[00:00] <Bashing-om> phix: There is "flashrom" project, but there is a tried and tru method, gimme a bit to find it .
[00:02] <phix> Bashing-om: yes I have installed flashrom (flashrom.org) however it doesn't support my lappy
[00:02] <phix> (I have booted up on a ubuntu CD and I have installed flashrom, I have also downloaded and compiled the latest version too, still no support)
[00:03] <phix> Bashing-om: ok I held down SHIFT and it says GRUB loading, but it is just sitting there
[00:04] <capricorn_one> any MAAS expert here?
[00:05] <phix> Bashing-om: hmmm, I will try a fresh Ubuntu 15.04 install
[00:06] <phix> wooo! it finally showed the grub boot menu
[00:06] <phix> Bashing-om: now what>?
[00:06] <Ademan> Has anyone run into http://stackoverflow.com/questions/6216979/what-is-causing-sprof-to-complain-about-inconsistency-detected-by-ld-so on ubuntu 14.04? Almost every reference to the issue I've found is 4+ years old, yet I'm having the same issue...
[00:07] <Bashing-om> phix: As above, try and boot in "recovery mode" . depending what results is what we do .
[00:07] <phix> Bashing-om: ok, it is taking its sweet ass time though, sitting on Loading initial ramdisk
[00:08] <Bashing-om> phix: UnGood ! .. Maybe the initramfs is corrupted ??
[00:08] <phix> Bashing-om: It was a bit sluggish in 14.04 but not this bad.  You know of any tools that can test if the hardware is all good?  that is, the CPU isn't doing any stupid throttling or ACPI tables are correct or anything like that?
[00:09] <happyfr0gg> What programming languages would someone need to learn to make software compatible with Linux?
[00:09] <phix> Bashing-om: It did pass a memtest 86+
[00:09] <phix> happyfr0gg: any
[00:09] <knocktwice> happyfr0gg: anything not made by microsoft
[00:09] <phix> knocktwice: except for C#
[00:09] <Bashing-om> phix: The better thing to test is to boot up a liveDVD(USB) and then look at the hardware  .
[00:10] <phix> knocktwice: or anything that can be run under mono
[00:10] <happyfr0gg> knocktwice, lol.
[00:10] <knocktwice> phix: I've not tried mono, and only because it was MS-tainted, but you're right.
[00:10] <phix> Bashing-om: what am I looking for>?  dmesg isn't reporting anything like HDD sector read write failures or anything like that to explain why it is being sliggosh
[00:11] <phix> knocktwice: you can even run frontpage extensions in linux if you really  want to as well :P
[00:11] <happyfr0gg> phix, what is mono?
[00:11] <phix> happyfr0gg: What programming languages are you familar with?
[00:11] <Bashing-om> phix: A real quick check IF you have a liveDVD on hand is to boot the liveDVD to the boot options screen and see what results " boot 1st hard drive" option .
[00:11] <phix> happyfr0gg: It is a C# implementation
[00:11] <knocktwice> happyfr0gg: really, you can write C/C++, java, python, javascript, ruby, clojure, lisp, assembly, bash, etc.
[00:12] <knocktwice> happyfr0gg: I've written software in all of those, except ruby and clojure
[00:12] <capricorn_one> let me try again: MAAS sucks! Having problem with importing boot images; it just won't do a damn thing! Tried installation numerous times on different servers (supermicro, cisco) Instructions on ubuntu site are one thing, execution is another. Nothing works in web GUI or the command line.
[00:12] <phix> knocktwice: and brainfuck too!  that is a nice language
[00:12] <happyfr0gg> phix, okay. I am somewhat familiar with HTML.
[00:13] <phix> happyfr0gg: hmmmm, anything else? as HTML isn't a scripting or programming language so you can't really make applications with it
[00:13] <knocktwice> "nice"?
[00:13] <sor_> i have 6 gigs of ram any reason ubuntu reads 4.7?
[00:13] <phix> knocktwice: you only have 8 symbols you can use and an array pointer of either a set size or a variable size :)
[00:14] <Bashing-om> sor_: How much ram does bios report ? As bios only passes off to the operating system what it sees .
[00:14] <knocktwice> happyfr0gg: done any javascript?  w3schools.com... Not that I'm recommending javascript.  It's not a nice language. but it works well with html.
[00:14] <happyfr0gg> phix, no. I understand I need to start learning some programming languages to enhance y skill set. I may use it to make extra $ legally and ethically over the Interwebz.
[00:15] <phix> happyfr0gg: I recommend python as a good starting point
[00:15] <knocktwice> happyfr0gg: I agree: python.
[00:15] <phix> happyfr0gg: easy to learn, useful and works in Linux, unix / mac osx, windows and on mobile devices
[00:15] <knocktwice> happyfr0gg: 2.7.  Wait on 3.0
[00:16] <knocktwice> happyfr0gg: I started learning python less than a year ago and I'm very happy with it.
[00:16] <phix> print "Python is good :)"
[00:16] <sor_> Bashing-om, 6 gigs
[00:17] <knocktwice> phix: how's python on Android these days? I haven't tried it.
[00:17] <phix> happyfr0gg: ok I left it and got a kernel panic
[00:18] <happyfr0gg> I can earn a certificate of completion from the University of Michigan in Python Programming --> https://www.coursera.org/course/pythonlearn
[00:18] <phix> knocktwice: not bad, there is an android app that gives you scripting support in ANdroid.  I have been trying to use jython with little success
[00:18] <sebastian_> I have a cisco n wireless router, when I configured/set it up I used to have windows, now the connection is very crappy and it´s either the router or my laptop´s antenna as wired connection works fine, I don´t want to reset the router because I no longer have the CD and the CD only worked for windows and Mac OS, can I reconfigure the router from ubuntu through the terminal?
[00:18] <sebastian_> I suspect someone might be stealing my signal
[00:18] <phix> Bashing-om: ok I waited a bit and now i have a kernel panic
[00:18] <knocktwice> phix: at the moment I'd need USB support from python for my project.  I think I'm stuck with Java for now.
[00:18] <Bashing-om> sor_: And you have run a " mem_test " from grub's boot menu ? maybe let it run overnight and see that it shows 6 gigs and no errors ?
[00:19] <sor_> Bashing-om, will do thanks
[00:19] <wafflejock> sebastian_, typically you administer the router through a web interface
[00:19] <sebastian_> can i configure a cisco wireless router from ubuntu?
[00:19] <knocktwice> sebastian_: you might just be getting lots of interference.  Maybe change wifi channels?
[00:19] <sebastian_> wafflejock, how can i do that?
[00:19] <wafflejock> sebastian_, check ifconfig, see what your gateway is try typing that up in your browser and see if it asks for username/password
[00:19] <capricorn_one> you may configure cisco from linux either telnet, ssh or serial port
[00:20] <sebastian_> knocktwice, how does one do that?
[00:20] <knocktwice> sebastian_: most people leave their channel on default, so those get crowded.
[00:20] <phix> knocktwice: I am stuck with Java for JasperReports intergration however I am having good success with accessing it with django under jython
[00:20] <Bashing-om> sor_: K, We do need to make sure that the ram chips are compatible, and no errors when tested .
[00:20] <wafflejock> sebastian_, there are apps for the android or iphone like wifi analyzer that show all the signals in the area
[00:20] <knocktwice> sebastian_: it would be a setting in the wifi router configuration, but I dunno past that.
[00:20] <sor_> Bashing-om, just baught it yesterday
[00:20] <sebastian_> here http://paste.ubuntu.com/11507897/
[00:20] <wafflejock> sebastian_, they can tell you which channel is less flooded with traffic and you can typically adjust via the web interface
[00:21] <phix> Bashing-om: not syncing VFS Unable to mount root fs on unknown block(0,0)
[00:21] <knocktwice> brb
[00:21] <wafflejock> sebastian_, in FF or Chrome try http://192.168.1.1 usually the default
[00:22] <Bashing-om> phix: Oh No ... That low level. Might consider running a file system check AND a SMART test ( make sure the hard drive is not failing ) .
[00:22] <wafflejock> sebastian_, you have the model of the router by chance?
[00:23] <sebastian_> YES
[00:23] <sebastian_> wireless n broadband router WRT160N V2
[00:23] <sebastian_> cisco
[00:24] <sebastian_> linksys
[00:24] <wafflejock> sebastian_, k you see the login?
[00:25] <wafflejock> sebastian_, should be blank username and password admin
[00:25] <sebastian_> yes
[00:26] <wafflejock> sebastian_, okay so main thing I'd check/change is the wireless security and use at least WPA not WEP for the encryption since WEP is known to be very weak in terms of getting the password
[00:26] <sebastian_> i cant log in
[00:26] <sebastian_> i enter the login i use to connect to my wifi and it doesnt work
[00:26] <wafflejock> sebastian_, search here for channel http://downloads.linksys.com/downloads/userguide/1224640959708/WRT160N_V10_UG_A-WEB.pdf it has how you can change the wifi channel from 1-11 these are different sets of frequencies around the 2.4GHz range that it can use
[00:26] <happyfr0gg> I am looking at salaries of Python developers on glassdoor. Excellent earnings potential.
[00:26] <knocktwice> sebastian_: you might need to hard-reset your router to get back default
[00:26] <sebastian_> which makes no sense as i am connected on that connection right now on here
[00:27] <wafflejock> sebastian_, it should be a different username and password from the wifi itself
[00:27] <wafflejock> sebastian_, default is no username, admin password
[00:27] <sebastian_> how do i reset it?
[00:27] <wafflejock> if you changed it you can factory reset the router you can still administer it from the web interface in the way you are right now, rarely need the actual "install" disk, I never use them
[00:27] <knocktwice> sebastian_: should be a button to hold down, might need to hold it down while you power it up.
[00:27] <wafflejock> sebastian_, search the guide I linked for factory reset, it's usually just a button on the back
[00:28] <sebastian_> ok so i press that button then what?
[00:28] <knocktwice> sebastian_: then all the settings should be returned to factory defaults: user: admin, no password
[00:28] <wafflejock> sebastian_, you press and hold it usually or boot with it held down, can check the guide for specifics but you'll see the lights flash and it all resets that'll make the username blank and the password admin but you'll need to reconfigure the wifi so be ready to use a cord
[00:28] <wafflejock> other way around knocktwice
[00:29] <wafflejock> says no username password admin
[00:29] <knocktwice> oop, sorry
[00:29] <wafflejock> knocktwice, yeah no worries weird linksys
[00:29] <sebastian_> ok here is what i am going to do wafflejock, i am going to press that button, then i am going to plug the cable into the laptop to retain connection ok?
[00:30] <wafflejock> sebastian_, yup you'll temporarily lose connection as it reboots but should connect after a minute or so
[00:31] <knocktwice> sebastian_: you can reconnect to it at 192.168.0.1 or something.  Whatever it defaults to.
[00:31] <sebastian_> ok
[00:32] <sebastian_> i took the power cable out then put it back in holding the reset
[00:32] <sebastian_> then reconnected to it
[00:32] <wafflejock> sebastian_, yeah instructions say Reset There are two ways to reset the Router’s
[00:32] <wafflejock> factory defaults. Either press and hold the Reset
[00:32] <wafflejock> Button for approximately five seconds, or restore
[00:32] <wafflejock> the defaults from Administration > Factory
[00:32] <wafflejock> Defaults in the Router’s web-based utility.
[00:32] <wafflejock> sorry all my bad
[00:32] <sebastian_> the signal seems very strong but i am sitting right next to it too
[00:33] <sebastian_> now what do i do?
[00:34] <sebastian_> I am unsure of what´s going on right now, i dont know if it has been reset to factory defaults or not
[00:34] <sebastian_> if i get away from the router the connection gets shitty again
[00:35] <wafflejock> sebastian_, try holding down the button for 5 seconds, do you have a phone you could check the signal strength with?
[00:35] <sebastian_> wafflejock
[00:35] <sebastian_> can you hear me
[00:35] <wafflejock> sebastian_, also keep in mind radio frequency is just another kind of electromagnetic wave and it's not blocked by everything that blocks light but it does still get blocked by certain materials more than others and does much better with a clear line of sight than through lots of walls
[00:36] <sebastian_> I am sure now that i have reset it
[00:36] <sebastian_> all the lights on it blinked
[00:36] <wafflejock> okay
[00:36] <wafflejock> so just try to login again
[00:36] <wafflejock> http://192.168.1.1
[00:36] <wafflejock> and use no username and the password is admin
[00:45] <penos> is linux kernel v4 any good?
[00:46] <bazhang> try #kernel penos
[00:49] <knocktwice> I've got an ubuntu14.04/drupal problem if anyone has done a recent install?
[00:50] <knocktwice> scratch that, it's a (debian|ubuntu)+drupal problem
[00:51] <capricorn_one> what's the drupal problem?
[00:51] <knocktwice> On a recent install (one debian, one ubuntu) both time cron is sending me email saying it can't access drupal7/cron.php and I can't figure it out
[00:52] <knocktwice> installed from apt-get
[00:52] <knocktwice> web server seems to be denying access, but I can't get apache's .htaccess to give it up, or maybe that's a red herring...
[00:53] <capricorn_one> try locate drupal7/cron.php to see if it's on the server anywhere
[00:53] <knocktwice> yes, it's there.
[00:53] <knocktwice> and apache gives 403 error
[00:53] <capricorn_one> is the cron job using correct path?
[00:54] <knocktwice> I'd think apache would give 404 if it was the wrong path, but I'll check
[00:54] <capricorn_one> they see apache log what the cron job is really asking for.
[00:54] <capricorn_one> s/they/then
[00:54] <cryptodan> check permissions
[00:55] <knocktwice> 127.0.0.1 - - [01/Jun/2015:07:00:01 -0500] "GET /drupal7/cron.php HTTP/1.1" 403 4526 "-" "curl/7.35.0"
[00:55] <capricorn_one> is that cron job for drupal part of package install?
[00:55] <knocktwice> yes
[00:56] <capricorn_one> can you see it under crontab -l
[00:56] <happyfr0gg> How do I check if Grub is installed? Does Grub install with Ubuntu or is Grub separate?
[00:56] <knocktwice> which makes me nervous about just giving out public access to cron.php
[00:56] <capricorn_one> check the script that's calling that url. Perhaps run it manually
[00:58] <knocktwice> no, but /etc/cron.d/drupal7 has the script, and the path is set -- so it looks like apache is denying access to the file
[00:58] <knocktwice> I've tried (and failed) to modify .htaccess to give access to the file, but I'm not sure if that's the right thing to do.
[00:59] <knocktwice> the file is world-readable, but .htaccess has special rules for php -- which I've tried to circumvent.
[00:59] <OerHeks> happyfr0gg, grub comes with ubuntu, so if you can boot ubuntu, you are oke
[00:59] <knocktwice> maybe I need a .htaccess expert
[00:59] <Bashing-om> happyfr0gg: ' grub-install --version ; sudo debconf-show grub-pc ; sudo grub-probe -t device /boot/grub ' as well as others, depending on the level of info you seek .
[00:59] <OerHeks> and the !grub factoid :-)
[01:00] <sebastian__> wafflejock
[01:00] <cryptodan> knocktwice: does regular requests work to the server
[01:00] <knocktwice> cryptodan: yes, but there are special rules for .php files in the .htaccess, and I'm no expert at .htaccess.
[01:01] <capricorn_one> knocktwice what happens when you use a browser?
[01:01] <capricorn_one> asks for password?
[01:01] <sebastian__> knocktwice, where is wafflejock?
[01:01] <cryptodan> I would check for permissions to verify that the user running the cronjob as execute rights
[01:01] <knocktwice> 403 -- not authorized.
[01:03] <knocktwice> so 1) I don't know that the debian package has actually got things right (debian+drupal has other problems)
[01:03] <cryptodan> knocktwice: try it without the .htaccess
[01:03] <knocktwice> and 2) I don't know that allowing public access to the cron.php file is the right thing to do.
[01:03] <knocktwice> cryptodan: good idea.
[01:03] <cryptodan> if it fails then its an apache / permission issue
[01:04] <knocktwice> have to reload apache2?
[01:04] <cryptodan> you shouldnt
[01:04] <capricorn_one> knocktwice doing this on production server?
[01:04] <knocktwice> ooooooh, still denied.  It's not that .htaccess file that's the problem
[01:05] <knocktwice> capricorn_one: of course not
[01:05] <knocktwice> thanks cryptodan... new trail to follow
[01:06] <capricorn_one> I would run the script that is trying to connect to that URL manually.
[01:06] <nicomachus> hi guys, I'm trying to boot a live usb and am getting this bug: https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1342626
[01:06] <capricorn_one> what's written in? bash?
[01:06] <nicomachus> however I can't Tab out of it to get to the menu screen.
[01:06] <nicomachus> which most users seem to be able to do.
[01:07] <nicomachus> I also tried typing 'help' and 'live'
[01:07] <nicomachus> no response
[01:09] <reborn> heyyy i have installed telegram, but i can't find apps telegram, any idea?
[01:12] <OerHeks> reborn, there isn't a telegram build in our repo's, maybe in a PPA
[01:13] <reborn> nvm, i find ppa from noobslab.
[01:14] <reborn> it seem unable, and error. errr
[01:15] <nicomachus> if I download the 15.04 image from ubuntu, and then burn it to a live disc, does it have the 3.19 kernel?
[01:16] <potato_farmer> nicomachus, looks like it: https://wiki.ubuntu.com/VividVervet/ReleaseNotes
[01:17] <nattynambiar>  /msg NickServ VERIFY REGISTER nattynambiar nrfidwnqajmj
[01:17] <nicomachus> haha uh....
[01:17] <sorch> oh... days..
[01:17] <potato_farmer> yeah man, change that pw
[01:17] <sorch> ^
[01:17] <nattynambiar> fuuck fu
[01:17] <ivan_on_trac> By UpStart. How to run script in backgroud. Without the script be starting and stopping all the time.
[01:17] <nicomachus> always afraid I'm gonna do that one day.
[01:18] <nicomachus> thanks potato_farmer. Can I create a live disc with an older kernel?
[01:18] <reborn> Try manjaro.
[01:18] <knocktwice> UpStart?
[01:19] <nicomachus> I made a lubuntu live USB, but I'm guessing it's still a later kernel. and my PC is still running 3.13
[01:19] <reborn> have you heard about manjaro linux?
[01:19] <sorch> nicomachus, what version of ubuntu are you running at the moment?
[01:19] <sorch> reborn, yes... I host a mirror for it
[01:20] <nicomachus> sorch: upgraded from 14.10 to 15.04 today, when I rebooted I got stuck in GRUB
[01:20] <reborn> sorry, i was talk to nicom
[01:20] <sorch> stuck?
[01:20] <sorch> oh reborn ok
[01:20] <nicomachus> if I select any option, it reboots.
[01:20] <nicomachus> and goes back to GRUB
[01:20] <nicomachus> so I'm trying to do boot-repair, but I have to boot a live version
[01:20] <sorch> that is not good...
[01:21] <nicomachus> tell me about it. which part?
[01:21] <capricorn_one> try to boot from live CD and select boot from first hard drive
[01:21] <reborn> What did you created bootable apps?
[01:21] <capricorn_one> then fix grub
[01:21] <EriC^^> nicomachus: hi, are you in grub right now?
[01:21] <nicomachus> EriC^^: I can be...
[01:21] <EriC^^> are you in a live usb?
[01:22] <nicomachus> I was but it was just giving me the 'gfxboot.c32: not a COM32R Image' error
[01:23] <nicomachus> in GRUB now. or I can stick in a live disc. or I can use plop boot manager to boot from live usb again
[01:23] <reborn> nicomachus, what did you created boot apps?
[01:23] <EriC^^> if you can boot a live usb easily that'd be best
[01:23] <EriC^^> otherwise we can try booting from grub
[01:23] <nicomachus> it won't boot, EriC^^
[01:23] <nicomachus> I get this bug: https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1342626
[01:24] <nicomachus> but I can't TAB through it like most users say they can
[01:24] <reborn> You need to reinstall, but you need to create boot in Gnome Disk along with USB, it would be best for you.
[01:24] <EriC^^> nicomachus: ok, type ls -l in grub
[01:24] <nicomachus> reborn: if I could get a live version to boot, I would consider that option.
[01:25] <nicomachus> EriC^^: from the grub command line?
[01:25] <EriC^^> nicomachus: yeah
[01:25] <reborn> hmm.
[01:25] <nicomachus> oh boy.
[01:26] <EriC^^> nicomachus: we just need to know the partition's like hd0,msdos1 etc.
[01:26] <nicomachus> "Device hd0: No known filesystem detected - Sector size 512B etc...."
[01:26] <nicomachus> I can't paste or screenshot, unfortunately.
[01:26] <EriC^^> is there an hd1 ?
[01:26] <joaojeronimo> Hey guys, I'm getting "no space left errors" (both ENOSPC and others) but both df and df -i report that there is space and inodes left: http://pastebin.ubuntu.com/11508954/ is there any other thing I could check to see what's happening ?
[01:26] <penos> nicomachus, lololol...
[01:27] <penos> nicomachus, install windows ;-)
[01:27] <nicomachus> partition hd0 msdos1 says Filesystem type ext
[01:27] <EriC^^> nicomachus: ok, great, type ls (hd0,msdos1)/
[01:27] <nicomachus> penos: thanks for being helpful. If you wanna send me $90 via paypal, I'll do that
[01:27] <reborn> penos, He learning .
[01:27] <EriC^^> and give me an idea of what's there
[01:27] <somsip> !behelpful | penos
[01:28] <nicomachus> lost+found, memtest, and a bunch of kernel packages, looks like
[01:28] <EriC^^> like vmlinuz... and initrd?
[01:28] <EriC^^> i think that's your /boot partition then
[01:29] <nicomachus> yes.
[01:29] <EriC^^> type configfile (hd0,msdos1)/boot/grub/grub/cfg
[01:29] <EriC^^> type configfile (hd0,msdos1)/boot/grub/grub.cfg
[01:29] <capricorn_one> joaojeronimo you might have a process writing to a file that's been removed but the file is actually still there. Is that under /var?
[01:30] <nicomachus> I'm in a new window now, EriC^^
[01:30] <EriC^^> what new window?
[01:30] <EriC^^> type boot
[01:30] <reborn> terminal?
[01:30] <joaojeronimo> capricorn_one, yes this happens while writing to /var. Something like that would yield a no space left error ?
[01:30] <nicomachus> error: you need to load the kernel first.
[01:31] <nicomachus> and it's more like the window just cleared and I had a fresh command line
[01:31] <somsip> joaojeronimo: I note that /run/cgmanager/fs is very small. I dont know what that is but does it need to be bigger?
[01:31] <reborn> so it is terminal.
[01:31] <Razzdoll> I need some help and just using google myself if not helping since I might be the most idiotic person when it comes to this stuff. Can someone help me find a good, small usb adapter that will work for linux. I have one, but it won't work.
[01:31] <nicomachus> yea but it's still the limited grub terminal
[01:31] <joaojeronimo> capricorn_one, it also happens from time to time when I use reflex (a utility that watches files for changes and runs a process when there is a change). It gives the no space errors right when it's starting to watch the files
[01:31] <EriC^^> nicomachus: ok, are there any other partitions? hd0,msdos2 maybe?
[01:32] <nicomachus> there was but that info cleared out. one sec
[01:32] <somsip> Razzdoll: this is ubuntu support. You need a hardware recommendation, so not here.
[01:33] <joaojeronimo> somsip, I have no idea what that is, but yes it's at 100%. But I didn't mount that, isn't it something ubuntu would mount and use on it's own ? Do you have one ?
[01:33] <nicomachus> EriC^^: no other partitions have any filesystem detected. just hd0,msdos1
[01:33] <somsip> joaojeronimo: no. It's just that if something is trying to save a largish file to that partition, it could be your error
[01:33] <nicomachus> but there is also hd0,msdos5 (could be an S)
[01:34] <nicomachus> its a 5
[01:34] <somsip> joaojeronimo: something to do with containers. https://linuxcontainers.org/cgmanager/introduction/
[01:34] <joaojeronimo> somsip, and that is happening when reflex watches files, so fsnotify would try to write to that or something ?
[01:34] <Razzdoll> somsip, Ok meanie :-)
[01:34] <somsip> joaojeronimo: what version of ubuntu are you running?
[01:34] <EriC^^> nicomachus: ok, type ls (hd0,msdos5)/
[01:34] <joaojeronimo> somsip, 15.04
[01:35] <nicomachus> unknown filesystem
[01:35] <somsip> joaojeronimo: and do you have anything specifically lxc/container-ish running?
[01:35] <joaojeronimo> somsip, I've had but not at the moment. The docker daemon is not even running
[01:35] <nicomachus> but that msdos5 is the bulk of my HDD. 976GB
[01:36] <nicomachus>  /boot is only 256MB
[01:37] <somsip> joaojeronimo: where exactly are you getting 'no space left' errors? When you do what?
[01:37] <EriC^^> nicomachus: ok, do you have a live usb or live cd?
[01:37] <nicomachus> could it be the kernel, EriC^^? /boot is showing 3.19, and I was using 3.13 before. It's a rather old PC
[01:38] <joaojeronimo> somsip, it's happening when I use utilities that watch files for changes, namely reflex (https://github.com/cespare/reflex) and gulp
[01:38] <EriC^^> nicomachus: i guess that's the kernel of 14.10
[01:39] <nicomachus> alright well this live disc is 14.04 so it shouldn't be an issue
[01:39] <EriC^^> is it a cd?
[01:39] <somsip> joaojeronimo: if other system software is running as expected, it may be something you need to contact the author of reflex about
[01:39] <joaojeronimo> somsip, this is what happens: http://pastebin.ubuntu.com/11509165/ look at lines 5 and 21
[01:39] <nicomachus> yea... the BIOS on this PC won't boot from USB, unless I use the plop boot-manager disc
[01:40] <nicomachus> but I wanna try the cd first because I was getting that bug with the USB
[01:40] <EriC^^> oh ok, give it a shot
[01:40] <rik_ferreira> hey, i have a problem with my keyboard, i cannot keep pressing one key and print it repeated times, when I hold the r key for instance, it prints one "r" and not a lot of "r". Does anyone knows why?
[01:41] <capricorn_one> joaojeronimo: this is why I always create more than one partition in Unix systems. At least it's easier to tell which one is running out of space.
[01:41] <joaojeronimo> somsip, I have the felling it will happen with anything that will use inotify, just don't know how to test it in isolation
[01:42] <somsip> joaojeronimo: nothing to do with ubuntu maybe https://github.com/gulpjs/gulp/issues/217
[01:42] <joaojeronimo> capricorn_one, in this case is not a partition, it's some kind of device that is mounted with 100 bytes
[01:42] <capricorn_one> joaojeronimo check to make sure that reflex thingie is not running tons of processes not closing the files in large make jobs or some such
[01:42] <nicomachus> EriC^^: I get this error: http://imgur.com/5kTvyZd
[01:42] <nicomachus> EriC^^: it's a common error I get with this PC when I boot, and I usually just restart and it boots up fine. No dice. Happens every time with the live CD
[01:43] <joaojeronimo> capricorn_one, somsip yep, apparently there were too many files to watch!
[01:43] <joaojeronimo> thanks guys
[01:43] <nicomachus> I've been chasing that error for a few months now. Thought it was RAM, replaced that... no idea now.
[01:44] <joaojeronimo> somsip, raising the inotify max files to watch limit helped, on that issue page
[01:44] <EriC^^> nicomachus: it's a bad cd
[01:44] <somsip> joaojeronimo: it looked like it would
[01:44] <EriC^^> try cleaning it with alcohol if you can't make another right now, it might work
[01:45] <nicomachus> I just made it. :(
[01:45] <nicomachus> an hour ago.
[01:45] <EriC^^> make another
[01:45] <knocktwice> the curse of spinning media.  Soon it will be no more.
[01:45] <EriC^^> nicomachus: wait a sec
[01:46] <EriC^^> nicomachus: put the live usb in and when you reach grub as usual type ls -l and see if it shows up
[01:46] <Razzdoll> Well if anyone has knowledge of a good wireless usb adapter for linux, I'd appreciate your help
[01:46] <nicomachus> I can't reach grub from the live usb
[01:46] <EriC^^> i know, boot to grub as usual and then put the live usb
[01:46] <io> 123
[01:46] <nicomachus> (welcome to my hell of the last 5 hours)
[01:46] <nicomachus> ahhhh I see!
[01:47] <io>  /msg NickServer test
[01:47] <neuron> hello
[01:47] <neuron> is it possible to install ubuntu linux
[01:48] <sebastian_> wafflejock
[01:48] <neuron> on a portable hard disk
[01:48] <knocktwice> neuron: yes
[01:48] <neuron> I am using an office laptop that is running on Windows 7
[01:48] <knocktwice> neuron: might be harder to get the host computer to boot off of it.
[01:48] <neuron> admin people do not allow us to run VM on our laptop
[01:49] <neuron> oh ok
[01:49] <nicomachus> they probably won't allow a usb boot then
[01:49] <neuron> yup
[01:49] <neuron> that's what they did
[01:49] <neuron> any work arounds
[01:49] <nicomachus> EriC^^: no change in ls -l
[01:49] <knocktwice> ouch
[01:49] <knocktwice> got an SD card slot? or is that locked down too?
[01:49] <nicomachus> ^crafty
[01:49] <neuron> there is an SD card
[01:50] <neuron> so I need to buy an SD card then
[01:50] <knocktwice> might work.
[01:50] <neuron> like how
[01:50] <knocktwice> works on Raspberry Pi...
[01:50] <neuron> knocktwice: please advise me how to do it
[01:50] <neuron> I need it badly
[01:50] <OerHeks> breaking company rules is offtopic for ubuntu support.
[01:51] <neuron> OerHeks: I need my project to run on ubuntu
[01:51] <knocktwice> neuron: Uh... I've never tried to boot a laptop from an SD card.... and... what OerHeks said.
[01:51] <neuron> OerHeks: I am not hacking too
[01:52] <knocktwice> so, your company wants you to make a project that runs on ubuntu, but you don't have an ubuntu laptop?
[01:52] <capricorn_one> neuron fire your admins
[01:52] <neuron> capricorn_one: lol
[01:52] <knocktwice> +1
[01:52] <EriC^^> nicomachus: try making another cd i guess
[01:52] <neuron> those people take time to process request
[01:52] <neuron> I cannot wait
[01:52] <nicomachus> ok, EriC^^. Would it be better to burn at a slower speed?
[01:52] <neuron> I need to start my project is quite huge and there is only two of us working on it
[01:53] <nicomachus> neuron: google it.
[01:53] <knocktwice> how much do you want to spend?  You can get an ok laptop for $300 easy.
[01:53] <neuron> nicomachus: tried but all I got are those conventional stuff
[01:53] <neuron> such as booting up in cd
[01:53] <neuron>  or using VMs
[01:53] <capricorn_one> boot from CD (or USB), resize other OS partition and install Ubuntu on gained partition.
[01:53] <reborn> dell launch ubuntu edition laptop.
[01:53] <neuron> or booting on USB stick
[01:54] <knocktwice> drop the nerfed laptop, get something useful.
[01:54] <neuron> I tried those
[01:54] <EriC^^> nicomachus: yeah
[01:54] <neuron> but not much luck though
[01:54] <neuron> knocktwice: any advice
[01:54] <knocktwice> I've heard you can netboot kalilinux, but I don't know anything else about it
[01:54] <neuron> I just need ubuntu OS
[01:54] <neuron> that is all
[01:54] <neuron> so that can start development
[01:55] <reborn> neuron, what's the problem?
[01:55] <knocktwice> afk
[01:55] <neuron> I want to use office laptop running on Windows 7
[01:55] <somsip> !persistent | reborn (you've been given this advice already)
[01:55] <neuron> to run ubuntu distro
[01:55] <neuron> so that I can start development on my project
[01:55] <reborn> huh?
[01:56] <neuron> IT guys back at the office told me it takes two weeks to process such request
[01:56] <somsip> reborn: apologies - aimed at neuron
[01:56] <reborn> have a tried Gnome Disk to boot usb?
[01:56] <capricorn_one> neuron; you two people working on large ubuntu project and no server? Time to send email to the manager or one level above ...
[01:56] <neuron> so I plan to install ubuntu on my portable hard disk and run it from there
[01:56] <somsip> neuron: install using to a USB stick/drive/SDCard using this approach https://wiki.ubuntu.com/LiveUsbPendrivePersistent
[01:56] <reborn> accepted apologies, somsip
[01:56] <neuron> capricorn_one: this is a php development
[01:57] <capricorn_one> Ubuntu from USB drive is going to be slow; There is no "old PCs" laying around your office or at IT guys?
[01:58] <neuron> capricorn_one: this people are playing politics
[01:58] <neuron> so my partner and I got victims
[01:58] <capricorn_one> understood. Seen that.
[01:58] <neuron> once this project is done those guys will have a whacking from our boss who is overseas
[01:59] <somsip> neuron: and you've been given the answer you need, and now you're just complaining. Do you need help with a persistent install?
[01:59] <neuron> other project leaders are pissed as well
[01:59] <nicomachus> yo neuron: https://stackoverflow.com/questions/18529623/where-can-i-get-a-virtual-machine-online
[01:59] <neuron> no I am reading it
[01:59] <somsip> neuron: k - reduce the offtopic chatter then please
[02:01] <neuron> somsip: no problem
[02:01] <reborn> what a wasted time we gave this guy.
[02:04] <capricorn_one> ubuntu police: is there MAAS specific channel? I can't seem to find it. Thanks.
[02:05] <somsip> !alis | capricorn_one
[02:06] <nicomachus> EriC^^: same error on the new disk, burned at 2.5x
[02:07] <reborn> CD?
[02:07] <capricorn_one> thanks.
[02:07] <nicomachus> yep.
[02:07] <reborn> TRY usb?
[02:08] <DrProximo> hiya
[02:08] <nicomachus> been there, reborn..
[02:08] <DrProximo> n00b alert
[02:08] <nicomachus> https://imgur.com/qbYAG02
[02:08] <DrProximo> finally getting around to clearing my parents old computer and trying a ubuntu install...
[02:09] <DrProximo> the all-in-one download i found isn't compatible with my specific model of USB drive for some reason, can anyone recommend a more "universal" install?
[02:09] <nicomachus> reborn: with a USB, I get stuck on this bug: https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1342626
[02:09] <reborn> okay, give it a try rufus with usb.
[02:10] <nicomachus> the USB is fine.
[02:10] <reborn> https://rufus.akeo.ie/
[02:10] <nicomachus> it was made with Startup Disk Creator
[02:10] <nicomachus> and I'm able to boot my gf's Windows laptop just fine with it.
[02:10] <happyfr0gg> Why doesn't my Ubuntu Trusty contain a device.map file, normally located in /boot/device/????
[02:10] <Redmega> Anyone know if upgrading a win partition to win10 will override any linux distros you have installed?
[02:10] <reborn> i hate starupdisk it has issue.
[02:12] <knocktwice> DrProximo: I've had luck with "hybrid-iso" releases, such as mint
[02:12] <reborn> i always use Gnome Disk, no problem.  i was recommend by webpud8
[02:13] <EriC^^> nicomachus: if grub shows the usb somehow you could boot it from there
[02:13] <happyfr0gg> Nevermind, I found my answer --> http://askubuntu.com/a/567001
[02:13] <nicomachus> EriC^^: even if the BIOS doesn't boot by USB? (it'll boot from freaking floppy though)
[02:13] <EriC^^> nicomachus: are there any workarounds for the error you get when you boot the usb usually? maybe a kernel parameter you can pass?
[02:14] <EriC^^> nicomachus: yeah it'll boot it like any other hdd
[02:14] <nicomachus> all of the bug reports list a few: pressing 'TAB', entering 'help', entering 'live'. but none work
[02:14] <Bashing-om> happyfr0gg: Do you mean The device.map file is located in /boot/grub/ It isn't required but can be used in Grub 2.
[02:15] <Razzdoll> does ubuntu have a 'keyring', and if so where can I find it to back it up (the file name). My password must get asked about five million times (exaggerating)
[02:15] <nicomachus> Thanks for all the help EriC^^: I'm going to try a few more things later but now I'm going to get a beer and a cigarette and play with my cat for a bit.
[02:16] <EriC^^> nicomachus: ok, no problem
[02:19] <knocktwice> Razzdoll: keyring for what?
[02:20] <Razzdoll> My passwords like root sudo etc
[02:20] <knocktwice> AFAIK, no, but if you're going to have to do a bunch of stuff as root you can just become root for a while "sudo su".  Not recommended though.
[02:21] <psusi> sudo -s involves the execution of one fewer program
[02:21] <EriC^^> Razzdoll: they're one-way encrypted and stored in /etc/shadow
[02:22] <EriC^^> Razzdoll: the most you can do is set sudo to not ask for a password, or use sudo -i if you want to have a root shell for a while
[02:22] <EriC^^> ( both not recommended )
[02:23] <happyfr0gg> Bashing-om, yes. I had to create the file by following the directions as indicated here --> http://askubuntu.com/a/567001
[02:25] <happyfr0gg> Several weeks ago I installed XFCE, changed the wallpapers in LXDE, XFCE and Ubuntu/Unity. For some reason, the login wallpaper returns to the default as was installed.
[02:25] <Bashing-om> happyfr0gg: Yep, done that too in the past to remap my drives . Works.
[02:28] <happyfr0gg> I am not able to change the default login wallpaper. How do I change it to one that I prefer?
[02:28] <jjchr2> It is because they all use different configuration files.
[02:29] <pertplus> is it normal to have a vmlinuz.old link on a fresh install?
[02:29] <psusi> I swear you could also change the timeout after which sudo asks for your password again, but now I can't find the damn thing
[02:29] <jjchr2> @ happyfr0gg
[02:29] <pertplus> linked to an older kernel ? I guess so you can downgrade?
[02:31] <EriC^^> psusi: timestamp_timeout=<value>
[02:31] <aijoho> do you all stick with firefox or have a different preferred browser?
[02:32] <EriC^^> psusi: -1 for never, 0 for every time
[02:32] <jjchr2> @Razzdoll
[02:32] <jjchr2> you can change your root password by typing sudo passwd
[02:32] <Redmega> If I dual boot ubuntu and win7, and upgrade win7 to win10, will there be any issues with my ubuntu installation?
[02:33] <EriC^^> Redmega: that might happen yeah, in win10 writes to the mbr
[02:33] <EriC^^> *if
[02:33] <happyfr0gg> jjchr2, where do I find the config files for each of the DEs? I would like to change the default login pichture.
[02:33] <EriC^^> Redmega: you can always boot a live usb and reinstall grub to fix it
[02:33] <pertplus> can someone with a fairly normal/default system paste me their ls -l /boot ?
[02:34] <jjchr2> they should be in the /etc/lightdm folder
[02:34] <EriC^^> happyfr0gg: probably in ~/.config
[02:35] <EriC^^> happyfr0gg: make sure you own all the files in your home dir and the permissions are correct
[02:35] <lucas-arg> hey all... is there any way to figure out if my screen has touch capabilities? ive bought an ultrabook, but i didnt even try it with windows ive installed ubuntu right away
[02:35] <Darkwing> pertplus: http://paste.ubuntu.com/11510167/
[02:35] <psusi> pertplus, why?
[02:37] <pertplus> Darkwing: thank you
[02:37] <Darkwing> pertplus: Of course
[02:37] <pertplus> psusi: im trying to figure out whether this system is a fresh install or an upgrade of previous
[02:37] <pertplus> can you tell me, is it normal to have vmlinuz.old link, linked to another kernel image in boot, with a fresh install?
[02:38] <psusi> pertplus, I don't have one, but that doesn't mean it comes from an upgraded system
[02:38] <psusi> I believe it simply comes from compiling your own kernel
[02:39] <maxosa_> does anyone have experience getting grub and efi to play nice on OSX?
[02:39] <pertplus> im trying to figure out if this system existed before April 30 - the two links in / to kernel images are dated April 30
[02:40] <pertplus> and they link to what looks like default kernel - vmlinuz-3.2.0-23-generic-pae and the same but 3.2.0-40
[02:40] <psusi> pertplus, you might check /var/log/installer for the logs made during installation
[02:40] <pertplus> ill try that, thanks
[02:41] <psusi> pertplus, the -pae kernel was dropped quite a while ago
[02:42] <psusi> pertplus, and I guess 3.2.0 is from 12.04... you ought to upgrade to 14.04
[02:44] <Razzdoll> Sorry EriC^^ I was afk. Yes, the keyring. Maybe unbuntu doesn't have it.
[02:49] <knocktwice> Razzdoll: is that a PowerShell thing?
[02:51] <Razzdoll> knocktwice, no. I think 'debian' has it, and I ubuntu is based off debian, right? So that is why I thought it has it.
[02:52] <nicomachus> EriC^^: this is pretty unbelievable.
[02:52] <nicomachus> I got a live usb to boot. and it's either frozen on the language selection screen, or not registering key presses
[02:55] <OerHeks> nicomachus, what are the specsof that machine?
[02:55] <knocktwice> Razzdoll: yes, there are keyrings, but usually for inter-computer connections.  Not for same-machine login connections
[02:56] <knocktwice> gpg uses keyrings, and ssh uses an ssh-agent
[02:56] <nicomachus> OerHeks: Asus socket 775 mobo, core 2 duo
[02:57] <nicomachus> this live usb is 12.04.
[02:57] <Razzdoll> knocktwice, Oh. So there is no password plain text manager out there?
[02:58] <edrr_comptr> hello, i have problem. i try: df -T . one of my partition (ntfs disk) changed to fuseblk, how to repair it?
[02:59] <knocktwice> Not such as I think you're thinking of.  I type my password many times per day, and change it fairly frequently too.
[02:59] <Razzdoll> knocktwice, well thanks for that info. I guess its typing it daily ;)
[02:59] <nicomachus> the mobo and cpu need replaced, and the RAM upgraded, but it ran 14.04 and 14.10 just fine OerHeks
[03:00] <knocktwice> edrr_comptr: thanks.  I had no idea my boot partition was still ext2
[03:00] <nicomachus> it was still on the 3.13 kernel, though, and when I upgraded to 15.04 it upgraded the kernel to 3.19
[03:01] <knocktwice> Razzdoll: choose a password that's easy to type :)
[03:01] <knocktwice> Razzdoll: you'll type it enough that memorizing it isn't a problem.  Just long and easy to type :)
[03:01] <edrr_comptr> knocktwice, thx. but can help me?
[03:01] <Ademan> I want to install fglrx straight from ATI (they have an appropriate deb) it conflicts with fglrx-updates from the repositories. How can I *atomically* remove fglrx-updates and install this deb?  dpkg -i fglrx[...].deb just whines about the conflict then quits
[03:02] <knocktwice> edrr_comptr: sorry, no.  I only have the barest idea what fuseblk is.
[03:03] <CuteStat> how much is your website worth? find out at http://www.criosphinx.net/site-worth     for more information visit https://www.criosphinx.net  - Sell your website for top dollar get a free apparaisal
[03:06] <knocktwice> eddr_comptr: wait, maybe.  fuse is the system that allows users to mount files within the userspace, rather than kernelspace
[03:07] <knocktwice> eddr_comptr: are you sure there's a problem?  Maybe it's just mounted under /media in userspace and all is ok.
[03:07] <knocktwice> eddr_comptr: you may be able to unmount it from /media, and remount it as root as ntfs
[03:08] <EriC^^> my ext hdd's ntfs shows up as fuseblk i think
[03:09] <EriC^^> so does my internal hdd's ntfs in df -T
[03:09] <knocktwice> ok, so maybe that's normal
[03:09] <knocktwice> (now)
[03:14] <sdgfsagsa> hi what do I do about a formatted windows ESP partition? I only have the linux efi partition, and can not get back into windows
[03:17] <EriC^^> sdgfsagsa: you could try to recover the files and put them in your linux efi partition using testdisk
[03:17] <EriC^^> testdisk recovers files pretty easily with fat32, so it might work
[03:17] <sdgfsagsa> Eric^^: no chance of recovery, I have no idea where to find the partition, and this is an ssd
[03:18] <EriC^^> sdgfsagsa: make sure not to overwrite your current partition table though, just copy the Boot and Microsoft dir's, press p over the partition then C or c to copy
[03:18] <EriC^^> sdgfsagsa: install testdisk and it will find the partition
[03:18] <EriC^^> sudo apt-get install testdisk
[03:19] <sdgfsagsa> okay I'll give it a go
[03:19] <cipherstoner> i'm having issues installing ubuntu on a usb, it keeps booting into grub. does anyone have a fix?
[03:20] <EriC^^> sdgfsagsa: if it doesn't work i guess you need to use a windows cd to create a new efi partition or if it can use the current one
[03:25] <soapy__> yoo
[03:25] <soapy__> hello?
[03:25] <soapy__> any1?
[03:26] <soapy__> #ubuntu
[03:26] <wafflejock> soapy__, what's the ?
[03:27] <soapy__> i have no idea what I am doing
[03:27] <soapy__> lol
[03:27] <soapy__> this is my 1st time trying linux >_>
[03:27] <wafflejock> soapy__, well what are you trying to accomplish? this is an ubuntu support channel so support questions can get answers or at least suggestions
[03:27] <soapy__> nothing i was just messing around
[03:27] <soapy__> thanks for offer though
[03:27] <wafflejock> soapy__, join #ubuntu-offtopic if you just want to chat
[03:27] <soapy__> ok sure
[03:28] <Razzdoll>  Ok one more issue, well two actually. Sound plays everywhere else but Firefox web browser, and YouTube videos do not play in Firefox on youtube.com. Any ideas
[03:29] <Pifa> Razzdoll: flashplayer maybe ?
[03:30] <Razzdoll> Pifa, na... I just uninstalled and reinstalled it, it did not help
[03:30] <sdgfsagsa> thanks EricC^^: didnt expect that to work, but it did!
[03:30] <sdgfsagsa> now, should I be able to just copy that to the linux EFI partition, or make a new one?
[03:32] <Pifa> Razzdoll: you can play muzic or movie via player but no inernet browser ?
[03:32] <Razzdoll> yes
[03:32] <Pifa> hmm,
[03:32] <Razzdoll> VideoLAN player, not firefox
[03:33] <Pifa> maybe system - preferences - sound
[03:33] <Pifa> what are the options there ?
[03:33] <Pifa> playback options
[03:34] <Pifa> PulseAudio ?
[03:34] <Pifa> i dont have ubuntu , just guessing
[03:34] <Razzdoll> All it says is choose a device for sound output. I went to system settings, then sounds
[03:34] <Razzdoll> Pifa this is ubuntu 15.04
[03:35] <Pifa> my server is on ubuntu 15.04 but no GUI :D
[03:35] <Pifa> well
[03:35] <Pifa> anything that says PulseAudio?
[03:35] <Razzdoll> no
[03:35] <diretora> ola pessoal
[03:36] <diretora> alguem do brazil?
[03:36] <diretora> testando touchpad
[03:36] <diretora> sorry
[03:36] <xangua> !pt
[03:36] <Pifa> Razzdoll: did this happen after the update ?
[03:36] <diretora> oi #lkd
[03:36] <Razzdoll> Pifa, no update,f resh install
[03:36] <diretora> ubuntu br
[03:37] <diretora> i need help
[03:37] <knocktwice> ?
[03:37] <hamnstar> Razzdoll what are you trying to listen to in the browser? do you know if its using flash player?
[03:37] <hamnstar> or, trying to use flash player
[03:37] <knocktwice> brb
[03:38] <Razzdoll> hamnstar, it is www.youtube.com, their video player.
[03:38] <diretora> meu teclado desconfigura e abre janelas aleatoriamente !!! oq eu faço????????? #ubuntu-br
[03:39] <nome> Taken from askubuntu:  Running pulseaudio -k then pulseaudio -d should restart pulseaudio and temporarily fix your issue. For a more complete fix that doesn't stop working, I had to download the latest flash and install manually. This should work for you on firefox - other browsers may need the libflashplayer.so placed elsewhere.
[03:39] <Pifa> sounds like flash player or codec issue
[03:39] <diretora> talk to me
[03:40] <Pifa> install flashlib
[03:40] <hamnstar> Razzdoll try this out https://www.youtube.com/html5?gl=CA see what your browser is supporting
[03:40] <knocktwice> diretora: Lo siento.  Este no es #ubuntu-br.  Comprendo poquito espanol, pero no brasiliano
[03:41] <mate|venom> hello everyone.
[03:41] <mate|venom> someone here?
[03:41] <diretora> certo
[03:41] <diretora> hello
[03:41] <diretora> hi
[03:41] <nome> hola
[03:41] <knocktwice> diretora, you've got a keyboard problem?
[03:41] <mate|venom> having audio problems with my ubuntu mate installation
[03:41] <diretora> yes
[03:41] <mate|venom> it seems to play audio too fast
[03:42] <Razzdoll> Holy crap hamnstar.. I went there and selected Request HTML5  Player, and it works! Everything!
[03:42] <Pifa> is everyone having audio issues
[03:42] <Razzdoll> What just happened?
[03:42] <diretora> An hour keyboard works Another time he Madden
[03:42] <mate|venom> No Pifa, I was just greeting everyone here. I am having audio issues
[03:42] <hamnstar> Razzdoll - it must've been trying to use flashplayer which is a nonfree plugin
[03:43] <hamnstar> ie needs to be installed separately from the browser
[03:43] <Pifa> hamnstar: good one
[03:43] <Pifa> did not know that
[03:43] <knocktwice> diretora: nothing in between? no programs? no other changes?
[03:43] <Razzdoll> Thank you hamnstar, and thank you Pifa for trying toh elp :-)
[03:43] <Razzdoll> to help ;)
[03:44] <diretora> no, I just format , and the problem continues
[03:44] <hamnstar> Razzdoll no probs.  I recommend using google chrome for ultimate web compatability, i find it works more stabley-y on ubuntu lately
[03:45] <rookjie> yea seems same with chrome here
[03:46] <mate|venom> my audio playback is too fast, and intermittent. Any thoughts?
[03:46] <Ademan> the fglrx-updates package says 15.200 but the newest fglrx I can find on AMD's website (for any card) is 14.12. I can't seem to coax any other version numbers out of fglrx, what the heck?
[03:47] <hamnstar> mate|venom which programs are you experiencing this in?
[03:47] <hamnstar> and have you done anything outside of the default config, incl but not limited to installing jackd?
[03:49] <knocktwice> anyone have advice for resetting a keyboard to a good Brazillian layout?
[03:49] <knocktwice> s/he says the keys are opening windows randomly
[03:50] <mate|venom> hamnstar, its general, everysound that comes out of playback seems faster than normal and intermittent
[03:50] <mate|venom> system sounds, pandora, vlc
[03:51] <hamnstar> mate|venom whats the hardware? onboard/laptop or a specific soundcard?
[03:51] <mate|venom> I have ubuntu mate 15.04 installed on acer aspire one za3 ao751h-1145
[03:52] <bodhi_zazen> mate|venom, you need to configure the sound card
[03:52] <bodhi_zazen> sec ...
[03:53] <mate|venom> hamnstar, this is the output of lspci http://paste.ubuntu.com/11511467/
[03:53] <mate|venom> bodhi_zazen, how do I do that?
[03:53] <bodhi_zazen> looking ...
[03:53] <bodhi_zazen> I have the same box
[03:53] <bodhi_zazen> identify the sound card
[03:54] <mate|venom> how do i identify the sound card?
[03:54] <wafflejock> mate|venom, its 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07) in your lspci output
[03:54] <Nikesh> I am running a slightly modified version of Ubuntu 14.10 for the Acer Chromebook C720 (https://www.distroshare.com/distros/get/50/) The kernel seems to lack iptables_nat (modprobe: FATAL: Module iptable_nat not found.) - How can I fix this without altering the rest of the set up?
[03:55] <bodhi_zazen> mate|venom, http://blog.bodhizazen.net/linux/sound-on-intel-811b/
[03:56] <Nikesh> That is, do I need to recompile the kernel? And if so, how can I /only/ modify this aspect, or whatever else it depends on, and keep the rest of the special Chromebook settings?
[03:59] <hamnstar> Nikesh: although I can't offer any advice, I'm curious as to why you would need that on a chromebook?
[04:00] <mate|venom> bodhi_zazen, thanks or that link, i have modified the default.pa file. I guess I have to do a reboot to test?
[04:00] <mate|venom> or is there a way I can avoid a reboot?
[04:02] <Nikesh> hamnstar: It seems to be causing Docker to fail
[04:02] <Nikesh> hamnstar: http://stackoverflow.com/questions/30557294/how-can-i-resolve-nat-table-does-not-exist-on-ubuntu-14-10-15-04-to-get-docker error message output there
[04:02] <Razzdoll> hamnstar, i do like g-oogle chrome, i didnt realize it came for linux
[04:03] <fowl> hi there why howcome i cant install this? its says E: Package 'pharo-vm-core-i386' has no installation candidate, its listed here https://launchpad.net/~pharo/+archive/ubuntu/stable
[04:03] <fowl> i added ppa
[04:05] <mate|venom> bodhi_zazen and hamnstar, here is more info about my sound device: http://paste.ubuntu.com/11511592/
[04:05] <hamnstar> Nikesh: if you havn't looked at this already, might be worth your attention: http://askubuntu.com/questions/325534/how-can-i-fix-an-iptable-nat-compilation-issue-on-ubuntu-12-04   other than that I'm as stumped as you are
[04:05] <wafflejock> fowl, did you sudo apt-get update after adding the ppa
[04:05] <fowl> yes
[04:07] <hamnstar> fowl whats youre version
[04:07] <hamnstar> ubuntu version*
[04:07] <hamnstar> ...your* cant type today
[04:07] <mate|venom> here is ouput of aplay -l command http://paste.ubuntu.com/11511640/
[04:09] <fowl> hamnstar, 15.04
[04:15] <hamnstar> fowl: looks like they dont have it for 15.04 yet - on the page you listed, there is no entry for "vivid vervet"
[04:15] <mate|venom> ok bodhi_zazen and hamnstar will try a reboot right now.
[04:15] <mate|venom> will be right back after reboot.
[04:16] <fowl> hamnstar, can i force it to install the latest version then?
[04:16] <hamnstar> fowl: there is probably a way (via aptitude) at your own risk... in these situations i usually wind up compiling from source
[04:18] <hamnstar> fowl i assume you already tried the instructions here? http://pharo.org/gnu-linux-installation
[04:20] <fowl> hamnstar, thats where i get the error pharo-vm-core-i386 but it is not installable
[04:21] <hamnstar> fowl, you may want to try #pharo
[04:21] <mate|venom> bodhi_zazen, thank you very much! I rebooted and audio works great!
[04:21] <mate|venom> but have another problem now
[04:21] <hamnstar> fowl: or maybe bug the developers about 15.04 via mailing list
[04:22] <mate|venom> :( software updater is chrashing
[04:22] <fowl> i think i installed the wrong OS
[04:22] <hamnstar> fowl: For stability, I recommend sticking to LTS versions of Ubuntu (ie 14.04.2)
[04:23] <hamnstar> I've been burned many times trying the latest ubuntu with new software as well :/
[04:24] <mate|venom> having this problem : http://paste.ubuntu.com/11511854/
[04:25] <hamnstar> mate|venom is it hanging? I dont see any errors there
[04:26] <Juon> hiii
[04:26] <Juon> anybody where ?
[04:26] <Juon> here ??
[04:26] <Juon> sorry
[04:26] <hamnstar> hello
[04:26] <XChat> hey
[04:26] <Juon> hiiii
[04:26] <xubuntu58w> Help anyone? On LXLE, I installed LXDM. Rebooted and it worked well, but I didn't like it, so I removed it (sudo apt-get remove lxdm). Now the computer is stuck on a booting screen for 10+ minutes
[04:27] <Juon> anybody use pidgin which gpg/pgp key ?
[04:27] <Nikesh> hamnstar: Thanks for the guidance..
[04:27] <bodhi_zazen> mate|venom, you are most welcome
[04:27] <xubuntu58w> anyone knowledgable about lxdm?
[04:27] <mate|venom> nevermind hamnstar it is working now.
[04:29] <XChat> xubuntu58w: try this, drop to advanced options,  enable networking, ctrl + alt + f1 login with your username and sudo apt-get reinstall xubuntu-desktop
[04:30] <xubuntu58w> XChat: I can't get past the loading bar on the LXLE startup boot
[04:30] <xubuntu58w> any solutions I could do from a liveusb?
[04:30] <XChat> can't you drop to grub before boot screen?
[04:31] <xubuntu58w> Don't know what that is :/
[04:31] <hamnstar> xubuntu 58w sometimes you can hit ctrl+] i think, and it will switch from loading bar to actual output
[04:31] <hamnstar> xubuntu58w^
[04:31] <hamnstar> and then you might be able to glean where its hanging
[04:32] <xubuntu58w> I just clicked ctrl+alt+] and it went to an odd screen
[04:32] <xubuntu58w> ah
[04:32] <XChat> like login screen?
[04:33] <xubuntu58w> the screen it went to has a 2 column list. on the left, it has * [text here] --- and on the right it says " [OK] " or [FAIL]"
[04:33] <xubuntu58w> it has 2 fails listed
[04:33] <hamnstar> yeah, what are those fails?
[04:34] <xubuntu58w> one being LXDE Display Manager (the thing that I removed after installing which caused this issue)
[04:35] <xubuntu58w> XChat: will reinstalling the desktop remove personal files and applications?
[04:35] <XChat> nope
[04:36] <xubuntu58w> XChat: how do I drop to advanced options?
[04:36] <xubuntu58w> it's lxle btw
[04:38] <XChat> it should be same, boot your pc and keep pressing ESC, you will drop to grub, in that screen select the advanced options for xubuntu
[04:38] <xubuntu58w> XChat: oh you mean BIOS?
[04:38] <XChat> yeah
[04:38] <XChat> enable networking there, and then ctrl + alt + f1
[04:38] <XChat> then login with your account
[04:39] <XChat> and finally you can reinstall the desktop
[04:39] <xubuntu58w> ok I'm in grub :)
[04:39] <codygman> I installed ubuntu on a macbook with osx and now I can't boot OSX. I'm led to a black screen with an apple and a loading animation, then a circle with a slash through it.. whatever those are called.
[04:39] <codygman> All I did was resize a partition afaik.
[04:39] <XChat> fine, enabled networking yet?
[04:39] <christopher> Milo
[04:40] <christopher> Hello
[04:40] <XChat> hi chris
[04:40] <Guest3523> How is everyone?
[04:40] <blackfi_sh> life sometimes sux
[04:40] <XChat> i'm good myself, don't know the others :P
[04:40] <XChat> you?
[04:41] <xubuntu58w> XChat: there's no option to enable networking. only four options from which to boot, two of which are recovery modes
[04:41] <Guest3523> Im fine
[04:41] <blackfi_sh> i want a small help from someone who knows how to use cmake. Anyone?
[04:42] <XChat> recovery modes first, yeah
[04:42] <XChat> sorry lol
[04:42] <xubuntu58w> XChat: I can also click "c" to go into command line before going into any of the boot options
[04:43] <XChat> i think you need enable networking first
[04:43] <XChat> need to*
[04:43] <xubuntu58w> okay, I i'm at the recovery menu, just clicked enable networking
[04:44] <neuron> just want to ask
[04:44] <neuron> anyone here knows what command to type in irc to find a channel
[04:45] <XChat> good, ctrl + alt + f1 now or just simply drop to root shell
[04:45] <lotuspsychje> !alis | neuron
[04:45] <neuron> alis
[04:45] <neuron> /!alis
[04:45] <lotuspsychje> neuron: read it first
[04:46] <blackfi_sh> anyone good with cmake? i need a little bit help writing a CMakeLists.txt!
[04:46] <aimnano> any open SSH gurus around?
[04:46] <lotuspsychje> aimnano: did you try the #openssh channel?
[04:46] <aimnano> i am waiting for a response, yes
[04:46] <xubuntu58w> XChat: "couldn't find support for device at /sys/devices/pc xxxxx'': not supported by any plugin "
[04:46] <lotuspsychje> blackfi_sh: maybe the ##programming channel can help?
[04:46] <neuron> "/msg alis help list"
[04:46] <blackfi_sh> where can i find a cmake guru?
[04:47] <XChat> oh, are using wifi?
[04:47] <xubuntu58w> yeah
[04:47] <XChat> that's bad ¬_¬
[04:47] <xubuntu58w> should I plugin ethernet or is it too late?
[04:47] <Ben64> blackfi_sh: find out by asking your actual question
[04:47] <XChat> i had the same problem with it
[04:47] <XChat> switched to cable
[04:47] <XChat> if you can, yeah
[04:48] <xubuntu58w> XChat: can I back out or do I reboot with and do it again?
[04:48] <XChat> it should work now i guess, give a try
[04:49] <xubuntu58w> oh shit!
[04:49] <xubuntu58w> it worked
[04:49] <xubuntu58w> <3
[04:50] <blackfi_sh> @Ben64, if I post a link to my question in stackoverflow, will I look like spamming?
[04:51] <Ben64> blackfi_sh: no
[04:51] <xubuntu58w> aterdeus: what was the command again?
[04:52] <blackfi_sh> @Ben64, I've asked a question on cmake with all the relevant logs here: http://stackoverflow.com/questions/30586812/how-to-write-cmakelists-txt-for-libusb
[04:57] <phix> W: Failed to fetch https://security.ubuntu.com/ubuntu/dists/vivid-security/universe/binary-amd64/Packages  Failed to connect to security.ubuntu.com port 443: Connection refused
[04:58] <phix> So I can only get security updates using an insecure / plaintext protocol? makes sense.....
[04:58] <lotuspsychje> phix: did you try sudo apt-get update
[04:58] <phix> lotuspsychje: apt-get update displayed the errors
[04:58] <aterdeus> which desktop you want to install again?
[04:59] <lotuspsychje> phix: not router of firewall block?
[04:59] <phix> lotuspsychje: not that I can tell, I am allowed to use https, I mean my main repo is using https and it was allowed
[04:59] <lotuspsychje> !aptlock | phix maybe this?
[05:00] <phix> lotuspsychje: ? I can so a apt-get update it is just the security and partners repos tell me they are refusing connection on https, http works
[05:00] <phix> s/so/do/
[05:02] <phix> lotuspsychje: gone quite now?
[05:02] <phix> quiet even
[05:03] <lotuspsychje> phix: maybe it blocks port 443 on your system..
[05:03] <InFlames> can someone help me rid my system of cinnamon so i can install 15.04?
[05:04] <lotuspsychje> InFlames: wich ubuntu version are you on now?
[05:05] <InFlames> i've tried sudo apt-get remove cinnamon, with --purge, purge, and with cinnamon*, but everytime i try to sudo apt-get update && sudo apt-get dist-upgrade it tells me it's gonna install 'cinnamon-translations'
[05:05] <InFlames> lotuspsychje, i'm on 14.04
[05:05] <lotuspsychje> InFlames: its not reccomended to upgrade from LTS to a non-LTS
[05:05] <lotuspsychje> InFlames: install 15.04 fresh if you want
[05:06] <InFlames> why is that not recommended
[05:06] <lotuspsychje> InFlames: 15.04 is only 9 months support
[05:07] <lotuspsychje> InFlames: the whole design is to keep lts and non-lts seperated to upgrade
[05:08] <InFlames> well, this will be my last ditch effort before finding a new os, so i'd like to just  try this and see what i think of 15.04
[05:09] <lotuspsychje> InFlames: whats wrong with 14.04?
[05:09] <lotuspsychje> InFlames: ubuntu is the most populare Os in the world
[05:10] <HewloThere> Hi there guys, I run a Minecraft server and was wondering it would be possible to start the Minecraft server as a serice?
[05:10] <HewloThere> service *
[05:10] <lotuspsychje> HewloThere: wich ubuntu server?
[05:10] <InFlames> well this cinnamon issue is a daily annoyance, there is no hibernation so my laptop just shuts off, the low battery warning is way too subtle, disconnecting my external monitor causes all the windows to be stuck on the missing monitor, when the laptop goes to sleep the hardware mute is enabled, and that's all off the top of my head lotuspsychje
[05:11] <HewloThere> Ubuntu 14.04.2 LTS
[05:11] <lotuspsychje> InFlames: install synaptic perhaps to completely purge cinnamon
[05:12] <lotuspsychje> HewloThere: maybe this can help? https://computerobz.wordpress.com/2014/06/13/how-to-minecraft-server-on-ubuntu/
[05:12] <andy___> Hi.
[05:13] <lotuspsychje> andy___: welcome, what can we do for you?
[05:13] <andy___> I have a question related to a script.
[05:13] <lotuspsychje> andy___: ask in the channel mate
[05:13] <leafiest> andy___: what kind of script?
[05:14] <andy___> I need to paste it to a server.
[05:14] <lotuspsychje> andy___: can you explain a bit what you are trying to do?
[05:15] <andy___> I would like to post to the Internet from a script.
[05:15] <neuron> lotuspsychje: just want to ask you
[05:15] <andy___> This posts to a file:
[05:15] <leafiest> HTTP post?
[05:15] <andy___> echo  $var$'\t'$(date --iso-8601='seconds') >> ~/bin/note.log
[05:15] <neuron> usually when you install php
[05:15] <phix> lotuspsychje: no it doesn't
[05:16] <neuron> where can you find the php.ini
[05:16] <lotuspsychje> phix: maybe try other sources?
[05:16] <HewloThere> lotuspsychje, that's all well and good but I'm looking to be able to do e.g. "service minecraft start" rather than using screens.
[05:16] <phix> Are you telling me you can goto https://security.ubuntu.com/ubuntu ?
[05:17] <phix> lotuspsychje: what other source does security-updates?
[05:17] <leafiest> HewloThere: With screen, you get to see the server's output though. A service (daemon) would hide that
[05:17] <andy___> !paste
[05:17] <lotuspsychje> phix: cant reach on that page neither
[05:17] <phix> lotuspsychje: so what's wrong with it?
[05:18] <InFlames> lotuspsychje, so synaptic?
[05:18] <phix> Is this a known issue?>
[05:18] <HewloThere> leafiest, I could use it start a wrapper then? I don't really need the console anyways. I have the logs and in-game for that.
[05:18] <lotuspsychje> !sources | phix
[05:18] <InFlames> maybe the ppa is in my apt-cache since i see it when i type sudo apt-cache search cinnamon
[05:18] <InFlames> how can i identify and remove the ppa?
[05:19] <lotuspsychje> !ppapurge  | InFlames
[05:19] <leafiest> HewloThere: You can daemonize it yourself then with something like "nohup". Look up detaching a process from it's terminal
[05:19] <HewloThere> Thanks.
[05:19] <InFlames> lotuspsychje, identify the ppa...
[05:19] <andy___> Here is my full script:
[05:19] <andy___> http://paste.ubuntu.com/11512829/
[05:19] <andy___> It only saves the output to a small file.
[05:19] <lotuspsychje> InFlames: adding a ppa is always on your own risk...
[05:20] <andy___> lotuspsychje, Have I provided enough information, so that you can answer my question?
[05:20] <InFlames> lotuspsychje, i need to remove the ppa, not add it, how can i search for it
[05:21] <lotuspsychje> InFlames: thats what ppapurge does, remove it
[05:21] <InFlames> lotuspsychje, i need to IDENTIFY then REMOVE, i need to know the ppa first
[05:21] <lotuspsychje> InFlames: check your sources
[05:22] <InFlames> ugh
[05:22] <wafflejock> InFlames, you can look in your /etc/apt/sources.list
[05:22] <InFlames> nevermind
[05:22] <InFlames> found it
[05:22] <InFlames> thanks wafflejock
[05:22] <wafflejock> np
[05:23] <bojan> I have 8 GB RAM in my ubuntu computer and i want to add another 8 GB RAm...IS there any procedure for that or i can simply add  that??
[05:24] <bojan> note:My swap space is 8GB
[05:24] <lotuspsychje> bojan: you can just add hardware
[05:24] <andy___> bojan, That sounds like a hardware question.
[05:24] <lotuspsychje> andy___: what will you be doing with that script?
[05:24] <bojan> Then what about swap memory??
[05:24] <lotuspsychje> bojan: what about it
[05:25] <bojan> lotuspsychje:How to ad swap memory??
[05:25] <lotuspsychje> !swap | bojan
[05:25] <andy___> lotuspsychje, I want to modify it to send a note to wordpress, or twitter, or git, or to update a webpage.
[05:26] <thomedy> okay im trying to understand port forwarding a little better is this a good room to ask questions
[05:26] <bojan> lotuspsychje
[05:26] <bojan> lotuspsychje:okay
[05:26] <leafiest> thomedy: there's a networking channel!
[05:26] <lotuspsychje> !iptables | thomedy
[05:26] <netrunner_> i like frog
[05:26] <IdleIRC> also try gufw, gui for ufw, graphical way to display
[05:26] <lotuspsychje> netrunner_: this isnt he channel to spam random things
[05:27] <leafiest> ufw already so easy though
[05:27] <InFlames> wafflejock, i am trying to remove cinnamon from my machine so when i upgrade to 15.04 it doesn't keep telling me it wants to install it, i checked etc/apt/sources.list, it's not there, how can it still be telling me it's going to install it (after trying to install it it kills the upgrade)
[05:28] <lotuspsychje> InFlames: why dont you make your life easy and just fresh install 15.04?
[05:28] <sebastian_> wafflejock, you there?
[05:29] <InFlames> lotuspsychje, no part of reconfiguring this entire machine makes my life "easier"
[05:30] <lotuspsychje> !backup | InFlames
[05:30] <lotuspsychje> InFlames: i already suggested you its not reccomended to upgrade from lts to a non-lts
[05:31] <InFlames> ok, let's make this hypothetical lotuspsychje, if i was on 14.04 and ugprading to 14.10, would still be telling me to start fresh
[05:31] <script-beginer13> about photo manager shotwell: is it possible to show filenames (not "title") in shotwell?
[05:31] <InFlames> lotuspsychje, i am trying to fix a problem, not just upgrade
[05:31] <leafiest> Is there a schedule for when 15* will be LTS?
[05:31] <InFlames> and reconfiguring an entire machine is a nightmare
[05:31] <Ben64> leafiest: never. next lts is 16.04
[05:31] <Ben64> InFlames: then ask about your problem?
[05:31] <leafiest> Yikes
[05:31] <InFlames> and i doubt any backup solution will be fast, easy, or remotely accurate
[05:31] <InFlames> Ben64, I have, for the entire duration i've been here
[05:32] <lotuspsychje> leafiest: enjoy 14.04 meanwhile :p
[05:32] <Ben64> InFlames: your "problem" involves upgrading
[05:32] <InFlames> No, upgrading presents the hint at the problem
[05:32] <andy___> !lts
[05:32] <InFlames> my problem is "why is cinnamon trying to install on upgrade?
[05:32] <Ben64> so don't upgrade?
[05:32] <lotuspsychje> InFlames: you added the ppa at your own risk..
[05:32] <leafiest> !Trusty
[05:33] <InFlames> lotuspsychje, and i'm trying to remove it, so you're saying "can't help me due to my adding a ppa"?
[05:33] <InFlames> if you are say so, it'd be much clearer
[05:33] <lotuspsychje> InFlames: i already triggered to the ppapurge procedure
[05:33] <lotuspsychje> InFlames: not my fault you dont try it
[05:33] <InFlames> which isn't of use if one doesn't know the ppa
[05:33] <InFlames> which i then found the ppa, and manually removed it
[05:34] <InFlames> and here we still are
[05:34] <lotuspsychje> InFlames: wich someone already pointed you to sources list
[05:34] <InFlames> and i removed it
[05:34] <InFlames> actually before he said that, but that'
[05:34] <InFlames> s semantics
[05:34] <Ben64> did you use ppa-purge? if not, the packages aren't removed
[05:34] <andy___> leafiest, There is no schedule of when 15* will be LTS.  There may be a schedule of what the next LTS will be.
[05:35] <lotuspsychje> andy___: codename has yet to come
[05:35] <lotuspsychje> !release | andy___
[05:35] <InFlames> i removed it via gui 'software & updates', but it still does it
[05:35] <InFlames> but i tried the upgrade another way, and it miiiiiight be working, who knows
[05:36] <Ben64> InFlames: good luck with that
[05:37] <InFlames> thanks Ben64
[05:37] <capricorn_one> andy___: I rewrote your script a bit http://paste.ubuntu.com/11513008/ I recommend using variables and functions in your scripts. I created a ton of functions that I source at the beginning of most scripts.
[05:37] <lotuspsychje> andy___: next non-lts is wily and can be found in #ubuntu+1
[05:38] <InFlames> Ben64, what's a recommended way to store the configuration for a machine including development environments, specific tools, folder structures, etc
[05:38] <capricorn_one> Also, don't mix "bin" and "data files" that's 'ugly' in my opinion.
[05:38] <andy___> capricorn_one, Thanks a lot.
[05:38] <lotuspsychje> InFlames: rsync and aptoncd can make your life easier
[05:39] <lotuspsychje> !cookie | capricorn_one
[05:39] <capricorn_one> andy; you can simply cut/paste the function into one of your terminals with bash and test it.
[05:42] <andy___> capricorn_one, I got an error message when I tried.
[05:44] <capricorn_one> "error message" is not enough. you may open private channel to let me know what happens
[05:44] <andy___> capricorn_one, Is what you posted something you just made, or did you paste it from one of your working projects?
[05:49] <capricorn_one> should be -> read -p "$prompt" var  here is function tested in my bash http://paste.ubuntu.com/11513336/
[05:51] <ocx> hello i want to create a menu in my xwindows that looks like the menu that runs on your access point when accessed via a webbrowser, it needs to have sections a menu, buttons text field etc, what is a good tool/language to use to achieve this?
[05:54] <andy___> capricorn_one, I am not sure what you are trying to teach me through this script?  I guess it is good, once I get it to work, but I was just wondering how to post to the Internet, in the same way I have been taking notes?
[05:55] <capricorn_one> andy: your script was vague so I could not tell what you tried with it. If you want to "post on the internet" you can simply "dump" html formatted file to apache subdirectory.
[05:56] <andy___> capricorn_one, I am sorry I did not mean to hurt your feelings.
[05:57] <capricorn_one> create a function that will create html page framework and drop variables in it to provide "live data"
[05:57] <capricorn_one> of course python would be better for this than bash.
[05:58] <capricorn_one> robot response: I have no feelings andy.
[06:01] <andy___> !feelings
[06:09] <andy___> capricorn_one, I have your function working now.  I thought it was designed to be a script at first.  I guess I will open the private channel if you have any more information about it.
[06:13] <wafflejock> sebastian_, back now
[06:13] <wafflejock> sebastian_, you get everything updated?
[06:14] <neuron> anyone here have some ideas about configuring smtp
[06:14] <neuron> using php
[06:14] <christopher> Oh hello.
[06:14] <sebastian_> wafflejock, thank you for all your help, all systems working now
[06:15] <sebastian_> new ubuntu installed right
[06:15] <sebastian_> and my wifi is significantly better
[06:19] <wafflejock> sebastian_, awesome glad to hear it
[06:20] <sebastian_> you were very helpful, thank you
[06:20] <wafflejock> sebastian_, no problem glad to help
[06:21] <wafflejock> neuron, php mail command will just use whatever is configured on the system you can use sendmail or postfix if you need something more complex or something like Amazon SES
[06:23] <neuron> wafflejock: yeah problem is I got this error message when I tested my codeigniter
[06:23] <neuron> Unable to send email using PHP mail(). Your server might not be configured to send mail using this method.
[06:23] <neuron> and I do not know what do to now
[06:24] <neuron> I read a forum from stackoverflow it says it got something to do with the configuration on php.ini
[06:24] <wafflejock> neuron, simplest way I know is this http://techknight.eu/2014/12/09/send-mail-witg-google-smtp-ubuntu-14-04/
[06:24] <neuron> however I am scared to change anything on the php.ini without any degree of certainity
[06:24] <neuron> certainty
[06:25] <wafflejock> neuron, you can do, cat /etc/php5/apache2/php.ini | grep -i -n mail, to see all the places it's referenced in the php.ini
[06:26] <wafflejock> neuron, can copy a backup of your php.ini before changing anything if you need to
[06:26] <wafflejock> but pretty sure you just need to configure ssmtp or postfix to deal with sendmail on a system level
[06:26] <neuron> wafflejock: yup that one is not an issue
[06:26] <neuron> what I need to change in the php.ini is something I want answer about
[06:26] <neuron> but I cannot find it on google
[06:27] <neuron> I tried those in stackoverflow still not working
[06:28] <wafflejock> neuron, follow the steps here to test the smtp connection itself outside of php http://techknight.eu/2014/12/09/send-mail-witg-google-smtp-ubuntu-14-04/
[06:28] <wafflejock> neuron, if that works then can deal with php.ini, after you make changes in there need to sudo service apache2 restart
[06:37] <nusr> kinda off topic: where can i host a mybb forum for free?
[06:37] <somsip> nusr: yep. Off topic and doesn't belong here
[06:38] <nusr> yeah somsip, but ubuntu is the best.
[06:38] <somsip> nusr: flattery will get you directed to #ubuntu-offtopic
[06:38] <nusr> lul
[06:38] <nusr> ok
[06:42] <penos> hello
[06:42] <wafflejock> neuron, any progress?
[06:43] <penos> !ubuntu
[06:43] <penos> !ot
[06:43] <wafflejock> penos, you can private message ubottu
[06:43] <somsip> !msgthebot | penos (why can't you just behave in here?)
[06:44] <cfhowlett> 4real!
[06:44] <Alexxsz> good evening ladies and guys. I need help with a raspberry pi 2 with ubuntu MATE
[06:44] <Alexxsz> anyone could help me
[06:44] <Alexxsz> ?
[06:44] <somsip> Alexxsz: ask the real question and someone will if they can
[06:44] <Alexxsz> I want to install Tor Browser
[06:44] <Mike9863> Can someone help me with gparted? I'm not sure how to move unallocated space to expand my root partition. Here's the setup: http://i.imgur.com/pFg3ZG0.png
[06:45] <Mike9863> I want to expand sda1
[06:45] <Alexxsz> I simply want to install Tor Browser here
[06:45] <hateball> Mike9863: then you're going to have to resize the other partitions first
[06:45] <cfhowlett> Mike9863, join the unallocated to /dev/sda6 first
[06:46] <somsip> Alexxsz: it depends whether that is available for the Pi on that version of ubuntu. I have no idea, and #rasbpi or the author of the Ubuntu Mate PPA for Rasbpi may be the best places to ask
[06:47] <Mike9863> After I join it to sda6, I have to resize sda6, move it to the right, then do the same with sda5?
[06:47] <wafflejock> Alexxsz, yeah need to know where you're stuck or what you tried, this looks promising but is outside of #ubuntu support realm https://ubuntu-mate.org/raspberry-pi/
[06:47] <hateball> Mike9863: Yes
[06:48] <hateball> Mike9863: Or you could also wipe the swap partition and add it to the unallocated space. But that will give it a new uuid so you'd have to adjust /etc/fstab accordingly
[06:48] <Alexxsz> I'm very new in linux. I have tryed to follow the intalation instructions from the Tor Web site
[06:48] <Alexxsz> and it keeps with errors like
[06:49] <Alexxsz> This may mean that the package is missing, has been obsoleted, or
[06:49] <Alexxsz> is only available from another source
[06:49] <Alexxsz> E: Package 'epiphany-extensions' has no installation candidate
[06:49] <Alexxsz> that was for epyphany browser, sorry
[06:52] <wafflejock> Alexxsz, so couple of things here, what version of ubuntu did you install, use lsb_release -a, to get the version, the problem can basically be that the repositories don't have packages built for certain things you need on the ARM architecture used by the raspberry pi processor, so if you can't add a repo that has those dependencies built you end up having to build them from source yourself which can be very difficult
[06:53] <wafflejock> oh gone, ah well
[06:54] <penos> can u have more than one root?
[06:54] <penos> can u have more than one root directory?
[06:54] <somsip> penos: to what end?
[06:56] <penos> somsip, proof of concept
[06:58] <penos> i want to have 50 root directories
[06:58] <Johnny_Linux> silly
[06:59]  * cfhowlett poises finger over the /ignore button and watches expectantly
[07:00] <main> hi!!!
[07:00] <penos> hello
[07:01] <cptmashek> Hallo!
[07:03] <penos> what if we have multiple passwords for each user? u need to get all those passwords correct to log in
[07:04]  * somsip joins cfhowlett 
[07:04] <cfhowlett> penos, you have a working system.  experiment on your system and stop asking nonesensical questions here.
[07:05] <penos> !ot | cfhowlett
[07:06] <neuron> somsip: I tried install smtp
[07:06] <somsip> neuron: why do I need to know this?
[07:07] <neuron> somsip: I wanted to send mail using php
[07:07] <neuron> I was reading and googling around
[07:07] <jjchr2> Me too @neuron
[07:07] <neuron> I got informed that I need to install smtp
[07:07] <somsip> neuron: you need a mail transport. Different thing
[07:08] <somsip> *mail transport agent
[07:08] <neuron> somsip: what do you mean
[07:08] <neuron> ok to put my question into context
[07:08] <neuron> I am following a tutorial unfortunately the author failed to mention about any required configuration
[07:08] <neuron> when I invoke a send mail function from codeigniter
[07:08] <jjchr2> @neuron if you would like to setup email I read mail is simple to setup.
[07:09] <neuron> I got an error message
[07:09] <neuron> saying
[07:09] <neuron> your php my not be configure to send mail
[07:09] <neuron> jjchr2: what do you mean
[07:10] <neuron> Unable to send email using PHP mail(). Your server might not be configured to send mail using this method.
[07:10] <somsip> neuron: because you need to configure it first
[07:10] <neuron> jjchr2: so I do I go about that
[07:11] <neuron> somsip: that's it
[07:11] <neuron> that is what I want to learn
[07:11] <neuron> when I started googling
[07:12] <neuron> I learn I got two options I mean hints for me
[07:12] <somsip> neuron: http://php.net/manual/en/mail.configuration.php
[07:12] <neuron> either through php.ini
[07:12] <neuron> or install smtp
[07:12] <somsip> neuron: this is offtopic for here. If someone wants to help you in PM, fine. But you need the ##php channel
[07:13] <neuron> somsip: ok no problem
[07:13] <neuron> ps though
[07:13] <neuron> the channel ##php nobody is there
[07:13] <neuron> I went there
[07:13] <neuron> and found no one
[07:14] <somsip> neuron: there are 663 people in there
[07:14] <neuron> somsip: I just type /join ##php and it got me to nowhere
[07:14] <somsip> !register | neuron
[07:15] <neuron> what is this !register | neuron
[07:16] <somsip> can you read the line immediately after I trigger that?
[07:21] <owen1> how to enable docker? i tried `sudo update-rc.d docker enable` but `sudo service --status-all |grep docker` =>  [ - ]  docker
[07:21] <owen1> (i mean how to start docker on boot)
[07:23] <somsip> owen1: possibly one of http://stackoverflow.com/questions/26137834/starting-docker-as-daemon-on-ubuntu http://www.liquidweb.com/kb/how-to-install-docker-on-ubuntu-14-04-lts/
[07:25] <histo> owen1: systemctl
[07:25] <owen1> i am on ubuntu 15.04 btw
[07:26] <histo> owen1: then use systemctl to enable and disable services
[07:26] <indoctrinated> I'm willing to bet it's something like this: sudo systemctl enable docker
[07:26] <owen1> histo: thanks! i'll 'man' it
[07:27] <yacc> Any idea what do if ubuntu online accounts do not allow me to authenticate to google (the password is right, I can login via web, and a different google account shows up as logged in)
[07:38] <Wahm200> hey all
[07:38] <Wahm200> can i run ubuntu on virtualbox environment
[07:39] <hateball> Wahm200: Yes
[07:39] <Zeurt> hi, I try to use database session on sqlite, I created the migration with payload and last_activity, change SESSION_DRIVER to database in .env but I got this error  Database [1] not configured. any idea ?
[07:39] <Zeurt> oups
[07:39] <Zeurt> wrong chat
[07:51] <Wahm200> is 10 gig enough hateball
[07:52] <hateball> Wahm200: For installing it? Yes. As for what you intend to use it for? I have no idea.
[07:52] <Wahm200> awesome thanks
[08:01] <histo> Wahm200: yes 10gb is plenty
[08:01] <Wahm200> want to install on windows 7
[08:04] <histo> Wahm200: What will you be using the VM for he was asking
[08:12] <Wahm200> testing software
[08:12] <Wahm200> running the tests
[08:12] <Wahm200> running teat sites
[08:12] <Wahm200> test
[08:14] <histo> Wahm200: You can select a bigger size and just have it dynamically allocate. So say you choose 30gig. and then you only use 3. The virtual disk file size will only be 3gb instead of 30 until the whole disk is full.
[08:15] <Wahm200> dynamically allocated ok..
[08:21] <netrunner_> It is a crime to watch porn movie in china at home,but i decided to turn the identifycation of porn movie as a part time job.Yeah it is ajoke.
[08:23] <netrunner_> I will randomly send a sos information to any channel i joined in.Hope someone help me.
[08:24] <Johnny_Linux> take it somewhere else
[08:25] <thenewone> Hi good morning
[08:26] <thenewone> how remove libre-office
[08:26] <thenewone> sudo apt-get autoremove libre-office: dont work
[08:36] <krappiste> Hi! I have a problem with the package x11-common, does someone can help?
[08:38] <histo> the8thbit: try remove not autoremove
[08:38] <histo> !ask | krappiste
[08:38] <somsip> themattbeballin: sudo apt-get remove libre-office (or purge instead of remove to remove all config files)
[08:39] <histo> the8thbit: sorry
[08:39] <krappiste> remove does not work
[08:39] <histo> krappiste: what?
[08:39] <histo> krappiste: what is your issue with x11-common?
[08:40] <krappiste> when I want to install a package, a recurrent error is when setting up the x-11 common
[08:41] <histo> !details | krappiste
[08:41] <Razzdoll> histo
[08:41] <histo> Razzdoll:
[08:41] <Razzdoll> Can you please dcc me a file. I want to test if my hexchat setting is correct?
[08:41] <histo> Razzdoll: no
[08:42] <krappiste> x11-common is broken or not fully installed
[08:42] <Razzdoll> histo: rude
[08:42] <histo> Razzdoll: I can't from here
[08:42] <Razzdoll> histo: I'm messing you arent rude at all
[08:43] <Razzdoll> histo: no problem.
[08:43] <Wahm200> hi guys..
[08:43] <Wahm200> getting error unable to mount.....Failed to retriecve share list from server??
[08:45] <Jaser> hi guys, may I ask how to add additional IP for network purposes only not internet connection
[08:45] <Jaser> network sharing purposes*
[08:46] <krappiste> histo: invoke-rc.d: initscript x11-common, action "start" failed.
[08:47] <phix> hai!  Is there any hardware benchmarking tools available?
[08:48] <Nindustries> Hi, anyone else have the issue where sometimes the search thingy doesn
[08:49] <Nindustries> doesnt work? * (pressing windows key)
[08:49] <Wahm200> anyone guys
[08:49] <Nindustries> It doesn't find anything from time to time, until I reboot
[08:49] <phix> gang? any way to benchmark CPU, RAM, Video card, HDD, etc...???
[08:49] <Wahm200> getting error unable to mount.....Failed to retriecve share list from server??
[08:49] <k1l_> !benchmark
[08:49] <k1l_> phix, see above
[08:50] <histo> krappiste: what version of ubuntu are you on?
[08:50] <histo> Wahm200: what are you trying to mount?
[08:50] <Wahm200> the drives
[08:50] <krappiste> histo: ubuntu 15.04
[08:50] <histo> Wahm200: what drives/
[08:51] <phix> ubottu, k1l_: Cheers!!
[08:51] <histo> krappiste: when are you getting that error?
[08:51] <histo> !paste | krappiste
[08:51] <Wahm200> ive installed ubuntu on virtual box.
[08:51] <Wahm200> i want to c the drives..
[08:51] <histo> Wahm200: You can't mount the c drive
[08:51] <Nindustries> Wahm200: ask in #vbox
[08:52] <histo> Wahm200: you can share directories with the guest
[08:52] <Wahm200> so how do i c the files in there
[08:52] <krappiste> I'm getting this error every time I want to install/remove/upgrade...
[08:52] <Nindustries> This is not an ubuntu issue
[08:52] <histo> Wahm200: what drives?
[08:52] <k1l_> Wahm200, what drives? the drives from the host machine?
[08:52] <Wahm200> yes
[08:52] <histo> krappiste: until you paste the full error not many people are going to be able to help
[08:52] <Nindustries> Wahm200: https://forums.virtualbox.org/viewtopic.php?f=6&t=20713
[08:52] <Nindustries> 3 seconds of googling..
[08:53] <k1l_> Wahm200, you can not mount them. you can make a folder for sharing files. but not mount the whole windows drive
[08:54] <Wahm200> ahh ok that make sense then thanks
[08:54] <Wahm200> ok
[08:54] <k1l_> Nindustries, we are here to help. telling users to go away or google is not helping them.
[08:54] <histo> Nindustries: that's not going to work for Wahm200
[08:54] <phix> k1l_: nice, it looks pretty
[08:54] <histo> Wahm200: you need to create a shared directory from outside of the guest with virtualbox.
[08:55] <Wahm200> ok looking now
[08:55] <krappiste> histo: http://paste.ubuntu.com/11516315/
[08:55] <histo> Wahm200: you will also need guest additions
[08:56] <Celphish> elo, is there a way to create a user, based on another user, regarding groups, rights etc?
[08:56] <Celphish> without adding the new user to the same groups manually...
[08:56] <histo> krappiste: what is the output of cate /etc/issue
[08:57] <histo> Celphish: just create a new user and add them to the same groups... What rights do you mena?
[08:58] <Celphish> histo: well, I was looking for a command that's in the line of : adduser USER1 cp USER2
[08:58] <krappiste> histo: cate: command not found
[08:58] <Celphish> if you know what I mean, but I guess that you can just copy the list of groups from the user you want and paste them in the command
[08:59] <phix>                                   glmark2 Score: 250
[08:59] <histo> Celphish: yeah you could just usermod after creating them to add them to the other groups
[09:00] <histo> krappiste: sorry it was supposed to be cat
[09:00] <histo> krappiste: and is this computer connected to the internet that you are working on?
[09:00] <krappiste> histo: Ubuntu 15.04 \n \l and yes
[09:01] <histo> krappiste: dpkg -l | grep policykit-1
[09:03] <histo> krappiste: nvm
[09:03] <histo> krappiste: sudo apt-get reinstall x11-common
[09:05] <krappiste> histo: http://paste.ubuntu.com/11516496/
[09:07] <Celphish> histo: thanks for the info, just found the same info :D worked like a charm, thanks!
[09:13] <krappiste> histo: an idea? :)
[09:13] <histo> krappiste: sudo apt-get install --reinstall x11-common
[09:13] <histo> krappiste: also whya re you root?
[09:15] <krappiste> histo: http://paste.ubuntu.com/11516754/ and no idea, it is a VPS
[09:16] <histo> krappiste: who's hosting it?
[09:16] <krappiste> histo: ovh
[09:16] <histo> krappiste: how are you going to use X on a VPS by the way?
[09:17] <krappiste> histo: I've just wanted to install phpmyadmin but then this error occurs
[09:21] <histo> krappiste: what else have you installed?
[09:21] <histo> krappiste: because phpmyadmin doesn't require x11-common
[09:22] <krappiste> histo: LAMP
[09:22] <bakanov_da> mojo
[09:23] <krappiste> histo: when I want to install phpmyadmin, it stops with x11-common...
[09:23] <bakanov_da> i don't want #ubuntu channel. I want #mojo. How to change it?
[09:24] <histo> bakanov_da: /join #mojo
[09:24] <bakanov_da> thanks
[09:24] <bakanov_da>  /join #mojo
[09:24] <Johnny_Linux> mornin
[09:25] <histo> krappiste: no idea what you've done. Perhaps someone else will know
[09:26] <krappiste> histo: thank you for your time, I hope someone will know ;)
[09:27] <Celphish> tmux <3
[09:35] <dionysus69> hey guys I have 15.04 ubuntu gnome, Its great except of one thing, lower system tray is annoying, is there a way to put it on top right corner next to battery wifi and sound indicators?
[09:40] <Guest38829> Hello everybody.
[09:40] <epicepic> why did i failed install smbfs on ubuntu 15 server?
[09:40] <AtuM> epicepic, perhaps you need cifs ?
[09:41] <ju5t> hello, is there an easy way to check if certain files will be changed by a future update of a package?
[09:42] <epicepic> i got this
[09:42] <epicepic> However the following packages replace it:
[09:42] <epicepic>   cifs-utils:i386 cifs-utils
[09:43] <lotuspsychje> ju5t: whats the purpose of your question?
[09:43] <Ben64> epicepic: so... install cifs-utils
[09:44] <epicepic> mounting network shared folder to my ubuntu
[09:44] <AtuM> smbfs is out, cifs is "in" ... think of it as a rename ;)
[09:44] <Roland__> Have you ever thought of creating ubuntu website and operating system a social networking platform?
[09:44] <ju5t> lotuspsychje: i had to change a file that is not a config file, it's part of the installation of a package, and i'm wondering if an update will undo my change
[09:44] <epicepic> ty
[09:45] <lotuspsychje> ju5t: wich package are we talking about
[09:45] <epicepic> i did guys ty!!!
[09:45] <ju5t> lotuspsychje: percona-xtradb-cluster-server-5.5
[09:46] <epicepic> h//192.168.199.1/cache   6227964  567808   5660156  10% /mnt
[09:46] <epicepic> how to unmount by the way
[09:46] <lotuspsychje> !info percona-xtradb-cluster-server-5.5
[09:47] <lotuspsychje> Roland__: what do you mean, making ubuntu website social network?
[09:47] <lotuspsychje> ju5t: wich ubuntu version are you on mate
[09:48] <ju5t> 14.04, but the package is not from the ubuntu repo, it's more of a general question any way, just wondered if there was an apt command that i was missing for example
[09:49] <lotuspsychje> !pinning | ju5t maybe here?
[09:50] <dionysus69> i am using gnome shell and viber icon is not visible, the app works and responds to clicks but without an icon, how can I fix this? google has nothing so far :\
[09:50] <ju5t> lotuspsychje: i'm not a huge fan of pinning, i'll see if i can find something else, thanks for the input though!
[09:51] <lotuspsychje> ju5t: i just found a #percona channel, usefull for you?
[09:51] <Roland__> lotuspsychje: something like google+ or facebook, but with better integration with ubuntu operating systems
[09:52] <ju5t> lotuspsychje: i hope so, i'll ask the same question there, thanks
[09:52] <lotuspsychje> Roland__: ubuntu has many tools for social media...not sure if i understand what you mean exactly
[09:53] <netrunner_> hello
[09:53] <netrunner_> hello there
[09:54] <x4w31> hello world :)
[09:54] <netrunner_> hi
[09:54] <lotuspsychje> ju5t: i think it depends wich file you edited matters for an update..config files mostly stay intact
[09:54] <Roland__> lotuspsychje: for example, ubuntu website could have a proper WebChat client etc
[09:54] <lotuspsychje> netrunner_: please dont flood
[09:54] <netrunner_> how are you today
[09:54] <lotuspsychje> Roland__: #ubuntu has a webcchat
[09:55] <Roland__> IRC doesn't work well with mobile data connection
[09:55] <netrunner_> flood?
[09:55] <Roland__> lotuspsychje: IRC doesn't work well with mobile data connection
[09:56] <lotuspsychje> Roland__: here's a webchat to connect to here: https://webchat.freenode.net/
[09:56] <Roland__> lotuspsychje: that doesn't work nicely with a mobile internet connection
[09:58] <t3> hello
[09:59] <netrunner_> hello
[10:00] <netrunner_> halo
[10:00] <netrunner_> alo ha
[10:01] <jellow> !hi | netrunner_
[10:01] <netrunner_> are you real people?
[10:01] <jpds> netrunner_: Possibly just really good AI.
[10:02] <netrunner_> plz show me your code then.
[10:02] <netrunner_> what's your code?what do you live for?
[10:03] <jellow> !life | netrunner_
[10:04] <Roland__> netrunner_: my code is always evolving, never in a fixed state
[10:04] <netrunner_> he said he's AI
[10:04] <netrunner_> fixed state?
[10:05] <netrunner_> you mean my country?
[10:06] <onorua> Guys, for ubuntu 15.04, what is the file name should looks like to load networking configuration in /etc/network/interfaces.d/ ?
[10:06] <lotuspsychje> !ot | netrunner_
[10:06] <netrunner_> i am randomly sending my help message to any joined channel,hope someone could see.
[10:06] <netrunner_> is that annoying?
[10:07] <lotuspsychje> netrunner_: thats not the purpose of this channel, please stop that
[10:07] <lotuspsychje> netrunner_: only ubuntu support
[10:08] <netrunner_> ta
[10:08] <lotuspsychje> onorua: what are you trying to do exactly mate
[10:10] <onorua> lotuspsychje: I want to configure static IP on my ubuntu server, I don't want to use /etc/network/interfaces main file, because I can't update it with ansible playbook, but if I could do it with /etc/network/interafces.d/eth0.conf for instance that would be prefect
[10:12] <lotuspsychje> onorua: could this help you? https://help.ubuntu.com/lts/serverguide/network-configuration.html
[10:12] <netrunner_> is that normal that my router been hacked by changing the SSID
[10:13] <lotuspsychje> netrunner_: this might be a question for ##networking
[10:18] <lotuspsychje> onorua: or maybe the #ubuntu-server guys might know static ip on 15.04?
[10:24] <onorua> lotuspsychje: I think I've found the issue, thank you! I had to add source /etc/network/interfaces.d/* to /etn/network/interfaces file
[10:25] <lotuspsychje> !yay | onorua
[10:29] <madangel> I am not able to configure my smtp.Whenever I try to send a patchI am getting the following error:
[10:30] <madangel> Send this email? ([y]es|[n]o|[q]uit|[a]ll):  Unable to initialize SMTP properly. Check config and use --smtp-debug. VALUES: server=smtp.gmail.com encryption=tls hello=localhost.localdomain port=587 at /usr/lib/git-core/git-send-email line 1110.
[10:30] <lotuspsychje> !smtp | madangel
[10:30] <madangel> I have installed git send-email
[10:32] <madangel> ubottu: I am trying to send using git send-email
[10:33] <mcphail> madangel: Just a hunch - If you've configures everything correctly on your Ubuntu machine, you may need to change setting on your gmail account (something like "use less secure methods", IIRC).
[10:34] <madangel> mcphail: ok I will try that
[10:55] <madangel> mcphail: How to do that?
[10:55] <android_studio> Trying to install lib32stdc++6 on 14.04. Getting error: "The following packages have unmet dependencies:  lib32stdc++6 : Depends: gcc-4.8-base (= 4.8.2-19ubuntu1) but 4.8.4-2ubuntu1~14.04 is to be installed". How to fix this?
[10:58] <llutz> android_studio: where did you install your gcc-4.8-base from? thats not the version from repos
[10:59] <cromag> !paste
[11:01] <android_studio> llutz: I didn't install anything. I was trying to set-up Android Studio via a PPA and when I was startng and setting it up I got this error which is blocking.
[11:01] <llutz> !ppa | android_studio
[11:02] <android_studio> llutz: ppa:paolorotolo/android-studio is that PPA.
[11:02] <llutz> android_studio: so you installed a newer gcc version from that ppa, which breaks other parts of your system.
[11:03] <llutz> android_studio: either try to downgrade to the repo-version of gcc-4.8-base or try to get a newer version of lib32stdc..
[11:03] <android_studio> llutz: I am not sure which version it installed. It bascially installed a lot of stuff and I thouhgt it would work after that but it didn't. So I am kind of stuck. On OSX and Windows I just used to install one package.
[11:04] <TheNumb> android_studio: why would you use a ppa?
[11:04] <TheNumb> ubuntu-make can install android-studio for you
[11:04] <llutz> android_studio: see your pasted error, there is the version shown
[11:04] <android_studio> llutz: Because installing from Google downloaded tar was giving a lot of troubles.
[11:04] <llutz> android_studio: or "apt-cache policy gcc-4.8-base"
[11:04] <adsc> how can I tell tar to exclude myfile, but not folder1/myfile?
[11:05] <Octaviano> hi there , i would like to install  THE x-plane 10 in ubuntu 14.04 lts 64bit , anyone can help me?
[11:06] <TheNumb> Octaviano: what issues are you having?
[11:07] <android_studio> llutz: http://pasted.co/40ba9724 is what I am getting
[11:08] <llutz> android_studio: sure, that shows you the version actually installed and, at the bottom, the official repo-version
[11:11] <android_studio> llutz: installed and candidate both are same. In version talbe, whatever is mentioned wasn't found when I try? Should I just change "4.8" part to "4.8.2-19"?
[11:11] <histo> !ppapurge | android_studio
[11:12] <llutz> android_studio: sudo apt-get install gcc-4.8-base=4.8.2-19ubuntu1
[11:12] <TheNumb> Octaviano: I'm not your personal tech support. If you're going to ask questions, do so here.
[11:13] <TheNumb> not in private
[11:13] <android_studio> llutz: Oh :(. I will be back on square one then. I was trying to setup Android Studio w/o PPA and it wasn't working.
[11:13] <TheNumb> android_studio: install ubuntu-make
[11:13] <TheNumb> it works
[11:13] <TheNumb> It'll install android studio for you
[11:13] <TheNumb> https://wiki.ubuntu.com/ubuntu-make
[11:13] <TheNumb> android_studio: ^
[11:14] <llutz> android_studio: this ppa "doesn't work" too, because it breaks other parts of your system. as you've seen
[11:14] <android_studio> TheNumb: That's the one way remaing to try. I am going to try installing package llutz suggested and see if it works. Then Ubuntu-Make and then if it still doesn't work I will just throw my laptop in IT bay and ask them to set it up or give me a Mac or PC/Win
[11:15] <android_studio> llutz: I think so.
[11:17] <histo> android_studio: yeah because windows or mac would solve your issues of borking the entire system.
[11:17] <drmagoo> hi, I have an issue with my nvidia GTX960 graphicscard. I'm running a dual-head setup and when the computer "wakes up" all the applications that were on the right monitor are "hidden" somewhere in the background. And it takes some job to get them back to the foreground. I'm currently  using nvidias "own" drivers, since the standard repo driver doesnt support that card. But has anyone experienced this problem and found a solution for it ?
[11:17] <histo> android_studio: you just followed some really bad advice using that ppa
[11:19] <android_studio> histo: I was on that. See, there is no point of getting into what is good or bad. But the thing is I am not used to Linux and on Windows and OSX I never faced these dependency issues. One .exe/.dmg - install - peace. Things have their aspects. Here I have to work on Linux so I am trying my best
[11:20] <android_studio> llutz: TheNumb I am purging that PPA. Hope every installed package was removed. I will try to go the ubuntu-make way. Hope that works :)
[11:20] <TheNumb> it should
[11:22] <android_studio> TheNumb: I just chekced and autoremove andorid-studio was able to find ~40MB remaining and removing. Maybe I will try clean and --purge and autoclean
[11:22] <TheNumb> do as you please
[11:26] <incik> hi
[11:32] <histo> android_studio: Can I send you a file to run?
[11:33] <android_studio> android_studio: What file? Some script?
[11:33] <histo> android_studio: When you add a ppa and install software from there, it's not validated by anyone.  Anyone could have made it etc.. that's why they are unsupported here.
[11:34] <histo> android_studio: I'm joking about the file I'm just trying to explain so you'd understand.
[11:34] <android_studio> histo: Yes, I understoof that part. I have removed it. Purged the packages. Installed via Ubuntu-Make. But even that too is a ppa "ubuntu-desktop". Not sure if it's official PPA.
[11:35] <android_studio> histo: Yeah. Got it. No problem.
[11:35] <prosodyContext> Does "WARNING: The following packages cannot be authenticated!  libdb4.8++ bitcoin-qt Install these packages without verification? [y/N]
[11:35] <prosodyContext> E: Some packages could not be authenticated ....  BECAUSE  gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported
[11:35] <prosodyContext> gpg: no ultimately trusted keys found
[11:35] <prosodyContext> gpg: Total number processed: 1
[11:35] <prosodyContext> gpg:               imported: 1  (RSA: 1)
[11:35] <prosodyContext> OK ..... the no "utlimate" trust means "not authenticated" ... or my end problem?
[11:37] <Haris> hello all
[11:37] <Haris> I have curl installed on trusty, but curl_init() is not present ? what pacakge do I need ?
[11:39] <llutz> Haris: curl_init()  is a php command? then try installing php5-curl
[11:39] <boodllebat> can anybody tell me flag for pthread library ?
[11:39] <Haris> yep
[11:39] <Haris> got it. done it. all ok. thankyou all
[11:40] <lyndel> hey guys i seem to be having a boot issuse after a user told me about configureing pylmouth to get the ubuntu splash screen it never worke and now when ever i boot up the labtop it gets stuck before login screen like it stays on blank screen and if i press f1 or any other number its sayimg its waiting for pylmouth to quit but it never does
[11:40] <Apteryx> hello. Anyone would know how to reliably disable the nouveau driver in ubuntu 14.04 ? I tried all the web provided but without success.
[11:41] <lyndel> so it boots and stays forever on blank screen and am forced to rebooot many times just for it to get to login screen correcty
[11:41] <Apteryx> blacklisting is of no use, even after rebuilding the ramfs using update-initramfs -u
[11:43] <histo> Apteryx: blacklisting will stop it from loading
[11:43] <histo> lyndel: what did you change with plymouth?
[11:43] <Apteryx> histo: but somehow it still loads
[11:43] <histo> Apteryx: How are you blacklisting it?
[11:44] <histo> !blacklist | Apteryx
[11:44] <lyndel> i dont know a user gave me these commands to use pt-get install --reinstall plymouth-theme-ubuntu-logo
[11:44] <lyndel>    22  sudo apt-get install --reinstall plymouth-theme-ubuntu-logo
[11:44] <lyndel>    23  sudo dpkg-reconfigure plymouth
[11:44] <lyndel>    24  sudo update-initramfs -u -k all
[11:45] <lyndel> thats all
[11:45] <Apteryx> histo: the nividia installer blacklists it in /etc/modprobe.d/
[11:46] <Apteryx> histo: blacklist nouveau, and a bunch of other old drivers that are supposedly problematic too.
[11:47] <histo> Apteryx: grep 'blacklist nouveau' /etc/modprobe.d/*
[11:48] <Apteryx> ubottu: thanks for the information I will paly with the modules files to try to tweak the order
[11:49] <lyndel> histo u dont unstand the commands?
[11:49] <Apteryx> histo: ok, give me a second, I had uninstalled nvidia drivers I will reinstall from now.
[11:50] <histo> lyndel: they shouldn't have borked anything
[11:50] <histo> lyndel: what type of video card is in this system?
[11:51] <lyndel> ATI i just wanted boot splash to show now i have this broblem
[11:51] <histo> lyndel: you'd have to take a look at your syslog when it fails and see what's hanging
[11:52] <lyndel> histo,  HOW DO I DO THAT?
[11:52] <lyndel> histo,  sorry caps
[11:53] <lyndel> histo, how will i find this log?
[11:53] <histo> lyndel: /var/log/syslog
[11:53] <hateball> lyndel: ctrl+alf+f1 to get to a tty, log in, "journalctl" to display log info. that's one way
[11:54] <histo> lyndel: journalctl is a better way
[11:54] <lyndel> histo journalctl is like username?
[11:54] <histo> lyndel: it's a command
[11:54] <lyndel> oh ok
[11:54] <lyndel> wait
[11:56] <lyndel> histo,  how do i use it? what am i looking for? it dont unstand what all the text mean
[11:59] <lyndel> hello
[12:00] <eggbeater> hello
[12:00] <histo> lyndel: look for the time that it hung last and find errors or where it hung
[12:02] <lyndel> histo?
[12:03] <lyndel> histo i dont understand how or what am looking for there is so much information its confusing
[12:03] <Apteryx> histo: here's what the nividia install blacklists (nouveau and a bunch of others): http://pastebin.com/g2ygZH63
[12:04] <Apteryx> Even with this, and updating the initramfs, ubuntu will still load nouveau which prevents nvidia from running
[12:05] <lyndel> histo cant i just send the log for u?
[12:06] <Apteryx> Is there a way to check that the initrd really does not have nouveau anymore?
[12:06] <histo> lyndel: when did the system last hang?
[12:07] <histo> Apteryx: yeah check if nouveau is loaded with lsmod | grep nouveau
[12:07] <lyndel> today it hang too times on black screen after the third reset it booted to login screen
[12:08] <A_I_> hi there
[12:08] <lyndel> histo if i send u the log u can look at it and tell me the problem
[12:08] <A_I_> catfish : I can select multiple files, but I cannot drag and drop them, drag and drop takes only one file on the multiple selected
[12:08] <A_I_> any idea ?
[12:09] <A_I_> I've seen this bug but it does not answer my question https://bugs.launchpad.net/catfish-search/+bug/1283726
[12:09] <histo> lyndel: journalctl --no-pager | nc termbin.com 9999
[12:09] <lyndel> ok
[12:10] <lyndel> histo http://termbin.com/oq2n
[12:11] <histo> lyndel: did it hang on the last boot?
[12:13] <lyndel> histo it hang too times on the third time it booted correctly
[12:13] <camoufl4g3> how i can install skype on ubuntu ?
[12:13] <SaucisseCocktail> $!KODI!$
[12:13] <lyndel> camoufl4g3, did u tryed the ubuntu software center?
[12:14] <camoufl4g3> no
[12:14] <lyndel> camoufl4g3, it should be there or try skype web site there download page
[12:14] <k1l_> !skype | camoufl4g3
[12:14] <camoufl4g3> thanks everybody
[12:14] <lyndel> :)
[12:15] <SaucisseCocktail> hey who can tell me why my Xchat does not connect automatically to any of my server? I checked autoconnect in the servers list !
[12:16] <Celphish> can someone explain what the -f-flag does for tar? I don't understand the entry in the manual
[12:16] <lyndel> SaucisseCocktail, am guessing a file got corrupted some how u may need to remove and reinstall but am not sure someone else might have a better answer
[12:17] <histo> lyndel: I'm looking at itnow
[12:17] <k1l_> SaucisseCocktail: is there a error in the xchat server window?
[12:17] <Decoy_Platypus> Celphish: tells tar that you are giving a filename now
[12:17] <lyndel> histo anything bad about it?
[12:18] <SaucisseCocktail> lyndel, thanks a lot for your response! In fact I already tried to remove Xchat (and delete the .Xchat2 directory in my home folder) with no change...
[12:18] <Decoy_Platypus> Celphish: for example if you run: tar -tf my_archive.tar   then tar knows you want to test (-t) my_archive.tar (-f my_archive.tar)
[12:18] <histo> lyndel: that log contains only one boot
[12:19] <Celphish> Decoy_Platypus: oh ok, but if I don't use the -f-flag it doesn't know what to do? or does it anyway?
[12:19] <lyndel> SaucisseCocktail,  ur welcome but that is strenge some how its not working as itshould not able to help with that one sorry
[12:19] <A_I_> I've submitted a bug https://bugs.launchpad.net/catfish-search/+bug/1461072
[12:19] <lyndel> histo
[12:19] <histo> Celphish: file
[12:19] <lyndel> histo u told me to look at the log it should of had all the boots for today what next then?
[12:19] <SaucisseCocktail> k1l_, it tells me, unknown host, did you missed a key or something like this... That is so strange because when i open the server windows, I can click "connect", and everything works fine !
[12:19] <Decoy_Platypus> Celphish: if you dont specify -f and a filename for either creating or extracting or testing, i believe tar expects input from stdin or output goes to stdout
[12:20] <histo> Celphish: it's right in the man page
[12:20] <k1l_> SaucisseCocktail: so is the network up and running when you want to connect with xchat?
[12:20] <Celphish> histo: yes, ofc, but I didn't understand the man-page regarding that flag
[12:21] <histo> Celphish: you can press /   while reading man and search forwards. after pressing /  you can type -f    and press enter it will then highlight all occurances of -f if you press n you will go to the next occurance
[12:21] <histo> Celphish:   -f, --file=ARCHIVE  <<<
[12:21] <Celphish> histo: that was epic, thank you :)
[12:22] <Celphish> anywho, a simple sudo tar -xvf should be enough for my .tar-file
[12:22] <BluesKaj> Hey all
[12:22] <SaucisseCocktail> k1l_, yes network is ok. the message is Unkown host, have you made a typing mistake?
[12:22] <Decoy_Platypus> Celphish: if you must run tar as sudo
[12:22] <k1l_> SaucisseCocktail: so did you?
[12:23] <histo> Celphish: are you extracting a file?
[12:23] <lyndel> histo?
[12:23] <Decoy_Platypus> Celphish: if you are just throwing files around in your home directory I would just skip that part
[12:23] <histo> lyndel: ?
[12:23] <Celphish> Decoy_Platypus: it's not in my home-folder, it's in another users folder
[12:23] <Celphish> histo: yes..
[12:23] <lyndel> histo what should i do?
[12:23] <SaucisseCocktail> I don't think so, In fact I don't really understand what the terminal is talking me about ! It doesn't try to connect ! (I'm using Mate Ubuntu 14.04)
[12:24] <Celphish> I also learned that it automatically creates a folder in which it puts the files :)
[12:24] <histo> Celphish: is it tar'd and gzip'd or just tar'd
[12:24] <k1l_> SaucisseCocktail: you dont know if the server adress is right you set to autoconnect?
[12:24] <histo> lyndel: dunno there's only one boot in that log from what I see.
[12:25] <Celphish> histo: just tar'd, if it was tar.gz I had to add the z-flag.. unless we have a newer version of tar.. if I'm not mistaken
[12:25] <histo> lyndel: Was the previous boot unsuccessfull?
[12:25] <histo> Celphish: you got it
[12:25] <Celphish> :D
[12:25] <histo> Celphish: no need for sudo for tar though unless you are untaring somewhere you don'thave permission to
[12:25] <lyndel> histo u dont think its a plymouth error? becouse it only happened after i used that command and its waiting for it to quit but it never does
[12:25] <SaucisseCocktail> I set autoconnect, It doesn't connect at the moment I start the program. But, when I open the servers dialog box, I select freenode (for exemple), and it connects right without any problem !
[12:25] <histo> lyndel: there's no way to tell with what you provided.
[12:26] <Celphish> histo: true, but I don't think I have permission in that persons home-folder, I thought it was just simpler to sudo it :)
[12:26] <lyndel> histo it hang too times the third time it booted so i got on xchat to fix it
[12:27] <android_studio> How to force shutdown Ubuntu (ElementaryOS actually) when I am stuck on (or before) its login screen? (I mapped Power Button to hibernate and I can't see the login screen. I boot and come back to that login screen where I first reached after logging off because Applications menu was frozen)
[12:27] <TheNumb> android_studio: elementary is not supported here.
[12:27] <histo> lyndel: journalctl -b -1 --no-pager | nc termbin.com 9999
[12:27] <Decoy_Platypus> Celphish: histo I don't see it often, but I use the -a flag all the time: tar xaf somefile.tar.gz, a tells tar to automatically extract (or create with c) the file, as long as it has a proper extension
[12:27] <lyndel> ok
[12:27] <cfhowlett> android_studio, elementary OS is not supported here.  sorry
[12:28] <lyndel> histo got error journalctl -b -1 --no-pager | nc termbin.com 9999
[12:28] <lyndel> Failed to look up boot -1: Cannot assign requested address
[12:28] <lyndel> Use netcat.
[12:28] <capprentice> How do I implement traffic shaping in Ubuntu Server 12.04 running as a SeedBOX for this ip pool: 150.51.1.0/24 ? I want to limit the download speed for this IP pool to 800KB/s
[12:28] <histo> lyndel: yeah there are no previous boot's logged
[12:28] <cfhowlett> !elementary | android_studio
[12:28] <capprentice> Should I ask this question to some where else? How do I implement traffic shaping in Ubuntu Server 12.04 running as a SeedBOX for this ip pool: 150.51.1.0/24 ? I want to limit the download speed for this IP pool to 800KB/s\
[12:29] <TheNumb> !patience | capprentice
[12:29] <android_studio> TheNumb: Yes, that's right. Elementary chennel is ghost town actually. What if I ask "how to force shutdown Ubuntu if my power button is mapped to hibernate"? cfhowlett
[12:29] <lyndel> histo it hs to be related to pylmouth only after i reinstalled did i get these problems
[12:29] <histo> lyndel: okay
[12:29] <k1l_> SaucisseCocktail: well, autoconnect works. so there must be something on your system or on your settings that is bwrong
[12:29] <Celphish> histo: seems like you're a busy person in here, I'll just throw one more question your way. If I want to move all the files in a folder, let's say FolderA/FolderB/* to FolderA, shouldn't sudo mv FolderA/FolderB/* FolderA/ work? And yes I need sudo ;)
[12:29] <Decoy_Platypus> android_studio: you can run: sudo poweroff in a terminal
[12:29] <k1l_> android_studio: if support is important for you, i would change the distro then :/
[12:30] <SaucisseCocktail> IS Xchat using a library like tcl or something?
[12:30] <cfhowlett> android_studio, sorry but as we have ZERO idea what/how the elementary have modded ubuntu, you need to get support elementary OS
[12:30] <android_studio> Decoy_Platypus: I cannot. I am stuck at what seems to be "pre login screen".
[12:30] <histo> lyndel: you can try booting in text mode to see what's going on.
[12:30] <k1l_> SaucisseCocktail: ok, so start what is different from your system than the standard ubuntu install? proxies? etc
[12:30] <Apteryx> Seems like the problem is really with DRM loading nouveau from the initrd
[12:30] <lyndel> histo what commands should i use? the reinstall must of broken it somehow
[12:31] <Apteryx> How can I make sure nouveau is not loaded right after grub?
[12:31] <android_studio> k1l_: that's not my call really. but yeah I am going to be switching to LTS pure Ubuntu or maybe some OS that are for mere mortals.
[12:31] <lyndel> hissto how to do that?
[12:31] <histo> lyndel: edit your /etc/default/grub and remove 'splash' from the boot line and put 'text' there.  Save the file and sudo update-grub and reboot.
[12:31] <capprentice> Erm...
[12:31] <lyndel> ok
[12:32] <SaucisseCocktail> k1l_, nothing special. Except that my Xchat is running on a virtual X2go session !
[12:32] <histo> lyndel: wait
[12:32] <lyndel> ok
[12:32] <histo> lyndel: I think that will boot to console
[12:32] <android_studio> cfhowlett: How it's done in Ubunut? Is there any key-combo to force shutdown ubuntu from login screen other than power button? I will try my luck with that shortcut?
[12:32] <capprentice> How do I implement traffic shaping in Ubuntu Server 12.04 running as a SeedBOX for this ip pool: 150.51.1.0/24 ? I want to limit the download speed for this IP pool to 800KB/s
[12:32] <lyndel> thats not what i wannt
[12:32] <histo> lyndel: if you press the escape key during the splash screen it should show you the text
[12:32] <lyndel> histo that never works
[12:32] <Decoy_Platypus> capprentice: seriously?
[12:33] <k1l_> SaucisseCocktail: that makes a huge difference
[12:33] <capprentice> Why? Is it odd to you? Decoy_Platypus
[12:33] <lyndel> am using ubuntu 15.04 esc never works on boot
[12:33] <mcphail> Apteryx: have you installed the nvidia driver from somewhere other than the Ubuntu repositories?
[12:33] <k1l_> SaucisseCocktail: so its not a regular xchat running on ubuntu
[12:33] <TheNumb> android_studio: elementary devs make various changes to the ubuntu base. You can't be sure what they changed.
[12:33] <android_studio> capprentice: Dude, that's really not gonna help. Nobody knows your answer here. Go to askubuntu or wait, or just Google.
[12:33] <Decoy_Platypus> capprentice: I have your question on my screen 3 times all at once
[12:33] <lyndel> histo it seems disabled or something
[12:34] <Decoy_Platypus> capprentice: Spamming the channel doesn't make anyone want to help you out
[12:34] <SaucisseCocktail> k1l_, yes maybe, but I recently format my system ,and before I was using Xchat under Xubuntu, and the autoconnect worked fine ! Thanks for your help , I'll try to find another solution
[12:34] <TheNumb> capprentice: read up on traffic control (tc)
[12:34] <android_studio> TheNumb: Thanks. But let's say that's happpening in Ubunut. I mean I am out of options anyway and before wiping everything out  want to try this.
[12:35] <histo> lyndel: http://askubuntu.com/questions/271420/grub2-removed-quiet-splash-options-are-ignored
[12:35] <lyndel> ok
[12:35] <TheNumb> android_studio: you'd switch to a virtual terminal and type in poweroff
[12:35] <ikonia> android_studio: you're not using ubuntu
[12:35] <ikonia> android_studio: please take it to the correct channel
[12:35] <capprentice> Decoy_Platypus: My screen is smaller than you.. Sorry.
[12:36] <TheNumb> capprentice: then use iptables to filter the appriopriate subnet
[12:37] <Decoy_Platypus> capprentice: no harm done
[12:37] <cfhowlett> SaucisseCocktail, xchat is abandonware.  consider hexchat
[12:38] <android_studio> ikonia: Thank you.
[12:38] <ikonia> thanks android_studio
[12:39] <pietro> sham
[12:41] <Apteryx> I've extracted the initrd file and trying to see if nouveau will still be loaded. Any hint would be appreciated :)
[12:43] <TheNumb> Apteryx: it won't be loaded if you blacklist it.
[12:44] <Apteryx> TheNumb: Ok. I see the initrd also has the blacklist definitions
[12:44] <Apteryx> in etc/modprobe.d
[12:45] <Anonon> Hi everyone
[12:45] <TheNumb> it should
[12:45] <Apteryx> So it should work. But somehow nouveau was being load very early, I think for the framebuffer, before the blacklist defs are being parsed
[12:45] <TheNumb> Anonon: hello not so anonymous Anon.
[12:45] <Apteryx> would putting rdblacklist=nouveau in the /etc/default/grub file be useful?
[12:46] <mcphail> Apteryx: if you boot with nomodeset, nouveau won't be able to be loaded
[12:46] <Anonon> I'm currently launching ubuntu server on VPS, I'd like to test its uploading speed with iperf to public network with iperf. Can anyone help me with that tool?
[12:46] <TheNumb> Anonon: did you search for tutorials?
[12:46] <Anonon> I've found some examples but I'm really bad in networks
[12:46] <Apteryx> mcphail: like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" in the grub2 file?
[12:47] <mcphail> Apteryx: yes, and update-grub
[12:49] <Anonon> TheNumb: I mean I don't see the way how can I test only upload speed
[12:49] <Apteryx> mcphail: thanks. Will reboot and see now :)
[12:49] <Anonon> it outputs just a bandwidth size
[12:52] <capprentice> How ISPs limit bandwidth? I mean what device they use to limit bandwidth? My upstream ISP gets 800MB/s bandwidth from their upstream ISP. How they limit bandwidth at 800 MB/s? I dont think they use Mikrotik CCR router to impose the limit!?
[12:52] <capprentice> What do they use?
[12:52] <capprentice> Yekkkk
[12:52] <capprentice> Wrong channel.
[12:52] <lotuspsychje> capprentice: a question for ##networking perhaps?
[12:52] <capprentice> Sorry.
[12:53] <Apteryx> mcphail: nouveau still being loaded :s
[12:53] <Apteryx> even after adding nomodeset to my /etc/default/grub file
[12:53] <TheNumb> impossible
[12:54] <lotuspsychje> !nomodeset | Apteryx
[12:54] <mcphail> Apteryx: If it is loaded, it won't be getting used. Nouveau can't run without kms. You must be using nvidia or vesa drivers
[12:55] <Apteryx> mcphail: I am trying to use nvidia drivers indeed. But nvidia fails to load as it says another driver such as nouveau is loaded already
[12:55] <Apteryx> mcphail: lsmod | grep nouveau confirms nouveau is still being loaded
[12:55] <mcphail> Apteryx: then you must be using vesa, not nouveau, if you are seeing a gui
[12:56] <Apteryx> mcphail: the only gui I see is the lighdm greeter
[12:56] <Apteryx> lightdm*
[12:56] <ppf> after running some time, pulseaudio always crashes with Assertion '!s->thread_info.rewind_requested' failed
[12:56] <Apteryx> and the splash screen before
[12:56] <lotuspsychje> !sound | ppf
[12:57] <Apteryx> so yes, nouveau still being used. maybe I have to remove "splash" from the grub ? seems this would use nouveau
[12:57] <ppf> preferably when i open a video in the browser
[12:57] <ppf> freedesktop has a 3 year old, unfixed bug report with that symptom, but i'm wondering if there is a known workaround
[12:57] <Apteryx> and what about the kernel rdblacklist=nouveau parameter that non ubuntu people seems to use (fedora for example) ?
[12:57] <mcphail> Apteryx: as I said, if you have disabled kernel modesetting nouveau will fail IIRC. If you have a picture, it is from vesa or nividia
[12:58] <ppf> lotuspsychje: i'm afraid those aren't helpful in my case
[12:58] <Apteryx> and the way to disable kernel modesetting is to use "nomodeset" ? only this?
[12:59] <ioria> Apteryx, you can check with   lshw -c video
[12:59] <lotuspsychje> ppf: you have ubuntu-restricted-extras installed?
[12:59] <vhf> Hi all, on a fresh ubuntu 14.04 install `top` only shows current user's jobs, but I'd like, without sudoing it, for `top` to show all running jobs
[13:00] <ppf> lotuspsychje: no
[13:00] <Apteryx> ioria: configuration: driver=nouveau
[13:00] <lotuspsychje> ppf: try install, maybe it will fix?
[13:00] <ppf> isn't that a codec pack?
[13:01] <lotuspsychje> Apteryx: you sure you sudo update-grub after editing grub
[13:01] <ioria> Apteryx, you can purge it, but it's not recommended
[13:01] <lotuspsychje> ppf: yes, but worth a try
[13:01] <lotuspsychje> ppf: as you say it happens when playing video
[13:02] <ppf> but not because of a missing video codec. restarting PA and restarting the video does play the video (most of the time)
[13:02] <ppf> (and also with working sound)
[13:02] <lotuspsychje> ppf: vlc got this issue too?
[13:02] <solo1> hi i got a problem server ubuntu raid  ( 2 hd in raid 1 ) during partition disk ( only the raid with a #126 ) cannot complete the install grub failure ... need help please
[13:02] <lotuspsychje> !raid | solo1
[13:03] <solo1> !raid
[13:03] <ppf> haven't checked. this problem is also not reliably reproducable
[13:03] <lotuspsychje> ppf: weird
[13:03] <vhf> an idea for my `top` problem?
[13:03] <vhf> permissions, groups? anything?
[13:03] <lotuspsychje> !info htop | vhf try this?
[13:03] <vhf> same problem lotuspsychje
[13:04] <vhf> only shows current user's jobs lotuspsychje
[13:04] <solo2> !raid
[13:04] <ppf> this is the freedesktop bugreport https://bugs.freedesktop.org/show_bug.cgi?id=54881
[13:04] <ppf> symptom is the same, but everything else isn't
[13:05] <lotuspsychje> ppf: did you try starting browser from terminal for errors?
[13:05] <ppf> (i.e. PA 6.0 on ubuntu vivid, pavucontrol is not involved, the error appears randomly and my default output is using the combined-sink module)
[13:05] <lotuspsychje> vhf: i think you can only see what happens in current user
[13:06] <lotuspsychje> vhf: if you want rights from a user to admin user, you need tools like sux
[13:06] <ppf> i did that some time ago, i don't have the exact error message anymore, but it was something in the vicinity of "stream died"
[13:07] <solo2> i 've already read it , i m stucked with the grub during partition ( not in a VMHD ... but in a real server ) ... raid 1 ( 2 hd ) it can only see the raid with the name i gave raid1#126 ( #126 i ve no idea why it put # 126 ), and i can only set ( manually ) the partion on it ... at the end grub failure ... asking help
[13:07] <lotuspsychje> ppf: well you can already try few: restricted-extras, try different browsers, different kind of stream/video's
[13:08] <ppf> here's the full message: E: [alsa-sink-HDMI 0] sink.c: Assertion '!s->thread_info.rewind_requested' failed at pulsecore/sink.c:1323, function pa_sink_render_into_full(). Aborting.
[13:08] <ppf> (interestingly, the failning sink is [alsa-sing-HDMI 0] and _not_ [combined])
[13:09] <lotuspsychje> ppf: did you try a pulseaudio restart?
[13:09] <ppf> well, sure, that brings it back up
[13:09] <ppf> but it will crash again after minutes or hours
[13:09] <lotuspsychje> ppf: what about creating another user, and try the same video's
[13:10] <ppf> the error is not related to a specific video (or set of videos)
[13:11] <lotuspsychje> ppf: yeah but its related to online video playing right
[13:11] <lotuspsychje> ppf: try on chromium-browser?
[13:11] <ppf> no i don't think it's related
[13:12] <ppf> the high correlation is probably because that's where most of my audio is coming from
[13:14] <SaucisseCocktail> Hey, I've just solved my issue, by installing xchat-gnome, and customize it... thanks a lot
[13:15] <lotuspsychje> !yay | SaucisseCocktail
[13:16] <vhf> nah lotuspsychje, top is supposed to show all jobs by default, unless the kernel is compiled with grsecurity patch, and mine is not
[13:17] <vhf> not only current user jobs
[13:17] <ali__> bnc
[13:18] <ali__> servermesra.dal.net:7000
[13:19] <Pici> vhf: if you can change the options while running it to do that, you can write out a config file (press W) for your user so that you will get those by default next time you run it.
[13:20] <vhf> Pici: thanks, but my problem lies in the fact that (h)top does not want to show me all users jobs
[13:20] <vhf> and there are no (h)top otpion to do that
[13:21] <vhf> and this only occurs on one of my server
[13:30] <ishtiaque> hi guys
[13:30] <ishtiaque> I'm on ubuntu 15.04 with linux kernel 3.19.0-15-generic
[13:31] <ishtiaque> i recently updated from 14.10 after this latest version was released
[13:32] <tocka> got to know man!
[13:32] <tocka> congrats :D
[13:32] <ishtiaque> so the issue now is that my touchpad was recognised and two-finger and edge scrolls works perfectly fine on ubuntu 14.10 (linux kernel 3.16.0-28) but on this version it doesn't work
[13:40] <VlanX> hello.... I have a mount string in /etc/fstab to mount a remote partition via NFSm but sometimes, at the boot, id doesnt feel like mounting it
[13:41] <lotuspsychje> !mount | VlanX
[13:41] <lotuspsychje> !nfs | VlanX
[13:42] <ubuntu_user> Good morning all from Las Vegas!
[13:42] <ubuntu_user> I just upgraded to 15.04 and need some help with a few things.
[13:42] <ubuntu_user> I used to have 3 boxes on top of windows "max" "min" and exit, now I have just exit, how can I fix this?
[13:42] <ubuntu_user> the windows look different too
[13:43] <ubuntu_user> xchat also crashes almost on startup too
[13:43] <raihanteknologi> halo
[13:44] <ubuntu_user> anyone even understand what I am saying?
[13:44] <ikonia> you're saying the minimise and maximise buttons are gone from your theme
[13:44] <TheNumb> ubuntu_user: ubuntu gnome?
[13:45] <ubuntu_user> well standard ubuntu with metacity installed
[13:45] <TheNumb> probably the settings got reset
[13:45] <ubuntu_user> I might try the new ubuntu gnome as the last time it seemed too no
[13:45] <ubuntu_user> how do I fix that the min max to be back or how do I change themes?
[13:48] <ubuntu_user> any idea how I can get the windows to go back to normal?
[13:48] <ubuntu_user> to have all 3 buttons again?
[13:48] <TheNumb> You'd have to mess with metacity's settings I guess.
[13:48] <ubuntu_user> how do I do that?
[13:49] <TheNumb> ubuntu_user: dconf-editor should get you started
[13:49] <TheNumb> There should be a key called metacity
[13:49] <ubuntu_user> fired it up no menu for metacity in there
[13:50] <TheNumb> ubuntu_user: apps->metacity
[13:50] <ubuntu_user> no such metacity menu under apps
[13:51] <TheNumb> ubuntu_user: in dconf-editor?
[13:51] <ubuntu_user> yes in dconf-editor
[13:51] <TheNumb> ,_,
[13:51] <weber> ?
[13:51] <ubuntu_user> any other ideas?
[13:52] <TheNumb> ubuntu_user: let me fire up the vm
[13:52] <thenewone> Hi guys
[13:52] <thenewone> how remove libre-office ?
[13:52] <ubuntu_user> so there is no way to get my buttons back?
[13:52] <thenewone> sudo apt-get autoremove libre-office dont work
[13:52] <TheNumb> thenewone: open software center and uninstall it.
[13:52] <TheNumb> ubuntu_user: I'm pretty sure there is.
[13:52] <TheNumb> Let me test it.
[13:53] <ubuntu_user> test what?
[13:53] <TheNumb> metacity
[13:53] <TheNumb> ,_,
[13:53] <ubuntu_user> ok
[13:53] <tux_> hello. noob here. I have few questions. 1- is Slitaz based on ubuntu? 2- how can someone add a keyboard layout which is not available on a linux distro ? 3-what are minimum system requirements to run ubuntu on
[13:54] <TheNumb> tux_: How would I know if slitaz is based on ubuntu?
[13:54] <TheNumb> You're better of asking skitaz devs.
[13:54] <TheNumb> off*
[13:55] <ubuntu_user> were you able to test getting the buttons back?
[13:55] <thenewone> how add wps-office to rep ?
[13:55] <TheNumb> ubuntu_user: just a sec
[13:55] <ubuntu_user> why would these idiots take away buttons? who removes such functionality? how dumb!
[13:56] <ubuntu_user> numb: thanks
[13:56] <mcdreamy81> why do the latest upgrades from ubuntu kill my mobile broadband?
[13:56] <malimbar> installed ubuntu gnome, but want to go back to unity cleanly. Is there a way to do ithis cleanly without reinstalling?
[13:57] <TheNumb> ubuntu_user: go to gnome->desktop
[13:57] <TheNumb> in dconf-editor
[13:57] <TheNumb> org->gnome->desktop
[13:57] <ubuntu_user> how do I bring up dconf-editor, just type dconf-editor from a terminal?
[13:58] <TheNumb> yes
[13:58] <TheNumb> or find it in application launcher
[13:58] <ubuntu_user> ok I am in that menu now what do I do?
[13:59] <TheNumb> go to wm
[13:59] <ubuntu_user> I have gnome hilighted but no options appear
[13:59] <TheNumb> and click on preferences
[13:59] <ubuntu_user> ok
[13:59] <TheNumb> find button-layout
[14:00] <TheNumb> What's the Value?
[14:00] <Userman> Hi. I am currently connected through a webclient with an irc-server. How can I find out the server-ip?
[14:00] <ubuntu_user> appmenu:close
[14:00] <ubuntu_user> but the entire way the borders look has changed too
[14:00] <ubuntu_user> what controls this in the window?
[14:01] <ubuntu_user> like the windows used to be more rounded vice squared as they are now
[14:01] <TheNumb> ubuntu_user: well, metacity is a part of gnome project so...
[14:01] <TheNumb> ubuntu_user: anyways, make it look like this: appmenu:close,minimize,maximize:
[14:02] <ubuntu_user> let me ask you something
[14:02] <ubuntu_user> what is a theme is that something metacity has to change what windows look like?
[14:02] <TheNumb> it can change the headerbar color, the window color
[14:03] <TheNumb> And many other settings.
[14:03] <MonkeyDust> !themes
[14:03] <c0mrad3> how to shift to gdm in ubuntu
[14:03] <mcdreamy81> exit
[14:03] <TheNumb> c0mrad3: you install it.
[14:03] <ubuntu_user> I just want the old one I had
[14:03] <TheNumb> And then you're going to be asked which login manager you want to use.
[14:03] <ubuntu_user> it was the old default
[14:04] <TheNumb> ubuntu_user: the window theme or the button layout?
[14:04] <ubuntu_user> now I am confused
[14:04] <ubuntu_user> ok, didn't someone say that the window theme also effects the button layout?
[14:05] <ubuntu_user> or am I confused?
[14:05] <TheNumb> Someone probably did.
[14:05] <TheNumb> ubuntu_user: did you change it to appmenu:close,minimize,maximize: ?
[14:05] <ubuntu_user> so since my windows look different (squared instead of rounded) is that a theme issue that this changed?
[14:05] <TheNumb> ubuntu_user: probably.
[14:05] <ubuntu_user> can I try other themes? How do I change it?
[14:05] <TheNumb> Gnome devs do make some changes between releases.
[14:05] <ubuntu_user> how do I change themes?
[14:06] <ubuntu_user> what menue does that
[14:06] <TheNumb> !themes
[14:06] <TheNumb> !changethemes
[14:06] <ubuntu_user> !changethemes
[14:06] <TheNumb> There are lots and lots of gtk themes.
[14:07] <ubuntu_user> that page is for 11.04
[14:07] <ubuntu_user> is there a page for 15.04 on how to change themes?
[14:07] <TheNumb> ubuntu_user: it's not that outdated.
[14:09] <TheNumb> ubuntu_user: http://askubuntu.com/questions/262868/how-to-set-icons-and-theme-from-terminal
[14:09] <ubuntu_user> wow, I gotta use the the terminal?
[14:09] <ubuntu_user> there is no program to do this huh?
[14:09] <TheNumb> there is
[14:10] <TheNumb> I know at least two of them.
[14:10] <ubuntu_user> ok
[14:10] <MonkeyDust> ubuntu_user  read the links that ubottu sends you
[14:10] <TheNumb> But! One is for gnome and one is for Unity.
[14:10] <ubuntu_user> its for unity crap
[14:10] <ubuntu_user> I do not use unity
[14:10] <ubuntu_user> I use metacity
[14:11] <TheNumb> ubuntu_user: you could try using gnome-tweak-tool to change the theme.
[14:12] <TheNumb> ubuntu_user: also, gnome 3.16+ is not using metacity any more
[14:12] <ubuntu_user> $ gnome-tweak-tool WARNING : Shell not installed or running
[14:13] <TheNumb> So you might be in trouble in the future.
[14:13] <ubuntu_user> but its on my menu to select it at login
[14:13] <ubuntu_user> what should I use since metacity is broken now your saying?
[14:13] <ubuntu_user> or missing
[14:13] <ubuntu_user> or whatever
[14:13] <TheNumb> It's not broken.
[14:13] <x4w3> ubuntu_user: sudo apt-get install gnome-tweak-tool
[14:13] <TheNumb> ubuntu_user: but it's going away at some point.
[14:14] <ubuntu_user> $ sudo apt-get install gnome-tweak-tool Reading package lists... Done Building dependency tree        Reading state information... Done gnome-tweak-tool is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[14:14] <TheNumb> metacity is not going to be ported to wayland
[14:14] <ubuntu_user> what is wayland?
[14:14] <TheNumb> !wayland
[14:14] <ubuntu_user> good lord
[14:14] <ubuntu_user> quite confusing
[14:14] <x4w3> ubuntu_user gconf-editor run it.
[14:14] <ubuntu_user> all this to get my damn buttons back
[14:15] <TheNumb> ubuntu_user: you don't need to do any of that.
[14:15] <TheNumb> UGH!
[14:15] <ubuntu_user> huh?
[14:15] <ubuntu_user> I am confused
[14:15] <x4w3> ubuntu_user: gconf_editor - navigate to apps > metacity > general and change the "theme" value to the name of the theme you want to use
[14:15] <TheNumb> You're not reading what I typed earlier.
[14:15] <ubuntu_user> I just want thing sto look like they did before
[14:16] <TheNumb> [16:01:54] <TheNumb> ubuntu_user: anyways, make it look like this: appmenu:close,minimize,maximize:
[14:16] <TheNumb> Did you do that?
[14:16] <designbybeck> A number of Releases ago....maybe back before 12.04.... You use to could save the Keyboard Layout window as a PDF, but now you can't. This was a helpful feature if you use multiple languages and need to see the other keystrokes
[14:16] <ubuntu_user> no, because the windows are also wrong they are squared off and used to be rounded
[14:16] <learntux> reinstalled windows on my dual boot machine and grub is gone now  .. Whats the easiest way to restore it back
[14:16] <learntux> i mean any boot disk in particular or just use the live disk
[14:16] <ubuntu_user> x4w3: no such theme value
[14:17] <TheNumb> x4w3: metacity has moved to gsettings
[14:17] <TheNumb> gconf is dead
[14:17] <ubuntu_user> huh?
[14:17] <ubuntu_user> why is this so hard!?!
[14:18] <x4w3> TheNumb: thank u.
[14:18] <ubuntu_user> Why cant my windows be rounded like before?
[14:18] <TheNumb> ubuntu_user: because the software you're using is no longer being actively developed.
[14:18] <ubuntu_user> what did ubuntu change this way
[14:18] <TheNumb> Ubuntu didn't do anything.
[14:18] <TheNumb> The developer broke it.
[14:18] <ubuntu_user> Ubuntu is the developer!
[14:18] <TheNumb> no
[14:18] <TheNumb> ubuntu provides the packages
[14:18] <TheNumb> they don't develop metacity
[14:19] <ubuntu_user> who developed metacity?
[14:19] <TheNumb> The GNOME project
[14:19] <ubuntu_user> and how do I change the themes so the windows are rounded again?
[14:19] <ubuntu_user> A number of things changed not just the buttons
[14:19] <TheNumb> not possible as far as I can tell
[14:19] <TheNumb> You could try using other theme.
[14:21] <TheNumb> ubuntu_user: it's even more broken in gnome 3.16
[14:21] <stianhj> learntux: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows
[14:21] <TheNumb> metacity no longer draws the window borders
[14:21] <TheNumb> mutter does that
[14:21] <ubuntu_user> how do I change the theme
[14:22] <ubuntu_user> there is a program to do that easily?
[14:22] <TheNumb> gnome-tweak-tool should be able to do that
[14:22] <TheNumb> you need to install a theme first
[14:22] <MonkeyDust> ubuntu_user  or unity-tweak
[14:22] <TheNumb> MonkeyDust: he doesn't use unity
[14:22] <MonkeyDust> ok
[14:22] <TheNumb> I'm not sure if unity-tweak changes metacity's theme.
[14:22] <ubuntu_user> gnome-tweak-tool does not start
[14:23] <learntux> Thanks <stianhj> . :) on it now
[14:25] <ubuntu_user> no matter what theme I use the buttons do not come back
[14:25] <TheNumb> dud
[14:25] <TheNumb> e
[14:26] <TheNumb> You're not following me
[14:26] <TheNumb> You didn't change the key value
[14:26] <TheNumb> ...
[14:27] <TheNumb> ubuntu_user: gsettings set org.gnome.desktop.wm.preferences button-layout appmenu:close,minimize,maximize:
[14:27] <TheNumb> try that
[14:27] <TheNumb> let me know if it works
[14:28] <ubuntu_user> ok I figured out what you meant in dconf editor now
[14:28] <ubuntu_user> it fixed it
[14:28] <ubuntu_user> but the windows are still different
[14:28] <ubuntu_user> they are squared instead of rounded
[14:28] <ubuntu_user> used to be rounded
[14:31] <ubuntu_user> I changed window to ambiance in gnome-tweak-tool
[14:31] <ubuntu_user> seems to look more like it did before
[14:31] <ubuntu_user> I hate when the ubuntu people break stuff!
[14:31] <ubuntu_user> hey wait - not fixed yet entirely!
[14:31] <TheNumb> ubuntu_user: gnome people, not ubuntu.
[14:32] <ubuntu_user> when I start gnome-tweak-tool it still is mixing the buttons!!!
[14:32] <TheNumb> Don't start it then.
[14:33] <ubuntu_user> but it seems that the change we made is not global
[14:33] <TheNumb> it should be
[14:33] <ubuntu_user> why would it not effect gnome-tweak-tool
[14:33] <ubuntu_user> shouldnt that have 3 buttons now too?
[14:33] <TheNumb> because it's using headerbars
[14:33] <ubuntu_user> I restarted it
[14:33] <ubuntu_user> its using what?
[14:33] <RabbitJack> Hello, im looking to stop the NetworkManager daemon in 14.04 but it keeps poping back up. Anyone know how i can stop this process in a way that will allow me to start it when im ready?
[14:34] <ubuntu_user> but in the old ubuntu all my programs had these 3 choices on the windows
[14:34] <ubuntu_user> all of them
[14:34] <ubuntu_user> did we not fix it globally?
[14:34] <TheNumb> ubuntu_user: go to window settings in gnome-tweak-tool and flip the switch on maximize and minimize
[14:34] <TheNumb> it should fix that too
[14:35] <ubuntu_user> not sure I see waht you mena
[14:35] <ubuntu_user> mean
[14:35] <ioria> RabbitJack, sudo service Network-Manager stop  ... not working ?
[14:35] <ubuntu_user> no such option
[14:35] <segaboy> looking for a way to prohibit certain aspects of apt-get
[14:35] <TheNumb> There should be a "Windows" tab on the left
[14:35] <TheNumb> ubuntu_user:
[14:35] <ubuntu_user> ok
[14:35] <segaboy> i want to disable 'dist-upgrade'
[14:35] <ubuntu_user> found that tab
[14:35] <RabbitJack> ioria: no bootstrap in init.d, first place i looked
[14:36] <segaboy> but i still want to allow apt-get.
[14:36] <ubuntu_user> still no such option as you describe even with the window tab selected
[14:36] <TheNumb> ubuntu_user: no minimize and maximize labels?
[14:37] <TheNumb> ubuntu_user: can you post a screenshot?
[14:37] <ubuntu_user> dont see what you mean
[14:37] <ubuntu_user> how?
[14:37] <ubuntu_user> I took a screenshot
[14:37] <ubuntu_user> how do I paste it in here?
[14:37] <TheNumb> take a screenshot and upload it to ibin.com or something
[14:37] <TheNumb> ibin.co*
[14:37] <segaboy> looking for a clever way to disable certain options of apt-get.
[14:37] <TheNumb> or imgur.com
[14:37] <TheNumb> whatever
[14:37] <ioria> RabbitJack, try sudo service NetworkManager stop
[14:38] <segaboy> is this possible?
[14:38] <pbx> segaboy, get specific about what you want to do and why
[14:38] <ubuntu_user> do what?
[14:38] <RabbitJack> ioria: Sure thing, ill let you know how it goes
[14:38] <TheNumb> ubuntu_user: upload it
[14:38] <ubuntu_user> huh?
[14:39] <segaboy> pbx, i had explained it moments ago. i want to disallow 'dist-upgrade' from apt-get. i need to do that because running it would break our custom appliance.
[14:39] <RabbitJack> ioria: output: 'NetworkManager: unrecognized service'
[14:39] <ubuntu_user> I am trying to paste into the chat
[14:39] <TheNumb> ubuntu_user: there is a button called "upload image"
[14:39] <TheNumb> ubuntu_user: don't paste it in the chat.
[14:39] <TheNumb> ubuntu_user: go to imgur.com
[14:39] <ubuntu_user> then I do not know what to do
[14:39] <ubuntu_user> do I need an account on imgur.com?
[14:39] <ioria> RabbitJack, ps -A | grep NetworkManager
[14:39] <TheNumb> ubuntu_user: no
[14:39] <ubuntu_user> ok I went to that website
[14:39] <ubuntu_user> now what?
[14:40] <TheNumb> paste in the image
[14:40] <ubuntu_user> ok wait
[14:40] <RabbitJack> ioria: Have a running process, output: 2523 ?        00:00:00 NetworkManager
[14:40] <ellinggton> hello, i need help, if you can, about intel HD graphics
[14:40] <ubuntu_user> http://imgur.com/Iz9BCHB
[14:41] <ubuntu_user> TheNumb: http://imgur.com/Iz9BCHB
[14:41] <TheNumb> hmm
[14:41] <ioria> RabbitJack, it's weird that you can't stop it
[14:41] <TheNumb> it's missing
[14:41] <RabbitJack> ioria: When i kill it shows back up with antoher PID, so somehting is checking for it and booting it up when its missing.
[14:41] <TheNumb> interesting
[14:41] <TheNumb> maybe it's only available in gnome-shell
[14:41] <ellinggton> i run ubuntu 14.10, and have intel HD drivers installed via the inel-linux-tool
[14:41] <RabbitJack> ioria: Ya, in older Ubuntu releases i never had this issue
[14:41] <dell_> hola
[14:42] <ellinggton> but that f... driver don't works !
[14:42] <ellinggton> i've got an 16/9 screen display
[14:42] <TheNumb> ellinggton: blame intel. Only drivers from the official repository are supported here.
[14:42] <ioria> RabbitJack, sudo service network-manager status ?
[14:42] <ubuntu_user> huh?
[14:42] <ellinggton> TheNumb, : i tried also
[14:43] <TheNumb> ubuntu_user: not sure how to fix that then.
[14:43] <ellinggton> and i cannot have any superior resolution
[14:43] <ellinggton> than 1080*768
[14:43] <RabbitJack> ioria: no network-manager script, output 'network-manager: unrecognized service'
[14:43] <ubuntu_user> damn ubuntu people
[14:43] <ubuntu_user> alwaying breaking stuff
[14:43] <TheNumb> ubuntu_user: not ubuntu
[14:43] <TheNumb> ubuntu_user: GNOME
[14:43] <ioria> RabbitJack, you miss something
[14:43] <TheNumb> It's GNOME software you're using, not ubuntu.
[14:44] <RabbitJack> ioria: im missing somehting or i missed something in the command? (both very possible)
[14:44] <TheNumb> ubuntu_user: try gsettings set org.gnome.shell.overrides button-layout close,minimize,maximize:
[14:44] <TheNumb> It might work
[14:44] <ioria> RabbitJack, no, the command works for me, i think it's ok
[14:45] <RabbitJack> ioria: Ah, well thats good to know it worked for you. Then i broke something, somewhere and this is a 'ME' issue.
[14:45] <ellinggton> well, all i need, is a way to user my display all full resolution
[14:45] <RabbitJack> ioria: Thanks for the help, i think you saved me much google/grep/scrip crawling time
[14:46] <ioria> RabbitJack, what did you do lately ?
[14:46] <TheNumb> ubuntu_user: you might want to install full ubuntu gnome and try the "classic" session
[14:46] <TheNumb> I'm off.
[14:46] <ubuntu_user> how do I do that?
[14:46] <ubuntu_user> install full ubuntu gnome?
[14:46] <RabbitJack> ioria: this install been up for a while (half-year). However i did not do much that i cna think of that would change the system's infrastructure...
[14:47] <ubuntu_user> how do Install full ubuntu gnome?
[14:47] <ellinggton> ubuntu_user, you might go on full install
[14:47] <ellinggton> dl an iso
[14:47] <ubuntu_user> huh?
[14:47] <ioria> RabbitJack, try to apt-get update, upgrade, dist-upgrade
[14:47] <ubuntu_user> I did that
[14:47] <ubuntu_user> I did do-release-upgrade
[14:48] <ubuntu_user> went from 14.10 to 15.04
[14:48] <ubuntu_user> how do I install full gnome?
[14:48] <ellinggton> yes, you dl an new iso of ubuntu gnome, brun it on dvd or usb key
[14:48] <ellinggton> and full install
[14:48] <RabbitJack> ioria: Ok, ill put that on the TODO heap, have some other processes that need to finish first. will pull that off by cob if i dont work this out sooner.
[14:49] <ioria> RabbitJack, ok
[14:49] <ellinggton> ubuntu_user, i assume that dist-upgrade went wrong ?
[14:49] <ubuntu_user> do-release-upgrade
[14:49] <ubuntu_user> that is what I did
[14:49] <ubuntu_user> then I did dist-upgrade afterwards
[14:49] <ubuntu_user> found some instructions saying that was how to do the upgrade whatever
[14:49] <ubuntu_user> did I break something now cause I did it that way???
[14:50] <ellinggton> i never do this because of damn sh..t happening every time
[14:50] <ellinggton> so i use full install from scratch
[14:50] <ubuntu_user> well people can upgrade
[14:50] <ubuntu_user> I have no time for a full re-install
[14:50] <ubuntu_user> then reconfiguring everything
[14:50] <vanschagen> its so easy
[14:50] <ubuntu_user> and loossing settings
[14:50] <ubuntu_user> and crap
[14:50] <ubuntu_user> screw that
[14:50] <ubuntu_user> it needs to upgrade properly
[14:50] <ellinggton> you will spend more time trring to save it !
[14:51] <ubuntu_user> or its a bad distro
[14:51] <ubuntu_user> ok, I need to stay focused on fixing my problem
[14:51] <ubuntu_user> how do Install full gnome?
[14:51] <ubuntu_user> what is missing on what I have now?
[14:51] <ellinggton> i came late, so, qht's the matter so far ?
[14:51] <ellinggton> what's the problem ?
[14:52] <ubuntu_user> I used to have min, max, and exit on EVERY window
[14:52] <ubuntu_user> now I do not
[14:52] <ubuntu_user> just "X"
[14:52] <ubuntu_user> brb
[14:52] <xangua> ubuntu_user: that's just how gnome made things now
[14:52] <ellinggton> and getting rid of it, purge gnome and install it again ?
[14:53] <ubuntu_user> how do I fix it back?
[14:53] <ellinggton> or
[14:53] <ellinggton> getting rid of .config file
[14:53] <ubuntu_user> ok
[14:53] <ubuntu_user> let me logoff and try that
[14:54] <xangua> ubuntu_user: get involved in gnome development, become the boss and change back things
[14:55] <kiks> ubuntu_user,  you can install gnome-tweak-tool and just enable minimize and maximize buttons
[14:55] <ellinggton> btw, on gnome windows, there is only X tu close now
[14:55] <chotaz`w> gnome's gone retard for a while now
[14:56] <ellinggton> kiks, is right
[14:56] <wastrel> omg
[14:56] <ellinggton> any of you, i need an advice
[14:57] <ellinggton> i have an 16/98 display
[14:57] <ellinggton> 16/9
[14:57] <MonkeyDust> ellinggton  keep your question in one line, it's easier to read and repeat
[14:57] <ellinggton> but i cannot have a resolution more than ':3
[14:57] <ellinggton> sorry
[14:58] <gregL> ubuntu_user this command will give you min,max,exit.... You may have to use sudo I don't  recall.   in a terminal   gsettings set org.gnome.shell.overrides button-layout :minimize,maximize,close
[14:59] <ellinggton> i cannot have a resolution more than 1080*768 in 4/3, but my display is 1920*1200 16/9, so why ? i run utopic unicorn, with an g1820 intel proc
[14:59] <kiks> ellington, install the latest graphics drivers for your card
[14:59] <ellinggton> no cg, juste HD graphics from g1820
[15:01] <k1l> ellinggton: desktop or laptop?
[15:01] <ellinggton> desktop
[15:01] <ellinggton> a mini itx desktop
[15:02] <k1l> how is the monitor connected?
[15:02] <k1l> adapters involved?
[15:02] <ellinggton> vga via dvi adaptor
[15:02] <k1l> adapters are known to be problematic
[15:03] <ellinggton> can it be just the vga/dvi adatpor ???
[15:03] <ubuntu_user> ok seems that once I logged off and back on it was fixed entirely
[15:03] <wastrel> what's the difference between gconf and dconf
[15:03] <ubuntu_user> now I have a different problem!
[15:03] <ellinggton> ubuntu_user, glad to read !
[15:03] <ubuntu_user> xchat keeps blowing up
[15:03] <ellinggton> oups
[15:03] <k1l> ellinggton: yep. sometimes the adapter just offer the basic vga features like 1024x...
[15:03] <ubuntu_user> xchat-irc and xchat gnome irc
[15:04] <k1l> wastrel: dconf is the new gconf. gnome changed to dconf on the gnome3 base
[15:04] <ubuntu_user> keep blowing up as soon as I try to click on the menu
[15:04] <ellinggton> ok... i'll give it a try with an other then
[15:04] <kiks> ellinggton, http://community.linuxmint.com/tutorial/view/877
[15:04] <MonkeyDust> ubuntu_user  tip: get used to the ubuntu desktop, so we don't have to hold your hand in the learning process
[15:04] <ubuntu_user> anyone aware of why xchat might blow up on execution
[15:04] <ubuntu_user> I do not use unity
[15:04] <k1l> ubuntu_user: "blow up"?
[15:04] <ubuntu_user> I have removed it
[15:05] <killall> ifconfig
[15:05] <k1l> ubuntu_user: what desktop do you use then?
[15:05] <ubuntu_user> gnome metacity
[15:05] <xangua> ubuntu_user: so you installed gnome shell and removed unity before or after upgrading to 15.04¿ maybe that messed uo your install
[15:05] <ubuntu_user> before the upgrade
[15:05] <xangua> ubuntu_user: if you mean fallback mode, ye‎s it uses metacity
[15:06] <ubuntu_user> I think I need to extirpate unity again
[15:06] <ubuntu_user> maybe the upgrade put that crap back
[15:06] <xangua> ubuntu_user: I think you didn't even had to remove it
[15:06] <xangua> just don't use it...
[15:06] <ubuntu_user> I do not even want it wasting space on my system
[15:06] <ubuntu_user> its junk
[15:07] <ubuntu_user> anyway, forget that, why does xchat keep blowing up?
[15:07] <xangua> then maybe you should have installed ubuntu gnome in first place
[15:07] <ubuntu_user> can we refocus on my 2nd issue
[15:07] <ubuntu_user> I am going to try that
[15:07] <ubuntu_user> but for now, I have what I have
[15:07] <k1l> k1l> ubuntu_user: "blow up"?
[15:07] <ubuntu_user> any idea why xchat blows up?
[15:07] <ubuntu_user> yes
[15:07] <k1l> explain "blow up"
[15:07] <k1l> does it crash?
[15:07] <ubuntu_user> yes
[15:08] <wastrel> i learned how to set my pointer acceleration from the command line
[15:08] <k1l> first, dont use xchat-gnome. that is a trimmed down xchat version.
[15:08] <wastrel> because apparently unity sees my usb mouse and my trackpoint pointer as the same thing
[15:08] <wastrel> ⴾ[
[15:08] <ubuntu_user> ok
[15:08] <ubuntu_user> just xchat regular
[15:09] <ubuntu_user> that also blows up
[15:09] <k1l> ubuntu_user: when does it crash? is there an errormessage?
[15:09] <k1l> !details
[15:09] <ubuntu_user> right after I try to connect to irc.icq.com
[15:10] <ubuntu_user> other networks it is fine
[15:10] <dadis> hi, what do I need to purge to get factory default pulse settings?
[15:10] <k1l> so its a "xchat crashes on connecting to icq irc" issue
[15:10] <dadis> I changed a config to try to get bluetooth working and it slightly borked me
[15:10] <ellinggton> k1l, it is not that, i tried an ather one, wich is in use on my other pc, and provide me full resolution with my display.
[15:10] <ubuntu_user> uh I guess
[15:11] <kiks> ellinggton, did you try http://community.linuxmint.com/tutorial/view/877 ?
[15:12] <ellinggton> kiks not yet, will read this now
[15:12] <k1l> ubuntu_user: are you usre icq offers that irc servers?
[15:13] <ubuntu_user> k1l: do not understand your question
[15:13] <k1l> ubuntu_user: is that a valid irc server?
[15:13] <ubuntu_user> I am using irc.icq.com
[15:13] <ubuntu_user> yes
[15:13] <ubuntu_user> it is
[15:14] <k1l> then start xchat from a terminal and see what error is there after you try to connect to that server
[15:14] <dadis> fixed it lol
[15:15] <dadis> --purge pulse audio
[15:15] <dadis> so simple
[15:15] <ellinggton> kiks,  thank you sooooooooooooo muck !
[15:15] <ellinggton> much
[15:15] <ubuntu_user> ok
[15:15] <ubuntu_user> one sec
[15:15] <kiks> did it work ellinggton ?
[15:15] <ellinggton> yes indeed
[15:16] <kiks> :)
[15:16] <ubuntu_user> *** stack smashing detected ***: xchat terminated Aborted (core dumped)
[15:16] <ellinggton> i must find the perfect reso for my screen now
[15:17] <ubuntu_user> the only stack I have is a small amount of cash
[15:17] <ubuntu_user> what does that have to do with xchat? :)
[15:18] <ubuntu_user> k1l?
[15:19] <ubuntu_user> anyone can help with the xchat error?
[15:19] <ellinggton> strange ubuntu_user
[15:19] <ubuntu_user> yes
[15:19] <ubuntu_user> *** stack smashing detected ***: xchat terminated Aborted (core dumped)
[15:20] <ellinggton> what google says about it ?
[15:20] <ubuntu_user> nothing
[15:21] <ubuntu_user> brb
[15:21] <k1l> ubuntu_user: dont know. maybe the icq irc is strange, or your system setup
[15:22] <k1l> take a look into .xsession-errors if that gives more clue
[15:22] <ubuntu_user> anyone here has xchat that they can try connecting to irc.icq.com?
[15:22] <kiks> connect without any problem on hexchat
[15:22] <drmagoo> hi, I have an issue with my nvidia GTX960 graphicscard. I'm running a dual-head setup and when the computer "wakes up" all the applications that were on the right monitor are "hidden" somewhere in the background. And it takes some job to get them back to the foreground. I'm currently  using nvidias "own" drivers, since the standard repo driver doesnt support that card. But has anyone experienced this problem and found a solution for it ?
[15:23] <rebs> sudo restart ssh
[15:23] <rebs> restart: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused
[15:23] <ubuntu_user> did you try xchat?
[15:23] <rebs> what does that mean?
[15:24] <kiks> ubuntu_user, not yet
[15:24] <k1l> rebs: which ubuntu?
[15:24] <ubuntu_user> what is hex chat?
[15:24] <rebs> 15.04
[15:24] <k1l> ubuntu_user: hexchat is the new xchat.
[15:24] <k1l> rebs: it uses systemd now. not upstart
[15:24] <ubuntu_user> oh
[15:24] <rebs> so what do i need to configure to allow for that change k1l
[15:25] <ubuntu_user> let me try it
[15:25] <griffin_> hi everyone
[15:25] <k1l> rebs: use systemctl to start, stop, restart systemd services
[15:25] <rebs> thanks k1l!
[15:26] <kiks> ubuntu_user,  no problem with xchat too
[15:26] <griffin_> does anyone manage to install octopussy on ubuntu 15.04 ? pls
[15:27] <MonkeyDust> !info octopussy
[15:27] <ubuntu_user> k1l: is there a way to import my xchat settings into hexchat?
[15:27] <ubuntu_user> hexchat does work on irc.icq.com!
[15:27] <ubuntu_user> banned users
[15:27] <ubuntu_user> friend lists
[15:27] <ubuntu_user> etc...
[15:27] <Juon> Hi
[15:27] <k1l> ubuntu_user: copy the stuff in the .xchat folder to the hexchat folder. but it might be a user settings that lead to that crashes
[15:28] <kiks> ubuntu_user, http://hexchat.readthedocs.org/en/latest/faq.html#how-do-i-migrate-my-settings-from-xchat
[15:28] <ubuntu_user> what is the name of the hexchat folder?
[15:28] <ubuntu_user> ok let me try that link
[15:28] <ubuntu_user> 1 second
[15:32] <waspinator> does ubuntu have a way of connecting to an active directory like gnome, or do you have to use 3rd party packages?
[15:32] <griffin_> thanks anyway
[15:32] <ubuntu_user> kiks: the migration faq worked well, thank you!
[15:32] <ubuntu_user> and so does hexchat seem superiour to xchat
[15:32] <ubuntu_user> xchat will now be extirpated!?!
[15:32] <kiks> :)
[15:33] <kiks> ubuntu_user, unsure of that
[15:33] <OerHeks> waspinator, there are 3 wiki's > https://help.ubuntu.com/community/ActiveDirectoryHowto  >> https://help.ubuntu.com/lts/serverguide/samba-ad-integration.html >>  https://help.ubuntu.com/community/ActiveDirectoryWinbindHowto
[15:33] <ubuntu_user> unsure of what?
[15:33] <byaweb> using hexchat instead of xchat
[15:34] <byaweb> please
[15:34] <ubuntu_user> it seems to work better
[15:34] <kiks> "xchat will now be extirpated!?!"  <--- that
[15:34] <ubuntu_user> what was confusing?
[15:34] <kiks> nvm ;)
[15:35] <waspinator> OerHeks, all those look pretty hard. Nothing like gnome? https://help.gnome.org/admin/system-admin-guide/stable/login-enterprise.html.en
[15:35] <ubuntu_user> extirpate: to root out and destroy and in the instant case I am using root to destroy with an apt-get purge!
[15:35] <ubuntu_user> hence the words applicability is proper
[15:35] <ubuntu_user> but I did uninstall xchat and xchat-gnome now
[15:36] <ubuntu_user> bother are now extirpated! :)
[15:36] <byaweb> hexchat is what i am using
[15:36] <kiks> ubuntu_user,  I need to catch up with all these terminologies... :P
[15:36] <ubuntu_user> it seems superiour
[15:36] <ubuntu_user> I understand...both parents were certified English teachers...sorry
[15:37] <ubuntu_user> I shall try to use a less confusing vernacular
[15:37] <kiks> @_@
[15:38] <ubuntu_user> thanks to everyone for the help today!
[15:39] <waspinator> I tried installing ubuntu gnome 14.04 but its missing the enterprise options in the user panel.
[15:39] <gh0strider> Hmm...
[15:40] <kiks> that's nice of you... ubuntu_user
[15:40] <ubuntu_user> well I do appreciate everyones help, so I must say so!
[15:40] <ioria> ubuntu_user   that 'stack smashing detected' is interesting , never occurred before ?
[15:41] <ubuntu_user> I stand in greap appreciation of the assistance I received today and would place it amongst my most treasured memories.
[15:41] <ubuntu_user> it did occur prior to the 15.04 upgrade
[15:41] <ubuntu_user> yes
[15:41] <ubuntu_user> but
[15:41] <ubuntu_user> hexchat seems to work fine
[15:41] <ubuntu_user> and seems better
[15:42] <ioria> ubuntu_user   usually it means that you are putting too much data  in a buffer... are you 32 or 64 bit ?
[15:43] <ubuntu_user> 64 bit of course, this is not the 80s!
[15:43] <ioria> :P
[15:43] <ubuntu_user> why I do not have my picture of the disco duck around anymore either!
[15:44] <ubuntu_user> for the youngins here: http://en.wikipedia.org/wiki/Disco_Duck
[15:44] <kiks> waspinator, what do you mean by enterprise option? elaborate
[15:44] <waspinator> kiks, https://help.gnome.org/admin/system-admin-guide/stable/login-enterprise.html.en
[15:45] <waspinator> I want to connect to an active directory, but all the guides for ubuntu seem much more difficult than the gnome one. I'm not very good at command line / config file editing
[15:46] <ubuntu_user> I am now able to use hex chat to chat here!
[15:46] <byaweb> yeah, hexchat is so similar to old xchat
[15:46] <byaweb> right
[15:47] <cfedde> apt-get install openntpd is failing for me. Does anyone know where I can find a clue? https://gitlab.com/snippets/5512
[15:48] <byaweb> using aptitude search openntpd first of all
[15:48] <kiks> waspinator, idk sorry
[15:49] <waspinator> kiks, hmm darn. I guess I'll try debian gnome
[15:50] <cfedde> byaweb: how does that help me?
[15:50] <Pici> cfedde: I see a few open bugs about this issue, sadly some are a few years old with no solution :(
[15:50] <Kartagis> Hi. I've got Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) on my 14.04 and I get https://dl.dropboxusercontent.com/u/11918318/Screenshot%20from%202015-06-02%2006%3A28%3A11.png after a while. any ideas?
[15:51] <cfedde> Pici: crumbs. Oh well.
[15:51] <MonkeyDust> Kartagis  what is all that?
[15:52] <Kartagis> MonkeyDust: that's terminator
[15:52] <Kartagis> a terminal
[15:53] <MonkeyDust> Kartagis  and what is the issue exactly?
[15:53] <Kartagis> MonkeyDust: I get that distortion all over
[15:53] <kiks> MonkeyDust, I think he has an issue with screen tearing
[15:54] <Kartagis> and not just with terminator
[15:55] <kiks> Kartagis, did you try enabling vsync from ccsm?
[15:55] <Kartagis> kiks: I'm not on compiz
[15:56] <Kartagis> wait, am I? let me check
[15:56] <Kartagis> brb
[15:57] <Kartagis> yes I am
[15:58] <Kartagis> how do I check whether I enabled vsync?
[15:58] <drmagoo> anyone here who have experienced problem with their gtx960-card and recovering their desktop after the monitors have been to "sleep".
[15:59] <kiks> Kartagis, sudo mkdir /etc/X11/xorg.conf.d/
[15:59] <kiks> Kartagis, echo -e 'Section "Device"\n Identifier "Intel Graphics"\n Driver "Intel"\n Option "AccelMethod" "sna"\n Option "TearFree" "true"\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf
[15:59] <kiks> Kartagis, sudo reboot
[16:03] <asmodai_> I know this isn't kali linux but presumably i would add a user to sudoers like i would in ubuntu right?
[16:03] <kiks> asmodai_, yes
[16:04] <asmodai_> and the command to do that pls?
[16:04] <Kartagis> I did, I'll try that. thanks kiks
[16:04] <kiks> Kartagis, ok
[16:05]  * zykotick9 notes kali is not even based on ubuntu, and is not intended to be used as a general purpose distro, so isn't sure why a user would need to be created...
[16:05] <asmodai_> i have it on a vbox
[16:06] <k1l> zykotick9: people think that those "hacker linux" distros are cool. so they want to use it for everything, leaving out they are not meant to be used for that
[16:06] <asmodai_> and the reason why is because im learning how to use it so before i do that in root on a constant basis.... i rather do it with less privileges
[16:06] <kiks> asmodai_, sudo adduser <username> sudo
[16:06] <k1l> asmodai_: thos pentesting distros are not safe anyway. they are meant to test.
[16:07] <asmodai_> @kil - i know their used as tools but i dont personally see the point in using it like that
[16:07] <k1l> asmodai_: so best is to ask their support since that is different a lot from ubuntu setups.
[16:07] <asmodai_> ok
[16:07] <epicepic> how do i chown nor chmod for cifs mounted folder ?
[16:08] <asmodai_> im also having an issue with wireshark on my host system
[16:09] <asmodai_> i want wreshark to be used without privelege but dumpcap has to have privelege
[16:09] <asmodai_> is there a workaraound i can do to resolve this?
[16:13] <griffin_> asmodai_: http://packetlife.net/blog/2010/mar/19/sniffing-wireshark-non-root-user/
[16:15] <griffin_> asmodai_: a good tuto that helped me to resolve that
[16:15] <asmodai_> thankyou. The other ones I looked at before asking here were too vague and had mistakes which i had to undo which was time consuming in the end lol
[16:17] <colem> I was wondering if any suspend/hibernate gurus were around. I'm running Caffeine with a keyboard shortcut to set dpms force off. I want the screen to sleep but I want to postpone suspend to ram.
[16:17] <griffin_> i wouldn't say time consuming but good try and experience with lot of fun
[16:17] <griffin_> ;)
[16:19] <asmodai_> @griffin - how do I check if I have a package install without using apt-get or synaptics?
[16:19] <colem> It's as good as Caffeine on Mac. It -should- be better lol
[16:19] <asmodai_> its little things like that which are bugging me lol
[16:20] <dionysus69> to terminate certain things in terminal I need ctrl + C but I am using that one for copying, how can I change termination shortcut to lets say ctrl + shift + c?
[16:21] <wastrel> in gnome-terminal ctrl-shift-c is the copy command
[16:21] <dionysus69> nevermind, it remapped itself
[16:21] <asmodai_> dionysus system setting>keyboard
[16:21] <griffin_> asmodai_, good question, maybe use whereis or locate to find something installed
[16:22] <dionysus69> ye I changed copy to a ctrl + c shortcut, I just discovered ctrl + shift+ c became termination automatically
[16:22] <wastrel> and it's edit > keyboard shortcuts   in gnome-terminal
[16:22] <asmodai_> @griffin like I said it's small things like that which sends me off on a a ten minute search to find the correct answer lol
[16:22] <colem> dionysus69: did you suggest you were using the wrong keystroke for copying? It were ^-shift-C?
[16:23] <colem> lol
[16:23] <dionysus69> no no I wanted to change copying so it does as it does everywhere else
[16:23] <dionysus69> i just didnt want to loose the termination command so instead of ctrl + c i was forced to use ctrl + z in certain cases and it does different thing
[16:24] <wastrel> ⴾ[
[16:24] <asmodai_> and this is why i stopped mucking with keyboard shortcuts hehehe
[16:24] <asmodai_> I did exactly the same thing. in the end i defaulted the keyboard settings
[16:24] <asmodai_> at least until i learn how to map them right
[16:27] <colem> You probably don't want to map a clipboard to ctrl-c in a terminal. It's crucial from the bottom up
[16:29] <wastrel> the rest of the world should just stop using ctrl-c for copy imho
[16:29] <asmodai_> LOOL
[16:30] <r-a-x> my laptop connects with the wifi but not able to access internet, and wifi is working fine
[16:31] <r-a-x> with the other laptop
[16:31] <robhol> wastrel: and.. use what :p
[16:31] <colem> Do you have an IP address and can you ping your gateway? (The http:// IP that gives you a web config)
[16:32] <wastrel> robhol: ctrl-n
[16:33] <robhol> https://dl.dropboxusercontent.com/u/9408877/fw/rssg.gif
[16:35] <wastrel> idgi
[16:40] <drmagoo> anyone here who have experienced problem with their gtx960-card and recovering their desktop after the monitors have been to "sleep".
[16:44] <jmwebb2112> msg NickServ VERIFY REGISTER jmwebb2112 dxmzxlkesdrg
[16:44] <k1l> jmwebb2112: i would change that password. and to prevent that issues better type that into the server window
[16:44] <asmodai_> hmmm
[16:45] <al2o3-cr> thats not a password
[16:45] <asmodai_> i install wireshark and now im getting a dpkg error
[16:46] <asmodai_> brb
[16:50] <asmodai_> so i think the error was making the wireshark group before after wireshark install. i'm in nano /etc/group. Is remove the group via nano the right way to do it without mucking things up?
[16:52] <OerHeks> asmodai_, you can easily manage groups/users, but the tool is not installed standard ( which is silly, but who am i?), install gnome-system-tools, tool can be found under systemsettings
[16:53] <asmodai_> I prefer to do it in terminal. thats why I moved away from windows
[16:54] <OerHeks> asmodai_, i would remove the group, and purge wireshark, and install again
[16:55] <asmodai_> thats what I'm trying to do. sudo rmgroup /etc/wireshark
[16:55] <al2o3-cr> asmodai_: gpasswd -d <user> <group> # that will remove a user from a group
[16:56] <asmodai_> errr ok ive defo mucked something up just gimme a second i need to find out what I've done
[16:57] <al2o3-cr> asmodai_: groupdel <group> # to remove a group
[16:57] <asmodai_> thats cool but somehow ive locked my username out of sudo
[16:58] <asmodai_> i did this the other day in a different way
[16:59] <wastrel> it's always wise when messing with sudo to open a root shell first
[16:59] <asmodai_> how do i add myself back into sudoers file?
[16:59] <asmodai_> im starting to realise that lol
[17:00] <wastrel> add yourself to the sudo group
[17:00] <asmodai_> it says permission denied
[17:00] <asmodai_> bollocks..... that means a fresh install >:/
[17:00] <genii> Yes, catch-22. You have to boot to single user mode and do it that way
[17:01] <asmodai_> ok so i goto grub and mount fs then change from there right?
[17:01] <asmodai_> in recovery i mean
[17:01] <genii> asmodai_: Pretty much the idea, yes
[17:01] <asmodai_> command to mount in grub?
[17:01] <asmodai_> pls
[17:02] <genii> asmodai_: mount -o remount,rw /
[17:02] <asmodai_> ok hopefully this isnt going to be a fresh install
[17:02] <genii> It may complain about mtab, that's normal
[17:07] <lloyd_> Bonjour
[17:08] <lloyd_> Quelqu'un est dispo pour un problème avec Code::Blocks?
[17:09] <Pici> !fr | lloyd_
[17:09] <lloyd_> ok thanks and sorry
[17:11] <semiautomatic> xubuntu or lubuntu?
[17:11] <semiautomatic> what do you prefer?
[17:12] <genii> !polls
[17:14] <Shadow}}> I gots a question.
[17:15] <NoImNotNineVolt> is wireshark broken?
[17:15] <NoImNotNineVolt> as soon as i open a capture, i get a million gtk errors and it crashes.
[17:16] <semiautomatic> recheck your libraries
[17:16] <pbx> NoImNotNineVolt, give us details.  what ubuntu version, what wireshark version, how did you install it, what are the errors, etc.
[17:16] <semiautomatic> its working good for me
[17:16] <pbx> reinstall and try again isn't a bad first move
[17:17] <NoImNotNineVolt> 14.10, latest wireshark from repo.
[17:17] <NoImNotNineVolt> googling seems to suggest it relates to overlay scrollbars
[17:17] <Shadow}}> This IDE Desktop comptuer has a clock speed of 2.8 GHz, yet it had only 256 RAM. I put it another card making it 512ram, But it still can't handle installing from a DVD so... Is Memory the problem or am I missing why theres a 2.8GHz speed in this old machine...
[17:17] <chotaz`w> this isnt even #wireshark :v
[17:17] <NoImNotNineVolt> it's an ubuntu package.
[17:18] <NoImNotNineVolt> is this not the place to come harass maintainers? :P
[17:18] <OerHeks> NoImNotNineVolt, is your adapter suitable for monitor mode? https://wiki.wireshark.org/CaptureSetup/WLAN#Linux
[17:18] <NoImNotNineVolt> i'm not capturing, i'm just trying to open an existing capture.
[17:18] <pbx> Shadow}}, you're asking "is memory the problem" but not telling us what's happening.   nonetheless that is a radically small amount of ram
[17:19] <NoImNotNineVolt> i guess let me try a live capture to see if that crashes it too.
[17:19] <NoImNotNineVolt> hm. that works fine...
[17:19] <Shadow}}> pbx: Exactly. But I'm a noob enough to be unaware if RAM is the problem at all, If I buy more RAM cards then will it run faster? The machine is old an Intel Pentium 4 Dimension
[17:20] <fotografisto> how do I change the lock screen theme?
[17:20] <NoImNotNineVolt> and then stopping that and opening a capture from file works fine.
[17:20] <NoImNotNineVolt> okay, well, that's weird. but sufficient as a workaround. thanks? :P
[17:20] <pbx> Shadow}}, you still haven't said what the problem is.  slowness?
[17:21] <pbx> Shadow}}, FWIW 512MB is the recommended minimum, 1GB if you run unity.  https://help.ubuntu.com/community/Installation/SystemRequirements
[17:22] <Shadow}}> pbx: Ah no, Firstly it came to me missing the primary master HDD, So I put a 80 gig one in and set it as Master as the BIOs showed the last config to of used. But... Upon trying to run any type of Booting DVDs. Stops at 0% like its going to take days, But its 2.8GHz?..
[17:23] <Shadow}}> Oh! Thats right. Theres a setting in Bios for the Speed, Channel Mode is Single and only can change the var of eh well from 32,64,128,256. I don't know the default..
[17:24] <Shadow}}> I also don't recall the terms of what I'm speaking of. -_-'
[17:25] <pbx> Shadow}}, sounds like a problem with the optical drive. try a usb key perhaps
[17:26] <Shadow}}> Well heres one I can phrase, Do Monitors (More Advanced or not) take up any System Resources from RAM?
[17:26] <OerHeks> onboard videocards can
[17:27] <Shadow}}> Ah....yeah its using an old one...But.. Dang..Man its IDE and Idk if my AMD Graphics Card will fit in this DeskTop seeing its always been in SATA types..
[17:29] <solsTiCe> hi. When you run th elive cd, you get a screen with unity keyboard shotcut. Now that Ihave instlled ubuntu, how can I display that screen to see the keyboard shortcut again ?
[17:30] <JuJuBee> I have a ubuntu box with gui I want to connect to using something similar to RDP on windows.  Tried KRDC but there was too much lag even on gig network.
[17:30] <Shadow}}> Okay well look, In BIOS. In CPU settings I can view my Memory/System Mem and Channel Mode(Single) then under that is a Variable for the "Aperture" 32-256. Whats Default in old desktops?
[17:32] <Shadow}}> Its also running the HDD in (Acoustics Mode) Bypass. Is Bypass recommended or Performance for ACTUAL overall performance?
[17:34] <Shadow}}> Well can someone point me towards a more lively and more suitable IRC Channel for Computer Questions?
[17:35] <OerHeks> Shadow}}, those Q are more suitable for ##hardware i guess
[17:35] <Shadow}}> OerHeks : ThankYa.
[17:37] <solsTiCe> solsTiCe: hold down Super
[17:37] <solsTiCe> solsTiCe: thanks ;-)
[17:38] <Pici> /70/70
[17:39] <stacks88> if i were to create a .ssh directory on a users account, where the .ssh directory was never there before, for the purpose of creating a authorized_keys , what permissions should i set .ssh to and the authorized_keys file?
[17:39] <stacks88> n/m sorry looks like 700 on .ssh and 600 on auth keys file
[17:42] <sudoritz> dammmm so i think i locked my self out but i think i got a good way to stay cause i had the ssh key (but not i cant sudo su -) i cant remember what i changed cause the history was in root
[17:44] <scatterp> I have ubuntu 11.10 installed to an insanely slow USB drive how can I use the toram option?
[17:44] <stacks88> i have a directory /home/sites/ and in there are a few different sites i run, how can i make it so other users cant see whats in there? i.e they can do cd /home/sites and ls -al .. so i was doing chmod 711 /home/sites/* , is that adequate? I still want apache user to be able to possibly access the dirs or read a file if needed, or can i do chmod 0750 but then would that block apache?
[17:47] <wafflejock> stacks88, it all depends on what users are in what groups and who owns the files
[17:48] <wafflejock> stacks88, you can use groups username, to see what groups a user is in, if you need more granular control check out ACL in ubuntu
[17:50] <drmagoo> I have a strange issue with my system. I'm running dual monitors on a nvidia GTX960-card. The problem occurs after I wake the computer "up", any application that was on the right monitor i hidden somewhere in the background and it takes quite a bit of work to get the back to the foreground on any of the monitors. Anyone have any idea on how to solve this ?
[17:51] <stacks88> ok wafflej0ck thanks
[17:52] <wafflejock> drmagoo, you could try installing ccsm (compiz config settings manager) and check the places plugin that places the windows, might need to manual set the position or something
[17:54] <scatterp> Can any one explain how I can boot from ram?
[17:55] <drmagoo> wafflejock: thank you, will check that out
[17:55] <MKCoin> Hey, I had to restart unity (I'm on 12.04), but now some of my settings don't seem to be propagating. When I change my desktop theme, it changes the theme on my windows, but not on my menu bar at the top. And when I launch KDE applications, they no longer seem to 'hook' to unity and get the right settings, so their fonts are different, set to the program defaults.
[17:55] <MKCoin> Any idea how I can restore the correct behavior? restarting unity, compiz, gnome-settings-daemon, etc. has not helped
[17:56] <rtnb> hey, im trying to mount a boot volume onto another drive so i can edit its fstab, but when i restart the instance boots with this second boot volume as root....
[17:57] <sudoritz> is there a way to gain access or am i locked out from sudo (i was trying to edit PAM stuff and i think i caused my self out
[17:57] <sudoritz> but i had SSH keys saved so i can login to 1 user but not root
[17:58] <scatterp> Sudoritz you have physical access to it?
[17:59] <broman> can anyone help me?? i cant send mails through sendmail in ubuntu... i don't get any errors but the email never shows up!
[17:59] <wafflejock> broman, is this on your home computer or a VPS?
[17:59] <broman> wafflejock, vps
[18:00] <wafflejock> broman, what have you tried to setup in terms of sendmail configuration or nothing yet?
[18:00] <broman> wafflejock, i tried sendmailconfig
[18:00] <broman> wafflejock,  first time i tried with some alterations (not default).. then i tried all default options
[18:01] <andreas--> hello world:-)
[18:02] <broman> wafflejock, im getting this: stat=Deferred: Connection timed out with alt4.gmail-smtp-in.l.google.com.
[18:02] <broman> on /var/log/mail.log...
[18:02] <wafflejock> broman, alright so I've setup postfix before and ssmtp to be able to send mails (postfix for a full email server) http://www.havetheknowhow.com/Configure-the-server/Install-ssmtp.html
[18:03] <broman> wafflejock, complete line: Jun  2 14:00:43 localhost sm-mta[2734]: t52HohEs002732: to=<xxxxx@gmail.com>, ctladdr=<ubuntu@devel.ebeji.com.br> (1000/1001), delay=00:10:00, xdelay=00:10:00, mailer=esmtp, pri=120353, relay=alt4.gmail-smtp-in.l.google.com. [74.125.68.27], dsn=4.0.0, stat=Deferred: Connection timed out with alt4.gmail-smtp-in.l.google.com.
[18:03] <wafflejock> broman, gmail specific settings here http://www.nixtutor.com/linux/send-mail-with-gmail-and-ssmtp/
[18:03] <broman> wafflejock, cant we get this working with simple sendmail?
[18:03] <wafflejock> broman, you may be able to but personally had to use ssmtp to get it working, I didn't put a lot of effort into using sendmailconfig without it though
[18:04] <broman> wafflejock, ok! thanks! i will try this ssmtp
[18:04] <wafflejock> yup gl
[18:04] <broman> wafflejock, i dont want to use the gmail smtp servers!
[18:05] <broman> wafflejock, cant it be done some other way?
[18:06] <wafflejock> broman, well postfix will do everything regarding mail basically it acts as a central mail server with a bunch of parts to help with various tasks like spamassassin and dovecot or courier for handling various protocols like POP and IMAP, but in terms of just getting a server sending e-mails just pushing them out through another smtp server is easier
[18:06] <wafflejock> broman, if you're using Amazon and plan to have the server send a lot of emails you might want to consider using SES
[18:08] <wafflejock> broman, I basically used this guide (somewhat old but still worked) to learn how to configure all the important/relevant pieces but it took like days of going back to it to get it all correct http://flurdy.com/docs/postfix/#config-secure-auth
[18:09] <wafflejock> broman, also once I had to pass PCI-DSS compliance I had to lock down the ciphers the server allows because of the POODLE vulnerability
[18:09] <broman> wafflejock, i need to send like 5mails/daily
[18:10] <wafflejock> okay scratch all that
[18:10] <broman> :)
[18:11] <broman> i need this to be the simple as it can be
[18:11] <scatterp> Wafflejock you already passed it or still need to?
[18:11] <wafflejock> scatterp, waiting for their final review but the automated scan passed
[18:11] <broman> wafflejock, any thoughts?
[18:12] <wafflejock> broman, yeah I'm trying to look at sendmailconfig to see if there's some simple way to just get it sending, here so far https://holarails.wordpress.com/2013/11/17/configure-sendmail-in-ubuntu-12-04-and-make-it-fast/
[18:12] <broman> wafflejock, been there, done that ;0
[18:12] <broman> wafflejock, been there, done that ;)
[18:12] <scatterp> Wafflejock if it helps you at all I'm partnered with a company who can certify you
[18:13] <wafflejock> scatterp, ah actually just checked and it passed, thx we work with a processor called BluePay and do web dev stuff for their clients so they have a "free pass" for us for compliance for now
[18:13] <scatterp> Pci-dss is weak in my opinion anyway
[18:13] <wafflejock> scatterp, it's just basic compliance for us
[18:14] <broman> anybody else can help me with sendmail??
[18:14] <wafflejock> scatterp, yeah there are higher levels for physical security but using AWS and they have PCI compliance as well, mostly just a CYA thing
[18:14] <scatterp> Wafflejock yes its best just to get a free pass that would have been my advice of course then do proper security
[18:15] <wafflejock> scatterp, yeah use lynis to help with auditing the servers as well
[18:16] <wafflejock> scatterp, and I try to just generally be security minded, didn't realize I had those possible POODLE vulnerabilities but not something of huge concern to me (was just on our e-mails which aren't of extremely private nature anyhow)
[18:16] <scatterp> Waffle in Russia they use typewriters :)
[18:20] <scatterp> Anyone know how "to ram" works?
[18:20] <wafflejock> scatterp, heh yeah this automated scan was really pretty useful, only problem was I didn't know what to disable in postfix based on the way it spelled out the cipher it didn't like cause it's not a 1:1 correspondence with what needed to be in the postfix config
[18:20] <wafflejock> scatterp, tried searching on the ramdisk business but didn't find anything about your particular scenario
[18:21] <scatterp> yeah some frameworks don't fully explain
[18:21] <scatterp> Is postfix up to date?
[18:22] <wafflejock> scatterp, mostly... I mean it has a lot of custom configuration you need to do to fix modern vulnerabilities but it's still a very capable stack of software
[18:23] <wafflejock> scatterp, I haven't gone so far as to add any sort of GUI interface though I just use phpmyadmin to edit a mysql database that it's setup to use for looking up emails and hashes and such
[18:24] <scatterp> Anyway just enable cloud flare and that's fixed
[18:25] <scatterp> Or disabled ssl3 support in the email server config
[18:25] <wafflejock> scatterp, right that's the main one just disable ssl2 and ssl3 and you're mostly good
[18:25] <scatterp> Its a mitm attack so not a Hugh threat
[18:26] <scatterp> Can't you just put it on cloud flare ?
[18:26] <Pici> /70/70
[18:27] <wafflejock> scatterp, not sure how that helps?
[18:27] <scatterp> That will give you a whole bunch of additional security protections faster load times and improve serps
[18:27] <scatterp> and block the exploit automatically
[18:27] <scatterp> And block some future exploits also
[18:27] <wafflejock> scatterp, the stuff on their site doesn't seem relevant to the mail server security issues though
[18:28] <wafflejock> scatterp, I mean I guess it's less load on my instance
[18:28] <scatterp> Well its a deep technical thing won't be on front page but call them ask if they block poodle if you like
[18:29] <scatterp> There service includes a ids thing
[18:29] <wafflejock> scatterp, fair enough yeah I'll keep them in mind, don't think it'd be worth jumping ship just yet but good to be aware of other options
[18:29] <wafflejock> scatterp, thx
[18:30] <scatterp> Well it should also increase sales
[18:30] <joshh20> Whenever I reload my network interfaces with 'ifdown -a --ignore-errors; ifup -a --ignore-errors'
[18:30] <joshh20> I get spammed with 'RTNETLINK answers: File exists'
[18:31] <scatterp> There may be another option also from a similar cdn
[18:31] <scatterp> Anyway got to take a work call bbl
[18:39] <vindicator> Is anyone familiar withe SecureBoot when it comes to viewing keys via keyctl?
[18:39] <vindicator> Specifically sudo keyctl list %:.system_keyring
[18:40] <vindicator> I'm expecting output like the article at https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/System_Administrators_Guide/sect-signing-kernel-modules-for-secure-boot.html
[18:46] <sudoritz> anyone have any good irc chat clients for macs
[18:46] <sudoritz> im using webchat but looking for app or somethign someone recommends
[18:47] <xangua>  !irc
[18:50] <al2o3-cr> sudoritz: weechat's nice if you like a curses based client
[18:52] <griffin_> hi i m looking for help to install octopussy on ubuntu 14.04, so far unsuccessful !
[18:52] <griffin_> if anyone can help, please join the channel octopussy thanks in advance
[18:52] <griffin_> ;)
[18:53] <compdoc> I think Ive heard of it - but maybe that was just a James Bond film
[18:54] <wafflejock> compdoc, it is, also this http://www.octopussy.pm/
[18:56] <chrae> I'm getting weirded out by my printer.  The printer goes through a "refresh" routine, where it spins something for a second or so every time I disconnect my android phone from my computer's USB.  The printer is wireless, and my phone's wireless is off, bluetooth off so how is there a correlation?
[18:57] <chrae> /var/log/syslog has no clues for me
[18:57] <kokut> Anyone knows how to disable chrome from trying to validate SSL certificates? this fraking annoying crap is wasting my time so much
[18:57] <Guest71415> hi !! can you tell me informations about security network what can i use to my home connection ?
[19:00] <chrae> I guess I dont get how unplugging a USB device can affect my wireless printer
[19:02] <OerHeks> chrae, sounds like your android was connected to the printerservice
[19:04] <kokut> Anyone knows how to disable SSL in chrome??
[19:04] <blackflow> kokut: what do you mean disable? you can't just disable SSL
[19:05] <kokut> blackflow: why?
[19:05] <chrae> OerHeks, my android is set to "Charge only" with usb debugging enabled, I'm gonna switch usb debug off and see what happens
[19:05] <kokut> blackflow that crap is wasting my time so much i wanna kill someone already
[19:05] <blackflow> kokut: because if the server you connect to requires it, there's nothing the browser can do
[19:05] <blackflow> kokut: what problems are you having?
[19:06] <Nikesh> I have a custom Ubuntu that was modified for Chromebook - It seems to lack iptables_nat which is blocking me from getting Docker to run - Would it be possible to just use something like Vagrant to get a standard version of Ubuntu running onto which I could install Docker?
[19:06] <kokut>  blackflow i'm trying to connect to a website from work and i cant because of the SSL crap
[19:07] <blackflow> kokut: what error do you have?
[19:07] <kokut> blackflow: can you just tell me how to remove SSL freaking crap man
[19:07] <blackflow> kokut: you can't remove ssl. afaik you _can_ store an exception if the cert is invalid/expired, not sure how in chrome, though, it should give you options automatically.
[19:08] <kokut> blackflow: in firefox it will only say "GET ME OUT OF HERE" lol
[19:08] <kokut> like i'm freaking worried about my security or something freaking crap
[19:08] <blackflow> kokut: there's also a button to store an exception in FF
[19:08] <kokut> blackflow: what button
[19:09] <chrae> OerHeks, usb set to "Charge only" and usb debugging is off, yet it's still triggering the printer
[19:09] <blackflow> kokut: http://en.flossmanuals.net/circumvention-tools/_all/_booki/circumvention-tools/static/CircumventionTools-UsingPsiphon2-psiphon2_firefox_ssl_1_blured-en.png
[19:09] <blackflow> something like that "Or you can add an exception" link
[19:09] <kokut> blackflow: w7.seg-social.es uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown.  (Error code: sec_error_unknown_issuer) !!
[19:09] <blackflow> kokut: more modern example: http://cdn5.howtogeek.com/wp-content/uploads/2012/03/image25.png
[19:10] <lilmoe> hi, how can i fix the screen flickering
[19:10] <blackflow> kokut: "Add exception" button down in the "I understand the risks" section.
[19:10] <kokut> blackflow: in FF there is no add exception button man
[19:10] <kokut> they removed it because they are so freaking smart
[19:10] <blackflow> I doubt that
[19:11] <kokut> blackflow: well, dont, they are too smart
[19:11] <blackflow> kokut: click the "I understand the risks" headline
[19:11] <blackflow> the button appears
[19:11] <kokut> blackflow: ill show u a ss
[19:11] <kokut> blackflow: http://i.imgur.com/W1W6FeL.png
[19:11] <kokut> tell me where to click
[19:11] <lilmoe> please.
[19:12] <blackflow> kokut: can you click the padlock in the address bar?
[19:12] <kokut> yea blackflow it says the connection is secure
[19:13] <blackflow> kokut: what FF version is that? I'm at that site you linked and I have the button to add an exception
[19:13] <codehotter> if I use my touchpad, letters appear on my screen instead. I have some cryptic messages about syncing in dmesg
[19:13] <codehotter> what is causing this
[19:13] <kokut> blackflow: are u kidding
[19:13] <blackflow> kokut: nope.
[19:14] <kokut> blackflow: 38.0
[19:14] <blackflow> kokut: also, the link in your screenshot opens just fine for me
[19:14] <blackflow> 38 also here
[19:14] <blackflow> you could try dropping your FF cache
[19:14] <kokut> just tell me where to click
[19:14] <blackflow> I have no idea why your FF has no button to add an exception.
[19:14] <drmagoo> kokut: try to disable the ghostery-addon, I hade the same issue before I uninstalled that addon
[19:15] <blackflow> I have Ghostery enabled and I see that site just fine.
[19:15] <drmagoo> blackflow: ok, =)
[19:15] <blackflow> I'm willing to bet there's another toolbar or some addon for FF that breaks that.
[19:16] <blackflow> kokut: How about Chrome, that you asked first? It should have a "Proceed anyway" button
[19:16] <kokut> blackflow: still the same
[19:16] <blackflow> kokut: I'm looking at it through Chromium and works just fine. The site linked in that screenshot.
[19:16] <kokut> blackflow: in chrome it doesnt even give a warning just a broken website
[19:17] <no_gravity> Hello! Is it possible to map keys so they act as ctrl when they are hold? so for example c+p becomes CTRL-p?
[19:17] <blackflow> kokut: there's something seriously broken there for you and I don't know what.
[19:18] <blackflow> kokut: I'm sorry I can't help you more than that. But your orig question, you can't disable SSL. You can try the site with http:// instead of https:// prefix, but that might not work, if they redir to ssl.
[19:18] <kokut> blackflow: no it doesnt work
[19:18] <kokut> blackflow: man just help me i cant waste more time with this
[19:18] <blackflow> kokut: I suggest you to start FF in safe mode and disable all the addons: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
[19:19] <blackflow> kokut: I don't know how else to help, sorry.
[19:19] <nikola_tesla_> hi guys . any one can help me about robotic operation system ?
[19:19] <nikola_tesla_> i work on ros (hector slam)
[19:20] <kokut> blackflow: same :\
[19:20] <nikola_tesla_> same ?
[19:21] <kokut> nikola_tesla_: yep
[19:22] <blackflow> kokut: which Ubuntu is that, btw?
[19:23] <pnwise> Hey anyone know image for Rpi under 2gb?
[19:24] <embik> pnwise: there are images available on the very official raspberry pi website ...
[19:24] <kokut> blackflow: 15.04
[19:24] <pnwise> Yeah I know. If you read carefully again I asked if someone knows something bellow 2gb
[19:24] <blackflow> kokut: all updated, latest version of stuff?
[19:25] <embik> pwnise: the Ubuntu MATE raspberry pi image for example is 903 MB big
[19:25] <solsTiCe> hi .I try to use the tools > check integrity option of brasero for an already burnt dvd. but I got an error about not having the right perm to do that. when I look at /dev/sr0 I got all the needed right, even write perm. is it because it's a sata drive connected through usb ?
[19:25] <kokut> blackflow: yea
[19:25] <embik> pwnise: Raspbian is 990 MB as well
[19:25] <blackflow> kokut: well, I don't know if that'll help, but you could try reinstall the ca-certificates package
[19:26] <corvelle> 3 blondes, 12 blacks....what'll happen?
[19:27] <kokut> corvelle: evolution
[19:27] <corvelle> lol what
[19:27] <blackflow> are the blondes MMA fighters?
[19:28] <ioria> kokut : are you running chrome in vivid ?
[19:28] <raub> blackflow: they are from the Amazon planet and want some snu snu
[19:28] <kokut> ioria: 15.04 i dont know the codename
 They are not - that is compressed size, the mate is around 3.2 GB if remember correctly
[19:29] <ioria> !info chrome-browser
[19:29] <ioria> !info chromium-browser
[19:29] <ioria> kokut : maybe you are running  chromium ?
[19:29] <embik> pnwise: well I derped, sorry
[19:29] <blackflow> kokut: did you try reinstalling the ca-certificates package?
[19:30] <kokut> ioria: i'm on chrome as far as i know
[19:30] <ioria> kokut : how did you install it ?
[19:30] <kokut> blackflow: nope
[19:30] <blackflow> kokut: well, try it?
[19:30] <kokut> i think the problem is that SSL 3.0 comes enabled by default and you cant bypass it unless you do something in the chrome configuration
[19:31] <blackflow> kokut: naah.
 Thanks, sorry if I sounded like douche, writing in English is not my stron side
[19:31] <blackflow> kokut: it doesn't work that way.
[19:32] <embik> pnwise: no worries, I did my best to sound like a douch as well
[19:32] <embik> *douche
[19:32] <kokut> blackflow: i dont know what to do anymore man
[19:33] <blackflow> kokut: did you try reinstalling ca-certificates?
[19:33] <kokut> blackflow: http://i.imgur.com/ExI8tnr.png thats chrome
[19:34] <blackflow> kokut: did you try reinstalling ca-certificates?
[19:34] <kokut> blackflow: what the ? i just reloaded the page and now its showing the website ... ?
[19:34] <kokut> lolwut
[19:35] <kokut> its because i requested the website with a wrong GET value
[19:37] <kokut> blackflow: anyways, it doesnt work because i need to do the normal request
[19:37] <blackflow> kokut: did you try reinstalling ca-certificates?
[19:38] <c0mrad3> is this common to get with sudo ?? https://www.irccloud.com/pastebin/ohJZCGOV/
[19:39] <kokut> blackflow: i dont even know how to do that
[19:39] <EriC^^> c0mrad3: sudo doesn't cross the redirection
[19:39] <R0b0t1> Hi, I found http://ubuntuforums.org/showthread.php?t=2153270 ... I'm unable to figure out what the guy did
[19:39] <EriC^^> c0mrad3: echo "200" | sudo tee /sys/.........
[19:39] <R0b0t1> I'm not using ubuntu by the way, but I suspect I'm missing a driver that ubuntu includes and I'd like to find it.
[19:40] <c0mrad3> well am not a scripting expert :( hope to learn some day
[19:41] <c0mrad3> how to fix this error when installing
[19:41] <c0mrad3> https://www.irccloud.com/pastebin/DGfHLLQW/
[19:41] <chrae> Still trying to figure out why unplugging my phone from USB is triggering my wireless printer to "refresh".  I turned wireless/bluetooth off, "charge only".  I removed the printer from the printer list, rebooted, killed all cups processes, made sure netstat -a had no connections to the printer, yet it is STILL doing it
[19:42] <EriC^^> c0mrad3: neither am i, hope you reach your goal though
[19:42] <blackflow> kokut: open the terminal and type 'sudo apt-get install --reinstall ca-certificates'. Sorry I don't know how to do it through the user interface, I'm primarily a server guy.
[19:43] <EriC^^> c0mrad3: you can try installing the ones it's whining about, and see why it won't install them
[19:44] <EriC^^> c0mrad3: sudo apt-get -f install might help
[19:44] <MonkeyDust> c0mrad3  methinks you have been mixing software sources... pastebin the output of   sudo apt-get update
[19:45] <c0mrad3> MonkeyDust: Yes I have mixed the software sources but now I am using only new one
[19:46] <JustMozzy> hey everyone. I have an old hard disk which I had my home folder encrypted by ubuntu. now I am on a new system and need to access my files. how can I decrypt?
[19:46] <c0mrad3> EriC^^: as per ur suggestion I tried installing cheese here is the output
[19:46] <waspinator> how do you load a model inside another model in cake2?
[19:46] <c0mrad3> https://www.irccloud.com/pastebin/7a4SJK6n/
[19:48] <MonkeyDust> waspinator  what's cake2?
[19:49] <c0mrad3> MonkeyDust this will help you to fix my problem  https://www.irccloud.com/pastebin/PAYFfPRH/
[19:50] <MonkeyDust> c0mrad3  those are all debian sources... what's the output of   cat /etc/issue
[19:51] <c0mrad3> MonkeyDust: Debian GNU/Linux 8 \n \l
[19:51] <MonkeyDust> c0mrad3  then why are you here? ask help in the dbian channel
[19:51] <MonkeyDust> debian*
[19:52] <c0mrad3> well they are not helping me :( MonkeyDust
[19:52] <MonkeyDust> c0mrad3  and we are unable to... no wonder your issue doenst get solved
[19:53] <blackflow> lol some people... Ubuntu != Debian.
[19:53] <MonkeyDust> c0mrad3  maybe you should be more patient in the debian channel
[19:53] <ioria> c0mrad3, try to regenerate sources.list http://debgen.simplylinux.ch/
[19:56] <c0mrad3> ioria: well that too old one i guess it's saying jessie as testing
[19:57] <ioria> c0mrad3, stable from 25 april ?
[19:57] <boughani> i would install kali tools in my backbox
[19:57] <ioria> c0mrad3, maybe it does not involve sources.list
[19:57] <EriC^^> c0mrad3: you were using older sources?
[19:57] <Pici> c0mrad3, ioria, EriC^^: can you please move this to #debian ?
[19:58] <ioria> sorry
[19:58] <boughani> I don't have older source
[19:58] <c0mrad3> EriC^^: I have old source list I will try to replace them
[19:58] <boughani> can you giveme source
[19:59] <MonkeyDust> c0mrad3  ask EriC^^ and ioria to follow you to #debian
[19:59] <boughani> giveme lien to  add source iste help me
[20:00] <boughani> good by friends
[20:14] <alfatau> hello all. I'm trying to understand if the usb-storage driver is using UAS or BOT. can you help me?
[20:21] <MonkeyDust> alfatau  start here http://electronicdesign.com/embedded/whats-difference-between-usb-uasp-and-bot
[20:22] <alfatau> MonkeyDust: thanks
[20:22] <Jordan_U> alfatau: What version of Ubuntu are you using?
[20:23] <alfatau> 14.10
[20:23] <alfatau> Jordan_U: 14.10
[20:25] <alfatau> Jordan_U, MonkeyDust: the idea is to look at dmesg for specific uas strings in order to understand if it's active or not. the main problem is the queue_depth of the disk is 1 when connected to usb3, and 31 when connected to eSata (same enclosure).
[20:28] <alfatau> Jordan_U, MonkeyDust: the performance are really different: nearly 3GT/sec for eSata3.0 but less than 1GT/sec for usb3. The declared performance is 5GT/s, but the usb hub is an expresscard connected to pcie2.0 1 lane (i.e. 4GT/s). Finally I'm expecting at least the same speed of the eSata3.0 interface.
[20:34] <linuxuz3r> can someone help i dont have sound
[20:34] <linuxuz3r> i already ran the command: alsa reload
[20:34] <linuxuz3r> but i still dont hear any output
[20:35] <linuxuz3r> guys
[20:35] <nomic> alsamixer
[20:36] <nomic> did you have sound
[20:36] <linuxuz3r> yes
[20:37] <ubuntu-mate> hi
[20:38] <nomic> well what did you do t stop it
[20:38] <nomic> alsamixer gives you all sound controls
[20:38] <nomic> sudo apt-get alsamixer
[20:39] <linuxuz3r> i just rebooted my system
[20:39] <zykotick9> nomic: fyi, alsamixer isn't a package, it's included in alsa-utils
[20:39] <nomic> well help him
[20:39] <nomic> check cables ..
[20:40] <ubuntu-mate> russians here?
[20:40] <luny> should 7zip be able to open passworded archives created on windows 7zip?
[20:40] <MonkeyDust> !ru
[20:40] <Hobbyboy> on my Ubuntu server, how would I specify an ipv6 address as the default ipv6?
[20:40] <cortexman> how do i do this in vivid? sudo add-apt-repository ppa:mkusb/ppa
[20:41] <cortexman> nm
[20:41] <Pici> cortexman: The same way you'd do tit on any release
[20:41] <cortexman> no that is not true
[20:41] <cortexman> the package name changed
[20:41] <cortexman> nice try though.
[20:42] <Pici> cortexman: Which package name?
[20:42] <cortexman> you tell me
[20:43] <Pici> cortexman: I just looked at that PPA, the package names mkusb and mkusb-nox seem to be consistant across every release, up to those in wily.
[20:44] <cortexman> add-apt-repository isn't installed by default
[20:44] <dielson> lol shouldn't add-apt-repository download the correct distribution? The only difference between releases is the directory they're in
[20:44] <Pici> I'm just curious what I may have missed, since I'm not seeing what you mean.
[20:44] <cortexman> at least, not in my case
[20:44] <Pici> cortexman: I see. Okay.
[20:44] <mcphail> apt-add-respository
[20:45] <cortexman> that's nuts
[20:45] <mcphail> getting the command name correct is half the battle
[20:45] <cortexman> now i have both apt-add-repository and add-apt-repository
[20:45] <cortexman> no, you are wrong.
[20:45] <k1l> cortexman: what ubuntu is it? was it upgraded to that version?
[20:45] <cortexman> i upgraded it precise -> vivid
[20:45] <dielson> Indeed, there's both commands
[20:46] <k1l> cortexman: iirc that should be standard since latest ubuntus. but "back then" it was not stnadard so maybe its just due to the older first install
[20:46] <Pici> apt-add-repository and add-apt-repository are the same thing. One is a symlink to the other.
[20:46] <priyanshu> hello guys
[20:46] <mcphail> aah :)
[20:46] <k1l> software-properties-common should be the package needed
[20:46] <mcphail> cortexman: I have learned something new from this conversation :)
[20:46] <cortexman> haha. not that useful tho:)
[20:47] <mcphail> cortexman: when you add a PPA, you are reliant on the PPA builders making a build for your version. If they haven't made the build, you are out of luck. PPAs can't be supported here
[20:49] <cortexman> huh?
[20:49] <cortexman> i didn't ask for that
[20:50] <mcphail> then you should be more clear
[20:50] <mcphail> 20:40 < cortexman> how do i do this in vivid? sudo add-apt-repository ppa:mkusb/ppa
[20:50] <Pici> Indeed.  I was confused over whether the original question was about add-apt-repository or about the ppa itself.
[20:50] <Pici> it was about the former.
[20:50] <zykotick9> cortexman: seems to me you _are_ asking for support from #ubuntu for a PPA issue...  see "/msg ubottu ppa" for the unsupported warning.
[20:50] <Pici> they arent.
[20:50] <cortexman> huh?
[20:51] <Pici> cortexman: forget it, everyone is confused ;)
[20:51] <cortexman> man, you guys are hog-wild when it comes to trying to identify rule breakers
[20:51] <cortexman> peace
[20:52] <zykotick9> in my opinion, if you are using a PPA, you're doin' something wrong... but some may disagree ;)
[20:55] <Grimsley> zykotick9, do you prefer source > .configure > make > make install or something else?
[20:56] <zykotick9> Grimsley: no.  i just don't see much need to go outside the main distro repos <- BUT, i value stability very highly... certainly others will have different priorities...
[20:56] <k1l> ppas tend to be the quick solution for the "need" for the latest and greatest. but in most cases there is not a real need.
[20:57] <Grimsley> well ppa's aren't ideal but they offer users a more 'rolling' or 'bleeding edge' experience when it takes repo's a time to catch up to releases
[20:57] <zykotick9> Grimsley: fyi, for manual building check out, "checkinstall" <- makes apt aware of what your installing!  makes removing a lot easier!
[20:58] <Grimsley> good to know.
[21:00] <zykotick9> k1l: "shiney new syndrom" is widespread, and _seems_ contagious ;)
[21:01] <k1l> Grimsley: the issue with ppas is, that you are in need of a proper depency setup made by the ppa maintainer. but not all maintainers are aware of that. so most "i broke my package system" that show up here are due to "not so good" ppas.
[21:02] <Grimsley> Well it's not bad when an exploit has been found but generally speaking more repo's will have the fix in a matter of hours
[21:02] <gnutgnut> Running Ubuntu 14.04 on a laptop. So when I run ping -a.... I can't hear the sound(its called the terminal bell i think). Why?
[21:03] <k1l> Grimsley: the original ubuntu packages get security and heavy bugfixes. see ubuntu.com/usn for the CVEs
[21:03] <bekks> gnutgnut: Because it is a visual bell.
[21:03] <Grimsley> k1l, I try to avoid PPA's myself, everything I've every really needed has been found in the repo. except on the debain side of things avidemux and ffmeg for whatever reason are not always there
[21:03] <gnutgnut> visual bell? I thought the -a option was for audio ping?
[21:04] <gnutgnut> bekks: ^
[21:04] <Grimsley> use to love doing a ping with the sonar xscreensaver using that 'ping' sound
[21:04] <k1l> Grimsley: debian (and so ubuntu) did go with avconv instead of the ffmpeg the last years. but they now want to ship avconv and ffmpeg.
[21:05] <Grimsley> k1l: yeah I recall hearing about that. some of the applications I use still rely on ffmpeg so I have to go to source when I need to
[21:05] <gnutgnut> bekks ??
[21:05] <bekks> gnutgnut: I havent seen, err heared, an audio ping for almost two decades. :)
[21:06] <gnutgnut> bekks: http://askubuntu.com/questions/40171/terminal-bell-without-a-pc-speaker
[21:06] <bekks> gnutgnut: http://askubuntu.com/questions/15963/why-cant-i-hear-audible-pings
[21:06] <bekks> gnutgnut: If you dont have a pc speaker, the solution is provided in your link.
[21:07] <gnutgnut> bekks: I just wanted to cross check and see why its disabled by default.
[21:07] <zykotick9> k1l: interesting, i wasn't aware of the ffmpeg/libav-tools change, but sure enough, debian's sid does have both.
[21:09] <chris123123>  /server irc.criten.net
[21:13] <rebs> which chmod number sets files executable by me and my group
[21:14] <Seveas> rebs: ug+x
[21:14] <levo> i have installed --> apt-get install dict-freedict-eng-fra   dictionary but i don't know how i can use it. i have goldendict installed. it couldn't detect that automatically, and i couldn't find a path to the installed dictionary
[21:14] <rebs> ty Seveas !
[21:19] <pavlos> levo, if you write something using Libre Office Writer, it should underline in red the words that cannot be found in the dictionary, right click and select the dictionary you want.
[21:21] <imjacobclark> Whats the best way to tune Linux for a load testing application, max file descriptors, max threads per process and other items need to be set to very high values, how best to go about that?
[21:21] <R13ose> How come my brother printer is saying process - not connected? and when I try to find the printer, it asks for me to login into the network which I don't remember the username or password for.
[21:24] <MKCoin> Can someone tell me which file mimeopen uses to determine default applications?
[21:25] <leretourdenemo> hello
[21:26] <charlesjay> hey
[21:27] <flexus> R13ose, how is your printer connected? usb?
[21:28] <brainwash_> MKCoin: http://standards.freedesktop.org/mime-apps-spec/mime-apps-spec-1.0.html
[21:28] <charlesjay> who is online here
[21:28] <charlesjay> ?
[21:28] <brainwash_> !ask
[21:28] <R13ose> flexus: their the internet modem that comes with the internet as that has a hub in it.
[21:29] <flexus> R13ose, an usb hub you mean?
[21:29] <R13ose> flexus: nope normal network hub.
[21:29] <flexus> so its ethernet and your printer gets connected to your modem
[21:30] <bekks> R13ose: And technically, the device you call modem provides DHCP addresses to the devices connected to the hub (which is a switch in fact)?
[21:30] <R13ose> yep socket:// with ip address
[21:32] <charlesjay> my ubuntu 14.10 cannot connect to a wifi network please help
[21:32] <engammalsko> i wanna send a mail from my computer to my gmail account using postfix, is this possible without a domain name?
[21:33] <R13ose> Any ideas on how to fix this?  If not, I have to go anyways
[21:35] <MKCoin> brainwash_ : xdg-settings is throwing me an "unknown desktop environment" error after I had to restart unity, do you know which of them it would go to? When I echo $XDG_CONFIG_DIRS it's not giving me anything either
[21:35] <flexus> R13ose, try out direct connection with your host first, then with the router
[21:36] <brainwash_> MKCoin: sadly, no
[21:37] <MKCoin> Hm, I see. Just trying to fix my default browser; normally xdg-open sends its input to gnome-open, which works fine, but since it can't see my desktop now it's using a different default that I seem unable to change
[21:39] <R13ose> flexus: thanks, I will try later
[21:40] <brainwash_> MKCoin: did you try to fix the actual problem (desktop not recognized anymore)?
[21:41] <MKCoin> brainwash_ Yeah I restarted unity, compiz, gnome-settings-daemon... hm, what's the name of the xfce settings daemon? I haven't killed that yet :D
[21:43] <brainwash_> MKCoin: xfsettingsd. but why would it run?
[21:44] <MKCoin> brainwash_ : It's not running it seems. I dunno what else to try short of restarting, which is what I'm trying to avoid
[21:46] <brainwash_> MKCoin: well, you could strace xdg-open/gnome-open and see which files are being read
[21:54] <MKCoin> Aha, it was calling /usr/bin/x-www-browser which points to the wrong browser
[21:54] <in_deep_thought> I can ssh into my comptuer. So I know its connected to the network. However it cannot fetch external stuff like google.com. So I believe it is using the wrong name servers. Where would the file be so that I can change that?
[21:55] <EriC^^> in_deep_thought: can you ping 8.8.8.8?
[21:55] <in_deep_thought> EriC^^: yeah
[21:55] <EriC^^> check /etc/resolv.conf i guess
[21:56] <in_deep_thought> ah nothings inside of it
[21:56] <in_deep_thought> this is where I edit stuff right?
[21:56] <in_deep_thought> like adding the dns server of my network etc
[21:56] <MKCoin> Ok thanks brainwash_, I was able to fix by changing x-www-browser via update-alternatives.
[21:56] <EriC^^> in_deep_thought: this is mine http://paste.ubuntu.com/11529265/
[21:56] <histo> in_deep_thought: Not anymore
[21:57] <zykotick9> EriC^^: in_deep_thought /etc/resolv.conf is mainly superseeded by /etc/network/interfaces <- i believe...
[21:57] <brainwash_> MKCoin: awesome :)
[21:57] <histo> in_deep_thought: how are you configuring your network connection?
[21:57] <Ranieri_> How does an OS find out what hardware your computer has?
[21:58] <in_deep_thought> EriC^^: that worked thanks!
[21:58] <in_deep_thought> well my nameservers are different, but thats the file
[21:58] <EriC^^> in_deep_thought: it's supposed to be generated by itself though i think
[21:58] <zykotick9> in_deep_thought: fyi, when you reboot, it'll disappear.
[21:58] <JeanYang> does Ubuntu use AppArmor or SELinux?
[21:58] <histo> in_deep_thought: until you reboot
[21:58] <in_deep_thought> zykotick9: yeah thats what happened last time
[21:58] <in_deep_thought> how do I prevent that?
[21:59] <histo> in_deep_thought: How are you configuring your network connection?
[21:59] <zykotick9> in_deep_thought: don't edit resolv.conf <- as it says!!!
[21:59] <in_deep_thought> zykotick9: but that makes it work…
[21:59] <zykotick9> temporarily...
[22:00] <EriC^^> in_deep_thought: i'm reading man 8 resolvconf
[22:00] <EriC^^> it says how it's generated
[22:00] <in_deep_thought> histo: there is a domain name that is the network - carp.mct.io. then the nameserver that it uses
[22:00] <in_deep_thought> nameserver checks a few places first for each name and then if that fails, I also have 8.8.8.8 and 8.8.4.4
[22:02] <Ranieri_> SchrodingersScat: Hey Schro
[22:03] <histo> in_deep_thought: I meant are you using network-manager to configure the interface?
[22:03] <in_deep_thought> no
[22:03] <histo> in_deep_thought: then HOW?
[22:03] <in_deep_thought> I just edit that file
[22:04]  * histo slams keyboard
[22:04] <in_deep_thought> this is my work network so someone else set up the DNS server
[22:04] <in_deep_thought> but Im connecting to it
[22:04] <histo> in_deep_thought: Is this a full desktop machine?
[22:04] <in_deep_thought> and hopefully to the outside world
[22:04] <in_deep_thought> histo: yeah
[22:04] <histo> in_deep_thought: on the little network icon you can configure different dns servers
[22:05] <in_deep_thought> its tinywm
[22:05] <in_deep_thought> doesn’t have a gui
[22:05] <histo> in_deep_thought: if you are hard configuring your network connection via interfaces you specify nameservers there.
[22:05] <histo> EriC^^: ^^^
[22:05] <brainwash_> JeanYang: apparmor
[22:05] <histo> in_deep_thought: whats in /etc/network/interfaces
[22:06] <in_deep_thought> https://bpaste.net/show/db566de568ba
[22:06] <brainwash_> JeanYang: switching to selinux should be possible, but the packages are not that well maintained I think
[22:06] <JeanYang> brainwash_: thank you
[22:07] <histo> in_deep_thought: yeah you need to add nameservers to the eth0 section if you want to change them
[22:07] <in_deep_thought> histo: under auto eth0?
[22:09] <histo> in_deep_thought: yes at the bottom of that section you can add a line dns-namerserver 8.8.8.8    or whatever nameserver you want to use. Then restart networking
[22:32] <west536457640> ubuntu 14.04 cannot play iphone filmed mov files on laptop - is there a fix for this?
[22:33] <brainwash_> west536457640: try with VLC
[22:33] <histo> !codec | west536457640
[22:36] <iE0Tkjd> I'm looking for a good customizable linxu distro, right now i'm runnign lubuntu,a nd its not customizable at all. Any ideas?
[22:36] <west536457640> vlc does not play it, looking at the links now
[22:41] <bastones> iE0Tkjd: Perhaps look at Ubuntu MATE.
[22:47] <knocktwice> Does xfce support multi-desktop (not multi-monitor, but old-skool multiple desktops)
[22:48] <histo> knocktwice: yes
[22:48] <knocktwice> great, time to try it out :)
[22:49] <histo> knocktwice: http://imgur.com/CF66Qt7  see the little desktop switcher
[23:10] <neonixcoder> Good day team..
[23:12] <pavlos> west536457640, I got a sample .mov file and was able to play it in 14.04 with the default movie player
[23:12] <pavlos> west536457640, the last from https://support.apple.com/en-us/HT201549
[23:19] <dtigue> west536457640, this may be a stupid question, but did you check to make sure the .mov file in question works in windows? it may have become corrupt during the transfer or the file on your phone could be corrupt, i've had that issue before with .mov files
[23:22] <neonixcoder> I am working on upgrading 10.04 to 14.04 as 10.04 LTS got expired. In that process I am doing an 10.04 to 12.04 upgrade now and upgrade is not happening well..
[23:22] <semitones> My google-fu is failing. What is it called when ubuntu dash can search for apps that haven't yet been installed, and how can I enable that?
[23:22] <EriC^> !eolupgrades | neonixcoder did you check here
[23:23] <neonixcoder> Always it says python2.7 is missing and if I reboot the machine I am getting kernel panic..
[23:23] <dtigue> semitones, you'll have to enable the filters in the top left of the dash
[23:23] <dtigue> semitones, i think you have to be in the apps scope
[23:23] <EriC^> neonixcoder: try to boot from a live usb and see what's happening
[23:23] <semitones> Alright, I'm investigating
[23:23] <neonixcoder> EriC^: I dont have option to have live CD?
[23:24] <neonixcoder> what is the other option?
[23:24] <EriC^> neonixcoder: did the upgrade complete? is it 12.04 right now?
[23:24] <semitones> dtigue, is it possible to add addtional sources to dash?
[23:24] <dtigue> semitones, you can add more scopes
[23:24] <EriC^> neonixcoder: why can you not use a live usb?
[23:25] <neonixcoder> EriC^: Yes, but it says some errors occurred. When I tried to fix it with couple of commands like apt-get update, apt-get upgrade, apt-get -f install etc, I couldn't fix them..
[23:26] <dtigue> semitones, err, i think they call em lenses and not scopes anymore, I can't keep up with the unity terminology
[23:26] <Ben64> neonixcoder: pastebin the errors
[23:26] <neonixcoder> I have 150machines spread in remote locations..
[23:27] <neonixcoder> Ben64: Give me 2 mins..
[23:28] <neonixcoder> Ben64:http://pastebin.com/32spgMzR
[23:30] <dtigue> neonixcoder, does it not fix those errors if you just install python2.7 ?
[23:31] <neonixcoder> dtigue: I cant install python2.7 thats where I got struck up..
[23:31] <neonixcoder> I tried apt-get update, apt-get upgrade then apt-get install python..
[23:32] <neonixcoder> Even tried apt-get install python2.7 incase if I miss something
[23:32] <neonixcoder> I tried to compile python2.7.5 and that too did not solve my issue :(
[23:32] <neonixcoder> I am sure, I am missing something here..
[23:32] <dtigue> apt-get dist-upgrade?
[23:32] <neonixcoder> dtigue: Did that as well..
[23:32] <neonixcoder> no use..
[23:32] <rektkeys> clear
[23:33] <rektkeys> woops xD
[23:33] <neonixcoder> ketkeys: I did apt-get clear as well..
[23:33] <rektkeys> those feels
[23:34] <semitones> WHy is there no dash lens to search the ubuntu software center?
[23:34] <Ben64> neonixcoder: sudo apt-get install python2.7-minimal
[23:35] <neonixcoder> Ben64: I think, system tried it and did not succeed. Let me try it once again..
[23:35] <Ben64> whatever happens, pastebin it
[23:36] <neonixcoder> sure..
[23:36] <neonixcoder> Ben64: Will do one thing..
[23:38] <neonixcoder> Ben64: I shutdown my test machine, will try to boot it..
[23:40] <neonixcoder> Ben64: I cannot boot as it crashed, Let me load my previous image and try to upgrade once again from 10.04 to 12.04
[23:40] <Ben64> neonixcoder: you have an image?
[23:40] <neonixcoder> Ben64: Do I have to do any preliminary tests before upgrade?
[23:40] <neonixcoder> I have a running 10.04 image..
[23:41] <Ben64> make sure you don't have any 3rd party repositories
[23:41] <neonixcoder> Ben64: We test everything before moving to prod..
[23:51] <neonixcoder> Ben64: Sure, will remove any thirdparty stuff..
[23:51] <Ben64> its almost always the cause of problems
[23:54] <neonixcoder> Ben64: Sure..