[00:00] <EriC^^> wilmer_: try to check what version libc6 is
[00:00] <Bashing-om> EriC^^: is there an " /etc/X11/xorg.conf  " that is controlling the mouse and keyboard ?
[00:00] <wilmer_> EriC^^, Yepp it stoped working when I first was able to log in after kernel was reinstalled. I'm on a live session from a usb-stick on the same machine so I don't think its a BIOS thing
[00:01] <wilmer_> EriC^^, didnt make a copy of sources.list :-(
[00:01] <Bashing-om> EriC^^: wilmer_ :: If we are certain we are up on 14.04 .. might try and install an old lernel of the 14.04 series and see what then results ?
[00:01] <wilmer_> EriC^^, or.. should it be a sources.list.d in that folder?
[00:02] <Bashing-om> lernel/kernel*
[00:02] <EriC^^> wilmer_: no problem http://pastebin.ubuntu.com/9573805/
[00:03] <EriC^^> wilmer_: type apt-cache policy libc6 | grep Installed
[00:03] <wilmer_> EriC^^, Can I copy/paste that pastebin in the sources.list?
[00:04] <EriC^^> wilmer_: yes
[00:04] <wilmer_> Installed: 2.19-0ubuntu6.4
[00:04] <EriC^^> i have that too
[00:06] <Bashing-om> EriC^^: wilmer_ Sure looks 14.04 to me ! think up another package that is unique to 14.04 . See what is .
[00:07] <wilmer_> EriC^^, sources.list is back on the old one again
[00:07] <EriC^^> wilmer_: ok
[00:08] <EriC^^> wilmer_: you could try to apt-get update
[00:08] <EriC^^> then apt-get dist-upgrade
[00:09] <EriC^^> if it's all already there it might just upgrade stuff
[00:09] <EriC^^> if it's not and it breaks you can try to do-release-upgrade to 14.10 maybe
[00:10] <wilmer_> EriC^^, hmm... still gets error on apt-get update..
[00:10] <EriC^^> what's the error?
[00:10] <wilmer_> EriC^^, did my changes not get threw in sources.list maby
[00:10] <teward> wilmer_: what's the error say
[00:10] <wilmer_> http://pastebin.ubuntu.com/9574666/
[00:11] <teward> ooo that looks like DNS.
[00:11] <EriC^^> wilmer_: also do as Bashing-om suggested and install an earlier kernel, 3.13.0-40-generic
[00:11]  * teward leaves it to EriC^^ and others though, as they're already helping :)
[00:11] <wilmer_> http://pastebin.ubuntu.com/9574679/
[00:12] <wilmer_> EriC^^, should i do a do-release-upgrade instead?
[00:13] <EriC^^> wilmer_: i think you have to copy the /etc/resolv.conf from the live session to the chroot
[00:13] <EriC^^> Bashing-om: teward ?
[00:14] <EriC^^> what do you think?
[00:14] <bekks> EriC^^: It's a DNS issue, yes.
[00:14] <wilmer_> tried to do a do-release-upgrade but no new release found :-(
[00:15] <bekks> wilmer_: There is no newer LTS release than 14.04, which you are on, apparently.
[00:15] <Bashing-om> EriC^^: Think'n as earlier there were screams and hoolers about "host", -> cat /etc/hosts , cat /etc/hostname . Make sure they agree .
[00:16] <EriC^^> wilmer_: ok, type head -n 2 /etc/hosts /etc/hostname
[00:16] <wilmer_> Bashing-om, EriC^^ http://pastebin.ubuntu.com/9574721/
[00:18] <Androgard> Can anyone tell me what I am looking for? I'm hosting a small webshop (Shopware). I need a mail-"something", which just forwards e.g. info@myshop.com to my Gmail account. The webshop should be able to send mails, when user register or order stuff. I thought I need a mail-server and tried to install postfix and dovecot, but it seems to require a great amount of knowledge (abuse/spam protection), because it can do too much (at least for my use case). Can
[00:19] <Androgard> (Since it just forwards mails to one gmail account, I don't need the mails being stored on the server... I think)
[00:19] <wilmer_> EriC^^, If it is an option, I don't mind upgrading to 14.10. If it solves the problem and give me a working computor with mouse, network and all my files and configs  I'm shure I can figure the rest out
[00:19] <EriC^^> wilmer_: ok, type exit and then cp /etc/resolv.conf /mnt/etc/resolv.conf
[00:20] <wilmer_> EriC^^, done
[00:20] <EriC^^> wilmer_: sudo chroot /mnt
[00:20] <EriC^^> wilmer_: apt-get update
[00:20] <Bashing-om> wilmer_: EriC^^ Not to say I understand all I se in the host files, but the names do agree. What results -> ping -c3 8.8.8.8 ( maybe networking not enabled in the CHange Root ? ) .
[00:21] <wilmer_> EriC^^, yepp! That worked!
[00:21] <EriC^^> wilmer_: ok try do-release-upgrade for the heck of it
[00:22] <wilmer_> EriC^^, No new release found
[00:22] <bekks> wilmer_: Because there is no newer release than you are on already.
[00:23] <EriC^^> if he removes lts from Prompt= it'll offer 14.10 right?
[00:23] <bekks> I'd suggest running apt-get update; apt-get dist-upgrade; instead.
[00:23] <EriC^^> wilmer_: do you want to try an earlier kernel like Bashing-om suggested first?
[00:23] <EriC^^> bekks: ok
[00:23] <EriC^^> i just have a bad feeling about it
[00:23] <EriC^^> but give it a shot i guess
[00:23] <wilmer_> EriC^^, lets upgrade... Its late, im hungry! :-)
[00:23] <bekks> do-release-upgrade is even worse.
[00:24] <Bashing-om> EriC^^: wilmer_ :: As this is a server, and 14.10 only lives for 9 months, is not 14.10 a means of last resort ?
[00:24] <EriC^^> bekks: i was hoping somehow if 14.04 wasn't fully installed it might somehow offer to upgrade to 14.04 ( using saucy in the sources.list )
[00:26] <wilmer_> EriC^^, clever! But this server will not last nine months without some rebooting any way. So a upgrade to 15.04 when time comes doesn't mather
[00:26] <bekks> wilmer_: Being on 14.04, you have to upgrade to 14.10 first.
[00:27] <wilmer_> EriC^^, so, what do you think? Kernel or upgrade ;-)
[00:27] <bekks> wilmer_: apt-get update; apt-get dist-upgrade;
[00:28] <mrjiang> holle
[00:28] <Bashing-om> wilmer_: ^^ and post the outputs to pastebin .
[00:28] <wilmer_> Bashing-om, will do
[00:29] <Bashing-om> wilmer_: can not hurt, and might do a world of good .
[00:30] <wilmer_> Bashing-om, EriC^^, bekks http://pastebin.ubuntu.com/9574844/
[00:31] <linuxmint> Hello, is someone able to work out why Linux plays no sound via HDMI, but when changing the HDMI port on TV from port 1 to 2, then back to port 1, HDMI sound works?
[00:31] <bekks> wilmer_: I'd suggest exiting the chroot and trying to reboot into your system now.
[00:32] <wilmer_> bekks, EriC^^ Bashing-om oki.. To quote a great man/machine... Ill be back!
[00:32] <EriC^^> wilmer_: yeah^^
[00:33] <_zeus_> ciao
[00:33] <EriC^^> !it | _zeus_
[00:35] <Bashing-om> EriC^^: " E: Can not write log (Is /dev/pts mounted?) - openpty (2: No such file or directory) " from that last .. do we need to redo the CHange Root ?
[00:35] <EriC^^> linuxmint: i usually have to press on settings > sound select the HDMI one to get it to work ( and click on it again when you unplug it )
[00:37] <EriC^^> Bashing-om: i've no idea i hope it wasn't logging to some file from the pts or something
[00:37] <EriC^^> Bashing-om: i think it went through
[00:37] <EriC^^> it was all installed error free, minus not finding X running and such
[00:38] <Bashing-om> EriC^^: Yes, it does look good . Do some clean up ? take a chance and autoremove ?
[00:39] <EriC^^> Bashing-om: yeah
[00:39] <pistdov> https://torrentfreak.com/bittorrent-anonymous-and-impossible-to-shut-down-141218/  researchers make BitTorrent anonymous, and impossible to be shutdown.
[00:40] <wilmer_> EriC^^, Bashing-om bekks, Nope.. No network and no mouse support.. And on the loginscreen it says ubuntu 14.04 LTS
[00:40] <Bashing-om> EriC^^: That too is what I think, we await the OP's return . You do have my interest here for sure, just do not know how much help I can be ( LVM !) .
[00:40] <OerHeks> pistdov, how is that related to ubuntu support ?
[00:41] <Bashing-om> wilmer_: EriC^^ ^^ ::  is not the mouse a component of X ?
[00:42] <EriC^^> Bashing-om: yeah
[00:42] <EriC^^> i was hoping the upgraded x related packages would help with that
[00:42] <EriC^^> wilmer_: sudo parted -l
[00:43] <Bashing-om> wilmer_: ^^ We think'n on the mouse; internet: .. hard wired or WIFI ?
[00:44] <wilmer_> Bashing-om, wired
[00:44] <wilmer_> EriC^^, http://paste.ubuntu.com/9574976/
[00:45] <Bashing-om> wilmer_: Good that it is wired .. that I can handle easier .
[00:45] <EriC^^> wilmer_: sudo mount /dev/mapper/ubuntu--vg-root /mnt
[00:45] <EriC^^> wilmer_: sudo mount /dev/sda1 /mnt/boot
[00:45] <EriC^^> for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done
[00:46] <wilmer_> Bashing-om, the mouse is usb and the keyboard is ps2. When I load up Ubuntu it complains that the old raid card isn't responding and I should hit S to continue. Keyboard workes fine. No mouse though. The first time I loged in thou the keyboard wasn't responding eather. So I had to do a hard reset. But since then I have no issue with keyboard
[00:47] <wilmer_> EriC^^, done!
[00:48] <EriC^^> wilmer_: next time you boot you can try to unplug and plug the mouse back in, it sometimes works
[00:48] <EriC^^> wilmer_: sudo chroot /mnt
[00:48] <wilmer_> EriC^^, tried it.. didn't work..
[00:48] <EriC^^> wilmer_: oh ok
[00:48] <wilmer_> EriC^^, I have to do the same with my card-reader.. very anoying
[00:49] <wilmer_> EriC^^, done
[00:49] <EriC^^> wilmer_: try to install an earlier kernel, apt-get install linux-image-3.13.0-40-generic
[00:49] <pac1> I've got a folder on one ubuntu installation that I want to share with another.  I've set up sharing on the folder and left things as the default with group set to my user's group.  When I try to access the share from another ubuntu machine, domain is WORKGROUP, username is different so I change to the user name on the other machine and enter the password for the other machine.  Clicking connect just brings me back to the original p
[00:49] <pac1> assword required screen with my user name from the second machine.  Is the workgroup setting right?  Is there something to set up on the second machine before I can actually connect to the other machine's samba share?
[00:50] <wilmer_> EriC^^, http://paste.ubuntu.com/9575009/
[00:50] <joeslie> hi
[00:50] <EriC^^> wilmer_: ok, i guess it was never really uninstalled
[00:51] <EriC^^> wilmer_: type dpkg -l | grep linux-image
[00:51] <joeslie> have anyone tested to hack wpa2 psk router and is it worked?
[00:51] <pistdov> what does this error in ubuntu mean?
[00:51] <pistdov> http://25.media.tumblr.com/tumblr_m96fz5hf131ruqx7vo1_1280.gif
[00:51] <Bashing-om> wilmer_: EriC^^ :: Package manager is sure confused, we know that it is not true that -40 is installed . Think'n .
[00:51] <wilmer_> EriC^^, http://paste.ubuntu.com/9575027/
[00:52] <EriC^^> Bashing-om: it might be cause it was manually deleted from /boot
[00:52] <OerHeks> pac1, add a user to smb, sudo smbpasswd -a <user_name>
[00:52] <wilmer_> EriC^^, I will NEVER do that again *chills*
[00:52] <Bashing-om> EriC^^: Yepper ! Now that will really confuse the package manager ! . A chore now to fix .
[00:52] <EriC^^> wilmer_: apt-get purge linux-image-3.11.*
[00:53] <Es0teric> how do i check if a specific port is open?
[00:53] <wilmer_> EriC^^, done... semed to go fine
[00:54] <EriC^^> wilmer_: apt-get purge linux-image-3.13.0-{24,27,29,40}-generic
[00:54] <pac1> OerHeks, should it be a user on the machine where the share exists, or the user name from outside?
[00:54] <pac1> chisel1742
[00:55] <pac1> chisel1742
[00:55] <wilmer_> EriC^^, done. Saw some errors fly by... do you need a  pastebin on that?
[00:55] <OerHeks> pac1, on the pc with the share.
[00:55] <Es0teric> can anyone tell me how to check if a specific port is open?
[00:55] <wilmer_> EriC^^, libkmod: ERROR ../libkmod/libkmod.c:556 kmod_search_moddep: could not open moddep file '/lib/modules/3.16.0-23-generic/modules.dep.bin'
[00:55] <wilmer_> EriC^^, amongst others
[00:55] <OerHeks> pac1, after that, sudo service smbd restart
[00:55] <EriC^^> wilmer_: odd
[00:56] <EriC^^> i guess it has to do with the live usb being 14.10
[00:56] <EriC^^> wilmer_: apt-get install linux-image-3.13.0-40-generic
[00:56] <pac1> OerHeks, I tried adding the username from the other machine but it failed.
[00:57] <wilmer_> EriC^^, done
[00:57] <pac1> The username from the machine with the share does work.
[00:57] <EriC^^> wilmer_: try to autoremove it should clean up stuff
[00:57] <EriC^^> wilmer_: apt-get autoremove
[00:58] <wilmer_> EriC^^, done
[00:58] <EriC^^> wilmer_: cat /var/log/Xorg.0.log
[00:59] <Bashing-om> wilmer_: EriC^^ :: What does the package manager now think ? -> apt-get -f install , dpkg -C <- .
[00:59] <wilmer_> EriC^^, http://paste.ubuntu.com/9575064/
[00:59] <pac1> didn't have to restart the service.
[01:01] <wilmer_> Bashing-om, http://paste.ubuntu.com/9575067/
[01:01] <EriC^^> wilmer_: cat /var/log/syslog
[01:02] <wilmer_> EriC^^, is the last 500 rows enough? It's realy big!
[01:03] <EriC^^> wilmer_: yeah sure
[01:04] <EriC^^> wilmer_: tail -n 500 /var/log/syslog
[01:04] <wilmer_> EriC^^, http://paste.ubuntu.com/9575075/
[01:05] <wilmer_> tvheadend still in debug logging.. .sorry about that :-/
[01:06] <Bashing-om> wilmer_: EriC^^ :: Package manager appears to be in a happy state : ) .
[01:07] <wilmer_> Bashing-om, When I did the reboot I noticed that it read Ubuntu 14.04 LTS on the loginscreen. ..
[01:07] <wilmer_> Bashing-om, always something... At least she is happy
[01:09] <Vivekananda> hi
[01:09] <Bashing-om> wilmer_: More confidence we are ip solid on 14.04 !
[01:09] <Vivekananda> back after sleep . Can someone tell me how to rsync but without some folders
[01:10] <EriC^^> wilmer_: Bashing-om reboot and test earlier kernel?
[01:10] <EriC^^> why's the net not working though
[01:10] <wilmer_> EriC^^, try it now? just reboot?
[01:10] <EriC^^> Vivekananda: add --exclude
[01:10] <Bashing-om> EriC^^: wilmer_ :: I am not too hot on Intel modules, does this say we have a problem " (**) FBDEV(1): claimed PCI slot 0@0:2:0 " Not at all what I expected for a graphics driver ? // And to this time I see no entry for the mouse .
[01:11] <wilmer_> I have not bothered with a graphic card. I use the built in on the motherboard.
[01:12] <Vivekananda> EriC^^: also I tried man du looking for du -h --max-depth=1 but output in descending order of size
[01:12] <Vivekananda> how do I do that
[01:13] <EriC^^> Vivekananda: add | sort -nr maybe
[01:13] <EriC^^> -n for ascending
[01:13] <wilmer_> EriC^^, Bashing-om should i try a reboot?
[01:14] <Vivekananda> I dont see -n on the help page though
[01:14] <EriC^^> Vivekananda: man sort
[01:14] <Vivekananda> oo ok I thougth was for du . got it
[01:15] <wilmer_> Bashing-om, Can it be that my new raid card is on the pcie port on the motherboard and I use the built in graphic card?
[01:16] <EriC^^> wilmer_: try nmcli -p con list
[01:16] <EriC^^> wilmer_: maybe we can setup the network manager
[01:17] <wilmer_> EriC^^, http://paste.ubuntu.com/9575133/
[01:17] <batabatu> u> i'm having some problems with a modem. Is there a way to "tee" the output of the serial port so that I can monitor it while a program is using it? Eg I'd like to use wvdial to communicate with the modem, but see all the traffic between wvdial and the modem
[01:17] <Vivekananda> EriC^^: -n does sorting based on numbers not ending k / mb / gb so I will look for an alternative
[01:17] <Bashing-om> wilmer_: More concerned presently with networking ( that mouse still may be a bios setting !) .. If you are happy with fall back for graphics, fine .
[01:18] <EriC^^> Vivekananda: you need to use du without -h
[01:18] <wilmer_> Bashing-om, its ok ... I seldom use the monitor on this .. I ssh into it
[01:19] <wilmer_> Bashing-om, I have not changed anything in BIOS since it worked. But hey.. its computors were talking about.
[01:20] <EriC^^> wilmer_: try nmcli con list uuid e1d7bfb2-539a-4b85-bab6-679f2f4bc484
[01:20] <Bashing-om> wilmer_: I went throght power outages last nite - after I had shut down. When I fired up this AM I had to reset my bios !
[01:21] <wilmer_> http://paste.ubuntu.com/9575151/
[01:21] <wilmer_> Bashing-om, :-)
[01:21] <wilmer_> Bashing-om, magic
[01:22] <wilmer_> Bashing-om, Mouse workes in bios settings and now, when on the live session on the same computor...
[01:23] <wilmer_> EriC^^, Bashing-om A bit curiouse.. Did we change the kernel version? If so... Should I reboot just to check if there still is problem with network and mouse?
[01:23] <wilmer_> EriC^^, Bashing-om or is it not related?
[01:24] <Bashing-om> wilmer_: EriC^^ :: I do think it is time to boot into the install proper, to grub and boot up the -40 kernel, see what then is .
[01:25] <Bashing-om> wilmer_: I would for the mouse think it is a configuration thing in the install, as mouse works in the liveUSB .
[01:26] <Vivekananda> Does rsync -a -v --relative  source dest . copy all the hidden files too ( system being copied is windows) ?
[01:26] <acu> how can I install virtualenv in ubuntu 12.04 ?
[01:26] <wilmer_> Ill do a quick check to se if something has changed. Back in a flash
[01:28] <EriC^^> acu: sudo apt-get install virtualenv
[01:34] <wilmer_> EriC^^, Bashing-om Im back... no luck
[01:35] <Vivekananda> what is the cli way to encrypt a foder in external hard drive
[01:35] <wilmer_> EriC^^, Bashing-om are we running out of ideas?
[01:35] <Vivekananda> is there an on the fly way to do so ?
[01:35] <ubuntu22w> how difficult would it be to install windows 8 fresh and then ubuntu along side
[01:35] <Vivekananda> ubuntu22w: shouldnt be very difficult
[01:35] <bubbasaures> ubuntu22w, easy here.
[01:36] <Vivekananda> just follow a guide.
[01:36] <ubuntu22w> guide?
[01:36] <EriC^^> !uefi | ubuntu22w
[01:36] <ubuntu22w> without UEFI
[01:37] <ubuntu22w> as in on a machine that does not have UEFI
[01:37] <wiwa> hello everyone
[01:37] <wiwa> :-D
[01:37] <Bashing-om> wilmer_: No, there is no quit in my nature, ( do not want to interfere with EriC^^ ) .. wilmer_ :: http://paste.ubuntu.com/9575251/ ; My /var/log/Xorg.0.log , see how thr mouse is identified and assigned ! Why I keep coming back that bios is not passing off the mouse .
[01:37] <bubbasaures> ubuntu22w, We will be the best help when you get to installing Ubuntu, after the windows install.
[01:37] <Vivekananda> for the ubuntu version you are installing just follow the dual boot guide on it anywhere. Usually a good idea to have clear correct partitions and also ( for old installs) one did windows first coz grub auto recognizes windows but not the other way round
[01:38] <Vivekananda> bubbasaures: beat me to it :)
[01:38] <wilmer_> Bashing-om, still.. it does so to the liveusb...
[01:38] <EriC^^> Bashing-om: could a acpi_off help here?
[01:39] <EriC^^> acpi_something i think it has to do with mouse support and other stuff where linux pretends to be windows for the bios
[01:39] <Vivekananda> Can I browse a .vhd file in bash / shell/cli on live ubuntu ?
[01:39] <Bashing-om> wilmer_: Yes, but the liveUSB does utilize different drivers . // For now though, my little mind, let's see what we can do to get networking up . (??)
[01:39] <acu> Does anyone know how to install python-virtualenv in ubuntu 12.04 ? Obviously I tried apt-get and there is no package
[01:40] <daftykins> Vivekananda: anyone in here that's used encryption seems to have suffered from drama at some point or another
[01:40] <wilmer_> Bashing-om, oki. Sounds good
[01:40] <EriC^^> Bashing-om: noapic or nolapic maybe? http://ubuntuforums.org/showthread.php?t=1613132
[01:41] <trism> acu: do you have universe enabled?
[01:41] <Bashing-om> EriC^^: wilmer_ :: mouse, All I know presently is that the system is not seeing the mouse. As to why - well, that may be an adventure in learning for me .
[01:42] <flexus2> Vivekananda: vbox you mean?
[01:42] <acu> trism: how do you do that ?
[01:42] <acu> I have precise main restricted
[01:42] <acu> do I need to add anything ?
[01:42] <Bashing-om> EriC^^: You my friend are the 1st responder .. where do you want to go next with this ?
[01:43] <Vivekananda> flexus2: I had a virtual drive created on win 8.1 an dhad stuff in it
[01:43] <Vivekananda> now want to see what is in there and if ther eis anything worth salvaging
[01:43] <flexus2> Vivekananda: vboxmanage - depends what you want to do
[01:44] <flexus2> Vivekananda: mount it
[01:44] <EriC^^> Bashing-om: googling :)
[01:45] <Vivekananda> flexus2: the current situation is that my windows box is boot. I am logged into it through a ubuntu 12 live usb and trying to back up stuff. I had a file.vhd in windows and want to now browse it to see if anything can be copied over. Also  the live usb is in cli mode and no gui
[01:45] <nidal> Hello
[01:45] <Vivekananda> flexus2: can I mount is like the other mounts in the cli with : sudo mount file.vhd /destination  ?
[01:45] <flexus2> Vivekananda: .vhd is only like the "header" - you want vdi
[01:45] <wilmer_> EriC^^, Bashing-om could it be as dumb as that all I have to do is klick on the little network icon and choose my network and .. vola? If I only had a mouse pointer... :-)
[01:46] <EriC^^> wilmer_: i don't know if it's a matter of settings or not
[01:46] <EriC^^> wilmer_: the nmcli showed it as listed with autoconnect enabled
[01:46] <flexus2> Vivekananda: sudo find / -name *.vdi
[01:46] <Bashing-om> wilmer_: A server, and you have installed a network manager ?
[01:47] <EriC^^> Vivekananda: you need quotes for that
[01:47] <EriC^^> ( "*.vdi" )
[01:47] <wilmer_> Bashing-om, I'm a happy n00b.. I like frontends.. :-)
[01:47] <Vivekananda> flexus2: nope coz currently I tried ls -lha and the filename.vhd says 101G on output. it cannot be just headers. This vhd was not a virtualbox or vmware one. I created it using windows8.1  'create virtual disk '
[01:47] <EriC^^> Bashing-om: it's not a server install, is it?
[01:48] <EriC^^> wilmer_: it's a desktop install right?
[01:48] <wilmer_> Bashing-om, This used to be my little plaything until things got seriouse and became TV-streamer and filesharing
[01:48] <flexus2> Vivekananda: ok windows
[01:48] <daftykins> Vivekananda: got an external disk to move it onto?
[01:48] <wilmer_> EriC^^, yepp its a desktop
[01:48] <Bashing-om> wilmer_: Nothing wrong with them there GUI frontends - when they work . Be aware I have not touched a Network Manager in years . Maybe a lot of poking on my part to get to the bottom of where the problem is .
[01:48] <Vivekananda> daftykins: heyyyy
[01:48] <Vivekananda> good to see you
[01:49] <daftykins> morning o/
[01:49] <daftykins> i warn you i'm rather drunk.
[01:49] <nidal> Someone know how to install the latest Gnome Do on Ubuntu 14.10, please ?
[01:49] <EriC^^> lol daftykins
[01:49] <daftykins> EriC^^: :)
[01:49] <EriC^^> :)
[01:50] <Bashing-om> daftykins: " daftykins> i warn you i'm rather drunk. " now are we going to have fun ?
[01:51] <Vivekananda> daftykins: yes I got external disk and currently trying to move the whole of the .vhd file to it
[01:51] <Bashing-om> wilmer_: Networking: can you talk to the router ? what returns -> route -n <- ?
[01:51] <Vivekananda> but would help if I can somehow look into it
[01:51] <freeroute> nidal: can you speak?
[01:51] <wilmer_> Bashing-om, need to reboot to try that ...
[01:52] <nidal> yes freeroute :p
[01:52] <Vivekananda> flexus2: yeah . To rieterate I am salvaging files from windows 8.1 machine using ubuntu live 12
[01:52] <EriC^^> wilmer_: can you talk from a phone while you're booted
[01:52] <wilmer_> I could not se a interface when I did a ifconfig ....
[01:52] <daftykins> Vivekananda: if i'm honest i didn't even know windows 8 could create virtual hard disks natively 0o so you're in a live session and just trying to copy a VHD from NTFS to... some external disk?
[01:52] <EriC^^> browse to webchat.freenode.net
[01:52] <nidal> Someone to help me please ?
[01:52] <Vivekananda> yeah daftykins . And windows 8.1 got that functionality
[01:52] <flexus2> Vivekananda: isnt this stuff scrambled..?
[01:52] <freeroute> nidal: ok, so if you can speak that means you don't have to register with nickserv here (although it's recommended, but we can do that at a later time)
[01:53] <daftykins> Vivekananda: mmm, i know it can mount images directly but i don't know what'd open VHDs on a Linux :(
[01:53] <Vivekananda> flexus2: I will just try to enter it . what did you mean scrambled ?
[01:53] <freeroute> nidal: right, ok. So I asked you already how comfortable you were with the commandline. Have you used the commandline before?
[01:53] <EriC^^> wilmer_: try to chroot
[01:53] <EriC^^> wilmer_: then upgrade to 14.10
[01:53] <flexus2> Vivekananda: sometimes windows encrypts his stuff without asking
[01:53] <nidal> freeroute, a little bit :d
[01:54] <wilmer_> EriC^^, I was just about to ask that
[01:54] <nidal> freeroute,  some apt-get :d
[01:54] <Vivekananda> flexus2: guess you ar eright . it is just a huge file
[01:54] <wilmer_> Ive already chrooted
[01:54] <EriC^^> did you mount /dev and the rest?
[01:54] <Vivekananda> but I am copying it fully over
[01:54] <wilmer_> EriC^^, How to upgrade to 14.10?
[01:54] <Vivekananda> EriC^^: for me ?
[01:54] <wilmer_> EriC^^, yepp
[01:54] <EriC^^> wilmer_: do-release-upgrade
[01:54] <EriC^^> see if it returns anything
[01:54] <EriC^^> Vivekananda: no
[01:54] <Vivekananda> sorry
[01:55] <freeroute> ok nidal, let's start with the following: what is the problem you were experiencing with Gnome-do which made you look at the possibility of installing the new version from source.
[01:55] <freeroute> ?
[01:55] <wilmer_> EriC^^,
[01:55] <nidal> freeroute, the screen freeze and i need to reboot the computer, or end the processus :/
[01:55] <wilmer_> EriC^^, No new release found
[01:56] <acu> hello, can anyone tell me how to install virtualenv in ubuntu 12
[01:56] <freeroute> nidal: all right, that pretty much sucks indeed. I hate rebooting my computer. So how then do you know that installing the new version will fix this?
[01:56] <EriC^^> wilmer_: i think you have to modify the Prompt=
[01:57] <nidal> freeroute, this is the only problem facing everyone with this release on 14.10
[01:57] <Vivekananda> acu: does this help http://roundhere.net/journal/virtualenv-ubuntu-12-10/
[01:57] <wilmer_> EriC^^, where did I find that?
[01:57] <nidal> freeroute, first of all i tried with the same Ubuntu on an another computer
[01:58] <nidal> freeroute, then i found the same problem on the gnomedo's website
[01:58] <Vivekananda> I am still not very sure of what folders to backup for one note
[01:58] <EriC^^> wilmer_: nano /etc/update-manager/release-upgrades
[01:58] <squinty> acu:  http://packages.ubuntu.com/search?searchon=contents&keywords=virtualenv&mode=exactfilename&suite=precise&arch=any    if you are using 12.04 then that package should be installable via the standard repo's
[01:58] <nidal> freeroute, https://bugs.launchpad.net/do/+bug/1390341
[01:59] <freeroute> nidal: I see. Makes sense.
[01:59] <AlphaTech> I made a rsa key (.ssh/id_rsa.pub) and put it onto another server as .ssh/authorized_keys. On the server that I generated the rsa key on, it is still asking me for the SSH password to the other server
[01:59] <EriC^^> wilmer_: set it to normal
[01:59] <nidal> freeroute, so i just want to know how to install the latest version from tar.gz
[01:59] <Vivekananda> Also if anyone could advise me. The reason I am backing up windows is I hosed the system and as a result I see " no interface supported" . This solution is for windows but I wonder if I could execute it using my linux live cd  :  http://pyrocam.com/re-register-all-dlls-to-fix-no-such-interface-supported-error-in-windows-7-after-installing-ie7-standalone/
[02:00] <freeroute> nidal: have you already tried the workaround which was written in the first comment?
[02:00] <Vivekananda> currently my system does not recognize anything
[02:00] <Vivekananda> ie any sort of clicks
[02:00] <freeroute> nidal: I'm first trying to figure out whether there's an easier solution before helping you with compiling.
[02:00] <wilmer_> done ... and upgrading
[02:00] <EriC^^> wilmer_: nevermind, there are only 2 options anyways, doh
[02:00] <Techspectre> So if I buy this card http://www.newegg.com/Product/Product.aspx?Item=N82E16829271007R am I in for trouble trying to make it work with ubuntu?
[02:01] <AlphaTech> Help me please!
[02:01] <EriC^^> wilmer_: do-release-upgrade is working? to 14.10?
[02:01] <wilmer_> EriC^^, I changed it to normal
[02:01] <nidal> freeroute, i have not tried the solution on the first comment
[02:01] <squinty> !ask | AlphaTech
[02:01] <nidal> freeroute, i do not like use commands i don't know
[02:01] <freeroute> AlphaTech: check permissions and the fact that you updated the /etc/ssh/sshd.conf and restarted the sshd
[02:02] <nidal> freeroute, last time i did that i screwed up
[02:02] <freeroute> nidal: understandably so, but if you look closely it's not a command. It's just a setting you can reach through the menu.
[02:02] <wilmer_> EriC^^, yepp. It downloads all now
[02:03] <nidal> freeroute, okey if you can guide me then...
[02:03] <EriC^^> wilmer_: ok
[02:04] <AlphaTech> freeroute: /etc/ssh/sshd.conf exists on neither of the servers. I am not sure how to restart the sshd.
[02:04] <wilmer_> EriC^^, O how i hope this workes now... I realy need to get some sleep. Its 2AM and its my turn to get up whach the kids in the morning... oh in some 4 hours or so
[02:04] <freeroute> nidal: just whatever it says in the comment. You can disable “show on start”. You can find that under gconf-editor - apps → gnome-do → preferences → CorePreferences → QuietStart.
[02:04] <Vivekananda> anyone care to comment
[02:05] <nidal> freeroute, i don't know what its means and i can't find "gconf-editor"
[02:05] <freeroute> AlphaTech: can you ls -lahF the contents of /etc/ssh/ ?
[02:05] <freeroute> nidal: how about that menu under apps?
[02:06] <AlphaTech> freeroute: It is named ssh_config
[02:06] <nidal> freeroute, menu under apps ?
[02:06] <freeroute> AlphaTech: have you connected to that server before with ssh?
[02:07] <AlphaTech> freeroute: Yes
[02:07] <AlphaTech> freeroute: But I had to use the password (which I don't want to do because I'mm making an automated rsync script)
[02:07] <freeroute> nidal: you know where to find that search thingy? I think it's called a glass or something.
[02:08] <nidal> freeroute, yes i know where i can find it
[02:08] <freeroute> AlphaTech: that means on that server you should have sshd running, otherwise you wouldn't be able to connect through SSH.
[02:08] <freeroute> nidal: right, so what happens if you type gconf-editor there?
[02:08] <AlphaTech> freeroute: The sshd is running!
[02:09] <nidal> freeroute, i don't have it ^^
[02:09] <Loshki> AlphaTech: please pastebin the client output from ssh -v <host>
[02:09] <EriC^^> wilmer_: ok, if the tv server doesn't work, get creative with santa claus lines :D
[02:09] <freeroute> AlphaTech: congrats, and your key is in the .ssh/ dir of the user you are using to connect to on the server?
[02:10] <EriC^^> wilmer_: nighty, have a good one :)
[02:10] <Loshki> EriC^^: my minidlna server keeps crashing :-)
[02:10] <wilmer_> EriC^^, That wont be a problem. My children will hang me from the xmas tree.. and all my problems gets solved
[02:10] <AlphaTech> freeroute: Correct
[02:10] <freeroute> nidal: hmm, well I have a different interface, so I'm not really sure how you're able to find it.
[02:10] <AlphaTech> freeroute: I also just restarted the SSHd and that didn't help
[02:11] <EriC^^> wilmer_: lol :D
[02:11] <nidal> freeroute, i installed
[02:11] <freeroute> AlphaTech: if the sshd.conf file is not edited in a manner in which you state that you _only_ want to login using keys and not password, then you can restart the sshd service all you want but it still won't make a difference.
[02:12] <freeroute> also AlphaTech, listen to Loshki
[02:12] <nidal> freeroute, im installing gconf-editor and gnome-do, i need to know how to find a processus and kill him if it's freeze again
[02:12] <wilmer_> EriC^^, Bashing-om in five minutes we will know. If it wont work Ill go to sleep and prepare myself for a format and reinstall. Thanks for all help with this. You guys rock!
[02:13] <Bashing-om> wilmer_: Hang'n in there . We do try .
[02:13] <freeroute> AlphaTech: and make sure you read this - https://help.ubuntu.com/community/SSH/OpenSSH/Configuring
[02:14] <freeroute> nidal: I think you can do that with gnome-process-monitor (or whatever that is called nowadays)
[02:14] <nidal> freeroute, gnomedo and gconf are installed, but i can't find gnome on gconf
[02:15] <freeroute> nidal: so you don't get any results when searching gconf-editor?
[02:16] <nidal> freeroute, nop but i installed it
[02:16] <freeroute> nidal: ah here we go - https://help.ubuntu.com/community/GConfEditor - "The Configuration Editor is hidden by default in the System Tools submenu. Access it by pressing Alt+F2 and typing gconf-editor. Under apps are the settings for all applications that use Gconf to store user preferences."
[02:17] <nidal> freeroute, i already tried that, it's not working, but i installed gconf-editor
[02:17] <freeroute> hmm
[02:18] <nidal> freeroute, on the bug-fix the told to follow this "apps→gnome-do→preferences→CorePreferences→QuietStart" but i can't found that
[02:18] <freeroute> yeah that's after you find the mysterious gconf-editor
[02:18] <freeroute> let's see if it can be started from the commandline
[02:18] <squinty> nidal:  try starting from terminal > see what errors.  also  which gconf-editor    or   locate gconf-editor
[02:19] <freeroute> ^
[02:19] <freeroute> nidal: so just go to terminal and type 'which gconf-editor' (without the apostrophes)
[02:19] <nidal> freeroute, i found this schemas>apps>gnome-do>preferences>Do>CorePreferences
[02:19] <t43tg3hh4> hey, i have 2 partitions if i merge the two partitions will it delete the data on both?
[02:20] <freeroute> nidal: oh, I suppose that can work too. Is that quiet start option there?
[02:20] <nidal> yes
[02:20] <nidal> freeroute, but i can't found the "disable on start" ^^
[02:21] <freeroute> nidal: also not "show on start" ?
[02:21] <freeroute> perhaps it's there somewhere
[02:21] <nidal> i can't solve this problem with english seriously...
[02:21] <flexus2> Vivekananda: hmm converting to iso seems possible vboxmanage clonehd sourcefile.vhd targetfile.iso --format RAW
[02:22] <freeroute> nidal: we're doing fine so far
[02:22] <nidal> freeroute, i found "QuietStart" but i can't find "show on start"
[02:23] <nidal> freeroute, even with the right click mouse
[02:23] <freeroute> nidal: btw, have you tried updating your release? Maybe the new version is already there?
[02:23] <freeroute> nidal: apt-get update && apt-get upgrade
[02:24] <nidal> freeroute, i tried it's the last version on the ubuntu installer...
[02:24] <t43tg3hh4> so does anyone know?
[02:24] <Amr0d> hey everyone
[02:25] <freeroute> t43tg3hh4: if they are not LVM partitions then yes
[02:25] <freeroute> nidal: damn, this seems weird. Can you take a screenshot and upload it to imgur.com?
[02:25] <nidal> freeroute, yes
[02:25] <freeroute> (of that corepreferences menu)
[02:26] <xieyi> I want to host a ledgersmb on my ubuntu 14.04
[02:26] <AlphaTech> freeroute: I edited the config on the server that I will be accessing to match what I want and then I restarted the sshd. Still, nothing is working
[02:26] <xieyi> I have install the prebuilt package
[02:26] <t43tg3hh4> freeroute, so how would i check if they are LVM partitions?
[02:26] <nidal> freeroute, http://i.imgur.com/EUShJ0O.png
[02:26] <xieyi> but I found I can only access ledgersmb from the server side.
[02:27] <xieyi> I cant access from remote side
[02:28] <xieyi> does anyone know how to do it
[02:28] <_303_> hello.. what terminal do u prefere to use?
[02:29] <freeroute> nidal: what happens if you double-click on QuietStart?
[02:29] <AlphaTech> xieyi: http://ledgersmb.org/news/ubuntu-installation-tutorial-ledgersmb-13-series
[02:29] <xieyi> AlphaTech: I will check it out
[02:29] <nidal> freeroute, it's in french you're sure you want to know ? :p
[02:29] <AlphaTech> xieyi: 'k
[02:30] <jardineworks> hey guys -- I'm sure this is an easy one for someone in here.
[02:30] <Vivekananda> flexus2: thanks. but if I copied the whole thing over i should be able to copy it back and open it shouldnt I ?
[02:31] <freeroute> t43tg3hh4: if you haven't consciously have to setup LVM, then they're not LVM
[02:31] <jardineworks> I have a VM with two interfaces. One is a host-only adaptor and one is a NAT. The host-only adaptor is using 192 and in my route table I can see 192.0.0.0 for eth1
[02:31] <flexus2> Vivekananda: if you clone it the source should be untouched
[02:31] <bradthepizzaman> can anyone help me with ipsec? i tried to verify the install and portfowarding failed and i dont know why
[02:31] <jardineworks> the NAT is dhcp and is a 10.0.0.0 which routes to the correct gateway to get out into the world
[02:31] <freeroute> AlphaTech: have you checked the permissions of .ssh/ and .ssh/authorized_keys on the server?
[02:31] <jardineworks> when I ping google.com, it worls
[02:31] <flexus2> Vivekananda: take care of enough free space
[02:31] <jardineworks> works*
[02:31] <jardineworks> when I ping github,com it fails
[02:32] <freeroute> AlphaTech: also, paste the contents of /etc/ssh/sshd_config on pastebin and give me the link
[02:32] <jardineworks> and I think it is because the ip that is resolved is 192.30... so I think it is routing on the wrong interface
[02:32] <jardineworks> Does that sound right?
[02:32] <freeroute> nidal: but when you double click it doesn't say anything about showing on start?
[02:34] <Vivekananda> flexus2: I am not going to extract it right now
[02:34] <nidal> freeroute, nope wait i'll try to translate that
[02:34] <Vivekananda> I will just rsync it an dback with the new system
[02:34] <Vivekananda> also could you tell me how to encrypt a file on the hard drive ( external) quickly
[02:34] <AlphaTech> freeroute: http://btrIRC.zapto.org/ssh_config and http://btrIRC.zapto.org/sshd_config
[02:34] <Vivekananda> do I do the tar -xvhf something
[02:34] <nidal> freeroute, Currently, patterns and pairs can not be edited.
[02:34] <nidal> This will be possible in a future release.
[02:35] <nidal> (thanks to Google Translate)
[02:35] <jardineworks> I am trying to do:: sudo route add -net 192.30.0.0 gw 0.0.0.0 netmask 255.255.0.0 dev eth0
[02:35] <flexus2> Vivekananda: what is dback ?
[02:36] <jardineworks> but I kepp getting an error about Invalid Argument
[02:37] <jardineworks> hah -- got it.. changed my gateway to 10.0.2.2
[02:37] <Vivekananda> flexus2: typo , I meant rsync it and get back with the new system
[02:38] <flexus2> vboxmanage clonehd and pipe it maybe works
[02:38] <freeroute> AlphaTech: do 'chmod 600 ~/.ssh/authorized_keys' and 'chmod 700 ~/.ssh' on the server. Also, are you logging in through root?
[02:39] <AlphaTech> Freeroute: I do login as root but not using the rsa key... Chmodding now
[02:39] <freeroute> AlphaTech: don't. Make a user and login through that user.
[02:40] <freeroute> afterwards you can login as root. Logging is as root is VERY ill-advised.
[02:40] <freeroute> *you can change to root
[02:41] <Zumbido> isn't more easy to always use the root account, freeroute?
[02:42] <freeroute> nidal: ok, well it seems then the only option would be to either compile it or just wait until newer version gets released (which is on schedule). For compiling you can already start reading this a bit - https://help.ubuntu.com/community/CompilingSoftware
[02:42] <freeroute> Zumbido: it's easier to just not have a password and login automatically like that. Whether it's secure or not, that's a different story.
[02:42] <AlphaTech> freeroute: The chmod didn't help :/ and why not just login at root (I'm not logging in as root but more like a user with root priveliges.)
[02:42] <nidal> freeroute, héhé okey thanks :p
[02:42] <sgen__> Im trying to setup postfix to forward mail to my gmail account, however after sending a test email it doesnt seem to be working. Here are my main.cf and virtual alias file: http://pastie.org/private/p4ea2rarshbyvme5ejay7a , http://pastie.org/private/abc0pwojnqgmfunonmi1g
[02:44] <freeroute> AlphaTech: right, login as a normal user and then once logged in you can do 'sudo su' or something like that. I just wanted to make sure you weren't editing the .ssh/ dir of the root account.
[02:44] <AlphaTech> freeroute: No worries, I wasn't
[02:45] <sheap> how would I read line by line from 2 different variables and then output that to one file? like var1line1/var2line2 var1line2/var2line2 >> file.txt
[02:45] <AlphaTech> freeroute: Did you detect any issues in my configuration files?
[02:45] <Ben64> freeroute, AlphaTech: shouldn't do "sudo su"
[02:45] <njord> hi..
[02:46] <freeroute> Ben64: how so?
[02:46] <Ben64> freeroute: sets an incorrect environment
[02:46] <njord> have a question about how to create a dail up connection from mobile device in cli ..
[02:47] <freeroute> AlphaTech: not really, you should probably set 'PermitRootLogin no' and 'X11Forwarding no'
[02:47] <freeroute> Ben64: right, it then assumes root account's environment right?
[02:47] <psijet> Ho-hum. I should probably look into changing my icons.
[02:48] <Ben64> freeroute: not exactly. anyway, should do "sudo <command>" instead of getting a root shell. if you actually need a root shell (you probably don't) the proper way is "sudo -i"
[02:49] <AlphaTech> freeroute: Okay, I'll try that and get back to you
[02:50] <dm7freek> so, I'm trying to be able to mount a folder (/foo/bar) from my wkstn onto my localhost, and I'm getting access denied by the server. here's the kicker: /foo is a mount point on wkstn for a 3rd machine (X). X exports /foo and squashes root to nobody. wkstn exports /foo/bar and squashes root to dm7freek (who owns bar) and localhost is mounting as root.
[02:50] <dm7freek> localhost is centos, wkstn is ubuntu, and X is BSD
[02:50] <AlphaTech> freeroute: Yup, it's still begging me for the password
[02:51] <samthewildone> on more serious news, is there a new ati driver ?
[02:51] <samthewildone> the open source one ain't the best thing since sliced bread and the prop drivers are better but, glitch heaven.
[02:52] <freeroute> AlphaTech: did you restart the sshd service on the server?
[02:52] <AlphaTech> freeroute: yes I did
[02:52] <batabatu> I'm having some difficulties connecting to the internet using a 3G modem. The modem connects fine over usb. However over a serial connection it doesnt. I can send AT commands over the serial port which seem to work fine. I'm using the same wvdial.conf for both USB and serial connection apart from the name of the serial port. But for some reason it just won't connect when using the serial port. Any suggestions?
[02:53] <freeroute> AlphaTech: just to be clear, you did that after applying modifications, right?
[02:53] <AlphaTech> freeroute: Of course, I'm not that stupid ^_^
[02:53] <freeroute> right, just making sure :p
[02:54] <AssociateX> Hello all
[02:54] <freeroute> AlphaTech: I've stumbled across simpler mistakes :p
[02:54] <freeroute> AlphaTech: also, just to be clear, if you configured a passphrase to your ssh key, it will ask you for that.
[02:56] <AlphaTech> freeroute: No, I just clicked return
[02:59] <freeroute> AlphaTech: k, well then post the output to 'ssh -v user@host'
[02:59] <freeroute> (in a pastebin)
[03:00] <User525253> Alright, I'm a somewhat ubuntu/linux newbie, and I need some quick tech support
[03:00] <User525253> basically the story is.. my SATA ports on my brother's old HP desktop died (running windows), and I've concluded that the motherboard is now faulty, BUT that is not my issue
[03:01] <User525253> So, to make the desktop usuable for my brother for now, I'm thinking of doing a full-ubuntu install on a USB drive, and have it set up before my brother gets home in an hour
[03:01] <AssociateX> I need a stripped down release that every thing works. I don't want KDE
[03:01] <bazhang> use persistent then User525253
[03:02] <User525253> So I got ubuntu installed, the usb keyboard works.. but the usb mouse doesn't work
[03:02] <User525253> that's my issue
[03:02] <bazhang> AssociateX, try lubuntu
[03:02] <bazhang> nothing lighter
[03:02] <User525253> AND... the operating system is REDICULOUSLY slow at the same time (navigating through usb keyboard), not the case when I'm using the "live cd demo mode"
[03:03] <bazhang> !lubuntu | AssociateX
[03:03] <User525253> but I'm thinking of full install mode so my brother can still store documents
[03:03] <batabatu> any reason why a modem would connect over USB and not over serial? I'm using the identical wvdial.conf for both and can use minicom to send AT commands with both.
[03:03] <AssociateX> bazhang, I'm using that now.
[03:03] <bazhang> User525253, persistent usb
[03:03] <User525253> where'd I find that setting?
[03:03] <User525253> I never saw such an option
[03:03] <bazhang> User525253, you need to set it up that way
[03:03] <bazhang> !usb | User525253
[03:04] <bazhang> AssociateX, you want lighter than lubuntu?
[03:04] <User525253> That sounds like installing FROM usb drive.... not installing TO usb drive
[03:04] <User525253> am I correct about that link?
[03:04] <AlphaTech> freeroute: http://pastebin.com/fFS6kuk1
[03:04] <bazhang> no
[03:04] <User525253> ok
[03:05] <Vivekananda> kind of a non ubuntu question partially but I am trying to find out which drive is the recovery drive on a windows8.1 system using a live ubuntu12. Can someone give me what to look for in the commands ?
[03:05] <bazhang> its a run from usb, that allows saves
[03:05] <chris349> Is it possible to make a wifi connection always working? I replaced the wireless card and it seems the connections are tied to the card. Also, it would be nice if it connected during boot instead of after.
[03:05] <User525253> Gotcha
[03:05] <bazhang> fdisk -l Vivekananda
[03:06] <User525253> so it'll act more like a full operating system that way?
[03:06] <bazhang> may  need sudo
[03:06] <xieyi> I cant get ledgersmb's  perl script parsed.
[03:06] <delinquentme> so if I chmod a bash script to make it executeable ... is there some reason that i SHOULD be naming it with a .sh extension?
[03:06] <User525253> meaning documents and settings and programs will all be stored?
[03:06] <bazhang> User525253, yes, but slower
[03:06] <xieyi> did anyone meet the same problem
[03:06] <bubbasaures> Vivekananda, Oem's set them up how they like it, I would ask in #windows
[03:06] <Vivekananda> bazhang: yeah I did that also blkid  but I dont know which drive is the recovery drive in the list
[03:06] <xieyi> I have install mod_perl
[03:06] <User525253> But..  I'd imagine it'd at least be faster than its Live CD demo mode right?
[03:07] <bazhang> Vivekananda, check the filesystem, and the size, its small
[03:07] <xieyi> when i visite ledgersmb apache2 just show the content of the perl
[03:07] <User525253> my previous research told me that usb drives are slightly faster than cd/dvd, is that correct?
[03:07] <bazhang> User525253, likely but not a whole lot faster
[03:08] <bazhang> xieyi, try #httpd
[03:09] <User525253> ahh alright, I'm giving http://www.linuxliveusb.com/ a try!
[03:09] <User525253> says it supports "persistence mode creation\"
[03:09] <bazhang> yes
[03:09] <User525253> mkay
[03:09] <Rand0m`> User525253,
[03:10] <Rand0m`> i would prefer universal ub installer
[03:10] <Vivekananda> bazhang: my intent is to find out how big it is and then get a usb with the correct size and create a recovery usb
[03:10] <Rand0m`> usb*
[03:10] <bazhang> AssociateX, if you want lighter than lubuntu, you could try the mini iso and build up from that
[03:10] <bazhang> !mini | AssociateX
[03:10] <User525253> OOOH I think that's the software I've used in the past
[03:10] <User525253> Thanks!
[03:11] <bazhang> Vivekananda, thats the limit of my knowledge, ##windows is superb for this
[03:12] <Vivekananda> bazhang:
[03:12] <Vivekananda> okay
[03:12] <Vivekananda> a linux question . if I unmount an external hd from live ubuntu does also do the safe to remove ?
[03:12] <Vivekananda> also what is the unmount command ? : sudo umount destination ?
[03:13] <Vivekananda> or is it sudo umount /dev/sdmyNo ?
[03:13] <freeroute> AlphaTech: strange, it says password login is still enabled for some reason. How about do -vv instead of a single -v this time?
[03:14] <PovAddictW> what's a quick way to get the current ubuntu version/codename?
[03:15] <freeroute> AlphaTech: (also use something like kpaste.net next time, pastebin.com makes formatting a bit crap sometimes)
[03:15] <daftykins> Vivekananda: you can umount both the device or the mount point
[03:16] <Bashing-om> PovAddictW: lsb_release -a .
[03:17] <Vivekananda> okay
[03:20] <tnkhanh> Help! I'm trying to install a package from source but stuck in the loop: run "make" -> missing library -> install library -> run "make" again
[03:21] <trism> tnkhanh: did you install the -dev packages for the library?
[03:21] <daftykins> tnkhanh: build-essential installed?
[03:21] <bazhang> got build-essential installed?
[03:22] <tnkhanh> daftykins: bazhang: yes I have build-essential
[03:23] <daftykins> pastebin some output then
[03:23] <daftykins> also, what is it - because source is often a bad move
[03:23] <tnkhanh> i'm installing qt
[03:23] <AlphaTech> freeroute: http://kpaste.net/c6da28f5
[03:24] <tnkhanh> often make fails -> shows missing file -> I apt-file search the file -> install the package found -> rerun make
[03:25] <tnkhanh> daftykins: u got any suggestions?
[03:25] <lasthopetm> Hello, Im just installing Ubuntu 14.10 64 on a new computer that has a ASUS P8B75-M/CSM LGA 1155 Intel Motherboard and im having problems with the USBs. When I was installing it from the pendrive everything would work perfectly but when I boot for the first time from the actual HDD none of the USB ports work.
[03:25] <lasthopetm> Could anyone help me out with this?
[03:26] <bubbasaures> lasthopetm, You use a usb to install, just curious?
[03:27] <lasthopetm> Yes im installing it from a USB, and the keyboard and mouse work in the bios also
[03:27] <daftykins> lasthopetm: are you using USB 2 ports directly on the motherboard?
[03:27] <freeroute> AlphaTech: just wondering, how did you restart the sshd service on the server?
[03:27] <lasthopetm> Yes im using the 2.0 ports, ive heard of problems with 3.0
[03:28] <bubbasaures> lasthopetm, You state installed and installing which is it?
[03:28] <AlphaTech> freeroute: service ssh restart (as rift
[03:28] <PovAddictW> can someone confirm that all these packages exist in ubuntu 14.10? cmake libkf5config-dev kdoctools5 libkf5guiaddons-dev libkf5widgetsaddons-dev libkf5newstuff-dev libkf5dbusaddons-dev libkf5i18n-dev libkf5init-dev libkf5jobwidgets-dev kio-dev libkf5windowsystem-dev libkf5xmlgui-dev libkf5plotting-dev libkf5texteditor-dev libkf5iconthemes-dev libeigen3-dev libcfitsio3-dev zlib1g-dev libindi-dev
[03:28] <AlphaTech> freeroute: (*as root)
[03:28] <PovAddictW> try to apt-get install -s or something
[03:28] <lasthopetm> Its installed right now and none of the USBs work
[03:28] <PovAddictW> I'm writing compilation instructions on a wiki
[03:29] <EriC^^> PovAddictW: meet /msg ubottu !info <package>
[03:29] <freeroute> AlphaTech: and what was the output of that?
[03:29] <daftykins> PovAddictW: you install it and test.
[03:29] <bazhang> apt-cache search PovAddictW
[03:30] <PovAddictW> I don't have ubuntu myself
[03:30] <daftykins> PovAddictW: so install it with virtualbox or similar.
[03:30] <daftykins> PovAddictW: someone that can't test steps shouldn't be writing a guide, sorry.
[03:30] <EriC^^> i agree
[03:30] <bazhang> packages.ubuntu.com PovAddictW
[03:30] <PovAddictW> guide is already written, just needs the package list updated
[03:31] <daftykins> lasthopetm: are you in the ubuntu install right now? can you install "pastebinit" then run "dmesg > ~/dmesg && pastebinit ~/dmesg"
[03:32] <lasthopetm> let me restart and run Ubuntu from the USB again 1 sec
[03:32] <freeroute> AlphaTech: because I think the correct command is 'sudo service sshd restart', but before you do that, enable password logins just in case the keys don't work.
[03:33] <AlphaTech> freeroute: [ ok ] Restarting OpenBSD Secure Shell server: sshd.
[03:33] <AlphaTech> freeroute: sshd isn't a service, only ssh
[03:33] <freeroute> hmm
[03:36] <lasthopetm> ok it gave me a url
[03:38] <lasthopetm> http://paste.ubuntu.com/9576047/
[03:41] <Jeeves_Moss> I'm trying to get my touchscreen installed.  I know it's mapped to /dev/input/event1, but how do I get lxue to map it properlly?
[03:43] <chaospsychex> can ubuntu 12.04 be installed without the DE ?
[03:43] <tnkhanh> chaospsychex: u mean with Unity only?
[03:43] <bazhang> !mini
[03:44] <etzerd> hello all
[03:44] <etzerd> ?
[03:44] <tnkhanh> etzerd: hi
[03:44] <bazhang> see above chaospsychex
[03:44] <etzerd> how do I check the version of the distro that I'm using?
[03:44] <bazhang> !wersion
[03:44] <chaospsychex> no, I already have 12.04 on CD. I want to install without installing the Desktop Environment
[03:44] <bazhang> augh
[03:44] <bazhang> get the mini chaospsychex
[03:45] <etzerd> should I do that from the terminal?
[03:45] <lasthopetm> Did I lose you dafty?
[03:45] <etzerd> !version
[03:45] <bazhang> lsb_release -a
[03:45] <daftykins> lasthopetm: sorry just out of the room, looking...
[03:45] <etzerd> thanks
[03:46] <tnkhanh> etzerd: http://www.cyberciti.biz/faq/find-linux-distribution-name-version-number/
[03:46] <lasthopetm> No problem man thanks for the help :D
[03:46] <freeroute> AlphaTech: I'm baffled here. You should maybe ask over in #linux
[03:46] <daftykins> lasthopetm: hmm ok 1605 BIOS, 1701 is latest but only minor changes. have you tried 14.04.1 also?
[03:46] <lasthopetm> yeah I had the same issue
[03:47] <AlphaTech> freeroute: Got anything?
[03:47] <freeroute> AlphaTech: not really, maybe add another -v and paste it again? The output would be super verbose but at least I'll get a better picture.
[03:48] <freeroute> My guess is that the server is still somehow not configured properly.
[03:48] <daftykins> lasthopetm: are you installing EFI or legacy? (legacy is possibly called CSM)
[03:48] <freeroute> that or the privkey isn't being read right
[03:50] <lasthopetm> what would be a good way to find out? Im getting the 64 bit right from http://www.ubuntu.com/download/desktop and using Universal USB Installer. then it loads into the test environment and I install fromt there
[03:52] <daftykins> !efi | lasthopetm have a read here
[04:02] <we6jbo> Hi
[04:03] <we6jbo> Is there a simple way to distribute my java program and source to a ppa?
[04:03] <User525253> Alright
[04:04] <User525253> so I got my USB persistent installation working
[04:05] <User525253> But.. one annoying thing is that when things seem to by busy (stalling the system for about 20 seconds), the mouse cursor is stuck on the first/second monitor (aka. cursor cannot change monitor from where it's located)
[04:06] <User525253> Correction:  The cursor seems to have a hard time switching from first to second monitor when things are "busy" (and slow)
[04:06] <User525253> there's no remedy to that is there?
[04:06] <ghostx562> hello
[04:08] <Laureen23>  Free Porn for Life!. Click Here! http://bit.ly/1y2SGSo
[04:09] <batabatu> i have a 3g modem which can connect over usb to the internet. However when connecting the same modem, with the same wvdial.conf, over serial, it won't connect. I can send AT commands to the modem both over serial and USB so I can't figure out why it won't connect over serial
[04:10] <lasthopetm> alrighty, ran the USB with UEFI and everthing seems to be working now
[04:11] <lasthopetm> thanks for all the help dafty :D
[04:11] <OerHeks> !cookie | daftykins
[04:12] <SonikkuAmerica> lol
[04:12] <User525253> on an ubuntu installation to a USB drive (persistence mode), is it normal for the mouse cursor to have difficulty switching from the first to second monitor while things are "loading"?
[04:13] <User525253> (aka. cursor stuck on monitor #1 until things finish "loading")
[04:13] <User525253> it's rlly annoying
[04:13] <daftykins> lasthopetm: anytime :)
[04:13] <daftykins> OerHeks: ty :)
[04:13] <freeroute> AlphaTech: any luck with the output of that extra -v
[04:13] <freeroute> ?
[04:28] <dm7freek> Please help me with this mounting problem: https://gist.github.com/dmtucker/3f8f4d40c6c5bdc23401
[04:53] <xiaojunyu> join 520
[05:22] <bubbasaures> xiaojunyu, /j or /join
[05:23] <bubbasaures> has to be a channel
[05:33] <leonic> irc.immortal-anime.net
[05:33] <leonic> sorry about that
[05:35] <dts|pokeball> you should be
[05:35] <dts|pokeball> im traumatized
[05:47] <WHAT_UP> If I do xdotool windowminimize `wmctrl -l | grep Spotify | cut -d$' ' -f1`, it minimizes spotify. But if I have that in a bash script, it outputs "There are no windows in the stack" and "Invalid window '%1'". How do I get it to work also from a bash script?
[05:50] <joeslie> Hi
[05:50] <joeslie> can anyone help me?
[05:51] <cfhowlett> !help | joeslie
[05:52] <guest989> hi
[05:54] <joeslie> I have a problem using reaver when i going to attack an wpa 2 wifi using the function reaver-i mon0 -b XX:XX:XX:XX:XX:XX -vv  it shows Failed to associate with XX:XX:XX:XX:XX:XX essid:NULL
[05:56] <guest989> hi
[05:57] <guest989> interesting
[05:57] <guest989> lemme think about it n get back
[06:00] <joeslie> hello
[06:07] <cq-aux> Hi
[06:07] <lotuspsychje> morning to all
[06:08] <cq-aux> I'd like to install surfraw [without] surfraw extra, is that ok? and how do I apt-get do it?
[06:08] <cq-aux> lotuspsychje: heya
[06:09] <lotuspsychje> cq-aux: hello mate
[06:09] <lotuspsychje> !info surfraw
[06:10] <lotuspsychje> cq-aux: does the extra install by default?
[06:10] <cq-aux> I noticed that lynx is really small, but surfraw-extra is quite big
[06:10] <lotuspsychje> cq-aux: oh, you searching a text browser?
[06:10] <cq-aux> yeah man, I just want to try out surfraw by itself first
[06:11] <drakedouay> I bought a windows 8 pc, tried to format and it seems i bricked it. I am trying to install ubuntu now but cannot seem to get by this secure boot nonsenese
[06:11] <cq-aux> (I want to google define from cli)
[06:11] <lotuspsychje> cq-aux: try links2 instead mate
[06:11] <lotuspsychje> !info links2 | cq-aux
[06:11] <drakedouay> am i screwed, or what?
[06:11] <lotuspsychje> drakedouay: no mate, you need to finetune that uefi
[06:12] <lotuspsychje> drakedouay: disable secureboot and fastboot
[06:12] <lotuspsychje> !uefi | drakedouay
[06:12] <drakedouay> lotuspsychje: cannot boot to 8
[06:12] <lotuspsychje> drakedouay: the easiest way is to format your whole hd to ubuntu, no dualboot
[06:12] <lotuspsychje> drakedouay: dualboot with uefi is bit complex
[06:13] <Guest36107> hola
[06:13] <lotuspsychje> !es | Guest36107
[06:20] <cq-aux> drakedouay: are you dual-booting or completely ubuntu?
[06:21] <cq-aux> ok
[06:27] <Guest55942> ls
[06:27] <robby2k> hi
[06:27] <cq-aux> lynx -dump http://www.google.com/search?q=define+schedule | head -50 | less
[06:28] <lotuspsychje> robby2k: welcome
[06:28] <cq-aux> that seems to do it right
[06:28] <robby2k> i need steam help
[06:28] <lotuspsychje> !steam | robby2k
[06:28] <robby2k> ty
[06:29] <cq-aux> now (I'm using a commandlinefu.com example and I'm not sure about bash etc. syntax) I need to alias this
[06:29] <cq-aux> lynx -dump http://www.google.com/search?q=$@ | head -50 | less
[06:30] <cq-aux> or something similar, any ideas?
[06:30] <cq-aux> (I'm looking at the q=%@ and wondering if that means "what I type next"
[06:31] <lotuspsychje> cq-aux: whats your end goal exactly?
[06:31] <sar-> I installed 14.04 desktop with lvm  - However, I forgot to mount /boot upon install. How can I move it to a new partition (I have a sda1 ~500MB, set aside for this) - Coz I am getting http://askubuntu.com/questions/468466/why-this-occurs-error-diskfilter-writes-are-not-supported
[06:31] <cq-aux> google define sweepstakes
[06:32] <cq-aux> I just want to type $define sweepstakes
[06:33] <HerroWorlds> ubuntu people! anyone have any advice for what i want to do for a network drive setup? i want to connect 2-4 different 3.5 inch drives to a usb hub thats connected to router and use them all as separate network drives
[06:33] <cq-aux> funnily enough I probably want another search engine here because the dump includes alot of cookies
[06:34] <lotuspsychje> cq-aux: links2 has a -dump option, not sure how it works..
[06:34] <cq-aux> lotuspsychje: I'm running with lynx here
[06:35] <flwico> throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding
[06:35] <flwico> throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled
[06:35] <flwico> due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to
[06:35] <flwico> flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding
[06:35] <flwico> throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding
[06:35] <flwico> throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled
[06:35] <flwico> due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding throttled due to flooding
[06:35] <unopaste> flwico you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[06:35] <lotuspsychje> !ops | flwico
[06:35] <cfhowlett> !ops | unopaste
[06:35] <cfhowlett> unopaste, doh!  sorry
[06:36] <Flannel> Why do you guys hate the bots? :(
[06:36] <cq-aux> ty
[06:36] <sar-> Hi, I installed 14.04 desktop with lvm  - However, I forgot to mount /boot upon install. How can I move it to a new partition (I have a sda1 ~500MB, set aside for this) - Coz I am getting http://askubuntu.com/questions/468466/why-this-occurs-error-diskfilter-writes-are-not-supported
[06:36] <lotuspsychje> HerroWorlds: maybe the ##networking guys might help you?
[06:36] <lotuspsychje> !lvm | sar-
[06:37] <HerroWorlds> @ lotuspsychje tyvm
[06:39] <lotuspsychje> cq-aux: not many change they awake, but you could try the #lynx channel
[06:39] <sar-> lotuspsychje: Hi, I finally got the install working, it was the thumb drive. Anyway, I have lvm setup fine. just that i forgot to mount /dev/sda1 500mb ext4 partion as /boot during install. Now I want to move it from / which is in lvm to the dedicated partition.
[06:39] <lotuspsychje> !yay | sar-
[06:40] <cq-aux> oh that's cool, I'll just try out some alias(es) and get it going
[06:40] <cq-aux> ty
[06:43] <Guest27996> help i am getting this error while installing ntopng
[06:43] <Guest27996> nbox : Depends: apt-ntop but it is not going to be installed
[06:44] <lotuspsychje> Guest27996: what ddi you write as commandline to install?
[06:45] <Guest27996> lotuspsychje:  apt-get install pfring nprobe ntopng ntopng-data n2disk nbox
[06:46] <lotuspsychje> Guest27996: try sudo apt-get install ntopng
[06:48] <Guest27996> lotuspsychje : nope it did not work
[06:48] <Guest27996> is now says
[06:48] <Guest27996> Errors were encountered while processing:
[06:48] <Guest27996>  /var/cache/apt/archives/apt-ntop_2.1-263_all.deb
[06:49] <str4n63r> How to mount my data card in 14.04?
[06:49] <str4n63r> Huewai
[06:49] <lotuspsychje> !info apt-ntop
[06:49] <lotuspsychje> !info apt-ntop trusty
[06:50] <CodeA> problems with screen res?
[06:50] <lotuspsychje> Guest27996: where did you find this package?
[06:50] <lotuspsychje> !mount | str4n63r
[06:50] <Guest27996> lotuspsychje: http://www.nmon.net/apt-stable/
[06:51] <Guest27996> i am following this
[06:51] <lotuspsychje> !resolution | CodeA
[06:53] <str4n63r> ubottu: when I inserted the data card in my system, installation files are not visible to me
[06:53] <jake_> Why does Ubuntu's XORG reset whenever I log out or restart? Does Ubuntu think another user is brining in a different monitor? I don't mean to be a smartass... but WTH.
[06:53] <lotuspsychje> str4n63r: what card is this? sd card?
[06:54] <lotuspsychje> !xorg | jake_
[06:54] <str4n63r> lotuspsychje : no it's Huawei data card!!
[06:55] <jake_> I understand how to reset it, thank you. What I confused about is WHY Ubuntu feels the need to dump it constantly on log out or restart?
[06:55] <lotuspsychje> jake_: wich grafix card do you have and wich driver loaded?
[06:56] <jake_> Nvidia GeForce GTM 560 with : Nvidia proprietary driver 331.113
[06:56] <lotuspsychje> jake_: you know if your card is an optimus?
[06:58] <jake_> the website says "...and with Optimus support it also provides great batter life." So, I guess so.
[06:58] <lotuspsychje> jake_: then you need the nvidia-prime driver, might be the reason xorg is flipping on you
[06:59] <lotuspsychje> !info nvidia-prime | jake_
[06:59] <lotuspsychje> str4n63r: type of huawei usb?
[07:00] <jake_> synaptic says it's installed
[07:00] <lotuspsychje> jake_: can you check additional drivers section, what other drivers show
[07:02] <str4n63r> lotuspsychje  : Huawei mobile broadband E1731
[07:02] <lotuspsychje> jake_: maybe this can help you: http://askubuntu.com/questions/412452/getting-hybrid-graphics-to-work-nvidia-prime-gt650m
[07:03] <lotuspsychje> str4n63r: http://askubuntu.com/questions/316139/huawei-e1731-not-getting-detected-in-ubuntu-13-04
[07:03] <jake_> Nvidia binary/ version 331.113 from nvidia (Proprietary, test) ||| binary/ version 331.113 from nvidia-331-updates (proprietary) ||| legacy/ version 304.125 from nvidia-304-updates (propreitary) ||| binary/ version 304.125 from nvidia-304 (proprietary) ||| X.org X server
[07:06] <jake_> I uninstalled bumblebee, but already had prime installed. Maybe the two were fighting over the Xorg
[07:07] <lotuspsychje> jake_: thats possible indeed, bumblebee trigger is outdated
[07:08] <lotuspsychje> jake_: did you install ubuntu with cable on/ updates on?
[07:18] <RollinJ> l
[07:20] <linux> whazzz up
[07:45] <Hercules> hello ? how do I install openssl library on ubuntu with apt ( my ubuntu server version 14.04 x64 bit )
[08:01] <lasthopetm> Hey, im having a problem with my wireless disconnecting after about 10 min of use then not being able to reconnect. Im running 14.10 and using a TL-WN821N Wireless N300 USB Adapter. Anyone have any idea whats going on with it? :)
[08:03] <lotuspsychje> lasthopetm: can you pastebin sudo lshw -C network please?
[08:09] <lasthopetm> ok i have pastebin installed Im just trying to figure out how to use it real quick
[08:09] <lotuspsychje> !paste | lasthopetm
[08:10] <gioans> #ubuntu
[08:11] <gioans> hello
[08:16] <lasthopetm> http://paste.ubuntu.com/9577782/
[08:17] <lasthopetm> Sorry that took so long, still new with linux :)
[08:23] <lasthopetm> did I lose you lotus?
[08:24] <lotuspsychje> lasthopetm: you might wanna check relateks website for latest drivers
[08:24] <lotuspsychje> realtek
[08:24] <lasthopetm> ok will do, ill be back as soon check it out
[08:29] <gioans> hello
[08:30] <gioans> i am a new ubuntu
[08:31] <Canadee-i-o> :-D
[08:36] <robby2k> hi
[08:38] <robby2k> please link to steam ubuntu help room
[08:38] <Ben64> robby2k: #ubuntu-steam ... but whats the issue?
[08:39] <robby2k> after steam installation it doesnt start up
[08:39] <Ben64> robby2k: run it from command line, pastebin the output
[08:40] <robby2k> how?
[08:40] <Ben64> open terminal, type "steam"
[08:40] <robby2k> ok
[08:41] <robby2k> lot of output
[08:41] <robby2k> Steam needs to install these additional packages:
[08:41] <robby2k> 	libgl1-mesa-dri:i386, libgl1-mesa-glx:i386, libc6:i386
[08:41] <robby2k> [sudo] password for robby2k:
[08:43] <robby2k> its installing
[08:47] <robby2k> working now ty ben
[08:47] <robby2k> :)
[08:57] <lasthopetm> hey so everything ive seen points to not being able to solve the problem. But there is one last think I would like to try, do you have any expirence with ndiswrapper?
[08:58] <joseph> hi all
[08:58] <joseph> hi
[08:59] <joseph> whois
[08:59] <joseph> whois pranav
[09:00] <pranav> hi joseph
[09:00] <nso95> you forgot the / buddy
[09:00] <nso95> like this /whois nso95
[09:00] <joseph> hi pranav
[09:00] <joseph> how are u
[09:01] <pranav> great how are you ?
[09:01] <joseph> im good tnx
[09:01] <pranav> so whats up !
[09:02] <joseph> can u help me to learn linux pls
[09:02] <joseph> ntm and you
[09:03] <pranav> what do you want to learn in linux joseph ?
[09:03] <joseph> hacking security
[09:05] <pranav> well no one can teach you hacking security :D the one thing you can do is learn how the security works and try to find a loop hole :)
[09:06] <joseph> ok pranav thank you
[09:06] <pranav> sure joseph ! :)
[09:06] <joseph> ok
[09:16] <brent> im trying to get gedit running with root privileges.. sudo gedit gives: Failed to register: Timeout was reached
[09:16] <brent> ive since installed gksudo which works but isnt launching gedit either
[09:17] <brent> i know if i reboot the system, it will work but im currently not able to do so
[09:23] <gioans> hello
[09:23] <gioans> #ubuntu-chat
[09:31] <robby2k> hi
[09:31] <robby2k> how do i change my user account name
[09:32] <robby2k> from robby2k back to ablest1980
[09:34] <Seveas> robby2k: in Ubuntu or on irc?
[09:34] <gioans> robby2k: hello
[09:36] <robby2k> i got it
[09:36] <robby2k> ty
[09:36] <robby2k> for ubuntu
[09:36] <robby2k> bbl as ablest
[09:36] <robby2k> ablest1980
[09:40] <cq-aux> heya this might sound funny, but windows has FATsort - what do we have?
[09:41] <Ben64> cq-aux: no idea what that is
[09:41] <cq-aux> sorts the folders+files on a fat32 filesystem
[09:42] <Ben64> apparently ubuntu has it
[09:42] <Ben64> !info fatsort
[09:42] <cq-aux> !omgosh
[09:45] <KEEm> hello guys
[09:45] <KEEm> where are the file/folders located of software like hexchat?
[09:45] <Seveas> KEEm: all over the place. For a full list: dpkg -L hexchat
[09:46] <KEEm> thank you alot Seveas
[09:47] <MixieR> hello
[09:47] <Seveas> KEEm: http://knowyourmeme.com/memes/the-alot
[09:48] <KEEm> seveas: haha :D
[09:48] <KEEm> bye :)
[09:56] <nuf0xx> !info incinga
[09:56] <nuf0xx> wha?
[09:57] <ablest1980> hello
[09:57] <KEEm> hello
[09:57] <nuf0xx> o/
[09:58] <KEEm> Seveas: i can see the file location but not the channellogs location
[09:58] <ablest1980> how do i change my device name?
[09:58] <nuf0xx> for which device?
[09:58] <ablest1980> ablest1980@robby2k-HP-Pavilion-g6-Notebook-PC:~$
[09:59] <ablest1980> to ablest1980@ablest1980-HP-Pavilion-g6-Notebook-PC:~$
[09:59] <nuf0xx> thats in /etc/hosts or /etc/hostname
[09:59] <theadmin> Both
[09:59] <theadmin> ablest1980: sudo nano /etc/hostname, change it there. Then, similarily, sudo nano /etc/hosts and change it there too.
[09:59] <Ukari> when i use pidgin,i set it top everytime by my hand,how can i auto set a window top when i open it
[10:00] <shuvojit> anybody?
[10:00] <ablest1980> ok ty
[10:00] <shuvojit> anybody online?
[10:00] <nuf0xx> o/
[10:01] <shuvojit> i need some help.
[10:01] <theadmin> shuvojit: Sure, ask away
[10:01] <nuf0xx> dont ask for help, just ask your question
[10:01] <shuvojit> i had a 600gb fat32 partition mounted at dos/
[10:01] <ablest1980> how do i change it there and save it?
[10:02] <shuvojit> i used Gparted to format that space and change it to ntfs to use it as a shared drive.
[10:03] <shuvojit> now everytime i boot, i see an error that ubuntu cannot mount dos/ and i have to press "s" to skip it.
[10:03] <shuvojit> how can i fix it?
[10:03] <theadmin> ablest1980: It's just a text editor, change it like you normally would. To save, press Ctrl-O, to exit, press Ctrl-X
[10:03] <theadmin> shuvojit: Edit /etc/fstab and remove the partition from there.
[10:03] <shuvojit> thadmin: Thanks a lot.
[10:03] <shuvojit> *theadmin
[10:04] <ablest1980> ok
[10:05] <ablest1980> restart?
[10:06] <ablest1980> ablest1980@robby2k-HP-Pavilion-g6-Notebook-PC:~$ sudo nano /etc/hostname
[10:06] <ablest1980> [sudo] password for ablest1980:
[10:06] <ablest1980> ablest1980@robby2k-HP-Pavilion-g6-Notebook-PC:~$ sudo nano /etc/hosts
[10:06] <ablest1980> sudo: unable to resolve host HP-Pavilion-g6-Notebook-PC
[10:06] <ablest1980> ablest1980@robby2k-HP-Pavilion-g6-Notebook-PC:~$
[10:06] <Ben64> ablest1980: restart in recovery mode to fix that
[10:06] <ablest1980> how ?
[10:06] <Ben64> !recovery
[10:07] <ablest1980> f8?
[10:07] <Ben64> no... read the link
[10:07] <ablest1980> ok
[10:10] <nuf0xx> Ben64: lol
[10:47] <goliake> list
[10:47] <blocmario> hi people
[10:47] <blocmario> windows or ubuntu?
[10:55] <Sojaki> Depends on what you want to do. But clearly Ubuntu because you are asking in an Ubuntu channel :)
[11:01] <highbit045> Hello
[11:03] <batabatu>  Im trying to use a 3G modem with a raspberry pi. I can get it to connect using wvdial when the modem is connected to the pi via USB. However when I connect the modem via serial port it won't connect. I'm using identical settings except of course changed wvdialconf to use the serial port /dev/ttyAMA0 instead of /dev/ttyUSB2. Any suggestions?
[11:04] <batabatu> in both cases (USB and serial connection) I can send AT commands to the modem via minicom no problems
[11:13] <peppe_> irc://irc.darksin.it/licantropo
[11:14] <ubuntu-studio> hello
[11:22] <MasterPiece> ubottu, install
[11:22] <MasterPiece> ubottu, bot
[11:29] <Smokie> hey guys, i have a remote server running ubuntu, i want to test and install something, but if it messes up i would like to revert back to where i was
[11:29] <Smokie> is there a way to make a full backup of a running system by any chance?
[11:30] <cfhowlett> !backup | Smokie
[11:34] <Smokie> cfhowlett, which method do you use?
[11:35] <BlackHornet> Hi all, Is one able to run the Gnome desktop in 14.04 and bypass Unity?
[11:35] <m1dnight_> guys, I want to check if a line contains "foo" from an output so I'm trying to use pipes but it doesnt raelly work
[11:35] <cfhowlett> Smokie, as the system can be reproduced, I just backup my data.   I'm in China and dropbox is blocked again.  I use 16 GB USB's
[11:35] <m1dnight_> df | grep -qs "storage"
[11:35] <m1dnight_> the line is there (the line contains /media/storage)
[11:35] <m1dnight_> what am I doing wrong?
[11:37] <Smokie> cfhowlett, only the data in your /home directory?
[11:37] <cfhowlett> Smokie, that's the important stuff.  YMMV
[11:38] <Smokie> cfhowlett, what about modifications to the system itself? you do everything again with a fresh install?
[11:38] <cfhowlett> Smokie, I do.  However, since I only run LTS, I only install every 2 years.
[11:59] <BlackHornet> Is one able to run the Gnome desktop in 14.04 and remove unity?
[11:59] <bazhang> install gnome-shell BlackHornet
[12:00] <bazhang> no real need to remove unity, unless you are extremely tight on space
[12:02] <BlackHornet> bazhang: And it will work without a hitch?
[12:02] <foxnet> hi all, I am trying to change my default game install location inside steam but I get the message that the new folder location must have execution permission. How do I make this work?
[12:03] <bazhang> BlackHornet, depending on the extensions you install, sure
[12:03] <bazhang> !steam | foxnet
[12:04] <foxnet> thnx
[12:04] <BlackHornet> bazhang: Okay, thanks for the help.
[12:04] <foxnet> join #ubuntu-steam
[12:04] <Michelangelo3589> ciao
[12:04] <bazhang> welcome
[12:10] <brent> im pulling out my hair trying to get a windows machine to connect to openssh running on ubuntu 14.04
[12:10] <brent> i can connect using PasswordAuthentication yes, but when i do PasswordAuthentication no its failing
[12:10] <brent> obviously an issue with keys/permissions
[12:11] <brent> i have no idea where to start :(
[12:17] <Flonk> I wanted to install mysql-server, but something somewhere went wrong. The prompt to enter the root password comes up, then it tells me that the password can't be set, then the setup just hangs.
[12:17] <Flonk> So i apt-get purge mysql*, autoremove, autoclean, and reinstall, but the same thing still occurs.
[12:17] <vekin> trying to install lirc in 14.0.4 and the post install phase is hanging at Setting up setserial (2.17-48) ... \ Saving state of known serial devices...
[12:17] <Flonk> Any ideas?
[12:22] <brent> Flonk, how are you installing
[12:22] <Flonk> brent: apt-get install mysql-server
[12:23] <brent> ubuntu 14.04?
[12:23] <Flonk> Yup :)
[12:23] <Flonk> I went for a rather radical `find -name "mysql" | xargs rm -rf` now and will try again
[12:24] <vekin> i can't install anything because dpkg --configure -a hangs
[12:25] <Prezident> ow guys i did a mistake, i did chmod 700 / , now i dont have permission for anything like sudo etc, anything i can do?
[12:25] <vekin> Prezident: have a backup? lol
[12:25] <brent> Flonk, check mysql -v
[12:26] <Giwrgaras> can anyone help me with this piece of shit?!
[12:26] <Flonk> brent: purged the package, just a sec
[12:27] <bazhang> no cursing here please Giwrgaras
[12:27] <OerHeks> Prezident, backup your data and reinstall ?
[12:27] <Giwrgaras> i try to copy some files in to my usr/lib folder with the command sudo nautilus and then i copy it. The files are there but when i try to open them with my sublime text the files are empty.
[12:27] <Prezident> bah uptime is over 400 days
[12:28] <Giwrgaras> the files are only visible with a sudo nautilus window which it means i cant import them with my python
[12:28] <Giwrgaras> what is going on here please?!
[12:29] <OerHeks> Giwrgaras, sounds like you try to use systemfiles as user, why would you do that?
[12:30] <Flonk> brent: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
[12:30] <Giwrgaras> my python path is located on /usr/bin/python2.7 on my anaconda. There are my modules. I try to copy some modules there but i can do it only with sudo command
[12:31] <Giwrgaras> i did that before with some other modules that i have it worked but on this one its stubborn and while i copy them they are blanc when i open them without nautilus
[12:34] <dmtk_>  /msg NickServ VERIFY REGISTER dmtk qxedksyqbfbe
[12:38] <Giwrgaras> fuck it going back to windows
[12:46] <wizzy__> Hi. I have a problem with Ubuntu 14.10 on my Laptop. X freezez every 2-3 minute, where i have to ctrl+alt+f1 and then ctrl+alt+f7 to get back. How do i solve that
[12:47] <vekin> how do i get rid of a package that is hanging on configure?
[12:47] <auronandace> wizzy__: find out if there are different graphics drivers you can use
[12:48] <vekin> i can't apt remove lirc
[12:48] <Seveas> vekin: dpkg -P
[12:48] <vekin> ah k
[12:49] <wizzy__> There isn't really any alternative to nvidias drivers
[12:49] <yorwos> hi every1 , i just noticed a weird thing , if i load skype and quit , some times i find the process running even after , this isnt normal is it ?
[12:50] <SCHAAP137> i had that too, quitting doesnt kill the process all the time yorwos, it's a skype thing
[12:50] <yorwos> aha , so they could be watching us uh ?
[12:50] <yorwos> like stealing cookies or something ?
[12:50] <auronandace> wizzy__: does the same happen when you use the nouveaux drivers?
[12:50] <SCHAAP137> in skype they sure are
[12:50] <yorwos> thanx schaap137
[12:50] <EriC^^> NSA runs skype
[12:52] <MeChat> hello
[12:52] <vekin> man.. ntfs-3g hangs the same way lirc does on "Saving state of known serial devices..."
[12:52] <vekin> im starting to think it wasn't a problem with the package
[12:52] <yorwos> do u have an alternative messenger to purpose to me ?
[12:52] <yorwos> propose-*
[12:53] <wizzy__> auronandace: there is so many display errors on the screen when trying to use Nouveau, that i won't have a chance to know if it's working or not
[12:53] <wizzy__> :(
[12:53] <SCHAAP137> yorwos: Pidgin
[12:53] <yorwos> thanx schaap137
[12:53] <yorwos> u guyz r the best
[12:53] <SCHAAP137> np
[12:55] <wizzy__> Linux is only free if your time has no value. Wise words.
[12:55] <auronandace> wizzy__: i'm guessing you must have a very new nvidia card? are you using bumblebee?
[12:55] <Prezident> Not needed reinstall, used livediska and connected to root promt
[12:55] <Prezident> chmod 755 /, problem solved
[12:55] <Prezident> dont give such tips to reinstall and shit when its easy fixes.
[12:56] <auronandace> Prezident: you will likely find using chmod on / will cause all sorts of problems
[12:57] <Prezident> yes thats for sure
[12:57] <Prezident> but to restore it was easy
[12:57] <Prezident> Aslong you got the box at home, at vps its harder i belive
[12:58] <OerHeks> Prezident, 755 is not valid for all folders in /
[12:58] <Prezident> What is valid?
[12:59] <EriC^^> Prezident: there's no one size fits all here
[12:59] <EriC^^> Prezident: the sane thing to do would be to reinstall
[12:59] <EriC^^> Prezident: the sadistic approach would be to reinstall all packages and hand fix configs and other files
[13:03] <cristian_> hola
[13:06] <ribasushi> A couple of days ago I found a root cause of a problem. As a good netizen I left answers around the web for a similar question. The answer to http://askubuntu.com/questions/456175/logitech-c920-webcam-on-ubuntu-14-04-hesitates-chops-every-3-seconds was deleted by a moderator yesterday: http://i.imgur.com/2MeWyze.png. I think this is (no polite word in my vocabulary). Dropping link here if someone cares to fix the answer.
[13:07] <ribasushi> cheers & :)
[13:11] <OerHeks> ribasushi, this is the 'root' of the reason why it is removed, http://sourgeforce.net/p/linux-uvc/mailman/message/33164469/ is dead ?
[13:12] <OerHeks> good thing moderators check urls
[13:13] <ribasushi> OerHeks: you got the wrong domain: the link is http://sourceforge.net/p/linux-uvc/mailman/message/33164469/
[13:14] <OerHeks> oops i see my bad, i made a typo
[13:15] <ribasushi> I don't care either way at this point, I did my part. Just figured someone with less zealotry may want to fix the delete ;)
[13:15] <Ben64> ribasushi: did you even look at the reason it was deleted
[13:16] <ribasushi> I did, I find the reason (again, no polite words to express it)
[13:16] <Ben64> ribasushi: it makes a lot of sense, deal with it, post the actual answer instead of a link, and don't come to #ubuntu to complain about it
[13:17] <ribasushi> I am not complaining about it, I am being constructive
[13:17] <Ben64> ribasushi: you're really not
[13:17] <ribasushi> shrug, fair enough
[13:17] <Ben64> spend the time fixing your post instead of complaining, would be done already
[13:18] <dinosaur> Do you recommend an open-source alternative for DirectAdmin which is proven to work well with Ubuntu Server?
[13:19] <dinosaur> ebox
[13:20] <Ben64> zentyal?
[13:22] <BluesKaj_> Hiyas all
[13:29] <Shadow}}> A Ubuntu Live-CD can be burnt onto a CD-R,Right?
[13:29] <Shadow}}> Only ever used DVDs...
[13:29] <Daekdroom> Shadow}}, The Live"CD" no longer fits into a CD.
[13:30] <Shadow}}> Oh right. So, How bout my USB Drive. How much is the file(s)?
[13:30] <BluesKaj_> yeah it's a misnomer, should be called live dvd
[13:30] <BluesKaj_> about 1.1.G
[13:30] <Daekdroom> !liveUSB
[13:31] <Shadow}}> Oh.. So DVDs still work just 1.1+'s?
[13:31] <Daekdroom> "a 2 GB USB flash device/drive/stick. If the iso file is smaller than 1 GB, it is possible to use a 1 GB USB device, at least with some of the methods. "
[13:31] <Daekdroom> Yes. A DVD would still work.
[13:32] <Shadow}}> What do you call the language Ubuntu uses?
[13:32] <dinosaur> what language?
[13:32] <Shadow}}> Eh... Linux.
[13:32] <Seveas> Shadow}}: english :-)
[13:33] <Shadow}}> Its coding. o.o
[13:33] <Seveas> Shadow}}: you mean a programming language?
[13:33] <Shadow}}> Yes.
[13:34] <Seveas> there is no 'the language', you can find software written in a multitude of languages in Ubuntu
[13:34] <Daekdroom> There are several different components to a Linux distribution.
[13:35] <Shadow}}> Yep. Lost me.
[13:35] <Daekdroom> Each component use a different language / combination.
[13:35] <Shadow}}> Ah.
[13:35] <aubuntu> HI there any one here know how to make a robot clock like "clocky" , i want to make it as my hgh school project , and i need some info ,I searched in google but i didnt find any topic talking about how clocky is working and what i need to make one  PLEASE HELP!!!
[13:36] <Shadow}}> aubuntu: If you know who "'clocky" is, Can't you find "clocky" on google and find its information to then paste into google?
[13:36] <Seveas> aubuntu: that's *very* ambitious for a high school project, I suggest finding something that's not quite as advanced
[13:37] <Seveas> aubuntu: but something with a raspberry pi, a simple LED display, some motors and a 3d printer for making the parts should go a long way. Of course then you need to learn how to control all these things :-)
[13:38] <Shadow}}> ^3D Printer. 'Nough said.
[13:40] <MMukherjee> https://pastee.org/em5gq
[13:40] <Shadow}}> So... I want a VPN. But I failed horribly at creating one by command lines, Is there not a free VPN /program,application,ect/?
[13:40] <MMukherjee> Password: 'wooyeah'
[13:40] <MMukherjee> Why is it giving this error
[13:41] <Seveas> MMukherjee: you need to enable the 'universe' repo
[13:41] <Shadow}}> OR a Dumbed down more... Step by Step without assumption of my knowing ANYTHING to setting a VPN up by command lines?
[13:42] <Seveas> Shadow}}: do you need to connect to an existing vpn, or do you want to create a vpn between two networks?
[13:42] <Shadow}}> Seveas: I simply want my IP to stop showing...
[13:42] <ObrienDave> Shadow}}, try VPNbook
[13:43] <ObrienDave> free
[13:43] <Seveas> Shadow}}: for what purpose?
[13:44] <Shadow}}> Seveas: I used to have alot of hacker problems.
[13:45] <Seveas> Shadow}}: http://knowyourmeme.com/memes/the-alot
[13:45] <Seveas> Shadow}}: hiding your IP is just papering over the problems, you should secure your system.
[13:45] <Shadow}}> Seveas: As in, Calls at 1AM you answer only to hear dial-up tones,hackers.
[13:46] <Seveas> hmm, interesting definition of 'hackers'...
[13:46] <MMukherjee> How to?
[13:47] <Shadow}}> ..As in re-burn the disc in your drive to a copy of wind0ws with a special Eula stating I'd owed them 5 dollars per month after in-stallion or aborting after reading the agreement. THAT was kinda funny..
[13:48] <Seveas> MMukherjee: same way as you disabled it, but in reverse :)
[13:48] <MMukherjee> Well, I think I didn't.
[13:48] <MMukherjee> I generated one from here: http://repogen.simplylinux.ch/index.php
[13:49] <MMukherjee> Oh..
[13:49] <MMukherjee> Found it
[13:49] <MMukherjee> Gotta make a new one
[13:49] <Seveas> MMukherjee: ooh, that's a recipe for disaster
[13:49] <Seveas> try this instead http://askubuntu.com/a/148653/945
[13:49] <MMukherjee> lolwut
[13:50] <Seveas> most repos in that generator are utter rubbish
[13:50] <MMukherjee> It's a CUI-only sys.
[13:50] <MMukherjee> It's minimal
[13:50] <MMukherjee> And I use it as a server
[13:50] <Seveas> then edit /etc/apt/sources.list manually, and remove all 3rd party crap
[13:51] <Shadow}}> Hey Seveas are there any other Repos I should add? Other than universe and all the listed cannonicals that are relative?
[13:51] <MMukherjee> ok
[13:52] <Seveas> Shadow}}: unless you know what you're doing, use only the default ones.
[13:52] <KlausedSource> hello
[13:53] <KlausedSource> how do i redirect output of a command line tool so that it echoes it to a file?
[13:53] <Seveas> KlausedSource: with the > thingy
[13:53] <theadmin> KlausedSource: command | tee file
[13:53] <Seveas> example: ls -la > output.txt
[13:53] <theadmin> KlausedSource: Or you can use >, but it's less consistent and doesn't work with sudo
[13:53] <Seveas> theadmin: neither does | tee
[13:54] <theadmin> Seveas: It does, if you do it appropriately: command | sudo tee
[13:54] <Seveas> fair enough
[13:54] <Shadow}}> Seveas: Is there no longer a dist-upgrade line?
[13:54] <Seveas> Shadow}}: not sure what you mean
[13:54] <Shadow}}> or is it cause i'm on LTS..
[13:55] <Shadow}}> I used to use "apt-get update -y && apt-get upgrade -y && apt-get dist-upgrade -y && apt-get autoremove -y"
[13:57] <Seveas> except fot the autoremove, that's sane
[13:57] <Seveas> I'd run that one without -y in case it wants to remove something I want to keep
[13:58] <Shadow}}> I don't know if I want to keep any of it, So I just use -y anyway..
[13:59] <Shadow}}> I know its not Ubuntu but I'd like to ask if anyone knows a /user friendly/ Puppy Linux OS?
[14:00] <Shadow}}> Or actually scratch that, Didn't I see a new Ubuntu??
[14:00] <freeroute> does anyone have some good guides of installing Ubuntu minimal?
[14:00] <bazhang> Shadow}}, ask in ##linux
[14:00] <bazhang> !mini
[14:01] <ChrisP1948> So far, knock on wood' the update to kernel version 3.14 has corrected the issue I was having with a black screen and mouse cursor only being non-responsive. I assume I need to check here periodically http://kernel.ubuntu.com/~kernel-ppa/mainline/ to see if there are newer versions for Trusty?
[14:01] <keithclark> I have a dedicated server that I'd like to turn into a media server, any help with this?
[14:01] <freeroute> bazhang: I already know that resource. I was more wondering if there were any step-by-step guides available done by the community.
[14:02] <bazhang> freeroute, not to my knowledge
[14:02] <freeroute> all right, in that case I'll share it here once I come across them
[14:02] <bazhang> freeroute, done by trhe communitry that is, the web surely has some
[14:02] <ChrisP1948> I see that there is a v3.15-rc2-trusty/ release candidate dated April of this year but no actual release of the 3.15
[14:15] <ablest1980> hi
[14:15] <aeoril> ablest1980 hi
[14:15] <ablest1980> some one link the unbuntu offtopic room
[14:16] <ablest1980> hi aeoril
[14:16] <freeroute> !offtopic
[14:16] <freeroute> ablest1980: ^
[14:16] <ablest1980> ty
[14:16] <ablest1980> :)
[14:16] <freeroute> np
[14:17] <freeroute> is there any way to partition LVM during Ubuntu Minimal installation?
[14:35] <king_> where
[14:35] <king_> hello
[14:58] <strictlyb> has there been a deb released for the ntp exploit?
[15:04] <OerHeks> strictlyb, likely not, and ubuntu does not provide such debs, nor support.
[15:06] <strictlyb> i did not mean specifically i meant has anyone seen a relased deb for the ntp fix from which ever repo upstream it may be
[15:07] <OerHeks> strictlyb, oh that is an other question, NTP fix instead of NTP exploit
[15:08] <strictlyb> sorry i mnust of not said that right
[15:08] <strictlyb> obviously i thought it infered what i meant ;) my apologies
[15:08] <OerHeks> no problem, i am searching now
[15:09] <strictlyb> thanks im looking too
[15:09] <OerHeks> which one? https://bugs.launchpad.net/ubuntu/+source/ntp/+bugs?field.status:list=NEW
[15:10] <strictlyb> for others https://isc.sans.edu/diary/Critical+%23NTP+Vulnerability+in+ntpd+prior+to+4.2.8/19093
[15:10] <strictlyb> i think 4.2.6 is not fixed
[15:10] <strictlyb> per http://arstechnica.com/security/2014/12/attack-code-exploiting-critical-bugs-in-net-time-sync-puts-servers-at-risk/
[15:12] <blackangelpr> guys i cant fix W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 6000000000  with http://askubuntu.com/questions/308760/w-gpg-error-http-ppa-launchpad-net-precise-release-the-following-signatures give me error  the one show here its no my key i put 000 just in case XD
[15:12] <OerHeks> that isc.sans url says: A few Ubuntu system ... do not seem to use autokey.
[15:12] <strictlyb> 12.04? does it do you know off hand?
[15:13] <OerHeks> strictlyb, i see no cve-2014-9295 on http://people.canonical.com/~kernel/cve/pkg/ALL-linux.html
[15:13] <blackangelpr> 14.04.1 lts
[15:16] <Dead_OR_Alive> Yeah
[15:17] <OerHeks> strictlyb, http://www.kb.cert.org/vuls/id/852879 says linux unknow
[15:20] <Guest86945> ok thanks
[15:22] <areolla> Good Morning.
[15:22] <bazhang> hi
[15:23] <OerHeks> hi areolla
[15:23] <areolla> Thanks guys. Son groundednow :)
[15:26] <blackangelpr> found my answer for my problem with gpg on update http://askubuntu.com/questions/13065/how-do-i-fix-the-gpg-error-no-pubkey   seccond post works!
[15:26] <MDT[OnTheGo]> hello
[15:26] <mjayk> hi
[15:27] <MDT[OnTheGo]> is ther a program that will always show the bandwidth it is using at the moment?
[15:30] <blackangelpr> MDT[OnTheGo],  may be this helps? https://apps.ubuntu.com/cat/applications/precise/download-monitor/
[15:32] <MDT[OnTheGo]> blackangelpr, There isn’t a software package called “download-monitor” in your current software sources.
[15:32] <blackangelpr> let me see
[15:32] <OerHeks> !info indicator-multiload
[15:33] <blackangelpr> MDT[OnTheGo],  : (  seems its pulled out but here its a ppa not the best elegan solution http://www.webupd8.org/2012/07/monitor-network-usage-with-download.html
[15:34] <Jeevan> Hello all i am new to this group and for this OS
[15:34] <Jeevan> i need some help
[15:34] <blackangelpr> Hi there Jeevan  just ask  :)
[15:34] <MDT[OnTheGo]> thx OerHeks
[15:34] <MDT[OnTheGo]> that perfect!
[15:35] <Jeevan>  i am using peppermint os in my note
[15:35] <Jeevan> which is installed by my friend
[15:35] <blackangelpr> !ubuntu
[15:35] <Jeevan>  i want to change hostname , admin name and credentials
[15:35] <Jeevan> i added user with my name  and granted admin access
[15:36] <cyberace_> hi guys
[15:36] <cyberace_> how are ya doing
[15:36] <cyberace_> I need some help
[15:37] <cyberace_> having problems with my IP address
[15:37] <aeoril> cyberace_ what are the symptoms specifically?
[15:38] <cyberace_> xchat will not let me mask my ip
[15:38] <cyberace_> this is a big concern
[15:38] <cyberace_> i switch up to Mirc using wine
[15:38] <cyberace_> but the /mode username -x feature is not working
[15:39] <blackyboy> Hi any one used icinga ? How can i add my client machines with icinga server ? Did i want to install nrpe package in both client and server machines ? Now i have installed icinga2 and its working fine only localhost as now under monitoring, I want to add some of the live production Servers to icinga now
[15:42] <pip__> hi everybody.  How do I copy my efi partition to keep it as a backup?
[15:42] <Hw2k> What would be a good way in a bash script to check if "echo db.system.users.find({ user: "someuser" }) | mongo admin | grep "someuser"" returns anything? just having it inside if [ -n ] seems to fail because the echo part is just empty. Sorry if I can't explain properly, but I'm a bit out of my depth :)
[15:44] <cyberace_> Can some1 help me setup mIRC via WINE?
[15:48] <db> hi. I'm trying to set the resolution of my framebuffer text console on ubuntu 14.04. I tried various stuff I found on the web regarding modifying GRUB_GFXMODE and ..GFXPAYLOAD in the grub configuration to no avail.
[15:49] <EriC^^> pip__: dd if =/dev/sdxY of=/path/to/efibackup.img conv=sync,notrunc,noerror
[15:49] <EriC^^> db: what res do you want?
[15:49] <db> Now if I run fbset -i on the console, it always shows 1280x1024, no matter what. I wonder where the available resolutions there are defined (/etc/fb.modes?) and how can I change it?
[15:49] <db> EriC^^: the native res of my monitor would be 1280x800 (i'ts a strange small one)
[15:50] <pip__> EriC^^: thanks very much
[15:50] <db> EriC^^: but actually I would be fine with anything I can read, cause 1280x1024 just doesn't display properly on that small screen
[15:50] <db> 800x600 would be ok
[15:51] <pip__> EriC^^ what does the conv=sync,notrunc,noerror line do?
[15:51] <EriC^^> db: you can get 1280x1024 if you add vga=795 to the kernel line
[15:51] <ThePendulum> Is there a quick way to figure out what on an Ubuntu machine is occupying a port?
[15:52] <db> EriC^^: it says that the vga=xxx settings are not supported any more in grub2
[15:52] <db> EriC^^: although there might be a workaround
[15:52] <EriC^^> db: they still work
[15:52] <strictlyb> lsof -i :port#
[15:52] <db> ok wait.
[15:52] <strictlyb> @ThePendulum 	lsof -i :port#
[15:52] <strictlyb> example port 80 would be
[15:52] <strictlyb> 	lsof -i :80
[15:54] <EriC^^> pip__: noerror continues if there's an error, sync let's it sync the blocks in case there was an error it writes a zero so the partitions stay in sync as for notrunc it's needed when you copy the partition
[15:54] <ThePendulum> strictlyb: cheers!
[15:54] <ShRP_> disconnect
[15:54] <pip__> EriC^^ you, sir are  a star.  Thank you very much
[15:55] <db> EriC^^: grub itself shows up in that resolution, but then the screen flickers and it goes to a 1280x1024 fb text console.
[15:56] <EriC^^> db: i think you need to set the GRUB_GFX_PAYLOAD ( sp? ) to keep instead of none to something else
[15:56] <EriC^^> db: so it passes it over to the kernel
[15:56] <EriC^^> *or
[15:57] <db> I had tried that though.. I've been trying to fix this for the last two hours, it's really weird. I'll try again though, thanks
[15:59] <EriC^^> db: you tried to set it to "keep" & used vga=<number> ?
[15:59] <EriC^^> ( together )
[15:59] <db> both together.. i'm not sure.
[15:59] <Lorcatar> Hi, how can I switch caps and control? Thanks. btw girl coder here
[16:00] <EriC^^> you have to use them together otherwise grub won't pass the vga=795 to the kernel
[16:00] <digitsm> Hello, I have xubuntu installed on a btrfs filesystem. Now my btrfs partition has got filled up. How could I know what files/snapshots has used the most space?
[16:00] <EriC^^> db: set GRUB_GFXPAYLOAD_LINUX to keep
[16:00] <db> it somehow looks as it would work in the begining, you know? boot messages initially show up in the proper resolution, then suddenly it switches to that 1280x1024 framebuffer display and shows the login prompt. maybe i have something not grub-related going on?
[16:02] <db> now it briefly displayed "vga=xxx is deprecated, use gfx_payload=keep" or something (only saw it for a split second)
[16:02] <rrr> is there a way to continue downloading where is left after network disconnection?
[16:03] <db> brb
[16:03] <blackangelpr> rrr, on ubuntu software center look for Steadyflow Download Manager hope it help
[16:04] <vekin> rrr: wget -c
[16:05] <digitsm> Anybody is familiar with getting sizes used in btrfs?
[16:09] <vekin> digitsm: btrfs filesystem show
[16:09] <bewees> how do I run mkinitramfs in ubuntu? in archlinux I have to just do mkinitcpio -p linux
[16:11] <bewees> (converted ext4 to btrfs)
[16:11] <Jeevan> hello
[16:11] <Jeevan>  what is the minimum disk space required to install ubuntu server gui 14.04
[16:12] <compdoc> I think less than 20G
[16:12] <bewees> I think in ubuntu I need update-initramfs -u -k all for it :S
[16:13] <shibboleth> https://ics-cert.us-cert.gov/advisories/ICSA-14-353-01 <--- who is maintaining the ntp packages?
[16:13] <timothy_> hello
[16:13] <compdoc> ubuntu server with the Mate desktop:    /dev/sda1        40G  3.6G   34G  10% / (root)
[16:13] <lakcaj__> bewees, isn't there a mkinitramfs in the initramfs-tools package?
[16:13] <compdoc> 3.6G used
[16:14] <KlausedSource> any of you have a cubieboard4?
[16:14] <clearcut> im starting to get a lot of these websites from my clients, so im thinking to start reseller hosting - what are the best options for resellers in your expirience if you had any?
[16:15] <shibboleth> https://ics-cert.us-cert.gov/advisories/ICSA-14-353-01 <--- ubuntu does not have an apparmor profile for ntpd so this is baad
[16:19] <BlitzHere> My computer keeps freezing after a few minutes of use
[16:19] <BlitzHere> http://paste.ubuntu.com/9581114/
[16:20] <bewees> lakcaj__, Don't know which package mkinitramfs belongs to
[16:21] <bewees> lakcaj__, Oh, I meant how do I use it to regenerate my initramfs. I didn't mean where I find it :)
[16:21] <clearcut> i have like 7000 quotes - i want to create fast search so that when user types in keyword he gets near-live search and filtering - what is the bes option for this fast searching and getting the results, mongodb/map-reduce / elastic search?
[16:24] <Pa^2> clearcut, that is hitting a mouse with a sledgehammer.  Postgresql and the "x is like y" criteria will do well.
[16:24] <Pa^2> How big are these quotes?
[16:25] <Pa^2> Multi-page documents?
[16:25] <clearcut> lets say  30 words - up to 500 characters on average
[16:25] <clearcut> its a single sentance
[16:26] <Pa^2> You mean like sayings and such... yeah, postgresql or mysql have large string types
[16:43] <skypce> hello all
[16:43] <skypce> do you can help me with my buggy code please?
[16:43] <skypce> http://pastebin.com/ec0AKfuW
[16:43] <skypce> i want show the logout... dialog
[16:43] <skypce> but logout_command start before show the dialog
[16:43] <skypce> work , but buggy
[16:43] <scidb> Hi there
[16:43] <zerothis> I may have compile my kernel with the wrong sound and wireless drivers. Installed the generic kernel but how can I test t be sure my system is using it (I think its still using my custom kernel)
[16:43] <scidb> 中文
[16:43] <OnkelTem> Hi all
[16:43] <Jeaton> i have about 4 or 5 different versions of ubuntu spreaded across two hdd, maybe 8 different partitions
[16:43] <scidb> It's my first time using irc :)
[16:43] <Jeaton> how do I see which partitions im currently using?
[16:43] <OnkelTem> Suddenly sound disappeared in Chrome - both in Flash and in HTML video/audio. Any ideas? Ubuntu 12.04. Chrome latest stable.
[16:43] <Pa^2> scidb, that's easy for you to say.
[16:43] <scidb> @Pa^2,what do u mean
[16:43] <zerothis> scidb: オフトピック、ちょうどあなたの質問をする
[16:43] <scidb> zerothis: I don't know Japanese
[16:43] <BlitzHere> Another freeze. It recovered from this freeze though
[16:43] <BlitzHere> http://paste.ubuntu.com/9581243/
[16:43] <unopaste> skypce you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[16:44] <KlausedSource> what is the NSA doing to freenode? is this normal?
[16:48]  * LeoSevilla_ Saliendo, bye!
[16:51] <NCS_One> hi
[16:51] <stoogenmeyer> Hi, I have a docker question (tried at#docker, quiet there right now) currently before I call docker run I source a file containing my environmental variables. I then supply them to the docker command one by one with -e. I would like to be able to use --env-file and supply the file instead, but am running into a problem where the first line does not resolve as it normally should under a normal sourcing operation. here is a similar 
[16:51] <NCS_One> I have a laptop that boots to a "initramfs" console, what can I do to fix it?
[16:54] <bencc> how can I turn off the Ctrl+M keybinding = Enter?
[17:02] <landau> hello I need a python module for ubuntu 12.04, the glob2, because I have this error :ImportError: No module named glob2. How to install it?
[17:03] <blackangelpr> anyone else that use multiple country times see it at 24hr format instead of the 12hr ? even if selected?
[17:05] <landau> please could you help me?
[17:06] <Tanner> hello
[17:06] <Guest13185> I'm having some issues running sound on ubuntu 14.10 and have googled everything I could about it but to no avail
[17:07] <Seveas> landau: that module is not shipped by Ubuntu. It's easiest to install with pip: sudo apt-get install python-pip && sudod pip install glob2
[17:07] <blackangelpr> landau, http://askubuntu.com/questions/95037/what-is-the-best-way-to-install-python-packages
[17:07] <landau> ohh thanks!! I'll thy that!
[17:08] <TannerPaaltomo> can anyone give me a pointer about the sound issue in 14.10? it all of a sudden started to play on both speakers and headphones then stopped playing any sound at all after i tried a fix
[17:08] <Paul2> hello, what's happened to the ubuntu windows installer? I can't find a download link for it anymore
[17:09] <Seveas> Paul2: it was discontinued.
[17:09] <Paul2> Oh, why? It was the easiest way to install ubuntu!
[17:09] <blackangelpr> wubi?
[17:09] <Paul2> Yeah, that was it
[17:09] <Seveas> Paul2: but the endresult was ugly and unsupportable
[17:09] <Paul2> Do any devratives or other distros use it?
[17:10] <Paul2> The end result was brilliant as a user
[17:10] <blackangelpr> hum i make a usb recently and still have it but i heard that it was going to be removed no point of using it
[17:10] <blackangelpr> boot a live usb
[17:10] <blackangelpr> dont know Paul2  sorry
[17:10] <Seveas> Paul2: no, nobody uses it anymore
[17:10] <Paul2> Yeah cba with that. That means finding a usb, backing up whatever is on it, imaging it, sorting out booting from usb etc...
[17:10] <Paul2> THat's a shame :(
[17:11] <Seveas> http://en.wikipedia.org/wiki/Wubi_(software)
[17:11] <blackangelpr> Paul2, if you are using windows you can use this http://www.linuxliveusb.com/ to create a live usb its very dam easy :)
[17:11] <TannerPaaltomo> anyone have any tips about this sound issue? It's not even showing up in the top right anymore :c
[17:11] <TannerPaaltomo> makes me sad
[17:12] <TannerPaaltomo> will give spacebucks to whoever can fix this issue for me
[17:12]  * TannerPaaltomo waves around spacebucks
[17:12] <blackangelpr> TannerPaaltomo, please follow the instructions here http://askubuntu.com/questions/457619/sound-not-working-in-ubuntu-14-04
[17:13] <TannerPaaltomo> thanks blackangelpr i shall try that :)
[17:13] <Paul2> blackangelpr: yeah but then disk partitioning, faff and hassle. sadface.jpg. oh well thanks for letting me know
[17:13] <etzerd> hello all
[17:14] <shiggity> for hello all
[17:15] <aguitel> how vlc cast video to cheomecast ?
[17:15] <shiggity> for those of you in #kubuntu I apologize for this repeat msg, but:
[17:15] <shiggity>  I'm trying to boot Kubuntu 14.10 on my BayTrail tablet, with a custom 32bit UEFI Grub elf, and I got it booting to the initramfs (if I don't set such it yells about not liking the root fs and it kernel panics)
[17:15] <shiggity> What would I need to type to boot into the GUI installer?
[17:17] <TannerPaaltomo> blackangelpr, unfortunately that did not work :c
[17:18] <shiggity> anyone?
[17:19] <blackangelpr> TannerPaaltomo, http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/   step by step
[17:19] <blackangelpr> hope it works
[17:19] <TannerPaaltomo> thanks, i'll try that next
[17:19] <TannerPaaltomo> me too :)
[17:19] <shiggity> blackangelpr, can you help?
[17:19] <db> thanks guys & cya
[17:20] <ChrisP1948> Does anyone know what the latest 3.14 kernel is for Trusty? I'm currently running kernel 3.14.0-031400-generic
[17:20] <blackangelpr> shiggity, i do not use kubuntu not sure if startx or something else
[17:21] <shiggity> blackangelpr, yeah startx doesn't exist
[17:21] <shiggity> >_>
[17:21] <pressure679>  /msg Nickserv identify 1234qwer
[17:22] <pressure679> damn
[17:22] <pressure679> No one saw that.
[17:22] <shiggity> Ahahahah
[17:22] <shiggity> I did :P
[17:22]  * shiggity hacks
[17:22] <DarthTetris>  /msg Nickserv identify thisisnotmypassword
[17:22] <DarthTetris> damn
[17:22] <DarthTetris> oh god
[17:22] <shiggity> lol'
[17:22] <blackangelpr> pressure679, then you click xchat set the password there automatically
[17:23] <pressure679> Anyway, my mic doesn't work, I tried configuring alsamixer and pavucontrol but no result, any idea how to enable it?
[17:24] <blackangelpr> shiggity, http://askubuntu.com/questions/168736/how-to-start-gui-from-command-line
[17:24] <Shaan> hi, guys ive installed ubuntu 14.04 i plan on running a mail server which will host multiple domains, with catchall, can anyone recommend a guide to follow please?
[17:26] <usrzrqxrr> can i get signal that indicate a process have finished process?
[17:27] <Pascat> Hello! I have an HP Probook laptop, with a dock The dock has a VideoPort extention...Is there a way to tell the system to work with that when its detected (both audio and video?) So far, I haven't been able to use the VideoPort (with an HDMI Adaptor), it doesn't seem to detect it. Since it comes from an Expansion Dock, do I have to somehow tell it how to detect it somewhere? And then, How do I tell it to
[17:27] <Pascat> automaticall switch from built-in audio card to HDMI audio when its detected?
[17:29] <usrzrqxrr> can i get signal that indicate a process have finished process? example  one process is do some process in sheel (tab number1), and how to know that process is stop but we see in sheel (tab number 2) ?
[17:31] <EriC^^> usrzrqxrr: you can check if the process ended with pgrep <process name>
[17:32] <ablest1980> hi
[17:32] <usrzrqxrr> EriC^^,  thx sir.
[17:33] <ablest1980> anyone can recommend a good python
[17:33] <EriC^^> usrzrqxrr: if you need you can use pgrep -c <process name> , it will return the number of matches
[17:33] <ablest1980> ide
[17:33] <EriC^^> usrzrqxrr: welcome
[17:34] <usrzrqxrr> EriC^^, ok sir, i will use that '-c' option .thx
[17:39] <TannerPaaltomo> blackangelpr, that helped man! just wanted to say thanks a tonne for your help, you saved my ass :)
[17:39] <TannerPaaltomo> saved me from going back to windows lol
[17:40] <blackangelpr> TannerPaaltomo, happy to help ;)
[17:40] <blackangelpr> enjoy
[17:40] <TannerPaaltomo> <3
[17:42] <Shaan> hi, guys ive installed ubuntu 14.04 i plan on running a mail server which will host multiple domains, with catchall, can anyone recommend a guide to follow please?
[17:45] <blackangelpr> Shaan, i had not done this since 10 yrs haha so i hope this helps https://www.digitalocean.com/community/tutorials/how-to-install-and-setup-postfix-on-ubuntu-14-04  google and you tube its your allie now XD
[17:47] <blackangelpr> Shaan, also did you consider using juju ?   postfix have a charm there https://manage.jujucharms.com/~joseeantonior/precise/postfix
[17:49] <Flat4ForLife> Anyone here good with Grub?
[17:50] <Flat4ForLife> Having video issues booting
[17:52] <bubbasaures> Flat4ForLife, Give details for help here.
[17:52] <bubbasaures> hardware and what you have done is helpful
[17:53] <Flat4ForLife> Dual booting on a dual gpu laptop. After Grub, no video. No prompt or cursor or splash. Intel +& and Radeon card. Tried a few different video params even nomodeset and can't get anything
[17:53] <Flat4ForLife> Intel HD rather
[17:54] <bubbasaures> Flat4ForLife, This a UEFI computer and the second OS W8?
[17:54] <Flat4ForLife> Indeed
[17:54] <bubbasaures> Flat4ForLife, So an optimus setup?
[17:55] <Flat4ForLife> Not sure what an optimus setup is
[17:55] <Flat4ForLife> Integrated graphics and a dedicated video card if that's what you mean, yes
[17:56] <bubbasaures> Flat4ForLife, The exact graphic hardware usually matters a great deal here is all, graphics are not my best area of help is all.
[17:57] <Flat4ForLife> It's an Intel i7 with HD graphics on board, Nvidia 840m on dedicated
[17:57] <bubbasaures> what happen to the radeon?
[17:58] <Flat4ForLife> Oh did I say Radeon? Sorry by bad, must have got it mixed with my desktop. This is an Nvidia
[17:59] <BluesKaj_> Flat4ForLife, do you have the pci graphics card set up as default in the uefi/bios ?
[17:59] <Flat4ForLife> There are no graphics options in bios from what I can tell
[18:00] <BluesKaj_> Flat4ForLife, what's your pc model ?
[18:00] <Tom84> sme
[18:00] <Tom84> smee
[18:00] <Flat4ForLife> MSI GP60 2PE Leopard,
[18:01] <Tom84> smee
[18:01] <Flat4ForLife> Ms-16gh is the model number
[18:02] <Tom84> same
[18:02] <Tom84> mi
[18:04] <BluesKaj_> Flat4ForLife, looks like you should be using the nvidia-340 or higher driver for that gpu
[18:05] <Flat4ForLife> I haven't gotten to a point to install a driver
[18:06] <Simplar> http://rghost.ru/59836083/image.png << can I have opinions about this? :)
[18:07] <walia6> hi
[18:07] <walia6> Is it possible to make a file, that when i click on it, it does the same thing as execute 'java -jar whatever.jar' in terminal?
[18:07] <walia6> sort of like .bat files in windows
[18:08] <negativezero> Hi guys, I'm having a bit of an issue with LightDM at the moment. I have multiple .desktop files in my /usr/share/xsessions folder, but LightDM still wont give me the option to select which session i want to launch with. Anyone have any ideas?
[18:10] <trijntje> walia6: .desktop files, but you will have to specify the full path to what you want to run
[18:10] <negativezero> yeah thats fine
[18:10] <walia6> ok, so can each line just be a single command to execute?
[18:10] <negativezero> the .desktop files are fine, im sure. the executable is in /usr/bin
[18:10] <walia6> for example
[18:10] <SonikkuAmerica> negativezero: Did you reboot or restart X?
[18:10] <negativezero> reboot
[18:11] <theadmin> walia6: You're looking for a shell script, actually. It's just a regular text file, but it has to start with this line: #!/bin/bash
[18:11] <SonikkuAmerica> negativezero: Are your .desktop files correctly configured?
[18:11] <trijntje> walia6: is this about clicking once or about running a bunch of 'terminal' commands?
[18:11] <theadmin> walia6: Then, list commands on each line. Similar to the .bat scripts.
[18:11] <walia6> if the content of lets say... A.desktop was just 'java -jar /home/andre/Desktop/myjar.jar
[18:11] <walia6> ah ok
[18:11] <BluesKaj_> Flat4ForLife, can you boot with the recovery kernel ?
[18:11] <walia6> to make a shell script
[18:11] <theadmin> walia6: Then just make it executable and double-click on it to run.
[18:11] <negativezero> SonikkuAmerica: yeah, I git cloned the bspwm source, built and copied the .desktop file that was supplied
[18:11] <Flat4ForLife> Blueskaj_, no
[18:11] <SonikkuAmerica> (Hi theadmin , long time no see!)
[18:11] <walia6> does it to have a cerain ending
[18:11] <theadmin> SonikkuAmerica: Hello
[18:11] <negativezero> Currently im booting into openbox
[18:11] <walia6> like .shell
[18:11] <walia6> or something
[18:12] <theadmin> walia6: No, can be anything. ".sh" is very common though.
[18:12] <walia6> ok
[18:12] <theadmin> walia6: But it's not required.
[18:12] <SonikkuAmerica> negativezero: Did you [ chmod +x ] the .desktop file?
[18:12] <negativezero> I feel the lightdm.conf, might be defaulting into openbox, and not bothing to check, but im lost in the configs
[18:12] <BluesKaj_> !boot repair |Flat4ForLife
[18:13] <BluesKaj_> !boot-repair |Flat4ForLife
[18:13] <SonikkuAmerica> BluesKaj_: Boot Repair is outdated.
[18:13] <BluesKaj_> odd
[18:13] <negativezero> SonikkuAmerica: The binary is 755 yeah
[18:13] <BluesKaj_> SonikkuAmerica, really it works here
[18:13] <SonikkuAmerica> BluesKaj_: Regression to 12.04 is required by manually editing the file in /etc/apt/sources.list.d/
[18:14] <BluesKaj_> on 14.10 etc
[18:14] <walia6> here, i made http://paste.ubuntu.com/9582049/
[18:14] <BluesKaj_> BS
[18:14] <walia6> i double clicked it
[18:14] <walia6> and nothing happened
[18:14] <SonikkuAmerica> negativezero: So what if the binary is 755. The desktop file has to have execute permissions too! :)
[18:14] <walia6> if i run the last 2 lines in Terminal, it does work tho
[18:14] <theadmin> walia6: You need to make it executable in properties
[18:14] <walia6> ohh
[18:14] <theadmin> walia6: It's on the Permissions tab.
[18:15] <walia6> ok, found it
[18:15] <SonikkuAmerica> BluesKaj_: (a) Is it in the repos now? (b) If not, where would I get a utopic version??
[18:15] <walia6> hmm
[18:15] <walia6> i set the permission as 'allow executing file as program' and when i double click it, it opens it in gedit
[18:16] <negativezero> SonikkuAmerica: Ahh you might be onto something, the other files are all 644, so i assumed that it would be fine
[18:16] <BluesKaj_> you don't need a utopic boot-repair version , boo-repair is debian based small OS , SonikkuAmerica you can run it  as a live cd/usb to restore grub
[18:16] <SonikkuAmerica> BluesKaj_: Oh. (New one on me.)
[18:16] <Simplar> updated.
[18:17] <SonikkuAmerica> negativezero: The .desktop files are 644? How are they even being detected by LightDM then?
[18:17] <plt> What file has the libesd.so?
[18:17] <bigmacs>  /msg negativezero Hey bitch
[18:17] <teward> plt: multiple.
[18:17] <SonikkuAmerica> negativezero: Scratch that. I'm an idiot. 644 is fine.
[18:17] <walia6> i set the permission as 'allow executing file as program' and when i double click it, it opens it in gedit
[18:18] <teward> plt: libesd0 might be what you need
[18:18] <SonikkuAmerica> negativezero: However, the .desktop files in /usr/share/xsessions/ need to be owned by root
[18:18] <plt> File is missing.
[18:18] <negativezero> they are
[18:18] <teward> plt: or libesd0-dev
[18:18] <teward> plt: those're package names :)
[18:19] <plt> Ty
[18:19] <davidgl> Danke!
[18:19] <negativezero> SonikkuAmerica: So im back to square one really. LightDM just isnt displaying he option for what session to choose. but somehow defaulting to Openbox
[18:20] <SonikkuAmerica> negativezero: I would tell you to check the Exec= line to make sure it matches where you installed bpswm
[18:22] <negativezero> SonikkuAmerica: Yeah, thats find too. This is very odd
[18:27] <jakew> I am trying to install ndiswrapper on a machine that I cannot connect to the Internet via Ethernet and I'm pretty sure it's the only way the wireless card is supported. There is a bug so that just installing ndiswrapper and its dependencies does not work. I want to try to compile it, but I've been tracking down lots of packages to get gcc up and going and moving them with a thumbdrive. Is there an easier way?
[18:29] <BluesKaj_> jakew, which wifi card/chip?
[18:29] <jakew> BluesKaj_: It's a Belkin N600 USB
[18:31] <jakew> BluesKaj_: I'm not positive what chipset, but I'm guessing ndiswrapper is the way to go. lsusb and such don't let on
[18:31] <blackangelpr> take a look on this post about it http://ubuntuforums.org/showthread.php?t=2239359
[18:32] <blackangelpr> last one
[18:32] <dinosaur> Is it a good idea to run rsnapshot on the machine which I want to back up?
[18:33] <jakew> blackangelpr: Thanks, I'll try that
[18:35] <johnd23> I am looking for help on getting shotwell to import photos from an iphone 6 + again. It was working fine on 13.10 i had upgraded to 14.04 when it broke and now I am on 14.10. I have upgraded to the latest libimobiledev with no change. Shotwell fails with: 00error message: [-107] Error retrieving file object for /DCIM/924DKYTK/IMG_2558.JPG: Unknown error
[18:36] <jakew> sadly, that still leads me to needing an internet connection to get build-essentials. Is there an easy way to download all the deb files I need in bulk? I'm renting an apartment where I only hae a wireless connection so I can't hook the machine up to ethernet
[18:37] <krzysztof> Hi everyone!
[18:38] <Sauron> Hola
[18:40] <conradicus> hello
[18:41] <squinty> jakew: if you just want the deb packages themselves might want to try using the -d  option in apt-get  (type apt-get in a terminal to see other options too)
[18:42] <blackangelpr> cd rtl8192du
[18:42] <blackangelpr> make
[18:42] <blackangelpr> make install
[18:42] <blackangelpr> modprobe 8192du
[18:43] <jakew> squinty: I'll try that
[18:43] <jakew> blackangelpr: I don't have gcc working yet...
[18:43] <jakew> blackangelpr: that would be easy to do if I just had an ethernet connection to install build-essential
[18:43] <squinty> jakew: btw, the package name is   build-essential  not   build-essentials :P
[18:44] <jakew> squinty: got it :)
[18:44] <blackangelpr> jakew, so a dumb question did you saw anything at all when you write:  lsusb
[18:46] <jakew> blackangelpr: yes, it was a bit vague, but some of these links seems to make sense. It just says ID 050d:110a Belkin Components
[18:46] <blackangelpr> ok
[18:47] <jakew> does build-essential still exist?
[18:47] <Sauron> HI
[18:47] <Sauron> Anybody speaks spanish?
[18:48] <blackangelpr> Me , yo  escribe privado (private plz)
[18:48] <squinty> !es | Sauron
[18:49] <Sauron> thanks!!
[18:49] <blackangelpr> Sauron, a tu izq en rojo apreta en mi nombre
[18:49] <blackangelpr> :p
[18:51] <EriC^^> ^^ plz dont ask me for my number though?
[18:51] <blackangelpr> talking about this irc things ubuntu should change default irc channel for the default ubuntu language like this person cant find help now :p
[18:51] <EriC^^> blackangelpr: he can easily read ubottu 's msg
[18:52] <blackangelpr> you be surprise EriC^^
[18:52] <EriC^^> if he can't read that
[18:52] <EriC^^> how's he going to get in the channel that speaks the language anyways?
[18:52] <EriC^^> *get help
[18:53] <blackangelpr> i still have problems with my clock it shows me 24 hrs instead of 12 hrs clock do you know how to fix that? kind of annoyed
[18:53] <Bleakwise> question about centos
[18:54] <EriC^^> unity?
[18:54] <Bleakwise> err sorry, ubuntu
[18:54] <blackangelpr> i had already click on 12 hour settings on clock,...
[18:54] <Bleakwise> what is it that lets my windows machines detect my ubuntu machine on the network?
[18:54] <blackangelpr> Bleakwise, !samba
[18:54] <Bleakwise> i mean, if i plug in an ubuntu machine, i can just ping it from windows computers, "ping ubuntu-server" it works
[18:54] <blackangelpr> !Samba
[18:54] <blackangelpr> bah
[18:54] <Bleakwise> ubuntu doesn't install samba by default does it?
[18:55] <Bleakwise> also, my router picks up the hostname of ubuntu machine as well
[18:55] <EriC^^> isn't samba about ubuntu reading windows shares? not the other way around?
[18:55] <popey> Bleakwise: no, samba isn't installed by default
[18:55] <blackangelpr> Bleakwise, https://help.ubuntu.com/lts/serverguide/samba-fileserver.html
[18:55] <popey> both
[18:55] <EriC^^> windows can't even read ext anyways
[18:55] <EriC^^> oh ok
[18:55] <Bleakwise> samba is about >hosting< windows shares
[18:55] <popey> samba has both a client and server
[18:56] <Bleakwise> anyway, i never installed samba on my ubuntu machine, just wondering what it is that is broadcasing the machine's hostname
[18:56] <EriC^^> blackangelpr: try to reset the indicator maybe
[18:56] <popey> Bleakwise: it tells the dhcp server (your router) its hostname when it requests an IP
[18:56] <sameer-isa> I don't use Ubuntu
[18:56] <popey> (like other devices do)
[18:56] <EriC^^> blackangelpr: try restart indicator-datetime
[18:57] <Bleakwise> i see, so it's a dhcp deal, thx
[18:57] <blackangelpr> EriC^^,  do not work i try many things XD and the worst i cant take screen shot lol because it auto hide the clock /calendar area when doing it to show you
[18:59] <Bleakwise> here we go, this is what i found to solve my issue http://unix.stackexchange.com/questions/120007/centos-6-not-regestering-new-hostname-on-windows-server-2003
[18:59] <blackangelpr> i give up i can read 24hr any way :'( but others might not  seems to be a a bug
[18:59] <Bleakwise> thx ubuntu guys, i'm actually trying to get my centos machine to behave more like ubuntu in that reagrd, this should do it, thx again
[18:59] <popey> yeah, we figured that when you lied about which distro you ran when you arrived!
[18:59] <Bleakwise> i'd just always thought dhcp was a 1 way street
[19:00] <EriC^^> Bleakwise: yeah
[19:00] <popey> ☻
[19:00] <EriC^^> freudian slip on irc
[19:01] <lubuntubiggestfa> my steam won't launch on lubuntu, it was running fine last night but this morning it's not runniing
[19:01] <lubuntubiggestfa> what gives?
[19:01] <lubuntubiggestfa> i've already restarted my computer like 10 times i don't get it
[19:02] <blackangelpr> popey, thanks for the google+ comunity Q&A enjoy them getting the news from the source :-) and to all your team !
[19:03] <curiousx> ☻
[19:03] <lubuntubiggestfa> please someone who knows a lot aboiut steam help me :( I'm miserable right now man!
[19:03] <popey> lubuntubiggestfa: what happens when you run steam from the command line?
[19:03] <lubuntubiggestfa> let me try
[19:04] <lubuntubiggestfa> I type "steam" and i get...
[19:04] <popey> pastebin the output
[19:04] <lubuntubiggestfa> right here?
[19:04] <popey> !paste
[19:04] <lubuntubiggestfa> http://paste.ubuntu.com/9582427/
[19:04] <anarkhos|2> "npm install" results in "ENOENT" error, errno 34. the installer can't find "package.json", but im following the steps as explained on the getbootstrap site. is this a common problem?
[19:04] <lubuntubiggestfa> it says it's already running?
[19:04] <lubuntubiggestfa> that can't be possible
[19:06] <popey> lubuntubiggestfa: thats not what it says
[19:06] <lubuntubiggestfa> it says "it's running steam" so i'm assuuming that means it's already running
[19:06] <popey> no
[19:07] <bekks> lubuntubiggestfa: whats the exact, unchanged output you are seeing?
[19:07] <lubuntubiggestfa> that information dosen't tell much though
[19:07] <Bleakwise> does ubuntu install samba-winbind by default?
[19:07] <popey> is that all it says?
[19:07] <bekks> Bleakwise: No.
[19:07] <lubuntubiggestfa> bekks:  yeah that's all it says
[19:07] <lubuntubiggestfa> those two lines
[19:07] <popey> lubuntubiggestfa: ps aux | grep steam
[19:07] <popey> lubuntubiggestfa: any steam processes running?
[19:08] <lubuntubiggestfa> nope pope popey http://paste.ubuntu.com/9582469/
[19:08] <bekks> lubuntubiggestfa: Which two lines?
[19:08] <popey> lubuntubiggestfa: yes. you do.
[19:08] <lubuntubiggestfa> the first pastebin i showed you
[19:08] <lubuntubiggestfa> has two lines
[19:09] <lubuntubiggestfa> weird if it's running then hwo come i don't see it?
[19:09] <bekks> lubuntubiggestfa: It does not say a word about "already", actually.
[19:09] <lubuntubiggestfa> my mistake, that's how I interpreted it
[19:09] <Bleakwise> ahh okay, found the thing i think: http://possiblelossofprecision.net/?p=1377  if anyone cares
[19:09] <popey> lubuntubiggestfa: is there a steam icon in the indicator area?
[19:09] <lubuntubiggestfa> ya
[19:09] <lubuntubiggestfa> there is
[19:10] <popey> lubuntubiggestfa: its running then
[19:10] <popey> click it
[19:10] <bekks> Bleakwise: Which "thing"? And how is that related to samba-winbind?
[19:10] <lubuntubiggestfa> nothing is popping up
[19:10] <lubuntubiggestfa> LOL
[19:10] <lubuntubiggestfa> oh
[19:11] <lubuntubiggestfa> i exited it and now it opens
[19:11] <Bleakwise> I was trying to get my router/windows machines to detect my linux machines hostname, just like it does with ubuntu by default
[19:11] <popey> magic
[19:11] <lubuntubiggestfa> strange!
[19:11] <lubuntubiggestfa> thanks, time to game all day cya
[19:11] <popey> \o/
[19:11] <blackangelpr> XD
[19:11] <lubuntubiggestfa> you are teh solutionist popey !
[19:11] <Bleakwise> ie if i plug in an ubuntu machine i can do "ping unbuntu-host" on a windows box
[19:11] <popey> lubuntubiggestfa: enjoy CS:S ☻
[19:11] <popey> dammit
[19:12] <Bleakwise> and samba-winbind is related because it's also a method to share hostnames on a network
[19:12] <bekks> Bleakwise: Thats not true.
[19:12] <Bleakwise> winbind and dns are aimed at the same problem, resolving hostnames
[19:13] <bekks> Bleakwise: Winbind is a samba method of accessing network sharing hosts by their names. Not a method to resolve hostnames. Winbind requires Samba, and qorks with samba only, and has nothing to do with DNS.
[19:13] <Bleakwise> bekks, on a fresh install of ubuntu yes it is true, you just plug it in your network and it will even show up on a window's machines "network" list, fresh install, without samba selected
[19:14] <bekks> Bleakwise: On a default install, their is no samba-winbind installed.
[19:14] <Bleakwise> well i never said there was
[19:14] <Bleakwise> i just said a freshly installed ubuntu box will show up in "network neighborhood"
[19:15] <mirak> can i live without a swap file ?
[19:15] <Bleakwise> and yes, Windows Bind functoin is aimed at the same problem as DNS, assocating ip addresses with names
[19:15] <popey> mirak: depends
[19:16] <bekks> Bleakwise: No. Winbind is aimed towards resolving hostnames of servers with samba shares - nothing to do with DNS.
[19:16] <popey> mirak: http://askubuntu.com/questions/49109/i-have-16gb-ram-do-i-need-32gb-swap/49130#49130
[19:17] <popey> mirak: basically "It depends what you do with your computer"
[19:17] <Bleakwise> you just finisehd telling me Winbind has nothing to do with "resovling hostnames" now it does? lol
[19:17] <bekks> Bleakwise: Do you actually read what people tell you? Do you even know the difference between Samba and DNS?
[19:17] <popey> now now.
[19:17] <Bleakwise> yes, do you?
[19:18] <Bleakwise> evidnelty you have no clue, they're both two methods addressing the same problem
[19:18] <bekks> Bleakwise: Obviously you dont know what Winbind does.
[19:18] <Bleakwise> you obviously have no clue, both of them assocate a network address with a human readable name
[19:18] <Bleakwise> do you even read what people say? i never said they were the exact same thing
[19:19] <Bleakwise> classic projection much?
[19:19] <bekks> Bleakwise: Do you know what a kill file is? *plonk*
[19:19] <Bleakwise> LOL you're so cool bro
[19:19] <bekks> No point in wasting my time any further with you.
[19:19] <Bleakwise> do you even c++
[19:19] <popey> enough
[19:19] <mirak> popey, it's just that I want to use btrfs, and need to create partitions for swap because swapfiles are not supported yet in btrfs
[19:19] <Bleakwise> do you even know what OOP is
[19:19] <popey> Bleakwise: enough.
[19:20] <popey> this is a support channel not a way to show the size of your whatever.
[19:20] <Bleakwise> sorry popey, i just don't respond well to trolling
[19:20] <popey> mirak: i use btrfs with swap partition personally.
[19:20] <Bleakwise> and i'm not the one trying to brag or condescend on people
[19:21] <popey> final warning. enough now.
[19:21] <teward> Bleakwise: ***enough***, you can stop now.  (listen to popey)
[19:21] <Bleakwise> anyway, i would like to know, what feature of ubuntu is it that gives it's hostnames off to windows machines on a network?
[19:22] <bekks> mirak: The filesystem used (besides swap) is actually irerelevant to swap. More likely, the question "Do I need swap?" can be answered by knowing more about your usecase. Do you just want to test out btrfs, or do you want to build a server with it, etc.?
[19:23] <mirak> bekks, you are wrong
[19:23] <mirak> bekks, if you want to use a swapfile, instead of a swap partition
[19:24] <mirak> btrfs doesn't handle swapfiles, unofrtunely
[19:24] <mirak> for now
[19:24] <mirak> so you have to create a separate partition
[19:24] <bekks> mirak: Yeah, so the question "Do I even need a swap partition?" has to be answered.
[19:24] <popey> i ended up using ext4 for root, and a swap partition
[19:24] <popey> and if i need additional swap I add a swapfile to the ext4 partition
[19:25] <popey> in general you should have *some* swap.
[19:27] <Bleakwise> is nmbd installed in ubuntu by default?
[19:28] <shuvojit> anybody online?
[19:28] <teward> Bleakwise: nmbd?
[19:28] <teward> shuvojit: ask your real question instead
[19:28] <teward> to the channel
[19:28] <Bleakwise> http://manpages.ubuntu.com/manpages/hardy/man8/nmbd.8.html
[19:29] <shuvojit> i just installed Ubuntu 14.04 LTS, whenever i open youtube and open any video page. the whole screen goes black, and only pointer can be seen, the audio of the video can be heard in background.
[19:29] <teward> Bleakwise: do you mean 'samba'?
[19:29] <EriC^^> !find nmbd
[19:29] <Bleakwise> it's curious that af reshly installed ubuntu machine is detected by windows machines on my network, that's why i ask
[19:29] <Bleakwise> and no, i don't mean samba
[19:30] <EriC^^> i think you mean samba
[19:30] <Bleakwise> nmbd is only a small part of samba
[19:30] <teward> Bleakwise: nmbd is part of samba, but it's part of smaba
[19:30] <teward> samba*
[19:30] <Bleakwise> actually nmbd isn't even samba, samba is much more than the wins protocal
[19:30] <popey> Bleakwise: no
[19:30] <teward> Bleakwise: extracted from the trusty manpage for nmbd:  "This program is part of the samba(7) suite."
[19:31] <Bleakwise> the samba suite isn't installed on ubuntu by default
[19:31] <fanisback> hey popey  i'm back
[19:31] <Bleakwise> yet ubuntu boxes show up on windows machines network list by default, without samba
[19:31] <Bleakwise> apt-get install nmbd is not the same as apt-get install samba
[19:32] <EriC^^> Bleakwise: because ubuntu is about sharing
[19:32] <EriC^^> ( tm )
[19:32] <popey> Bleakwise: either way, the answer is still no.
[19:32] <fanisback> I've been trying to get sc2 to work on my lubuntu, but nothing works. I tried wine.
[19:32] <Bleakwise> what is no?
[19:32] <popey> neither samba nor nmbd are on by default.
[19:32] <shuvojit> whenever i open youtube and open any video page. the whole screen goes black, and only pointer can be seen, the audio of the video can be heard in background. any suggestions? !!
[19:32] <Guest65611> What package provides the ability to take a screenshot?
[19:33] <popey> Guest65611: gnome-screenshot, shutter, there's a few
[19:33] <Bleakwise> very odd that my windows boxes are getting netbios packets from a fresh ubuntu install then
[19:33] <EriC^^> Guest65611: alt+printscreen does it for me
[19:33] <EriC^^> Guest65611: shutter is excellent though
[19:33] <Guest65611> EriC^^, alt+printscreen isn't working for me
[19:33] <Guest65611> So I'm trying to file a bug about it
[19:33] <popey> Guest65611: is this ubuntu?
[19:33] <Guest65611> popey, yeah
[19:33] <Guest65611> 15.04
[19:33] <popey> we dont support 15.04 here
[19:34] <popey> #ubuntu+1 is for 15.04 support
[19:34] <Guest65611> popey, I'm not asking for support
[19:34] <Guest65611> Ah thanks
[19:34] <squinty> http://packages.ubuntu.com/search?searchon=contents&keywords=nmbd&mode=exactfilename&suite=trusty&arch=any  seems it is   afair, I did not install nmbd on my ubuntu system but it is installed anyways
[19:35] <fanisback> anyone in here know whether sc2 runs on lubuntu in 2014?
[19:35] <Meerkat> fanisback, it does, atleast on my machines.
[19:35] <fanisback> Meerkat:  do you know how to install it easily
[19:35] <fanisback> or did you just use wine
[19:35] <teward> fanisback: I think you need Wine.
[19:35] <fanisback> i tried
[19:35] <fanisback> wine doesn't work for me
[19:35] <Meerkat> Wine, yes. Wine is required.
[19:35] <teward> fanisback: unless they developed a linux version
[19:36] <mirak> bekks, right now my computer as  2Tera drive in raid with a layer like : gpt > mdraid > lvm > ext4    . I was thinking btrfs would reduce the layers. and there is also checksuming that intersts me
[19:36] <fanisback> i need the version you're running on Meerkat
[19:36] <Meerkat> fanisback, do you have wine installed?
[19:36] <mirak> bekks, also in the futur the possibility to do raid0 and raid1 at subvolume level
[19:36] <fanisback> ya Meerkat  i do
[19:36] <popey> mirak: personally I would stick with what you have. btrfs isn't stable yet.
[19:36] <fanisback> i know wine works since i downloaded notepad and ntoepad +++
[19:37] <fanisback> but when i select sc2-wingsofliberty ,it g ives me an error
[19:37] <Meerkat> what is the error?
[19:37] <fanisback> let me run the install again and see what the error said
[19:37] <fanisback> one sec
[19:39] <fanisback> ok the error popped upt for a second
[19:39] <mirak> popey, lol.
[19:39] <mirak> popey, yeah, they say it's better now
[19:39] <mirak> popey, but you certainly have a point
[19:39] <fanisback> "we cannot access folder because you're not logged in as adminstrator"
[19:40] <fanisback> it doesn't get passed this point
[19:40] <Kote_> Hello
[19:42] <Meerkat> fanisback, https://www.winehq.org/download/ubuntu you should update to the latest Wine version as instructed here.
[19:42] <Proga4451> Hello! Today i have installed Kubuntu 14.04 but i have some problem with the "Terminal" i think its an encoding problem, so when i write in Terminal something like "t" it gives me "t: \u043a\u043e\u043c\u0430\u043d\u0434\u0430 \u043d\u0435 \u043d\u0430\u0439\u0434\u0435\u043d\u0430" How can i fix that?
[19:42] <fanisback> meerkat will do that
[19:42] <fanisback> now
[19:43] <Meerkat> do a software update to get the latest Wine version.
[19:45] <Bleakwise> popey: i'm assuming what I saw as there froma  "fresh install" was just an illusion of Ubuntu installing some kind of windows sharing on its own whever I first clicked "network" in nautalus
[19:47] <Bleakwise> Meerkat look up the wine ppa
[19:47] <Bleakwise> probably the easiest way
[19:47] <fanisback> Meerkat:  im confused
[19:47] <Bleakwise> you were trying to get starcraft going right?
[19:47] <fanisback> im looking at it
[19:47] <fanisback> for like 5 minutes
[19:48] <Meerkat> fanisback, looking at what?
[19:48] <fanisback> the directions to install wine
[19:48] <fanisback> i clicked on it
[19:48] <fanisback> and it gives me an error
[19:48] <Proga4451> So anyone knows how to fix my problem? :)
[19:49] <popey> Proga4451: maybe ask in #ubuntu?
[19:49] <Meerkat> fanisback, enter this in a terminal window: sudo add-apt-repository ppa:ubuntu-wine/ppa
[19:49] <popey> er, #kubuntu
[19:49] <fanisback> ok Meerkat
[19:49] <Bleakwise> if you realy want to do gaming on linux http://www.playonlinux.com/en/download.html
[19:49] <fanisback> done Meerkat
[19:49] <Proga4451> popey: But they are similar?
[19:50] <flexus> reinstalled 14.04 and getting hangs in X every minute. only mouse move possible.
[19:50] <popey> Proga4451: no, ubuntu ships with gnome terminal, kubuntu ships with konsole
[19:50] <Proga4451> popey: Oh ok
[19:50] <popey> flexus: what video card?
[19:50] <flexus> old ati x1200
[19:50] <popey> ah okay.
[19:50] <flexus> popey, (acer)notebook
[19:50] <Meerkat> fanisback, now do a update wherever Lubuntu has the updater. There should be a new version of Wine available. Install that then start the installation for Starcraft 2.
[19:51] <popey> flexus: sorry, i know nothing about ati
[19:51] <Bleakwise> fanisback: let the play-on-linux guys do all the work, their program has a ton of different verions of wine, compiled differently for different games,
[19:51] <flexus> plugin container uses 23% proc or so
[19:51] <popey> flexus: flash? ☹
[19:51] <fanisback> Bleakwise:  i also tried that, did not work
[19:51] <fanisback> Meerkat:  okay
[19:51] <soon> When installing an ubuntu server from scratch -- I can not create a MySQL root when prompted (I enter a password, but a little later, I'm informed it failed...) Whats going on there?
[19:51] <flexus> popey, already tried pepperflash
[19:51] <fanisback> Meerkat:  do you mean do a system update ?
[19:52] <flexus> mouse movement stays fluent, but rest of system hangs
[19:52] <Meerkat> fanisback, yes
[19:52] <fanisback> is it "software & updates"?
[19:53] <Meerkat> I think it is called software updater
[19:53] <fanisback> i only have synpatic package manager
[19:53] <fanisback> oh
[19:53] <fanisback> i found it
[19:53] <Meerkat> they have to be confusingly similar in name or it isn't hard enough.
[19:53] <Meerkat> ;)
[19:53] <fanisback> sorry im a total newb :)
[19:54] <fanisback> so far the only thing i have done on my linux is gaming
[19:54] <fanisback> ok its updating stuff now
[19:54] <EriC^^> my friend has windows xp and we're trying to install lubuntu 14.04, he doesn't have a windows xp cd, in case he wants to remove lubuntu later, can we just dd the first 512bytes of the disk and then dd them back to fix the mbr later?
[19:55] <squinty> soon: #ubuntu-server
[19:56] <scriptThis> how can I see which PPA's I've added via add-apt-repository?
[19:56] <EriC^^> scriptThis: cat /etc/apt/sources.list.d/*
[19:57] <OerHeks> EriC^^, you can use UBcd, freeware mbr and file tools, to restore the mbr again, clean.
[19:57] <imastupidguest> I keep getting a crash. Something about indicator-session crashing. When I look at the dependencies (in the crash report details) it looks like some important system stuff (massive list of it). Can anyone help?
[19:57] <EriC^^> OerHeks: ok, thanks
[19:58] <fanisback> Meerkat:  the update finished, I ran the sc2 installer again, and it still doesn't install.
[19:59] <fanisback> Meerkat:  how do I run as administator to install it?
[19:59] <Bleakwise> fanisback you tried this? http://www.playonlinux.com/en/app-661-Starcraft_II_Wings_of_Liberty.html
[19:59] <scriptThis> EriC^^, Thanks
[19:59] <Bleakwise> evidently the installer is what's difficult to run, the game itself isn't the problem
[19:59] <fanisback> Bleakwise:  trying now
[20:00] <Meerkat> fanisback, you shouldn't run as admin. Open a terminal and enter: wine path/to/sc2-installer.exe
[20:00] <Bleakwise> be careful with scripts and things you download, that one says it's been approved by the playonlinxu team but.... well i doubt you're playing on a bank-dtabse anyway
[20:00] <Meerkat> see if that helps any. You should atleast get a useful message.
[20:00] <Bleakwise> just don't try it on the work-computer xD
[20:00] <fanisback> Meerkat:  "wine: cannot find 'wine path/to/sc2-installer.exe'
[20:01] <fanisback> the installer i downloaded is in the download folder
[20:01] <Meerkat> you have to enter the actual path.
[20:01] <imastupidguest> Ok, so here's a screen shot of the top of that dependency list - looks like security related systems being effected (to me) : http://imgur.com/tw1Ypca
[20:01] <fanisback> oh
[20:01] <fanisback> if it's in /home/zero/Downloads then is it wine path/to/home/zero/Downloads?
[20:02] <Bleakwise> wine is in $home/.wine/drive_c/
[20:02] <Bleakwise> or something liek that
[20:02] <fanisback> confused
[20:03] <Meerkat> fanisback, wine Downloads/sc2-installer.exe
[20:03] <Bleakwise> i'm not aware of the whole situation tho tbh it shouldn't matter where it is as long as you specify the right path to the file
[20:03] <Bleakwise> oh
[20:03] <Meerkat> but make sure you enter the actual file name. you cant just copy-paste my lines
[20:03] <fanisback> Meerkat:  still cannot find
[20:03] <Bleakwise> you need the installer.exe?
[20:03] <fanisback> oh
[20:03] <fanisback> i was copying and pasting
[20:04] <Bleakwise> well the CD is probalbyu mounted in like /mount/disk/
[20:04] <Bleakwise> or /mnt/disk
[20:04] <Meerkat> Bleakwise, there is no CD.
[20:04] <Bleakwise> you installing from CD or download?
[20:04] <Bleakwise> oh okay
[20:04] <Bleakwise> so /home/fanisback/Downloads/installer.exe?
[20:04] <fanisback> Meerkat:  i ran it and still the same "run as admin" error
[20:04] <Bleakwise> running it from command line?
[20:04] <Bleakwise> add "sudo" before the command
[20:05] <imastupidguest> The govt is hacking my computer an no one cares
[20:06] <imastupidguest> yes, linux could get viruses too.
[20:06] <fanisback> when i do sudo wine Downloads/sc2-installer.exe , it tells me that wine isn't owned by me
[20:07] <popey> you dont want to run wine under sudo!
[20:07] <fanisback> oh
[20:07] <popey> you'll end up with files all over your home directory owned by root
[20:07] <popey> which is sub-optimal
[20:07] <gear4> hi
[20:07] <fanisback> that sounds terrible
[20:07] <popey> imastupidguest: troll elsewhere please.
[20:08] <imastupidguest> popey: rude
[20:08] <imastupidguest> you are extremely extremely rude sir
[20:08] <popey> do you have an ubuntu support question?
[20:08] <gear4> whenever I try to remove a foldeer, "rm" reports the directory as not being empty, but when I do "ls -a" that returns "Input/output error"; any idea why ?
[20:08] <imastupidguest> I came here to ask a question - JUST LIKE EVERYONE ELSE
[20:09] <imastupidguest> popey: Do you see it ^ ??
[20:09] <popey> imastupidguest: ask it rather than make stupid pronouncements
[20:09] <imastupidguest> popey: Do you see it ^ ??
[20:09] <gear4>  /ignore
[20:09] <popey> imastupidguest: https://imgur.com/tw1Ypca ?
[20:09] <popey> imastupidguest: just press continue button and a crash report will be uploaded
[20:09] <imastupidguest> that's right popey - from the one you call a troll!!!
[20:09] <popey> or close the window
[20:10] <gear4> can I please get some help ?
[20:10] <popey> gear4: is it a hard disk or usb stick or what?
[20:10] <imastupidguest> hey fucker - I'm here in #ubuntu asking the question - not pushing a fucking button and hoping something comes of it
[20:10] <gear4> hard disk
[20:10] <gear4> external
[20:10] <imastupidguest> popey: YOu don't know - then don't answer
[20:10] <popey> oops
[20:11] <popey> imastupidguest: i do know and I did answer
[20:11] <popey> imastupidguest: look in /var/crash to see what crashed.
[20:12] <EriC^^> popey: did you set it to invite only?
[20:12] <popey> ah crud
[20:12] <gear4> lol
[20:12] <imastupidguest> popey: So you're trying to suggest that this is something that can't be dealt with outside the company Ubuntu?
[20:12] <imastupidguest> like most of our other problems?
[20:12] <popey> imastupidguest: nope, didnt say that
[20:13] <popey> imastupidguest: I said you could look in /var/crash to see what the crash was
[20:13] <gear4> why not just +pg instead of +mispg then setting -mis
[20:13] <popey> imastupidguest: i also suggested how you could upload the crash report
[20:13] <imastupidguest> like this is somehow different and only a dev working for ubuntu could deal with it (by pushing the button to send a report)
[20:13] <imastupidguest> ?
[20:13] <Bleakwise> btw Popey: i'm starting to see the idealogical diff between ubuntu and cenots. in Ubuntu you set your hostname yourself during setup, on centos, they (by default) leave it blank to be set on a router and grabbed via dhcp
[20:13] <imastupidguest> where? when?
[20:13] <popey> imastupidguest: about 4 minutes ago
[20:14] <EriC^^> popey: something's still off i think, nobody's joining, what's p and g?
[20:15] <popey> \o/ works
[20:15] <popey> sorry about that :D
[20:16] <gear4> you should set +G
[20:16] <gear4> lol
[20:16] <gear4> it's a family channel no ?
[20:16] <popey> I'm not touching it for now.
[20:16] <popey> dont want to break it further ☻
[20:16] <gear4> lol
[20:16] <gear4> +G strips profanity
[20:17] <popey> I dont think we set that usually.
[20:17] <popey> anyway.
[20:17] <gear4> just saying ^^
[20:17] <popey> sure
[20:17] <popey> thanks ㋛
[20:17] <gear4> np lol
[20:17] <gear4> but I'm still waiting anyhow
[20:17] <popey> imastupidguest: the crash report can be unpacked and you can diagnose the issue youself if you're a developer
[20:18] <popey> gear4: did you reply to my question? i may have missed it?
[20:18] <popey> is it a disk or usb or sd card or something?
[20:18] <gear4> yes I did
[20:18] <gear4> hard disk, external
[20:18] <popey> ah i see
[20:18] <popey> what disk format?
[20:19] <popey> I mean, filesystem
[20:19] <gear4> NTFS
[20:19] <popey> ah
[20:19] <popey> run a check on it?
[20:19] <gear4> did do
[20:19] <gear4> all clear
[20:20] <gear4> also the folder's size is null
[20:20] <popey> erk
[20:20] <gear4> so idk why the check said all clear
[20:20] <popey> sounds broken
[20:20] <gear4> yep
[20:20] <gear4> which is why I came here lol
[20:20] <gear4> because I can delete/change anything else
[20:20] <gear4> except that folder
[20:21] <imastupidguest> popey: I have uploaded crash reports before and have seen things work out bc of it. I don't recall how I had it set up but the update would come in. It's just that it takes a while (weeks or months) and is not guranteed to happen at all. It wan't the kind of answer I had expected to receive.
[20:22] <popey> gear4: ugh, dunno then.
[20:22] <gear4> haha it cool but thanks
[20:22] <popey> imastupidguest: indeed, no guarantees..
[20:22] <gear4> I need to reinstall windows ..
[20:22] <popey> imastupidguest: but still worth uploading anyway ☻
[20:24] <gear4> anyway before I go; Eric^^: +p disallows KNOCK, and +G strips profanity; most likely +p disabling joins
[20:25] <gear4> merry (soon) christmas to everybody! :D
[20:26] <bubbasaures> +f converts that to happy holidays a generic proclamation
[20:27] <bubbasaures> ;)
[20:28] <EriC^^> gear4: ok, thanks
[20:42] <dw1> what's a ubuntu app for silverlight that actually works
[20:42] <dw1> rather what silverlight plugin
[20:43] <OerHeks> dw1, html5 i guess, chrome ( not chromium ) should support that standard.
[20:44] <dw1> packagei need silverlight plugin to watch silverlight vid
[20:44] <dw1> -package
[20:44] <Chuck_Norris> dw1: pipelight?
[20:44] <dw1> trying pipelight .. 300MB lol
[20:45] <OerHeks> the only solution to watch netflix is chrome AFAIK
[20:45] <bekks> OerHeks: Silverlight isnt part of HTML5.
[20:45] <Bottino> Hi all, How can i get terminal to automatically launch Bash when its opened? When ever I alunch an xterm session, I have to always type bash to launch the bash shell
[20:45] <Chuck_Norris> dw1: http://www.webupd8.org/2014/06/pipelight-027-brings-new-system-check.html
[20:45] <bekks> Bottino: instead of typing bash, type: echo $SHELL;   what does it return?
[20:47] <dw1> "Note: Pipelight does not work in Chrome / Chromium version 35 or higher" fml
[20:48] <basketballll> I am trying to use uck but i get the error message You asked for a hybrid ISO but isohybrid command was not found
[20:49] <bekks> !file isohybrid
[20:49] <naftilos76> Hi, does anybody know of any command that can load all files of a website and report loading times or other data ?
[20:49] <basketballll> !file isohybrid
[20:50] <dw1> good in firefox...
[20:51] <basketballll> bekks: is there a different program i can use
[20:52] <bekks> basketballll: I dont know what that program is used for. Just install syslinux-utils, since it provides the file you are looking for.
[20:55] <basketballll> bekks: how do i install the latest libreoffice from terminal
[20:55] <bekks> basketballll: sudo apt-get install libreoffice
[20:55] <Rootoverflow> Chrome crashed on me earlier, forcing me to do a hard reboot. When I booted up again, my Wifi dongle doesn't work, my fonts have changed, I can't change my screen settings and a load of other things seem broken. Any idea where I should start to look for errors?
[21:01] <streulma> Ubuntu on a Mac is a problem, except in a virtual machine
[21:01] <Julia7> Hi! Should I format my USB drive as NTFS, FAT32 (Default), or exFAT if I want to install Ubuntu from it?
[21:02] <Eduard_Munteanu> Julia7, no formatting needed
[21:02] <carbon13> Julia7, use fat32
[21:02] <streulma> Julia7 FAT32
[21:02] <Julia7> Eduard_Munteanu: carbon13: streulma: Thanks.
[21:03] <Eduard_Munteanu> If you simply write an ISO to it, that is.
[21:03] <carbon13> Julia7, no worries
[21:13] <japro> so uh, something seems to spin up my laptops disk every 3 seconds but... how can i find out why? iotop doesn't really tell me
[21:14] <popey> japro: probably something in /var/log
[21:14] <Nectar_> Could someone help me with an Ubuntu theme. Im tryign to set it though Emerald but when is elect it and double click it does nothing..?
[21:16] <xangua> ! Emerald
[21:17] <Nectar_> recommend any good alternatives for themeing ubuntu?
[21:18] <xangua> Gnome-look.org
[21:18] <Chuck_Norris> devianart
[21:18] <Nectar_> thanks guys
[21:18] <Chuck_Norris> http://www.deviantart.com/  np
[21:22] <Shaan> hi, guys ive installed ubuntu 14.04 i plan on running a mail server which will host multiple domains, with catchall, can anyone recommend a guide to follow please?
[21:23] <purana> Shaan: you could find guide for debian that would work just as well.. you going to run an smtp server too?
[21:27] <DrkShdw> hey guys,  I recently inherited a server running an old and no longer supported version of ubuntu.  my backgroupd is mostly RH.  I've cloned the machine into a VM, and want to try a few upgrades.
[21:28] <DrkShdw> when going from a non lts version, to an lts version,  is there anything special I have to do?  is "LTS" just a thing we humans use to denote a version, or is there something software/config/upgrade wise that is significant to denote an LTS?
[21:28] <purana> DrkShdw: how old of a release?
[21:29] <DrkShdw> It started as jaunty. I've successfully upgrade the vm to karmic which is where it's at currently.
[21:29] <purana> DrkShdw, maybe send us the lsb_release -a output from old box so we know how old
[21:30] <DrkShdw> next upgrade would by lucid,  which if I understand correctly is an LTS which I can then upgrade later directly to precise.
[21:31] <purana> DrkShdw, I think your strategy is a good one
[21:31] <purana> DrkShdw, not had loads of experience with the upgrade hops you say, so will be interested to see how you go..
[21:31] <DrkShdw> so, thee is nothing config-wise I'd need to do,  to go from a non-lts to an lts?  it's just a human naming convention?
[21:33] <DrkShdw> it just kinda stinks I have to do 5 upgrades in a VM,  and then do those 5 upgrades again on the actual machine (jaunty -> karmic -> lucid -> precise > trusty)
[21:33] <purana> DrkShdw, i'd rather do the test on the vm vs the real box
[21:33] <DrkShdw> absolutely.  hehe
[21:34] <purana> DrkShdw, at least you will have confidence it will work
[21:34] <DrkShdw> mostly.  not entirely. but thats why I have backups.
[21:34] <purana> DrkShdw, image if you just did it and it broke, the workload the box does could be important so goes a weekend fixing it
[21:46] <ESphynx> hey guys why did the mouse sensitivity suddenly jumped super-high after I updated?
[21:47] <ESphynx> it's annoyingly high yet the setting has pointer speed at the slowest setting
[21:47] <purana> I've got no sound, something I think I need to fix ;)
[21:47] <DrkShdw> purana: I just finished the reboot after upgrading to lynx.   lsb_release -a nor cat /etc/issue seem to indicate LTS
[21:47] <teaearlgraycold> Is it possible to use my Ubuntu laptop as a wireless adapter for my desktop?
[21:48] <bekks> DrkShdw: Whats the output of those commands?
[21:48] <DrkShdw> hold on, I'm ahead of myself.   this was the upgrade to karmic.  not lynx.  looked at the wrong line on my paperwork.
[21:49] <bekks> DrkShdw: karmic?!
[21:49] <DrkShdw> yes
[21:50] <bekks> !karmic
[21:50] <bubbasaures> ESphynx, Have you modified any configs, you can to change this.
[21:50] <DrkShdw> bekks: I'm aware.  see my conversation may ~8 lines above.
[21:50] <ESphynx> bubbasaures I have not
[21:50] <DrkShdw> s/may/maybe/
[21:51] <bekks> DrkShdw: So you finished the update to lynx - ands whats the output of the commands you posted?
[21:51] <brent> !paste
[21:51] <DrkShdw> no, I just finished the update to karmic.  I had gotten ahead of myself.  I'm about to start the upgrade to lynx.
[21:52] <bekks> DrkShdw: I guess reinstalling a current 14.04 will be the quickest solution.
[21:52] <carbon13> teaearlgraycold, yes ... you must route ip traffic from wlan0 to eth0
[21:52] <DrkShdw> bekks: that's not really an option right now.   I'm doing the 5 upgrades to trusty.
[21:53] <teaearlgraycold> carbon13, thanks. I actually found that just now and I'm setting up iptables
[21:53] <DrkShdw> bekks: if reinstalling was an option,  we're a RHEL shop.  I'd be migrating it to RHEL instead of going to trusty :P
[21:54] <bekks> DrkShdw: RHEL has entirely nothing to do with it.
[21:54] <DrkShdw> context is key, man.
[21:54] <bekks> DrkShdw: I dont see any context involving RHEL. :)
[21:55] <bekks> However, good luck.
[21:55] <DrkShdw> the point was: reinstalling isn't currently an option.  if it were, I wouldn't even be in the channel, as we'd be moving it to RHEL.
[21:55] <popey> DrkShdw: hang on, why are you doing so many upgrades?
[21:55] <popey> DrkShdw: oh, read back, i see
[21:55] <bekks> DrkShdw: Why isnt reinstalling an option? Just for the sake of it, or is there a technical reason?
[21:55] <DrkShdw> popey: recently inherited an old EOL machine.  trying to get it to a supported version
[21:55] <popey> I'd start fresh and migrate over
[21:55] <popey> rather than re-install over the top
[21:56] <popey> create a new vm, keep old machine running, and migrate services over to new install
[21:56] <popey> that way you get new goodness and keep old machine for reference
[21:56] <popey> and don't have the pain of upgrades
[21:56] <DrkShdw> bekks: I can't have an hour long outage,  and the machine is in a remote part of the world.  hands-on will be difficult.
[21:57] <popey> Well the fact of the matter is someone neglected this server, and you're unfortunately picking up the pieces of that neglect
[21:57] <bekks> DrkShdw: Your services are down for far more than an hour when doing 5 upgrades.
[21:57] <DrkShdw> correct, I'm not disputing that.
[21:57] <DrkShdw> bekks: so far,  they've been down for the length of the reboot.
[21:58] <teaearlgraycold> carbon13, I've ran these command but without any luck: http://pastebin.com/E3zN3Rka
[21:59] <teaearlgraycold> The lights on the ethernet ports are blinking and the other machine is getting some kind of partial connection but no IP
[21:59] <bubbasaures> ESphynx, you can mess with dconf not sure the same control in in the regular gui, http://askubuntu.com/questions/254847/how-do-i-adjust-the-pointer-speed-and-scrolling-speed-of-a-trackpad   There is a config though I am not remembering it however
[21:59] <bubbasaures> is*
[22:01] <carbon13> tear
[22:01] <carbon13> tear
[22:01] <teaearlgraycold> What
[22:01] <carbon13> teaearlgraycold, what is the setup of wlan0?
[22:02] <teaearlgraycold> What do you mean?
[22:02] <teaearlgraycold> It's connected to a router
[22:02] <teaearlgraycold> The laptop's wifi connection seems unaffected
[22:02] <carbon13> type 'ifconfig -a' in the console
[22:03] <teaearlgraycold> carbon13, http://pastebin.com/4TMXDDMx
[22:04] <carbon13> ok ... to summarize
[22:06] <carbon13> 192.168.1.1 (router) -> 192.168.1.3 (wlan0) -!-> 192.168.0.x (eth0) -> 192.168.0.y (PC)
[22:06] <Guido1> Hello, I have some trouble with syncronising my apod nano 5G. If I add music to my ipod mini, everything works. If I do the same with the nano the music is copied, but the ipod doesn't see the music (using xubuntu 14.04)
[22:07] <carbon13> teaearlgraycold, that's it?
[22:07] <teaearlgraycold> carbon13, well the PC has no IP address at all right now. So your -!> symbol means that the bridge is broken?
[22:07] <teaearlgraycold> That's the structure though yeah
[22:07] <bekks> 12Most likely the wifi driver isnt capable of bridging.
[22:07] <bekks> So you would have to setup a router.
[22:08] <carbon13> teaearlgraycold, you must assign an IP to your pc
[22:09] <carbon13> otherwise the route is broken
[22:09] <teaearlgraycold> carbon13, do I need to do that manually?
[22:09] <teaearlgraycold> So do I just punch in a static IP to the PC?
[22:09] <carbon13> teaearlgraycold, safest bet to do it manually
[22:09] <carbon13> tear
[22:09] <carbon13> teaearlgraycold, yes ...
[22:11] <Nectar_> Hi. I've noticed that there are a number of themes in the ubuntu 'usr/share/themes/' folder but in the ubuntu 'Apperence' setting it only lists the three. Whats all this about?
[22:13] <Nectar_> i also extracted a theme i wanted to use in there
[22:13] <teaearlgraycold> carbon13, okay I gave it the ip 192.168.0.5 with the subnet mask at 255.255.255.0 and gateway at 192.168.0.1. The machine claims it has 192.168.0.5 as its IP but can not ping 192.168.0.1 and has no internet connection
[22:14] <teaearlgraycold> It gets a response from 192.168.0.5 saying the host is unreachable
[22:14] <carbon13> teaearlgraycold, which IP has eth0 of your notebook?
[22:15] <carbon13> teaearlgraycold, hmm .. sure that eth0 of your pc is up and running? (type 'ifconfig -a')
[22:15] <teaearlgraycold> carbon13, oh. That doesn't have an IPv4 address. I guess I should give that 192.168.0.1 as a static IP?
[22:15] <carbon13> teaearlgraycold, yes ... static ip is better
[22:16] <carbon13> teaearlgraycold, otherwise you have trouble with setting up dhcp on your notebook
[22:17] <carbon13> teaearlgraycold, you might try also to "bridge" the pc with the router using the same network like 192.168.1.x
[22:18] <carbon13> teaearlgraycold, but you must then block the IP 192.168.1.x at your routers dhcp
[22:18] <basketballll> bekks: whoopsie : Depends: libwhoopsie0 (= 0.2.39) but 0.2.39ubuntu0.1 is to be installed
[22:19] <bekks> basketballll: I dont have any context on what you are doing there :)
[22:19] <basketballll> sudo apt-get autoremove
[22:21] <teaearlgraycold> carbon13, okay now I can ping my laptop from my desktop
[22:21] <teaearlgraycold> 192.168.0.1 is reachable
[22:21] <carbon13> teaearlgraycold, great ;-)
[22:21] <basketballll> The following packages have unmet dependencies:  whoopsie : Depends: libwhoopsie0 (= 0.2.39) but 0.2.39ubuntu0.1 is to be installed
[22:22] <Guido1> Hello, I have some trouble with syncronising my ipod nano 5G with rhythembox. If I add music to my ipod mini, everything works. If I do the same with the nano the music is copied, but the ipod doesn't see the music (using xubuntu 14.04). Can someone help me?
[22:22] <basketballll> ???????? please
[22:23] <OerHeks> basketballll, run updates first, before you install anything.
[22:23] <teaearlgraycold> carbon13, but my router 192.168.1.1 isn't reachable yet
[22:23] <teaearlgraycold> Request times out
[22:25] <carbon13> teaearlgraycold, probably the problem is the routing /iptables... can the pc ping the wlan0 of the notebook?
[22:25] <xertownik> ktoś z pl??
[22:26] <carbon13> xertownik, only english please ...
[22:26] <xertownik> ok
[22:26] <basketballll> OerHeks:  when trying to install spotify and yes i ran updates http://paste.ubuntu.com/9583904/
[22:26] <teaearlgraycold> Seems like my laptop can't connect to the internet when my desktop can connect to my laptop
[22:26] <xertownik> so is someone from poland?
[22:27] <teaearlgraycold> http://pastebin.com/HTeaV9mD my interfaces
[22:27] <carbon13> teaearlgraycold, in other words: the routing is fcked up ;-)
[22:27] <teaearlgraycold> I got it from ubuntu.com IIRC
[22:27] <teaearlgraycold> So I'd expect it to work
[22:29] <OerHeks> basketballll, E: Unmet dependencies. Try 'apt-get -f install ?
[22:29] <teaearlgraycold> I think I'm going to give up on this
[22:30] <OerHeks> basketballll, what guide do you follow , what download etc?
[22:30] <bekks> !pl | xertownik
[22:32] <acovrig> I'm planning on building a budge media center, has anyone successfully gotten this (http://www.newegg.com/Product/Product.aspx?Item=N82E16815116028) to work on ubuntu (I'm thinking XBMC?), I will be running ubuntu 14.10
[22:32] <basketballll> OerHeks: http://howtoubuntu.org/how-to-install-spotify-in-ubuntu
[22:32] <ryoga1> It's really weird. In Ubuntu 14.04 I can't get eth0 to show up in ifconfig. (Only lo shows up).
[22:32] <ryoga1> lshw -C network shows both devices though.
[22:33] <carbon13> teaearlgraycold, if you're using ubuntu: have you tried this: http://www.howtogeek.com/116409/how-to-turn-your-ubuntu-laptop-into-a-wireless-access-point/?PageSpeed=noscript?
[22:33] <carbon13> http://www.howtogeek.com/116409/how-to-turn-your-ubuntu-laptop-into-a-wireless-access-point/?PageSpeed=noscript
[22:33] <bekks> ryoga1: Does it show up in ifconfig -a ?
[22:33] <ryoga1> no.
[22:33] <purana> ryogal: dmesg | grep eth
[22:33] <ryoga1> purana: nothing shows up.
[22:34] <basketballll> OerHeks:  this is what happens when i run apt-get -f install
[22:35] <OerHeks> basketballll, i don't know, maybe you need an other package from http://repository.spotify.com/pool/non-free/s/spotify/
[22:35] <basketballll> OerHeks:  what are the commands to undo all that
[22:36] <bekks> ryoga1: Whats the output of "lshw -C net" then?
[22:36] <OerHeks> basketballll, it didn't install
[22:37] <basketballll> sudo: unable to resolve host harris-HP-Pavilion-dv6000-RP296UA-ABA
[22:37] <ryoga1> bekks: Do you look for anything in paticular, or should I just type it all?
[22:38] <bekks> ryoga1: I am just curious which network adapter you have :)
[22:38] <ryoga1> bekks: No problem :) the problem is, I'm logged in via the recovery thing of ubuntu, so I can't easily copy and paste.
[22:38] <ryoga1> It basically shows the AR9285 wireless network adapter and the AR9285 gigabit ethernet.
[22:39] <carbon13> teaearlgraycold, try https://help.ubuntu.com/community/Router
[22:40] <ryoga1> bekks: The only configuration seen is "latency=0" anything else is just hardware information.
[22:40] <bekks> ryoga1: The AR9285 is a wifi adapter, and no gigabit, for sure.
[22:41] <ryoga1> bekks: Oh sorry, AR8131 is the ethernet adapter
[22:41] <bekks> ryoga1: http://askubuntu.com/questions/105607/how-do-i-get-an-atheros-ar8131-ethernet-card-working
[22:42] <ryoga1> bekks: Thanks! Okay, I'll try that now :)!
[22:44] <ryoga1> bekks: Just for the record, my problem stems from the fact, that the upgrade from Ubuntu 12.04 to 14.04 crashed, and now I try to finish the upgrade after a reboot but it won't let me connect to the web.
[22:47] <almostgrownyouth> hello
[22:49] <almostgrownyouth> has anyone (hopefully just) a few minutes to help me with a problem with encypted disks? i googled for hours so you're my last resort before giving up -.-
[22:49] <guntbert> !ask | almostgrownyouth
[22:50] <almostgrownyouth> ok, so, i encrypted a not used laptop months ago, never used it and naturally forgot my password. now, there isn't anything on it with value, i just need to know how to re-install ubuntu without knowing the diskpass
[22:51] <bekks> almostgrownyouth: Insert the install cd, and install Ubuntu.
[22:52] <almostgrownyouth> as strange as it sounds, i could not find any information on google. probably just googled the wrong stuff and a hint in te right direction would already be enough.
[22:52] <badcom> Hi guys. When I SSH my Ubuntu 14.04, it shows that there are 76 packages that can be updated and 43 are security updates. How do I update only the security ones via command line?
[22:52] <almostgrownyouth> no, rebooting from a livecd/drive is not working, i end up always at the point where i have to unlock the disk first
[22:53] <bekks> almostgrownyouth: You dont have to unlock anything when just reinstalling. Do not boot from the harddisk :)
[22:53] <almostgrownyouth> hm
[22:54] <raf> !list
[22:58] <almostgrownyouth> bekks: when i try to boot from the usb-drive (choose the conected drive in the bios as bootdevice) i still end up at the grub-menu, where i only can choose the already existing partition, followed by cryptsetup. does that mean thet either my usb-drive is not working or bios is ignoring the usb-ports?
[22:58] <bekks> almostgrownyouth: Correct. Your USB doesnt boot.
[22:59] <almostgrownyouth> ok, thanks. i feel pretty dumb. i almost ripped the harddrive out of the laptop ;)
[23:03] <almostgrownyouth> by guys, thanks for the help
[23:05] <Nectar_> Im trying to install a theme on Unity Tweak Tool but it only changes the colour scheme not the full theme; minimize, close buttons etc. Whats the problem?
[23:06] <Nectar_> ive tried different themes, only the defualt ones work
[23:06] <Nectar_> they end up all looking high contrast
[23:09] <adsads> hi
[23:09] <adsads> i needh elp
[23:09] <adsads> HELp
[23:10] <adsads> HELP
[23:27] <marlon> marlon
[23:31] <BlueProtoman> Help!  I can't push to a remote git repository on Ubuntu 14.10!  I get this error: "git-remote-https: symbol lookup error: /usr/lib/x86_64-linux-gnu/libhogweed.so.2: undefined symbol: __gmpn_cnd_add_n"  Any tips?
[23:31] <Quitta> Hi after updating my ubuntu from 12.04 to 14.04, after rebooting I got an error of the form 'end_request: I/O error, dev sdg, sector' which keeps repeating. I booted with a live cd and performed sudo badblocks -sv /dev/sda5 and which returns Pass completed, 8 bad blocks found. (8/0/0 errors).. I have no idea what I should do next.. Anyone got more experience with this?
[23:32] <bekks> Quitta: You should not use that disk anymore, ensure you have a current backup, and get a new disk.
[23:32] <bekks> That disk is going to die very soon.
[23:33] <Quitta> Thats not really an option, I already have a backup
[23:33] <bekks> That is your only option.
[23:33] <Quitta> but I want to use it for those few days that I have left
[23:33] <Quitta> its not temp fixable
[23:33] <Quitta> ?
[23:33] <bekks> Quitta: No.
[23:34] <Quitta> since it happened after an upgrade which is pretty weird,no?
[23:34] <Guido1> Hello, I have some trouble with syncronising my ipod nano 5G with rhythembox. If I add music to my ipod mini, everything works. If I do the same with the nano the music is copied, but the ipod doesn't see the music (using xubuntu 14.04). Can someone help me? please
[23:34] <Quitta> And I can still access it without problems with my live cd
[23:34] <bekks> Quitta: No, the disk is just going to die.
[23:35] <Quitta> I cant stretch it for a few more days/weeks?
[23:36] <bekks> Quitta: No.
[23:37] <basketballll> Errors were encountered while processing:  /var/cache/apt/archives/whoopsie_0.2.39ubuntu0.1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
[23:37] <basketballll> You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies:  whoopsie : Depends: libwhoopsie0 (= 0.2.39) but 0.2.39ubuntu0.1 is installed E: Unmet dependencies. Try using -f.
[23:38] <Quitta> ok then :S ty bekks
[23:38] <Quitta> ah
[23:39] <basketballll> OerHeks: ???
[23:40] <Quitta> but bekks. the weird thing is that Im using dual boot on the same drive. But I dont experience any problems on my windows OS, only ubuntu wont boot
[23:40] <Quitta> How could you explain that?
[23:41] <rosaecaeruleae> how do I "install" a picture as booting screen when turing on my machine?
[23:42] <basketballll> anyone
[23:48] <OerHeks> basketballll, if apt-get -f install does not fix, contact the spotify maintainer, as it is not an ubuntu issue
[23:48] <darkad> Hi all, I got a problem with my laptop hard disk, its led on laptop often turns on, as on read/write operations, although there is no process that does a write o read operation on hard disk. May you help me?
[23:49] <bekks> darkad: Why are you concerned about that?
[23:49] <basketballll> OerHeks:  it isnt spotify
[23:49] <basketballll> i am using uck
[23:49] <Bashing-om> rosaecaeruleae: Easy to do for boot background contained in : https://help.ubuntu.com/community/MaintenanceFreeCustomGrub2Screen .
[23:49] <OerHeks> basketballll, looks like your pastebin http://paste.ubuntu.com/9583904/ ???
[23:50] <darkad> bekks it's a fresh install and it never happened in any other machine
[23:50] <basketballll> OerHeks:  i am going to try something else how do i install this https://github.com/clearkimura/Customizer
[23:50] <OerHeks> basketballll, so uck is giving this issue?
[23:50] <basketballll> yes
[23:50] <OerHeks> why do we need to ask these important details ?
[23:51] <darkad> I tried the WD test software to scan for any physical problem but the disk seems to be healthy
[23:52] <mojtaba> Hi, I know how to extract geotags of the image using exiftool. Do you know how can I convert them to the location name? (ultimately I want to rename the image file based on the location.)
[23:52] <lagbox> anyone know anything about a memory leak with xorg and fglrx  14.10
[23:52] <bekks> darkad: It did happen, but you just didnt notice it. Most likely, the buffer or I/O cache is accessing the disk, which is nothing to worry about.
[23:52] <bekks> lagbox: What if someone does? :)
[23:52] <lagbox> bekks, would be insightful :)
[23:52] <bekks> lagbox: I bet someone does, then.
[23:53] <bekks> lagbox: But maybe you want to ask a specific question? :)
[23:53] <basketballll> OerHeks: yes
[23:53] <lagbox> yea how do i stop xorg from leaking memory constantly every day and causing me to have to restart X
[23:54] <basketballll> OerHeks:  i just want to make a live cd with my programs preinstalled why is this so hard
[23:54] <darkad> bekks thank you
[23:56] <mojtaba> Hi, I know how to extract geotags of the image using exiftool. Do you know how can I convert them to the location name? (ultimately I want to rename the image file based on the location.)
[23:57] <basketballll> OerHeks: ??
[23:58] <lagbox> i will just reinstall and see if it fixes it .... i upgraded the day 14.10 came out and have nothing but issues since
[23:58] <Guido1> someone?
[23:58] <xavi> i added atl1c to /etc/modprobe.d/blacklist.conf but it's still being loaded, how do i blacklist it so alx loads?
[23:59] <OerHeks> basketballll, i dont know, ask the room about uck + spotify, maybe better askubuntu or forum if you don't find an answer here