/srv/irclogs.ubuntu.com/2014/11/25/#ubuntu.txt

grySnwspeckle: that's a different error now. What did you change? And would you like to install it from the repositories, or by hand?00:01
Snwspecklegry, It's the same error I seem to be getting before I rolled to my backup. In terms of installing, I am downloading the binaries and running its installer00:02
teaearlgraycoldIs there a distro I should be using for an HTPC?00:02
bazhangteaearlgraycold, like ubuntu mythtv?00:03
teaearlgraycoldbazhang, what's MythTV add to Ubuntu?00:04
Lilith23 Watch Me Suck Real Big Dick On My Site http://bitly.com/1nx3K4c00:04
k1lobviously dont click on that spam link :)00:05
teaearlgraycoldWow, porn spam in IRC?00:05
teaearlgraycoldFirst time for me00:05
bazhangteaearlgraycold, when you say htpc how involved are you wanting00:05
teaearlgraycoldbazhang, well honestly I'm probably just going to have it autolaunch XBMC :P00:06
teaearlgraycoldI'm not using optical media or a TV tuner00:06
bazhangteaearlgraycold, so lubuntu, to save on resources00:07
bazhang!lubuntu | teaearlgraycold00:07
ubottuteaearlgraycold: lubuntu is Ubuntu with LXDE instead of !GNOME as desktop environment, which makes it extremely lightweight. See https://wiki.ubuntu.com/Lubuntu - /join #lubuntu for lubuntu support.00:07
teaearlgraycoldbazhang, alright. Will that have compositing though? Don't I need compositing to prevent video tearing?00:07
bazhang!info mythbuntu-desktop | teaearlgraycold00:07
ubottuteaearlgraycold: mythbuntu-desktop (source: mythbuntu-meta): The Mythbuntu standalone system. In component multiverse, is optional. Version 0.83 (utopic), package size 3 kB, installed size 30 kB (Only available for i386; amd64; powerpc)00:07
teaearlgraycoldYeah it's a 2GB machine00:08
teaearlgraycoldSo maybe that's best00:08
Juniorhello, good night00:08
JuniorI cannot boot ubuntu from usb flash drive00:08
Juniormy notebook is LG SlidePad 200:09
bubbasauresJunior, How did you load ubuntu to the usb?00:09
JuniorI tried to use unetbootin, rufus and universal usb installer00:09
JuniorI alo disabled secure boot00:09
Junioralso*00:09
Tintle_STOP00:10
bubbasaures!uefi | Junior00:10
ubottuJunior: UEFI is a specification that defines a software interface between an operating system and platform firmware. It is meant as a replacement for the BIOS. For information on how to set up and install Ubuntu and its derivatives on UEFI machines please read https://help.ubuntu.com/community/UEFI00:10
k1lJunior: is it a arm device?00:11
Juniorubottu, I followed the instructions on that site00:11
ubottuJunior: I am only a bot, please don't think I'm intelligent :)00:11
Guest40659Please don't play with my bot00:13
Guest40659It is not a game, potato00:13
=== Guest40659 is now known as Tintle
k1lTintle: stop that. no bots in here. and you are not allowed in here now too00:14
grySnwspeckle: Remind me 1) why you're not using it from the repos, 2) what you're doing differently that wouldn't put you in the same situation?00:21
grySnwspeckle: and am I correct that you started getting a different error ('not installed' instead of 'file not found') after you rolled back the backup?00:21
Snwspecklegry, I am just skipping over it. I think its an install problem according to some ppl. All is well ! :)00:21
gryhow do you define "skipping over"? you doing it again without identifying the problem sounds ungood to me. rolling back to backups instead of learning is not good.00:22
=== CyberJacob is now known as CyberJacob|Away
Snwspecklegry, I just cant run ejabberdctl commands from anywhere but if I point to ejabberdctl directly it works okay00:22
grySnwspeckle: you didn't answer -any- of the questions I asked00:24
grySnwspeckle: what is your native language?00:24
Snwspecklegry, After rolling back I do not seem to be getting any file not found errors, only the not installed error. And english.00:25
grySnwspeckle: ok. now you should install I suppose. how are you doing this, and why - from the repos or by hand?00:28
mazertmHi. im runing ubuntu 14.10 utopic - 3.16.0-23-generic: runing command 'nethogs version 0.8.0' give me this error: "nethogs: cui.cpp:416: void do_refresh(): Assertion `pwuid != 0' failed." what are causing this ?00:29
Snwspecklegry, I download the binaries from here (http://www.process-one.net/en/ejabberd/downloads/) and use execute the binaries. The packages on apt-get are not update and severly out of date.00:29
david_někdo CZ/SK?00:29
egregiushey guys00:29
egregiusmy linux mint update cums back with errors everytime00:29
k1l!cz | david_00:29
ubottudavid_: České uživatele žádáme, aby mluvili v kanále #ubuntu anglicky. Česky je možno se domluvit v #ubuntu-cz. Děkujeme.00:29
egregiussay there is connection errorz00:29
k1legregius: so please ask the mint guys00:29
k1l!mint | egregius00:29
ubottuegregius: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org00:29
egregiuswhy isnt it supported?00:30
k1lwhy did you not install ubuntu if you want support in this channel? please dont make a drama and ask the mint support.00:30
egregiusdo you think all the nigs are gunna go crazy in fergison?00:31
grySnwspeckle: ok. I see http://www.process-one.net/docs/ejabberd/guide_en.html#htoc5 «To start and stop ejabberd manually, use the desktop shortcuts created by the installer. If the machine doesn’t have a graphical system, use the scripts ’start’ and ’stop’ in the ’bin’ directory where ejabberd is installed.», hope it is of help. As mentioned earlier you should be able to add the binary directory ..00:33
SnwspeckleAh I didnt see that! Thanks, that explains a lot... lol00:33
Wamphyrik1l, oh oh oh can i get one of those to??? :D00:34
NuClEaRbLaStive got a directory with 700 permissions. when i do chmod 755 on it, im just returned to the command prompt as if the command executed successfully, but the directory permissions are still 700. any ideas?00:34
grySnwspeckle: ...to PATH. https://help.ubuntu.com/community/EnvironmentVariables#A.2BAH4ALw.profile (except your directory would not be $HOME/MyPrograms, it would be something else.00:34
grySnwspeckle: )00:34
=== johnlage_partyha is now known as johnlage
mazertmHi. im runing ubuntu 14.10 utopic - 3.16.0-23-generic: runing command 'nethogs version 0.8.0' give me this error: "nethogs: cui.cpp:416: void do_refresh(): Assertion `pwuid != 0' failed." what are causing this ?00:41
Snwspecklegry, One thing that batters me in ejabberd is that it stores passwords in plain text! It is so sooo stupid!00:41
nmatrix9Hello all00:49
nmatrix9Anyone able to successfully install nvidia drivers on their box and get a dual monitory system set up?00:49
nmatrix9Extended desktop?00:50
nmatrix9This is for Ubuntu 14.0400:50
squintynmatrix9:  it is better to just state your exact problem rather than "anyone able....." etc.  if someone can help they will reply00:52
nmatrix9squinty, I've managed to get my dual monitor setup with NVidia drivers 331 but my second monitor, I simply cannot change the resolution from 800x600 to anything higher.00:54
k1lhow its connected? with a adapter?00:55
nmatrix9squinty I've tried changing the settings in the nvidia x server settings utility.00:55
nmatrix9k1l, Was that question for me?00:56
k1lnmatrix9: yes00:56
k1ltoo slow resolution sounds like monitor is not authentificated properly00:58
nmatrix9k1l, not sure I understand your question but both monitors are directly connected via dvi to my Geforce GTX 550 Ti00:58
rootBrazilians here?00:58
in_deep_thoughtwhat is the name of the RandR extension that I need? sudo apt-get xrandr doesn’t seem to work. It can’t find the package00:58
=== root is now known as Guest37974
k1l!br | Guest3797400:58
ubottuGuest37974: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br " sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigada.00:58
nmatrix9k1l, I had my dual monitor setup working under 12.0400:59
nmatrix9k1l, both monitors running under same resolutions00:59
k1lnmatrix9: ok. no cable adapter like from vga->hdmi or such. but if it worked before00:59
rnomI need some help using -exec with find. I'm trying to move files in {}/* to {}/../ (everything in a subdirectory up a level). This is my command that is failing: find . -type d -mindepth 3 -exec mv '"{}"/*' '"{}"/../' \;00:59
k1lnmatrix9: driver loaded propperly?01:00
squintynmatrix9:  if applicable try renaming xorg.conf to something else and then try nvidia x server settings again.  an old xorg.conf might be causing a conflict...just a thought01:00
aduhey01:01
nmatrix9k1l, how can I tell if it's loaded properly or improperly?01:01
loki__hello guys, if i have dev dir under chroot with files like urandom, i can delete this folder safe?01:02
nmatrix9k1l, I mean Iam logged into Kubuntu desktop everything is almost perfect except for the fact that my second monitor is stuck at 800x60001:02
aduMy laptop just froze during boot it says "[    4.9...] input: CyPS/2 Cypress Trackpad as ..."01:02
aduany pointers?01:02
k1lnmatrix9: "lspci -nnk | grep -i vga -A3:"01:02
loki__such files http://pastebin.com/mWD1ER5t01:03
loki__can i delete them?01:03
nmatrix9squinty, I tried that last night xorg.conf.new  to /etc/X11/xorg.conf but I think I broke something cause even though I got X I no longer had dual monitor support01:03
squintyin_deep_thought:  see if arandr suits your needs.    apt-cache show arandr   for details01:03
nmatrix9k1l, getting grep: 3:: invalid context length argument01:05
k1lnmatrix9: oh scratch that last :01:06
NuClEaRbLaStfinally samba is working01:06
NuClEaRbLaSttaking a long time to copy data over the network on n150 wireless. thinki i need a gagabit switch01:06
Wamphyrik1l, i think unity has a issue with some generic mice01:07
nmatrix9k1l, looks like it is in use  "        Kernel driver in use: nvidia01:07
nmatrix9"01:07
squintylady gagabit switch?  ;-)01:07
NuClEaRbLaStthat would be awesome01:07
k1lnmatrix9: ok01:07
rnomcan anyone help with find -exec?01:07
daftykinssquinty: so punny :D01:07
squinty:)01:07
NuClEaRbLaStthe lady gagabit switch, where no port goes unused01:08
akiva-thinkpadwhats a linuxy term for "moderation tools"01:08
NuClEaRbLaStadministration tools?01:08
akiva-thinkpadyah; just something that has a linuxy feel01:08
akiva-thinkpadsay if your a sysadmin or something01:09
k1l!ot | akiva-thinkpad01:09
ubottuakiva-thinkpad: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!01:09
akiva-thinkpadk1l, on topic. I'm editting the ubuntu subreddit.01:09
NuClEaRbLaStsee how warm and welcoming it is01:09
k1lakiva-thinkpad: no, "some linuxey words" are not ontpoic. please put that into the offtopic channel, that is for chitchat. thanks01:10
akiva-thinkpadikr?01:10
rnomtrying `-exec mv "{}/*" "{}/../"` but it tells me no such file or directory01:10
akiva-thinkpadk1l, some ubuntu -y words01:10
in_deep_thoughtsquinty: arandr installed without fail but I still get the same RANDR extension is not present error01:10
NuClEaRbLaStthat was a douche move01:11
squintyin_deep_thought:  if using lubuntu see if lxrandr is installed.  or you can also see if any of the randr packages are installed   aptitude search xrandr | grep -i "i  "  or  dpkg -l | grep xrandr  etc.  could also check in Synaptic Package Manager (if you have it installed)01:16
akiva-thinkpad!revenge | k1l01:17
akiva-thinkpadmwa ha ha01:17
akiva-thinkpadI got my revenge01:17
* akiva-thinkpad is done01:17
in_deep_thoughtsquinty: I seem to have a lot of libxrandr packages01:19
in_deep_thoughtlibxrandr2 even is listed as an Randr extension library01:19
in_deep_thoughtbut this doesn’t count when trying to adjust my display settings?01:19
rnomis there a better channel to ask questions about gnu find?01:21
JavaJoshI'm trying to install ubuntu for a new linux user at work. I have tried this with the Ubuntu Startup Disk Creator and Unetbootin. When I boot his laptop from the USB stick, I see the grub menu flash, then I'm staring at a black screen. That is as far as I can get :(. any help would be great!01:22
daftykins!nomodeset | JavaJosh assuming it was made from a good download of the ISO01:22
ubottuJavaJosh assuming it was made from a good download of the ISO: A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter01:22
in_deep_thoughtis there perhaps a “driver manager” I can install to manage my drivers so that I can remove them if I want to?01:24
JavaJoshubottu: I am familiar with this, but the grub menu appears for a millisecond. I can't enter that information01:24
ubottuJavaJosh: I am only a bot, please don't think I'm intelligent :)01:24
in_deep_thoughtwhat is the name of such a manager01:24
sloantothebone!revenge | sloantothebone01:25
sloantothebone!lol | sloantothebone01:25
squintyin_deep_thought:  search for Additional Drivers  (might be under Software and Updates)01:26
k1lrnom: maybe the bash channels? or if there is a gnu related channel?01:26
k1l!alis | rnom01:26
ubotturnom: alis is a services bot that can help you find channels. Read "/msg alis help list" . For more help or questions relating to alis, please join #freenode. Example usage: /msg alis list #ubuntu* or /msg alis list *http*01:26
nmatrix9k1l, if there was some sort of way to edit the .conf file to accept resolutions higher than 800x600 that would be cool too.01:26
sloantothebonealis: hello?01:27
squintynmatrix9:  more than likely the xorg.conf is not needed.  did you try renaming it and then rebooting. once rebooted, try nvidia x-server settings and Displays again01:28
in_deep_thoughtsquinty: I do have that. However it only seems to list additional drivers and give the ability to activate or deactivate them. not remove them01:28
martapyHi guys. I need help. I can't login to ubuntu 14.04 because it says "failed to start session". Before this, I did apt-get update, apt-get upgrade, and apt-get dist-upgrade.01:28
sloantotheboneMy battery icon is still frozen. Do you guys know any package that has something to do with the batteries that I can reinstall?01:28
martapynow i can't login01:29
daftykinssloantothebone: what did you try? "still" ?01:29
sloantotheboneI thought it might be some random glitch but it's still frozen01:29
k1lmartapy: log into tty and see if .Xauthority belongs to root:root or user:user01:30
martapyi can login to tty with the same username and password01:30
squintyin_deep_thought:  afaik, unselecting a driver via the Additional Drivers will remove said driver (and either the system will revert to the open source driver or another driver can be selected from the driver listings).01:31
martapyk1l: how do i check if .Xauthority belongs to root or user?01:31
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
squintymartapy:  maybe try accessing a previous kernel from the grub boot menu... see if it will boot into your desktop then.01:32
in_deep_thoughtsquinty: ok so I deactivated all video drivers. Now I want to be able to use xrandr. How would I activate that one, seeing as its already installed (aRandR)01:32
OhneBrandonI have Ubuntu 14.10. I mounted a .ISO with the "sudo mkdir /media/iso" and "sudo mount -o loop <path>.iso" commands. When I restarted my computer, every file and folder is read only. Does anyone know how to fix that?01:33
daftykinsmartapy: logged in at the TTY, run "ls -al ~/" and look who owns .Xauthority01:33
nmatrix9squinty, ok will do01:34
martapydaftykins: .Xauthority belongs to user01:34
ubuntuaddictedanyone else have an issue where sometimes there usb mouse or keyboard doesn't work after a new system boot up?  it's weird, sometimes it registers and sometimes it doesn't so i have to unplug it and plug it back in and it works just fine. thoughts?01:34
k1lmartapy: sorry, yes ls -al will show owners. if its user:user that is right. and we need to see for another solution01:35
martapyk1l: it belongs to me (user).01:35
martapyk1l: i tried reinstalling the ubuntu-session and ubuntu-desktop, but it says "The following packages have unmet dependencies"01:36
=== barb is now known as Guest27612
spelterCan ubuntu read ext partitions? I am trying to cp a flavor of linux from a HD taken form a WD hard drive and OSX will not allow this.01:38
spelter*WD mycloud router01:38
daftykinsspelter: Linux distros use ext file systems, so yeah - it can read it01:39
daftykinsspelter: you want to clone from disk to disk? clonezilla. bootable debian ISO.01:39
spelteryes Id like to save it for later use01:40
maslauskasyo yo yo01:40
daftykinsspelter: so you're making a backup image?01:40
daftykinsclonezilla will do that too.01:40
=== Joshua^Dunamis_i is now known as Joshua^Dunamis
spelterwell I want to nuke the disc then partition it to my liking. Put the RouterOS back on so the WDmycloud is much smaller and I can use the other partitions for better purposes01:42
k1lmartapy: what errors?01:42
Ranieri_Yo ubuntu, how do I change the file permissions so that I am the sole person that can read/write to /home/rob and every directory/file in it.01:42
Ranieri_k1l: ^^^^01:43
martapyk1l: it says "The following packages have unmet dependencies"01:43
k1lRanieri_: no need for extra highlighting me for your macOS issue.01:44
Ranieri_k1l: :O, how did you know#?01:44
k1lmartapy: so you have PPAs installed?01:44
martapykil: i don't know if i have the ppas installed01:45
k1l!paste | martapy put the errors there please01:47
ubottumartapy put the errors there please: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.01:47
aurorauserGot a weird issue. working on a machine, currently has a Raid10 MDADM array. /dev/md0 is formatted as ext3, is mounted within the filesystem, am able to see all the data inside the mountpoint.01:53
aurorauserhad 6 drives total, and I had to fail 2 drives out. Raid status clean, but degraded01:54
aurorauserthis array doesn't have any partitions within its drives01:54
aurorauserit looks like it was created with /dev/sda /dev/sdb, etc and not /dev/sda1 and /dev/sdb101:55
aurorausersince theres no partitions, I can't copy the partition table to the new drive01:55
aurorauserand now when I add the disk to the array, it doesn't rebuild the drive in, it just adds it as a spare01:55
aurorauserand blkid shows "linux_raid_member" for the drives01:56
nmatrix9k1l, no progress made I still can't change the resolution of my second monitor.01:56
daftykinsaurorauser: not used software RAID, but if you get nothing here try #ubuntu-server also01:57
aurorauserdaftykins: thanks01:58
=== aurorauser is now known as DanaM
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
=== Tokyo is now known as Zachary_DuBois
harry_goodmorningeverybody02:05
k2gremlinSup all, Anyone got a moment to help me with a fresh install problem?02:08
tmswaht kind of problem?02:08
k2gremlinWell first thing I did when I installed Ubuntu on a VM is setup the network/interfaces file..02:09
k2gremlinNow it will not resolve out..02:09
harry__nog iemand wakker hier02:09
daftykinsk2gremlin: pings to internet hosts but no DNS huh?02:09
k2gremlinYea.. just changed the network adapter on the VM... booting now02:10
k2gremlinnope wasnt the adapter02:11
daftykinsk2gremlin: what virt tech is this?02:12
k2gremlinesxi02:13
daftykinsyou know about resolvconf?02:13
k2gremlinyea but it says its updated dynamically so dont write there...02:13
iKlsRhi, i installed libunity-dev but when I include <unity.h> it says cannot find02:19
iKlsRwhere would the header go?02:20
k2gremlindaftykins, Yea I can't even apt-get update lol02:20
daftykinsk2gremlin: alright so can you share what you put in interfaces?02:20
w00terfergison verdict02:21
w00terwhos listening?02:21
compdocyou02:21
daftykinsw00ter: you're welcome to discuss it in #ubuntu-offtopic02:21
w00terty02:21
k2gremlindaftykins, http://pastebin.com/E5xxWQPG02:22
orlockMy xterms keep locking up, and have to be killed02:23
orlockthe close window "X" doesnt work02:23
orlockUbuntu 14.04 lts02:24
orlocki guess its likely to be whatever nvidia driver Ubuntu comes with?02:24
daftykinsk2gremlin: that looks fine, so if you "ping 8.8.8.8" right now it's working fine?02:25
k2gremlinWhen I attemot to edit the resolv file it says in all caps do not edit by hand. file will be overwritten02:25
k2gremlinYes02:25
k2gremlinI can ping out02:25
squirtle_51I run Ubuntu Mate. I set up a  custom shortcut so that  it executes "mate-screenshot -a". It worked fine until a day or so ago. I checked my custom shortcuts and it's still there. Any idea why it doesn't work now?02:25
k2gremlinbut DNS is not resolving.. so even the basic apt-get update fails02:25
daftykinsk2gremlin: remove the package 'resolvconf', reboot and log back in... put "nameserver 8.8.8.8" or whichever is your favourite in /etc/resolv.conf then run apt-get update02:26
k2gremlinhow do you remove that package?02:26
k2gremlindaftykins, still kind of new to CLI only lol02:26
daftykinsk2gremlin: sudo apt-get purge resolvconf02:26
atlas-hivehello all =)02:26
k2gremlinunable to locate package..02:26
=== max is now known as Guest90894
usr13k2gremlin: Just edit /etc/resolv.conf and change nameserver to 8.8.8.802:28
k2gremlindaftykins, Ok its working now. Will these changes stick through reboots and shutdowns?02:28
daftykinsk2gremlin: yep without resolvconf on it won't fight the file, as long as you rebooted between removal and edit02:29
daftykinsk2gremlin: give it another reboot to test for sure though02:29
=== avoivder is now known as avoider
k2gremlindaftykins, Ok im testing after reboot now lol02:29
k2gremlindaftykins, No failed to fetch again lol02:29
daftykinsk2gremlin: hrmm are you sure you followed my advice? you can also declare nameservers in the interfaces file02:30
daftykinsi must sleep now though, so good luck02:30
k2gremlinok02:30
k2gremlinnameser 8.8.8.8 right below gateway?02:30
daftykinsi don't know the name in interfaces off-hand unfortunately02:31
k2gremlinthis? dns-nameservers 66.212.63.228 66.212.48.1002:31
k2gremlinfor example?02:31
avoider4.4.4.402:32
avoiderisnt it02:32
k2gremlinwell yea any dns will work :)02:32
k2gremlinyay it worked :P02:33
k2gremlinthanks all02:33
avoider4.4.4.4?02:33
k2gremlin8.8.8.8 lol02:33
avoiderk02:33
avoiderwell02:33
avoiderthats google02:33
k2gremlinYep. I use it on my home systems as well02:34
k2gremlinreliable02:34
avoideryeah i know02:34
avoideri was just informing you .02:34
avoiderit was google02:34
avoiderlol02:34
avoiderincase you didnt know02:34
avoideris all02:34
avoiderwell that its reliable... .how often do you see google down02:35
avoider;p02:35
k2gremlinexactaly :P02:35
avoiderUnless someone is pushing massive GBPS02:36
avoiderwill always be up02:36
WillW__Hi folks, I'm trying to get a monitor working with Ubuntu and an NVIDIA card, but the monitor does not report supported resolutions, so I'm trying to set custom ones(that I know to work on this monitor). So far, I've set nvidia-331 under additional drivers, successfully created resolutions with xrandr --newmode, but on xrandr --addmode, I get the following error: http://pastebin.com/4mVNd0EA02:36
avoider!nvidia02:37
ubottuFor Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto02:37
avoiderwillw__  look that that link02:37
avoiderAnd let me know if you still need help02:37
WillW__avoider thanks, I shall02:38
avoiderUbuntu ushally pretty good with detecting hardware02:38
avoideron install02:38
orlockWillW__: so broken DDC autodetect?02:38
avoiderI run after market nvidia gpu and didnt need to install anything.02:38
WillW__oh no, this is a monitor with a bypass board. Nothing wrong with ubuntu02:39
orlockavoider: he's not having problems with his nvidia card, its his screen02:39
avoiderorlock: yeah i read wrong02:39
avoidermy mistakes02:39
orlockWillW__: so conencting via RGB?02:39
WillW__for reference, the monitor is a catleap q27002:39
WillW__DVI-D dual link02:39
ralph4100hey guys - if you were around earlier, I got past the efi issue and ubuntu is installed and I get into efi grub and it starts to boot. however then I end up in busybox.02:39
orlockWillW__: i used to mod old unix workstation displays so i could drive them via a PC card, had to solder on BNC connectors and resistors, fun02:40
ralph4100my question is - I am in live cd and I have mounted my installed ubuntu - I have read that I likely need new nvidia drivers ... can I install them from within the live cd?02:40
WillW__orlock, I hope I don't have to do any of that....02:40
ralph4100or - do I need to do it from busybox console02:40
orlockWillW__: Nah, this was like, 10 years ago :)02:41
orlockWillW__: http://ubuntuforums.org/showthread.php?t=203899702:41
ralph4100WillW: this is what I was looking at - http://askubuntu.com/questions/272570/unable-to-install-ubuntu-on-lenovo-y50002:43
ralph4100fyi02:43
WillW__orlock, is that post up-to-date?  On my last ubuntu install trying to use this monitor, modifying X11 did not work, because as I recall, nvidia drivers overwrite it or something like that02:43
orlockWillW__: oh - *shrug* then02:43
cloudbudI have created a sudo user in ubuntu but he is not able to write to the dire /var/www/*. how can i give me write priveleges to the user ?02:44
ralph4100ok but can I install drivers on the mounted install? or do I need to actually be running that install?02:44
ralph4100If I run the bash script on the mounted install - will that install it there?02:44
orlockWillW__: I'm only here because my goddamn xterms are locking up daily02:44
OhneBrandonI have Ubuntu 14.10. I mounted a .ISO with the "sudo mkdir /media/iso" and "sudo mount -o loop <path>.iso" commands. When I restarted my computer, every file and folder is read only. Does anyone know how to fix that?02:51
squirtle_51Any idea why my custom prtsc shortcut doesn't allow me to select an area and instead just takes the whole screen?02:51
orlockOhneBrandon: Its an ISO file02:51
orlockOhneBrandon: it is read only02:51
squirtle_51Never mind....I'm dumb and just answered my own question....02:52
OhneBrandonorlock, my entire / is read only after mounting the iso and restarting my computer. I probably should have wrote that better.02:52
orlockOhneBrandon: Oh.. Bugger.02:52
orlockthats very odd then02:52
orlockcheck your mounts? not mounted ro?02:53
OhneBrandonYeah, that's the first time it happened to me too.02:53
=== doebama is now known as william_doe
orlocki've seen that happen due to disk issues i think02:53
orlockbut it normally bounces you to the file system check02:53
OhneBrandonIt lets me log in and do everything that doesn't require writing to the disk.02:53
=== memand is now known as Guest88338
jasonnicholsonhello02:55
jasonnicholsonI have a question02:56
PlasticPiI have an answer. Let's see if they match.02:57
jasonnicholson:)02:57
jasonnicholsonI am having trouble connecting to local webpages02:57
jasonnicholsonfor instance http://jhnlt001/cgi-bin/dwww/usr/share/doc/debian/constitution.txt.gz?type=text/plain02:57
jasonnicholsonI am getting "Not Found" errors in the web browser02:58
appleguruare there any good solutions for managing FTP + SFTP user logins to a ubuntu server?02:58
appleguruI'm looking for a way to easily create and manage logins, passwords, and accessible directories02:59
appleguruthat applies to both traditional FTP users as well as SSH/SFTP users02:59
appleguru(same credentials for both)02:59
jasonnicholsonHow do I troubleshoot these "Not Found" errors?02:59
jironjasonnicholson: what web server are you running?03:00
jasonnicholsonapache 2.4.703:00
sloantotheboneMy battery icon is frozen, it is my fault, and worst of all it is a problem that no one has ever had. :(03:00
applegurujasonnicholson: tail -f /var/log/apache2/error.log03:00
PlasticPijasonnicholson: is jhnlt001 something in your /etc/hosts file?03:00
=== jamesarnett is now known as YeOldScallywag
jironjasonnicholson: anything in logs?03:01
jasonnicholsonLast entry was on Sunday03:02
jironI guess I'd start with the root - see if you can get a file there03:03
jironsorry, by 'root' I mean the root of the web server03:04
atlas-hivedoes anyone knkow some really good irssi themes?03:09
atlas-hivemaybe a little off topic03:09
jasonnicholsonSorry for the delay03:10
jasonnicholsonThere is no helpful information currectly in the /var/log/apache2/error.log03:11
jasonnicholsonI am unable to access local websites but the nothing is written to the erro log03:11
jasonnicholsonerror.log03:11
appleguruwhat about the access log, anything in there?03:12
rslarsonHey guys dumb question (I know you can beat me later)03:12
appleguru /var/log/apache2/access.log03:12
jasonnicholsonI will check appleguru03:13
rslarsonI need to boot into single user mode on a UEFI system and I cannot stop the GRUB boot process to append 'single'03:13
rslarsonwhat am I doing wrong?03:13
rslarsonbackstory: used wrong 'g' in usermod now I cant sudo03:14
jasonnicholsonYes appleguru03:14
jasonnicholsonThe access log is showing "GET" requests03:14
Bashing-omrslarson: A couple of ways, From the grub boot menu -> advanced options, recovery -> enable networking -> resume normal boot , OR from that grub boot menu add the boot parameter to the kernel boot line.03:15
cloudbudHi  I am new to linux, when I typed "vi FILE1" I was able to open VI editor. I added some data and I want to save the file and I tried :w but it threw me an error.   "file1" E212: Can't open file for writing Press ENTER or type command to continue  why I am not able to save it?   I read it some where that I need permissions for that. While installing ubantu... I created and User and password with which I login.  Wont that user have03:17
cloudbud do to go further?03:17
applegurucloudbud: where are you trying to save the file?03:18
appleguruif in your home directory or somewhere else your user has write privy for, you should be able to save it no problem03:18
cloudbudappleguru : i am writing some data. i have granted sudo access to user03:18
cloudbudim writing to /var/www/*03:19
applegururun "sudo vi FILE1"03:19
cloudbudappleguru : how to resolve this03:19
cloudbudappleguru  : it ask for password always03:19
applegurucorrect03:19
appleguruenter your user password03:19
cloudbudappleguru : but is it required ? cant i grant him write access to the file03:20
applegurucloudbud: you can...03:21
cloudbudappleguru : how03:21
appleguruyou could "sudo chmod 777 FILE1"03:22
appleguruwhich would give everyone read/write/execute privileges for that file03:22
appleguruthat isn't the recommended approach though03:22
cloudbudappleguru : what is the best approach03:22
appleguruI would create a new group03:23
=== Joshua^Dunamis_i is now known as Joshua^Dunamis
appleguruand add www-data and the users you want to write the web files to that group03:23
jasonnicholsonI figured my problem03:23
jasonnicholsoncgi was not enabled03:24
appleguruthan chown /var/www to that group03:24
jasonnicholsonsudo a2enmod cgi03:24
jasonnicholsonsudo service apache2 restart03:24
jasonnicholsonnow it works03:24
jasonnicholsonthanks for the help with logs03:24
cloudbudappleguru : can u tell me the exact commands03:24
applegurucloudbud: what is the name of the user you want to have access?03:27
XeBlackWatercan I install ubuntu on my tablet?03:28
somsip!touch | XeBlackWater03:28
ubottuXeBlackWater: Information about the Ubuntu Touch platform for Phone and Tablet is available here https://wiki.ubuntu.com/Touch . Support and discussion in #ubuntu-touch03:28
XeBlackWaterok, thank you03:29
sp00n3rm4nHow does one restart an xfce-session without rebooting?03:31
sp00n3rm4nI'm getting a display error.03:31
sp00n3rm4nNot error, really, but my res has plummeted.03:31
sp00n3rm4nSo I want to reload my graphical shell.03:32
waressearcher2I rebooted PC and now I can't mount nfs partition, it says: "mount.nfs: access denied by server while mounting", its strange I rebooted so much time before but now it doesn't mount03:33
applegurucloudbud: sudo adduser MyUser www-data03:34
applegurusudo chgrp -R www-data /var/www/*03:34
applegurulogout, log back in03:34
applegurushould be good to go03:34
somsipcloudbud: also, sudo chmod g+s /var/www (which will ensure any new files have group access)03:35
cloudbudokay let me check03:35
grytry file:///usr/share/doc/debian/constitution.txt.gz ?03:35
gryechan03:35
somsipcloudbud: sorry, chmod -R g+s /var/www03:36
chuanyu2015没人03:37
somsip!zh | chuanyu201503:37
ubottuchuanyu2015: 如欲獲得中文的協助,請輸入 /join #ubuntu-cn 或 /join #ubuntu-tw03:37
chuanyu2015join #ubuntu-cn03:37
appleguruso.. no good solutions for managing FTP + SFTP user logins to a ubuntu server?03:37
chuanyu2015haha03:37
atlas-hivewhat does chmod -R g+s do/03:38
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
somsipatlas-hive: makes any new file/dir have the same group settings as the parent03:38
somsip/s/settings/permissions03:38
atlas-hiveah gotcha thanks =)03:39
atlas-hivei havent really worked with chmod all that much03:39
somsip!permissions | atlas-hive03:39
ubottuatlas-hive: An explanation of what file permissions are and how they can be manipulated can be found at https://help.ubuntu.com/community/FilePermissions03:39
waressearcher2there is that distro called "sabayon" so that fall they discontinued their 32bit released in favor of only 64bit ones they say 32bit architecture is obsolete now, what about ubuntu, for how many years there will be 32bit releases ?03:43
=== Joshua^Dunamis_i is now known as Joshua^Dunamis
=== Dr_Manhattan is now known as DrManhattan
rob__irc04:01
=== ei is now known as ei3
majedHi, when I do "sudo update-manager" I get "Fatal Python error: Py_Initialize: Unable to get the locale encoding Traceback (most recent call last):   File "/usr/lib/python3.4/encodings/__init__.py", line 31, in <module> ImportError: No module named 'codecs'"04:06
schultzais ubuntu still limiting our control over where the minimize,maximize,close buttons are in 14.10?04:07
majedHi, when I do "sudo update-manager" I get "Fatal Python error: Py_Initialize: Unable to get the locale encoding Traceback (most recent call last):   File "/usr/lib/python3.4/encodings/__init__.py", line 31, in <module> ImportError: No module named 'codecs'"04:10
=== badon_ is now known as badon
majeddo you think if I reinstalled python that will fix it ?04:12
majedI guess they are sleeping LoL .Wrong timing . I'll try to come later .I'm serious I appreciate the IRC nation <304:15
schultzadid you edit __init__.py04:15
majedno04:15
schultzaim still looking04:15
schultzaOn *nix, also make sure that PYTHONPATH is configured correctly, esp that it has the format:  .:/usr/local/lib/python04:16
majedschultza: thanks a lot brother04:16
majedschultza: how to do that ?04:17
schultzafirst, find out what PYTHONPATH is set to by going to the terminal and typing in "sudo set"04:17
schultzaI need another IRC client, this multiline editor drives me nuts.04:18
majedI get "sudo: set: command not found"04:19
schultzaum... hang on04:19
schultzasudo -i04:21
schultzathen "set"04:21
schultzaor rather... "set | grep PYTHONPATH"04:21
zykotick9schultza: that'll be for the root account.  wouldn't just "set" work?04:21
schultzahe's running the command "sudo update-manager" and thats where hes getting the error...04:21
schultzaso, i mean "sudo -i"04:22
schultzathen "set | grep PYTHONPATH"04:22
zykotick9schultza: i get no result from that.  do you?04:23
r0t0reverything i try to install with apt-get this is the error http://paste.ubuntu.com/9225868/04:23
majedI get no result from that too04:23
zykotick9r0t0r: mixing release/distros perhaps?04:24
ralph4100just installed ... I can pick ubuntu in the grub menu, then I end up in busybox/initramfs. here is my error message http://i.imgur.com/9BUmShb.jpg04:25
ralph4100not sure what to do / where to go next04:25
ralph4100lenovo y500 laptop04:25
ralph4100dual boot w windows 8.104:25
ralph4100efi04:25
ralph4100can anyone help? thanks!04:25
schultzamajed: what is in your /etc/apt/sources.list ? or anything in the /etc/apt/sources.d/ ?04:26
majedhttp://paste.ubuntu.com/9225934/04:27
schultzamajed: anything in the /etc/apt/sources.d/ ?04:28
majedno04:29
majedschultza:no04:29
schultzamajed: try a "sudo apt-get install --reinstall dpkg apt update-manager"04:30
solsTiCeralph4100: it seems the partition 4db9f458-5d53-4223-B4f3-ade4aa2dc715 has disappeared ?04:30
Ranieri_!Git | Ranieri_04:31
ubottuRanieri_, please see my private message04:31
ralph4100solsTiCe: ok ... I am now in live cd mode and just mounted it04:31
ralph4100so - it's there04:31
majedschultza:http://paste.ubuntu.com/9225999/04:32
solsTiCechroot into it and run update-initramfs -u as root04:32
solsTiCeralph4100: ^04:32
schultzamajed: try a "sudo apt-get install --reinstall dpkg apt update-manager python"04:32
ralph4100solsTiCe: I actually did try that already ... and also update-grub ... what happened was, now grub doesn't recognize my windows boot option04:32
ralph4100but it still didn't boot ubuntu04:32
ralph4100solsTiCe: question - can I install new nvidia drivers in the real install by chrooting into it?04:33
ralph4100I read in some forum answers that other people had problem on that front04:33
solsTiCeyes but that's not the problem right now04:33
ralph4100ok04:33
ralph4100solsTiCe: should I try manually setting my partition in the grub console before loading?04:34
majedschultza:I get "E: Internal Error, No file name for dpkg:amd64"04:34
ralph4100I forget what the command is but04:34
ralph4100I know my partition is /dev/sdb1004:34
solsTiCeyou can try04:35
ralph4100ok ... what are some of the causes for this kind of thing?04:35
schultzamajed: "sudo dpkg --configure -a"04:36
priyam_jkl04:36
solsTiCeralph4100: no idea. I just found http://ubuntuforums.org/showthread.php?t=222930704:36
majedschultza:http://paste.ubuntu.com/9226051/04:36
schultzamajed: "sudo apt-get install --reinstall python"04:37
ralph4100solsTiCe: now that my grub is not getting my windows boot ... how would I - if I wanted to - remove grub?04:38
ralph4100to start over?04:38
ralph4100I'm thinking that perhaps in one of my many hard restarts things have gotten corrupted or something04:38
majedschultza:http://paste.ubuntu.com/9226085/04:38
solsTiCeyour uefi has a key F10 ? F12 to display the uefi boot manager option and there you can choose to boot windows04:38
solsTiCeralph4100: ^04:39
ralph4100right - I know I can always boot windows that way, although I would prefer that I be able to do it04:39
ralph4100without that04:39
schultzamajed: sudo apt-get update04:39
priyam_hi avnish04:40
solsTiCeralph4100: why remove grub ?04:40
ralph4100to try again w/ clean install04:40
ralph4100or - maybe I can get grub back to where it was?04:40
solsTiCeclean install of ubuntu ? it will overwrite grub04:41
ralph4100ah - ok04:41
ralph4100then I might try that04:41
solsTiCeralph4100: better try to fix it first04:41
avnish63hello priyam_04:41
ralph4100solsTiCe: ok ... what are my options for fixing it though?04:41
ralph4100haha04:41
solsTiCeralph4100: could pastebin the output of blkid04:42
ralph4100http://paste.ubuntu.com/9226141/04:43
Skipper17when did ubuntu become so bloated?? in 12.04 it was less than 700 MB, 14.10 is twice that, and installed it takes almost 6 GB04:43
zykotick9Skipper17: if you have the knowledge, using the mini (aka netinst) install you can manually de-bloat it...04:44
solsTiCeralph4100: did you try to run a fsck on sda10 ?04:47
ralph4100solsTiCe: no - what is that04:47
solsTiCefilesystem check.04:47
Skipper17zykotick9 i am sure, like back in the days with suse and yast lol04:47
ralph4100ok - reading a page about it now ... looks like I should unmount it first04:47
* zykotick9 never used suse or yast, so would know ;)04:48
zykotick9s/would/wouldn't/04:48
Skipper17but going all default it's like ubuntu exploded in size04:48
zykotick9Skipper17: some, would consider it progress ;)04:49
Skipper17that's kind of what amazed me about ubuntu, that it was sort of fully fletched but fit on a cd rom04:49
ralph4100solsTiCe: http://paste.ubuntu.com/9226141/04:50
ralph4100sorry, /dev/sdb10: clean, 213967/8560640 files, 1694614/34219008 blocks04:50
orlockI used to run X11 from a 100MB Iomega ZIP disk. the parallel port model!04:50
orlocknow get off my lawn!04:50
Skipper17zykotick9 hehe yes04:51
solsTiCeralph4100: well id on't know why it don't find your partition. did you change anything in the uefi/bios config ?04:52
ralph4100solsTiCe: I think after it initially didn't work, I changed from efi-first to legacy-first temporarily to see if that would help04:53
solsTiCeah change it back to efi-first. if it is installed for efi it won't in legacy mode i guess04:54
ralph4100ok ... I'm pretty sure I did change it back but I will double check04:55
ralph4100thanks for all your help04:55
ralph4100I actually can't remember for sure what it's set on right now04:55
ralph4100so I'll try that04:55
Skipper17orlock 100 mb pfffft, i used to run win 3.11 from my 20 mb hdd comodore laptop, i know bloatware when i see it04:57
orlockyeah, but thats win3.1104:57
=== XeBlackWater is now known as zz_XeBlackWater
=== zz_XeBlackWater is now known as XeBlackWater
=== Anoniem4l is now known as Anoniem4l`afk
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
lickalottgents, just ssh'd into my ubuntu rig and it's not letting me do ANYTHING mostly due to "read-only" file system.05:15
lickalottI've also gotten a bus error on "su -"05:16
zerolegend_what error?05:16
zerolegend_and your fs should be mounted read/write to make any changes to anything05:16
lickalottthats all it says.  "bus error"05:16
EriC^^lickalott: mount05:16
lickalottit's been fine. this just happened today05:16
EriC^^what does it say about the mounted filesystems05:16
lickalottEriC^^, mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).05:17
lickalott       It's possible that information reported by mount(8) is not05:17
lickalott       up to date. For actual information about system mount points05:17
lickalott       check the /proc/mounts file.05:17
lickalotti was just about to go connect a monitor to it and force a reboot, but wanted to see if you guys had anything first.05:17
EriC^^lickalott: check /proc/mounts , paste in paste.ubuntu.com05:18
Ranieri_is k1l here?05:18
EriC^^lickalott: maybe it booted into recovery mode or something? or the hdd remained in read only after fsck found something?05:18
lickalottEriC^^, /bin/more: Input/output error.05:19
lickalottI did a more /proc/mounts05:19
lickalottyou think I should just go and be face to face with it?05:19
lickalotti can't sudo or su05:19
EriC^^yeah i guess so05:20
bonobomapper1Sorry for asking this here…05:20
bonobomapper1I'm packaging an icon pack for Ubuntu (and derivatives), Mac OS X (iContainer) and Windows (IconPackager) ... and would like to have opinions regarding WHERE should I publish it, Github, Deviantart, behance ... The goal is to have greater coverage, and accept requests for new icons ... so far the package contain 300 icons. All in a style mix between Pacifica, Numix and iPhonica.05:20
lickalotthere's the odd thing.... all my bots and my znc is running on this server.  I'm on the znc right now with no issues but the bots are chirping like crazy.05:20
zerolegend_i would use deviantart bonobomapper105:20
bonobomapper1thanks! ^^05:21
lickalottalright.  if i part you'll know I hard booted it....lol  if i don't return, well....I'm probably on my way to get my hammer.05:21
zerolegend_or maybe gnome-look bonobomapper105:21
bonobomapper1also, there is a easy to use tool for packaging icon themes for ubuntu/elementary and alike?05:21
EriC^^lickalott: hehe :)05:22
ralph4100hey - is solaris or whatever still here?05:22
ralph4100sorry - can't remember exact username05:23
EriC^^solsTiCe: ?05:23
ralph4100was able to boot for first time by using grub console to manually set partition/vmlinuz/initrd05:23
EriC^^ralph4100: you can type the first few letters then press <tab> to get a completion05:23
ralph4100yes solsTiCe05:23
ralph4100ah, good to know05:23
edwinhola ke tal05:23
=== edwin is now known as Guest73928
Guest73928Oo05:24
ralph4100well - anyway I'm guessing I should run the thing to fix boot problems now?05:24
=== zerolegend_ is now known as phirez
=== seme is now known as Guest99206
avnish63hello05:28
phirezhi05:28
lickalottEriC^^, good to go.  must've got into some odd state.05:31
lickalottthanks man!05:31
liuosexit05:31
avnish63hhhhkjhk05:32
EriC^^lickalott: great! np05:32
=== Guest-9778 is now known as fraytormenta
avnish63wdhxwiqdh21pqoshp21q05:34
avnish63hi05:35
avnish63Hi05:37
avnish63jo05:41
schultzaAloha.05:41
jmaderoif I want to rsync but don't care at all about permissions - options -rvz are correct?05:43
schultzaI don't know rsync that well, so I don't know.05:44
schultza-a, --archive               archive mode; equals -rlptgoD (no -H,-A,-X)05:45
jmadero-a includes permissions which I don't want to do05:45
jmaderothe files don't (and I don't want them to) have the same permissions05:45
jmaderoI'm syncing music over multiple systems05:45
somsipjmadero: fwiw, sync torrent or syncthing may be of interest to you (a bit off topic, I know)05:48
k0nichiwawhat does a proxy server like tinyproxy do ?05:48
k0nichiwasay it runs on port 888805:48
schultzajmadero: do you care about owner/group ownerships?05:48
jmaderoschultza: I don't want to preserve ownership - on my wife's computer she is owner of the files, on my computer, I am05:48
jmaderothat's why I think rvz is right, but I'm getting strange results05:49
k0nichiwathe client wants to http google.com, say, so how does that request get sent to the proxy server ?05:49
k0nichiwahow does the proxy server know you are trying to http get from google.com ?05:49
schultzawhat results?05:49
jmaderoschultza: so I did a small test 3 times - every time I see >f..T......05:50
jmaderowhich implies it's sending the file over and over again05:50
jmaderoafter the first time it shouldn't say >f . . . . . .05:50
jmaderoas the file already exists in the target05:50
schultza-p is progress05:51
jmaderoschultza: yes I know05:51
jmaderothat is completely irrelevant lol05:51
schultzaoh. no.. thats ... --progress05:51
jmaderoboth are the same05:51
jmaderorsync has short and long form options05:51
Skipper17k0nichiwa the browser sends the request to the proxy instead to the actual website, the the proxy retrieves the website and sends it back to the browser05:51
k0nichiwaSkipper17, but how does the proxy know you wanted to get from google.com ?05:52
schultzajmadero: use --delete ?05:52
jmadero...no05:52
jmaderothat's dangerous05:52
jmaderoI don't want to delete anything05:52
k0nichiwasy i http://mysever.com:8888/google.com ?05:52
Skipper17the proxy know because the browser sends it to the proxy05:52
k2gremlin_Damn.. Spent last 2 days getting my ubuntu plex server setup perfectly... And bam new version drops lmfao05:52
Skipper17no05:53
orlockk0nichiwa: the browser behaves slightly differently when it knows it is using a proxy05:53
k0nichiwathe proxy server should just recieve the GET  which doesnt say what the target ip is05:53
schultzait's worked before for me, i dont know what it's doing now05:53
orlockk0nichiwa: or you can have transparent proxies the browser doesnt know about05:53
k0nichiwaorlock is there  a way i can just change what i type in my address bar to use the proxy ?05:53
Kotoro[LAB]what might cause pulse to not see system sound device or USB headset?05:53
Skipper17http://mysever.com:8888/google.com ? no, it's be more like browser options > network > proxy > IP:Port05:54
orlockk0nichiwa: Depends on the proxy server, but if you are trying to bypass some sort of filter, google translate can be used as a quick and nasty method05:54
orlockk0nichiwa: but what skipper said really05:54
Kotoro[LAB]its listing an HDMI output and digital output, but it doesn't see the normal audio out or the usb headset?05:54
k0nichiwaorlock, ive used google translator in that way05:55
k0nichiwaand bing and  yandex and maybe baidu05:55
_Druid_Hello, is possible to disable verbose mode (-v) if session is already started with ssh -v ?05:56
k0nichiwaim just trying to understand how ti works, say in case of transparent proxy05:56
k0nichiwacan you combine ssh tunneling with a a proxy like tinyproxy so that its transparent to the browser ?05:57
Skipper17transparent proxy > browser thinks it's talking to google ( for instance https://www.google.com/search?q=how+does+a+proxy+work ) but is actually talking to proxy ...05:58
k0nichiwayes i was wondering if ssh tunneling could be set up along w/tinyproxy to accomplish that06:01
k0nichiwaoh well most browsers upport using a proxy so no matter i guess06:02
k0nichiwaby default does tinyproxy only accept connections from localhost ?06:03
Skipper17k0nichiwa can't say for sure, ssh tunneling can be used for lots of things but i'd put it more in the category of circumventing transparent proxy's06:04
k0nichiwajus tlooke at the config, the default config fiel only allows localhost06:05
=== Guest-3769 is now known as frayhehee
Skipper17k0nichiwa never seen that conf but it is supposed to be not local only06:09
Skipper17Listen By default, Tinyproxy listens for connections on all available interfaces (i.e. it listens on the wildcard address 0.0.0.0). With this configuration parameter, Tinyproxy can be told to listen only on one specific address06:09
Skipper17change Listen 127.0.0.1 to Listen 0.0.0.006:11
=== Guest-3924 is now known as fraytormenta
sgen_Can anyone recommend any applications for capturing http request contents from chrome?06:27
somsipsgen_: chrome developer tab any good for you?06:27
sgen_somsip: It doesnt seem to save subsequent request traffic, I need to log headers and form data over a series of requests06:28
somsipsgen_: maybe a http proxy with full logging, if there is such a thing06:28
k0nichiwaon my server i can do for tinyproxy curl -proxy1.0 127.0.0.1:8888 google.com and it works06:29
somsipsgen_: but are you trying to listen in to an existing chrome session, or just make requests to a website and log them?06:29
k0nichiwai did ssh -f me@server.com -L 2001:server.com:8888 -N06:29
sgen_somsip: make requests to a website and log them06:29
k0nichiwabut curl -proxy1.0 127.0.0.1:2001 google.com isnt working on the client06:30
k0nichiwahowever ive used ssh tunneling to connect to the wev server on the serer as if i were local and that did work so ssh tunneling does work06:30
somsipsgen_: something like curl then. Unless you're prepared to whip up a bit of code, then there are lots of libraries to do that sort of thing in, say, Python and PHP06:32
The_DarkKnightIs it possible to use Ubuntu on my Mac?06:32
somsip!mac | The_DarkKnight06:32
ubottuThe_DarkKnight: For help on installing and using Ubuntu on a Mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages06:32
sgen_Ill try and whip one up in go06:32
sgen_thanks for hte help06:33
somsipsgen_: probably give you more control than just a load of curl statements in a bach script. Must be a go http request lib out there I'd imagine06:33
The_DarkKnight\o/06:33
alexis_Hola:D06:33
alexis_alguien?06:34
somsip!br | alexis_06:34
ubottualexis_: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br " sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigada.06:34
electricprismWhy are the Gnome packages in Ubuntu Repositories so inconsistent? Nautilus is 3.10, Gnome Shell 3.12 and Empathy 3.806:35
alexis_alguien habla español?06:35
somsip!es | alexis_06:36
ubottualexis_: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro.06:36
electricprismi guess ubuntu has Gnome 3.8 - 3.12 apps in their repos because they suck06:38
xanguaelectricprism: ubuntu has to apply their own patches over gnome apps and sometimes ,or more if you ask me, don't make it in time06:39
xanguaOr fork them like gnome settings06:39
dannasDoes 14.10 support qt5.3.1? http://askubuntu.com/questions/553467/how-build-against-qt-5-3-106:47
somsip!info qt06:47
ubottuPackage qt does not exist in utopic06:47
somsip!info qttools5-dev06:49
ubottuqttools5-dev (source: qttools-opensource-src): Qt 5 tools development files. In component main, is optional. Version 5.3.0-5 (utopic), package size 184 kB, installed size 1343 kB06:49
somsipdannas: so, if that's a representative package, official packages are at 5.3.0. So you may need to look for a PPA06:49
=== b4rbz is now known as Dopagod
dannassomsip: ok. Yes it looks like most of the qt5 components are using qt5.3.0. Do you happen to have any ideas why some packages has version 5.3.1? (see link to askubuntu.com question above)06:51
=== fraytormenta is now known as Guest-3456
somsipdannas: no idea at all06:52
=== Guest-3456 is now known as fraytormenta
dannassomsip: ok. Thanks for your help. Looks like, as you say, that building from source or using a ppa is my options.06:52
waressearcher2I want to compile kernel, I unpacked linux source, now first step I should copy /boot/config to .config ? and then do "make mrproper" ? I mean those are two steps I should do before configuring it with "make menuconfig" ?06:55
somsipwaressearcher2: if you can't figure those steps out, you may struggle with every other step of compiling your own kernel...06:56
waressearcher2somsip: do not demotivate me06:56
somsipwaressearcher2: okaaaay. Give it a whirl. Have fun: https://help.ubuntu.com/community/Kernel/Compile06:57
waressearcher2somsip: are you from Thailand ?06:57
somsipwaressearcher2: off topic. I don't respond to questions like that. EOT for me06:57
waressearcher2somsip: are you getting paid to help people in that channel ?07:00
Seveasg'morning Flannel :)07:02
Seveasno love fore facebook hackers today?07:02
Flannelsince when is that channel not +f :(07:02
Flannelor is it +F, whatever.07:02
FlannelI guess the remove had the desired effect, regardless.07:04
SeveasFlannel: it also stopped him from flooding, so I guess he was doing silly on-join things which are really silly in megachannels like #ubuntu07:07
waressearcher2hanthana: are you from Singapore ?07:08
FlannelSeveas: Hopefully now he's all sunshine and rainbows.07:08
Seveasand unicorns!07:08
waressearcher2and rarity07:09
=== CyberJacob|Away is now known as CyberJacob
waressearcher2somsip: you gave me wrong link, that one is right: https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel07:10
swift110-phoneHey07:14
k0nichiwacant get tinyproxy to work in combination with ssh tunnel07:15
waressearcher2swift110-phone: are all swift109 and down were taken ?07:15
k0nichiwasince ssh  tunnel is supposed to make tcp to local port magically same as tcp to the target port origintaing on the target machien07:15
k0nichiwaand given ive tested it is working on the target machine by doig a curl --proxy localhost:8888 google.com o the remote machine07:15
k0nichiwai cant figure it out07:15
k0nichiwathe number of tiny proxy proceses grows and grows it seems to start another oevery 5 seonds or something07:18
k0nichiwabut i dont see a problem w/the config file07:18
bhahnHey guys, my server closes the socket to a client. if the client sends a message on the socket within 60 seconds after going into close wait, my server will reply with a reset packet, but if the client sends message on the socket after 60 seconds of going into close wait, then my server won’t send any packet responses at all.  Can someone help me explain this behavior? I thought it was related to the fin_timeout, but it doesn’t seem to be related07:26
Seveasbhahn: fin_timeout only applies after closing a connection, you're running into the normal tcp timeout07:29
bhahnso my server’s tcp stack has a timeout (60 seconds) during which it will reply to messages on that socket with a reset, but after the timeout, it well reply with nothing?07:30
bhahn*it won’t reply at all?07:31
gokrThis morning my trusty tahr rebooted itself on its own (I wasn't looking). Highly annoying. I thought it was only Windows doing crap like that.07:41
mjaykgokr: generally it is have a look at your logs07:43
Seveasgokr: I'm not aware of anything causing reboots to happen automatically. Can you dig up syslog entries from around the reboot?07:46
gokrI just looked in syslog, nothing logged - it just abruptly has the boot sequence.07:46
Seveasvroomfondel: Forty-Two!07:46
Seveasgokr: could there have been a power outage?07:47
gokrMaching is a laptop, but it was plugged in as always and has never done anything like this before. Its almost always on. And no, no power outage.07:47
gokrThen our clocks would have been reset.07:47
gokrMachine.07:47
Seveasanything in /var/log/dpkg?07:47
* gokr checking07:47
trickyjHi is it possible to download a Ubuntu Server with specific kernel version ?07:48
gokrno, nothing there.07:48
Seveastrickyj: only if that specific kernel happens to be the one shipped with Ubuntu server :)07:48
trickyjSeveas: Thank you.07:49
trickyjCan we downgrade from new kernel version to specific kernel version ?07:49
Seveasnot easily07:49
Seveaswhy do you want that?07:49
Ben64trickyj: why would you want to07:49
trickyjSeveas: My antivirus software supports only specific system requirement.07:50
Seveastime to choose a better antivirus :)07:51
Ben64indeed. if your antivirus requires you to use an older, buggier kernel, that is a bad sign for sure07:51
Rand0m`antivirus on #ubuntu  ?07:51
Ben64yeah, not very necessary07:52
trickyjtarun: Hi07:52
Rand0m`dont do thta lol07:52
Rand0m`s/thta/that07:52
SnuskGubbenwhat about anti malware for ubuntu?07:52
Rand0m`you are safe enough using ubuntu07:52
Ben64basically, don't run unknown scripts/commands and don't install random debs/PPAs and  you should be fine07:53
taruntrickyj: can u please send me the link to download specified kernal version07:53
trickyjBen64: Seveas Please help tarun to install a specific kernel version on hi ubuntu.07:54
gokrSeveas: I actually have a theory, the machine was on the floor, not in its regular place, and ... the cat might have slept on it. She does that sometimes.07:55
Ben64trickyj: we're telling you its a bad idea07:55
trickyjok Ben6407:55
gokrSeveas: But... wouldn't that be logged somewhere, though? That the machine shuts down.07:55
gokrtrickyj: What antivirus?07:56
=== damian- is now known as damian
SilencedHow to add environment variables in ubuntu07:58
Silenced?07:58
trickyjgokr: Installing Symantec Endpoint Protection 12.1Ru5 On Ubuntu Server. Here is the list of supported kernel http://www.symantec.com/docs/TECH22324007:58
gokrSilenced: For everyone, /etc/profile07:58
gokrSilenced: Otherwise .bashrc or perhaps .profile07:59
gokrSilenced: Ehm, in your home dir I mean.07:59
Silencedgokr : detailed explanation please... New to linux and ubuntu07:59
Seveas!info linux-generic trusty08:00
gokrSilenced: In your home directory (often referred to as "~") you have "dot files" (hidden files) and two control your shell. ".profile" and ".bashrc"08:00
ubottulinux-generic (source: linux-meta): Complete Generic Linux kernel and headers. In component main, is optional. Version 3.13.0.40.47 (trusty), package size 1 kB, installed size 28 kB08:00
gokrYou can edit those with say "nano .bashrc"08:00
Seveas!info linux-generic saucy08:00
ubottu'saucy' is not a valid distribution: extras, kubuntu-backports, kubuntu-experimental, kubuntu-updates, lucid, lucid-backports, lucid-proposed, partner, precise, precise-backports, precise-proposed, stable, testing, trusty, trusty-backports, trusty-proposed, unstable, utopic, utopic-backports, utopic-proposed, vivid, vivid-backports, vivid-proposed08:00
Ben64trickyj: according to that page you can use ubuntu 12.04 with kernel 3.208:01
Seveas!info linux-generic precise08:01
ubottulinux-generic (source: linux-meta): Complete Generic Linux kernel. In component main, is optional. Version 3.2.0.72.86 (precise), package size 1 kB, installed size 32 kB08:01
Seveasyup, you'll be stuck with oldbuntu :)08:01
gokrSilenced: And add a line there like "export MYVAR=blabla"08:01
Seveasas 13:04 isn't supported08:01
Silencedgokr: Thanks dude. I get that now08:02
gokrSilenced: Then you need to reopen a terminal for it to take effect.08:02
trickyjBen64: that's right but when i download the Ubuntu ISO from website it dosen't give me the 3.2 kernel version08:03
Silencedgokr: and what is the shortcut key to shutdown in ubuntu ?08:03
trickyjgokr: I will try it once again, let me check what are the results. I will update you guys if done. Thank you :)08:03
gokrSilenced: And you can check a var with say "echo $MYVAR". Shortcut... dunno. I usually just do "reboot" or "shutdown -r now"08:04
gokrSilenced: But you don't need to shutdown to get a new terminal.08:04
Silencedgokr: i am just asking to ahutdown my laptop08:05
BakerbartDoes CTRL ALT DEL work?08:05
Silencedgokr: i too use 'shutdown -r now'08:05
gokrSilenced: I very seldom reboot my laptop :)08:06
gokrSo a shortcut seems... very unnecessary.08:06
SilencedBakerbart: thats just to log off ... That wont turn off your device08:06
gokrClick on top right icon, select shutdown ? :)08:06
gokrIts not like you are going to do it every minute or?08:06
Silencedgokr: lol 😁08:07
gokrI have closing lid set to ... suspend.08:07
mjaykgokr: me too08:07
mjaykwhen its off battry anyway08:07
gokrThat works fine for me, although I know ACPI generally sucks.08:07
Silencedgokr: me too08:07
gokrMy Lenovo X220 is by far the best Linux laptop I have ever had, bar none.08:08
BakerbartI always press the power button, that brings me a shutdown dialog box08:08
Silencedgokr: whats acpi ?08:08
BakerbartMaybe that works for you08:08
gokrThe power API stuff.08:08
gokrIIRC Linus said he wanted to castrate the people who invented it.08:08
gokrSo it took many years before it started to actually work properly in Linux, at least that's my experience.08:09
sctsHi, on ubuntu 14.04 with a second monitor the windows on the second monitor disappears from view after a sleep cycle. Is there a "Gather Windows" feature?08:09
gokr(suspend, hibernate etc etc)08:09
trickyjtarun: I will try it at my end I will check if I can get you the right version of Ubuntu.08:10
Silencedgokr: using ubuntu for how many years ?08:10
sricharanizedI have a problem with my ubuntu 14.04. I dual booted it with windows 8.1 on a lenovo laptop. The brightness autoamtically increases to maximum at every startup.08:11
sricharanizedWhat to do08:11
gokrSilenced: ehm... dunno... quite a few :)08:11
Bakerbartwell, acpi doesnt really work on my laptop when running linux. Sometimes it jumps from 55 degrees celsius to 75, really odd08:11
gokrSilenced: I am a developer and have been running Linux on desktop since 2002 or something.08:11
Silencedsricharanized : samr problem here08:11
mjayksricharanized: you can do that with xbacklight08:12
SilencedSame**08:12
sricharanizedmjayk: xbacklight??08:12
Silencedmjayk: what is xbacklight ?08:12
gokrSilenced: At the moment I prefer Ubuntu on both my development machines and our cloud servers.08:13
mjaykits a program you can use to configure your backlight settings like bind keys etc it /sys/class/backlight08:13
Silencedgokr: how about archlinux ? Is it good ?08:13
mjayksricharanized: check here http://askubuntu.com/questions/66751/how-do-i-set-default-display-brightness08:13
sricharanizedmjayk: OK08:13
mjayksricharanized: check the 2nd answer08:14
gokrSilenced: I think so, haven't used it and... I don't have time to mess with multiple distros at the moment. Since I actually work on this platform.08:14
Silencedgokr: okay :)08:15
gokrSilenced: There are lots of "good" distros. I played "distro hopping" for a few years, it was fun, but its a time sink.08:15
mjaykgokr: time sink its putting it lightly xD08:15
karab44hello!08:15
mjaykhello karab4408:15
karab44guys I am struggling a problem08:15
gokrmjayk: Indeed. Especially if you to the deep end with source distros :)08:15
mjaykwhats the problem karab4408:15
karab44with 14.04 from time to time ubuntu doesn't detect my secondary ssd08:16
mjaykgokr: i cant get over how stable fast and compatable this ubuntu 14.04 is im itching to break it08:16
=== Silenced is now known as Silenced|afk
karab44it isn't visible in df -h and sudo fdisk -l08:16
sricharanizedmjayk: Done. Thanks. I just had to change "echo 5 > /sys/class/backlight/acpi_video0/brightness"08:16
mjaykkarab44: how is your ssd configured is it just plugged into a sata port ?08:16
gokrmjayk: You feel its much better than 12.04?08:16
karab44mjayk: yes it is just plugged into it.08:17
karab44I have it encrypted08:17
gokrmjayk: Cause I can't say I feel much difference, although I am not pushing it perhaps.08:17
mjaykgokr: personally yes although that just might be me enjoying the stability and the ability to get actual work done when 12.04 was out i didnt have much else to do but mess08:17
mjaykkarab44: does it show under lsblk ?08:18
gokrmjayk: But I agree, ever since I "got over" Unity and just accepted it - its been smooth sailing generally.08:18
karab44mjayk: actually it doesn't show there08:18
=== CyberJacob is now known as CyberJacob|Away
=== CyberJacob|Away is now known as CyberJacob
gokrmjayk: Did play with ideas of other UIs but then... ah, what the heck, this is what is going to be standard so just biting the bullet.08:18
mjaykgokr: im on gnome atm08:19
owen1when should i ask a question on ubuntuforums vs askubuntu08:19
gokrmjayk: I generally don't use the "UI" much, just tons of terminal windows :)08:19
RedPenguinhey all, I'm having a strange issue, twice now on a brand new Ubuntu install, the hard drive light is solid, no remote access, no keyboard response, yet it pings, anything to check?08:19
mjaykkarab44: does it show in the bios at all ?08:19
mjaykgokr: i found that when i use two monitors for presentations etc i prefer the way gnome works, purley personal preference08:20
karab44mjayk: I don't know. I can't define it. I can't be in bios and in the system at the same time.08:20
karab44just like I said. Once it works once it doesn't08:21
mjaykkarab44: thats correct however its something you need to check as to determine if its a configuration problem or a dead drive08:21
karab44Probably when I reboot my PC it will start work08:21
karab44mjayk: dead drive? It's brand new ssd08:21
gokrmjayk: Presentations... yeah... well, I am not sure, what's the difference? The last year I haven't done much presentations.08:21
gokrmjayk: Did a lot earlier, but right now I am busy coding :)08:21
karab44mjayk: so what should I check?08:22
mjaykkarab44: if it displays in bios i would08:22
mjaykgokr: the second display doesnt change when you change virtual desktops by default in gnome its just a few little things that i like. Do enjoy unity aswell though08:22
gokrmjayk: A developer too?08:23
karab44mjayk: but does it have any sense when I restart my PC and it will appear in BIOS? Like I just said it works in most of the time. I've booted it today and I don't see it, For 99 percent after simply restarting my PC disk will appear.08:23
mjaykgokr: I do some maily for my own use in scientific programs08:24
mjaykkarab44: sounds like a hardware problem if its intermitent (?) checked the connection is tight ?08:24
gokrkarab44: Nothing to be seen in dmesg?08:25
karab44mjayk: Nobody is moving 20kg PC around the room08:25
karab44gokr: what info should I look for?08:26
karab44errors?08:26
mjaykkarab44: you dont have to be moving it around a room for a wobbly connection to come loose08:27
owen1how can i detect that the 'Home' key was released?08:27
gokrWell, stuff it says about it. I see stuff about my Samsung SSD in dmesg.08:27
somsipowen1: what was the outcome of looking into xev?08:27
gokrkarab44: dmesg | grep SSD08:28
=== CyberJacob is now known as CyberJacob|Away
gokrkarab44: Is it an intel? I hate Intel SSDs.08:28
karab44gokr dmesg | grep ata  shows no secondary drive08:28
karab44gokr: it's sandisk ultra II 960GB08:29
owen1somsip: http://paste.ubuntu.com/9222819/08:29
gokrkarab44: Good :)08:29
owen1somsip: not sure what to do with that info (;08:29
gokrkarab44: So its not even mentioned in dmesg?08:29
karab44it's not there08:29
karab44but let me reboot and it will be there I believe08:30
karab44I think it can be BIOS issue08:30
somsipowen1: it tells you the keycode. That's what you said you wanted yesterday. What environment are you needing to detect this in?08:30
gokrkarab44: You might want to save dmesg somewhere and compare them08:30
karab44But I have other issues as well. In example when I don't use PC for a day or two, after that break my PC boots to video-fail-safe mode.08:31
karab44after restarting it - it goes back to normal08:31
somsipkarab44: so you have two hardware issues - one for SSD and one for video card? Could it be a dying mobo?08:32
owen1somsip: in a bash script08:32
owen1somsip: i think i can use xinput but not sure how08:32
karab44and I can restart or turn it off and on whole day long and it's not reproducing more again untill the another two day break.08:32
karab44somsip: I don;t think so...08:32
owen1somsip: i saw someone that doing this: while xinput query-state <device name> | grep -Flq 'key[9]=up'   but not sure what should i put instead of key 908:33
karab44it's more driver's or kernel issue08:33
somsipowen1: and that's why I told you to use xev yesterday - it tells you the keycode for home08:33
owen1somsip: right, but i don't see a keycode here: http://paste.ubuntu.com/9222819/08:34
somsipkarab44: I think that's a bad assumption to make, but it's your call08:34
mjaykif the problem is not consistnet its unlikley to be a kernel problem karab44 more likley hardware08:34
karab44you suggest me X99 on old 3.13 kernel works flawlessy perfect?08:35
somsipowen1: that output doesn't seem to show you pressing a key. The code is 110 when I use xev FWIW08:35
karab44I have no similiar issues on windows 8, explain that.08:35
mjaykkarab44: not sure; might be useful next time to include all the info at the start08:36
somsipkarab44: ah - adding information that relates to the problem. Always helpful.08:36
owen1somsip: so let's assume for a minute that 110 is the keycode for home. how do i detect release of that key within bash?08:36
karab44just ask, because I don't have much experience in similiar investigations.08:37
owen1somsip: i assume it's a while loop with grep. but not sure about the exact syntax08:37
karab44let me reboot the os08:38
mjaykkarab44: generally for future reference include all info regarding the problem at the start then we dont waste time. So it works in windows all the time08:38
somsipowen1: if you do not get a 'key not being pressed' event, you probably need to set a flag when it is pressed then poll until that event ends. If you get my drift08:38
RedPenguinwell figured out my issue, for no appearnt reason Firefox & Plugin-Container randomly use up all the memory until the PC decides to freeze08:38
karab44mjayk: so far yes but I spend 99percent of my time on ubuntu.08:38
karab44the second thing is that even on ubuntu it's just 1 on 10 cases that something fails so it's hard to say anything.08:39
mjaykso it could be that because the problem is intermitent you dont notice it not working in windows because you dont use it alot08:39
mjaykcan you pastebin your dmesg08:39
karab44mjayk: yes, so far yes.08:39
mjaykmight be something in there08:40
themusicgod1easy question: what is the "Web Content" process?08:40
owen1somsip: do u know the correct syntax for that loop? while xinput query-state <device name> | grep -Flq 'key[110]=up'   i don't know if key is even the correct name.08:40
karab44mjayk: I haven't find any errors but I can't see the drive as well...08:40
somsipowen1: no I don't08:40
owen1ok. np08:40
owen1thanks108:40
karab44mjayk: http://www.pasteall.org/5534308:41
somsipowen1: looks like xinput list will help you with the device name. Try these: http://manpages.ubuntu.com/manpages/intrepid/man1/xinput.1.html http://unix.stackexchange.com/questions/129159/record-every-keystroke-and-store-in-a-file08:44
mjaykkarab44: and you only have sda and sdb where sdb is the one that doesnt work08:45
karab44mjayk: true is that08:45
owen1somsip: reading. thanks!08:45
mjaykso it sees a removable drive there08:45
karab44if sda didn't work I wouldn't be here ;)08:45
mjaykid hope you could find a way here if it didnt08:46
mjaykand i was making sure sdb wasnt a usb drive you plugged in08:46
karab44yeah, there are other ways to do that08:46
karab44mjayk: sdb is SSD sandisk ultra II 960G08:47
karab44it's sata III 6GBs interface08:47
karab44of course it has hotplug but I don't use it08:47
karab44I Found something     6.037224] lpc_ich: Resource conflict(s) found affecting gpio_ich08:49
=== MeltedDed is now known as MeltedLux
karab44oh it's probably nothing...08:50
karab44[ 7067.973799] pool[15297]: segfault at 10 ip 00007ffac2bd68d0 sp 00007ffa757e6b30 error 6 in libfreetype.so.6.11.1[7ffac2b80000+9d000]08:54
karab44this could be potentially exploited08:54
karab44but still nothing about disks...08:55
ikonia?08:55
ikoniawhat are you talking about08:55
karab44about segfault I found in dmesg08:55
ikonia....and ?08:55
karab44are you a programer ikonia?08:56
ikoniadepends ?08:56
allstarsnorks2Why is Ubuntu Mini 12.04 and 14.04 giving me a bad archive mirror08:56
ikoniawhat's the actual issue ?08:56
karab44ikonia: I can't see my SSD08:56
cfhowlettallstarsnorks2, paste the error08:56
ikoniakarab44: thats totally different to the font library error you just pasted08:57
ikoniaand the random claim of exploit08:57
karab44I know, I told it's not related.08:57
ikoniacan you please summerise what you want/need from this channel08:57
mdogekarab44: if you cant see your SSD maybe its because in your computer case?08:57
ikoniakarab44: then why are you pasting random font libray errors as an exploit when you really want help with your ssd08:57
ikoniamdoge: help - or don't speak08:57
mdogeikonia: aye captain08:58
OerHekskarab44, is it a SSD or hybrid SSD/hdd ?08:58
allstarsnorks2it either gives me an error or just blanks out08:58
karab44it's sandisk Ultra II 960GB I told it 200 times already. It's ssd08:58
OerHekssorry, i rebooted 15 min ago08:59
karab44ikonia and yes libfreetype when it comes to segfault is potentially exploitable - so it's security case but it's just by the way08:59
ikoniakarab44: why is that an exploit ???08:59
ikoniawhat are you talking about08:59
karab44ikonia: it's not an exploit08:59
karab44it's exploitable08:59
ikoniawhy ??08:59
ikoniawhy is it exploitable ?09:00
mdogekarab44: please stfu noob09:00
mdogeyou dont know anything about security09:00
ikoniamdoge: tone down the language09:00
karab44:D09:00
ikoniamdoge: there is no need for it, and it's not welcome09:00
mdogeikonia: aye captain :-)09:00
allstarsnorks2mirror does not support the specified release (trusty)09:00
cfhowlett!behelpful| mdoge,09:00
ubottumdoge,: As our !guidelines say, "When helping, be helpful". If you're not familiar with the issue at hand, let someone else handle it instead of making !offtopic comments or jokes.09:00
allstarsnorks2but it's the 14.04 minimal version...09:00
karab44when it comes to seg fault you can read out of the memory space09:01
ikoniakarab44: not always, and it depends09:01
ikoniakarab44: and that doesn't mean it's a bug - that could be something to do with your specific hardware config09:02
karab44so in general anyone who know hows how to write an exaploit can access secured range of memory/ i'e root shell09:02
ikoniakarab44: I'd advise not logging a bug for something you don't really understand09:02
allstarsnorks2cfhowlett the error reads " mirror does not support the specified release (trusty)" even though I'm using the 14.04 version of Minimal Ubuntu09:02
ikoniakarab44: thats not true,09:02
cfhowlettallstarsnorks2, test by switching to main mirror09:02
karab44ikonia: I won't discuss it here.09:03
allstarsnorks2cfhowlett same thing09:03
ikoniakarab44: good09:03
cfhowlettallstarsnorks2, dang.  I was really hoping it would be simple.09:03
allstarsnorks2it may be my internet brb09:04
kam270!help09:05
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience09:05
karab44I can recommend many books how to write safe code09:06
ilhamihow can I fasten my ubuntu VM?09:06
karab44ok so what about my drive?09:06
ash`karab44: "write safe code" is so ambiguous i really don't think that belongs here - unless you're talking about the kernel level? which i doubt09:07
karab44kernel is interesting case, yes09:07
ilhamidudes09:09
karab44it's really easy to use libfreetype in any app and catch stock pointer and play it around until you break out. It's time consuming but relatively easy.09:09
karab44brb09:09
HappyNewYear13what do firefox users do to get adobe flash to work correctly while using its latest version?09:11
karab44ok I restarted my PC and sandisk is with me now09:12
karab44how to explain that?09:12
somsipkarab44: dodgy hardware. My video card dies about twice a week unless I open the case, wobble it, then reboot. Hence my earlier suggestion.09:13
themusicgod1which channel is best to discuss vivid issues?09:13
OerHeksHappyNewYear13, install flashplugin-installer, it will get you flash 11.2.202.4109:13
DJonesthemusicgod1: #ubuntu+109:13
ikoniakarab44: any part of the desktop / dependencies used to mount failed09:13
cfhowlettthemusicgod1, #ubuntu+109:13
themusicgod1thx09:13
ikoniayou had a segfault on one app, others may have crashed too09:13
ikonia(as a random guess)09:13
owen1somsip: i see 'key release 110' but when i add the xbindkeys to trigger mousedown when home is pressed, i don't get the 'key release 110'09:14
karab44ikonia: may be true but it's not anywhere in dmesg09:14
ikoniakarab44: dmesg doesn't catch everything09:14
ikoniakarab44: it depends on what crashed and why09:14
HappyNewYear13OerHeks, are you happy with having version 11.2 instead of 15? do you use firefox?09:14
=== zz_XeBlackWater is now known as XeBlackWater
karab44ikonia: but should catch SSD drivers, right? Just like it does second time - I mean now.09:14
ikoniakarab44: who said it's ssd drivers ?09:15
ikoniathere are no "drivers" for ssd disks09:15
somsipowen1: with what you describe, you should get key pressed when a key is pressed, not key release. Or maybe key release is not an event and you have to poll for 'key no longer being pressed'09:15
karab44so how it works then? Magic does the job?09:15
ikoniakarab44: no,09:15
=== Schnabel- is now known as Schnabeltierchen
=== root is now known as Guest30947
gr33n7007hHappyNewYear13, 15 wtf that's win/mac osx only, 11.2 latest on linux09:16
owen1somsip: i always see 'key press 110'. the release is the tricky one09:16
karab44I tought all my life that kernel or kernel modules contains some drivers to make hw work but I see I was wrong...09:17
ikoniakarab44: the mounting of the disk (and especially in the desktop) is made up of many components09:17
ikoniaif one of them crashed/hung it can stop the auto mounting of the disk09:17
somsipowen1: enter loop that checks for 'key being pressed' and exit when condition is false09:17
ikonia(just an easy example)09:17
OerHeksHappyNewYear13, adobe dropped support for linux-flash, 11.2 is the latest.09:17
OerHeks* only bugs will be repaired09:18
karab44ikonia: that is right but It's not even detected by the kernel so it can't be mount when it's not even conscious the drive is there09:18
karab44mounted*09:18
ikoniakarab44: again - that could be many things09:18
karab44ikonia: of course I do not exclude bios or disk itself yet09:19
OerHeksHappyNewYear13, pepperflash for chromium/chrome is the newer ppapi version see .https://help.ubuntu.com/community/RestrictedFormats/Flash09:19
karab44I had some similiar problems when I was using my current primary drive - the firmware was an issue that causes BSODS09:19
karab44it was there after many many fw updates09:20
karab44but it's finally stable09:20
HappyNewYear13gr33n7007h, OerHeks there's a "fresh player plugin" to run version 15 on firefox but im having problems, but it should work for most: http://www.webupd8.org/2014/05/install-fresh-player-plugin-in-ubuntu.html09:20
karab44can I set the kernel to some verbose printing?09:20
ikoniakarab44: verbose printing ???09:21
ikoniakarab44: what are you trying to achieve ?09:21
OerHeksHappyNewYear13,  freshplayerplugin is not supported here, seems like a hack09:21
karab44look for some errors related09:22
ikoniakarab44: errors related to what ?09:22
karab44to disappearance of my drive09:22
ikoniathey will have already gone09:22
ikoniaand the kernel is quite verbose anyway09:22
ikoniayou seem to be assuming it's a kernel problem09:22
HappyNewYear13OerHeks, it's really good09:22
karab44no I assume that kernel prints may help09:22
ikoniasorry no09:23
ikoniathis appears to be random approach to a non-existant problem (at this moment in time)09:23
karab44so where should I start then?09:23
OerHeksHappyNewYear13, so you answered your own issue, good.09:23
ikoniakarab44: I would wait for the problem to happen again09:23
ikoniathen evaluate your system at that point in time09:23
karab44probably tomorrow. It happens when PC awakes... really. It lives it's own life09:24
HappyNewYear13OerHeks, i wanted to know if firefox users do something else to get version 15 running09:24
karab44I mean I don't suspend the system, I turn the power off.09:24
OerHeksHappyNewYear13, there is no offical way to get flash15 for linux.09:24
HappyNewYear13OerHeks, some sites dont work correctly with flash 11.2. nd i don't like chromium/chrome09:25
HappyNewYear13why did adobe do that? (stopping support for linux?) i bet they use linux machines to run their servers and develop their shit09:26
cfhowlettHappyNewYear13, ask adobe - their decision, not ubuntu09:27
HappyNewYear13cfhowlett, as if they would reply to me09:27
karab44I am back with some news!09:36
karab44http://pasteall.org/pic/8040109:36
karab44now this09:36
karab44but this is still not related to my secondary SSD09:37
karab44it's related to my primary SSD :)09:37
karab44any helpful hand would be priciated09:37
blasmasya09:47
blasmaswell?09:53
blasmas:-/09:54
cfhowlettblasmas, well what?  no mind readers here = post your ubuntu question09:54
blasmasI09:57
blasmashi09:57
=== cytom2k is now known as cytom3k
=== michael_imac is now known as michael_mbp
lopuch1.10:07
lopuch1.10:08
lopuch1.10:08
Fuchslopuch1: try being somewhat more verbose10:08
Fuchsmost people in here probably don't speak .10:09
SnuskGubbenI speak .10:09
SnuskGubbenlopuch1, . . .. . .    .10:09
akurilinIs it possible to do hd-level encryption with ubuntu on the root drive after the distro has already been installed?10:12
akurilinI guess it doesn't have to be the whole drive, that doesn't make much sense10:13
akurilinno sensitive data there10:13
cfhowlett!info ecryptfs10:13
ubottuPackage ecryptfs does not exist in utopic10:13
OerHeksakurilin, full encryption must be done during install, just encrypting your /home can be done afterwards10:14
OerHeksakurilin, see http://www.howtogeek.com/116032/how-to-encrypt-your-home-folder-after-installing-ubuntu/ it takes a few steps10:15
lopuch1.10:20
SnuskGubben.10:21
martapyhi guys. how do i solve this problem: when trying to boot from flash drive an error comes up saying "initramfs unpacking failed: uncompression error"10:23
Ben64martapy: what flash drive10:24
karab44And now I'm on my android tablet ;)10:24
martapyBen64: a kingston 8GB flashdrive10:26
Ben64martapy: i mean what is on it...10:26
martapyBen64: debian stable10:27
Ben64martapy: well then you should head to #debian and ask them10:27
pringlesmartapy: i have the same problem as you10:28
karab44I had kernel panic10:28
martapyBen64: okay thanks.10:28
OerHekspringles, then you should do the same :-)10:28
SnuskGubbengive the kernal some xanax and it will stop panicing10:31
SnuskGubben#ubuntu-offtopic10:32
BakerbartYou can get the latest flash player for firefox on linux with fresh player plugin10:39
ikoniayou can't10:39
ikoniaflash has stopped developing from linux10:39
ikoniaanything else is not from adobe10:39
lopuch1.10:40
OerHeksBakerbart, if you point to http://www.webupd8.org/2014/05/install-fresh-player-plugin-in-ubuntu.html it is just a hack, with known issues too10:40
BakerbartThat's what I meant10:40
BakerbartI haven't tried it yet but it seems like a good solution10:41
=== JacobM27 is now known as bitstring
=== rigor789|away is now known as rigor789
lopuch1.10:45
SnuskGubben.10:45
karab44How to proceed after kernel panic?10:53
tirengarfioI have just installed ubuntu 14.04 but firefox doesn't start, the icon start to blink but the app doesn't start10:54
ikoniakarab44: reboot10:54
SnuskGubbenkarab44, did you give the kernel some xanax?10:54
karab44It says soft stuck cpu10:55
ikoniaSnuskGubben: please don't make silly comments, if you can't of help - don't10:55
ikoniakarab44: it doesn't say that10:55
ikoniakarab44: it says it can't find your root disk10:55
karab44Ikonia I had another one10:55
ikoniasounds like you have hardware problems then10:56
ikoniasegfaults and kernel panics normally = hardware10:56
ikoniaI'm guessing your looking at a line that says "softlock on cpu"10:56
SnuskGubbenikonia, i'm sorry.10:56
ikoniaSnuskGubben: no problem10:56
karab44Doesn't happen on windows10:56
ikoniakarab44: doesn't mean anything10:56
ikoniakarab44: possible incompatible hardware though10:56
ikoniaif you want to approach it from windows work / linux doesn't point of view10:57
karab44But I moved my ssd from old PC to new one. So it's old system10:57
tirengarfioany help?10:57
ikoniakarab44: that means nothing and has no impact10:57
karab44Old system with new he configuration10:57
ikoniatirengarfio: open a terminal, type "firefox" and see what happens10:57
ikoniakarab44: again means nothing10:57
karab44Well it is hasewell-e on x99 so quite new and very different10:58
ikoniakarab44: again - means nothing10:58
karab44It means a lot10:59
karab44I can't in example install sli10:59
ikoniait doesn't10:59
karab44But on  fresh 14.10 I can10:59
ikoniakarab44: sli has nothign to do with anything you've said10:59
ikoniakarab44: please focus on the real issue rather than random examples to try to score points10:59
karab44I try to use some logic here11:00
ajayaaHi guys. How do I find out amount of data my ubuntu box uses from internet in a time period?11:00
ikoniakarab44: and your logic is failing11:00
ikoniaso focus on the problem11:00
karab44When I don't have enough proves11:00
ikoniakarab44: pardon ?11:00
Ben64ajayaa: you can use bwm-ng to keep a running total11:00
karab44Why failing? You can't prove that11:00
tirengarfioikonia: it says could not create gnome accelerators directory /home/tirengarfio/.gnome2/accels : Permission denied11:00
ikoniakarab44: I've suggested base reasons, you need to investigate and not make assumptions11:01
ikoniatirengarfio: ok,sounds like you've run firefox as root at some point and messed up the permissions11:01
karab44Right but I want to start at some place11:01
ikoniakarab44: what have you done so far ?11:01
ajayaaBen64, Thank you.11:02
karab44I checked the connections and slot matching under the hood11:02
r_a_xsoftware center does not have "install" option it has "use this source" ??11:02
karab44I have bios boot loader. Can I switch it to efi?11:03
karab44I had some time ago hw fails because of fastboot on old hw11:03
ikoniakarab44: what seems unlikely as a problem11:04
ikoniakarab44: if your machine is booting - then efi should not be a problem11:04
karab44It does booting11:04
karab44But without disk from time to time11:05
ikoniaso that suggests hardware11:05
ikonia(from a basic level)11:05
karab44Nice case for long winter evenings11:05
karab44OK I switch to w8 for 2 weeks. If it reproduces than I'll blame the hw11:06
karab44I have no choice11:07
karab44I've tested all known Linux benchmarks and diagtools11:07
karab44So far11:07
ajayaaBen64, It only gives the bandwidth. I need total data transferred through a interface.11:08
Ben64ajayaa: it does that too11:08
OerHekskarab44, some ssd's need new firmware, did you check that?11:08
karab44Yes11:08
ajayaaBen64, I can't seem to find that in --help. I will dig further. :)11:09
Ben64ajayaa: do you see where it says "press 'h' for help"11:09
ajayaayes11:09
ajayaaBen64 ^11:09
Ben64press 'h' for help11:09
calimero_82hi guys11:10
calimero_82every time i boot lubuntu appears: problem detected :/usr/sbin/samba, i've lubu 14.04, what should i do? thanks11:10
ajayaaBen64, It was a bit counter intuitive but I got it finally. 't' does it.11:13
evenflowhi, i am mounting nfs4 export on ubuntu, and noticed that when copying files using cp im losing the nfs4 acls, after some googling i saw that cp -p uses a different system call for getting the acl, is there anyway to make cp aware of nfs4 acls?11:14
r_a_XSoftware center do not have install option instead it shows "use this source"11:15
OpenTokixanyone experienced with maas and openstack?11:15
OpenTokixMy maas cluster master dont see any of its interfaces11:16
r_a_Xafter googling I found that it can be resolved by using this  command "sudo apt-get update " but for every repository it shows failed to fetch ,some index files failed to be download ,old ones used instead11:19
Ben64r_a_X: pastebin the error(s)11:20
=== pvoigt_ is now known as pvoigt
WyZeGuYinstall dnscrypt, yes/no?11:25
karab44Limbo11:25
karab44Abyss11:25
karab44I hate myself and I want to die11:25
cfhowlettkarab44, beyond the scope of this channel I'd say ...11:26
WyZeGuYkarab44 that's a really simple thing to accomplish. but why don't you just try to make the most of life, while you have it?11:26
WyZeGuYkarab44, i'm full of good advice. just listen to me, i'll tell ya11:27
RyviusHelp I am trying to follow this guide, but how do I place the line into the file? http://manpages.ubuntu.com/manpages/utopic/man4/acpi_toshiba.4freebsd.html11:27
karab44Cmon I always have some adventures with computers. Why can't I normally work instead?11:27
karab44I am solving mysteries when I have so much work to do11:27
karab44It's not easy path11:28
=== sjefskoder is now known as Guest93787
WyZeGuYINSTALL dnscrypt, YES or NO?11:30
cfhowlettWyZeGuY, give no details, as you just did, get no meaningful answer, as you just have ...11:31
OerHeksWyZeGuY, that is up to you, some use dnscrypt-proxy others use opendns11:31
Ben64WyZeGuY: its not in the repositories, so figure it out for yourself, its not supported here11:31
nwehello, how can I do so ubunut dont rename my interface from ethX to emX etc?11:33
WyZeGuYhello?11:36
cfhowlettWyZeGuY, your question was asked and answered.  next?11:37
WyZeGuYcfhowlett, nothing came through on my end. could you copy paste the answer?11:37
cfhowlettWyZeGuY, <Ben64> WyZeGuY: its not in the repositories, so figure it out for yourself, its not supported here11:37
WyZeGuYhm ok. thanks for pointing out the logical side to me. i will consider that next time.11:38
DrDroidIf anyone can help I am running UB 14.04, I decided to disable Compiz to do some troubleshooting but I went too far and I disabled the Compiz libraries now I've lost the Unity launcher and top bar. I can't even bring up Terminal by doing a Ctrl+Alt+T How can I restore the Compiz Libraries. I would appreciate any help.11:39
Ben64DrDroid: it would help if you specify how you "disabled the Compiz libraries"11:39
FuchsDrDroid: how exactly did you "disable" them?11:39
FuchsDrDroid: and you can always get a VT with CTRL+ALT+F2   (CTRL+ALT+F7 to get back), just in case of you needing a terminal11:40
DrDroidFuchs: I went into Compiz manager and disabled Compiz from there.11:40
RyviusOh so that's how you get back11:40
FuchsDrDroid: I assume you mean ccsm. You can start that from said VT, just go there (CTRL+ALT+F2), run  DISPLAY=:0 compiz,  CTRL+ALT+F7, enable what you need11:41
DrDroidI've tried the CTRL+ALT+F7 but I need the correct commands to restore it.11:42
FuchsFor that you'd need to tell us how exactly you broke it,11:42
DrDroidI'll try that Fuchs.11:43
Fuchsif really only by deselecting stuff in compiz-manager (ccsm), then I gave you the needed command.11:43
DrDroidFuchs thanks for the help :-)11:47
Fuchsyou're welcome11:47
lopuch1.11:50
AlexPortableHow can I get libreoffice in dutch?11:50
lopuch1.11:51
cfhowlettAlexPortable, set your system to Dutch11:51
lopuch1.11:52
RyviusHelp how do I get acpi_toshiba installed11:53
lopuch1.11:53
AlexPortablei meant spellchecker11:53
lopuch1>11:54
hateballAlexPortable: apt-get install myspell-nl should do it11:54
tirengarfio_I get an error while trying to upgrade ruby () so I google and after running $dmesg I get this output: http://paste.ubuntu.com/9231286/11:57
tirengarfio_please look at the end of the text, there could be something wrong with my hard disk?11:58
tirengarfio_what should I do?11:58
AlexPortablethx11:59
tirengarfio_the error while trying to upgrade ruby is: http://paste.ubuntu.com/9231333/12:00
=== alessandro is now known as Guest70070
Ben64tirengarfio: don't see any error relating to ruby, but your first paste indicates a filesystem error, and the second one is probably related to the first12:01
ubuntuso many bugs with networkmanager12:03
ubuntuew12:03
=== ubuntu is now known as Guest71178
paradox_hello12:07
Guest30947 hi12:10
Guest30947paradox12:10
usr13tirengarfio: sudo dpkg --configure -a  #Did you do that?12:23
lopuch1.12:26
lopuch1.12:26
lopuch1test12:26
Ben64lopuch1: please stop using this channel for full stops and other irrelevant stuff12:27
lopuch1ok, srz12:27
* cfhowlett adds lopuch1 to /ignore12:27
MacroManQuick one. How does one escape a ' character when using echo and surrounding the string in ' ?12:28
MacroManeg echo 'This is a string with a ' character'12:28
usr13tirengarfio: shutdown -ry now  #To do filesystem check / repair if possible12:28
Ben64MacroMan: you don't12:29
UselessWolfhiho12:30
MacroManBen64, That's not really helpful. I kind of need to.12:30
UselessWolfcan someone tell me why apache isnt autostarting?12:30
Ben64MacroMan: then use double quotes12:30
MacroManOK. Same question for double quotes?12:31
Ben64echo "blah ' blah"12:31
Ben64works fine12:32
MacroManBut what if my string contains both single and double quotes?12:32
Ben64echo "blah \"' blah"12:32
MacroManecho "mary said "Here's my sponge""12:32
MacroManBen64, Cheers. I'll give \" a go12:33
Guest71178are launchpad repos safe security wise to use?12:36
BadApei feel the need, the need to share dumbassary, backupscript.sh outputs the tar.bz2 to /tmp/12:37
Ben64Guest71178: they're by 3rd parties, so... it depends how much you trust the people who maintain them12:37
BadApeno one else finds that funny?12:38
Guest71178Ben64, thanks for your answer12:38
k1l_Guest71178: they are not official form ubuntu/canonical. so it depends on how much you trust the one who runs that PPA12:38
Guest71178k1l_, ty12:38
UselessWolfneed help to put apache in autostart T_T12:39
usr13Ben64: I don't think you need to escape the ' just the " Right?12:39
usr13echo "Mary said, \"Here's my sponge\""12:39
Ben64usr13: which is what i did12:39
usr13Oh ok12:39
usr13Oh yea, I see.  Sorry12:40
gansteedwhat is the usage of virtualbox-guest-dkms? should I install it?12:40
Ben64usr13: np, nothing wrong with some peer review :D12:40
Ben64gansteed: if you're running ubuntu as a guest in a virtualbox vm, its probably a good idea12:41
gansteedBen64: so it not support windows, right?12:42
Ben64gansteed: uh... what are you trying to accomplish?12:42
usr13!info virtualbox-guest-dkms | gansteed12:43
ubottugansteed: virtualbox-guest-dkms (source: virtualbox): x86 virtualization solution - guest addition module source for dkms. In component multiverse, is optional. Version 4.3.18-dfsg-1 (utopic), package size 459 kB, installed size 3687 kB12:43
gansteedI mean it not support windows as guestOS?12:43
gansteedI get it ;D12:44
k1l_gansteed: windows doesnt use dkms. so no12:44
gansteedthanks, guys12:44
=== tcpman is now known as Guest66360
k1l_gansteed: but vbox supports windows as guest os.12:45
k1l_just not with the package you mentioned12:45
Ben64gansteed: windows also doesn't support .deb files or apt-get... i'm not sure if you understand the purpose of that package. it is to be installed on an ubuntu guest system, the host can be windows or linux12:45
gansteedyeah, I know this point12:46
gansteedmy host is ubuntu ;-), and my guest is windows xp12:47
Ben64ok, then there is a "guest additions" iso that can be installed in windows, i think vbox will prompt you to download it12:47
gansteedBen64: my host OS is * ubuntu *  :D  just type `sudo apt-get install virtualbox-guest-additions-iso`12:49
=== xubuntu is now known as Guest11845
=== rigor789 is now known as rigor789|away
alessandro_server irc.oltreirc.org12:49
cfhowlettalessandro_, spam is unwelcome.  stop.12:50
Fuchscfhowlett: you know, maybe he just intended /server ...12:51
nwehello how can I tweak glusterfs? I have setup two nodes with replication..  i mounting it with mount -t glusterfs <ip>:/glusterfs /mount/point/ when I testing it with dd I get http://pastebin.com/90iqs6Nw but when I doing on the storage node I git 1.6 GB/s12:53
* skalpelis KEPENINE.////////.12:53
* skalpelis MANAU, KAD TAI SIMBOLIZUOTA, TIKRA VALDZIOS ATEJIMA, IR ZINOMA, KAD KIEKVIENAS KURIS NEPRITEMPS, BUS ISJUNGTAS, O SROVE--------NUTRAUKIAMA;P.12:53
ikoniaskalpelis: stop please12:54
skalpeliskarocia pasol naxuj zair muhmad araisin12:54
ikonia!it | skalpelis12:54
ubottuskalpelis: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)12:54
ikoniaoops, sorry, wrong language12:55
Fuchsthat doesn't look terribly italian to me, yes12:55
Fuchsbut then it doesn't look terribly like any of the languages I know, and google is at a loss, too12:55
k1l_!lt | skalpelis12:55
ubottuskalpelis: Šiame kanale bendraujama anglų kalba. Jei ieškote pagalbos lietuvių kalba, prisijunkite prie #ubuntu-lt kanalo.12:55
HIGHESTIQINGALAXoooooooo mumbod pedereros! sickorinos! kulipanos!12:56
HIGHESTIQINGALAXmumbos!12:56
FuchsLithuanian could be.12:56
medecauHi, I’m on a mac and I am trying to get .iso into a usb drive12:58
Ben64medecau: what iso12:59
medecauI have tried using dd but it wont boot on the macbook12:59
medecau14.0412:59
medecaufor the desktop12:59
OerHeks32 or 64 bit?12:59
Ben64you should be able to dd if you use the mac iso12:59
medecauhttp://mirrors.fe.up.pt/pub/ubuntu-releases/14.04.1/ubuntu-14.04.1-desktop-amd64.iso12:59
medecauthat one12:59
cfhowlettmedecau, don't dd.  make the usb with ubuntu-startup-disk-creator12:59
cfhowlettmedecau, "won't boot" means ???13:00
cfhowlettdetails13:00
medecaucf the comp boots but fails to read the drive, it’s something wrong with the process of putting things on the drive13:00
cfhowlett!md5sum | medecau, verify your .iso        and USB13:01
ubottumedecau, verify your .iso        and USB: To verify your Ubuntu ISO image (or other files for which an MD5 checksum is provided), see http://help.ubuntu.com/community/HowToMD5SUM or http://www.linuxquestions.org/linux/answers/LQ_ISO/Checking_the_md5sum_in_Windows13:01
cfhowlettmedecau, also what year is your MB?13:01
medecauI was able to get debian in the target comp but I feel miserable editing files to get a working computer and am defaulting to ubuntu to get past the nightmare of yak shaving13:01
lanoxxI am trying to setup a network scanner from an HP all in one device but it is not being recognized. Are there any instructions or documentation about hp scanners/all in one devices. I am on 14.04 LTS13:02
medecauMB is 4,1 from early 200813:02
cfhowlett!mac | medecau, might be a different process = read the wiki13:02
ubottumedecau, might be a different process = read the wiki: For help on installing and using Ubuntu on a Mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages13:02
medecauoh md5 is a good idea, didn’t thhink of that13:02
thepheinexgood moring all13:04
OerHeksold wiki https://help.ubuntu.com/community/MacBookPro4-113:04
jaccohi all13:08
jaccoI'm back13:08
jaccowell, I sorted out some of my past issues with Ubuntu 14.04.1 LTS installation over a full encrypted disk in manual style13:08
jacconow I have a new problem13:09
jaccosystem won't boot, cause the installer wasn't smart enough to understand my setup and create a proper grub.cfg file13:09
jaccomy problem now is, how I should fix it in order to make system boot?13:10
jaccowell, passing "cryptdevice=/dev/sdaX:MyLVM" on the kernel command line wasn't enough13:11
jaccomy setup is LVM on top of a LUKS device13:11
medecauOerHeks: mine’s not an MB pro just vanilla MB but thanks13:12
jaccoI tried to chroot via live installer to fix it, but regenerating the config file wasn't sufficient13:12
jaccostill stuck there, system won't boot (after few moment I'm back in an emergency shell13:13
jacco)13:13
tirengarfioI have problems with Ubuntu 5 or 6 months ago, My problem is that the apps get crashed, overall firefox and thunderbird, I get problems also with virtual machines in Virtual Box. Sometimes the Ubuntu get frozen also. I have reinstalled Ubunutu twice and checked the md5sum. I have also change the harddisk and the ram memory. What else can I do? Could be a problem with the motherboard or processor. Im getting crazy..13:13
cfhowletttirengarfio, read your system logs13:14
tirengarfiowhere are they?13:14
jacco@tirengarfio I'm dealing a very similar issue with a friend's computer, looks like you have either a faulty PSU or some bad capacitors on the mobo13:14
jaccoor perhaps something more serious13:14
tirengarfiopsu? what is that?13:15
jaccoPower Supply Unit, your computer power source13:15
cfhowlettmedecau, this is the most recent wiki - should work with 14.04.113:15
tirengarfioyes, that could be!! sometimes the computer shut down by its own, and restart by its own again13:16
tirengarfiojacco:13:16
cfhowlettmedecau, note: rEFIT has been replaced by rEFIND13:16
tirengarfiowhat should I do? what is the relation between the crashing and the power supply??????13:16
medecauso, I was looking at the local mirrors for ubuntu and found a problem, contacted the admins and they pointed out that it is coming from upstream.13:17
jaccoan aging/faulty PSU maybe not able to supply enough current to your system, making it unstable13:17
medecauYou might want to know about this: http://archive.ubuntu.com/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/13:17
cfhowlettmedecau, back down to 12.04 = still supported13:17
medecauit works13:17
jaccosimilar basis applies to bad capacitors on the motherboard13:17
jaccoalso, some cheap PSUs tend to have voltage/current fluctuations very often13:19
tirengarfioBut I didn't have these problems when I bought the computer, what should I do then jacco buty another power supply?13:19
jaccocheck your current PSU warranty state: if it is in warranty, go to the shop where you bought it and ask a replacement13:19
theptrhi, i want to auto add a repo but i do something wrong with my command this is what i do : sudo add-apt-repository : deb http://download.webmin.com/download/repository sarge contrib13:20
jaccootherwise, contact the PSU manufacturer (if it is from a serious manufacturer) and ask it13:20
cfhowlett!webmin | theptr webmin is explicitly advised against and NOT SUPPORTED here.  you're on your own13:20
ubottutheptr webmin is explicitly advised against and NOT SUPPORTED here.  you're on your own: webmin is no longer supported in Debian and Ubuntu. It is not compatible with the way that Ubuntu packages handle configuration files, and is likely to cause unexpected issues with your system.13:20
theptrubottu, i have to use it for school so i have no option13:21
ubottutheptr: I am only a bot, please don't think I'm intelligent :)13:21
=== matheus is now known as Guest96215
=== matheus_ is now known as Guest67340
lesshastewhen I use my cd player to rip a cd it puts linux into an unstable state. I start getting "Bus error" when I do "ls" on the hard drive for example13:21
tirengarfiojacco thank you very much, I will do that13:21
jaccono worries my friend13:22
solsTiCelesshaste: post your /var/log/syslog to see at the errors on pastebin13:26
lesshastesolsTiCe, I suppose I will need to find old versions of this? I have to actually turn the computer off at the wall for get out of the proble13:27
lesshastem13:27
solsTiCeok13:27
lesshasteah ok.. I found where they live.  OK I will do this when i can log back in (it's not here now)13:27
lesshastethanks13:28
solsTiCethe problem is still there after a reboot ?13:28
jaccoguys, I have to go13:28
jaccobb all13:28
jaccosee ya13:28
lesshastesolsTiCe, on one occasion it didn't seem to come back up fully  after a soft reboot13:28
lesshastesolsTiCe, maybe it would have done if I had had more patience13:28
lesshasteit has to repair ext4 damage too13:29
solsTiCewell you better avoid using your cd ripper then. It seems to come from the module or the kernel13:31
lesshastesolsTiCe, ok.. so you don't think this would be caused by some hardware problem?13:34
lesshastesolsTiCe,  I built the machine myself :)13:34
lesshasteit would of course be nice if linux were robust in any case13:35
=== hackeron_ is now known as hackeron
phaenonmy volume is maxed out after every reboot, how do i fix this ?13:39
RobodudeMCphaenon: Try this, pacmd set-sink-volume 0 3276813:40
RobodudeMCThat last number is your default volume13:40
DFenikswhat would teoretically happen if i upgrade libglib2.0 from 2.26.1 to 2.31.8 on ubuntu 10.10 ?13:41
phaenon32k is max, so for half that i would use 16384 ?13:41
RobodudeMCIt seems so13:41
TJ-lesshaste: Are the CD drive and the hard disk connected on the same physical interface, such as being primary and slave devices on a single IDE PATA channel?13:41
phaenonrebooting13:41
lesshasteTJ-,  I wil check. If they are , what should I do?13:41
k1l_DFeniks: it will make trouble all the way. just install a clean supported ubuntu like 12.04 or 14.04 since you seem to not want to upgrade that often13:42
TJ-lesshaste: If they are it would explain the kernel error you're seeing - both devices using the same bus at the same time causing errors might suggests that the devices don't have their jumpers set correctly so one is master and the other slave, or that both device aren't set to use "cable select"13:43
yutuyutuhi everyone! is there a way to repair my usb filesystem witch contain all my files.13:43
lesshasteTJ-,  thanks! It is very likely I didn't set something correctly13:43
yutuyutu?13:43
RobodudeMCyutuyutu: What needs repairing13:43
lesshasteTJ-,  should they both be master?13:43
TJ-lesshaste: If they aren't both on the same interface/channel then that stuff won't matter, unless there are other devices also on those interfaces. IF they're SATA devices then none of that applies13:44
phaenonRobodudeMC, aint working .. tnx anyway13:44
yutuyutui run ubuntu live 14.10 and i work with initramfs13:44
RobodudeMCphaenon: Hmm...13:44
TJ-lesshaste: On a single IDE PATA channel, with 2 devices, one must be master and the other slave. If both are set to "cable select" instead they'll figure it out for themselves13:44
phaenonRobodudeMC, its just after reboot, when i press any of the vol buttens, the volume corrects itself.13:44
DFeniksi guess i will try to find if i can install nvidia-96 and maybe old x server and old kernel (if needed) on my 14.04 (i think it was 04) install then13:44
RobodudeMCphaenon: What version of ubuntu are you running?13:45
TJ-lesshaste: With one device on a channel then it should be master or 'cable select'13:45
phaenon14.04lts gnome13:45
DFeniksor maybe i will try all other video drivers maybe some will work normally13:45
lesshasteTJ-, thanks! I'll take a look and see what sort of mess i made :)13:45
k1l_DFeniks: try the opensource nvidia driver13:46
RobodudeMCphaenon: Do you have a dedicated sound card?13:46
Drac_KIshut13:47
Drac_KI#ubuntuindonesia13:47
phaenonRobodudeMC, lemme check13:47
yutuyutucan i use fsck on my usb drive with problems on initramfs?13:51
Drac_KIzz13:52
=== Donskoy is now known as Pharoah_Hound
koihello folks, been bashing my head against this all day. I set up samba shares a while back and wanted to add one more today, well my smb.conf doesnt seem to contain any of the share info and it wasnt set with nautalus.. the old shares work but i cant figure out where to alter em! help!13:52
michele993hi guy13:55
michele993what did this color ? http://www.pasteall.org/pic/8041213:55
daftykins!it | michele99313:57
ubottumichele993: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)13:57
michele993i speak english13:57
daftykinsnot so great judging from the above i'm afraid.13:58
EriC^^michele993: use photoshop or something to get the color from the png?13:58
michele993WHAT?13:59
EriC^^http://html-color-codes.info/colors-from-image/13:59
EriC^^michele993: use a tool to select a point on the image and get the color code from it13:59
michele993no i want to know14:00
michele993what do this choose of color14:00
daftykinsi'm sorry you don't make sense14:00
EriC^^like this http://pe-images.s3.amazonaws.com/photo-editing/neutral-gray/photoshop-color-sampler-tool.gif14:00
michele993in aspect of ubunt14:00
warped-coderI'm having a big trouble since I updated my ubuntu this morning14:00
warped-coderI get this message: The system is running in a low-graphics mode14:01
warped-coderthe only way to get it running is to remove all the nvidia drivers14:01
koihello folks, been bashing my head against this all day. I set up samba shares a while back and wanted to add one more today, well my smb.conf doesnt seem to contain any of the share info and it wasnt set with nautalus.. the old shares work but i cant figure out where to alter em! help!14:01
warped-coderbut this isn't an option, as I'm working on graphics programming14:01
michele993oh my god where is ins14:02
michele993xD14:02
daftykinswarped-coder: sounds like you installed nvidia drivers downloaded from the website before14:02
warped-codernope14:02
daftykinsinstead of packages14:02
michele993on my keyboard14:02
warped-coderI installed them from the additional drivers14:02
EriC^^michele993: it's you michele_ ?14:02
michele993yes14:02
EriC^^ah14:02
daftykinswarped-coder: is this a laptop?14:02
michele993you remember kworker14:02
michele993xD14:02
EriC^^yeah :D14:02
warped-coderdaftykins: yep, xps 1514:03
michele993help i don't found ins14:03
daftykinswarped-coder: nvidia optimus setup then?14:03
michele993when i write the text14:03
warped-coderdaftykins: not what I'm aware of (this is a custom installed ubuntu, not coming from dell)14:03
DJonesmichele993: It'll be the "insert" key, probably next to the home/delete/end keys14:03
warped-coderdaftykins: I thought it is too much hassle at the moment to install it14:03
daftykinswarped-coder: optimus is when you see both intel on-die graphics and the nvidia chip from "lspci"14:03
michele993ooh tahnks14:04
warped-coderdaftykins: let me check14:04
michele993shift +014:04
michele993thanks a lot14:04
michele993DJones :D14:04
DJonesmichele993: You're welcome14:04
EriC^^michele993: you want to make a screenshot?14:04
michele993in aspect i've found this button14:05
=== koi is now known as Luficer
michele993http://www.pasteall.org/pic/8041214:05
michele993what i does?14:05
michele993i select the color but i don't know what it does14:05
=== tom_ is now known as Guest36648
warped-coderdaftykins: i have VHA comaptible controller: Intel 4th Gen cCore Integrated Graphics controller rev 6 and 3d controller: NVIDIA...14:06
daftykinswarped-coder: and what version are you on?14:06
EriC^^michele993: ah14:07
=== kerosene is now known as UltimateHodor
warped-coderdaftykins: Ubuntu 14.10, nvidia-331-updates (i tried with just nvidia-current/current-updates/331)14:07
warped-coderdaftykins: I didn't install anything regarding the intel driver (they apparently don't have support for 14.10)14:08
daftykinswarped-coder: yeah you need to install nvidia-prime along with it14:08
EriC^^michele993: i think if you choose the wall paper as a color only that's the color of the background14:08
warped-coderdaftykins: ok, i'll give it a go14:08
warped-coderdaftykins: it says I already have it14:09
daftykinswarped-coder: you might want to run: sudo apt-get purge nvidia*14:09
EriC^^michele993: hold on14:09
warped-coderdaftykins: that's how I tried the previous installations, but it didn't work14:10
warped-coderdaftykins: but I'll try it again14:10
warped-coderdaftykins: however, after removing the nvidia drivers, the system becomes so sluggish as if there was no graphics acceleration at all14:11
warped-coderdaftykins: which driver do you suppose I should install?14:12
daftykinswarped-coder: there probably won't be, it'll be running on the intel only - *but* optimus setups don't use the nvidia chip for the desktop i don't think.14:12
EriC^^michele993: see this http://eeee.bshellz.net/Appearance_029.png14:12
EriC^^michele993: you have to select Colors & Gradients, and select one of them14:12
EriC^^i think that's what that box is for in your pic14:13
warped-coderdaftykins: don't think it is running on any acceleration at all, or windows is much better on intel than unity14:13
=== OLi is now known as Guest48350
warped-coderdaftykins: right, so I removed all nvidia drivers/packages. what next?14:13
daftykinswarped-coder: i can't comment on intel in 14.10 - i know nothing about it.14:13
daftykinswarped-coder: fresh boot14:13
Guest48350hi14:13
warped-coderok, so after reboot I have some decent speed (probably previously I didn't restart after removing the NVIDIA packages), so it's probably running on Intel14:16
warped-coderdaftykins: ok, so after reboot I have some decent speed (probably previously I didn't restart after removing the NVIDIA packages), so it's probably running on Intel14:16
k2gremlinSup all :)14:17
k2gremlinHi daftykins14:17
warped-coderdaftykins: oh my, now it's just frozen as it is14:17
daftykinsk2gremlin: o/14:17
karab44I've restored old ubuntu image and it's so far so good.14:19
michele993ahhh14:23
michele993eric^^ ok now i understand14:24
michele993:D14:24
michele993i'm personalizing ubuntu14:24
EriC^^:D14:24
UselessWolfhiho14:24
UselessWolfi installed ubuntu lts 1414:24
daftykinswarped-coder: after reboot?14:24
daftykinsUselessWolf: please ask a full question on one line14:24
UselessWolfand i just installed apache2 and apache dont start automaticly14:24
=== konrad is now known as Guest59440
daftykinsUselessWolf: confirmed by what method?14:26
daftykinsand do you mean at every boot?14:26
karab44BUG: soft lockup - CPU stuck for 22s! Bug #135655814:27
ubottubug 1356558 in linux (Ubuntu) "BUG: soft lockup - CPU stuck for 22s! [md3_raid1]" [Medium,Confirmed] https://launchpad.net/bugs/135655814:27
JkerzzSome=one here is = unity 3d programmer= ?14:27
karab44Jkerzz: #unity3d14:27
warped-coderwhat is the way to see what is the main driver?14:28
daftykinswarped-coder: install pastebinit and "pastebinit /var/log/Xorg.0.log"14:28
k2gremlinIs there a good chat room for ESXi?14:31
warped-coderdaftykins: http://paste.ubuntu.com/923329714:31
k2gremlinI tried #esxi and there is only 1 person there lol14:31
daftykins!alis | k2gremlin14:32
ubottuk2gremlin: alis is a services bot that can help you find channels. Read "/msg alis help list" . For more help or questions relating to alis, please join #freenode. Example usage: /msg alis list #ubuntu* or /msg alis list *http*14:32
=== hadoop is now known as Guest34299
JkerzzSome§one here is § unity 3d programmer§ ?14:32
daftykinsJkerzz: you've been told of a more appropriate channel to go to14:33
cfhowlettjkerning, !!!! #unity3d14:33
cfhowlettjkerzz, !!!! #unity3d sorry jkerning14:33
noiroAre ubuntu's servers down? I seem to be failing all apt-get updates with 404 errors but all other sites are fine14:34
cfhowlettnoiro, change your mirror14:34
noirocfhowlett, to what? Did they change?14:35
noiroit's like all ubuntu.archive.com/raring updates all 40414:35
daftykinswarped-coder: looks like intel and nouveau fire up, but nouveau fails on your hardware14:35
Piciraring has reached EOL14:35
cfhowlettnoiro, "they" ... mirrors are all over the world.  best to localize your sources14:35
Pici!raring | noiro14:35
ubottunoiro: Ubuntu 13.04 (Raring Ringtail) was the 18th release of Ubuntu. Support ended on January 27, 2014. See !eol, !upgrade and http://ubottu.com/y/raring14:35
cfhowlettnoiro, or install a currently supported version = suggest 14.04 for LTS14:36
DJonesnoiro: Raring is end of life, the repo's will have been removed sometime after January 201414:36
noirohow do I do a upgrade it in place?14:36
daftykins!eol | noiro14:36
ubottunoiro: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades14:36
charland1rs有人没?14:36
daftykins!cn14:36
ubottu如欲獲得中文的協助,請輸入 /join #ubuntu-cn 或 /join #ubuntu-tw14:36
cfhowlett!cn | charland1rs14:36
ubottucharland1rs: please see above14:36
charland1rs有中国人没14:36
warped-coderdaftykins: hmmm, up until today I was happily using the nvidia driver, so I haven't checked the noveau drivers at all14:36
noirodo I need to use a boot cd for a newer version or can I somehow update the entire distribution with it on?14:36
cfhowlettdaftykins, 1 what!  you have !cn on speed dial, don't you.14:36
cfhowlett!eolupgrade | noiro,14:37
ubottunoiro,: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades14:37
daftykinswarped-coder: yeah i know that, but there's a procedure here and step 1 was purging nvidia :)14:37
daftykinscfhowlett: :)14:37
roboteer_test14:37
daftykinscfhowlett: did that one already too ;)14:37
warped-coderdaftykins: I can't really stay on intel however, because I will need the 3D support for work (I'm working on 3d modelling software, so it's a bit shaky to use it with Intel :) )14:37
warped-coderdaftykins: yeah, I know, just wondering why noveau fails on my laptop, it's a std nvidia 750M14:38
Freddy__hi - is it still possible to do-release-upgrade from hardy to lucid ?14:38
daftykinswarped-coder: i know that too... the next step is trying to install prime again :)14:38
warped-coderdaftykins: so, what does the procedure says to do next?14:38
warped-coderdaftykins: just prime?14:38
warped-coderdaftykins: like, apt-get install nvidia-prime?14:38
ralph4100daftykins, if you remember from yesterday, I did end up getting past my efi problems by installing with efi mode set in bios. however, after an apparently successful install, was not able to boot ubuntu - put a rundown of my new issues here if you don't mind taking a look: http://ubuntuforums.org/showthread.php?t=225410014:38
daftykinswarped-coder: no i don't know if that'll pull in the appropriate packages... you can run it and pastebin it without agreeing if you like14:39
zykotick9Freddy__: if you're still on hardy, i'd suggest just backing up your data and re-installing...  too many version-upgrades required IMO14:39
vroomfondelcan "dd" accept an input file from stdin?14:40
cfhowlett!lucid | Freddy__,14:40
ubottuFreddy__,: Ubuntu 10.04 LTS (Lucid Lynx) was the twelfth release of Ubuntu.  Desktop support ended May 9 2013. Server support continues. See http://ubottu.com/y/lucid for more details.14:40
warped-coderdaftykins: ok14:40
=== Guest26838 is now known as GoTheuS
=== cal is now known as Guest66051
Freddy__zykotick9: ok - I have to have a lucid, though  - to backup via rdiff-backup from a lucid machine ...14:41
daftykinsralph4100: do you recall if it had the black boot screen at first?14:41
daftykinsblack and white text menu14:41
zykotick9Freddy__: i see.  well, see info above about EOL updating then.  good luck.14:41
ralph4100_daftykins: by at first do you mean my first attempt at booting after install?14:42
daftykinsralph4100_: no, when booting installation media14:42
ralph4100_or do you mean before I end up in busybox/intramfs?14:42
Freddy__zykotick9: ubottu thanx14:42
ralph4100_daftykins: when I startup I get a lenovo logo for a sec, then the grub menu, then a blank purple screen for a while until it shifts to busybox/intramfs14:43
warped-coderdaftykins: here http://paste.ubuntu.com/923342414:43
warped-coderdaftykins: brb14:43
vroomfondeldoing a "unzip -p myzipfile.zip | dd if=- of=/dev/sdc" doesn't accept stdin as input. is there another way ?14:44
k2gremlinInteresting, my plex server dropped from 12watts idle to around 3 watts idle after the update I did to it this morning lol14:44
daftykinswarped-coder: yeah i wouldn't have installed it there, i think it needs partnering up with a driver as per a guide online (maybe try nvidia-319)14:44
daftykinsk2gremlin: this isn't a channel for off topic chat i'm afraid, support only. #ubuntu-offtopic for that14:45
k2gremlinSorry man14:45
daftykinsralph4100_: hrmm i wouldn't think it likely but maybe it doesn't like you having so many partitions14:46
daftykinsralph4100_: hrmm hang on do you mind booting into a live session and coming back on here again from it?14:46
MacroManI have read advice saying it's best to turn off DNS recursion in Bind9.14:47
TJ-vroomfondel: just omit any mention of if= and dd will read stdin. e.g. echo "test" | dd of=/tmp/test.dd.txt14:50
vroomfondelthanks, just read the manpage14:51
ralph4100_daftykins: I'm actually booted into the real install via the grub console commands right now14:52
ralph4100_daftykins, would that work as well?14:53
daftykinsralph4100_: oh so you have to manually do it then it's fine? have you tried an update-grub since?14:53
daftykins"sudo update-grub"14:53
warped-coderdaftykins: do you think 319 is a safer choice?14:53
ralph4100_daftykins: I ran boot-repair and it repaired my grub menu14:53
daftykinswarped-coder: just try a few versions, no harm in it14:54
ralph4100_daftykins, but still wouldn't let me boot14:54
ralph4100_daftykins, will update-grub do something different?14:54
daftykinsralph4100_: but yeah this is a totally silly idea but if you could run "sudo apt-get update && sudo apt-get install smartmontools pastebinit" then "sudo smartctl -a /dev/sdb | pastebinit"14:54
schoppenhauerhello. I noticed that "sux" is removed from ubuntu. how can I (without having to mess around manually with xauth) su to another user and xauthing it?14:54
ralph4100_daftykins, last time I ran update-grub windows was missing from my grub menu14:54
daftykinsralph4100_: i would hope that last time it was down to the mix of legacy and EFI14:54
TJ-ralph4100: weird that the busybox screenshot is showing hard drive errors (unable to communicate)14:55
daftykinsTJ-: yeah i spotted that, wanted to confirm SMART - but i think it might be more kernel related than bad disk14:55
nana_kj14:55
nana_hallo14:55
hyliannana_: hello14:55
nana_wie geht es dir ?14:55
warped-coderdaftykins: nvidia-319 or -updates?14:56
hyliannana_: only speak english, sorry.14:56
DJones!de | nana_14:56
ubottunana_: In den meisten Ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuche bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Einfach "/join #ubuntu-de" eingeben. Danke für Dein Verständnis!14:56
nana_i am looking for a software to manage my cybercafe14:56
nana_can some body help me?14:56
daftykinswarped-coder: whichever you feel like typing :>14:56
hyliannana_: that's a vague question, could you be more specific? Looking for net usage control, for instance?14:57
ralph4100daftykins, here are results http://paste.ubuntu.com/9233651/14:57
Deepfriedicenana_: What are you wanting to do?14:57
ralph4100TJ, yes - I was getting a lot of /by-uuid missing errors before logging in via setting the partition/kernel/initrd manually in grub console14:58
TJ-daftykins: ralph4100 Could be an issue with AHCI/RAID/IDE mode selected for the drive channel, in the firmware, but not clear why a manual boot works unless it is trying to read beyond end of disk (sector failing is 1,859,152,224)14:58
daftykinsralph4100: hrmm, you have 4 pending sectors which means your disk has been found to have some issues, you should back it up ideally14:58
ralph4100daftykins, I did do a system image yesterday - so I'm good there. have spilled drinks twice on laptop but has still worked, maybe that? haha14:58
daftykinsralph4100: lol oh dear that's not good.14:59
adscis there a recommended passphrase generator for encrypting LVM partitions? Or other guidelines I should follow?14:59
nana_i want to control the time that a custumer take to connect to a computer. to control printers14:59
TJ-daftykins: ralph4100: also, I wonder if the drive has a HPA (host protected area) that was disabled originally and is now enabled, causing reads near the end of the drive to fail - that can happen when otherwise identically size drives are swapped in14:59
daftykinsTJ-: ralph4100 i don't really like how messy and numerous the partitions are - if it were me i'd nuke the entire disk and clean install win8.1 followed by ubuntu with a more sane partition layout - sound like overkill?14:59
TJ-daftykins: Yes :p14:59
daftykinshah14:59
daftykinswell the disk is faulty now14:59
daftykinsso it needs more serious action15:00
daftykinsralph4100: when i get disks with pending sectors i zero fill them to force the drive to remap any others that have issues15:00
ralph4100hmm ... would prefer to avoid if possible as lots of things setup on windows15:00
compdocdaftykins, bad idea15:00
daftykinscompdoc: no it's not.15:00
roboteer_test15:00
compdocyeah, its really dumb15:00
warped-coderdaftykins: I ran the command apt-get install nvidia-319, and looking at the output it seems that it installs bits of 331 for some reason (like: setting up nvidia-319 (331.89-0ubuntu5)) and such. is that healthy?15:00
ralph4100daftykins - maybe I could format some of the system partitions that are for easy recovery?15:00
daftykinsroboteer_: i'd like you to stop that today.15:01
daftykinscompdoc: 100% disagree with you15:01
jmaderohi all - last night I ran the exact same rsync command twice - my understanding was after the first time, nothing else should be transfered (as nothing new was added), instead I see literally the same output of >f..T..... both times15:01
jmaderowhich implies that the files were sent twice15:01
compdocthe drive should have no pending or reallocted sectors. if it does, its dying15:01
daftykinscompdoc: not always - forcing it to fully remap lets you find out if it's a small set or a more serious problem15:02
daftykinsif the user has backups it's a non-issue15:02
daftykinsralph4100: yeah that'd be good, to reduce how many of them there are... although i think the EFI spec needs to keep at least 4 in total for Windows15:03
daftykinsralph4100: i note that your system has that separate SSD as well, which is presumably transparent to Windows - it's kind of odd ubuntu hasn't tried to do anything with it for boot15:04
icebrainhi, is there any way to recover a system that's missing a bunch of files in /bin (bash, rm, tar, etc) without having to reinstall the whole system?15:04
warped-coderdaftykins: same results with installing 319 :(15:04
daftykinsicebrain: not really15:04
ralph4100daftykins - yes supposedly that is used to speed up boot w/ windows although I'm not sure if it is working15:04
daftykinswarped-coder: as in, low graphics message?15:04
Deepfriediceicebrain: Re-installing would almost definitely be easier15:05
daftykinsicebrain: +1 to Deepfriedice15:05
ralph4100daftykins, one question I have is - regarding the boot-repair message to try to set up a boot partition at the beginning of the disk - how do I know whether I can safely do that since there is a small system partition currently there?15:05
icebraindaftykins, Deepfriedice: I feared so. Damn power loss :|15:05
icebrainthanks15:05
Deepfriediceicebrain: Do you have /home on a different partition?15:06
warped-coderdaftykins: yep15:06
daftykinsralph4100: well, since your disk's health is questionable right now i would say all these suggestions are moot. you really need to buy a new disk as priority #115:06
no1_is there a way to install w3af 1.6 in ubuntu 14.10?15:06
daftykins!info w3af15:07
ubottuw3af (source: w3af): framework to find and exploit web application vulnerabilities. In component universe, is extra. Version 1.1svn5547-1 (utopic), package size 342 kB, installed size 1096 kB15:07
ralph4100daftykins - what are you seeing in the results that shows it is questionable? also - if it is questionable that could explain problems I''ve been having in windows where system locks up with high disk activity15:07
daftykinsno1_: maybe if you find a PPA, but bear in mind !ppa15:07
TJ-ralph4100: daftykins drive is shown as 931.51 GiB which is 1,000,201,246,474.24 bytes, so sector 1859152224 is either (512 bytes) offset to 951,885,938,688 or (2048 bytes) 3,807,543,754,752 - that suggests 512 byte sectors, and puts 1859152224 at 886GiB at end of sdb7 or beginning of sdb815:07
OLihewlli15:07
daftykinsralph4100: oh dear, yes that sounds bad. check out line 74 - ID#197 Current Pending Sector, also 58 ID #1 Raw_Read_Error_rate15:07
OLioops15:07
OLihello15:07
OLimy fellow nerdsa15:08
=== OLi is now known as Guest38437
Guest38437guest15:08
Guest38437pls i own this15:08
daftykinsGuest38437: stop spamming please15:08
Guest38437ok sorry sir.15:08
warped-coderdaftykins: the xorg log:  http://paste.ubuntu.com/923380715:08
icebrainDeepfriedice: nope, unfortunately15:09
no1_actually version 1.2 which is from default repos is freezing. Any way to fix it?15:09
icebrainDeepfriedice: I do have a backup NAS, so I guess I'll copy everything to it and then back after reinstallation15:09
ralph4100daftykins, not a linux question but how easy is replacing a laptop hard drive? never done that15:09
daftykinswarped-coder: ah, you have a xorg.conf ! please run "sudo rm /etc/X11/xorg.conf /etc/X11/xorg.conf.old" and reboot15:09
rsyringI'm noticing that Firefox 33 on 14.04 is suddenly extremely slow making networking connections.  More info here: https://support.mozilla.org/en-US/questions/1032875  Anyone else experiencing this or have ideas?15:09
Deepfriediceicebrain: If you're going to re-install, I really really really recomend splitting /home of onto it's own partition. That way if this happens again re-installing will be much simpler.15:10
daftykinsralph4100: sometimes you can see a little hatch on the underside of the laptop, a few screws and you're in15:10
samuel_demtria15:10
daftykinsralph4100: i'd say that - depending on the given model (they're not always that accessible) HDD and RAM are usually the easiest things you can do15:10
rsyringIt seemed like it might have started after I applied pending updates yesterday, but I'm not 100% sure there is a connection there.15:10
oliiiiiiiim back guys15:10
dr-sherthi15:10
daftykinsoliiiiiii: either ask an ubuntu support question or leave please15:11
gregfrankhello room15:11
usr13daftykins: Why would he also need to remove the xorg.conf.old file?15:11
ralph4100daftykins: so given the output you saw and that my windows install has been locking up with unexplained high disk activity - what probability would you give that that is the root cause of my issues w/ install?15:11
daftykinsusr13: you misread15:11
usr13o15:11
daftykinsusr13: ah no, i mistyped! good catch :)15:12
daftykinswarped-coder: sorry i meant "sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old"15:12
dinosaur_ikonia: it was me who wanted to install exim - and yes it was necessary to install daemon-heavy or daemon-light15:12
daftykinswarped-coder: doesn't matter either way though if you already ran it.15:12
usr13daftykins: Well, no big deal. Just as well to delete it.15:13
ikoniadinosaur_: errr great15:13
gregfrankproblem with home server interfaces configs15:14
dinosaur_ikonia: I managed to install an exim server which would deliver mails locally. But now I would like to configure it to deliver them to my pseudo-network. I don't know how to do that.15:14
daftykinsralph4100: well, it's definitely not helping. but i really don't like that messy disk layout either15:14
dinosaur_ikonia: that is, the Internet should be treated as non-existen for exim15:14
daftykinsralph4100: it's possible ubuntu installed something important into a now-bad area of the disk15:14
ikoniadinosaur_: what ? exim is all over the internet15:15
dinosaur_all what it should see should be the pseudo-network15:15
=== phirez is now known as ZerOlegend-lappy
ralph4100daftykins: before I go buying new equipment - is it possible to try an install from an external usb hdd for diagnosing purposes?15:15
dinosaur_ikonia: would not be it possible to make a network consisting of, let's say, 5 computers (a network separated from the Internet) and then set up one of them as an exim mail server?15:15
ralph4100is that even possible15:16
daftykinsralph4100: as in test installing ubuntu to a USB HDD?15:16
ralph4100daftykins, right - see if everything works when it isn't my primary hdd15:16
cwarnerIs there a way to get the original manifest of a ubuntu install? i need to see what packages have been added to an install15:16
ralph4100daftykins, or does that throw to many variables in it to actually isolate the primary hdd15:16
ikonia$nicks hoverboarddinosaur_ yes, that's called smart relay, as long as that 1 computer can get to another mail server with internet access/or the internet directly15:17
daftykinsralph4100: i don't know how to make this any clearer really :) your disk is faulty, you have to change it *regardless* of things you can't get working right now :)15:17
ralph4100daftykins lol ok15:17
ikoniaoops15:17
daftykinsit's dead, Jim15:17
ikoniadinosaur_: es, that's called smart relay, as long as that 1 computer can get to another mail server with internet access/or the internet directly15:17
daftykinsralph4100: you can certainly do it if you want to waste the time, but you'd idealy need to remove the HDD + SSD, plus the external USB HDD would need to be blank15:17
UselessWolfhosts.allow if i type in sshd: 192.168.0.22 i just can reach the sshd demon from that ip am i right?15:18
daftykinsso hopefully you don't use it for your backups15:18
cfhowlettcwarner, read the manifest on the ISO or dpkg -l | grep installed15:18
ikoniaUselessWolf: you should define it's listen address in the sshd_config15:18
dinosaur_ikonia: But I know that there are networks which are completely separated from the Internet and yet they have mail server (of course this mail server enables you only sending mails between the computers in your network). I need such a solution. Isn't is possible to do it with exim?15:18
ikoniadinosaur_: re-read what I said15:18
greg_1hello guys15:18
ikoniadinosaur_: yes you can do that, but you need either a.) the exim server to have direct access to the internet b.) the exim server to have access to another mail server to relay through to send to the internet15:19
warped-coderdaftykins: right, I'm still in the low graphics menu, after removing all xorg.conf and xorg.conf.old15:19
dinosaur_ikonia: I did read it, but it is not what I'm looking for. And your response to my question is basically "no", but I believe you are wrong because I know such networks.15:19
warped-coderdaftykins: I guess that's not what we expected to get15:19
daftykinswarped-coder: hrmm, try different versions15:19
ikoniadinosaur_: no you don't15:19
dinosaur_ikonia: however, I'm not sure if they are running exim15:19
Grey_LokiHi. When swapping a machine's motherboard out for another (but keeping HDD and peripherals), what considerations need to be made to keep the system running? Having done the swap, the machine boots to desktop straightaway, all peripherals (USB, network, etc) seem to be detected.15:19
Grey_LokiIs any cleanup required?15:19
ikoniadinosaur_: a mail server of any sort cannot send mail to the internet unless it has a.) access to the internet b.) access to another mail server that it can relay through to the internet15:20
daftykinsGrey_Loki: no15:20
dinosaur_ikonia: but I do not want it to send mails to the Internet. I want it to be able to send mail to my own network.15:20
ikoniadinosaur_: then thats fine15:20
ikoniadinosaur_: you don't need any internet access or smart host15:20
Grey_Lokidaftykins: neat. Do you have a link to anything which explains why? I was exepcting i'd be having to get into the internals of the system and surgically remove old drivers etc15:20
ikoniadinosaur_: you can send internally just fine15:20
UselessWolf#ListenAddress ::15:21
UselessWolf#ListenAddress 0.0.0.0  if i put there both my static ips that work?15:21
daftykinsGrey_Loki: i don't need links or articles for hardware sense :) obviously you would have had to have removed drivers if you changed graphics type, but you've not detailed whether a card stayed the same or whether there's onboard graphics15:21
UselessWolfikonia15:21
dinosaur_ikonia: OK, I'll be working on that. If you happen to know how to do it, then I'll be happy to listen your explanation. I'll by trying for myself, anyway.15:21
usr13Grey_Loki: Driver modules are automatically loaded.15:21
TJ-Grey_Loki: Possibly. If there are persistent network interfaces names set in "/etc/udev/rules.d/70-persistent-net.rules" you may need to remove/amend them to match the new MAC addresses15:21
usr13Grey_Loki: If it is not broke, don't fix it.15:22
ikoniadinosaur_ just need a valid name resolution on each mail server and a mail server listening on each host for local delivery, then user@hostname as a mail address15:22
Grey_Lokidaftykins: swaps from onboard to onboard :)15:22
Grey_LokiTJ-: nothing like that going on.15:22
TJ-Grey_Loki: Same goes for any bluetooth HCI; you may need to edit directory names and entries in "/var/lib/bluetooth/"15:22
daftykinsintel on-die graphics?15:22
Grey_Lokiusr13: butbut, perhaps I could make it BETTER! :D15:22
daftykinsGrey_Loki: just be happy it all works and go enjoy.15:23
usr13Grey_Loki: perhaps it's ok15:23
Grey_Lokidaftykins: older; HD3200 based onboard GPU :)15:24
dinosaur_ikonia: thanks. I do not exactly know how to do that, but I'll try.15:24
* Grey_Loki smiles15:24
Grey_LokiAlright, thanks for your advice everyone :)15:24
TJ-Grey_Loki: The persistent net names are automatically created by Udev unless you're specifically disabled that, so swapping a mobo with on-board ethernet ports would leave an entry that'd likely cause the port to be named slightly differently. Could also occur if you're using biosdevnames or systemd15:24
cwarnerso I have to compare the original manifest with a dpkg --list and then filter out what has been added and what hasn't? to get a list of packages installed..15:25
greg_1problem with interfaces config15:25
don_Someone here with experience of Bind9? I need some help please.15:26
cwarnerseems like something dpkg could likely keep track of.. this has to be an option somewhere15:26
daftykinscwarner: can't remember the command but i believe there was a dpkg --get-selections15:26
cfhowlettcwarner, that would do it.  there's also a dpkg command sorted by date.  you could see your zero - state and sort for additions15:26
=== Gremlin_ is now known as k2gremlin
cwarneryeah in this case that won't work the problem is that I'm dealing with a large set of installs and don't have a good sense of timelines or when things were spun up.. another problem is that I need to figure out the original manifest for all these disparate installs and a proper location to grab them15:28
warped-coderdaftykins: I don't think this is a version issue with the nvidia driver. It was working just this morning with 331, if I remember well15:28
warped-coderdaftykins: but now it doesn't work with 319, 310, 331, 30415:28
daftykinswarped-coder: what does Xorg.0.log look like now?15:29
SJupgradehello, can i have some advise for error upgrading from 12.04 to 14.04 from update manager?15:29
cwarnermy time would be better spent patching dpkg it seems15:29
warped-coderdaftykins: the very same: the error is that Undefined Screen "nvidia" referenced by ServerLayout "layout".15:30
daftykinshrmm15:30
cfhowlettcwarner, http://askubuntu.com/questions/9135/how-to-backup-settings-and-list-of-installed-packages15:30
warped-coderdaftykins: it's like the nvidia driver doesn't start before X, or something like that15:30
cfhowlettcwarner, also see   http://www.kingletas.com/2012/07/restore-ubuntu-to-the-default-settings-without-re-installing-it.html15:31
=== lobo is now known as Guest41291
=== Guest41291 is now known as lObo1
daftykinswarped-coder: i don't think so, i think this one's beyond me then i'm afraid. i would purge nvidia* again, reboot and ask again15:31
daftykinsmaybe someone else has better prime experience15:31
greg_1does anyone know about the interfaces config15:32
warped-coderwell, I'll try15:32
cwarnercfhowlett: yeah all of these would work for one off cases or lets say a small amount of systems.. i'm dealing with 2,000 plus ubuntu installs so pulling manifest and then diff'n will be slow and cumbersome15:33
TJ-warped-coder: You're getting a failure in Xorg.0.log even when "/etc/X11/xorg.conf" has been removed?15:33
cfhowlettcwarner, ah, it's THAT kind of party!  I assumed (silly me) your systems were cloned.  sorry.15:34
daftykinsgreg_1: yes but until you pastebin a config and ask a question about it nobody can help :)15:34
daftykins!paste | greg_115:34
ubottugreg_1: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.15:34
warped-coderTJ-: yes15:34
TJ-cwarner: They're not controlled by puppet/chef/ansible/salt/landscape ?15:34
greg_1sorry newbie here15:34
cwarnercfhowlett: yeah.. i think the best approach would be to patch dpkg.. i'll try to sort something out and see what the deal is15:34
joaojeronimowhen I create a system user acount with no shell "useradd -s /bin/false -r -M <username>", if I want to use it only for tunneling, I still need a home directory to store .ssh/authorized_keys right ?15:34
cfhowlettcwarner, I feelz for you.  good luck.15:35
TJ-warped-coder: Can you do "sudo service lightdm restart" then pastebin the latest "/var/log/Xorg.0.log"15:35
warped-coderTJ-: sure15:35
cwarnerTJ-: they are but waltzing through 2,000 plus nodes running multiple gets, sorts and diffs is a waste of resources15:35
greg_1 having a problem  with the static  ip address15:36
cwarnercfhowlett: no biggie.. thanks for the scouting though I appreciate it15:36
cfhowlettcwarner, happy2help15:36
TJ-cwarner: The config management tool should already know which packages are installed and how they're configured15:37
DammitJimis there a place that shows what major corporations or large operations use Ubuntu Server?15:37
cfhowlettDammitJim, there are several case studies on the canonical site.15:37
DammitJimcanonical? got it, thanks.. if anyone has a direct link, please provide as I am trying to get management to switch us from Red Hat15:38
daftykinsgreg_1: yeah so what have you tried? what have you typed? what's going wrong? we can't read minds :)15:38
cfhowlettDammitJim, https://insights.ubuntu.com/case-studies/15:38
cwarnerTJ-: sure, that works when you have a config management service keeping track of your installs.. when you don't and need to figure it out.. this is where I'm standing15:39
greg_1excuses me i am new to this so you dont need to be so rude15:39
daftykinsgreg_1: sorry, it wasn't meant to be taken so. but you're not really giving us much details to go on15:40
ZerOlegend-lappyso greg_1  you want to assign your network as static?15:40
greg_1how do you find address network broadcast and gateway15:40
ZerOlegend-lappywhat is your local lan address?15:40
daftykinsgreg_1: if you're on your home network, you'll know it from how your router is addressed15:41
ZerOlegend-lappyif you are lets say 192.168.1.5 then your gateway your broadcast is 255.255.255.0 and gateway 192.168.1.115:41
jes_#oejlug15:41
warped-coderTJ-: ok, so I'm installing 331 and then do the lightgdm restart15:43
somsipgreg_1: route -v15:43
daftykinswarped-coder: *lightdm15:43
greg_1i  192.168.1.1 no work cant ping it15:43
TJ-cwarner: I thought you'd said they are managed (" they are but...") - in which case I'd deploy a script to each that collects the additional info needed. Otherwise it will require a diff between the tasksel list and what  debfoster reports15:43
warped-coderdaftykins: that15:43
ZerOlegend-lappygreg_1, that was an example15:44
somsipgreg_1: route -v15:44
ZerOlegend-lappytype ifconfig in terminal15:44
DammitJimhhhmmmm... no list per se15:44
elderekoI have ubuntu installed on Macbook pro and just installed the proprietary Nvidia graphics driver and now i get a segfault starting X... how can I switch back to the default Nouveau driver from root shell?15:44
cwarnerTJ-: right, the deploy a script part of that equation just isn't what I want to do as it's not going to get everything.. If someone installs a package afterwards I don't get that info, it's just not fast enough.. need to figure something else out15:46
cwarneri'll most likely end up having to patch dpkg to store this stuff in config management db/service15:46
TJ-cwarner: What are you using, Puppet?15:48
warped-coderTJ-: yeah, it's always the same nvdiai referenced by server layout15:49
cwarnerTJ-: a mix of ansible and chef.. getting ride of chef.. not sure if ansible tower will be purchased15:49
greg_1nothing working cant use ping15:50
lasdamhello. how can I get rights to certain (text) files from programs run from the gnome-menu, I assume under the default user? in particular I'm trying to access a php file for reading and writing from /var/www in various text editors. I tried chowning all files in /var/www with www-data:www-data, and add my default user to the www-data group, but that doesn't seem to have helped15:50
cwarnerdpkg with an option to stash info in a cmdb or something like that would work.. we'd run dpkg to post the info anytime a pcakage is installed15:50
warped-coderTJ-: and the xorg.conf (after deleting it and restarting the lightdm service) looks like this: http://paste.ubuntu.com/923443515:51
cwarnerthen I could slurp up all the info from the cmdb15:51
warped-coderthere's only intel screen in it, no nvidia indeed15:51
zykotick9lasdam: did you log out and back in after adding the group to your user?15:51
lasdamzykotick9: yes15:51
cwarnerif anything changes in the timeframe it'd be easier to poll and deal with that at the cmdb15:51
lasdamand /etc/groups reads: www-data:x:33:myusername15:53
zykotick9lasdam: but that doesn't matter, if you haven't logged out and back in... thus why i asked.15:54
lasdamzykotick9: and I'm telling you I have :P still no results15:54
cwarnerhrmm maybe just redis in the meantime15:55
greg_1anyone want to help a newbie one on one15:57
zykotick9greg_1: if you ask a question perhaps the channel could help you (it's safer having the peer-review of information being given)15:58
jhutchinsgreg_1: Generally it's best to ask a question openly, that way anybody who knows the answer can help, and anybody who doesn't can learn.15:58
jhutchinsgreg_1: What did you try to do?  How did you try to do it?  What did you expect to happen?  What happened instead?15:58
jhutchinszykotick9: That's a good way of putting it.15:59
greg_1trying to setup a home sever15:59
greg_1having trouble with statice ip setting15:59
greg_1like i said i new to this and linux16:00
adscis it possible to get the LVM encryption setup process from installation running post-install?16:00
adsci accidentially selected without encryption16:00
greg_1address network ect16:01
OerHekshttps://help.ubuntu.com/lts/serverguide/16:01
greg_1read the guides16:01
zykotick9adsc: reinstalling would certainly be the easiest way to get there...  best of luck.  i've personally only done encrypted-lvm from install, so i have no suggestions on trying after the install.16:02
warped-coderTJ-: daftykins: well, I followed up by checking the dmesg, and I found that module verification failed: signature and/or required key missing - trainting kernel16:03
TJ-warped-coder: Looks like nvidia-xsettings is auto-generating an xorg.conf, is that correct? It also looks to be for an Optimus config (nvidia+intel), and is missing the nvidia screen definition16:03
adscthe problem is the stupid vsphere crap web tool doesn't let me reconnect the DVD image16:03
adscgreg_1: you just have to edit /etc/network/interfaces, it's pretty simple16:03
TJ-warped-coder: That is expected since the nvidia module is built on the PC not pre-built by the Ubuntu servers, and therefore cannot be signed16:04
greg_1ok tryed that can ping or got a outside connection16:04
lasdamzykotick9: could the problem be 644 permissions? anything else that could cause this or that I've ignored? (I'm fairly newbish)16:05
warped-coderTJ-: when I ran nvidia-xconfig --query-gpu-info, I got the error: "couldn't insert 'nvidia_331': Unknown symbol in module, or unknown parameter (see dmesg)"16:06
zykotick9lasdam: ya, that 4 for group won't give you write access16:06
warped-coderTJ-: and when I ran dmesg | grep nvidia, i get the signature issue and  unknown symbol mcount (err 0), if this helps16:06
TJ-warped-coder: what does "uname -r" report?16:07
warped-coder3.16.0-25-generic16:08
lasdamzykotick9: 4? what other ways can I get write access other than changing the files permissions or running programs as root?16:08
zykotick9lasdam: "sudo chmod g+w foo" might fix your issue16:08
TJ-warped-coder: And does this "ls /lib/modules/`uname -r`/updates/dkms/"  list the "nvidia_331.ko"  module?16:08
=== Vgn|away is now known as Vogone
zykotick9lasdam: you said 644, well the 6 is owner permission, then the first four is group, and the last four is other (everyone else)16:09
warped-coderTJ-: yep, and nvidia-331-uvm.ko too16:10
lasdamzykotick9: right! I got it now, thanks. your solution also works. I forgot that the middle number is actually group permissions :P16:10
andreas_Hello! I just installed Ubuntu (I got it recomended) but I have two problems, I was tould it would dual-boot with windows, but I can't get any bootscreen? it goes straight into Ubuntu, also it's super slow on my fast computer16:10
andreas_(I have Windows and Ubuntu on two different SSDs16:11
lasdamzykotick9: thanks alot*16:11
zykotick9lasdam: glad to help16:11
greg_1no help16:11
TJ-warped-coder: The mcount error usually is caused by the module being built by the wrong version of the gcc compiler, but if you using a stock ubuntu release then that wouldn't make sense. Have you installed any build tools recently that could be taking precedence?16:12
elderekoI have ubuntu installed on Macbook pro and just installed the proprietary Nvidia graphics driver and now i get a segfault starting X... how can I switch back to the default Nouveau driver from root shell?16:13
adscgreg_1: post the contents of your /etc/network/interfaces file and the output of ifconfig on some pastebin16:13
TJ-warped-coder: The other possibility is building against the wrong version of kernel headers (packages linux-headers-*)16:15
warped-coderTJ-: I have two gcc on my machine16:15
andreas_can any one help?16:16
joe_brhello!16:16
warped-coderTJ-: and the default is 4.4.716:16
warped-codercould that be the problem?16:16
warped-coderand how do I check which linux headers are used?16:17
joe_brI have a LG notebook with windows 8, and it has UEFI16:17
joe_brI already followed the ubuntu UEFI guide, but I can not boot from my usb flash drive16:17
joe_brI also tryed three usb sticks, without sucess16:18
joe_brdo you have any idea?16:18
TJ-warped-coder: When the dkms build of the nvidia module is done, a log file is stored in /var/lib/dkms/${MODULE_NAME)/$(MODULE_VERSION)/$(KERNEL_VERSION)/$(ARCH)/log/16:20
warped-coderTJ-: I'll set it to the stock gcc-4.9 and see what's going to happen if I reinstall the nvidia modules (after purge, of course)16:21
AmaleshHi I  have installed openjdk 7 on my ubuntu , when I run the command javac hello.java , I get a message saying javac can be found in openjdk 716:25
AmaleshI dont understand whther openjdk is installed on ma PC16:25
Amaleshplease help16:25
=== Anoniem4l`afk is now known as Anoniem4l
=== Alexandro is now known as Alessandro|AFK
AmaleshAnybody there ?16:27
=== Alessandro|AFK is now known as Alessandro|BNC
compdocnope16:27
=== Alessandro|BNC is now known as Alexandro
AmaleshHi compdoc ,any experience in installing openjdk- 7-jdk?16:28
compdocno, afraid not16:28
Amaleshok16:28
compdocbut there are otrhers here - wait a bit16:29
Amaleshokay sure16:29
compdoctheres also a mailing list16:29
nacitarHow can I personally retrieve the core dump for an application not installed by apt, from the "Sorry, Ubuntu has experienced an internal error" window?  All i can see there is CoreDump ==> (binary data)16:29
Amaleshcould you please let me know the mailing list compdoc16:29
TJ-nacitar: You've got the crash-dump file in "/var/crash/" ?16:30
nacitarTJ-: yep, had no idea that folder existed, exactly what i need16:30
compdochttps://lists.ubuntu.com/16:30
nacitarTJ-: thanks a lot16:30
Amaleshthanks compdoc :)16:31
compdocactaully, you want this:    https://lists.ubuntu.com/mailman/listinfo/ubuntu-users16:31
compdocthe ubuntu-users list16:31
TJ-Amalesh: Does "which javac" report something?16:31
TJ-Amalesh: If so, then check what it points to with "update-alternatives --display javac"16:33
AmaleshI have installed openjdk-7-jdk.But when I tried to compile a java program by giving a  command " javac Hello.java". I got an message16:33
AmaleshThe program 'javac' can be found in the following packages:16:33
Amalesh * default-jdk16:33
Amalesh * ecj16:33
Amalesh * gcj-4.6-jdk16:33
Amalesh * gcj-4.7-jdk16:33
unopasteAmalesh you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted16:33
daftykins!info openjdk-7-jdk16:34
ubottuopenjdk-7-jdk (source: openjdk-7): OpenJDK Development Kit (JDK). In component main, is optional. Version 7u71-2.5.3-0ubuntu1 (utopic), package size 15922 kB, installed size 20373 kB16:34
OerHeks" sudo update-alternatives --config java  "  might solve choosing the right java16:34
nacitarCan an ubuntu .crash file be converted to a regular core dump so gdb can be happy with it?16:34
TJ-OerHeks: It's javac (the compiler), not java (the vm)16:34
TJ-nacitar: gdb reads the dumps; see for example https://wiki.ubuntu.com/DebuggingProgramCrash16:37
warped-coderTJ-: it's alive!16:38
TJ-nacitar: To do it manually you'll need to unpack the apport creash file using "apport-unpack"16:38
TJ-warped-coder: great news :)16:38
nacitarTJ-: that's what i was missing from the docs, thanks.16:38
mibr001i have a problem with my keyboard shortcut Fn + F12 to increase volume if i change the keyboard shortcut it works16:39
warped-coderTJ-: there should have been a warning that the version of gcc isn't right, when installing the nvidia driver package16:39
TJ-nacitar: See https://wiki.ubuntu.com/Apport#I.27m_a_developer._How_do_I_use_these_crash_reports.3F16:39
TJ-warped-coder: It doesn't know that ... it depends on hundreds of options16:39
warped-coderTJ-: it's a simple "gcc --version" command to check, so it could be implemented16:40
warped-coderTJ-: IMHO16:40
TJ-warped-coder: No, it isn't. It depends not on the version but on what configuration options the version used, which vary (as you found out). The version/options used to build the module must be identical to that used to build the kernel itself16:41
zonettiI'm trying to configure gammu, but I can't find my modem at /dev/ttyUSB*.. I don't see any /dev/ttyUSB* at all.. does anyone know why?16:42
AmaleshOerHeks, I have tried out the command you had said , kindly hav a look at the result here http://paste.ubuntu.com/9235182/16:43
=== ubuntu is now known as Guest38567
TJ-zonetti: what kind of modem is it, cellular?16:44
zonettiTJ-, huawei e155216:44
TJ-zonetti: Check "/var/log/kern.log" - you'll probably find it has presented a CDC_Ethernet device not a serial device16:45
OerHeksAmalesh, so you have not installed openjdk716:45
zonettiTJ-, I got: ... [sdb] Attached SCSI removable disk16:46
zonettididn't get "serial" in the output16:46
leeyaahello16:46
TJ-zonetti: So maybe you need to have usb_modeswitch do its magic in order for the device to present its network/serial interfaces?16:47
AmaleshHow do I check whether it is installed, I had used the command sudo apt-get install openjdk-7-jdk16:47
leeyaahow far behind is ubuntu from other disrtros regarding security updates ? for example comparing to rolling releases distros16:47
TJ-Amalesh: As I said earlier:  If so, then check what it points to with "update-alternatives --display javac"16:47
Amalesh@OerHekks16:48
TJ-leeyaa: No difference where CVEs are concerned16:48
zonettiTJ-, I'll take a look.. first time with usb_modeswitch :)16:48
OerHeksleeyaa, not, ubuntu is with the fastest linux security updaters16:48
mibr001hello i need help fixing a volume control keyboard shortcut16:50
AmaleshTJ I got an error message saying "update-alternatives: error: no alternatives for javac"16:50
TJ-Amalesh: So "openjdk-7-jdk" isn't installed, nor is any other JDK16:51
schoppenhauer*push* hello. I noticed that "sux" is removed from ubuntu. how can I (without having to mess around manually with xauth) su to another user and xauthing it?16:51
AmaleshOk TJ I will try installing it and let u know .Thanks for the help :)16:52
mibr001i know you're busy but will someone ackowledge me?16:53
cfhowlettmibr001, we c u16:54
navetzhey guys what is the best way to keep two folders synced between a windows system and a linux system16:55
navetz?16:55
mibr001thank you fn f12 isnt working for adjusting my volume however when i change the shortcut to another key it works16:55
Kira9204navetz: are you thinkig about a "cloud" or just filesharing? I persobally use Bittorrent Sync between my devices16:57
usr13navetz: I dono. (I assume rsync is not cross-platform.)16:58
simpleshadowquit16:58
navetzKira9204, was thinking filesharing. Is bittorrent sync could based or filesharing ?16:58
usr13navetz: But, why do you need them on both?16:58
JoeLinuxHi, 14.10 here (desktop). Can someone help telephony-service-indicator stop annoying me? How do I get rid of this?16:58
navetzusr13, syncing work folders from my computer and my bosses.16:58
usr13navetz: Oh ok.16:59
Kira9204navetz: btsync is a personal "cloud", it simpky sincs directories between online devices16:59
usr13navetz: But are both these computers on the same network?16:59
usr13navetz: Right?17:00
Kira9204navetz: if you simply wants to transfer files between windows+linux id look into samba/smbd17:00
andreas_I just installed ubuntu 14.10, it is slow, very slow. I have the latest graphics driver (slower before getting the driver), and I have a *very* good computer17:00
andreas_should I rather use ubuntu 14.04 maybe?17:00
Kira9204or sftp or whatever17:00
mibr001fn f12 isnt working for adjusting my volume however when i change the shortcut to another key it works i tried everything google could tell me17:00
navetzusr13, not on the same network, we both work in different locations17:01
LoplinHello. I am having a problem with network-manager. Every time I do a 'sudo restart network-manager' it changes my default gw to something invalid (169.254.0.0).17:01
AmaleshTJ got it thanks!17:01
LoplinAny ideas what might be causing this?17:01
usr13Loplin: Why do you restart it?17:01
navetzKira9204, we are not on the same network. Would like automatic sync between files. bittorrent sync is looking pretty good17:01
Loplinusr13: I was restarting to figure what the heck was changing my gateway all the time.17:02
joe_brfriends, my notebook uses UEFI and I can not boot my usb stick! Have you any ideas why?17:02
Loplinusr13: The gateway changes on my kind of randomly so I have to reset it. I restarted network-manager a few times to see if that was caused it, and it did.17:02
usr13Loplin: Could there be another dhcp server?17:03
daftykinsjoe_br: what did you put on it and how?17:03
usr13Loplin: You could just switch to wicd and see how that works....17:03
joe_brdaftykins, I am trying to install Ubuntu and I used Universal USB Installer, Rufus ...17:04
usr13Loplin: You're on a wireless network?17:04
daftykinsjoe_br: as in you've tried creating it with different programs? ok. what system is this?17:04
Loplinusr13: No, wired. Wireless works fine.17:04
usr13Loplin: So you use both? (Is this a laptop?)17:05
Loplinusr13: It is a laptop. I disable wireless when I have wired though.17:05
joe_brdaftykins, it is windows 8, the default operational system of the machine17:05
daftykinsjoe_br: i meant the make and model17:05
usr13Loplin: I was going to say that if it was connected to only wired network all the time, you don't need network-manager.17:06
joe_brdaftykins, the machine is LG SlidePad 2, and Ubuntu is 14.10 64bits17:06
mibr001thank you fn f12 isnt working for adjusting my volume however when i change the shortcut to another key it works17:06
usr13Loplin: But again, you could just intall wicd and uninstall network-manager and see how that works.17:06
cwarneranyone know if apparmor allows modification of profiles even with sudo?17:07
usr13Loplin: sudo apt-get install wicd && sudo apt-get remove network-manager && reboot17:08
LoplinGoing to restart it again with wireshark up to see if it is coming from a rough dhcp server.17:08
=== matheus is now known as Guest10369
usr13Loplin: Good17:08
daftykinsjoe_br: i don't think that counts as a normal computer capable of running normal desktop ubuntu17:09
joe_brdaftykins, but it has an intel x86_64 processor, an Atom Z374017:09
daftykinsjoe_br: i know, but it looks like a highly custom device17:10
cfhowlettjoe_br, ubuntu-touch perhaps???17:10
joe_brcfhowlett, I could try it, but I would like to at least boot a pendrive with linux17:11
daftykinsjoe_br: i can't even find much about the product from google, let alone any ubuntu info. if it doesn't boot the flash drive in any USB port, i don't think it's going to happen17:12
daftykinsperhaps it's locked down in the setup screen17:12
joe_brdaftykins, I found (on google) a guy who was able to boot gparted live17:13
daftykinsjoe_br: my best suggestion would be to 1) Download and try other ISOs 2) try and access the system BIOS17:15
joe_brdaftykins, I already tryed debian and kubuntu, with no sucess...17:15
daftykinsjoe_br: did you go back to 14.04 ?17:15
joe_brdaftykins, I didn't try it17:16
daftykinsjoe_br: does the drive boot in another computer (an EFI one?)17:16
usr13joe_br: I'm late to the conversation but gparted liveCD / liveUSB have both worked fine for me.  See: http://gparted.org/livecd.php17:16
TJ-joe_br: The SlidePad2 is UEFI, possibly with Secure-boot enabled, and possibly with the UEFI configured to prevent external boot devices17:17
joe_brTJ-, I have tryed to boot with Secure-boot enabled and disabled, both without sucess17:18
daftykinswe're talking about different settings17:18
daftykinsjoe_br: if you can enter your EFI setup, take some pictures for us of each page perhaps17:18
joe_brdaftykins, Sure! Come right back17:19
TJ-joe_br: For an external device to boot - assuming the UEFI has a driver for that device - the boot image needs to have an EFI SP with the boot manager at "/EFI/boot/bootx86.efi"17:19
usr13joe_br:  http://imgur.com/17:20
TJ-joe_br: Check if the UEFI has an option to drop to the UEFI shell17:20
alok_hi17:20
usr13legacy boot?17:20
daftykinsi'm going to bet 10 penguins that even if this device boots, it won't run quite right17:20
alok_currently on Ubuntu 12.04, kernel 3.1317:20
daftykinsit's practically a tablet wannabe17:20
TJ-usr13: probably not if it comes with Windows 8.1 or higher17:20
alok_Lenovo l43017:20
alok_RTL8188CE wif driver17:21
usr13alok_: Don't use Enter for puncuation17:21
=== gilligan is now known as gilligan_
daftykinsalok_: please type on one line and get to the question :)17:21
alok_everytime there is a minor kernel upgrade, the wifi gets haywire17:21
alok_any suggestion?17:22
gilligan_anyone here perhaps running ubuntu on a macbook air 6.2 (2013) ?17:22
usr13*punctuation* (learning to spell)17:22
usr13alok_: How did you install the wifi driver module?17:22
daftykinsgilligan_: best to ask the actual question than hope someone has the exact same setup17:22
alok_stock drivers with kernel17:23
gilligan_daftykins, macbook air isn't exactly rare17:23
usr13alok_: Can you elaborate on "haywire"?17:23
alok_usr13, it doesn't connect the wpa/wpa2 network17:23
usr13alok_: And what do you do to fix it?17:24
daftykinsgilligan_: so what's the question? :)17:24
usr13alok_: (what is required to get it working again?)17:24
alok_usr13,https://github.com/FreedomBen/rtl8188ce-linux-driver/tree/ubuntu-12.0417:24
alok_tried this17:24
=== onrul is now known as Guest65457
gilligan_daftykins, i am trying to get proper cpu frequency scaling and fan under control -- annoyingly all that was running smoothly before but had to reinstall osx/ubuntu the other day17:25
alok_usr13,everytime i need to install again17:26
gilligan_daftykins, right now i just have a constantly noisy fan - also I am using indicator-cpufreq : Before I could choose between different policies and select frequencies. Now all I get is a dropdown with "performance" and "powersafe" which doesnt seem to make a difference17:26
gilligan_daftykins, i have no idea why17:26
usr13alok_: How do you install the wifi driver module?  (What method do you use to install it?)17:27
daftykinsgilligan_: which ubuntu?17:27
gilligan_daftykins, 14.1017:27
daftykinshrmm i wouldn't run non-LTS on a mac17:27
cfhowlettgilligan_, exactly!!! ^^^17:28
usr13alois: Do you run install script from terminal?  ./install.sh ?17:28
joe_brdaftykins, I am finishing the upload, but here's the link: https://www.dropbox.com/sh/oj8mlj2u7gtc6ee/AAC-eUxVIezdz8OdiR0jiuVya?dl=017:29
BlitzHereHi, all. I'm having trouble getting locale to stick on a fresh Ubuntu 14.10 install. I've tried modifying the /etc/default/locale file but I'm having trouble getting values to stick. Can anyone help?17:32
usr13alois: You could block kernel upgrades.17:32
daftykinsjoe_br: how many images will there be total?17:32
joe_brdaftykins, nine... sorry, low upload17:33
daftykinsjoe_br: no problem, i'll keep checking17:33
HackMasHola a todos!17:36
HackMasBuenas tardes17:36
OerHeks!es17:36
ubottuEn la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro.17:36
in_deep_thoughtI am getting a “RandR extension is not present” error when I try and open the displays tool in system settings. However, I have installed aRandR. What else do I need to install?17:38
usr13alois: http://unix.stackexchange.com/questions/63293/blocking-kernel-updates-with-dpkg17:38
daftykinsjoe_br: hrmm how slow? :) i'm still only seeing two17:39
joe_brdaftykins, dropbox says that it needs more 5 minutes to finish all images17:40
joe_brdaftykins, I'll  try to reduce them17:40
daftykinsjoe_br: nah that's fine :) best to see them well17:41
joe_brdaftykins, there are more six images there right now :)17:43
daftykinsjoe_br: the USB HDD looks kinda greyed out on the "boot menu" image - any thoughts there?17:45
joe_brdaftykins, it is beacause there was no USB HDD pluged on. If I plug it, it gets black17:45
daftykinsoh i see17:46
daftykinsjoe_br: are there multiple USB ports? is one USB 2 and one or more USB 3?17:46
joe_brdaftykins, there is one mini usb, one 2.0 'normal' usb and one 3.0 'normal' usb ports17:47
daftykinsjoe_br: no difference with each i take it?17:47
joe_brdaftykins, no. I have made a windows 8 pendrive recovery. It boots from any port...17:48
xocolatlhi all.  I installed xubuntu-desktop and it changed my login screen and all that to xubuntu.  uninstalling the package didn't revert that.  I tried to --reconfigure ubuntu-desktop but that didn't work.  ideas?17:48
joe_brdaftykins, but ubuntu usb sticks boots from any of them17:48
cfhowlettxocolatl, reconfigure plymouth IIRC17:48
xocolatlthe worst part is it's apparently obeying different settings than the ones I'm configuring (like don't lock after 5mins)17:49
daftykinsjoe_br: ok, in that case i would come back to - does your ubuntu device boot in other more normal computers17:49
joe_brdaftykins, I tested my usb stick in my dell notebook, it boots great! :D17:49
xocolatlcfhowlett: thanks for the tip, lemme reboot to see if it works17:50
joe_brdaftykins, The windows 8 installed is 32bits17:53
daftykinsjoe_br: really? hrmm17:53
joe_brdaftykins, maybe the uefi is 32bits and then I need ubuntu 32bits17:53
daftykinswell UEFI by nature is 64-bit, but maybe that device has a dumbed down one yeah17:53
xocolatlcfhowlett: no change :(17:53
daftykinsworth trying17:53
cfhowlettxocolatl,  https://wiki.ubuntu.com/Plymouth17:54
in_deep_thoughthello I am having a problem with a “RandR extension is not present” error when trying to change my display settings. I have purged all propriety drivers and re-installed aRandR, yet still no dice. any suggestions?17:56
joe_brdaftykins, what do you think about chromebooks? I've seen youtube videos of chromebooks with ubuntu18:00
JoeLinuxHey all, telephony service somehow receives my Hangouts chat messages and is popping up notifications for every chat. It's really annoying. Does anyone know how to turn it off or change the settings to remove the association?18:04
joe_brdaftykins, no way. it does not boot even with ubuntu 3218:04
daftykinsjoe_br: my #1 rule with electronics is buy something that is meant to work with something, not something that *might* :)18:05
spin3lloYou need to be more specific, how do you know they're receiving your messages? What do the notifications say?18:05
daftykinschromebooks require modding which isn't ideal at all18:05
ntzhello18:06
ntzcan someone with thinkpad (specifically) check, if you have /proc/acpi/button/lid/LID/state ?18:06
ntzseems like my thinkpad doesn't know the state of the lid, closing/opening lid only triggers lid press button event18:07
dymHey! I have a local DHCP server on my lan and i'd like to trigger some command everytime a certain lease is given to a certain device (in this case when my phone logs into the wlan and requests an IP) - how would i go on about doing that? continuously tail the log file?18:07
k1l_ntz: state:      open. on a x230i 14.1018:07
zykotick9ntz: my x60 does, and it says "state: open" which is true ;)18:07
JoeLinuxspin3llo: When someone sends me a Hangouts chat, it gets repeated in a popup titled "Telephony Service Indicator" with the text of the message directly beneath it, and 3 buttons: "View message", "Cancel" and "OK"18:07
ntzthanks18:07
marco__wajo18:12
LinnakHi, I've just installed Ubuntu 14.04. The first thing was :sudo apt-get update and then I see Ignore http://hu.archive.ubuntu.com trusty/uniiverse Translation-hu_HU18:17
JoeLinuxDoes anyone know how to turn off Telephony Service in 14.10? I can't find anything in Google about doing so.18:17
=== kpease_ is now known as kpease
=== kpease is now known as kpease_
LinnakThis was the third time today when I installed this version and always loose my language after. I removed backports repo because maybe that one is to new to translate to my language but it still Ignores my language18:18
Linnakwhy?18:18
manikantaAre there any good resources which explain about open source licenses?  ....Like MIT , GPL etc..18:22
manikantaI know this not valid question here..but :/18:22
zykotick9manikanta: this might be a good starting point http://www.gnu.org/licenses/license-list.html18:25
manikantathank you :)18:25
NeoGeo64Hello everyone.  Does Ubuntu do volume licensing?18:26
kieron-dellhallo18:26
kieron-dellanyone here18:26
needanyone know where i can go to for help for mysql timezones?18:27
thepheinexhi all18:28
zykotick9need: i remember having an issue when instally mythtv and mysql timezones... i imagine there is a mysql channel?!  see "/msg ubottu alis" for help finding channels18:28
thepheinexneed some help getting ubuntu to boot can someone help18:28
needcheer zykotick18:29
need*cheers18:29
=== mcorpgc is now known as Guest50567
softballsif i would like a e-mail sent each day that gives me information about my ubuntu server (logins, failed logins, cpu/mem usage stuff like that) is there something like that today? or something similar?18:29
andreas_hello! I am trying to stream movies from my Ubuntu-computer to my windows laptop18:30
gentry1hi, I am creating new users and am trying to understand the default groups on the user from a fresh install. if I am creating multiple admin accounts, do they need all those groups?18:30
andreas_any suggestions?18:30
rdenova_-support18:30
OerHeksandreas_, vlc can do that18:30
kieron-dellhallo18:31
andreas_can I view the files in Windows file manager? (Girlfriend is going to be using it to stream TV shows, she knows next to nothing about computers)18:31
Ugb8Hello, I have a small home server for backup/seedbox etc… I wanted to use some kind of web manager like webmin, I read that webmin wasn’t supported anymore, but does something like zentyal could be worth it or does these web administrator things are bull feces ?18:31
EriC^^gentry1: the default groups as of 14.04 are sudo admin lpadmin sambashare18:31
kieron-dellim wanna use linux mint 17 with ubuntu studio repositories18:31
kieron-dellnow mint 17 uses the 14.04 repositories dont they18:32
BlitzHereNeoGeo64: I'm confused. I'm no expert on this but are you looking for paid support?18:32
EriC^^gentry1: dip cdrom plugdev , too18:32
xocolatlI got plymouth back to "normal", but I can't seem to find how to revert the login screen :(18:32
EriC^^gentry1: http://askubuntu.com/questions/219083/default-groups-for-user-in-ubuntu18:33
xocolatlthe lock screen is good, though18:33
bahaxHi, is there a command for setting the wheel emulator on a touchpad?18:33
gentry1EriC^^, I am on 12.04 I see adm cdrom sudo dip plugdev lpadmin sambashare. These are required groups for a user to do what? Sudo and more?18:33
DJoneskieron-dell: No idea, you'll have to ask the Mint support team about that18:33
kieron-dellwell they sadi it should work given the right type e,g trusty18:34
EriC^^gentry1: no, only sudo is required for sudo, ( or adm )18:34
EriC^^gentry1: in the link above there's a description about each group18:34
DJoneskieron-dell: ok, just follow it through wityh them, we don't support Mint here18:35
EriC^^gentry1: adm is in the sudoers file, as well as sudo18:35
kieron-delli know you dont18:35
EriC^^gentry1: so anyone in the adm or sudo group has privileges and can execute any command with privileges18:35
gentry1Thanks EriC^^, I saw that link earlier but missed the explanations on the groups. I appreciate your assistance18:36
kieron-dellbut you support ubuntu studio and other ubuntu stuff18:36
NeoGeo64BlitzHere: I want to pay for my copy of Ubuntu.  Aren't I supposed to?18:36
kieron-dellwhich is why im asking you guys for advice18:36
EriC^^gentry1: no problem18:36
kieron-dellcos im gonna be replacing the repositories to yours18:37
=== need is now known as spleencheese
DJoneskieron-dell: ok, so why ask here, we won't know the answers, you need to ask the Mint people, we don't know how ubuntu Studio will react to the changes that the mint dev's make, they're the only people who can answer you18:37
OerHekskieron-dell, try #ubuntu-studio :-)18:37
spleencheese.18:37
OerHekskieron-dell, but be aware, mint has its own issues18:37
kieron-dellno one is answering atm18:37
BlitzHereNeoGeo64: :P The images are available for free. Both free as in freedom and free as in free beer. You can donate to Ubuntu if you'd like or choose to pay for support18:38
DJoneskieron-dell: You picks your distro, you have to rely on their support18:38
navetzfor bittorrent sync, do you guys use the repository or download it directly?18:38
ben_gI lost an SD card, but I still have a backup image of it. I now have a new SD card and I need to restore the backup to this card.18:38
ben_gDoes anyone know how I can do that?18:38
bubbasauresben_g, How did you back it up?18:39
nimnili had a full system disk. i have removed some stuff, so i have 800M free or something18:39
nimnilstill get error from dpkg -i that it cant even create a folder because full disk18:39
ben_gI backed it up with some command someone here gave me.18:39
OerHeks!find btsync18:39
ben_gdd or something18:39
ubottuPackage/file btsync does not exist in utopic18:39
kieron-dellbut id imagine replacing their repo's with yours is generally the same as they use your ubuntu packages anyway18:40
bubbasauresben_g, Use nicks here.18:40
OerHeksnavetz, i guess you need a ppa for that18:40
ben_gbubbasaures: Ok18:40
ben_gbubbasaures: I think the command was something with dd18:40
kieron-dellthe difference being i wont be using the annoying low latency kernel thats on ubuntu studio18:40
bubbasauresben_g, I don't dd myself, you will have to be sure is all for help. ;)18:40
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
kieron-dellanyway18:41
ubuntuaddicteddoes anyone know what opencl is used for with ffmpeg?18:41
ben_gbubbasaures: Is there any way to check the format of the backup image to see how it was generated and how to restore it?18:42
xocolatlthis is so frustrating :(18:42
kieron-dellubuntu studio 14.0418:42
EriC^^ben_g: open a terminal and type history | grep dd18:42
kieron-dellthats the trusty repositories isnt it18:42
=== Joshua^Dunamis_i is now known as Joshua^Dunamis
=== xdm83_ is now known as xdm83
ben_gEriC^^: http://paste.ubuntu.com/9236826/18:43
sheaphow would I get a terminal to come up and run a command after a user logs in?18:44
EriC^^ben_g: looks like this is it ? sudo dd if=/dev/sdb  of=rpi_sdcard_backup.iso18:44
ben_gI think that was the command indeed18:44
EriC^^is the name of the image rpi_sdcard.. ?18:44
ben_gEriC^^: yes18:44
EriC^^ok, so you dd'd the whole disk18:44
EriC^^type sudo parted -l and get the name of the sdcard18:45
alo21hi all..18:45
EriC^^( /dev/sd.. )18:45
=== kellz is now known as shakthi
xocolatlI can't believe I have to reinstall my entire system because of this bullshit :(18:45
alo21How can I switch back to unity718:46
EriC^^xocolatl: what bs?18:46
ben_gEriC^^: /dev/sdb18:46
kieron-dellhallo18:46
kieron-dellcan anyone answer me18:46
alo21i am running unity 8 now18:46
EriC^^ben_g: ok, so you need to type sudo dd if=/path/to/rpi_sdcard... of=/dev/sdb18:47
kieron-dellare the ubuntu 14.04 repo's "trusty" repositories18:47
xocolatlEriC^^: I installed the xubuntu-desktop package and it changed everything and I can't get rid of it.  there are clearly some settings somewhere that are being obeyed but that I can't change (like "don't like my screen after 5 minutes")18:47
xocolatlEriC^^: I've managed to get plymouth back to normal, but nothing else18:47
compdocUbuntu 14.04.1 LTS (Trusty Tahr)18:47
EriC^^xocolatl: ok, i think it's fixable18:47
OerHeksijust wonder why you cannot find that simple info, kieron-dell18:48
kieron-delldoes that go for ubuntu studio aswell18:48
EriC^^xocolatl: get the list of dependencies apt-cache show xubuntu-desktop18:48
xocolatlEriC^^: I've already purged most of those18:48
EriC^^xocolatl: hold on18:48
EriC^^by hand?18:49
xocolatlit wouldn't do it any other way18:49
kieron-dellim kinda new to switching from one lot of repositories to the other18:49
EriC^^xocolatl: hold on18:49
joe_brdaftykins, I made it! It booted!18:49
kieron-dellim only doing this cos the low latency kernel in ubuntu studio is shit18:49
EriC^^xocolatl: i'll tell you what to do for future reference18:49
xocolatlEriC^^: removing xubuntu-desktop did just that and nothing else, leaving me with a bastardized system :(18:49
xocolatlEriC^^: yes, please do18:49
EriC^^xocolatl: i know i feel your pain18:49
EriC^^:P18:49
EriC^^xocolatl: seriously though i just went through something similar with cairo18:50
EriC^^i decided to install cairo to try it out and when i tried to remove it it broke unity18:50
daftykinsjoe_br: what changed?18:50
kieron-dellanyway18:50
EriC^^xocolatl: usually you can just remove whatever it installed as dependencies, but it had installed stuff that weren't even there in the list so i used !find & ubottu here to get the package names and remove them to get unity back18:51
joe_brdaftykins, the ubuntu 32bits there is no support for UEFI18:51
EriC^^xocolatl: anyways, open a terminal and type apt-cache show xubuntu-desktop18:51
joe_brdaftykins, at least the image downloaded18:51
joneskoo_Hey, does someone know how to get preseed file over https? It complains about not being able to fetch my preseed file from github gist - which does have a good certificate.18:51
daftykinsjoe_br: oh, someone here said you could UEFI with 32-bit. but what made it work then?18:51
joe_brdaftykins, then, I have downloaded gparted and then booted! hahaha18:51
kieron-dellis ubuntu studio 14.04 trusty18:52
kieron-dellaswell18:52
xocolatlEriC^^: done18:52
joneskoo_from debian installer; main-menu[206]: (process:1084): ERROR: cannot verify gist.githubusercontent.com's certificate, issued by '/C=US/O=DigiCert18:52
EriC^^xocolatl: ok open gedit and copy the list of dependencies and paste it there18:52
joe_brdaftykins, sorry! I am too excited!  I have downloaded gparted live, that comes with UEFI support already18:53
daftykinsjoe_br: haha, but that's not an operating system18:53
joe_brdaftykins, then I used Universal USB... to put it on pendrive18:53
xocolatlEriC^^: done (using gvim instead)18:53
joe_brdaftykins, I agree, but I may use it to install ubuntu or any other distro :D18:53
EriC^^xocolatl: ok, use gvim's search and replace to replace the "," with a space18:53
daftykinsinstalling from gparted? i don't follow, it's just a partitioning tool surely?18:53
ilkenI am having a lot of problems with VLC, so I installed mpv, but, can anyone reccomend a decent player for video files?18:54
xocolatlEriC^^: that's why I chose gvim :)18:54
squintykieron-dell:  https://ubuntustudio.org/download/   pretty obvious imho18:54
ilkenMPV works really well but my wife doesnt like it18:54
EriC^^xocolatl: gedit has it too :P18:54
xocolatlnot as nice, though :p18:54
EriC^^haha18:55
joe_brdaftykins, I could install, for example, gentoo. but what I mean: boot from pendrive is possible. I just need to make my own EFI bootmanager, just like someone said18:55
kieron-dellok now how can i download their repositories18:55
DJoneskieron-dell: Please ask in the Mint channel18:55
daftykinsjoe_br: oic18:55
xocolatlEriC^^: so I should just purge all those and then re-install ubuntu-desktop?18:56
DJoneskieron-dell: You're not using Ubuntu or any of the officialy supported variants18:56
EriC^^xocolatl: not by hand18:56
DJoneskieron-dell: If they can't help you, then you need to reconsider which operating system to use18:56
basil1x!it18:56
ubottuVai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)18:56
EriC^^xocolatl: open a terminal and type cat /path/to/savedlist | xargs sudo apt-get purge18:56
kieron-dellbut im asking you lot where to download YOUR repositories18:56
xocolatlEriC^^: isn't that doing it by hand?18:57
kieron-dellisnt that basicly installing your system18:57
EriC^^xocolatl: it will purge them18:57
Loshkiilken: I like mplayer.18:57
DJoneskieron-dell: ok, what does cat /etc/issue tell you18:57
EriC^^xocolatl: by hand i meant purging them one by one manually18:57
xocolatlEriC^^: oh heck no :)18:57
kieron-dellwhich is all i wanna do anyway but this way i dont have to worry about your low latency kernel18:57
DJoneskieron-dell: ok, feel free to use the Mint channel for support18:58
DJoneskieron-dell: But we can't help you here18:58
EriC^^xocolatl: i thought you meant you purged them one by one earlier18:58
xocolatlEriC^^: I was doing them selectively one by one, but now I just want them all gone18:59
kieron-dellso you dont know where to download the repositories for ubuntu studio18:59
EriC^^xocolatl: give it a shot and see if it works18:59
xocolatlEriC^^: qtdeclarative5-qtfeedback-plugin : Depends: libqt5feedback5 but it is not going to be installed19:00
EriC^^xocolatl: report back!19:00
xocolatlI'm not trying to install anything19:01
* xocolatl scratches head19:01
EriC^^xocolatl: ok i think that wont work19:02
EriC^^xocolatl: i just noticed there's network-manager-gnome in the list?19:02
EriC^^xocolatl: well this is pretty nasty19:02
EriC^^of apt-get19:03
xocolatlthat's why I was trying to cherry pick them19:03
xocolatlhttp://pastebin.com/P8qEmVCK19:03
xocolatlEriC^^: I guess I could diff the deps between xubuntu-desktop and ubuntu-desktop, what do you think?19:05
EriC^^yeah that sounds like an idea19:05
xocolatlI'll try that19:05
ben_gEriC^^: the backup restoring is still going, and when I click properties in the explorer, it says that the SD card only contains a few kilobytes of data (the backup contains 4GB of information)19:10
ben_gEriC^^: so is there any way to check if it didn't freeze?19:10
EriC^^xocolatl: how'd you diff/comm them?19:14
joe_brdaftykins, thanks for your help!19:14
joe_brdaftykins, :D19:14
xocolatlEriC^^: vimdiff19:14
daftykinsjoe_br: no problem ^_^ don't feel like we got anywhere though!19:14
xocolatlEriC^^: rebooting, brb19:14
EriC^^xocolatl: you can use sed -i 's/\ /\n/' /path/to/list to get rid of the space and have them on new lines19:14
EriC^^xocolatl: ok, cool19:14
usr13ben_g: You probably just need wait a while longer.19:15
=== chandler_ is now known as Guest69853
ben_gusr13: ok19:15
EriC^^ben_g: yeah you can use kill -USR1 <pid of dd>19:15
usr13ben_g: What size is the SD card?19:16
ben_gEriC^^: wouldn't that stop the process?19:16
ben_gusr13: 8GB19:16
usr13Ok19:16
xocolatlEriC^^: that did it.  I think lightdm-gtk-greeter was the culprit19:16
xocolatlEriC^^: thanks for your help, I was about to blow a gasket.19:17
EriC^^ben_g: no that wouldn't stop it19:17
EriC^^ben_g: type ps aux | grep /dev/sdb19:17
EriC^^ben_g: get the pid, and use that commnad19:17
EriC^^xocolatl: haha19:18
EriC^^xocolatl: cool19:18
fpghost84Hi I created a desktop icon/launcher a fews ago. I can see it on my desktop, and click on it to run my program, but I can't seem to edit it, "ls -la" doesn't show it in ~/Desktop bizarrely, and I can't see anything with the same name in /usr/share/applications.....how can I edit the file with a text editor again?19:18
fpghost84few weeks*19:18
ben_gEriC^^: http://paste.ubuntu.com/9237280/19:18
oao,o19:19
EriC^^ben_g: sudo kill -USR1 331719:20
kdzhows it angingh19:20
oaoa19:22
rawr:B holi19:22
ben_gEriC^^: either that interrupted the restore or it has just finished. Either way, it seems like something failed, because the SD card only contains a single 32kb file19:22
EriC^^ben_g: how big is the .img?19:23
ben_gEriC^^: 7.9GB19:23
EriC^^ben_g: hmm19:24
ben_gEriC^^: or 3.8GB zip-compressed (to give an impression of the size of the actual data inside)19:24
MagicSpudhello I am having this issue: http://ubuntuforums.org/showthread.php?t=2058265 and my /etc/xdg/menus/ folder looks like this: http://paste.ubuntu.com/9237383/ could someone cast some light?19:26
=== someon is now known as someone
EriC^^ben_g: try to dd it again19:27
kdzMagicSpud im way to lazy to open u pthat links19:28
ben_gEriC^^: the exact same command again?19:28
EriC^^ben_g: sudo dd if=/path/to/rs... of=/dev/sdb conv=sync,notrunc,noerror19:28
EriC^^no add the conv part19:28
=== rigor789z is now known as rigor789
=== owner_ is now known as Guest29435
velhohello friends! If I have Ubuntu + Kubuntu + Lubuntu + Cinnamon flavour, will I have incompatibility problems? Or will it run smoothly with no problems? Thanks :D19:42
SuperLagvelho: I could be wrong, but I can't see why it wouldn't work.19:44
MagicSpudthis chat is a crap because nobody helps19:45
gregfranktrying to install webmin error  libnet-ssleay-perl is not installed.19:46
daftykinsMagicSpud: it's volunteer run, you get what you pay for.19:46
daftykins!webmin | gregfrank19:46
ubottugregfrank: webmin is no longer supported in Debian and Ubuntu. It is not compatible with the way that Ubuntu packages handle configuration files, and is likely to cause unexpected issues with your system.19:46
gregfranki installed t on my ubuntu laptop19:46
gregfrankcan't install on my home server19:47
daftykinsgregfrank: but it's unsupported19:47
gregfrankis there ant other like webmin that i can use19:49
daftykinsi can't remember the name, sorry19:50
bish0p_I recently installed xscreensaver, and a lot (90%) of the screensavers say they're uninstalled. How can I fix that? Is this even the place to go?19:50
daftykinsi'm sure a search will come up with answers19:50
OerHeks!info ajenti19:50
ubottuPackage ajenti does not exist in utopic19:50
=== james is now known as Guest76531
gregfrankok thanks19:50
WACOMaltis there any way for me to 1:1 copy an exFAT SD card to a ext4 SD card, maintaining all file metadata like date created etc etc?19:53
gregfrankhow do you do file sharing19:55
ansivirusgregfrank, what kind of file sharing are you referring to?19:55
The_DarkKnightporn19:56
ansiviruslol19:56
ansivirusattention grabber right there ;)19:57
gregfranki have a desktop that has a server just the server and i also have a laptop i want to transfer files and do backup to server19:57
hoverboardare they both running the same OS?19:57
g4vr0chegregfrank: You should use SSH/SFTP for that19:57
g4vr0cheAssuming you're using a Unix on both19:57
zotaszevasztok19:57
ansivirusgregfrank, rsync19:57
OGplayerHey19:58
g4vr0cheIt's a lot harder to set up on Windows.19:58
gregfranki have the ssh installed19:58
daftykinsthen you can scp files around19:58
gregfrankenglish please19:58
gregfranki also have vm on laptop with windows 7 on it19:59
gregfranki have ssh installed and it works19:59
gregfrankwhat is rsync20:01
MonsieurBonHi20:01
MonsieurBonIs it possible to mount the same nfs share in two different locations on the same file system with autofs?20:02
usr13MonsieurBon: Yes20:03
usr13MonsieurBon: Well, I don't know what "autofs" is... but...20:03
MonsieurBonusr13, what might be the problem if autofs only mounts both mountpoints after a "sudo service autofs restart" and not at boot time?20:03
usr13MonsieurBon: WHat I do know is that I can mount a nfs share from multiple clients.20:05
usr13MonsieurBon: So it's mounting two shares?20:06
MonsieurBonusr13, no, it should be mounting the same share on two different mount points on the same client20:06
pressure679Beware terminal users, there's a remote code execution flaw/virus in ubuntu when you use the terminal commando "less" to investigate files.20:07
adamsilverI have the feeling that using debian instead of ubuntu for servers will get me more of the server resources. is this correct or the difference in performance/resource consumption is negligible between ubuntu and debian?20:07
MonsieurBonusr13, eg. in /home/user1/media and in /home/user2/media20:07
usr13MonsieurBon: "the same share on two different mount points"?  Is that really what you mean?20:07
pressure679or not just ubuntu, but linux in general.20:08
blwwwHi. I am using Ubuntu Server 14.04 and have two questions about Apache.20:08
daftykinspressure679: do you have any proof of this? 'virus' is definitely rubbish.20:08
daftykinsblwww: ok?20:08
pressure679daftykins: http://www.pcworld.com/article/2851692/less-means-more-to-malware-authors-targeting-linux-users.html20:09
MonsieurBonusr13, yes, that's why I'm saying in. I want to mount 1.2.3.4:/someshare in /home/user1/media and also in /home/user2/media. I want both users to be able to use the nfs share if they log in. In fact it's working if I restart the autofs service, but not after the boot.20:09
blwww1. In /etc/apache2/sites-avilable there is the file '000-default.conf'. If I have added a vHost there is no reason so keep this file, right? Or is this file important?20:09
daftykinsblwww: typically back that up to your ~ then rename it to your new vhost e.g. domain.com.conf20:10
blwww2. In the same directory there is the file 'default-ssl.conf'. Can someone explain me the sense of the file?20:10
daftykinsblwww: no, but i wouldn't worry about that one :)20:10
daftykinsblwww: these are more tasks for you to consult apache documentation on, if you want to learn to administrate a web server.20:10
daftykinsblwww: bear in mind you will need to add two additional directives to the vhost.conf once you set it20:11
blwwwdaftykins: So I can delete '000-default' if I have configured a vHost. So it is a easy template?20:11
MonsieurBonusr13, I just found this in syslog: automount[5186]: do_umount_autofs_direct: couldn't get ioctl fd for direct mount /home/user1/media20:11
daftykinsblwww: well you will have to a2dissite it first else apache won't be happy. or just delete the symlink'd one in sites-enabled too.20:11
pieroI have 94GB of photos and videos which I want to backup to 20 dvd medias I'm going to store for years. I prefer to store the files one by one instead of creating a 4.7GB tar file. If I can encrypt each file before writting to the disk, better! But I need a script or a program to encrypt and allocate the files to maximum efficiency use of the medias. Somebody can help me?20:12
blwwwdaftykins: Thank you for your help. So you also don't know the sense of 'default-ssl.conf'?20:12
daftykinsblwww: i couldn't explain it and be 100% correct, no. so i must point you to apache docs :) most likely it's the site definition for SSL access20:13
EriC^^piero: why dont you use an ext hdd?20:14
momomoIs there a torrent client that I can use where you can select what files to download from a large pack of files in a torrent? Transmissions seems not to offer this :(20:14
blwwwdaftykins: Thank you. Good bye! :)20:14
pieroEriC^^, I already have the dvds and I'll send the medias to my parents home (to protect my data agaisnt fire, thieves, etc..). I dont want to buy a $100 external disk20:15
EriC^^i think it should be $20 or so20:16
kampiyohello20:16
pieroI already have a backup in my external drive.. but it can burn in the same fire or be taken by a theft in my house20:16
pieroEriC^^, I live in Brasil.. its $100 here20:16
=== kpease_ is now known as kpease
anjo-aladiahiam trying this solution http://askubuntu.com/questions/341979/what-to-do-about-the-disk-drive-for-dev-mapper-cryptswap1-is-not-ready-yet-or ! They say to edit and put a # before line that stars with cryptswap1, but all i have is only this line : " sudo nano -w /etc/crypttabcryptswap1 UUID=ad9d3a7d-bb40-48c5-8e83-edb4e2a74c8b $"  What can i do ?20:17
Kurvivor`hello. How do i get list of packages installed on my system - and dewscription for a package with a given name?20:17
wantihii20:18
bubbasauresKurvivor`, "dpkg --get-selections > ~/my-packages" will drop a text will everything installed in home.20:18
bubbasaureswith*20:18
anjo-aladiahWhy i dont have a line that starts with word, cryptswap1 inside my crypttab file ?20:18
Kurvivor`bubbasaures: thanks!20:19
bubbasauresKurvivor`, You can use that list for re installs as well.20:20
Kurvivor`also, is emacs 25 in packages yet?20:20
daftykinsKurvivor`: apt-cache search emacs20:21
daftykins(after an update)20:21
nedalHi, I have a problem with my webcam. (Actually with Skype) It looks so dark, but when I use the webcam software it a normal picture that I get. I don't get it ..20:21
Kurvivor`thanks again20:21
usr13Mongey: Not sure what to make of it.  (Again, I'm not an autofs user, maybe someone else will have some answers for you.)  (I've always just mounted nfs shares with a simple fstab entry.)20:22
reisionedal: the light emitted by your monitor and reflected upon your face is often contributory20:22
bubbasauresnedal, So you can get a good picture right?20:22
Kurvivor`seems it is not there20:22
usr13MonsieurBon:  Not sure what to make of it.  (Again, I'm not an autofs user, maybe someone else will have some answers for you.)  (I've always just mounted nfs shares with a simple fstab entry.)20:22
EriC^^piero: ok, well aes encryption won't make the size larger20:22
reisionedal: so a large white window from your 'webcam software' might light your face better than skype's UI alone20:23
nedalbubbassaures_ when I use the software it s a good picture but when I use skype it's so dark20:23
bubbasauresnedal, The camera by itself is fine but skype is dark?20:24
nedalreisio I m using windows 7 too (disk partitions) and the picture is very clear on skype in there20:24
nedalbubbassaures_ yes !20:24
=== rigor789|away is now known as rigor789
reisionedal: can you show us a screenshot of each situation? (app working well, & skype working poorly)20:25
usr13reisio: Skype is not an open-source application so I'm not sure we would have any way to troubleshoot or figure out whay it's not operating properly.20:25
EriC^^piero: as for the script i guess you'd have to encrypt and copy a file, check the remaining space and search for a file that fits, and repeat the process20:25
reisiousr13: you think Windows users can't troubleshoot things?...20:25
nedalreisio_ when can I send the screen captures ?20:26
EriC^^piero: you wont get the maximum efficiency, but it'll be ok you'd have to get into optimization algorithms but it's overkill20:26
reisionedal: http://imgur.com/20:26
usr13reisio: Well, I suppose they can, but we are not Windows users.  So how is that relevant?20:26
reisiousr13: I'm not really sure how anything you've brought up is relevant :)20:26
bubbasauresnedal, This a skype from it's website or the ubuntu repos?20:27
usr13reisio: Not sure what you brought up is relevant.20:27
usr13reisio: bubbasaures has asked  you a question....20:29
bubbasauresnot exactly correct20:29
nedalbubbasaures_ I don't know, it was giving with the distribution20:30
reisiobubbasaures: :)20:30
reisionedal: screenshots20:31
bubbasauresnedal, Cool, can you pastebin the out put of grep -vr "^#" /etc/apt/sources.list{,.d/}20:31
usr13bubbasaures: Oh, it is nedal with the Skype issue, not reisio  Sorry...20:31
bubbasauresnedal, Screenshots are a good idea as well, never hurts.20:31
=== noonker is now known as noonk
=== noonk is now known as noonker
crypto_guyon apt-get update: W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/trusty-security/main/binary-amd64/Packages  Hash Sum mismatch20:33
nedalbubbassaures_ well I m choked now because the webcam icon in  skype is not active20:33
usr13crypto_guy: apt-get check -m -f  #Verify the /etc/apt/sources.list20:35
bubbasauresnedal, Try the command I suspect you have the skype websites version, ubuntu suggests their repos, just a guess however if this a fix. That command will show what's in all the sources called lists.20:36
crypto_guyusr13: E: Command line option 'f' [from -f] is not known.20:36
nedalbubbassaures_ I send you a private message20:37
crypto_guyusr13: apt-get check output no errors.20:37
bubbasauresnedal, I have PM Off20:37
nedal/etc/apt/sources.list:20:39
nedal/etc/apt/sources.list:deb http://ma.archive.ubuntu.com/ubuntu/ trusty main restricted20:39
nedal/etc/apt/sources.list:deb-src http://ma.archive.ubuntu.com/ubuntu/ trusty main restricted20:39
nedal/etc/apt/sources.list:20:39
nedal/etc/apt/sources.list:deb http://ma.archive.ubuntu.com/ubuntu/ trusty-updates main restricted20:39
nedal/etc/apt/sources.list:deb-src http://ma.archive.ubuntu.com/ubuntu/ trusty-updates main restricted20:39
unopastenedal you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted20:39
bubbasauresnedal, Note the bots link to http://paste.ubuntu.com20:39
nedalhttp://paste.ubuntu.com/9238239/20:41
kampiyosup20:41
=== MeltedLux is now known as MeltedDed
=== Guest71825 is now known as zsoc
bubbasauresnedal, Appears you have the ubuntu repos version, no skype link in your sources, not sure beyond that without guessing more.20:42
reisionedal: screenshots20:43
=== kpease is now known as kpease_
qwtHello20:48
squintymomomo:  might want to try qbittorrent.  there is also a web/server version of utorrent which may also included that feature. their web site doesn't (afaik) have a release greater than for 13.04 listed though20:48
=== rigor789|away is now known as rigor789
nedalbubbasaures_ I just tried the skype webcam and it worked well :D20:49
nedaldon't know how !20:49
momomosquinty, I will try qbittorent .. i tried vuze .. but very unstable.. crashes pretty fast20:53
usr13crypto_guy I don't know about you but http://archive.ubuntu.com/ubuntu/dists/trusty-security/main/binary-amd64/Packages says: "Not Found"20:53
usr13... for me20:54
bubbasauresnedal, Cool, enjoy even without our help.20:55
nedalthanks bubbasaures20:55
=== MeltedDed is now known as MeltedLux
nedalreisio_ this is the normal: http://imgur.com/T1ecIYa    and this is on skype http://imgur.com/9t1UauP20:57
reisionedal: heh, I meant screenshots... of the screen20:58
reisiothe one I can see is prettier, though :p20:58
nedalreisio ... I though you want see the difference20:59
nedalbut now it works good on skype20:59
reisiookay, well done then :)20:59
nedalthank you reisio_20:59
nedalI was wondering  if any one knows what the total number of the command ls -l refers to ?? I asked this like hundred times but still not get it21:02
bpromptnedal:    "what the total number of the command ls -l refers to"?    myself... dunno what that means21:03
adamsilverwhich version of php will be installed when i do this: sudo apt-get install php5-fpm?21:04
nedalbprompt_ when you type the command ' ls -l' there is a total number printed on screen; what does it refers to ?21:05
squintyadamsilver:  try  apt-cache policy php5-fpm21:06
bprompthmmm21:07
adamsilversquinty: thanks21:07
VrEu_SeNsIbonjour, suis-je au bon endroit pour de l'aide ubuntu en français?21:07
HarryI am trying to install 64 bit ubuntu on my netbook, although it wont boot the installer from USB, I have managed to get 32bit installed and it works fine21:07
squinty!fr > VrEu_SeNsI21:08
ubottuVrEu_SeNsI, please see my private message21:08
HarryI am running a Lenovo S205, it has an AMD E350 processor, and has 4gb of ram21:08
=== rigor789|away is now known as rigor789
bpromptnedal:      try  ->   ls -lh   <--- that should make it evident21:09
bpromptnedal:  "h"uman readable argument21:09
HarryI am trying to install 64 bit ubuntu on my netbook, although it wont boot the installer from USB, I have managed to get 32bit installed and it works fine21:10
HarryI am running a Lenovo S205, it has an AMD E350 processor, and has 4gb of ram21:10
VrEu_SeNsIhow do i enable oidentd so that I can hide my name when I log in?21:11
g4vr0cheHarry: Without more than 4GB of RAM, there isn't a lot of benefit to using 64-bit.21:12
g4vr0cheHarry: What error are you receiving when you try to boot the USB drive?21:12
k1lHarry: g4vr0che if your hardware can use 64bit install 64bit21:13
HarryThankyou g4vr0che, I just want to find out why it wouldnt boot from the 64 bit installer.21:13
VrEu_SeNsITried to read the FAQ section on x-chat without succes. Thanks21:13
k1lHarry: did you md5sum the iso?21:13
HarryNo, I am not sure how to do that.21:13
g4vr0cheDid you get an error message when you tried to boot the USB?21:13
HarryIt was just a black screen, no beeps or anything.21:13
g4vr0chek1l is probably right. It sounds like a sum problem.21:14
g4vr0cheDo you have another computer you can use to check the sum? I can help you out with it.21:14
HarryI am on my desktop at the moment with Window 8, I can boot the netbook into 32bit Xubuntu21:15
g4vr0cheWhere is the .iso stored?21:15
nedalbprompt_ this is what it gives http://imgur.com/0I4G9ne   so can you find the link ?21:15
HarryIts on my desktop, Windows 821:15
k1lHarry: see this: http://forum.ubuntuusers.de/topic/ubuntu-13-10-64-bit-auf-lenovo-s205-installier/ (english version included)21:15
k1lthat seems to be a common issue with your laptop21:16
g4vr0chehttp://sourceforge.net/projects/md5summer/21:16
g4vr0cheProbably want to use something like that. Feed it your .iso, and it will spit out an md521:16
squintyHarry:  if you have the iso on your windows box, then download and install the freebie winMd5sum   it's a bit nicer than the md5sume included with most linux versions21:16
HarryOk, I will try these options, thankyou for helping me this is quite helpful!21:17
g4vr0cheOnce you have the sum, you can check it on this page for 14.10: http://releases.ubuntu.com/utopic/MD5SUMS21:18
g4vr0cheOr this one for 14.04: http://releases.ubuntu.com/trusty/MD5SUMS21:18
HarryThanks, I am using Xubuntu at the moment, I missed the X, was recommended to me as its good on netbooks I am told.21:19
g4vr0cheHarry: Ah, I'll have to look up the links for hta21:19
g4vr0che*that21:19
g4vr0cheHarry: here, https://help.ubuntu.com/community/UbuntuHashes21:20
g4vr0cheMatch your .iso name to the column on the right, then the column on the left has the md5. It needs to match *exactly*21:21
HarryI checked the values, and they are verified as matching in the software!21:21
g4vr0cheWhat was the value you got?21:21
HarryCurrent value : 8b06ac9d76186721312c17a851801e2e21:22
=== Donskoy is now known as skinkitten
HarryThe original valie : 8b06ac9d76186721312c17a851801e2e21:22
g4vr0cheHrm...21:22
g4vr0cheHarry: Did you have a blinking cursor or anything?21:23
HarryThere was nothing! Although I just followed the link you sent me earlier, it mentioned deleting the EFI folder from the USB, and now it is booting into the 64bit installer! :)21:23
squintynedal:  http://stackoverflow.com/questions/7401704/what-is-that-total-in-the-very-first-line-after-ls-l21:24
g4vr0cheAh21:24
HarryThe USB stick is lighting up, it is loading Xubuntu 64bit live version :) The logo is spinning......am now in Xubuntu 64 bit desktop!21:24
=== rigor789|away is now known as rigor789
g4vr0cheThe UEFI must have been trying to boot the disk, but couldn't read the bootloader21:24
g4vr0cheWith that gone, it's now falling back to legacy boot instead.21:25
g4vr0cheGood to know, glad you figured it out! ;-)21:25
HarryYou were very helpful thankyou! I may pop back here every now and again as I am quite new to linux and what not!21:25
g4vr0cheNo worries. I've been here since Edgy.21:27
g4vr0che(not *here* here, but on Ubuntu)21:27
=== rigor789|away is now known as rigor789
nedalsquinty_ Thank you :D21:31
squintynedal:  yw.   :)21:31
=== flare183_freenod is now known as NegativeFlare
=== ZerOlegend-lappy is now known as ZerOSleep
=== ZerOSleep is now known as Zer0Sleep
coraxHi guy.  A quick question --> When viewing emails in Evolution (Ubuntu 14.04) how do I change the default character encoding ?21:35
corax*guys21:36
bpromptcorax:    I don't use evolution......thus  =)21:37
coraxbprompt yeah thats one way to avoid the problem ;-)21:38
bprompteheheh21:38
bynarieanyone in here having problems with any google related service, website? everything from google is loading sllllooooow21:39
kieron-dellhallo again21:39
bpromptcorax:    not trying to avoid it... I just happen to have kmail.. but even then.. I happen to have no use for it thus far... though I have in the past21:39
bpromptbynarie:    not myself21:40
bynariek21:40
bynariethanks21:40
gamax92Praise lord largest channel21:40
bpromptbynarie:     loaded my gmail account in 9secs21:41
coraxbprompt alternatives usually don't have the complete set of functionalty that Evolution (should) have.21:41
kieron-dellcan someone pm me the text in the following file /etc/apt/sources.list.d/official-package-repositories.list21:41
squintybynarie:  try cleaning your web browsers cache, or use bleachbit or similar to see if junk files are slowing your transfers21:42
g4vr0chekieron-dell: I fon't have that file.21:42
g4vr0che*dont21:42
g4vr0chekieron-dell: Are you looking for a stock sources.list?21:43
nedalif I m not the owner/ creator of a directory can i see the contents ? ( excuse my english, It s my 3rd language )21:43
kieron-dellok what files are their21:43
bpromptcorax:    is not a matter of lack of functionality or richness.. I just happen to no need the features as much.... I have used stuff like grouping my mailboxes  and filtering and others in the past.. just not lately21:43
k1lkieron-dell: what ubuntu are you on exactly?21:43
kieron-dellim not ,im on linux mint21:44
k0nichiwawhat is good desktiop for an ec2 micro instance with 1 gig mem21:44
nedalusing a umask = 71121:44
k1lkieron-dell: ok, so please ask the mint guys21:44
squintyhere we go once again..............21:44
k1l!mint | kieron-dell21:44
ubottukieron-dell: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org21:44
YatharthROCKI was trying to install PySoy on Raring, but it complained that libgles2-mesa-dev depended on libegl1-mesa-dev which in turn was not going to be installed because it depended on libegl1-mesa-drivers=10.1.0-4ubuntu5 whereas Ubuntu 14.04.1 came with a newer version of it.21:44
k0nichiwaunbuntu desktop, gnome desktop, kbuntu desktop21:44
k0nichiwaim guessing kubuntu is is minimized ?21:44
kieron-delli know21:44
k1lk0nichiwa: none of them21:44
k1lk0nichiwa: lubuntu one21:45
YatharthROCKSomeone said that I shoudl not need to manually downgrade stuff, so what *should* I do?21:45
k0nichiwai dont think thats avail via tasksel21:45
k0nichiwai guess ill just do ubuntu desktiop21:45
kieron-delli wanna have the ubuntu repositories replace the mint one's21:45
k1lk0nichiwa: do you need a destkop there at all?21:45
TriNiTy_Does the information that we enter into the search windows get saved, and sent to outside corporations?21:45
k1lkieron-dell: dont do that. reinstall a official ubuntu.21:46
k0nichiwak11 no i thought id just try it to see what its like21:46
k0nichiwalubuntu is avail by tasksel21:46
k1lTriNiTy_: you can turn that off in system settings -> privacy settings21:46
YatharthROCKTriNiTy_: Google is your friend. (TL;DR: I think it does get sent to Ubuntu, and god knows what was there in the EULA; but you can disable that from System Preferences.)21:46
k0nichiwais there a way to make a desktiop persist the way a shell does with tmux ?21:46
k0nichiwaso if i lose my connection, when i reconnect its still there in the same state ?21:47
YatharthROCKAnyone know how to solve this EGL stuff?21:47
k1lk0nichiwa: that really sounds awkfull. do you really need that gui? are there no real CLI programs for that jobs?21:48
TriNiTy_really21:48
k0nichiwaas i said i thought id just give it a try i have nothing to lose21:48
TriNiTy_and there isnt anything else in the background that couriers information to other people?21:48
k0nichiwaa micro instance costs 0.013 cents per hour21:48
k0nichiwaif i dont like it ill delete the instance and try again or jsut not use the desktop21:48
k0nichiwaif i install a dkestop i  dont  have to use it21:48
k1lTriNiTy_: what is the issue with: turn it off on privacy settings?21:48
TriNiTy_linux is created under the pretesne that they are an open platform21:49
pbadassbuenas noches21:49
pbadassalgun gestor para badass21:49
TriNiTy_and i dont like the fact that they are actually spying on people when they move under he pretense21:49
k0nichiwaagain is there a way to have an X session persist after you lose our connection ?21:49
k0nichiwamaybe thats the efault behavior21:49
TriNiTy_for them to presume that it is alright is a bad thing in general21:49
k1lTriNiTy_: is there any technical ubuntu issue right now?21:49
Picik0nichiwa: How is X losing its connection?21:49
TriNiTy_yea this is it21:50
TriNiTy_how can i eliminate it from the code?21:50
TriNiTy_I need help with doing that21:50
k1lTriNiTy_: turn it off in privacy settings21:50
k0nichiwapici because im connecting form a coffee shop ?21:50
kieron-delli cant ,when i try and install "UBUNTU STUDIO" .... i end up with the low latency kernels21:50
k0nichiwaim using it remotely which is what X was originally designed to support21:50
TriNiTy_I cant  do that since i turned of the GUI21:50
TriNiTy_how do you do it throught the command prompt?21:50
k1lTriNiTy_: are you kidding me?21:50
TriNiTy_*off21:51
k1lTriNiTy_: aka mendax. stop trolling21:51
TriNiTy_im serious21:51
YatharthROCKI was trying to install PySoy on Raring, but it complained that libgles2-mesa-dev depended on libegl1-mesa-dev which in turn was not going to be installed because it depended on libegl1-mesa-drivers=10.1.0-4ubuntu5 whereas Ubuntu 14.04.1 came with a newer version of it. Someone said that I should not need to manually downgrade stuff just to get EGL, so what *should* I do?21:51
k0nichiwaanyone use tinyproxy + ssh tunneling ?21:51
nedalcould you please answer my question ?21:51
Picik0nichiwa: So you're doing ssh -x ?21:51
PiciYatharthROCK: Are you aware that Raring is no longer supported?21:52
YatharthROCKPici: Ack, a slip of the tongue (finger?).21:52
YatharthROCKPici: I meant 14.04.1.21:52
k0nichiwapixi i dont know am i ?21:53
PiciYatharthROCK: Also, do you mean python-soya or something else?21:53
Picik0nichiwa: I don't know.21:53
k0nichiwaits been a long time since ive used X remotely21:53
YatharthROCKPici: No, I mean PySoy, a fork of the Soya3D project.21:53
k0nichiwai just like the idea of using a desktop as a client thats hosted on a remote server21:53
k0nichiwaseems magical21:53
k0nichiwassh tunneling is kind of magical also21:54
k0nichiwabut i cant get ssh tunneling + tinyproxy to work so far21:54
Picik0nichiwa: Nowadays people just use VNC or similar if they need to connect to a remote desktop running Ubuntu21:54
YatharthROCKTo clarify: I was trying to install PySoy on *Trusty Tahr*, but it complained that libgles2-mesa-dev depended on libegl1-mesa-dev which in turn was not going to be installed because it depended on libegl1-mesa-drivers=10.1.0-4ubuntu5 whereas Ubuntu 14.04.1 came with a newer version of it. Someone said that I should not need to manually downgrade stuff just to get EGL, so what *should* I do?21:54
k0nichiwahm that might work better21:54
k0nichiwadoesnt anyone use tinyproxy ?21:55
k0nichiwacurious to see if anyone has that working because i think i had thing sset up properly yet tinryproxy is supposed to be reliable21:56
k0nichiwaand ssh tunneling was working, i used that to connect to my server as if i were coming from localhost there21:56
Ahmuck!bug21:58
ubottuIf you find a bug in Ubuntu or any of its derivatives, please file a bug using the command « ubuntu-bug <package> » - See https://help.ubuntu.com/community/ReportingBugs for other ways to report bugs.21:58
NuClEaRbLaStthis seem like a good laptop for ubuntu? http://www.microcenter.com/product/438839/Satellite_C55-B5353_156_Laptop_Computer_-_Textured_Resin_in_Jet_Black21:59
PiciYatharthROCK: All of those packages should be at the same version since they come from the same source package.21:59
wadSo I do CTL-ALT-F2 to get to a terminal, and log in. Problem: Font is enormous. How to make it smaller? I'd like to see more than 20 columns of text... :)21:59
k0nichiwaall i really need is a portable LCD screen and use a small desktop with it22:00
k0nichiwalaptops have gotten pretyt cheap so mayb enot much benefit22:01
k0nichiwai want a massively powerful cheap box + portable lcd22:01
YatharthROCKPici: I'm really not sure what I could be messing up. All I did was run the quickstart command on a fresh install22:01
g4vr0chewad: I believe the setting you're looking for lives in /etc/default/console-setup22:01
k0nichiwaif u go that route you can build the box yourself22:01
wadThanks22:01
k0nichiwau cant build a laptop yourself i dont think22:01
k0nichiwaof course if u use linux u can put big compte stuff in the cloud easily these days22:02
=== slyrus_ is now known as slyrus
gamax92you can build a laptop yourself22:03
gamax92laptop boards do sell22:03
nedalkieron-dell_  it s directory, i m asking if  I can list the contents22:03
k0nichiwagamax92, u mean put a 3rd party board into a commerical laptop case22:04
bynariehas anyone been able to use a bluetooth speaker with ubuntu?22:04
bynariei keep getting errros22:04
gamax92k0nichiwa: how's that different than putting a 3rd party tower board into a commercial tower case22:05
squintygood topic for ubuntu-offtopic    this channel is for ubuntu support22:05
eblipgreat topic for #hardware those guys really know their stuff in there .they will set you straight22:06
chris_All black screen after suspend (Ubuntu 14.04 LTS on Asus laptop model A53Z). Hoping this is a known problem??22:07
=== varun_ is now known as Guest72793
k1lchris_: see the bugs on launchpad if this is known22:07
ebliphave you tried pressing your pc on off button just lightly chris_22:07
chris_yes. did not work22:08
eblipyes it only works sometiems if i get that bug22:08
chris_bugs on launchpad?22:09
williamtdrupgraded from 12.04 -> 14.04. network config broken. Boot log here (http://i.imgur.com/HtoyiO2.png), any ideas? Thanks.22:11
squintychris_:  https://bugs.launchpad.net/ubuntu22:11
nedalWhat s the difference between changing the value of the umask in /etc/profile and .bash_profil22:12
=== MeltedDed is now known as MeltedLux
perrolijowho22:13
nedal...22:14
daftykinswilliamtdr: can you ping a local IP?22:15
daftykinsassuming static allocation / having even received an address22:16
davidfetter_fbnhello22:19
daftykinshi22:19
davidfetter_fbni'm talking to the wrong version of PostgreSQL by default. both 9.1 and 9.3 are installed, and psql defaults to 9.1. how do i change that default?22:19
daftykinsupdate-alternatives ?22:19
davidfetter_fbnah22:20
davidfetter_fbnhrm. none of the obvious invocations of that are working22:21
daftykinshow-so? can't say i've used it to comment i'm afraid22:21
daftykinsjust know of it22:21
davidfetter_fbnthere are like 100 commands for the package22:22
bynariehey daftykins, do you have any experience in using bluetooth speaker in ubuntu?22:22
davidfetter_fbni don't think i need to do each one22:22
daftykinsbynarie: no, sorry.22:22
bynariethats ok22:22
bynariei keep trying to stream music to it and it wont connect.. seems to be a common issue with ubuntu22:23
chris_ All black screen after suspend (Ubuntu 14.04 LTS on Asus laptop model A53Z). Just checked bugs on launchpad. others have reported this problem with Asus laptops but no solution posted as far as I can see.22:23
bynariechris_, i have msi laptop... same issue22:24
MKCoinI lost sound on my Ubuntu 12.04. How can I restart my sound driver without rebooting?22:24
chris_So no known fix?  Sounds like drivers maybe...22:24
bynarienot sure22:25
bynariei havent really looked into it22:25
bynariechris_,22:25
chris_bynarie, so you just don't use suspend?  Just not sure how much unnecessary power is being used. hate to shut it off every time.22:26
bynarieyea i dont use suspend chris_22:27
bynariebecause the screen just says black22:27
bynariewhat version are you using chris_ ?22:27
chris_14.04 LTS22:27
bynarieoh ok22:27
bynarieim on 14.1022:27
bynariewierd22:28
chris_ok... thanks anyway, thought I'd check here!  later22:28
=== MeltedLux is now known as MeltedDed
schultzaDoes Ubuntu allow the moving of min/max/close in unity with 14.10, yet?22:29
daftykinsit used to handle it via changing theme, no idea what the deal is these days22:29
LazuratusHi, my smb share stops working after a while (seems random) using autofs (windows 7 > ubuntu 14.04) where can I find the log file? (or if there isn't one by default, any way I can enable logging?)22:29
daftykinsi believe they're 'window controls'22:29
k1lschultza: i dont think that will happen any time in unity7 again22:29
=== wincyjmnieja is now known as mniejbasi
schultzaGuess I'll stick with LM/LMDE/or any apt-sid distros.22:30
k1lschultza: you can run other desktops than unity on ubuntu.22:31
schultzayes, but id have to uninstall unity.. it doesnt like to be put together with other desktops...22:31
k1lthat is not true at all22:31
amir_how to fine linux kernel version?22:31
=== amir_ is now known as Guest68131
schultzaeven in 14.04, i've had issues between them22:31
frodopwnscan i make the terminal in ubuntu change tab font when the terminal windows has updated content?22:32
schultzaI just dont know how to describe those issues.22:32
bubbasauresschultza, unity is a plugin in compiz, very tiny and sits on  gnome 3.22:32
k1lGuest68131: uname -a22:32
k1lschultza: if you need an excuse not to use ubuntu, well. just use other stuff22:32
kobaltwhen i install it, when it boots it gave a log error that the system couldn't read the partition, and sometimes in other installations trys when copying the files to the harddrive it shows a error message that says that the hardrive might be to old, and i could bought a new one. All those errors didn't show up in the first 3 or 4 times that i've installed the ubuntu, b22:33
kobalt<kobalt> ecause before the errors i had a pirate windows 7 edition, and i always got some problems on it and had to format my computer. Sorry for my bad english22:33
kobalthello22:33
bynarieyay!!!! i got bluetooth working... i was just missing a package... go figure22:33
schultzaThat's not what I'm after. I really like Unity, just I hate that they are limiting my customization options... that's all.22:33
k1lschultza: its hardcoded now and its a wontfix for unity7 since unity8 is in the makings already22:36
squintyLazuratus:  ls /var/log/samba22:36
schultzaWhen do they plan on releasing Unity8?22:36
JavaJoshTrying to install Ubuntu on a friends Toshiba Satellite with Win8 on it. I want to completely remove windows and replace it with ubuntu. During setup, I get an error "/casper/vmlinuz.efi: reader error @ 6403032"   The md5 hash is good to go on the ISO I used. Please, please help! I've checked all over for an answer to this!22:36
bubbasaures!smart | kobalt22:36
ubottukobalt: smart is Self-Monitoring, Analysis and Reporting Technology, a monitoring system for hard drives. See https://help.ubuntu.com/community/Smartmontools22:36
k1lschultza: somewhere until 16.0422:37
daftykinsJavaJosh: DVD or USB flash drive? it's bad, recreate it22:37
JavaJoshdaftykins: USB22:38
schultzaAh, that's why LM did what they did.22:38
daftykinsJavaJosh: yep remake it22:38
JavaJoshdaftykins: I've recreated this USB drive twice now22:38
daftykinsJavaJosh: from what OS? via what method?22:38
JavaJoshdaftykins: alright, I'll try a third. I've done it on my ubuntu machine, first with ubuntu startup disk creator, and another with UNetbootin22:38
daftykinsJavaJosh: nuke the disk with a FAT format, then 'dd' the ISO on via "sudo dd if=/path/to/ISO of=/dev/sdX bs=2M" where sdX is the device name of your flash drive, don't select "sdb1" though - it has to be "sdb" for example22:39
g4vr0cheJavaJosh: You might try just using dd to write the image directly to the drive. Assuming the md5 matches, that will work best22:39
daftykinsi'll be back in a few minutes22:39
daftykinsg4vr0che: ^5 on that one ;)22:40
g4vr0chedaftykins: That always happens22:40
AlexPortableAny way how I can integrate grooveshark or similar into ubuntu?22:41
JavaJoshdaftykins: working it, thanks22:42
k1lAlexPortable: no. grooveshark is driven by ads so they dont let you just stream the music22:42
JavaJoshg4vr0che: giving it a shot22:42
AlexPortablek1l: any other service that can do it?22:43
k1lAlexPortable: some music players can run some plugins for services.22:43
k1lyou are just to vague. see rhythmbox and search for their addon list22:44
=== rigor789 is now known as rigor789|away
Lazuratussquinty: thx, not sure it's what I need tho... file is only 745 bytes (log.smbd, right?) (content: http://pastebin.com/iHsPC8HG )22:45
mbffHello! How can I do an if statement to test if an exfat drive is mounted?22:45
=== rigor789|away is now known as rigor789
JavaJoshdaftykins: I got past that... Now I'm getting 'drm_kms_helper: panic occurred, switching back to text console22:47
mbffI have tried several posts on stackoverflow, but I think I may need to find another way since it is an exfat mount22:47
daftykinsJavaJosh: past it from doing...?22:47
JavaJoshdaftykins: I'm past the error of '/casper/vmlinux.efi: reader error' I followed your directions, dd'd the USB drive22:48
=== Joshua^Dunamis is now known as Joshua^Dunamis_i
AlexPortablek1l: well basically i have indicator-synapse setup, and someone tells me: 'hey listen to song x' i want to be able to type it in and it will start playing22:49
daftykinsJavaJosh: ah ok. is this system known good?22:49
JavaJoshdaftykins: could you rephrase that? i don't understand? it is a working computer, worked fine with windows 822:49
=== rigor789 is now known as rigor789|away
master_baiterhi guys i have  a problem with my wifi drivers22:49
JavaJoshdaftykins: im trying this out http://askubuntu.com/questions/471012/ubuntu-14-04-lts-fails-to-start-with-a-kernel-panic22:49
master_baiterit keeps disconnecting ever so often22:50
k1lAlexPortable: so go on the hunt for a service you like and if there is a plugin for it in rhythmbox22:50
daftykinsJavaJosh: that's for an install, not a live session22:51
JavaJoshdaftykins: aye dios mios, it is one thing after another trying to get ubuntu on this laptop22:51
AlexPortablek1l: will do. Thanks22:54
daftykinsJavaJosh: Windows 8 is still in one piece and bootable i take it?22:54
JavaJoshdaftykins: nope, not as of just now! now I cannot even get into windows 8. I had to hold shift when shutting down windows 8 to tell it to reboot to the flash drive, now when i reboot, even when trying to boot from the Win HDD, it is pretending that the HDD is not bootable.22:55
JavaJoshdaftykins: integrating windows 8 with the hardware with this secure boot crap was an awful experiment.22:56
JavaJoshdaftykins: i can't even get to the GRUB now to add parameters22:56
Ahmuckcheck ur bios22:56
JavaJoshAhmuck: me?22:57
squintyLazuratus:  https://www.samba.org/samba/docs/using_samba/ch06.html#samba2-CHP-6-TABLE-2    " Logging Configuration Options"  maybe of some use.  :)22:57
daftykinsJavaJosh: no, the laptop you're on is just wonky. not had any issues with it where i've dealt with EFI systems22:57
JavaJoshdaftykins: my lord, after 10 reboots, now i am at the ubuntu screen to install...lets try this out22:58
Ahmuckyes.  an option u could use is dban22:58
Ahmuckdban will get u a clean drive22:58
daftykinsJavaJosh: i would not waste my time. memtest that thing22:58
Ahmuckwithout having to worry about backdoored software on the drive22:58
JavaJoshAhmuck: im googling dban22:58
JavaJoshrunning memory test22:59
Ben64dban isn't necessary at all. could just set bios to boot to legacy or whatever, and use ubuntu to wipe the disk22:59
JavaJoshBen64: when booting legacy in the BIOS i can't even see my ubuntu flash drive22:59
JavaJoshUEFI is the only way to see it *scratches head*23:00
Ben64hmm...23:00
Ben64can you turn off secureboot23:00
JavaJoshdone23:00
JavaJoshit's been off23:00
Ben64well thats good23:00
JavaJoshi couldn't get to the flash drive with it on23:00
JavaJosh"OS IS NOT SECURE DERP" I'm like wtf is this. damn it windows..23:00
JavaJoshmemtest is running now23:01
Ahmucklet me put it this way.  backuping up my new computer, then getting ready to use dban i got a call "Why are you changing things" in relation to the computer.23:01
=== cyphase_ is now known as Guest65152
daftykinsAhmuck: i don't believe you23:02
JavaJoshAhmuck: got a call? what?23:02
daftykinsunless it was a work machine :P23:02
Ben64sounds like tinfoil hatish fud23:02
JavaJoshAhmuck: call from whom?23:03
Lazuratussquinty: thank you, I'll bookmark the page in case the share breaks again... I followed the "Windows 7 connectivity problems" section on https://wiki.archlinux.org/index.php/Samba/Troubleshooting and the share works again (for now)23:03
linuxatoris ubuntu rolling release?23:04
Ben64no23:04
squintyLazuratus:  yw.   good to hear you are back up and running. ;)23:04
master_baiter_how do i install the right drivers for my wifi card?23:05
Ahmuckhttp://en.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface - read this23:05
AhmuckJavaJosh:23:05
JavaJoshAhmuck: k23:05
AhmuckJavaJosh: heh, we don't know23:05
* Ahmuck reading up on UEFI23:05
master_baiter_guys, i am having trouble with my ubuntu system23:05
Ben64master_baiter_: you should change your name23:06
master_baiter_Ben64: why?23:06
Ben64doesn't sound appropriate for this channel23:06
linuxatorhow come that Debian is rolling release while ubuntu is not ?23:06
master_baiter_really? i guess nobody here likes fishing23:07
k1llinuxator: debian is not23:07
=== mniejbasi is now known as kombaktu1404
k1llinuxator: please make sure you know what rolling release is. arch is a rolling release for example23:07
AhmuckIn 2011, Microsoft announced that computers certified to run its Windows 8 operating system had to ship with secure boot enabled using a Microsoft private key. Following the announcement, the company was accused by critics and free software/open source advocates (including the Free Software Foundation) of trying to use the secure boot functionality of UEFI to hinder or outright prevent the...23:08
Ahmuck...installation of alternative operating systems such as Linux. JavaJosh23:08
daftykinsAhmuck: that's ancient news that was completely turned about face, history lessons don't seem particularly useful here either23:09
daftykinswe deal in the here and now23:09
JavaJoshAhmuck: I knew this when  it happened. I don't like it23:10
tgm4883What software could I use to turn a USB camera into a network camera?23:10
AhmuckJavaJosh: new computer or older one?23:10
JavaJoshAhmuck: this is new enough to have windows 8 on it23:10
JavaJoshAhmuck: i'm not sure when he got it23:10
linuxatork1l, ok,thanx.but as far as i remember i never had to reinstall Debian23:10
Ahmuck*shrugs*, i'd dban the drive23:11
k1llinuxator: you dont have to reinstall ubuntu, too23:11
k1llinuxator: i think you dont know what the point of rolling release is.23:11
MKCoinI lost sound on my Ubuntu 12.04. How can I restart my sound driver without rebooting? I restarted pulseaudio but it has not restored sound.23:11
linuxatork1l, good news23:12
k1llinuxator: so is there a technical issue behind that questions?23:13
linuxatork1l, no,thanx.just asking23:14
k0nichiwatransmission-daemon has its rpc whitlest set to allow only 127.0.0.123:15
linuxatork1l, i was comsidering installinh lts ubuntu23:16
k0nichiwai did an ssh tunnel from my local port 2000 to its port which is 9091 on the remote machine23:16
k0nichiwaits telling me my ip address is not alowed, any ideas ?23:16
k1llinuxator: if you dont want to upgrade all 6 months that is a good choice23:16
k0nichiwai tested the ssh tunnel by doing the same thing to remote port 80 from local port 2001 and it worke dfine23:16
k0nichiwavery confused23:16
AhmuckJavaJosh: on my computer i used gparted to view the partitions.  there were four partitions as primary.  old school only allowed 4 primarys.  i rebooted to windows, used the backup software option so i could re-construct the drive when i deceded to sell it 3 years from now, rebooted, dbaned (it took several hours) and then rebooted and intstalled23:16
k0nichiwai shoudl appear to be comeing from 127.0.0.1 when i do localhost:2000 shoudlnt i ???23:17
squintyMKCoin:  http://askubuntu.com/questions/230888/is-there-another-way-to-restart-the-sound-system-if-pulseaudio-alsa-dont-work23:17
k0nichiwasuddenly nobody is willing to talk about ssh tunneling relate dissues , people were very helpful a few days back23:19
k0nichiwaim not trying to do somthing hackerish here23:19
MKCoinsquinty I'll try it a few times and see if it works. It stopped working after a suspend, as someone in the comments there stated23:20
MKCoinhm, squinty I am getting this as part of the alsa restart: "(failed: modules still loaded: snd-hda-codec-hdmi snd-hda-codec-realtek snd-hda-intel snd-hda-codec snd-hwdep snd-pcm snd-timer snd-page-alloc)"23:22
pltmformat a: mformat: Can't open /dev/fd0: No such file or directory23:27
=== kpease_ is now known as kpease
squintyplt: http://askubuntu.com/questions/339115/format-usb-drive-using-mformat23:28
Gunn_undefiner reference to TCanvas23:30
squintyMKCoin:  quick googling for some of that error message ("failed: modules still loaded: snd-hda-codec-hdmi")  returns quite a few hits23:30
Gunn_need help with ubuntu's smart linking issue23:30
Gunn_ANYONE ?23:31
jorge_hi23:31
=== kpease is now known as kpease_
jorge_buenas noches23:32
MKCoinOk, I fixed it. For reference squinty or anyone else, I found the solution here, involving the script shown here: https://help.ubuntu.com/community/SoundTroubleshooting#Getting_ALSA_to_work_after_suspend_.2BAC8_hibernate23:33
squintyMKCoin:  thanks for the update...good to hear you got it fixed :)23:35
pltThe trs-80 color computer copy utilities and the emulator requires it to be named fd023:36
theslow1Hello everyone, I have a Lenovo Thinkpad W54023:38
theslow1I cannot get my external monitor to work for me23:39
darknessthekiddHey, can someone give me their opinion of Xubuntu vs. Ubuntu? Essentially Xfce vs Unity DE's23:39
Ben64darknessthekidd: try them both out and make your own opinion23:39
k1ldarknessthekidd: both work. so best is to try them and see if they work for you, too23:39
theslow1darknessthekidd, I prefer xfce23:40
darknessthekiddI have used both, I don't know which one I like. xD23:40
theslow1but what I like the most is gnome-shell23:40
k1ldarknessthekidd: we cant help you on that one :)23:40
jorge_hi23:40
geniidarknessthekidd: Perhaps try others as well to get a better comparison. Like Lubuntu and Kubuntu23:40
darknessthekiddI've used both of those also.23:40
darknessthekiddI have tired a lot of different distro's.23:40
theslow1I have an optimus video card23:41
theslow1could I blacklist both nouveau and nvidia23:41
theslow1to get ubuntu to use the intel drive?23:41
k1ltheslow1: use nvidia-prime for optimus cards23:41
darknessthekiddLinux Mint, Ubuntu, Ubuntu Studio, Xubuntu, Kubuntu, Lubuntu.23:41
darknessthekiddI have used more than those. But those are ones that come to mind.23:42
k1ltheslow1: if its set up right you dont need to blacklist something23:42
k1ldarknessthekidd: since this is not a technical issue you could ask in #ubuntu-offtopic for the opinions of the people there :)23:42
theslow1k1l, everything works fine, except for my external monitor. (which only works when I set primary display as VGA in bios) but then my built in display does not work23:43
darknessthekiddMy PC only has an intel intergrated graphics, never used anything other than an intergrated so I couldn't help with this one theslow123:43
darknessthekiddOkay, will do. Sorry about the bother.23:43
theslow1yea optimus is a huge pita23:44
k1ltheslow1: so you run nvidia-prime?23:45
theslow1k1l, so far I am seeing "command not found" when I run nvidia-prime23:48
k1lhttps://wiki.ubuntu.com/X/Config/HybridGraphics23:49
theslow1but it is installed: https://dpaste.de/NUZV23:49
rodney77Hello, let's say I want to play music with one program (say, Nightingale), and a podcast with another program (say, vLC)23:50
theslow1damn, lightdm is requirement?23:50
rodney77is there any way in ubuntu to pan the audio from one source left and the other one right?23:50
theslow1thanks k1l I'll try it23:50
theslow1rodney77, you want to play "song1" from "speaker1" and "song2" from "speaker2" at the same time?23:53
theslow1rodney77, I am not sure if this can be done,23:54
flashramhi, how do unpack libgmp.tar.lz on ubuntu feisty ... thers no solution at hand is there ? wank o_0 wank23:54
rodney77thanks for the reply, theslow1. Sort of. If I could control the panning so one would be slight left and one slight right, that would be even better.23:54
flashramnobody ? unpack libgmp on ubuntu feisty howto ?23:55
flashramwhy isnt 7z on ubuntu ?23:55
theslow1flashram, I think it is23:56
squintyrodney77:  might want to try asking in #ubuntu-studio   https://ubuntustudio.org/tour/audio/23:56
theslow1flashram, p7zip-full23:56
flashramjust installing p7zip-full thkx :)23:56
k1lflashram: ubuntu feisty? really?23:56
flashramso is it an x app ? or a terminal app ?23:56
kobaltNasa use Ubuntu, is that true?23:57
flashramthe plan is to only run xterm in xming via qemu23:57
theslow1full is both23:57
flashramso whats the cmd line for lz ?23:57
squintyflashram:  you know that version is horribly eol, out of date, dead, no longer viable etc  :P23:57
flashramand no trojans :p23:58
theslow1flashram, you have tried "tar -xvf filename"23:58
k1lflashram: it got security issues that a 14 year old learns to use in school23:58
k1lflashram: so please use a ubuntu that is actually supported23:58
flashramp7zip creates instead of unpacking o_023:58
rodney77ok, thanks squinty23:59
flashrami dont support ubuntu ... they never support me running old repos23:59
flashrami like it tho23:59

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!