[00:37] <elkepon> hello I have a quick and simple question for you guys about partitioning
[00:38] <elkepon> when I install linux if i want to create a new partition what settings do I choose? logical or primary?
[00:38] <elkepon> and what extention?
[00:38] <elkepon> I want to be able to read it in linux
[00:38] <elkepon> and that can be auto-mounted
[00:38] <elkepon> anyone here>
[00:38] <elkepon> ?
[00:44] <punkgeek> how to install synaptics driver for tuchpad?
[00:45] <sav0> elkepon: choose logical
[00:45] <sav0> ext4 extension
[00:46] <sav0> when the partition gui appears, the defaults should already be logical, ext4, mount it on '/'
[04:35] <cameron_> can i ask questions here?
[05:10] <ahoneybun> about Kubuntu cameron_?
[05:30] <cameron_> yes, I can't find anywhere in settings to disable the trackpoint on my dell laptop
[05:31] <cameron_> I'm using kubunut 15.04
[05:45] <ahoneybun> cameron_: System Settings -> Input Devices -> Trackpad
[06:36] <regedit> SOS :( after installing nvidia drivers 355.11 recommended from driver manager, i cannot access my graphical desktop
[06:37] <regedit> this happened after switching from embedded to discrete GPU, how can i switch back to embedded from command line?
[06:37] <regedit> i have nvidia-prime installed
[06:39] <dvm> hi!
[06:40] <dvm> привет
[10:24] <nexia> Hi. My friend is trying to install kubuntu 15.04 and is getting the ion(0)libGL error: unable to load driver: r600_dri.so
[10:24] <nexia>  error.
[10:24] <nexia> when he installed steam
[10:27] <nexia> Seems to be a thing with his graphics card, which is an AMD....and lshw -numeric -C display
[10:27] <nexia>  resulted in http://paste.ubuntu.com/12499465/
[10:29] <marcofe> hello all
[10:32] <lordievader> nexia: Perhaps Steam works better with the fglrx driver.
[10:33] <nexia> also http://pastebin.com/jzAFcamV
[10:34] <nexia> lordievader: wouldn't he want to install the AMD radeon whatever drivers on his kubuntu installation? (I'm totally unfamilar with AMD, haven't used a device with an AMD graphics card)
[10:35] <nexia> I don't think he has run sudo apt-get upgrade yet. Would that help perhaps?
[10:35] <lordievader> nexia: The radeon driver is the open source one. Fglrx is the closed source driver.
[10:36] <nexia> So it would work...for what I think is a slightly old one?
[10:37] <nexia> I mean. "Slightly old graphics card"
[10:37] <nexia> AMD Radeon™ HD 6670
[10:37] <nexia> or similiar :P
[10:37] <lordievader> Yes, the 6k series should still be supported.
[10:49] <nexia> lordievader: friend: "Plasma crashed?!?!"
[10:49]  * nexia has a bad feeling about this :(
[10:50] <marcofe> hello guys, i've a problem and i don't find a solution. When i started my pc and no connection is present, plasma is to 100% of the CPU and into desktop there aren't no icons, no bar. After set connection (set ip address and so on), plasma crashes and everything become ok. Anyone do run into in this issue?
[10:51] <nexia> How would he be able to post some sort of debug
[10:52] <lordievader> nexia: What changed?
[10:52] <lordievader> The driver?
[10:52] <BluesKaj> Howdy folks
[10:52] <nexia> lordievader: Apparently there were some 'additional software updates' (I think it was the kubuntu driver manager or wahtever)
[10:53] <nexia> that seems to have fixed the steam issue for him
[10:53] <lordievader> nexia: That is the fglrx driver ;)
[10:53] <nexia> O_O
[10:53] <nexia> ah. nevermind. 5:53 AM - Emral: steam still doesn't work, like I said
[10:53] <nexia> :D
[10:53] <lordievader> Or atleast I think you are talking about the additional drivers utility.
[10:54] <nexia> I asked him to reboot...
[10:54] <lordievader> 'Still doesn't work', how?
[10:54] <nexia> Probably mis-understood him. In any case, he's rebooting via sudo reboot now.
 Probably mis-understood him. In any case, he's rebooting via sudo reboot now.
[10:57] <nexia> Dumb connection :|
[12:23] <irusel> Hello.
[12:24] <Okitain> irusel: haaai senpai
[12:49] <steve-_-> hi all. this wiki page (https://wiki.ubuntu.com/WilyWerewolf/Beta1/Kubuntu) has a field "Upgrading from 15.04
[12:49] <steve-_-> " but then it says twice (why twice?) "note that this does not work" and then again there's a description what to do? is that a joke?
[12:53] <lordievader> steve-_-: The kubuntu-do-release-upgrade tool doesn't work, do-release-upgrade does work.
[12:54] <steve-_-> lordievader: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1464330 last comment mentions that it might be solved
[12:54] <steve-_-> I'll try to confirm
[12:54] <lordievader> That is what I heard, that is thould be fixed.
[12:55] <lordievader> But I'd use do-release-upgrade anyways ;)
[13:03] <steve-_-> fix confirmed. so can someone update that wiki page?
[13:07] <steve-_-> lordievader: do you have a wiki account?
[13:08] <lordievader> I do.
[13:09] <steve-_-> would you update that field? terminal kubuntu-devel-release-upgrade works like a charm
[13:09] <steve-_-> the linked bug is a dupe anyways but the orginial bug is fixed so both texts with link should be removed I guess
[13:15] <Eli2> does anyone here have an idea how to prevent the systray from flickering, doing weird things and eating cpu
[13:15] <lordievader> Updated, steve-_-
[13:16] <Eli2> it makes kubuntu kinda unuseable for me
[13:21] <MoonUnit`> oh well, looks like i'm not going to get any support with the rotation problem in Wily.
[13:22] <MoonUnit`> he wants me to upgrade the BIOS despite rotation working fine on the same xorg version in arch.
[13:24] <steve-_-> lordievader: thx, a friend did some further cleaning on the wiki
[13:24] <steve-_-> should be less confusing to users now
[13:47] <DDR> Hi all. I'm having an issue where I'm getting very low framerates on an app I'm writing in Chromium.
[13:47] <DDR> I don't think it's the app, since chromium reports internally that it's rendering 50fps.
[13:47] <DDR> I tried running glgears, and got wildly varying framerates. http://www.pasteall.org/61230
[13:48] <DDR> From 3000 to 3. :|
[13:50] <DDR> ... Wow, complaining worked excellently. All my problems just went away.
[13:50] <DDR> Couldn't have done it without you guys! :D
[13:50] <Gamayun> Hehe!
[14:03] <lordievader> MoonUnit`: What rotation problem?
[14:05] <MoonUnit`> lordievader: if i rotate my 2nd screen with monitor.conf or xrandr the screen corrupts, works in vivid and arch but not in wily. radeonsi driver.
[14:06] <lordievader> Does the screen corrupt and after a while come back? (That is what I am seeing here when switching from 2 screens to one or vice versa.
[14:06] <lordievader> )
[14:08] <MoonUnit`> no stays corrupt, if i rotate back to normal it works ok. the weird thing is when i rotate left i can see the conky display from when i was using arch.
[14:09] <lordievader> Hmm, sounds a bit like the driver is acting up. Do the driver versions match?
[14:09] <MoonUnit`> haven't looked, i'll check next time i boot into wily
[14:17] <Okitain> what is wily again?
[14:18] <lordievader> !wily
[14:18] <Okitain> ah
[14:19] <Okitain> is it currently beta1, beta2, or RC?
[14:24] <lordievader> Beta1
[14:24] <lordievader> < ubottu> A schedule of wily werewolf (15.10) release milestones can be found here: https://wiki.ubuntu.com/ReleaseSchedule
[14:28] <solarseed> hi all
[14:28] <solarseed> I am looking for a Tool to create Thumbnails from a specific Directory containing Jailpegs
[14:29] <solarseed> Are there any LINUX Commands I can do this with, or can anyone recommend a Tool within the Kubuntu Repos?
[14:38] <Gamayun> solarseed: There are are ton of options for that. ImageMagick for one: http://polishlinux.org/howtos/cli-tricks-creating-image-thumbnails/
[14:41] <solarseed> Thanks Gamayun
[14:41] <solarseed> Nice Tutorial! :)
[14:42] <Gamayun> Sure ;)
[14:46] <MyPictures> Is the best solution of issue 1182784 really to just install a different keyboard layout then Switzerland and afterwards switch to it after installation? https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1182784
[14:59] <Gamayun> MyPictures: Possibly. I use a dvorak-variant, and having an 'exotic' layout set during boot can produce some oddities. Esp. if you have an encrypted hard drive, making a passphrase for it on a fallback layout.
[14:59] <Gamayun> ... is something that I would recommend.
[15:01] <MyPictures> Thanks
[15:02] <MyPictures> Yeah well I use germanies keyboard layout which is pretty much the same and luckly I can also show what Im typing in.
[15:06] <Gamayun> MyPictures: Should be fixed in Wily though (fingers crossed).
[15:07] <MyPictures> Ohh would be nice I currently use kubuntu 15.04
[15:10] <MyPictures> Thx Gamayun! It worked fine.
[15:11] <Gamayun> :)
[15:18] <Gamayun> Does anyone here have any experience using telepathy's desktop sharing function (xmpp & krfb/krdc)?
[15:18] <Gamayun> Does it need port forwarding / tunelling set up in advance?
[15:19] <Gamayun> I'll be setting up a Kubuntu box for my mother, and since we live in different countries, being able to help her remotely is probably a good idea.
[15:19] <Gamayun> Alternatively, is there someone willing to test it out with me?
[15:32] <austin6598>  i have my printer driver installed but how do i get it connected? kubuntu 15.04
[15:42] <MyPictures> austin6598: Under the printer settings
[15:42] <MyPictures> you add a new printer
[15:42] <MyPictures> Gamayun: No idea I mostly use teamviewer or ssh over putty
[15:42] <austin6598> MyPictures> its already added
[15:43] <MyPictures> but usualy for a connection to get it from outside you need to open the port from the router and from your software Firewall aswell
[15:43] <MyPictures> Then you are good to print?
[15:43] <austin6598> no it says it cant connect
[15:43] <MyPictures> Is it over USB?
[15:43] <austin6598> status is "idle"
[15:43] <austin6598> no wireless
[15:44] <MyPictures> Wireless --> Router --> PC or direct wireless?
[15:44] <austin6598> pc to printer directly
[15:44] <austin6598> actually i think its over the router
[15:44] <austin6598> yea it is
[15:44] <MyPictures> But the setup found it and installed it?
[15:44] <austin6598> the printer is connected to the wifi as it works on other computers
[15:44] <MyPictures> So it is visible
[15:45] <austin6598> i did it a long time ago and now its not working
[15:46] <Gamayun> MyPictures: Yeah, that's my thinking.
[15:48] <MyPictures> austin6598: Remove it and try if you find it again.
[15:49] <MyPictures> I assume your printer used DHCP to get an IP from the router so sometimes it get assigned a new one then
[15:49] <MyPictures> If your router frimware sucks...
[15:49] <MyPictures> usualy its smart to bind a IP to a MAC adress
[15:51] <austin6598> now its just called unknown and says idle
[15:51] <austin6598> oh ill try it showed up under discovered network printers
[15:56] <austin6598> thanks all set
[16:06] <steve-_-> ok, there's still a lot of work for kubuntu to do regarding the 15.10 update process. after running for 2 hours, I'm then told that modemmanager was not installed. and the next error msg says, update could not be installed. wasting 2h of a users time to figure that out is not cool
[16:06] <steve-_-> lol after clicking ok on the last msg, the next message is "update complete"
[16:07] <MyPictures> Yeah agree
[16:07] <MyPictures> But I really like the KDE Plasma
[16:07] <zapBrox> info zapbrox
[16:07] <MyPictures> Its super resposive
[18:09] <solarseed> Is there a Pendant to Adobe Flashanimator which is Free and OpenSource?
[18:09] <solarseed> I've still got some Projects (Videos) pending to be created... and I don't really like to use Adobe Software...
[18:10] <steve-_-> solarseed: why use flash at all?
[18:13] <Okitain> solarseed: synfig and Pencil2D are both animation creation packages, but they do not support Flash.
[18:14] <Okitain> honestly, as a person whose friends have banged the walls of Flash limitations, i would advise against using it at all.
[18:16] <Okitain> and if you are going to be serious about animation, maybe use ToonBoom, which costs $375 or $25/month
[18:23] <DDR> Weird. If I ctrl-alt-f12 by accident, when I come back to my graphical desktop via ctrl-alt-f7, my graphical desktop has high fps again.
[18:24] <DDR> Then, an hour or two later, my graphical desktop starts chugging again, and again I fix it.
[18:26] <Okitain> DDR: do 3d benchmarks have the same kind of behaviour on your desktop as well? Does the CPU usage seem high? Does changing drivers help
[18:26] <DDR> Well, I just fixed the problem, so it'll be a while until I can test.
[18:27] <Okitain> DDR: also, try changing the desktop rendering backend/method
[18:27] <DDR> But fgl_glxgears had weird slowdown, it oscillated between 15fps and 3000fps.
[18:28] <Okitain> (e.g. GLX/EGL and OpenGL/XRender)
[18:28] <DDR> I'll try OpenGL 3.1, as opposed to 2.0 for now.
[18:28] <DDR> Ah, OK.
[18:32] <DDR> Well. xRender seems to be where it's at.
[18:34] <Okitain> DDR: where it's at? Are you from the nineties?
[18:34] <DDR> Yes, as it happens.
[18:35] <DDR> he he he
[20:05] <kaneki-ken> hi, there
[20:07] <mparillo> From 1965 http://www.bobdylan.com/us/songs/positively-4th-street You say you lost your faith / But that's not where it's at / You had no faith to lose / And you know it
[20:07] <Okitain> mparillo: is this a thing that in any way relates to kubuntu?
[20:15] <mparillo> Fair enough. I probably should have gone offtopic. I was replying to DDR's use of the phrase "where it's at"
[20:16] <Okitain> Actually "where it's at" is also in another Dylan song
[20:16] <Okitain> that is, Rolling Stone.
[20:16] <DDR> Now that you mention it, it's probably where I heard it. I've been listening to some Bob Dylan lately. :)
[20:26] <zKarp> Quick question, does anyone have experiance with OpenSuse? what draw backs does it have vs KUbuntu
[20:27] <Okitain> zKarp: OpenSuse has a more centralized configuration menu, which occasionally conflicts with the menus that are provided by KDE
[20:27] <Okitain> also AFAIK no Plasma5 available yet
[20:30] <zKarp> Thank you Okitain.
[20:37] <mparillo> If you use Open Suse's Tumbleweed you do get Plasma 5. The biggest disadvantages are (1) It is a more traditional Unix root / user versus the hidden root / sudo approach *buntus use (which I find much easier for a single-user desktop distro). Second they use RPMs instead of DEBs. I find dependency resolution is smoother with DEB-based distros.
[20:38] <mparillo> Last (for me at least), I find more software just works on *buntu. Sure, if I were smarter, I could make it work on Open SUSE.
[20:40] <zKarp> mparilllo, I found out that things break pretty easy, within a few minutes after testing tumbleweed
[20:40] <zKarp> I tried to install mpeg codecs and dependencies were all missing.
[20:42] <zKarp> and after updating, bunch of things broke too lol
[20:42] <frecel_> is anyone else missing some options in the right click menu in dolphin in15.10?
[20:43] <clivejo> frecel:  try kubuntu-devel for wily 15.10 questions
[20:44] <mparillo> Yes, I lost patience with tumbleweed after a couple of hours. If I want new stuff, I would rather just run the Kubuntu devel release.
[20:46] <quisim> I haven't used KDE since Ubuntu 12.10. Any tips?
[20:50] <clivejo> use it, its great :)
[21:04] <quisim> I guess I'm looking for help with the window manager and widgets. Where do I start is what I'm asking.
[22:57] <bartek> i have problem with installation
[22:59] <clivejo> what is the problem?
[22:59] <bartek> when i start instalation media from usb it hang when desktop image appear
[23:00] <bartek> i have nvidia go 7300 gpu
[23:00] <bartek> acer 5610
[23:11] <clivejo> which kubuntu version?
[23:13] <clivejo> I have trouble with Nvidia chipsets and have to pass nomodeset to the kernel on boot
[23:13] <clivejo> can you edit the grub line and see if that helps?
[23:22] <rayneayami> im experiencing an error with kvm
[23:23] <rayneayami> internal error: cannot load AppArmor profile 'libvirt-64f8f795-aea1-4538-86b9-34ac393c24f6' this is the error and i can't locate a solution
[23:42] <ejay> hi all
[23:49] <punkgeek> when im running make -j for compile new kernlen i got this error, what should i do?   http://paste.ubuntu.com/12510242/