command before that said the processes stemmed from cron but I have cron disabled.
[20:46] <Bashing-om> cuddylier: 'lsof' is List Open Files .. gives a list of the file that are open ...What you are looking for is "what process is locking up" as for example -> sudo lsof /var/lib/dpkg/lock .
[20:46] <cihan> EriC^^, any idea what the problem might be?
[20:47] <bubbasaures> excelsiora, legacy would be before you install if wanting it.
[20:47] <cihan> EriC^^, also I used Seagate recovery and it is able to show some of the files without full scanning. But I haven't tried the full scanning yet. However it is expensive for a student like me :(
[20:47] <guestuser> squinty: Trying it now.
[20:47] <cuddylier> Bashing-om: How do I see which program is?
[20:48] <bastidrazor> excelsiora: this may help https://help.ubuntu.com/community/UEFI
[20:48] <guestuser> cuddylier: What did you run when this started?
[20:48] <EriC^^> cihan: hold on
[20:48] <bubbasaures> excelsiora, Be careful in letting the emotion of this not working out of the box run wild guessing.
[20:48] <cuddylier> guestuser: Nothing manually, that's the thing.
[20:48] <cihan> EriC^^, sure, Im here
[20:48] <cuddylier> Otherwise I would have a very good idea what is causing the issue
[20:49] <guestuser> squinty: Still the same issue.
[20:49] <squinty> guestuser: :(
[20:50] <djeddi> helllllllllllllo evryone
[20:50] <CodeGos2> are there any alternatives to "BootRepair" tool for ubuntu, i have two drives with many partitions on each. after moving drives to other pc and fixing grub it wont show windows partition
[20:50] <guestuser> cuddylier: try running lsof and seeing whats open
[20:50] <cuddylier> guestuser: If I run 'lsof' the system hangs on SSH
[20:50] <excelsiora> does that mean we need to reinstall?
[20:51] <benzrf> oh no whaaaaaaaaaaaaaaat
[20:51] <JCT> is there a task manager equivilent for ubuntu?
[20:51] <benzrf> usb-creator-gtk said:
[20:51] <benzrf> echo -e "o\nn\np\n1\n\n\nt\nb\nw" | fdisk /dev/sdb && mkfs.vfat /dev/sdb1
[20:51] <djeddi> zébbbb
[20:51] <benzrf> er
[20:51] <JCT> equiv*?
[20:51] <benzrf> wrong paste
[20:51] <guestuser> lol
[20:51] <benzrf> wait nvm let me google it
[20:51] <JCT> i can't find one if there is
[20:51] <guestuser> cuddylier: This is remote?
[20:51] <squinty> JCT:  in terminal  top  or htop    in menu System Monitor
[20:51] <cuddylier> guestuser: Yeah but I can get KVM access too
[20:52] <guestuser> VPS?
[20:52] <cuddylier> No, it's a dedicated server
[20:52] <JCT> system monitor?
[20:52] <bubbasaures> JCT, In the terminal top or install htop and run it.
[20:53] <bubbasaures> JCT, What is the end goal use?
[20:53] <guestuser> JCT: alt + F2 gnome-system-monitor
[20:53] <JCT> it just says search a command
[20:53] <squinty> CodeGos2:  sudo update-grub doesn't show windows setup?   could also try   sudo os-prober
[20:53] <excelsiora> entering boot manager, looks like we can select ubuntu, but not sure if I just selected thumb-drive or hard drive install. I think hard-drive, because options not the same as thumbdrive was.
[20:53] <cihan> EriC^^: Anything?
[20:53] <JCT> ...
[20:53] <JCT> you mean a terminal?
[20:54] <JCT> i want to monitor my processes
[20:54] <guestuser> JCT: Press and hold ALT on your keyboard. Then press the F2 key. Then type gnome-system-monitor.
[20:54] <EriC^^> cihan: 1 sec
[20:54] <JCT> OH.
[20:54] <JCT> k
[20:54] <excelsiora> I guess we need to look for how to make this work more easily
[20:54] <squinty> JCT:  which desktop are you using?  you should find System Monitor in your main desktop menu or dash or whatever
[20:54] <excelsiora> ubuntu booted
[20:55] <guestuser> cuddylier: lsof should not log you out over ssh.
[20:55] <JCT> i got it
[20:55] <cihan> EriC^^: Sure thing, thanx a lot
[20:55] <JCT> thx
[20:55] <cuddylier> guestuser: I tried it on another box and it worked fine spamming all the open files, I have 20 boxes in the same exact setup spec wise and OS wise
[20:55] <EriC^^> cihan: searching
[20:55] <cuddylier> So it's not what I'm running on them I think
[20:55] <guestuser> Are you using cgi?
[20:55] <cuddylier> And hardware issues can't cause this?
[20:55] <guestuser> cuddylier: On the affected server?
[20:55] <guestuser> cuddylier: No.
[20:56] <cuddylier> I have apache installed but not using it, I tried stopping it before, no affect
[20:56] <bubbasaures> CodeGos2, The bootrepair tool has a key use, the bootinfo summary, if you have a up to date copy lets see it and detail the end goal.
[20:56] <guestuser> cuddylier: Is this a production box or for personal use?
[20:57] <cuddylier> guestuser: Production
[20:57] <rabrab> having an issue post-upgrade from 12.04 LTS to 14.04.1 LTS, grub-pc failed because linux-image dpkg errors, how do i get on the trusty kernel?
[20:58] <EriC^^> cihan: in windows, you used chkdsk /x or chkdsk c: /f ?
[20:58] <bubbasaures> rabrab, Try in 14.04in the terminal sudo apt-get -f install to see if anything needs finishing.
[20:59] <EriC^^> ( or where c: is your seagate drive )
[20:59] <cihan> EriC^^, i used chkdsk I: /x
[20:59] <guestuser> cuddylier: You might be able to find out what spawned the child processes and kill the parent.
[20:59] <bubbasaures> rabrab, Can't tellif you can boot in or not.
[20:59] <cuddylier> guestuser: when I try to do kill -9 it freezes SSH
[21:00] <guestuser> cuddylier: Not kill. Try ps -eo ppid to find the parent process.
[21:00] <mall> Hello, I am using xubuntu, and alt+tab works only with apps within the desktop I am actually working at, I'd like it to work for apps in any desktop, I am not sure if it is the right place to ask (I also asked at xubuntu channel) but would appreciate any directions, thank you!
[21:00] <rabrab> bubbasaures, im currently booted into the 3.2.0.69 kernel, i encounter errors in linux-image-3.13.0-37-generic and grub-pc
[21:00] <guestuser> Then kill the parent. The one with the most entries.
[21:00] <rabrab> bubbasaures, currently marked for removal because i was trying purge then install
[21:01] <EriC^^> cihan: go back to testdisk then intel
[21:01] <EriC^^> then deeper search
[21:01] <cihan> OK EriC^^ let me try
[21:02] <OerHeks> after windows chkdsk it would be useless to perform testdisk AFAIK
[21:02] <cihan> EriC^^, OK I m doing it but it will take a long time it seems
[21:02] <dracnoc> rabrab: do you have something weird/custom in your grub file?
[21:02] <EriC^^> cihan: let it run for a minute
[21:02] <EriC^^> what partitions are showing?
[21:02] <cihan> OerHeks, oohhhh :/ What shall we do? Do you have any suggestions?
[21:02] <bubbasaures> rabrab, Could it be the kernel upgrades just did not finish?What does a apt-get update and apt-get dist-upgrade and or an apt-get -f install show
[21:03] <OerHeks> cihan, nope, your data is gone i think
[21:03] <rabrab> dracnoc, some colour adjustments and i didnt like --quiet in normal boot, i think i modified it long ago
[21:03] <cihan> OerHeks, that sucks awfully -- all my data was there :( Any idea how to retrieve the data back?
[21:04] <EriC^^> cihan: yeah can get it back most likely
[21:04] <EriC^^> is anything showing up in testdisk?
[21:04] <guestuser> cihan: Did you format or jsut delete the partition?
[21:04] <cihan> EriC^^: Thanks a lot
[21:04] <OerHeks> cihan, why ask again and again?
[21:04] <Rhapsody> Can someone PM me with help on how to set up an FTP server on my Ubuntu machine from the start, with username/password protection and all? All the tutorials I've found are a bit hard to follow for someone like me. I'm asking for PM since I know how fast this channel can move and your messages might be lost
[21:04] <cihan> EriC^^, it s still searching -- 1%
[21:04] <dracnoc> rabrab: grub updates/upgrades fail usually because of custom lines in the config file. You might want to comment out anything you added and try again using "sudo dpkg --configure -a"
[21:04] <rabrab> bubbasaures, apt-get -f install has 2 packages to remove linux-image-3.13.0.37-generic and linux-image-extras-3.13.0-37-generic ; 3 not fully upgraded
[21:05] <Ben64> !pm | Rhapsody
[21:05]  * Ben64 pokes ubottu 
[21:05] <cihan> guestuser, I dont know what I did. I just did chkdsk since it was giving format disk error and then the drive seems all empty
[21:05] <EriC^^> cihan: it shouldn't take that long..
[21:05] <rabrab> dracnoc, while file controls the colours of the grub boot menu again? i think it moved in grub2
[21:05] <cuddylier> guestuser: Connected up KVM and I typed 'lsof' and it's just sitting there hanging
[21:05] <Ben64> Rhapsody: we don't do PM in this channel, but you should use sftp instead of ftp
[21:05] <guestuser> cihan: It sounds like a mechanical failure.
[21:05] <cihan> EriC^^: Analyse cylinder  1715/121600: 01%
[21:05] <EriC^^> OerHeks: any idea what chkdsk /x vs. chkdsk /f is?
[21:05] <rabrab> dracnoc, i think i edited /etc/default/grub
[21:06] <Rhapsody> Ben64: I'll look up SFTP tutorials then, thanks
[21:06] <Ben64> Rhapsody: really no tutorial necessary, if ssh works, sftp works
[21:06] <guestuser> cuddylier: You might be forced to do some unscheduled maintenance.
[21:06] <bubbasaures> rabrab, I think you just started your own fix in a blind way is all. the 3 not fully upgraded is what?
[21:07] <excelsiora> ok, gave my friend a way to get into Linux
[21:07] <cuddylier> guestuser: What sort of maintenance do you suggest? I cannot think of anything to do even if it means taking it offline.
[21:07] <Rhapsody> Ben64: Do I just use my SSH info as SFTP info?
[21:07] <excelsiora> so we're done!!
[21:07] <dracnoc> rabrab: /etc/default/grub
[21:07] <Ben64> Rhapsody: yep
[21:07] <Rhapsody> Fair enough, thanks Ben64
[21:07] <guestuser> cuddylier: Something is opening a lot of files.
[21:07] <dracnoc> rabrab: remember to "sudo update-grub" if you make any changes
[21:07] <cihan> EriC^^: Am I doing something wrong?
[21:07] <CodeGos2> my windows is on /dev/sdb5, here is my bootinfo summanry http://paste.ubuntu.com/8502772/, any way i can force grub to see windows 7 on /dev/sdb5
[21:07] <cuddylier> guestuser: After a reboot it's fine then as soon as it starts again, lsof breaks
[21:07] <Ben64> cihan: have you looked here? https://help.ubuntu.com/community/DataRecovery
[21:07] <EriC^^> cihan: i dont think so
[21:07] <cuddylier> Even if the load is maybe 10 and not 200, lsof doesn't work again
[21:08] <guestuser> cuddylier: If it is a zombie process that is spawning then you need to reboot to kill it.
[21:08] <EriC^^> cihan: this is a huge site i found http://html5.litten.com/how-to-fix-external-disk-drive-suddenly-became-raw/
[21:08] <cuddylier> guestuser: It comes back after 1-2 hours though
[21:08] <cuddylier> And the same cycle happens again and again
[21:08] <rabrab> bubbasaures, not sure i know what you are asking, i know i need to mark them for install instead of remove/purge
[21:08] <guestuser> cuddylier: lsof isn't broken. Something is spawning it.
[21:08] <EriC^^> i'm checking the comments, first person commenting has a seagate too
[21:08] <cuddylier> guestuser: Yeah, is there any other commands to check that may work?
[21:08] <guestuser> cuddylier: What do you have running on the machine?
[21:08] <guestuser> The one I posted: ps -eo ppid
[21:08] <bubbasaures> CodeGos2, Windows wont boot from a extended partition unless you have a boot partition in a primary. Not showing not sure.
[21:08] <cihan> EriC^^: Thanks let me check too
[21:09] <guestuser> Look for the one with the most entries.
[21:09] <cuddylier> guestuser: Only java processes but 1400 of the 1500 processes are ran by root, all the java processes are run by other users.
[21:09] <bubbasaures> CodeGos2, Not showing you mean in the grub menu?
[21:09] <guestuser> cuddylier: What does ps -aux show?
[21:10] <EriC^^> cihan: do you have partedmagic?
[21:10] <rabrab> bubbasaures, grub-pc is partial install
[21:10] <cuddylier> guestuser: A lot of processes, let me extend my scrollback
[21:10] <cihan> EriC^^: Let me install
[21:10] <guestuser> cuddylier: If you are using putty turn on logging as well.
[21:11] <cuddylier> guestuser: Yeah I am
[21:11] <EriC^^> cihan: ok
[21:11] <rabrab> bubbasaures, dracnoc, http://paste.ubuntu.com/8502830/
[21:11] <guestuser> cihan: Did you try running a utility to scan for bad sectors?
[21:11] <guestuser> cihan: To see if it is a mechanical fault
[21:11] <bubbasaures> CodeGos2, Honestly that is a huge mess, you would have to at the least be able to outline the whole shebang.
[21:12] <cuddylier> guestuser: It freezes half way through showing the process list :S
[21:12] <guestuser> cuddylier: Then there is a zombie in there somewhere.
[21:12] <cuddylier> 2nd from bottom:
[21:12] <cuddylier> root     11223  0.0  0.0  59640  1488 ?        S    03:39   0:00 CRON
[21:12] <cihan> guestuser: I tried Seagate diagnostics and it showed that the hdd is fine no bad sectors
[21:13] <cuddylier> Killing cron does nothing too
[21:13] <guestuser> cihan: What format was the partition? HAve you imaged the drive yet?
[21:13] <guestuser> cuddylier: It's not cron. Crom may have been the parent though.
[21:13] <cihan> guestuser, Unfortuantely it was ntfs since I m also using win on my laptop
[21:13] <cuddylier> guestuser: Any idea on how to find out?
[21:14] <cihan> Eric: Let me create a bootable USB from it -- I have downloaded it nwo
[21:14] <guestuser> cuddylier: Not if you can't list the processes.
[21:14] <guestuser> cuddylier: How fast does it spawn? Do your users have root?
[21:14] <cuddylier>  pstree 1415
[21:14] <cuddylier> cronâââshâââsessioncleanââ¬âawk
[21:14] <cuddylier>                          ââlsofâââlsof
[21:14] <cuddylier>                          ââxargs
[21:14] <cuddylier> No my users do not.
[21:15] <cuddylier> No one but me has access
[21:15] <unopaste> cuddylier you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[21:15] <boriseto> Is there a way to make Ubuntu lock itself 1 minute after start up?
[21:15] <cihan> EriC^^, Shall I stop testdisk?
[21:16] <EriC^^> cihan: yes
[21:16] <guestuser> cihan: You really should not be working with the hard drive.
[21:16] <guestuser> cihan: Do you have a spare drive larger than the one you are working on?
[21:16] <cihan> guestuser, Unfrotunately not now
[21:16] <dracnoc> sudo apt-get install --reinstall linux-image-3.13.0-37-generic
[21:16] <cuddylier> guestuser: Is that cronsessionclean?
[21:16] <dracnoc> rabrab: ^
[21:17] <dracnoc> read up a couple of lines
[21:17] <cihan> guestuser, but i have close to it -- there are some data i can skip such as music or video if needed
[21:17] <rabrab> dracnoc, new one on me http://paste.ubuntu.com/8502869/
[21:17] <guestuser> cuddylier: try to install iotop
[21:18] <cuddylier> guestuser: Got it already, IOwait time is only 0.1 and what do you want me to tell you from iotop?
[21:18] <guestuser> cihan: Everything you do with the drive risks the loss of more data. You need to dump the drive to an image file and analyze the image.
[21:18] <cuddylier> Highest IO % in iotop is 10%
[21:18] <guestuser> cuddylier: What is your disk read / disk write at
[21:18] <cuddylier> 3.26MB write and 2.62MB read
[21:18] <cuddylier> keeps going down to 500KB
[21:19] <guestuser> cuddylier: what process is causing it to rise and fall?
[21:19] <cihan> guestuser, I see your point -- I ll go and buy a new one then. Any suggestions for a brand?
[21:19] <EriC^^> guestuser: can't cihan write the image to her hard disk?
[21:19] <cuddylier> guestuser: Most likely the Minecraft server processes however with them all stopped, no difference in the situation.
[21:19] <guestuser> cihan: Does not matter. Consumer is consumer.
[21:19] <dracnoc> rabrab: sudo dpkg --configure -a
[21:20] <EriC^^> guestuser: as in the hard disk she normally uses
[21:20] <EriC^^> *he/she
[21:20] <rabrab> dracnoc, http://paste.ubuntu.com/8502889/
[21:20] <guestuser> EriC^^: Write the image to the hard disk?
[21:21] <EriC^^> yeah like if=bla.iso
[21:21] <EriC^^> sorry of=bla.iso
[21:21] <squinty> rabolio_:  only showing -36 in repo's here and my 14.04.1 is up to date
[21:21] <guestuser> EriC^^: She needs to do the opposite i.e. dd if=/dev/sda of=/home/$USER/temp.img
[21:21] <EriC^^> yeah i know, i meant of=bla.iso
[21:22] <guestuser> EriC^^: Yup. Then try to recover data from the image.
[21:22] <EriC^^> so it's doable?
[21:22] <EriC^^> ok
[21:22] <cihan> guestuser, let me try to find a drive first then before trying partedmagic
[21:22] <EriC^^> cihan: is the hard disk you usually use larger than the seagate one?
[21:22] <guestuser> EriC^^: Maybe. If the destination has enough free space and if it is not a mechanical failure.
[21:22] <Serraphyn> I am about to install ubuntu on a new machine I got that has windows 8.1 on it.  Is there any way I can do a full mirror of my current drive? I have an external hard drive with plenty of space to store the entire drive(all partitions on)  any help?
[21:23] <dracnoc> rabrab: try "sudo dpkg --configure -a" again for me
[21:23] <guestuser> cuddylier: Are you sure lsof is causing your usage spikes?
[21:23] <reisio> Serraphyn: yup
[21:24] <cuddylier> guestuser: Not 100% no, just see 300-400 lsof processes and 0 on all my other boxes and made the assumption
[21:24] <reisio> Serraphyn: but if you have a rescue/reinstall partition, it's simpler to just copy that, which would give you the ability to restore Windows
[21:24] <cuddylier> As my other boxes have 250 processes and this one has 1600
[21:24] <cuddylier> 250 processes is the normalish
[21:24] <guestuser> cuddylier: what does htop show
[21:24] <cuddylier> guestuser: Can't use htop, black screen when used.
[21:24] <cuddylier> Due to the load.
[21:25] <Serraphyn> reisio: I was hoping to make a mirror of the drive so I don't have to spend 12+ hours of updates if I go back to windows 8.1  If you do a system restore image only it reset you to windows 8.0 and then you have to spend a full day of updates to get back to useable
[21:25] <cihan> Eric: they r both 1TB -- I m trying to find another drive which is at least 1TB
[21:25] <daftykins> Serraphyn: look into clonezilla
[21:25] <reisio> Serraphyn: how big is the windows drive?
[21:26] <guestuser> cuddylier: what about top?
[21:26] <rabrab> dracnoc, tried a kernel one security version ago just to make sure it wasnt my mirror or something so you'll see -36, http://paste.ubuntu.com/8502918/
[21:26] <cuddylier> guestuser: http://puu.sh/c0O8Y/1d93685929.png
[21:26] <Serraphyn> reisio: its only 250GB(SSD) an dI have 2 externel 3TB drives I can back up too
[21:26] <rabrab> dracnoc, also im not booting from that md device you see warnings about...
[21:26] <reisio> Serraphyn: k
[21:26] <guestuser> cuddylier: 186 zombie processes
[21:26] <cuddylier> guestuser: Yes
[21:27] <decadence18> Hey I have a LM17 issue but excluding one persion everyone on there is not helpful so... Is it possible I could obtain help from someone here?
[21:27] <reisio> Serraphyn: I find large backups of mixed random-state OS data and personal data awful, but if you really want to, I suggest backing up any boot loader stuff with dd, any rescue/reinstall partition with dd, the partition layout with sfdisk/sgdisk, and any other FSes (partitions) with ntfsclone
[21:28] <xangua> !mint | decadence18
[21:28] <squinty> decadence18: lm is off topic for here.  might want to check the mint forums if no help in spotchat lm channel
[21:28] <cuddylier> guestuser: What can I do with those zombie processes?
[21:28] <reisio> Serraphyn: I mean do you really think you're going to be restoring this backup in less time than it'll take Microsoft to crank out enough updates to need a day's worth of updating?
[21:28] <xangua> great bot died
[21:28] <dracnoc> rabrab: that's one hell of a mess you've got there ... can you get Synaptic running on that box? It has a "Fix Broken Packages" option which has helped me a couple of times
[21:28] <Serraphyn> ah nvm, I have the windows 8.0 DVD I can make tha work if I have to I guess... It probably will be the same amount of time on either end
[21:28] <rabrab> dracnoc, yes i can fire up synaptic
[21:28] <cuddylier> guestuser: I did ps aux | grep 'Z' and they all say [lsof] <defunct>
[21:28] <Serraphyn> Is 14.10 out yet?
[21:29] <decadence18> I've tried the mint help channel but they aren't being useful whatsoever.
[21:29] <guestuser> cuddylier: That means something died without killing the children.
[21:29] <squinty> Serraphyn:  /join #ubuntu+1
[21:29] <Serraphyn> squinty: I was just asking if it was out yet or not, I don't need to join another channel if its not stable yet then juyst say so.
[21:29] <jeremy31> decadence18: what is the issue?
[21:30] <decadence18>  After a messed up line in the terminal I deleted the /tmp directory. It wouldn't let me log in so I had to delete the .Xauthority file, the /.cache/dconf directory, and change the permissions on the /tmp directory. Now when I log in (LM17 Cinnamon) it displays a notification saying "Cinnamon running in software rendering mode".
[21:30] <squinty> Serraphyn:  off topic for this channel. please do not be rude
[21:30] <rabrab> dracnoc, fix broken packages didnt seem to do much, nothing new to apply
[21:30] <cihan> EriC^^: I think I have on computer with 1TB disk size -- I can format it and use it. Would it work?
[21:30] <guestuser> cuddylier: try this on a defunct process: cat /proc/{defunct process id}/status | grep -i ppid
[21:30] <rabrab> dracnoc, how do i restore the package maintainers version of /etc/default/grub just in case thats it
[21:30] <guestuser> cuddylier: You should get the parent process id.
[21:31] <cihan> EriC^^, guestuser: Or do you suggest me to go and buy a new one?
[21:31] <decadence18> jeremy31 that was at you. Sorry I keep getting distracted and forgetting to put peoples name
[21:31] <Serraphyn> How is asking if the newest version out is released? if its not just say no, not like I'm holding a gun to your head for a response.  and I wasn't being rude, you seemed to have gone out of your way to be the rude one.
[21:31] <jeremy31> decadence18: post this question at forums.linuxmint.com and you should get some help and it is easier to keep on track than with IRC
[21:33] <decadence18> I may have to do that... I'd have to make an account unfortunately
[21:34] <dracnoc> rabrab: you normally do that by installing grub-pc, which of course is one of the things that is failing ... but you might be luck "sudo apt-get install --reinstall grub-pc"
[21:34] <cuddylier> guestuser: PPid:   10043
[21:34] <cuddylier> How do I see the process name?
[21:34] <jeremy31> decadence18: I am member JeremyB there and quite a few more that can help
[21:35] <arooni-mobile> whats the best ebook reacher for ubuntu?
[21:35] <cuddylier> I did pidof 10043 and it froze ssh so I guess not that
[21:35] <EriC^^> cihan: depends how urgent everything is
[21:35] <EriC^^> cihan: you'd ultimately need another hdd to put the data on i guess
[21:35] <dracnoc> arooni-mobile: install calibre, it comes with a tidy ebook reader and conversion tool
[21:35] <guestuser> cuddylier: cuddylier ls -l /proc/{PID}/exe
[21:35] <guestuser> cuddylier: I think.
[21:36] <OerHeks> !info calibre
[21:36] <cuddylier> ls: cannot read symbolic link /proc/10046/exe: No such file or directory
[21:36] <cuddylier> lrwxrwxrwx 1 root root 0 Oct  5 21:09 /proc/10046/exe
[21:36] <EriC^^> also if you do end up using it, look into how parted magic is installed before removing windows
[21:36] <guestuser> cuddylier: Dope! I should have known that wouldn't work because the process is dead. Hence the zombie.
[21:36] <EriC^^> ( i'm assuming you'll be doing everything from a live usb )
[21:36] <cihan> EriC^^: I need some of the data as soon as possible. I have another computer which I can format or I can use a Live CD and with that I can take an image of my external to the computer hdd -- does that make sense?
[21:37] <guestuser> cihan: No need to format.
[21:37] <skinux_> When I try logging into Ubuntu, login dialog disappears, leaving me with only blue background and pointer. How can I fix this?
[21:37] <potatowedge> How do I pipe to 'less' but start from the bottom of a file?
[21:37] <guestuser> Is the hdd on that computer larger? cihan
[21:37] <cihan> they r both 1 TB
[21:37] <guestuser> cihan: You need a larger drive. Or do it in chunks.
[21:38] <guestuser> But you may lose files based on that. cihan
[21:38] <cihan> guestuser -- let me check it a bit more than
[21:38] <guestuser> cihan: How much free space on the working drive?
[21:38] <EriC^^> guestuser: are you absolutely sure about this?
[21:38] <guestuser> EriC^^: I'm absolutely sure cihan should not be working on the disk itself.
[21:38] <reisio> potatowedge: eh?
[21:38] <EriC^^> yes i agree
[21:39] <Ben64> if only the filesystem is damaged then it is fine
[21:39] <guestuser> EriC^^: Then cihan needs to work from something else.
[21:39] <EriC^^> but are you absolutely sure she needs a larger drive to dd the image?
[21:39] <guestuser> EriC^^: By dumping the drive to an image.
[21:39] <guestuser> EriC^^: Yes.
[21:39] <cihan> EriC^^, guestuser: My comp has 1Tb but I m using some. I found another computer which I can format completley and use a live cd for image.
[21:39] <guestuser> EriC^^: We have to dump the entire drive because ntfs still frags.
[21:40] <EriC^^> guestuser: she would be cloning the drive
[21:40] <guestuser> cihan: The other computer; how much free space.
[21:40] <EriC^^> doh.
[21:40] <cihan> guestuser, it is also 1TB
[21:40] <guestuser> EriC^^: Yes and no. Not clone from one drive to another but clone to an image.
[21:40] <guestuser> cuddylier: Still working on it.
[21:40] <cihan> im checking if i have any other computers with a good disk
[21:40] <Bashing-om> cuddylier: Maybe, to find the PID name -> ps auxw|grep 10043 , ??
[21:40] <Ben64> use testdisk and/or photorec and recover files to the 2nd drive
[21:40] <Ben64> unless the first disk is physically damaged, theres no point in making a copy
[21:40] <EriC^^> guestuser: why are you going in circles here
[21:40] <cuddylier> guestuser: http://pastie.org/private/ketitkmzfgbdcheoy2buq
[21:40] <guestuser> cuddylier: You may need to write a script to parse all of the zombies and find their pid and then try to force kill them.
[21:41] <quey> hello, how to fix this : 200 = 0,01a+0,02b+0,05c+0,1d+0,2e+0,5f+1g+2h   ,     a,b,c,d,e,f,g    in  Natural numbers with 0.
[21:41] <Hulio> guestuser, you just fix it
[21:41] <guestuser> cuddylier: If lsof spawned the zombie what spawned lsof?
[21:41] <EriC^^> Ben64: thanks
[21:41] <guestuser> Hulio: ?
[21:42] <EriC^^> cihan: if you're sure the drive isn't damaged, there's no need to copy it
[21:42] <cuddylier> guestuser: Look at the 4th line, /var/lib/php5
[21:42] <Hulio> guestuser, wrong person
[21:42] <reisio> potatowedge: I guess you could use +F
[21:42] <Hulio> guestuser, it's all my fault
[21:42] <Hulio> guestuser, blame on me.
[21:42] <guestuser> Hulio: lulz
[21:42] <guestuser> cuddylier: Are you using any cgi?
[21:43] <mattwj2002> hi guys I could use some ubuntu help
[21:43] <cuddylier> guestuser: I have default apache with php installed but it wasn't being used for much at all
[21:43] <cihan> EriC^^, Seagate told me that there is no bad sectors
[21:43] <mattwj2002> I am working on a compaq cq58 and I can't get it to load ubuntu :(
[21:43] <guestuser> Ben64: What else causes a random loss of a partition?
[21:43] <mattwj2002> I enabled legacy devices in the bios
[21:43] <votz> When attempting to update Intel's graphics drivers with Intel's Graphics Installer, I'm presented with this error message: i915-3.15-3.13-dkms: Depends: linux-headers but it is a virtual package. What does that error message mean?
[21:43] <EriC^^> cihan: what did the smart test say?
[21:43] <guestuser> Which is why I asked what cihan was doing when this started.
[21:43] <votz> From Googling, others have run into this: http://askubuntu.com/questions/528667/error-updating-intel-drivers. But no solution was posted.
[21:44] <cihan> EriC^^, guestuser: Assuming Seagate diagnosis is correct, what shall I do? It said everything seems ok with the drive
[21:44] <X1> hey guys, i have the know mount of cryptswap problem, no swap mounted at startup, does anyone has the fixation of that? link etc.? found thousands of threats, but nothing really helped..
[21:44] <Ben64> guestuser: windows?
[21:44] <guestuser> cihan: I would start with a real drive diagnostics. Like HDAT or something similar.
[21:45] <guestuser> cihan: To remove mechanical failure as an option.
[21:45] <guestuser> cihan: Then I would dump to an image to prevent file operations from overwriting data. Windows has a bad habit of doing that on what it thinks is an "unformatted" drive.
[21:45] <guestuser> cihan: Then I would analyze the image and try to recover what I can.
[21:45] <cihan> guestuser, Im almost sure that there is no mechanical failures -- both chkdsk and seagate diagnosis showed no bad sectors -- but if u suggest any methods im fine doing it. please let me know.
[21:46] <guestuser> cihan: Does it recognize the partition table?
[21:46] <mattwj2002> anyone?
[21:46] <mattwj2002> :-s
[21:46] <guestuser> mattwj2002: What error?
[21:46] <cihan> guestuser, im not sure about it -- how can i check it?
[21:46] <guestuser> mattwj2002: AMD?
[21:47] <EriC^^> cihan: are you in the liveusb now?
[21:47] <cihan> no on kubuntu 14
[21:47] <guestuser> mattwj2002: If yes then try (at boot) F6 then up down to select acpi=off and noapic
[21:47] <EriC^^> ok is the ext hdd attached
[21:47] <mattwj2002> I can't boot off of my thumb drive on my mom's computer
[21:47] <EriC^^> ?
[21:47] <guestuser> mattwj2002: Use space to select.
[21:47] <mattwj2002> I used pendrive
[21:47] <mattwj2002> :(
[21:47] <guestuser> mattwj2002: Does it boot at all? i.e. The ubuntu splash screen?
[21:48] <X1> anyone?
[21:48] <mattwj2002> nope
[21:48] <cihan> EriC^^, Shall I create a liveCD?
[21:48] <mattwj2002> I am trying to fix my mom's computer using ubuntu
[21:48] <EriC^^> only attach the ext hdd
[21:48] <guestuser> mattwj2002: Does it boot at all?
[21:48] <EriC^^> plug it in
[21:48] <mattwj2002> but it keeps on rebooting with the thumb drive........
[21:48] <mattwj2002> in
[21:48] <guestuser> cuddylier: I missed your response. Any cgi on that rig?
[21:48] <mattwj2002> it kind of does but very slowly
[21:49] <cuddylier> guestuser: I just have default apache and php installed, so not sure if cgi is in the default php or not
[21:49] <X1> does anyone have a solution of the cryptswap error?
[21:49] <cuddylier> php is a CGI isn't it
[21:49] <guestuser> cuddylier: Look in the directories for the sites. i.e. /var/www or /opt/www w/e.
[21:50] <guestuser> X1: what error?
[21:50] <guestuser> X1: I missed it; sorry.
[21:50] <X1> guestuser: no problem, it is the known problem by startup, no cryptswap is mounted..
[21:50] <guestuser> cuddylier: CGI is (essentially) running shell scripts through a web interface.
[21:51] <cuddylier> guestuser: There is just the default index.html and then an uptime script that is queried with different data
[21:51] <cuddylier> but it is on every box and doesn't touch lsof as far as I know as it just reads e.g. load
[21:51] <X1> guestuser: there are many thearts in the internet which deal with that bug, but nothing helped..
[21:51] <X1> threats
[21:51] <guestuser> cuddylier: pastebin the script.
[21:51] <guestuser> cuddylier: and the contents of index
[21:52] <blocky> neither startup usb creator nor unetbootin is recognizing my flash drive, even though it's mounted and i can view the files
[21:52] <childhood> Hello all, we're trying to install ubuntu on a Dell computer that runs Windows XP. Booting from a usb we get to the boot menu and selected test without installing, but then it sotps part way through saying "Can not mount /dev/loop1 on /cow. Any suggestions?
[21:53] <X1> guestuser: maybe you have a solution for that, a link or sth.
[21:53] <Eagleman> How is the root account disabled in ubuntu, is it locked?
[21:53] <cuddylier> guestuser: index.html: http://pastie.org/pastes/9623403/text?key=ozgggmslqsf35knq7dqhq
[21:53] <guestuser> X1: not sure. Assuming you are using an encrypted swap partition?
[21:53] <cayo> Hi there. i have a geforce 525M nvidia card on a linux ubuntu 14.04. On nvidia website they say that geforce 525M supports opengl 4.0 but even installing bumblebee and nvidia 331.20 driver version  i can't execute programs with opengl 4.x. Anyone help me?
[21:53] <daftykins> childhood: do you know what specification it is? full on ubuntu might be a mistake from the start
[21:53] <cuddylier> guestuser: uptime.php http://pastie.org/pastes/9623405/text?key=f5yb9j4zhrqnyc9bualoq
[21:54] <daftykins> childhood: sounds like your USB flash drive wasn't made right / download wasn't good though
[21:54] <Ben64> Eagleman: sort of, just use sudo when you need root powers temporarily
[21:54] <X1> guestuser: it is exactly this problem: http://askubuntu.com/questions/91292/is-my-swap-cryptswap-partition-working-properly
[21:54] <Eagleman> Ben64 that was not the question
[21:54] <dracnoc> childhood: http://askubuntu.com/questions/215589/cannot-mount-dev-loop1-on-cow
[21:54] <childhood> daftykins:  Do you mean RAM and so on?
[21:54] <X1> guestuser: but that didnt help for me, thats why i am asking here, and yes i have an encrypted swap part.
[21:54] <Ben64> Eagleman: but it is the answer
[21:54] <daftykins> childhood: indeed
[21:55] <Eagleman> Ben64 nor was it the intent of the question. I am simply trying to figure out how the root account is disabled
[21:55] <guestuser> X1: Not sure. I always had issues with auto setup on encrypted partitions.
[21:55] <X1> guestuser: you know, who or what can help me? or should i do it manually after the installation? would that be better?
[21:55] <Ben64> Eagleman: it has no password
[21:56] <guestuser> X1: I do it manually with a script that is called by .bashrc
[21:56] <Eagleman> Ben64 i just read on the wiki that it is locked (if its still up to date).
[21:56] <X1> guestuser: i am curious why they don't solve the problem, it's happens over the years, i found threats of it between 2010 and 14
[21:56] <guestuser> cuddylier: Is one of your users refreshing this page a lot?
[21:56] <guestuser> cuddylier: The uptime one.
[21:56] <X1> guestuser: can you give me maybe an link for that with the installation-guide? would be nice ; )
[21:57] <childhood> daftykins: Well, even if the RAM is low, should it not still boot? Perhaps it would be slow, but it won't even start...
[21:57] <Bashing-om> !sudo | Eagleman
[21:58] <Eagleman> Bashing-om nice, i never asked a question about sudo did i?
[21:58] <daftykins> childhood: depends how bad we're talking, you want 1GB+ really, to boot a full live session
[21:59] <Bashing-om> !sudoer | Eagleman // Lemme try again.
[21:59] <decadence18> @Jeremy31 (I think) I added a new topic for it under Cinnamon but it hasn't shown up yet
[21:59] <Eagleman> Bashing-om why are you giving me that information?
[22:00] <childhood> daftykins: It has 4GB RAM,  2.80 GHz CPU. This should be fine, no?
[22:00] <guestuser> childhood: Yes it's fine. It's your USB drive.
[22:00] <guestuser> childhood: Use a different USB drive.
[22:00] <guestuser> childhood: Did you try it on a different computer?
[22:01] <Bashing-om> Eagleman: You asked about "why the toot account is locked" .. Right off hand I do not know the link to explain it, but the bot has it // if I can get the correct call .
[22:01] <childhood> guestuser: Would a reformat work?
[22:01] <Bashing-om> toot/root*
[22:01] <guestuser> childhood: Probably not.
[22:01] <Eagleman> Bashing-om no i did not ask why, i asked how
[22:01] <guestuser> Eagleman: I missed your question; do you mind re-asking it.
[22:01] <cayo> Hi there. i have a geforce 525M nvidia card on a linux ubuntu 14.04. On nvidia website they say that geforce 525M supports opengl 4.0 but even installing bumblebee and nvidia 331.20 driver version  i can't execute programs with opengl 4.x. Anyone help me?
[22:01] <daftykins> childhood: ah plenty for full ubuntu then yep, i'd remake the drive or try another as suggested
[22:02] <EriC^^> guestuser: meet Eagleman , Eagleman meet guestuser
[22:02] <EriC^^> childhood: are you cihan?
[22:02] <cihan> EriC^^, sorry I was looking for a harddrive -- what did I miss?
[22:02] <childhood> guestuser: thank you so much
[22:02] <Eagleman> I love this channel, you dont have to think, people think for you xD
[22:02] <guestuser> childhood: np
[22:03] <Bashing-om> Eagleman: Found it ! https://help.ubuntu.com/community/RootSudo <- <-By default, the Root account password is locked in Ubuntu.
[22:03] <guestuser> Hey udeb finally timed out
[22:03] <childhood> guestuser: I will remake the drive and try again, and if doesn't work we'll go grab another usb
[22:03] <guestuser> childhood: Sounds like a plan.
[22:03] <childhood> guestuser: btw this is my first time on IRC in about 15 years
[22:03] <childhood> guestuser: I feel young again
[22:04] <Eagleman> Bashing-om nice, but if you read what i said: [23:56:45] i just read on the wiki that it is locked (if its still up to date).
[22:04] <guestuser> childhood: lmao. I still troll a lot.
[22:04] <Ben64> Eagleman: so what else are you wanting to know
[22:05] <Eagleman> I want people to stop nick alerting me ;)
[22:05] <cihan> EriC^^, sorry I was looking for a harddrive -- what did I miss?
[22:05] <EriC^^> cihan: nothing, i thought you were childhood
[22:06] <cihan> EriC^^, ohh no :) I m still trying to find a harddrive :(
[22:08] <EriC^^> cihan: i saw some one comment and say that testdisk didn't see the partitions but mounting it did
[22:08] <EriC^^> cihan: if you want try to plug in the ext hdd, and type sudo parted -l to see the partitions
[22:09] <guestuser> Stupid partitioner :(
[22:09] <cihan> EriC^^, Im not sure if it will see since it shows one empty whole partition already
[22:09] <guestuser> Starting up the partitioner..... Back in the fd0 loop.
[22:10] <guestuser> Looks like udeb will time out after an hour or so though so thats good news......
[22:10] <daftykins> guestuser: did you disable the controller in BIOS yet?
[22:10] <guestuser> daftykins: no controller on the mobo
[22:10] <daftykins> is there not? how odd
[22:10] <guestuser> I know.
[22:10] <EriC^^> guestuser: i missed the early comments cihan wrote
[22:10] <guestuser> EriC^^: which ones?
[22:11] <EriC^^> where she used parted -l to try to list the partitions
[22:11] <EriC^^> unless she didnt so
[22:11] <guestuser> EriC^^: I thought the table was gone?
[22:11] <EriC^^> in which case you'd be a bigger jackass than i thought
[22:11] <EriC^^> ( with all due respect )
[22:11] <guestuser> EriC^^: How so?
[22:12] <EriC^^> i dont feel like playing your games
[22:12] <guestuser> EriC^^: What games?
[22:12] <EriC^^> break;
[22:12] <EriC^^> go watch loony tunes or something
[22:12] <guestuser> After all this my raid card is not recognized :(
[22:13] <EriC^^> at least you were right about trolling sometimes
[22:13] <guestuser> EriC^^: What are you talking about?
[22:13] <guestuser> EriC^^: If you look at any article about data recovery the first rule is to never work on the drive itself.
[22:14] <guestuser> EriC^^: Which is exactly what I recommended.
[22:14] <EriC^^> if you noted what she said, the drive isn't physically damaged
[22:14] <guestuser> EriC^^: How much do you know about hard drives?
[22:15] <guestuser> EriC^^: Or how they work?
[22:15] <EriC^^> again i dont feel like bickering
[22:15] <guestuser> EriC^^: Even if it isn't physically or mechanically damaged there is potential for data loss just plugging it in.
[22:16] <guestuser> EriC^^: Even more so when unplugging it.
[22:18] <cihan> EriC^^, guestuser: I think I will check with the data recovery tools such as Seagte bcs Im not able to find such a big harddrive -- max hdd I found is TB
[22:19] <cihan> EriC^^, guestuser: What do you think?
[22:20] <EriC^^> cihan: when you said it shows one empty whole partition, what did you mean?
[22:20] <guestuser> cihan: What error did you initally get and what were the circumstances?
[22:20] <larsantos> guestuser: just out of curiosity, how do you recover data from an hdd without connect it?
[22:20] <guestuser> cihan: i.e. all you did was plug it in etc.
[22:20] <guestuser> larsantos: You connect it once and create an image and then work with the image
[22:20] <cihan> EriC^^, it shows one parititon which is completely empty
[22:20] <larsantos> I see, thx
[22:21] <guestuser> EriC^^: Which is to be expected as most consumer drives only contain a single parittion
[22:21] <cihan> guestuser: Initially Win7 said you need to format it to use. Then I did chkdsk /x and not it shows completely empty
[22:21] <EriC^^> guestuser: lovely
[22:21] <EriC^^> sorry, lovely;
[22:21] <guestuser> cihan: Did you just plug it in and it popped up an error? What error?
[22:23] <cihan> guestuser, yes, it was saying need to format it
[22:24] <guestuser> cihan: Windows said that?
[22:25] <cjbirk> hello
[22:26] <daftykins> hi
[22:27] <cjbirk> i have a problem here: http://pastebin.com/rPrhc22Z shotwell kills my updates
[22:27] <guestuser> sudo apt-get -f install
[22:27] <cjbirk> what is -f ?
[22:27] <xangua> cjbirk: contact the PPA maintainer or remove the PPA repository and it's packages
[22:28] <OerHeks> cjbirk, shotwell from that yorba ppa ?
[22:28] <Nganu> Huii
[22:28] <cjbirk> ya idk what yorba is
[22:28] <cjbirk> i have that in there for something else i guess
[22:28] <guestuser> xangua: I should probably click the link next time lol
[22:28] <xangua> ¿?
[22:29] <daftykins> guestuser: yeah, best to have the info before passing on advice
[22:29] <cjbirk> any way i can prevent yorba from updating shotwell so that i can still have shotwell?
[22:30] <guestuser> hold the package
[22:30] <cuddylier> guestuser: I have 40 boxes using that script and all the other boxes are okay. If someone was to spam refresh then it would affect all the boxes with the script on them.
[22:31] <daftykins> cjbirk: you have it installed from both the ubuntu repos and are attempting to install this newer version from this PPA, you need to pick which one you want.
[22:31] <cihan> guestuser, yes it was from win
[22:31] <cihan> guest, then i tried linux but it didnt show too -- i dont remember the error though :(
[22:31] <guestuser> cuddylier: something is not killing the child processes.
[22:32] <cuddylier> guestuser: Yeah, I really dunno anymore.. it has been a problem for days
[22:32] <guestuser> cuddylier: it looks like it is being spawned by apache and that is the only thing there.
[22:32] <cuddylier> guestuser: I'll try keeping it disabled or something and see
[22:32] <cuddylier> except stopping apache breaks SSH so I'll reboot
[22:33] <guestuser> cuddylier: apache should not kill SSH
[22:33] <EriC^^> cihan: try testdisk again
[22:33] <cuddylier> guestuser: Well, it hangs then, it hangs on KVM too
[22:33] <EriC^^> this time go to intel > advanced > list
[22:33] <cuddylier> When I say 'kill' I really mean hang
[22:34] <cihan> EriC^^, sure let me try it now
[22:34] <cuddylier> The command just hangs
[22:34] <guestuser> cihan: It sounds like a corrupted partition table header. Did you unplug without ejecting or something last time you used it?
[22:34] <cihan> guestuser, i didnt but im guessing that there was a connection problem bcs i moved my laptop just a bit and right after that this happened
[22:35] <guestuser> cihan: Were you writing data to it when this happened?
[22:35] <cihan> guestuser, no it was completely idle, no read no write
[22:35] <cihan> EriC^^, it shows completely the same folders
[22:36] <EriC^^> i'm curious about the boot sector recovery
[22:36] <EriC^^> dont press it though
[22:36] <cihan> ok
[22:36] <EriC^^> guestuser: any idea about that?
[22:36] <guestuser> EriC^^: That is just for MBR it sounds like.
[22:37] <r3dr0p> swag
[22:37] <guestuser> Personally I would dump to an image and then use gparted to delete the partition and re-add it. Just don't format.
[22:37] <r3dr0p> I used ubuntu and it hacked me
[22:37] <r3dr0p> so I quit
[22:37] <guestuser> I have used fdisk to do similar on FAT32 drives that I pulled without syncing.
[22:37] <Ben64> r3dr0p: not possible, but ok, bye
[22:37] <guestuser> I have never tried it on NTFS though
[22:38] <r3dr0p> it did.
[22:38] <r3dr0p> it made my printer print random shit
[22:38] <Ben64> watch the language here
[22:38] <guestuser> r3dr0p: No it did not.
[22:38] <r3dr0p> It did.
[22:38] <r3dr0p> Why else would it do it?
[22:38] <guestuser> r3dr0p: You broke CUPS.
[22:38] <slampunk> hopefully not a 3d printer!
[22:38] <Ben64> if you want to ask a support question, go ahead. this channel is not for ranting though
[22:38] <r3dr0p> How do I make it not hack me?
[22:39] <Ben64> thats not a legitimate question
[22:39] <guestuser> r3dr0p: It didn't hack you so no trouble found.
[22:39] <cihan> EriC^^, guestuser: So shall I use the additional harddrive I found with 1TB for copying as an image?
[22:39] <r3dr0p> That is a questions.
[22:39] <EriC^^> cihan: how big is the data on the disk?
[22:39] <guestuser> r3dr0p: You are trolling. No trouble found.
[22:39] <r3dr0p> the data is 11 bigs.
[22:39] <r3dr0p> I am not, I can show you the printouts if you'd like.
[22:39] <guestuser>  /ignore r3drop
[22:39] <EriC^^> guestuser: could she remove the empty space before dumping it even though the partition table isn't correct?
[22:40] <cihan> EriC^^, I should have around 800GB full on the external -- other will be completely freed (I ll format it)
[22:40] <guestuser> EriC^^: Probably not because we have no idea where the data starts or stops. And it is fragmented so chunking is a bad idea as well.
[22:40] <guestuser> EriC^^: Thank M$ for that. Fragmenting was useful with tiny drives many years ago. No it is depp'd.
[22:41] <r3dr0p> Any ideas guys?
[22:41] <guestuser> r3dr0p: Stop breaking CUPS.
[22:42] <cihan> EriC^^, guestuser: So does that make sense?
[22:43] <guestuser> cihan: My advice remains the same: Get a larger drive to image the affected drive too. Analyze the image to recover data and/or rebuild the partition header on the affected drive.
[22:44] <guestuser> cihan: Aside from that I have no advice on how to rebuild the partition header on the drive without risking further data loss.
[22:45] <guestuser> cihan: Any write operation is going to destroy data. You need an image to work with so you do not lose the data on the affected drive.
[22:45] <cihan> guestuser, thanks for the info -- let me try the Seagate Data Recovery first to see if it will be able to recover
[22:45] <guestuser> And you can not change anything without a write operation. Be it recovering data or recreating the previous partition.
[22:45] <guestuser> cihan: Keep in mind that it is going to perform write operations and there is potential for data loss that way.
[22:46] <cihan> guestuser: why does it do a write? it will just scan the hdd, isnt it?
[22:46] <r3dr0p> So uh
[22:46] <r3dr0p> can anyone help me?
[22:46] <cihan> I saw that it was scanning the drive and showing the folders
[22:46] <guestuser> cihan: How is it going to recover the data? Where does it put what it finds?
[22:46] <cihan> But I didnt do a full scan, i did only for 5  min
[22:46] <cihan> I shows where to copy them
[22:47] <guestuser> cihan: IT will probably take hours to complete. And when it finds 80% of your data it will overwrite the other 20% recovering what it can.
[22:48] <cihan> guestuser, OK makes sense
[22:49] <larsantos> r3dr0p: in what?
[22:49] <r3dr0p> Ubuntu keeps hacking my printer
[22:49] <ikonia> no it doesn't
[22:49] <ikonia> ubuntu is not "hacking" anything
[22:50] <guestuser> ^
[22:50] <ikonia> r3dr0p: if you need help, explain the problem and how people can help, without silly statements like "ubuntu is hacking my printer"
[22:50] <Pazooza> r3dr0p, unplug your rinter.
[22:51] <Pazooza> r3dr0p, unplug your printer.
[22:51] <r3dr0p> How will that help?
[22:51] <EriC^^> cihan: guestuser can't it write the data to another disk?
[22:51] <ikonia> r3dr0p: focus - explain the problem and how people can help
[22:51] <r3dr0p> Well, I installed 14.04 on a netbook and now my printer keeps printing
[22:51] <Pazooza> It will make you stop complaining.
[22:51] <r3dr0p> I have turned off the printer but when I turn it back on it begins again
[22:51] <ikonia> r3dr0p: what is it printing
[22:51] <r3dr0p> test pages
[22:52] <EriC^^> does it say pwned ?
[22:52] <r3dr0p> no?
[22:52] <ikonia> r3dr0p: if you unplug the printer from the ubuntu netbook - does it keep printing
[22:52] <ikonia> EriC^^: that's not helpful
[22:52] <EriC^^> then you're ok
[22:52] <r3dr0p> It's on the network.
[22:52] <ikonia> EriC^^: help - or don't contribute
[22:52] <ikonia> r3dr0p: ok, how is it on the network, wired/wireless ?
[22:52] <r3dr0p> Wired
[22:52] <guestuser> r3dr0p: Then you are using the wrong driver or you hit print too many times.
[22:52] <Cosssmin> I have one problem, I'm using Mad Box based on Ubuntu 12.04 and I want to make a bootable usb using terminal. All the files are copied into usb but he refuse too boot after restart.
[22:52] <ikonia> r3dr0p: unplug it from the network, does it keep printing ?
[22:52] <r3dr0p> It has printed like 40, I didn't hit print that many times.
[22:52] <r3dr0p> Yes.
[22:52] <ikonia> Cosssmin: not supported here
[22:53] <guestuser> Cosssmin: Did you install a boot loader?
[22:53] <r3dr0p> * no
[22:53] <r3dr0p> It stops when I unplug the netbook
[22:53] <guestuser> r3dr0p: Clear the print queue.
[22:53] <r3dr0p> Have done that
[22:53] <ikonia> r3dr0p: ok, so with the printer unplugged from the network, remove the printer from your ubuntu system
[22:53] <r3dr0p> it refills
[22:53] <ikonia> r3dr0p: totally remove the printer from ubuntu
[22:53] <r3dr0p> I know I could do that ikonia but I need the printer to be hooked up
[22:53] <guestuser> r3dr0p: Install a different driver and blacklist the one you are using.
[22:54] <ikonia> r3dr0p: we'll get to that
[22:54] <r3dr0p> alright
[22:54] <Cosssmin> guestuser : no ..
[22:54] <ikonia> r3dr0p: remove the printer from the system
[22:54] <r3dr0p> okay
[22:54] <ikonia> Cosssmin: your OS is not supported in this channel
[22:54] <guestuser> Cosssmin: Hence it not booting.
[22:57] <guestuser> udeb needs to hurry up and die
[22:57] <Rhapsody> I just installed Apache on my machine, and going to the IP gives me an "It works" page. Now, to make my website appear, where do I put it?
[22:58] <guestuser> Rhapsody: /var/www
[22:58] <ikonia> Rhapsody: I suggest reading a very basic guide to apache first
[22:58] <guestuser> Rhapsody: probably. Could be in /opt/www
[22:58] <ikonia> it's not /opt/www
[22:58] <Rhapsody> guestuser: That directory is normally only writable by superuser, isn't it?
[22:58] <balduin1> hey, my bind installation does not work!
[22:58] <EriC^^> /var/www/html
[22:58] <gartral> hey all, I got an interesting issue, I'm working on an HP EliteBook 2730p, Ubuntu 14.04 64-bit and the mouse looses interactivity with windows in Unity... I'm up to date with the intel i915 drivers and latest kernel... I've gone through and deleted all of the .xsession* and .Xauthority files from home and i'm at a loss...
[22:58] <ikonia> it's "sites-enabled" site will have a document root
[22:59] <daftykins> guestuser: please stop throwing out guesses to people
[22:59] <Rhapsody> I can't upload to it via FTP
[22:59] <Rhapsody>  /var/www/html is locked
[22:59] <tafa2> is anyone able to help with this? http://serverfault.com/questions/633715/configure-ufw-pptpd-and-dnsmasq-on-the-same-server
[22:59] <EriC^^> Rhapsody: it's owned by root
[22:59] <ikonia> Rhapsody: you can yes,
[22:59] <ikonia> Rhapsody: the first thing is to get the right documentroot for your site
[22:59] <daftykins> Rhapsody: yeah, you need to read a beginners guide
[22:59] <ikonia> Rhapsody: you can then set the permissions
[23:00] <ikonia> Rhapsody: this is why I'm suggesting you read a very basic introduction before going forward
[23:00] <Rhapsody> ikonia: Any recommended introductions?
[23:00] <ikonia> Rhapsody: https://help.ubuntu.com/14.04/serverguide/httpd.html
[23:00] <ikonia> Rhapsody: live by https://help.ubuntu.com
[23:01] <ikonia> Rhapsody: it's official documentation, and well maintained, it coveres basic to advanced topics
[23:01] <ikonia> Rhapsody: live by it
[23:03] <slampunk> ask r3dr0p for a paper copy, he has like 40
[23:03] <r3dr0p> ?
[23:03] <r3dr0p> 40 copies of the test page, yes.
[23:03] <ikonia> r3dr0p: ignore it, he was trying to be funny
[23:03] <ikonia> r3dr0p: focus on removing the printer from your system for the moment
[23:03] <r3dr0p> I removed it
[23:04] <r3dr0p> it's in the other room now.
[23:04] <ikonia> r3dr0p: I didn't mean move the physical printer
[23:04] <ikonia> r3dr0p: I meant remove/delete it from the ubuntu system
[23:04] <r3dr0p> what else do I do to it?
[23:04] <r3dr0p> the system is the computer
[23:04] <r3dr0p> I removed it from it?
[23:04] <ikonia> no it's not
[23:04] <ikonia> you said it was a network printer
[23:04] <r3dr0p> it is.
[23:04] <r3dr0p> network [23:04] <r3dr0p> removed from network
[23:04] <ikonia> and your ubuntu netbook was connecting to it
[23:04] <ikonia> no, network == network
[23:04] <ikonia> there are 2 different things here
[23:04] <r3dr0p> system of network
[23:04] <ikonia> remove the device from the ubuntu operating system
[23:05] <ikonia> no, network == network
[23:05] <ikonia> no other thing
[23:05] <ikonia> network == network
[23:06] <r3dr0p> okay
[23:06] <r3dr0p> so it's outside now
[23:06] <r3dr0p> the network is in my house
[23:06] <r3dr0p> so I'll be fine.
[23:06] <ikonia> ok, you are now trolling
[23:06] <ikonia> this will end
[23:06] <ikonia> I've just stated very clearly - do not move the physical printer
[23:06] <guestuser> he never stopped trolling
[23:06] <r3dr0p> Okay.
[23:06] <r3dr0p> It's unplugged tho
[23:06] <ikonia> remove it from the operating system
[23:06] <r3dr0p> and removed from the device manager
[23:06] <ikonia> so this is over
[23:07] <r3dr0p> :|
[23:07] <guestuser> auto rejoin is not very nice
[23:07] <guestuser> udeb died YAY!
[23:10] <r3dr0p> any idea?
[23:10] <guestuser> Now to wait for partitioner to die.
[23:10] <guestuser>  /ignore r3dr0p
[23:10] <ikonia> guestuser: don't need to announce it
[23:10] <guestuser> ikonia: It was an accident.
[23:11] <guestuser> ikonia: The spacebar jumped out in front of my thumb.
[23:11] <guestuser> It happens sometimes. Just saying.
[23:12] <r3dr0p> :C
[23:12] <r3dr0p> I cry.
[23:14] <Moneymaker1>  Manage your football club and gain REAL MONEY !! Play for FREE at  :  www.goaltycoon.com/bestfootballgame/sastavr
[23:14] <helpo> please help me ; how to install PPTP plugin in  the network manager ia m trying to configure a vpn connection .
[23:14] <gartral> hey all, I got an interesting issue, I'm working on an HP EliteBook 2730p, Ubuntu 14.04 64-bit and the mouse looses interactivity with windows in Unity... I'm up to date with the intel i915 drivers and latest kernel... I've gone through and deleted all of the .xsession* and .Xauthority files from home and i'm at a loss...
[23:15] <ikonia> gartral: so the windows are there, you just can't interact with them ?
[23:15] <helpo> any  idea ?
[23:17] <helpo> i couldnt find any useful information in the web /.
[23:17] <helpo> So?? can somebody help me here  , please .
[23:18] <jamesjeffery> Hi guys, anyone managed to install Ubuntu 14 on Macbook 11,2? I've installed it and works fine but for some odd reasons when I run airodump-ng it logs me out and I get the error: could not apply stored configuration
[23:20] <jamesjeffery> I'll try removing .config/monitors.xml see if that helps
[23:20] <larsantos> helpo: https://help.ubuntu.com/community/VPNClient
[23:21] <larsantos> and tehre are a lot more resources out there
[23:21] <larsantos> *there
[23:22] <gartral> ikonia: not with the mouse, i can tab about and interact that way, but mouse won't click in the window... mouse works everywhere else
[23:24] <ikonia> gartral: very odd
[23:26] <larsantos> gartral: in the desktop,the mouse works but when over a window it doesn't, its that it? does the cursos show?
[23:28] <gartral> larsantos: incorrect... mouse doesn't interact with anything in the "desktop" area... just the dock-bar and top bar
[23:33] <larsantos> gartral: I was just asking, not affirming
[23:36] <eridu> is there a way to throttle/rate-limit outbound network traffic to a list of domains? I'd like to simulate having a slow connection to a specific site.
[23:36] <blimps> Anyone here use Multimarkdown?
[23:38] <gartral> larsantos: and i was refining!
[23:39] <larsantos> gartral: ok
[23:40] <larsantos> gartral: my question was because I had a flsh of some years ago my cursor working alright in the desktop and desappeering when abova any window
[23:41] <larsantos> it was lots of uyears ago when <I was fiddling with linux (one of the times)
[23:45] <reisio> larsantos: you're thinking of a 'focus-follows-mouse' window manager / configuration
[23:45] <reisio> probably more of the older ones do that
[23:45] <reisio> or did
[23:45] <reisio> by default
[23:45] <larsantos> just seemed familiar, but I'm too damn newbie to knhw what's the problem
[23:45] <gartral> larsantos: ahh, yea, I remember those days
[23:45] <reisio> larsantos: what is the problem?
[23:46] <larsantos> not mine
[23:46] <reisio> hrmm?
[23:47] <gartral> reisio: my issue is that my mouse on a laptop won't interact with windows, but will with the dock
[23:47] <larsantos> reisio: gartral has a problem I was trying to help
[23:48] <bonez2046> I have had it, am done with 14.04...I can't get my video bog issues resolved....what's the best prior version that won't kill my video responsiveness?
[23:49] <gartral> bonez2046: what was your issue?
[23:49] <reisio> gartral: won't interact how?
[23:49] <reisio> sounds like your window decorator is dead
[23:49] <bonez2046> gartral: after I installed 14.04 my system is really bogged down....takes forever to boot up and give a controlable screen
[23:50] <reisio> gartral: nohup gtk-window-decorator --replace &>/dev/null &
[23:50] <gartral> reisio: can't click in windows... can in dock and top navbar... I'm using Unity...
[23:50] <bonez2046> I have a radeon ati card....
[23:50] <^barry^> anyone running a vm for testing windows?
[23:50] <bonez2046> it all started after upgrading to 14.04 lts
[23:50] <gartral> bonez2046: did you do a system upgrade or a fresh install?
[23:51] <bonez2046> I just upgraded
[23:51] <gartral> ikonia: nope, still does it...
[23:51] <bonez2046> I have a second hard drive in my box, want to put some other version on it and see how it behaves
[23:51] <bonez2046> about 2 months ago
[23:51] <larsantos> cya guys take care
[23:52] <reisio> ^barry^: probably someone
[23:52] <bonez2046> by fresh install, gartral , you mean reformat and install clean?
[23:52] <gartral> ikonia: new development, if I muck about and cycle touchpad off/on in mouse settings interactivity is returned *until* I click in the dockso this isn't a hardware fault I think
[23:53] <gartral> bonez2046: yep
[23:54] <bonez2046> gartral: I need to back up my data...like I said, I have a second hdd in system, same size as current hdd...should I just install 14.04 to that other drive and run off it and transfer my data and apps over, see if thath works?
[23:54] <gartral> bonez2046: in my experience upgrades quite often break systems in very unpridictable ways..
[23:54] <gartral> bonez2046: worth a shot!
[23:56] <gartral> hmm
[23:58] <gartral> ikonia: well I just made progress... making a new account and logging in to that works fine and dandy...