[00:17] <Tooncenator> hello studio community. another qjackctl question. thanks to holstein, i've made much progress in learning the audio interface setup. I've run into another snag, however. My maudio box has two buses in it. Please forgive my newbie understanding of things...
[00:18] <Tooncenator> I think you would call it two buses. Of course I have both left and right inputs/outputs, but I also have an A/B switch for another set up inputs, etc...
[00:19] <Tooncenator> so my question is - I've recorded a few tracks in Ardour from my keyboard. Woohoo! Now when I play them back, it comes out of the B channel instead of the A channel.
[00:20] <Tooncenator> ...which is a problem because that means I can't play live and hear it at the same time with ardour output. anyone run into this sort of setup before? any advice?
[00:28] <Tooncenator> ...or maybe that's by design??? Because if I try to hear it while layering another track on top of it, wouldn't that also record both the playback AND the live stuff I'm playing? Hmmm....maybe this is more of a "basics" discovery process for me right now.
[01:18] <holstein> Tooncenator: i run my outs to a mixer, and route them, externally, as i pleaser
[01:18] <holstein> please*
[01:19] <holstein> i dont know what maudio hardware you have, but, it could be either only 2 channel, stereo, or, you just need to route to a different pair of outputs in JACK
[01:20] <holstein> i will get something that i know plays, such as, my studio reference tracks playing in audacious via jack, and route them to literally* all* the outputs on the right side of "connect" in qjackctl.. i will then see what outputs are what
[04:11] <Tooncenator> ok holstein. thanks. that's kinda what i was doing - just playing with all the outs. experimenting until i found the right combo. thanks again.
[04:31] <Tooncenator> holstein - any particular open source mixer you recommend?
[05:48] <Tooncenator> oh wait. you're talking about an external mixer - hardware. my little 12-channel mackie is analog only.
[06:17] <OvenWerks> Tooncenator: analog should be fine for monitor mixing, I use an old mackie 1604
[15:13] <holstein> Tooncenator: correct.. analog only
[15:14] <holstein> so, when i need to hear 2 things at once, that im not able to do with software, or with the audio hardware, i run them to 2 (or 4 for stereo sources) channels on the analog mixer, and listen to them
[19:25] <carl_> ubuntu logo derivation
[19:26] <carl_> ubuntu logo derivation
[19:36] <carl_> ubuntu logo
[19:37] <carl_> ubuntu logo history
[19:37] <carl_> ubuntu history'
[19:38] <carl_> canonical
[19:39] <Unit193> carl_: This is a support channel, do you have a support question?