[00:07] <rex_> I REMEMBER MY PASS BUT IT DOESNT LOGIN
[00:07] <rex_> fkk
[00:08] <petrvs> rex_: maybe caps was on?
[00:08] <petrvs> or is now
[00:08] <rex_> god curse me
[00:08] <rex_> haha i remember
[00:08] <rex_> i hate memory
[00:08] <rex_> once i forget i cant remind
[00:09] <petrvs> that is the trick with forgetting, isn't it
[00:09] <rex_> need to setup ssh server
[00:10] <rex_> but i cant get root
[00:10] <rex_> wtf
[00:11] <k2gremlin> could anyone help me with IP tables. I am trying to get a port open on my server. Testing from ping.eu and its still closed. Port is 37777 and I am trying to allow it to connect to 192.168.2.58. Here is my current IP tables. http://pastebin.com/B3qbeFtb
[00:12] <rex_> but i cant get root :(
[00:12] <rex_> it took awhile to install server
[00:12] <petrvs> k2gremlin: #netfilter
[00:13] <petrvs> rex_: if you have an ordinary live OS you can boot and not run an installer from, you can fix root from it
[00:13] <k2gremlin> petrvs, thanks
[00:13] <Bashing-om> !root | rex_
[00:13] <rex_>  i hate ubuntu server its stupid menu
[00:13] <petrvs> heh
[00:14] <rex_> i just wanted intel synatx in gdb ;(
[00:14] <rex_> no sudoers file. This incident will be reported
[00:14] <rebs> hey how can i enable autologin in 14.04. i dont see any toggle switches in user account settings
[00:14] <Johnny_Linux> D`oh!
[00:15] <rex_> please
[00:16] <rex_> so much bots lmao
[00:16] <blee> petrvs: any ideas?
[00:16] <rex_> no
[00:17] <blee> petrvs: to make it simple, lets just say 2 interfaces, "br1" and "bond0", how do i make resolvconf use one over the other?
[00:20] <petrvs> blee: oh sorry I'm not sure, might ask #linux
[00:21] <rex_> please help
[00:23] <anton02> when are you guys gonna get a bigger beard? http://i.4cdn.org/g/1429706823914.jpg
[00:24] <petrvs> anton02: ha
[00:24] <petrvs> anton02: what's that from?
[00:24] <Bashing-om> rex_: What command are you trying to execute, and what is your end goal ?
[00:24] <Guest10283> q
[00:24] <anton02> petrvs, not sure
[00:24] <rex_> setup openssh, I need root
[00:24] <hybridpollo> blee:  look at  resolvconf man page on section: interface ordering
[00:25] <cxdvty> some help me
[00:25] <faultyjohn> q
[00:25] <Jordan_U> !ot | anton02 petrvs
[00:25] <cxdvty> How can I install ubuntu 15.04 to a drive partition that currently has a different os on it
[00:25] <blee> hybridpollo: i read it, and configured everything in network/interfaces file using dns-nameserver, but resolvconf -u doesnt update
[00:25] <pavlos> blee, per resolvconf page, the -a <interface> flag uses that interface
[00:26] <faultyjohn> do you want to overwrite it or partition?
[00:26] <blee> pavlos: it just freezes if i do resolvconf -a lo
[00:26] <petrvs> too bad
[00:26] <cxdvty> I want to completely replace the os on that partition with ubuntu 15.04
[00:26] <faultyjohn> liveboot
[00:26] <cxdvty> im dualbooted with ubuntu 14.10 and kubuntu 15.04 right now
[00:26] <faultyjohn> choose install ubuntu
[00:27] <cxdvty> ubuntu 14.120 wont boot so I want to replace it
[00:27] <faultyjohn> then choose erase entire disk and install ubuntu
[00:27] <cxdvty> I still want to be dualbooted
[00:27] <cxdvty> Unless there is no other way
[00:28] <faultyjohn> ok
[00:28] <faultyjohn> shrink the partition
[00:29] <faultyjohn> with gparted
[00:29] <cxdvty> Or can I just repartition the drive to only have kubuntu on it?
[00:29] <cxdvty> faultyjohn... How do I do that
[00:29] <faultyjohn> stop cinfusing me
[00:29] <faultyjohn> confusing*
[00:29] <faultyjohn> ok
[00:29] <cxdvty> Do you know how to do that
[00:29] <faultyjohn> how is the drive currently partioned?
[00:29] <cxdvty> That's my final decision
[00:29] <cxdvty> Its split equally between ubuntu and kubuntu
[00:30] <blee> i used the resolvconf --wipe-runtime-directories and now its gone
[00:30] <blee> resolv.conf is gone
[00:30] <faultyjohn> how do you want it partitioned?
[00:32] <deadmund> faultyjohn: cxdvty You said originally you want to completely replace the existing os and install only ubuntu 15.04 (that is possible and probably the easiest)
[00:32] <cxdvty> faultyjohn: I want everything erased and I want kubuntu to have the drive to itself
[00:33] <cxdvty> deadmund: I just realized I lost my usb lol
[00:33] <faultyjohn> do you have gparted?
[00:33] <cxdvty> Yes I have Gparted
[00:33] <cxdvty> Im on kubuntu right now
[00:33] <cxdvty> I want to keep only kubuntu and erase everythin else I want one single partition with kubuntu on it
[00:33] <faultyjohn> can you delete ubuntu from gparted?
[00:34] <cxdvty> I don't know
[00:34] <cxdvty> ObrienDave are you here
[00:34] <cxdvty> deadmund: do you know what I am talking about?
[00:34] <deadmund> cxdvty: faultyjohn You can't edit partitions that are mounted and you cannot unmount the / (root) partition.  So you'll need to use some USB with some OS (perferbly linux) to repartition the drive.  Then you'll need to update grub.  Also, you need to be careful not to delete your personal data (like documents music, etc)
[00:35] <deadmund> cxdvty: I think I know what you're talking about.  But I'm not 100% sure.
[00:35] <faultyjohn> ok
[00:35] <faultyjohn> do you have a live cd/usb cxdvty?
[00:36] <rex____> guys watch out
[00:36]  * deadmund ducks
[00:36] <rex____> I didn't create normal user what does it mean? will be a sudo permanent?
[00:36] <cxdvty_> deadmund: I disconnected. But what do I do?
[00:37] <faultyjohn> do you have a live cd/usb
[00:37] <deadmund> cxdvty: You "disconnected" ??
[00:37] <deadmund> cxdvty: I don't know what that means.
[00:37] <deadmund> cxdvty: as faultyjohn asks: do you have a live cd/usb you can boot?
[00:38] <cxdvty_> deadmund I'm searching for a usb but no i dont have one made for ubuntu yet
[00:38] <deadmund> cxdvty: You will need some live cd / usb running some os (preferbly linux) to repartition your drive.
[00:39] <cxdvty_> Why preferbly linux?
[00:39] <faultyjohn> the live version of ubuntu comes with gparted built in
[00:39] <cxdvty_> Is anyone running ubuntu 15.04
[00:39] <faultyjohn> windows doesn't mak live boots
[00:39] <faultyjohn> *make
[00:39] <cxdvty_> Is it worth using anyways
[00:40] <faultyjohn> what is
[00:40] <faultyjohn> ubuntu?
[00:40] <cxdvty_> 15.04
[00:40] <cxdvty_> ya
[00:40] <deadmund> cxdvty_: It's easier for us to isntruct you with linux and I know it will work.
[00:40] <cxdvty_> Linux always messed up on me and froze all of the time
[00:40] <deadmund> cxdvty_: It's probably not much different unless you're running KDE or a cloud sever with virtual machines
[00:41] <cxdvty_> I develop android roms
[00:41] <cxdvty_> Whats best for me
[00:41] <Goose_> How easy is it to switch to kubuntu? Can I just switch from the normal ubuntu distro to kubuntu without re-installing everything?
[00:41] <tsukasa_> is there something screwy going on with the apt mirrors right now?
[00:41] <tsukasa_> i'm getting a hash mismatch on a mirror
[00:42] <faultyjohn> what is the difference between ubuntu and kubuntu
[00:42] <cxdvty_> faultyjohn: kubuntu plasma 5 is steezy looking and has cool animations and what not
[00:43] <deadmund> Goose_: yes, just install this: kubuntu-desktop
[00:43] <deadmund> cxdvty_: "steezy" is good in your opinion?  or bad?
[00:43] <cxdvty_> good :)
[00:43] <deadmund> faultyjohn: The difference is just what packages are installed by default.
[00:43] <deadmund> faultyjohn: kubuntu has kde installed, ubuntu has unity installed by default.
[00:43] <Goose_> deadmund, can I just switch back with no issue?
[00:44] <faultyjohn> hmm
[00:44] <deadmund> Goose_: You can install both desktop environments (DE's) unity and KDE and then choose which to use when you log in.  By installing kubuntu-desktop you are setting this up.
[00:44] <faultyjohn> and whats the difference between kde and unity
[00:44] <cxdvty_> There are also lots of other ones (lubuntu,xubuntu, etc...)
[00:44] <faultyjohn> I sound like an idiot
[00:44] <deadmund> Goose_: If you want to remove it (KDE) it's very easy: sudo apt-get purge kubuntu-desktop.
[00:44] <cxdvty_> Just the look and feel basically
[00:44] <cxdvty_> faultyjohn ^^
[00:44] <faultyjohn> oh ok
[00:45] <cxdvty_> How is ubuntu 15.04?
[00:45] <deadmund> faultyjohn: They're two different "desktop environments" search on youtube for kde4 or kde5 (the new version in ubuntu 15.04) and search for unity and you will see the difference instantly.  It's basically the interface of the OS itself.
[00:45] <Goose_> Cool. I know there are many versions but I just saw how great kubuntu looks now and wanted to finally try another one
[00:45] <Goose_> THanks so much!
[00:45] <deadmund> cxdvty_: I don't know how 15.04 is yet, I haven't used it :(
[00:45] <faultyjohn> like gnome for debian?
[00:46] <deadmund> Goose_: Yeah, kubuntu is rocking the all new plasma 5 which is awesome
[00:46] <Goose_> I've downloaded 4 versions and not even touched it
[00:46] <Goose_> Sweet! Can't wait to try
[00:46] <deadmund> faultyjohn: gnome is another DE, (for debian is irrelavent any distro can run any DE)
[00:46] <cxdvty_> deadmund: definately check out kubuntu 15.04 if you can!'
[00:46] <deadmund> cxdvty_: That's for the recommendation :P
[00:46] <faultyjohn> I looked at screenshots
[00:47] <faultyjohn> it all makes sense now
[00:47] <cxdvty_> faultyjohn: deadmund: Are you guys familiar with kitkat and lollipop on android?
[00:47] <deadmund> cxdvty_: yes, very.  Why?
[00:47] <deadmund> faultyjohn: yeah :_
[00:47] <faultyjohn> sorry iDevice user
[00:47] <faultyjohn> not by choice
[00:50] <psyrus> a
[00:50] <thiebaude> :)
[00:50] <cxdvty_> deadmund: switching from ubuntu to kubuntu 15.04 is like going to lollipop from kitkat
[00:50] <netameta> How can i make a certain script execute and bind it to launch button ?
[00:51] <thiebaude> 15.10 is looking good for me painless upgrade from 14.10
[00:52] <cxdvty_> deadmund: What distro is better for android developers but still fast and neat looking
[00:53] <deadmund> cxdvty_: I think ubuntu in general is probably the best distro becuase Google mentions it many times in their Android documentation (like setting up the environment).  I don't think there is any difference  though for android dev between kbuntu, ubuntu, xubuntu, etc
[00:53] <deadmund> netameta: do you know how to create a script?
[00:53] <deadmund> netameta: What DE are you using?
[00:56] <netameta> How can i make a certain script execute and bind it to launch button ?
[00:58] <Goose_> So when I install kubuntu, can I switch between KDE and Unity?
[00:58] <rex____> Yes
[00:58] <rex____> How can I install network interface or network
[00:59] <kostkon> Goose_, to get unity install ubuntu-desktop
[00:59] <rex____> im in terminal
[01:00] <Goose_> So what happens to the existing desktop when I install a new one?
[01:00] <kostkon> Goose_, not really sure what login manager you'll need after that though or what will happen to your login manager
[01:00] <Goose_> What does kubuntu use?
[01:00] <kostkon> Goose_, you should be able to select the DE of your choice from your login manager
[01:00] <Goose_> cool
[01:00] <kostkon> Goose_, good question, I don't know
[01:00] <Goose_> I just wanna see how kubuntu feels compared ot unity
[01:01] <Goose_> looks awesome
[01:04] <Fr3d3r1c> how do i do to force gmail to accept a mail from roundcube
[01:05] <Douglas> anybody  here
[01:06] <Fr3d3r1c> yes me :D
[01:06] <Douglas> ""
[01:06] <Douglas> only testing
[01:09] <rex____> please help
[01:09] <rex____> i cant mount the cd...
[01:09] <rex____> http://askubuntu.com/questions/386265/media-change-please-insert-the-disc-labeled-when-trying-to-install-ruby-on-ra i did that
[01:11] <maku_> Did anyone else lose sound in headphone jack of their laptop after upgrading to 15.04?
[01:12] <rex____> yes :(
[01:12] <rex____> This is so sad when I get ignored
[01:13] <penos> 14.04 LTS has no scummvm
[01:13] <windows> hi
[01:13] <penos> :(
[01:13] <penos> hi windows
[01:14] <windows> im doing the upgrade
[01:14] <windows> hi pen
[01:15] <windows> is 15.04 lts?
[01:15] <rex____> Please help
[01:17] <popey> windows: no
[01:17] <windows> ok thx
[01:18] <rex____> !ops
[01:18] <rodney77> hello, I corrupted an sd card after not unmounting cleanly. I reformatted the card. I can write to it using mkdir in cli, but I can't make a folder in nautilius
[01:18] <rodney77> nautilus claims the system is read-only
[01:18] <rodney77> even though I can mkdir as my normal user (not root). any ideas?
[01:20] <elky> rex____: what's the emergency?
[01:20] <rex____> i cant install ethtool
[01:20] <rodney77> ok I just realized I can write to it using gksudo nautilus
[01:20] <windows> i had that once then remounted the card and could write to it
[01:20] <elky> rex____: that's not a channel emergency.
[01:21] <rex____> elky: who are you
[01:21] <rex____> elsky: can you help?
[01:21] <elky> rex____: one of the twenty+ people you just pinged. no, i'm eating dinner
[01:21] <elky> i got up because i thought there was a flooding incident
[01:22] <rex____> elky: ya idc
[01:22] <rex____> lmao you
[01:22] <elky> you seem to have forgotten to read the guidelines for using this channel
[01:22] <elky> !guidelines
[01:23] <neurosis-> lol
[01:23] <rex____> Yeah might did a little mistake. I need help
[01:23] <windows> rex did you install in synaptic?
[01:23] <rodney77> hey guys, maybe help me instead because i'm following the rules and not being ridiculous
[01:24] <rex____> rodney77: go cops
[01:24] <elky> rodney77: sorry, no ideas
[01:24] <rex____> im in terminal
[01:24] <Goose_> So I guess I'm doing something wrong
[01:24] <phunyguy> or we can settle down as we are all volunteers.
[01:24] <rex____> elky: multiple users is not allowed.
[01:25] <Goose_> What do I have do to actually switch between kubuntu and ubuntu. How can I change which one loads
[01:25] <rex____> Im at serer not graphical user interface
[01:25] <windows> goose with grub
[01:25] <wafflejock> rodney77, yeah not sure can try reformatting with gparted
[01:25] <cfhowlett> Goose_, at login, click the selection gear and select your session
[01:25] <wafflejock> Goose_, you can install multiple desktop environments and pick during at the logout/login screen
[01:25] <rodney77> thanks wafflejock, I will try but when I tried it before, it wouldn't even let me. even gparted thought the filesystem was read-only
[01:26] <Goose_> Aliright
[01:26] <Goose_> thanks
[01:26] <phunyguy> windows: that is incorrect.  Please be helpful.
[01:26] <wafflejock> Goose_, should just be the unity-desktop package I'm pretty sure
[01:26] <phunyguy> You don't change which desktop environment loads with grub.
[01:26] <windows> i was guessing
[01:26] <cfhowlett> windows.  don't.  if you don't know, don't give advice.
[01:27] <phunyguy> If you installed both as separate OSes, then Ubuntu is smart enough to create the entries for you.
[01:27] <Craigwell> I want to clone my laptop's 80gb HD with 14.04 and Win7 partition, along with a common FAT32 partition, onto a larger hard drive. I have a USB enclosure for the new drive I can use, before I swap it into the system. Anyone have suggestions on what the best method is?
[01:27] <rodney77> yeah, gparted can't even make my parition
[01:29] <Craigwell> I've been reading about clonezilla, but it's talking about partitioning a thumbdrive for use with it, etc and I'm thinking that's making it more complicated than it needs to be?
[01:29] <wafflejock> Craigwell, clonezilla is nice but would need a "third drive" something to clone the image to then from the image to another disk I'm pretty sure... may be able to go direct disk to disk but typically I've used it for backup purposes or cloning over multiple machines
[01:30] <rodney77> nm, my partition table itself was corrupted
[01:31] <rodney77> i rebuilt this and so far, so good
[01:31] <rodney77> thanks
[01:31] <wafflejock> rodney77, ah good to know
[01:31] <Goose_> So how exactly do I get into grub at loadup?
 Thank you.. It may be unavoidable, not sure. I guess I can understand why, if an image needs to be made first.
[01:31] <Goose_> I just get the Ubuntu screen and load in normally
[01:31] <deadmund> Goose_: I helped you earlier.  What are you trying to do?
[01:31] <Goose_> DO I need to remove ubuntu-desktop then install kubuntu?
[01:31] <Goose_> Just load kubuntu
[01:31] <cfhowlett> Goose_, grub will NOT switch sessions as you requested.
[01:31] <Goose_> Then what do I have to do?
[01:32] <Goose_> remove ubuntu, install kubuntu, reboot? or what?
[01:32] <deadmund> Goose_: turn on ubuntu as normal, log out, click the gear icon, change it to "KDE" "plasma" or whatever, log back in.
[01:32] <cfhowlett> Goose_, on the login screen there is a round gear.  click.  it will drop down you session choices
[01:32] <Goose_> Oh
[01:32] <Goose_> Well
[01:32] <deadmund> Goose_: Did you already install the package: "kubuntu-desktop"  ?
[01:32] <Goose_> Be right back haha
[01:32] <Goose_> yes
[01:32] <wafflejock> Craigwell, yeah just don't recall ever doing it direct disk to disk though I'm pretty sure it does do the partition resizing for you just did some googling looks like there's some other methods but have to manually resize the partitions afterwards http://askubuntu.com/questions/151127/how-do-i-move-copy-my-entire-ubuntu-system-to-a-different-hard-disk
[01:34] <Craigwell> wafflejock: I'll dig a little deeper. I was expecting to resize partitions on the new drive when done.
[01:34] <wafflejock> Craigwell, yeah from a little more searching looks like maybe Clonezilla will do the direct disk to disk too
[01:34] <wafflejock> Craigwell, http://askubuntu.com/questions/106527/how-to-move-ubuntu-installation-from-one-hdd-to-another
[01:36] <tim_> im trying to connect my ubuntu server vm to my debian host through ssh
[01:36] <tim_> not sure what i should be doing for network interfaces
[01:36] <Craigwell> wafflejock: Ok, Thank you. I'll read further. SInce I don't do this type of thing often, I figured I'd check here about preferred methods. Worst case scenario, I can start from scratch - but would rather not. Seems like it might be a wash, taking the time to get all the steps right - especially grub / uuid vs. fresh installs lol . Thanks again
[01:37] <talsamon> the fucking systemd is stole my swap with his dozens of tmpfs without tell a word, now i can reinstall, thats bullshit !!
[01:37] <cfhowlett> talsamon, profanity won't help and it's prohibited in this channel.  stop.
[01:38]  * eggbeater no longer has virgin eyes
[01:38] <talsamon> cfhowlett, the systemd could not overwrite my swap, without say any warning, what should that be, torture the users
[01:39] <talsamon> is it possible to disable systemd
[01:39] <kostkon> talsamon, no i'm afraid
[01:40] <talsamon> I have no swap anymore, and a dozen of zram warnings what should I do
[01:40] <eggbeater> Really, recovering what you can and reinstalling is the fastest thing.
[01:42] <talsamon> reinstalling fuck off
[01:42] <talsamon> that's a good idea, I never would found this
[01:43] <eggbeater> no profanity, please. There are minors here.
[01:43] <jason__> I'm getting g++ is not found, but if I do apt-get install g++ it says it's already installed. Anyone have any idea what might be causing this?
[01:44] <kostkon> jason__, try sudo apt-get install build-essential
[01:44] <jason__> installed as well
[01:49] <KM0201> you dont need to repartition the drive if you're installing over an old install
[01:49] <KM0201> just choose manual install, and point it at the old install's / drive, done
[01:53] <Goose_> Hey guys I got KDE running!
[01:53] <Goose_> But it doesn't appear to be running plasma 5
[01:53] <Goose_> Well, at least it didn't look that video that's going around
[01:54] <eggbeater> Goose_: Sweet on ya, mate!
[01:54] <Goose_> How do I get it running plasma 5 though?
[01:54] <Goose_> Well actually can I run plasma 5 on 14.04
[01:54] <Goose_> ?
[01:56] <nogoodnamesleft> I've not yet noticed a difference between 14.10 and 15.04. Just as a user. All the changes seem technical/hidden to the end user.
[01:56] <nogoodnamesleft> Icons are slightly different I guess.
[01:57] <Johnny_Linux> nn
[02:00] <wafflejock> nogoodnamesleft, looked at the upgrade page looked like mostly performance tuning and added some options for configuring the menus and a few other small UI things, says they are basically still working through the Unity 8 convergence stuff for making the phone interface work, heard some interesting things about that but think it's for another room
[02:02] <ubuno> how can i show you a screen shot , so you can help me !!
[02:02] <cfhowlett> ubuno, imgur.com
[02:03] <OerHeks> http://imgur.com/
[02:04] <penos> 14.04 LTS has no scummvm
[02:04] <penos> :(
[02:06] <ubuno> My ubuntu alarm clock doesn't work , it doesn't make noise when i click in play I get this message http://i.imgur.com/Q11M4uE.png?1?7596 , please help !!!
[02:07] <ubuno> D I need to install some plugin ??
[02:08] <ubuno> ??
[02:08] <faultyjohn> idk
[02:08] <[n0mad]> ubuno: can you play any mp3?
[02:08] <[n0mad]> outside of that app?
[02:08] <ubuno> YES
[02:08] <ubuno> YES I CAN
[02:12] <ubuno> Any  HELP ??
[02:13] <[n0mad]> ubuno: what if you select a different mp3 from the app?
[02:14] <[n0mad]> same error?
[02:14] <kroq-gar781> ubuno, also, does the program require using an mp3? If not, try using an audio file of a different format and see if the error still appears.
[02:15] <penos> 14.04 LTS has no scummvm
[02:15] <penos> :(
[02:15] <cfhowlett> I would be surprised if an ubuntu app REQUIRED .mp3
[02:15] <[n0mad]> also, did you get that alarms from the market? i just downloaded it from there and it looks different.
[02:16] <TripWire> Hi...does anyone have knowledge of using PulseAudio in Ubuntu 14.04?
[02:16] <kostkon> [n0mad], there are many alarm apps in the software centre
[02:16] <[n0mad]> if i type in alarms i see 5, not too many
[02:17] <kroq-gar781> penos, are you sure it doesn't? apt://scummvm
[02:17] <[n0mad]> and i picked the one that looked closest in the screenshot
[02:17] <[n0mad]> but i can't even resize the window
[02:17] <kostkon> [n0mad], ok, let's say i meant more than 1
[02:17] <penos> kroq-gar781, i have to add the source?
[02:17] <kroq-gar781> penos, are you using a live image? If so, then yes, you need to enable the Universe component.
[02:17] <[n0mad]> but what it seems like to me is the alarms app being used doesn't know what your default player is
[02:18] <[n0mad]> as it's not actually playing the mp3
[02:18] <ptol34> Can you run plasma 5 on 14.04?
[02:18] <[n0mad]> and relies on your player to
[02:18] <penos> kroq-gar781, i have installed on machine and universe is enabled
[02:18] <[n0mad]> that's what this one did, uses my rhythmbox to actually play
[02:19] <cellis> are you still having problems with pulse?
[02:22] <locksmith> hi
[02:25] <Stanley00> A little late, but I still want to say this. Congarulation you all with new Ubuntu release! :3
[02:25] <romulobr> hi, I installed ubuntu gnome 14.10 on my macbookpro, wi-fi didn't work after wake from sleep, I tried to fix it and now the computer never wakes up from sleep. Does anybody have a sugestion on how to fix that?
[02:25] <romulobr> do you think upgrading to 15.04 might solve it?
[02:26] <cfhowlett> romulobr, possibly but ask the !mac resources
[02:27] <romulobr> sorry, i don't know what !mac resources means
[02:27] <romulobr> cfhowlett: ^
[02:27] <cfhowlett> !mac | romulobr see all the options here
[02:29] <TripWire> cellis, I want the sound to automatically transfer to my HDMI device when I plug it into my laptop
[02:34] <coolstar-pc> is there a channel where I can get some help with grub?
[02:35] <coolstar-pc> need to load a custom DSDT because my motherboard is buggy and seems to hate any OS I throw at it with the stock DSDT
[02:38] <ItsMeLenny> i'm on ubuntu 14.10 and i have this problem where if i boot my desktop, then boot my laptop after that acts as a shared network over ethernet, then the lan on my desktop wont turn on
[02:39] <ItsMeLenny> i have to boot my laptop first, whos lan will turn on fine if it wasnt connected to something, (laptop is not ubuntu), but my desktop needs to havethe lan connected and the opposite end switched on to be able to even work
[02:39] <ItsMeLenny> i cant turn my computer on then plug in an ethernet, what would be causing this problem
[02:40] <canonicaldroid> Spotify wont open on ubuntu 15.04
[02:40] <ItsMeLenny> when my computer boots i do see in the bootup printout that it gets an error if there is no lan connected
[02:42] <OerHeks> coolstar-pc, is this page any help? https://wiki.ubuntu.com/KernelTeam/HardwareEnableWithDSDT
[02:42] <ItsMeLenny> it also takes a little longer to boot when there is no ethernet connected, because of that error
[02:45] <netameta> Anyone has a clue why screenshots that being taken by odesk are all black ?
[02:45] <netameta> No content at all
[02:49] <OerHeks> netameta, where do you find odesk ? it is not in the repos
[02:49] <neargulars> hi guys im trying to get wireless working for my thinkpad using the intel 7260 chipset. I've found walk throughs on the internet for installing "iwlwifi" pkgs but I encountered errors along the way...
[02:51] <wafflejock> netameta_, dunno about odesk but can get shutter, sudo apt-get install shutter, it's a nice screen capture app
[02:52] <netameta_> well its just a app that time logs
[02:54] <somsip> netameta_: it's a proprietary app provided by the third party and not supported here. Have you asked odesk support about it?
[02:54] <netameta_> somsip, Thanks for the help, i managed to fix it...
[02:55] <deadmund> neargulars: You still there??
[02:57] <neargulars> hello deadmund
[02:58]  * Quantos is away: Veni, Vidi, Vici
[02:59] <Boxedin123> Hey, anyone here?
[02:59] <Boxedin123> I don't need support with anything I'm just wondering how something works
[02:59] <kristhia1> how do i enable html5 in ubuntu?
[02:59] <kristhia1> or is it in the browser?
[03:00] <Boxedin123> I read how to build sfml in Linux...and it only takes 3 commands in the directory...I haven't tried it and is it THAT easy?????? I'm coming from windows and you had to use cmake and all that.
[03:00] <kostkon> kristhia1, browser. Why?
[03:01] <Boxedin123> And if so how does that work technically? Under the hood what is it doing what is it using???
[03:02] <kristhia1> im sorry i am currently using the default browser
[03:02] <kristhia1> firefox
[03:02] <kristhia1> how do i enable html5?
[03:03] <kostkon> kristhia1, do you mean on youtube for example?
[03:03] <kristhia1> kostkon: i need it to view videos in some sites.
[03:03] <kristhia1> yep
[03:03] <kristhia1> and in youjizz too. :D
[03:04] <nonuby> html5 video is already enabled, you can opt in explicitly to youube experiment at https://www.youtube.com/html5
[03:05] <kristhia1> actually i am watching something in youjizz and it says the video requires html5
[03:05] <kristhia1> not in youtube :(
[03:05] <kristhia1> im sorry
[03:05] <Boxedin123> Anyone have any insight on my question?
[03:05] <kostkon> kristhia1, they are not 100% supported yet, some codecs are missing in firefox, we are waiting for mozilla to officially activate the media extensions in linux, but you can try this http://www.ghacks.net/2014/05/10/enable-media-source-extensions-firefox/
[03:06] <kristhia1> can i try other browser instead?
[03:06] <kostkon> kristhia1, it's already there but not activated, afaik
[03:07] <kostkon> kristhia1, yes, Chrome.
[03:07] <kristhia1> will chromium do the trick?
[03:07] <kostkon> kristhia1, no
[03:07] <kristhia1> i dont know how to install chrome in ubuntu
[03:07] <kostkon> kristhia1, you need chrome. You can get it from here http://www.google.com/chrome/   download the version for ubuntu and then double click on the .deb file to install it. It's that easy
[03:08] <kristhia1> ok
[03:08] <kristhia1> ty
[03:09] <TripWire>  Hi...does anyone have knowledge of using PulseAudio in Ubuntu 14.04?  I want it to automatically switch my audio over to my HDMI device when I plug it into my laptop and vice versa.
[03:09] <kristhia1> downloading now
[03:09] <TripWire> Right now, I have to select the option to do so
[03:09] <kristhia1> thanks for the help kostkon
[03:09] <kostkon> kristhia1, np
[03:11] <captainfantastic> does anyone find those lines in sidebar of nautilus ugly
[03:14] <Boxedin123> I read how to build sfml in Linux...and it only takes 3 commands in the directory...I haven't tried it and is it THAT easy?????? I'm coming from windows and you had to use cmake and all that and if so what's it doing under the hood etc? How is it doing it? Thanksalso please let me know if you can see my message.
[03:19] <SchrodingersScat> Boxedin123: idk, what are the commands?  and message received.  Most are easy, so wouldn't surprise me if it's something like ./configure && make && make install
[03:20] <RobinHood2015> I just installed Ubuntu 15.04 and I can't connect to a WiFi network. It gets stuck on that animated "WiFi connecting" icon forever. What's wrong here?
[03:21] <cribbageSTARSHIP> hello?
[03:23] <Boxedin123> Can anyone even seeee my messages?
[03:23] <cribbageSTARSHIP> i can
[03:23] <Boxedin123> Hey! Do you know anything about how Linux works?
[03:23] <Boxedin123> I just want to understand what something is doing
[03:24] <SchrodingersScat> !man | Boxedin123
[03:27] <cribbageSTARSHIP> Boxedin123: what are you looking for exactly. what do you want to do
[03:27] <Nexuus> anybody enjoying the 15.04 goodness yet?
[03:30] <subin> hi
[03:30] <cribbageSTARSHIP> Nexuus: not yet. Im trying to fix my samba server
[03:30] <cribbageSTARSHIP> subin: hey!
[03:31] <subin> its heared that ubuntu uses more system resourses..?
[03:31] <somsip> subin: than what>
[03:31] <cribbageSTARSHIP> subin: i would think unity uses more
[03:32] <subin> ok... now i uses mint.. it freezes when i copy large files from my pc to mobile
[03:32] <cribbageSTARSHIP> somsip: i think subin is referring to the weight of DEs
[03:32] <somsip> subin: mint is not supported here
[03:32] <cribbageSTARSHIP> subin: how are you sending the files
[03:32] <snadge> is there a less purple vivid desktop background? :p
[03:32] <subin> data cable
[03:32] <snadge> now that its released.. someone will surely come to the rescue
[03:32] <cribbageSTARSHIP> subin: are you using android? use airdroid
[03:33] <subin> yes android...
[03:33] <somsip> !ot | cribbageSTARSHIP (particularly important the day after a new release)
[03:35] <kostkon> snadge, of course, check the alternative version http://www.omgubuntu.co.uk/2015/03/ubuntu-15-04-default-wallpaper-and-it-may-surprise-you
[03:35] <achom> guys, how do i get xterm to align itself?
[03:35] <achom> like i want the first instance which i top to start from top left covering about 1/4th of screen
[03:35] <somsip> achom: are you using unity?
[03:35] <achom> 2nd instance top right, third bottom left...
[03:36] <Boxedin123> So guys...why does Ubuntu come with a GCC compiler ...because people asked for it?? Also how is it possible for Linux to build library's without something like cmake??
[03:37] <somsip> Boxedin123: you keep asking very generally (and mostly non-ubuntu) questions. Do you have a direct support issue?
[03:37] <achom> somsip: pantheon
[03:38] <somsip> achom: what version of ubuntu are you using?
[03:38] <achom> somsip: im actually using elementar
[03:38] <somsip> achom: thought it might be. Not supported here
[03:38] <somsip> !elementary | achom
[03:39] <achom> somsip: oh i thought since it was built on ubuntu
[03:39] <achom> so it might be supported
[03:39] <somsip> achom: not the case.
[03:39] <achom> somsip: btw, can i know what do i call the feature i want
[03:39] <somsip> achom: tiling
[03:39] <achom> somsip: thank you for your help
[03:40] <somsip> achom: np
[03:42] <achom> somsip: mind if i PM you?
[03:42] <somsip> achom: please don't. too busy and I only help in channel when i can
[03:42] <achom> alright np
[04:03] <nogoodnamesleft> err, hi. Have we lost the i2c kernel modules in vivid / 3.19? i2c_i801 and i2c_dev are no longer showing for me and my laptop needs them
[04:07] <nogoodnamesleft> I am loading them in /etc/modules but lsmod is not showing them.
[04:08] <faultyjohn> hello
[04:09] <francis> hello
[04:15] <bigGpick> Hey guys.
[04:17] <bigGpick> I'm looking for driver for a NX7300LE-TD256EH that is compatible with Linux.
[04:18] <Ben64> bigGpick: you mean a nvidia 7300
[04:19] <bigGpick> yes... let me check
[04:20] <Ricardo2015> !list
[04:20] <bigGpick> NX7300LE
[04:20] <Ben64> bigGpick: well they're already in ubuntu, you just need to install them. you need version 304
[04:20] <Ricardo2015> help
[04:21] <Ben64> Ricardo2015: ask a question, give as much detail as possible
[04:22] <nogoodnamesleft> Vivid here. I've got i2c_i801 in /etc/modules so it should be loading up however lsmod isn't showing it. My laptop needs it for trackpad.
[04:24] <bigGpick> Version 304?
[04:24] <bigGpick> Ben64: Where is that found?  Package manager?
[04:24] <Ricardo2015> Anybody can configure Ricoh Aficio 2027 (network printer) in Linux? I'm a beginner, sorry...:(
[04:25] <Ben64> bigGpick: ubuntu software center -> edit -> software sources -> additional drivers
[04:26] <nogoodnamesleft> ok: sudo modprobe i2c_i801 hangs the machine... should I bug report this?
[04:29] <bdog7> is it out?
[04:29] <somsip> !outyet | bdog7
[04:30] <bdog7> put it away then :P
[04:30] <HerroWorlds> can someone please point me to a guide to add a configuration file for a dante SOCKS server to the default PAM setup on a ubuntu server?
[04:31] <Ricardo2015> exit
[04:31] <Ricardo2015> quit
[04:32] <HerroWorlds> ?
[04:39] <xiningli> e
[04:39] <xiningli> hi
[04:39] <xiningli> i am new here
[04:39] <xiningli> ....
[04:39] <xiningli> can anyone see me?
[04:39] <xiningli> qeq
[04:39] <xiningli> e
[04:39] <xiningli> wq
[04:39] <xiningli> e
[04:39] <gingermouse> xiningli: I can
[04:40] <somsip> xiningli: you are here. Stop with the test messages please
[04:41] <xiningli> we have so many people here
[04:42] <xiningli> ...
[04:42] <somsip> xiningli: this is a support channel. Do you have a support question?
[04:43] <Kage`> Ok, can someone give me a good direction on disk encryption with Ubuntu, please?  Every article (FullDiskEncryption, EncryptedFilesystems, etc.) are contradictory and pointing in circles of each other, claiming each other are bad ideas.  So.. what is the recommended standard?  luks, cryptsetup, +dm_crypt, ..?  Because they all say, "Yes."
[04:50] <xiningli> i dont know if we can send pictures to each other
[04:50] <xiningli> via irc
[04:50] <xiningli> i use irrs
[04:51] <somsip> xiningli: that is not somethign supported here. Type '/join #freenode' for advice about IRC
[04:52] <Zerkalerka> anyone got experience with nvidia 840m and ubuntu?  I get the black screen after login when installing the proprietary driver
[04:52] <Zerkalerka> always have to purge it and reboot
[04:58] <Zerkalerka> specifically after I always install the nvidia drivers on next boot a new ACPI error always pops up, disappears when uninstalled though.
[04:59] <bigGpick> uh-oh.  I'm gettinga  "gnu grub" screen....
[04:59] <bigGpick> version 1.98-1ubuntu13.  First option is Ubuntu, with Linux 2.6.32-73-generic
[04:59] <bigGpick> second option is the same (recovery mode)
[05:00] <bigGpick> no idea why i'm seeing this or what i'm supposed to do
[05:06] <xiningli> 你好
[05:16] <sillysquirt> ok guys, how do I do mobile broadband USB tethering with my cell phone?
[05:17] <sillysquirt> where it shows the signal strength and drives the modem inside the cell phone
[05:19] <rba1988> Hi guys. Just read that ubuntu will eventually move to snappy. What are the implications of this? Does this mean I can't do some easy apt-get install commands once this happens?
[05:19] <somsip> rba1988: where did you read that?
[05:20] <rba1988> http://www.webupd8.org/2015/04/ubuntu-desktop-to-eventually-switch-to.html
[05:21] <rba1988> somsip softpedia also has an article on it
[05:21] <rba1988> sorry is this the channel to discuss it? Or should I join another #ubuntu channel?
[05:22] <somsip> rba1988: i think the webpage you supplied has plenty of information linked from it that might answer your question. And #ubuntu-offtopic is probably better but possibly quiet at this time
[05:22] <rba1988> somsip: ok thanks
[05:43] <Zerkalerka> Ok, when I have my external monitor plugged in via HDMI and try to log in, I get a black screen.  If it is unplugged I can boot up fine, when I switch back to intel mode vs nvidia I can then log in using my external monitor.  Anyone know or can point me in the right direction to fix this?
[05:48] <Folatt> Hello there, I have a question, I recently switched SSD and installed Ubuntu on it, but something went wrong.
[05:48] <Folatt> My SSD drive cannot start unless I have my old SSD connected.
[05:49] <Folatt> For some reason when I try to boot my old SSD, it boots the new one.
[05:49] <JoshH99> Hey there, just ran the upgrade from 14.10 to 15.04, and sshd won't restart now. I have web KVM access to the system, but nothing else. Any advice?
[05:50] <Folatt> Does the sshd give any errors when you try to boot it?
[05:50] <Folatt> What do you see when you try to restart it?
[05:50] <Folatt> Did the upgrade finish?
[05:51] <JoshH99> I'll test that again. I just tried after the upgrade's reboot and then attempted to restart the service a few different times
[05:51] <JoshH99> Will test
[05:51] <Folatt> Okay, I have a similar problem right now, but at least half understand what happened.
[05:52] <UncleJoe> Hello
[05:52] <Folatt> Hello UncleJoe
[05:52] <Deep6> guys is there a way to get more information on packages that AREN'T installed on the system...i.e the equivalent of dpkg-query -s?
[05:53] <somsip> Deep6: yes, use dpkg-query -s
[05:53] <somsip> Deep6: sorry - just re-read and understood what you meant
[05:54] <JoshH99> @Follatt: http://cl.ly/1k0s0L2e0h12
[05:54] <UncleJoe> I have two 14.04 installs, and I want to create a link on the one (//Server/F) to the other (BIGPIG/5TB) so that I can eventually add the //SERVER/F to the //BIGPIG after I've moved all the files.  I have a sorter cleaning up files from SERVER/E to SERVER/F/*dir periodically.
[05:54] <UncleJoe> Too convoluted?
[05:55] <UncleJoe> *physically move the 3TB F: to the other machine after I've copied the files and made a link
[05:55] <somsip> Deep6: apt-cache show {package} may be what you want
[05:55] <JoshH99> @Folatt - Sorry - mistyped your username in my above reply
[05:56] <Folatt> Doesn't matter, I looked. It's not the problem I have. I know that much now.
[05:56] <Flannel> Deep6: depending on what info you're looking for, it's either apt-cache show [package] or apt-cache showpkg [package]
[05:57] <JoshH99> @Folatt - Luckily, I only did this on a system that I can live without SSH for a while on, since it's just an ownCloud server I have set up.
[05:58] <Folatt> Your ownCloud server uses Ubuntu?
[05:59] <JoshH99> @Folatt - Yep. On Vultr's 2GB VPS.
[06:00] <JoshH99> @Folatt - Interestingly, when I try to `service ssh restart`, I'm asked to decrypt the SSL keys I use for apache
[06:01] <UncleJoe> I'll try rewriting my question
[06:02] <Folatt> joshh99, That's all a little bit beyond me. I have a owncloud server too using a very simple user-friendly OS build for it, so I have no idea what a VPS is.
[06:03] <Deep6> Flannel: doh! of course.... I'ved used apt-cache search a ton... doh!
[06:03] <Folatt> VPS stand for Virtual Private Server?
[06:03] <JoshH99> @Folatt - Yep!
[06:04] <JoshH99> @Folatt - For you or anyone else who might try to help, this is what happens when I run `service ssh status`: http://puu.sh/hoSZq/2e7c847104.png
[06:04] <Deep6>  /nicklist
[06:05] <UncleJoe> 2 Ubuntu installs 14.04- (1) HDD that I want to physically remove.  (2) has a 5tb.  I want to move the content of (1) to (2), set up a (sym?)link so that any new content shows as going to (1)/Folder, but it is actually going to (2)/Folder.
[06:06] <UncleJoe> Also allowing me to physically remove the (1) whenever I'm done moving content.
[06:06] <UncleJoe> Hopefully this makes more sense now, anyone?
[06:07] <Ben64> UncleJoe: no
[06:07] <somsip> !info clonezilla | UncleJoe
[06:08] <somsip> UncleJoe: so clone [1] to [2], remove [1] and boot to [2].
[06:08] <UncleJoe> somsip: Would this allow me to have a symlink after?  I ask because I have a downloader/sorter which doesn't cooperate with // paths
[06:08] <Symmetria> mmmmm rocketraid controller driver doesnt compile under the new kernel in ubuntu 15.04, just had to switch back to older kernel
[06:09] <Ben64> UncleJoe: i don
[06:09] <Ben64> 't see where symlinks are necessary
[06:09] <somsip> UncleJoe: what would a symlink accomplish given you're removing 1? What have // paths got to do with anything?
[06:10] <Folatt> JoshH99, When your video stops, does it freeze there? I mean, the last log entry is saying that 's running some module.
[06:10] <UncleJoe> somsip: The software on (1) downloads content to a different drive, verifies it and then moves the sorted content to the drive in question.  It is a PITA to reinstall and from what I understand, it won't allow typing a "//192.168.0.1/$folder"
[06:11] <dtscode> hey guys... im on ubuntu 14.04 and installed typescript via $ sudo npm install -g typescript, but when i type tsc test.ts, i get "/usr/bin/env: node: No such file or directory". how can i fix this?
[06:11] <dtscode> i recognize that this might not be the best place to ask, but if anyone happens to know, im all ears
[06:11] <JoshH99> @Folatt - Nope. Just when CloudApp stopped recording
[06:12] <somsip> UncleJoe: so it's two servers and not just two drives? And the software on server 1 needs to copy to a mounted drive on 2?
[06:13] <Folatt> joshh99, I think the last log entry is important, because that's usually where see the error.
[06:13] <Folatt> Because that's usually where the error is.
[06:13] <JoshH99> @Folatt - Fixed it after digging through the syslog file. Privilege separation directory /var/run/sshd was missing. Created it with 0755, and it worked.
[06:14] <UncleJoe> somsip: Two servers, correct.  I would like it to copy to the other, but I would like to have no path changes if possible- so a link that says the drive is still attached, but it's actually on a different comp.
[06:14] <Folatt> JoshH99, You fixed it? :)
[06:14] <JoshH99> @Folatt - Yep! After digging through a long log file on a tiny virtual console window lol
[06:15] <faust> dtscode: did you installed nodejs? If so try this: sudo ln -s /usr/bin/nodejs /usr/local/bin/node
[06:15] <dtscode> faust, i did. and yeah i just found that solution. thanks though :D
[06:15] <somsip> UncleJoe: so server 1 downloads to /media. And you want saves to /media to end up on sever 2. So you mount a drive from server 2 onto the mountpoint 'server 1 /media'. What are currntly using to access server 2? Samba?
[06:16] <UncleJoe> somsip: samba/cifs
[06:16] <faust> dtscode: you may also want to open a bug about this
[06:16] <faust> too late
[06:16] <Folatt> JoshH99, that's great. I should have known you could just check the syslog, since you said you have access to it.
[06:17] <JoshH99> @Folatt - Yeah. oh well. Hey - at least you gave me the morale boost to dig into the log. I probably would have just called it a night otherwise :).
[06:17] <somsip> UncleJoe: IIRC Samba is slow, and my network saves are abysmally slow to a NTFS Samba mount. Maybe a different network mount filesystme would be better for you? Like NFS or SSHFS
[06:17] <Folatt> JoshH99, no problem and good night!
[06:18] <fil10> hello everyone, i have some question about lubuntu. can i ask here,guys?
[06:18] <UncleJoe> somsip: Yeah- I think it is NTFS on (1) and (2) has EXT4
[06:19] <UncleJoe> (2) is using cifs though
[06:19] <somsip> UncleJoe: IME writes to NTFS over Samba are very slow. Dunno about reads. Still, Samba might not be your only (or your best) solution. Like I said
[06:21] <UncleJoe> Time for some researching... THANK YOU somsip. Appreciate the time.
[06:21] <UncleJoe> :)
[06:21] <somsip> UncleJoe: np
[06:24] <Nexuus> just upgraded...Vivid seems quite a bit more responsive than 14.10.
[06:27] <pragomer> hello. is there a special channel where I could ask a question about remastering ubuntu?
[06:28] <somsip> !remaster | pragomer
[06:28] <penos> hello
[06:28] <pragomer> Just got a specific basic problem / question. Items I copy to "skel" are ignored.. doing the remaster "manually".
[06:29] <pragomer> Such as /home/skel/.config/xfce4/panel/
[06:35] <pragomer> .
[06:36] <alex53454322> i have added an "ufw deny from ip.add.ress", but my apache server is still getting smashed by it. any ideas?
[06:37] <alex53454322> does the ufw order matter?
[06:39] <penos> hello my friends
[06:40] <hululu> Hi all! I just have installed Ubuntu 15.04, I really like it, but I found a bug. On the first boot my computer connect to the WiFi network, however there is no internet connection. I need to re-connect manually every first boot. Is sombeody experience this problem too?
[06:43] <euxneks> howdy, ubuntu won’t show me a login screen after updating to 15.04
[06:44] <euxneks> All I see is a purple screen with “Ubuntu” in the middle and 5 orange dots below it
[06:44] <euxneks> what logs can I look at to figure out what went wrong?
[06:44] <faust> !ask | pragomer
[06:45] <pragomer> Thanks and sorry ubottu
[06:45] <pragomer> !patience
[06:49] <Exxodus> Hey, so I need some serious technical help. >.>
[06:49] <somsip> !details | Exxodus
[06:50] <Exxodus> I seem to have lost Nautilus on my main log-in and cannot seem to repair it through apt-get
[06:51] <Exxodus> I'm actually using a friend's PC so that I can troubleshoot in real-time.
[06:51] <Exxodus> Basically, my apt-get keeps giving me a 404, Ubuntu keeps experiencing an internal error, and I cannot, for the life of me, get ubuntu to update.
[06:51] <Exxodus> Oh, and my desktop doesn't load either.
[06:52] <somsip> Exxodus: a 404? Have you tried using different sources?
[06:52] <Exxodus> I can do that?
[06:52] <somsip> Exxodus: https://help.ubuntu.com/community/Repositories/CommandLine
[06:53] <Exxodus> Alright, I'll try that.
[06:54] <somsip> !pm | Exxodus (and what version of ubuntu are you running?)
[06:55] <Exxodus> I'm presently using Ubuntu 12.10 on a HP computer with a Grub 2.0 dualboot.
[06:55] <somsip> !2.10
[06:55] <somsip> !12.10
[06:55] <somsip> Exxodus: so, that's not supported anymore. You need to update
[06:55] <steve> fresh install of 15.04, first reboot, ctrl-alt-t doesn't work
[06:55] <steve> it's set to open a terminal
[06:55] <steve> anybody seen this?
[06:56] <Exxodus> somsip: Right, but I cannot seem to get a reboot to prompt?  Am I able to update from Terminal?
[06:56] <rahul_> can we use lxd container hypervisor to manage docker containers?
[06:58] <somsip> !eol | Exxodus (I think the link is on here)
[06:58] <faust> rahul_: I think that latest versions of docker are not based on lxc anymore, if you want to use lxc you better not use docker
[06:58] <faust> probably you better not use docker anyway
[06:58] <faust> :P
[06:58] <rahul_> k
[06:59] <Exxodus> ubottu: I don't have a preference.  I'd just like for my OS to work.
[07:00] <somsip> Exxodus: have a read through the last link  See https://help.ubuntu.com/community/EOLUpgrades
[07:00] <Exxodus> somsip: reading over  Thank you.
[07:00] <kamil7> hi guys, where will be possibility to install 3.19 on trusty through LTS Enablement stack?
[07:01] <somsip> kamil7: details may be on here https://wiki.ubuntu.com/Kernel/LTSEnablementStack
[07:03] <kamil7> somsip: thanks
[07:03] <hd1> hmm... it would seem that ssh on trusty is messed up
[07:04] <Ben64> hd1: it isn't
[07:07] <hd1> Ben64: http://pastebin.com/iYKbaEYB
[07:07] <somsip> hd1: are you running OSX?
[07:07] <euxneks> so, I can ssh into my machine but I cannot log in because there is no graphical login screen (just a purple screen with Ubuntu and 5 orange dots) and I cannot switch to any TTY. I have just recently upgraded to 15.04
[07:07] <euxneks> I mean, I can log in with ssh
[07:10] <hd1> somsip: irrelevant, i get the same from freebsd and netbsd and openbsd
[07:10] <faust> Is "http://packages.ubuntu.com/" search in package contents broken?
[07:11] <hd1> but, yes, that pastebin is from my laptop running os
[07:11] <somsip> hd1: so you are saying this is down to sshd daemon on ubuntu?
[07:11] <hd1> x
[07:11] <hd1> somsip: that's the only thing i can think of, unless it's an ec2 problem
[07:12] <somsip> hd1: and when did you last successfuly connect to that server via SSH?
[07:12] <hd1> which is unlikely because the server i'm chatting from is also on ec2
[07:12] <hd1> somsip: 4-5 hours ago?
[07:12] <hd1> i can still access the webpage
[07:13] <somsip> hd1: so you are saying it's must be something that has broken on Ubuntu SSHD in the last 4-5 hours?
[07:14] <hd1> somsip: no, like I said, it may be something to do with the zone or the server or ubuntu's sshd, i'm just trying to narrow things down
[07:14] <murcha> i blocked an ip from accessing my webserver using ufw/ubuntu 14.04, but i saw that the ip accesses my server from log file
[07:15] <somsip> hd1: given the version of sshd that server is running, it has probably not been updated for some time. Current is >1.0 IIRC. I suggest you contact the service provider before claiming that it's an OS problem per se
[07:15] <Exxodus> somsip: Could you provide that EOLU link again?
[07:16] <somsip> Exxodus:  https://help.ubuntu.com/community/EOLUpgrades
[07:17] <Exxodus> So, here's an issue: I have no windows, no way to resize things and no desktop.
[07:17] <hd1> somsip: 6.2p2 is what the server is running, idiot
[07:17] <Exxodus> I can still run progras, but I am not able to resize windows either.
[07:17] <somsip> Exxodus: sounds like it's really messed up. Is anything stopping you from reinstalling a current version?
[07:17] <hd1> which you would know, if you'd LOOKED at the pastebin I provided, instead of being a knowitall git
[07:18] <Exxodus> Nothing that I'm aware of... short of my repositories not being up to date.  Would that EOL thing work?
[07:18] <blz> Hello, how do I export a variable such that it is available from `sh` ?
[07:18] <jango42> video card maybe Exxodus incompatible
[07:18] <hd1> if you're going to be the latter, just say so, because being idiotic about things is a waste of both of our times
[07:18] <hd1> got it, punk?
[07:18] <Ben64> hd1: that attitude will get you exactly nowhere. if you look at the paste again, "OSSLShim 0.9.8r 8 Dec 2011"
[07:18] <somsip> Exxodus: if it's very broken now, an upgrade might not mend it. It might, but maybe a clean start would be better
[07:18] <Exxodus> Well, how could I clean start?
[07:19] <Exxodus> GRUB won't let me boot anything from start-up
[07:19] <Exxodus> And it doesn't seem broken.  I created another account and it works fine.
[07:19] <somsip> Exxodus: download an ISO for a supported version, install it while reformatting everything. Perhaps save any data off first
[07:19] <Exxodus> Full desktop and everything.
[07:19] <Exxodus> Yeah, I have an ISO.
[07:19] <blz> I ask because adding `export MYVAR=/path/to/whatever` in .bashrc only works for bash (unsurprisingly...)
[07:19] <somsip> Exxodus: your call, your system, you know what you can see and what you can't. Either EOLU or reinstall from scratch
[07:20] <Exxodus> Right, but is it possible to reinstall from terminal?
[07:20] <somsip> Exxodus: no harm in trying EOLU and it it fails, reinstall from an ISO
[07:20] <hd1> Ben664: that's an up-to-date trusty, I don't care to compile things from scratch unless I have to
[07:20] <Exxodus> Alright.
[07:20] <hd1> again, as of the last time I got into the box
[07:21] <Ben64> hd1: it isn't up to date, which is why somsip said it wasn't. but instead you decided to start getting all snarky
[07:21] <somsip> Ben64: I just picked the right time to /ignore I think...
[07:21] <fidel_> hi - i do run 14.04 with 2 NVIDIA cards. First card has 2 displays attached - which do display "X screen 0". to the second NV-card i attached 1 display which runs "X screen 1". This works so far. My current problem with this setup is: the display/Xscreen1 is just black - giving a simple mouse-cursor and i cant do anything on it.
[07:21] <hd1> Ben64: no, somsips said that openssh wasn't up-to-date
[07:21] <jango42> any problems with 15.04?
[07:22] <hd1> which is ipso facto incorrect
[07:22] <Ben64> hd1: have fun with that
[07:22] <fidel_> i do run gnome if thats important in that context. How to make X screen 1 display the same gnome session aswell?
[07:22] <euxneks> how do I enable switching to TTYs in ubuntu 15.04?
[07:23] <hd1> euxneks: remote or local?
[07:23] <somsip> !text | euxneks (is this what you want?)
[07:23] <euxneks> Local machine, I wish to be able to ctrl+alt+f2 to get a TTY
[07:25] <jango42> euxneks try f1 through to f6 from memory
[07:25] <euxneks> jango42: what does “from memory” mean? I have already tried ctrl+alt+f1 through to f6, but I don’t get a TTY
[07:26] <euxneks> I assume this is something disabled in ubuntu :\
[07:26] <hd1> euxneks: pastebin /etc/ttys
[07:26] <jango42> Euxneks : ok what run level are you after ?
[07:27] <Exxodus> Okay.  everytime I try to install something, I get 'failed to fetch'
[07:28] <Exxodus> That seems like a big deal. >.>
[07:28] <euxneks> hd1: there is no file nor directory names ttys or something like that
[07:28] <euxneks> jango42: user level
[07:28] <euxneks> jango42: I’m not sure what runlevel that is :\
[07:28] <somsip> Exxodus: are you still trying to do something with 12.10 repos? Stop, stop. They're already dead.
[07:28] <Exxodus> Well, I'm trying to upgrade. >.>
[07:28] <somsip> Exxodus: following the EOLU guide?
[07:28] <Exxodus> Yes.
[07:29] <hd1> euxneks: /etc/getty?
[07:29] <somsip> Exxodus: and what CODENAME did you replace in your sources.list ?
[07:29] <Exxodus> But it tells me aptitude is not found.
[07:29] <Exxodus> quantal
[07:30] <somsip> That's 12.10. That's dead. Try using a supported version
[07:30] <hd1> Ben64: what you and your idiot friend were whinging about earlier is the LOCAL version of openssl/openssh, not the remote version
[07:30] <euxneks> hd1: I have a “britty”
[07:30] <rockcoco> is there any app can edit PPT?
[07:30] <somsip> !libreoffice | rockcoco
[07:31] <Exxodus> somsip: I'm aware that it is dead.  I'm trying to upgrade to something -not- dead.
[07:31] <hd1> and like I said, it is irrelevant, as I have the same problem with an up-to-date ssh version as well
[07:31] <rockcoco> cool
[07:31] <Exxodus> But it also doesn't recognize deb as a command.
[07:31] <somsip> Exxodus: then use CODENAME of a current supported version, not a dead one. Trusty is 14.04 and it's LTS.
[07:31] <euxneks> hd1: I have a number of tty#.conf files in /etc/init/
[07:31] <somsip> Exxodus: you should be editing that file, not running the commands in terminal
[07:32] <Exxodus> Oh.
[07:32] <Exxodus> How would I access that?  Hrm.
[07:32] <euxneks> again I am running Ubuntu 15.04, recent upgrade, cannot login with graphical login screen, I can ssh into the machine, the screen I have is a purple screen with ubuntu logo
[07:33] <somsip> Exxodus: "that file" being accessed with "sudo nano /etc/apt/sources.list"
[07:33] <rockcoco> why i can't connect to the sever
[07:33] <somsip> !details | rockcoco
[07:33] <KindOne> So, updated my ubuntu vps, any ideas as to why I'm stuck in 'read-only' mode, /var/log/dmesg http://sprunge.us/CUjI ; /var/log/boot.log http://sprunge.us/OiZN
[07:33] <rockcoco> i can't download it
[07:33] <skapism> on ubuntu server 14.04.02, is there any way to verify that cron is running the /etc/cron.d/php5 job?
[07:34] <somsip> rockcoco: "server"...."it".... these are not helpful. Explain more and you may get help
[07:34] <somsip> skapism: have a look at /var/log/syslog
[07:35] <skapism> somsip: I have, I see only 3 lines, reporting INFO, STARTUP, and another INFO (running @reboot jobs)
[07:35] <skapism> pgrep cron gives me a pid, so it's running
[07:36] <somsip> skapism: so you have no syslog entry that contains php5 at all? For current syslog or last syslog.1?
[07:37] <skapism> somsip: nope. I have waited over 30 minutes, so the script (it's the default one from the package) should have run at least once
[07:37] <somsip> skapism: depends - there is one old script that was nasty and caused me problems. what version of ubuntu?
[07:38] <skapism> 14.04.2 lts, ubuntu server
[07:39] <somsip> skapism: have a read and check yours. Maybe run it manually and watch for issues in top while doing so https://bugs.launchpad.net/ubuntu/+source/php5/+bug/1356113
[07:40] <skapism> somsip: thing is, I've run the script manually as root, it returns quickly, does its job, no problems
[07:42] <skapism> somsip: nevermind, it appears the cronjob is running. I have appended >> /var/log/phpcleanup.log to the cron line, and now that file is showing up
[07:42] <somsip> skapism: k
[07:42] <skapism> somsip: I just wonder why cron doesn't log the job itself
[07:42] <skapism> somsip: maybe it's by design in this case?
[07:43] <somsip> skapism: nah - shows up in my deskstop syslog and the first server I checked too. No idea why it isn't in yours. Is syslog current? Does it have the right permissions? Has logrotate dont something nasty to it? Moot questions maybe...
[07:45] <skapism> somsip: all packages are up to date, I'm not sure about logrotate though
[07:45] <somsip> skapism: it shouldn't do something like that. but no real ideas and clutching at possibles
[07:46] <skapism> somsip: well, logrotate wasn't installed. I just installed it
[07:47] <somsip> skapism: well, good luck. have to afk now
[07:47] <skapism> somsip: thank you for your help
[07:47] <somsip> np
[07:47] <euxneks> has anyone upgraded to 15.04 yet?
[07:57] <duncannz> on
[08:12] <Folatt> Hello there
[08:14] <beluga_> I installed open-vm-tools on Ubuntu 15.04, but how can I run it? This doesn't say https://help.ubuntu.com/community/VMware/Tools
[08:18] <Folatt> Why do you need VMWare?
[08:21] <beluga_> Folatt: I'm running Ubuntu in VMWare
[08:21] <bett> i just upgraded my os from 12.04lts to 14.04, am realising this on has a single workspace unlike the former with four, how do i increase the number of workspaces?
[08:22] <Folatt> Ahhh... and your main OS is?
[08:22] <trijntje> bett: settinngs -> appearance
[08:22] <beluga_> I installed 14.10 last year in VMWare, because I thought that was the only way to run a 64-bit version, but now I noticed Virtualbox does support 64-bit guests..
[08:22] <beluga_> Windows 7 is the host
[08:22] <geirha> odd, it overwrote your configuration from 12.04?
[08:23] <beluga_> ah I just solved it!
[08:23] <beluga_> sudo apt-get install open-vm-tools-desktop
[08:23] <beluga_> ^that fixed it.. now copy-paste works between guest & host!
[08:24] <bett> trijntje: let me check it out
[08:24] <Folatt> beluga_, I don't understand what you're doing. It sound like you run Ubuntu in VMWare and are installing VMWare in Ubuntu. Are you going to run VMWare in VMWare?
[08:25] <beluga_> Folatt: don't worry, it works now .. ([11:22] <beluga_> Windows 7 is the host)
[08:25] <Folatt> Okay, good luck!
[08:26] <beluga_> Folatt: I'm doing bug testing for LibreOffice :) look who is the top1 closer https://bugs.documentfoundation.org/page.cgi?id=weekly-bug-summary.html
[08:27] <Folatt> beluga_, good job!
[08:27] <Folatt> <- is nowhere near that skill level. Came here for my own set of problems.
[08:28] <gioans> hello
[08:28] <beluga_> Folatt: well I'm not particularly skilled, more of a generalist.. most bugs are very straightforward to test.. we simply confirm that some glitch happens!
[08:29] <gioans> i am a new ubuntu, and my ubuntu version is 15.04
[08:30] <gioans> i need everybody help me
[08:30] <Folatt> gioans, okay, what seems to be the problem gioans?
[08:31] <gioans> i install mycrosoft fonts (*.ttf), after that, i ơpen internet browser, is error fonts,
[08:31] <Folatt> Which internet browser?
[08:32] <gioans> firefox and operamini
[08:32] <gioans> firefox and opera
[08:32] <bett> i just upgraded my os from 12.04lts to 14.04, am realising this on has a single workspace unlike the former with four, how do i increase the number of workspaces?
[08:32] <Folatt> gioans, can you give the exact name of the package you installed?
[08:33] <Stanley00> gioans: please take a screenshot and paste it to imgur.com
[08:33] <gioans> ttf-mscorefonts-installer
[08:33] <Folatt> bett, did you find the setting?
[08:34] <trijntje> bett: system settings -> appearance -> behaviour, check 'workspace switcher'
[08:35] <bett> @Follat year i have checked on appearance settings but am not seeing the option to increase the number of workspaces
[08:35] <Folatt> bett, trijntje just told you, do you need me to send you a screenshot?
[08:36] <Folatt> gioans, what do you mean by error fonts, can you send a screenshot?
[08:37] <gioans> where ?
[08:37] <Stanley00> gioans: imgur.com
[08:38] <SaintMoriarty> can anyone help I am trying to install django and its failing http://pastebin.ca/2980074
[08:38] <bett> @follat, trijintje, yea please do that, in my appearance settings am only seeing the option for changing wallpaper,resizing of icons and changing of theme
[08:39] <Folatt> bett, that's the first tab, there's one besides Look, called Behaviour.
[08:40] <bett> #Follat thanks i have seen it, aloha man..
[08:41] <bett> #trijintje thanks man,
[08:42] <Folatt> I think trijntje is a woman.
[08:42] <Folatt> <- is Dutch too
[08:46] <ubuntu770> hi
[08:46] <ubuntu770> question:
[08:47] <gioans> Screenshot from 2015-04-24 15:42:46.png
[08:47] <gioans> it is the name immage i upload ti imgur.com
[08:47] <Luyin> gioans: that's not a screenshot
[08:47] <ubuntu770> if i install dual boot, ubuntu and win 7. in the setup of ubuntu i have to resize the partitions. what is the ubuntu partition and what win 7, left or right ?
[08:48] <k1l> gioans: we need the url
[08:49] <murcha> why ufw is not blocking ips in ubuntu 14?
[08:49] <k1l> murcha: why should it? can you explain more?
[08:50] <Atom747> moin
[08:50] <hackal> Hello, please where can I check under which user is my apache2 webserver running?
[08:51] <faust> hackal: ps
[08:52] <murcha> k1l: I used sudo ufw insert 1 deny out to IP and sudo ufw insert 1 deny IP to block some ips from accessing my webserver. I disabled and enabled the ufw. But when i look at log file, the ips are accessing my webserver.
[08:53] <gioans> http://i.imgur.com/E497Sha.png
[08:56] <k1l> murcha: "sudo ufw deny from <ip_address> to any  "
[08:57] <k1l> sudo ufw status #to test if its enabled at all
[08:58] <murcha> k1l: thanks i am issuing you suggestion
[08:59] <hackal> faust: thank you
[09:00] <phpcoder> hello everybody
[09:01] <phpcoder> i just donwload java jdk e jre
[09:01] <phpcoder> i put it in my home dir
[09:01] <phpcoder> now i think i should add global path
[09:01] <phpcoder> how can i do that?
[09:01] <svetlana> why
[09:01] <svetlana> why not install it from the repos
[09:01] <murcha> k1l: I did the way you explained, but still i see the ip accessing my webserver
[09:02] <kevinwincott> has anyone had problems with unity lenses in ubunut 15.04
[09:02] <phpcoder> svetlana, are you talking to me?
[09:02] <kevinwincott> i dont seem to get the option to add them when i visit the web pages, eg launchpad, twitter, bbc news
[09:03] <phpcoder> svetlana, openjdk ?
[09:04] <k1l> phpcoder: java is in the officila repos. install that
[09:04] <phpcoder> k1l, how can i check what java version ?
[09:05] <k1l> "apt search java" phpcoder
[09:05] <faust> well oracle's java is not in the repos
[09:05] <k1l> phpcoder: openjdk-8-jdk for example
[09:06] <phpcoder> there are big differences ?
[09:06] <phpcoder> oracle <-> openjdk
[09:07] <k1l> murcha: what gives you "sudo ufw status verbose" please out that into a pastebin
[09:08] <murcha> k1l: something like this http://paste.ubuntu.com/10877219/
[09:11] <k1l> murcha: i am not sure the "in" should be printed there
[09:11] <k1l> murcha: what command did you use exactly to block 87.253.132.201?
[09:12] <murcha> k1l: something like this sudo ufw insert 1 deny from 87.253.132.201 to any
[09:12] <k1l> murcha: with "something like" we cant find the error. please the exact line
[09:13] <murcha> k1l: sudo ufw insert 1 deny from 87.253.132.201 to any
[09:13] <phpcoder> k1l, i am installing jre and jdk
[09:13] <k1l> murcha: why the "insert 1"?
[09:13] <phpcoder> i hope there are not too many different with the official oracle
[09:13] <phpcoder> packages
[09:13] <murcha> k1l: because it should be the first row
[09:14] <phpcoder> guys pardon for the stupid question, but how can i check if there are drivers or other packages that i can install to best fix my hardware components?
[09:15] <k1l> phpcoder: see at "system settings" then "software and updates" then the last tab
[09:15] <phpcoder> for example i have AMD A10-5800K APU with Radeon(tm) HD Graphics × 4
[09:15] <phpcoder> ok
[09:18] <k1l> murcha: dont know.
[09:21] <_xer> https://help.ubuntu.com/community/HowtoPartition/PartitioningBasics this not give me enough information about guided - use entire disk or set up lvm
[09:21] <_xer> Thanks
[09:22] <Ben64> _xer: what is your question
[09:23] <k1l> honestly: for beginners i dont suggest lvm.
[09:23] <_xer> ubuntu server- I'm instaling it. I don't know what is recommended. Guided/manual/with lvm.
[09:23] <_xer> Thanks i will go for guided entire disk
[09:24] <_xer> i select detect network hardware and configure the network.. Will I able to use the network?
[09:24] <_xer> Installed the system - exciting..
[09:28] <rydzykje> Hey guys, I have a problem with java from RPM on Ubuntu. I've converted RPM to DEB by Alien and installed by DPKG -i $file.deb. After installation/reboot when I write: java -version im receving error "Error occurred during initialization of VM java/lang/NoClassDefFoundError: java/lang/Object" any ideas?
[09:29] <k1l> rydzykje: why did you start with a .rpm at all?
[09:30] <Seveas> rydzykje: yeah, that's messed up. Delete that package and install java the normal way.
[09:30] <rydzykje> My goal is to have few possibilites to install java - tar, apt, deb, yum, rpm
[09:31] <rydzykje> Can I find somewhere java oracle deb package?
[09:31] <Seveas> rydzykje: sudo apt-get install openjdk-7-jre
[09:32] <rydzykje> Seveas: not openJDK but Oracle Java :)
[09:32] <k1l> rydzykje: that is just making it more difficult than it should be
[09:32] <k1l> rydzykje: oracle provides .deb., ubuntu uses .deb. so use .deb
[09:32] <escargotdu25> hi kll and petrvs
[09:33] <k1l> hi
[09:33] <_xer> I press 'esc' and then go to 'finish installtion' again and it said to format. What does it mean, affect on my files?
[09:34] <k1l> escargotdu25: you can use the "tab" key to autocomplete the nicks. like writing "k1" and then press tab
[09:34] <escargotdu25> i went to ubuntu-fr channel
[09:34] <escargotdu25> oups
[09:35] <escargotdu25> k1l, ok
[09:35] <k1l> escargotdu25: and that works on the terminal for commands and paths too :)
[09:36] <chotaz`w> 15.04 broke my mysql packages, they are reporting as 'half-installed' and outing errors whenever I try to upgrade them. How can I go about fixing this?
[09:36] <escargotdu25> k1l, ok thanks i have a question that i did not have response on ubuntu-fr channel
[09:37] <k1l> !paste | chotaz`w put the whole errors there
[09:38] <_xer> I don't understand. If I click esc when I was in ubuntu-server install do I need to repeat all I did?
[09:38] <_xer> :(
[09:39] <chotaz`w> http://paste.ubuntu.com/10877356/
[09:39] <chotaz`w> _xer, why would u randomly push a button, that's the real question :P
[09:40] <escargotdu25> k1l, my question is i cannot use the instant messenger hello (firefox) i do see myself on the cam but cannot contact any person or see any person talking
[09:40] <k1l> escargotdu25: i am not familiar with the messenger from firefox
[09:40] <_xer> chotaz'w: It's not that. It say now(im in terminal) please insert the disc labeled. Before it told me to make sure you eject the disc :/
[09:41] <escargotdu25> k1l, ok no problem is skype fonctionning with ubuntu ?
[09:41] <_xer> But I have connection
[09:41] <k1l> escargotdu25: yes. install it from the partner repo
[09:41] <k1l> !skype | escargotdu25
[09:41] <chotaz`w> !ekiga
[09:42] <_xer> why when im in regular user i can't install openssh but when i go to root I need to enter the disc labeled.
[09:42] <Folatt> !VPS
[09:42] <k1l> _xer: what are you doing there at all?
[09:43] <k1l> _xer: run the installer to the end. reboot afterwards. done
[09:43] <_xer> Setup ubuntu-server for ssh then I can have linux with my OS and reading the book doing practical :D
[09:43] <_xer> k1l:
[09:44] <chotaz`w> you don't need the whole server if you're only looking for ssh capabiliteis
[09:44] <k1l> chotaz`w: sudo apt-get install -f #try that
[09:44] <k1l> _xer: did you install ubuntu server or not?
[09:44] <_xer> chotaz'w: I couldn't use my raspberry pi for my needs. I have no doubt ubuntu server will help.
[09:44] <_xer> k1l: I installed ubuntu server. (completed). Problem with setup ssh.
[09:45] <k1l> _xer: i dont understand what you are doing there and what the ubuntu issue is right now
[09:45] <chotaz`w> k1l, http://paste.ubuntu.com/10877378/
[09:45] <k1l> _xer: you need "sudo apt-get install packagename" to install packages. the user has no permissions to install packages without sudo
[09:46] <_xer> I enter that: $ sudo apt-get install openssh-server openssh-client . And it told me about media change: please insert the disc labeled.
[09:47] <chotaz`w> k1l, running force install retrieved exactly the same problem, an I just nuke mysql-* packaged with purge and re-install?
[09:47] <chotaz`w> s/an/can
[09:47] <k1l> _xer: please show a "cat /etc/apt/sources.list" in a pastebin
[09:47] <chotaz`w> !pastebinit
[09:47] <k1l> _xer: on the server install ssh should be installed as default anyway
[09:48] <k1l> chotaz`w: there seems to have been an issue before while removing it, and now it complains because it wants to remove stuff that got removed already
[09:49] <_xer> k1l: http://pastebin.com/SnADUTPd
[09:50] <k1l> _xer: seems like you did make mistakes while installing. it only got the cdrom as repo enabled. and not the repo servers
[09:50] <_xer> I guess reinstall lmao.. I did 4 reinstall already
[09:51] <k1l> chotaz`w: "sudo dpkg --purge --force-all  mysql-server-5.6"
[09:51] <_xer> It's like one mistake will ruin all
[09:51] <Ben64> _xer: what are you using to install, what are you installing on, its a pretty straightforward install, what are you doing to mess it up?
[09:51] <chotaz`w> _xer, how come you keep baffling up the install?
[09:52] <chotaz`w> run the media, say yes to the installer and just let it run through?
[09:52] <_xer> I'm installing ubuntu 64-bit server using VMware Player.
[09:52] <chotaz`w> VirtualBox is a friend :)
[09:52] <_xer> No!! I have like choose language/keyboard/detect and mount cd-rom options/ execute a shell/ load installer comonents from cd
[09:53] <_xer> It's not ubuntu desktop. It's a server
[09:53] <chotaz`w> _xer, http://www.osboxes.org/ubuntu/ grabv a vm from here, will be easier :)
[09:54] <chotaz`w> k1l, same ol'same :(
[09:54] <_xer> thanks but i want to have experience doing it
[09:54] <chotaz`w> i really have no ideia how the upgrade messed this up, might be because I had to to manually add some repos for the python connectors?
[09:55] <k1l> chotaz`w: ok, lets try a trick
[09:55] <chotaz`w> eaither way the upgrade disables third party repos before anything else, so I don't see how that could've been the problem.
[09:56] <k1l> chotaz`w: "touch ~/trick.sh"  then "sudo ln -fs  ~/trick.sh /usr/share/mysql-common/configure-symlinks"  then "sudo apt-get autoremove"
[09:56] <phpmiddleman> how can I recursively use asciidoc on folder to generate .html files from all .asciidoc files?
[09:57] <k1l> _xer: a server install is pretty easy. just go for the installer, make sure the vm-guest got network connection.
[09:57] <chotaz`w> no mysql-common there, only mysql , -apt-config and -workbench
[09:58] <k1l> chotaz`w: it tries to remove that one and cant find it. so we need to fake it
[09:58] <chotaz`w> ah, my bad x)
[09:58] <k1l> chotaz`w: its like it got removed in the first uninstall attempt that was blocked. and now wants to remove stuff that already was removed and is complaining
[09:58] <_xer> k1;It's easy for you to say that
[09:59] <chotaz`w> _xer, when you get it right, you'll see how easy it is for yourself
[10:00] <k1l> _xer: it sounds to me that you are making it more difficult than it should be. if you have specific questions we can try to work that out
[10:01] <_xer> k1l: what is the different version ubuntu 14.04 and 15.04 which should I go for?
[10:01] <k1l> for server definetly 14.04 since its lts
[10:01] <_xer> ok
[10:02] <k1l> !lts | _xer
[10:02] <chotaz`w> k1l, done! created the folder -> touched the file -> chmod 777 -> apt-get autoremove
[10:02] <chotaz`w> the symlink by itself did not work
[10:08] <_xer> still not work.. :/
[10:08] <escargotdu25> k1l,  i downloaded but can"t install it
[10:08] <k1l> what does not work?
[10:08] <k1l> escargotdu25: you dont need to download.
[10:08] <k1l> escargotdu25: you need to enable the partner repo and just install it from software center then.
[10:08] <_xer> It gives me media message same before...
[10:09] <_xer> Something about repo :/
[10:09] <k1l> escargotdu25: go to "systemsettings" then to "software and updates", then 2nd tab "other software" and check the both lines which say "canonical partner"
[10:09] <k1l> _xer: details matter
[10:10] <k1l> _xer: are you sure you got vmware setup the right way? is network given to the ubuntu?
[10:10] <_xer> k1l: It's read from the disc. Not like it using ubuntu repo..
[10:10] <_xer> k1l: there is a network.
[10:10] <k1l> _xer: yes, so it doesnt get network?
[10:11] <k1l> _xer: i dont know what you do there all the time. i can only guess from what you tell me. i did install a lot of server images and the installer does work. so please make sure your vmware guest got internet connection.
[10:11] <_xer_> I have network.
[10:12] <_xer_> I need to do this? http://askubuntu.com/questions/529/how-to-set-up-an-apt-repository
[10:13] <k1l> _xer_: no
[10:13] <k1l> the installer does all the work if you give him internet access
[10:13] <_xer_> I did.
[10:14] <_xer_> I can ping but it's read from the disc :/ .. You don't understand me or you don't know. One from both.
[10:15] <k1l> _xer_: again: you are making a lot of issues yourself: see this pictured howto: http://askubuntu.com/questions/340965/how-do-i-install-ubuntu-server-step-by-step
[10:15] <k1l> it is very very very very easy. you dont need to make apt repos or install ssh on your own. just follow the installer as shown in the pictures
[10:16] <escargotdu25> k1l, i just did it and it does not work
[10:16] <_xer_> damn I didn't find it/ Thanks
[10:16] <k1l> escargotdu25: what does not work?
[10:16] <_xer_> Better to send now than before
[10:19] <_xer_> k1l: This is very very old ubuntu installer.
[10:19] <_xer_> Im in stage load installer comonents from cd
[10:20] <k1l> _xer_: what ubuntu are you installing there?
[10:20] <_xer_> 64 bit server 14
[10:20] <escargotdu25> k1l, it is said  an error occured
[10:20] <k1l> or are you talking about the cli installer at all?
[10:21] <k1l> escargotdu25: please copy the error message and put it on paste.ubuntu.com and show the link in here
[10:22] <dzan> hi, howcome when I installed something using pip (python) I can't execute it?
[10:22] <escargotdu25> k1l,  it says in french : Erreur lors de l'analyse du CD
[10:22] <escargotdu25> Impossible de trouver un CD adéquat
[10:22] <oddeyed> Is there a guide anywhere to recovering from Deja Dup when my machine has failed?
[10:23] <k1l> escargotdu25: on the system settings for updates. make sure the "CD" lines are unchecked on the 2nd tab
[10:24] <escargotdu25> k1l, in english it means error when analysing the cd and impossible to find an adequat cd
[10:26] <_xer_> i didnt receive choose repo.. k1l: Do you even know how to install ubuntu server?
[10:26] <k1l> _xer_: what are you talking about?
[10:26] <_xer_> k1l: I don't think you have experience in ubuntu server
[10:27] <k1l> _xer_: m(
[10:27] <_xer> what is m(
[10:28] <escargotdu25> k1l, in updates only trusty-proposed is unchecked and there is no question of cds
[10:28] <k1l> escargotdu25: 2nd tab
[10:30] <escargotdu25> k1l, 2nd tab is called other softwares and all options are checked
[10:30] <k1l> escargotdu25: yes. that is the problem
[10:31] <k1l> uncheck the the line with "CD"
[10:32] <rydzykje> guys where can I find java direcotry installed by apt-get install?
[10:33] <escargotdu25> k1l, there is no line with cd, only canonical partners, idem with code source, independant, and idem with code source
[10:33] <k1l> escargotdu25: is this a live cd system?
[10:33] <escargotdu25> k1l,  what do you mean ?
[10:34] <k1l> escargotdu25: is this a ubuntu install? or is this a live system running form usb or cd?
[10:34] <BluesKaj> Hiyas all
[10:34] <_war10ck_> BluesKaj: Hello to you too
[10:35] <_xer> iits so easy to download the vmware ready but the installer is harder
[10:35] <_xer> this is so stupid it's not server!!
[10:35] <_xer> k1l: omg
[10:35] <escargotdu25> k1l, in fact i downloaded the ubuntu from the website and burned a dvd with the .iso file and then re-runned my pc on the dvd
[10:35] <_xer> this is ubuntu desktop
[10:35] <BluesKaj> Hi _war10ck_
[10:36] <k1l> escargotdu25: did you install ubuntu onto the disk in the pc or is it just running from the dvd?
[10:36] <escargotdu25> k1l, i installed it on the hard disk
[10:38] <k1l> escargotdu25: ok. this is to complicated. lets open up a terminal with "ctrl+alt+t"
[10:38] <k1l> escargotdu25: after that please do a "sudo apt-get install pastebinit"
[10:39] <_xer> What is: choose-mirror / download-installer/ openssh-client-udeb ..
[10:39] <_xer> What do I choose?
[10:39] <k1l> _xer: dont blame ubuntu, dont blame me. i just installed a 14.04.2 ubuntu server to prove you wrong. you are doing the mess.
[10:39] <_xer> k1l: answer ...
[10:39] <_xer> Please.
[10:39] <k1l> _xer: wher is that at all? why dont you just click "install ubuntu-server" and follow the installer. it is like installing windows xp. just go forward.
[10:40] <k1l> _xer: what iso is that? what distro is that? that is surely not ubuntu
[10:43] <escargotdu25> k1l,  i did what to said to me and let my pc running i have to go to lunch now see you soon
[10:47] <chotaz`w> k1l, package problems aside, my mysql is completly broke, aparrently the socket isn't configured or misbehaving, smth like that
[10:48] <chotaz`w> and I can't type today, that should explain some mysterious problems x)
[10:48] <JNixx_> d/quit
[10:48] <JNixx_> ls -l
[10:53] <yossarianuk> chotaz`w: are you storing your mysql data or logs in a non standard place ?
[10:53] <yossarianuk> if so potentially check apparmor rules
[10:54] <chotaz`w> yossarianuk, sorry, but I'm completly lost with what you just suggested, never had to do much fiddling with MySQL, the upgrade somehow broke and now I'm having a socket connection problem. I've checked /var/run/ and theres  no mysqld folder
[10:54] <scott_> need help getting message saying error:attempt to read or write outside of disk 'hd0' entering rescue mode grub rescue on my Intel Desktop Board D865GLC but not on my hp nc6220 or my ECS GeForce6100PM-M2 and it a usb i want to boot that i made using multisystem
[10:55] <yossarianuk> chotaz`w: 1 I assume you have rebooted after ? I think the pid will now be in /run/ ?
[10:55] <yossarianuk> to check its not apparmor related try
[10:56] <yossarianuk> service apparmor stop
[10:56] <yossarianuk> service apparmor teardown
[10:56] <yossarianuk> service mysql restart
[10:57] <chotaz`w> yossarianuk, Failed to restart mysql.service: Unit mysql.service is masked.
[10:58] <yossarianuk> chotaz`w: ok restart apparmor then
[10:58] <yossarianuk> check the following logs (assuming they exist in 15.04)
[10:59] <yossarianuk>  - /var/log/syslog - /var/log/mysql/error.log - dmesg
[11:00] <chotaz`w> yossarianuk, dmesg | grep "mysql" -> http://paste.ubuntu.com/10877708/
[11:01] <yossarianuk> sorry not 100% sure then - try reinstalling themysql server packages - i.e apt-get --reinstall install my....
[11:04] <Tsterxer> Hi
[11:04] <Tsterxer> Im in ubuntu 64 bit server menu. What to choose: choose-mirror, download-installer?
[11:04] <chotaz`w> yossarianuk, tried that, still "unit is masked" error. here's my syslog |grep "mysql" : http://paste.ubuntu.com/10877713/
[11:05] <chotaz`w> Ima do some googlign in the meanwhile, thanks for the time and input :)
[11:05] <leandro_> GOOOD MORNING
[11:06] <Tsterxer> morning ^
[11:07] <bja> how do I find out the device name of my current controlling terminal for usage with pgrep -t ?
[11:09] <BluesKaj> hmm, vivid security main repo is erroring as a hash sum mismatch
[11:10] <orakar> Would anyone mind mentioning me in a message so I can test my new client? Thanks!
[11:13] <Nooby_One> Looking for someone with some help on the HPLIP program... installed it, but am not able to connect my printer through it
[11:16] <BluesKaj> Nooby_One, does the print manager list your HP printer model ?
[11:16] <Tsterxer> please help
[11:17] <Tsterxer> download-installer or chose-mirror?
[11:19] <Tsterxer> What do I write in domain name?
[11:19] <tijnix> Tsterxer: what medium did you start the installer from?
[11:19] <Tsterxer> tijnix: what do you mean?
[11:19] <Nooby_One> @blueskaj... when i go to device manager and try to setup a device, it does not show any printer
[11:19] <tijnix> Tsterxer: From where do you start the installer?
[11:20] <Tsterxer> tijnix: I put ubuntu sever iso in vmware player.. And click on each line..
[11:20] <tijnix> Tsterxer: the full or the netinstall iso?
[11:20] <Tsterxer> full i think
[11:21] <nogoodnamesleft> How would you use the LVM installer and leave some of the disk unpartitioned? It does not seem configurable. It's a major hassle to resize later if you enable filesystem encryption.
[11:21] <Tsterxer> ubuntu-14.04.2-server-amd64.iso
[11:21] <tijnix> I dont think the full should ask for a mirror or download installer
[11:21] <Tsterxer> :/
[11:21] <Tsterxer> i did mirror
[11:23] <chotaz`w> k1l, still around?
[11:23] <Tsterxer> this is so annoying!!!
[11:23] <Tsterxer> all i try is ubuntu server
[11:24] <chotaz`w> yossarianuk, apparently my mysqld service is masked, I have no clue what that means or how to go around it, what's really puzzling me is not knowing how I got to this situation.
[11:24] <chotaz`w> all I did was upgrade overnight and when I got back to work, mysql was broke as hell
[11:25] <Tsterxer> please
[11:25] <Tsterxer> Only experienced people.
[11:25] <chotaz`w> Tsterxer, are you _xer? What's wrong right now.
[11:26] <Tsterxer> chotaz'w: please are you experienced? I did someone what he told and it's like 20nth reinstall... I struggle install ubuntu server. The mirror install didn't pop up
[11:26] <Tsterxer> I'm _xer
[11:27] <k1l> Tsterxer: please make a screenshot and show exactly where you are and what you try to do.
[11:27] <chotaz`w> Ok first things first, are you willing to start again? If so, tell em where you are trying to install the server and how are you trying to do so. I'm no ubuntu guru, but I've had my share of installations.
[11:27] <k1l> Tsterxer: are you sure you got the standard server iso? and not a pxe boot or netinstall?
[11:28] <Tsterxer> k1l: I did all you said before and you didn't make it better. I think you message me when someone does.
[11:28] <tijnix> ust what i asked :)
[11:28] <Tsterxer> No offense though
[11:28] <Tsterxer> Yes!!
[11:28] <tijnix> Did tons of server installs and never had the questions you had, only on a netinst
[11:28] <chotaz`w> Tsterxer, I'm not familiar with VMWare, if you're willing to try VirtualBox, I might be able to help.
[11:29] <Tsterxer> it told me if you installed from netinst CD and choose not to use a mirror you will end up with base system. Use network mirror?
[11:29] <k1l> Tsterxer: sorry. you cant even verify what iso you are on. i provided a pictured howto for you that is easy to follow. i even tried tha 14.04.2 install in  virtualbox just to make sure there are no bugs. so its all on you not able to follow a easy installer
[11:29] <tijnix> Start fresh with a not-netinst?
[11:29] <Tsterxer> chotaz'w: That's not the software that's the installer. If you said it it's mean you don't have that experienced.
[11:29] <Tsterxer> But I want to install it
[11:30] <chotaz`w> k1l, what can you tell me about "service masking"? Apparently that's what preventing my mysqld from starting, after some short reading, stumbling upon the works systemd and such made me fear that my system might be more broken than just the mysql service, which aparrently is "masked".
[11:30] <k1l> Tsterxer: stop blaming other in here
[11:30] <chotaz`w> Tsterxer, you ahve to be willing to read and understand, what I said is that I'm not experienced with the visualization software you are using.
[11:30] <k1l> Tsterxer: its all your fault. experienced people try to help you. they do a lot of effort. but you are just messing around. so please get the facts straight and verify the questions asked and not just tell people they dont know anything
[11:31] <chotaz`w> s/visualization/virtualization
[11:31] <tijnix> Some help might be found here : https://help.ubuntu.com/community/Installation/Netboot
[11:32] <k1l> Tsterxer: if you cant describe what you do then provide screenshots
[11:32] <thms> LOL @ Ubuntu 15
[11:32] <Mion> vmware should not be used for legal reasons
[11:32] <Tsterxer> I doubt you did it k1l: because the screenshots are outdated( there is more options in 14.04) . I prefer not to talk with you because you like to argue.
[11:32] <bazhang> Mion, thats not something for this channel
[11:32] <thms> New kernel won't make my UX303LA boot, not able to do go terminal ctrl alt f7 just this pink screen and my caps lock key blinking.
[11:32] <k1l> Tsterxer: i just verified the howto myself
[11:33] <Mion> thms: boot to single user mode and read the xorg log
[11:33] <k1l> Tsterxer: verify what iso you are actually using.
[11:33] <bazhang> Tsterxer, they are all volunteers here
[11:33] <thms> Mion: I'll do that later.
[11:33] <Tsterxer> k1l: I pasted it, please .
[11:33] <Tsterxer> k1l: ubuntu-14.04.2-server-amd64.iso
[11:33] <tijnix> What size is the iso?
[11:33] <bazhang> Tsterxer, if you are unwilling to answer basic questions, no help will be forthcoming
[11:33] <Tsterxer> ook at previous chat.
[11:33] <k1l> Tsterxer: what md5sum?
[11:33] <tijnix> haha
[11:33] <tijnix> sorry
[11:34] <k1l> Tsterxer: is it the full install or the netinstall? is it the pxe install? .....
[11:34] <Tsterxer> bazhang: you came now, I answered these questions.
[11:34] <Nooby_One>  @BluesKaj... still there? ... when i go to device manager and try to setup a device, it does not show any printer
[11:34] <Tsterxer> k1l: I don't know about it.
[11:34] <k1l> Tsterxer: still a lot of open questions. but you keep telling people they cant help you
[11:34] <k1l> Tsterxer: so do a md5sum of the iso and look that up
[11:34] <chotaz`w> Tsterxer, Here's the thing. All the prople trying to help you here, using the same software and the same image would only need to pres next next next on the installation, which, by default is supposed to be pretty standard.
[11:34] <Tsterxer> k1l: please stop try "help", I don't wanna argue with you.
[11:35]  * tijnix mumbles something about honey and vinigar
[11:35]  * chotaz`w is shocked.
[11:35] <chotaz`w> I've never seen someone get muted here :x
[11:35] <EriC^> heh
[11:36] <chotaz`w> what can you guys tell me about "service masking"? Apparently that's what preventing my mysqld from starting, after some short reading, stumbling upon the works systemd and such made me fear that my system might be more broken than just the mysql service, which aparrently is "masked".
[11:36] <Nooby_One> anyone with help on HPLIP?
[11:37] <chotaz`w> 'sudo service mysql restart' outs "(...) unit mysql-service is masked" this started happening after having to force purge my mysql package that got broken(half-install) from upgrading
[11:37] <brainwash> chotaz`w: unmask the service then
[11:38] <chotaz`w> brainwash, I just felt uncomfortable with fiddling with systemd, which I know nothing about.
[11:38] <chotaz`w> I'll make some reading
[11:38] <chotaz`w> s/make/do
[11:39] <chotaz`w> brainwash, how can I check if other services are masked?
[11:39] <EriC^> chotaz`w, type ls -l /etc/systemd/system/*mysql*
[11:40] <chotaz`w> EriC^, there's mysql.service in there
[11:40] <EriC^> ok, is it a symlink to /dev/null ?
[11:40] <HoloIRCUser2> Hello. I've tried to upgrade to 15.04 and now I'm in emergency mode and can't boot to the desktop.
[11:41] <EriC^> emergency mode?
[11:41] <escargotdu25> k1l, hi i'm here again
[11:41] <escargotdu25> what should i do now ?
[11:41] <chotaz`w> EriC^, apparently yes. What could have caused this?
[11:41] <EriC^> chotaz`w, that's what masking a service means
[11:42] <HoloIRCUser2> EriC : that's what the console gave me. 'welcome to Emergency mode'.
[11:42] <EriC^> chotaz`w, type sudo rm /etc/systemd/system/mysql.service
[11:43] <EriC^> HoloIRCUser2, hmm did it say why?
[11:43] <BluesKaj> Nooby_One, did you install the hplip with the package manager ?
[11:43] <Nooby_One> I don't recall
[11:44] <chotaz`w> EriC^, I've done multiple reboots and apparently the service is started "masked", does that mean that something else is wrong or removing the symlink will fix it?
[11:44] <BluesKaj> open the package manager/software center and search for hplip, Nooby_One
[11:45] <HoloIRCUser2> EriC: no. Only have me commands to try to boot to default mode, but that doesn't work.
[11:45] <alxk> Hello!After upgrading to 15.04 it seems i cant connect on home wifi(open).The available networks are there but the connection always gets  timed out according to dmesg.Guidance would be really appreciated!Thanks in advance
[11:45] <EriC^> chotaz`w, masking causes a service to not be started when the pc boots, and won't allow you to start it manually either
[11:46] <EriC^> i've no idea why it was masked, maybe someone will know hold on
[11:46] <thms> How do you Flush DNS cache ?
[11:47] <Nooby_One> software center: typed HP and shwed HPLIP toolbox (checked) and "reactivate HP laserjet 1018/1020 after reloading paper" (also checked)
[11:47] <thms> init.d/dns-clean ?
[11:47] <Nooby_One> *showed
[11:48] <chotaz`w> EriC^, http://paste.ubuntu.com/10878030/ apparently the service is being instantly masked
[11:48] <escargotdu25> k1l,  are you still connected ?
[11:49] <EriC^> chotaz`w, was the symlink recreated?
[11:49] <chotaz`w> EriC^, instantly it seems
[11:50] <HoloIRCUser2> Eric^: it also says 'error getting authority : error initialising authority :could not connect : no such file or directory g-io-error-quark, 1
[11:50] <chotaz`w> EriC^, my bad!!! there is not symlink at all but I still get the output that the service is masked when I try to manually restart it. I'm ddoing a quick reboot and see if it helps, can't loose much more time with this as I've already spent my morning around it
[11:51] <EriC^> chotaz`w, try sudo systemctl start mysql.service
[11:51] <chotaz`w> EriC^, still masked
[11:51] <EriC^> nevermind yeah
[11:51] <chotaz`w> and theres not symlink >:(
[12:04] <Mrokii> Hello. I need help. I tried to upgrade from 14.10 to 15.04 and now Ubuntu  doesn't start correctly anymore. I'm being put into a console with a message, welcoming me to ""emergency mode" :-(
[12:05] <EriC^^> there's a bug in the ubuntu installer, it didn't install grub to the ext hdd i specified, it installed to the main hdd
[12:06] <aladiah> iam upgrading from Lubuntu 14.10 to 15, during upgrading it ask me if i want to keep or replace the personalized file config /etc/mime.types   whats is this ? i should rpelace ? what i will lose ?
[12:07] <mlon1> Do my bash scripts have to have all of the methods defined at the top?
[12:07] <EriC^^> mlon1: no, you can do a trick on bash
[12:07] <mlon1> It's kindof ugly when I have many methods to be used in a script -- can't see the actual "script" fr days
[12:07] <EriC^^> main() { func1 func2 } func1() {whatever} func2() {whatever} main "$@"
[12:08] <EriC^^> mlon1: ^
[12:08] <mlon1> EriC^^: ah, I like that
[12:08] <mlon1> thanks
[12:08] <EriC^^> no proble
[12:08] <EriC^^> m
[12:09] <aladiah> EriC
[12:10] <aladiah> Eric^^ personalized file config /etc/mime.types   whats is this ? i should replace it during upgrade from 14.10 to 15.04 ?~
[12:10] <EriC^^> aladiah: i think that specifies what files open with which programs
[12:11] <aladiah> hoo, its only this ?
[12:11] <aladiah> Eric^^ so its better replace it doesnit ?
[12:11] <EriC^^> ah nevermind, it's not, that's something global
[12:11] <aladiah> Eric^^ global ?
[12:12] <aladiah> Eric^^ I will lose somthing important ?
[12:12] <EriC^^> aladiah: it specifies the extension of the file types
[12:13] <SchrodingersScat> not sure if it's recommended, but normally if I haven't personally edited the file, I overwrite it.
[12:13] <aladiah> SchrodingersScat the details it give me is this http://paste.ubuntu.com/10878176/
[12:13] <EriC^^> yeah, i'd do as SchrodingersScat is saying
[12:13] <EriC^^> back it up maybe if you aren't sure if you've modified it or not
[12:14] <aladiah> EriC^^  http://paste.ubuntu.com/10878176/   it ask me to keep or replace ? I should replace for now after backup thats it ?
[12:15] <EriC^^> aladiah: yeah type sudo cp /etc/mime.types /etc/mime.types.backup
[12:15] <k1l> escargotdu25: re
[12:16] <aladiah> EriC^^  ok
[12:16] <k1l> escargotdu25: "pastebinit /etc/apt/sources.list" then please show the link here
[12:18] <aladiah> EriC^^  the command dont work it says
[12:19] <tijnix> sudo apt-get install pastebinit
[12:20] <aladiah> EriC^ it says cp: operating destiny  file missing after /etc/mime.types /etc/mime.types.backup     try cp--help
[12:20] <ubuntu> reza
[12:21] <aladiah> EriC^^ it says cp: operating destiny  file missing after /etc/mime.types /etc/mime.types.backup     try cp--help
[12:21] <Mrokii> Nobody in here who can help me with the Emergency-mode problem after upgrading to 15.04?
[12:27] <Serg_49_rus> всем доброго времени суток
[12:28] <BluesKaj> !ru | Serg_49_rus
[12:32] <Raydiation> hi, currently on archlinux, need some travis ci help :)   where does ubuntu keep the php.ini file when running hp
[12:32] <Raydiation> php -f file.php
[12:34] <Guest56473> Hello, I use sicstus prolog with rlwrap on Ubuntu 14.04 and have to type "rlwrap sicstus .." every time. Is there a way that I can link this command to "sicstus"?
[12:35] <ioria> Raydiation, i got the cli version... is in /etc/php5/cli
[12:35] <Raydiation> ioria: /etc/php5/cli/php.ini?
[12:36] <ioria> Raydiation, yes
[12:36] <Raydiation> ty
[12:36] <ioria> Raydiation, np
[12:37] <EriC^^> is it just me or is there something wrong with the indicators in 15.04? like if you press on the networkmanager indicator, you have to press almost in the dead center again to close it?
[12:38] <ioria> Eric^^ for me is ok, but now i'm with Lubuntu
[12:38] <EriC^^> ioria: ok, unity here
[12:41] <Guest56473> does anyone know how I can link a command to another one with its arguments? Like "sicstus -l test.pl" to "rlwrap sicstus -l test.pl"
[12:41] <ioria> Eric^^  try nm-applet in Terminal
[12:41] <EriC^^> ioria: it's the same for all the icons
[12:42] <gigiubumate> eccomi
[12:43] <gigiubumate> la cosa peggiore di ubu mate e' il menu del grub : scandaloso
[12:44] <EriC^^> i'll try rebooting
[12:44] <ioria> yep
[12:44] <zotherstupidguy> what's the diff bet xserver-xorg and xorg?
[12:47] <EriC^^> nope, still same, you can open it from anywhere on the icon, it just won't close unless you click in the middle
[12:48] <StephenS> I have a small issue with my ubuntu, while I mount my samsung galaxy s4 via usb, I get constant mount/unmount errors
[12:48] <StephenS> occasionally it works, but after 5 mins and then it work for about 2 min in a row without unmount, whats going on?
[12:49] <k1l> StephenS: cable is broken?
[12:49] <StephenS> no its not, its brand new and works fine on windows 8
[12:49] <StephenS> also phone is brand new as well
[12:50] <k1l> look into dmesg what is going on there
[12:50] <EriC^^> StephenS: what's 2+3*1+(1*2)*0 ? :P (it's eeee)
[12:51] <StephenS> k1l can I put paste dmesg on pastebin?
[12:52] <k1l> !paste | StephenS
[12:55] <StephenS> http://paste.ubuntu.com/10878417/
[13:00] <Guest56473> Hello, how can I create my own command in the terminal like "sicstus -l test.pl" should call "rlwrap sicstus -l test.pl" ??
[13:00] <ioria> StephenS, are you sure about the cable ?
[13:00] <StephenS> Yes
[13:00] <StephenS> but just now it worked fine
[13:00] <Guest56473> screen unlocked?
[13:00] <StephenS> yeah
[13:00] <StephenS> next time I get those weird errors Ill come in here
[13:01] <julianofischer> Someone could reset my password, please?
[13:01] <k1l> glad we could help :)
[13:01] <sjoshi> !15.04
[13:02] <k1l> julianofischer: here on freenode? then ask in #freendode
[13:02] <k1l> * #freenode
[13:02] <jeanjack> hi there
[13:03] <Guest56473> hi
[13:03] <jeanjack> I'm making a script which manipulate some $HOME folders, and I need network connexion
[13:04] <tijnix> hi
[13:04] <StephenS> jeanjack ##bash
[13:05] <jeanjack> StephenS: I must initialize network connexion in my script ?
[13:05] <jeanjack> nowhere in ubuntu startup I can put an autostart-script and get network up ?
[13:06] <hateball> jeanjack: you can put things in /etc/rc.local if you need it at boot
[13:08] <jeanjack> /etc/rc.local is executed before network connexion, isn't it ?
[13:09] <StephenS> jeanjack what you want is for ##bash
[13:09] <StephenS> you can check network connection with ping in bash
[13:09] <gigiubumate> exi
[13:09] <StephenS> but there is no way you can tell when will something start on ubuntu, that depends on your hardware etc etc
[13:09] <scrion> Anyone here able to assist getting Ubuntu 14.04 hooked into AD using winbind and the idmap_ad backend?
[13:10] <StephenS> you can do it with symlink > rc.d/ or just put it in cron
[13:11] <jeanjack> my script is in /etc/init.d/rc.local, so I will add wpa_supplicant and dhclient line
[13:11] <jeanjack> thanks anyway StephenS & hateball
[13:12] <nogoodnamesleft> Is there an equivalent to zerofree for ext4? Or do I just cat some repeating stream to a file until the disk fills?
[13:15] <rydzykje> Hey guys, could you help me please. I would like to read 1st line from file which is JAVA_HOME="1.8.0_45" and use just "1.8.0._45" as my variable later how can i do that?
[13:19] <nogoodnamesleft> rydzykje, Err are you in the correct channel? :)
[13:20] <trijntje> rydzykje: head file -n 1 | cut -d '=' -f 2
[13:20] <tijnix> rydzykje: put the file through head -1 | awk -F "=" '{print $2}'
[13:21] <tijnix> i think awk also works with a NR==1 but to lazy to look it up :)
[13:21] <rydzykje> trijntje: thanks!
[13:22] <rydzykje> tijnix: thanks! works <3
[13:25] <geirha> awk -F= '{print $2;exit}'
[13:25] <Latch> Anyone have any clue why Ubuntu keeps shipping with an ancient Squid3 package???
[13:25] <geirha> how ancient is ancient?
[13:26] <Latch> 3.3.8 is acouple of years old.  3.5 has been stable for awhile.  Not only that, but the update to Squidguard 1.5-4 breaks compatibility with Squid 3.3.8
[13:28] <Latch> I had 14.10 set up with Squid 3.3.8 and squidGuard 1.5-2 and it workedlike a charm.  Create the same config on 15.04, copy over the .conf files and I get an error that basically says squidGuard is trying to use a method not supported by the Squid version.  Pffft!
[13:29] <OerHeks> squid3 cane in the debian repos on 2014-08-31
[13:29] <OerHeks> came*
[13:29] <Latch> Only diff is squidGGUard 1.5-4, and changelog says they added stuff to support newer Squid versions and the base is Squid 3.4.  Too bad they only package Squid 3.3.8.
[13:30] <tecnobot_> Hola
[13:32] <cryptz> Hey guys i have a question. I just installed 15.04 on a dell r720 server. I cannot get the system to boot after install unless i choose the recover boot option (it boots ok at that point). If i boot normally the system hangs at: begin: running /scripts/init-premount ... done (most of the time) other times it hangs at begin: running /scripts/local-top ... done. no error is ever given.
[13:32] <OerHeks> Latch, maybe worth a bugreport
[13:32] <cryptz> any idea how i can provide somone with more concrete info from the recovery mode?
[13:33] <loa> cryptz, maybe you can up network there
[13:33] <loa> or use flash drive
[13:33] <nogoodnamesleft> BTW anyone running Ubuntu on jailbroken their chromebooks: i2c_i801 kernel module is blacklisted in Vivid. Unblacklisting it hangs the system. So no trackpads.
[13:34] <nogoodnamesleft> i've had to rollback to 14.04 LTS
[13:34] <cryptz> i cannot do anythign at this point, but if i restart the server and choose recovery boot, and then immediately choose continue normal boot everything is fine
[13:34] <cryptz> just wondering what i could do to gather more info to submit a bug report etc
[13:35] <rydzykje> tijnix: another question, how can I create dir (mkdir) based on result from "head /tmp/release -n 1 | cut -c 15-22" ?
[13:37] <rydzykje> i resolved prob :)
[13:42] <robin_> Hey, do you know when the vivid-kernel will be backported to the lts-repos?
[13:44] <k1l_> robin_: for the .3 pointrelease
[13:44] <k1l_> !enablementstack
[13:44] <colbyf> anyone know how to add bleach bit to the right click menu to delete file/folder
[13:45] <robin_> :(
[13:45] <robin_> okay, then i have to wait. thank you
[13:46] <k1l_> colbyf: no need for bleachbit. just press shift and make full deletion
[13:47] <colbyf> k1l_:will that scrub the file?
[13:48] <colbyf> come from windows background so head thinks like microsft still :)
[13:48] <k1l_> it will not put it into the trash but make a full delete
[13:49] <colbyf> ah ok, got ya
[13:50] <nogoodnamesleft> That won't zero fill the file, if that's what you're asking.
[13:50] <TeckniX> hello - I’m currently running ubuntu 14.09 and can’t seem to stop/restart services. I’m unfamiliar with the runsv / sv setup . Is there a cheat-sheet somehwere?
[13:51] <Vyom|Nix> Sup people... so I recovered all my data of 1 TB recently due to a bug in 14.04.1 which wiped my HDD. Feels great to recover tho. Now I am on 14.04.2 and really want to get a feature to work. So far in vain. Can anyone tell how can I make GTalk and FB integration with Empathy to work? They don't seem to connect.
[13:51] <kostkon> TeckniX, you mean 14.10
[13:51] <kostkon> !upstart | TeckniX
[13:51] <TeckniX> thanks ubottu
[13:52] <TeckniX> I’ll check out the docs
[13:52] <nogoodnamesleft> Vyom|Nix, Interesting bug - which one is it? (Just in case I end up in such a situation)
[13:52] <BluesKaj> colbyf,   I was a windows guy for yrs on the job , but after i got a home pc it only took me a yr to find out about linux, but I had to wait a couple more yrs to setup a total linux pc for my own use, and KDE was very familiar to me as a desktop so i stuck with it ever since
[13:53] <Vyom|Nix> nogoodnamesleft: https://launchpad.net/ubuntu/+source/ubiquity/+bug/1265192 It's resolved in 14.04.2 tho. It wasn't really a bug, but it made me wipe my HDD (formatting the Windows partition too).
[13:54] <nogoodnamesleft> Vyom|Nix, Thanks for info.
[13:56] <jayjo> if I run a shell script that launches a python script, will the script not continue along until that code has completed executing ?
[13:56] <Vyom|Nix> So, anyone able to use FB and GTalk on Empathy on 14.04 or any other version for that matter?
[13:56] <colbyf> BluesKaj:I using Ubuntu and getting on ok, but its a whole new fun learning experience. learning loads :)
[13:57] <BluesKaj> colbyf, well that's good to hear, welcome to the linux experience :)
[13:59] <_war10ck_> I need help with installing libgtk2.0-dev in Ubuntu 12.04
[13:59] <_war10ck_> On trying to install, this error pops : libcairo2-dev : Depends: libfontconfig1-dev (>= 2.2.95) but it is not going to be installed
[14:00] <_war10ck_> Sorry, that was for libcairo, but similar for libgtk2.0-dev too
[14:00] <_war10ck_> Can someone please help me
[14:00] <_war10ck_> ?
[14:01] <yellabs-r2> hello all
[14:01] <jayjo> _war10ck_: jsut install what it asks for then
[14:01] <yellabs-r2> i am seeking enlightment , can you help ?
[14:01] <Latch> Squid3 bug report submitted.  Now we play the waiting game...
[14:02] <gioans> i use ubuntu 15.04, some time my ubuntu crashes, if i changes wifi
[14:02] <_war10ck_> jayjo: I have tried it, but it just keeps giving more and more dependencies - which is, in a nut shell huge.
[14:02] <yellabs-r2> when trying to ge the new 15.04 , i see the 14.04.2 as the download of choice , did something go wrong with the LTS version ?
[14:02] <EriC^^> yellabs-r2: sudo apt-get install e17
[14:02] <yellabs-r2> http://www.ubuntu.com/download/desktop
[14:03] <EriC^^> :P
[14:03] <yellabs-r2> :P
[14:03] <colbyf> i think if you search for it in launch pad it shows the main package
[14:03] <colbyf> when searching for things before this is how I done it or github
[14:03] <_war10ck_> jayjo: This is what I am getting when I am trying install a few packages : http://paste.debian.net/168654/
[14:03] <colbyf> is usually says file ..... is part of .... package
[14:04] <yellabs-r2> is 15.04 stable ? in LTS release cycle terms ..
[14:04] <alnenkl> What's the typical pattern for editing a JSON file in a bash script? Everything seems so kludgey.. (eg sed, awk)
[14:04] <colbyf> its not stable its beta, and I am using it
[14:04] <yellabs-r2> i see, when is the stable release due ?
[14:05] <colbyf> let me check it could be today lol
[14:05] <Vyom|Nix> If anyone send me any message in previous 10 min, plese quote it again. Thanks.
[14:05] <colbyf> ha it was officially released yesterday
[14:06] <yellabs-r2> thats odd , dont you think, the website recommends 14.04
[14:06] <yellabs-r2> when going to http://www.ubuntu.com/ , then follow the download link..
[14:07] <OerHeks> yellabs-r2, get a torrent from http://torrent.ubuntu.com:6969/ , i am seeding a lot https://dl.dropboxusercontent.com/u/6885560/ratio2015.png
[14:07] <yellabs-r2> OerHeks, thanks, its not that i cant get it, its that the website say's a different story
[14:08] <OerHeks> i understand there is a lot of work to be done, just got the delayed Firefox 37.0.2
[14:08] <colbyf> _warl0ck_: try this >> http://askubuntu.com/questions/58202/how-to-automatically-fetch-missing-dependencies-when-installing-software-from-d
[14:11] <_war10ck_> colbyf: Let's see, I am trying -f install with apt-get - once that is done, I will see
[14:12] <gioans> i use ubuntu 15.04, some time my ubuntu crashes, if i changes wifi
[14:12] <yellabs-r2> ah, software, its alway's in beta ( versions )
[14:13] <colbyf> gioans: my advice would be to get the name of the wifi card you use and search for the installation, I have to do that with my wifi its on my next to do list
[14:14] <colbyf> gioans: sometimes it gives you the id of your card in BIOS
[14:15] <colbyf> btw if anyone wants a file/directory shred added to there right click menu run this >> sudo apt-get install nautilus-wipe
[14:16] <ubone> someone stalk me in 5 seconds
[14:16] <petrvs> colbyf: why're you shredding?
[14:16] <petrvs> ubone:
[14:17] <colbyf> I like to shred everything and not normal delete, earlier today was working with pgp keys so wanted to be able to securely delete them
[14:18] <colbyf> plus I am paranoid and follow https://prism-break.org/en/   its how I ended up using Linux
[14:18] <EriC^^> !securedelete | colbyf
[14:18] <yellabs-r2> ubone , i just did the last 5 minutes , did you not notice ?
[14:18] <EriC^^> !secure-delete | colbyf
[14:18] <petrvs> colbyf: hope you're at least using -n 1
[14:18] <petrvs> more than that is a waste of time
[14:18] <EriC^^> ubottu is broke
[14:18] <ubone> seems to be broken, my notify
[14:19] <petrvs> ubone: notify?
[14:19] <EriC^^> !secure-delete trusty | colbyf
[14:19] <EriC^^> !secure-delete | colbyf
[14:19] <colbyf> well I am new so still learning, lol the wiper I am using suggests two wipes for modern hard drives
[14:19] <EriC^^> !secure-delete | trusty
[14:20] <yellabs-r2> colbyf , use etherape ( as root ) and you will be suprised as how many connection your computer makes on the net
[14:20] <colbyf> Eric^^: Gonna check that out now thanks
[14:20] <EriC^^> !secure-delete trusty
[14:20] <EriC^^> colbyf: ok
[14:20] <yellabs-r2> unplug is the safest way LOL
[14:20] <ubone> petrvs: notify-send
[14:20] <petrvs> oh
[14:20] <colbyf> ahhh running away from PC in panic lol
[14:21] <jeanjack> finally i use lightdm login script =)
[14:22] <cassio3> can I monitor the temp of my cpu, even other sensors, from an ubuntu livecd?
[14:22] <chotaz`w> !lmsensors
[14:22] <colbyf> EriC^^: it says secure-felete already installed, I wonder if natutilus wipe use it
[14:22] <yellabs-r2> colbyf, dont worry to much ..
[14:22] <ubone> cassio3: install gkrellm
[14:23] <colbyf> yellabs-r2: on VPN lol, with my tin foil hat
[14:23] <EriC^^> colbyf: it has a bunch of tools, like srm
[14:23] <cassio3> guess I would have to boot off of a usb...
[14:25] <yellabs-r2> have a nice day you all
[14:25] <yellabs-r2> :)
[14:25] <colbyf> don't 4get ur tin foil hat
[14:26] <chotaz`w> k1l_, EriC^^ thanks a lot for your input earlier, I've finally managed to fix my mysql server :))
[14:26] <petrvs> colbyf: there's basically 0 evidence anything more than a single overwrite is anything but an enormous waste of time
[14:28] <colbyf> petrvs: ok, thats good to know lol used to run gutman i think that was 35 lol at least now I am down to 2 wipes :)
[14:29] <petrvs> colbyf: yeah... that's just a great way to spend our tax dollars they figured out, afaict
[14:29] <nogoodnamesleft> colbyf, Are you using disk encryption? The issue with secure erase of -files- is that .. well inodes and SSDs and stuff.
[14:29] <petrvs> well if you use encryption, you don't have to erase
[14:30] <chotaz`w> what is the most secure way I can use to remotely connect to my home server? SSH?
[14:31] <colbyf> no I aint using disk encryption
[14:31] <colbyf> was reading ssds re write to a space that isnt used as much are something like that anyways
[14:32] <EriC^^> chotaz`w: great :)
[14:32] <colbyf> I sometimes use disk encryption to format a hard drive thou, its way faster than other methods I think
[14:33] <petrvs> chotaz`w: yes, ssh
[14:34] <petrvs> colbyf: but disk encryption doesn't format
[14:36] <colbyf> mmm doh lol
[14:36] <marcanuy> Hi, after upgrading to 15.04 I can't connect to my wireless network, this is what syslog says: http://paste.ubuntu.com/10878997/   any idea?
[14:37] <oro> hi all, is there a way where I can extract wpa_supplicant conf values for a NetworkManager connection? I have a problem where setting up wpa2/leap with NM does not connect but with a 4linelong wpa_supplicant.conf it does. I wanna find out what's the difference between the two configurations
[14:38] <nogoodnamesleft> marcanuy, Not entirely sure, but what happens if you turn off the one of IP4 or IP6 that you aren't using?
[14:40] <ioria> marcanuy, wifi it's not working or you can't connect to your lan ?
[14:40] <marcanuy> ioria, I am currently connected to the router with a wired connection, wifi stopped working after upgrade
[14:41] <marcanuy> nogoodnamesleft, how can I do that?
[14:41] <marcanuy> sorry I didn't understand what you mean
[14:42] <nogoodnamesleft> marcanuy, settings, network connections, iP4/IP6 tabs
[14:42] <chotaz`w> petrvs, so the bigger the rsa i setup for my keys, the slower the connection will be, right?
[14:43] <ioria> marcanuy, iwconfig ?
[14:43] <petrvs> chotaz`w: some encryption is more intense and less performant than others
[14:44] <chotaz`w> petrvs, I wanna prioritize security here, but I don't want to compromise speed, is that possible?
[14:44] <petrvs> chotaz`w: if the default way latest stable openssh encrypted things was _remotely_ known to be vulnerable, though, not only would we all know about it, it wouldn't be the default
[14:44] <petrvs> the whole point of openssh is to be secure already
[14:44] <petrvs> by default
[14:44] <petrvs> proactive security is the openbsd motto, practically: http://www.openbsd.org/
[14:44] <jnp> 'sup guys
[14:44] <petrvs> and if it wasn't their's, it'd still be an "unofficial" Unix thing
[14:45] <marcanuy> ioria, http://paste.ubuntu.com/10879067/
[14:45] <petrvs> jnp: suppah
[14:45] <xxnoobsxx> anyone having heat issues with ubuntu on a laptop? under windows 7 it doesnt run as hot as under ubuntu. anyone know how to fix?
[14:45] <jnp> I don't know
[14:45] <jnp> Haven't had those issues
[14:45] <chotaz`w> petrvs, thanks for the insight, I've never used BSD before
[14:45] <LogicalDash> Hey I'm shopping for my next computer and I have the option to make it an x86 tablet with a slot for a SIM card. If I get one of those (Getac T800) and install Ubuntu on it, will I then be able to make phone calls from the device? Or is it just mobile data?
[14:46] <LogicalDash> Or, uh, just a dumb card reader I guess?
[14:46] <ioria> marcanuy, you should't use a passphrase in clear, in any case
[14:46] <ioria> marcanuy, sorry, other matter ... :-)
[14:47] <LogicalDash> This probably isn't a good channel for this question sorry
[14:48] <rydzykje> hello guys, i've added some env variables to /etc/profile and i would like to have them avilable without system restart. How can I restart shell?
[14:48] <ioria> marcanuy, well, we have to test it ... change the ip of wlan0 ... different from eth0 and try to connect  in case use sudo ifup wlan0
[14:48] <petrvs> chotaz`w: openssh is maintained by the openbsd boys, is why I mention it
[14:48] <petrvs> primarily, obviously it has many contributors
[14:49] <chotaz`w> petrvs, I'm guessing the ssh implementation in ubuntu by default is openssh?
[14:50] <petrvs> chotaz`w: yup
[14:50] <chotaz`w> petrvs, a lil chat and i already feel safer, ahaha
[14:50] <petrvs> there are some other ssh implementations, and afaik they all have great track records, too
[14:51] <jody> hey guys
[14:51] <petrvs> but they're more for special use cases, like minimal storage and strange environments
[14:51] <petrvs> jody: heyo
[14:51] <jody> good evening
[14:53] <elux> hello.. im trying to figure out if 15.04 is worth it.. ? i dont care for LXD
[14:53] <elux> feels like an act to try to capture mind-share during this containerization movement.. maybe im not seeing it, but its strange to see this
[14:53] <nullcod3> hell0
[14:54] <petrvs> 'lo null
[14:54] <petrvs> elux: LXD?
[14:54] <nogoodnamesleft> elux, As a user I have noticed some new icons, and that's about it. I had to rollback to 14.04 though on one machine due to a required kernel module being blacklisted.
[14:54] <marcanuy> It disconnected my wired connection :(
[14:54] <elux> i use it mainly on the server
[14:54] <petrvs> nogoodnamesleft: couldn't you unblacklist it?
[14:54] <marcanuy> ioria, http://paste.ubuntu.com/10879067/
[14:55] <marcanuy> nogoodnamesleft, ok I disabled ipv6 without luck so far
[14:55] <petrvs> elux: http://en.wikipedia.org/wiki/The_Legion_of_Extraordinary_Dancers ?
[14:55] <elux> petrvs: https://wiki.ubuntu.com/VividVervet/ReleaseNotes
[14:55] <rydzykje> any ideas why my terminal is closing after some commands?
[14:55] <petrvs> rydzykje: any particular commands?
[14:55] <nogoodnamesleft> petrvs, When loaded, it hangs the machine (it's i2c_801) so I guess there was a reason for it
[14:55] <rydzykje> petrvs: no matter
[14:55] <petrvs> if you say so
[14:55] <nullcod3> guys, does someone know how  i can add resolutions? im stucked on 1024x768 and it's max reso
[14:56] <petrvs> nogoodnamesleft: you can use most any kernel with most any userland
[14:56] <rydzykje> petrvs: scp, chmod etc.
[14:56] <petrvs> including ancient ones
[14:56] <ioria> marcanuy, ok, try to upgede... sudo apt-get update && sudo apt-get upgrade
[14:56] <petrvs> and cutting-edge-r ones
[14:56] <marcanuy> ioria, yes I have already did that
[14:57] <nogoodnamesleft> petrvs, Yes, this machine used to have 14.10 but was using the 3.13 kernel from 14.04 instead of the 3.16 from 14.04. In the end it's too much effort just to get different launcher icons :-)
[14:57] <nogoodnamesleft> 3.16 from 14.10
[14:57] <marcanuy> running it again, just in case
[14:57] <ioria> marcanuy, are you using Broadcom lspci -v | grep Network -A 5
[14:57] <ioria> ?
[14:58] <rust__> hard drive unable to mount.showing a process is in pending!! any idea ?
[14:58] <marcanuy> ioria, Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
[14:58] <halfburnttoast> Hey, is anyone else getting an issue with 15.04 where it constantly is asking for the password to cryptswap? I installed it with the encryption and lvm and, every time I try to restart a service, it asks for the cryptswap password again
[14:59] <halfburnttoast> I've tried this on Ubuntu and Xubuntu 15.04 and it's happening in both
[14:59] <Guest86592> ciao
[14:59] <rust__> hard drive unable to mount.showing a process is in pending!! any idea ?
[14:59] <Guest86592> !list
[14:59] <petrvs> rust__: says what?
[15:00] <halfburnttoast> here it is in action: http://i.imgur.com/VzuDkV7.png
[15:00] <ioria> marcanuy, lspci -v .... search for Network and the string : kernel driver in use:
[15:01] <rust__> petrvs: http://pastebin.com/iAaWGiss
[15:01] <galigan> someone with experience with multimonitor with retina (high dpi) displays?
[15:01] <rust__> petrvs: I have an external toshiba hard drive. Its not mounting properly. afraid to lost data!!
[15:02] <marcanuy> ioria, Kernel driver in use: rt2800pci
[15:02] <Blueking> logrotate and defining maxsize on file size on log files  doesn't seem to work properly ?
[15:02] <petrvs> rust__: unplug it and try a different usb port
[15:03] <nogoodnamesleft> galigan, What's the issue?
[15:03] <petrvs> rust__: if that doesn't work, connect it to a Windows install and fsck it
[15:03] <rust__> petrvs: I tried !!
[15:03] <adot> are questions allowed now?
[15:03] <petrvs> rust__: tried what?
[15:03] <petrvs> adot: ?
[15:03] <rust__> petrvs: no!! let me try
[15:03] <galigan> @nogodnanesleft... not works well for me..
[15:03] <ioria> marcanuy, sudo modprobe -r rt2800pci    and    sudo modprobe rt2800pci nohwcrypt=1
[15:04] <nogoodnamesleft> galigan, I have a massive problem with multi-monitor, but hidpi does work
[15:04] <galigan> If I have two monitors, one withut retina.. It's not working..
[15:04] <SchrodingersScat> !ask | adot
[15:04] <nogoodnamesleft> galigan, I don't know, mine are the same size.
[15:04] <petrvs> rust__: and if none of that works, try ntfsresize -fi /dev/foo#
[15:05] <adot> The install routine for ubuntu does not see my windows recovery partition (D) only C...will I lose it?
[15:05] <petrvs> adot: you can always do manual partitioning
[15:05] <petrvs> adot: and then feel more assured it won't delete things you haven't told it to delete
[15:06] <galigan> I ended up, staying away from my 4k ( resolution) and working at 1920...
[15:06] <petrvs> adot: also, you could backup your recovery partition, which is a good idea anyways
[15:06] <marcanuy> ioria, done it
[15:06] <marcanuy> ioria, iwconfig does not shows the wlan0
[15:07] <rust__> petrvs: error 2 while executing fsck.ntfs for /dev/sdc1
[15:07] <nogoodnamesleft> galigan, They make retina in 4k? what size is it?
[15:07] <galigan> no no
[15:07] <petrvs> rust__: what's that from, ntfsresize?
[15:08] <BornToFlyBert> Hello everybody!
[15:08] <marcanuy> ioria, NetworkManager[13584]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
[15:08] <adot> thank you
[15:08] <rust__> petrvs: ntfsresize -fi /dev/sdc1 ??
[15:08] <galigan> nogoodnamesleft: its not retina ( i don't know) but it supports, 3840x2160
[15:08] <rust__> petrvs: is it right  ?
[15:09] <BornToFlyBert> Is there anybody, who is familar with Ubuntu Server 14.04 concerning startup troubles, if I may ask?
[15:09] <ioria> marcanuy, sudo modprobe -r rt2800pci nohwcrypt=1 and sudo modprobe  rt2800pci
[15:10] <rust__> petrvs: http://pastebin.com/2GnLbWJH
[15:12] <rust__> petrvs: http://pastebin.com/2GnLbWJH
[15:12] <petrvs> rust__: did you try from Windows already?
[15:13] <rust__> petrvs: yeah!! only showing format option!!
[15:13] <petrvs> rust__: no...
[15:14] <petrvs> rust__: you need to fsck it from Windows
[15:14] <petrvs> and please stop with the !'s...
[15:14] <rust__> petrvs: ok!! let me do
[15:15] <tesmo> Just came in for one thing.
[15:15] <petrvs> tesmo: take your time
[15:15] <tesmo> !suggest 15.10 Wobbly Whale
[15:15] <petrvs> heh
[15:16] <Kali_Yuga> hello?
[15:17] <petrvs> 'lo
[15:17] <deadmund> Kali_Yuga: hello
[15:17] <Kali_Yuga> hi
[15:18] <harminuriel> hello, who has some experience with Orca and Mbrola voices? I'm not able to set mbrola voices to use with Orca screen reader
[15:19] <petrvs> can't encourage you enough to use a text browser and text2speech engine instead of trying to convert images into text
[15:20] <colbyf> hi, any idea which program I should use to view all process using the internet and how much they are using
[15:20] <petrvs> colbyf: nettop, maybe
[15:23] <ngochai> Hi guys, why my root is mount as /dev/root? http://pastebin.com/NfTjHEBJ
[15:23] <colbyf> your suggestion put me onto NetHogs :)
[15:24] <jarnos_> Is there any reason why user would want to have both -generic and -lowlatency kernel on same installation?
[15:25] <jarnos_> What about -goldfish kernel?
[15:25] <deadmund> jarnos_: I see no reason not to have the option to choose both.  Please be aware low-latency has a very specific meaning / purpose.
[15:25] <mistralol> so ubuntu 15.04 server crashes about 5-10 minutes after boot
[15:25] <mistralol> anyone any suggestions?
[15:25] <deadmund> jarnos_: -goldfish is for the Android emulator?
[15:26] <Kali_Yuga> irssi -n Kali_Yuga
[15:26] <daftykins> jarnos_: you can only be booted into one at once...
[15:26] <deadmund> mistralol: Look at the logs such as dmesg after rebooting.  Do you get any errors on the screen?
[15:26] <jarnos_> deadmund, I guess so, so it can co-exist with -generic and -lowlatency kernel?
[15:27] <mistralol> deadmund i know enough that the dmesg logs are cleared and the kernel logs from the syslog dont have anything relevent
[15:27] <deadmund> jarnos_: They can all be installed and given as options when you boot.
[15:27] <mistralol> just wondering if anyone else has seen this yet?
[15:28] <jarnos_> daftykins, so it is possible and not dangerous to install e.g. -generic kernel in Ubuntu Studio and boot such a kernel?
[15:28] <deadmund> mistralol: You can look at the logs from the previous boot in /var/log/<ITEM>/ITEM.1.log
[15:28] <mistralol> deadmund yes i know. But they don't contain a kernel opps or anything like that
[15:29] <deadmund> mistralol: Ok, then I don't know :(
[15:29] <mistralol> it just hangs. So logs won't be written anyway. It seems to fall over any time I put any load on the machine
[15:29] <jarnos_> deadmund, I am working on a script that aims to remove some older kernels, but I am confused about what types of kernels I should take into account.
[15:29] <mistralol> deadmund also it does it in a virtual machine as well
[15:30] <mistralol> deadmund but int he virtual machine case VirtualBox just kills its self
[15:30] <daftykins> jarnos_: what exactly do you hope to achieve by playing with kernels?
[15:32] <deadmund> jarnos_: Remove all the kernels except the one you're using?
[15:32] <jarnos_> daftykins, free space on /boot and /, keep only reasonable amount of older kernels and related packages.
[15:32] <deadmund> jarnos_: Maybe leave the "single-user" one just in case?
[15:32] <daftykins> jarnos_: show a pastebin of "ls -al /boot"
[15:33] <jarnos_> deadmund, "single-user"?
[15:35] <deadmund> jarnos_: Isn't there some "recovery" kernel or something?
[15:36] <rydzykje> hey guys, I made a huge mistake with permissions. I can't run a lot of apps so I gave to all directories permisions CHMOD 1777 /* , I would like to go back to DEFAULT Permissions. Is it possible?
[15:36] <daftykins> that was a very, very bad move
[15:36] <jarnos_> deadmund, I don't think so, it is just same kernel booted with different parameters. Of course, if you leave more than one kernel, they can work as recovery kernel, if the newest one fails to boot for some reason.
[15:36] <daftykins> rydzykje: no you cannot, not without painstakingly matching another install for comparison
[15:36] <rydzykje> daftykins: i know... i run one stupid script...
[15:36] <daftykins> rydzykje: what path did you set?
[15:37] <daftykins> a script? wat
[15:37] <rydzykje> daftykins: i was playing with 0755 permissions... and I put by mistake *
[15:37] <zotherstupidguy> is ubuntu server the best minimal ubuntu installation ever?
[15:37] <deadmund> daftykins: I think he just means "the command"
[15:37] <rydzykje> daftykins: later i couldnt run any application
[15:37] <deadmund> script = a single command
[15:37] <rydzykje> deadmund: so i started to give all chmod 1777
[15:38] <daftykins> rydzykje: yes but what path were you in at the time? type "history" to see what you ran
[15:38] <angrywombat> i'm running 13.04 server (i know it's out of support as of January) - i'm having an issue where the machine can't figure out any DNS, but i can ping public IPs.. anyone have any thoughts? tried to install nscd so i could restart it and flush DNS but that won't work because no DNS will resolve, including ubuntu
[15:38] <deadmund> zotherstupidguy: I don't understand the question?
[15:38] <jarnos_> daftykins, deadmund, I have already published such a script, but I am developing it further: http://askubuntu.com/a/571360/21005
[15:38] <daftykins> angrywombat: sorry, we can't in good conscience support an EOL release - upgrade to a supported release then we can talk.
[15:38] <angrywombat> daftykins: i can't because of software dependencies
[15:38] <rydzykje> daftykins: http://pastebin.com/S8F6hUhC
[15:39] <angrywombat> you can't even point me in the right direction with this?
[15:39] <daftykins> angrywombat: nope
[15:39] <angrywombat> wow
[15:39] <daftykins> ragequit.
[15:39] <zotherstupidguy> deadmund i want the least bloated ubuntu installation ever... which iso i should use?
[15:39] <rydzykje> daftykins: but later I've changed chmod 1777 for tmp,opt,var,bin,etc...
[15:39] <daftykins> rydzykje: reinstall time
[15:39] <Enemtee> How do gtk-apps look in Kubuntu 15.04? OK or bad?
[15:39] <rydzykje> cmon rly?
[15:40] <daftykins> yes really.
[15:40] <daftykins> you goofed BIG TIME
[15:40] <rydzykje> fuuuck
[15:40] <daftykins> !language
[15:40] <deadmund> hahah
[15:41] <rydzykje> daftykins: so last question, this command:  find /opt/jdk1* -type d -exec chmod 0755 {} \; will give 0755 only to /opt/jdk* directory yes?
[15:41] <ngochai> Hi guys, why my root is mounted in /dev/root instead of /dev/mmcblk0p2? http://pastebin.com/NfTjHEBJ
[15:41] <agrippaz> i wonder if someone cal help me install AESCrypt? I am following the directions in the documentation, which indicates that once i decompress the tgz file I downloaded from them, I will get a directory, but I do not get a directory, I get a file made of data and I don't know what to do with it. Help?
[15:41] <daftykins> rydzykje: whatever you're doing there isn't right to do ever
[15:41] <agrippaz> all this is command-line by the way
[15:42] <rydzykje> daftykins: what's the right command to give 0755 permisions for the folder?
[15:42] <daftykins> not much point until you reinstall though eh?
[15:42] <agrippaz> "To install the command-line version, you will need the GNU C compiler and the “make” utility." -- does Ubuntu have these?
[15:42] <daftykins> you probably won't even be able to run most commands anymore.
[15:42] <pbx> agrippaz, yes
[15:42] <rydzykje> daftykins: it's a point cause I running this command normaly on my VM not on local... on local I made a mistake
[15:43] <agrippaz> pbx, i had to install "make" via apt-get... you sure?
[15:43] <rydzykje> daftykins: so just tell me what's the correct command to give 0755 for the directory?
[15:43] <nogoodnamesleft> agrippaz, what exactly did you install? ubuntu should have make and gcc as standard
[15:43] <daftykins> rydzykje: i'm saying that you shouldn't need to do that.
[15:44] <daftykins> whatever you're up to, you're going about it wrong imo
[15:44] <rydzykje> daftykins: but after "copy" directory has't correct permissions.
[15:44] <agrippaz> nogoodnamesleft, AESCrypt 3.10
[15:44] <daftykins> rydzykje: why are you copying it and not installing it properly?
[15:44] <nogoodnamesleft> agrippaz, What did you type to install "make" via apt-get?
[15:44] <agrippaz> nogoodnamesleft, i am trying to install it but the directions don't make sense (https://www.aescrypt.com/documentation/AES%20Crypt%20User%20Guide.pdf)
[15:45] <rydzykje> daftykins: java <3 by apt is installed in /usr/lib/jvm/java.... but I want it in /opt
[15:45] <agrippaz> nogoodnamesleft, i get "you already have newest version" because i ran apt-get install make earlier when there was no make
[15:45] <daftykins> why does the path matter?
[15:45] <daftykins> you can't just fight package placements XD
[15:45] <frecel> hello
[15:45] <daftykins> hi
[15:45] <frecel> I have accidentally installed two versions of the same package
[15:46] <rydzykje> daftykins: I can :) im just asking you what's the proper command to set 0755 permissions for the directory, Im not asking for your opinion about that.
[15:46] <Ben64> rydzykje: you seem to not understand that you broke your system
[15:46] <Teduardo> is there a way to query the possible modprobe options for a specific driver, for example i40e?
[15:46] <rydzykje> Ben64: i know i broke my ssystem
[15:47] <agrippaz> nogoodnamesleft, pbx: when I run "tar -xzf aescrypt-x.y.z.tgz" i do not get a directory like the documentation says, I get a file and I don't know what to do with it
[15:47] <Ben64> rydzykje: so it doesn't matter how to set anything to 755
[15:47] <rydzykje> Ben64: but for me it's not important now, I know what kind of mistake I made
[15:47] <daftykins> rydzykje: sorry, your lack of understanding of the topic is what is causing these issues.
[15:47] <rydzykje> Ben64: but I want to set it on my future VM.
[15:47] <frecel> so I'm wondering if there is a way to remove one version of the package and not the other
[15:47] <daftykins> i know you just want a mythical command that'll solve all your problems, but what you're trying to do is wrong to begin with
[15:47] <Ben64> rydzykje: you don't though. you should never have to modify system permissions like that
[15:47] <rydzykje> Ben64: just for one directory under /opt. is it so hard to understand?
[15:48] <rydzykje> Ben64: so im asking how should i, what's the proper command?
[15:48] <Ben64> rydzykje: there is no proper command, because you're doing something that is not proper
[15:48] <nogoodnamesleft> agrippaz, the 3.6 section seems OK. What isn't working?
[15:48] <rydzykje> Ben64: why chaning permissions is not proper?
[15:48] <Ben64> because you'll break things
[15:49] <agrippaz> nogoodnamesleft, when I run tar -xzf aescrypt-x.y.z.tgz, I get a file, not a directory
[15:49] <nogoodnamesleft> rydzykje, What they mean is "tell them exactly what you want to do, and they'll tell you a better way of doing it"
[15:49] <agrippaz> nogoodnamesleft, the documentation states, "This should create a directory
[15:49] <agrippaz> with the same name, but without .tgz."
[15:49] <agrippaz> however I can't cd to the new file, because it is not a directory
[15:49] <agrippaz> it shows up in green on my CLI
[15:50] <ai6pg> rydzykje: I belive it's sudo chmod -R /target_directory - it's dangerous though
[15:50] <rydzykje> ok guys sooo :)
[15:50] <pbx> agrippaz, are you absolutely sure you typed the command exactly as shown? it will create a directory from the tgx
[15:51] <pbx> (tgz rather)
[15:51] <agrippaz> pbx, i tried thrice, but i will try once more now
[15:51] <rydzykje> Ben64: I'm a noob user of Linux Ubuntu and noob user of Ansible. I have to prepare kind of installer of some 3rd part soft e.g JAVA. I want to install Java in /opt/jdk$VERSION but Java installed by APT is installed in /usr/lib/jvm/java.... That's why im moving JAVA folder to /opt and I want to give him this 0755 permissions. Is it clear right now?
[15:52] <agrippaz> pbx, yes, i did it correctly. it decompresses the file but what it decompresses is another file, not a directory
[15:52] <agrippaz> nogoodnamesleft, ^
[15:52] <daftykins> rydzykje: still wrong, sorry.
[15:53] <rydzykje> daftykins: what's wrong? lol. I explained all the stuff I want to do. Reason why is: becuase it's requirement cming from top.
[15:53] <pbx> agrippaz, share a shell session like this. http://dpaste.com/0VX1VXC
[15:54] <agrippaz> pbx, sure just a sec
[15:54] <mistralol> rydzykje read the man pages for chmod, chown, find, xargs
[15:56] <agrippaz> pbx, http://dpaste.com/3YWEPJH
[15:56] <pbx> agrippaz, ah, you're using the wrong file.
[15:56] <rydzykje> time to start the weekend, enjoy your weekend guys. morning monday = reinstall ubnt. thanks and bye bye :)
[15:56] <agrippaz> pbx, aaaahhh! it's the GUI version, isn't it?
[15:57] <pbx> agrippaz, right. and you're following the "Installing on Linux (non-GUI)" instructions
[15:58] <pbx> !root | agrippaz
[15:59] <pbx> oh never mind that, sorry agrippaz. was just wanting to give you the standard advice that working as root isn't generally a good idea
[15:59] <agrippaz> pbx, thanks very much, i'll try to proceed from here. i know root is bad, this is a VM i spun up just to try this package
[15:59] <agrippaz> pbx, stupid mistake on my part. how many times did I type "GUI" without thinking about it :(
[16:02] <agrippaz> have to install gcc now :(
[16:02] <agrippaz> maybe my stripped-down 15.05 includes like nothing
[16:02] <agrippaz> 15.04
[16:02] <mistralol> agrippaz does it run for longer than 10 minutes for you?
[16:02] <OerHeks> agrippaz, wrong approach, instal build-essentials, the metapackage for gcc and tools
[16:02] <OerHeks> !info build-essentials
[16:03] <mistralol> yes it does
[16:03] <OerHeks> !info build-essential
[16:03] <OerHeks> !build
[16:03] <agrippaz> mistralol, ahh, installing build-essential now
[16:03] <agrippaz> done
[16:07] <agrippaz> it seems that i've "make"d it but can't run it
[16:07] <agrippaz> http://dpaste.com/1AVQWYY
[16:08] <trism> agrippaz: you need to add ./ to the front, the current directory is not in PATH
[16:09] <agrippaz> trism, ahh. that has always confused me in linux
[16:09]  * agrippaz goes to read up on PATH
[16:11] <chandru_in> How do I customize the encryption configuration during installation from desktop CD? It works if I choose the defaults, but installer crashes if I try to customize it.
[16:17] <marcanuy> My irc log is full and I've lost the last message the user "ioria" sent to me in this channel, can someone resend it?
[16:18] <agrippaz> to avoid using root, i added a user using adduser, then I logged in, but stuff is all messed up, if I backspace, I get weird characters. why?
[16:19] <OerHeks> !logs | marcanuy
[16:19] <Guest47539> how can I make a new login password if I forgot my old one? Is it possible?
[16:19] <marcanuy> thanks OerHeks
[16:20] <OerHeks> !password
[16:20] <OerHeks> Guest47539, easy job
[16:21] <OerHeks> *unless you have something encrypted ..
[16:23] <denixx> Hi! I have a problem using kubuntu 15.04: When I do "ssh -l user -p 44 -L 8090:localhost:8090 -L 1234:localhost:5900 -R 5700:localhost:5900 my.hostname.org -N" - it opens connection, but when I try to use 5700 at remote computer, it says in local console "WARNING: Server requests forwarding for unknown listen_port 5700". I'll appreciate any help. It looks like some bug.
[16:23] <denixx> I have a brief look at sources of openssh-client, there is channels.c, method "channel_connect_by_listen_address(const char *listen_host, u_short listen_port, char *ctype, char *rname)" tries to do "if (open_listen_match_tcpip(&permitted_opens[i], listen_host, listen_port, 1)) {" and if nothing suits - do this error. I am trying to understand is it a bug somewhere in openssh-client, but do not understand C-things, I am a Java program
[16:26] <rahulprodev> Hello, everyone, Is it ok to install 64bit ubuntu in 2gb ram laptop?
[16:26] <daftykins> it is but it could be a bit wasteful, run 32-bit if you're not planning on upgrading
[16:28] <rahulprodev> daftykins, ok, I think i will upgrade it... 2 days back one port of ram get damaged :(
[16:28] <daftykins> the socket or the module?
[16:28] <rahulprodev> socket.
[16:28] <daftykins> how'd that happen 0o
[16:29] <rahulprodev> don't know I just opened my laptop for cleaning :P
[16:29] <rahulprodev> may be that time... somehow it get damaged.
[16:30] <rahulprodev> after sometime... it start behaving odd... I mean sometimes it works ok, some times laptop get stuck... and when I start fan runs fast and nothing comes...
[16:31] <daftykins> perhaps you damaged it with some static electricity discharge on your person
[16:32] <rahulprodev> hm, atleast other parts are safe :) now working on 2gb ram :(
[16:32] <daftykins> memtest might have something to say about that ;)
[16:33] <rahulprodev> memtest???
[16:34] <rahulprodev> ubuntu takes around 500 mb in normal use...
[16:34] <Cihat_> hello, I have a problem with 15.04 that at every boot fsck checking filesystems. I tried tune2fs to set 20 mount but no change.
[16:34] <daftykins> yeah it tests your RAM
[16:34] <daftykins> hmm very patient there, Cihat_
[16:34] <rahulprodev> got it!
[16:34] <rahulprodev> daftykins thanks
[16:35] <rahulprodev> deftykins, in 2gb - 64bit ubuntu is memory get wasted?
[16:38] <OerHeks> rahulprodev, 2 gb is fine, 1 gb will take more resources
[16:38] <OerHeks> *than 32 bit
[16:39] <daftykins> 64-bit programs will be bigger in size and consume more RAM i'd expect, so it'd be wasteful yeah
[16:39] <daftykins> hence me saying it the first time (:
[16:41] <reborn> What do you have a RAM?
[16:41] <rahulprodev> hm OerHeks , daftykins Thanks...
[16:41] <petrvs> no memory is wasted in GNU/Linux
[16:42] <petrvs> what'd be a waste is using 32-bit software with a 64-bit processor
[16:42] <daftykins> i disagree with that comment
[16:42] <rahulprodev> reborn, I have 4 gb 2 days back but now my one port is damaged so only one port is working and its 2gb
[16:43] <reborn> how about order 2 gb? it cost cheap.
[16:43] <daftykins> the socket is damaged, we're told
[16:43] <petrvs> daftykins: whooptie
[16:43] <daftykins> you could have all the RAM in the world.
[16:43] <nogoodnamesleft> buy larger module, but check the laptop can handle it. they are weird and proprietary.
[16:43] <rahulprodev> reborn socket damaged
[16:43] <reborn> that's problem.
[16:44] <nogoodnamesleft> 2 gig is enough anyway
[16:44] <nogoodnamesleft> if you're just using the laptop for facebook and the odd bit of letter writing
[16:44] <rahulprodev> Is here anyone want to replace 4 gb with 2 rams of 2 gb :P :P
[16:45] <petrvs> 2 is in fact enough for most anything
[16:45] <petrvs> we have very little things we didn't have in the days when 2GB was the consumers' upper limit
[16:45] <reborn> which is the desktop environment you will have it?
[16:45] <ioria> rahulprodev, use pen drive as external ram chaning the priority ? just a thought
[16:46] <rahulprodev> reborn ubuntu 15.04 just installed
[16:46] <zykotick9> ioria: that's funny...
[16:46] <ioria> ^_^
[16:46] <rahulprodev> ioria, pen drive as a ram never tried...
[16:46] <reborn> have a consider about mate?
[16:47] <rahulprodev> mate?
[16:47] <reborn> ubuntu mate
[16:47] <ioria> neither do i.. i think it's just a swap, not use
[16:47] <ioria> sure
[16:47] <rahulprodev> not yet I will check it
[16:47] <ioria> rahulprodev, the problem is changing the priority... i don't know how it affects the ram
[16:48] <rahulprodev> if ubuntu not going me give big issue with 2gb - 64bit then 2 gb is enough for me.
[16:48] <petrvs> it won't
[16:48] <rahulprodev> aha! then it's fine
[16:48] <vitimiti> rahulprodev, I'm using it in a 1.5GB laptop and it goes nicely
[16:48] <rahulprodev> vitimiti, 64bit?
[16:49] <vitimiti> rahulprodev, yes, and UEFI
[16:49] <rahulprodev> vitimiti, hm then I don't need to worry about it.
[16:49] <rahulprodev> I just don't want to lose my another socket. :D :D
[16:49] <ioria>  /proc/sys/vm/swappiness
[16:50] <rahulprodev> I checked
[16:50] <rahulprodev> giving me number: 60
[16:50] <rahulprodev> ioria, what it means?
[16:51] <ioria> you can increase or decrease the use of swap
[16:51] <reborn> laptop or desktop?
[16:51] <petrvs> rahulprodev: that's default, IIRC
[16:51] <ioria> Setting this parameter to a low value will reduce swapping from RAM, and is known to improve responsiveness on many systems.
[16:51] <ioria> quote
[16:51] <joshh20> Is Ubuntu 15.04 a stable release or still beta?
[16:52] <ioria> 0-100 valu
[16:52] <petrvs> http://en.wikipedia.org/wiki/Swappiness
[16:52] <petrvs> the way Linux does swappiness by default is arguably a bit silly
[16:52] <petrvs> though for most people it will never be an issue
[16:54] <rahulprodev> reborn laptop
[16:54] <reborn> oh, that's suck.
[16:55] <rahulprodev> what do you think, what right value I can set of swap so it improve my system?
[16:55] <rahulprodev> ioria
[16:56] <petrvs> rahulprodev: it'll probably be fine with the default
[16:56] <ai6pg> Ubuntu 14.10 is available.
[16:56] <pantato> i like watching things upgrade
[16:57] <rahulprodev> petrvs, ok, I was reading the wiki link you given... it tells about 0, 1, 10, 60 and 100
[16:57] <ioria> no clue
[16:57] <rahulprodev> default will be fine :)
[16:58] <petrvs> it will be fine
[16:58] <petrvs> most people use the default, most people don't even know what swappiness is
[16:58] <petrvs> you don't need to fine tune everything on your first day
[16:58] <petrvs> or perhaps ever
[16:58] <ioria> rahulprodev, you really damaged your ram socket ?
[16:59] <rahulprodev> aha, and I don't want to damage my any other part of laptop... lol.
[16:59] <ioria> right
[16:59] <rahulprodev> ioria yup :) i opened my laptop for cleaning, then i close, and after that it was working fine...
[16:59] <rahulprodev> but in between it get stuck at somepoint and when ever i restart
[17:00] <rahulprodev> only fan starts very fast and no bios comes in no boot.
[17:00] <ioria> fu......
[17:00] <rahulprodev> haha my laptop just overcome from trauma. :P
[17:00] <rahulprodev> first I thought graphic card damaged.
[17:01] <rahulprodev> but after messing with ram I just realized
[17:01] <rahulprodev> my ram socket story :P :P :P
[17:02] <Munchie> hello.
[17:02] <ioria> weel, at the end it's just a socket ... a good technician could change it
[17:02] <rahulprodev> Hii
[17:02] <Munchie> i have a problem. i am hopeing you can help me.
[17:02] <ioria> technician
[17:02] <rahulprodev> ioria, I think vaio socket is difficult to find.
[17:02] <aphid> after an update to 15.04 it boots to black screen text login.. if I do that it lists a few errors that all end in: Read-only file system
[17:03] <rahulprodev> maybe if i find.. then I'll be happy.
[17:03] <Munchie> yes i am a technician.
[17:03] <Guest54815> Hi, wonderful people ! I'm having trouble getting my wifi on an older (2009) macbook air working. Anybody got some knowledge to share ? :)
[17:03] <rahulprodev> thanks, ioria, petrvs and others for help :)
[17:03] <OerHeks> !mac
[17:03] <Munchie> i have a users macbook pro. they lost there entire mac os due to ubuntu desktop error.
[17:04] <Munchie> when you turn there mac  on there is only a folder with a ? on it nothing else.
[17:04] <Munchie> i have tryed to find booting methods  to reinstall but nothing.
[17:04] <aphid> looks like this http://askubuntu.com/questions/613334/ubuntu-15-04-problem-booting-with-systemd
[17:05] <ioria> Munchie, around here should be a mac magician.... i don't remember who, sorry
[17:05] <Munchie> no
[17:06] <Munchie> could you find someone please  i have been at this for ohurs.
[17:06] <Munchie> honestly i hate to tell the customer i can't fix it.
[17:06] <Guest54815> Ok, so Ubuntu does actually suggest a broadcom driver in "addtional drivers", however the wifi does not start working after enabling and rebooting. Any suggestions ? or is there a more appropriate place for me to ask this ?
[17:07] <ioria> bloody broadcom
[17:07] <Guest54815> Yep !
[17:07] <rking> @Guest54815, Have you actually made sure the driver activated.
[17:07] <brainwash> !broadcom
[17:07] <Munchie> ioria if i show you a picture of my problem would that help?
[17:07] <raphus> sometimes you have to select and click apply multiple times until it works
[17:08] <raphus> i had to repeat that 3 times for my macbook air
[17:08] <daftykins> Munchie: so to be sure, you're wanting to fix the OS X install?
[17:08] <Guest54815> @rking not any further than the "additional drivers" application tells me that I'm using the driver.
[17:08] <ioria> he 's coming ,,,,, :)
[17:09] <Munchie> dafty. the mac only shows a folder with a question mark on it and nothing else
[17:09] <daftykins> Munchie: that is not what i asked
[17:09] <wub_wub> Anyone got any idea what could be wrong here: http://i.imgur.com/lIHz9ns.jpg During startup after upgrading to 15.04 xubuntu it just freezes on that point and stays like that
[17:09] <Munchie> yes i want to fix or recover the os x install.
[17:10] <rking> @Guest54815, Do you see the dot next to the additional driver you need. Many times ( on 14.04 ) using any proprietary or additional drivers takes several times for it to actually read it then download and install.
[17:10] <daftykins> Munchie: alright, so have you used the recovery boot keypress after the chime sound?
[17:10] <ioria> Guest54815, have you tried sudo apt-get install bcmwl-kernel-source and then again Add Dri ?
[17:10] <raphus> @rking +1 as i said i needed to repeat that step 3 times
[17:10] <raphus> at MBA 6,2
[17:10] <rking> @Guest54815, Or you can change from "Main" server to "United States" server and alot of times that fixed it not downloading.
[17:10] <Guest54815> @rking Yes the dot is definitely there.
[17:10] <Munchie> wich is  option and c right. yes.
[17:10] <marcanuy> !thanks
[17:11] <rking> @raphus, I know, but there's other ways to fix it and that doesn't always work.
[17:11] <marcanuy> heh
[17:11] <daftykins> Munchie: no it's command+option+R
[17:11] <Munchie> ok i will try it.
[17:11] <Guest54815> @ioria Well, unfortunately I dont have any USB converter thingy to access ethernet. So.. I'm completely offline.
[17:12] <raphus> I read that there is one specific broadcom card which is impossible to get to work with ubuntu 14.04
[17:12] <petrvs> raphus: good story
[17:12] <Munchie> nope still the same thing the folder with question mark.
[17:13] <daftykins> Munchie: so what happened with Ubuntu to allegedly cause this?
[17:13] <Guest54815> @raphus That would be unlucky.. Got the model no of that one ? I believe mine is BCM4321
[17:13] <ioria> Guest54815, it's difficult, then
[17:13] <_war10ck_> Is gcc-5 out for Ubuntu 12.04.5?
[17:14] <Munchie> there was a error wile it was installing.
[17:14] <rking> I've never seen ANY bcm43 that wouldn't work with Ubuntu after some nudging.
[17:14] <rking> and that's with 900+ desktops
[17:14] <daftykins> Munchie: alright boot the ubuntu live session again
[17:14] <Guest54815> @raphus Yes. Maybe I should try 14.04 - have only tried 15.04.
[17:14] <Munchie> then the mac showed up with a folder and question mark.
[17:14] <daniel3_> Is there a new method now to allow X11 to "anyone".  When trying to do dpkg-reconfigure x11-common I get a problem with "x11-common.service is masked."
[17:14] <Munchie> nothing is booting. the only thing bootig is the folder with a question mark.
[17:14] <rking> @guest54815, I would really stick with the LTS releases unless you have the knowledge to fix stuff like that on your own. But I don't know your tech level so ;)
[17:15] <daftykins> Munchie: you have to hold left alt whilst a flash drive or DVD is plugged in, after the chime - to boot another device.
[17:15] <ioria> Guest54815, you don't have ethernet ?
[17:15] <rahulprodev> Hey, anyone please check, I'm getting this error, [3179.708100] usb 1-1.2: device not accepting address 82 error -71
[17:15] <ioria> change the port
[17:15] <Munchie> i did.
[17:16] <daftykins> Munchie: then try again please.
[17:16] <Munchie> do you want me to redownload the installer make flashdrive bootable then try again?
[17:16] <Munchie> ok.
[17:16] <Guest54815> @rking Well I'm a developer and have been running Ubuntu for the past 5 years. So I feel comftable enough around the free world. I just happen to need a cheap laptop, and a refurbished Macbook air seemed like a good investment at the time...
[17:17] <daftykins> Munchie: why doesn't the flash drive still exist from earlier?
[17:17] <Guest54815> @ioria Unfortunately not, no..
[17:17] <OerHeks> _war10ck_, no, http://packages.ubuntu.com/vivid/gcc , but there is a ppa, use at your own risc ( build 1 hr ago ) https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test
[17:17] <daftykins> Munchie: also consider zapping the PRAM to help this situation, the key combo is on the Apple website.
[17:17] <Munchie> because it was the customer that was installing it not me.
[17:17] <rking> @guest54815, Yeah, I know what you mean. Have you tried the recommendations in that help doc !broadcam
[17:17] <ioria> Guest54815, i see, then get a usb eth
[17:18] <Munchie> send link to the keys combo please and thank you.
[17:18] <raphus> @Guest54815 Broadcom BCM43xx 1.0 (7.15.166.24.3) is just fine... thats what my system report/wifi sais
[17:18] <daftykins> Munchie: no.
[17:18] <Guest54815> @rking I think I have, but I'll have another look !
[17:19] <Munchie> i will try the installation myself. right now.
[17:19] <raphus> @Guest54815 did you install ubuntu with network access?
[17:19] <rking> @Guest54815, If not, pm me a little bit later. I have a lot of experience with those issues.
[17:19] <Guest54815> @raphus Broadcom BCM43xx 1.0 (5.10.131.36.16) - appearently not close enough.. ¨
[17:20] <nogoodnamesleft> Guest54815, did you try to usb tether it to your phone, then -fully- update it? That fixed 2015 macbook air wifi for me
[17:20] <Guest54815> @rking Awesome, thanks !
[17:21] <Guest54815> @nogoodnamesleft I did not even think of that ! I'll try that!.
[17:22] <raphus> @nogoodnamesleft @Guest54815 i forgot to mention thats what i did too... apt-get update && apt-get upgrade && apt-get install bcmwl-kernel-source
[17:23] <Guest54815> Great - Will reboot now, and try it out !
[17:23] <raphus> good luck :)
[17:24] <Munchie> king. he mac won't even bring up booting methods. its in limbo with the folder question mark
[17:24] <Munchie> dafty.
[17:26] <daftykins> Munchie: i think you should focus on getting this persons data back from their OS X install first.
[17:27] <Munchie> i have there data. all i need to do is find a installer for the mac.
[17:27] <Munchie> i dont have anything other than a dmg yosemite installer,
[17:27] <daftykins> Munchie: they install their OSs over the internet these days, but only when the recovery partition can be booted. so you might be out of luck
[17:27] <Munchie> i am trying to find a way to boot the file to install the os.
[17:28] <daftykins> taking it to an Apple store might be the easiest if you're near one
[17:28] <daftykins> otherwise you have to convert the dmg to an ISO / img and put that on a flash drive
[17:28] <Abhishek> ubuntu 14.04 not showing up wifi signals ! how to solve this ?
[17:28] <raphus> yeah it helped me too... it was free (back in the snow leopard days)
[17:28] <raphus> *they
[17:28] <Munchie> so your saying that there is no way of fixing this?
[17:29] <brainwash> is this the Apple support channel?
[17:29] <daftykins> brainwash: no i'm just feeling charitable today since allegedly Ubuntu hosted an entire Mac :D
[17:29] <raphus> @brainwash no its the general ubuntu channel
[17:29] <Munchie> after all what ever the error was it was ubuntus installation.
[17:29] <Abhishek> i think wifi drivers are missing or something. how to solve this Dell inspiron 3521 ?
[17:29] <daftykins> Munchie: well zap the PRAM like i said, then boot a live session and we can see what's left of the disk... but i think it's game over, yes
[17:30] <daftykins> Abhishek: check 'additional drivers' for any offers of wifi drivers
[17:30] <Munchie> the disk is empty.
[17:31] <daftykins> Munchie: i'd like to see evidence of that first hand. if you're going by the image, that's wrong
[17:31] <Munchie> if we can find away to get past the question mark folder everything would be so much easyer.
[17:32] <raphus> @all should we launch a channel for ubuntuOnMac support?
[17:32] <daftykins> Munchie: that's the Mac's EFI saying what's on the disk isn't bootable. you don't just *get past it* without following what i've already said :)
[17:33] <OerHeks> from apple https://support.apple.com/kb/DL1433?locale=en_US  recovery disc assistant dmg
[17:33] <Abhishek> daftykins: no wifi drivers are showing up
[17:33] <daftykins> Munchie: so i'm guessing at this point that you tried to let Ubuntu's installer resize the OS X partition?
[17:33] <daftykins> OerHeks: sadly not much help without a working mac to use to put it on a flash drive :)
[17:34] <ioria> Abhishek, try sudo apt-get install bcmwl-kernel-source     reboot and check again
[17:34] <Munchie> no. because i still can't boot from the flashdrive because the combo keys arn't working.
[17:35] <daftykins> Munchie: right but you said you had to redownload Ubuntu before?
[17:35] <OerHeks> Munchie, tried to reset the macbook pro ?
[17:35] <Munchie> is there  specific  buntu iso/ dmg i need to install with mac?
[17:35] <raphus> nope
[17:35] <raphus> the regular one works just fine
[17:35] <raphus> 64bit of course
[17:35] <OerHeks> http://www.wikihow.com/Reset-a-Macbook-Pro
[17:36] <thms> Buying a macbook to install ubuntu
[17:36] <daftykins> i have suggested this OerHeks but Munchie didn't seem to want to look it up, i mentioned PRAM reset
[17:36] <thms> Sell it, buy a dell XPS
[17:36] <thms> Done.
[17:36] <Ocnios> Hello, I have a windows machine I do my day to day work on - I have ubuntu 14 installed on a server, is there a program i can install / use on windows to 'RDP' into Ubuntu?
[17:37] <daftykins> we don't know that that's the story here, but yes it does sound quite futile - thms. less judging might be helpful here however
[17:37] <thms> Even better, go in some street without camera, then simulate someone stealing it, sell it, buy 2 '15 XPS
[17:37] <Munchie> lol thats because i tryed that method already.
[17:37] <petrvs> Ocnios: tigervnc's vncviewer
[17:37] <raphus> @Ocinos use vnc
[17:37] <Munchie> i have been at this for ohurs.
[17:37] <Ocnios> would tightvnc work?
[17:37] <petrvs> Ocnios: yes
[17:37] <Ocnios> aesome, thanks
[17:37] <daftykins> Munchie: well come back once you've booted ubuntu again anyway :)
[17:37] <daftykins> Munchie: otherwise, an apple store is your best bet
[17:37] <raphus> @Ocinos yes, but for that to work you first have to install a desktop-environment of you choice
[17:38] <raphus> i would suggest a lightweight like KDE or XFCE
[17:38] <OerHeks> or the ##apple guys on #freenode ?
[17:38] <Munchie> send me link to download the right ubunto iso for mac.
[17:38] <Ocnios> raphus I'm confused... I have Ubuntu 14 w/ GUI
[17:38] <daftykins> Munchie: ubuntu.com .
[17:38] <Munchie> and i will contact the customer.
[17:38] <huggo> is this the help channel?
[17:38] <daftykins> huggo: yes
[17:38] <raphus> @Ocinos which GUI is on the server
[17:39] <huggo> i got this: 1394 guid are invalid in both cmos and flash
[17:39] <huggo> when i boot up the pc
[17:39] <Ocnios> It's a dell server blade running vsphere so Ubuntu is a VMachine
[17:39] <petrvs> Ocnios: needs more v's
[17:40] <OerHeks> huggo seems like you try to boot from 1394 firewire
[17:40] <raphus> @Ocinos afaik ubuntu-server comes with no gui
[17:40] <huggo> OerHeks :) how?
[17:40] <huggo> oh wait
[17:40] <Ocnios> raphus it's not ubuntu-server
[17:40] <huggo> i wrote on a website that i should use DOS envioment
[17:40] <Ocnios> It's Ubuntu 14 'desktop'
[17:40] <huggo> OerHeks ^
[17:41] <raphus> @Ocinos alright then just install tightvnc. If the tech specs are above 2gb ram and Dual-Core (set for the VM) unity should work just fine over tightvnc
[17:41] <huggo>  but then i thought again, maybe i could use a bash envioment OerHeks
[17:41] <Munchie> dafty what is the recomended usb making method for mac i usally use  yummy but idk if that will work for mac.
[17:41] <raphus> @Ocinos just try apt-get install tightvnc-server if its not performant enough you can still install XFCE or KDE
[17:42] <isaquealves_>  /msg Nickserv identify 16234516
[17:42] <daftykins> Munchie: what OS are you making it from? Windows? i assume you meant YUMI
[17:42] <petrvs> should be fine, although you might have to disable accelerated window effects
[17:42] <petrvs> isaquealves_: bummer man
[17:42] <OerHeks> isaquealves_, time to change password
[17:42] <raphus> xD
[17:42] <Savemech> lol
[17:42] <Munchie> i have yosemite but its in dmg.
[17:42] <OerHeks> https://freenode.net/faq.shtml#changepass
[17:42] <petrvs> isaquealves_: you can set that in xchat's config, so you don't have to do it manually
[17:42] <daftykins> OerHeks: that's not a login but a verification
[17:43] <OerHeks> daftykins, oh, you are right, got triggered by Nickserv
[17:43] <Munchie> but if i am going to install ubuntu on this mac what do you recomend to use for usb booting?
[17:44] <petrvs> are there really special steps for macs?
[17:44] <raphus> there are several ways... i use refind how about you guys?
[17:44] <OerHeks> i thought that installing on a mac was pretty simple , see the mactel pages..
[17:45] <daftykins> Munchie: UUI or YUMI are fine
[17:45] <Munchie> ok. makeing it now
[17:45] <raphus> i thought so too... cuz nearly all googler use macbooks and their goobuntu...
[17:46] <delinquentme> what are documented / known bugs awaiting fixes referred to as?
[17:46] <raphus> i wonder how they survive without the pci-iSight... their meetings are mainly in hangouts i heard
[17:46] <Savemech> guys i got kernel panic, if i do installation on btrfs at 15.04, i think this is not ok
[17:47] <OerHeks> delinquentme, CVE ? http://people.canonical.com/~kernel/cve/pkg/ALL-linux.html
[17:47] <xubuntu_> ubuntu中文频道是那个
[17:49] <OerHeks> Savemech, there are known issues with btrfs https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1445252
[17:49] <isthisreallife> hi
[17:49] <petrvs> isthisreallife: 'fraid it is
[17:49] <petrvs> xubuntu_: #ubuntu-zh, IIRC
[17:49] <petrvs> xubuntu_: make that #ubuntu-cn
[17:49] <isthisreallife> why i get the software on this computer is up to date when i run sudo update-manager -d
[17:50] <isthisreallife> i have 14.04
[17:50] <isthisreallife> and would like to upgrade to 15.04
[17:50] <daftykins> isthisreallife: because you should never run that. you have to update to 14.10 first :)
[17:50] <isthisreallife> hmm
[17:50] <isthisreallife> how?
[17:50] <EriC^^> sudo do-release-upgrade
[17:50] <raphus> or just clean-install... its the best choice in any case
[17:50] <petrvs> ...
[17:50] <isthisreallife> EriC^^ i did run this command
[17:51] <isthisreallife> and i still have 14.04
[17:51] <OerHeks> isthisreallife, the -d(evelopment) option should lead you to 15.10 , only when you have 15.04
[17:51] <wub_wub> Hey guys, could someone point me in the right direction on how to solve this: http://i.imgur.com/lIHz9ns.jpg  I can't start my xubuntu install after "upgrading" to 15.04
[17:51] <EriC^^> isthisreallife: type grep Prompt /etc/something/something
[17:51] <EriC^^> isthisreallife: /etc/update-manager/release-upgrades
[17:52] <OerHeks> wub_wub, hold shift@boot to boot in recovery?
[17:52] <isthisreallife> grep Prompt /etc/update-manager/release-upgrades
[17:52] <isthisreallife> Prompt=lts
[17:52] <isthisreallife> ?
[17:52] <EriC^^> yeah change lts to normal
[17:52] <isthisreallife> what do i need to type?
[17:52] <wub_wub> OerHeks, that works, but I'm not able to find out how to fix the issue and boot into normal environment
[17:53] <EriC^^> sudo nano /etc/update-manager/release-upgrades
[17:53] <wub_wub> I think it has something to do with systemd and networking, but I'm not 100% sure
[17:53] <wub_wub> In hindsight I probably shouldn't have upgraded...
[17:53] <isthisreallife> okay
[17:53] <isthisreallife> changed to normal
[17:53] <isthisreallife> now what
[17:53] <EriC^^> sudo do-release-upgrade
[17:54] <EriC^^> you mean in nano? ctrl+o saves ctrl+x to exit
[17:54] <isthisreallife> yep
[17:55] <davegarath> Hi all, I've a problem with audio. with alsamixer I found channel speaker to 0 I have to make louder this channel to hear something. but after reboot speaker is back 0. I run sudo alsactl store but it seams not work
[17:55] <davegarath> I use ubuntu 14.04
[17:56] <isthisreallife> http://pastie.org/10112063    EriC^^
[17:56] <isthisreallife> i guess something went wrong
[17:57] <ioria> isthisreallife, ppa maybe... do you have them       ?
[17:57] <EriC^^> isthisreallife: comment out the ppa's in /etc/apt/sources.list.d/
[17:58] <Ocnios> what does 'nano' do/mean? ex: nano ~/.vnc/xstartup
[17:59] <EriC^^> isthisreallife: sudo sed -i 's/^/#/' /etc/apt/sources.list.d/*
[17:59] <daftykins> it's a text editor
[17:59] <daftykins> Ocnios: ^
[17:59] <xangua> the best would be to complety remove the PPA and packages
[17:59] <xangua> !ppa-purge
[17:59] <EriC^^> isthisreallife: ^ xangua 's comment
[18:00] <Munchie> i see what is going on my customer didnt have proper internet and the iso for ubuntu didnt finish. so i am  going to re download this iso and try to see if everything gets fixed then. i will let you know when this is done dafty then you can walk me threw the boot/ install process. =)
[18:00] <UbuntuInstaller> Hi
[18:00] <EriC^^> maybe save whatever you need, and try reinstalling after the update isthisreallife
[18:00] <isthisreallife> so id lost any data?
[18:00] <ioria> isthisreallife, in any case,   grep Broken /var/log/dist-upgrade/apt.log  says something ?
[18:00] <warus> Дайте на Русский канал
[18:01] <daftykins> Munchie: no thanks!
[18:01] <isthisreallife> yes
[18:01] <ioria> yes what  ?
[18:01] <UbuntuInstaller> I managed to create an Ubuntu USB stick but when I boot into it it just behaves like an installer rather than an installed operating system.
[18:01] <EriC^^> isthisreallife: it would remove all the config's of the package i guess
[18:01] <isthisreallife> http://pastie.org/10112075
[18:01] <daftykins> Munchie: you can't just go ahead and install, a Mac won't boot with only Ubuntu on the disk. It needs at least one OS X volume afaiui
[18:01] <warus> #ubunturu
[18:01] <UbuntuInstaller> I managed to create an Ubuntu USB stick but when I boot into it it just behaves like an installer rather than an installed operating system.
[18:01] <UbuntuInstaller> oops
[18:01] <EriC^^> UbuntuInstaller: that's what it does
[18:01] <isthisreallife> ioria ^
[18:02] <EriC^^> UbuntuInstaller: how did you create the ubuntu usb?
[18:02] <warus> ##ubunturu
[18:02] <Munchie> then how do i get this?
[18:02] <UbuntuInstaller> EriC^^, I created it from the Ubuntu DVD I think
[18:02] <UbuntuInstaller> It was a while ago
[18:02] <warus> дайте на русский канал
[18:02] <EriC^^> UbuntuInstaller: what do you mean?
[18:02] <warus> ссылку
[18:02] <OerHeks> installer/live mode: you have to select keyboard language etc. first, that is normal.
[18:02] <master_> Hi
[18:03] <UbuntuInstaller> EriC^^, You boot into the live cd and then there is an option to create a usb
[18:03] <UbuntuInstaller> I think I used startup disc creator, maybe that was wrong
[18:03] <EriC^^> UbuntuInstaller: that just creates a startup usb that installs ubuntu
[18:03] <UbuntuInstaller> EriC^^, OK so I need Ubuntu Ubuntu!
[18:04] <EriC^^> UbuntuInstaller: you have to click on install ubuntu, and select the usb in the manual partitioning
[18:04] <EriC^^> also select where you want the bootloader to be installed
[18:04] <EriC^^> so you don't overwrite the one on your hdd
[18:05] <UbuntuInstaller> EriC^^, I looked into that but then I thought I'm trying to install it to SDA6 (usb) but I'm booted into SDA6 - "right now", won't this cause a problem?
[18:05] <EriC^^> sda6 is not the usb.. i dont think so
[18:05] <ioria> isthisreallife, well, purge ppa and you should sudo apt-get remove those  packages
[18:05] <EriC^^> UbuntuInstaller: are you booted in the live usb right now?
[18:05] <devios> weird question for you all: i want to download the package lists from a number of cydia repositories (jailbroken iphone apps) on my ubuntu system - any suggestions for how to accomplish this?
[18:05] <UbuntuInstaller> EriC^^, Other PC
[18:05] <UbuntuInstaller> But yes
[18:06] <EriC^^> UbuntuInstaller: ?
[18:06] <UbuntuInstaller> USB is on laptop but booted up now yes
[18:06] <EriC^^> ok, you can't install to the usb while it's booted
[18:06] <EriC^^> you have to either boot the .iso from grub, or make another live usb/cd
[18:07] <UbuntuInstaller> EriC^^, Yeah I think I just need to move it to the ubuntu on PC and do it there.
[18:07] <isthisreallife> ioria what commands do i need to run?   sudo add-apt-repository --remove ppa:whatever/ppa
[18:07] <isthisreallife> ?
[18:07] <UbuntuInstaller> EriC^^, Thanks
[18:07] <EriC^^> UbuntuInstaller: no problem
[18:07] <SCHAAP137> greetings, homies
[18:07] <wub_wub> okay, one last shot before I give up - does anyone have any idea on how to fix this issue http://i.imgur.com/lIHz9ns.jpg so that it'll continue with booting and not freeze on that point
[18:08] <SCHAAP137> anyone else running MATE in 15.04, and noticing that the notification tray icons don't align/center automatically?
[18:08] <UbuntuInstaller> Everything I do these days is a reality inside a reality inside a reality.
[18:08] <EriC^^> isthisreallife: ppa-purge <package>
[18:08] <SCHAAP137> need to change the panel size to force them into aligning properly
[18:08] <SCHAAP137> each time
[18:08] <EriC^^> isthisreallife: it'll remove the ppa and it's configs i think and try to install whatever is in the repos
[18:09] <UbuntuInstaller> Cheers seeya
[18:09] <ioria> isthisreallife  sudo apt-get purge package_name
[18:09] <xangua> repository/name actually
[18:10] <ioria> isthisreallife, a sec,,, please4
[18:10] <isthisreallife> :)
[18:11] <ioria> isthisreallife, sudo ppa-purge ppa:repository-name/subdirectory     but i think you need to install  ppa-purge
[18:14] <isthisreallife> so how do i know what packages to uninstall?
[18:14] <isthisreallife> all of them?
[18:14] <finetundra> has anyone gotten any ubuntu flavor to work on an IBM eServer xSeries 225 type 8647?
[18:16] <daftykins> isthisreallife: what's this, you have PPAs enabled?
[18:16] <daftykins> !ppapurge
[18:20] <ubh> hi all! I need help with 15.04 server for connect to my wifi via cliluw .
[18:20] <ubh> hi all! I need help with 15.04 server for connect to my wifi via CLI.
[18:21] <ubh> followed "3.2" section here---> http://bernaerts.dyndns.org/linux/74-ubuntu/230-ubuntu-setup-wifi-commandline
[18:21] <MonkeyDust> ubh  wifi with a server is not wise... and it's better to stick with LTS for servers
[18:21] <ubh> but not success
[18:21] <ubh> hi MonkeyDust: my laptop has eth broken, so only wlan0 is working an the server is a hobby-home project ;)
[18:21] <ubh> *and
[18:22] <King_DuckZ> hello, I'm trying to watch a bluray using vlc, I followed this http://askubuntu.com/questions/140080/playing-blu-ray-using-vlc but I get an error like "bluray error no valid key found in the aacs configuration file"
[18:24] <raphus> hav you installed ubuntu-hidden-features?
[18:24] <daftykins> King_DuckZ: not so sure about VLC usage, but certainly makemkv will help what you're trying to do.
[18:26] <King_DuckZ> daftykins: isn't it to rip movies?
[18:26] <daftykins> King_DuckZ: not anymore
[18:26] <daftykins> that's all i can say ;)
[18:29] <King_DuckZ> daftykins: it's not in the repository, is it?
[18:30] <daftykins> King_DuckZ: no
[18:31] <King_DuckZ> ah nvm I just found this http://wiki.ubuntu-it.org/Multimedia/Video/MakeMKV
[18:31] <King_DuckZ> looks promising
[18:32] <ubh> No one?
[18:33] <raphus> @ubh did you try this?: http://askubuntu.com/questions/294257/connect-to-wifi-network-through-ubuntu-terminal
[18:41] <plinio> plosionirc.net
[18:42] <SineDeviance> hi. i tried to install ubuntu 15.04 and my house burned down. i tried removing it from the hospital bed in the burn ward, but it seems you can't uninstall evil. is there a priest available?
[18:43] <creinke> So, I upgraded two machines to Vivid yesterday -- today I find them both complaining "No space left on device".  Both of them have a huge file at "/var/lib/apt/lists/partial/security.ubuntu.com_ubuntu_dists_vivid-security_main_source_Sources.bz2" -- apparently as large as the filesystem has space for.
[18:43] <MonkeyDust> SineDeviance  find more jokes in #ubuntu-offtopic
[18:43] <SchrodingersScat> !ot | SineDeviance
[18:43] <ioria> SineDeviance, what's up ?
[18:44] <EriC^^> SineDeviance: well, :D
[18:44] <SineDeviance> if no priest is available, i
[18:44] <SineDeviance> i'll* gladly accept a techromancer
[18:44] <SineDeviance> :D
[18:44] <SineDeviance> sorry guys, had to
[18:44] <SineDeviance> carry on!
[18:45] <eggbeater> MonkeyDust: is that even a channel?
[18:45] <SchrodingersScat> eggbeater: quite
[18:46] <ioria> SineDeviance, 15.04 it's not properly a lts ... 16 will be i heard
[18:46] <EriC^^> SineDeviance: what exactly blew up?
[18:48]  * creinke assumes he can delete this file.
[18:52] <Nooby_One> hello
[18:52] <Nooby_One> looking for some help with HPLIP in ubuntu 14: my printer does not show
[18:53] <MonkeyDust> eggbeater  is what a channel?
[18:54] <ioria> Nooby_One, try sudo service cups restart
[18:55] <Nooby_One> @ioria... i just type in terminal what you typed there? just copy/paste?
[18:55] <ioria> Nooby_One, yes
[18:55] <stacks88> Running ubuntu server 14.04.2, so i ran apt-get update;apt-get upgrade and a few of the packages it wants me to update are: mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 and so the problem right now is my guy is running some mysql tasks that are putting the mysql processes to work, using up cpu etc. I don't want to interrupt or have
[18:55] <stacks88> mysql be restarted, screwing up any potential progress or stuff hes doing. So ive been holding back on upgrading those packages. my question is: How can i find some sort of release log, change log, or somewhere to find out the importance of these packages? like what if the reason why ubuntu wants to upgrade these packages are due to some security update? How would i even know? It just says The
[18:55] <stacks88> following packages will be upgraded:, so i thought maybe there is a URL or site or place i can go to , to read about what is different in these new mysql packages or upgrades, or to determine if i can hold off a bit longer or not. any ideas?
[18:56] <Nooby_One> ok
[18:56] <Nooby_One> done
[18:56] <Nooby_One> now?
[18:56] <ioria> Nooby_One, check if hp shows,
[18:57] <Nooby_One> nope, still no devices found
[18:57] <OerHeks> Nooby_One, what hp printer exactly?
[18:57] <Nooby_One> hp deskjet 5525
[18:57] <Nooby_One> however, the problem might actually be with the printer as supposed to ubuntu
[18:58] <ioria> Nooby_One, is it up ?
[18:58] <Nooby_One> @oerheks... just a personal question... seen you around here a few times... just by the name... Nederlander of Belg? ;)
[18:59] <Nooby_One> @ioria... yes, printer is turned on
[18:59] <Nooby_One> wifi light is lit as well
[18:59] <OerHeks> https://help.ubuntu.com/community/HpAllInOne
[19:00] <ioria> Nooby_One, sudo hp-setup
[19:00] <ioria> Nooby_One, wifi not usb ?
[19:00] <Nooby_One> @oerheks... the problem with your link is the first line: connect usb cable, mine came without :s
[19:01] <Nooby_One> @ioria... same thing, no devices found
[19:01] <OerHeks> Nooby_One, oh, you need one to setup, AFAIK
[19:01] <ioria> Nooby_One, wifi is working ?
[19:01] <Nooby_One> i'm on wifi on the laptop, and the printer wifi light is lit up as well
[19:02] <Nooby_One> @oerheks, there was no cable with purchase, it was a wifi setup
[19:02] <ioria> Nooby_One, that thing should have the wifi configuration on it
[19:03] <ioria> Nooby_One, SetoUp button
[19:03] <Nooby_One> @ioria, do you mean the settings on the printer?
[19:03] <ioria> Nooby_One, yep, if it's wifi
[19:03] <xangua> you first need to connect the printer to your wifi
[19:04] <Nooby_One> @ioria... looking for it
[19:04] <Nooby_One> @ioria, what do you need?
[19:05] <Nooby_One> i have printed an info sheet
[19:06] <ioria> Nooby_One, well, if it's wifi, it's like a pc... should visualize a Network...  an A.P., a router
[19:07] <Nooby_One> @ioria... there are many numbers, names, etc... can you be more specific in what you need to know? ip? DSN? ...?
[19:08] <ioria> Nooby_One, press SetUp and move keys looking  for wifi Network...    it's the first installation ?
[19:09] <Nooby_One> no, it used to work (but not within HPLIP, but stand alone in ubuntu) however, for some reason it stopped working on my dualboot laptop both in win and ubuntu, even after a factory reset
[19:10] <Nooby_One> according to the touchscreen wireless and wireless are on
[19:10] <ioria> Nooby_One, if you have the Manual scroll to wireless network
[19:11] <Nooby_One> however, the IP page of the printer says that i am connected to a network, but not to the internet... :s
[19:11] <ioria> Nooby_One, you have entered the passphrase ?
[19:12] <Nooby_One> you mean password? yes
[19:14] <ioria> Nooby_One, and in Ubuntu, from printers - Add you can find anything ?
[19:15] <trippel> I just installed a copy of Ubuntu Mate 15.04 and found eth0 not being specified in /etc/network/interfaces Is that correct that way?
[19:15] <Nooby_One> yes, from printers it is on the list and testpage is printing
[19:15] <Nooby_One> i think the problem is the printer itself
[19:16] <Nooby_One> is it normal to have 0.0.0.0 as DSN?
[19:16] <ioria> Nooby_hp-makeuri IP-ADDRESS
[19:17] <Nooby_One> ???
[19:17] <thms> Is auth_basic a custom module ?
[19:17] <Nooby_One> sorry, ioria, don't know what you mean now
[19:17] <thms> nginx: [emerg] unknown directive "auth_basic_user" in /etc/nginx/nginx.conf:41
[19:19] <Nooby_One> just for your info... if i suddenly don't answer is because i fell out of energy... there's quite a storm going on here, and it is custom to fall without energy
[19:19] <Nooby_One> @ioria... what do you mean with "hp-makeuri IP-ADDRESS"?
[19:20] <MadWasp> hi guys, i'm having quite some problems with my graphics card. i just recently installed ubuntu and the driver from their website does not work. it's ati radeon hd4850 x2
[19:20] <brunch875> Looks like hard drive failed :( computer boots to grub rescue. Just in time to install the new 15.04! Problem is liveUSB kernel panics when trying to mount root fs.
[19:20] <brunch875> Does anyone know how I can delete all partitions?
[19:21] <Guest45254> when xubuntu will release xfce 4.12 for xubuntu 14.04 lts
[19:21] <Nooby_One> welcome back ioria... what did you mean by "hp-makeuri IP-ADDRESS" ?
[19:22] <ioria> Nooby_One, it's the uri of the printer
[19:22] <gr4> hi guys
[19:23] <Nooby_One> i'm sorry, i don't get it? do you want me to give it to you, or do you want me to do something with it? i guess you're talking about the IP?
[19:24] <ioria> Nooby_One, yes, but try first sudo hp-check -r
[19:26] <MadWasp> can somebody help me with my graphics driver?
[19:26] <daftykins> not until you give details :)
[19:26] <Nooby_One> @ioria... is this the pastebin? http://pastebin.com/ftNwYkJG
[19:26] <MadWasp> it's a hd radeon 4850x2
[19:26] <MadWasp> and i'm running 14.04
[19:27] <MadWasp> i alrdy tried the drivers from the amd page
[19:27] <MadWasp> but that only crashed my xserver
[19:27] <daftykins> your card has moved to legacy status because it's too old and AMD dropped support, there is no choice beyond the open source driver 'radeon'
[19:27] <MadWasp> where do i get that one?
[19:28] <daftykins> you can't use it with any supported ubuntu versions
[19:28] <ioria> Nooby_One, you have reintall cups, i think
[19:28] <Nooby_One> cups??
[19:28] <daftykins> MadWasp: basically your choice is to either run the default driver, upgrade, or run another OS
[19:28] <MadWasp> upgrade my card?
[19:28] <daftykins> yes
[19:28] <MadWasp> what if i choose an old version of their driver?
[19:28] <MadWasp> the card is still pretty good
[19:28] <ioria> Nooby_One, yes, it's the main  printing system on linux
[19:29] <daftykins> MadWasp: like i just said twice, you can't use any driver with currently supported Ubuntu versions :)
[19:29] <daftykins> 12.04.1 was the last version the legacy driver worked with
[19:29] <MadWasp> that sucks
[19:29] <daftykins> yep you have AMD to thank there
[19:30] <MadWasp> what about this 2d driver from the appstore?
[19:30] <daftykins> no idea what you're referring to there
[19:30] <ioria> Nooby_One, sudo apt-get update and sudo apt-get install cups
[19:30] <Nooby_One> but i can print from ubuntu...  it is just that it does not show up in HPLIP, and on the webpage using my printer's IP there's a problem with the DSN
[19:30] <MadWasp> daftykins: "binary ati-x.org driver"
[19:31] <Nooby_One> doing the update as we speak
[19:33] <ioria> Nooby_One, "warning: ubuntu-14.04 version is not supported. Using ubuntu-13.10 versions dependencies to verify and install..."
[19:33] <ioria> Nooby_One, i don't believe it
[19:33] <Nooby_One> @ioria... what are you referring to? cups or HPLIP?
[19:34] <ioria> Nooby_One, the output of  hp-check -r
[19:34] <testrio> Hi guys how can i change my kernel ?
[19:34] <testrio> the easy way to do that ?
[19:35] <daftykins> testrio: shouldn't need to.
[19:35] <eggbeater> testrio: Update it. Or pick an older one from the GRUB list
[19:35] <daftykins> MadWasp: you can try but i'm pretty sure bad things will happen
[19:35] <Nooby_One> ok?
[19:35] <testrio> i have 3.19 i want 3.18
[19:35] <ioria> Nooby_One, "warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  14.04 version "
[19:36] <eggbeater> testrio: Try picking it from Grub's boot list when you start up.
[19:36] <ioria> Nooby_One, i don't believe it  again
[19:36] <testrio> ok
[19:37] <ioria> Nooby_One, installed cups ?
[19:37] <MadWasp> daftykins: so, 300€ to use ubuntu? :D
[19:37] <Nooby_One> http://localhost:631/admin ioria... do you know this page? HP is directing me to it
[19:38] <cliebow> cups
[19:38] <ioria> Nooby_One, add Printers  is very promising ...
[19:39] <daftykins> MadWasp: pretty sure you can already use it with the open source 'radeon' driver, or you could just avoid unity (the ubuntu desktop environment) and try something else like ubuntu MATE / xubuntu
[19:39] <Nooby_One> when clicking add printer it asks for a username
[19:40] <MadWasp> daftykins: it does work, firefox is pretty laggy and doesn't play videos
[19:40] <ioria> Nooby_One, should be 'admin' 'admin' ...   but it's your router :-)
[19:40] <MadWasp> daftykinds: so if those problems start 30 minutes after installing, i'm guessing there will be more coming
[19:40] <daftykins> MadWasp: what kind of videos?
[19:40] <Nooby_One> so, the password and name of my homenetwork?
[19:40] <MadWasp> daftykins: just regular youtube
[19:41] <daftykins> MadWasp: does the HTML5 player work at all? or is this after putting the ancient flash v11 on?
[19:41] <ioria> Nooby_One, yep
[19:42] <MadWasp> daftykins: uses flash
[19:42] <basso> Flosh is tha best
[19:42] <basso> Adobo flosh playah
[19:42] <Nooby_One> no, it is not the name of my network and it's password
[19:43] <daftykins> MadWasp: try without so it uses the HTML5 player, but i think you won't find much success. if you were planning on gaming that card is a game over
[19:43] <ioria> Nooby_One, if you type the ip of your router in browser you should have the same window
[19:44] <OerHeks> name would b ssid /
[19:44] <ioria> Nooby_One, those are the username and passwd
[19:44] <MadWasp> daftykins: works on windows, the only games i planned would be like a bit of LoL or starcraft II, but i could switch to windows for that. i'm mainly using it for programming and daily business
[19:44] <Nooby_One> so, how to find what i need?
[19:44] <daftykins> MadWasp: ah not such a bad situation after all then. try chrome also to see if resolves your issues
[19:45] <SchrodingersScat> MadWasp: I try to use youtube-dl and mpv to avoid actually loading a youtube page, idk if that helps
[19:45] <MadWasp> would you recommend nvidia for long term use?
[19:45] <MadWasp> i don't wanna run into this situation again
[19:45] <ioria> Nooby_One, try first admin admin ... if not working you set up different credentials
[19:46] <ioria> Nooby_One, or look OerHeks above
[19:46] <MadWasp> daftykins: i just bought an ssd to run ubuntu on it, might as well buy a card then. nvidia or amd?
[19:46] <daftykins> nvidia i would say
[19:47] <daftykins> well we can't predict who is going to chop off older cards, they all do it really
[19:48] <MadWasp> daftykins: k, at least it got my other hardware :D
[19:48] <ruth> Something happened and we get an extra tab everytime we get on firefox. This is the tab, and we cannot figure out how to get it off. chrome://spdlmovies-a/content/newtab/newtab.html
[19:48] <daftykins> ruth: check your extensions for anything you don't recognise, ctrl+shift+A
[19:49] <Nooby_One> the SSID from my printer? that says HP-Print-B5-Deskjet 5520 series, it also shows up in my network list, however, i do not have a password for it
[19:49] <harminuriel> Hello, can someone help me? I'm going mad, is it possible to use mbrola voices with the Orca screen reader?
[19:50] <ioria> Nooby_One, SSID it's the name of your Lan
[19:50] <Nooby_One> so, the name of my homenetwork then? that i tried alreade, it did not work
[19:50] <Ocnios> does Ubuntu 14 Unity (desktop not server) accept SSH incomming by default?
[19:51] <k1l_> Ocnios: no
[19:51] <ioria> Nooby_One, the password (passphrase) you should know it
[19:51] <k1l_> Ocnios: on desktop the ssh server is not standard
[19:51] <Nooby_One> yes, i did it alreay, the site did not accept it
[19:51] <MadWasp> daftykins: since i have a lot of harddrives, i chose to manually make my partitions, i don't think i'm using lvm, can i still switch to it?
[19:51] <Nooby_One> the name of my network + it's password, and it did not work
[19:51] <ruth> Thank you! We figured it out!
[19:52] <daftykins> MadWasp: "sudo parted -l" will show whether there's any LVM going on. if you installed with it you'd have to reinstall.
[19:52] <Ocnios> k1l_ thanks. I was trying to follow this guide and I'm stuck on the last step, probably because desktop doesn't accept SSH https://www.digitalocean.com/community/tutorials/how-to-install-and-configure-vnc-on-ubuntu-14-04
[19:52] <MadWasp> daftykins: there wasn't even an option in the manual mode :(
[19:53] <daftykins> MadWasp: for what?
[19:53] <MadWasp> lvm
[19:53] <daftykins> oh to use it, *shrug*
[19:53] <marbangens> is it normal to just see some weird green stripes when booting? Or is it a known plymouth problem?
[19:53] <MadWasp> and it says my partition table is gpt now
[19:53] <daftykins> i don't understand it so i never use it.
[19:54] <ioria> Nooby_One, sudo usermod -aG lpadmin <username>
[19:54] <Caleb--> ever since i updated to 15.04, movie thumbnails started appearing with film strips
[19:55] <k1l_> Ocnios: install openssh-server
[19:55] <Ocnios> k1l_ any suggestions an an apt-get to... thanks!
[19:55] <Nooby_One> it did nothing?
[19:55] <ioria> Nooby_One, and restart cups and use your system username and passwd
[19:55] <Caleb--> i noticed that totem.thumbnailer was rewritten, so i copied ffmpegthumbnailer.thumbnailer over it, removed ~/.cache/thumbnails and restart nautilus. but i still get the same problem :S
[19:56] <Nooby_One> ok!!
[19:56] <raphus> @Ocinos after installation switch the default port to any other number than 22
[19:56] <ioria> Nooby_One, restart cups sudo service cups restart go to http://localhost:631/ in browser
[19:56] <Nooby_One> now i choose what? the network printer (which is mine) or the HPLIP option
[19:56] <Nooby_One> now i choose what? the network printer (which is mine) or the HPLIP option
[19:56] <boubacarpenter> bonjour, je suis nouvel utilisateur de ubuntu studio je voulais savoir s'il y avait qq un ici qui serai me parler un peu de ce systeme
[19:57] <ioria> Nooby_One, your printer i yhink
[19:57] <OerHeks> !fr | boubacarpenter
[19:57] <vlt> Caleb--: What problem?
[19:58] <raphus> @boubacarpenter try /join #ubuntu-fr
[19:58] <Ocnios> k1l_ YAY!!!!
[19:58] <boubacarpenter> thank's raphus
[19:59] <Nooby_One> ok, i printed a testpage using cups
[19:59] <ioria> Nooby_One, no, try to print a file you edited
[20:00] <Nooby_One> but it still does not show up in HPLIP
[20:00] <Nooby_One> printed a file, ok
[20:01] <ioria> Nooby_One, open gedit  or what you have write some and print it
[20:01] <Ocnios> k1l_ ugh -- no connection could be made because the target machine actively refused it (msg from TightVNC) but I can now SSH into it...
[20:02] <Nooby_One> i did it already, and it printed ok
[20:02] <Nooby_One> but still no show in HPLIP
[20:02] <ioria> Nooby_One, it  is working or not ?
[20:02] <raphus> Ocnios you have to 'service ssh start'
[20:02] <Nooby_One> the printer is working ok, but still not showing in HPLIP
[20:03] <ioria> Nooby_One, who cares :-P
[20:03] <ioria> sorry
[20:03] <Ocnios> raphus Job is already running: ssh
[20:03] <raphus> @Ocnios and you still cant connect?
[20:04] <raphus> @Ocnios wait were you the one running ubuntu-desktop on a VM on a server?
[20:04] <Ocnios> yes
[20:04] <Ocnios> I can use putty on WIN to SSH in, but tightvnc fails
[20:05] <huggo> hello
[20:05] <huggo> anyone who can tell me the way to linuxmint-help channel
[20:05] <raphus> @Ocnios did you run /etc/init.d/vncserver start
[20:05] <Nooby_One> @ioria... i do... because i still have the same problem with the printer
[20:05] <Ocnios> yes and i just did -kill :1 and it killed it then i restarted it and still can't connect
[20:06] <Ocnios> raphus
[20:06] <ioria> Nooby_One, what problem ?
[20:06] <Nooby_One> the status says that my printer is not connected to the internet
[20:06] <treelol_2> huggo: /connect irc.spotchat.org
[20:06] <raphus> which system do you use to establish the connection?
[20:06] <OerHeks> !mint
[20:06] <ioria> Nooby_One, http://hplipopensource.com/hplip-web/index.html
[20:06] <Nooby_One> and i think that's why i can not connect to HPLIP
[20:06] <Ocnios> raphus Windows Server 2012 R2 (LAN)
[20:06] <Rave1> huggo   it is on the spotchat server
[20:06] <Nooby_One> http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Photosmart-5520-No-internet-connection-post-update-download/td-p/2686239 look at this link
[20:06] <ioria> Nooby_One, it's another story
[20:06] <huggo> ty
[20:07] <huggo> Ravel
[20:07] <ioria> Nooby_One, http://hplipopensource.com/hplip-web/index.html
[20:07] <raphus> @Ocnios i meant the system you try to connect from
[20:07] <harminuriel> Hello, can someone help me? I'm going mad, is it possible to use mbrola voices with the Orca screen reader?
[20:08] <Ocnios> raphus I am connecting from Win 2012 R2 to Ubuntu 14 desktop using TightVNC (with an open active SSH putty session from Win 2012 R2 to Ubuntu 14)
[20:08] <Nooby_One> it says to go to the IP page of my printer, and chance the IP manually, however, it also asks to change the DSN.... and there's the problem, for some reason, i am unable to acces and modify my DSN
[20:08] <Foorack> Hey
[20:08] <raphus> @Ocnios okay .. which tool do you use? realvnc?
[20:08] <Ocnios> TightVNC
[20:09] <daftykins> Nooby_One: *DNS* you mean?
[20:09] <raphus> @Ocnios did you activate NAT?
[20:09] <ioria> Nooby_One, for hplip you can find it in Package Manager ...  for DNS you can  use Net Man
[20:09] <raphus> @Ocnios on the VM
[20:10] <Nooby_One> oops... yes... using various languages at the same time :s
[20:10] <ioria> Nooby_One, if you set them in your router and you can't acces it you have to reset your router
[20:10] <Nooby_One> do you have by accident an HP printer?
[20:10] <ioria> Nooby_One,  one , but not wireless
[20:11] <Ocnios> raphus yes. oddly, i can connect using the LAN IP and TightVNC
[20:11] <cats> w
[20:11] <Ocnios> vs localhost:5901
[20:11] <cats> er
[20:11] <cats> not sure how that happened
[20:11] <cats> I was switching tabs too fast
[20:11] <Nooby_One> ok, so anyway, that's the real problem i think, i can not install it correctly into my network, and i already tried a factory reset on the printer
[20:12] <raphus> @Ocnios okay than im out of knowledge. Cant help you from distance. whats with kil ...
[20:12] <ioria> Nooby_One,  one , no, on the router
[20:12] <Nooby_One> ???
[20:12] <Ocnios> raphus thanks, as long as I can get this far i should be able to muddle through. was just trying to find a way to access it without using vsphere
[20:12] <ioria> Nooby_One,  can you access your router ?
[20:13] <Ocnios> though now i need to remove xfce and replace with unity
[20:13] <ioria> Nooby_One,  it's the  gateway usually
[20:13] <Nooby_One> sorry for asking, being a noob and such... you mean the IP from my modem? like the same thing that i did for the printer, but now for the modem?
[20:13] <raphus> @Ocnios i think you are 90% done... i wouldn't use unity if you connect via vnc
[20:14] <ioria> Nooby_One, in the browser    bar type your gateway aip
[20:14] <Ocnios> raphus what GUI would you reccomend?
[20:14] <ioria> ip
[20:14] <Nooby_One> ok, i'm in ;)
[20:15] <raphus> @Ocnios something lightweight... KDE XFCE
[20:15] <raphus> @Ocnios everything but unity or gnome
[20:15] <ioria> Nooby_One, without username and passwd ?
[20:15] <Nooby_One> is that correct???!!!! the time it says 1970, jan, 3???!!! ... no, i needed password and username
[20:15] <Ocnios> raphus thanks, next step is to try and get http://www.fogproject.org/ going
[20:16] <Nooby_One> i'm in the router/gateway.... and the time indicates 1970????!!!!
[20:16] <helo> hmm... /me wonders why his mouse and all video has started skipping every second or so consistently
[20:16] <ioria> Nooby_One, no, maybe we are a bit further
[20:17] <ioria> Nooby_One, sorry for asking.... if your printer is working, what are you looking for ?
[20:17] <petrvs> Nooby_One: 1970 is when Unix time started
[20:17] <raphus> @Ocnios didn't work with that yet. Whats the problem there?
[20:18] <Ocnios> raphus nothing yet, haven't started. it's all new to me. Any way you kow of (like Unity remote) to remote to a unity desktop through a win os
[20:18] <petrvs> Ocnios: vnc
[20:19] <Nooby_One> i am looking to connect my printer into HPLIP and to connect my printer to the internet to use all services, as it did when i first installed it, and now does not work anymore even after factory reset
[20:19] <raphus> @Ocnios i tried rdesktop but i think thats only to connect linux to windows through rdp not sure
[20:19] <Ocnios> petrvs VNC+Unity is not reccomended by anyone i've spoken to
[20:19] <petrvs> Ocnios: just change the wm and it'll be fine
[20:20] <Ocnios> wm?
[20:20] <petrvs> window manager
[20:20] <ioria> Nooby_One, have you HPLIP installed ?
[20:20] <Nooby_One> yes
[20:20] <compdoc> I only wish Unity worked with vncserver
[20:20] <compdoc> then I wouldnt have to install Mate
[20:20] <Ocnios> petrvs in TightVNC? How would I change the WM?
[20:20] <ioria> Nooby_One, reinstall them
[20:20] <krav> anyone know if there's any kludge to get around https://bugs.launchpad.net/ubuntu/+source/nss-pam-ldapd/+bug/1029656
[20:21] <krav> it's driving me nuts. ldap needs to actually work.
[20:21] <petrvs> Ocnios: no on the Ubuntu side
[20:21] <daftykins> Nooby_One: i think this is a better task for HP Support.
[20:21] <krav> :(
[20:21] <petrvs> or you can tell Ubuntu's VNC to start a whole new session with any wm
[20:21] <Ocnios> compdoc what's MATE/
[20:21] <Nooby_One> i did not find an HP channel, and also, the problem arises using their steps, and can not find any other help
[20:21] <compdoc> a 2D desktop, that supports the same programs that install on Unity (gnome)
[20:22] <Nooby_One> all the links say to change the DNS, however, that's the problem, on the IP page of my printer i, for some reason, can NOT modify my DNS :s
[20:23] <Nooby_One> @ioria... can you tell me in terminal how to uninstall and reinstall please?
[20:23] <pavlos> Ocnios, MATE is a desktop environment, http://mate-desktop.org/
[20:23] <Ocnios> thanks!
[20:23] <daftykins> Nooby_One: no you don't find them on IRC - you *phone* them via standard support avenues
[20:23] <mac33> hi to everyone
[20:23] <Ocnios> i'll try mate instead of xfce4
[20:23] <ioria> Nooby_One   if you open Package manager and type HPLIP you can remove, purge and update
[20:23] <daftykins> Nooby_One: because this is a printer query, not an Ubuntu issue i'm afraid.
[20:24] <ioria> Nooby_One   sorry, have to go wish you solve it
[20:24] <raphus> @Ocnios why do you want a desktop environment at all?
[20:25] <krav> ok. anyone know a way to start a service not using rc.local or init.d when you start the computer?
[20:25] <Nooby_One> no need to apologize.... thank you very much for the patience!
[20:25] <Ocnios> raphus because i'm a n00b loser who sucks at life and bin/bash
[20:25] <raphus> @Ocnios xD dont be so hard on yourself
[20:25] <krav> Ocnios: takes time to stop being a n00b loser. we've all been there.
[20:25] <krav> give it 2 years and you'll be giving out the advice.
[20:26] <pavlos> krav, you could add your app to the startup applications, 14.04
[20:26] <Nooby_One> @daftykins... i understand it is a printerquery, i was just trying my luck for some help, there's no live support channel in the country where i am now
[20:27] <Ocnios> Easier to call myself a n00b than have others throw the label on me, but yes, the fact I was able to 90+% follow that VNC on ubuntu guide with no help shows how far i've come. I know wayyyy more than I did a few years back and at least now ubuntu works defacto with my wireless cards
[20:27] <Ocnios> it's the one thing that kept me from using it as OS.main all these years
[20:27] <eggbeater> Ocnios: yo, I think I'm even more of a n00b than you. You're not alone :D
[20:27] <daftykins> Nooby_One: i see, well sadly that doesn't make it one for here.
[20:27] <krav> pavlos: that's what i'm doing already :P that's init.d
[20:27] <petrvs> Ocnios: again, the only thing that should matter to unity+vnc is the window manager, compiz
[20:27] <petrvs> try with any other window manager
[20:28] <raphus> @Ocnios afaik this channel is mostly troll-free :)
[20:28] <krav> pavlos: it's also unfortunately a headless server, no gui
[20:28] <krav> Ocnios: you're doing fine :)
[20:28] <Ocnios> raphus good to know
[20:29] <Nooby_One> @daftykins... i am sorry... did i offend you? i was just asking for help, and someone was so nice to help me with it... even if it in the end turned out to be not an entirely ubuntu problem
[20:29] <krav> Nooby_One: what are you trying to do?
[20:29] <Ocnios> is there a terminal cmd to change resolution for unity desktop? i have a vsphere window open but it's at 800x600 and i can't see enough of the screen to use the display tool to resize
[20:30] <krav> Ocnios: you might be able to use randr to change the display size.
[20:30] <krav> I'm not really familiar with unity
[20:30] <pavlos> krav, if I understand, server is non-gui, you could add the service into one of the rc.d/ levels right?
[20:30] <Nooby_One> @krav... it seems i have a network problem with my HP printer
[20:30] <krav> pavlos: have done that.
[20:30] <daftykins> Nooby_One: no, it's just not the channel rules :>
[20:30] <krav> pavlos: this is why it's frustraiting. :)
[20:30] <krav> pavlos: it's got a bug.
[20:30] <Nooby_One> my ubuntu is connected with it, but it seems my printer is not connected to the internet, and i think that's the cause that it is not connecting to HPLIP
[20:30] <krav> but the bug doesn't have a fix, it's been open to 2 years.
[20:30] <krav> Nooby_One: :(
[20:31] <krav> no fun
[20:31] <krav> Nooby_One: does your pirinter need to be internet capable?
[20:31] <Nooby_One> yes
[20:32] <Nooby_One> sending scans to my email, printing from my cellphone, etc and also, i think, either because of faulty HPLIP or the faulty network, i can not scan into ubuntu
[20:33] <fernando__> hola
[20:33] <Nooby_One> @krav... if you have a suggestion... shoot ;) .... i'll be back in 5
[20:34] <fernando_> Olá, alguém brasil?
[20:35] <pavlos> !br| fernando_
[20:35] <fernando_> obrigado
[20:35] <pavlos> fernando_, you'rewelcome
[20:35] <MadWasp> what is wrong with the captcha at ubuntu one, that is hilariously hard
[20:36] <Sidoniuns> Fernando, e ai? Sou do brasil
[20:39] <MadWasp> can anybody help me with the captcha at ubuntu one? i just can't read it... and i'm human btw
[20:39] <Ocnios> robot^
[20:39] <MadWasp> it is hilariously hard
[20:39] <Ocnios> Just kidding, but it would change for anyone who see's it, and yes it is.
[20:40] <MadWasp> how to solve it then?
[20:40] <eggbeater> try reloading the code
[20:40] <raphus> @MadWasp if you give me your e-mail-adress and your password i can register you xD
[20:40] <MadWasp> i have been reloading it for around 150 times now
[20:41] <Nooby_One> back
[20:41] <eggbeater> MadWasp: Heck, try the audio Captcha
[20:42] <MadWasp> there is no such thing
[20:42] <pavlos> MadWasp, can you zoom your desktop?
[20:42] <fernando28> ubuntu mate 14.04 to ubuntu mate 15.014 upgrade how to ??????????
[20:43] <MadWasp> lol, no captcha needed on their website
[20:43] <loa> are not ubuntu one dead?
[20:43] <pavlos> ubuntu one stopped july 2014
[20:43] <loa> or file storage called other way?
[20:43] <loa> time machine here.
[20:44] <TJ-> MadWasp: What URL are you seeing this CAPTCHA on? I don't see one for the login or create acount options at one.ubuntu.com
[20:44] <MadWasp> the software center asked me to login to ubuntu one
[20:44] <raphus> ubuntu one is not the same as the ubuntu account. the file storage is dead but the account is needed in order to buy software
[20:44] <MadWasp> TJ- i did it now, i registered on their website, i tried registering in the app
[20:45] <MadWasp> i need that captcha code :D
[20:45] <MadWasp> just to troll people
[20:45] <MadWasp> :D
[20:45] <kostkon> raphus, ubuntu one is the ubuntu sso now
[20:45] <MadWasp> is that captcha code open source somewhere?
[20:55] <Guest57115> i can not run startx  and when i run sudo  this error happen : unable to open /var/lib/sudo/mohammad/tty1 : no such file or directory
[20:55] <k1l_> Guest57115: dont use startx. start the lightdm that will start the xserver for you
[20:56] <k1l_> Guest57115: and obviously dont run everything with sudo/root, like irc, too
 but it is mint linux and i don know chanell of mint linux please tell me what is the name of chanell and server of mintlinux
[20:58] <k1l_> !mint | Guest57115
[20:58] <k1l_> its even on another irc network
[21:00] <Fishscene> Greetings. I'm trying to figure out why Ubuntu Server keeps throwing an error saying port 5222 is already in use. But I can't seem to find What is listening on that port. The *only* command that returns a possible result is: "grep -w 5222 /etc/services". Which yields xmpp-client and jabber-client. Attempting to remove either of these throws "unable to locate xmpp-client/server"
[21:00] <Fishscene> Any ideas on what might be using port 5222 or how to remove those services?
[21:01] <OerHeks> Well, Jabber a popular instant message protocol is based on XMPP, so stop the Jabber service ?
[21:01] <OerHeks> then remove
[21:01] <Guest57115> my properties system are : cpu : Intel pentium (R) Dual and RAM : 1.5 G   is good ubuntu 15.04 for it ?
[21:02] <lilis> Heya guys, I dd-ed Ubuntu 15.04 image and tried to boot it on my desktop but it always fails to boot. Anybody has the same issue?
[21:02] <raphus> @Guest57115 should work with that
[21:02] <lilis> Different error came out after I re-dd it too
[21:02] <stacks88> Fishscene try fuser -v 5222/tcp
[21:03] <stacks88> or lsof -ni|grep 5222 or netstat -tunap|grep 5222
[21:03] <Pici> Fishscene: What process is actually using that? sudo netstat -tanp | grep 5222 (or sudo ss -np | grep 5222)
[21:03] <Fishscene> I can't see the process with "sudo netstat -tanp | grep 5222", but it shows something is listening on the port
[21:04] <stacks88> try fuser and lsof
[21:05] <Fishscene> fuser -v 5222/tcp returned nothing at all.
[21:05] <Fishscene> lsof -ni } grep 5222 yielded nothing
[21:06] <Fishscene> err… } = |
[21:06] <Pici> Fishscene: What is throwing the error that says that 5222 is in use?
[21:07] <k1l_> lilis: did you check the md5sum? what error is it?
[21:07] <Fishscene> Pici: Regenerating error… just  a minute..
[21:08] <Pici> Fishscene: actually, I'm stepping away from the keyboard, someone else might be able to assist, but that info should be helpful
[21:08] <Ocnios> what's the apt-get for MATE
[21:08] <Ocnios> nevermind
[21:11] <Fishscene> Error log: http://pastebin.com/3rVmLmqX
[21:14] <tonyt> while installing wine through ubuntu software center, ubuntu software center window dims after installing wine about 70%. now that its dimmed it just sits there and does nothing. anyone have any ideads?
[21:14] <tonyt> *ideas
[21:14] <raphus> is it grey?
[21:14] <tonyt> ya
[21:15] <tonyt> it got darker
[21:15] <raphus> thats like in windows when a window is just white
[21:15] <raphus> it means its stuck
[21:15] <raphus> just quit it and try again
[21:15] <tonyt> k
[21:15] <eggbeater> tonyt: try getting wine through apt-get
[21:15] <tonyt> k eggbeater
[21:15] <lilis_> k1l_: I checked the md5sum and it's alright
[21:15] <lilis_> But now that I think about it, I am using 2G usb drive
[21:15] <k1l_> lilis_: what is the error then?
[21:16] <lilis_> It came out different everytime I flash it, sometimes a kernel panic, sometimes boot: out of memory, and one other error
[21:17] <lilis_> I pressed enter several times before it got to "boot: out of memory" though
[21:18] <lilis_> Otherwise, it was just stuck at some weird assembly-debugger-like UI
[21:18] <k1l_> is the ram ok?
[21:19] <lilis_> I haven't tested the RAM intensively but it should be fine
[21:19] <lilis_> I can boot Arch and Fedora
[21:19] <lilis_> But perhaps 2G is not enough? Could that be a reason?
[21:20] <lilis_> Maybe it's corrupted?
[21:20] <k1l_> no. 2gb is enough. dd copies bit for bit so its exact the size of the .iso
[21:20] <k1l_> thats what i meant with check the md5sum
[21:20] <k1l_> and make sure to dd to ssdb and not sdb1 or such
[21:20] <k1l_> *sdb
[21:20] <Ocnios> k1l_ what would the last line be for #!/bin/bash xrdb $HOME/.Xresources startxfce4 & ||||| for MATE ubuntu-mate-desktop
[21:20] <k1l_> when sdb is your usb drive
[21:21] <Ocnios> startubuntumatedesktop & ?
[21:21] <krav> Nooby_One: it seems really unlikely that most of that would require your computer.
[21:21] <k1l_> Ocnios: you dont do any of that. just choose mate at the login screen
[21:21] <lilis_> I tried to use Startup Disk Creator as well and it complained about not enough free space even though it says it has 1.9G of free spad
[21:21] <Ocnios> k1l_ for VNC i thought i had to do this before i connect....
[21:22] <k1l_> Ocnios: hmm, i am not familiar with vnc and such
[21:22] <Ocnios> k1l_ when i connect via VNC there is no option to pick mate, it just loads the desktop
[21:22] <Ocnios> or GUI rather
[21:22] <raphus> u can if you typ 'nano /etc/init.d/vncserver
[21:22] <raphus> *type
[21:23] <raphus> you have to google the command for mate but it must be possible
[21:23] <Ocnios> raphus i'd rather preset it if possible
[21:23] <Ocnios> ok thanks
[21:23] <raphus> that is presetting...
[21:23] <Ocnios> well this is nano ~/.vnc/xstartup
[21:23] <raphus> if you modify that file it will be permanent
[21:24] <Ocnios> i just dont know if it's startmate / startubuntumatedesktop / startubuntu-mate-desktop
[21:24] <mw44118> hi -- anybody in here can help me set up a static IP address on one interface, and a dhcp on another?
[21:24] <Ocnios> vnic?
[21:24] <Ocnios> in ubuntu? or two phys interfaces
[21:25] <mw44118> Ocnios: in ubuntu -- i have eth0 and wlan0
[21:25] <raphus> "$VNCDESKTOP Desktop" &
[21:25] <raphus> mate-session &
[21:25] <raphus> try that
[21:25] <mw44118> wlan0 is a dhclient.  i want eth0 to have a static IP
[21:25] <Ocnios> so click connections at the top bar > edit connections > click the interface > click edit
[21:25] <Ocnios> raphus thanks
[21:26] <mw44118> Ocnios: sorry, this is server; need to use CLI
[21:27] <Ocnios> http://www.howtogeek.com/howto/ubuntu/change-ubuntu-server-from-dhcp-to-a-static-ip-address/
[21:27] <mw44118> Ocnios: thanks
[21:29] <rking> Anyone else here used IBM Notes on Ubuntu. I am noticing compiz seems to cause notes to freeze for a little bit ( mouse locked out from interacting with the program ) never had an issue before.
[21:29] <petrvs> what's an ibm notes?
[21:29] <lilis> k1l_: I tried different usb drive and now it works :/
[21:30] <petrvs> lilis: laptop?
[21:30] <lilis> desktop
[21:31] <lilis> Maybe that usb is faulty or something
[21:31] <lilis> Lol
[21:31] <petrvs> happens
[21:31] <petrvs> front usb ports tend to be not as great, too
[21:31] <petrvs> as they're usually little mini daughter boards or the like
[21:32] <k1l_> well, usb pen drives die. they are just very cheap chips.
[21:32] <kubunto> is here a way to undo mv src ~/*?
[21:32] <petrvs> kubunto: 'mv src ~/*' ?
[21:32] <lilis> Thanks guys
[21:32] <kubunto> petrvs: a command in that format just fucked over a lot of my data
[21:33] <petrvs> kubunto: in what way?
[21:33] <kubunto> removed all files in my home directory not within a hidden dir
[21:33] <gryzor> kubunto: no undo
[21:33] <petrvs> interesting
[21:33] <gryzor> time to restore backup
[21:34] <petrvs> kubunto: and what was src?
[21:34] <Ocnios> raphus no that's not the right cli entry :(
[21:36] <raphus> @Ocnios hmm fuck that worked for Mint Rebecca (17.1) thats basically Ubuntu 14.04
[21:36] <Ocnios> I'm going to try again i hate sessionS not session
[21:36] <Ocnios> had^
[21:37] <raphus> :P
[21:37] <TiK> Hi
[21:37] <petrvs> hi
[21:38] <Ocnios> nope, VNC is all garbled and shit
[21:38] <Ocnios> stuff (sorry)
[21:38] <lilis_> Yay logged in from my new Ubuntu!
[21:38] <petrvs> lilis_: gj
[21:39] <Ocnios> lilis_ congrats!!
[21:39] <lilis_> Haha thanks again guys
[21:42] <hoang> hello
[21:42] <lilis> Heya
[21:42] <raphus> hi
[21:43] <petrvs> ohai
[21:43] <TiK> sup?
[21:43] <hoang> first time on IRC, don't know how to use this app
[21:43] <raphus> its pretty simple
[21:43] <raphus> type /help for commands
[21:43] <raphus> type /list for a list of channels
[21:44] <petrvs> though on this network, /msg alis list *term* is more useful than /list
[21:44] <petrvs> TiK: pimpin' hoes, earnin' that cash
[21:44] <SchrodingersScat> !alis | raphus, there's also the handy alis bot
[21:45]  * petrvs sighs
[21:45] <raphus> nice
[21:45] <BlackDalek> Is there any way to stop the top panel from displaying on an external display?
[21:45] <JimboSlice> What is the process plymouth-upstart-bridge doing?, what is its purpose
[21:45] <raphus> you can choose it at the display-app
[21:45] <raphus> @BlackDalek
[21:46] <BlackDalek> I want to have the top panel (indicators, clock, battery, volume etc.) to ONLY show on the main display. How do I get it off the secondary display?
[21:46] <lilis> Plymouth is the boot screen I think, and upstart is the process that starts it?
[21:47] <raphus> @BlackDalek use the Display-App :P or unity-tweak-tool
[21:48] <YeahToast> raphus odd
[21:48] <YeahToast> raphus I got it working, you were right it's mate-session
[21:48] <YeahToast> i had to reboot for it to take hold for some reason
[21:48] <YeahToast> thank you, perfect way to end my work day today, later!
[21:48] <raphus> @YeahToast nice contraz :)
[21:49] <canonicaldroid> Does anyone else have problems with spotify on ubuntu 15.04
[21:50] <JimboSlice> @lilis okay thanks, that make sense, I configured a bash script to run from booth via /etc/rc.local.. and then this plymouth thin turned up in my processes
[21:51] <xangua> http://www.webupd8.org/2015/04/fix-missing-libgcrypt11-causing-spotify.html canonicaldroid
[21:53] <raphus> bye bye everyone :) i had a pretty hard week
[21:53] <raphus> zzzzzZZZZZZZZzzzzzZZZZZ
[21:53] <JimboSlice> I want to have a bash script to run at certain intervalls. is cron job be a good way to implement this? or is it a bad idea?
[21:55] <SchrodingersScat> JimboSlice: afaik cron can do that
[21:56] <circ-user-GRgvO> hi all, quick question. Can someone point me to page download an iso of ubuntu version that used linux kernel 3.4.48?
[21:57] <JimboSlice> yes, from what I understand, that would be a good way to do it.
[21:57] <JimboSlice> @SchrodingersScat thanks
[21:57] <tlt> circ-user-GRgvO, that must be an old one. 12.04 uses 3.13 afaik
[21:57] <tlt> so maybe ubuntu 11 or 10
[21:57] <circ-user-GRgvO> ok thanks
[21:57] <k1l_> circ-user-GRgvO: 12.04 uses 3.2
[21:58] <k1l_> circ-user-GRgvO: what is the reason for that?
[21:58] <tlt> nah 12.04 seems to have used that kernel you're looking for at an early stage, circ-user-GRgvO
[21:58] <BlackDalek> Can't find anything called display-app in the repository... and unity-tweak-tool does not appear to have any option for removing indicator panel from external screen. Does this mean there is no possible way to remover the panel from top of secondary displays?
[21:58] <circ-user-GRgvO> i need to compile some source code to run on another host processor that is running android with a linux kernel 3.4.48
[21:59] <ledil> hello, I need some help with iptables, ive got a server and behind the server is a ftp server .. passive ftp is working, but on active ftp the "ls hangs", any idea ?
[21:59] <k1l_> circ-user-GRgvO: you dont need a kernel 3.4 running for that
[21:59] <circ-user-GRgvO> from my limited knowledge, I though i needed to compile source against the same kernel I will be using the module on
[22:00] <circ-user-GRgvO> id be compiling a kernel module
[22:02] <lilis> You can try getting the Linux 3.4.48 version from kernel.org and compile your module with it
[22:03] <circ-user-GRgvO> @lilis do I need my OS to be running that kernel?
[22:03] <k1l_> what about getting the kernel headers from that other system and compile it with that?
[22:03] <lilis> You don't need to
[22:03] <Bashing-om> circ-user-GRgvO: Not at all sure will help, but if ya want to see all the mainline kernels from the start of ubuntu : http://kernel.ubuntu.com/~kernel-ppa/mainline/ .
[22:03] <lilis> AFAIK
[22:03] <Pinkamena_D> I have been trying to install a specific version of R but i can not seem to. I specify a version with apt-get install r-base-core=3.1.2-1trusty0 but upon starting R I still see R 3.2.0
[22:03] <circ-user-GRgvO> thanks, I was just looking at that link
[22:04] <lilis> If you can't find it there, I guess you'll have to look at github.com/torvalds/linux and download the v3.4.48 tag release
[22:05] <lilis> Err never mind, the Github version doesn't have until v3.4
[22:05] <circ-user-GRgvO> and then when I compile my source I can point the compiler to those kernel headers?
[22:05] <k3asd`> hi there,  I was installing the ati proprietary driver and right now the DE doesn't start
[22:05] <k3asd`> I'm using lubuntu 14.04 x64
[22:05] <k3asd`> I want to come back. how can I do?
[22:06] <BlackDalek> is there any way to remove the top panel (indicators, clock etc.) from a secondary display or is it a permanent immovable feature of unity?
[22:06] <lilis> It should automatically point to the kernel headers of the downloaded kernel
[22:06] <lilis> If you use their Makefile system
[22:06] <circ-user-GRgvO> ahh
[22:06] <k3asd`> cd /etc/X11
[22:06] <k3asd`> ls
[22:06] <k3asd`> ops
[22:06] <k1l_> BlackDalek: i am not aware of beeing able to remove it
[22:07] <Bashing-om> k3asd`: What card ? ' lspci -vnn | grep VGA -A 12 ' to show the graphics chip set(s) .
[22:08] <gr33n7007h>  /j ##alfa
[22:08] <Kage`> Ok, can someone give me a good direction on disk encryption with Ubuntu, please?  Every article (FullDiskEncryption, EncryptedFilesystems, etc.) are contradictory and pointing in circles of each other, claiming each other are bad ideas.  So.. what is the recommended standard?  luks, cryptsetup, +dm_crypt, ..?  Because they all say, "Yes."
[22:09] <k3asd`> Bashing-om: thanks. the video card is AMD/ATI REdwood HDMI Audio [Radeon HD 5000 Series]
[22:10] <k3asd`> Bashing-om: I also see: VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530/6550M]
[22:11] <k3asd`> Bashing-om: Subsytem: Sony Corporation Mobility Radeon HD 5650
[22:12] <k3asd`> Bashing-om: kernel driver in use: radeon
[22:12] <Bashing-om> k3asd`: Well, that card should be supported. How did you try and install a proprietary driver ? OEM or "additioanl Drivers " ? How it is removed depends .
[22:13] <Mete-> newbie question, I did a dpkg --get-selections | grep -v deinstall > ~/packages to check the packages I have installed on this computer, is 3473 too much?
[22:13] <Mete-> this computer is getting slow...
[22:13] <k3asd`> Bashing-om: I was following this link: help.ubuntu.com/community/BinaryDriverHowto/AMD
[22:14] <EriC^^> Mete-: use this comm -23 <(apt-mark showmanual | sort -u) <(gzip -dc /var/log/installer/initial-status.gz | sed -n 's/^Package: //p' | sort -u)
[22:14] <k3asd`> Bashing-om: point 2 - Installation via the Ubuntu repositories
[22:14] <k3asd`> Bashing-om: I installed via apt-get fglrx
[22:14] <k1l_> Mete-: there is no "too much packages" if you still have free space :)
[22:15] <netameta> anyone know why would virtualbox give me this error: vBoxCLient: the virtualBox Kernel serive is not running exiting
[22:15] <Mete-> Yeah, the problem is probably some services
[22:15] <Mete-> thanks EriC^^ !
[22:15] <k3asd`> Bashing-om: I've done via command line
[22:16] <k1l_> Mete-: installed packages dont slow your system down, as long as they are not services that are running. check it with top/htop what systemload you got and what is using the ressources
[22:16] <netameta> anyone know why would virtualbox give me this error: "vBoxCLient: the virtualBox Kernel serive is not running exiting"
[22:17] <Mete-> yeah, mysql, chromium, etc... just the normal
[22:17] <k1l_> netameta: how did you install virtualbox? was there an error?
[22:18] <reisio> netameta: lsmod | grep -i vboxdrv
[22:18] <k1l_> make sure the kernel headers are installed
[22:20] <Bashing-om> k3asd`: OK, WQe can revert that FGLRX install .. however, have you ever attempted an install of the driver from the AMD web site ?
[22:21] <k3asd`> Bashing-om: the manual installation? not yet? if you want, I can do it
[22:21] <Bashing-om> WQe/We*
[22:22] <Bashing-om> k3asd`: No, I like your idea to revert back to open source .. and then see what you want to do .
[22:22] <k3asd`> Bashing-om: How can I revert back to open source?
[22:24] <canonicaldroid> xangua: you here?
 netameta: how did you install virtualbox? was there an error?
 netameta: lsmod | grep -i vboxdrv
[22:25] <k3asd`> Bashing-om: I've done: apt-get remove --purge fglrx* && apt-get autoremove
[22:26] <netameta_> k1l_, no there wasnt
[22:26] <k3asd`> Bashing-om: I rebooted the laptop but I did not solve
[22:26] <netameta_> reisio, not show what to do with this command
[22:26] <netameta_> as it does nothing it seems
[22:27] <k1l_> netameta_: so the vbox module is missing. what gives you "uname -a"?
[22:27] <netameta_> Linux netameta-VirtualBox 3.16.0-34-generic #47~14.04.1-Ubuntu SMP Fri Apr 10 17:49:16 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
[22:28] <ste____> hi there. I need to run the command start_unicode on each bootup, where is the best place to put this? I would prefer to configure it once - i.e for any user and any users I add in the future
[22:28] <netameta_> k1l_, is what i get from that command
[22:28] <k1l_> netameta_: is this a ubuntu inside a vbox?
[22:28] <Bashing-om> k3asd`: sudo mv /etc/X11/xorg.conf ; sudo apt-get purge fglrx fglrx-amdcccle fglrx-updates fglrx-amdcccle-updates ; sudo apt-get install dkms ; sudo apt-get install xserver-xorg-video-radeon ; sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core ; sudo dpkg-reconfigure xserver-xorg ; sudo update-initramfs -u .... Covers all the bases, when you reboot will now be up on the open source drive "radeon" .
[22:28] <netameta_> k1l_, that is correct
[22:28] <petrvs> ste____: what's it do?
[22:29] <ste____> if run in a terminal it turns unicode mode on which allows the characters to display properly in the terminal, otherwise I get loads of gibberish even though the locales are already set up properly with UTF8 etcetc
[22:29] <petrvs> ste____: what's it run?
[22:30] <netameta_> k1l_, it looks like some thing works fine but many others are simply screwed up
[22:30] <netameta_> like scrolling is not functional
[22:30] <reisio> netameta: lsmod | grep -i vboxdrv && echo "it's some other problem" || echo "you must run 'modprobe vboxdrv'"
[22:30] <ste____> I .. don't know? It appears to be a built in command that most linux distros run on bootup, but for some reason the ubuntu based build on my raspberry pi doesn't do it
[22:31] <k1l_> netameta_: what host OS is that? what version of virtualbox is it?
[22:31] <ste____> So I just need a place to put it so that I don't have to type it every time
[22:31] <EriC^^> ste____: do you have to run it every time you launch a terminal?
[22:31] <EriC^^> or just once
[22:32] <ste____> I'm not sure, sorry
[22:32] <EriC^^> ste____: if you run it, and then open another terminal, do you have to type it again there?
[22:32] <netameta_> Host os, windows 8.1, latest virtualbox so :
[22:32] <k1l_> netameta_: and please show a "dpkg -l | grep linux-header" in a pastebin please
[22:32] <netameta_> k1l_, 4.3.26
[22:33] <ste____> When the gui has launched it's not a problem. It's only when directly plugged into the pi and booting to a command line that the problem occurs. putty etc. is fine
[22:34] <k3asd`> Bashing-om: I'm rebootin, I hope everything works fine. see you soon :) for the moment, thanks a lot
[22:34] <netameta_> k1l_, http://pastebin.com/DWnvDZEB
[22:35] <EriC^^> ste____: i guess you could add it to /etc/profile
[22:35] <lilis> Perhaps you can put the script in .bashrc?
[22:35] <lilis> $HOME/.bashrc
[22:35] <Bashing-om> k3asd`: :) . no luck wished .. hard work gives better dividends .. see ya soonest .
[22:35] <EriC^^> ste____: that would be global for all users, and run once you login
[22:35] <sugoiryu> ste____, have you tried to put the command in /etc/rc.local to have it run on boot?
[22:35] <k1l_> netameta_: hmm, kernel headers are installed
[22:35] <EriC^^> *once when you login
[22:36] <ste____> I will try both, thanks. I just needed to know where it went
[22:36] <netameta_> k1l_, so this warrning is wrong ?
[22:36] <EriC^^> ste____: use profile, .bashrc will run every time you call bash
[22:37] <EriC^^> and don't use rc.local, it will be run by root and it's quite unnecessary
[22:37] <ste____> ok thanks eric
[22:39] <k1l_> netameta_: can you pastebin the whole error you got?
[22:40] <netameta_> Its a red notification the pops on the left of the screen when i restart
[22:40] <k1l_> dpkg -l | grep dkms
[22:41] <netameta_> nothing
[22:41] <k1l_> sudo apt-get install dkms
[22:41] <netameta_> Done
[22:41] <canonicaldroid> k1l_: I cant get spotify to work on 15.04
[22:42] <canonicaldroid> k1l_: I have tried everything
[22:42] <k1l_> if there is no dkms you wont get automated modules
[22:42] <k1l_> netameta_: did it produce the modules now?
[22:42] <k3asd`> Bashing-om: I did not solve :|
[22:42] <netameta_> how do i check that ?
[22:43] <k3asd`> Bashing-om: the monitor remains black
[22:43] <k1l_> lsmod | grep -i vboxdrv
[22:43] <netameta_> k1l_, i mean, i've installed the package you wrote
[22:43] <netameta_> k1l_, nothing
[22:44] <k1l_>  sudo /etc/init.d/vboxdrv setup
[22:44] <Bashing-om> k3asd`: There must be other problems .. Let's see what is graphics wise : ' sudo lshw -C display | pastebinit ' .
[22:44] <netameta_> k1l_, sudo: /etc/init.d/vboxdrv: command not found
[22:45] <k1l_> netameta_: what ubuntu version did you install there?
[22:45] <netameta_> 14.04
[22:45] <k1l_> and what install version?
[22:45] <netameta_> what do you mean ?
[22:46] <k1l_> regular desktop install? or server install? or netinstall?
[22:46] <k3asd`> Bashing-om: the command doesn't work
[22:46] <netameta_> Ah not sure, i went http://www.ubuntu.com/download/desktop, picked 64 and downloaded
[22:46] <k1l_> ah ok, so full desktop
[22:47] <k3asd`> Bashing-om: look there: http://paste.ubuntu.com/10881956/
[22:48] <netameta_> k1l_, why is that bad ?
[22:48] <Bashing-om> k3asd`: look at your http://paste.ubuntu.com/10881956/ .
[22:48] <k1l_> netameta_: no, that is not bad.
[22:48] <kostkon> canonicaldroid, we know. there's a fix, hopefully temporary
[22:49] <k1l_> netameta_: sudo apt-get install virtualbox-dkms
[22:49] <kostkon> canonicaldroid, http://www.webupd8.org/2015/04/fix-missing-libgcrypt11-causing-spotify.html
[22:49] <k3asd`> Bashing-om: ok, no problem. thank you
[22:50] <k1l_> netameta_: did you install the "guest additions" already?
[22:50] <netameta_> finished the above
[22:50] <netameta_> yes
[22:50] <netameta_> i think so
[22:50] <netameta_> the ones that make the screen sctrech
[22:50] <k1l_> thinking? or knowing?
[22:51] <netameta_> is it the one that makes the screen strech ?
[22:51] <netameta_> Ah yes
[22:51] <netameta_> i install it
[22:51] <netameta_> injected it though devices
[22:51] <Bashing-om> k3asd`: That output looks good .. A quick check .. have you tried to boot with the "nomodeset" boot option ? Then we go looking into the logs for clues as to what is not happening .
[22:51] <k1l_> sudo apt-get install virtualbox-guest-x11
[22:51] <k1l_> that one should pull everything you need for the guest os
[22:52] <netameta_> The following packages have unmet dependencies:
[22:52] <netameta_>  virtualbox-guest-x11 : Depends: xorg-video-abi-15
[22:52] <netameta_>                         Depends: xserver-xorg-core (>= 2:1.14.99.902)
[22:52] <netameta_> E: Unable to correct problems, you have held broken packages.
[22:52] <netameta_> sorry for the 3 lines
[22:52] <k1l_> sudo apt-get install virtualbox-guest-utils
[22:53] <k3asd`> Bashing-om: I've not tried to boot with the "nomodeset" option
[22:53] <k3asd`> Bashing-om: maybe, is it better verify the logs?
[22:53] <netameta_> k1l_,after utilities i should do the above again ?
[22:54] <k1l_> try a reboot
[22:54] <Bashing-om> k3asd`: Quicker for isolation to try "nomodeset" and see what results.
[22:54] <netameta_> before running virtualbox-guest-x11 ?
[22:54] <k1l_> yes
[22:54] <Bashing-om> !nomodeset | k3asd`
[22:55] <canonicaldroid> koston: I've done that. didnt work
[22:55] <canonicaldroid> koston: when I open spotify i get "Unable to initialize the storage of temporary files"
[22:55] <netameta> k1l_, some graphic capabilites error now
[22:56] <k3asd`> Bashing-om: I'm trying
[22:56] <k3asd`> ubottu: thanks
[22:56] <netameta_> was a bit too fast to catch
[22:56] <Bashing-om> k3asd`: K .
[22:57] <outlaw-666> hey everyone
, i can try rebooting again to get the error
[22:57] <outlaw-666> im trying to play TeamFortress2 on Ubuntu
[22:57] <outlaw-666> i get the OpenGl driver error
[22:57] <outlaw-666> i have this :
[22:57] <gh0strider> hey guys i am about to install ubuntu linux and i am trying to install it along two different os's windows 7 and another linux
[22:57] <outlaw-666> glxinfo|grep "OpenGL version"
[22:57] <gh0strider> i want ubuntu to overwrite the current linux i have
[22:58] <outlaw-666> OpenGL version string: 1.4 Mesa 10.1.3
[22:58] <gh0strider> so when i get to the installation and it says "install ubuntu along side these operating systems"
[22:58] <gh0strider> i choose other
[22:58] <gh0strider> and i select the partition that has the linux os that i want to overwrite with ubuntu right?
[22:59] <gh0strider> will that work?
[22:59] <k1l_> netameta: does it work?
[23:00] <netameta_> k1l_, well there was this warning
[23:00] <outlaw-666> is there a way to update OPENGL drivers ??
[23:00] <k1l_> netameta_: warnings are sometimes only warnings. does it work?
[23:01] <netameta_> k1l_, I dont know what to check to be sure it works
[23:01] <Ryu`> ,
[23:01] <outlaw-666> '
[23:01] <netameta> k1l_, the scrolling issue is gone its seems
[23:01] <Ryu`> hi
[23:02] <Ryu`> tü
[23:02] <Ryu`> :D
[23:02] <outlaw-666> darksoulpt, tuga ?
[23:02] <netameta_> k1l_, window resizing issue is gone
[23:02] <darksoulpt> yeah
[23:02] <Ryu`> no broth noooo
[23:03] <kostkon> canonicaldroid, https://community.spotify.com/t5/Help-Desktop-Linux-Mac-and/spotify-unable-to-initialize-the-storage-of-temporary-files/m-p/524312#M59277
[23:03] <netameta_> k1l_, i think it works fine now
[23:03] <outlaw-666> darksoulpt, sent you PM
[23:04] <darksoulpt> outlaw-666, I'm newbie too and please don't open a private chat window without asking, thx
[23:04] <outlaw-666> ok, sorry
[23:04] <Ryu`> no broth noooo
[23:04] <darksoulpt> np
[23:04] <darksoulpt> if I could help I would
[23:05] <outlaw-666> Can anyone here help me please ?
[23:05] <Ryu`> noo brot nooo
[23:05] <Ryu`> :D
[23:07] <netameta_> k1l_, Yaps seems to work better no error when resizing, scrolling is not problematic. Thanks very very much for help
[23:07] <k3asd`> Bashing-om: none with the nomodeset option
[23:08] <k3asd`> Bashing-om: I installed vesa driver and now the DE system works
[23:08] <k3asd`> Bashing-om: I think that before I'd another video driver because the resolution is busted now
[23:10] <Bashing-om> k3asd`: That vesa driver is there by default as the fall back driver . That is the driver that the "nomodeset" option would use. So not too sure at all what is going on.
[23:10] <k3asd`> Bashing-om: me too
[23:11] <k3asd`> Bashing-om: if you want I can make you see the Xorg.0.log file
[23:13] <Bashing-om> k3asd`: Yeah, we can look at that log file for sure . compare your 'lsmod | grep radeon' to mine : http://paste.ubuntu.com/10882076/ .
[23:14] <k3asd`> Bashing-om: http://paste.ubuntu.com/10882082/
[23:15] <Bashing-om> k3asd`: Look'n at your http://paste.ubuntu.com/10882082/ .
[23:15] <k3asd`> Bashing-om: lsmod | grep radeon returns nothing
[23:18] <warus> #calculate
[23:19] <warus> дайте на  русский канал ссылку
[23:19] <daftykins> warus: no thanks
[23:19] <newbie_irc> whatsup
[23:20] <Bashing-om> k3asd`: This too from the log file " [    14.603] (WW) Warning, couldn't open module ati " // is this on a fresh reboot attempting to boot with the open source driver? or is "vesa" forced ?
[23:20] <k3asd`> Bashing-om: yes
[23:21] <Bashing-om> k3asd`: Yes ?? which is the situation ?
[23:21] <k3asd`> Bashing-om: sorry, it's vesa forced
[23:22] <k3asd`> Bashing-om: without vesa the DE doesn't charge correctly
[23:25] <desiboston> Is there a way to sync box.net to linux folder..ned it badly
[23:26] <stuartuk> hey guys, i was wondering if its possible still to get the old system tray back up on 15.04? I need it back for programs like hexchat. thanks
[23:27] <stuartuk> any help would be appreciated
[23:28] <Bashing-om> k3asd`: Yeah, with the vesa driver .. will not have good resolution .. we need to get yopu up on the "radeon" - open source - driver . So, boot up as normal and post back the URL for the new Xorg.0.log file . See if we can see why the GUI is having problems.
[23:28] <Bashing-om> yopu/you*
[23:28] <k3asd`> Bashing-om: I need to remove vesa driver?
[23:29] <elementary> is elementary any good?
[23:29] <elementary> it looks clean
[23:30] <elementary> but does it run clean?
[23:31] <elementary> There are a lot of persons
[23:31] <Bashing-om> k3asd`: You advised that you installed it .. I have no idea of how and what you did .. but we do need to attempt to boot in a normal mode to get a clean file .
[23:31] <daftykins> elementary: Elementary OS is not on topic here.
[23:31] <k3asd`> Bashing-om: ok
[23:32] <a7i3n> Installed ubuntu 15.04 all went well but the keybindings in i3-wm for sound no longer work... any idea?
[23:32] <k3asd`> Bashing-om: in Italy is a bit late. Tomorrow I will continue to investigate
[23:32] <k3asd`> Bashing-om: I find you?
[23:32] <stuartuk> Hey, sorry to sound like a broken record. Has anybody figured out how to re-enable the old system tray for apps like hexchat etc? Running ubuntu 15.04.
[23:33] <Bashing-om> k3asd`: OK, we do this at your convenience . To this time I still look at this as a driver issue.
[23:33] <k3asd`> Bashing-om: I think so
[23:33] <k3asd`> Bashing-om: thanks again, see you tomorrow
[23:34] <a7i3n> bindsym XF86AudioLowerVolume exec /usr/bin/pactl set-sink-volume 0 -- '-5%' no longer works for example...
[23:38] <whallz> hey, question, i use the tilda dropdown terminal, i have it set to have a transparent background, but the thing is it being transparent overlaying a black background, not the actual window or desktop that's behind it
[23:38] <whallz> any advice?
[23:41] <wafflejock> whallz, guake?
[23:42] <wafflejock> whallz, is that what you're using or same concept? I use guake for a drop down terminal that hides at the top of the screen and has a transparent background and shows the windows behind it
[23:43] <MikeRL> I've noticed a bug in 15.04 that was present in 14.10. I haven't reported in a while, but I have a launchpad account. Any suggestions to refresh my mind? I'll Google as well.
[23:43] <daftykins> suggestions as to what?
[23:44] <MikeRL> Said bug is in system-config-printer. It freezes when I tell it under settings to preserve job history and allow reprinting.
[23:44] <MikeRL> I changed the value in dconf via the GUI and it stuck, though.
[23:46] <MikeRL> In human language, that's Printers > Server > Settings > Advanced Server Settings > Preserve Job Files and press OK.
[23:46] <MikeRL> Then, it freezes up.
[23:46] <whallz> wafflejock: it's called tilda, it's similar to guake
[23:46] <daftykins> !bug
[23:46] <MikeRL> Thanks.
[23:48] <MikeRL> Crap. Says it's not installed. I'll research some more.
[23:49] <MikeRL> But I can run system-config-printer, and it pops up.
[23:51] <snow_usa> hi
[23:51] <snow_usa> hello all
[23:51] <MikeRL> It prints out no corresponding package for both system-config-printer and system-config-printer.py
[23:51] <MikeRL> I tried xprop WM_CLASS on the window.
[23:51] <snow_usa> if [ ! "${BASH_XTRACEFD:-}" ]; then
[23:51] <snow_usa>     XTRACE=${XTRACE:-/dev/null};   exec {BASH_XTRACEFD}>"$XTRACE"
[23:52] <snow_usa> could anyone explain me this shell script?
[23:52] <snow_usa> after executing this shell script, echo $BASH_XTRACEFD => 10
[23:52] <snow_usa> i do not know where it is assigned ?
[23:53] <snow_usa> ?
[23:55] <MikeRL> snow_usa, I don't know myself, but hold a bit. People idle a bit on IRC.
[23:57] <daftykins> snow_usa: perhaps going and asking in #bash would make more sense
[23:57] <daftykins> since that's not strictly ubuntu support.
[23:58] <Captonjamason> i need some help
[23:58] <snow_usa> ;)
[23:58] <daftykins> !ask
[23:58] <Captonjamason> and i just told quality about this also
[23:58] <daftykins> you what?
[23:59] <Captonjamason> i went into the #ubuntu-quality chat and told them about my problem
[23:59] <Captonjamason> when i loaded up vivid on my laptop it doesnt look like it installed grub
[23:59] <EriC^^> did you have 2 hdd's?