/srv/irclogs.ubuntu.com/2015/04/06/#ubuntu-server.txt

ircfoxhow do I change the default ssh port 22 to another?01:51
=== zz_DenBeiren is now known as DenBeiren
=== markthomas|away is now known as markthomas
=== markthomas is now known as markthomas|away
verdePedit the config file in /etc06:32
verdePi dont see the point though06:33
verdePthen restart the service of course06:35
=== zz_DenBeiren is now known as DenBeiren
lordievaderGood morning.08:34
=== Lcawte|Away is now known as Lcawte
strikovrbasak: \o/12:39
=== lp|away is now known as lazyPower
=== Pici` is now known as Guest51728
=== Sramelyor3301 is now known as Guest36793
=== Guest51728 is now known as pici
=== pici is now known as Pici
=== cmagina_ is now known as cmagina
=== adam_g_out is now known as adam_g
chancedI'm setting up a home server for a file server and a dev box but I'm stumped with whether or not my DD-WRT should be the one to handle DNS / DHCP or if it should act as a pass-through to the server.16:54
tewardchanced: dd-wrt is your router that controls data flow to the internet and such?17:04
chancedteward: yea17:04
tewardchanced: and this isn't behind a NAT interface in a VM, it's on an actual server connected to said router?17:04
chancedbaremetal to said router17:05
tewardit should be handling the DHCP then, unless you set static IP.  as for DNS, either the router can forward it out to the net or you can just let the data pass right outside, although if the server is going to be web facing i'd be careful letting it just pass right out to the net17:05
tewardif it's staying behind NAT/port forwarding then whether it reaches out for DNS to servers its set for or if it goes via your router, not sure if it matters17:06
chancedit does, thanks17:06
tewardit does what, web facing, or...?17:07
chancedmatters17:08
chancedi hadn't considered the concerns there; i was tempted to expose a number of the services but I'm second guessing that17:08
tewardmmm17:08
=== _thumper_ is now known as thumper
=== bilde2910 is now known as bilde2910|away
beanbagI have a bdr solution from datto that uses a ubuntu 10.04 image but uses a 3.0.0 kernel22:44
beanbaglsi has a sas driver for 3.0.0 kernel but it's for ubuntu 1122:44
beanbagany reason it wouldn't work22:44
sarnoldbeanbag: man, both ubuntu 11.04 and 11.10 have been unsupported for ages; is there any reason why you can't run ubuntu 12.04 LTS or 14.04 LTS?22:46
beanbagyes22:46
beanbagbecause that's what datto is using for their backup device os installer22:46
beanbagim trying to get the lsi kernel module installed on the installer usb stick and when I try to insmod the .ko file I get invaLID MOdule22:47
beanbagI wasn't sure if you needed something more than kernel version to match22:47
sarnoldmodules need to be compiled for the exact kernel configuration / sources used; there's some slight amount of "fuzz" to it, but it's insanely picky. your best bets are either (a) compile the module yourself against the kernel you want to use (b) use the exact kernel that they used when they compiled the module..22:48
sarnoldnote that ubuntu 10.04 will no longer be supported in a few weeks; it EOLs very soon..22:49
beanbagI think once the system is installed they update with a newer image22:50
beanbagI know how old and outdated it is22:50
beanbagI guess you can't modprobe .ko files22:51
sarnoldinsmod22:51
beanbagso I can't test before I load the initrd22:51
beanbaginsmod22:51
beanbagI mean22:51
beanbagI tried on the defgault one and still got invalid module format22:51
beanbagso that's not the issue22:51
beanbagnm it is the issue22:54
beanbaghmm22:54
beanbaglooks like the installer has a full os on it that can compile22:54
_1_Dre2yow23:09
=== Lcawte is now known as Lcawte|Away
=== NomadJim_ is now known as Nomadjim
=== Nomadjim is now known as NomadJim

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!