[00:03] <Whiskey> -_-
[00:03] <Whiskey> it has to be "*-Old" and not "*-NewOld" killall
[00:07] <daemon_erebus> can anyone tell me how to auto-generate the menu in openbox ?
[00:08] <pavlos> Whiskey, so your match pattern is dash Old, since dash is special you need to escape it so the command becomes ps -ef | grep "\-Old"
[00:20] <xikito> algum brasileiro por aí ???
[00:21] <pavlos> !br | xikito
[00:26] <leonardo_agui> hi new to ubuntu and I just needed to know how to mount a usb key thanks
[00:26] <Mike321> EriC^^: ok bud, i installed from the minimal disc and the installation worked fine but when i boot from the computer now it doesnt even send a signal to my monitor.
[00:27] <k1l_> leonardo_agui: on a desktop that should work just when putting it in
[00:27] <leonardo_agui> thanks ill try a different usb port
[00:27] <k1l_> leonardo_agui: see "dmesg" if there is a hardware issue
[00:29] <Tinche> leonardo_agui, you can also try using the 'Disks' application (search for it in the dash) to see what's going on, and mount the usb key partition
[00:29] <Mike321> EriC^^: just realized that even though i chose desktop it installed the server edition, running apt-get install ubuntu-gnome-desktop
[00:30] <Mike321> ping EriC^^
[00:35] <leonardo_agui> Thank you seems it cant read the disks format as it is recognized by ubuntu
[00:35] <k1l_> leonardo_agui: what is this disk?
[00:35] <redemptionsong> Has anyone seen a mysterious file named list.htm on their computer. In: $ pwd
[00:35] <redemptionsong> /home/me/Downloads/internet   I have this file. Pasted content : http://paste.ubuntu.com/10299016/
[00:35] <redemptionsong> Is this something I should pursue? Or not worry about? Any info on this file? Cause I really, strongly, don't think I dl that of my own volition.
[00:37] <daftykins> redemptionsong: maybe you hit ok to download something without noticing and forgot about it
[00:37] <daftykins> who knows
[00:39] <redemptionsong> daftykins: Seacching one of the items in the file's content (googling it) I see AtheOS come up. I did check out AtheOS recently so perhaps you're right. No worries  :>
[00:39] <daftykins> ^_^
[00:40] <genii> redemptionsong: Seeing as www.erhuveno.info doesn't even resolve and has no whois entries, it's probably nothing to get overly concerned about
[00:40] <Mike321> ok guys, i was having trouble installing 14.04 so i used the minimal iso. it installed the server edition even though i selected pc version. have already run apt-get install ubuntu-gnome-desktop, what else do i have to do to make this a desktop os?
[00:41] <forever_lucas> Using f-irc lol
[00:41] <forever_lucas> From SSH
[00:42] <forever_lucas> ls
[00:43] <redemptionsong> genii:I think I figured it out.  googling "luckelejg16" (with quotes - which happens to be one of the items in the content of that pasted file), see second entry "AtheOS" the seach result reveals not jsut the searched term but numerous maching (ie: identical) entries to the content of the pasted file.
[00:43] <redemptionsong> Hope that wasn't written too confusing :>
[00:44] <daftykins> don't worry, he's a geniius
[00:44] <redemptionsong> genii: Hah! What you said reminded me just precisely where that file came from. When you try to dl AtheOS the link is broken and won't resolve. I bet that's it.
[00:46] <EriC^^> Mike321: ok
[00:46] <digilink> hi... running Ubuntu server 14.04 and need to make persistent entries in /etc/resolv.conf I edited /etc/resolvconf/resolv.conf.d to include my changes but they dont appear to be taking effect. Is there something else I need to edit?
[00:46] <daftykins> digilink: easier way to make life simple: purge the package 'resolvconf', reboot, then hardcode resolv.conf - job done
[00:46] <Mike321> EriC^^:  so after this LOOOONG instalation is finished what else must i do to make this a desktop version?
[00:47] <digilink>  daftykins: lol... good idea ;)
[00:47] <EriC^^> are you sure it installed the server? kind of odd
[00:48] <daftykins> EriC^^: Mike321 i think someone failed their tasksel choice on picking desktop, is what it is.
[00:48] <daftykins> by 'server' you just mean it installed without X and a DE
[00:50] <Mike321> EriC^^:  when it booted from computer there was no signal to the monitor,  i held the ctrl+alt+f1 an it gave command line. i rebooted to the same issue. i then ran sudo apt-get install ubuntu-gnome-desktop which is still running. and daftykins when prompted i selected ubuntu gnome desktop
[00:50] <EriC^^> Mike321: that doesn't mean it didn't install the desktop, as you have graphics driver issues it will boot to the blank screen
[00:50] <daftykins> yeah so that's not actually it not working, that's it having an *issue*
[00:51] <Mike321> EriC^^: daftykins ok so after it finally finishes with this set up for gnome desktop what should i proceed to do?
[00:51] <EriC^^> Mike321: did it ask you which de to install while you were installing?
[00:51] <EriC^^> Mike321: install the nvidia-195 driver
[00:52] <EriC^^> it's the one you were running with 10.04
[00:52] <Mike321> EriC^^:  yes it gave me a long list including server, lubuntu, kubuntu etc of which i chose ubuntu gnome
[00:52] <craigbass76> Is there a way to test what kinds of usb ports I have on this computer?  I'm trying to get a plantronics wireless headset working, and every time I plug it in, the mouse goes wonky.  I intermittently can't click on things.  I'm wondering if I need USB3 and all I have is USB2.
[00:52] <EriC^^> craigbass76: lsusb
[00:53] <craigbass76> EriC^^, I tried that, and all I see are entries saying 1.1 or 2.  I'm up the creek?
[00:53] <daftykins> a headset needing USB 3 is a big no no.
[00:53] <EriC^^> Mike321: ok, try to sudo apt-get update && sudo apt-get dist-upgrade
[00:54] <EriC^^> craigbass76: does it say 2.0 root hub or 3.0 root hub?
[00:54] <Mike321> EriC^^: daftykins  ok so assuming that the graphics card created an issue which booted me with no monitor output and i then ran the apt get to install gnome desktop what do i need to do once i get the driver running becasue it seems to me as id have multiple desktop files
[00:54] <craigbass76> daftykins, maybe that's not the case, but I remember it only worked in one of the ports on the windows laptop I sent back to my employer after getting laid off.  I never dug into it, but suspected that was a 3 port.
[00:54] <daftykins> craigbass76: well, if you look in the connecter and it doesn't even have USB 3 pins, that's a sure sign that's wrong
[00:54] <Mike321> EriC^^: and ok, as soon as its done"setting up" from the desktop apt-get
[00:55] <EriC^^> Mike321:  once you install the driver just restart and it should work
[00:55] <Mike321> EriC^^: ok thanks again dude
[00:55] <EriC^^> no problem
[00:56] <volga629> Hello Everyone, I have question about lightdm and RSA secure id integration. I got working pam_securid.so with ldap and pam, but when it prompt for login  it should ask instead of "enter password" "enter passcode" is anybody have experience with kind of case ?
[01:00] <Guest27144> I am facing (false?) overheating issue. My laptop is HP Envy (link http://www.officedepot.com/a/products/458069/HP-ENVY-Laptop-Computer-With-156/) running Ubuntu 14.04.02 LTS 64 bit dual booted with Windows 8.1.
[01:00] <Guest27144> I have ran many more heavier processes simultaneously on Windows and nothing ever happened. But Ubuntu shuts down abruptly even on half the load. I even tried changing CPU Governor from ondemand to powersave. Didn't help.
[01:00] <craigbass76> daftykins, I only see the four "pins," so I guess it isn't 3 after all.  I guess the next question is who's gotten one of these things to work, but I'll google a while yet...
[01:00] <daftykins> sounds like a plan.
[01:00] <Guest27144> And on restart the boot screen shows that the laptop was turned off due to overheating
[01:02] <EriC^^> Guest27144: did you install psensors to check the temperature?
[01:02] <EriC^^> Guest27144: also does top show any processes consuming way too much cpu?
[01:03] <deepblue> oiu
[01:03] <deepblue> wassup peo-ple
[01:03] <deepblue> nted
[01:03] <Guest27144> EriC^^: I installed sensors
[01:03] <Guest37624> can i use this clinet to chat with people in other irc rooms?
[01:04] <EriC^^> Guest37624: yes
[01:04] <Mike321> EriC^^: unable to locate package nvidia-195
[01:04] <Guest27144> EriC^^: the outpit of sensors is http://pastebin.com/grMPLALq
[01:04] <EriC^^> Mike321: the link i showed you earlier said 173 seems to work, but it has issues with coming back from suspend
[01:05] <Mike321> EriC^^: as well as unable to locate package dist-upgrade
[01:05] <EriC^^> Mike321: you could try installing the latest nvidia binaries
[01:05] <EriC^^> Mike321: sudo apt-get dist-upgrade
[01:06] <Guest27144> EriC^^: currently top look normal
[01:06] <Mike321> EriC^^: 0 installed 0 to remove and 0 not upgraded from dist-upgrade
[01:06] <EriC^^> Mike321: did you run sudo apt-get update before it?
[01:07] <Guest27144> EriC^^: sometimes compiz climbs up sharply for a sec
[01:07] <EriC^^> ah nevermind, i guess since it's a minimalcd it installs the latest packages
[01:07] <EriC^^> Guest27144: does sensors show that the cpu is in fact overheating?
[01:07] <Mike321> EriC^^: package nvidia-173 is not available but is referred to by another package this may mean the package is missing, has been removed or is only available from another source
[01:08] <EriC^^> !info nvidia-173
[01:09] <Guest27144> EriC^^: Actually, whenever I check, its below the high mark. But as it shutdowns abruptly at times, I dont get any time to check just before that
[01:09] <Guest27144> EriC^^: the sensors I mean
[01:09] <EriC^^> Mike321: can you paste lspci | grep VGA again?
[01:10] <Mike321> EriC^^: give me a sec, cant paste it have to type it into this machine by hand
[01:10] <Guest27144> EriC^^: could it be chrome? chrome seems to consume too much resources at times. I will stick to firefox
[01:10] <EriC^^> ok, just type model and number
[01:11] <EriC^^> Guest27144: you could try that, personally i find firefox sometimes turns into a blackhole for the cpu and usually ends in a kernel panic
[01:11] <Mike321> EriC^^:  rebotted after everything else ran and now im at blank screen and cant even get ctrl+alt+f1 to bring up prompt
[01:12] <EriC^^> Mike321: yikes
[01:12] <Mike321> EriC^^: rebooted and got grub up. what do i do now? lol
[01:13] <brx_> can i check internet traffic (if i didnt already have tcpdump/wireshark running)
[01:13] <EriC^^> Mike321: press e over the ubuntu entry and add nomodeset to the line with Linux vmlinuz... quiet splash
[01:13] <ali_> hi peiople
[01:13] <ali_> how r u
[01:13] <Guest27144> EriC^^: hmm... but most of the time it did shutdown abruptly, I had chrome running. Are there any logs I can check to know the exact reason?
[01:13] <aurorauser> can someone help me with the dd tool?
[01:13] <EriC^^> Guest27144: check /var/log/syslog maybe
[01:14] <Mike321> EriC^^: just type "nomodeset" in front of it?
[01:14] <EriC^^> Guest27144: try without using chrome
[01:14] <Guest27144> EriC^^: Yup
[01:14] <ali_> hi guys
[01:14] <EriC^^> Mike321: yeah, then press ctrl+x
[01:14] <pavlos> aurorauser, what's the question about dd
[01:14] <ali_> what are we talking about tonight
[01:14] <k1l_> !ot | ali_
[01:14] <ali_> ok
[01:14] <aurorauser> pavlos, I am trying to clone a SSD onto a HDD
[01:15] <aurorauser> and it seems like its not copying over the partition table correctly
[01:15] <Mike321> error:cany find command 'nomodeset'. unaligned pointer 0x8 aborted press any key to exit
[01:15] <EriC^^> aurorauser: what's the command you're using?
[01:15] <Mike321> EriC^^: cant*
[01:15] <EriC^^> Mike321: did you add it after quiet splash?
[01:15] <aurorauser> dd if=/dev/sdc | pv | dd of=/dev/sdd bs=512 conv=noerror,sync
[01:16] <Mike321> EriC^^: no i added it in the beginning of the script. thats what i asked and you said yeah then press ctrl+x trying again
[01:16] <daftykins> 512 byte block size is a bit pointless :)
[01:17] <EriC^^> Mike321: oh, i thought you said add it after it
[01:17] <aurorauser> well i tried 512 and 1M and same thing
[01:18] <Laravelnewbie> Hi guys
[01:18] <Mike321> EriC^^: ok im trying this again, it actuslly says "splash quiet" but im adding "nomodeset" after that correct?
[01:18] <Guest27144> EriC^^: I found this line the log  -->   [47485.592634] thermal thermal_zone0: critical temperature reached(128 C),shutting down
[01:18] <Laravelnewbie> I setup xrdp for the ten time,it still fails to work correctely.
[01:19] <EriC^^> Mike321: yes
[01:19] <aurorauser> Guest27144, sounds like an overheating issue, check the fans make sure they're working
[01:19] <daftykins> Guest27144: check for BIOS Updates for that machine
[01:19] <Laravelnewbie> can someone help me install it w/o experiencing furth issues
[01:19] <EriC^^> Guest27144: that's pretty high
[01:19] <Mike321> EriC^^: YES it worked. now how do i fix it so it boots into desktop everytime? or did i just do that?
[01:20] <Guest27144> daftykins: yup. Its updated. Had an windows update abt it a couple of weeks ago
[01:20] <EriC^^> Mike321: install the nvidia drivers
[01:20] <Guest27144> aurorauser: Yup. The fans are working. Can hear the sound.
[01:20] <daftykins> Mike321: did you tell us what model card it is yet? graphics card.
[01:20] <EriC^^> Mike321: no, that's only a one time thing
[01:20] <Laravelnewbie> No help :/
[01:20] <daftykins> Guest27144: Windows Update does not provide BIOSs
[01:21] <Mike321> EriC^^: nvidia-195? daftykins and how do i find that?
[01:21] <Guest27144> daftykins: sorry. It was through the HP Assistant
[01:21] <EriC^^> Mike321: lspci | grep VGA
[01:21] <daftykins> Mike321: like EriC^^ told you now and also earlier :)
[01:22] <Mike321> daftykins: ok then yea i posted that output but give me a sec to find terminal and ill post again, first time on 14.04 unfamiliar with layout
[01:22] <Guest27144> daftykins: I heard somewhere it might be an Intel Speedstep issue. Any idea where and how I can disable it?
[01:24] <daftykins> Guest27144: that makes no sense, try avoiding chrome for a bit, see if it's to blame
[01:24] <pavlos> aurorauser, not sure I follow the dd command you wrote, I know if=device of=device bs=1M && sync. What is that pipe pv you have?
[01:25] <Guest27144> daftykins: thanks. will let you know
[01:25] <Mike321> daftykins: EriC^^ 00:0d.0 VGA compatible controller: NVIDIA Corporation c61 [GeForce 6150SE nForce 430] (rev a2)
[01:25] <mulga_> hi guys, for some reason when i run software update it tells me i don't have enough free space. Only prob is  for some reason it's looking in /boot  for some reason. >>  pastebin
[01:25] <mulga_> http://paste.ubuntu.com/10299724/
[01:25] <Mike321> EriC^^: the "drivers install popped up with three options for nvidia, proprietary tested, open source, and proprietary
[01:25] <daftykins> aaaah 6150SE provided as part of an nforce chipset
[01:26] <mulga_> can't understand why it doesn't look at / instead
[01:26] <EriC^^> mulga_: it's probably trying to install a new kernel
[01:26] <EriC^^> mulga_: cause kernels go in /boot and you have a separate partition for it
[01:26] <EriC^^> mulga_: type dpkg -l | grep linux-image
[01:26] <daftykins> another victim of messy kernel filling :D
[01:26] <EriC^^> hehe
[01:27] <mulga_> EriC^^,: oh, ok. is see. thanks, i'll try that out now.
[01:27] <mulga_> daftykins: it this a prob since 14.04?
[01:27] <mulga_> haven't had this kind of problem before now.
[01:27] <EriC^^> Mike321: i'm not sure, but proprietary tested sounds like a winner
[01:28] <daftykins> mulga_: no this is someone having a small /boot in the past and upgrading, most installs these days don't do a separate /boot so we don't really see it
[01:28] <Mike321> daftykins: EriC^^ so software and updates gives me three options for drivers.nvidia legacy binary driver proprietary, tested. x.org x server nouveau display driver from xserver open source and the nvidia legacy binary again but it just says proprietery
[01:28] <EriC^^> Mike321: you could try the open source one if it's not already selected
[01:29] <daftykins> nouveau won't work on that 6150 onboard i don't think
[01:29] <EriC^^> daftykins: ^
[01:29] <daftykins> saw something similar the other day
[01:29] <Mike321> EriC^^: the open source ia already selected
[01:29] <daftykins> Mike321: try nvidia 304.
[01:29] <daftykins> so proprietary tested
[01:30] <Mike321> daftykins: they are both 304 one just says propreitary tested and the other says proprietary
[01:30] <Mike321> daftykins: ok
[01:31] <mulga_> really? OK. Then this would be partly due to this netbook  being preloaded with MS and then installing Linux? and then me not removing the partition maybe? Or maybe because i did have probs due to EUFI boot while installing ?
[01:31] <mulga_> EriC^^: ^^
[01:32] <daftykins> lets just focus on you fixing it, mulga_
[01:32] <daftykins> speak of the past won't help now :)
[01:32] <EriC^^> mulga_: next time just partition manually
[01:32] <mulga_> daftykins: sure, point taken, however knowing what actually caused the problem would ofc help prevent again in the future
[01:33] <mulga_> EriC^^: i see. ty
[01:33] <daftykins> mulga_: using a poor partition layout
[01:34] <daftykins> then running a distro for any length of time that keeps issuing new kernels, without sudo apt-get autoremove'ing the old ones
[01:34] <mulga_> daftykins: i see. thanks
[01:34] <mulga_> fresh install actually, but point taken
[01:34] <leonardo_agui> irssi
[01:36] <daftykins> mulga_: are you gonna show us the requested info then? what about: "sudo apt-get install pastebinit && ls -al /boot | pastebinit"
[01:36] <Mike321> EriC^^: daftykins ok guys. i originally came to the channel running 10.04 and trying to get my netgear a6100 wireless adapter to work. thats when everyone started me on the road to upgrade. now that im upgraded....... how do i get my wifi adapter to work?
[01:38] <mulga> ok output from ./dpkg -l | grep linux-image > http://paste.ubuntu.com/10299927/
[01:38] <EriC^^> is there anything in the additional drivers?
[01:38] <daftykins> ugh wireless. please say it's not a USB thing?
[01:39] <Mike321> EriC^^: daftykins nothing in additional drivers. and yes its usb
[01:39] <EriC^^> mulga: type uname -a
[01:39] <EriC^^> or just uname -r
[01:40] <mulga> ...right
[01:40] <mulga> Linux tASUS 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[01:41] <EriC^^> mulga: type sudo apt-get purge linux-image-3.13.0-{32,43}-generic
[01:41] <mulga> would backups be necessary for anyt of this?
[01:42] <mulga> *any
[01:42] <EriC^^> not if this kernel is running as you'd like
[01:42] <mulga> OK
[01:43] <BobbyJenkins> Hello, I am new to Linux, but I am trying to connect to connect to my school computers using a VPN connection, but I am having a tough time understanding how to install OpenVPN, as I am new to Linux
[01:44] <daftykins> !vpn
[01:44] <Mike321> EriC^^: daftykins anything?
[01:45] <daftykins> Mike321: sorry not up for it, it's my bedtime.
[01:45] <Mike321> daftykins: ok dude, thanks for the help you provided
[01:45] <daftykins> np!
[01:46] <KaZeR> hi there
[01:46] <BobbyJenkins> I looked at that article, but I was told to use OpenVPN
[01:46] <mulga> EriC^^, : ok, so thats about to free up some ~400MB...
[01:46] <mulga> almost done
[01:47] <EriC^^> Mike321: this seems promising http://ubuntuforums.org/showthread.php?t=2235778
[01:47] <EriC^^> give it a look
[01:47] <mulga> and as yo
[01:47] <EriC^^> mulga: ok
[01:47] <Mike321> EriC^^: already ran that. on 10.04 and now on 14.04 and no wireless
[01:48] <KaZeR> i am trying to install a bunch of servers using ubuntu 14.04 and preseed but it seems to be much more difficult than i would have expeced, especially for the partman part.
[01:48] <KaZeR> can someone help me ?
[01:48] <mulga> EriC^^,  and as im sure you know, this is doing something to my kernal img and /boot
[01:48] <mulga> removing i see
[01:48] <EriC^^> mulga: yup
[01:48] <mulga> EriC^^,  ok
[01:49] <EriC^^> mulga: after it's done the upgrade should work i guess
[01:49] <mulga> cool, will give it a go when done. thanks for your help, mate. much appreciated ;)
[01:49] <EriC^^> no problem :)
[01:50] <mulga> actually for some reason it was also doing something with virtual box, too?
[01:50] <Mike321> EriC^^: installing xchat on the nex system, coming in as Mike123
[01:50] <mulga> removing it seems
[01:50] <EriC^^> mulga: yeah that's normal, i think it's the dkms stuff
[01:50] <mulga> i see
[01:51] <EriC^^> Mike321: ok
[01:54] <mulga> EriC^^, : yup, that's fixed it. thanks again :)
[01:55] <EriC^^> you're welcome :)
[01:55] <hey_joe> so i have upgraded to MariaDB as a replacement to MySQL. I am having a lot of speed issues on my low end VPS. I notice a ton of mysqld processes running, even after issuing mysqladmin -u root -p shutdown
[01:55] <hey_joe> https://www.dropbox.com/s/34ocvbo5nu3fli1/Screenshot%202015-02-18%2019.54.33.png?dl=0
[01:56] <hey_joe> whats up with that?
[01:56] <hey_joe> i just want to kill them to confirm that MySQL is what is eating my resources
[01:57] <mike123> EriC^^ ok im back
[01:57] <EriC^^> ok
[01:57] <mike123> EriC^^ any other thought on the wireless?
[02:00] <EriC^^> mike123: try this maybe http://ubuntuforums.org/showthread.php?t=2228244
[02:03] <mike123> EriC^^ i think thats the same command from previous thread but i'm trying it
[02:03] <EriC^^> it's a different github, worth a shot
[02:05] <mike123> EriC^^ it keeps telling me how much will be downloaded would you like to continue y/n. when i hit y and enter it says abort
[02:05] <fazz> anyone have any recommendations on an app for making a usb startup disk on ubuntu?
[02:05] <EriC^^> fazz: unetbootin
[02:06] <EriC^^> fazz: or startup disk creator
[02:06] <fazz> thanks..
[02:06] <mike123> EriC^^After this operation, 22.7 MB of additional disk space will be used.
[02:06] <mike123> Do you want to continue? [Y/n] y
[02:06] <mike123> Abort.
[02:06] <fazz> i tried startup but it doesn't want to recognize knoppix
[02:06] <EriC^^> yeah, i think it's only for ubuntu iso's
[02:06] <cfhowlett> fazz, unetbootin
[02:07] <fazz> so unetbootin will work for any? awesome thanks...
[02:12] <mike123> why when installing via terminal it says 22.7mb will be install would you like to proceed y/n. no matter what i do it aborts
[02:18] <satelite> my date and time on the  unity panel regularly disappears (Im running 14.04).  I have followed the instructions listed here to re-active date and time: http://askubuntu.com/questions/45970/missing-date-time-applet-from-top-unity-panel
[02:18] <satelite> but after a few days date and time disappear again
[02:18] <satelite> is there a more permanent solution? does anyone know why date and time regularly disappears?
[02:26] <Guest16316> hello
[02:26] <Foxhoundz> Hello #16316
[02:26] <Foxhoundz> Thank you. I was about to put you in the 16,316th place in line to receieve assitance. :)
[02:27] <Mike_H1960> im here to asist if i can
[02:28] <Foxhoundz> ok good maybe you can help me. How do I edit the welcome ssh message on the latest Ubuntu servers that has stats like the uptime, update status, and other tidbits when you first login?
[02:28] <EriC^^> Mike_H1960: hmm, no ide maybe the versions don't match?
[02:28] <EriC^^> *idea
[02:29] <EriC^^> oops, was meant for someone else
[02:29] <Mike_H1960> well im not on ubuntu but i have ran ubuntu on other comps
[02:31] <gr33n7007h> Foxhoundz: /etc/motd ?
[02:31] <ilosamart> Foxhoundz: if Ii may, i think this is what you're looking for: http://manpages.ubuntu.com/manpages/utopic/man5/update-motd.5.html
[02:32] <Foxhoundz> Thank you!
[02:33] <ilosamart> Foxhoundz: if it was meant for me, you're welcome
[02:33] <ilosamart> if not, sorry
[02:43] <yuan> hello!
[02:43] <TiK> HI
[02:48] <ilosamart> hello
[02:49] <jeffrey_f> ilosamart: Ask your question(s)
[02:53] <ilosamart> jeffrey_f: sorry, i was greeting yuan
[02:53] <ilosamart> jus a little late
[02:54] <jeffrey_f> ilosamart: :) oops, carry on
[02:57] <satelite> my date and time on the  unity panel regularly disappears (Im running 14.04).  I have followed the instructions listed here to re-active date and time: http://askubuntu.com/questions/45970/missing-date-time-applet-from-top-unity-panel but after a few days date and time disappear again is there a more permanent solution? does anyone know why date and time regularly disappears?
[02:58] <uhhimhere> hi guys im on 11.04 and i just got a warning saying that my disk space is less than 2g on /home; wheni i run df i see that i have at least 13G
[02:59] <daftykins> 11.04 hahaha
[02:59] <daftykins> !11.04
[02:59] <daftykins> sooo, 2 years 4 months dead OS
[02:59] <daftykins> you should not be using that. seriously.
[02:59] <Marcello-MiX> !14.10
[02:59] <daftykins> was it a typo? :)
[03:00] <mike123> will linux mint commands for kde work in ubuntu?
[03:02] <uhhimhere> so anybody knows why im getting that messahge
[03:03] <daftykins> uhhimhere: you're going to want to respond to my messages first
[03:03] <daftykins> as if you're running a dead release, there's no point even fixing it
[03:03] <uhhimhere> huh?
[03:03] <daftykins> you said 11.04
[03:03] <uhhimhere> anybody excluding daftykins have any suggestions?
[03:03] <daftykins> we don't help those running an EOL release
[03:04] <Dark-knight> hey people i don't know
[03:04] <Dark-knight> im just trying to spread the good word
[03:04] <daftykins> you're putting yourself at risk of some MASSIVE security issues that've cropped up in Linux in the last couple of years
[03:04] <Dark-knight> if you are having problems with the HTML5 player on youtube then look at this http://pastebin.com/R87dtKgZ
[03:04] <Dark-knight> that is all
[03:04] <daftykins> king_1: quite frankly you're endangering yourself, you need to backup and upgrade.
[03:09] <bruxC> a little lost with moving a directory with files in it into another directory. checked the mv manual but do not see any parameters that are applicable. Am i using the wrong command?
[03:10] <daftykins> mv folder path
[03:10] <somsip> bruxC: what command are you using?
[03:11] <bruxC> sudo mv FOLDER1 FOLDER2/FOLDER1
[03:11] <daftykins> yeah you don't name the original folder
[03:12] <bruxC> I do for categorizing purposes.
[03:12] <bruxC> I believe I figured out the problem. Folder had spaces. Stupid backslashes.
[03:12] <daftykins> no i'm saying if you're moving folder1 to be beneath folder2, you don't name it in the command again
[03:12] <bruxC> Thanks for letting me talk it out.
[03:13] <daftykins> yeah best to avoid spaces in files and folders in *nix :>
[03:13] <bruxC> Oh. I see, I tried doing it that way and it gave me an error message.
[03:13] <bruxC> mv: cannot move ‘FOLDER1’ to ‘DIR1/FOLDER1’: Directory not empty
[03:14] <ilosamart> anyone with the problems Dark-knight mentioned, please, keep in mind that ADOBE does not  provide updates to their FLASH plugin for Firefox
[03:14] <bruxC> What's *nix :> ? Or should I be googling it?
[03:14]  * daftykins goes to bed
[03:15] <ilosamart> bruxC: any uNIX
[03:16] <ilosamart> "unix"
[03:17] <bruxC> gotcha. Won't forget that.
[03:18] <ilosamart> bruxC: mv FOLDER1 DIR1/
[03:18] <ilosamart> bruxC: ls DIR1 -l
[03:18] <ilosamart> bruxC: you should see FOLDER1 beneath DIR1
[03:18] <bruxC> I was luckily able to get it to work but for whatever the reason mv FOLDER1 DIR1/ didn't like me.
[03:18] <ilosamart> ok
[03:19] <ilosamart> glad it worked
[03:21] <bruxC> thanks for the help, ilosamart
[03:22] <MannyLNJ> I started installing an app using software center but it seems to have stalled. How can I check the status?
[03:24] <ilosamart> bruxC: you're welcome
[03:35] <keepthelightonba> hello
[03:36] <lotuspsychje> keepthelightonba: welcome
[03:38] <omgitsmit> MannyLNJ: thats happened to me before, i usually just kill the software centre
[03:38] <omgitsmit> MannyLNJ: when i relaunch it will either show it's already installed or i can attempt to install it again.
[03:39] <theprezz> Sorry to all just installed the app and chanvged my nick
[03:44] <theprezz> will hang around next time and have a chat
[03:47] <skweek> does anyone have a tablet/slate/ultrabook running ubuntu and have a rotation method they would like to share?
[03:48] <ubuntu-studio> hello
[03:49] <NetworkingPro> Hey everyonee
[03:49] <Cybuss> i have a question about log files in /var/log, do i have to have a special text editor to open them?
[03:50] <NetworkingPro> Cybuss: No, in fact I dont recommed a text editor as they are dynamic.
[03:50] <NetworkingPro> I would use something like cat to read them
[03:50] <NetworkingPro> and grep to filter
[03:50] <Cybuss> is cat a shell?
[03:50] <lotuspsychje> !info colortail | Cybuss
[03:51] <NetworkingPro> Cybuss: Cat is a command
[03:51] <omgitsmit> Cybuss: do you know how to get to the terminal in linux?
[03:51] <NetworkingPro> Cybuss: What are you trying to do exactly?
[03:51] <lotuspsychje> skweek: what do you mean with rotation method
[03:52] <somsip> Cybuss: you can use a text editor to read them, but to watch them something as simple as 'tail -f /var/log/filename' can be sufficient
[03:52] <Cybuss> I do know how to get to the terminal. im just trying to check my logs to make sure my fresh install is running properly
[03:52] <NetworkingPro> ubottu: Holy crap bro, thanks for colortial...
[03:52] <NetworkingPro> thats magical.
[03:52] <omgitsmit> yeah i bookmarked that today also <3
[03:52] <lotuspsychje> no sweat
[03:52] <omgitsmit> you just leveled up
[03:53] <NetworkingPro> Cybuss: I would do       colortail -f /var/log/syslog
[03:53] <omgitsmit> now go install zsh with byobu
[03:53] <NetworkingPro> you may have to do   sudo apt-get install colortail    first
[03:54] <NetworkingPro> Im running Ubuntu 14.04, and Im trying to setup an SMB server (or NFS) that has a single user account that can login to a share, r/w, etc.
[03:54] <Guest9153> daftykins: hey. I m the guy with overheating problem. It happened again. I didn't had chrome running this time
[03:54] <NetworkingPro> Seeeems pretty basic but I cat seem to get it to work to save my life.
[03:54] <AegNuddel> help my internet keeps disconnecting
[03:54] <emotionull> daftykins: Changed nick. I m the guy. Sorry
[03:55] <AegNuddel> it lets me reconnect quickly enough to keep my connection here
[03:55] <lotuspsychje> AegNuddel: wifi or ethernet?
[03:55] <AegNuddel> wifi
[03:55] <Cybuss> that colortail works pretty nice. thanks!
[03:55] <lotuspsychje> AegNuddel: wifi card chipset?
[03:55] <AegNuddel> i dunno
[03:55] <lotuspsychje> !yay | Cybuss
[03:56] <lotuspsychje> AegNuddel: sudo lshw  -C network
[03:56] <AegNuddel> I just upgraded
[03:56] <NetworkingPro> mtr is another magical linux tool
[03:56] <NetworkingPro> thats essential in my book
[03:56] <lotuspsychje> AegNuddel: upgrade from wich to wich?
[03:56] <NetworkingPro> Anyone have experience with NFS or SMB?
[03:57] <lotuspsychje> !nfs | NetworkingPro
[03:57] <AegNuddel> hold on
[03:57] <omgitsmit> WOW mtr!
[03:57] <omgitsmit> sysadmin rejoice!
[03:57] <NetworkingPro> ubottu: un momento
[03:57] <omgitsmit> i use nethog and iptraf also
[03:57] <NetworkingPro> omgitsmit: Had you never seen that before?
[03:57] <omgitsmit> nope
[03:57] <omgitsmit> i use tracert
[03:58] <NetworkingPro> Its magic..
[03:58] <omgitsmit> love it
[03:58] <NetworkingPro> Not anymore you dont!  lol
[03:58] <emotionull> I am facing (false?) overheating issue. My laptop is HP Envy (link http://www.officedepot.com/a/products/458069/HP-ENVY-Laptop-Computer-With-156/) running Ubuntu 14.04.02 LTS 64 bit dual booted with Windows 8.1. I have ran many more heavier processes simultaneously on Windows and nothing ever happened. But Ubuntu shuts down abruptly even on half the load. I even tried changing CPU Governor...
[03:58] <lotuspsychje> !smb > NetworkingPro
[03:58] <emotionull> ...from ondemand to powersave. Didn't help.
[03:58] <omgitsmit> leveled up my life just now
[03:58] <emotionull> And on restart the boot screen shows that the laptop was turned off due to overheating
[03:58] <omgitsmit> emotionull: have you tried default BIOS settings?
[03:59] <omgitsmit> emotionull: are you overclocking after install?
[03:59] <lotuspsychje> emotionull: are you sure this is cpu overheating?
[03:59] <emotionull> omgitsmit: nope nope.. I havent done anything with BIOS.
[03:59] <omgitsmit> "I even tried changing CPU Governor"
[03:59] <omgitsmit> wat
[03:59] <Ancient> Is it possible to add the trusty package repo to precise without doing a dist upgrade? Keeping the distro working doesn't matter. (Travis CI is stuck on 12.04 and I need some 14.04 updates for it)
[04:00] <lotuspsychje> emotionull: can you tell us what happens exactly? freeze? shutdown?
[04:00] <emotionull> omgitsmit: Ya. But I changed back to ondemand. Still same prob
[04:00] <emotionull> lotuspsychje: shutdown
[04:00] <omgitsmit> Ancient: wouldnt the kernel depend on the packages? i would assume the repo would think you would be at least a certain kernel level
[04:00] <escapeVelocity> hmm just tried colortail..nice
[04:00] <emotionull> abrupt shutdown. No time to anaylze anything
[04:00] <lotuspsychje> escapeVelocity: glad you like
[04:00] <Ancient> omgitsmit, I won't be installing any packages that depend on newer kernel features.
[04:01] <escapeVelocity> lotuspsychje thanks for the tip
[04:01] <lotuspsychje> no sweat mate
[04:01] <omgitsmit> Ancient: if you're so sure on that then i wouldnt see the issue
[04:01] <AegNuddel> http://paste.ubuntu.com/10301537/
[04:01] <omgitsmit> i personally wouldnt mix em
[04:01] <lotuspsychje> !atheron | AegNuddel
[04:02] <lotuspsychje> hmm
[04:02] <AegNuddel> !atheron
[04:02] <lotuspsychje> !atheros | AegNuddel
[04:02] <derdui> Hi :) One question about PHP. I wanna open a PHP-File in Firefox. But everytime, i try to open, a dialogue-window pops up, how to open it. open it throughout an HTML-File, it works. Any Ideas?
[04:02] <emotionull> omgitsmit: I changed governor via cpufrequtils
[04:02] <lotuspsychje> AegNuddel: some atheros cipsets might need firmware update to work properly
[04:02] <omgitsmit> emotionull: yeah i bookmarked that today also, were you asking about that earlier?
[04:02] <AegNuddel> oh
[04:03] <lotuspsychje> AegNuddel: also check your logs to see whats happening with your wifi
[04:03] <emotionull> omgitsmit: yup...about 4 hours bacl
[04:03] <omgitsmit> yeah hahaha
[04:03] <AegNuddel> where are the logs?
[04:03] <lotuspsychje> AegNuddel: /var/log/syslog and dmesg
[04:04] <lotuspsychje> AegNuddel: you can type dmesg in a terminal
[04:04] <Cybuss> should i be worried about this line in my syslog? http://pastebin.com/gqUyHN3a
[04:04] <omgitsmit> Cybuss: it wants you to install a package
[04:05] <omgitsmit> nns-myhostname
[04:05] <omgitsmit> here lemme try
[04:05] <omgitsmit> !nns-myhostname | Cybuss
[04:05] <emotionull> lotuspsychje: would upgrading to 14.10 help?
[04:05] <omgitsmit> awe
[04:06] <somsip> !info nns-myhostname
[04:06] <omgitsmit> oh wow
[04:06] <somsip> !info nss-myhostname
[04:06] <Cybuss> im googling it right now
[04:06] <somsip> !find nss-myhostname
[04:06] <somsip> seems like its a there, but dunno what it does
[04:06] <omgitsmit> i usually just use sudo apt-cache search
[04:07] <lotuspsychje> emotionull: you need to findout whats happening exactly first, did you check bios for cpu heat?
[04:07] <omgitsmit> yeah its complaining about changing hostnames?
[04:07] <omgitsmit> systemd-hostnamed is making the call
[04:07] <Cybuss> maybe i dont need that package but its still referenced?
[04:08] <omgitsmit> well its just a warning message
[04:08] <AegNuddel> dang it
[04:08] <AegNuddel> why
[04:08] <AegNuddel> It worked in lucid
[04:08] <omgitsmit> but ive never seen it before, so
[04:08] <emotionull> lotuspsychje: how do I check BIOS? I checked /var/log/syslog  It has this message ->   kernel: [22600.504915] thermal thermal_zone0: critical temperature reached(128 C),shutting down
[04:08] <omgitsmit> emotionull: sounds like its overheating bro
[04:08] <lotuspsychje> emotionull: thats doesnt sound good indeed
[04:08] <omgitsmit> thermal shutdown
[04:09] <lotuspsychje> emotionull: how old is your laptop?
[04:09] <omgitsmit> when you turn it back on does the BIOS report anything about thermal shutdown?
[04:09] <emotionull> Ok. Its brand new. Just a month old
[04:09] <Cybuss> i would dust your laptop heatsinks and check your thermal paste
[04:09] <lotuspsychje> emotionull: what brand?
[04:09] <emotionull> Yup. the bios reports overheating
[04:09] <emotionull> HP Envy
[04:09] <omgitsmit> yeah factory may have fudged the thermal compound on the heatsink
[04:09] <lotuspsychje> right
[04:09] <emotionull> i7 quad core
[04:09] <omgitsmit> easy fix
[04:09] <lotuspsychje> emotionull: did you try defaults in bios?
[04:09] <omgitsmit> but if its brand new, call it in
[04:10] <emotionull> Yup. I didnt change anything in the bios. Still faced the same problem
[04:10] <emotionull> And in windows, I had more than double processes running. Still no such shutdown
[04:10] <lotuspsychje> emotionull: checked hp website for bios flashes that could fix cpu overheat?
[04:10] <Goose_> sup guys
[04:11] <omgitsmit> That goose is totally loose
[04:11] <emotionull> lotuspsychje: nope. Checking now
[04:11] <lotuspsychje> lol
[04:11] <Goose_> So, I have a .sh script that will autoreconnect a vpn that I want to run every time I login, how do I make that happen? Where would I save the file?
[04:11] <Goose_> loosey goosey baby
[04:11] <omgitsmit> Goose_: you have options
[04:11] <Goose_> explain
[04:12] <omgitsmit> Goose_: easiest? add @reboot entry to cronjobs
[04:12] <omgitsmit> Goose_: correct way? rc.d start scripts
[04:12] <lotuspsychje> emotionull: if ubuntu report such warnings, its always true
[04:12] <omgitsmit> ubuntu wouldnt lie
[04:12] <AegNuddel> from lucid to 12.04
[04:12] <omgitsmit> OR WOULD IT
[04:12] <Cybuss> judging by this https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1277608
[04:12] <Goose_> I'll try that
[04:12] <Cybuss> my hostname warning is nothing serious but a small bug
[04:13] <omgitsmit> Cybuss: yeah it was just a warning message
[04:13] <emotionull> lotuspsychje: Ok. But windows never reports any such thing
[04:13] <omgitsmit> i get a similar one because i havent set up my hostname for my default webserver
[04:13] <lotuspsychje> emotionull: i had a win laptop recently with dead cpu on win7 that still reached login..tryed ubuntu on it and the install refused to install on broke cpu
[04:13] <omgitsmit> blah blah warning
[04:13] <AegNuddel> I just want my wifi to stay connected!!!
[04:13] <lotuspsychje> AegNuddel: you need to play around with atheros drivers
[04:13] <emotionull> lotuspsychje: Oh! Thats scary! Will contact HP
[04:13] <bleezy208> Can I get some help please. I tried to fix system updater when I rebooted all I get is a black screen but mouse cursor works
[04:14] <AegNuddel> it won't for more than 30 seconds it seems
[04:14] <Goose_> Would this work for auto-reconnecting my VPN? http://pastebin.com/Nkcftmky
[04:14] <lotuspsychje> AegNuddel: check the wifi link i paste you and atheros drivers website
[04:14] <lotuspsychje> AegNuddel: did you check your additional drivers section?
[04:15] <lotuspsychje> emotionull: you can also try a fresh 14.04 install single, see if it makes any difference
[04:15] <omgitsmit> or just live cd
[04:16] <Cybuss> i checked a log file with colortail, when i prss ctrl h it just shows ^h
[04:16] <lotuspsychje> Cybuss: what are you trying to do?
[04:16] <omgitsmit> Cybuss: why ctrl h?
[04:16] <emotionull> lotuspsychje: single? u mean I should wipe out windows?
[04:16] <lotuspsychje> emotionull: yes try it single install
[04:16] <Cybuss> im trying to exit the thing so i can check another file
[04:16] <omgitsmit> emotionull: honestly, i think you overclocked your cpu and damaged it
[04:16] <lotuspsychje> Cybuss: press q
[04:17] <omgitsmit> now its reporting thermal shutdown even tho its fine
[04:17] <emotionull> omgitsmit: No. I havent touched the BIOS. I am a noob. I dont knw how to do that
[04:17] <lotuspsychje> lol
[04:17] <omgitsmit> its a month old
[04:17] <omgitsmit> call hp
[04:17] <emotionull> omgitsmit: Yup. thanks
[04:17] <lotuspsychje> emotionull: had any short circuits in home? thunder?
[04:18] <emotionull> lotuspsychje: Nope.
[04:18] <Cybuss> lotus q does nothing but type a q
[04:18] <omgitsmit> but you were playing with which package 4 hours ago?
[04:19] <lotuspsychje> Cybuss: og your on tail, just close the terminal
[04:19] <omgitsmit> emotionull: so you're saying cpufrequtils had nothing to do with this?
[04:19] <omgitsmit> nothing at all
[04:23] <AegNuddel> How...
[04:24] <omgitsmit> That's the name of the game.
[04:26] <lotuspsychje> AegNuddel: there's a hardware icon in your dash, 'additional drivers'
[04:27] <lotuspsychje> AegNuddel: did you install ubuntu with ethernet cable and updates during setup?
[04:35] <yvear> hello! I created a new user on a server (14.04) and am accessing it through ssh/sftp. though, I cannot move/create/etc. files. how do I fix that? I also have root privileges
[04:35] <omgitsmit> yvear: is the new user moving files that arent theirs?
[04:35] <omgitsmit> sounds like permissions
[04:36] <omgitsmit> as basic user should only have permission to create files within their home folder, i.e. /home/omgitsmit
[04:36] <yvear> omgitsmit, it says denied yes
[04:36] <omgitsmit> so its doing its job
[04:37] <omgitsmit> yvear: im not sure what you're trying to move, but maybe th read-only perms will allow you to cp instead
[04:38] <escapeVelocity> sudo?
[04:38] <omgitsmit> escapeVelocity: its a new user on a server, i dont think they're in the sudoers file
[04:39] <Power_super> Is a malformed path just a synaxicallty wrong path
[04:39] <Power_super> e.g /this/directory/does/not/exist
[04:39] <escapeVelocity> omgitsmit ah-huh
[04:39] <Power_super> or a path that does not exist
[04:39] <Ben64> Power_super: give us more details
[04:39] <somsip> Power_super: a syntaxically wrong path does not exist, so it's the same thing
[04:40] <yvear> escapeVelocity, omgitsmit, I can sudo but I want to sftp directly using new user and start moving files
[04:40] <Ben64> yvear: moving what files, to where
[04:40] <omgitsmit> yvear: you might be able to cp, instead of mv
[04:40] <omgitsmit> the user you're using doesnt have perms over those files
[04:41] <yvear> omgitsmit, how do I give it permissions?
[04:41] <lotuspsychje> !chmod
[04:44] <lotuspsychje> someone knows the gksudo command to open firefox on the guest account from an existing user?
[04:45] <Cybuss> thats a tough one. i never run a guest account, i really dont show my linux os with anyone so i never thought it useful
[04:46] <omgitsmit> wouldnt it just be gksudo guest firefox?
[04:46] <lotuspsychje> omgitsmit: lemme try
[04:46] <omgitsmit> i use su <user> all the time
[04:46] <omgitsmit> i would assume gksudo would be the same
[04:47] <jishjish> hi all, is it possible to use Find command and ask it to show you all directories which contain files with XYZ and ABC extensions? I only know how to search for one or other (directory or file) in the name. Not how to ask it to show me the directories which contain these kinds of files.
[04:48] <lotuspsychje> omgitsmit: lotuspsychje@R00TB0X:~$ gksudo guest firefox
[04:48] <lotuspsychje> (gksudo:13242): GConf-CRITICAL **: gconf_value_free: assertion 'value != NULL' failed
[04:49] <lotuspsychje> think it needs X somewhere if i can recall
[04:49] <omgitsmit> prolly
[04:49] <lotuspsychje> normally i use sux, but its too much outdated
[04:49] <paul8star> hi
[04:50] <Ben64> lotuspsychje: gksu -u user firefox
[04:50] <omgitsmit> there it is
[04:50] <lotuspsychje> lets try
[04:50] <azizLIGHT> how do i tell if a package i have is from a 3rd party source like ppa or from official repo
[04:50] <Ben64> azizLIGHT: apt-cache policy <package>
[04:50] <azizLIGHT> cool, thanks ben
[04:51] <lotuspsychje> Ben64: No protocol specified
[04:51] <lotuspsychje> No protocol specified
[04:51] <lotuspsychje> Error: cannot open display: :0
[04:51] <lotuspsychje> size == 0' failed
[04:51] <ranger81> how do I grep for certain string from a set of files with in lines 11 to 20 only?
[04:52] <Ben64> lotuspsychje: why are you trying to do that anyway
[04:53] <lotuspsychje> Ben64: i would like a quick guest firefox session, that wipes history after using
[04:53] <lotuspsychje> but from an existing user
[04:53] <jishjish> Ben64: do you know how I can use FIND to list all the folders which contain file types ABC and XYZ? I only know how to search for directory or file names, not how to get directories which only contain certain files.
[04:53] <lotuspsychje> jishjish: man find?
[04:54] <somsip> jishjish: you come here often enough to know not to address people directly if they are not already talking to you.
[04:54] <omgitsmit> jishjish: you want GUI?
[04:55] <gr33n7007h> lotuspsychje: gksu -u <user> /usr/bin/firefox #maybe?
[04:55] <omgitsmit> jishjish: check out searchmonkey and/or regexxer
[04:56] <Ben64> the problem is the user doesn't have permission to use :0
[04:56] <omgitsmit> great search utils
[04:56] <CoWeAn> Hello everyone. I need some help installing Korean input on my Ubuntu laptop, and if anyone would kindly help me...
[04:56] <lotuspsychje> gr33n7007h: same error
[04:56] <jishjish> omgitsmit: can you do it just with find and without special search tools?
[04:56] <gr33n7007h> ah, damn like Ben64 said gonna be permission issues
[04:57] <omgitsmit> CoWeAn: check-language-support -l kor
[04:57] <omgitsmit> jishjish: someone that knows their way with find would probably know
[04:57] <omgitsmit> i use find so basically in terminal
[04:57] <yvear> how do I change a directory's owner and all files and sub-directories to 'userZ'?
[04:57] <jishjish> me too, so basic.
[04:57] <CoWeAn> omgitsmit: nothing happened
[04:57] <omgitsmit> i rely on GUI tools for advanced stuff
[04:57] <somsip> jishjish: find . -type f -name 'ext1' -o -name 'ext2'
[04:58] <somsip> yvear: chown -R user /path (probably need sudo too)
[04:58] <somsip> jishjish: sorry *ext1 and *ext2
[04:59] <jishjish> somsip: but won't that only show me where the files are (as compared to the directories where file types ABC are located, which would be considerably smaller?
[04:59] <jishjish> *would be a considerably smaller list?
[05:00] <omgitsmit> CoWeAn: sudo apt-cache search language-pack
[05:00] <Goose_> jesus christ I give up. How can I make my VPN autoconnect?
[05:00] <Goose_> I've written a script, and found 2 others and none of them work right
[05:01] <somsip> jishjish: you want to exclude where the path is the same except for the filename?
[05:01] <omgitsmit> Goose_: they all cant be winners
[05:01] <omgitsmit> Goose_: ive seen articles on persistant ssh connections
[05:01] <omgitsmit> maybe you can start there?
[05:02] <diegoviola> hi
[05:02] <jishjish> somsip, no I want to see the Paths to only the directories which contain files of ABC or XYZ file extension?
[05:02] <diegoviola> how do I install ubuntu to a btrfs subvolume?
[05:02] <omgitsmit> Goose_: http://ubuntuforums.org/showthread.php?t=1067247
[05:02] <lotuspsychje> !btrfs | diegoviola
[05:02] <diegoviola> and is there a way I can tell ubuntu not to intall grub as I already have it installed?
[05:02] <omgitsmit> Goose_: you just gotta find a init.d script that does work
[05:02] <jishjish> so instead of there being two .py files in one folder and ten in another I would just get the paths of the two directories
[05:04] <azizLIGHT> if i want to test a package from ppa, what do i do to properly uninstall it after i added i did "sudo add-apt-repository ppa:user/ppa-name && sudo apt-get update && sudo apt-get package"
[05:04] <top> hi
[05:04] <nickSwe> Is it even possible to have the top panel completely transparent? I have googled for days trying to find an answer. This is Ubuntu 14.10 and Unity
[05:04] <top> anybody have experience to install LAMP on centos?
[05:04] <lotuspsychje> nickSwe: i thin unity-tweak-tool can do that
[05:04] <azizLIGHT> this is #ubuntu
[05:05] <lotuspsychje> !info unity-tweak-tool | nickSwe
[05:05] <nickSwe> lotuspsychje: Ive set it to 0.0 opacity but it still is not completely transparent...
[05:05] <CoWeAn> omgitsmit: what do you want me to do with that?
[05:05] <goose_> and I'm back
[05:05] <yvear> omgitsmit, somsip, tyvm
[05:05] <omgitsmit> CoWeAn: you were looking for language packages?
[05:05] <lotuspsychje> nickSwe: you can also check ccsm and play around with the unity plugin
[05:06] <Cybuss> im not entirely new to linux, though im a bit inept. more so with unity, so the question is. anyone know any useful applets to mak organization easier?
[05:06] <nickSwe> lotuspsychje: you mean compiz config? if yes - ive tried that too... Its impossible
[05:06] <CoWeAn> omgitsmit:  no, I am having trouble getting it to work. I already have it installed
[05:06] <nickSwe> Is there maybe a .png file somewhere in the system that is rendering the panel that I can replace with a new png that is 100% transparent?
[05:06] <goose_> Cybuss: What kind of applets you looking for?
[05:06] <lotuspsychje> Cybuss: organize what exactly?
[05:06] <goose_> ^
[05:06] <azizLIGHT> how do i properly undo adding package from ppa, its files, and ppa itself, so i can normally install the official repo package version?
[05:07] <Cybuss> perhaps a dropdown menu for launchers and misc
[05:07] <omgitsmit> azizLIGHT: sudo apt-get remove?
[05:07] <goose_> sudo apt-get autoremove?
[05:07] <omgitsmit> ^5
[05:07] <azizLIGHT> does that kill the ppa too?
[05:07] <lotuspsychje> nickSwe: maybe the #ubuntu-devel guys might know a deep down workaround?
[05:07] <goose_> only the obsolete ones
[05:07] <omgitsmit> you can rm the ppa from your sources folder
[05:07] <omgitsmit> thats how i kill mine
[05:07] <omgitsmit> im sure there's a "proper" way
[05:08] <nickSwe> lotuspsychje: thanks for the tip, ill go there and check!
[05:08] <lotuspsychje> !ppapurge
[05:08] <omgitsmit> +1 lotuspsychje
[05:08] <lotuspsychje> !cookie | omgitsmit
[05:08] <jishjish> somsip: any ideas to return just the directories which contain those files?
[05:08] <omgitsmit> there's always a better way to do it
[05:08] <omgitsmit> hahaha
[05:08] <lotuspsychje> :p
[05:08] <somsip> jishjish: wait or find it yourself
[05:08] <omgitsmit> lotuspsychje: thats another neat tool
[05:08] <goose_> Cybuss: For a dropdown launcher like you want you can try this, it's similar to gnome2's dropdown
[05:09] <azizLIGHT> thanks
[05:09] <lotuspsychje> omgitsmit: i like neat ubuntu toolz :p
[05:09] <goose_> http://pastebin.com/ED27H5f1
[05:09] <azizLIGHT> i was using y-ppa and it always messes up saying ppa exists or someting
[05:09] <lotuspsychje> omgitsmit: sux was one of it to run X packages over other users
[05:09] <somsip> jishjish: here's your example. Change path and extensions as appropriate find . -type f -name '*.png' -o -name '*.log' | xargs -n1 dirname | uniq
[05:09] <omgitsmit> azizLIGHT: how are you adding it?
[05:10] <Cybuss> thanks goose
[05:10] <azizLIGHT> omgitsmit: with "sudo add-apt-repository ppa:user/ppa-name && sudo apt-get update && sudo apt-get package"
[05:10] <omgitsmit> alright just making sure
[05:10] <azizLIGHT> thats correct?
[05:10] <omgitsmit> yeah thats what i do
[05:10] <goose_> JCybuss: ust look up ubuntu applets or indicators online and you can find a bunch of useful stuff. Anything else specific you wanted
[05:10]  * omgitsmit shrugs
[05:10] <omgitsmit> works for me
[05:10] <azizLIGHT> after i do ppa-purge do i have to do sudo uypdate ?
[05:11] <azizLIGHT> sudo apt-get update
[05:11] <omgitsmit> yeah you should
[05:11] <omgitsmit> so when you attempt to install, it hits the repo
[05:11] <azizLIGHT> ahhh ok
[05:11] <Cybuss> is there any in particular you find useful goose?
[05:11] <lotuspsychje> the classicmenu-indicator is very neat also, showing all menus items nicely (good for starters)
[05:11] <azizLIGHT> Cybuss: there was this website i saw with nice screenshots of many indicators
[05:11] <azizLIGHT> Cybuss: let me find it for u
[05:11] <solidus-1iver> how do i enable or disable upstart scripts in ubuntu?
[05:12] <Cybuss> thanks aziz
[05:12] <lotuspsychje> !upstart | solidus-1iver
[05:12] <azizLIGHT> Cybuss: this is for 14.04 but u get the idea http://www.noobslab.com/2014/08/useful-panel-indicators-collection-for.html
[05:12] <goose_> Cybuss: I just use f.lux, cpufreq (preinstalled), multiload,
[05:12] <goose_> ^^
[05:12] <omgitsmit> lotuspsychje: wait, no more init.d start scripts?
[05:12] <lotuspsychje> goose_: multiload is neat
[05:13] <goose_> I love multiload, super useful
[05:13] <lotuspsychje> omgitsmit: init.d is the older system, use upstart now
[05:13] <azizLIGHT> Cybuss: i use pushbulet and multiload and a temperature thing
[05:13] <omgitsmit> !
[05:13] <goose_> and everyone should use f.lux
[05:13] <lotuspsychje> goose_: url?
[05:13] <lotuspsychje> !info f.lux
[05:13] <goose_> pushbullet is amazing. Didn't know they had an actual applet for the OS itself though, just been using it on chrome
[05:13] <omgitsmit> lotuspsychje: but i have so many init scripts that i need :(
[05:14] <azizLIGHT> Cybuss: oh and i also use one that lets you put in custom command outputs. so i put my hdd df -h output
[05:14] <goose_> Well I'm using it now
[05:14] <Cybuss> very useful suggestions, thanks xD
[05:14] <goose_> azizLIGHT: What temp thing?
[05:14] <azizLIGHT> Cybuss: eventually i ll put a weather temp in F. and i also had a bitcoin price one
[05:14] <azizLIGHT> goose_: psensor
[05:14] <azizLIGHT> its got nice graphs too
[05:14] <azizLIGHT> goose_: and alarms
[05:14] <goose_> thanks
[05:15] <goose_> i need one for real weather too
[05:15] <omgitsmit> conky is neat
[05:15] <goose_> havent gotten around to finding one
[05:15] <azizLIGHT> goose_: look at this screenshot its nice http://www.webupd8.org/2014/06/psensor-updated-with-option-to-display.html
[05:15] <goose_> Conky is great
[05:15] <azizLIGHT> i thought people use something different than conky nowadays?
[05:16] <Cybuss> multi load is very nice
[05:16] <omgitsmit> damn dude, is all my linux stuff out-dated?!
[05:16] <lotuspsychje> lol
[05:16] <omgitsmit> what the heck is going on
[05:16] <azizLIGHT> nah im asking
[05:16] <omgitsmit> WE HAVE TO GO BACK MARTY
[05:16] <azizLIGHT> lol!
 What do you mean?
[05:16] <omgitsmit> conky <3
[05:16] <omgitsmit> init.d <3
[05:16] <omgitsmit> i hate you all
[05:17] <lotuspsychje> apt-cache search indicator, to see all
[05:17] <goose_> dont be that way
[05:18] <Cybuss> is there a psensor package for 14.10?
[05:18] <lotuspsychje> !info psensor | Cybuss
[05:18] <omgitsmit> lotuspsychje: hold up, i have to install this? so its not fully adopted out of the box yet
[05:18] <lotuspsychje> omgitsmit: install what?
[05:18] <omgitsmit> upstart
[05:18] <Cybuss> lol thanks lotus. ill have to remember to use the bot :)
[05:19] <lotuspsychje> omgitsmit: no, upstart is default now, the older system uses init, and there are plans to use systemd on ubuntu future
[05:19] <lotuspsychje> !msgthebot | Cybuss
[05:19] <jishjish> somsip: my apologies I didn't realise it was étiquette not to address people directly when they are not talking to you. I'll keep that in mind for next time.
[05:20] <goose_> how do I get conky working? I haven't used it in forever
[05:20] <lotuspsychje> goose_: apt-get install conky?
[05:20] <somsip> jishjish: fair enough. Did it work though?
[05:21] <omgitsmit> just buy the lad a pint
[05:21] <omgitsmit> and call it even
[05:21] <goose_> I meant actually setting it up, adding things, etc
[05:22] <lotuspsychje> goose_: apt-cache search conky shows all you need
[05:22] <goose_> Cybuss: You can also add docky if you want a little dock at the bottom, but the sidebar kind already does that
[05:22] <omgitsmit> i got all into docky
[05:22] <omgitsmit> awn dock also
[05:23] <goose_> thanks!
[05:23] <Cybuss> i have tried docky before. this was 2-4 years ago, it was a buggy mess
[05:23] <goose_> Yeah, docky is actually really nice suprisingly
[05:23] <lotuspsychje> and after playing all those around, unity left bar stays the most intuitive one :p
[05:23] <omgitsmit> i switched back to gnome3 and never looked back
[05:23]  * omgitsmit ducks
[05:23] <Cybuss> yeah docky is very nice looking. have they fixed its issues?
[05:23] <goose_> Yeah, I only never liked the sidebar cause it looked bad, but I got numix gtk now and it looks amazing
[05:23] <lotuspsychje> !info docky
[05:23] <brightknight> hi
[05:24] <goose_> As far as i can tell
[05:24] <lotuspsychje> !info docky precise
[05:24] <goose_> nah
[05:24] <omgitsmit> to be fair, if you set your wallpaper to a cheat sheet of unity keyboar ninja shortcuts, its really awesome
[05:24] <lotuspsychje> versions climbed up, thats a good sign :p
[05:25] <goose_> just hold your super button for the shortcuts!
[05:25] <omgitsmit> "super button"
[05:25] <omgitsmit> that goose is totally loose
[05:25] <lotuspsychje> goose_: check ubuntu /conky keywords on deviantart, shows alot of happy candy eye users
[05:25] <goose_> dude how do I fix it to when I open things it doesn't go to the bottom of the sidebar?
[05:26] <goose_> that's what they call it on here, never knew the name lol
[05:26] <goose_> thanks!
[05:27] <omgitsmit> yeah just browsing through the screenshots makes you want to theme your own
[05:27] <omgitsmit> it snowballs from there
[05:27] <omgitsmit> beware
[05:27]  * lotuspsychje dreams about the unity left bar be able to drag to bottom one day...
[05:27] <Cybuss> logging out brb
[05:27] <omgitsmit> lotuspsychje: ubuntutweaks?
[05:27] <goose_> Just like when I put rainmeter on windows, that was a long night of customizing
[05:28] <lotuspsychje> omgitsmit: i never been able to make that work
[05:28] <omgitsmit> uh
[05:28] <omgitsmit> i just run it
[05:28] <goose_> Once I put the numix theme and icons I was happy
[05:28] <omgitsmit> and then select how big my epeen will be that day
[05:28] <lotuspsychje> omgitsmit: unity sidebar to bottom as docky right?
[05:29] <omgitsmit> lotuspsychje: im sure you can move it using tweaks
[05:29] <lotuspsychje> url? :p
[05:29] <omgitsmit> http://ubuntu-tweak.com/
[05:29] <lotuspsychje> no ubuntu-tweak cant do that
[05:29] <lotuspsychje> ive used it alot
[05:30] <diegoviola> how do I install ubuntu to a btrfs subvolume? the installer will just show me the partitions
[05:30] <omgitsmit> ppa:paullo612/unityshell-rotated
[05:30] <Cybuss> well with all the recommendations so far im very much happy, i got a heat indicator, load indator a switch for performance or powersaving, gnome style drop down. i do not think i need anything else
[05:30] <ROKO__> morning
[05:30] <omgitsmit> sudo apt-get install unityshell-rotated libnux-1.0-0
[05:30] <omgitsmit> rotate that shell bro
[05:30] <lotuspsychje> lemme look that up
[05:31] <goose_> f.lux. You need f.lux
[05:31] <goose_> Morning? Where are you? haha
[05:31] <omgitsmit> one thing ive learned, dont mention time of day in an public forum
[05:31] <goose_> How do I manage the programs that launch on startup?
[05:31] <omgitsmit> lol
[05:32] <goose_> lol
[05:32] <omgitsmit> i just search for start up
[05:32] <ROKO__> i have to ask about pwmconfig on ubuntu, it seems not work properly.. a lot of times i try to set up but it doesnt see fans. or when it seen and colocated when start fancontrol it doesnt increase speed when temperature is up..
[05:32] <goose_> I'm an idiot haha
[05:32] <ROKO__> any notes for that ?
[05:33] <diego1> how do I install ubuntu to a btrfs subvolume? the installer will just show me partitions
[05:35] <Cybuss> hey goose theres a program i can not remember what its called. but its in the ubuntu store. it lists all startup programs and it shows the ones that are normally hidden but are not important
[05:37] <lotuspsychje> Cybuss: sudo sed -i "s/NoDisplay=true/NoDisplay=false/g" /etc/xdg/autostart/*.desktop in terminal
[05:38] <lotuspsychje> Cybuss: then more startup items will show your list
[05:38] <goose_> Thanks man!@
[05:39] <jishjish> somsip: I think it worked but it didn't come up with any of the directories I was expected. I'll try it again later. Thank you !
[05:39] <goose_> wow that helped ALOT
[05:39] <Cybuss> there it is. thanks lotus
[05:39] <jishjish> try again running the command you mentioned.
[05:40] <Cybuss> i thought it was a program. bad memory...
[05:41] <lotuspsychje> goose_, Cybuss you can also disable unwated services manually like cups, by creating a file .override
[05:41] <azizLIGHT> im trying to change order of indicators on 14.04. i know where the order config is stored but it doesnt have the name of the applet. how do i figure out the name of the applet. this command isnt showing me the applet name like it usually does: dbus-send --type=method_call --print-reply --dest=com.canonical.indicator.application /com/canonical/indicator/application/service
[05:41] <azizLIGHT> com.canonical.indicator.application.service.GetApplications | grep "object path"
[05:41] <Cybuss> cups?
[05:41] <lotuspsychje> those old init.d programs arent very reliable and dont show them all
[05:41] <goose_> Oh I already knew that, but thanks man!
[05:42] <lotuspsychje> Cybuss: like printing services, if you dont need that on a laptop example
[05:42] <paul8star> hi
[05:43] <Cybuss> thanks again lotus
[05:43] <goose_> anyone got a good weather applet?
[05:43] <goose_> Can't find a decent one
[05:45] <lisa_> test
[05:45] <Prezident> yo
[05:45] <goose_> tyo
[05:46] <lisa_> yo
[05:46] <lotuspsychje> goose_, Cybuss preload is another great boost tool
[05:47] <Cybuss> yeah, its a double edged sword though, uses more ram, how ever it makes stuff start up faster, so if you got lots of excess rams + if not then -
[05:47] <goose__> okay I'm back
[05:47] <goose__> what were you talking about? Apparenlty I can't use my VPN and chat here
[05:47] <lotuspsychje> goose__: http://www.omgubuntu.co.uk/2014/10/install-weather-indicator-ubuntu-14-10
[05:48] <lisa_> testes
[05:48] <lotuspsychje> !test | lisa_
[05:49] <goose__> that's perfect! Thanks!
[05:49] <allstarsnorks2> Hi guys. How do I install GTK 3.12 on Xubuntu 14.04?
[05:51] <nickSwe> I am in the process of installing burg on Ubuntu 14.10... I have come to the step where it asks me: GRUB install devices:    I have 2 options:   /dev/sda   and /dev/sdb... which one should I check (if any) before I continue? I dont want to break my bootloader. I am running dual boot with Windows 7 and Ubuntu 14.10
[05:51] <lisa_> I'm sorry
[05:51] <lotuspsychje> !dualboot | nickSwe
[05:51] <lotuspsychje> lisa_: this is an ubuntu support channel, do you have ubuntu?
[05:52] <jimmyd> xubuntu I have a question about making room in the boot partition for an update it says The upgrade needs a total of 67.1 M free space on disk '/boot'. Please free at least an additional 3,556 k of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'.
[05:52] <lotuspsychje> allstarsnorks2: maybe the #xubuntu guys can help you while you wait?
[05:52] <nickSwe> lotuspsychje: How would that info help me? It says nothing about burg? or am I missing something?
[05:53] <lotuspsychje> !info bleachbit | jimmyd install and clean with this one
[05:53] <goose__> jimmyd: What's the question? That should work
 the fourms is currently not very active. I posted a question there with no avail.
[05:53] <somsip> jimmyd: Possibly due to old kernels? http://askubuntu.com/questions/2793/how-do-i-remove-or-hide-old-kernel-versions-to-clean-up-the-boot-menu
[05:53] <goose__> yes bleachbit is awesome
[05:54] <jimmyd> thanx guys
[05:54] <nickSwe> cant I just read the grub config to figure out where my grub is located?
[05:56] <lotuspsychje> !mbr | nickSwe never installed burg myself, maybe more info here
[05:56] <kib_> why is my VLC stuck sometimes in ubuntu
[05:56] <lotuspsychje> kib_: be carefull with vlc, its a security risk
[05:57] <diegoviola> lotuspsychje: how is vlc a security risk?
[05:57] <lotuspsychje> kib_: you using vnc over ssh?
[05:57] <Cybuss> vlc media player?
[05:57] <lotuspsychje> oh my bad
[05:57] <kib_> VLC is security risk? :o
[05:57] <lotuspsychje> nevermind was too quick
[05:57] <diegoviola> kib_: nobody can answer why vlc is stuck, are you playing a stream over the network or something like that? perhaps due to that?
[05:57] <lotuspsychje> kib_: did you try launch from terminal
[05:58] <Cybuss> i was scared for a second, ive used vlc so many times
[05:58] <kib_> no,,,just locally
[05:58] <_eddy> Morning guys. I am a web developer been doing this for over 4 years now. I want to set up my own hosting server for some of my projects, ideally i want to host atleast 70 per server. I have look at some articles online and some of them are years old. So I came here to ask you guys, what tools are you using both to set up the server and also fully secure it to the teeth. My budget is about £1000. THANK YOU
[05:58] <lotuspsychje> Cybuss: well actually if vlc is not updated, is also a risk
[05:59] <lotuspsychje> !server | _eddy
[05:59] <goose_> Quick quesiton. I'm setting up a temp monitor, is acpitz just my overall system temp (not hardware specific)?
[05:59] <kib_> i open VLC when its stuck from terminal like ,,,,      vlc & exit
[05:59] <lotuspsychje> thats weird
[05:59] <lotuspsychje> kib_: ubuntu and vlc version?
[05:59] <Cybuss> anything out of date is a security risk, how ever some updates have accident security holes
[06:00] <diegoviola> try mpv
[06:00] <nickSwe> I found this very nifty script http://sourceforge.net/projects/bootinfoscript/?source=typ_redirect   it scanned through my system and gave me a clear text saying where grub2 was installed! Awesome!
[06:00] <kib_> ubuntu 14.04.1 ,,, and Vlc ????
[06:00] <goose_> those damn zero days
[06:00] <lotuspsychje> kib_: anything interesting in syslog or dmesg?
[06:01] <lotuspsychje> kib_: maybe tail -f your logs and start vlc
[06:01] <kib_> diegoviola ,,,, is mpv good?
[06:01] <diegoviola> kib_: yes
[06:01] <kib_> Thanks guys,,,, i will try mpv
[06:01] <diegoviola> it's basically an improved version of mplayer
[06:02] <lotuspsychje> !info mpv
[06:02] <diegoviola> http://mpv.io
[06:02] <kib_> Sure
[06:02] <lotuspsychje> lookin nice
[06:03] <diegoviola> mpv is at 0.8.0, 0.4.2 is pretty old
[06:04] <hai> Can mpv play video with sub file .srt?
[06:04] <diegoviola> hai: yes
[06:04] <hai> thanks diego
[06:04] <allstarsnorks2> Do you guys think I will be able to update my GTK to 3.12 by using a tutorial for Ubuntu instead of Xubuntu?
[06:05] <lotuspsychje> allstarsnorks2: whats your end goal with this exactly?
[06:06] <allstarsnorks2> update my GTK 3.10 to 3.12, and install a theme that is supported for 3.12 and up
[06:06] <lotuspsychje> !themes | allstarsnorks2 maybe more info here
[06:06] <allstarsnorks2> I'm trying to install Paper theme
[06:07] <_eddy> lotuspsychje: #ubuntu-server doesnt exists
[06:07] <_eddy> lotuspsychje: got it now
[06:12] <hai> ubuntu server channel is empty
[06:12] <Tm_T> hai: 424 nicks there
[06:13] <_eddy> what is the different between 14.04 LTS and 14.10?
[06:13] <hai> I like using LTS
[06:13] <hai> I think it's more stable than 14.10
[06:13] <Tm_T> _eddy: 14.04 is supported for several years
[06:14] <_eddy> Tm_T: thats it?
[06:14] <lotuspsychje> !lts | _eddy
[06:14] <Tm_T> _eddy: of course 14.10 is newer release so there's plenty of changes software wise, but nothing radical that I can see
[06:18] <_eddy> lotuspsychj and Tm_T thanks. Was just curious. I have a 14.04LTS running on my vm
[06:19] <zergut> is there any wi-fi network analyzers somethin like inSSIDer
[06:19] <zergut> some like
[06:20] <zergut> for ubuntu ofc
[06:21] <lotuspsychje> zergut: for network packets analyze you can use wireshark
[06:21] <lotuspsychje> zergut: or you want ssid scanning?
[06:21] <jak2015> hi all
[06:22] <EriC^^> hi jak2015
[06:22] <jak2015> wich is the first step for checking why i am not connect to my server via ssh and not answer the ping ?
[06:22] <jak2015> note yesterday worked...
[06:23] <lotuspsychje> !info kismet | zergut
[06:23] <yuan1> hi
[06:25] <lotuspsychje> !info wavemon | zergut this one looking nice too
[06:26] <lotuspsychje> jak2015: maybe the ##networking guys can help you with that
[06:30] <jimmyd> that seems to have worked
[06:30] <somsip> jimmyd: which one?
[06:30] <jimmyd> the bleach bit one
[06:31] <somsip> cool
[06:31] <jimmyd> it was a graphical inter face
[06:32] <jc__> hello can you guys help me about installing f.lux on ubuntu?
[06:32] <jimmyd> i had to guess at the right boxes to check aftera few tries it worked
[06:32] <SohamG> For creating virtual machines, which program should I use? KVM, VMWare ar virtualbox?(or any other one)
[06:33] <somsip> SohamG: which ever suits your needs
[06:34] <Tw33k> SohamG: I prefer Virtualbox but each has its merits
[06:34] <diegoviola> I prefer KVM
[06:34] <hai> hi,what is grep command?
[06:34] <diegoviola> SohamG: what are you going to virtualize?
[06:34] <diegoviola> windows?
[06:34] <t3flon> hello
[06:34] <somsip> hai: man grep (it searches for patterns in lines of text)
[06:34] <Tw33k> t3flon: http://en.wikipedia.org/wiki/Grep
[06:35] <t3flon> I know what grep is
[06:35] <hai> thank you
[06:35] <t3flon> lol
[06:35] <Tw33k> sorry hai: http://en.wikipedia.org/wiki/Grep
[06:35] <t3flon> can someone help me explain a line
[06:36] <t3flon>  perl -p -i -e 's/complete/slide/g' master_wired.m3u8
[06:36] <t3flon> what exactly is perl doing here
[06:36] <diegoviola> you can do perl --help and see what each of those options do
[06:36] <t3flon> im familiar with perl language
[06:36] <t3flon> but not the command perl
[06:36] <somsip> t3flon: replacing occurences of complete with slide in that file, in place, globally
[06:37] <diegoviola> see `man perl` also
[06:37] <t3flon> thanks somsip
[06:38] <hai> thank you @t3flon
[06:38] <t3flon> when I man perl, it only tells me about the perl language
[06:38] <t3flon> which is why im confused about the functionality of the command perl in that line
[06:39] <somsip> t3flon: it's basically doing what sed does
[06:39] <t3flon> I see, could I run sed instead of perl there and get the same output?
[06:40] <somsip> t3flon: pretty sure so, yes
[06:40] <t3flon> thanks somsip
[06:41] <t3flon> for your l33t input
[06:45] <SohamG> diegoviola, sorry for the late reply.....I wanna virtualize different linux distro's and MAYBE windows and/or mac....
[06:45] <SohamG> diegoviola, should I use KVM as it seems to be 'made' for linux..?
[06:46] <diegoviola> KVM *is* part of the linux kernel itself
[06:46] <jimmyd> is that what you want to be running when you do it sohamG
[06:46] <diegoviola> and it's probably the fastest VM for that reason
[06:47] <diegoviola> SohamG: any of those tools will work for what you want to use though
[06:47] <SohamG> diegoviola, oh right.....might as well use kvm if its already there :P...
[06:47] <SohamG> have you had any issues with ti?
[06:48] <diegoviola> SohamG: when virtualizing linux with KVM/QEMU I simply use SPICE (spicec) to connect, when virtualizing Windows I enable RDP on the windows guest and connect to it with something like remmina, it works great
[06:48] <diegoviola> SohamG: no issues, worked great every single time I needed to use it
[06:49] <jak2000> my server not answer ping http://postimg.org/image/915p0r2g1/    its correct?
[06:50] <whatamidoing> Hi everyone, I'm new to Ubuntu and I was wondering if someone could help me. I am trying to install Ubuntu, but the installer doesn't detect my existing operating system (Windows 8), but I don't want to get rid of it until I know I like Ubuntu.
[06:50] <kib_> Check your BIOS setting
[06:50] <somsip> !who | kib_
[06:51] <kib_> dual boot should be enabled from BIOS
[06:51] <kib_> sure !ubottu
[06:51] <whatamidoing> kib_: Ah ok, thanks. I will check it out
[06:52] <somsip> whatamidoing: I have no experience of dual boot, but check these out https://help.ubuntu.com/community/WindowsDualBoot http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html
[06:53] <whatamidoing> somsip:  Thanks :)
[06:55] <somsip> whatamidoing: there are plenty of other guides and walkthroughs as it's a common issue, so read around a bit and make sure you are happy with the advice you are reading
[06:55] <whatamidoing> somsip: Will do
[06:57] <SohamG> diegoviola, thanks :)
[06:58] <diegoviola> sure, you're welcome
[06:58] <NetworkingPro> anyone know samba well?  Im trying to install/configure samba and having a terrible time getting it to work.
[06:59] <kib_> What is the best resource if I want to learn linux kernel's networking subsystem?
[07:00] <hai> same as kib_
[07:00] <somsip> !kernel
[07:00] <somsip> loads of links from there to places like kernel.org and suchlike
[07:00] <hai> I want to learn linux LPI 1
[07:01] <hai> Can somebody tell me what is the good resources
[07:01] <hai> Thank you
[07:04] <rpp601> hey guys, what command will tell me what version of linux this machine i'm logged into is running?
[07:05] <EriC^^> uname -r
[07:05] <EriC^^> rpp601: uname -a for a complete listing, and cat /etc/issue for the release info
[07:05] <rpp601> EriC^^: that tells me 3.10.23-xxxx-std-ipv6-64
[07:05] <Kipjen> hi
[07:06] <Kipjen> is there any one?
[07:06] <strehi_> lsb_release -a
[07:06] <kib_> rpp601: thats your kernel version
[07:06] <Prezident> Old kernel, latest is 3.19 http://www.kernel.org rpp601
[07:06] <Prezident> using 3.17.8-r1 myself
[07:06] <strehi_> uname -r tells you the kernel version... lsb_release a shows you distribution info
[07:07] <Kipjen> is there any one who can help me for my linux issue
[07:07] <Kipjen> ?
[07:07] <rpp601> kib_, Prezident, -a gives me Linux zion 3.10.23-xxxx-std-ipv6-64 #1 SMP Tue Mar 18 14:48:24 CET 2014 x86_64 x86_64 x86_64 GNU/Linux
[07:07] <Kipjen> please
[07:07] <rpp601> is it even ubuntu?
[07:07] <Prezident> I dont know
[07:07] <EriC^^> rpp601: nope, i think it's based on ubuntu though, check #zionos
[07:07] <Kipjen> yes ubuntu
[07:07] <Prezident> uname -a is not necassary for all distroys.
[07:07] <Prezident> you can try cat /etc/*release*
[07:07] <Prezident> works?
[07:07] <SohamG> diegoviola, can you send me the link to the guide you used for KVM?
[07:07] <rpp601> Kipjen: ask your question
[07:08] <Kipjen> thanks
[07:08] <Prezident> rpp601: do my command and you will find your answer
[07:08] <Prezident> PRETTY_NAME="Gentoo/Linux"
[07:08] <Prezident> will give you a reply something like this
[07:08] <Prezident> Name Id Pretty Name etc
[07:08] <Kipjen> i am able to access the internet but unable to ping any of the web sites and i have internet access through ubutu
[07:08] <rpp601> Prezident: ok cool, thanks! that told me what i needed to know
[07:09] <Kipjen> please help me to resolved this issue
[07:09] <Prezident> rpp601: wich distro was it? :)
[07:09] <rpp601> Prezident: kali
[07:09] <Prezident> Ok :)
[07:09] <rpp601> Prezident: :)
[07:09] <diegoviola> SohamG: I didn't really used one, but look at the arch wiki for QEMU and KVM, most of those are not distro specific and might work for ubuntu as well
[07:11] <strehi_> Kipjen: so if you connect to www.google.com trough browser it works... when you do ping www.google.com in the console it doesn't
[07:11] <strehi_> Kipjen: is that so?
[07:11] <Kipjen> yes
[07:11] <rpp601> Prezident: actually, i was logged in to more than one machine and ran the command in the wrong window! it was CentOS
[07:11] <Kipjen> u r right
[07:11] <Prezident> rpp601: i see, kali i never tried
[07:11] <Prezident> not a fan of centos neither
[07:12] <strehi_> Kipjen: That's really weird... I have never had an issue like that... But I can take a wild guess
[07:12] <Prezident> Kipjen: are you able to ping any ip?
[07:12] <Prezident> Is it just the dns wich isnt possible?
[07:12] <Kipjen> IP i can ping, it does not have any issue
[07:12] <Prezident> what happens if you type dig instead ping?
[07:13] <Prezident> Most likely you are looking at the lack of the DNS server in your settings.
[07:13] <Kipjen> all those ip are my local IP
[07:13] <Prezident> are you behind any proxy or vpn?
[07:14] <Prezident> I belive you are behind a firewall.
[07:14] <firelegend> Hi all. I run Ubuntu 12.04, I attempted to enable the location bar, both from gconf-editor and dconf-editor, the checkbox has been ticked for always-use-location-entry but there is no locatiob bar appearing.
[07:14] <solidus-1iver> exit
[07:14] <solidus-1iver> :X
[07:14] <strehi_> Kipjen: try ping 74.125.136.99
[07:15] <stikkemz> even if behind proxy, if he can ping ip but not domain name .. he should probably just set a dns
[07:15] <Prezident> stikkemz: yup
[07:15] <stikkemz> go with the standard google 8.8.8.8
[07:15] <Prezident> But he pinged his local ips he said.
[07:15] <Prezident> Thats fine behind a firwall.
[07:15] <Prezident> firewall
[07:16] <strehi_> I thought it's DNS problem... But in that case he also shouldn't connect trough the browser
[07:16] <Kipjen> 74.125.136.99 i checked , it does not work
[07:16] <strehi_> though so
[07:16] <strehi_> the problem is prolly your firewall
[07:16] <strehi_> it is blocking the ping port
[07:16] <stikkemz> what firewall are we talking about?
[07:16] <Kipjen> so how will i fix it
[07:17] <Prezident> Nobody knows, its an idea since we lacking information.
[07:17] <strehi_> Kipjen: do you have a local router?
[07:17] <stikkemz> lol
[07:17] <Prezident> lol what?
[07:17] <Kipjen> yes
[07:17] <Kipjen> but from router to ubuntu and from ubuntu to wsitch
[07:17] <stikkemz> sorry i was trying to catch up with the situation and your answer threw me an odd ball :))
[07:18] <strehi_> Kipjen: Do you have some other computer connected to the router?
[07:18] <strehi_> Kipjen: Try to ping it from there
[07:19] <Prezident> Kipjen: i gotta run soon, but take a look in
[07:19] <Prezident> resolv.conf whats under your nameserver?
[07:19] <themusicgod1> I've found a bug (though not to the point of having a patch to the bug) that affects like 6 different packages and is caused by at least 2 packages(same bug).  When creating a bug report in launchpad, should I have a) two bug reports (ie one for affected packages for being affected and one for the ones that are actually causing the problem) or 1?  or one bug per package?
[07:19] <Kipjen> i alreay checked that, its working
[07:20] <strehi_> cat /etc/resolv.conf
[07:20] <Prezident> Kipjen: then ceck your resolv.conf, dunno where it is located on  your os but try /etc/resolv.conf
[07:20] <strehi_> give us the output
[07:20] <Kipjen> but when i tried to ping through ubunto then i got ping problem
[07:20] <stikkemz> Kipjen, can you run in a terminal: netsh interface show interface and let us know what you see?
[07:21] <Prezident> cat /etc/resolv.conf | grep nameserver Kipjen type that in terminal
[07:22] <Kipjen> thanks i will do that...
[07:22] <Prezident> Aha, with such patiance he wont succeed, np
[07:23] <stikkemz> yeah he`s not approaching linux one should
[07:26] <strehi_> Kipjen: are you still here?
[07:26] <SailorReality> join ##poker for game
[07:26] <Prezident> lmao, dont join.
[07:27] <jamie_> hey my bluetooth is not not working properly
[07:27] <Prezident> why?
[07:27] <stikkemz> i mean the amount of info in "hey my bluetooth is not not working properly" is just too much mate
[07:27] <jamie_> not sure, has been working properly for the use of sixad, but when i switch it back to standard use its not connecting
[07:28] <jamie_> when i pull up the bluetooth panel it shows that it is on, but it will not connect to my keyboard of fxos phone
[07:28] <themusicgod1> jamie_: is this on a laptop?
[07:28] <jamie_> yes
[07:28] <themusicgod1> have you tried disabling & reenabling bluetooth via a keyboard shortcut?
[07:29] <jamie_> yes, its connected to my internet button
[07:29] <themusicgod1> ie does your laptop have an enable/disable bluetooth button?
[07:29] <themusicgod1> and that didn't work?
[07:29] <jamie_> i have a touch panel and the wifi and bluetooth are in the same part
[07:29] <themusicgod1> ok
[07:29] <jamie_> themusicgod1: no
[07:30] <themusicgod1> jamie_: what version of ubuntu?
[07:30] <jamie_> it works under sixad but not under blue-tooth
[07:30] <jamie_> 14.10
[07:31] <jamie_> gdm gnome 3 de
[07:31] <jamie_> if that helps at all
[07:33] <jamie_> bluetoothd version 4.101
[07:34] <stikkemz> have any of you guys manage to integrate facebook with ubuntu 14.10 accounts?
[07:35] <jamie_> that sounds like fun to try to figure out
[07:35] <themusicgod1> stikkemz: how recently?  I seem to remember doing so quite a few months ago
[07:35] <strehi_> I just use facebook chat using pidgin =)
[07:35] <strehi_> and gtalk of course
[07:36] <stikkemz> well at this point in time when i open the Online Accounts and click on Facebook it doesn't do anything, no errors no login screen nothing
[07:36] <jamie_> okay i now when i toggle the bluetooth switch in the ui its going right back after a second
[07:36] <stikkemz> just a black screen for a second then pops out of it
[07:38] <stikkemz> yeah i`ll do pidgin, though Jitsi is way cooler but has unmet dependencies
[07:38] <strehi_> stikkemz: even pidgin is really buggy in the newest version
[07:39] <strehi_> stikkemz: I had to compile the older version
[07:40] <stikkemz> strehi_,  i managed to get it rolling on the latest release, i just hate its lack of features..
[07:40] <strehi_> stikkemz: which features?
[07:40] <jamie_> im seeing if i can set it up under gnome3 de
[07:41] <stikkemz> strehi_, not sure if you can send files with it for starters.. and you can`t encrypt your chat if both parties use the program
[07:42] <strehi_> stikkemz: ah i see... I don't use these features so.... It's completly fine for me =)... In the newest version I have a problem that it's keep hanging
[07:42] <strehi_> when I minimize it to the try... It keeps hanging as soon as I close the active chat
[07:44] <stikkemz> strehi_, i`m getting that a lot in ubuntu 14.10 though but I knew what i was signing up for when not on the LTS
[07:45] <stikkemz> btw a little hint: for some reason they decided to remove Startup Applications in 14.10, but you still have it if you upgrade from 14.04 instead of a clean 14.10 install
[07:45] <jamie_> is there a way to reset the bluetooth daemon
[07:47] <jamie_> its saying there are no bluetooth adapters found on the system
[07:50] <xangua> stikkemz: I can see my startup settings on utopic, don't recall installing or removing anything extra
[07:51] <strehi_> stikkemz: I had the problem in LTS =)
[07:51] <jamie_> this is really getting annoying\
[07:51] <strehi_> stikkemz: I always stick to LTS distributions since I've moved from archy
[07:53] <jamie_> that was odd... now its working... it was not literally 20 seconds ago
[07:53] <Seveas> jamie_: bluetooth is magic
[07:53] <jamie_> im gonna dig deeper into this
[07:53] <Seveas> don't dig too deep, here be dragons
[07:54] <jamie_> lol
[07:54] <jamie_> not working again.... :\
[07:55] <Guest36115> Hello, has anybody ever heard of malicious programs running from un-allocated space on a hard drive?
[07:55] <Exploit> need help
[07:55]  * Exploit http://stackoverflow.com/questions/28601089/using-multiple-wordpress-installations-under-one-root-in-nginx
[07:56] <jamie_> Seveas: do you know much about blue-tooth problems
[07:56] <Seveas> jamie_: only that on any given system bluetooth either works flawlessly or is a royal PITA
[07:57] <jamie_> Seveas: it has been fine... but all of a sudden not so well
[07:57] <jamie_> the weird part is it was after i connected my fxos phone to it again
[07:58] <somsip> Exploit: I have no experience of nginx but wouldnt this be the same fix? http://stackoverflow.com/questions/24351114/nginx-multiple-subdomains-with-their-own-config
[07:58] <Slart> Guest36115: I find it hard to believe that the cpu would somehow run code that isn't allocated and reachable in some way.. or are you talking about something else running it? like hard drive controllers/gpu or something like that?
[07:58] <Exploit> lemme see thnx
[08:00] <jamie_> I was trying to switch to from my ps3 controller to my fxos phone to debug ota
[08:02] <poops> question about centos. hope its ok. ifconfig and system-config-network shows different eth number. how come?
[08:02] <Guest36115> More along the lines that I don't want to wait for a low level format on a drive if I don't have to. It's an old windows box, previous owner claimed it was loaded with virus.
[08:02] <hateball> !centos | poops
[08:02] <hateball> You depress me, ubottu
[08:03] <hateball> poops: This channel is for Ubuntu support, other distros go in their various channels
[08:03] <poops> sorry. thanks.
[08:04] <jamie_> any idea yall with the bluetooth
[08:04] <stikkemz> Guest36115, just do a quick format and you will be fine
[08:05] <Slart> Guest36115: I wouldn't worry about that at all, linux compatability isn't very high on malware-writers todo lists so even if the bad code would somehow end up in files that the system can actually read it wouldn't run.
[08:05] <Guest36115> Alright, thank you.
[08:07] <jamie_> okay i may know the cause... and its weird
[08:10] <jamie_> tell me if this makes any sense, as soon as I connect my flame the bluetooth says connected and then connection say no, and if i switch off the bluetooth its stops working for a little. I think it may be that the device is some how interfering with the laptop
[08:11] <jamie_> also is there a way to set up the computer to allow the device to browse internal files on the device
[08:13] <ToAruShiroiNeko> ello
[08:14] <jamie_> ToAruShiroiNeko: ello
[08:15] <ToAruShiroiNeko> EriC^^ you have a moment or two?
[08:15] <EriC^^> yeah sure
[08:15] <ToAruShiroiNeko> I am trying to detect the new harddrive I put into the server
[08:16] <ToAruShiroiNeko> but it doesnt show on ubuntu at all
[08:16] <EriC^^> did you try /var/log/syslog ?
[08:18] <EriC^^> ToAruShiroiNeko: try dmesg and /var/log/kern.log
[08:18] <EriC^^> to see if its picked up
[08:18] <ToAruShiroiNeko> okay
[08:19] <EriC^^> ToAruShiroiNeko: how did you try to detect it
[08:19] <ToAruShiroiNeko> I tried parted and few other linux commands
[08:22] <ToAruShiroiNeko> EriC^^ do you have a grep for me
[08:23] <ToAruShiroiNeko> its fairly long and detailed
[08:23] <EriC^^> ToAruShiroiNeko: try to unplug the hd if you can, then plug it in and check dmesg
[08:23] <ToAruShiroiNeko> EriC^^ it is entirely possible that I have to activate the drive inside bios somehow
[08:23] <fallout> Hello everyone. I'm in need of assistance. I've already searched the forums but I've found no fix. I'm wondering if someone here (who has expierenced the same problem) can help me?
[08:24] <stikkemz> fallout, you gave zero information on what your issue is
[08:24] <ToAruShiroiNeko> oh I am not phsyically near the drive yet
[08:24] <ToAruShiroiNeko> that'd be in 1.5 hours
[08:25] <ToAruShiroiNeko> EriC^^ what should I expect to see?
[08:25] <ackpacket> Having some rsync trouble... seems to wanna copy over all the files instead of making a snapshot like I want.  Here's the command i'm using:
[08:25] <ackpacket> rsync --progress --backup-dir=/Data/Documents/sen_server_backups/2-19 -bvan /mnted /Data/Documents/sen_server_backups/2-18/
[08:25] <EriC^^> ToAruShiroiNeko: something like [187733.172260] sd 7:0:0:0: Attached scsi generic sg2 type 0
[08:25] <fallout> Sorry about that. I was typing it out. I'm trying to install Ubuntu 14.04.1 on my Windows 7 computer. It completes the download of the iso and I get an error. "Permission denied" is the error
[08:26] <ackpacket> If I'm interpreting that command correct, it will copy into 2-19, every file in /mnted that is of a newer modified-time or different size than it's twin in 2-18, is that right?
[08:26] <EriC^^> ToAruShiroiNeko: kern.log might mention something about trying to set modes for it or something while booting
[08:26] <fallout> Sorry about my grammar and spelling. It's really late here and I haven't slept much for the last few days
[08:26] <jamie_> fallout: what exactly are you doing
[08:26] <ToAruShiroiNeko> trying to grep dmesg for attached
[08:26] <fallout> What do you mean?
[08:27] <stikkemz> fallout, not sure when you are getting that error
[08:27] <jamie_> that is what i am saying
[08:27] <stikkemz> what exactly are you doing when you see that error
[08:27] <fallout> Okay. I'm sorry. I'm starting the download of Ubuntu. Let me go back to my main computer and I'll type out the steps as to how the error appears
[08:27] <EriC^^> ToAruShiroiNeko: does cat /proc/partitions mention anything?
[08:28] <ToAruShiroiNeko> just sda
[08:28] <ToAruShiroiNeko> I should see an sdb I imagine
[08:28] <jamie_> fallout: if you are installing it should be from a boot cd or a flash drive
[08:28] <EriC^^> ToAruShiroiNeko: try to grep kern.log for sdb
[08:28] <ToAruShiroiNeko> I am not very grep proficient yet
[08:28] <ToAruShiroiNeko> let me look it up
[08:29] <EriC^^> grep -C20 sdb /var/log/kern.log
[08:29] <ToAruShiroiNeko> well
[08:30] <ToAruShiroiNeko> I had went for grep -a sdb grep /var/log/kern.log :)
[08:30] <fallout> It is from a flash drive. I can't get it to boot from the flash drive. I've installed Ubuntu by extracting it to my desktop before.
[08:30] <ToAruShiroiNeko> yours give more information
[08:30] <ToAruShiroiNeko> the sdb it mentions is for a kingston datatraveler
[08:30] <ToAruShiroiNeko> which was indeed the usb I used for live cd
[08:30] <fallout> This time I got the error; "Can not download the metalink and therefore the ISO"
[08:30] <ToAruShiroiNeko> when I was strugling with boot
[08:31] <stikkemz> ToAruShiroiNeko, you should probably see if the device is present if you ls -l in /dev/disk/by-id/
[08:33] <ToAruShiroiNeko> sd 7:0:0:0: [sdb] Attached SCSI removable disk
[08:33] <jamie_> fallout: have you tried to just make a boot img
[08:33] <ToAruShiroiNeko> EriC^^ this one seems it
[08:33] <ToAruShiroiNeko> I havent initilised the disk yet
[08:33] <ToAruShiroiNeko> its straight out of the package
[08:33] <fallout> jamie_, how would I go about doing that?
[08:33] <EriC^^> ToAruShiroiNeko: i see
[08:34] <jamie_> fallout: just download the version you want from the ubuntu site you choose a program you want to use to create the img and put it on the flash drive
[08:34] <ToAruShiroiNeko> in windows you cannot do anything with a disk until you initilise it
[08:34] <stikkemz> get unetbootin or something and make a bootable drive
[08:34] <fallout> jamie_: I'll try that. Thank you
[08:35] <stikkemz> then go in bios and set it to boot from usb drive on a higher priority
[08:35] <ToAruShiroiNeko> which writes mbr/gpt even if the drive remains unformatted
[08:35] <jamie_> fallout: oh and you may run into a thing when you go to boot from the usb that says error cannot find com32
[08:35] <jamie_> just type           live
[08:37] <jamie_> stikkems: thanks I have not been on windows in quite a while and have no clue what programs to yse
[08:37] <ToAruShiroiNeko> EriC^^ would that be it?
[08:37] <jamie_> *use
[08:37] <ToAruShiroiNeko> should I see it more often?
[08:37] <jamie_> sorry i spelled you name wrong stikkemz
[08:38] <stikkemz> jamie_, 20$ says he`s gonna lose all his data
[08:38] <ToAruShiroiNeko> that entry was from yesterday at 9:54
[08:38] <ToAruShiroiNeko> about when I inserted the drive
[08:38] <jamie_> stikkemz: that is not a fair bet, he is
[08:38] <ToAruShiroiNeko> why bet only 20$ ?
[08:38] <shaarad> Hello, I have made an executable JAR file which is a GUI application. I want it to launch on ubuntu startup.. How to do it?
[08:38] <jamie_> no thanks, i know that is a loosing bet
[08:39] <EriC^^> ToAruShiroiNeko: dmesg | grep -C20 Attached
[08:39] <EriC^^> ToAruShiroiNeko: what else does it say?
[08:39] <ToAruShiroiNeko> I only see an attached for sda
[08:39] <jamie_> I have been using ubuntu since 9.4 i think it was, im not dumb, when you install the now os unless you some how copy the file system you will lose it
[08:39] <ToAruShiroiNeko> [    1.512798] scsi 6:3:0:0: Attached scsi generic sg0 type 12
[08:39] <ToAruShiroiNeko> [    1.512935] sd 6:0:0:0: Attached scsi generic sg1 type 0
[08:39] <EriC^^> ToAruShiroiNeko: where did you get the attached for sdb? kern.log?
[08:40] <ToAruShiroiNeko> [    2.154449] sd 6:0:0:0: [sda] Attached SCSI disk
[08:40] <ToAruShiroiNeko> yes in kern.log
[08:40] <ToAruShiroiNeko> it may be for my usb flashdrive
[08:40] <shaarad> I tried adding it to /usr/local/bin
[08:40] <yuan> Stable release 0.91 intended for production use is available.
[08:40] <ToAruShiroiNeko> also what is the nuber 2.154449 ?
[08:41] <jamie_> stikkemz: i was flashing a new image to my other hdd the other day and that is how i know about he com32 problem... it took a little bit to figure out the solution
[08:42] <yuan> inkscape 0.91
[08:42] <yuan> deb http://ppa.launchpad.net/inkscape.dev/stable/ubuntu YOUR_UBUNTU_VERSION_HERE main  deb-src http://ppa.launchpad.net/inkscape.dev/stable/ubuntu YOUR_UBUNTU_VERSION_HERE main
[08:42] <stikkemz> jamie_, i never encountered it myself
[08:42] <jamie_> stikkemz: neither had I till the other dady
[08:42] <jamie_> **day
[08:42] <jamie_> stikkemz: its funny i found the solution down stream from ubuntu
[08:43] <leeyaa> hello
[08:43] <stikkemz> jamie_, i will be reminded of this conversation when i will hit that wall
[08:43] <fallout> jamie_: Thank you so much! It's working now
[08:43] <jamie_> fallout: did you run into the com32 issue
[08:43] <leeyaa> how to find out which package is part of this file /etc/logrotate.d/libvirtd.lxc
[08:44] <fallout> jamie_: Nope. I'm at the normal screen thingy. Anyways, I've installed Ubuntu on another one of my computers before. I know what to do from here. Thanks for the help
[08:44] <jamie_> fallout: okay np
[08:44] <jamie_> wtf why did i run into it then!!!
[08:45] <jamie_> i tried dd, startup disk creator, disk image creator, and unetbootin
[08:45] <stikkemz> jamie_, hey man, it`s not linux if it doesn't trip you off once in a while
[08:46] <jamie_> stikkemz: good point that is the fun of it
[08:46] <jamie_> stikkemz: high usability comes at a cost some times
[08:47] <EriC^^> ToAruShiroiNeko: it's the seconds since startup
[08:48] <stikkemz> jamie_, i run dual boot with windows 8.1.. Most of the time i sit in ubuntu cuz you get to do all these great things for free with just a few key strokes.. but there`s always that one in 100 thing that you wish you had windows for it
[08:49] <brainm> Is there in ubuntu analog of debian util debsecan?
[08:49] <jamie_> stikkemz: i find a way to make it work, i have not used windows since ubuntu 9.4, I spend to much time fixing other peoples windows i dont want my own
[08:49] <White_Cat_mobil_> Ah. I'll hop into my ride. Should be back in 30
[08:50] <jamie_> stikkemz: I dont think ubuntu likes my phone though......
[08:50] <White_Cat_mobil_> Mins
[08:50] <stikkemz> jamie_, you say you can always make it work.. go buy an nvidia card and we`ll talk after
[08:50] <strehi_> Did anyone here ever create a game using inkscape, gimp and java or c++?
[08:50] <jamie_> stikkemz: I have one from the gseries
[08:50] <stikkemz> jamie_, gt540m here.. pain in the arse!
[08:50] <jamie_> i will say the nvidia 331 bug is a pain but there is a work around
[08:51] <stikkemz> jamie_, the only way i managed to make it work is with bumblebee
[08:51] <jamie_> stikkemz: i just run sudo apt-get install --reinstall nvidia-331
[08:52] <jamie_> i just have to do it every time after the kernal update
[08:52] <jamie_> stikkemz: or when the try to update the graphics support... i have NVS 3100M/PCIe/SSE2
[08:52] <jamie_> i thought i had another one.. whoops
[08:53] <jamie_> stikkemz: does the nvidia 331 bug affect you also
[08:55] <stikkemz> jamie_, not sure what bug you are talking about.. most of the nvidia drivers simply don't work and the ones that do give video tearing on everything, including moving windows around which, saying to be annoying is an understatement..
[08:55] <stikkemz> jamie_, at least for my card
[08:55] <jamie_> stikkemz: its a problem with the graphics drivers, but mine is fine, i run steam all the time
[08:56] <jamie_> stikkemz: i will say with my setup its kinda funny to watch startup and login and look at the system details... :p
[08:56] <stikkemz> jamie_, i do too.. but i run steam from nouveau and optirun the games
[08:57] <jamie_> stikkemz: i natively run steam off my grapics card\
[08:57] <stikkemz> jamie_, i guess yours has better support then
[08:57] <BlackVenom> Good morning
[08:58] <BlackVenom> Does anyone know what this means on irc
[08:58] <BlackVenom> Closing link: (textual@cpc67682-pres16-2-0-cust243.18-3.cable.virginm.net) [Registration timeout]
[08:58] <jamie_> stikkemz: no clue, let alone i am runing a diffent dm and have several different de is kinda funny that it works so well
[08:58] <stikkemz> jamie_, what dm are you running?
[08:58] <jamie_> stikkemz: gdm
[08:58] <stikkemz> jamie_, and why?
[08:59] <jamie_> stikkemz: and litteraly other than i like the look, because i can
[08:59] <ryu13212> hello
[09:00] <jamie_> stikkemz: me and someone on here the other day literally got bord and decided to see how much we could manipulate and change ubuntu
[09:00] <stikkemz> jamie_, oh i thought there was a performance aspect to your decision
[09:01] <jamie_> stikkemz: well actually i think gdm uses more
[09:01] <jamie_> i also have kdm and xdm
[09:01] <jamie_> stikkemz: oh and of course i have lightdm
[09:02] <jamie_> stikkemz: one sec let me list the different de i have lol
[09:02] <stikkemz> hmm gdm uses Wayland?
[09:02] <stikkemz> jamie_, i thought wayland is still in it`s early stages
[09:02] <jamie_> not sure
[09:03] <jamie_> stikkemz: all i know is that i really like the feel of gdm and gde
[09:03] <jamie_> i dont know much about the dev stage its in i know that its only on gnome 3
[09:04] <stikkemz> jamie_, i just run lightdm with a numix theme that really pops out
[09:04] <jamie_> stikkemz: in my opinion themes do not do much other than icons
[09:04] <stikkemz> jamie_, yeah but as long as it looks ok, i`m good with that
[09:05] <jamie_> stikkemz: i have gnome, plasma workspace, kubuntu desktop, cinnamon, xubuntu desktop, unity and two others i dont use very often other than for maintenance
[09:06] <jamie_> stikkemz: my problem is i like to take stuff and see how much i can change it and mess with it
[09:06] <stikkemz> jamie_, you wouldn't be using linux otherwise..
[09:07] <jamie_> stikkemz: :) yep let alone my mozilla work is based around linux
[09:08] <stikkemz> jamie_, but you really got me searching for a display manager that runs on wayland
[09:08] <jamie_> stikkemz: let me take a look
[09:10] <jamie_> stikkemz: yes gde uses wayland and a lot of others are in testing/experimental
[09:10] <stikkemz> jamie_, the idea is that x11 basically has a server running that doesn't actually do anything but pass things around between buffers where wayland actually runs the whole thing on the server
[09:12] <jamie_> stikkemz: i know i kinda wanna see if i can get it to run under tty8
[09:14] <jamie_> stikkemz: apparently wayland has an official rep on ubuntu
[09:14] <White_Cat> back
[09:14] <hey_joe_> so theres a lot of hype it seems about http/2. so I did some googling and saw I could run http/2 to serve static content with nghttpx in Ubuntu in replacement of my nginx server. However I use Wordpress for all of my sites, and MariaDB(reduces mem usage a little on my crappy VPS). So, with nghttpx, I can't server PHP content. Perhaps with this nghttpx proxy, or what have you (scarcely any documentation from what i can find) I
[09:14] <hey_joe_>  can use it as a front end for nginx to sever the PHP Wordpress pages. Any suggestions? Goal here is to reduce overall mem usage of daemons.
[09:14] <White_Cat> EriC^^ okay so should I detach and reattach the drive?
[09:15] <stikkemz> jamie_, i`m actually gonna give it a shot
[09:15] <jamie_> stikkemz: same
[09:15] <hey_joe_> to backup this up a little, I did do some testing and saw a huge performance increase when serving pages with nghttpx over nginx HUGE actually
[09:15] <jamie_> stikkemz: do you want the command
[09:16] <jamie_> stikkemz: one sec, switching to wayland brb
[09:17] <stikkemz> jamie_, yeah gimme the command lol
[09:17] <jamie_> stikkemz: sudo apt-get install libwayland0
[09:17] <jamie_> stikkemz: once sec switching real fast
[09:20] <jamie_> its not working i gonna do more searching
[09:21] <stikkemz> jamie_, you probably need to install the server too
[09:21] <jamie_> stikkemz: it didnt seem to work for me... i might have to use the gnome version on mine... lol
[09:21] <jamie_> stikkemz: i may have to use the gnome verson due to my setup
[09:24] <stikkemz> jamie_, i know i`m too tired for this cuz i have my web pages on 150% zoom
[09:24] <jamie_> stikkemz: lol same... its 4:30 am here
[09:25] <stikkemz> jamie_, 11:30 here, up for over 20 hours
[09:25] <jamie_> im right there with you... i got up at six am to knock out some of my mozilla work before going to file my tax returns
[09:26] <stikkemz> jamie_, yo mentioned it before, do you work for mozilla?
[09:26] <jamie_> stikkemz: i work on the firefox os
[09:27] <mR_T-RSA> Hi, Im on connect on a varsity wifi network. We do have proxy servers with authentication to configurer on our devicesn.  I am un familiar about how to set this up on ubuntu. With android this is done automatically.  Will i still need to configure the proxy on my laptop if im tethered to my android device?
[09:28] <stikkemz> jamie_, oh.. firefox lost me a few years ago when they changed the interface a lot and nowadays i really find chrome to suit my needs better (this is coming from a web dev)
[09:28] <jamie_> stikkemz: i work on the phone
[09:30] <jamie_> stikkemz: its funny because we recommend using ubuntu for working on the fxos phone
[09:31] <vilce> why I got permission denied when setting acl on NFS mount with acl enabled?
[09:31] <jamie_> stikkemz: have you tried developers edition
[09:31] <White_Cat> EriC^^ I did detach and reattach the drive
[09:31] <White_Cat> it did seem to power up
[09:31] <White_Cat> its a server so I may have felt the vibrations of everuthing else
[09:32] <White_Cat> it did feel warm though so it should be on for a while
[09:32] <stikkemz> jamie_, yeah.. don't get me wrong, ff is a great browser, but it has some awkward bugs in its engine, that webkit doesn't
[09:33] <jamie_> stikkemz: you mind elaborating, i would be more than happy to pass it onto the qa team
[09:34] <White_Cat> EriC^^ what should I try?
[09:35] <jamie_> stikkemz: also when was the last time you used firefox developers edition
[09:37] <stikkemz> jamie_, idk, a while ago.. but between sublime text and chrome i have all the tools i need. I recall a weird issue in ff with multiple shadows a while back that didn't quite allow me to get the same quality that i got out of webkit
[09:38] <stikkemz> jamie_, and most recently image loading from gallery3 on ff is a mess
[09:38] <jamie_> stikkemz: hey i would recommend trying again if you have not it awhile, it has came quite far
[09:40] <stikkemz> jamie_, the only thing i really like firefox for is the privacy.. that is indeed a trade off when using chrome
[09:41] <jamie_> stikkemz: the whole phone projet is based around it also
[09:41] <jamie_> stikkemz: hey you said you are a web developer right
[09:41] <stikkemz> jamie_, also, why do they run all the tabs in the same process? it basically makes swap useless
[09:42] <k1l_> stikkemz: there is chromium in the repos which is chrome codebase without the google stuff.
[09:43] <jamie_> stikkemz: im not sure about that, I have enough ram that i have swap dissabled and i dont have a ssd
[09:44] <stikkemz> k1l_, yeah but chrome also includes the proprietary software
[09:44] <jamie_> stikkemz: you said you are a web developer right
[09:45] <stikkemz> jamie_, not as a full time job but yeah.. mostly project based
[09:45] <stikkemz> jamie_, when i have the time for it
[09:46] <jamie_> stikkemz: i could not pay you, but if you could give me a hand with a project, i only know minimal html and i am trying to build a facebook app for firefox os
[09:46] <jamie_> it would be greatly appriciated, and you would get credit for and and probably a device from it
[09:47] <stikkemz> jamie_, keep talking ..
[09:48] <stikkemz> jamie_, i have no clue how firefox os works though
[09:48] <jamie_> stikkemz: its all in html5 and java script
[09:48] <aLeSD> hi all
[09:48] <aLeSD> how could I sed as default compiler c++ distcc ?
[09:48] <jamie_> stikkemz: fxos is a web standard phone
[09:49] <k1l_> jamie_: stikkemz better put that topic into the firefox phone channel? (if there is any on freenode)
[09:49] <jamie_> k1l_: sorry there is not
[09:49] <jamie_> i know that for a fact
[09:49] <HateDread> Hey, I'm super new to Ubuntu and trying to follow this tutorial. I have 0 idea how to accomplish step 12; http://affy.blogspot.com.au/2007/09/setting-up-ubuntu-perforce-server.html
[09:49] <HateDread> Any advice would be super
[09:50] <HateDread> Under 'Configure Perforce', I mean
[09:50] <MaxFrames> hello
[09:50] <MaxFrames> can you tell me if these informations are still current and accurate? http://www.tuxtrix.com/2014/10/install-sonicwall-netextender-vpn.html
[09:50] <jamie_> stikkemz: are you interested at all
[09:50] <MaxFrames> I am looking for a client to connect from a lubuntu machine to a sonicwall vpn
[09:51] <stikkemz> jamie_, so wait, it`s an os that runs basically a browser as it`s starting point and you need an app for a website that is, well, viewable in the browser?
[09:51] <virtualer> hello! i am trying to install ubuntu using virtual box on windows 7 but i keep fialing :(
[09:51] <virtualer> after following this guide http://www.psychocats.net/ubuntu/virtualbox
[09:51] <virtualer> ubuntu 14 lts has an internal error
[09:52] <jamie_> stikkemz: it would be built around its own app but by reading the website code from facebook and in producing a output to push updates
[09:52] <Squall5668> MaxFrames: still accurate
[09:52] <stikkemz> jamie_, so using the fb api
[09:52] <Mackan90096> I managed to boot from a live usb. How do I fix my corrupt hdd?
[09:53] <k1l_> !ot | jamie_ stikkemz
[09:53] <jamie_> stikkemz: yes and push updates to the phone via apis email me or something at charja13@live.com
[09:53] <Seveas> Mackan90096: if your harddisk broke: throw it out, buy a new one and restore from backup.
[09:53] <virtualer> i get some error codes but i cant understand them
[09:53] <stikkemz> k1l_, omg man ok, sorry.. we`ll go private
[09:53] <virtualer> such as executable path /usr/bin/compiz
[09:53] <HateDread> Just don't know how to 'Add the following lines to the end of /etc/profile.'
[09:53] <HateDread> Is that like a text append or something?
[09:54] <k1l_> HateDread: yes
[09:54] <Mackan90096> I don't have any backups Seveas. And, It's a laptop.
[09:54] <virtualer> compiz crashed with sigill in poll()
[09:54] <Seveas> HateDread: keep in mind that that document is 7.5 years old. It may be obsolete.
[09:54] <virtualer> have i come to the right place?
[09:54] <HateDread> Seveas: I couldn't find much that would help a total Ubuntu noob with it
[09:55] <Squall5668> virtualer: not really. It sounds like you forgot to accelerate 3D in virtualbox though
[09:55] <Seveas> Mackan90096: call it a learning moment then :) You can try to make a backup now by mounting the harddrive and rsyncing to another host.
[09:55] <Squall5668> virtualer: haven't used virtualbox for years, so i might be wrong
[09:56] <Seveas> HateDread: why are you trying to set up perforce? Join us in the wonderful world of git instead ;)
[09:56] <HateDread> Seveas: No thanks :p
[09:56] <virtualer> Squall5668, how would you run ubuntu on a windows machine?
[09:56] <Seveas> HateDread: I had a quick look at that tutorial, it seems to make sense mostly, so just open /etc/profile in an editor with sudo and add the lines.
[09:56] <Mackan90096> Seveas, The other hard drive is the internal, it got corruped after I shut the computer off when it was compiling.
[09:56] <Squall5668> virtualer: I use vmware, but that's offtopic :)
[09:56] <HateDread> Seveas: How do you open it in an editor? Internet said 'gedit'?
[09:57] <Seveas> HateDread: gedit will do. gksudo gedit /etc/profile
[09:57] <virtualer> so where should i ask for assistance in installing ubuntu if not on this channel?
[09:58] <Ben64> virtualer: installing ubuntu you ask here, but you're talking about running it in windows?
[09:58] <k1l_> !details | virtualer
[09:58] <Seveas> k1l_: he's using cirtualbox on windows :)
[09:58] <Mackan90096> I found something about fsck.. But I don't know what drive it is....
[09:59] <HateDread> Seveas: gksudo gedit /etc/profile gives me 'Gt-kWARNING **: cannot open display:'
[09:59] <k1l_> Seveas: yes, but installing ubuntu on vbox should not bring errors
[09:59] <virtualer> Ben64, i have to run windows in my company computer but i would like to develop on linux so i have to use some virtual something to run both at the same time
[10:00] <Seveas> virtualer: I'm not too surprised compiz causes issues when virtualized. Try a dual boot, or just running from a live usb,  and see if that works.
[10:00] <Seveas> HateDread: does your Ubuntu even have a gui?
[10:00] <virtualer> live usb?
[10:00] <HateDread> Seveas: Nah it's over putty / ssh (sorry I should have said so)
[10:00] <Seveas> virtualer: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows
[10:01] <MaxFrames> Squall5668: do you reckon the same procedure will work on lubuntu as well as on ubuntu?
[10:01] <Squall5668> virtualer: Like i said, try messing around with graphics accel. options in vbox, up the vram and try installing guest additions on it. It'll probably work
[10:01] <Seveas> HateDread: ah then you'll need to use a console editor :) sudo nano /etc/profile
[10:01] <Mackan90096> And Gparted only gives me the usb
[10:03] <Squall5668> MaxFrames: Can't see why it wouldn't. Pretty sure it'll be fine
[10:03] <Mackan90096> So, What should I do?
[10:04] <Seveas> Mackan90096: does sudo fdisk -l show the internal disk?
[10:05] <MaxFrames> thanks
[10:05] <Mackan90096> I don't know Seveas, It shows four lines..
[10:06] <Squall5668> MaxFrames: not a prob. Btw, how can you live with sonicwall vpn? Happy I got away from it.
[10:06] <Mackan90096> it shows /dev/sda1 to 4
[10:07] <Mackan90096> and over that, it shows my usb wich I'm running it off
[10:07] <Seveas> Mackan90096: pastebin the output.
[10:08] <Mackan90096> I'll trt
[10:08] <Mackan90096> try *
[10:10] <Mackan90096> Seveas, http://hastebin.com/xupeqadiru
[10:12] <snadge> h264 in firefox on ubuntu 14.10 (current) isn't working for me.. have i broken something? or uninstalled a dependency.. or is this a known issue?
[10:13] <Mackan90096> So.. What to do Seveas?
[10:13] <snadge> when i go to youtube.com/html5 .. i have a red ! next to h264
[10:13] <jacobian> Is there a way in the gui to get Alt-Gr mapped to Alt?
[10:13] <jacobian> This used to be an option in settings
[10:13] <Seveas> jacobian: it's not anymore?
[10:13] <bazhang> !find h264
[10:13] <avinson> is there an ubuntu installer with restricted drivers available? i have a 2009 mac mini that needs a restricted wifi driver.. no way to install it unless the wifi works :(
[10:13] <jacobian> It doesn't appear to be an option anymore (in 14.10)
[10:14] <avinson> specifically i need bcmwl-kernel-source
[10:14] <Seveas> jacobian: hmm. Looks like they gutted lots of things from the settings dialog...
[10:14] <avinson> but it's not available on ubuntu server 14.04 installer image
[10:17] <jacobian> It looks we're back to setxkbmap territory
[10:17] <jacobian> Curious that they gutted all that stuff
[10:17] <Mackan90096> Seveas?
[10:17] <jacobian> It's supremely irritating as an emacs users .
[10:18] <Seveas> jacobian: I hear you. Maybe ubuntu-tweak can help you, but I've not used it so far.
[10:19] <Seveas> jacobian: or something in gsettings. I usually map alt gr to compose, and gsettings shows this:
[10:20] <Seveas> org.gnome.desktop.input-sources xkb-options ['compose:ralt', 'caps:none', 'altwin:left_meta_win']
[10:20] <Seveas> maybe 'alt:ralt' or something
[10:20] <Mackan90096> Seveas ! What should I do?
[10:21] <Seveas> Mackan90096: you should at least not be impatient :-)
[10:22] <jacobian> I like to have compose on my caps lock
[10:22] <jacobian> Which I never use
[10:22] <jacobian> (as a capslock key)
[10:22] <Squall5668> avinson: You can grab the package put it in a usb and install it manually. There is no ubuntu image with it preinstalled
[10:22] <Mackan90096> Alright then Seveas. I just want to get it working again :P
[10:22] <Cybuss> i have a question, i keep messing up my gui, is there anyway i check and makesure im not breaking stuff?
[10:22] <Seveas> Mackan90096: looks like your disk is quite broken.
[10:23] <Mackan90096> Yeah
[10:23] <Mackan90096> It got corruped when I shut my computer down while compiling.
[10:23] <Seveas> you can try mounting those partitions and see if you can find anything, but none of them identify as linux partitions
[10:24] <Seveas> I'm not going to help any further, this rabbithole is deeper than I have time for.
[10:24] <Mackan90096> I tried mounting them, didn't work..
[10:24] <MaxFrames> Squall5668: I have never used it yet. I'm configuring an appliance which was bought years ago and then never used, for some reason. If it was me, I'd use pfsense + openvpn
[10:26] <avinson> Squall5668: ok that's what i was thinking.. thanks
[10:27] <HateDread> I used 'wget http://www.perforce.com/downloads/perforce/r10.2/bin.linux26x86/p4d' to get the p4d file, then 'chmod +x p4d' to make it executable. After doing that, even in the directory it's in; 'no such file or directory'
[10:27] <Squall5668> MaxFrames: I see. Good luck. I have only used the small tz series, but I hate the vpn. If I were you, i'd set up a vpn server behind it
[10:28] <HateDread> I swear I just put it there! 'ls' lists the file in the /usr/local/bin directory
[10:31] <HateDread> Also ldd on p4d is saying 'not a dynamic executable', What does any of that meaan. The file is right there and I'm typing the name exactly
[10:32] <White_Cat> EriC^^ I amanaged to detect the second drive
[10:32] <White_Cat> I had to configure it as a single drive raid 0
[10:32] <White_Cat> which feels bizzire still
[10:33] <HateDread> Seveas: You still around, man?
[10:34] <White_Cat> okay so now I am probably going to need to congigure backup finaly
[10:35] <generalbadwolf> Quick Q: Mixing newer AMD and NVidia cards
[10:35] <White_Cat> EriC^^ do you have any suuggestions for me?
[10:35] <generalbadwolf> Dont want to SLI, just two Xservers capable of hardware
[10:35] <White_Cat> I am thiking of a GFS sceheme
[10:37] <White_Cat> rsnapshot any good?
[10:40] <umbra_purus> hey
[10:40] <umbra_purus> can someone help me?
[10:40] <umbra_purus> can someone help me with a issue i have?
[10:40] <k1l> !details | umbra_purus
[10:41] <White_Cat> !details ubottu
[10:41] <White_Cat> smart
[10:41] <popey> White_Cat: i use rsnapshot every day for my backups, works for me
[10:41] <umbra_purus> Okay. I want to send files to my phone with ubuntu. How do I do that?
[10:42] <popey> umbra_purus: what kind of phone?
[10:42] <White_Cat> popey I have a new drive and I need to configure it too
[10:42] <umbra_purus> Android. gt9301I
[10:42] <White_Cat> it will be exclusively for backup
[10:42] <White_Cat> any suggestions?
[10:42] <umbra_purus>  popey: Android. gt9301I
[10:42] <popey> umbra_purus: I have heard some people say gmtp is a good app for transferring files to their android device
[10:43] <bazhang> it is
[10:43] <umbra_purus> popey: no but I want to learn how to do it in a terminal window. is that possible?
[10:43] <bazhang> !info gmtp
[10:44] <popey> umbra_purus: i have not done that, sorry.
[10:44] <yuan> ubuntu install tool loadown?
[10:44] <k1l> umbra_purus: use adb
[10:45] <umbra_purus> k1l: how do i use adb. can you refer something that I can start from?
[10:45] <k1l> adb push. its the android debug bridge. it can push and pull files and other stuff.
[10:45] <fidel_> yuan: can you rephrase your question?
[10:46] <k1l> umbra_purus: http://developer.android.com/tools/help/adb.html
[10:47] <diegoviola> hi
[10:48] <diegoviola> is there a way to configure ubuntu in such a way that it will never remmeber browser history, passwords, etc, anything?
[10:48] <Mackan90096> How do I make my corrupted drive into a linux partion without deleting anything on it?
[10:48] <bazhang> diegoviola, run it from live usb
[10:49] <bazhang> Mackan90096, you dont
[10:49] <diegoviola> bazhang: there's no other way?
[10:49] <Mackan90096> bazhang, oh?
[10:49] <Mackan90096> Can I recover the files in any way?
[10:49] <bazhang> diegoviola, save nothing at all?
[10:49] <Squall5668> diegoviola: maybe you mean configure firefox that way? and not Ubuntu
[10:49] <Mackan90096> I currently have my laptop booted from a live usb
[10:50] <umbra_purus> k1l: thanks
[10:51] <diegoviola> bazhang: nothing at all
[10:54] <Cybuss> okay i have a flickering problem with some things, it seems to have been partly resolved by forcing complete redraw work around in compiz, is this the only way to solve this issue?
[10:55] <bry8knight> hi
[10:56] <White_Cat> I have an ubuntu server 14.04 and am thinking of which scheme to follow for backup. I have a dedicated drive for backup. I am thinking of a gfs scheme with rsnapshot. Is this a good idea?
[10:57] <bazhang> #ubuntu-server White_Cat
[10:59] <jacobian> Does gchat in firefox randomly reorder capital letters for you when you type them?
[11:00] <White_Cat> bazhang no response there
[11:00] <White_Cat> :p
[11:01] <bongma> im learning my way around the command line but it does not copy a file to the directory. what am i doing wrong??
[11:01] <bongma> bong@bong-desktop:~$ cd Desktop/
[11:01] <bongma> bong@bong-desktop:~/Desktop$ cp newfile foo - This is good as it created a new file foo.
[11:01] <bongma> bong@bong-desktop:~/Desktop$ cp newfile /newdirectory
[11:01] <bongma> cp: cannot create regular file ‘/newdirectory’: Permission denied
[11:01] <bongma> bong@bong-desktop:~/Desktop$ sudo cp newfile /newdirectory
[11:01] <somsip> bongma: users can't usually write to /. Did you mean to create in ~/newdirectory ?
[11:03] <k1l> bongma: does /newdirectory exist? and got your user write permissions there?
[11:06] <bongma> somsip: im the only user and i meant to copy a file to the newdirectory on Desktop.
[11:06] <Squall5668> bongma: you are actually trying to copy a file in 'newdirectory' on / though and not the desktop
[11:07] <Squall5668> try '~/Desktop/newdirectory' instead
[11:07] <k1l> bongma: just use "newdirectory/" without the first /
[11:07] <bongma> k1l: yes it exists. how do i know my permissions?
[11:07] <Squall5668> k1l: that still wouldn't be the desktop, he's in ~
[11:08] <k1l> Squall5668: it is
[11:08] <Squall5668> k1l: you are right, he is. I'm blind...
[11:09] <yuan> checking for xgettext... no
[11:09] <yuan> checking for msgmerge... no
[11:09] <yuan> checking for msgfmt... no
[11:09] <yuan> checking for gmsgfmt... no
[11:09] <yuan> configure: error: GNU gettext tools not found; required for intltool
[11:09] <bongma> Squall5668: how do i get to the Desktop
[11:10] <yuan> checking for xgettext... no
[11:10] <yuan> checking for msgmerge... no
[11:10] <yuan> checking for msgfmt... no
[11:10] <yuan> checking for gmsgfmt... no
[11:10] <yuan> configure: error: GNU gettext tools not found; required for intltool
[11:10] <k1l> yuan: see the readme what requirements that software got
[11:11] <Squall5668> bongma: k1l was right, you did cd Desktop, i just didn't see that. My bad. '/newdirectory' though, still means a newdiretory in the root. try 'newdirectory/' as k1l suggested
[11:11] <Squall5668> or cd to it
[11:15] <bongma> bong@bong-desktop:~/Desktop/newdirectory$ sudo cp newfile newdirectory
[11:15] <bongma> [sudo] password for bong:
[11:15] <bongma> cp: cannot stat ‘newfile’: No such file or directory
[11:15] <bongma> bong@bong-desktop:~/Desktop/newdirectory$ sudo cp newfile newdirectory/
[11:15] <bongma> cp: cannot stat ‘newfile’: No such file or directory
[11:15] <bongma> bong@bong-desktop:~/Desktop/newdirectory$
[11:16] <rnz> hi all
[11:17] <rnz> anybody use gsutils for google drive (not for google cloud storage)?
[11:17] <Squall5668> bongma: For now, stop using sudo as it's not needed. The 'newfile' is in a directory above the one you are in. So either copy it with the full path or '../newfile'. Try reading through guides such as https://help.ubuntu.com/community/UsingTheTerminal
[11:26] <idox_> hey i instaled ubuntu 14.04 on my laptop samsung np300a5e and i cant get my laptop cam to work. how to fix that?
[11:26] <tomodachi> idox_: is it detected by lsusb?
[11:27] <illizian> @idox_ does it show in lsusb?
[11:27] <idox_> i wil send pastebin of lsusb
[11:27] <tomodachi> illizian: first
[11:27] <tomodachi> idox_: doit
[11:27] <illizian> tomodachi: :P
[11:27] <tomodachi> ;)
[11:28] <idox_> http://pastebin.com/pBJZxRt1
[11:29] <bongma> Squall5668: so how would you do it if you were in bong@bong-desktop:~/Desktop$
[11:29] <tomodachi> idox_: doesnt look like there is any webcam there. what about lspci?
[11:29] <k1l> bongma: dont use sudo
[11:30] <idox_> tomodachi, one sec
[11:30] <k1l> bongma: does "ls -al" list your newfile?
[11:31] <idox_> tomodachi, http://pastebin.com/uhvatFy8
[11:32] <bongma> ok thank you all.  cp newfile newdirectory did it.
[11:32] <idox_> tomodachi, is it maybe becouse i installed ubuntu i386 and i have x64 machine, but i didnt have x64 instalation
[11:33] <tomodachi> idox_: no that wouldnt do any differnece really
[11:33] <tomodachi> idox_: seems that the kernel doesnt detect any webcam at least
[11:34] <tomodachi> idox_: so i think that its basically not supported by  the kernel :(
[11:34] <idox_> tomodachi, then only solution will be to instal win in vbox and use it when i need it
[11:34] <idox_> :/
[11:34] <tomodachi> idox_:  you could try instaling a more bleeding edge kernel and booting it, checking if there is support for it there
[11:34] <tomodachi> ill give you a link to a site,
[11:34] <idox_> ok
[11:34] <tomodachi> its quite harmless as you can uninstall the deb, or just boot the old kernel
[11:35] <Squall5668> idox_: if your cam is not detected by anything anywhere, I doubt it will be passed through to a vm
[11:35] <tomodachi> idox_:  what ubuntu release do you use currently?
[11:35] <idox_> 14.04.1 lts
[11:36] <tomodachi> Squall5668: idox_  if the virtualization tech has pci pass through its possible, but probably just easier getting a external webcam really than trying to get that working
[11:36] <tomodachi> idox_: http://kernel.ubuntu.com/~kernel-ppa/mainline/
[11:36] <Mackan90096> Okay, I managed to get my corrupted hdd to show up using testdisk. What partion type is it? gparted says unallocated..
[11:36] <idox_> but i will go on arch, i just test laptop to se can the hardware is comatibale
[11:37] <idox_> its my new machine so its just test, i dont really like ubuntu it was just fast to install for test
[11:37] <tomodachi> idox_: if you dont care about lts perhaps 14.10 is more up to speed as well with driver support,. you could try it from a usb live boot
[11:37] <tomodachi> idox_: whatever distribution you choose , in your case the real importat factor is really the kernel
[11:37] <tomodachi> that its new enough to possibly contain a driver
[11:38] <idox_> i cant acces bios on this laptop by any way so i cant boot from usb, i have aalot of distros on USB but cant access bios :/
[11:38] <idox_> tomodachi, tnx man, i will check on web for some solutions
[11:39] <tomodachi> idox_: boot from cd then?
[11:40] <tomodachi> good luck!
[11:40] <idox_> yeah i will but first to decide what, and then to buy empty cd :D
[11:40] <idox_> long time i didnt use CDs
[11:40] <idox_> lol
[11:41] <fidel_> idox_: why cant you access bios?
[11:41] <idox_> fidel_, i dont know i see alot of same issues on web about this model having problem whit bios
[11:43] <White_Cat> I have this output
[11:43] <White_Cat> http://pastebin.com/cfN0DRhr
[11:43] <fidel_> idox_: lenovo?
[11:43] <idox_> samsung np300a5e
[11:43] <White_Cat> I dont want to get multiple subgid and subuid definitions
[11:43] <White_Cat> how can I fix this?
[11:44] <Squall5668> idox_: sounds like that's an issue you should be looking at before you choose a distro. Still, try using F8 or your manufacturer's equivalent for selecting a boot device without accessing the bios screen. I'd still look into that if I were you though
[11:47] <psiodrake> hmmm ... cp cannot create regular file: No such file or directory ...
[11:47] <idox_> Squall5668, i am not pro user but i tried that, tried all buttons and nothing
[11:47] <psiodrake> just trying to copy an example config file from where it is to where I want it to be
[11:49] <hateball> psiodrake: Probably a matter of wrong permissions
[11:49] <psiodrake> hateball I even tried with sudo :/
[11:49] <hateball> psiodrake: Are you trying to cp a file to a directory/sub-directory that does not exist?
[11:50] <psiodrake> hateball, I'm trying copy from /Unreal3.2/doc to /Unreal3.2
[11:50] <hateball> psiodrake: I hope that's not the actual path
[11:50] <psiodrake> it kinda is *cringe*
[11:50] <psiodrake> I have no idea what I'm doing
[11:51] <Squall5668> psiodrake: please post your cp command. And I recommend not having the IRCd direcotry there...
[11:51] <hateball> !paste
[11:52] <psiodrake> Squall5668: "sudo cp /Unreal3.2/doc/example.conf /Unreal3/example.conf
[11:52] <tonyyarusso> Yeah.....creating top level directories is a terrible idea.
[11:52] <Squall5668> psiodrake: you forgot '.2' in the destination.
[11:52] <psiodrake> where should I put the IRCd though?
[11:52] <Squall5668> psiodrake: try autocompleting commands with tab. It helps a lot
[11:52] <psiodrake> Squall5668: forgot '.2' ?
[11:53] <Squall5668> psiodrake: yup. re-read the destination of your cp command
[11:53] <rtur> Hi guys, how can I disable update-notifier  ? It is called on every login on my bananpi and takes ages until the login is complete
[11:54] <psiodrake> Squall5668: oh right, that was just a typo... dunno how to copy/paste
[11:54] <tonyyarusso> psiodrake: Custom software should go in /usr/local or /opt
[11:54] <psiodrake> tonyyarusso: since I've already configured and done a make, can I just copy it over?
[11:54] <nima_> hi
[11:54] <psiodrake> well... move it anyway
[11:55] <rtur> ssh login, not gui. And it isn't in my bash.rc/profile where from is it called ?
[11:55] <tonyyarusso> psiodrake: Depends on how they wrote the scripts, but I'd clean, move it, and then configure and make again.
[11:56] <psiodrake> *grumbles* oh well
[11:56] <Squall5668> psiodrake: other than that typo, the command seems fine. To make sure you type everything correctly, try navigating in the doc/ and making sure the file is there
[11:57] <spliffy> hello fellows. how can i see if an upgrade of a package triggers a daemon restart? in my current case mysql-common. Will it restart my server, or can i upgrade it seamlessly?
[11:57] <psiodrake> why can't I tar zxvf the tarball unless I'm in the same folder as it?
[11:58] <psiodrake> "tar zxvf /Downloads/Unreal3.2.9.tar.gz /usr/local" doesn't work
[11:58] <psiodrake> says no such file or directory
[11:58] <k1l> psiodrake: you dont have write permissions there?
[11:58] <spliffy> psiodrake: you are trying to extract /usr/local from the archive
[11:58] <spliffy> but it isn't in the archive
[11:58] <psiodrake> spliffy: I'm trying to extract the tarball to /usr/local
[11:59] <spliffy> psiodrake: but that isn't what this command will do
[11:59] <psiodrake> man tar
[11:59] <psiodrake> dammit wrong tab
[11:59] <spliffy> the pathname at the end refers to a path in the archive
[11:59] <simosx> psiodrake, there is a parameter to indicate where to untar into.
[12:00] <simosx> psiodrake, I think the '-C' (but verify)
[12:00] <psiodrake> -C, --directory DIR change to directory DIR
[12:01] <Squall5668> spliffy: There is usually a 'postinst' file that handles that in a deb. I seriously doubt that mysql-common will do that, but you can check
[12:06] <_zoom_> Hi,
[12:06] <rbxs> Hi
[12:06] <_zoom_> is there any generic scanner driver, my scanner is brother 700d
[12:06] <_zoom_> ?
[12:06] <spliffy> Squall5668: thank you. i think you're right. this packages doesn't have a postinst file, so i guess it wont restart the server.
[12:07] <psiodrake> what's the diff between having Unreal in / and having it in /usr/local?
[12:07] <tomodachi> psiodrake: programs that you have under /usr/local . indicate that they do not come with the distribution but are compiled / installed by you manually
[12:08] <tomodachi> wich is good for separation,  so an update doesnt happen to overwrite a parallell "local" installation you have made yourself
[12:08] <kubblai> hi i have a ubuntu server running trusty - ntpq -nc peers shows a different entry to the ntp.conf is ntpd getting the time from this server or the server in my ntp.conf ?
[12:09] <desperate_joe> hello
[12:09] <psiodrake> tomodachi: so when I sudo apt-get install something where does it put that
[12:09] <Squall5668> spliffy: it's not 'in' the deb package. You should read up on the pack process. And more importantly, set up a test server
[12:10] <desperate_joe> ubuntu 14, dual boot win 7 laptop hp pavilion, my homenetwork in win works ok, in ubuntu ALL internet programs are experiencing a way to slow to be normal conection
[12:11] <tomodachi> desperate_joe: are you connecting over wifi?
[12:11] <desperate_joe> yes
[12:11] <tomodachi> it sounds like a wifi driver issue then
[12:11] <psiodrake> mv example.conf unreal.conf
[12:11] <spliffy> Squall5668: really? how do mean it - not in the deb? i think i remember having seen such file in a deb.
[12:11] <desperate_joe> both in win and ubuntu
[12:11] <psiodrake> ... I did it again? Really?
[12:11] <tomodachi> desperate_joe: but in win the speed is acceptable right?
[12:11] <desperate_joe> yes
[12:12] <desperate_joe> in win the speed is ok comparing to my providerpackage
[12:12] <tomodachi> desperate_joe: sometimes wifi power management can have performance issues in linux
[12:12] <tomodachi> try turning it off for the wifi driver
[12:13] <Mackan90096> man.
[12:13] <tomodachi> desperate_joe: http://askubuntu.com/questions/85214/how-can-i-prevent-iwconfig-power-management-from-being-turned-on
[12:13] <Mackan90096> Guess I won't be getting those files back :(
[12:13] <tomodachi> if this does not help , perhaps its better to try to install a newer driver. But start with this , since its easier
[12:15] <simosx> desperate_joe, another potential issue would be problems with the DNS resolutions when ipv6 is involved. Once you work out the power management of WiFi, do a google search to see if other Ubuntu users have such issues with your Internet provider (or branch of router), or WiFi card.
[12:15] <desperate_joe> still loading the page!
[12:15] <tomodachi> desperate_joe:  sudo iwconfig wlan0 power off
[12:15] <tomodachi> the page describes how to do it permanently
[12:16] <Mackan90096> hm
[12:18] <Mackan90096> ugh
[12:18] <Mackan90096> Fuck it.
[12:18] <Mackan90096> I'll just format the drive
[12:19] <desperate_joe> i get this message: "no talloc stackframe at .../source3/param/loadparm.c:4864, leaking memory
[12:19] <Mackan90096> Without getting my files back :(
[12:19] <White_Cat> what command would tell me where the content is being written
[12:19] <k1l> desperate_joe: running samba?
[12:19] <White_Cat> I attempted to mount a drive to a directory
[12:19] <White_Cat> and I want to verify stuff will be written to the correct drive
[12:20] <k1l> Mackan90096: if the drive is gone its gone, hardware wise. but see the errors when mounting to see what the error is
[12:20] <desperate_joe> i'm an absolute noob... i have no idea what that means
[12:20] <desperate_joe> what is samba?
[12:20] <cfhowlett> !samba | desperate_joe
[12:20] <desperate_joe> i'm kin brazil, but the samba has passed already, it was the last few days only ;)
[12:20] <k1l> desperate_joe: its the network file change thingy from windows
[12:21] <desperate_joe> and what does it? i am running a dual boot... is that what it means?
[12:21] <k1l> !samba | desperate_joe
[12:22] <k1l> see if you are running it. that error indicates its a known error with it
[12:22] <desperate_joe> ??? how do i see if i am running an unknown program?
[12:23] <k1l> ps -ef |grep smb
[12:23] <desperate_joe> @k1l: is that meant for me?
[12:24] <k1l> yes
[12:24] <k1l> since you asked how to see if samba is running
[12:24] <desperate_joe> ok
[12:25] <desperate_joe> ok, but i was not sure, maybe you were helping other people as well.... better safe etc
[12:25] <Mackan90096> anyone?
[12:25] <BluesKaj> Howdy all
[12:26] <k1l> Mackan90096: i see you now again asking without giving informations. no one can help you that way
[12:26] <desperate_joe> if iam running samba, what does it have to tell?  root 606 1 0 08:56 ? 00:00:00: smbd -F
[12:26] <Mackan90096> I can't mount this drive. Ubuntu only throws Read Errors at me. How do I fix it?
[12:26] <k1l> desperate_joe: that means samba is running
[12:26] <k1l> desperate_joe: sudo apt-get remove libpam-smbpass
[12:26] <k1l> that should remove that error
[12:27] <Mackan90096> I'll do anything to get some files back from it.
[12:27] <White_Cat> EriC^^ around?
[12:28] <desperate_joe> ok, it removed libllvm3.4:i386 and some tohers
[12:28] <White_Cat> How can I check what partition a specific directory is bound to?
[12:28] <desperate_joe> by the way: it still is loading the links about samba that you have sent ... giving some timeouts
[12:29] <k1l> Mackan90096: what errors exactly? if there are a lot error it can be some hardware failure and you cant do anything at all
[12:29] <nichlas> White_Cat: by running df
[12:29] <nichlas> it will show you all your mounts
[12:29] <White_Cat> I am confused then
[12:29] <Mackan90096> I have no idea k1l
[12:29] <White_Cat> it is mounted to both?
[12:29] <k1l> !paste | Mackan90096
[12:29] <desperate_joe> @k1l: i have done the ps -ef etc again, but is is giving exactly the same answer asbefore i did the remove thing... i thought i removed it?
[12:30] <Mackan90096> mkay
[12:30] <k1l> Mackan90096: how should one help you if he has to guess all the time what is going on form reading your ramblings?
[12:30] <nichlas> White_Cat: you have a partition mounted twice?
[12:30] <White_Cat> http://pastebin.com/FJHm6MeR
[12:31] <Mackan90096> no idea.
[12:31] <k1l> desperate_joe: no. it just removed the part that was making the error message due to a bug
[12:31] <White_Cat> I want /dev/sdb1 to be mounted as /backup/disk1
[12:31] <k1l> Mackan90096: ok. i give up. if you dont want to give any informations and exact errormessages no one can ever help you. so stop to ask anyway
[12:31] <desperate_joe> so, what to do next? the sudo iwconfig line?
[12:31] <nichlas> White_Cat: it looks like it is already
[12:31] <White_Cat> why do I see dev/sda2 on that pastebin?
[12:32] <Mackan90096> k1l, I'm working on it. chill
[12:32] <White_Cat> or is that the root directory?
[12:32] <nichlas> White_Cat: sha2 is mounted as root
[12:32] <torrente> hi, who can help me?
[12:32] <White_Cat> ah!
[12:32] <nichlas> White_Cat: so, everything else
[12:32] <White_Cat> I see it lists everything
[12:32] <White_Cat> phew
[12:33] <k1l> Mackan90096: you already demotivated me since i asked several times for informations to help you but i just got ramblings. so good luck, maybe others will help if you give actual informations
[12:33] <cfhowlett> !ask | torrente,
[12:34] <White_Cat> nichlas so i am following https://help.ubuntu.com/community/InstallingANewHardDrive#Automatic_Mount_At_Boot
[12:34] <psiodrake> seems I've just got unrealircd working
[12:34] <Mackan90096> k1l, I'm working on getting a image for you.
[12:34] <White_Cat> I added /dev/sdb1    /backup/disk1   ext3    defaults     0        2
[12:34] <psiodrake> now to try install services lol
[12:34] <psiodrake> and then maybe a lamp stack
[12:34] <desperate_joe> @k1l what to do now? use the "sudo iwconfig" line again?
[12:34] <Mackan90096> k1l, http://imgur.com/Utxhwql
[12:35] <White_Cat> do i need to do anything else for auto mount?
[12:35] <nichlas> White_Cat: that sounds right. If you want to test it before you reboot, you can unmount the current one and run "mount -a"
[12:35] <k1l> desperate_joe: i dont know what your other issue is. see what wifi card you got and what driver it uses and if there are known issues
[12:35] <nichlas> White_Cat: better to get the error now than during boot :)
[12:35] <bongma> why does ifconfig tell me a different ip address than the one im on?
[12:36] <desperate_joe> don't understand what you mean: i deleted the thing you said, but my internet is still dragging on, that's the issue... so how to continue from the point that you asked me to delete?
[12:36] <Mackan90096> Gonna format it.
[12:37] <nichlas> bongma: what does it show? which one are you on?
[12:37] <nichlas> bongma: just write part of the address
[12:37] <k1l> desperate_joe: you gave a error "<desperate_joe> i get this message: "no talloc stackframe at .../source3/param/loadparm.c:4864, leaking memory"   that is what i saw and helped you remove that error
[12:38] <desperate_joe> @k1l for your info, the links about samba that you gave me (a while ago) still don't open because of too slow a speed
[12:38] <desperate_joe> @k1l i thought you where helping me with the slow internet thing
[12:38] <k1l> desperate_joe: close the links. we are done with that error already
[12:39] <desperate_joe> but ok, so if you were helping me with one thing, is there anybody who can help me with my deadbeat internetspeed?
[12:40] <k1l> desperate_joe: your slow internet issue could be a wrong /bad wifi driver or a bad netowrk setting (from your isp). but i am not too much into networking. maybe others will help if you explain again what exactly you use, got hardwarewise and what the errors are
[12:40] <bongma> nichlas: i mean its different what whatsmyip.org shows.
[12:43] <desperate_joe> i did "sudo iwconfig wlan0 power off", but there is no improvement in my connection: browser is still slow like ..
[12:43] <nichlas> bongma: sure, whatismyip will show you the external IP, and ifconfig will show you the internal
[12:44] <bongma> nichlas: whats the difference between the two??
[12:44] <torrente> hi
[12:44] <torrente> who can help me?
[12:45] <nichlas> bonma: you can have many internal IPs on your network, but your ISP will only give you one external IP to share.
[12:45] <illizian> with what @torrente ?
[12:45] <torrente> in the last cd of ubuntu
[12:45] <torrente> does have Transmission embedded?
[12:45] <torrente> or i have to download ?
[12:46] <nichlas> bongma: if you need to serve traffic from your computer to the internet, you will have to look into "port forwarding" in your router.
[12:46] <illizian> @torrente I believe transmission is installe
[12:46] <torrente> thans
[12:46] <torrente> thanks
[12:47] <ROKO__> hey anybody here?
[12:47] <bongma> nch
[12:48] <bongma> nichlas: ok. thanks
[12:51] <desperate_joe> please, anybody shed some light on my slow internet pls?
[12:51] <wam> Hi, what do I have to do to get the kernel config option CONFIG_AUFS_SHWH enabled in the coming ubuntu kernels? Is there an issue tracker for ubuntu kernels=
[12:53] <bongma> desperate_joe: call ur isp. they might be able to help u with that.
[12:54] <desperate_joe> isp?
[12:54] <bongma> ur internet service provider.
[12:55] <desperate_joe> internet service provider? if you meant that, it is not my homenetwork that is the problem: the same network gives ok speed in win7 on this dualboot
[12:55] <desperate_joe> and even so, they do not provide help with ubuntu
[12:56] <leo123> Hi, I would like to take a screenshot of another computer and user. The user is using the Gnome and I am connected with ssh in his machine. Is it possible?
[12:57] <White_Cat> nichlas it is telling me that it is in use
[12:59] <bongma> desperate_joe:  aaaaahh ok there are guys who are into network stuff here. maybe can they can help. guys, where are you?
[12:59] <Ben64> leo123: "DISPLAY=:0 gnome-screenshot" ....maybe
[13:00] <BTDhero> hi, anybody here?
[13:00] <BTDhero> I  would gladly accept some help regarding my pariions
[13:01] <BTDhero> I  would gladly accept some help regarding my partitions*
[13:01] <leo123> Ben64, thx, could you explain more details about it?
[13:01] <Ben64> leo123: gnome-screenshot is a program that takes screenshots, usually runs when you hit "print screen"
[13:02] <leo123> Ben64, ok, but how can I use the gnome-screenshot logged in a ssh session?
[13:03] <Ben64> leo123: i already told you
[13:03] <hateball> !ask | BTDhero
[13:05] <BTDhero> when  I installed ubuntu on my PC, a long time ago, i set one 100GB partition as swap space. can I format and use it as ntfs now ?
[13:06] <hateball> BTDhero: Sure
[13:06] <leo123> Ben64, I got this messagem trying that "(gnome-screenshot:13303): WARNING **: Unable to use GNOME Shell's builtin screenshot interface, resorting to fallback X11. Error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files"
[13:06] <hateball> !gparted | BTDhero
[13:06] <shr3k> Hey guys, sorry bit of a newbie unfortunately, I know my way around linux but stuck at the moment, I have a dedicated server with 2 x 3000tb drives and wan't to assign as much ass possible to home directory to store backups and media, eventually have plex, can't seam to find commands on line!  Any pointers appreciated
[13:06] <hateball> BTDhero: Be sure that you know what you're doing when messing about with partitions tho
[13:07] <Ben64> leo123: are you logged in as the user you want to screenshot
[13:08] <leo123> Ben64, yes
[13:08] <Ben64> then i'm not sure why it's not working
[13:08] <BTDhero> hateball: I installed gparted and identified the right partition to modify. Is it ok to right click on it and select 'swapoff' option?
[13:08] <Ben64> BTDhero: how much ram do you have
[13:08] <leo123> Ben64, sorry, not, I am logged as root, and I want to get a screenshot from another user
[13:09] <hateball> BTDhero: It should be for resizing purposes. But you most likely have it in your /etc/fstab, so you need to adjust that accordingly to any changes you make
[13:10] <Ben64> leo123: then you can probably ignore that and it still works
[13:10] <BTDhero> Ben64: 2GB DDR2
[13:10] <hateball> BTDhero: That is, if you format to something else, your computer will still try to swapon a partition that is no longer there. That's not so good.
[13:10] <Ben64> BTDhero: i'd really recommend not taking swap away then, that is pretty low
[13:10] <hateball> I agree with this ^
[13:11] <hateball> If you afforded 100GB previously you can most likely afford 2-4GB now
[13:11] <BTDhero> this HDD is partitioned: 30 GB for Ubuntu, 100GB for important data and 100 GB for swap. Should I use my other HDD instead? 500 GB
[13:12] <Ben64> 100GB for swap is quite excessive, 4GB would be good, like hateball said
[13:13] <BTDhero> so  if i simply resize mi  swap space for 4 GB and use the rest as NTFS would be ok ?
[13:13] <Ben64> yeah, but not sure if you can resize swap, you can definitely delete it and create a new one though
[13:13] <BTDhero> using gparted?
[13:13] <Ben64> yep
[13:14] <hateball> You can resize a partition as long as it's not swapon'd
[13:14] <hateball> Once you swapon /dev/whatever it'll just use whatever size it can
[13:14] <jessemuffin> Good morning! Quick Question, when my Ubuntu 14.04 LTS is idling (with nothing open but htop) it is using 1300 mb of ram. Is this normal? If I log out then log back in it goes down to about 500 to 600 mb of ram. At the moment it has 8 instances of Compiz running in htop.
[13:15] <Ben64> jessemuffin: pastebin the output of "free -m"
[13:16] <jessemuffin>              total       used       free     shared    buffers     cached
[13:16] <jessemuffin> Mem:          7686       4580       3106         46        244       3092
[13:16] <jessemuffin> -/+ buffers/cache:       1243       6443
[13:16] <jessemuffin> Swap:         3298          0       3298
[13:16] <jadesoturi> hi guys..
[13:16] <exhuma> Hi, I think I have borked my NetworkManager (Kubuntu 12.04). When I try to restart it, it says: "Unknown job: network-manager". I've tried a dpkg-reconfigure, and even an "aptitude reinstall". No luck. Any ideas?
[13:16] <hxm> hello, i want to create a netboot USB installer of a ubuntu server for ARMv7 - i am in this page http://www.ubuntu.com/download/server/arm and i see a vmlinuz file and initrd.gz files, i am on mac, can i still do that?
[13:17] <jadesoturi> i created a new LVM pv and vg, but when trying to mount it to /mnt/var (as i am moving my /var to the new lvm) i cant mount the newly created lvm..
[13:17] <Ben64> jessemuffin: doesn't seem too bad really, compiz isn't known for being lightweight
[13:17] <jessemuffin> But the problem resolves if I log out and log in?
[13:17] <Marvin> nick MarvinMicek
[13:17] <jadesoturi> gives unknown ilesystem type 'LVM2_member'
[13:17] <Ben64> jessemuffin: is it really a "problem"
[13:17] <exhuma> jadesoturi: You are talking about only a PV and VG. You also need to create a LV!
[13:18] <jadesoturi> exhuma, that to is created.
[13:18] <exhuma> jadesoturi: -> lvcreate
[13:18] <jessemuffin> Not really, I'm just being picky, I was just making sure there wasn't an underlying issue.
[13:18] <exhuma> jadesoturi: does it show up in /dev/mapper/<vgname> ?
[13:18] <jadesoturi> hang on. but i think so..
[13:19] <jadesoturi> yes
[13:19] <jadesoturi> its there.
[13:19] <jadesoturi> i also formated it with ext4
[13:19] <exhuma> jadesoturi: have you formatted it? mkfs
[13:19] <exhuma> ?
[13:19] <exhuma> jadesoturi: ah...
[13:19] <jessemuffin> Thanks ben64! :)
[13:20] <jadesoturi> exhuma,  when trying to mount it with : mount -t ext4 /dev/sdb1 /mnt/var i get : Allready mounted or /mnt/var busy..
[13:20] <jadesoturi> but neither /etc/mtab nor blkid shows anything mounted there.
[13:20] <exhuma> jadesoturi: to me, the error message hints at something with your FS (the formatting step). But I'm not 100% sure
[13:21] <jadesoturi> hm ok i can reformat it again if you thing it willhelp?
[13:21] <tomodachi> exhuma:  jadesoturi  dont think so
[13:21] <tomodachi> it seems to be mounted already so its warning that its being in use
[13:21] <tomodachi> type mount
[13:22] <tomodachi> our even mount |grep /dev/sdb1
[13:22] <hateball> I'm not sure how /dev/sdb1 would be mountable if you've created a LV
[13:22] <tomodachi> to see if it actually is mounted
[13:22] <hateball> It... would be in /dev/mapper as someone already said
[13:22] <jadesoturi> blkid -c /dev/null -o list shows that dev/sdb1 is (in use) while /dev/mapper/vgvar-var (not mounted)
[13:22] <tomodachi> there wouldnt be a sdb1 if it was a pv at all I guess?
[13:23] <jadesoturi> ok. so should try to: mount /dev/mapper/vgvar-var /mnt/var instead?
[13:23] <exhuma> jadesoturi: a simple call to "mount" shows everything which is currently mounted. If it is indeed mounted, the LV-name should show up in there.
[13:24] <jadesoturi> exhuma,  its not there..
[13:24] <jadesoturi> mount /dev/mapper/vgvar-var /mnt/var worked..
[13:24] <hateball> tomodachi: You would still have /dev/sdX, but fdisk -l should show it as LVM and not ext4 or some such
[13:24] <jadesoturi> now to move all the stuff :)
[13:24] <exhuma> jadesoturi: as a sidenote: "mount /dev/vgvar/var" should be identical to "mount /dev/mapper/vgvar-var". They are symlinked IIRC.
[13:25] <jadesoturi> exhuma, ok thx:)
[13:25] <hvoid> jadesoturi: hello, what kind of device are you mounting
[13:25] <hvoid> ?
[13:25] <exhuma> jadesoturi: out of curiosity, what was the exact command that you used which failed?
[13:26] <jadesoturi> mount /dev/sdb1 /mnt/var - following a guide on the net for setting up LVM
[13:26] <b-p> hi, help me pls. how can i set to not log 'sql plugin' lines to auth.log: http://pastebin.com/KiktwCJ6
[13:27] <jadesoturi> hvoid, its a esxi virtualdrive for the virtual server im working on rightnow.
[13:27] <exhuma> jadesoturi: well, that command is incorrect ;) With that command, you are accessing the raw device, which is a member of a physical group. There's no partition table on there.
[13:28] <jadesoturi> exhuma, yeah.understood that... the guide was wrong.. thanks for thehelp guys!
[13:28] <exhuma> jadesoturi: you should also be able to use "/dev/vgvar/var" instead of "/dev/mapper/vgvar-var". But that's only a cosmetic thing.
[13:28] <exhuma> jadesoturi: glad to be of service ;)
[13:30] <jadesoturi> ok. ill stick with the mapper, since that is whats usedin the fstab :)
[13:31] <jadesoturi> the normal user run level is 5, right?
[13:34] <exhuma> jadesoturi: I actually don't remember... :) It's been too long since I messed around with runlevels.
[13:34] <Ben64> jadesoturi: runlevels don't really do anything anymore, except for 0,1, and 6
[13:34] <exhuma> http://en.wikipedia.org/wiki/Runlevel
[13:35] <jadesoturi> hehe ok.i change to init1 to make sure there was no writing etc to the var while moving it..
[13:41] <NEI4U2K> hi, i was looking to change splash screen. and installed plymouth manager deb through software center. but it somehow doesn't work. so i tried to uninstall using software center. but it only has reinstall option. so i opened terminal and typed sudo apt-get remove plymouth. but it seems that it's gonna remove quite a lot of stuff. So, I want to know if plymouth is some kind of essential software in ubuntu.
[13:41] <iamganesh> Which wireless receiver do you use in Ubuntu that works very well for you without having to go through those tweaks and edit config hassles to set it for optimum performance? Thought I'd get one that works already well. Thanks!
[13:42] <BTDhero> if I decide to reinstall linux in order to rearrange my partitions, how much space should I set on the ubuntu partition? currently it's 30GB and it has only 5 GB free
[13:42] <oslo2015> Anyone know why Eclipse only is version 3.8 in the Lubuntu Software Center?
[13:42] <hateball> iamganesh: I have Intel 6325 and Intel 7260
[13:43] <hateball> iamganesh: and the Broadcom BCM43228 I have in this laptop is OK too. As long as it's not Realtek I tend to be happy.
[13:43] <iamganesh> hateball: are they on your laptop already or external?
[13:43] <hateball> iamganesh: the 7260 is in a desktop I have, the others in laptops
[13:43] <b-p> help me pls. how can i set to not log 'sql plugin' lines to auth.log: http://pastebin.com/KiktwCJ6
[13:43] <captaineBomberma> anyone who uses kali ?
[13:44] <iamganesh> hateball: thanks, and yes,  Realtek seems to have bad relationship with Ubuntu.
[13:45] <hateball> iamganesh: Some of them you can get working, I just don't find it worth the trouble and anger when Intel chipsets arent that expensive
[13:48] <BTDhero> if I decide to reinstall linux in order to rearrange my partitions, how much space should I set on the ubuntu partition? currently it's 30GB and it has only 5 GB free left
[13:49] <shr3k> Hey guys, having irc issues so not sure if post came through. I have added a new 3tb drive to my ubuntu server, and wandering if I can extend my current home partition to include this space despite it being a seperate physical drive
[13:53] <farid> allo
[13:54] <OerHeks> BTDhero, as much as you can use
[13:54] <shako> bonjour
[13:54] <tomodachi> avahi
[13:54] <hateball> shr3k: No. You could backup your data and pool new/old disks together using LVM tho, and restore data to that
[13:55] <shr3k> Ok so adding a new drive it would be best to create a new partition and then use that for say Media and the original for the backups or vice versa, so split the data?
[13:57] <BTDhero> OerHeks: well, i can use at most 250 GB, but I would like to keep my data on a separate partition in NTFS in order to be accesible for my other OS. how much would be just fine?
[13:57] <OerHeks> BTDhero, really, that is up to you.
[13:58] <OerHeks> If i said 100 gb, and you run out of space, i feel bad.
[13:59] <BTDhero> Is it enough for now to use a 30GB partition for ubuntu only ?
[13:59] <iamganesh> If I have a dual boot Ubuntu and Windows PC, and I delete the Ubuntu partition completely from Windows Disk Management, then at the next restart the boot screen shows "grub rescue >>>  " and I'm not able to log into Windows either. I know buying Windows  again and booting would work, but any solution?
[14:01] <OerHeks> BTDhero, so if you choose 30 again, and reinstall all, you would have 5 left again...
[14:01] <NegativeFlare> wow
[14:03] <iamganesh> narindergupta: asalaam waleikum bhaijaan.
[14:05] <icebolt> Hi!
[14:06] <icebolt> Can I ask sombody for help?
[14:06] <OerHeks> !ask
[14:06] <iamganesh> !patience
[14:07] <icebolt> I have problem with squirrelmail and courier-imap server (on Debian) (I know it's not Ubuntu, but maybe the server is well known)
[14:07] <icebolt> My problem is
[14:07] <OerHeks> join #debian then for support?3
[14:08] <icebolt> Don'tyou know courier-imap?
[14:08] <icebolt> somebody?
[14:08] <White_Cat> hmm I am strugling with the configuration of rsnapshot
[14:09] <White_Cat> I want to backup everything except a specific directory
[14:09] <White_Cat> and I want to backup to that directory
[14:10] <OerHeks> icebolt, ubuntu = !debian, we handle user/root account differently. unless you want us to wreck your system with wrong answers, join Debian please.
[14:10] <icebolt> ok
[14:10] <icebolt> I will go Debian
[14:11] <neure> hi
[14:12] <neure> i installed ubuntu 14.10, how do i change font size of Qt programs?
[14:12] <iamganesh> !ask
[14:13] <neure> for who was that at?
[14:13] <neure> i already asked my question
[14:13] <KC9YDN> OerHeks: how does ubuntu handle user and root accounts differently?
[14:14] <OerHeks> KC9YDN, we have no root account, first account created during install has root priv.
[14:14] <OerHeks> !root
[14:15] <OerHeks> White_Cat, i was just reading this, include list and exclude list > http://how-to.linuxcareer.com/guide-to-rsnapshot-and-incremental-backups-on-linux
[14:17] <KC9YDN> OerHeks: that's not really an issue being that you can sudo -i
[14:17] <KC9YDN> and `passwd`
[14:18] <adac> Guys, I cannot choose a printer with acroread
[14:18] <adac> any ideas?
[14:33] <smokejohn> hello guys. I want to discuss if it is possible to install ubuntu directly from the hdd
[14:34] <smokejohn> The hdd is unformated. I want to find out if I can load the installer on the hdd and make a laptop I got boot from that hdd and then continue on an installation
[14:35] <smokejohn> All this is done because the cd reader of the laptop is dead. So is my spare external cd reader. And on top of all this the laptop does not support usb booting
[14:35] <psiodrake> ugh my client wants me to stay with my contractor rather than let the contractor bow out of the project
[14:35] <patteh> i'm trying to run a program with a libconfig++9 dependency, but apt-cache search only shows libconfig++8 as available
[14:35] <psiodrake> the contractor is ~6months behind deadline so I really don't get it
[14:35] <patteh> is there any official repo with v9?
[14:36] <dsg_> hey, guys. I have a Compaq Presario CQ61 running Ubuntu 14.04. My fan will NOT shut up, and my processor cores are only running at about 20% each. please help
[14:37] <patteh> dsg_ did the fans always make noise?
[14:37] <patteh> or only since ubuntu install
[14:37] <dsg_> @patteh no, only since Ubuntu
[14:37] <psiodrake> dsg_: what are the odds I'd have the exact same laptop sitting next to me on my desk haha
[14:37] <hateball> dsg_: Does it have an nvidia gpu?
[14:37] <dsg_> @psiodrake I'm in luck, maybe!
[14:38] <dsg_> @hateball it has an AMD GPU
[14:38] <hateball> I don't know anything about AMD, but a guess would be that it's the same as nvidia and requires a restricted driver to do fancontrol properly
[14:38] <hateball> !ati
[14:40] <psiodrake> dsg_: I wouldn't count on me for help... I know nothing about linux
[14:42] <dsg_> hateball: my GPU is a Radeon HD 4225, the list of supported GPUs lists the 4200
[14:42] <dsg_> is that the 4200 series, or just the 4200 GPU itself?
[14:42] <iLabs> Hello everybody
[14:43] <hateball> dsg_: Like I said, I know nothing about AMD. Have a in the extra drivers installer, if you can enable the fglrx driver
[14:43] <hateball> a look*
[14:43] <OerHeks> !lmsensors
[14:45] <dsg_> hateball: there are no proprietary drivers that show up available for me to install. what is the fglrx driver, and how do I go about installing it?
[14:46] <dudebro> hey guys
[14:46] <dudebro> im trying to add a custom startup script to my xfce session but can't get it to run
[14:46] <el3> Hi guys, I have a problem. I deleted my /boot directory, and cannot boot. I tried copy the boot directory over from another ubuntu machine, but that didnt work. I got into the menu where I choose ubuntu or windows, but it boots to windows when I choose ubuntu
[14:46] <dudebro> i can run the script fine from the terminal and it works
[14:47] <dudebro> but when i add it to the session manager nothing happens
[14:47] <OerHeks> dsg_, see !ati > that ati 4xxx is not supported by the prop drivers anymore :-(
[14:48] <fffax> If UID matches, PROC is a direct child and ptrace_scope = 1 (https://www.kernel.org/doc/Documentation/security/Yama.txt), what could be the reason for "Operation not permitted", when I try to attach to PROC?
[14:48] <dsg_> 0erHeks: so should I install the last available driver (released in January 2013)?
[14:48] <dudebro> is there a better way to add a startup script in xfce?
[14:48] <OerHeks> dsg_, same answer, it will not support those old 2xxx 3xxx 4xxx cards AFAIK
[14:49] <OerHeks> not with current xorg
[14:49] <dsg_> 0erHeks: Crap. how can I be sure that the problem is the GPU? or could that be the only culprit? CPU temp is at 94C
[14:49] <hateball> dsg_: I'm not saying it *is* the GPU fan, but if the CPU isnt working too hard that shouldnt be the culprit
[14:50] <trijntje> el3: yeah, that wont work, I'd suggest just installing again, after you make a backup of all important data
[14:50] <hateball> if you have the means you could open it up and have a look
[14:50] <dsg_> hateball: what would I be looking for? dust?
[14:50] <dudebro> would it help if i posted the contents of the script?
[14:51] <hateball> dsg_: Well, that's one thing. I was more thinking carefully stopping the fan using your finger or such, see if the noise goes away
[14:51] <iLabs> How I can add indicator sensors-applet to indicator's panel on Ubuntu Unity?
[14:51] <hateball> dsg_: CPU temp at 94C seems rather high
[14:53] <Guest93308> блядь
[14:53] <dsg_> hateball: when I type sensors in the terminal, I get --  http://pastebin.com/C4nHrKVx
[14:54] <iLabs> Guest93308: Хахах. Что случилось?
[14:54] <hateball> dsg_: Sure, could just as well be your GPUs core temp unless you're certain it reads the correct sensor
[14:54] <Guest93308> не туда запостил)))
[14:54] <hateball> dsg_: In most modern BIOS you can see CPU temps, so a quick reboot and look there should show also
[14:54] <iLabs> hateball: How I can add indicator sensors-applet to indicator's panel on Ubuntu Unity?
[14:54] <hateball> iLabs: No idea
[14:55] <iLabs> Guest93308: ))
[14:55] <el3> trijntje: I found this. If I got a live usb I can do sudo grub-install /dev/sda
[14:55] <el3> ?
[14:55] <dsg_> hateball: I'll go look. brb
[14:55] <dsg_> also, thanks
[14:55] <iLabs> iLabs: You know change timeout on grub?
[15:01] <MusicJunkieK1> hateball: I'm back. couldn't find anything in BIOS
[15:01] <trijntje> el3: that depends on how you 'deleted' your boot partition, but you can always give it a try after you make a backup of all important data
[15:01] <MusicJunkieK1> (it's dsg_, by the way)
[15:01] <trijntje> el3: I just think it would be faster to reinstall
[15:02] <Sumitabha> I'm running Xubuntu 14.04 and my PC keeps freezing
[15:02] <Sumitabha> It's loading everything really slow
[15:02] <Sumitabha> It's so bad, I had to boot up a live CD
[15:03] <Sumitabha> I thought there was a way to use the live CD to run a diagnostic test
[15:05] <Pinkamena_D> Is there any way to get $(id -u) to reflect the specified user when using sudo -u <other_user> ?
[15:06] <Pinkamena_D> for example, sudo -u echo $(id -u) will always be 1000 for me
[15:06] <backbox> hi
[15:12] <Sumitabha> could you help me?
[15:12] <fidel_> !ask | Sumitabha
[15:13] <mjohnson15> good morning, has anybody upgraded the base-files package? linux-mint says it's high-risk so i'm hesitant to pull the trigger
[15:13] <Sumitabha> Can I use my Xubuntu live Cd to run a diagnostic test?
[15:15] <OerHeks> mjohnson15, sure, but we don't support mint, they have their own issues.
[15:15] <OerHeks> !mint
[15:16] <Guest93308> минт говно убунту рулит))))
[15:17] <somsip> !ru | Guest93308
[15:17] <mjohnson15> thank you
[15:17] <Chanito> Hey, i am looking for advice regarding installation of Gnome 3.14 on Ubuntu-Gnome 14.10.. Is it stable and working? And how can i install it without adding testing ppa's.. Thanks
[15:18] <Guest93308> thanks
[15:18] <lucas__> I need help to disable Xorg Xserver driver, in order to install the nvidia, when I install the nvidia it gives error to be running this Xorg
[15:18] <OerHeks> Chanito, 3.14 is still in progress, not installable without ppa and not recommended, wait for 15.04 vivid
[15:21] <prashant_123456> hello to all amazing people at ubuntu
[15:22] <Ackis> hmmm - can you integrate shellcheck with nano at all?
[15:22] <simosx> hi prashant_123456!
[15:22] <palo73> hi
[15:23] <Guest93308> hi
[15:23] <White_Cat> EriC^^ back?
[15:25] <Isterico> sera
[15:27] <thehebs> what is ~/.cache/upstart?
[15:27] <thehebs> i somehow ran out of space and i hit examine and its saying that folder is using 49 gigs
[15:28] <thehebs> gnome-session-unity.log is the one that is 48.7 gigs
[15:33] <Chanito> 0erHeks: Thank you
 Thank you
[15:35] <kalletra> Hi, I'm trying to update libssl1.0.0 to something higher than 1.0.1-4ubuntu5.21 ... I'm running ubuntu 12.04 on azure, and we are vulnerable to CVE-2014-0224... It just doesn't work.. it searches through security.ubuntu.com, but it can't find any newer version..
[15:36] <simosx> kalletra, try 'apt-cache policy libssl1.0.0' and 'apt-cache policy libssl0.9.8' to see what's there.
[15:37] <kalletra> I just saw that version 5.14 is what I need, but git 5.21.. it looked like .12 ... :-/
[15:37] <kalletra> will restart all services and do the security scan again...
[15:38] <somsip> !info libssl precise
[15:38] <Pici> kalletra: You may want to look at the changelogs that we are shipping, 5.21 is patched against that CVE https://launchpad.net/ubuntu/precise/+source/openssl/+changelog
[15:38] <simosx> !info libssl0.9.8 precise
[15:38] <kalletra> yes, I need to use "libssl1.0.0" instead of 0.9.8
[15:38] <simosx> !info libssl1.0.0 precise
[15:39] <Fire^fox> hi i have problem with optimus nvidia card
[15:39] <Fire^fox> ubuntu 14.10 asus x53s nvidia driver 3.43
[15:39] <simosx> kalletra, type those commands I put earlier and post the output on pastebin.ubuntu.com. Finally, give the URL here. It helps to know what's installed.
[15:40] <Fire^fox> in the last update seems the screen is not working
[15:47] <kalletra> simosx: http://pastebin.com/FX5D1MHW
[15:48] <simosx> !info libssl1.0.0 precise
[15:49] <kalletra> ok, then it should be fine...
[15:49] <simosx> kalletra, according to ubotu, you got the latest version. Did you try a test program that shows you are vulnerable to CVE-2014-0224?
[15:49] <kalletra> simosx: but qualys.com says that it is still vulnerable..
[15:51] <simosx> kalletra, Qualys is reading the SSL lib version, which while it's 1.0.1, is patched.
[15:51] <kalletra> simosx: ok, so it's impossible to pass their test if I'm running 1.0.1...
[15:53] <whatisclub> hello
[15:54] <whatisclub> which distribution of linux os have you found best fit to crack WPA-2 networks?
[15:54] <simosx> kalletra, I am not sure how they check. For that bug, I think it's invasive to actually try it out so to be 100% sure.
[15:55] <simosx> whatisclub, it does not depend much on the distribution but on the app to use.
[15:56] <whatisclub> what club music is recommended,house/techno, when installing ubuntus newest distribution and going back to linux....wiping new hd, jamming out to club?
[15:57] <k1l> whatisclub: go and troll somewhere else please.
[15:57] <whatisclub> how is that trolling you lb?
[15:58] <Agent_09> BOOM heheh
[16:01]  * simosx wonders why the troll did not engage to my WPA answer...
[16:03] <Agent_09> about to insall ubuntu on asus UX31E zenbook - looks like everything is going to work out well on it - anyone have any issues with it?
[16:03] <roshanavand> Hi, what's the best way to calculate a route? for example I want to summarize the route for networks 172.16.1.0/24, 172.16.3.0/24, and 172.16.15.0/24
[16:08] <mazzy> I have an host and it has two NICs. the first one in the network 10.0.2.x/24 the second one in the 192.168.33.x/24
[16:08] <mazzy> when I try to configure the second after having configured the first one I got an error because I'm try to assign a gateway
[16:09] <mazzy> I don't understand why I get this error. I mean they are two different NICs
[16:09] <alen> hi ,i need a bash script which can disable net connection in first and enable net connection on 02:00 and next run two commands.how to write it?
[16:09] <mazzy> and they work in two separate networks
[16:09] <raub> How can i get the key out of a .p12 file? openssl pkcs12 -in pickles.p12 -nocerts -out the.key does not seem to work
[16:10] <jfmcarreira> hey guys
[16:10] <jfmcarreira> can anyone point me out for the best way to automate package builds
[16:13] <AegNuddel> I was trying to install the alternate madwifi drivers as my wireless kept disconnecting, but I need to get them back.  How do I remove something from the blacklist?
[16:17] <AegNuddel> I tried gksudo /etc/modprobe.d/blacklist.conf but nothing showed up\
[16:18] <k1l> AegNuddel: because you didnt run a program. you just gave sudo rights to a filepath
[16:19] <KlausedSource> AegNuddel, you should try using a texteditor (as in "sudo nano /etc/modprobe.d/blacklist.conf") and edit the corresponding lines
[16:19] <jfmcarreira> heyy guys
[16:19] <jfmcarreira> which is the alternative to bzr to build packages
[16:23] <somsip> jfmcarreira: bzr is a version control system. What are you trying to achieve?
[16:24] <jfmcarreira> somsip:  http://packaging.ubuntu.com/html/packaging-new-software.html
[16:24] <somsip> jfmcarreira: that's a link. It doesn't tell me what you are trying to achieve
[16:24] <jfmcarreira> somsip: i am trying to create a source pkg
[16:24] <somsip> jfmcarreira: ok - so what are you stuck on?
[16:24] <jfmcarreira> somsip: just saying that i followed that tutorial
[16:25] <jfmcarreira> somsip: i dont want to do it based on that page since it is based on bzr
[16:25] <somsip> !packaging | jfmcarreira (this may be the same url or a different one)
[16:27] <jfmcarreira> somsip: i will look through those links thanks. the first one will end up pointing to the bzr tutorial that i dont want
[16:27] <somsip> jfmcarreira: I understood that launchpad uses bzr, but I may be wrong. If that's the tool it uses, then so must you
[16:27] <somsip> jfmcarreira: it does - http://packaging.ubuntu.com/html/udd-intro.html 3.3 Bazaar
[16:28] <somsip> jfmcarreira: though there are references to the Traditional Packaging, so maybe that is still an option. See what you can find on those links
[16:28] <jfmcarreira> somsip: i must use bzr to upload packages into lauchpad?
[16:29] <bweir> Can anyone help me with a networking problem I have in Ubuntu 14.04? Basically I cannot complete a failed software update as name resolution no longer works, so cannot hand drive apt-get or any of its derivatives.
[16:29] <somsip> jfmcarreira: I'd only be reading the text on that page. Better for you to find it or get advice from someone who has experience in packaging
[16:30] <somsip> jfmcarreira: my last words on this one - http://packaging.ubuntu.com/html/traditional-packaging.html
[16:30] <AegNuddel> been trying to configure my wi-fi
[16:31] <AegNuddel> I know this
[16:31] <AegNuddel> http://paste.ubuntu.com/10310249/\
[16:31] <AegNuddel> oops
[16:31] <AegNuddel> http://paste.ubuntu.com/10310249/
[16:33] <AegNuddel> I need to know what I need to change or update
[16:33] <jfmcarreira> somsip: i am going throught those links.. trying to find what suits me better. i am trying to make it automatically
[16:34] <umbra> lkjahg
[16:34] <aLeSD> hi ... is it possible to set distcc as the default compiler ?
[16:34] <AegNuddel> also this http://paste.ubuntu.com/10301537/
[16:43] <avrdude> if i upgrade my ubuntu version, will i lose all my programs and drivers and stuff?
[16:43] <avrdude> i currently have 12.04
[16:45] <k1l> avrdude: no. but backups are suggested if something goes really wrong
[16:45] <AegNuddel> +
[16:46] <AegNuddel> I'm trying to get my wi-fi enabled
[16:46] <avrdude> nah, yolo
[16:46] <Guest29022> helo
[16:46] <AegNuddel> the atheros chipset
[16:47] <ROKO__> somebody about custom kernel configuration in ubuntu\
[16:47] <ROKO__> i just wanna rebuild lowlatency kernel
[16:47] <ROKO__> with some options
[16:47] <ROKO__> but something going wrong
[16:47] <ROKO__> debian/rules editconfigs
[16:48] <ROKO__> and edit lowlatency config skip all other configs and then just failed
[16:50] <serspan> register ayrtonse1
[16:50] <serspan> help quickstart
[16:51] <simosx> hi serspan. If 'ayrtonse1' is your password, you should change it.
[16:51] <simosx> serspan, also '#ubuntu-gr'.
[16:51] <ROKO__> any ideas for my question ? thanks in advance
[16:52] <simosx> ROKO__, low latency or realtime kernel?
[16:54] <ROKO__> lowlatency kerne
[16:54] <ROKO__> kernel*
[16:56] <ROKO__> https://dpaste.de/gPZK
[16:56] <ROKO__> log
[17:00] <AegNuddel> the atheros chipset/.
[17:00] <AegNuddel> sorry
[17:00] <AegNuddel> my dog typed
[17:01] <el3> trijntje: yes the reinstall is probably faster.
[17:03] <AegNuddel> would the fact that I ended up installing a 32-bit OS on a 64-bit system make my wireless not work?
[17:08] <mazzy> I'm trying to make packet forwarding
[17:08] <mazzy> I have added to iptables the following rule
[17:08] <mazzy> iptables -A FORWARD -i deth1 -o deth0 -j ACCEPT
[17:08] <mazzy> where deth1 and deth0 are my NICs
[17:09] <mazzy> but it doesn't work
[17:09] <mazzy> I should add something more?
[17:12] <mun> hi
[17:13] <lotuspsychje> !iptables | mazzy
[17:14] <mazzy> I have read that doc
[17:14] <amirite> how is pam integrated into ubuntu by default? it is, right? sorry if that's a stupid question
[17:14] <mazzy> I'm working from terminal then no GUI
[17:14] <mazzy> what I would know if that rule could be enough or I should add something more
[17:16] <lotuspsychje> !pam | amirite
[17:19] <Pici> thats not really that helpful...
[17:22] <nikre> anyone familiar with this hadoop problem? http://pastebin.com/6kfWgALH
[17:22] <lotuspsychje> Pici: it explains what it is, and if more info is needed someone should update the trigger
[17:23] <Pici> nikre: Have you asked #hadoop?
[17:23] <nikre> yes asked there too
[17:23] <vamshi> how can i play windows games on ubuntu...???
[17:24] <lotuspsychje> !info playonlinux | vamshi
[17:24] <nikre> vamshi steam is porting games to linux too
[17:24] <vamshi> but i am getting an error while i am installing it
[17:24] <k1l> vamshi: see wine or playonlinux. but best is to see if the gmae got a native linux client :)
[17:25] <vamshi> okay
[17:25] <dbear> I'm trying to find a good source if information related to the nautilus file manager. I want to manage the list of 'server connections' that accumulate over time. I think the Files 3.x app that comes with ubuntu is based on the nautilus code -- but I hate called a program 'files' because its too generic an identifier. It makes googling for something impossible.
[17:25] <vamshi> thanks for the reply
[17:27] <SchrodingersScat> dbear: not sure what this 'Files' is that you talk about
[17:27] <keevitaja> anyone knows the name of the icon in the sidebar which opens the laucher?
[17:28] <dbear> SchrodingersScat: its the file manager bundled with ubuntu desktop
[17:28] <lotuspsychje> keevitaja: dash?
[17:28] <dbear> Gnome files -- according to wikipedia
[17:29] <vamshi> package dependencies can't be resolved - what do this error mean...?
[17:30] <keevitaja> nope
[17:30] <keevitaja> unless it is not stored in /usr/share/icons
[17:31] <vamshi>  package dependencies can't be resolved - what do this error mean...?
[17:32] <lotuspsychje> keevitaja: what are you trying to do exactly?
[17:32] <lotuspsychje> vamshi: did you try sudo apt-get update?
[17:32] <keevitaja> figure out where is this icon stored!
[17:32] <vamshi> i am trying to install see wine!
[17:32] <vamshi> then i got that error
[17:33] <lotuspsychje> vamshi: did you sudo apt-get install wine
[17:33] <khildin> vamshi, can you be more specific... the crystal bowl is a bit misty
[17:36] <vamshi> lotuspsychje      yes
[17:37] <omoresec> hi
[17:37] <omoresec> any one here?
[17:37] <TMess_> Hey guys
[17:37] <omoresec> hi
[17:37] <omoresec> how are you
[17:37] <TMess_> I'm good
[17:38] <omoresec> asl?
[17:38] <Juon> Hi guys
[17:38] <TMess_> How about you?
[17:38] <Juon> good?
[17:38] <TMess_> 19 m india
[17:38] <k1l> !ot | omoresec TMess_
[17:38] <Juon> how make to change my password in freenod ?
[17:38] <TMess_> BTW I have a ques
[17:38] <TMess_> !ot?
[17:38] <omoresec> what?
[17:38] <k1l> Juon: #freenode can help you with that
[17:39] <Juon> Ok
[17:39] <Juon> Thank you
[17:39] <Juon> I don't know
[17:39] <TMess_> I am trying to configure out how to configure cntlm
[17:39] <TMess_> and I am unable to do so
[17:40] <lotuspsychje> keevitaja: maybe this can help: https://help.ubuntu.com/community/UnityLaunchersAndDesktopFiles
[17:40] <TMess_> I am trying to configure out how to configure cntlm ... Can someone help me?
[17:41] <k1l> !info cntlm
[17:41] <lotuspsychje> TMess_: the man page show anything usefull?
[17:42] <TMess_> I once configured cntlm for windows but I never did for linux
[17:42] <k1l> TMess_: this helps? http://stackoverflow.com/questions/9181637/how-to-fill-proxy-information-in-cntlm-config-file
[17:46] <Sumitabha> elfy told me to come here for help with my xubuntu 14.04 problem
[17:46] <lotuspsychje> Sumitabha: ask your issue here mate
[17:46] <Sumitabha> I posted the problem and the error logs in the #xubuntu channel
[17:47] <OerHeks> we cannot read that, unless we were there when you posted.
[17:48] <Sumitabha> What should I do?  Cross posting is against the CoC rules, I think
[17:49] <OerHeks> Why does someone in Xubuntu send you over here ?
[17:49] <k1l> Sumitabha: if they send you over here from the xubuntu channel because they dont know how to help you, its ok this time.
[17:50] <Sumitabha> elfy is still there
[17:52] <Sumitabha> ok, she has to go
[17:53] <Amadeus> Is there any way to run a .exe with Wine from the terminal?
[17:53] <Sumitabha> I'm runing a live CD, because my Xubuntu OS slowed down so much and is loading really slow
[17:53] <Sumitabha> also the updater crashed
[17:54] <Amadeus>  
[17:54] <lotuspsychje> Sumitabha: did your xubuntu worked good before?
[17:54] <Amadeus>  
[17:54] <Sumitabha> yes
[17:54] <Sumitabha> for a couple years
[17:55] <crank__> hi there, how do i make a .gif file with transparent background in xubuntu?
[17:55] <lotuspsychje> Sumitabha: dis you upgrade to 14.04 recently?
[17:55] <Sumitabha> no
[17:55] <Sumitabha> almost a year ago
[17:55] <lotuspsychje> Sumitabha: when did it start to go wrong, and what errors do you have?
[17:56] <Sumitabha> I'm running a fully updated Xubuntu‭ ‬14.04‭ ‬OS on my HP dx5150‭ ‬SFF desktop PC
[17:56] <Sumitabha>  Everything was working pretty well for the last‭ ‬6‭ ‬months,‭ ‬and I was running Firefox and Google Chrome browsers without any problems.‭  ‬Until Google Chrome recently crashed
[17:57] <lotuspsychje> Sumitabha: maybe its time for  a fresh xubuntu install?
[17:57] <Sumitabha>  I got help uninstalling Google Chrome and then installed Chromium browser recently.‭  ‬Afterwards,‭ ‬Chromium appeared to be working fine
[17:57] <Sumitabha>  But later,‭ ‬I went to the BBC.com news website and it was working until I tried to play a video link.‭  ‬None of the video links were working.
[17:58] <Sumitabha>  So,‭ ‬I realized I probably didn't have any plugins installed.‭  ‬So I went browsing for Silverlight,‭ ‬and tried to install it,‭ ‬but I couldn't seem to install it.‭  ‬Then I read that Silverlight is not supported by Chromium.
[17:58] <lotuspsychje> Sumitabha: can you check if you have xubuntu-restricted-extras installed?
[17:58] <firebird1> how to shedulle cron to call job for every 30 seconds
[17:58] <lotuspsychje> !cron | firebird1
[17:58] <Sumitabha> So,‭ ‬then I installed Adobe Flash.‭  ‬And right after I installed it,‭ ‬my computer really slowed down and almost froze.
[17:58] <Pici> firebird1: You can't cron's higest resolution is 1 minute.
[17:58] <lotuspsychje> Sumitabha: how did you install flash?
[17:59] <OerHeks> Athlon 64 3500+  ATI Radeon Xpress 200 , not really a racemonster, even for Xubuntu. do not expect youtube to work flawlessly
[17:59] <elvisP> im confused, I have username and email in my git config --local and --global but each time I do a git push to my repo it prompts me for my username. I'm on ubuntu linux.
[17:59] <Pici> firebird1: er, add a comma or two in there.  If you need to run it every 30 seconds, consider running a script with a sleep 30 in there.
[17:59] <Sumitabha> So,‭ ‬I checked all my Chromium plugins and realized that Silverlight was installed,‭ ‬and Flash was also installed,‭ ‬and they were both active at the same time.‭  ‬Did that cause the crash‭?  I think something more serious is troubling my OS
[17:59] <yxa> hi is anyone familiar with bitbake?
[18:00] <Amadeus> When I try running a .exe file with Wine, I get "This application must be ran with administrative privileges". What's wrong?
[18:00] <lotuspsychje> Sumitabha: you could examine your syslog and dmesg logs, to see whats happening exactly
[18:00] <OerHeks> yxa, last supported version was in Precise 12.04 https://launchpad.net/ubuntu/+source/bitbake
[18:00] <Amadeus> I am the Administrator though
[18:00] <lotuspsychje> Sumitabha: but i would go for a fresh xubuntu 14.04 install
[18:01] <tharkun> So I am debuging an isue with notion and ubuntu, how can I save the personalizations I made to this install. HDD is out of bounds. but I have a few GB in a usb stick.
[18:01] <lotuspsychje> Amadeus: did you sudo
[18:01] <lotuspsychje> tharkun: backup data or configs?
[18:02] <tharkun> lotuspsychje: I installed a wm and tweaked a few config files. If there is a blanket way of saving stuff would be best.
[18:03] <lotuspsychje> tharkun: aptoncd can backup your favorite packages
[18:03] <Amadeus> lotuspsychje: I'm not using the terminal, I just right click and select "Run with Wine", but it gives me the error. Sorry for being such a noob, I'm new to ubuntu
[18:03] <tharkun> Do I need to install or is it on regular ubuntu_
[18:03] <lotuspsychje> !info aptoncd | tharkun
[18:04] <Sumitabha> What about ubuntu 14.10 instead of 14.04, lotuspsychje ?
[18:04] <lotuspsychje> tharkun: or rsync is promoted by many users also
[18:05] <Sumitabha> Oh yeah, I showed elfy the error logs from both crashes
[18:05] <lotuspsychje> Sumitabha: thats your choice really mate, im a fan of 14.04 LTS
[18:05] <tharkun> lotuspsychje: lol it is beyond my reach. Currently to run notion I had to create a user and logout then login within notion, Since the system does not have a root account I can no longer install programs <P
[18:05] <psychephylax> Hi arges
[18:05] <psychephylax> Are you around?
[18:06] <Sumitabha> she said she noticed something strange about the USB in the system data Igave her
[18:06] <Amadeus>  
[18:06] <Juon> http://ur1.ca/jre1k
[18:06] <Amadeus>  
[18:06] <Juon> Hiii
[18:06] <Juon> I need help
[18:06] <Amadeus> Juon: What do you need?
[18:06] <OerHeks> Juon, what is that url ? i dare not click it.
[18:06] <lotuspsychje> tharkun: without root its gonna be hard
[18:06] <Pici> Juon: That looks like a fedora install. This is #ubuntu
[18:07] <Juon> Sorry.
[18:07] <lbracher> Hi there! I'm trying to reinstall ubuntu from an USB stick, but the reinstall option is not enabled. Do you know how can I do in order to force it? TIA!
[18:07] <Juon> Anybody respond me
[18:07] <Pici> Juon: Ask in #fedora, not here.
[18:07] <Amadeus> lotuspsychje: Any ideas?
[18:07] <Amadeus> Juon: go to #fedora
[18:07] <lotuspsychje> Amadeus: what is it exactly you try to 'run with wine'?
[18:08] <OerHeks> Amadeus, running a wine app as root, is not really safe. use the proper windows version, see this last answer >>> http://ubuntuforums.org/archive/index.php/t-2169620.html
[18:08] <SchrodingersScat> lbracher: re-install? you can either try to fix it from livecd or do a new install, afaik.  putting /home/ on separate partition sometimes makes this easier
[18:08] <Amadeus> OerHeks: Thank you.
[18:08] <tharkun> lotuspsychje: lol Guess It is staying up until I figure a way to fix it <P
[18:10] <captaineBomberma> somone using kali ?
[18:10] <Sumitabha> lotuspsychje, here are the logs from the first crash:
[18:10] <lotuspsychje> !kali | captaineBomberma
[18:10] <Sumitabha> http://imgur.com/a/9ZA41
[18:11] <psiodrake> how do I check what my ip address is... wait *googles it*
[18:11] <captaineBomberma> same server ?
[18:11] <Sumitabha> lotuspsychje, here are the logs from the second crash... http://imgur.com/a/EKJdB
[18:11] <k1l> captaineBomberma: yes, but they might block root irc users like you
[18:12] <captaineBomberma> for what reason?
[18:12] <Sumitabha> lotuspsychje, here is the system data that elfy requested http://paste.ubuntu.com/10310749/
[18:12] <lotuspsychje> Sumitabha: logs are complaining about packages you need to update
[18:12] <k1l> captaineBomberma: ask them.
[18:12] <Sumitabha> I did that when I installed Chromium
[18:13] <Guest15179> Anyone heard anything about 14.04.2 release ? Is it coming today ?
[18:13] <Sumitabha> I uninstalled google Chrome and then installed Chromium
[18:13] <lbracher> SchrodingersScat: yes, I'm using an livecd ISO on an USB stick. However, when I reach the "Instalation Type" screen it only allows me to erase all. I would like to maintain my /home without wiping it (it's on same partition...))
[18:13] <OerHeks> Sumitabha, so chromium crashed on silverlight? but silverlight is not supported/updated anymore, just use chrome to see netflix and such.
[18:13] <psiodrake> hmmm my eth0 is on a 192.168.x.x ipaddress but my other computers, and the router are on a 10.0.x.x ... subnet mask is the same so how does this have internet connectivity?
[18:13] <Sumitabha> unless you are talking about the chromium error logs
[18:13] <lotuspsychje> Sumitabha: i would try a fresh reinstall of xubuntu 14.04 with cable internet and updates enabled
[18:14] <lotuspsychje> Sumitabha: then see if your chromium is workable again
[18:14] <Sumitabha> I can do that, though my connection is slow
[18:14] <Sumitabha> using a phone line
[18:14] <captaineBomberma> judgmental
[18:14] <Sumitabha> should I install Chrome or Chromium?
[18:14] <Amadeus> How would I try telling an .exe file to run under Win98, when possible?
[18:14] <Sumitabha> oh, may be best to avoid both, and stick to Firefox?
[18:14] <lotuspsychje> Sumitabha: chromium browers is the more lightweight
[18:15] <k1l> !wine | Amadeus
[18:15] <BluesKaj> psiodrake, route -n will give the router/gateway IP , if that's what you need
[18:15] <lotuspsychje> Amadeus: what kind of exe are you trying to run with wine?
[18:15] <k1l> Amadeus: its in the settings of wine. but best is to ask the wine guys. see the bots mesage
[18:15] <Sumitabha> ok, I"m going to hook up a new graphics card before  I make the fresh install
[18:15] <SchrodingersScat> lbracher: don't think that's possible, you can try to repair.
[18:16] <psiodrake> BluesKaj: I want the ip address for my pc
[18:17] <lbracher> SchrodingersScat: Oh, what a pity. No problem. Thank you! :)
[18:17] <KlausedSource> i recently changed my hostname. now sudo prompts me everytime "sudo: unable to resolve host <hostname>"
[18:17] <KlausedSource> is that bad or can i ignore it?
[18:17] <lotuspsychje> !hostname | KlausedSource
[18:17] <OerHeks> psiodrake, " ifconfig | perl -nle'/dr:(\S+)/ && print $1'  "
[18:18] <psiodrake> OerHeks: O_O
[18:18] <OerHeks> !hostname
[18:18] <user030792> quit
[18:18] <samuel_> anyone know how to install gvfs 1.20.3?
[18:18] <KlausedSource> guess i didnt change /etc/hosts thx
[18:18] <OerHeks> KlausedSource,  did you change it both places? see ubottu
[18:18] <BluesKaj> psiodrake, ifconfig, the inet line will give the pc IP
[18:19] <psiodrake> BluesKaj: I saw it thanks
[18:19] <psiodrake> weird though coz I can't see this box on the network from any other computer at all
[18:20] <samuel_> anyone know how to install gvfs 1.20.3?
[18:21] <lotuspsychje> samuel_: maybe here: https://launchpad.net/ubuntu/+source/gvfs
[18:22] <samuel_> do I have to compile then lotuspsychje ?
[18:22] <lotuspsychje> samuel_: whats wrong with your version right now?
[18:23] <samuel_> the timeout issue with FTP
[18:23] <samuel_> it's been a bug for years
[18:23] <samuel_> and looks like it is fixed in that ver.
[18:23] <BluesKaj> psiodrake, what kind of network, workplace, school , home ?
[18:24] <psiodrake> BluesKaj: home
[18:24] <lotuspsychje> samuel_: you can click on that url on the 1.20.3 and download the .deb
[18:24] <psiodrake> my linux here is running on vmware and I can actually ping the host os from here
[18:25] <BluesKaj> psiodrake, otherwindows pcs running W8?
[18:25] <psiodrake> BluesKaj: all other pcs running W7 actually
[18:26] <psiodrake> oh wait I can ping the linux from the host... can't from other pcs though lol
[18:26] <BluesKaj> ok psiodrake , vmware is not my forte, so i can't suggest much
[18:29] <psiodrake> BluesKaj: s'ok I just wanted to understand the networking here and I understand better now
[18:29] <Amadeus> Does anybody know "Tanji"?
[18:29] <Anonymoooooz> Does anybody know the program Tanji?
[18:30] <k1l> !info tanji
[18:30] <Anonymoooooz> !info
[18:30] <Anonymoooooz> !info tanji
[18:30] <k1l> Anonymoooooz: that program doesnt exist
[18:30] <Anonymoooooz> It does, it just doesn't appear here
[18:31] <Anonymoooooz> "How does one guess a password by brute force?" Haha
[18:32] <k1l> Anonymoooooz: that is not a topic for this channel
[18:32] <Anonymoooooz> What channel do you suggest?
[18:35] <miguel_morgenste> my ubuntu work on vm
[18:35] <Anonymoooooz> "Tanji must be ran with administrator privileges"
[18:36] <zooko> Hi folks! whoopsie seems to be unable to upload crash reports to Ubuntu because, if I'm understanding correctly, "server replied with: Peer certificate cannot be authenticated with given CA certificates".
[18:36] <zooko> E.g. https://defuse.ca/b/R7pZn5tTAvpkEWoHBObcgA
[18:37] <zooko> I'm actually not sure if it is an Ubuntu server that is saying it can't authenticate my client, or if the "server" in that error message is actually a local service running on my laptop.
[18:37] <Anonymoooooz> Roses are red, Violets are blue, I ask questions and nobody replies, Boo-hoo
[18:37] <Anonymoooooz> -.-
[18:37] <k1l> Anonymoooooz: aka amadeus. we already told you what to do with your windows programs
[18:37] <OerHeks> Anonymoooooz, you'll find no help here.
[18:37] <zooko> I have ca-certificates and ca-certificates-java installed, versions 20130906ubuntu2 and 20130815ubuntu1 respectively.
[18:38] <k1l> and we dont help you run running brute force programs. go and read the documentation if you need it for not illegal purposes.
[18:39] <crank__> hi there, how do i make a .gif file with transparent background in Gimp?
[18:41] <zooko> Opened a bug report: https://bugs.launchpad.net/whoopsie/+bug/1423657
[18:41] <lbracher> crank__: it will be quicker to ask that on #gimp channel. I think only a few here knows how to use gimp...
[18:41] <lotuspsychje> !info gifsicle | crank__
[18:41] <miguel_morgenste> i install ubuntustudio on virtualbox for test and not run jumin
[18:42] <genii> !info jumin
[18:42] <genii> Hm
[18:42] <zooko> Oh, looks like I needed some security updates to nss and related packages that just arrived.
[18:42] <miguel_morgenste> the program good job? or it is unstable soft
[18:43] <miguel_morgenste> *work
[18:45] <crank__> ubottu > tnx, i'll just take a look. It's a programme?
[18:47] <lotuspsychje> crank__: this looked interesting for your issue: --background color
[18:47] <lotuspsychje>             Set the output GIF’s background to color.  The argument  can  have
[18:47] <lotuspsychje>             the same forms as in the --transparent option below.
[18:47] <keevitaja> unity has this "system menu" on the right side of the panel. where can i configure items it holds? suddenly Shutdown does not show the shutdown/restart dialog option anymore and just logs out.
[18:47] <keevitaja> 14.04
[18:48] <dagerian> Anyone mind helping me solve my boot issue?
[18:49] <lotuspsychje> keevitaja: there's an interesting indicator : classicmenu-indicator
[18:49] <crooksey> Is there an official ipsec vpn application for ubuntu? I can see PPTP support and strongswan/cisco. But no standard Ipsec?
[18:49] <lotuspsychje> keevitaja: shows you all categories, system prefs etc
[18:49] <trism> crank__: you don't have to do anything special, just make sure your layers have an alpha channel (right click the layer, add alpha channel if not)
[18:49] <lotuspsychje> dagerian: if you mind to share your problem
[18:50] <trism> crank__: then Export as/ and end the filename in .gif
[18:50] <rgb-one> Hello
[18:50] <lotuspsychje> rgb-one: welcome
[18:50] <rgb-one> Does anyone here have experience with matlab and matplotlib?
[18:51] <Squall5668> crooksey: you should already have ipsec available on a default Ubuntu installation. Unless you need a daemon running on a server to connect via ipsec
[18:51] <crooksey> Squall5668: ipsec is not a default VPN option, checked my laptop and desktop
[18:51] <lotuspsychje> dagerian: did you try a sudo update-grub?
[18:52] <crooksey> I have an external server I need to connect to
[18:52] <crank__> trism > tnx. i'll try that too. I just installed gifsicle
[18:52] <lotuspsychje> !dualboot  | dagerian this might help also
[18:53] <trism> crank__: of course if you created a new image with the default settings, the default background will be filled with white so you'll need to add a new layer and delete that one (or clear it)
[18:53] <dagerian> Ok thanks for the information I will try to restart now and see what it does after the update-grub
[18:54] <lotuspsychje> dagerian: good luck
[18:54] <rgb-one> anyone here with experience using matplotlib
[18:54] <rgb-one> ?
[18:55] <dgarstang> On a ubuntu repo, where do I drop the .deb files?
[18:55] <crooksey> rgb-one: yes
[18:55] <dgarstang> dists? pool?
[18:55] <crank__> trism > well, i'm not used to work with layers. so, i installed gifsicle
[18:56] <nibbler> dgarstang: you mean, if you maintain a repository?
[18:56] <dgarstang> nibbler: yah
[18:56] <rgb-one> crooksey: Can you help me convert some matlab code to the matplotlib equivalent?
[18:57] <rgb-one> Here is a link to the code https://bpaste.net/show/677af94b1daa
[18:57] <crank__> trism > but now i don't find the programme in my progr menu  :-/
[18:57] <lotuspsychje> !repo | dgarstang
[18:58] <Squall5668> crooksey: try the 'network-manager-vpnc' package. I can't help you, but i can tell you that regular vpnc works fine
[18:58] <dgarstang> lotuspsychje: that doc only talks about the official repositories
[18:58] <Squall5668> crooksey: it might do the job
[18:58] <crooksey> Squall5668: yea it doesn't for my use case, but thanks
[19:00] <lotuspsychje> dgarstang: how about this1: https://help.ubuntu.com/community/Repositories/Personal
[19:00] <crank__> hi there, i installed the programme GIFSICLE. But now i don't find the programme in the menu..?
[19:01] <lotuspsychje> crank__: man gifsicle from terminal, its not gui
[19:02] <crank__> lotuspsychje, tnx. what do i exactly write in terminal, then?
[19:02] <lotuspsychje> crank__: read the manual mate, never used it myself
[19:02] <trism> crank__: probaby easiest just to use gimp, File/New Image, go to Advanced options, select Fill With/Transparency then you have a nice blank image to work with
[19:03] <poccere-China> bye
[19:05] <crank__> trism > oki, trying now (my Gimp is in french and i'm danish, but however  :)
[19:12] <HueHueBr> Olá
[19:12] <jaybuntu> hi all, I'm trying to install remastersys. I followed this tuto that alredy worked for me : http://www.linuxmintusers.de/index.php?action=wiki;page=remastersys when I did "dpkg -i", it crashed the system, so I rebooted and tried again but it returned errors: http://pastebin.com/wr66D812 someone in french channel suggested to do sudo apt-get install *.deb but it returned only errors: http://pastebin.com/1B0XDray can someone help?
[19:12] <lotuspsychje> !es | HueHueBr
[19:13] <lotuspsychje> !info remastersys
[19:13] <OerHeks> jaybuntu, linuxmint?
[19:14] <OerHeks> they have their own issues
[19:14] <Ben_g> Hi
[19:14] <jaybuntu> OerHeks: this part of this system is common isn't it?
[19:14] <lbracher> !br | HueHueBr
[19:14] <OerHeks> jaybuntu, as common as ubuntu+debian, seek help in the mint channel please
[19:14] <Ben_g> I know this probably isn't the right channel for that, but does someone here know a lot about PC hardware?
[19:15] <Pici> Ben_g: ##hardware does
[19:15] <jaybuntu> OerHeks: i know but they don't help... those channels are so much less active than ubuntus....
[19:15] <Ben_g> Pici: also on freenode?
[19:15] <Pici> Ben_g: indeed
[19:15] <Ben_g> Pici: thanks.
[19:16] <OerHeks> jaybuntu, see line 10: dpkg: warning: downgrading oem-config-remaster from 2.18.8-1linuxmint8 to 2.18.8 > clearly a mint issue
[19:16] <jaybuntu> OerHeks: ok thank you !
[19:16] <lotuspsychje> jaybuntu: so make your life easy and install a fresh ubuntu 14.04
[19:27] <mazzy> I have created a forwarding rule using iptables. very simple iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT
[19:27] <twiler> Hello, everyone, I need help understanding something in android studios development page... It says: To launch Android Studio, navigate to the android-studio/bin/ directory in a terminal and execute studio.sh., So, how do I navigate to a specific directory in terminal?
[19:27] <mazzy> all the traffic comes from eth1 have to be forwarded to eth0 interface
[19:27] <Prezident> Ben_g: whats up_
[19:27] <mazzy> the traffic arrives correctly to eth1
[19:28] <mazzy> but executing tcpdump on eth1 I don
[19:28] <Cybuss> twiler cd /directory/directory/directory
[19:28] <mazzy> see any traffic
[19:28] <mazzy> ubuntu server 14.04
[19:28] <twiler> And, do I have to use a "run" command, or something like that, or, is that assumed by linux when you specify a file?
[19:28] <twiler> Oh, ok, cybuss!
[19:29] <mazzy> does exist a way to debug iptables?
[19:29] <Cybuss> where is the android studio on your computer?
[19:29] <TJ-> mazzy: If you don't see the traffic using "tcdump -i eth1 ...", how do you now it is arriving?
[19:29] <twiler> oh yeah, and how do I give someone a cookie?
[19:29] <twiler> cookie | cybuss
[19:29] <mazzy> TJ-
[19:29] <twiler> cybuss | cookie!
[19:29] <mazzy> no trafic is printed out
[19:29] <twiler> cookie! | cybusss
[19:30] <OerHeks> try !cookie | Cybuss
[19:30] <mazzy> the counter in iptables is 0
[19:30] <twiler> !cookie | cybuss
[19:30] <mazzy> these are all signs that the traffic is not forwarded
[19:30] <Cybuss> lol
[19:30] <twiler> Awesome, thanks a lot Oerheks@
[19:30] <TJ-> mazzy: Yes, you said. But then how then can you also say " the traffic arrives correctly to eth1" ?
[19:30] <twiler> !cookie | OerHeks
[19:31] <twiler> You too, OerHeks!
[19:31] <mazzy> sorry TJ- reading again what I have written I realized I made a mistake
[19:31] <mazzy> I mean eth0
[19:31] <mazzy> I execute eth0 and I don't see any traffic coming in
[19:31] <Coldfusionstorm> Hi Everybody, Im Having problems with my Ethernet, It seems Wonky, And im suspecting it's the ALX driver
[19:32] <TJ-> mazzy: Ahhh! :) So you're looking for the egress packets on eth0 that should be being forwarded from eth1, and you don't see them?
[19:32] <Cybuss> 2 useful things for navigating directorys in shell, LS to display files/folders in the current directory, and to finish the name of a directory/file hit tab
[19:32] <mazzy> exactly TJ-
[19:32] <mazzy> I have activated all the required flags
[19:32] <Voltasalt> Hey, I just got a vps with Ubuntu 14.04 server installed, java can't connect to anything, something about a keystore, what could this be caused by?
[19:33] <mazzy> I don't have any idea
[19:33] <mazzy> I have tried everything
[19:34] <TJ-> mazzy: Can you show me: "pastebinit <(sudo iptables-save)" ?
[19:34] <genii> mazzy: Does ifconfig actually show a device called eth0 ?
[19:34] <mazzy> yes genii sure
[19:34] <TJ-> mazzy: My bet is you have a rule in the FORWARD table prior to your ACCEPT rule, that is DENYing
[19:34] <mazzy> ok TJ- I'm going to post it
[19:34] <Voltasalt> anyone?
[19:35] <genii> ( some machines like Dell have different interface names now)
[19:35] <mazzy> http://pastebin.com/CcMNsag5
[19:35] <clevrpwn> is anyone else having problems with the vivid repositories?
[19:35] <mazzy> the name is deth1 and deth0 don't considering it
[19:36] <twiler> Damnit, It's not working
[19:36] <mazzy> consider that is eth1 and eth0
[19:36] <twiler> Can anyone help me out?
[19:36] <twiler> Please?
[19:36] <twiler> I'm trying to intall Android Development Studios
[19:36] <twiler> But, I can't seem to get the studio.sh file to open or work, or whatever
[19:37] <Tinche> twiler, what's the problem
[19:37] <clevrpwn> twiler you have to set the executable bit in the file properties
[19:37] <mazzy> TJ-
[19:37] <twiler> @Tinche: OK, thanks a lot for respoding to me!
[19:37] <OerHeks> clevrpwn, support for vivid in #ubuntu+1 please
[19:37] <mazzy> as you may see just a simple iptables
[19:37] <clevrpwn> OerHeks thank you
[19:38] <twiler> OK, Cleverpwn, I don't know what that menas
[19:38] <twiler> means*
[19:38] <Voltasalt> Hey, I just got a vps with Ubuntu 14.04 server installed, java can't connect to anything, something about a keystore, what could this be caused by?
[19:38] <twiler> Maan lol
[19:38] <Tinche> twiler, no problem, just give us a little more info :)
[19:38] <twiler> Linux is HARD
[19:38] <twiler> @Tinche , ok!
[19:38] <TJ-> mazzy: That's not output from iptables-save
[19:38] <Tinche> so you downloaded android studio and unzipped it?
[19:38] <acz32> did anyone switch to ubuntu from debian?
[19:39] <mazzy> ok I'm going to post iptables-save
[19:39] <mazzy> http://pastebin.com/EvadSdED
[19:39] <mazzy> here is TJ-
[19:40] <TJ-> mazzy: Thanks. You should know that by default 'iptables' only shows you the 'filter' tables. There's also 'nat' (used in forwarding), 'mangle' and 'raw'
[19:40] <twiler> @Tinche: So, I downloaded the android studios SDK a little while ago.  And I extracted it to:Home/Desktop/Downloaded Software.. SO, the directory to any file that they're referring to, is; Home/Desktop/Downloaded Software/android-studio
[19:41] <mazzy> ok I didn't know it
[19:41] <TJ-> mazzy: The interface names, "dethX" should be "ethX", surely?
[19:41] <Tinche> twiler, alright. I'm guessing there is a bin/ subdirectory in Downloaded Software/android-studio, right?
[19:41] <twiler> @Tinche, som it says on their page, that to install it, all I have to do is: "Nnavigate to the android-studio/bin/ directory in a terminal and execute studio.sh."
[19:41] <mazzy> yes it named by me but don't considering it
[19:42] <twiler> Yeah!
[19:42] <twiler> There is.
[19:42] <Tinche> twiler, alright. Inside there is a file called studio.sh?
[19:42] <mazzy> deth0 is eth0
[19:42] <mazzy> deth1 is eth1
[19:42] <mazzy> is just naming convention i'm using here
[19:42] <twiler> Yes, there is
[19:42] <twiler> So., what do I do?
[19:42] <TJ-> mazzy: Does "ip link show" list the interfaces as "ethX"? If so, you need to use those same names. Unless you have alias interfaces configured
[19:43] <Coldfusionstorm> did somebody highlight me?
[19:43] <mazzy> no sure iip link show shows deth1 and deth0
[19:43] <clevrpwn> twiler are you running ./studio.sh or just studio.sh in the terminal?
[19:44] <mazzy> don't worry about it it is just naming convention I'm using here
[19:44] <twiler> I don't understand the question, clevrpwn
[19:44] <OerHeks> Coldfusionstorm, what makes you think that?
[19:44] <Coldfusionstorm> my chat blinked
[19:44] <mazzy> TJ- do you see something weird on iptables?
[19:44] <Coldfusionstorm> but isee that can't be it
[19:44] <Coldfusionstorm> because i heard the sound this time
[19:44] <Coldfusionstorm> and theres no way i missed that before
[19:44] <twiler> I am trying to just run studio.sh, like it says to do on the website
[19:45] <Coldfusionstorm> Also my microphone is listed and it shows input in Pulseaudio
[19:45] <Coldfusionstorm> But no audio is actually passed on to skype
[19:45] <Tinche> twiler, you need to execute this file. You're using the normal Ubuntu?
[19:45] <Coldfusionstorm> it has worked just a couple of days before btw
[19:45] <clevrpwn> twiler in *nix you have to put a ./ in front of studio.sh in the terminal or it wont run
[19:45] <twiler> I am running Ubuntu
[19:46] <twiler> 14.XX whatever
[19:46] <Tinche> twiler, alright. Are you browsing using the file manager or a terminal application, like gnome terminal?
[19:46] <twiler> 14.04 right?
[19:46] <twiler> File explorer
[19:46] <genii> twiler: Files that have .sh extension are supposed to be run with sh (shell) so yopu have to do like either: sh studio.sh  or else ./studio.sh and the file should be set executable
[19:46] <OerHeks> Coldfusionstorm, good start https://help.ubuntu.com/community/SkypeTroubleshooting
[19:46] <twiler> LIke  in windows
[19:46] <Voltasalt> Hey, I just got a vps with Ubuntu 14.04 server installed, java can't connect to anything, something about a keystore, what could this be caused by?
[19:46] <Tinche> genii, he's using nautilus, so it's a little harder :)
[19:46] <twiler> Which is what I'm used to .. :/
[19:46] <Coldfusionstorm> Thanks OerHeks , Sigh, il look at it
[19:47] <Tinche> twiler, alright. It's not wrong :)
[19:47] <Tinche> twiler, do this. right click on studio.sh, click properties
[19:47] <TJ-> mazzy: Does "cat /proc/sys/net/ipv4/ip_forward" report "1" ?
[19:47] <TJ-> mazzy: Secondly, does this "cat /proc/sys/net/ipv4/conf/*/forwarding" report "1" for every interface?
[19:47] <twiler> OK, done
[19:47] <twiler> SO, what tab to I want?
[19:48] <TJ-> mazzy: And thirdly, can you confirm it is mainly IPv4 traffic you are trying to forward (if it's IPv6 we need to check other settings, too) ?
[19:48] <twiler> Open With?
[19:48] <Tinche> twiler, go to the permissions tab, down at the bottom check 'execute: allow executing file as program'
[19:48] <twiler> ok!
[19:48] <mazzy> for the first question about 1 on the ip_forward file the answers is yes TJ-
[19:48] <twiler> ok,  it was aready checkec!
[19:48] <twiler> Checked*
[19:48] <Tinche> twiler, ok, we're not done though. the file manager is configured to be careful with executable shell scripts
[19:48] <hid> hi
[19:49] <hid> i'm trying to install flac 1.3.1
[19:49] <TJ-> mazzy: We're hoping for "1" on all those since "1" == TRUE, or YES (0 == FALSE or NO)
[19:49] <Tinche> twiler, now close the properties window, and open the file manager preferences (from the file menu)
[19:49] <hid> but after a 'make' i have a problem with '-fPIC'
[19:49] <twiler> ok, Tinche
[19:49] <twiler> What?
[19:49] <twiler> The file menu?
[19:49] <Tinche> well, the 'files' menu
[19:49] <hid> i tried to add -fPIC to the Makefile CXXFLAGS but it does not work
[19:49] <twiler> I'm not familiar with that..
[19:50] <Tinche> twiler, with the file manager selected, go top left
[19:50] <mazzy> TJ- 1 for both the interfaces
[19:50] <twiler> ok..
[19:50] <mazzy> and third question yes is ipv4 traffic
[19:50] <Tinche> twiler, there will be a menu
[19:50] <Tinche> twiler, like in windows, where every window has a menu
[19:50] <Tinche> twiler, but in Ubuntu this menu is in the top of the screen
[19:51] <Coldfusionstorm> Thanks
[19:51] <Coldfusionstorm> that fixed it
[19:51] <twiler> Yeah, ok
[19:51] <twiler> I'm with you
[19:51] <TJ-> mazzy: OK, so how I have to ask... the connection to the physical port 'deth1' - what is it connected to, a router or switch, or another host PC ?
[19:51] <Tinche> twiler, so the first item will be 'files', inside there select 'preferences'
[19:51] <mazzy> it isn't a physical connect
[19:52] <mazzy> it is a virtual connection
[19:52] <TJ-> mazzy:  iptables reported the counters for the FORWARD chain at 0, which suggests no packets are arriving on that interface at all, regardless of rules
[19:52] <twiler> do you mean "properties?"
[19:52] <mazzy> to an linux bridge
[19:52] <Tinche> twiler, left item of that
[19:52] <twiler> Cause, I don't see a peferences option in the files submen
[19:52] <Tinche> twiler, there are two top-level items, 'files' and 'file'
[19:53] <mazzy> I'm going to check if I can generate traffic from that port
[19:53] <Tinche> it's confusing now that I think about it :p
[19:53] <TJ-> mazzy: OK, so what is supposed to be feeding packets to deth1? I'd be looking at the 'device/VM' that is connected to it, by monitoring its output into that 'pipe'
[19:53] <twiler> OH I found it
[19:53] <twiler> It's under edit
[19:53] <twiler> FYI ;)
[19:53] <Tinche> twiler, yeah that works
[19:53] <Tinche> twiler, behavior tab
[19:53] <twiler> OK, I'm there
[19:53] <twiler> OK..
[19:54] <Tinche> twiler, executable text files -> ask every time
[19:54] <twiler> With you :)
[19:54] <twiler> ok
[19:54] <twiler> done..
[19:54] <Tinche> now try double clicking studio.sh
[19:54] <TJ-> mazzy: Is 'deth1' an interface connected to a bridge "brctl show" ? If so, you'll need to forward using the bridge interface
[19:55] <twiler> K, Its asking me, if i want to run it in terminal, or just run?
[19:55] <Tinche> just run
[19:55] <twiler> aWW MAN@
[19:55] <twiler> yeah!
[19:55] <Tinche> alright!
[19:55] <twiler> You are the man@
[19:55] <twiler> !cookie | TInche X 1000
[19:56] <mazzy> yes TJ-
[19:56] <twiler> OOPs
[19:56] <Tinche> by the way, the next ubuntu release will have access to a tool called ubuntu make, which will allow you to automate things like this (and it supports android studio)
[19:56] <twiler> x1000 !cookie | Tinche
[19:56] <twiler> Mann!
[19:56] <twiler> !cookie | Tinche
[19:56] <twiler> Soo
[19:56] <Tinche> actually you can use it now, but you need to add a ppa, maybe it's a little complicated if you're still new
[19:56] <Tinche> ;)
[19:57] <twiler> Tinche, have you ever heard of bitcoin?
[19:57] <twiler> Or done anything with it?
[19:57] <Tinche> a 'thanks' is enough ;)
[19:57] <Tinche> alright, gotta bail for now
[19:57] <twiler> Cause, I have about 10 Ths of mining power in the basement1
[19:57] <lotuspsychje> twiler: there's a #bitcoin channel
[19:58] <twiler> OK, Tinche thanks for all of your help!
[19:58] <twiler> OH really?
[19:58] <Tinche> you are very welcome, I hope you have fun with Ubuntu!
[19:58] <twiler> How do I get thyere?
[19:58] <lotuspsychje> twiler: there is also software to create an ubuntu bitcoin miner server
[19:58] <twiler> I already am Tinche!
[19:59] <twiler> Oh really?
[19:59] <lotuspsychje> twiler: type /join #bitcoin
[19:59] <twiler> That's super4 cool!
[19:59] <twiler> RIght from here?
[19:59] <twiler> I can type that?
[19:59] <Pici> yes
[19:59] <twiler> OK thanks a lot, guys!
[20:00] <twiler> oh, how come you were able to type that in a message to me?
[20:00] <twiler> Without joining yourself?
[20:00] <twiler> Quotes?
[20:00] <twiler> Around the part you didn't want to be executed?
[20:00] <lotuspsychje> twiler: chat clients recognize the # as a joinable channel
[20:01] <twiler> OK, cool thanks
[20:01] <guest-lFtnPE> Hello guys
[20:01] <twiler> I get the hint.
[20:01] <twiler> LOL
[20:01] <pilppe> is Xubuntu the same as Ubuntu?
[20:01] <pilppe> but just with XFCE?
[20:01] <guest-lFtnPE> I have a big problem
[20:01] <twiler> Thanks a lot, everyone!
[20:01] <lotuspsychje> !xubuntu | pilppe
[20:01] <OerHeks> pilppe, yes
[20:01] <pilppe> wut can i intall xubuntu from ubuntu?
[20:01] <pilppe> do i need to wipe my HDD?
[20:01] <OerHeks> sudo apt-get install xubuntu-desktop
[20:02] <pilppe> before installing xubuntu
[20:02] <guest-lFtnPE> I don't know what happen but when I start my computer I can't loggin in my session. I can only connect as a guest session
[20:02] <pilppe> im installing xubuntu
[20:02] <pilppe> after that i restart and its XFCE?
[20:02] <guest-lFtnPE> When I try connect myself througt tty6 I can
[20:02] <OerHeks> pilppe, no, after install, logout, change to xubuntu and login
[20:02] <lotuspsychje> guest-lFtnPE: wich ubuntu version?
[20:02] <guest-lFtnPE> 14.04 MTS
[20:02] <guest-lFtnPE> LTS*
[20:02] <pilppe> so i dont need to restart? lol
[20:03] <guest-lFtnPE> In my tty6, when I am logged, I run "unity" but it doesn't start
[20:03] <lotuspsychje> guest-lFtnPE: maybe try the recoverymode failsafeX
[20:04] <OerHeks> guest-lFtnPE, try tty7 ( ctrl alt F7)
[20:04] <guest-lFtnPE> look the result of unity : http://paste.ubuntu/10312992
[20:05] <pilppe> is XFCE way better than Unity?
[20:05] <doomlord_1> i prefer it
[20:05] <pilppe> ive heard only good things about xubuntu
[20:05] <doomlord_1> its simpler and more traditional so there's less to go wrong
[20:05] <pilppe> and it doesnt take as much AM
[20:05] <pilppe> RAM?
[20:06] <doomlord_1> my conclusion on linux desktop environments is simpler is better. the complicated ones dont work as well as , say, OSX.(Imo).
[20:06] <lotuspsychje> pilppe: xubuntu runs lightweight yes
[20:06] <guest-lFtnPE> OerHeks, When I try to login throug tty7, I can't
[20:06] <pilppe> awesome
[20:06] <guest-lFtnPE> Actualy, I can't start unity under my session
[20:06] <pilppe> im very new to ubuntu
[20:06] <guest-lFtnPE> but under guest session it's work
[20:06] <pilppe> and i liked the way XFCE looks like
[20:06] <pilppe> close to windows
[20:06] <pilppe> but not too close
[20:06] <pilppe> and more lightweight
[20:06] <pilppe> can i keep the same drivers as on normal ubuntu?
[20:07] <lotuspsychje> pilppe: ubuntu has a different method of drivers then windows
[20:07] <pilppe> yeah ik
[20:07] <doomlord_1> i assume xubuntu just uses the same repositories ?
[20:07] <pilppe> but im using ubuntu 14.10 atm
[20:07] <pilppe> i change to xubuntu do i keep the same drivers?
[20:07] <pilppe> does my game performance get worse? im sorry if im asking stupid questions
[20:08] <guest-lFtnPE> Someone can help me ???
[20:08] <lotuspsychje> pilppe: if you install xubuntu-desktop from your existing ubuntu, it will use same drivers
[20:08] <pilppe> ok
[20:08] <pilppe> i got unknown media type
[20:08] <pilppe> wtf
[20:08] <lotuspsychje> guest-lFtnPE: something got wrong with your user, try recoverymode
[20:08] <pilppe> is it bad?
[20:08] <Mike321> ok guys i need some help. yesterday i got help with installing ubuntu 14.04 on an older desktop. i then used the internet to find some commands to enable wireless via my usb netgear a6100 wireless adapter. i had the computer (desktop) on the other side of te house plugged into the ethernet. once i got the wireless working i moved everything to where it would be used. it has done an update now and there is no wireless. someone help so 
[20:08] <guest-lFtnPE> How can I do that ?
[20:08] <pilppe> it seems to be a problem with kde.xml after a quick google
[20:08] <lotuspsychje> !recovery | guest-lFtnPE
[20:09] <pilppe> does it affect my installation?
[20:09] <pilppe> whatever im switching to xubuntu :DD
[20:10] <guest-lFtnPE> lotuspsychje, the problem is : When I use "unity" I have a problem
[20:10] <guest-lFtnPE> But When I use "startx" unity run
[20:11] <lotuspsychje> guest-lFtnPE: guest also uses unity right?
[20:11] <mazzy> TJ-
[20:11] <mazzy> deth0 is connected to a bridge
[20:11] <lotuspsychje> guest-lFtnPE: you can try to make a new user, test unity from there
[20:11] <mazzy> deth1 is connected to a different bridge
[20:12] <mazzy> I need to forward the traffic between these two bridges through the host
[20:12] <TJ-> mazzy: OK, so the forwarding rule should use the bridge names
[20:13] <mazzy> what does it mean?
[20:13] <KlausedSource> !mtab
[20:13] <KlausedSource> !/etc/mtab
[20:13] <mazzy> do you mean bridge1  (deth1) -> bridge0 (deth0) ?
[20:14] <mazzy> do I need to use the bridge name ?
[20:14] <mazzy> instead of the interfaces?
[20:14] <OerHeks> guest-lFtnPE, startx is depreciated, " sudo service lightdm start'"  is current way to start unity
[20:14] <EdenStudio> why does Xubuntu think chromium is untrusted?
[20:14] <KlausedSource> well, i just created a new partition, should i add it to mtab or fstab?
[20:14] <mazzy> if so it doesn't have any sense. the host (a docker container) running ubuntu 14.04 sees only deth1 and deth0
[20:15] <EdenStudio> and yeah xubuntu feels way better compared to unity <3
[20:15] <lotuspsychje> EdenStudio: that depends on hardware
[20:15] <TJ-> mazzy: "sudo iptables -A FORWARD -i br0 -o br1 -j ACCEPT" - but if you have other interfaces connected to those bridges all traffic will be forwarded. If you don't want that you'd have to alter the configuration so some interfaces were not using bridges, or used alternative bridges
[20:15] <OerHeks> EdenStudio, chromium is in the repos, if you download it manually, it is untrusted ( no gpg keys)
[20:15] <EdenStudio> how can i make it not untrusted?
[20:15] <EdenStudio> mark as executable?
[20:16] <mazzy> TJ- no is impossible is not that the configuration
[20:16] <OerHeks> EdenStudio, chromium is in the repos, use that version? and you will get updates
[20:16] <EdenStudio> ohh
[20:16] <EdenStudio> sudo apt-get chromium?
[20:16] <mazzy> you need a schema I'm going to post it
[20:16] <EdenStudio> im pretty sure i downloaded chromium from the software center
[20:16] <lotuspsychje> EdenStudio: chromium-browser
[20:17] <EdenStudio> ok awesome
[20:17] <OerHeks> EdenStudio, if you want the game, yes33333333333
[20:17] <lotuspsychje> !info chromium-browser | EdenStudio
[20:17] <EdenStudio> how do i delete my current chromium?
[20:17] <EdenStudio> sudo uninstall or what
[20:17] <TJ-> mazzy: Have you looked at https://docs.docker.com/articles/networking/
[20:17] <lotuspsychje> !purge | EdenStudio
[20:17] <mazzy> yes sure
[20:17] <guest-SOJoF0> So, If I create a new user, i can't start lightdm
[20:18] <argoneus> hello
[20:18] <argoneus> does anyone here virtualize (x)ubuntu using virtualbox?
[20:18] <TJ-> mazzy: That document says docker will maintain it's own rules if you allow it, for forwarding, and other scenarios
[20:18] <mike321> ok i was wrong. im getting an error when going into networking saying t" the system netqwork services are not compatible with this version. can anyone help? it was working fine this morning.
[20:18] <argoneus> I'm wondering if it's normal to have a slight input lag, and choppy movement when moving windows, etc, I already installed guest additions
[20:18] <lotuspsychje> argoneus: ask your issue
[20:18] <lazl0w> At school, they are running Ubuntu 9.something, when you try to shut down the computer from the menu, it hangs forever. But if you choose reboot, it works fine. Is it becuase it isn't allowing sudo?
[20:18] <mazzy> yes I know it
[20:19] <lotuspsychje> !eol | lazl0w
[20:19] <TJ-> mazzy: The output of iptables-save didn't show any docker-specific rule chains
[20:20] <lazl0w> lol I don't have the authority to change my whole universities os of choice
[20:20] <lazl0w> i just want to know if that's what could be causeing that bug
[20:20] <j3imi> hello. does someone know if I install gnupg 2, can I use this newer version in evolution? or will it keep on using version 1?
[20:20] <mike321> im getting an error when going into networking saying t" the system netqwork services are not compatible with this version. can anyone help? it was working fine this morning.
[20:21] <OerHeks> lazl0w, maybe, if that was a bug, it is fixed now. use a supported version.
[20:21] <mazzy> TJ- https://www.dropbox.com/s/xpps0frsgc0a2dg/Screenshot%202015-02-19%2021.21.08.png?dl=0
[20:21] <mazzy> here is the schema
[20:22] <lazl0w> If the university has not allowed our accounts sudo, would that stop the shutdown feature from working? I don't think it's a bug, they just have it configured wrong.
[20:22] <na_> hi
[20:22] <ikonia> I don't see how thats wrong
[20:22] <TJ-> mazzy: I think you need to seek some docker-specific help. The information I'm seeing doesn't match the data you provided.
[20:22] <ikonia> you can set permissions on anything to be set how you want, inside/outside sudo
[20:22] <EdenStudio> how many users can an IRC hold?
[20:23] <ikonia> EdenStudio: depends on many things,
[20:23] <ikonia> not really something #ubuntu deals with though
[20:23] <lazl0w> gotcha
[20:23] <j3imi> twitch uses IRC for their stream chats, and some streams have something like 100k viewers
[20:23] <j3imi> so definitely many
[20:23] <EdenStudio> guys, when im moving a window in Xubuntu really fast, why is the window so slow? didnt happen in Ubuntu
[20:23] <mazzy> TJ- I was pretty convinced that the problem was ubuntu
[20:23] <mazzy> but maybe is something releated to docker
[20:23] <EdenStudio> ok works now
[20:24] <mazzy> although I don't have any idea
[20:24] <lazl0w> guests aren't really in the irc though i dont think
[20:25] <lister> hello, I need to give permissions to the users to the serial port at login time , right now I have to go and type sudo chmod every day to every client
[20:25] <ikonia> lister: change the udev rules,
[20:25] <lister> how can I do it automatically without having to type the roort password
[20:25] <ikonia> or put users in the group that can access it
[20:26] <TJ-> lazl0w: In my experience, those GUI-shutdown hangs were caused by poor interfacing of back-end power management scripts. If it's Ubuntu 9.x that is even more likely; there were issues around that time-frame with ACPI interfaces
[20:26] <lister> thanks
[20:26] <AndreeeCZ> hi. How can i map shift+backspace to act as delete?
[20:28] <lister> what would be a way to add the permission permanently to a user?
[20:28] <mike321> can anyone help me with network issues?
[20:28] <ikonia> put them in a group that can already access it
[20:29] <jk> does anyone know where i can get the id from a binary package for launchpadlib?
[20:29] <ikonia> jk: the "id" ?
[20:29] <simosx> lister, for the serial port, you add the users to the 'dialout' group.
[20:29] <Guest7798> installing 14.04 on a macbook pro. I need "bcmwl-kernal-source" in order to use WiFi. When using the live USB, I can install with apt-get no problem. But now that Ubuntu is installed, apt-get fails to install bcmwl-kernal-source
[20:30] <mike321> was working fine yesterday and this morning. machine powered off and rebooted itself leaving no internet and the error message "the system network service is not compatible with this version" in network manager
[20:30] <Guest7798> Why does it work on the USB, but not the installed ubuntu?
[20:30] <jk> ikonia: the example url is https://api.launchpad.net/1.0/<distribution.name>/+archive/<binary_package.name>/+binarypub/<id> but where do i get the <id>
[20:30] <lister> i just created a group for it but now again how do I give that permission to the group permanently?
[20:31] <ikonia> jk: what do you mean "id" ?
[20:31] <KlausedSource> i learned that mtab shows mountpoints according to fstab
[20:31] <ikonia> jk: what ar eyou tyring to install ?
[20:31] <KlausedSource> why is my fstab on ubuntu empty?
[20:31] <ikonia> KlausedSource: no, mtab shows what it thinks is currently mounted
[20:31] <jk> i try to access the lauchpad api
[20:31] <Guest7798> any way to use apt-get from USB to install package on an installed partition?
[20:31] <KlausedSource> i got a new partition, am i going to add it in fstab? or how do i proceed "the ubuntu way"?
[20:32] <ikonia> KlausedSource: you can add it to fstab just fine
[20:32] <simosx> lister, you asked earlier about the serial port. there is already a 'dialout' group in /etc/group, so you add the users to it. if you try to change permissions, etc, you will have a bad time (because AppArmor).
[20:32] <lister> ok thanks
[20:32] <jk> ikonia: i try to access the launchpad api with python, https://api.launchpad.net/1.0.html#binary_package_publishing_history
[20:32] <KlausedSource> ikonia, i also have another partition which is not in fstab, but mounted on /media is that a problem? my owncloud server uses it as data directory
[20:32] <favasto> ciaooo
[20:33] <favasto> !list
[20:33] <ikonia> KlausedSource: thats happening as a userspace mount, normally with fuse
[20:33] <KlausedSource> ikonia, it is ext4
[20:33] <ikonia> KlausedSource: the file system doesn't matter
[20:33] <KlausedSource> ikonia, i thought fuse is ntfs
[20:34] <lister> simosx , ok I just test it and it is working , great thanks
[20:34] <Guest7798> Maybe I should rephrase. Why can apt-get on the liveUSB install this package without the internet, but apt-get on my newly installed partition not?
[20:34] <KlausedSource> !fuse
[20:34] <ikonia> KlausedSource: no
[20:34] <mike321> can anyone help me with network issues?
[20:34] <mike321> was working fine yesterday and this morning. machine powered off and rebooted itself leaving no internet and the error message "the system network service is not compatible with this version" in network manager
[20:37] <mike321> hello
[20:37] <jk> join #launchpad
[20:42] <Guest7798> are the repos used by the liveCD different than the repos on a default ubuntu install?
[20:43] <j3imi> can I check if a package is installed on my system with apt-get?
[20:44] <_eddy> how do i download my sql database using cmd?
[20:45] <Rory_> j3imi: you can do so with dpkg like this: dpkg -l | grep packagename
[20:45] <_eddy> i wanna save it on a file
[20:45] <TJ-> j3imi: "apt-cache show $PACKAGE_NAME | grep Installed". but the preferred method is "dpkg -l $PACKAGE_NAME"
[20:45] <ikonia> _eddy: download from where ?
[20:45] <Rory_> TJ- 's one is better
[20:45] <_eddy> ikonia: MY LOCALHOST
[20:45] <j3imi> thanks Rory_ and TJ- I'll read documentation about dpkg and apt-cache
[20:45] <_eddy> its on my pc
[20:46] <_eddy> wanna download it a .sql file
[20:46] <ikonia> _eddy: you want to back it up ?
[20:46] <ikonia> _eddy: you can use mysqldump to export it
[20:46] <ikonia> _eddy: you can then move that file anywhere
[20:46] <Rory_> _eddy: look into the program "mysqldump" http://stackoverflow.com/questions/8444108/how-to-use-mysql-dump
[20:46] <_eddy> ikonia: kinda so i can move it to my live database
[20:46] <TJ-> j3imi: "dpkg" is the Debian package manager. It knows about *all* packages you installed, even those installed manually. "apt" only know about packages installed from the archive sources
[20:49] <onla> I was looking for silent laptop alternatives and pref 500 bucks or under. I found a site that listed this t100 but apparently I cant install linux on it http://www.theguardian.com/technology/askjack/2014/apr/17/are-there-any-silent-windows-laptops
[20:49] <onla> or maybe I can
[20:50] <onla> The ASUS "Bay Trail" T100 Is Not Linux Friendly - Phoronix
[20:50] <ikonia> what do you want us to do about it ?
[20:51] <onla> Can anyone recommend very silent laptops like that T100 and that are 500eur or less and can run ubuntu?
[20:51] <ikonia> I have a thinkpad that is very low noise, it really depends on your needs
[20:52] <ikonia> try ##hardware
[20:52] <onla> ok thanks
[20:53] <onla> hmmm. am I not identified with the nickserv o.O I have setup a sasl identif
[20:54] <onla> oh 16:48:15 [Freenode] -!- Irssi: SASL: authentication timed out
[20:54] <ikonia> onla: this isn't an #ubuntu issue
[20:54] <ikonia> talk to #freenode if you need help
[20:55] <onla> oh sorry. I sometimes get a bit carried away :)
[21:00] <KowabungaDude^> k
[21:02] <b-p> help me pls. how can i set to not log 'sql plugin' lines to auth.log: http://pastebin.com/KiktwCJ6
[21:05] <juan_> hola
[21:06] <RAMSay> how do you identify in linux if RDS (Reliable Datagram Sockets) is running?
[21:07] <k1l> RAMSay: see at the output of "ps -ef"
[21:07] <jakesyl> any way to take a screenshot of my server "AS IS" and apply it to another server?
[21:08] <twiler> Hello, everyone, I ned a little bit of help installing android SDK...
[21:08] <twiler> So, here's where I'm at with it:
[21:09] <twiler> I have downloaded and extracted the files to Desktop/Downloaded/android-studio/
[21:10] <twiler> I am attempting to run a file called "studio.sh"
[21:10] <twiler> From the terminal
[21:10] <_eddy> ikonia: and Rory_ thank you
[21:10] <twiler> It's  located in android-studio/bin/
[21:10] <RAMSay> k1l: http://pastebin.com/1A3TnegC
[21:11] <twiler> When I cd to to /bin/ and I type studio.sh, I get this:
[21:11] <RAMSay> k1l: is it a service?
[21:12] <twiler> studio.sh: command not found
[21:12] <twiler> SO, I tried typihg bash studio.sh
[21:12] <twiler> For some reason, I don't know
[21:13] <twiler> lol
[21:13] <twiler> And, I got this:
[21:13] <k1l> twiler: /bin/ is not the same as ~/Desktop/Downloaded/android-studio/bin
[21:13] <twiler> ERROR: Cannot start Android Studio\nNo JDK found. Please validate either STUDIO_JDK, JDK_HOME or JAVA_HOME environment variable points to valid JDK installation.
[21:13] <twiler> I know but, I was already in /bin/
[21:14] <twiler> It said so, on the left side of the terminal
[21:14] <k1l> twiler: /bin is a total different folder
[21:15] <twiler> OK, so, what should I be entering in the terminal?
[21:15] <k1l> what gives "pwd"?
[21:15] <OerHeks> So your errpr is: you have no java/openJDK installed
[21:15] <OerHeks> *error
[21:15] <twiler> I think..
[21:15] <twiler> I don't even know if "bash" was the right thing to type..
[21:16] <k1l> RAMSay: i dont know rds, sorry
[21:16] <twiler> I just typed it.
[21:16] <twiler> LOL
[21:16] <OerHeks> twiler, What does the manual say, do you need oracle java or openjdk? i prefer openJDK, not the oracle binairy blob
[21:16] <twiler> It seemed right at the time.
[21:16] <twiler> The manual?
[21:16] <RAMSay> k1l: no worries, tx
[21:16] <twiler> The manual to what?
[21:17] <twiler> ANdroid sdk?
[21:17] <k1l> twiler: the readme or manual of what you want to install. or are you just blindly typing stuff int your terminal?
[21:17] <twiler> Wow dude, ok..
[21:18] <OerHeks> twiler, really, i have been reading for some time now, how would you develop android stuff if you give those answers.
[21:19] <twiler> WOw, guys
[21:19] <game0> heyo ubuntu players
[21:19] <k1l> twiler: i dont know what command you actually used, what error that command produced and what folder you were running that.
[21:19] <game0> wooow, almost 2000
[21:19] <twiler> Than ks  a lot, I feel sufficiently stupid.
[21:20] <k1l> twiler: you did not answer my questions about that so i can only suggest you look into the readme/handbook to sort it on your own. :/
[21:20] <twiler> Not at you k1l
[21:20] <twiler> LOL
[21:21] <twiler> ok, I will answer your questions:
[21:21] <game0> I'm trying to install in my machine a server for the first time, I don't want to remove my old ubuntu version
[21:21] <twiler> So, I typed the following inhto terminal:
[21:21] <game0> I think it's better using teamviewer
[21:22] <leeyaa> how to install a package without installing extra dependancies
[21:22] <leeyaa> for example when i want to install zabbix-server-mysql
[21:22] <game0> but when I saw the tutorial, I saw that ubuntu server is kernal view
[21:22] <twiler> cd Desktop/downloaded/android-studio/bin/studio.sh
[21:22] <game0> not UI
[21:22] <leeyaa> it also pulls apache and tons of other crap
[21:22] <twiler> It said:
[21:22] <twiler> studio.sh: command not found
[21:22] <game0> So I don't have much time for learning this
[21:22] <k1l> twiler: you cant "cd" into a file
[21:23] <twiler> yeah, I figred tha tout
[21:23] <game0> these days I'm really busy and full
[21:23] <twiler> so, then, to correct myself
[21:23] <twiler> I cd'ed into the bin folder
[21:23] <twiler> And, I got the same answer: studio.sh: command not found
[21:24] <k1l> twiler: what says "pwd"
[21:24] <twiler> So, then, while STILL in that folder, I typed the following:
[21:24] <twiler> bash studio.sh
[21:24] <game0> I need some a good documentation or something that will help me install ubuntu server in my machine
[21:24] <twiler> And it then said:
[21:25] <KlausedSource_> is there a reason why i should use rsync over cp -r?
[21:25] <twiler> ERROR: Cannot start Android Studio\nNo JDK found. Please validate either STUDIO_JDK, JDK_HOME or JAVA_HOME environment variable points to valid JDK installation
[21:25] <tgp1994> Hello! I just installed the latest Ubuntu/Mint onto my laptop in the hopes that Linux in general has reached a point where a user like me can use it everyday. Not so good so far! My Lenovo Y560P laptop appears to be one plagued by a "kworker bug" where it eats up quite a bit of cpu doing jack-all. This heats my laptop up, and doesn't do any favors to battery life. I've tried doing the trick of putting a bash script in a pm folder to disable gpe18, but
[21:25] <tgp1994>  this does not actually disable it. Any help?
[21:25] <twiler> So.. that's where I'm at.
[21:25] <k1l> KlausedSource_: it checks the files with rsync
[21:26] <twiler> What do you mean, what says "pwd"?
[21:26] <KlausedSource_> k1l, like "if file exists in destination, don't overwrite it"? and cp -r does that not?
[21:26] <k1l> twiler: type pwd in that terminal. it will print the fullpath of the folder
[21:26] <twiler> ok
[21:27] <k1l> twiler: it helps us to exact see where you are right now
[21:27] <twiler> So, you mean, from the /bin/ directory>
[21:27] <twiler> ?
[21:27] <twiler> /home/twiler/Desktop/Downloaded/android-studio/bin
[21:27] <k1l> uff. twiler you are mixing /bin/, /home etc etc etc so we need to start on a basis and sort out the easy mistakes.
[21:27] <twiler> That;s where I'm at
[21:28] <k1l> ok
[21:28] <twiler> uff?
[21:28] <k1l> *sigh*
[21:28] <twiler> What is 'uff' sposed to mean?
 *sigh*
[21:28] <twiler> I;'m assuming it's an acronym similar to ffs
[21:28] <KlausedSource_> k1l, did you read my last post?
[21:29] <scorpio18> hi guys , i'm having some problems with my ubuntu server 14.10 on apt , when i run apt-get update i'm getting some error like this one "Err http://ubuntu.bhs.mirrors.ovh.net utopic-backports/restricted i386 Packages 404  Not Found" and this one "W: Failed to fetch http://ubuntu.bhs.mirrors.ovh.net/ubuntu/dists/utopic/restricted/source/Sources  Bad header line"
[21:29] <scorpio18> anyone know any fix for this ?
[21:29] <k1l> twiler: please show the output lines form "ls -al" in that folder in a pastebin
[21:30] <k1l> !paste twiler
[21:30] <k1l> !paste | twiler
[21:30] <k1l> KlausedSource_: yes. and other stuff you want to make sure you get copied what you want
[21:31] <KlausedSource_> k1l, so rsync is better (but more complicated) any good resource where i can learn about it?
[21:31] <KowabungaDude^> Has anyone had an issue using the Ethernet from a PC you booted in Linux from a CD?
[21:31] <KowabungaDude^> ... I'm trying to boot a Dell Optiplex 7010 from an Ubuntu 12.04LTS CD
[21:31] <KowabungaDude^> but network manager says "Cable unplugged"
[21:31] <KowabungaDude^> and if I do it from the terminal ping returns Destination Host Unreachable
[21:32] <k1l> KlausedSource_: learning by doing or give yourself a read on the manpage :) or goolge some howto that suits you best, i dont have one at the hands
[21:32] <twiler> ok, give me a sec I needed to install pastebinit
[21:32] <KlausedSource_> k1l, alright i just stumbled over it on the owncloud documentation and asked myself why not just cp -r
[21:33] <k1l> twiler: you can just copy the text and past it onto the site mentioned there.
[21:33] <KowabungaDude^> I thought it was a bad NIC so I connected a USB2ETH but got the same result.
[21:35] <michele_> DVIX
[21:36] <OerHeks> Divx, not DVIX
[21:42] <spitzi> Hello. Using 14.04, got segmentation fault (core dumped), but no idea where core file is. Any idea?
[21:44] <voip_> hello guys, my last ubuntu server instlalation assigned interface nmes like em1, em2. whats the diference beetwen eth ?
[21:47] <OerHeks> spitzi, if you have apport installed, in /var/crash https://wiki.ubuntu.com/DebuggingProgramCrash
[21:48] <genii> voip_: Dell has a constant naming scheme for interfaces now. You can disable this and revert to eth0 type naming by using  biosdevname=0 as a kernel boot option
[21:49] <voip_> genii, i want to know its just naming or functionaly changed too ?
[21:49] <genii> voip_: The idea of the new naming scheme is that whether you add or remove things all the names stay the same
[21:50] <genii> voip_: Functionally any operation you could do on ethX you can still do, just the name changed
[21:50] <voip_> genii, thank you
[21:51] <genii> voip_: You're welcome
[21:55] <KowabungaDude^> Using 12.04LTS on a CD to boot a PC but eth0 displays "Cable Unplugged" with a static IP set and a cable plugged. Terminal shows no IP assigned. Configured it from terminal and eth0 is up but ping returns "Destination Host Unreachable". Help please ... :|
[21:55] <drizi> Hi guys, i'm on 14.04 and on boot and when pressing atl+alt+f1-6 the console text size is quite large. Seems like a graphics issue. any one got any pointers where to start looking to fix this ? (nvidia card)
[21:56] <voip_> genii, one morphis question, if i type biosdevname=0 will i lose connection with server ?
[21:56] <voip_> mere
[21:56] <voip_> more
[21:56] <k1l> voip_: you will need to reboot for that
[21:57] <genii> voip_: The proper way would be to add into /etc/default/grub the line GRUB_CMDLINE_LINUX="biosdevname=0"  then to issue sudo update-grub and reboot
[21:57] <voip_> it also will change in file /etc/network/interfaces ?
[21:58] <genii> voip_: Yep
[21:58] <voip_> thank you !:)
[22:02] <Coldfusionstorm> Alright, So, Here it is im Using the ALX driver for my Ethernet card, And i have Lot's of issues, THis same PC works perfectly on Windows
[22:03] <Coldfusionstorm> However here, In Linux the internet connection randomly disconnets
[22:03] <bekks> Coldfusionstorm: Which ALX chipset exactly do you have?
[22:03] <Coldfusionstorm> Im not sure
[22:04] <Coldfusionstorm> *i have no idea
[22:04] <Coldfusionstorm> how do i check
[22:05] <Coldfusionstorm> This is my Output bekks from doing
[22:05] <Coldfusionstorm> lspci -nn | grep 0200
[22:05] <Coldfusionstorm> I don't have much experience with command line
[22:05] <bekks> Why do you grep for 0200?
[22:05] <Coldfusionstorm> i looked at a Network debug "tutorial"
[22:05] <Coldfusionstorm> did i ruin something?
[22:06] <drewbert> So sound on my computer works, but when I try to play anything through the terminal I don't hear anything.
[22:06] <bekks> Coldfusionstorm: No, but is is unclear what you are grepping for :)
[22:06] <Coldfusionstorm> alright, It was just me trying to do something
[22:06] <drewbert> I have tried play, aplay, mpg123, and beep.
[22:06] <Coldfusionstorm> i don't even know the function of either grep or lspci
[22:06] <bekks> Coldfusionstorm: Just pastebin "lspci -vn" please.
[22:07] <bekks> Coldfusionstorm: lspci lists all PCI devices found, and grep filters the output for (in your case) all lines containing 0200
[22:07] <Coldfusionstorm> ahhh, so grep is bascially a search function in the output of a given command?
[22:08] <Coldfusionstorm> http://pastebin.com/YRbkUWEg
[22:08] <bekks> Coldfusionstorm: basically, yes.
[22:08] <Coldfusionstorm> Do note i have disabled my Wireless in the GUI here
[22:09] <bekks> Coldfusionstorm: So pastebin "lspci -k" please, too.
[22:10] <Coldfusionstorm> Here you go bekks http://pastebin.com/jd2ads5N
[22:11] <bekks> Coldfusionstorm: When the connection is being dropped - do you see any error messages in "dmesg"?
[22:12] <Coldfusionstorm> well, The symtyps are Skype drops call every few minutes
[22:12] <Coldfusionstorm> Webpages stops loading
[22:12] <Coldfusionstorm> and steam slows
[22:12] <bekks> Coldfusionstorm: When the connection is being dropped - do you see any error messages in "dmesg"?
[22:12] <Coldfusionstorm> what is dmesg?
[22:13] <aeon-ltd> Coldfusionstorm: application, type that in a terminal
[22:13] <bekks> Coldfusionstorm: dmesg is a program to display the debug messages in the kernel ring buffer.
[22:13] <mike123> can anyone tell me how to open ports for transmission?
[22:13] <Coldfusionstorm> Cool
[22:13] <Coldfusionstorm> alright so, i don't know if it did that
[22:14] <bekks> Coldfusionstorm: That would be important to know, since it will help diagnosing the issue.
[22:14] <mike123> my windows computer will download at 3 and 4mbps but my new ubuntu will only download at around 40kbps every port i have tried says closed
[22:14] <Coldfusionstorm> il start steam
[22:14] <solsTiCe> mike123: so you are using a firewall on ubuntu ?
[22:14] <Coldfusionstorm> and see if i can replicate the bahavior
[22:15] <mike123> solsTiCe not by choice. i just installed yesterday and im not that familiar. i didnt set one up though
[22:16] <solsTiCe> mike123: so did you check use upnp for my router intransmission preferences
[22:16] <mike123> solsTiCe yes i did
[22:17] <solsTiCe> how did you check they are closed ?
[22:17] <mike123> solsTiCe: the test port button
[22:18] <Angelo_> ciao
[22:18] <Coldfusionstorm> Im still here bekks , im just waiting for steam to remove files
[22:18] <Coldfusionstorm> i did a copy operation the other day and did not get a chance to reintialise all the games
[22:19] <mike123> solsTiCe, i also tried changing the port and tried about 20 different ones. all said closed
[22:19] <solsTiCe> mike123: did you check that the port are forwarded/natted on the rotuer ?
[22:19] <Coldfusionstorm> well, it seems stable now
[22:20] <Coldfusionstorm> 2,5MB/s
[22:20] <solsTiCe> mike123: it could be the torrent anyway
[22:20] <Coldfusionstorm> but as soon as i booted into windows ealier the symptoms went away and everything worked
[22:21] <drewbert> I'm still kinda struggling with this, and google is not being helpful.  When I try play, aplay, mpg123, and beep I get no sound playing, but I'm listening to music right now from a flash video.
[22:21] <mike123> solsTiCe, they are indeed. like i said everything else works flawlessly just the ubuntu machine. and its multiple torrents. 9 tried to be exact. and two of which will download at 4mbps on the windows machine. (same torrent) but only 40kbps on the ubuntu
[22:24] <Coldfusionstorm> btw, Bekks, when running dmesg it just outputs what have happend
[22:24] <Coldfusionstorm> it does not run like top would do
[22:24] <solsTiCe> mike123: paste output of "iptables -L"
[22:24] <kqiraP> hello everyone, could you please correct me if I am wrong? the 'Dejavu Sans Light' font is preinstalled on ubuntu, right?
[22:25] <SCHAAP137> i believe so kqiraP
[22:25] <mike123> solsTiCe, mike123@Ellis-Server:~$ iptables -L
[22:25] <mike123> modprobe: ERROR: could not insert 'ip_tables': Operation not permitted
[22:25] <mike123> iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
[22:25] <mike123> Perhaps iptables or your kernel needs to be upgraded.
[22:25] <solsTiCe> mike123: sorry "sudo iptables -L"
[22:25] <mo1ok__> im bored an theres serveral feet of snow on the ground. what are some fun things i can do with linux?
[22:26] <solsTiCe> mike123: and not here but on a pastebin
[22:26] <mike123> solsTiCe, how do i do a pastebin?
[22:26] <mike123> solsTiCe, im fairly new
[22:27] <jakesyl_mobile> anyway to do like run script python example.py if python example.py not already running?
[22:28] <solsTiCe> mike123: "sudo apt-get install pastebinit && sudo iptables -L|pastebinit"
[22:28] <mike123> solsTiCe, http://pastebin.com/8uqfxtsf
[22:29] <game0> I wana install a simple linux server
[22:29] <mike123> sudo apt-get install pastebinit
[22:30] <game0> have anyone tried to install ubuntu server, and work with it
[22:30] <game0> ?
[22:30] <solsTiCe> mike123: I don't know what's wrong
[22:30] <k1l> game0: a lot did. so what is the issue?
[22:30] <game0> cause all I see is that it's not having UI
[22:30] <MrJerome> How can I set a keyboard shortcut (shift-ctrl-alt-t) to open a byobu terminal?
[22:30] <game0> I wana try to install web application on that server
[22:30] <mike123> solsTiCe, so no ideas?
[22:31] <b-p> help me pls. how can i set to not log 'sql plugin' lines to auth.log: http://pastebin.com/KiktwCJ6
[22:31] <k1l> game0: servers dont have a GUI. that is because the run down in the basement without any monitor, the most time
[22:31] <k1l> game0: so use the terminal. maybe over ssh.
[22:31] <game0> I have a desktop on my home
[22:32] <k1l> game0: yes, that is a desktop. you can run the server programs, too. but for real webservers you dont want a running desktop to take away all the cpu and ram.
[22:33] <drewbert> I figured it out finally.  Just had to fiddle with the default sound device.
[22:33] <game0> I have to, cause the program needs at least 4giga of ram
[22:33] <game0> to run
[22:33] <k1l> game0: so what do you want to do?
[22:34] <game0> I'm confused a l want to test the application but my problem is that ubuntu server isn't having a UI
[22:34] <game0> and I wana install the application it's .bin
[22:35] <k1l> game0: servers dont have a gui
[22:35] <k1l> game0: you use the CLI
[22:35] <game0> what's CLI
[22:35] <k1l> comand line interface. "terminal"
[22:36] <game0> OK, is it the same as the user ubuntu version
[22:36] <k1l> game0: the server install is basically a ubuntu base system without a desktop.
[22:37] <k1l> game0: so what is the issue? that you cant install something using the terminal?
[22:37] <OerHeks> game0, so does that .bin application come with a manual?
[22:37] <_DB> sup
[22:37] <game0> I have to install it from the website
[22:37] <_DB> im having a problem with ubuntu and my asus laptop
[22:37] <game0> and then run it in the server
[22:38] <_DB> its not letting me enter the root of my HDD
[22:38] <k1l> game0: that is not a problem. use wget to get it
[22:38] <_DB> alos its not picking up my mouse clicks -_-
[22:38] <game0> OK, I will try tomorrow to install ubuntu server on my desktop and see how it's going to work
[22:38] <drewbert> Is there a way I can configure my shell to play a sound when any long running command finished?
[22:39] <SCHAAP137> drewbert, theoretically yes, but you'd have to build it yourself
[22:40] <aeon-ltd> SCHAAP137: that answer applies to nearly everything
[22:40] <SCHAAP137> aeon-ltd, hmm, you're right
[22:40] <EriC^^> drewbert: if you have mplayer installed you can just ; mplayer /path/to/soundfile
[22:41] <game0> thanks k1l nad OerHeks
[22:41] <drewbert> but what if I forget to do that, usually it's hard to tell if a command is long running until it is run.  I'm looking for something that will bring me back from the ADD tangents I go on.
[22:42] <EriC^^> drewbert: write a script that checks a given pid you give it, and once the pid is gone it plays the sound
[22:42] <drewbert> EriC^^: hrmm, that sounds closer to a viable approad.
[22:43] <drewbert> errr, approach
[22:43] <dansmith_btc> poilop, no
[22:43] <kqiraP> SCHAAP137, are preinstalled fonts on OSes not expected to look the same when they are used for a website text?
[22:43] <kqiraP> I mean look the same through different browsers and OSes
[22:44] <SCHAAP137> kqiraP, that depends on the way the particular browser renders the font, and also any font smoothing/rendering from the OS
[22:44] <SCHAAP137> but generally, yes, i think they _should_ look the same, that is the goal obviously
[22:45] <MrJerome> How can I set a keyboard shortcut (shift-ctrl-alt-t) to open a byobu terminal?
[22:47] <SCHAAP137> MrJerome, what desktop environment are you using?
[22:47] <MrJerome> ubuntu
[22:48] <SCHAAP137> just regular ubuntu, ok
[22:48] <MrJerome> unity
[22:48] <drewbert> EriC^^: could I use the debug trap and prompt command to store times when commands start and finish, then check the difference and play a sound?
[22:48] <drewbert> * I am using bash.
[22:49] <Ben64> long command; mplayer /path/to/annoying.mp3
[22:49] <OerHeks> MrJerome, sudo update-alternatives --config x-terminal-emulator
[22:49] <EriC^^> Ben64: i suggested that, he wants it to do so if he forgets to add mplayer
[22:50] <Ben64> oh
[22:50] <jfb_> just setting up icinga / nagios. I'm getting a Disk Space critical error on a remote server (using a nrpe agent) that is actually the error from my localhost (both are displayed). why?
[22:50] <EriC^^> drewbert: the pid is very easy
[22:50] <EriC^^> drewbert: it's just one line
[22:51] <_DB> how do i mount a HDD ?
[22:51] <EriC^^> while true; do if [ ! pgrep <long command> ]; then mplayer /path/to/soundfile; fi; done
[22:51] <EriC^^> drewbert: something like that ^^
[22:52] <_DB> its picking it up but I cant go into its root currently
[22:52] <SCHAAP137> MrJerome, Go to System Settings → Keyboard, select Shortcuts tab and add a new custom shortcut
[22:54] <_DB> hmm nvm its mounted I dont have the permissions to view the files
[22:54] <_DB> anyway to change that?
[22:54] <_DB> (i remember i had to bring up the terminal and run a command to grant access not sure which one though)
[22:55] <SCHAAP137> a general must read for anyone: http://www.catb.org/esr/faqs/smart-questions.html
[22:55] <MrJerome> SCHAAP137: I've tried that but I don't know what command to use to launch it. I've tried /usr/bin/byobu and byobu
[22:55] <kirkland> MrJerome: you're going to need to launch a terminal (like gnome-terminal) and have it run /usr/bin/byobu
[22:56] <SCHAAP137> MrJerome, go in your terminal and type: whereis byobu
[22:56] <SCHAAP137> it will show you where the executable is
[22:57] <OerHeks> does byobu not show up in sudo update-alternatives --config x-terminal-emulator ?
[22:58] <kirkland> byobu has to run inside of a terminal (Hi, I'm the author of Byobu, btw)
[22:58] <MrJerome> kirkland: i currently have it set to run byobu instead of my normal shell but I want to be able to use ctrl-alt-t for a regular gnome-terminal
[22:58] <MrJerome> kirkland: and ctrl-shift-alt-t for byobu
[22:58] <kirkland> MrJerome: you can set gnome-terminal to automatically run byobu by default
[22:59] <MrJerome> kirkland: awesome I just started using it a week ago
[22:59] <spitzi> OerHeks: thanks
[22:59] <MrJerome> kirkland: yes that's how I have it configured right now, but sometimes I just want a normal gnome-terminal session to be launched with ctrl-alt-t so I want a separate shortcut for byobu
[22:59] <SCHAAP137> cool, i'm not familiar with byobu, lemme search
[22:59] <kirkland> MrJerome: Edit -> Profile Preferences -> Title and Command -> Run a custom command -> /usr/bin/byobu
[23:00] <spitzi> Thanks and bye
[23:00] <kirkland> MrJerome: ah, okay
[23:00] <loley> newbie
[23:01] <loley> anyone here?
[23:01] <EriC^^> MrJerome: you could set a shortcut in shortcuts that opens gnome-terminal -e /usr/bin/byobu
[23:01] <EriC^^> and remove the profile preference
[23:02] <loley> do I have to 'Install Ubuntu" if I plan on booting from a thumb drive? It doesn't seem necessary
[23:02] <EriC^^> loley: just to use a live session?
[23:02] <SCHAAP137> loley, it's a live session, you can try it and use it without having to install
[23:02] <loley> to use the gui/op sys
[23:03] <loley> I'm using it now... without installing
[23:03] <loley> what does it gain me?
[23:03] <SCHAAP137> installing would replace the operating system currently on your hard drive
[23:03] <MrJerome> EriC^^: Thank you! that is exactly what I was looking for
[23:03] <EriC^^> MrJerome: no problem
[23:03] <loley> that's what I thought... and though I don't plan on using it any more... I don't necessarily want it nuked
[23:04] <k1l_> loley: with a install to a disk/ssd you get better performance and more changes to install packages
[23:04] <MrJerome> kirkland: awesome work with byobu thanks
[23:05] <claudio> ciao a tutti
[23:05] <claudio> ciao a tutti
[23:05] <k1l_> !it | claudio
[23:05] <claudio> !list
[23:05] <loley> I got an old laptop... I'm afraid if I install over the existing data, I might lose something I might want later (specifically the Office version)
[23:06] <k1l_> loley: if you install over the old install you will loose data. what is installed there?
[23:07] <loley> I can back up the docs and photos and crap... but the licensed ver of Office I can't
[23:09] <linusfargo> does anyone know if you can still use google voice with yate? I cant seem to get my setup to work anymore, but I keep finding conflicting information about its status.
[23:10] <acz32> those of you who use wine, what's your favorite frontend?
[23:10] <k1l_> loley: you can use libreoffice
[23:11] <loley> I intend to...
[23:11] <linusfargo> play on linux is the best wine front end
[23:12] <drewbert> I figured it out.  trap 'last_command_time=$command_time; command_time=`date +%s`;' DEBUG   and then command_time_difference=$(expr `date +%s` -  $last_command_time); if [ $command_time_difference -gt 10 ] ; then play_sound ; fi
[23:12] <acz32> i don't need it for games though
[23:12] <acz32> is playonlinux best for apps, too?
[23:12] <drewbert> second part needs to be assigned to PROMPT_COMMAND
[23:12] <kqiraP> hello again, I found out that some fonts are not preinstalled on libreoffice or ubuntu. the texts on a web page that are originally done with these fonts do look different in this case when they are not preinstalled on OS. even though the browser is set to 'allow websites to show their own fonts'..how then  can web pages ever look the same everywhere?
[23:12] <drewbert> probably best to stick 'em in your bashrc
[23:17] <linusfargo> yes play on linux is great for all windows programs on wine
[23:18] <aum> hi - across a wide crop of ubuntu and debian servers, what's the simplest way to determine how much free space is available in whatever partition includes /tmp ?
[23:18] <linusfargo> play on linux lets to sandbox all apps, or launch them with preservable configurations
[23:18] <k1l_> aum: df -h
[23:19] <linusfargo> shit beat me to it
[23:19] <linusfargo> i was thinking of something snarky to but before df
[23:20] <aum> k1l_, the problem being that different servers have different arrangements for /tmp - some have /tmp in its own partition, others have /tmp symlinked to another partition, others just have root partition -
[23:20] <aum> ok - my bad - giving /tmp as arg reveals all
[23:21] <acz32> linusfargo: playonlinux lets you create and manage wineprefixes?
[23:21] <lazl0w> What do I need to do to install a .tar package to Ubuntu? I have already tar -xvf'd it
[23:22] <lazl0w> nvm
[23:22] <lazl0w> them .deb files
[23:22] <linusfargo> not sure about prefixes but id think yes, there are so many possible settings I dont remember them all sorry
[23:23] <acz32> no problem
[23:32] <hardtail> is there a way on OS X to create a bootable USB without the DD command?
[23:33] <SCHAAP137> Disk Utility?
[23:33] <Elimin8er> Stupid Queston but im going to ask anyhow, Is it possible to take out my system drive and install it in another system that pretty much uses the same chipset as the system that its currentlly on? only diffrents is still amd ATI gfx, but diffrent serries.. Did get black screen on boot. ? So is it possible or would be not good ?
[23:33] <k1l_> hardtail: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-mac-osx
[23:34] <SCHAAP137> Elimin8er, yes that should generally be possible
[23:35] <SCHAAP137> there are a few issues you could run into
[23:35] <hardtail> SCHAAP137 I can format with disk utility and then just drag the iso?
[23:35] <mcphail> Elimin8er: I do that sort of thing a lot. Usually not a problem. Have you been using open source or proprietary graphics drivers?
[23:35] <Elimin8er> schaap137, THe only thing I did run into was black screen.. the screen shut it self off.. thats why I asked about the gfx card drivers? would I just be able to log into remote and instal the correct drivers?
[23:36] <SCHAAP137> not sure hardtail, but you could use this, its for OSX as well: http://unetbootin.sourceforge.net/
[23:36] <k1l_> hardtail: did you see my link?
[23:36] <SCHAAP137> specifically made to create linux bootable USBs
[23:36] <Elimin8er> mcphail, I used what ever came with ubuntu
[23:36] <hardtail> k1l_ yes thanks, that's what I was following but I have had trouble with the 'dd' command, it seems to time out
[23:37] <SCHAAP137> Elimin8er, it might as well be the screen resolution
[23:37] <SCHAAP137> you can try to switch to a different terminal, and reinstall the drivers from the console
[23:37] <mcphail> Elimin8er: what resolution is your screen?
[23:37] <SCHAAP137> ctrl alt F2 at the black screen
[23:38] <Elimin8er> schaap137, and mcphail, Not sure screen size, this system is 15.6 screen while my other is 17
[23:38] <Elimin8er> il just log on with another terminal and reinstall drivers to switch for the new sizes and screens
[23:39] <Elimin8er> schaap137, Thank you for your help...
[23:39] <SCHAAP137> ultimate test would be to switch the screens temporarily as well, then u know whether the resolution is the issue
[23:39] <Elimin8er> mcphail, thank you for your help also
[23:39] <SCHAAP137> cool, yw
[23:39] <Elimin8er> schaap137, it turned my screen all the way off
[23:40] <Elimin8er> I mean blinked off.. like sleep
[23:40] <Elimin8er> apon the booting
[23:40] <mcphail> Elimin8er: no prob. Your issue is likely to be kernel modesetting not detecting your resolution properly. May need a bit of tweaking
[23:40] <Elimin8er> when it loaded the drivers im sure
[23:40] <SCHAAP137> yeah i think so too
[23:40] <Elimin8er> ok il try again in a bit.. thank you for all your help
[23:41] <mcphail> Elimin8er: a tremporary workaround is to add "nomodeset" to your boot options but it will leave you with an awful low-res vesa driver
[23:41] <Elimin8er> mcphail, ill try the reinstall drivers for the new screen set gfx card
[23:41] <Elimin8er> both are amd ati's just diffrent serries
[23:41] <mcphail> Elimin8er: good luck
[23:42] <Elimin8er> again.. thank you both........... ill try in a bit.
[23:43]  * mcphail uses the boot option "drm_kms_helper.edid_firmware=edid/1920x1080.bin" to get rid of the black screen
[23:45] <Elimin8er> mcphail, How would I add that
[23:46] <mcphail> Elimin8er: at the bootloader, press "e" to edit the boot commands and add it between "quiet" and "splash". This will only work if the 1920x1080 resolution is supported by your monitor
[23:47] <mcphail> Elimin8er: other built-in ones are 1024x768, 1280x1024, 1680x1050 and maybe 1600x1200. If your monitor doesn't support these the process is more difficult
[23:48] <SCHAAP137> 1024x768 should be a fairly secure choice
[23:48] <SCHAAP137> given the physical screen size
[23:49] <Elimin8er> ok thanks
[23:51] <mcphail> actually, 800x600 seems to be an option in modern kernels as well
[23:52] <bipul> I am not able to download anythings from email, my ubuntu terminal is almost blurish.
[23:52] <janmsistooschr> How can 12.10 be upgraded?
[23:52] <k1l_> !eolupgrade | janmsistooschr
[23:53] <Elimin8er> i just hope something works. I dont wanna reinstall my whole linux system again.. way tomany things to reinstall and backup
[23:53] <k1l_> janmsistooschr: you need to upgrade to 13.04, then 13.10 and then 14.04. maybe a fresh install of 14.04 is faster
[23:54] <DSdavidDS> question: why is eclipse will version 3.8 on ubuntu?
[23:54] <k1l_> !info eclipse
[23:54] <mcphail> Elimin8er: it should work. If all else fails, boot once with "nomodeset" and install the proprietary drivers. However, I like the open source radeon drivers better
[23:54] <k1l_> 14.10 got eclipse 3.8.1
[23:55] <bipul> My gnome has different looks, even i am not able to read anythings on my terminal.
[23:55] <DSdavidDS> Yeah, but my question is why it isn't using version 4.4 as the latest release?
[23:55] <Tinche> DSdavidDS, the simple answer is because no one has packaged it
[23:56] <k1l_> DSdavidDS: sorry but your questions dont make sense. can you rephrase it?
[23:56] <DSdavidDS> The latest version of Eclipse is 4.4. The latest eclipse package in Ubuntu repo is 3.8.
[23:57] <DSdavidDS> Why haven't they updated to 4.4 (or even 4.3) yet?
[23:57] <Tinche> I don't know but it's probably not that simple
[23:57] <Tinche> however, you can use ubuntu make to install the newest Eclipse
[23:57] <Pici> iirc, it hasn't been packaged for debian either.
[23:58] <k1l_> see https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/1019273
[23:58] <DSdavidDS> Okay, actually I just did a quick google search on it (as I should have) http://stackoverflow.com/questions/19792909/why-does-ubuntu-14-04-stick-with-old-eclipse-3-8-when-4-3-is-out
[23:58] <Tinche> here, add this ppa: https://launchpad.net/~ubuntu-desktop/+archive/ubuntu/ubuntu-make
[23:59] <Tinche> then install ubuntu make (sudo apt-get install ubuntu-make)
[23:59] <Tinche> then you can use ubuntu make to install the newest Eclipse and a bunch of other dev tools