[00:01] <bennypr0fane> ...and when I manage that, I got the next problem: how do I find the line breaks?
[00:01] <valorie> bennypr0fane: control + alt + f2
[00:01] <sgclark> ctrl alt F2 sorry
[00:01] <valorie> you can do `cat ~/.kde/share/config/katerc
[00:01] <valorie> `
[00:02] <valorie> errr, vi ~/.kde/share/config/katerc
[00:03] <bennypr0fane> orrr, nano ~/.kde/share/config/katerc ?
[00:04] <bennypr0fane> which value would you set to get no line lenght limit? blank? zero?
[00:05] <valorie> that is the bit I don't know, bennypr0fane
[00:05] <valorie> I would look at bugs against kate about this and see if there is any discussion of it
[00:06] <bennypr0fane> valorie: ha, got someone in #kate!
[00:06] <valorie> or google very specifically about the issue
[00:06] <valorie> \o/
[00:06] <bennypr0fane> it can be set in the ui!
[00:06] <valorie> oh good lord
[00:06] <valorie> lol
[00:06] <valorie> here we are planning a trip around the barn
[00:06] <bennypr0fane> Configure Kate > Open/Save > "General" tab > Line length limit    ....yeah, i didn't look there...
[00:06] <valorie> when you can just open the door
[00:07]  * valorie feels a bit dim right now
[00:07] <valorie> moar coffee needed!
[00:07] <ChrisR> hi
[00:08] <ChrisR> i have a problem with Ark. it produces invalid zip files.
[00:09] <ChrisR> packing and opening them in ark is fine, but i they cannot be unpacked by other packers any more, not even unzip. packing with zip works fine, so it cannot be a problem with the packker
[00:09] <valorie> ChrisR: this sounds like a KDE problem
[00:10] <valorie> please file a bug in bugs.kde.org, after searching it for similar bug reports
[00:12] <ChrisR> thing is, it works in another ubuntu installation, without any problems.
[00:12] <valorie> hmmm
[00:12] <valorie> perhaps there is a zip plugin you are missing or something?
[00:13] <valorie> sorry, I need to go cook dinner
[00:13] <ChrisR> ok
[00:14] <arthurfiggis> hello :) currently in kubuntu (even as of 14.10), in order to use and configure more than one monitor (or to use the HDMI connection to my TV), I have to install kde-workspace-randr, it's not installed by default...anyone using the plasma 5 tech preview know if this is still going to be the case in the future, or does it have better support for multiple monitors?
[00:16] <otjura> considering it's a tech preview I'd think so
[00:16] <otjura> not all KDE4 functionality has been ported there yet
[00:16] <sgclark> I don't have HDMI to my tv to test sorry
[00:17] <arthurfiggis> otjura: that makes sense, sure :) i'm not expecting the tech preview to be finished already of course! was just curious as to how it will work in the future...i'm assuming that kubuntu will still -have- dual monitor support obviously, just wondering what kind
[00:18] <arthurfiggis> sgclark: oh that's quite alright, thanks...i might install the tech preview version on a separate partition myself if i have the time, but i just installed 14.10 about an hour ago so i should probably hold off until i have my stuff installed again :)
[00:50] <valorie> arthurfiggis: kscreen is the future, so check with those devels for specific info
[00:54] <arthurfiggis> valorie: ahh, thanks very much for the info...i'll probably stop by the kde channel, and in the meantime look up a bit more about kscreen to see if i can find out more from there :) my desktop is connected to my tv currently so i can play movies and such through vlc and watch them on a big screen, so as long as there's still some way to make that work, no worries!
[00:54] <arthurfiggis> (and i'm sure there will be, i'm guessing a couple of kde devs probably use more than one monitor :) )
[00:55] <valorie> very cool idea, arthurfiggis
[00:57] <arthurfiggis> valorie: it's pretty nice! works well too, once randr is installed anyway you can switch one monitor off so that you're not burning both at once as well...the ps3 is hooked up to the same thing, although now that there's a ton of linux games on steam (and steam itself is in the official repos), i might not have much need for a console in the near future...even better! ;)
[02:21] <Guest83902> hello
[02:28] <Levitcus> !ops |  What if God, desiring to show his wrath and to make known his power, has endured with much patience vessels of wrath prepared for destruction, 23 in order to make known the riches of his glory for vessels of mercy, which he has prepared beforehand for glory—
[02:58] <astroty> Hello, could someone help me? DRI_PRIME is not working on kubuntu 14.10
[03:00] <valorie> astroty: what is dri_prime?
[03:00] <astroty> valorie: https://wiki.archlinux.org/index.php/PRIME
[04:57] <Leviticus> !ops | waaaaa ban me
[04:58] <Leviticus> !ops | waaaaa ban me
[05:00] <Leviticus> !ops | waaaaa ban me
[05:00] <Leviticus> !ops | waaaaa ban me
[05:00] <Leviticus> !ops | waaaaa ban me
[05:00] <Leviticus> !ops | waaaaa ban me
[05:00] <Leviticus> !ops | waaaaa ban me!
[05:00] <Leviticus> !ops | waaaaa ban me!!
[05:00] <unopaste> Leviticus you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[05:46] <jori_> Anyone seeing occasional stalls of everything that becomes ok when when you ctrl+alt+f1/f7 back ?
[06:05] <genii> !aptfix
[06:30] <valorie> @comment 64855 mistaken use of tools to ban myself
[07:41] <mario55> automata film
[07:43] <mario55> wrong turn6
[07:45] <bombe_> Hi,i have a problem with steam on KDE, steam is opening but when i'm trying to install games they dont download ( tryed reboot OS,restarted steam ,running steam from terminal ),btw in ubuntu steam works like magic, but i orefer kde over unity
[08:01] <bombe_> did someone had the same problem
[08:01] <mario55> automata
[09:02] <lordievader> Good morning.
[09:06] <bombe_> Good!
[09:18] <bombe_> I tried so many times but steam is not working in kubuntu, so frustrating even internet speed goes down while steam is on.
[09:19] <bombe_> After quiting steam internet is back
[09:51] <valorie> !steam
[09:51] <valorie> ah, he left
[09:51] <valorie> why leave when your question has not yet been answered?
[12:37] <jimjo> i have a problem installng scribus
[12:37] <jimjo> i get a error message
[12:37] <jimjo> its netherlands
 ->De volgende pakketten hebben niet-voldane vereisten:
  scribus : Vereisten: libfontconfig1 (>= 2.9.0) maar 2.8.0-3ubuntu9.1 zal geïnstalleerd worden
            Vereisten: libpodofo0.9.2 maar het zal niet geïnstalleerd worden
            Vereisten: libtiff4 (> 3.9.5-3~) maar 3.9.5-2ubuntu1.6 zal geïnstalleerd worden
 E: Kan problemen niet verhelpen, u houdt defecte pakketten vast.
[12:37] <unopaste> jimjo you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[12:39] <BluesKaj> Howdy all
[12:39] <jimjo> can anyone explain  me what  "(>=2.9.0) but 2.8.0-3ubuntu9.1......" means?
[12:40] <BluesKaj> greater than or equal to 2.9.0
[12:41] <BluesKaj> < means less than
[12:42] <jimjo> muon wont install it
[12:43] <BluesKaj> install what?
[12:44] <jimjo> any of the 3 needet for scribuspackages
[12:45] <BluesKaj> have you updated and upgraded lately
[12:45] <jimjo> jep updated
[12:45] <jimjo> after that update scribus was gone:(
[12:45] <jimjo> !
[12:45] <BluesKaj> upgrade now then dist-upgrade
[12:46] <jimjo> no risk?
[12:46] <jimjo> had some issues some jears ago
[12:46] <jimjo> since then i upgrade through full installation
[13:09] <jimjo> if i upgrade.. will it be kubuntu? seems like ubuntu it saya->"= Welcome to Ubuntu 14.04 'Trusty Tahr' ="
[13:10] <jimjo> thats is shown with muon
[13:10] <zahar> ну
[13:10] <zahar> и чего тут
[13:52] <Moter8> j #kubuntu-devel
[13:53] <Walex2> PasNox: then 'kwrapper4 kded4' and then use 'kcmshell4 kcmded' to restart the daemons
[13:55] <PasNox> Walex2: ok, thank you ;)
[13:55] <Moter8> Hey, just installed the kubuntu plasma5 beta2 and after apt-get uprading no windows are draggable
[13:56] <Moter8> There's also no minimized, maximize and close buttons. Just after the installation it worked fine. Some upgrade probably broke it.
[13:57] <astroty> This looks like kwin problem. Check if it's running
[13:58] <Moter8> argg, konsole doesnt seem to accept any input
[13:58] <Moter8> firefox neither
[13:59] <astroty> Yep, definitively seems like kwin problem
[14:01] <astroty> Someone here knows why DRI_PRIME does not work on Kubuntu 14.10?
[14:07] <Moter8> Is there no screen keyboard on kubuntu??
[14:07] <Moter8> -?
[14:08] <Moter8> Can't execute any command as keyboard input isnt getting registered
[14:10] <astroty> Did you try restarting kde? Normally kwin gets started with it automatically
[14:10] <Moter8> i tried restarting the vm, yes
[14:10] <Moter8> still the same
[14:13] <astroty> Check if Kwin is indeed installed
[14:15] <Moter8> astroty, how, without a terminal?
[14:16] <astroty> Moter8: you still should be able to acess another terminal with ctrl+alt+f-6
[14:16] <astroty> 1-6*
[14:17] <Moter8> doing that does nothing
[14:19] <Moter8> so i cheated and got an enter to run.
[14:19] <Moter8> with copy-paste from host and newline
[14:21] <Moter8> so kwin is not installed
[14:51] <PasNox> what's the package to be installed to test kde frameworks 5 ?
[14:51] <PasNox> (and plasma 5)
[14:51] <Moter8> I did it with some ppa
[14:52] <Moter8> worked quite nicely, except some plasma5 bugs
[14:52] <PasNox> utopic should have it right the official repo, no ?
[14:53] <Moter8> sorry, not sure
[14:53] <Moter8> PasNox, I followed https://community.kde.org/Plasma/Packages
[14:53] <Moter8> ctrl+f Kubuntu
[14:56] <PasNox> looks like i need kde-next ppa
[14:57] <PasNox> but it seems we can't have dek4 and kde framework 5 at the same time ?
[14:57] <PasNox> accordsing to this page: http://www.kubuntu.org/news/kubuntu-14.10
[14:59] <PasNox> looks like running conointly kde4 and kde5 is utopic :)
[14:59] <PasNox> conjointly*
[15:03] <sebastix> file:///home/sebastix/Videos/Kamera%20Videos/Basti%20bei%20den%20hausaufgaben%201.MOV
[15:03] <sebastix> say hallo
[15:03] <sebastix> ioj
[15:06] <lordievader> PasNox: There are two versions of the Utopic isos, one with Plasma4 the other with Plasma5.
[15:07] <PasNox> lordievader: yeah i saw that but i'm too lazy for today xD I would have prefered to have both isntalalble at same time ( like the neon project)
[15:07] <lordievader> For Utopic that ain't possible.
[15:27] <mario55> ciao
[15:29] <code0x_r> hi everybody
[15:31] <PasNox> lordievader: yeah ;)
[15:31] <BluesKaj> hi code0x_r
[15:35] <BluesKaj> ok code0x_r what's your vpn issue ?
[15:36] <code0x_r> look I use  watchguard ... so i wanna configure a vpn i have the cert ... all parameters for a connection but ..i cant ..
[15:37] <code0x_r> maybe its the installation of vpn
[15:37] <code0x_r> i'm new in kubuntu
[15:40] <saro> pollo
[15:54] <lisacvuk> can some one tell me is linux better for html programming than windows?
[15:56] <lisacvuk> hi?
[15:57] <lisacvuk> anyonealive?
[15:57] <lisacvuk> *
[16:03] <Moter8> lisacvuk, well, it all depends on the tools you are going to use
[16:05] <lisacvuk> idk, can you recomend me some tools?
[16:11] <code0x_r> bluefish? no?
[16:13] <lisacvuk> ?
[16:41] <GT> I am having trouble creating a startup disk for 14.10 on a Lenovo T540p that will boot without error.  First of all, te startup disk creator has never worked for me without also use of gparted and to format a usb stick prior to use.  The button to erase the usb within the startup creator has never worked for me on any installation from any computer that I've used.
[16:45] <GT> Has anyone else had a difficulty in creating a 14.10 startup disk on a usb stick using a Lenovo T540p?
[16:56] <GT> I suppose I'm on my own.
[16:59] <arthurfiggis> sorry, i don't have/never used that laptop before :( someone else here may have though, always good to check back every now and then!
[17:07] <GT> Startup disk:  gfxboot.c32: not a com32R image
[17:16] <vijay_> hiii
[17:16] <vijay_> aneone
[18:30] <Snowhog> What event triggers network-manager to auto-start on boot? While networking auto-starts on my 64-bit Kubuntu 14.04.1 (KDE 4.14.2) w/kernel 3.13.0-30-generic, after a sudo do-release-upgrade -d networking does not auto-start. I have to start it manually with sudo service network-manaager start.
[18:34] <BluesKaj_> Snowhog, -d in the upgrade command isn't necessary unles you're upgrading to 15.04 development OS
[18:36] <BluesKaj_> Snowhog, do you have a network manager icon in the system tray before connecting ?
[18:36] <Snowhog> BluesKaj_: Understand, but it's what I've always used with do-release-upgrade and I've never had this issue. In fact, my 32-bit 14.04.1 w/KDE 4.14.2) and the same kernel didn't suffer this problem. After upgrade to 14.10, networking still auto-started.
[18:37] <BluesKaj_> so you're on 15.04 then ?
[18:37] <Snowhog> BluesKaj_: Yes. But with the small red X. No wired or wireless connection is identified. Even creating them there doesn't work. Have to do the manual starting. And that doesn't survive a reboot.
[18:37] <Snowhog> BluesKaj_: No, it upgrades to 14.10.
[18:37] <BluesKaj_> ok
[18:38] <BluesKaj_> is this ethernet or wifi?
[18:38] <Snowhog> BluesKaj_: Both.
[18:39] <giorgio> hola
[18:39] <BluesKaj_> so you have the same problem on 2 machines, I assume one is a laptop and the other a desktop ?
[18:40] <BluesKaj_> Snowhog,^
[18:40] <Snowhog> BluesKaj_: No, only on the 64-bit laptop. My 32-bit laptop dist-upgraded to 14.10 without this issue.
[18:40] <Snowhog> **do-release-upgraded I mean
[18:41] <BluesKaj_> Snowhog, yes there appears to be a bug on 14.10 with wifi start
[18:42] <Snowhog> BluesKaj_: So you know, I restored my 14.04.1 to my 64-bit laptop. I'm looking for information as to why the issue presented.
[18:42] <Snowhog> BluesKaj_: But why was the ethernet affected also?
[18:43] <Snowhog> BluesKaj_: Both are laptops. The 32-bit is a Core-duo Pentium. the 64-bit is an Intel i3.
[18:46] <BluesKaj_> Snowhog, which wifi chip does the 64bit laptop have
[18:48] <Snowhog> BluesKaj_: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01). The ethernet contoller is Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05). Both connections come up when manually starting the service with sudo service network-manager start.
[18:48] <Snowhog> So something is preventing then from auto-starting in 14.10.
[18:51] <BluesKaj_> odd  Snowhog , I have the BCM 4313 as well on my intel i3,lenovo g500, but i didn't have any wifi start problems on it
[18:54] <sanotehu> plasma-desktop has been freezing a lot and I don't know why, it seems to happen when I'm not doing anything, it takes a bunch of cpu when it freezes
[18:54] <BluesKaj_> Snowhog, did you setup the network management widget for the system tray?
[18:54] <Snowhog> BluesKaj_: Is it possible that when I release-upgraded my 64-bit, that more of systemd was installed that was on my 32-bit? I ask, because I didn't release-upgrade the 64-bit at the same time as the 32-bit. 32-bit was release-upgraded on October 16th. I first release-upgraded the 64-bit on October 26th.
[18:55] <BluesKaj_> sanotehu, sorry to say that's the nature of the beast
[18:55] <sanotehu> owell
[18:56] <BluesKaj_> Snowhog, have you upgraded since?
[18:56] <Snowhog> I tried do-release-upgrade yesterday. Same issue. No networking on boot. Still had to manually start it.
[18:59] <Snowhog> BluesKaj_: Something during the installation of all the packages downloaded had to have changed and/or removed 'something' that causes networking not to auto-start, but I don't know what. Obviously the components to have networking are present, because I can start it manually.
[18:59] <BluesKaj_> Snowhog, yes, but once you had a connection did you sudo apt-get update && sudo apt-get upgrade
[19:00] <Snowhog> BluesKaj_: Ah. Yes. It's 'standard procedure' for me.
[19:01] <Snowhog> ^^except I always use apt-get dist-upgrade; always have; always will. Handles dependencies better.
[19:01] <BluesKaj_> have you checked the driver manager in system settings
[19:02] <Snowhog> BluesKaj_: Yes. It finds the driver and it is marked as in use -- once I manually start the service.
[19:03] <Snowhog> BluesKaj_: Hmm. But, I don't remember if I waited long enough without having started the service manually, to see if the driver got identified "for use" and then selected it and applied. Hmm. Might have to try that.
[19:04] <Snowhog> BluesKaj_: But that would only establish wifi. It still doens't explain why the ethernet wasn't started.
[19:06] <BluesKaj_> yes, are you using systemd to boot ?
[19:08] <Snowhog> BluesKaj_: systemd? I don't believe so, as Ubuntu isn't going to start using systemd until 15.10 IIRC. They are only incorporating small pieces of systemd in 14.10, but still using upstart (?) to manage the boot processes.
[19:08] <rww> I think the current ETA is halfway through the 15.04 dev cycle
[19:08] <rww> so yes, 14.10 uses upstart
[19:11] <BluesKaj_> Snowhog, some users are enabling systemd to boot their machines , but systemd is now associating with devices with udev, perhaps that could have an influence on some hardware
[19:13] <BluesKaj_> it hasn't on my laptop, altho it's running 15.04 now with no wifi probs
[19:14] <Snowhog> BluesKaj_: I have plenty of time today, so I'll give it another go. Who knows. If networking still doesn't auto-start, I'll let the system find the driver and select it and apply, then see what is what. I'll use sudo do-release-upgrade -m this time. I have my backup, so I can always go back to 14.04.1.
[19:15] <Snowhog> I'll report my results here later. Thanks for the chat.
[19:15] <BluesKaj_> Snowhog, no point using sudo release-upgrade if you already ahve 14.10 installed
[19:15] <BluesKaj_> have
[19:15] <Snowhog> BluesKaj_: I'm back on 14.04.1 on the 64-bit laptop.
[19:15] <Moter8> Getting http://i.imgur.com/tPQSdRW.png after restarting post-installation of plasma5.
[19:16] <Moter8> Any idea?
[19:16] <Moter8> google finds nothing
[19:18] <BluesKaj_> !plasma5 | Moter8
[19:18] <Moter8> BluesKaj_, Yes?
[19:18] <Moter8> that is the iso i used.
[19:19] <BluesKaj_> Moter8, maybe you could ask in #kubuntu-devel , Moter8
[19:19] <Moter8> i did, also in #plasma. channel seem dead on sundays
[19:21] <BluesKaj_> plasma5 is technically not our responsibility but since it falls under kde it's a grey area, but there aren't a lot of plasma 5 users in here, or developers either
[19:23] <Moter8> BluesKaj_, thanks
[19:24] <BluesKaj_> Moter8, I tried plasma5 3 times, finally gave up til it's much more mature ...lot of problems with it
[19:25] <Moter8> yup, had the same experience here
[19:25] <Moter8> kde fedora21 worked though
[19:25] <Moter8> still had issues, but it was fine
[19:25] <BluesKaj_> yes, so I've heard
[19:26] <BluesKaj_> not "hat fan" :)
[19:26] <Moter8> hat fan?
[19:26] <Moter8> eg fed redhat?
[19:27] <BluesKaj_> you got it :)
[19:39] <kikidee> I need to buy a flatbed scanner for home use, I have shortlisted "canon canoscan lide 110" and "HP scanjet 200". Which one works best in Kubuntu and is there any issues with these scanners
[19:44] <MoonUnit`> i have a lide 100, it works fine though a scanner gui shows scanning in a higher dpi then the scanners supports so it times out and i have to unplug/reinsert the usb to get it working again
[19:45] <lordievader> Good evening.
[19:46] <Moter8> oh Lovely, same bug as in kde/fedora21 :D
[19:46] <Moter8> http://i.imgur.com/62VhXZ4.png
[19:47] <kikidee> MoonUnit`: Its powered by usb  only?
[19:47] <MoonUnit`> kikidee, yup
[19:47] <kikidee> MoonUnit`: How long does it take to scan in the default dpi
[19:49] <MoonUnit`> no idea, not long, i'd have to boot back into kubuntu to time it.
[19:49] <kikidee> MoonUnit`: does it require any software to be install to use the scanner?
[19:49] <kikidee> *installed
[19:50] <MoonUnit`> think i had to install sane then a scanner app gui that supports sane.
[19:51] <kikidee> MoonUnit`: So no other specific stuff like the one needed for hp printers?
[19:51] <MoonUnit`> xsane gui most likely
[19:51] <MoonUnit`> no it was pretty easy
[19:52] <MoonUnit`> http://www.sane-project.org/sane-mfgs.html < show supported scanners
[19:53] <kikidee> MoonUnit`: ok, this fine if all the software comes from the ubuntu servers
[19:53] <kikidee> MoonUnit`: I checked that already
[19:53] <MoonUnit`> sane should be in the default repos
[19:53] <kikidee> MoonUnit`: canon's was supported but not hp's
[19:54] <kikidee> MoonUnit`: How is the scan quality, what about photos?
[19:55] <MoonUnit`> haven't really tried photos just documents, didnt see any difference between linux and windows.
[19:55] <kikidee> MoonUnit`: do you duel boot?
[19:55] <MoonUnit`> yup
[19:55] <kikidee> MoonUnit`: works on 8.1?
[19:57] <MoonUnit`> yes, windows 8.1 downloaded it's own driver then installed MP Navigator EX 2.0 from canon.
[19:57] <kikidee> MoonUnit`: ok, its canon canoscan lide 110 then
[19:58] <kikidee> MoonUnit`: Thanks
[19:58] <MoonUnit`> np
[20:07] <zebarbu> Hi all. I'm using plasma5 preview, works fine except I can't manage to configure khotkeys
[20:07] <zebarbu> I didn't find any "known problem" about this.
[20:09] <zebarbu> When I configure custom global shortcuts (for exemple Meta+F2 to start konsole), the configuration is well saved in .config/ related files, but the trigger seems voided AND when I come back to the configuration panel the shortcut is displayed to "empty"
[20:10] <zebarbu> (using the up-to-date plasma5 version, with locale set to "fr_FR.UTF-8", is this configuration matters
[20:25] <MoonUnit`> kikidee, booted into kubuntu, sane and skanlite (kde sane gui) was already installed, default dpi is 600, 8bit
[20:25] <kikidee> MoonUnit`: oh, test scanned?
[20:26] <kikidee> I mean to check the time for a scan to finish
[20:26] <MoonUnit`> will do
[20:27] <kikidee> MoonUnit`: nice
[20:27] <MoonUnit`> 34 seconds
[20:29] <kikidee> MoonUnit`: oh in 600 dpi?
[20:29] <MoonUnit`> yup
[20:30] <kikidee> then its true, I read in comments in a website that the scanner is little bit slow, what do you think
[20:31] <MoonUnit`> i don't use it often and its the only one i've owned, it serves my purposes.
[20:34] <MoonUnit`> 2 minutes 5 seconds at 1200 dpi
[20:35] <MoonUnit`> iirc it times out at higher settings
[20:36] <MoonUnit`> hmm maybe not, it might be working in 14.10, would take ages at 2400 though
[20:42] <kikidee> MoonUnit`: are you there?
[20:42] <MoonUnit`> yup
[20:42] <kikidee> MoonUnit`: Did you select color scan for all the tests?
[20:42] <MoonUnit`> yup
[20:43] <kikidee> MoonUnit`: Can you test a black and white scan at 600 dpi or some dpi that is good for ocr
[20:45] <MoonUnit`> back in windows atm and about to take a shower, will do it when i get back out
[20:45] <Moter8> gotta say, kubuntu's bug-reporter is awful.
[20:45] <kikidee> MoonUnit`: ok, thanks a lot for the support
[20:46] <kikidee> Moter8:  go to #kubuntu-devel and tell there
[20:47] <Moter8> > select a bug > click on reference this issue > nothing happens
[20:47] <kikidee> going for a reboot, brb
[21:10] <MoonUnit`> kikidee, do you want the scan in linux or will windows do?
[21:10] <kikidee> MoonUnit`: any where you like
[21:12] <MoonUnit`> when i did a scan on a dvd case i noticed windows was brighter by default.
[21:13] <kikidee> that is strange, how can a OS have an impact on the scan?
[21:13] <MoonUnit`> skanlite and brightness controls, must be post processing.
[21:14] <MoonUnit`> -and +has
[21:16] <kikidee> MoonUnit`: you mean skanlite dull the image because of a brightness setting?
[21:17] <MoonUnit`> kikidee, 16MB file, https://dl.dropboxusercontent.com/u/7618572/Canon_lide100_BW_scan.jpg
[21:17] <MoonUnit`> kikidee, by default brightness and contrast were at 0
[21:17] <kikidee> downloading the image
[21:19] <kikidee> MoonUnit`: scanned at 600 dpi?
[21:19] <MoonUnit`> yes
[21:20] <kikidee> MoonUnit`: can you get me a color scan?
[21:20] <MoonUnit`> sure
[21:21] <kikidee> thanks
[21:23] <MoonUnit`> kikidee, 32MB, https://dl.dropboxusercontent.com/u/7618572/Canon_lide100_Colour_scan.jpg
[21:23] <kikidee> downloading
[21:27] <kikidee> MoonUnit`: the scans are very good
[21:28] <MoonUnit`> yup
[21:29] <kikidee> MoonUnit`: How long have you been using this scanner?
[21:30] <MoonUnit`> bought it in 2008
[21:30] <kikidee> wow, still works?
[21:31] <MoonUnit`> must have been a bargain email says it cost £34
[21:31] <kikidee> I have a new respect for canon
[21:31] <MoonUnit`> yup still works but then i use it little
[21:31] <kikidee> little=weekly?
[21:32] <MoonUnit`> keep it in a bag when i dont use it to keep the dust out
[21:32] <MoonUnit`> perhaps a few times a year.
[21:32] <kikidee> oh
[21:33] <kikidee> I have a lot of photos to scan and I am little bit worried because of the scan speed, have to scan 4 big albums of photos
[21:34] <kikidee> but to cost and the scan quality is very attractive
[21:34] <kikidee> but and ...
[21:34] <kikidee> I must be half sleeping
[21:34] <kikidee> sorry for the typos
[21:38] <kikidee> MoonUnit`: the cost is very less and the scan quality is very good. I will look at other details and buy it. Thanks a lot for the scans. Good night
[21:38] <MoonUnit`> glad to help kikidee, good night.
[22:47] <AssociateX> How can I get online cli?
[22:48] <AssociateX> eth0, btw.
[22:48] <AssociateX> I tried dhcpd but that must not be installed.
[22:50] <teward> AssociateX: manually create static settings, perhaps?  Pastebin what you've got in /etc/network/interfaces if you don't mind, and make sure eth0 is detected correctly.
[22:50] <teward> assuming eth0 is an ethernet
[22:53] <AssociateX> auto lo
[22:53] <AssociateX> iface lo inet loopback
[22:53] <Guest92489> Does anyone here have an issue with bluetooth in kubuntu 14.10
[22:54] <Guest92489> I've been trying since K12 and no matter what I try it never connects
[22:54] <AssociateX> teward^^^
[22:55] <AssociateX> teward eth0 is my connection and it is ethernet.
[23:01] <AssociateX> ifconfig eth0 up & dhcpd used to get me online. How do I do it now?