=== martinst is now known as martins-afk === markthomas|away is now known as markthomas === markthomas is now known as markthomas|away [01:06] anyway to recover data from a raid5 lun /dev/sdb .. it says Disk /dev/sdb doesn't contain a valid partition table [01:09] fdisk /dev/sdb says http://dpaste.com/18JVV0Y .. any chance to get old data back? [01:19] are you sure it *ever* had a partition table? [01:19] and what do you mean by recover data from raid5 lun /dev/sdb [01:19] you don't need that disk at all to recover a raid5 [01:20] Patrickdk: yes.. I had to replace two of the failed disks using the megacli gui and brought it back up .. so most likely no chance to recover data.. but I wanted to double check here [01:20] megacli? [01:21] if your using a raid card [01:21] you will have to use the raidcard to recover the data [01:21] LSI megaraid controller made that /dev/sdb raid5 run [01:21] lun* [01:21] that is your problem [01:21] you didn't add it into the raid [01:21] but as soon as the raid card sees 2 bad disks, your raid5 is toast [01:22] Patrickdk: that is what I thought.. it moved the /dev/sdb offline [01:22] and no, there should NOT be any partitions on that disk [01:22] because raid5 lun /dev/sdb is rebuilt? [01:23] rebuilt being replaced two bad disks.. so theoretically no need to try to recover .. right? [01:23] no [01:23] cause what do partitions have to do with the raid card making a raid? [01:23] partitions are a user concept [01:24] Patrickdk: ok so I guess I could just use that /dev/sdb to create a new pv [01:24] and then a vg and lv [01:27] pvcreate /dev/sdb; vgcreate volg0 /dev/sdb; but it shows the whole disk is free.. It should have 87% full.. I guess data is gone.. no problem.. wanted to make sure I tried everything === markthomas|away is now known as markthomas === markthomas is now known as markthomas|away === kickinz1 is now known as kickinz1|afk === zz_DenBeiren is now known as DenBeiren === Lcawte is now known as Lcawte|Away [05:07] Hi all .. know this' a Wordpress "Q" but they are silent tonight .. my recent install is giving me a 403 error when I try to open my uploads directory via the www (http://www.openlug.com/wp-content/uploads/) .. I've went so far as to 777 the directory with the same error .. help? Ideas? (Yes, www-data owns user/gid and it is currently at 777) === kickinz1|afk is now known as kickinz1 === markthomas|away is now known as markthomas [08:15] pmatulis well === rcj is now known as Guest33360 [08:15] I installed ubuntu-server and it was working fine [08:15] except I cannot detect new drives [08:16] just the hardware raid5 [08:16] which appears as a single disk [08:16] so I tried to convert my boot from legacy to efi [08:17] as far as I can tell, grub2 installed fine without errors. owever I cannot boot through efi === bilde2910|away is now known as bilde2910 [09:06] Good morning. === arcsky_ is now known as arcsky [09:47] http://dpaste.com/26S809Z <-- can anybody help with why i keep getting 403s when i run update or try to install anything? === Lcawte|Away is now known as Lcawte [10:00] jargon: try the same URLs in a browser... [11:21] I just installed SLiM and i3 on my Ubuntu Server 14.04 and tried setting the screen resolution with xrandr but every time I reboot, it's reverted back to 1024x768. Also, LVDS1 seems to be enabled by default. How do I fix this? [11:26] NoobsFlyVFR: sounds like you have a graphical environment [11:26] I do, I installed i3-wm and SLiM. [11:26] pmatulis, also, my xorg.conf seems to regenerate every time I reboot. [11:29] NoobsFlyVFR: i think #ubuntu would be a more suitable channel for your questions. this is #ubuntu-server [11:29] Thanks, pmatulis. === Guest33360 is now known as rcj === rcj is now known as Guest49948 === martins-afk is now known as martinst === pgraner-hol is now known as pgraner [14:39] hallyn: should i mark bug 1414153 as fixed released since its in vivid already? [14:44] arges: huh. why did it not get auto-closed? [14:44] hallyn: not sure [14:45] i marked the wrong bug in changelog? [14:46] arges: yeah i marked hte wrong bug in changelog. so yeah pls do mark it closed [14:46] hallyn: ok [14:51] * hallyn fixes it in git for now [16:12] is there a linux command to which I can pipe columns of data that will generate a nice line graph and output it as a png fileÉ [16:12] ?* [16:29] bananapie: yes [17:57] W: Failed to fetch bzip2:/var/lib/apt/lists/partial/mirrors.digitalocean.com_ubuntu_dists_trusty-updates_universe_i18n_Translation-en Hash Sum mismatch [17:57] halp === Underbyte is now known as geekotron [18:24] use another mirror ? === danjared_ is now known as danjared === Lcawte is now known as Lcawte|Away === Lcawte|Away is now known as Lcawte === _thumper_ is now known as thumper === pgraner is now known as pgraner-afk === bilde2910 is now known as bilde2910|away === thumper is now known as thumper-dogwalk [22:57] question, I have started up an ubuntu server and looking to connect it using the wireless card and can't get it to connect to the router [22:57] would anyone know of how to do this or have a resource they can point me to [22:58] I've tried this http://askubuntu.com/questions/270901/ubuntu-server-12-04-2-wireless-connections [23:18] stormpython: pastebin your /etc/network/interfaces, someone might spot something wrong [23:22] sarnold: http://pastebin.com/TxkPDfwZ [23:26] stormpython: (wild guess) try "allow-hotplug" instead of "auto" for wlan0 [23:38] sarnold: thanks, but didn't get it working [23:38] stormpython: dang. :/ === martinst is now known as martins-afk === thumper-dogwalk is now known as thumper