[00:00] <finetundra_> Bashing-om: so now openbox will start, but only when the command xinit or startx is given. I still can't start from lightDM
[00:01] <finetundra_> Bashing-om: what am I missing?
[00:02] <creep> can anyone tell me what is ACPI PCC probe failed
[00:02] <creep> ?
[00:07] <Bashing-om> finetundra_: I do not run openbox. so no direct knowledge, but in the link see the section " Creating a Openbox/Gnome session " .
[00:08] <finetundra_> Alright, will do. Thanks
[00:11] <andy__> !pastebinit
[00:12] <andy__> !pastebin
[00:13] <k_sze> Among http, ftp, and rsync access methods of apt mirrors, is any one recommended over the other?
[00:14] <k_sze> I'm guessing rsync would be most terse (and fastest) of the 3 protocols?
[00:15] <EriC^^> i think it's the slowest
[00:17] <k_sze> actually, does apt-get even support rsync?
[00:17] <andy__> http://paste.ubuntu.com/12809872/
[00:18] <EriC^^> i dont think so
[00:19] <andy__> My md5sum from my install of kxstudio on a usb does not match.
[00:19] <k_sze> rsync is just for synchronizing between mirrors and not for use by apt-get?
[00:19] <wileee> andy__, What's that from?
[00:19] <wileee> andy__, Ah, the usb load, you summed it?
[00:19] <andy__> wileee, That is from the usb I was trying to load earlier.
[00:20] <andy__> wileee, Yes I summed it.
[00:20] <wileee> andy__, So you've checked the iso I assume?
[00:20] <andy__> wileee, Yes.
[00:20] <zproc> hello, is there a chan for 15.10 or can i ask a question about it here?
[00:20] <andy__> wileee, The iso as a whole matches.
[00:20] <wileee> andy__, Coo, good job, what app have you used to load the iso here?
[00:21] <wileee> zproc, #ubuntu+1 till release
[00:21] <andy__> wileee, I guess you mean cool.
[00:21] <wileee> yes, lol
[00:21] <Bashing-om> zproc: 15.10 is #ubuntu+1 .
[00:21] <wileee> I never coo
[00:21] <andy__> wileee, I used usb-creator-gtk to load the iso on the usb drive.
[00:22] <zproc> Bashing-om: thank you
[00:23] <wileee> andy__, Ah, did you make or are sure there is a fat32 partition?
[00:23] <Bashing-om> zproc: :) soon wily will be supported here .
[00:23] <andy__> wileee, Yes.
[00:24] <andy__> wileee, I formated the usb with a linux tool to create the Fat32 partition.
[00:24] <Nikesh> I'm trying to investigate why my system hangs on shutdown/restart. I turned off the splash and I'm seeing 'mount: / is busy' as the last thing.. http://i.imgur.com/2Cnc4EA.jpg Any ideas?
[00:24] <wileee> andy__, I have gone as far as using gparted to make a new table and partition just to be sure it's clean, not sure why the onboard is having issues, partition has to be big enough as well.
[00:24] <andy__> wileee, I don't think that is the issue.
[00:25] <EriC^^> Nikesh: try stopping unneeded services maybe
[00:25] <andy__> wileee, I tried booting it on a computer with UEFI, and it would not load.
[00:26] <wileee> andy__, I would try another from pendrivelinux.com the error you've shown has many possibilities from installs to live iso's, at this point a good boot is what I would go for.
[00:26] <andy__> wileee, The md5sum said that grub.cfg is missing.
[00:27] <andy__> wileee, Would that be something that a bios would do?
[00:27] <Nikesh> EriC^^: `sudo stop X` ? and how do I know which are unneeded?
[00:27] <zproc> yeah, it's the 20 right?
[00:27] <andy__> wileee, Would it remove the grub.cfg file?
[00:27] <zproc> Bashing-om: the 20 right?
[00:27] <wileee> andy__, means nothing to me on a iso load, chasing errors on an iso, if summed out bad is like chasing a unicorn.
[00:27] <EriC^^> Nikesh: type service --status-all
[00:28] <EriC^^> Nikesh: like ssh, apache etc, whatever you have that you dont need
[00:28] <Bashing-om> zproc: I have not seen a release date to this tim for 15.10 .
[00:28] <andy__> wileee, I guess it would be like burning a CD and having errors there.
[00:28] <EriC^^> Nikesh: sudo service <service> stop
[00:28] <zproc> Do the flavors will be released at the same time that Ubuntu?
[00:28] <zproc> (oops sorry for my bad english)
[00:28] <wileee> andy__, Good analogy yes, iso is good, you need a good sum on a usb at the least.
[00:29] <wileee> zproc, Some flavors no, they are used all across linux.
[00:29] <wileee> operating systems
[00:30] <hamza> hello, i want to ask a specific Xorg question, i want to offload to Nvidia GPU while using a display connected to Intel integrated output
[00:30] <wileee> zproc, The flavors ubuntu provides however are as up to date at least at it's release time.
[00:31] <wileee> that vague enough, heh
[00:33] <hamza> I want to use offloading as a substitute of bumblebee
[00:34] <hamza> because bumblebee renders using the discrete GPU in a seperate Xorg instance, and uses a virtualgl bridge to send frames back, this hogs performance
[00:34] <andy__> wileee, What is the difference in using a program to create a bootable usb and just copying the files from the iso on th usb?
[00:34] <wileee> I thought there were newer options
[00:35] <andy__> *err, on the usb?
[00:35] <wileee> andy__, I see people often using dd to do this, not something I do, but that is just moving it to the usb without a partition is all.
[00:36] <EriC^^> andy__: did you checksum the iso?
[00:36] <andy__> Do they expand the iso before copying it?
[00:36] <andy__> EriC^^, Yes.  It passed.
[00:36] <EriC^^> andy__: try to dd it
[00:37] <EriC^^> just sudo dd if=/path/to/iso of=/dev/sdX bs=4M && sync
[00:37] <wileee> +1 andy__ follow that ship
[00:37] <EriC^^> give it the usb disk name not the partition
[00:37] <andy__> Hold on.  Let me format it first.
[00:38] <EriC^^> no need
[00:38] <andy__> Unless I don't have to?
[00:38] <EriC^^> yeah
[00:38] <wileee> thanks EriC^^ I never do this and know what a mistake does, heh
[00:39] <EriC^^> np wileee :)
[00:39] <wileee> good help is great in other words
[00:54] <DeathDealer> hello
[00:54] <DeathDealer> anyone herew
[00:54] <DeathDealer> ?
[00:54] <inteus> no
[00:54] <DeathDealer> lol
[00:54] <inteus> !ask | DeathDealer
[00:54] <inteus> :)
[00:54] <DeathDealer> yeah why wont a .run file run even in sudo terminal ?
[00:55] <EriC^^> DeathDealer: what file is it?
[00:56] <DeathDealer> updated version of warzone 2100
[00:56] <EriC^^> DeathDealer: if it doesn't need sudo, don't use sudo with it
[00:56] <DeathDealer> i set executable
[00:56] <DeathDealer> and nothing
[00:56] <DeathDealer> either way
[00:56] <DeathDealer> in gui and terminal
[00:56] <EriC^^> type file /path/to/.run
[00:57] <DeathDealer> even if my current dir is the one its in ?
[00:57] <EriC^^> then just type file <run file>
[00:58] <DeathDealer> file instead of ./ ?
[00:58] <EriC^^> yeah
[00:58] <EriC^^> file bla.run
[00:58] <DeathDealer> it has been years since i last messed with linux
[00:58] <DeathDealer> and then it was only shell accounts for MUDs
[00:59] <DeathDealer> only the second system i've ever installed it on
[00:59] <DeathDealer> btw any suggestions for a decent cross-platform linux/windows RTS games with multiplayer?
[01:00] <andy__> I seem to remember warzone 2100 being on the list of games available on Linux.
[01:00] <curiousx> DeathDealer: search in Steam about RTS games
[01:00] <DeathDealer> yeah but i cant update to 3.1.2 because im a moron
[01:00] <DeathDealer> cant get steam to install
[01:01] <andy__> DeathDealer, Try typing apt-cache search games
[01:01] <curiousx> DeathDealer: why is that ? any error that you could paste ?
[01:02] <atompower> https://www.youtube.com/watch?v=ZLQD3bsrD9A
[01:02] <atompower> there you are deathdealer
[01:02] <DeathDealer> on a guest account on this system right now so no but hold on and i'll have my roommate log back in..... its his laptop but i do all the work on it....
[01:02] <DeathDealer> hold up
[01:02] <DeathDealer> brb
[01:03] <NathanielHill> Trying to install Ubuntu on my Asus X205TA, keyboard works at grub menu but doesn't work in installer. Any grub options I could try setting? Using the minimal iso
[01:04] <andy__> EriC^^, How can I see the progress of dd without disturbing the program?
[01:04] <curiousx> andy__: sudo apt-get install iotop ; sudo iotop
[01:05] <andy__> Nevermind.  It just finished.
[01:05] <atompower> Andy use pipeviewer
[01:05] <atompower> http://askubuntu.com/questions/215505/how-do-you-monitor-the-progress-of-dd
[01:05] <atompower> You have to use it when you start dd though
[01:06] <curiousx> andy__: pipeviewer aka "pv" command :p
[01:06] <andy__> atompower Thanks.
[01:06] <Yondering> hm.  ok, anyone able to enlighten me as to why ctrl:nocaps doesn't seem to be working in 15.04?
[01:07] <andy__> atompower You are pretty fast at finding the answer to my question.  You must have referenced that question on Ask before.
[01:08] <erinaldo> oi
[01:08] <atompower> Nah. I just had the same problem last week.
[01:09] <curiousx> !pt | erinaldo
[01:09] <easyOnMe> hello
[01:09] <easyOnMe> Good morning everyone
[01:09] <oletusco> Hello, someone speaks Spanish here
[01:09] <oletusco> ??
[01:10] <erinaldo> ola
[01:10] <oletusco> hola
[01:10] <easyOnMe> I need help about this:
[01:10] <easyOnMe> Fetched 936 kB in 12s (74.8 kB/s)
[01:10] <easyOnMe> W: Failed to fetch http://mirror.nus.edu.sg/ubuntu/dists/trusty-updates/main/binary-i386/Packages  Hash Sum mismatch
[01:11] <Bashing-om> NathanielHill: BIOS option is "IOMMU Controller" ? Set it to "Enabled". Plug and play OS, enabled . // Maybe yes ?
[01:11] <andy__> oletusco, Try loooking for the spanish ubuntu channel, if you want to talk about Ubuntu in Spanish.
[01:11] <NathanielHill> Bashing-om: No BIOS, it's 32-bit UEFI
[01:12] <andy__> !es | oletusco
[01:12] <NathanielHill> Bashing-om: not many options either
[01:12] <oletusco> Thank, but i don'n know other server
[01:12] <Bashing-om> easyOnMe: Here larely the niiros are having a bor of a problem seems like. Wait 'til tomorrow and try again . Just had that experience.
[01:13] <andy__> md5sum: WARNING: 2 computed checksums did NOT match
[01:13] <oletusco> Thank, my english is very bad
[01:13] <Bashing-om> mirrors*
[01:14] <easyOnMe> Bashing-om: oh so this is not my ubuntu download setup problem at all
[01:16] <Bashing-om> easyOnMe: It can be .. but .. one can delete the control files and reload . But I do suggest to wait and see if your mirror syncs up . Mine did .
[01:17] <Bashing-om> easyOnMe: If you are using a GUI, it is pretty easy to change the mirror; see if that fixes thre issue .
[01:24] <DeathDealer> hey im back
[01:24] <substatic> Hello
[01:25] <DeathDealer> i need to know how to compile warzone2100 3.1.2
[01:25] <substatic> Anyone here familiar with UEFI boot sequence? Having an issue making a bootable USB run correctly
[01:26] <DeathDealer>  i need to know how to compile warzone2100 3.1.2
[01:26] <freerider66> set weechat.look.eat_newline_glitch off
[01:26] <substatic> DeathDealer, make install?
[01:26] <DeathDealer> doesnt work
[01:27] <substatic> What error are you getting?
[01:27] <curiousx> DeathDealer: /j #warzone2100
[01:27] <DeathDealer> *** No rule to make target 'install'.  Stop.
[01:28] <DeathDealer> THIS IS WHAT IM LOOKING AT
[01:28] <DeathDealer> 3rdparty/      config.h.in     COPYING.README  macosx/       tests/
[01:28] <DeathDealer> aclocal.m4     config.log      data/           Makefile.am   tools/
[01:28] <DeathDealer> AUTHORS        config.rpath*   depcomp*        Makefile.in   win32/
[01:28] <DeathDealer> autogen.sh*    config.sub*     doc/            missing*      ylwrap*
[01:28] <DeathDealer> build_tools/   configure*      icons/          pkg/
[01:28] <DeathDealer> ChangeLog      configure.ac    install-sh*     po/
[01:29] <substatic> Did you apt-get install?
[01:29] <Yondering> Would anybody here have experience using xmodmap to remap ctrl/caps in 15.04?  ctrl:nocaps in /etc/default/keyboard doesn't seem to be working.
[01:29] <curiousx> DeathDealer: http://developer.wz2100.net/wiki/CompileGuideLinux
[01:30] <substatic> DeathDealer: Did you run ./configure prior to running make? Have you tried running ./autogen.sh?
[01:30] <curiousx> Yondering: if you can't find any help here, then: /j #xmonad
[01:31] <Yondering> curiousx, thanks.
[01:31] <DeathDealer> no automake
[01:31] <Yondering> Hmm.  seems to work for login sessions, but xfce seems to be reverting it somewhere.
[01:32] <curiousx> Yondering: np, i'm makin' my way into "bspwm" :D good luck with xmonad :)
[01:34] <curiousx> Yondering: sry i can't help you "bspwm" will be my first tiling WM and i'm just reading its repo on github -.-
[01:34] <DeathDealer> hey what does Requires installation of untrusted packages mean ?
[01:34] <DeathDealer> and how do i bypass that
[01:35] <curiousx> DeathDealer: i send you a link with a full guide plus suguestions for fixing possible errors at compiling, did you see the link ?
[01:36] <DeathDealer> no was afk
[01:36] <DeathDealer> sorry
[01:36] <curiousx> DeathDealer: http://developer.wz2100.net/wiki/CompileGuideLinux
[01:40] <DeathDealer> wtf does Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
[01:40] <DeathDealer> E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[01:40] <DeathDealer>  mean ?
[01:41] <curiousx> DeathDealer: means you have "apt" running or "software center" that's cuz you get that eror
[01:42] <DeathDealer> would software updater cause that
[01:42] <curiousx> DeathDealer: wait for them to finish its job, thenm run one of them at a time
[01:42] <nelson_> hello
[01:43] <nelson_> necesito alguien que hable español por favor y conozca ubuntu
[01:43] <curiousx> !es | nelson_
[01:47] <dupingping> hi everyone
[01:48] <dupingping> how can i become a ubuntu member?
[01:48] <bindi> how can I list (with terminal) all the available login .. eh, sessions? I don't know the proper term so I can't google (like Gnome, Ubuntu, KDE)
[01:49] <bindi> hm, they are sessions! /usr/share/xsessions/
[01:50] <bindi> now how can I start X in another virtual terminal with a specified session, automatically?
[01:50] <bindi> I know 'startx -- vt6'
[01:51] <Dumle29> any reason that the sound, using media keys, stop at "100%" and not the actual 100% that I can slide it to in the sound control panel?
[01:51] <DeathDealer> what does ./autogen.sh && ./configure && make
[01:51] <DeathDealer>  mean
[01:51] <Dumle29> Ubuntu 15.04
[01:51] <DeathDealer> wait
[01:51] <Dumle29> I mean, it shoudln't even do anything to the volume of the signal, it's the optical output
[01:51] <DeathDealer> ./configure: line 2157: config.log: Permission denied
[01:51] <DeathDealer> whats that mean ?
[01:52] <Dumle29> DeathDealer: Uhhh
[01:52] <DeathDealer> what does ./configure: line 2157: config.log: Permission denied mean
[01:53] <Dumle29> DeathDealer: That whatever is on line 2157 of the configure script wasn't permitted
[01:53] <bindi> startx steam-bigpicture -- vt6 <- now, how to do this automatically? :P
[01:53] <DeathDealer> which means what
[01:53] <Dumle29> DeathDealer: Exactly that
[01:53] <Dumle29> DeathDealer: Line 2157 of that script was not permitted to run.
[01:53] <DeathDealer> ok let me rephrase that HOW DO I FIX ./configure: line 2157: config.log: Permission denied
[01:53] <Dumle29> DeathDealer: Without showing us the contenets of the configure script, we can't know anything else
[01:54] <Dumle29> what are you even trying to configure?
[01:54] <Dumle29> Oh you are trying to compile a program.
[01:56] <Dumle29> bindi: I think the info here could help you: https://www.reddit.com/r/archlinux/comments/2l1xcp/how_could_i_boot_directly_into_steam_big_picture/
[01:56] <cfhowlett> !details | DeathDealer : trickle clues >>> trickle solutions.
[01:57] <bindi> Dumle29: not raelly
[01:58] <tase> Anyone have experience with Ubuntu Desktop as a media pc (netflix, youtube) ?
[01:58] <Dumle29> bindi: Nah I just browsed through it. Lemme look on :)
[01:58] <DeathDealer> ok im confused the doc only has 1341 lines AND 2167 nor 2157 are anywhere
[01:58] <bindi> tase: netflix wont work
[01:58] <Dumle29> bindi: Sure it will?
[01:58] <Dumle29> Just use chrome, not chromium
[01:58] <bindi> oh
[01:59] <bindi> I thought it was completely out of the question
[01:59] <Dumle29> chrome has a DRM plugin built it
[01:59] <Dumle29> in*
[02:00] <pksadiq> DeathDealer: Does the folder contain a file named `autogen.sh'?
[02:00] <Dumle29> bindi: Do you want to start steam in bigpicture mode on boot?
[02:00] <wafflejock> tase: wouldn't call it a media PC really but I use my laptop for regular desktop stuff like watching youtube or netflix
[02:00] <bindi> Dumle29: I already have a session for steam bigpicture
[02:00] <DeathDealer> yes
[02:00] <bindi> /usr/share/xsessions# ls
[02:00] <bindi> gnome.desktop  steam-bigpicture.desktop  xbmc.desktop
[02:00] <Dumle29> bindi: So what was it that you wanted to do?
[02:01] <cfhowlett> tase, www.mythbuntu.org
[02:01] <bindi> Dumle29: start that session in tty6 when user logs in to xbmc session (tty7)
[02:01] <DeathDealer> i ./autogen.sh already
[02:01] <DeathDealer> then i ./configure && make
[02:01] <DeathDealer> and it gives the ./configure: line 2157: config.log: Permission denied
[02:02] <Dumle29> bindi: Oh. Yeah I'll take a pass on that :/
[02:02] <Bashing-om> dupingping: A place to start : https://wiki.ubuntu.com/Membership/NewMember .
[02:02] <pksadiq> post the config.log at paste.ubuntu.com and give us the url
[02:03] <pksadiq> DeathDealer: ^^
[02:05] <DeathDealer> http://paste.ubuntu.com/12812711/
[02:06] <DeathDealer> brb in like 45 minutes
[02:06] <DeathDealer> gotta make a run
[02:06] <DeathDealer> i'll be here
[02:06] <DeathDealer> tho
[02:08] <DeathDealer> .
[02:11] <poee> how do  I play hevc in smplayer
[02:18] <itai> Hello can someone help me out?
[02:19] <Bashing-om> !ask | itai
[02:20] <itai> Im new to linux/Ubuntu and after downloading something I cant seem to find an executable so how do I run something i just downloaded?
[02:21] <andy__> Can you type the name of the program that you installed in a comand terminal?
[02:22] <cfhowlett> itai, you "downloaded" something? best practice is to install via the software center.
[02:22] <wileee> itai, Not often you would download, what is it?
[02:22] <itai> It was just a Rar opener and how do i get to the software center?
[02:23] <andy__> itai, I guess you didn't say you installed it.
[02:24] <andy__> Itai the software center should be in the menu on the left.
[02:24] <andy__> Itai I can't describe what your menu looks like because I am using Xubuntu.  I am guessing that you are using standard Ubuntu.
[02:25] <itai> ok now im installing RAR from the software center. I'm using Ubuntu Mate
[02:26] <andy__> itai Congradulations.
[02:26] <andy__> I am glad you found the software center.
[02:27] <cfhowlett> itai, avoid "downloading and installing" stuff for best results.
[02:27] <andy__> I was never able to get Mate to install.  It looked like such a good version of Ubuntu.
[02:28] <itai> Thanks. I feel like a genius. So downloading just makes things hard.
[02:28] <evanion> Hello, Where can I see the generated user information for a MaaS provisioned machine?
[02:28] <cfhowlett> !anual | itai,
[02:28] <cfhowlett> !manual | itai,
[02:29] <Abe> when I installed kubuntu I crypted my home folder I think... or the hole partition I don't remember. how can I change the password for the crypted Partition... ?
[02:29] <cfhowlett> itai, you might also find www.fullcirclemagazine.org/downloads helpful.  start with issue #0, read to #101 and you'll be a certifiable ubuntu genius.
[02:32] <andy__> cfhowlett, I was thinking that if he just learns about apt-get from the manual, it will be enough.  That magazine looks very interesting, too.
[02:33] <andy__> bye yall
[02:37] <itai> What is the best app for mounting an ISO?
[02:38] <Abe> https://www.eff.org/files/images_insert/ubuntu_crypto1.png can you change PASSWORD? I still know it but I wanna change
[02:38] <cfhowlett> itai, terminal.  command would be mount foo.iso
[02:38] <Abe> https://encrypted.google.com/search?q=encrypted+ubuntu+installation&biw=987&bih=650&noj=1&source=lnms&tbm=isch&sa=X&ved=0CAoQ_AUoBGoVChMI1JS0xLzIyAIVS95jCh21kwRU#imgrc=wozjbwTaiZutoM%3A
[02:38] <bazhang> !info gmountiso
[02:38] <Abe> sorry https://www.eff.org/files/images_insert/ubuntu_crypto2.png
[02:40] <OerHeks> Abe, start Disk Utility, select the encrypted partition. Click Change passphrase.
[02:50] <NathanielHill> Any idea on grub options to try if my keyboard doesn't work in the installer?
[02:52] <OerHeks> NathanielHill, select live mode with your mouse, and try gedit/libroffice/terminal
[02:52] <OerHeks> if it works, it should work in the installer too, what keyboard? ps2/usb/bt
[02:53] <josh_> hello
[02:55] <josh_> q
[02:55] <DeathDealer> ok im back
[02:56] <DeathDealer> http://paste.ubuntu.com/12812711/
[02:56] <DeathDealer> anyone ?
[02:56] <DarkAlice> I need someone who can help me simplify things.. I was given a pc with Zorin 10 and I have no idea how to use this OS and want to convert to win
[02:56] <cfhowlett> DarkAlice, you have to ask zorin.  only ubuntu support here.
[02:56] <DarkAlice> BUT it tells me i need to have drive formatted for ntfs and they read system and logical
[02:56] <DeathDealer> ./configure: line 2157: config.log: Permission denied
[02:57] <DeathDealer> ./configure: line 2167: config.log: Permission denied
[02:57] <DarkAlice> Oh sorry f
[02:57] <bazhang> ask in the zorin channel DarkAlice
[02:57] <OerHeks> DeathDealer, what is that? care to tell us more about it?
[02:57] <DeathDealer> http://paste.ubuntu.com/12812711/
[02:57] <bazhang> DeathDealer, give us a synopsis Here
[02:57] <Abe> hello can somebody help me I have a question
[02:57] <cfhowlett> !ask | Abe
[02:57] <DeathDealer> trying to install warzone2100 3.1.2
[02:57] <Abe> ok
[02:57] <DeathDealer> already ./autogen.sh
[02:57] <bazhang> !info warzone2100
[02:57] <DeathDealer> but when i ./configure && make it says
[02:58] <DeathDealer> http://paste.ubuntu.com/12812711/
[02:58] <Abe> I need to change Password of LVM encrypted HDD
[02:58] <bazhang> whats wrong with the repo version DeathDealer
[02:58] <DeathDealer> ./configure: line 2157: config.log: Permission denied
[02:58] <DeathDealer> ./configure: line 2167: config.log: Permission denied
[02:58] <DeathDealer> dunno
[02:58] <DeathDealer> wont launch
[02:58] <bazhang> so install from ubuntu repos DeathDealer
[02:58] <DeathDealer> wont install
[02:58] <DeathDealer> either
[02:58] <DeathDealer> so i went this route
[02:59] <bazhang> what are the exact errors DeathDealer
[02:59] <DeathDealer> when i try to ./configure && make i get this error
[02:59] <DeathDealer> ./configure: line 2157: config.log: Permission denied
[02:59] <DeathDealer> ./configure: line 2167: config.log: Permission denied
[02:59] <DeathDealer> so i posted the config.log
[02:59] <DeathDealer> http://paste.ubuntu.com/12812711/
[02:59] <Abe> I know the Password but I need to change it
[02:59] <bazhang> DeathDealer, the install from repos error not the compile errors
[03:00] <OerHeks> Abe, start Disk Utility, select the encrypted partition. Click Change passphrase.
[03:00] <DeathDealer> ok then help me tell me what to type
[03:00] <cfhowlett> DeathDealer, "ain't nobody got time to read all that!"   at least point to the line with the error message!
[03:00] <bazhang> sudo apt-get install warzone2100  DeathDealer
[03:00] <utu8o> is Google's Chromebook using Ubuntu or something?
[03:00] <Abe> how do i find out which Sda is encrypted?
[03:01] <cfhowlett> utu8o, chromebooks use chrome ...
[03:01] <Abe> wait
[03:01] <bazhang> utu8o, chromeOS
[03:01] <utu8o> why would they not just use Ubuntu instead of ChromeOS?
[03:01] <cfhowlett> utu8o, ask google about that.
[03:01] <bazhang> ask them utu8o
[03:02] <Abe> http://paste.ubuntu.com/12813783/
[03:02] <utu8o> trying to take marketshare from Linux and Windows using Intel CPUs or something?
[03:02] <cfhowlett> !ot | utu8o,
[03:02] <DeathDealer> bazhang sudo apt-get warzone came back with E: invalid operation.
[03:02] <Mirodroid> its google's laptop os... ask google why chromebook's dont run android instead
[03:02] <bazhang> its not on topic here utu8o
[03:02] <bazhang> DeathDealer, you forgot install
[03:02] <utu8o> you can't even install Ubuntu on a Chromebook, Google locked it out
[03:02] <DeathDealer> sudo apt-get warzone2100 came back E: Invalid operation
[03:03] <cfhowlett> utu8o, OFF TOPIC in this channel.  go to #ubuntu-offtopic
[03:03] <bazhang> utu8o, thats not on topic here please stop
[03:03] <DeathDealer> idk im about to give up
[03:03] <bazhang> DeathDealer, sudo apt-get install
[03:03] <phiona> there has been no updates to 14.04 for some time now. is this normal?
[03:03] <bazhang> DeathDealer, you did not include install
[03:03] <NathanielHill> OerHeks: Mouse doesn't work either, it's an Asus X205TA
[03:03] <cfhowlett> phiona, current release is 14.04.3
[03:04] <utu8o> DeathDealer, you should put "install"
[03:04] <cfhowlett> phiona, open a terminal: sudo apt update && sudo apt full-upgrade
[03:04] <DeathDealer> already did that
[03:04] <Abe> OerHeks: Do you mean Gparted???
[03:05] <bazhang> DeathDealer, you left off install  try again
[03:05] <DeathDealer> i did
[03:05] <bazhang> DeathDealer, pastebin the terminal command and the exact error for us to see
[03:05] <OerHeks> NathanielHill, uh oh, there is a long forumpost about your machine .. http://ubuntuforums.org/showthread.php?t=2254322
[03:06] <OerHeks> Abe, no, disk utility, type disk in dash and the tool should show up
[03:06] <NathanielHill> OerHeks: Yes I know, and I was looking forward to installing a custom bootloader and kernel
[03:06] <NathanielHill> OerHeks: but, my keyboard doesn't even work immediately after the grub menu
[03:06] <OerHeks> NathanielHill, maybe the next ubuntu 15.10 works OOTB ..
[03:07] <NathanielHill> OerHeks: I'm using the 15.10 iso
[03:07] <NathanielHill> OerHeks: stuck on the install language menu
[03:07] <DeathDealer> http://paste.ubuntu.com/12813892/
[03:07] <OerHeks> NathanielHill, if that post (maybe start reading from the end) gives no solution, then i am out of clues :-(
[03:08] <phiona> why does the flashplugin-installer upgrade take sooooo long?
[03:08] <OerHeks> NathanielHill, maybe use an external usb keyboard?
[03:08] <bazhang> DeathDealer, thats the compile, not the install from repos that we asked for
[03:08] <Abe> OerHeks: Can I try with sudo cryptsetup luksAddKey /dev/sda3 ?
[03:08] <NathanielHill> OerHeks: not available atm
[03:08] <DeathDealer> its a different release all together not just an update
[03:09] <Abe> sudo cryptsetup luksRemoveKey /dev/sda3
[03:09] <OerHeks> Abe, never tried the comandline with luks, maybe someone else here knows?
[03:09] <DeathDealer> i have 2.1.4 i need 3.1.2 thing is thewre is no "update" its a whole new client
[03:09] <bazhang> DeathDealer, sudo apt-get install warzone2100  in terminal  pastebin that exactly and the errors
[03:09] <Abe> cuz I found this on Google: http://askubuntu.com/questions/109898/how-to-change-the-password-of-an-encrypted-lvm-system-done-with-the-alternate-i
[03:10] <DeathDealer> bazhang it doesn't work that way
[03:10] <bazhang> DeathDealer, yes it does
[03:10] <bazhang> DeathDealer, you have not yet shown us the errors when using that exact command
[03:11] <DeathDealer> no it doesnt its a new client not an update i already have 2.1.4 http://paste.ubuntu.com/12813933/
[03:11] <OerHeks> Abe, it might work, it has a green sign, that means verified.
[03:11] <DeathDealer> see
[03:11] <bazhang> DeathDealer, what version of ubuntu are you on
[03:11]  * OerHeks loves askubuntu
[03:12] <DeathDealer> idr
[03:12] <DeathDealer> live disk install
[03:12] <DeathDealer> didnt label it
[03:12] <bazhang> DeathDealer, what version
[03:12] <DeathDealer> IT HAS BEEN 10+ YEARS SINCE IVE MESSED WITH LINUX
[03:13] <DeathDealer> I DONT REMEMBER
[03:13] <inteus> chill dude
[03:13] <bazhang> lose the caps DeathDealer
[03:13] <bazhang> lsb_release -a    DeathDealer
[03:13] <cfhowlett> DeathDealer, attitude won't help you here
[03:13] <DeathDealer> 15.04
[03:14] <bazhang> 2.1.4 is ancient
[03:14] <Abe> OK it says when I type in new Password "No key available with this passphrase."
[03:14] <bazhang> !info warzone2100
[03:14] <bazhang> 3.1.1 is in the latest release of ubuntu
[03:14] <DeathDealer> i need cross platformability thats why i need 3.1.4
[03:15] <Abe> OerHeks: what Disk utility are you talking about ? I dont have it I use Kubuntu!
[03:15] <DeathDealer> i have a windows machine running 3.1.2
[03:15] <bazhang> DeathDealer, you should not have 2.1.4 with that version of ubuntu
[03:15] <DeathDealer> idk my ubuntu software center is glitchy as hell
[03:15] <DeathDealer> had a hard time installing as a matter of fact
[03:15] <bazhang> DeathDealer, 3.1.1 is the version you should have with that release of ubuntu
[03:16] <DeathDealer> idk
[03:16] <OerHeks> Abe, oh, you might want to reask in #kubuntu .. not sure how it is called
[03:16] <DeathDealer> i know what i compiled was 2.1.4
[03:16] <DeathDealer> but now this wont compile
[03:16] <bazhang> DeathDealer, dont use usc, install from the command line
[03:16] <OerHeks> Abe, and next time, tell us you use kubuntu
[03:16] <DeathDealer> trying to remember how to do all of this
[03:17] <phiona> why does the flashplugin-installer upgrade take sooooo long?
[03:17] <bazhang> DeathDealer, we gave you the exact terminal command to install the latest stable of warzone
[03:17] <Abe> Well Kubuntu is almost the same
[03:17] <slow_> hello, can anyone help me setup an l2tp vpn via Ubuntu 15.04 Server VPS
[03:17] <cfhowlett> phiona, it just does.  be patient.  stop asking.
[03:17] <slow_> i'm having trouble finding an updated tutorial
[03:18] <DeathDealer> and this is what happened
[03:18] <DeathDealer> http://paste.ubuntu.com/12813933/
[03:18] <bazhang> DeathDealer, is that compile error one again
[03:18] <DeathDealer> but its not compatible over multiplayer with anything...
[03:18] <DeathDealer> http://paste.ubuntu.com/12813933/
[03:18] <slow_> hello, can anyone help me setup an l2tp vpn via Ubuntu 15.04 Server VPS
[03:18] <slow_> i'm having trouble finding an updated tutorial
[03:19] <Abe> sudo cryptsetup luksAddKey /dev/sda3
[03:19] <Abe> Enter any existing passphrase:
[03:19] <Abe> No key available with this passphrase.
[03:19] <DeathDealer> no this is the sudo get-apt install warzone2100
[03:20] <DeathDealer> http://paste.ubuntu.com/12813933/
[03:20] <DeathDealer> apt-get rather
[03:20] <bazhang> ask every 20 minutes or so DeathDealer
[03:20] <bazhang> if someone knows they will perhaps help you DeathDealer
[03:23] <OerHeks> hmm nice, a recent tutorial for warzone2100 3.1.2 on their site is infected
[03:23] <bazhang> sourceforge?
[03:23] <OerHeks> no, https://betaguide.wz2100.bla bla bla
[03:23] <bazhang> nice spot
[03:24] <OerHeks> chrome says so
[03:24] <bazhang> even more reason to get the repos version
[03:24] <OerHeks> 4th entry: https://www.google.nl/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=ubuntu%20build%20warzone2100%203.1.2
[03:25] <OerHeks> that is the same error you get
[03:25] <OerHeks> 5th entry is infected
[03:26] <OerHeks> crappy beta 3.1.2 .. wait for a fix, deathdealer
[03:27] <slow_> hello, can anyone help me setup an l2tp vpn via Ubuntu 15.04 Server VPS
[03:27] <slow_> i'm having trouble finding an updated tutorial
[03:28] <Abe> ok now I need to change sudo password
[03:29] <bazhang> whats wrong with the old tutorial slow_
[03:30] <bazhang> !password | Abe
[03:32] <slow_> bazhang: how would i start the process of key generation? it shows "here is an example of "var file" and continues on with the tutorial
[03:32] <slow_> export KEY_COUNTRY="US"
[03:32] <slow_> export KEY_PROVINCE="CA"
[03:32] <slow_> export KEY_CITY="SanFrancisco"
[03:32] <slow_> export KEY_ORG="Fort-Funston"
[03:32] <slow_> export KEY_EMAIL="my@myhost.mydomain"
[03:33] <bazhang> slow_, ask in #ubuntu-server
[03:35] <brijith> Hey Guys, my home PC I don't have a mouse connected to it. How can I control mouse pointer using keyborad
[03:38] <brijith> Hey Guys, my home PC I don't have a mouse connected to it. How can I control mouse pointer using keyborad. I tried the option in universal access. But mouse pointer is not showing up in the screen.
[03:38] <brijith> Hey Guys, my home PC I don't have a mouse connected to it. How can I control mouse pointer using keyborad. I tried the option in universal access. But mouse pointer is not showing up in the screen.
[03:39] <bagus> hai
[03:40] <brijith> Hey Guys, my home PC I don't have a mouse connected to it. How can I control mouse pointer using keyborad. I tried the option in universal access. But mouse pointer is not showing up in the screen.
[03:41] <bazhang> patience brijith , every 15 mins or so not every two
[03:45] <bindi> brijith: is your numlock on?
[03:46] <brijith> bindi: No
[03:46] <bindi> well turn it on
[03:47] <brijith> bindi: still I am not seeing mouse pointer..
[03:47] <bindi> did you try pressing the numpad buttons?
[03:48] <brijith> bindi: is really require a mouse  connected to see the mouse pointer in the screen
[03:48] <OerHeks> brijith, solution: https://help.ubuntu.com/stable/ubuntu-help/mouse-mousekeys.html
[03:48] <bindi> numlock needs to be off anyway apparently :p
[03:48] <OerHeks> works, just tried it. ( use the arrows to navigate )
[03:49] <brijith> OerHeks: But in my screen pointer is missing
[03:49] <OerHeks> and use space to activate on/off
[03:49] <OerHeks> it will appear
[03:49] <OerHeks> else buy a mouse.
[03:50] <brijith> OerHeks: lol
[03:51] <OerHeks> universal access is standard, so it is your lucky day
[03:51] <brijith> OerHeks: I have two but not with me right now.. :(
[03:52] <OerHeks> never leave the house without your mouse.
[03:52] <brijith> OerHeks: universal access is enabled but don't know u mouse pointer is not appearing.. Should I logoff and login again and see if it appears
[03:53] <OerHeks> hmm that might do the trick.
[03:53] <brijith> OerHeks: let me see
[03:54] <OerHeks> brijith, or open terminal: ctrl alt T : sudo service lightdm restart
[03:55] <brijith> OerHeks: ok
[04:15] <brijith> OerHeks: now mouse pointer has came. but not moving
[04:17] <putro> apakah disini pengguna ubuntu semua ?
[04:21] <Spider> putro this is the english channel https://wiki.ubuntu.com/IRC/ChannelList << see that list for Ubuntu for your language.
[04:25] <RNeville> hello, everyone, when my computer boots I get an error, but can't read it, running ubuntu 1404
[04:26] <RNeville> is there a file I could read that would tell me the error on boot?
[04:26] <Latrodectus> RNeville: did you just install the os?
[04:26] <RNeville> no, I installed about a month ago
[04:26] <Latrodectus> and it's been working fine until now
[04:27] <RNeville> computer seems to run fine, but I am gettting something that isn't "ok" when booting
[04:27] <Latrodectus> oh, well there are log files that you can read
[04:27] <RNeville> my computer is "still" working fine, but I would like to read the error message I'm getting at boot
[04:27] <RNeville> it might be the bios telling me I have a hardware error
[04:27] <Latrodectus> RNeville: http://askubuntu.com/questions/91286/how-to-see-log-to-find-a-boot-problem
[04:28] <RNeville> thx Latrodectus
[04:28] <Latrodectus> RNeville: have you recently changed the hardware?
[04:28] <RNeville> no, but I have a bluetooth dongle that isn't working well, so it might be that!
[04:29] <Latrodectus> and you get the message in boot?
[04:30] <Latrodectus> is it for a wireless keyboard or mouse?
[04:32] <Bayangan> Is unity 8 ready for desktop?
[04:33] <RNeville> Latrodectus, it was the boot.log file I wanted to view
[04:33] <Latrodectus> RNeville: well glad to help
[04:33] <RNeville> no, it is a generic bluetooth dongle I use for a wireless headset Latrodectus
[04:35] <RNeville> Latrodectus, this maybe be the error I was seeing: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
[04:37] <RNeville> also Latrodectus getting this boot error: exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.107/24:/home".
[04:39] <RNeville> Recently tried to setup NFS, so probably this was what was causing my boot error I noticed
[04:41] <Latrodectus> makes sense, atleast it's an easy fix
[04:41] <RNeville> hopefully, Latrodectus
[04:41] <RNeville> not keeping me from booting, for sure
[04:43] <Latrodectus> question is there a way to edit a lxde panel from a config file, if so where is said config file... (running lubuntu lts, and yes i asked at #lubuntu already)
[04:47] <antonio_> I installed virtualbox yesterday...and just installed the guest additions.  Still can't USB to work.  What do I have to do?
[04:48] <Latrodectus> antonio_: https://help.ubuntu.com/community/VirtualBox/USB
[04:50] <Carl_Miller> Where does Ubuntu store compose key sequences?
[04:50] <Carl_Miller> Because I need to change Compose - y from the yen sign to y-macron, and similarly for its uppercase equivalent
[04:51] <Carl_Miller> ...meh
[04:51] <Latrodectus> Carl_Miller: have you read https://help.ubuntu.com/community/ComposeKey
[04:55] <antonio_> latrodectus: That didn't work.  No USB devices are appearing in Virtualbox
[04:56] <Latrodectus> antonio_: does everything else work in the vm?
[04:56] <antonio_> yeah..pretty sure
[04:56] <antonio_> When I plug in my device...it appears in linux..but not in the virtual xp running in Vbox
[05:01] <Latrodectus> antonio_: what kind of device is it?
[05:01] <antonio_> This is the issue I'm having https://forums.virtualbox.org/viewtopic.php?f=6&t=68920
[05:01] <antonio_> Its a brainwave mind machine...just need to access the internal storage to edit some files
[05:02] <antonio_> Its telling me "No USB Devices Connected"
[05:02] <Latrodectus> antonio_: what is the filesys on the usb?
[05:02] <antonio_> How can I figure this out?
[05:04] <thecha> on ubuntu how can i create an openvpn?
[05:04] <antonio_> latrodectus: Its also happening with my gf's phone.  Can't access any USB devices on it.
[05:04] <thecha> who is your gf?
[05:05] <antonio_> techa: the girl that is locked up in my basement
[05:05] <thecha> no I mean who is she?
[05:05] <thecha> like what's her name
[05:05] <antonio_> The woman I sleep with
[05:05] <thecha> tmi
[05:05] <antonio_> Pamela
[05:06] <thecha> can you tell Pam i said hi?
[05:06] <antonio_> um...sure I guess I can
[05:06] <thecha> thanks man
[05:07] <antonio_> she said hi
[05:07] <Latrodectus> antonio_: i'd say use gparted to check what kind of filesystem the storage drive is
[05:07] <thecha> ask her how she's been over the years
[05:07] <antonio_> "I remember him as one pump chump...ask him hows he doing"
[05:07] <jkskdn> Hello folks.  I'm trying to install (dual-booting) 14.04 w/ win8, and I keep getting the same error message.  So far I've been following all the community guides, but I'm wondering if I'm trying to install the bootloader to the wrong partition.  Will it cause a problem to set the target to dev/sda1, the EFI partition?
[05:08] <thecha> "still selfish with the love...otherwise good"
[05:09] <antonio_> haha...
[05:10] <Latrodectus> jkskdn: what's the error message?
[05:10] <antonio_> brb...
[05:10] <thecha> hb
[05:11] <jkskdn> Latrodectus, The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot.
[05:12] <jkskdn> latrodectus, so far I have sda6 partition for the linux install, and 5gb of swap, and I've been trying to mount the bootloader to sda6 as well
[05:12] <Latrodectus> jkskdn: did you verify that iso that you downloaded was intact?
[05:12] <Fahrenhe17> hey guys, i have a question, help me please. I found patch for synaptic touchpad (speed asymetrical (horizontal faster than vertical)), but dont know how to apply this for my system? Here is the patch http://patchwork.freedesktop.org/patch/12839/
[05:14] <jkskdn> latrodectus, using the "check disc for errors" from the grub (live) boot, it said it was okay.  I'll double-check the md5 now...
[05:15] <Latrodectus> Fahrenhe17: http://ubuntuforums.org/showthread.php?t=771087 but change the path's to match your patch...
[05:17] <Latrodectus> Fahrenhe17: so you would need to cd to the path of the file that you are patching, and then patch it with the file you downloaded
[05:18] <Fahrenhe17> Latrodectus: ty, i got it, but i dont know, what file i have to patch
[05:18] <Latrodectus> ah, give me a minute
[05:19] <Fahrenhe17> ty very much
[05:21] <Fahrenhe17> in usr/share/X11/xorg.conf.d/ i have only .conf files, i think, i dont think, that i'm on right way
[05:23] <Latrodectus> Fahrenhe17: i still haven't found the exact location but i found this: https://help.ubuntu.com/community/SynapticsTouchpad
[05:24] <Fahrenhe17> Thank u! I would read and try to fix everything! Ty again :)
[05:25] <jkskdn> latrodectus, still working on it...
[05:31] <slow_> http://paste.pound-python.org/show/cuOsa5X1l0zzKgAWFLWN/ can someone help w/ this?
[05:33] <jkskdn> latrodectus, md5sum is ok
[05:33] <slow_> hey
[05:34] <Latrodectus> slow_: http://ubuntuforums.org/showthread.php?t=1583028
[05:34] <Latrodectus> slow_: http://forums.openvpn.net/topic9208.html (newer)
[05:35] <Latrodectus> jkskdn: it halts during the install process right
[05:35] <jkskdn> yeah and then I get that error message saying the install failed
[05:36] <Latrodectus> jkskdn: can you try a different usb?
[05:37] <jkskdn> before I go down that route, can I ask - is there a standard way to pick a target for the bootloader?  the whole dev/sda?  The same as the rest of the linux install (sda6, in this case) ?
[05:38] <Latrodectus> jkskdn: there should be; because servers...
[05:39] <Latrodectus> jkskdn: idk but i found this... http://askubuntu.com/questions/126541/how-to-manually-install-boot-loader
[05:40] <Latrodectus> just be careful
[05:45] <jkskdn> Latrodectus, which solution were you proposing I follow?  I have seen the advice elsewhere to ry creating a small partition at the end of sda, but I didn't know if that should be merged with the efi
[05:46] <jkskdn> Latrodectus, I guess not  since I can't change the size of the efi partition, sda1
[05:49] <Latrodectus> jkskdn; info on efi partition https://en.wikipedia.org/wiki/EFI_System_partition (if you are into lite reading)
[05:50] <Latrodectus> jkskdn: are you replaceing an exsisting windows os?
[05:51] <Latrodectus> (did you disable secure boot and "quick start" (idk the name))
[05:51] <jkskdn> yes, definitely
[05:53] <jkskdn> latrodectus, not replacing, trying to dual boot
[05:54] <Latrodectus> well then idk
[05:54] <Latrodectus> sorry
[05:58] <jkskdn> latrodectus, do you think this sounds correct?  "In Linux, a single partition can be both a boot and a system partition if both /boot/ and root directory are in the same partition."
[05:59] <Latrodectus> jkskdn: that sounds legit
[05:59] <itai> Im trying to install something from the software center, and there is something that says Applying changes and the green loading bar doesn't seem to move. Is this normal?
[05:59] <Latrodectus> itai: how is your internet connection?
[05:59] <jkskdn> I think that does answer something important then.  I shouldn't need to send the bootloader to a different partition then...
[06:00] <Latrodectus> jkskdn: that would solve your problem, try it out
[06:00] <itai> Latrodectus: i think its alright, not the best
[06:01] <f0xtr0t-qwerty-k> hi everyone
[06:01] <jkskdn> I'll try, but that's precisely what I had been doing before I began looking for other options :p
[06:02] <Latrodectus> itai: what else are you doing on your pc while you are installing the software?
[06:02] <jkskdn> latrodectus - actually, I think intead I've figured out WHY it's failing, the way I've been trying...
[06:03] <Latrodectus> the more you know...
[06:03] <jkskdn> Latrodectus, it's because windows insists that there be a boot and a system partition, and so maybe I do have to cram the linux boot onto the part where the ms boot is already...
[06:04] <Latrodectus> jkskdn: that is what you normally have to do, and then you have to rebuild the windows bootloader
[06:04] <jkskdn> so I'm back to where I was in terms of trying to figure out if I aim my boot,oader for sda1 if it'll create massive problems.
[06:04] <itai> Latrodectus: I'm not doing anything else. What is the Applying changes mean
[06:04] <Latrodectus> itai: unpacking and cleaning up
[06:05] <slow_> Latrodectus: i'm still having the same problem, cant find a tutorial that helps
[06:05] <itai> Latrodectus: Does it usually takee a long time?
[06:07] <Latrodectus> itai: depending on the program and hardware it can take seconds to hours (hours is rare)
[06:08] <Latrodectus> slow_: what exactly are you trying to do?
[06:08] <slow_> Latrodectus: setup a VPN to connect to on my OVH vps on any choice of OS, i was trying w/ ubuntu and couldn't connect
[06:10] <Latrodectus> slow_: and you setup the group for the vpn right?
[06:11] <slow_> Latrodectus: when i try and setup via addgroup nogroup i get group already created
[06:11] <Abe> Is there a way to get a Pc controller working in Wine?
[06:13] <Abe> and does it only work with xbox360 controller
[06:14] <Latrodectus> slow_: did you bring down the computer's ethernet/wifi and then restart it?
[06:14] <jkskdn> Latrodectus, I see you're busy but I'd like your take on a page I just found when you have a second
[06:15] <jkskdn> Latrodectus, http://askubuntu.com/questions/219514/where-to-install-bootloader-when-installing-ubuntu-as-secondary-os
[06:15] <jkskdn> --- and check out these lines : "
[06:15] <jkskdn> 	
[06:15] <jkskdn> Here's an example that could help you out:
[06:15] <jkskdn> Installation type
[06:15] <jkskdn> Under "Device for boot loader installation":
[06:16] <Latrodectus> jkskdn: use a service like pastebin to paste more then 3 lines...
[06:17] <Latrodectus> jkskdn: you should read this https://help.ubuntu.com/community/WindowsDualBoot
[06:18] <f0xtr0t-qwerty-k> hi everyone i was hoping you could help me with something silly
[06:18] <Latrodectus> Abe: https://help.ubuntu.com/community/Xbox360Controller
[06:18] <f0xtr0t-qwerty-k> i have an ubuntu desktop which had some issues with lightdm
[06:19] <f0xtr0t-qwerty-k> which i thought was an opporutiny to move to gnome. So now i moved to gnome like a month ago but i just noticed that i can't change my wallpaper
[06:19] <f0xtr0t-qwerty-k> any ideas?
[06:19] <Latrodectus> Abe: http://wiredrevolution.com/ubuntu/setup-the-ps3-bluetooth-controller-on-ubuntu (ps3 controller)
[06:20] <f0xtr0t-qwerty-k> in the settings the image i set to be my wallpaper shows up in a small preview but my actual wallpaper doesn't change
[06:21] <Latrodectus> f0xtr0t-qwerty-k: try killing nautilus
[06:22] <jkskdn> Alright, going to try something else, thanks for the help
[06:23] <Latrodectus> jkskdn: np
[06:27] <Latrodectus> f0xtr0t-qwerty-k: also this might help http://askubuntu.com/questions/84130/how-do-i-theme-the-nautilus-background-image
[06:28] <Latrodectus> ^actually disregard that; i'm tired...
[06:28] <alexh> hi
[06:28] <f0xtr0t-qwerty-k> lol
[06:28] <Latrodectus> i know right...
[06:29] <f0xtr0t-qwerty-k> it's alright Latrodectus
[06:29] <f0xtr0t-qwerty-k> i understand
[06:30] <Abe> well I have an normal USB controller its actually Thrustmaster xD and it's working with Ps2 emulator fine just "Wine don't want to use it ingame
[06:31] <Abe> But I see the Controller in "wine control"
[06:34] <Abe> http://www0.xup.in/exec/ximg.php?fid=13597933 But not working ingame
[06:37] <Dirkson> Hey all. Not an ubuntu person, asking for a friend - He's running 14.04 and needs libprotobuf-c1, but can only find -c0. Any ideas for the easiest way to fix that?
[06:51] <em> can someone tell me tl;dr, I have LLDB, I've checked the official site, and just can't get it. So I type in the terminal lldb, then I'm guessing I'm in "lldb" mode because anything I type is within the lldb environment. So if I have a compiled C code called test.out, how do I debug it?
[06:53] <dav> hello
[06:57] <Guest72840> Hi, how can I try an icon pack on LiveUSB? I can install normal way because the ISO (I mean the LiveUSB) is read only
[07:01] <wileee> Guest72840, This from the ubuntu repos and you want kit there on a reboot?
[07:01] <wileee> it*
[07:02] <Guest72840> wileee: No it's from a website and I'd like to try without reboot.
[07:03] <wileee> Guest72840, should be something the software center can run, or you can unpack and use.
[07:03] <em> can someone tell me tl;dr, I have LLDB, I've checked the official site, and just can't get it. So I type in the terminal lldb, then I'm guessing I'm in "lldb" mode because anything I type is within the lldb environment. So if I have a compiled C code called test.out, how do I debug it?
[07:03] <em> anybody familiar with the LLDB debugger?
[07:03] <schultza> Having problems with my ubuntu wireless and intel 5100 card
[07:03] <schultza> will not stay connected
[07:04] <wileee> Guest72840, While running you can add to the OS, you just need a persistence setup to save it after shutting down.
[07:05] <Guest72840> I have 3000MB persistence set
[07:07] <Guest72840> wileee: I'm stupid I forget that I don't have to put in usr/share/icons I can put it in user/.icons as well which is writeable
[07:08] <schultza> I have an Intel Pro/Wireless 5100 AGN {Shiloh] on Ubuntu 14.04.3 Trusy Tahr and it will not stay connected. How do I fix this?
[07:11] <em> wtf
[07:11] <em> why is nobody helping
[07:11] <Miriana-Tor> Hello I am an Italian girl, and I love to do sex in all ways, visit my site http://mirianator.altervista.org/
[07:11] <em> such a simple question
[07:12] <baizon> em: well that isnt a ubuntu question, this is a lldb question
[07:13] <em> baizon: so where do I ask it? Besides, what debugger do people use? Ubuntu is just an oS.
[07:13] <em> LLDB used in ubuntu as well
[07:14] <auronandace> em: LLVM guys would know, find their channel
[07:14] <auronandace> !alis | em
[07:15] <Spider> !dualboot
[07:16] <em> hm... your alis didn't return anything for lldb
[07:16] <baizon> em: so youre asking wrong then
[07:16] <auronandace> em: it isn't my alis, LLDB is under the LLVM project
[07:16] <Spider> Hey guys. Can you do a dual boot from ubuntu, or do I have to install windows first and then Ubuntu?
[07:16] <em> baizon: I've given the parameters: alis list lldb
[07:17] <Spider> brb
[07:17] <baizon> em i got 6 results
[07:18] <em> baizon: yeah thanks, I'm already on their channel
[07:18] <baizon> em: ok nice
[07:41] <pmaxk> hi to all..
[07:42] <blb17497> oh, somebody alive, I thought something's wrong  with my irc client
[07:43] <pmaxk> me to..
[07:44] <pmaxk> how thinks going..?
[07:44] <baizon> !offtopic | pmaxk
[07:45] <Seveas> blb17497: it's an irc client, thus software, thus made of bugs. So there *is* something wrong with your IRC client :D
[07:45] <blb17497> I've written it myself
[07:46] <Seveas> so it'll have even more bugs :P
[07:46] <pmaxk> ubottu be polite....
[07:46] <Seveas> ubottu: please tell pmaxk about yourself
[07:50] <pmaxk> ubottu itesting an android irc client
[07:51] <pmaxk> so i can not. read...pm
[07:52] <pmaxk> anyway...bb to all
[07:52] <blb17497> best begards?
[07:56] <blb17497> no, it's best bishes
[08:12] <lallo> ciao
[08:12] <lallo> ki mi darebbe una mano
[08:21] <EW1LN> привет рускоязычным, если тут есть такие
[08:23] <quest9> ?
[08:26]  * salmoh 
[08:29] <EW1LN> !
[08:41] <baiquer> uit
[08:41] <TopGear> Hey guys, is there someone with a Dell Precision M4600 here?
[08:42] <Ben64> TopGear: ask your actual question
[08:44] <TopGear> Ben64, It's a rather specific question. I was wondering whether it is possible or not to turn off the Quadro card altogether in the BIOS, because Bumblebee doesn't really work with the card, so I have read.
[08:44] <Ben64> bumblebee is outdated, nvidia-prime is the way to go
[08:46] <TopGear> Ben64, It is? I wasn't aware of that at all. Here I am, faithfully installing Bumblebee on my Asus with a 540M, every time I mess up again -_- Thanks for the heads up, I've got some Googling to do.
[08:47] <Ben64> TopGear: its included with ubuntu now, it should automatically be installed if you have the internet connected during installation
[08:49] <TopGear> Ben64, Included since which version of Ubuntu is it included? 14.10?
[08:49] <Ben64> at least 14.04
[08:53] <TopGear> Ben64, That's odd. My laptop did not switch to the Intel-card automatically. It kept on using the nVidia card until I installed Bumblebee. I just checked my list of installed apps and nVidia-prime indeed was not installed.
[08:54] <cfhowlett> TopGear, I have Nvidia prime.  you must manually switch.  same for optimus perhaps.
[08:55] <TopGear> cfhowlett, That could very well be. I just read that installing nvidia-prime is as easy as "sudo apt-get install nvidia-346 nvidia-settings nvidia-prime". I can tell you, Bumblebee was way, way more work to get working in 15.04.
[08:55] <cfhowlett> it was indeed just that easy, TopGear.
[08:57] <TopGear> I feel so stupid now... Thanks for the heads up guys. This will probably make installing any Linux-distro with nvidia-prime in its repositories much easier.
[08:59] <roxlu> Hey! I've installed ubuntu server and the cmake package; but it installed vesrion 2.8 but that one in ancient. Why don't I get the latest cmake version?
[08:59] <cfhowlett> !newest | roxlu
[09:00] <MonkeyDust> cfhowlett  i was typing that, you're lightning fast!
[09:00] <roxlu> Lol okay :)
[09:00] <cfhowlett> MonkeyDust, it's all in the wrist, my friend.
[09:01] <roxlu> I'm wondering though, why I get cmake 3.x.x on another ubuntu install both based on ubuntu 14.04.3 LTS
[09:04] <TopGear> cfhowlett, Is there actually any real difference between nvidia-346 and nvidia-346-updates?
[09:04] <cfhowlett> TopGear, I've never read enough of the details to know.  gimme a minute
[09:08] <cfhowlett> TopGear, for what it's worth:  http://pastebin.ubuntu.com/12816081/   http://pastebin.ubuntu.com/12816083/
[09:13] <TopGear> cfhowlett, As far as I can see, there are no very big differences.
[09:13] <cfhowlett> TopGear, agreed.
[09:14] <TopGear> Explains why I didn't notice any difference. Thanks for the info!
[09:15] <cfhowlett> happy2help!  TopGear
[10:29] <zol> I have UFW enabled for port forwarding, but am trying to figure out how to allow incoming connections for Deluge on my router and forward them to my internal machine that is running the Deluge client. Anyone got any ideas how the command for ufw would look like? "sudo ufw allow from any port 6880:6890 to 10.0.0.46 port 6880:6890" ?
[10:32] <anonymous_tosaur> Hi there
[10:44] <b3NI> test
[10:44] <cfhowlett> !test | b3NI
[10:45] <b3NI> working :)
[10:49] <Banjooie> ...does anyone know an IRC channel where I might get help with Tinyfugue?
[10:50] <MonkeyDust> Banjooie  type /msg alis list blah
[10:50] <Banjooie> ...Which, regrettably, gives zero results.
[10:51] <Banjooie> I'm just having a bizarre issue ever since I changed out my laptop keyboard where it only accepts input for the first second it's plugged in, but no other program reports any issues with the keyboard.
[10:51] <Banjooie> Tinyfugue does, that is.
[10:52] <MonkeyDust> and what's tinyfugue?
[10:52] <Banjooie> It's a telnet client that runs in terminal.
[11:09] <guest-G6KJxx> PENE
[11:10] <guest-G6KJxx> TOECUATSDBFYGACDJVGSWEVGTYYGREFGYWG
[11:10] <MonkeyDust> guest-G6KJxx  this is ubuntu- support
[11:10] <guest-G6KJxx> hijos de puta que mierda seca es esta
[11:11]  * badbodh joins #test
[11:14] <kubast2> Hey ,how can I make android device work with adb ?
[11:15] <kubast2> Bus 002 Device 006: ID 2207:0010
[11:16] <MonkeyDust> kubast2  how is that ubuntu related?
[11:16] <kubast2> http://dpaste.com/27F5RYN
[11:17] <MonkeyDust> kubast2  this is ubuntu support, not android support
[11:17] <kubast2> ok
[11:32] <yellabs> hello all
[11:33] <yellabs> is there a channel for ubuntu phone ?
[11:33] <MonkeyDust> !phone
[11:34] <pmaxk> Hi to all...
[11:37] <pmaxk> anyone here....?
[11:37] <cfhowlett> !ask | pmaxk
[11:37] <MonkeyDust> pmaxk  this is ubuntu support, ask your question
[11:39] <pmaxk> Oh just testing my irc connection....
[11:40] <pmaxk> Sory..
[11:40] <Who4m1> hello
[11:42] <guntbert_> Who4m1: Do you have an ubuntu support question?
[11:43] <ibou> I read something about special repos for the LTS versions. Talking to someone?
[11:44] <paulpatta> !list
[11:44] <Ben64> ibou: what
[11:45] <ibou> Ben64: i dont remember where but i saw a list of special repos for LTS
[11:46] <MonkeyDust> ibou  what kind of special repos?
[11:48] <ibou> MonkeyDust: different adresses that the traditional ones for update security etc
[11:48] <ibou> MonkeyDust: different adresses than the traditional ones for update security etc
[11:49] <MonkeyDust> ibou  maybe this site helps you remember what you read ... https://help.ubuntu.com/community/Security
[11:49] <MonkeyDust> page*
[11:51] <anita_clem> Anyone knows why IN_DELETE_SELF doesn't work for incron?
[11:51] <ibou> MonkeyDust: nice website actually but not exactly what i'm talking about
[11:51] <anita_clem> Got the following in my incrontab
[11:52] <anita_clem> \/tmp\/test IN_DELETE_SELF echo "Test"
[11:52] <anita_clem> When removing /tmp/test I find nothing in syslog
[11:53] <anita_clem>  /tmp/test IN_DELETE_SELF echo "Test" I meant
[11:54] <OerHeks> ibou, never heard of 'special websites for security updates', i would not use it if there is no official info/wiki about it.
[11:54] <OerHeks> be carefull!
[11:54] <anita_clem>  /tmp/test IN_MODIFY echo "Test"
[11:54] <anita_clem> IN_MODIFY  is no problem
[11:56] <anita_clem> Got the following in my incrontab: /tmp/test IN_DELETE_SELF echo "Test"
[11:56] <anita_clem> Doesn't work for me ...
[11:56] <Who4m1> test
[11:57] <MonkeyDust> Who4m1  it works, we see you
[11:57] <inteus> rejoice
[11:58] <ibou> OerHeks: thank you
[12:05] <hd1> how do i restart torsocks?
[12:11] <hypermist> Got a Dead Island Bundle, Up for purchase 6$ NZD - Mass message to all chans
[12:14] <TopGear> hypermist, I don't think this is the right place for that.
[12:14] <hypermist> TopGear, it was a mass message to all my chans
[12:16] <hd1> TopGear: like they said "Mass message to all chans"
[12:20] <BluesKaj> Hiyas all
[12:22] <mjayk> Haya BluesKaj
[12:23] <BluesKaj> hey mjayk
[12:29] <thecha> can i access my cousins windows 7 homegroup from my ubuntu?
[12:29] <thecha> he is on a pc
[12:29] <thecha> I am on an Ubuntu
[12:31] <baizon> thecha: yes you can http://askubuntu.com/questions/33654/is-it-possible-for-ubuntu-to-talk-to-a-windows-7-homegroup
[12:31] <ubuntu009> I'm using ubuntu 14.04 and added this via crontab -e "@reboot sh /root/script.sh" but on reboot it doesn't seem to run, any ideas? the script is executable
[12:34] <MonkeyDust> ubuntu009  did you use sudo crontab -e ? notice sudo
[12:34] <ubuntu009> MonkeyDust: I'm logged in as root
[12:35] <MonkeyDust> sounds bad
[12:35] <ubuntu009> MonkeyDust: in /var/log/syslog I can see CRON[809]: (root) CMD (sh /root/script.sh) but the actual contents don't seem to run
[12:42] <_Crash_> How can I change the directory for an app i installed via apt-get after removing the app which I compiled via make install?
[12:43] <_Crash_> e.g if i run "test" in the terminal, it'll say "-bash: /usr/local/bin/test: No such file or directory" but it's in "usr/bin/" and needs correcting
[12:44] <nelozz> hey
[13:05] <Mobiesque> Hi, I just updated ubuntu 15.04 64bit including kernel update 3.19.0.30, now after booting from grub i get the kernel number and 'loading initial ramdisk' and my screen goes blank and loses signal with no further booting.
[13:06] <lotuspsychje> !recovery | Mobiesque
[13:10] <lotuspsychje> !one | argon181
[13:11] <argon181> ok
[13:11] <lotuspsychje> argon181: ask your question here mate, someone might still know
[13:12] <argon181> little qustion about ubuntu one: they stopped the service for desktop (cloudservice, backup and stuff) and i read, that you can get the server software free, but where?
[13:13] <teward> argon181: what do you mean by 'the server software'?  Ubuntu One service has been dead.
[13:13] <bazhang> argon181, server as in lamp?
[13:15] <argon181> like the programm you run on a server
[13:15] <bazhang> !lamp | argon181
[13:15] <bazhang> or just install the ubuntu server iso argon181
[13:16] <argon181> bazhang: is it included there?
[13:16] <bazhang> !server | argon181
[13:16] <bazhang> argon181, yes of course
[13:16] <bazhang> argon181, its a server, so all cli of course
[13:16] <argon181> ok, thanks :D
[13:17] <bazhang> argon181, if you need a minimal gui, you can add that later
[13:18] <coolomatics> i think argon181 wants to run an Ubuntu One server locally, right?
[13:19] <lotuspsychje> coolomatics: yeah i think thats his purpose
[13:20] <Altered_States> Hello, i'm having issues with using a dport to hdmi converter and was wondering if anybody is able to help. I'm not actually running true ubuntu, I'm using elementary os which is ubuntu based, however their chatroom seems dead
[13:21] <Altered_States> The issue is that the image is not displaying at native 1080p, the text seems very pixelated and things just look wrong
[13:26] <MonkeyDust> Altered_States  elementary is not supported here, type /j #elementary
[13:26] <Altered_States>  /j #elementary
[13:27] <coolomatics> i dont find any information how to setup an own Ubuntu One server, i suppose argon181 should look out for an active project foy syncing thing, e.g. owncloud
[13:27] <Altered_States> The elementary channel appears dead. I'm at a dead end which is why i'm asking here
[13:28] <Altered_States> My remaining option may to install ubuntu :D
[13:28] <MonkeyDust> Altered_States  tip: choose/use a distro that is better supported
[13:30] <Altered_States> I know... I installed it a few years ago to try out and then got stuck with it. I think this issue is to do with the general linux configuration rather than elementary or it could be the converter itself
[13:30] <Altered_States> THink it may be time to re-install
[13:30] <MonkeyDust> Altered_States  backup first
[13:31] <Altered_States> MonkeyDust, I'll DL a live distro and see if the issue is still apparent there
[13:42] <john_cephalopoda> Hey.
[13:47] <xaxa> could you tell me your output of $ ls -l /etc/hosts
[13:48] <xaxa> should the owner be root
[13:51] <DJones> xaxa: -rw-r--r-- 1 root root 221 Nov  8  2014 /etc/hosts
[13:52] <xaxa> thank you
[13:56] <babbl> I just installed Mate (how great!) and I checked the box to encrypt my personal data. Somehow, swap got encrypted, too, which would be finde, if it wouldn’t ask me to enter my passphrase while booting and while upgrading various packages. Isn’t swap normally encrypted with a random string generated on every boot sequence?
[13:58] <DJones> xaxa: That was on 15.04
[14:05] <tuxedo> hello
[14:06] <tuxedo> how can I install VB in 64x mode
[14:06] <tuxedo> to use 64x OS
[14:06] <guntbert_> tuxedo: VB?
[14:06] <tuxedo> Virtualbox
[14:06] <musca> vbox?
[14:07] <tuxedo> when I install VB
[14:07] <tuxedo> guive only 32 mode option
[14:07] <tuxedo> to use OS
[14:07] <musca> vbox needs hardware virtualization for x64 vms
[14:07] <guntbert_> tuxedo: vbox suport in #vbox, see what musca said
[14:08] <tuxedo> I gave this machines dell Inspiron 1525 intel core 2 duo
[14:08] <tuxedo> I have
[14:10] <tuxedo> how can i get that
[14:11] <musca> tuxedo: AMD processors provide the svm flag, intel has vmx (often disabled in BIOS)
[14:11] <musca> grep -Pwom1 's?vmx?' /proc/cpuinfo
[14:12] <tuxedo> ok
[14:12] <Guest39546> hello dear comunity... can someone give me a hint? I have to chek up if my machine have installed "pygtk" and "gtk"       "pyserial"  and   "librsvg2-common"... how i do this?
[14:13] <tuxedo> where can i get the info in the linux consele
[14:13] <musca> tuxedo:  grep -Pwom1 's?vmx?' /proc/cpuinfo
[14:14] <tuxedo> I did that but dont show nothing
[14:15] <tuxedo> I know if dont shot errors is ok
[14:15] <musca> so vmx is disabled or your cpu model misses this capability.
[14:15] <tuxedo> so i have to check on bios
[14:15] <Guest39546> also i tried to type the names on the terminal but it isnt a comand ^^ and on the ubuntu software center but nothing... i'm not so brave sorry
[14:15] <musca> tuxedo: we can check the cpu model
[14:16] <tuxedo> on linux console?
[14:16] <musca> tuxedo: grep -m1 'model name' /proc/cpuinfo
[14:17] <tuxedo> model name	: Intel(R) Core(TM)2 Duo CPU     T5800  @ 2.00GHz
[14:18] <Quatroking> Anybody know a good torrent client for debian with a webui and label support?
[14:18] <musca> tuxedo:  seems to miss the Intel® Virtualization Technology (VT-x) ‡  http://ark.intel.com/products/35581/Intel-Core2-Duo-Processor-T5800-2M-Cache-2_00-GHz-800-MHz-FSB
[14:20] <tuxedo> yes
[14:20] <tuxedo> dont virtualization tec
[14:21] <MonkeyDust> Quatroking  delage has a webui plugin
[14:21] <MonkeyDust> deluge*
[14:21] <imthenachoman> hey guys. lately when i do an apt-get upgrade i get a lot of prompts for user input. seems like it's doing a more and i have to press q to quit/continue. this is one of the ones i saw: http://paste.ubuntu.com/12819314/
[14:23] <hotmedal> I found an old USB stick that I think had a bad partition table so I nuked it with testdisk or something. It no longer shows up in gparted or testdisk when I connect it. This is the dmesg http://paste.ubuntu.com/12819167/
[14:26] <EriC^^> imthenachoman: looks like it's showing you the changelog
[14:26] <olai> hovden
[14:26] <imthenachoman> EriC^^: i saw this command online: sudo dpkg-reconfigure apt-listchanges. i used it to make it so i only get an email. i guess that should/would work?
[14:26] <EriC^^> imthenachoman: i think so, never used it myself
[14:27] <Guest39546> also how i get from the terminal the update for   "pygtk and gtk"   " pyserial"    l"ibrsvg2-common" so that if there are installed nothing apears and if not they will be installed... please
[14:27] <EriC^^> imthenachoman: type "type apt-get"
[14:27] <EriC^^> is it aliased to changelog or something?
[14:27] <Guest39546> also apt-get py
[14:27] <Guest39546> ?
[14:28] <imthenachoman> EriC^^: apt-get is /usr/bin/apt-get
[14:28] <EriC^^> imthenachoman: that looks fine
[14:28] <Guest39546> also  /usr/bin/apt-get py
[14:28] <imthenachoman> EriC^^: lets see if that changelog change i made fixes it
[14:28] <EriC^^> imthenachoman: try cat /etc/apt/apt.conf
[14:29] <imthenachoman> looks like apt-changelog was installed
[14:29] <Guest39546> is this message to me?
[14:29] <imthenachoman> Guest39546: sorry, no
[14:29] <EriC^^> Guest39546: no
[14:29] <imthenachoman> EriC^^: not a flie
[14:29] <EriC^^> imthenachoman: ok
[14:30] <EriC^^> imthenachoman: there's also /etc/apt/preferences.d/ and /etc/apt/apt.conf.d
[14:30] <raj1> hello anyone here knows about gmail hacking?
[14:30] <EriC^^> maybe some other program you installed wrote a config there so apt-get shows the changelog every time
[14:30] <imthenachoman> EriC^^: yeah, i think that is what apt-changelog does. i never installed it so i don't know
[14:30] <imthenachoman> i might uninstall later
[14:33] <raj1> hello
[14:33] <raj1> anyone here?
[14:33] <hotmedal> Sorry, I have bad internet so if someone replied to my message, please do again. I shall past it again:
[14:33] <hotmedal> I found an old USB stick that I think had a bad partition table so I nuked it with testdisk or something. It no longer shows up in gparted or testdisk when I connect it. This  is the dmesg http://paste.ubuntu.com/12819167/
[14:33] <Guest39546> hello dear comunity... can someone give me a hint? I have to chek up if my machine have installed "pygtk" and "gtk"       "pyserial"  and   "librsvg2-common"... how i do this?
[14:34] <Guest39546> so somple and so problematic ç.ç
[14:34] <MonkeyDust> Guest39546  apt-cache policy [package]
[14:34] <basheu> Hello people! :)
[14:34] <Guest39546> bellaaaaaa
[14:34] <basheu> Quick question regarding installing Ubuntu (or Kubuntu maybe?) for the first time in years.
[14:35] <basheu> I used to use Ubuntu and Kubuntu quite a bit through 2008 - 2010ish.
[14:35] <basheu> I noticed there would be a new Ubuntu coming out in a couple of days?
[14:35] <imthenachoman> EriC^^: thanks sir!
[14:35] <basheu> Should I just install the 15.04 now and update it somehow next week?
[14:35] <basheu> Is that going to break how much? :D
[14:36] <MonkeyDust> basheu  keep your question in one line
[14:36] <EriC^^> imthenachoman: np
[14:36] <basheu> kk
[14:36] <EriC^^> hotmedal: type sudo parted -l | nc termbin.com 9999
[14:36] <basheu> How hard is the upgrade from 15.04? And any good link going through the differences between Ubuntu and Kubuntu? Which one should I pick?
[14:36] <MonkeyDust> basheu  and in april, the new LTS will be released
[14:37] <EriC^^> basheu: if you want to use a new ubuntu just download the 15.10 straight away and keep upgrading as usual
[14:37] <EriC^^> basheu: or install the 14.04 lts and keep using it til the new lts comes out
[14:37] <hotmedal> EriC^^: http://termbin.com/4kbq
[14:38] <hamza> hello, i want to disable LVDS1(laptop) display permenantly, and use external monitor instead, the following works and frees up resources with the Intel driver: http://pastebin.com/tPy5HUvv but it does not work when i install the Nvidia driver
[14:38] <basheu> EriC^^: Can I already download the 15.10? Can only seem to find 15.04...
[14:38] <raj1> hello my 2 finger scrolling is not working... i searched in the internet but nothing works.. how can i solve it?
[14:38] <EriC^^> basheu: it should be in the daily current image or something
[14:38] <EriC^^> http://cdimage.ubuntu.com/daily-live/current/ basheu
[14:39] <hamza> my output is connected to Intel GPU
[14:39] <bashrc> is there any cdrom sized iso of ubuntu?
[14:39] <Guest39546> I know this question is for idiots XD but I have to chek up if my machine have installed "pygtk" and "gtk"       "pyserial"  and   "librsvg2-common"... how i do this?
[14:39] <EriC^^> basheu: just dist-upgrade as usual and you should have the same install as the official release in a couple days
[14:39] <Guest39546> can please someone say me how?
[14:40] <EriC^^> !mini | bashrc
[14:40] <Guest39546> i tried to instal it whit sudo apt-get pygtk but its wrong
[14:40] <bashrc> ubottu: thanks
[14:40] <basheu> EriC^^: I'm using windows atm and getting some new parts so moving to win 10 + Kubuntu dual boot at the same time. So I guess I'll just install the 15.04 and upgrade through that.
[14:40] <basheu> Thanks for the helps :)
[14:41] <hotmedal> Guest39546: sudo apt-get install <package>
[14:41] <EriC^^> basheu: lubuntu 14.04 can fit on a cd i think http://cdimage.ubuntu.com/lubuntu/releases/14.04.3/release/
[14:41] <Guest39546> 1000 thanks
[14:41] <basheu> EriC^^: I'll be installing through a USB drive most likely. No problems with image sizes there. :)
[14:41] <EriC^^> hotmedal: try sudo partprobe , then sudo cat /proc/partitions | nc termbin.com 9999
[14:42] <EriC^^> basheu: sorry, wrong nick highlight :)
[14:42] <EriC^^> bashrc: lubuntu 14.04 can fit on a cd i think http://cdimage.ubuntu.com/lubuntu/releases/14.04.3/release/
[14:42] <hotmedal> EriC^^: is partprobe supposed to return nothing?
[14:42] <EriC^^> hotmedal: yeah
[14:42] <Guest39546> hotmedal:  impossible to find the package pygtk
[14:42] <basheu> EriC^^: np, thanks for all the help. Will be looking forward to using ubuntu again for the first time in 5ish years!
[14:42] <hotmedal> EriC^^: http://termbin.com/ra0f
[14:43] <Guest39546> also sorry i have to chek up if "pygtk" and "gtk"       "pyserial"  and   "librsvg2-common are installed
[14:43] <EriC^^> basheu: np, enjoy :)
[14:43] <hotmedal> Guest39546: you need to add the repository that has that package and you need to make sure those are the right nmes
[14:43] <hotmedal> Guest39546: Names*
[14:44] <Guest39546> are this packages included in ubuntu studio?
[14:45] <Guest39546> also  "pygtk" and "gtk"       "pyserial"  and   "librsvg2-common"
[14:45] <hotmedal> Guest39546: what are you really trying to do?
[14:45] <Guest39546> trying to draw whit artcut
[14:46] <EriC^^> hotmedal: no idea
[14:46] <Guest39546> maybe i come again if I have some oder questions
[14:46] <hotmedal> EriC^^: My conclusion exactly lol. Could it be hardware?
[14:47] <EriC^^> hotmedal: i dunno really
[14:47] <nyan_cat> I've just installed ubuntu 15.10 and I'm having an issue with my wireless.
[14:48] <nyan_cat> It connects just fine and works while browsing, but when I try to download a lot of stuff such as updates it disconnects from my network and I have to disable it and then re-enable it
[14:48] <EriC^^> hotmedal: did you try it on a different pc maybe?
[14:48] <nyan_cat> this is the output of lspci on my laptop: http://paste.ubuntu.com/12819771/
[14:48] <hotmedal> EriC^^: not in ages. But I remember it not showing up back then either
[14:48] <MonkeyDust> wily | nyan_cat
[14:48] <nyan_cat> it worked fine in both windows and 14.04
[14:48] <MonkeyDust> !wily | nyan_cat
[14:51] <pepijndevos> I am running Jack, but now other sound does not work anymore. If I play a HTML5 video in Firefox I hear nothing. How can I hear both Jack and Alsa sound?
[14:52] <raj1> hello my 2 finger scrolling is not working how can i solve it ? anyone knows?
[14:53] <gshukla> Hi, I want to contribute to ubuntu and I don't know where to begin, I tried joining #ubuntu-beginners-dev but that was forwarded to #ubuntu. So it would be great if someone here could direct me to some other channel or resources
[14:54] <pepijndevos> gshukla: the bug tracker? Mailing list? Just guessing.
[14:55] <MonkeyDust> gshukla  start here https://wiki.ubuntu.com/ContributeToUbuntu
 I've already read that and decided to cntribute by fixing bugs
[14:57] <gshukla> but I can't find some beginer level bugs
[14:57] <MonkeyDust> gshukla  on launchpad.net
[15:03] <boxmein> fn+left tells my laptop to swap the screen configuration
[15:03] <boxmein> in a cycle
[15:03] <fsfman> Hello
[15:04] <boxmein> eg fn+left once, my main screen scales to 1024x768 and my fake "other" screen is turned on too, then I fn+left again and my main screen turns off while the fake "other" screen is on, then I fn+left again and the main screen turns on and the "other" screen turns off
[15:04] <boxmein> the "other" screen being my vga port
[15:04] <Liza> please someone suggest me any windows like DE in Ubuntu 14.04 LTE
[15:04] <boxmein> Liza: kde?
[15:04] <boxmein> Liza: that sorta was kde's original purpose
[15:05] <Liza> how can i installed it?
[15:05] <fsfman> How do I disable manual login in Xubuntu.There seems to be forum post for that.All I get is for enabling it
[15:05] <fsfman> Liza:sudo apt-get install kubuntu-desktop
[15:07] <Liza> thank you guys... lets try
[15:07] <MonkeyDust> Liza  cinnamon also has a menu below left
[15:08] <MonkeyDust> oh, cinnamon is not yet in the 14.04 repos
[15:08] <x00e> hello guys. currently running on 14.10 and I`m having lots of issues with repositories (http://paste.ubuntu.com/12820290/). anyone having any idea on what could be wrong ?
[15:08] <auronandace> x00e: it is end of life
[15:09] <auronandace> !14.10 | x00e
[15:09] <x00e> oh
[15:09] <x00e> damn :)
[15:09] <x00e> ok auronandace , thanks you
[15:09] <MonkeyDust> x00e  it's because 14.10 is dead, you're playing with a corpse
[15:09] <x00e> haha. so poetic :D
[15:10] <MonkeyDust> (halloween is 2 weeks away)
[15:11] <fsfman> How do I disable manual login in Xubuntu.There seems to be forum post for that.All I get is for enabling it
[15:12] <x00e> apparently is so dead, dist-upgrade dosn`t work anymore :D
[15:12] <x00e> haha
[15:12] <x00e> can I donwload 15.4 and upgrade from live iso ?
[15:12] <auronandace> !dist-upgrade | x00e
[15:12] <x00e> !upgrade
[15:12] <argon181> x00e: should work
[15:13] <MonkeyDust> x00e  backup and fresh install is easier, i guess
[15:13] <fsfman> Can someone help me.I want to disable manual login in lightdm-gtk-greeter
[15:14] <fsfman> But its enabled by default
[15:14] <fsfman> I tried allow-manual-login=false
[15:14] <x00e> MonkeyDust, meh. to many configs to move over & such
[15:14] <fsfman> But it did'nt work
[15:15] <Codmadnesspro> How can I reopen a window I closed from x11 forwarding in ssh?
[15:15] <MonkeyDust> x00e  then backup /etc/ too
[15:15] <Liza> how can i delete one respositories ?
[15:17] <fsfman> If you delete a repol all the packages associated with it will go
[15:17] <fsfman> If you want a minimal kde
[15:17] <fsfman> just type apt-get install --no-install-recommends kubuntu-desktop
[15:18] <fsfman> I think cinnamon is a better Windows clone
[15:18] <Liza> what do you min by minimal kde?
[15:18] <ruben_> wassup
[15:18] <ruben_> everybody in the house put your hand in the air
[15:18] <fsfman> No unwanted packages like gimp,ekiga which are not needed any way
[15:18] <Liza> @fsfman cinnamon installing :)
[15:19] <fsfman> ]Anyway I think neither Cinnamon nor Kde look anything like Windows.Classic windows look has a lot of changes from 8 onwards
[15:20] <fsfman> The closest one I can get to a similar interface is Gnome but more annoying to use.
[15:21] <kasjd> I used to use $i in here but that prints the whole path https://gist.github.com/hadifarnoud/528ca480ddde6036bf7a
[15:22] <fsfman> I wonder why Windows did'nt ditch their metro shit for Windows 10
[15:22] <fsfman> Some one tell me how to disable manual login in Xubuntu
[15:22] <fsfman> I checked the Xubuntu channel its dead
[15:23] <SchrodingersScat> fsfman: tried setings > users and groups > then the password setting for your account?
[15:25] <fsfman> No thereSchrodingersCat:There is no option to disable Manual Login
[15:26] <fsfman> I dont want to delete a account
[15:26] <fsfman> I want to disable manual login
[15:27] <lotuspsychje> fsfman: enable automatic login?
[15:28] <fsfman> No disable the 'Others' option in lightdm
[15:28] <lotuspsychje> fsfman: ah you have to tweak lightdm for that
[15:29] <lotuspsychje> fsfman: do you mean no guests account?
[15:29] <fsfman> As I said there seems to be no way to do that in gtk greeter
[15:29] <fsfman> No 'others' in gtk-greeter
[15:29] <fsfman> Not in unity greeter
[15:30] <lotuspsychje> fsfman: wich ubuntu version are you on?
[15:30] <fsfman> Xubuntu.It uses Lightdm
[15:30] <fsfman> gtk version
[15:30] <lotuspsychje> fsfman: try the #xubuntu guys, they might help you faster
[15:30] <Dumle29> Hmm I just put in an SD card from my RPi into my PC, and even though I've removed it now, sdg1 and sdg2 is not disspearing from /dev/
[15:30] <fsfman> Xubuntu seems to be dead.OK I will try
[15:31] <EriC^^> Dumle29: try sudo partprobe
[15:31] <Dumle29> It's still there
[15:32] <Dumle29> If I try to mount it it says "Unable to access volume An operation is already pending"
[15:33] <lotuspsychje> Dumle29: how about after a reboot?
[15:34] <Dumle29> lotuspsychje: Haven't tried that. I don't assume it'll be an issue, but do I really have to reboot after inserting and removing an SD card?
[15:34] <EriC^^> Dumle29: i think you didn't unmount it properly, where was it mounted? type df -h
[15:34] <alian> Hello!
[15:35] <lotuspsychje> alian: welcome, how can we help you?
[15:35] <Dumle29> EriC^^: Probaly didn't unmount it propperly no. I just pulled it out, though I didn't write to nor read from it
[15:36] <EriC^^> Dumle29: you should always use sudo umount /mountpoint to unmount it
[15:36] <EriC^^> anyways type df -h and get the mountpoint
[15:36] <Dumle29> EriC^^: This is the output from that command: http://paste.ubuntu.com/12821131/
[15:37] <EriC^^> Dumle29: is that it? /dev/sdc5 ?
[15:37] <Dumle29> EriC^^: Nope. It'd be sdg 1 and 2
[15:37] <EriC^^> Dumle29: type sudo lsblk -f
[15:37] <Dumle29> EriC^^: It doesn't lis sdg
[15:38] <Dumle29> list*
[15:38] <EriC^^> where does it list sdg?
[15:38] <Dumle29> in ls /dev/
[15:38] <EriC^^> does it list it in /proc/partitions ?
[15:38] <Dumle29> EriC^^: And here: http://i.imgur.com/7kokYCi.png
[15:39] <Dumle29> EriC^^: Nope. not in /proc/partitions
[15:39] <Dumle29> EriC^^: In that image. Those two are the trouble makers
[15:39] <lotuspsychje> Dumle29: is your device inside your pc now?
[15:39] <Dumle29> lotuspsychje: Nope, and the usb-multicard reader is off as well
[15:40] <EriC^^> Dumle29: try gvfs-mount --list
[15:40] <Dumle29> EriC^^: Yeah I see it there
[15:40] <Dumle29> EriC^^: Drive 5
[15:41] <mikayil> Bonjour
[15:41] <lotuspsychje> !fr | mikayil
[15:41] <Dumle29> EriC^^: http://paste.ubuntu.com/12821292/
[15:43] <fractal618> How can I restore the notifications in Lubuntu ( I clicked "do not display this again" when it told me my wifi disconnected)  any nm-applet gurus?
[15:45] <lotuspsychje> fractal618: maybe the #lubuntu guys might know?
[15:45] <fractal618> thanks
[15:45] <s1dr0> hola a toc
[15:45] <EriC^^> fractal618: try gsettings list-recursively | grep wireless
[15:45] <EriC^^> Dumle29: it doesn't look like its mounted there
[15:45] <fractal618> cool, thanks EriC^^
[15:46] <lotuspsychje> !es | s1dr0
[15:46] <EriC^^> Dumle29: what happens if you type gvfs-mount mount -d /dev/sdg1 ?
[15:46] <EriC^^> fractal618: does it say true or false at the end?
[15:46] <Dumle29> EriC^^: It isn't mounted, but it's shown in the file browser. and if I put it back in the PC and try to access it I get that "pending" error
[15:47] <Dumle29> EriC^^: With or without the media in the PC?
[15:47] <ggherdov> Hello. Is there a page that explains what to do after installing the linux-image-{server, generic} package to have the new kernel up and running? Last time I did it I had to do some grub configuration, but I forgot the details.
[15:47] <lotuspsychje> !kernel | ggherdov
[15:48] <alian> Who can tell me how to use the HMCL-2.1.9.sh sh
[15:49] <ggherdov> lotuspsychje: are you sure that message is appropriate to me? I am not compiling the kernel from sources, just installing the binary with the meta-package linux-image-server.
[15:50] <Dumle29> EriC^^: I get: "Error mounting /dev/sdg1: An operation is already pending"
[15:51] <pseudonymous> So I'm trying to get a broadcom 4360 chip on 15.10 (beta2) - I read that for 15.04 one could download the firmware and after dumping it in /lib/firmware/brcrm things should work, I still don't see my broadcom card in the list from "ip addr" though.
[15:52] <peter___> Hi
[15:52] <peter___> can you explain this problem: http://ubuntuforums.org/showthread.php?t=2299088 ?
[15:52] <lotuspsychje> pseudonymous: #ununtu+1 for wily issues mate
[15:53] <lotuspsychje> pseudonymous: #ubuntu+1 sorry
[15:58] <pseudonymous> Anyone using a broadcom 4360 in 15.04 ?
[15:59] <OerHeks> pseudonymous, macbook, is it?
[16:00] <pseudonymous> OerHeks: yes
[16:02] <OerHeks> is this a wireless AC thing? i read somewhere those are OOTB supported in 15.10  .. solution untill then was trottle back to 54 mbit
[16:02] <OerHeks> so.. crossposting in the channel you should be .. good luck
[16:03] <C_minus> once I was here looking for help - TJ gave me a shell command to run, from which he diagnosed that me and my neighbour's router are occupying the same freq band, and so we're having trouble connecting here. Does anyboy know what command that would be?
[16:03] <CIclops> hi .. running 14.04LTS here and wanting to install a package called libqt5websockets5-dev  .. synaptic can't find it, where would it be?
[16:04] <lotuspsychje> !find libqt5websockets5-dev
[16:04] <CIclops> ooh :)
[16:04] <lotuspsychje> !info libqt5websockets5-dev | CIclops
[16:05] <auronandace> !find libqt5websockets5-dev trusty
[16:05] <CIclops> can i use the one from vivid?
[16:06] <auronandace> CIclops: no, you should never mix packages from different releases
[16:06] <CIclops> k
[16:06] <CIclops> so i am stuck unless i inssall vivid?
[16:06] <lotuspsychje> !pinning | CIclops for more advanced tuning
[16:08] <Anaunymau5> hi
[16:08] <CIclops> thx auronandace .. reading
[16:10] <Tamwyn> Heyho, I have a little problem with my new laptop: it has no keys for next song previous song toggle play/pause, I have some special keys free and have their key events called from xorg. The only thing I have to do is know tell xfce what should happen on press. But is there a general command for this?
[16:10] <Tamwyn> For example to use with rhythmbox or spotify
[16:14] <Mion> Tamwyn: bind them to XF86Audio*
[16:15] <Mion> this is even on the wiki
[16:15] <Mion> sure it doesn't have some Fn combo for that though?
[16:15] <Mion> havn't seen a single laptop that doesn't
[16:19] <ornisht> hey guys
[16:21] <Tamwyn> Mion: L450, I can't find this keys on the keyboard
[16:25] <Tamwyn> Mion: http://www.notebookcheck.com/fileadmin/Notebooks/Lenovo/Thinkpad_L450_20DS0001GE/Lenovo_Thinkpad_L450_Eingabe.jpg
[16:26] <Mion> Fn-arrow keys usually work
[16:26] <SemiNus> hi
[16:26] <SemiNus> I have got a problem
[16:26] <SemiNus> apt-get does not find the servers any more
[16:27] <Mion> SemiNus: lsb-release -r
[16:27] <peter___> what is a safe way to remove multiple directories in Ubuntu?
[16:27] <Mion> SemiNus: </etc/lsb-release
[16:27] <Mion> peter___: rm
[16:27] <auronandace> SemiNus: tell me you are not running 14.10
[16:27] <Mion> peter___: same as in any other distro
[16:27] <peter___> Mion: rm -rf * ?
[16:27] <Mion> peter___: or find -delete if you need fancy filtering
[16:27] <peter___> Mion: being in the directory whose contents I want to delete, that is
[16:28] <SemiNus> it's 14.10
[16:28] <SemiNus> utopic
[16:28] <peter___> Mion: isn't rm unsafe (symlinks and such) ?
[16:28] <auronandace> !14.10 | SemiNus
[16:28] <auronandace> SemiNus: use a supported release
[16:28] <MonkeyDust> SemiNus  14.10 is dead
[16:28] <SemiNus> what the heck
[16:28] <Mion> peter___: define "unsane"
[16:29] <SemiNus> normally releases work way longer
[16:29] <SemiNus> what happened?
[16:29] <Mion> peter___: if you rm a symlink it only deletes the link, it doesn't delete the target
[16:29] <peter___> Mion: always?
[16:29] <SemiNus> only 1 year of support?!
[16:29] <Codmadnesspro> because 15.04 is better
[16:29] <Codmadnesspro> lol
[16:29] <Mion> peter___: unless you tell it otherwise, yes
[16:29] <auronandace> SemiNus: 9 months support for normal, 5 years for lts
[16:29] <SemiNus> Codmadnesspro, do you have any idea how much stress it is to set up the whole system until it fits my needs?
[16:29] <peter___> Mion: does it work this way in all Unixes?
[16:29] <Mion> peter___: if paranoid, use -i
[16:29] <SemiNus> is there no way around?
[16:30] <SemiNus> I only need php5-curl
[16:30] <Mion> peter___: in anything that follows posix
[16:30] <SemiNus> and hugin 2015
[16:30] <Mion> peter___: GNU is Not Unix
[16:30] <smallfoot-> Can you put Chromium 46 in Ubuntu!!
[16:30] <Codmadnesspro> SemiNus, shouldn't be that much trouble upgrading?
[16:30] <SemiNus> Codmadnesspro, it is....  until now,  NEVER ever any  dist upgrade worked for me
[16:31] <lotuspsychje> !latest | smallfoot-
[16:31] <SemiNus> so I always have to do a full backup
[16:31] <SemiNus> and install it from new
[16:31] <SemiNus> with all the servers and the whole test environment
[16:31] <lotuspsychje> SemiNus: if you want longer support use LTS as auronandace suggested
[16:31] <SemiNus> Can I use Ubuntu as a rolling release like if I'd go with the testing tribe of Debian?
[16:31] <Mion> peter___: you can also use rmdir
[16:32] <auronandace> SemiNus: if you want rolling release then you don't want ubuntu
[16:32] <Codmadnesspro> SemiNus, I've upgraded from 12.04 to 14.04 and then to 15.04 it worked so not sure why
[16:32] <Codmadnesspro> ubuntu masterrace
[16:33] <SemiNus> where can I learn if the lastest version of Ubuntu supports hugin 2015 ?
[16:35] <lotuspsychje> !info hugin wily | SemiNus
[16:35] <SemiNus> nice
[16:35] <SemiNus> thx
[16:35] <SemiNus> Ok I will try to run a dist upgrade now
[16:35] <SemiNus> say a prayer for me
[16:35] <lotuspsychje> SemiNus: thats on 15.10 right
[16:35] <lotuspsychje> SemiNus: not officially out yet
[16:35] <SemiNus> oh
[16:36] <lotuspsychje> !wily | SemiNus
[16:38] <dhia> i want to make an online virtual machine with apache server
[16:38] <dhia> who can help me ??
[16:38] <lotuspsychje> dhia: maybe the #ubuntu-server guys might point you better?
[16:38] <dhia> ok thanks :D
[16:40] <Tamwyn> The Xmodmap fixed the rpoblem
[16:43] <SemiNus> lotuspsychje, thank you very much for your help!
[16:43] <SemiNus> also auronandace, thank you!
[16:43] <lotuspsychje> SemiNus: no sweat mate, few days patience :p
[16:45] <linocisco> hi all , any Ruby on Rails developers? what books or reference do you use? I am newbie of programming
[16:46] <lotuspsychje> linocisco: maybe the ##programming channel is a good start for you?
[16:46] <linocisco> lotuspsychje, I am looking for advice from ubuntu user who is doing Ruby on Rails.
[16:47] <linocisco> lotuspsychje, i dont want from centos or Redhat or Gentoo user.
[16:47] <lotuspsychje> linocisco: its better when you ask specific ubuntu issues here
[16:48] <linocisco> lotuspsychje, there are specific tasks or packages to be installed especially for ubuntu users. It is different from other linux users
[16:48] <linocisco> lotuspsychje, sorry.
[16:48] <lotuspsychje> linocisco: try to start your setup, and see if you hit problems then come back asking your issues
[16:49] <amontalenti> Where is the best place to put a script that I want to run upon resume from swsusp on Ubuntu 14.04. I have tried a bunch of options but none seem to work. I want to run the script "as late as possible", that is, right before my login screen shows.
[16:52] <Quatroking> anybody know a good torrent client with a webuit that supports labels?
[16:52] <Quatroking> webui*
[16:53] <Quatroking> qbittorrent and deluge both lack this :(
[16:54] <SchrodingersScat> Quatroking: a quick search led me to believe that rutorrent/rtorrent can have this feature added
[16:54] <Quatroking> I don't remember rutorrent having labels in its webui
[16:54] <Quatroking> eh, doesn't hurt to try
[16:54] <lotuspsychje> !torrent | Quatroking
[16:54] <SchrodingersScat> Quatroking: because it has to be added, https://code.google.com/p/rutorrent-tadd-labels/
[16:54] <MonkeyDust> Quatroking  is there any app on any os that has that option?
[16:55] <Huck777> Quatroking: deluge and rutorrent supports labels
[16:55] <SchrodingersScat> or maybe it's already default, wouldn't know
[16:55] <Quatroking> MonkeyDust, utorrent on windows supports labels in the webui by default
[16:55] <Quatroking> SchrodingersScat, thanks, I'll look into that
[16:55] <Quatroking> Huck777, deluge doesn't support labels in the webui
[16:55] <Quatroking> only in the desktop gui
[16:56] <Huck777> Quatroking: I'm using the deluge-web ui with labels. i think the version you are using is too old. afaik there are ppa for deluge
[16:56] <Quatroking> oh?
[16:56] <Gh0st-> I want to upgrade ubuntu 13 to 14.04
[16:56] <lotuspsychje> !eolupgrade | gh0st
[16:57] <Huck777> Quatroking: take a look at that image https://linuxpluse.files.wordpress.com/2013/04/deluge.png
[16:57] <MonkeyDust> Gh0st-  backup and fresh install 14.04
[16:57] <Quatroking> that's odd, my webui says 1.3.10
[16:57] <Gh0st-> I am on Bootabel Ubuntu at the moment and trying to install whilst keeping the windows unaffected
[16:57] <Quatroking> oh
[16:57] <Quatroking> OH
[16:57] <Huck777> Quatroking: can you see the "label" ?
[16:57] <Quatroking> Huck777, I never noticed the label filter bar
[16:57] <Quatroking> hahaha
[16:57] <Huck777> :)
[16:57] <Quatroking> thanks
[16:57] <Huck777> have fun
[16:58] <Gh0st-> how can I take a screenshot on ubuntu so I can share here ?
[16:58] <Quatroking> Huck777, I don't suppose if you know how I can add torrents to labels/create new labels in the webui?
[16:58] <Quatroking> I'm not seeing it anywhere in the rightclick menus
[16:59] <Gh0st-> ?
[16:59] <Gh0st-> anyone
[16:59] <BluesKaj> Gh0st-, prtscn key
[16:59] <Gh0st-> BluesKaj: ok cool
[16:59] <Gh0st-> let me show you guys
[17:00] <Huck777> Quatroking: what os and deluge version are you running?
[17:00] <BluesKaj> you have to paste the screen pic in imagebin or imgur, Gh0st-
[17:01] <Quatroking> don't tell anyone but I'm actually running debian 8.2, with deluge 1.3.10
[17:01] <lotuspsychje> !info deluge
[17:01] <Gh0st-> https://usercontent.irccloud-cdn.com/file/sraS9D7K/Screenshot%20from%202015-10-17%2016%3A59%3A41.png
[17:01] <Quatroking> I just come to this channel instead because loads more responsive and pretty much works the same
[17:01] <Gh0st-> BluesKaj: how about this?
[17:01] <Huck777> Quatroking: i'm running the same setup on my debian vm
[17:02] <jason__> Quatroking, the trick to not telling anyone is to not tell anyone
[17:02] <Gh0st-> first thing is, my PC is on Windows 10 and not on 7 anymore
[17:02] <Quatroking> jason__, i never told anything
[17:02] <Quatroking> you're just hallucination
[17:02] <Quatroking> ting
[17:02] <Quatroking> hallucinationting
[17:03] <Gh0st-> second thing is I have installed a second hard drive and wants to install ubuntu on it from scratch
[17:03] <Quatroking> Huck777, so with your setup you can add labels in the webui?
[17:03] <Gh0st-> :)
[17:03] <Quatroking> I'm only seeing options for it in the desktop gui
[17:03] <lotuspsychje> gh0st: erase w10 once and for good and install ubuntu single for an easy life
[17:04] <Huck777> Quatroking: one sec... i have to start my desktop... usually i auto-create the labels with flexget
[17:04] <BluesKaj> Gh0st-, have you made a partition for ubuntu pevious to running the installation?
[17:04] <Gh0st-> BluesKaj: yes I did
[17:04] <Gh0st-> lotuspsychje: not an option because my wife uses windows 10 :(
[17:05] <Gh0st-> BluesKaj: want to have a look?
[17:05] <lotuspsychje> gh0st: learn her the beauty of ubuntu :p
[17:05] <BluesKaj> so choose "something else" and install Ubuntu to the partition you created, it will show in the partition table
[17:05] <BluesKaj> Gh0st-,^
[17:06] <Gh0st-> https://usercontent.irccloud-cdn.com/file/yIuKUJMw/Screenshot%20from%202015-10-17%2017%3A05%3A52.png
[17:06] <Gh0st-> BluesKaj: have a look
[17:07] <Gh0st-> this is what I get when I choose something else
[17:07] <BluesKaj> you don't have ann ext4 partition for ubuntu there
[17:08] <Gh0st-> how can I show you the complete list here?
[17:08] <BluesKaj> ok already installed, missed that the first look
[17:08] <Gh0st-> part -l something ? isn't it?
[17:09] <berz3rk> OK, so Im using Ubuntu 15.10, and I have a really odd error... I installed the nvidia drivers for my gtx 860m optimus setup, and than restarted my system. the ubuntu desktop was completly black, but volume keys worked (so it was actually in the desktop!), after I waited some time nothing happened. I switched to another TTY, switched back and forth, clicked some keys on my keyboard/ mouse clicks on TTY F7 (desktop) and than at some poi
[17:09] <berz3rk> I dont know how to identify the issue
[17:09] <Gh0st-> yeah Ubuntu 13 is already installed
[17:09] <berz3rk> Im right now in the desktop, everything works great, but every reboot this mess is making me feel bad
[17:10] <BluesKaj> are you going to install 14.04 ?
[17:10] <BluesKaj> Gh0st-,^
[17:10] <Gh0st-> BluesKaj: yes
[17:10] <lotuspsychje> berz3rk: #ubuntu+1 for wily issues please
[17:11] <Bashing-om> berz3rk: Support for 15.10 is in #ubuntu+1 .
[17:12] <BluesKaj> Gh0st-, you can preserve your data if you do an internet release-upgrade to 14,04 , otherwise you'll lose al your data on 13.10
[17:13] <Gh0st-> BluesKaj: dont have any data on Ubuntu partition
[17:13] <Gh0st-> BluesKaj: just want to preserve what's on other partitions and windows boot
[17:14] <Gh0st-> BluesKaj:  I am waiting for directions from you BTW
[17:14] <Gh0st-> :)
[17:14] <BluesKaj> then choose the ext4 partition and install 14.04 to it
[17:14] <Gh0st-> BluesKaj: do appreciate your help
[17:15] <Gh0st-> BluesKaj: where and how?
[17:15] <user1__> Hi
[17:16] <BluesKaj> click on change after choosing the ext4 partition then choose ext4 in the list and / as the mountpoint
[17:16] <BluesKaj> Gh0st-,
[17:16] <Huck777> Quatroking: right click on "No Label" and press "Add Label"
[17:16] <Gh0st-> BluesKaj: ok
[17:16] <user1__> I used a .vmdk in virtualbox. Looks like vbox recognized it but the screen is blank. What might be the reason?
[17:16] <Gh0st-> BluesKaj: this will allow meto have dual boot right?
[17:16] <Gh0st-> me to*
[17:16] <BluesKaj> yes
[17:16] <Quatroking> Huck777, in the webui?
[17:16] <Quatroking> I'm not seeing "No Label" anywhere
[17:17] <Huck777> Quatroking: click on the label group
[17:17] <lotuspsychje> user1__: maybe the #vbox guys might know?
[17:17] <Gh0st-> BluesKaj: /boot?
[17:18] <Quatroking> Huck777, yeah, that's in the desktop ui
[17:18] <BluesKaj> no just /
[17:18] <Gh0st-> BluesKaj: sorry typo.. should I also format the partition?
[17:18] <Huck777> Quatroking: i never used the desktop ui version... only the web-ui
[17:18] <Quatroking> whaat
[17:18] <Quatroking> screenshot?
[17:18] <BluesKaj> Gh0st-, yes format
[17:19] <user1__> lotuspsychje,  how can I install vmware on ubuntu?
[17:19] <lotuspsychje> !info virtualbox | user1__
[17:19] <user1__> lotuspsychje,  vmware. not vbox
[17:20] <Gh0st-> BluesKaj: installation withouth swap space is ok?
[17:20] <lotuspsychje> user1__: https://help.ubuntu.com/community/VMware
[17:20] <Quatroking> Huck777, nevermind, it's working
[17:20] <Quatroking> I restarted deluge and that worked
[17:20] <BluesKaj> Gh0st-, myes you can add a swap file later
[17:20] <Huck777> Quatroking: i see :D
[17:20] <Quatroking> should've done that earlier, ugh
[17:22] <OerHeks> user1__, download the player from their site, https://help.ubuntu.com/community/VMware/Player but it is not supported here.
[17:23] <BluesKaj> Gh0st-, how much RAM do you have?
[17:24] <Gh0st-> BluesKaj: 6 gb
[17:24] <user1__> can vbox and vmware both do hardware vitualization?
[17:24] <BluesKaj> you probly won't need a swap file Gh0st-
[17:25] <OerHeks> user1__, vbox does not. for vmware support, see the last lines in that url.
[17:25] <user1__> OerHeks,  hm
[17:25] <Gh0st-> what does ext4 means?
[17:25] <Gh0st-> BluesKaj:  that is great then
[17:26] <user1__> OerHeks,  it tells about support. but either way, does vmware support hardware virtualization?
[17:27] <OerHeks> user1__, stop asking about vmware, we do not support that.
[17:27] <jason__> Why would you not have swap? The consequences of running out of memory are pretty bad.
[17:27] <OerHeks> user1__, read their manual?
[17:28] <OerHeks> jason__, you want swap, if you want to hybernate/sleep
[17:28] <OerHeks> with 6 gb is is overkill.
[17:28] <evilbug> i have the following partition scheme and was wondering if anyone can help me in joining the unallocated space with sdb1. https://dl.dropboxusercontent.com/u/10308940/gparted.png
[17:28] <user1__> OerHeks,  so ubuntu does not supports vmware?
[17:28] <Gh0st-> :/
[17:28] <OerHeks>  /ignore user1__
[17:29] <Gh0st-> !help grub?
[17:29] <user1__>  /ignore OerHeks
[17:29] <user1__> Guys, Is vmware supported by ubuntu in anyway?
[17:30] <lotuspsychje> user1__: you have been anwsered already
[17:30] <jason__> OerHeks, 6 gb of RAM isn't that much. I probably am using twice that much with chrome tabs...
[17:30] <user1__> lotuspsychje,  I did not understand it.
[17:30] <user1__> anyone else?
[17:30] <Twirl> hey, im sick of this, every time i turn or/wake up my computer the sound is back at 100%
[17:31] <Twirl> i'ts the most retarded thing i've seen in my life
[17:31] <BluesKaj> Gh0st-, ext4 is the filesystem that most linux OSs use , windows uses ntfs mostly
[17:31] <lotuspsychje> Twirl: ubuntu version?
[17:31] <Twirl> lotuspsychje: 15.04
[17:31] <jason__> Twirl, then your life has probably been pretty good and you should be thankful
[17:31] <lotuspsychje> Twirl: if you want more stable choose LTS
[17:31] <Twirl> jason__: no i'm sick of this
[17:32] <Twirl> jason__: seriously
[17:32] <lotuspsychje> Twirl: no reason to get angry
[17:32] <evilbug> or is it not possible to allocate that free space to /
[17:32] <evilbug> ?
[17:33] <Twirl> lotuspsychje: you would get angry too if every time you turn on your computer or wake up you get your eardrums pierced by the loudest sound
[17:33] <lotuspsychje> evilbug: its possible to merge space to other partitions
[17:34] <lotuspsychje> Twirl: try to submit a bug on 15.04 or try LTS stable
[17:34] <Gh0st-> BluesKaj: ok
[17:35] <Gh0st-> restarting
[17:36] <BrokenCog> frustrating VM.  Installing Ubuntu as a guest on a  Win7 VMware Workstation host never works with the mouse/keyboard.
[17:37] <BrokenCog> anyone seen that before?
[17:37] <Twirl> lotuspsychje: i don't have time for that
[17:37] <Gh0st-> Blueskaj: Goes straight to Windows
[17:37] <Twirl> lotuspsychje: isnt there another way to fix this?
[17:37] <Gh0st-> :/
[17:38] <Gh0st-> BluesKaj: do I have to select from boot option?
[17:39] <BluesKaj> Gh0st-, how old is your pc ?
[17:40] <MonkeyDust> Twirl  if you don't get an answer here, try #ubuntustudio... it's multimedia dedicated, i guess they're more familiar with specific sound issues
[17:41] <Gh0st-> BluesKaj: 3 years
[17:42] <OerHeks> Twirl seem like you use line-out instead of headphone jack
[17:42] <BluesKaj> Gh0st-, try holding the left shift key down right after the post page .. think you have a UEFI instead of a BIOS
[17:42] <Gh0st-> Correct
[17:43] <BluesKaj> !UEFI
[17:43] <Gh0st-> Let me check
[17:43] <Bashing-om> evilbug: In order to enlargge sdb1, you have to have unallocted space to move the partition into. That entails moving sdb6 to the right into the present unallocated space . and then shrinking the container 'sdb2' to get that unallocayed space to the right of 'sdb1'. The extended partition is just a container for the logical partition sdb6.
[17:43] <Gh0st-> Grub rescue?
[17:43] <Gh0st-> In front of me
[17:43] <Gh0st-> :/
[17:44] <quitey> i installed ubuntu with lilo bootlouder can you please tellme how to use it to enter the desktop envirenment  and install grub instead ; i dont know how to use  lilo
[17:44] <Bashing-om> evilbug: You do have your data backed up ? Moving partitions is not without risk !
[17:45] <Gh0st-> Error unknown filesystem
[17:46] <Gh0st-> Grub rescue
[17:46] <BluesKaj> you'll need to run boot-repair to reinstall grub to UEFI boot partition Gh0st- , you can download and install boot-repair to a usb or cd and run it on your  machine that has ubuntu
[17:46] <Gh0st-> BluesKaj: any tutorials to that
[17:46] <Gh0st-> ?
[17:47] <BluesKaj> you won't need a tutorial , boot-repair is very easy to use
[17:47] <Gh0st-> Where how I download
[17:47] <Gh0st-> .
[17:47] <Gh0st-> ?
[17:47] <BluesKaj> i'm sure there are how to's on th einternet if you're not sure
[17:47] <quitey> BluesKaj ; i ned a live ubuntu  to do that , to install boot-repair and so ; right ?
[17:48] <BluesKaj> Gh0st-, boot-repair is a live-media OS
[17:48] <Gh0st-> Can I use boot repair on bootable Ubuntu USB?
[17:48] <quitey> BluesKaj : what about me ?
[17:49] <BluesKaj> Gh0st-, yes
[17:49] <quitey> same to me ?
[17:49] <Gh0st-> BluesKaj: ok cool. How would I do that?
[17:49] <binarywork> afternoon
[17:49] <Gh0st-> Afternoon binarywork
[17:50] <Bashing-om> Gh0st-: See : https://help.ubuntu.com/community/Boot-Repair .
[17:50] <BluesKaj> thanks Bashing-om
[17:50] <quitey> i installed ubuntu with lilo bootlouder can you please tellme how to use it to enter the desktop envirenment  and install grub instead ; i dont know how to use  lilo
[17:51] <BluesKaj> quitey,` read that as well
[17:51] <quitey> but dos it istall grub for me ?
[17:52] <BluesKaj> it will ask you if you want to install grub, choose yes
[17:53] <NewBuntu> Hello?
[17:54] <alian> Who knows how to create Yum warehouse?
[17:54] <NewBuntu> Take a bunch of icecream and put it in a warehouse?
[17:54] <alian> NewBuntu, hello!
[17:54] <MonkeyDust> alian  yum soyund CentOs to me
[17:54] <MonkeyDust> sounds*
[17:55] <alian> I am the Chinese channel, no one is there, I would like to ask how to get yum
[17:56] <alian> Software translation is really bad.
[17:56] <Flannel> alian: yum isn't a package manager that's used on Ubuntu.  Ubuntu uses deb packages not rpms.
[17:56] <Bashing-om> alian: We do not do "yum" in ubuntu . Non-support .
[17:56] <berz3rk> alian: yum is outdated, and instead ubuntu uses apt..
[17:56] <MonkeyDust> alian  it's in the repos, install it like any other program
[17:57] <Anaunymau5> apt-get install yum
[17:57] <alian> Yum needs to get a warehouse. I don't know what to do with it.
[17:57] <alian> Anaunymau5, thank you!
[17:57] <Bashing-om> alian: MonkeyDust I do stand corrected .
[17:58] <MonkeyDust> alian  what's a warehouse, in this channels' context?
[17:58] <Anaunymau5> i think people use dnf now though. Instead of yum.
[17:59] <alian> bye!
[17:59] <NewBuntu> Alright, I freely admit I'm not terribly familiar with Ubuntu. I'm trying to mount a WD MyCloud NAS in such a way that it will stay mounted after rebooting my computer. I believe the NAS is set up as an NFS share and have done sudo apt-get install nfs-common, but the Connect to Server window in Nautilus says "this file server type is not recognized" when I try to connect. What am I doing wrong?
[18:00] <NewBuntu> Any help would be appreciated, or is this something I should instead post to the forum?
[18:06] <NewBuntu> Should I post in the forum then?
[18:09] <Bashing-om> NewBuntu: Does this help : http://askubuntu.com/questions/469368/need-help-connecting-wd-my-cloud-nas-to-14-04 ?
[18:09] <NewBuntu> That's actually the exact set of instructions I was following
[18:10] <jarnos> I am using Logitech k400 keyboard and it seems to work fine except that I can not login to ubuntu in lightdm. I can type characters, but the login fails. It works by an usb keyboard. Why is this?
[18:10] <NewBuntu> Static IP is set, but when I go to the connect to server page as per the final steps, it tells me it doesn't recognize the nfs file server type
[18:12] <Bog4r7> Bah.  I rebooted my system and now it just comes up with the grub rescue prompt.  Dunno what would have broken it.
[18:12] <Bashing-om> NewBuntu: Regret that I can not say. Await here for others who have done this to advise .
[18:16] <MikeRL100> Here's something odd. I upgraded to some slightly unstable Libreoffice builds built for Ubuntu from some PPAs. I fresh installed Libreoffice from those PPAs on another machine, and the global menu integration works.
[18:17] <MikeRL100> On my desktop where I upgraded from an old version, I don't get a global menu, but I get a normal menu bar. How odd.
[18:17] <MikeRL100> I wonder if there's a setting to rest, or if reinstalling would fix it.
[18:23] <MonkeyDust> MikeRL100  libreoffice comes with ubuntu... why use a ppa?
[18:23] <MikeRL100> Because this is a newer version.
[18:24] <MikeRL100> Point is, it works on a fresh install on another machine. But not on this one.
[18:24] <MikeRL100> I'm going to try using it via a guest account.
[18:24] <Bog4r7> That seems to be a common problem on ubuntu,
[18:24] <bekks> Bog4r7: What exactly?
[18:24] <Bog4r7> Official package is old so ppl use a ppa instead.
[18:25] <Bog4r7> I'm doing that for opengl now.
[18:25] <bekks> Bog4r7: Not being bleeding edge isnt being old ;)
[18:25] <MikeRL100> Well, odd.
[18:26] <MikeRL100> The guest account has the menu bar showing as a standard menu as well.
[18:26] <MikeRL100> My laptop, which just had Ubuntu installed, works with the same PPA version.
[18:26] <TJ-> MikeRL100: does your regular login have the environment variable for the Ubity proxy_menu set?
[18:26] <MikeRL100> How can I tell?
[18:27] <MikeRL100> Would resetting Unity help?
[18:27] <TJ-> MikeRL100: in a terminal "echo $UBUNTU_MENUPROXY"
[18:27] <Quatroking> is there a program that'll show system specs and disk usage over HTTP?
[18:27] <MikeRL100> Returns a blank line, TJ.
[18:27] <bodhi_zazen> Quatroking, webmin
[18:27] <bekks> Quatroking: Are you looking for a monitoring solution?
[18:28] <Quatroking> bekks, somewhat I suppose
[18:28] <TJ-> MikeRL100: how about in gsettings: "gsettings get com.canonical.Unity integrated-menus"
[18:28] <Quatroking> bodhi_zazen, thanks, I'll look into it
[18:28] <bekks> !webmin | bodhi_zazen
[18:28] <bekks> Quatroking: Do not use webmin.
[18:28] <Quatroking> oh
[18:28] <MikeRL100> False.
[18:28] <Quatroking> bodhi_zazen, I will not look into it
[18:28] <MikeRL100> You think a setting got messed up?
[18:28] <TJ-> MikeRL100: you want the menus integrated in the global menu?
[18:29] <MikeRL100> TJ, Well, for Libreoffice.
[18:29] <Quatroking> But yeah I just set up deluge with webui, samba, http, php, mysql etc. and I was hoping to find some solution to monitor specs and disk usage remotely but not through ssh
[18:29] <MikeRL100> Everything is set to integrate into the global emnu.
[18:29] <TJ-> MikeRL100: for global its "gsettings set com.canonical.Unity integrated-menus true" - no sure it can be set per-application
[18:29] <MikeRL100> But for some reason, Libreoffice won't.
[18:29] <bekks> Quatroking: If you are looking for a monitoringy solution, thats way different from "specs and disk usage over http" :)
[18:30] <Quatroking> specis and disk usage monitoring?
[18:30] <Quatroking> LD
[18:30] <Quatroking> :D*
[18:30] <Quatroking> specs also
[18:30] <bekks> Quatroking: You may want to take a look into icinga
[18:30] <Quatroking> really all I'd need is cpu, ram and disk usage, now I think of it
[18:31] <MikeRL100> Still messed up.
[18:31] <MikeRL100> I want the menus in the global menu, not LIMs.
[18:31] <TJ-> MikeRL100: did you remove indictor-appmenu ?
[18:31] <MikeRL100> Maybe I installed something extra that broke it.
[18:31] <MikeRL100> Nope.
[18:31] <TJ-> s/indictor-appmenu/indicator-appmenu/
[18:31] <Quatroking> bekks, that looks fancy
[18:32] <MikeRL100> I think it's something extra I may have installed from Ubuntu's PPAs related to LO that's no updated with the new PPAs.
[18:32] <MikeRL100> Let me purge all that stuff and try installing just Libreoffice as it is.
[18:32] <TJ-> MikeRL100: You'd need to review the package installation list/history, then
[18:34] <m_> how are you
[18:34] <MikeRL100> I also tried exporting the PPAs on the desktop to the laptop via Y PPA Manager.
[18:35] <MikeRL100> But who knows? If it missed a PPA for Libreoffice, it may explain some issues.
[18:35] <Sazpaimon> Can someone suggest a remote desktop application that supports multiple users and works well with video playing on the remote system?
[18:35] <Sazpaimon> I've found that something like VNC slows down the entire desktop to a crawl when there's video playing
[18:36] <owen1> is there a screen recording software that also record the webcam?
[18:39] <MonkeyDust> owen1  i guess shutter can do both
[18:40] <Rhymnoceros> tassadar?
[18:40] <owen1> MonkeyDust: sorry. i am talking about screen recording in video.
[18:40] <MikeRL100> I fixed it. Good news.
[18:40] <owen1> maybe https://launchpad.net/kazam ?
[18:40] <MikeRL100> Thanks for the help, though, guys.
[18:41] <MikeRL100> I just want to have help as a backup. (-:
[18:41] <owen1> kazam's homepage looks so terrible
[18:41] <MikeRL100> I fixed it by purging all the stuff related to it, and then installing the libreoffice package and all related stuff.
[18:41] <owen1> and why don't they host their code on github
[18:41] <MikeRL100> My guess is that maybe the GNOME or GTK3 packages caused issues.
[18:43] <MikeRL100> Just glad the offending packages are gone. I was getting sick of having to use my Windows install with 365 or Android device with Google Docs to get documents edited.
[18:43] <MikeRL100> Those PPA versions autoupgraded, but some stuff that worked before broke along the way.
[18:44] <MikeRL100> Anyhow, it seems that I see way less graphical issues than in previous builds, and now that the breakage is worked around, I can get back to using LO.
[18:45] <imthenachoman> hey guys. i know how to take a backup of a full system but i'm wondering, once i have everything running i could just take a backup of /etc to get config files and then export a list of all installed packages. right? and i'm wondering if there are any tools that do this.
[18:46] <jni> HI
[18:46] <jni> anyone there
[18:46] <imthenachoman> i guess /etc, /var, and /home
[18:47] <jni> hi
[18:47] <jni> Anyone
[18:47] <MonkeyDust> jni  it works, we see you
[18:48] <TJ-> imthenachoman: Yes, there's "debfoster" which will create the list of top-most packages that when installed will install all the required dependencies
[18:48] <jni> someone answered hoooooooorrrrrayyyyyy
[18:48] <jni> how you doing
[18:48] <MonkeyDust> jni  this is the support channel
[18:48] <TJ-> imthenachoman: if you don't mind losing the auto-installed markers in the target, you can use "dpkg --get-selections"  "dpkg --set-selections"
[18:50] <owen1> how to install kazam? i am on ubuntu 15.04 and run: sudo add-apt-repository ppa:kazam-team/unstable-series && sudo apt-get update but i see: 'W: Failed to fetch http://ppa.launchpad.net/kazam-team/unstable-series/ubuntu/dists/vivid/main/binary-i386/Packages  404  Not Found'
[18:51] <wileee> owen1, PPA's are not supported here, unless no other option and you have to be sure a ppa has releases for your release.
[18:51] <ubuntu> i'm realli trying for ours installing pygtk!!!!!!!!!!!!!!
[18:51] <Guest37753> im going crazy please D:
[18:52] <Guest37753> im really tryng for *hours
[18:52] <wileee> !details | Guest37753 if you have not already
[18:53] <owen1> wileee: oh. so where can i get help about installing using ppa?
[18:53] <Bashing-om> owen1: " http://ppa.launchpad.net/kazam-team/unstable-series/ubuntu/dists/ ' the list does not include vivid . Maybe ask the maintainer if 15.10 will be supported ?
[18:53] <owen1> Bashing-om: thanks!
[18:53] <owen1> Bashing-om: where did u find that?
[18:53] <imthenachoman> TJ-: awesome. thanks
[18:54] <Bashing-om> owen1: From the link you provided .
[18:54] <wileee> owen1, what Bashing-om gave you I eluded to, the ppa having a release for your release, you can find them directlym they have web pages, don't just add them without checking is all.
[18:55] <Guest37753> after downloading "pygtk-2.24.0.tar" and unpacking it.. I run cd ... than config... in the and of all I get this )
[18:55] <Guest37753> checking for PYGOBJECT... no
[18:55] <Guest37753> configure: error: Package requirements (pygobject-2.0 >= 2.21.3) were not met:
[18:55] <Guest37753> No package 'pygobject-2.0' found
[18:55] <Guest37753> Consider adjusting the PKG_CONFIG_PATH environment variable if you
[18:55] <Guest37753> installed software in a non-standard prefix.
[18:56] <MonkeyDust> Guest37753  next time, use a pastebin
[18:56] <Guest37753> I really sorry... what is a pastebin?
[18:56] <tux38> Hi
[18:56] <DJones> !pastebin | Guest37753
[18:57] <Guest37753> now i Know ^^
[18:57] <tux38> \sky
[18:57]  * imthenachoman has to hand it to some of the experts that help in this chat...
[18:57] <tux38> Lol
[18:58] <owen1> Bashing-om: is there a link from https://launchpad.net/~kazam-team/+archive/ubuntu/stable-series to the page you find?
[18:58] <wileee> tux38, Can we help you?
[18:58] <tux38> Hi
[18:58] <owen1> i am trying to understand how to find that myself
[18:58] <TJ-> !info python-gtk vivid | Guest37753
[18:58] <TJ-> !info python-gtk2 vivid | Guest37753
[18:58] <owen1> i don't think the web interface of launchpad is very intuitive
[18:58] <tux38> Add a new repo server
[18:58] <Guest37753> how i get it please on ubuntu studio?
[18:59] <wileee> owen1, PPA is the key there ppa kazam on the web should show it in a search list.
[18:59] <TJ-> owen1: Look in the "Series" column of the Technical package list: https://launchpad.net/~kazam-team/+archive/ubuntu/unstable-series/+packages
[18:59] <Guest37753> i read about headers needed... that i don't have found
[19:00] <tux38> Hey dawg
[19:00] <TJ-> Guest37753: what ubuntu release is the PC using? Trusty 14.04 ?
[19:00] <wileee> tux38, Please this is support if you want to chat try #ubuntu-offtopic
[19:00] <Guest37753> ubuntu studio
[19:00] <Bashing-om> owen1: Deom your error report " http://ppa.launchpad.net/kazam-team/unstable-series/ubuntu/dists/vivid/main/binary-i386/Packages  404  Not Found " , pull "  http://ppa.launchpad.net/kazam-team/unstable-series/ubuntu/dists/ ". The last supported release was trusty .
[19:00] <tux38> Ok
[19:00] <TJ-> Guest37753: yes, but which release (version) ?
[19:01] <tux38> Sigh some old junk
[19:01] <TJ-> Guest37753: "cat /etc/issue"
[19:03] <owen1> wileee: Bashing-om TJ- thanks. i had to click on 'View package details
[19:03] <owen1> View package details
[19:03] <tux38> Gay guy !
[19:04] <owen1> and go through the 'series' column. that's a bit convoluted way to find such an important detail. but now i know how. thanks!
[19:04] <owen1> if launchpad want to make it easier it should have a visible section on the project homepage that shows what version of ubuntu is supported.
[19:04] <Guest37753> sorry TJ not the beta but the latest... i don't know who to find the release
[19:05] <irgendwer4711> hi, is there anyone, who got Tremulous working on x64?
[19:05] <tux38> Wow
[19:05] <tux38> Pissy ops
[19:05] <TJ-> Guest37753: "cat /etc/issue"
[19:06] <Quatroking> Alright, I got apache, php5, mysql, bittorrent, samba..
[19:06] <tux38> Gotta love ops on a power trip
[19:06] <Quatroking> did I forget any cool stuff for my homeserver?
[19:06] <Guest37753> Ubuntu 14.04.3 LTS
[19:06] <OerHeks> oh, tux38 is back
[19:06] <MonkeyDust> tux38  drop the silly random comments
[19:06] <DJones> tux38: Ops haven't said a word to you
[19:06] <Guest37753> Ubuntu 14.04.3 LTS studio
[19:06] <tux38> Not here
[19:06] <DJones> tux38: If you can't stay on topic, please feel free to find another channel
[19:06] <tux38> I didnt type silly random comments bro
[19:07] <tux38> Tjank you
[19:07] <TJ-> !info python-gtk2 trusty | Guest37753
[19:07] <DJones> tux38: what ops do in other channels isn't our conecern, if you have an ubuntu support question, please ask it, if not, bear in mind that isn't a chat channel
[19:07] <TJ-> Guest37753: as you can see from that, Trusty already has version 2.24, so all you need do is "sudo apt-get install python-gtk2"
[19:08] <tux38> Its a chat room !
[19:08] <matt__> Does anyone know how I can customize my superkey, so SUPER+T would open the terminal instead of the trash bin
[19:09] <tux38> Omg touchy much
[19:09] <Guest37753> and why i get these messages when i stry to install "pygtk-2.24.0.tar"
[19:09] <MonkeyDust> tux38  are you a lonely teenage girl looking for attention? there are other channels for that
[19:09] <Guest37753> whit your command line TJ it seems to be there
[19:09] <tux38> No
[19:09] <TJ-> Guest37753: because you haven't installed the build dependencies for the source package
[19:09] <tux38> Lay off
[19:09] <TJ-> Guest37753: right, so no need to build it then :)
[19:10] <tux38> Sigh
[19:10] <DJones> tux38: Either stay on topic, or leave the channel
[19:10] <Guest37753> and how to buil the dipendance? so i have one of all :D
[19:10] <tux38> Wow
[19:10] <Guest37753> i need this?
[19:10] <tux38> Theres no topic
[19:10] <TJ-> Guest37753: There's no need to build the package - you already said its installed from the Ubuntu archive
[19:11] <Guest37753> also kann I open a beer for you ^^ thank you...
[19:11] <Guest37753> wey much
[19:15] <vapelyfe> sup Linux friends
[19:17] <vapelyfe> ?
[19:18] <bekks> vapelyfe, do you have an ubuntu support questionß
[19:19] <vapelyfe> yes i do bekks how can i get chronos on a chromebook c720
[19:19] <bekks> vapelyfe: Whats Chronos?
[19:20] <vapelyfe> its ubuntu for chromebooks
[19:20] <bekks> vapelyfe: Chronos isnt Ubuntu.
[19:20] <vapelyfe> w.e ur dumb bye
[19:21] <bekks> vapelyfe: Good luck in finding support for your issues having that attitude.
[19:26] <Epic-Games> Try this new Epic Amazing Game now from Youtube with an amazing graphics https://www.youtube.com/watch?v=l2VnFpbnffM
[19:28] <DJones> Epic-Games: No.
[19:28] <DJones> !topic | Epic-Games
[19:28] <Diplomat> Guys, I have a strange issue.. when i write "ip r" it shows me my ips and stuff.. but one ip is tied to a wrong route. Any ideas how I could remove that route ?
[19:29] <Diplomat> DJones: it's a bot
[19:30] <DJones> Diplomat: Probably, but it gets a chance
[19:30] <Diplomat> Well, it posted that youtube link (i assume it was a youtube link, i didnt see it myself) to #openstack too
[19:32] <TJ-> Diplomat: "ip route del <spec...>"
[19:32] <Diplomat> sweet thanks
[19:34] <Gh0st-> what is the best way to retain windows bootloader and Ubuntu loader when you are getting grub rescue?
[19:35] <mr_linux> hi
[19:36] <Gh0st-> hello mr_linux
[19:38] <Gh0st-> can I use EasyBCD to add ubuntu bootloader into Windows?
[19:38] <bekks> Gh0st-: thats a question for the Windows support. Ubuntu doesnt have "EasyBCD".
[19:40] <EriC^^> Gh0st-: if you're getting grub rescue then you need to fix that first to boot ubuntu
[19:40] <Gh0st-> EriC^^: hmm
[19:41] <EriC^^> Gh0st-: boot a live usb and come back
[19:41] <Gh0st-> EriC^^: what is the best way to repair? can I use UI tool?
[19:43] <curiousx> EriC^^, just a suggestion, i got an almost dead HDD with 120 gbs in there that i want to rescue, what would be the safest way to get that data back to another HDD
[19:44] <EriC^^> curiousx: i'd say use ddrescue to make an image first
[19:44] <Gh0st-> EriC^^: ok
[19:44] <EriC^^> !info gddrescue
[19:45] <curiousx> EriC^^, oh! ty, ill see that software, btw the damaged HDD doesnt have bad sectors, it just reads and write very slow, i dont mean to fix it just get the data back, so ill see ddrescue
[19:46] <EriC^^> curiousx: ok :)
[19:47] <meoneteh> can you tell me how to install google earth in Lubuntu 15.04 32bit system  safely ??
[19:47] <Gh0st-> EriC^^: I am on Live USB now
[19:47] <jeffrey_f> curiousx: Pull to a new HDD.  It may not have bad sectors, that just means the media, where data exists, is ok......
[19:47] <bekks> !info google-earth
[19:48] <meoneteh> bekks ; so what do i do then ??
[19:48] <EriC^^> Gh0st-: ok, type sudo parted -l | nc termbin.com 9999
[19:49] <bekks> meoneteh: https://help.ubuntu.com/community/GoogleEarth
[19:49] <Gh0st-> EriC^^:
[19:49] <curiousx> jeffrey_f, yeah! the media it's ok,  but idk i was thinking maybe this disk stop workin in between backin' the data back, then i said, maybe i should try a software that is safest :p
[19:50] <Gh0st-> paste here or your notice?
[19:50] <EriC^^> Gh0st-: paste here
[19:50] <Gh0st-> http://termbin.com/qglq
[19:51] <EriC^^> Gh0st-: type sudo cgdisk /dev/sda
[19:51] <EriC^^> go down to the ext4 partition, and choose type > 8300
[19:51] <marcos__> help in spanish please
[19:52] <Gh0st-> EriC^^: would I be able to boot into windows as well?
[19:52] <Gh0st-> :)
[19:52] <owen1> is there a screen recording video that also records the webcam and works with 15.04?
[19:52] <Gh0st-> just saying?
[19:52] <EriC^^> Gh0st-: yeah
[19:52] <Gh0st-> col
[19:52] <Gh0st-> cool
[19:52] <Gh0st-> EriC^^: thanks for your help
[19:52] <Gh0st-> let me do that
[19:52] <Gh0st-> :D
[19:52] <meoneteh> bekks> yesterday i entered some of those command in the terminal and i trashed my system , i don't know what happened , and i had to reinstall again , so am afraid of doing it again
[19:53] <bekks> meoneteh: "some of those" means what exactly?
[19:53] <bekks> meoneteh: And "trashed my system" is pretty generic.
[19:54] <meoneteh> sudo apt-get install libc6-i386 libglib2.0-0:i386 libsm6:i386   or  libglu1-mesa:i386 libgl1-mesa-glx:i386 libxext6:i386 \
[19:54] <bekks> meoneteh: So if you dont want to install google-earth, dont install it.
[19:54] <Gh0st-> EriC^^: can't find ext4? :/
[19:54] <bekks> meoneteh: "or"?
[19:54] <marcos__> hello. where can i find help in spanish
[19:54] <bekks> !es | marcos__
[19:55] <meoneteh> bekks ; actually i find that wiki tutorial very confusing , is there a simpler one ?
[19:55] <EriC^^> Gh0st-: it should be the 52gb partition 2nd from the bottom
[19:55] <bekks> meoneteh: What exactly is confusing for you?
[19:55] <Gh0st-> 48.6  gb
[19:56] <Gh0st-> :/
[19:56] <meoneteh> bekks ; i never used google earth befor and i am trying it  the first time in Lubuntu
[19:56] <EriC^^> Gh0st-: press type, see what it says
[19:56] <bekks> meoneteh: And what is confusing for you in that article?
[19:57] <meoneteh> bekks : do i need to follow the steps 1 , 2 3  exactly as it mentioned
[19:57] <Gh0st-> EriC^^: current type is 0700
[19:57] <bekks> meoneteh: Yes.
[19:57] <EriC^^> Gh0st-: ok, set it to 8300
[19:58] <Gh0st-> done
[19:58] <EriC^^> Gh0st-: press write
[19:58] <Gh0st-> now itsays Linux File System
[19:59] <Gh0st-> are you sure you want to write partition table?
[19:59] <meoneteh> bekks : the google earth website link is not working they should updated or somthing
[19:59] <Gh0st-> EriC^^: Warning this might destroy data on your disk?
[19:59] <bekks> meoneteh: the link works fine here.
[20:00] <EriC^^> Gh0st-: yes
[20:00] <Gh0st-> EriC^^: done!
[20:01] <meoneteh> bekks> so why it's not working in my side ?
[20:01] <Gh0st-> asking for reboot
[20:01] <bekks> meoneteh: Yes.
[20:01] <EriC^^> Gh0st-: ok, type sudo partprobe
[20:01] <Gh0st-> yp
[20:01] <Gh0st-> done
[20:01] <EriC^^> Gh0st-: type sudo parted -l | nc termbin.com 9999 again
[20:02] <Gh0st-> http://termbin.com/axwg
[20:03] <EriC^^> Gh0st-: well, it doesn't show the type anymore
[20:03] <Gh0st-> EriC^^: which means?
[20:03] <EriC^^> Gh0st-: anyways np, type sudo mount /dev/sda11 /mnt
[20:03] <Banjooie> Hey, maybe now that there's more people--I'm having a weird issue with tinyfugue, which is a terminal telnet client, ever since I installed a new laptop keyboard.
[20:03] <Banjooie> It only accepts input for the first second I open the program.
[20:03] <meoneteh> bekks : so after downloading just run it gedebi installer and thats all ?
[20:03] <Gh0st-> EriC^^: done
[20:03] <EriC^^> Gh0st-: maybe it needs a reboot to show it, it's ok anyways
[20:04] <EriC^^> Gh0st-: type cat /mnt/etc/fstab | nc termbin.com 9999
[20:04] <Gh0st-> http://termbin.com/bnh2
[20:05] <meoneteh> nekks  ; what is lsb-core ?
[20:05] <EriC^^> Gh0st-: ok, well, windows is using uefi i think, cause you have an efi partition, ubuntu isn't though, for some reason it think it's installed in legacy mode, and it has a bios-boot partition to load grub
[20:06] <EriC^^> Gh0st-: type ls -l /sys/firmware/efi
[20:06] <EriC^^> does it exist?
[20:06] <Gh0st-> let me check
[20:06] <meoneteh> bekks ; what is it used for ?
[20:07] <meoneteh> the lsb-core
[20:07] <Gh0st-> EriC^^: ls: cannot access /sys/firmware/efi: No such file or directory
[20:07] <EriC^^> Gh0st-: ok, which windows are you using?
[20:07] <Gh0st-> EriC^^: windows 10
[20:07] <EriC^^> ok, can you reboot the live usb in uefi mode somehow?
[20:08] <Gh0st-> :/
[20:08] <Gh0st-> EriC^^: now sure how
[20:08] <EriC^^> try pressing esc, and getting a boot options menu, and choose uefi usb
[20:08] <Gh0st-> not*
[20:08] <Gh0st-> ok
[20:08] <Gh0st-> let me try
[20:08] <bekks> !info lsb-core | meoneteh
[20:10] <meoneteh> bekks ; yes but that doesnt tell what it is used for , i dont have it installed in my system so i nedd to installe it
[20:10] <bekks> meoneteh: So install it.
[20:11] <meoneteh> bekks : am feeling curious to know
[20:12] <Gh0st-> EriC^^: done!
[20:12] <bekks> meoneteh: so use your package management system for getting that information.
[20:12] <EriC^^> Gh0st-: ok, type ls -l /sys/firmware/efi to be sure
[20:13] <Gh0st-> yup
[20:13] <Gh0st-> can see some text
[20:13] <Gh0st-> :)
[20:13] <EriC^^> Gh0st-: ok, type sudo parted -l | nc termbin.com 9999
[20:13] <Gh0st-> EriC^^: http://termbin.com/hcas
[20:14] <Maurice2NL> can someone help me with choppy video issue, ubuntu 14.04, acer aspire one?
[20:14] <EriC^^> Gh0st-: ok, type sudo mount /dev/sda11 /mnt
[20:14] <user1__> I followed this https://help.ubuntu.com/community/VMware/Player       Now I want to uninstall it. Where was it installed and where might be the uninstall script?
[20:14] <Gh0st-> done
[20:15] <trumpler> ubuntu has a full iso ? with codecs and most of the repositories preloaded ?
[20:15] <EriC^^> Gh0st-: type sudo mkdir -p /mnt/boot/efi
[20:15] <Gh0st-> EriC^^: done
[20:16] <EriC^^> Gh0st-: type sudo mount /dev/sda1 /mnt/boot/efi
[20:16] <Gh0st-> EriC^^: done
[20:16] <EriC^^> Gh0st-: ok, type ls -l /mnt/boot/efi
[20:16] <EriC^^> is there an EFI dir there?
[20:17] <Gh0st-> EriC^^: yes
[20:17] <EriC^^> Gh0st-: ok, great
[20:17] <EriC^^> Gh0st-: type sudo blkid /dev/sda1
[20:17] <EriC^^> grab the UUID by highlighting it, then open another terminal and type sudo nano /mnt/etc/fstab
[20:17] <Bashing-om> trumpler: Many codecs are proprietary, and will not be on the image . Same can be said for some graphics drivers and as well WIFI drivers ..
[20:17] <meoneteh> bekks ; nice
[20:18] <Gh0st-> EriC^^: just highlight what's inside the "" ?
[20:18] <EriC^^> Gh0st-: you need to add the line UUID=<uuid here>	/boot/efi	vfat	defaults	0	1
[20:18] <EriC^^> Gh0st-: yes, and in the editor press the middle mouse button to paste it after UUID=
[20:19] <Gh0st-> EriC^^: done
[20:19] <Maurice2NL> hi, anyone can help me with video issues on my acer aspire one d270?
[20:19] <EriC^^> Gh0st-: ok, save the file with ctrl+o
[20:20] <Gh0st-> EriC^^: <> without this right?
[20:20] <EriC^^> Gh0st-: yes
[20:20] <bekks> Maurice2NL: that device is horribly slow, if thats your isssue.
[20:20] <trumpler> Bashing-om: but what about the restricted extras ? are they also third party stuffs
[20:20] <Gh0st-> EriC^^: done
[20:21] <Maurice2NL> I added 4 gb ddr3 ram, works fine with windows now but not with ubuntu...
[20:21] <Bashing-om> !restricted-extras
[20:21] <EriC^^> Gh0st-: for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done
[20:21] <EriC^^> type the whole line Gh0st-
[20:21] <Gh0st-> done
[20:22] <EriC^^> Gh0st-: type sudo chroot /mnt
[20:22] <EriC^^> you should get a root shell
[20:22] <lele_> Hey guys
[20:22] <Gh0st-> :herb:yup
[20:22] <Gh0st-> got it
[20:22] <EriC^^> Gh0st-: ok, type apt-get install --reinstall grub-efi-amd64-signed
[20:23] <lele_> I need help, is there any way to install Ubuntu to a hard drive partition without dvd/usb drive?
[20:23] <EriC^^> lele_: sure, you can boot it from grub if you already have grub, or grub4dos
[20:23] <EriC^^> lele_: https://help.ubuntu.com/community/Grub2/ISOBoot
[20:24] <Bashing-om> trumpler: Yeah, there are proprietary stuff there .. do in terminal ' apt-cache show ubuntu-restricted-extras ' for the info .
[20:24] <Gh0st-> EriC^^: installation finished. No Errors reported
[20:24] <lele_> Going to check that out thanks a lot
[20:24] <EriC^^> Gh0st-: ok, type update-grub
[20:24] <Gh0st-> EriC^^: Can't access efivars filesystem at /sys/firmware/efi/efivars, aborting
[20:24] <EriC^^> lele_: no problem
[20:24] <OerHeks> Maurice2NL, acer aspire one, with intel 3600 a.k.a. cedartrail ?
[20:24] <EriC^^> Gh0st-: that sucks
[20:24] <EriC^^> Gh0st-: that's after update-grub ?
[20:25] <Gh0st-> no before
[20:25] <EriC^^> oh
[20:25] <OerHeks> Maurice2NL, it is an old chipset, linux users shiver when they read that.
[20:25] <EriC^^> Gh0st-: try from another terminal sudo modprobe efivars
[20:25] <Maurice2NL> thx, but it is intelN2600
[20:25] <Gh0st-> EriC^^ Setting up secureboot-db (1.1) ...
[20:25] <OerHeks> Maurice2NL, even under windows it gives choppy video
[20:25] <Gh0st-> just after that can't access .......
[20:26] <Maurice2NL> nope, not under w10
[20:26] <EriC^^> Gh0st-: ok
[20:26] <EriC^^> Gh0st-: try modprobe from another terminal, then try the apt-get install again from the chroot
[20:26] <EriC^^> Gh0st-: also try modprobe efivars from the chroot before apt-get
[20:27] <Gh0st-> done
[20:27] <Gh0st-> seems like done
[20:27] <EriC^^> did it not error out this time?
[20:27] <Gh0st-> EriC^^: no
[20:27] <EriC^^> ok
[20:27] <OerHeks> i know it is atom n2600 .. but the GPU is the linux issue. i really surprised that windows 10 works
[20:27] <EriC^^> Gh0st-: type efibootmgr -v | nc termbin.com 9999
[20:28] <Maurice2NL> so nothing to do?
[20:28] <OerHeks> 1st.it has only 64 mb, linux wants a min128 mb AFAIK.
[20:28] <Gh0st-> EriC^^: http://termbin.com/d8uz
[20:28] <Gh0st-> EriC^^: I haven't done the second setup you have mentioned?
[20:29] <EriC^^> you mean update-grub ?
[20:29] <Gh0st-> yeah
[20:29] <Gh0st-> should I do it?
[20:29] <EriC^^> yeah
[20:29] <OerHeks> Maurice2NL, no, i think it is a nice doorstopper ( for linux) so keep it for win10 :-)
[20:29] <Petra2> hey I am new to ubuntu how can I get started learning and using ubuntu?
[20:30] <Gh0st-> EriC^^: Adding boot menu entry for EFI firmware configuration
[20:30] <Gh0st-> done
[20:30] <Maurice2NL> yes, thx but I wanted to avoid windows... :(
[20:30] <EriC^^> Gh0st-: ok, type exit
[20:31] <EriC^^> then try rebooting
[20:31] <meoneteh> is it important to have ubuntu-restricted-extras and Java installed ???
[20:32] <bekks> meoneteh: if thos packages provide things you need - yes.
[20:32] <Gh0st-> EriC^^: gone straighten to Windows
[20:32] <OerHeks> Maurice2NL, according to various posts on intel, there is no good driver to play video for windows too.. so i really wonder .. https://communities.intel.com/message/179195 they even put up petitions:-D
[20:33] <EriC^^> Gh0st-: np, it's probably a stubborn bios
[20:33] <meoneteh> bekks ; what kind of things they provide ?
[20:33] <EriC^^> Gh0st-: boot the live usb again
[20:33] <bekks> meoneteh: Do you know what Java is?
[20:33] <Gh0st-> EriC^^: oh I have manually started it.
[20:33] <Gh0st-> ::
[20:33] <Gh0st-> :/
[20:33] <EriC^^> Gh0st-: no problem, boot into it
[20:33] <meoneteh> bekks : it's used for browsing the web i guess
[20:33] <Gh0st-> Yeah booting
[20:34] <bekks> meoneteh: Thats wrong.
[20:34] <bekks> meoneteh: https://java.com/en/download/faq/whatis_java.xml
[20:34] <meoneteh> bekks : for what then ?
[20:35] <meoneteh> bekks ; so it's a language, so i need it to access application written in java in the web right ?
[20:35] <OerHeks> meoneteh, openJDK is fine. some apps require oracle java, i avoid those.
[20:36] <bekks> meoneteh: No.
[20:36] <curiousx> Petra2,  watch some vids on youtube this youtube channel it's not ubuntu only but about linux distros in general: https://www.youtube.com/user/LinuxSpatry
[20:36] <Gh0st-> EriC^^: I am in it
[20:36] <bekks> meoneteh: Java is a programming language. And you need that package for using applications written in Java, AND for acessing web content using java.
[20:37] <EriC^^> Gh0st-: ok, type sudo cp /boot/efi/EFI/Boot/bootx64.efi{,.backup}
[20:37] <EriC^^> Gh0st-: i'll let you know what's going on, in case you need to reverse it in the future
[20:37] <Gh0st-> EriC^^: do you think we should go ahead?
[20:38] <meoneteh> and what about ubuntu-restricted-extras
[20:38] <meoneteh> bekks
[20:38] <OerHeks> meoneteh, Chrome recently banished plugins like Java and Silverlight (and made auto-playing Flash ads disabled by default), and now Firefox is doing the same source: engadget
[20:38] <Gh0st-> EriC^^: I am pretty happy with this ? this is ideal to be honest because my Mrs not have to bother selecting OS
[20:38] <MonkeyDust> !restricted | meoneteh
[20:38] <OerHeks> restricted extras is nice to start with, some tools, fonts, webplugins and codex.
[20:38] <EriC^^> Gh0st-: we're about to make a backup of the microsoft efi file, and copy the ubuntu efi file there renaming it as the microsoft one
[20:38] <bekks> meoneteh: https://en.wikipedia.org/wiki/Ubuntu-restricted-extras
[20:39] <EriC^^> Gh0st-: i highly recommend switching them
[20:39] <Gh0st-> EriC^^: does that affect Ubuntu ?
[20:40] <Gh0st-> EriC^^: what if we leave the settings as it is?
[20:40] <EriC^^> Gh0st-: no, all it does is trick the bios into loading ubuntu when it thinks it's loading windows ( cause it's hardwired to do so )
[20:40] <EriC^^> Gh0st-: it will suck, you'll have to manually select ubuntu each time
[20:40] <Gh0st-> EriC^^: oh that I think we can leave it alone
[20:40] <Gh0st-> EriC^^: yeah I can live withthat
[20:40] <Gh0st-> EriC^^: but I must admit this Ubuntu is rather slow for me :/
[20:40] <jni> hi anyone speak russian
[20:41] <EriC^^> Gh0st-: as you wish, it's easily reversible if you ever decide to remove ubuntu, you just name the .efi.backup as .efi
[20:41] <Gh0st-> EriC^^: yeah I think we can leave it for the time being :)
[20:41] <meoneteh> bekks ; can it allow me to install mplayer gui witch was supported with trusty  in vivid i mean the ubuntu-restricted-extras
[20:41] <Gh0st-> EriC^^: but I do apprecite your time and support!
[20:41] <Gh0st-> apprecaite*
[20:41] <Gh0st-> appreciate*
[20:41] <EriC^^> Gh0st-: ok, no problem :)
[20:42] <Gh0st-> this is sluggish :/
[20:42] <Maurice2NL> Gallium 0.4 on llvmpipe (LLVM 3.6, 128 bits)
[20:42] <jni> anyone speak russian
[20:42] <bekks> meoneteh: No. The mplayer gui is not part of the restricted extras.
[20:42] <Gh0st-> EriC^^:  my Fan is constantly on
[20:42] <bprompt> meoneteh:     some apps require java engine to run, Eclipse framework for one, or some apps like jEdit, now, you don't have to run oracle's java, you can use openJDK as already mentioned, which is another branded java engine
[20:42] <Gh0st-> I think its the video card
[20:42] <Fuchs> jni: in #ubuntu-ru, probably
[20:42] <cloaked1> So I need to boot into my 15.04 in single user mode and run some stuff requiring network. Only, when I boot into single user mode, my eth0 doesn't show up. So, what's the trick? I can't even find the fix using the Googles and the Internets.
[20:42] <EriC^^> Gh0st-: type ps aux | sort -k 3 | nc termbin.com 9999
[20:42] <EriC^^> Gh0st-: probably something is wrong
[20:43] <jni> Why u all ignoreing me
[20:43] <bekks> !ru | jni
[20:43] <lele_> Do I need grub to install native linux in a hard drive partition without a usb/dvd drive?
[20:43] <MonkeyDust> jni  type /j #ubuntu-ru
[20:43] <meoneteh> bekks : and there is no way to get it in my vivid system as far as you know
[20:43] <bprompt> jni:    hmmm haven't seen a posting myself, did you ask anything yet?
[20:44] <Gh0st-> EriC^^: paste here?
[20:44] <EriC^^> Gh0st-: yes paste the link here
[20:44] <Gh0st-> http://termbin.com/lhrf
[20:45] <cloaked1> when I issue the command: systemctl start network, I get the error: Failed to start network.service: Unit network.service failed to load: No such file or directory.
[20:45] <bekks> !info mplayer-gui | meoneteh
[20:45] <cloaked1> for the record, I am really not liking systemd
[20:45] <bekks> meoneteh: I never used that gui.
[20:45] <EriC^^> Gh0st-: kind of odd firefox is using 51%
[20:45] <OerHeks> cloaked1, sudo service networking start
[20:45] <Gh0st-> yeah :/
[20:45] <EriC^^> Gh0st-: if you type top in the terminal, what do you get?
[20:46] <curiousx> meoneteh, try mpv
[20:46] <meoneteh> bekks : I like it it's so fast
[20:46] <Gh0st-> EriC^^: damn firefox
[20:46] <cloaked1> OerHeks: I'm in single user mode. :) No need to use sudo. And it didn't work...though, good suggestion. I think there's something else that needs to be done.
[20:46] <bekks> meoneteh: It is as fast as all the other players.
[20:47] <EriC^^> Gh0st-: try updating it maybe, sudo apt-get update && sudo apt-get dist-upgrade
[20:47] <EriC^^> Gh0st-: which graphics driver are you using? type lspci -k | grep -A2 VGA | nc termbin.com 9999
[20:47] <zproc> how can i ask apt-get to re install a package please?
[20:47] <zproc> to force a reinstall..
[20:47] <EriC^^> zproc: sudo apt-get install --reinstall <package>
[20:47] <zproc> Ah!
[20:48] <zproc> thanks EriC^^
[20:48] <EriC^^> no problem
[20:48] <BlackFlag> I have troble with login in Ubuntu 14.04 32bit. I already removed .ICEauthority and .Xauthority and rebooted, but still doesn't work.
[20:48] <Gh0st-> EriC^^: not working
[20:48] <EriC^^> BlackFlag: does the guest account work?
[20:49] <BlackFlag> I will try
[20:49] <Gh0st-> EriC^^: I am running this at the mo  sudo apt-get dist-upgrade
[20:49] <EriC^^> ok
[20:49] <EriC^^> did you run update before it?
[20:49] <Gh0st-> yes
[20:49] <Gh0st-> apt-get udpate
[20:49] <EriC^^> ok
[20:49] <Gh0st-> and then this  sudo apt-get dist-upgrade
[20:49] <mstfa> BlackFlag: Do you get an error message?
[20:50] <BlackFlag> EriC^^, Guest also doesn't work
[20:50] <EriC^^> BlackFlag: ok, type lspci | grep VGA | nc termbin.com 9999
[20:50] <cloaked1> use of "service networking start" still doesn't get my eth0 up. Really frustrating.
[20:50] <cloaked1> anyone?
[20:50] <BlackFlag> mstfa, no, I put the password and press enter, and then gets back to login screen.
[20:50] <meoneteh> bekks : i have just installed google earth and when i launched it i got an error , http://imgur.com/y9jBTJf
[20:50] <cloaked1> single usermode; networking won't come up.
[20:50] <bekks> cloaked1: Sounds like a broken network configuration.
[20:51] <cloaked1> Bekks: works in full usermode, though.
[20:51] <OerHeks> cloaked1, i guess you choose the wrong line when you booted in recovery mode, without networking
[20:51] <cloaked1> perhaps that's because of NetworkManager?
[20:51] <bekks> cloaked1: What is "full user mode"?
[20:51] <meoneteh> bekks> do  i need to have an account ?
[20:51] <bekks> meoneteh: So use a correct URL.
[20:51] <cloaked1> bekks: init 3/5/6
[20:51] <cloaked1> I'm in init1
[20:51] <bekks> cloaked1: There arent runlevels on Ubuntu anymore, since ages.
[20:52] <cloaked1> bekks: I know. I'm using that as a reference since I'm really not sure what the analogous term(s) would be.
[20:52] <meoneteh> bekks ; ?
[20:53] <cloaked1> bekks: where would I fix a broken network configuration from CLI in single usermode?
[20:53] <BlackFlag> EriC^^, the output is "http://termbin.com/hhk9
[20:53] <bekks> cloaked1: In the /etc/network/interfaces file.
[20:53] <cloaked1> lemme go take a looksee.
[20:53] <mstfa> BlackFlag: can you provide a pastebin of /var/log/lightdm/lightdm.log?
[20:54] <EriC^^> BlackFlag: ok, type dpkg -l | grep nvidia | nc termbin.com 9999
[20:54] <Gh0st-> EriC^^: lots of things are unpacking
[20:55] <Gh0st-> I literally get blown away by all these efforts for creating Ubuntu
[20:55] <cloaked1> ok, that gives me a hint. bbiab. Thanks bekks
[20:56] <meoneteh> can anyone help me with this problem please http://imgur.com/y9jBTJf
[20:56] <Gh0st-> EriC^^: all done
[20:57] <Gh0st-> how can I check about the graphic card?
[20:57] <EriC^^> Gh0st-: lspci -k | grep -A2 VGA
[20:57] <EriC^^> should say the graphics card and current driver in use
[20:57] <Bashing-om> cloaked1: Is there a particular reason for 'single user mode ' ? the boot parameter " systemd.unit=multi-user.target " will boot with netowrking . esle once can acivate networking in single with ' systemctl enable NetworkManager.servocesystemctl enable NetworkManager.service ; systemctl start NetworkManager.service ' . In my little experience .
[20:57] <Gh0st-> EriC^^: yeah I can see
[20:57] <bekks> meoneteh: Did you try putting that exact message into the search engine of your choice? ;)
[20:58] <Gh0st-> EriC^^: how would I know that it is working fine?
[20:58] <BlackFlag> mstfa, http://pastebin.com/bL536W2s
[20:58] <meoneteh> bekks ; yes , but i didnt find a solution
[20:58] <EriC^^> Gh0st-: oh, just remembered, go to the dash and type additional drivers
[20:59] <Gh0st-> EriC^^: ?
[20:59] <mstfa> BlackFlag: I take it you're using Xubuntu?
[20:59] <Bashing-om> cloaked1: Bad paste . try as " systemctl enable NetworkManager.service ; systemctl start NetworkManager.service " .
[21:00] <EriC^^> Gh0st-: it should say what the recommended driver is and any options you have for other ones
[21:00] <Gh0st-> dash: 5: additional: not found
[21:00] <EriC^^> Gh0st-: i mean the first icon in the launcher to the left
[21:00] <bekks> meoneteh: Doing it shows plenty of results to me.
[21:01] <EriC^^> Gh0st-: this command should give info about unity /usr/lib/nux/unity_support_test -p
[21:01] <BlackFlag> mstfa, I did apt-get install xubuntu-desktop over the standart ubuntu
[21:01] <Gh0st-> oh got it
[21:01] <Gh0st-> sorry :)
[21:01] <BlackFlag> EriC^^, the output is "Use netcat."
[21:01] <meoneteh> bekks : am reading and searching but nothing usefull found
[21:01] <meoneteh> till now
[21:01] <mstfa> BlackFlag: It says there's an authentication failure, it's possible that your user folder wasn't properly updated.
[21:02] <EriC^^> BlackFlag: ok, type sudo apt-get install pastebinit , then dpkg -l | grep nvidia | pastebinit
[21:02] <mstfa> BlackFlag: try the following: $ sudo chown -R <user>:<user> /home/<user>
[21:03] <pri> HELP Hello can anyone help me with Ubuntu on Surface ?
[21:04] <pri> I want to boot Ubuntu from USB, but I cannot select 'Try ubuntu' on BIOS screen
[21:04] <OerHeks> pri,  what surface, 1 2 or 3?
[21:05] <pri> OerHeks Surface 3
[21:05] <meoneteh> bekks ; the qs is why google earth is not connecting with the servers , do i need to configure my router and open some ports ?
[21:05] <TJ-> meoneteh: What login details are you trying? Google Earth Pro went 'free' some time ago so the login changed to be your usual G.E. login email address and the licence "GEPFREE" ?
[21:05] <Gh0st-> EriC^^: fan is still constantly on
[21:06] <pri> OerHeks, can you please please help ? I have tried everything, I can move up and down using the volume buttons but there is no way I can select
[21:06] <bekks> meoneteh: No, you dont need to do that.
[21:06] <EriC^^> Gh0st-: what does top show?
[21:07] <Gh0st-> EriC^^: still firefox
[21:07] <Gh0st-> 33%
[21:07] <Gh0st-> 43%
[21:07] <Gh0st-> 92%
[21:07] <EriC^^> odd
[21:07] <meoneteh> TJ-> what do you mean , note do i need to  use my gmail account or something ?
[21:07] <OerHeks> pri, nope, no clue with that one, maybe someone else here in this channel ?
[21:07] <Gh0st-> EriC^^: is there any other browser?
[21:08] <EriC^^> Gh0st-: there's chrome
[21:08] <Gh0st-> ok let me have it
[21:08] <pri> OerHeks, do you know about the other Surface ?
[21:08] <EriC^^> https://www.google.com/chrome/browser/desktop/index.html
[21:08] <pri> 1 or 2 ?
[21:08] <EriC^^> Gh0st-: ^
[21:09] <OerHeks> pri, according to this post, you need an USB keyboard http://www.geek.com/microsoft/linux-users-rejoice-heres-ubuntu-on-the-surface-pro-3-1594864/
[21:09] <TJ-> meoneteh: There used to be 2 versions of G.E.: 'free' and 'pro' (paid for plus extra features). All features became free and 'pro' version login/licence was changed to be the same for everyone. I wondered if you'd configured it with login info that is incorrect now
[21:09] <OerHeks> pri, and then a lot of tweaking :-(
[21:10] <TJ-> meoneteh: otherwise, if there is a genuine network connection problem, I'd suspect the wine configuration (it looks as if you are using the Windows version, not Linux)
[21:10] <pri> OerHeks, but there is only one USB port in the device. I have a wireless keyboard using USB emitter that I connecter using a cable, but it does not work :(
[21:10] <BlackFlag> Thank you mstfa, and EriC^^ ! I will try later.
[21:11] <mstfa> BlackFlag: good luck!
[21:11] <EriC^^> BlackFlag: np, try an older kernel, it might work, also installing the headers and reinstalling the nvidia driver might help
[21:11] <Gh0st-> EriC^^: on it now
[21:11] <Gh0st-> EriC^^: how can I see my Fan speed and what causing it to go faster?
[21:11] <meoneteh> TJ-> i didnt install wine and i follewed this tutorial https://help.ubuntu.com/community/GoogleEarth
[21:11] <EriC^^> Gh0st-: firefox is making it go faster i think
[21:12] <Gh0st-> EriC^^: yeah I can see the difference now
[21:12] <Gh0st-> :/
[21:12] <meoneteh>  TJ- ; should i change my installation method ?
[21:12] <Gh0st-> I can bearly hear it
[21:12] <Gh0st-> EriC^^: I want the MAC theme on it? which one would you recommend?
[21:12] <EriC^^> Gh0st-: sudo apt-get install lm-sensors , then type sensors to see the cpu temp
[21:13] <EriC^^> !themes | Gh0st-
[21:13] <Gh0st-> EriC^^: is there any same like MAC?
[21:13] <EriC^^> i think so
[21:14] <kevin> v+
[21:14] <TJ-> meoneteh: No. The screenshot dialogs looked a lot like the wine/windows renderings. If you installed the linux version it should be good. Check the PC can connect to the server that is reported as a problem "ping kh.google.com"
[21:14] <coffeeguy> can one use partitioner while logged into ubuntu
[21:15] <MonkeyDust> coffeeguy  can you repair a car while driving?
[21:15] <wileee> coffeeguy, For what exactly?
[21:15] <TJ-> coffeeguy: Yes - but whether what you want to do with it is sane depends on the detail
[21:15] <coffeeguy> i have a 3tb drive i'd like to split up, it's doesn't have the ubuntu os on it
[21:15] <meoneteh> TJ- : i can ping  kh.google.com
[21:16] <TJ-> meoneteh: That's good then. When pinging that server does a fresh start of G.E. still report the error?
[21:17] <TJ-> meoneteh: also; is your local network/gateway using IPv6?
[21:17] <meoneteh> TJ- : yes it does
[21:17] <coffeeguy> ubuntu is on an ssd, and the 2nd drive is storage but all ntfs with some things i'd like to keep on it but would like to make part of it etf
[21:17] <coffeeguy> linux fs*
[21:18] <TJ-> meoneteh: Is this the first time you've used G.E. from this PC and user?
[21:18] <meoneteh> TJ- : yes
[21:18] <TJ-> meoneteh: in other words - could there be a previous log-in configuration file causing confusion
[21:18] <meoneteh> am using ipv4
[21:18] <TJ-> meoneteh: I thought you were but worth asking.
[21:19] <meoneteh> TJ- ;no absolotly not i've just installed lubuntu today
[21:19] <coffeeguy> i think i just need to get g-partition
[21:20] <meoneteh> TJ ; i read those forum that suggested the ipv6 have something to do with this
[21:20] <TJ-> meoneteh: I wonder if your local ISP/country is filtering/blocking the G.E. site
[21:21] <TJ-> meoneteh: Well, I can reach kh.google.com using IPv4 and IPv6
[21:21] <TJ-> meoneteh: what IP address are you given when doing "dig +short kh.google.com"
[21:21] <meoneteh> TJ- ; i cant reach it from the browser only from terminal with ping command
[21:23] <meoneteh> TJ- ; http://paste.ubuntu.com/12831541/
[21:23] <TJ-> meoneteh: which is why I wonder about some kind of ISP filter - web-sites use TCP protocol port 80 and is often filtered; ping uses ICMP
[21:24] <meoneteh> TJ-; how can you be so sure  ?
[21:25] <meoneteh> TJ- ; and can i bypass that if thats the case ?
[21:25] <dm_comp> join #kvm
[21:25] <dm_comp> sorry
[21:25] <TJ-> meoneteh: I tested accessing the first server on your list and get what appears to be a genuine Google server response
[21:26] <meoneteh> TJ- ; which means ?
[21:26] <TJ-> meoneteh: try this.. "wget -O - 64.233.184.93:80/" ... do you see a LOT of raw HTML/Javascript ?
[21:27] <TJ-> meoneteh: I see that ending with "if(google.j&&google.j.en&&google.j.xi){window.setTimeout(google.j.xi,0);} "
[21:30] <meoneteh> TJ- ; yes , somthing like that http://paste.ubuntu.com/12831677/
[21:30] <TJ-> meoneteh: OK, so it looks like a local PC problem for sure, not a network filtering issue
[21:32] <TJ-> meoneteh: is your PC/user account configured to use a HTTP proxy ?
[21:32] <meoneteh> TJ- ; am not sure , how can i check that ? but am not using any proxy
[21:32] <meoneteh> or vpn
[21:33] <mrrobot_> list
[21:33] <mrrobot_> lista
[21:33] <bekks> !list | mrrobot_
[21:33] <mrrobot_> come faccio a vedere la lsita
[21:34] <TJ-> meoneteh: let's check all the libraries G.E. requires are installed: do "ldd $(which googleearth-bin | grep 'not found' "
[21:35] <TJ-> meoneteh: sorry, a typo there... "ldd $( which googleearth-bin) | grep 'not found' "
[21:38] <meoneteh> TJ- ; it says  ldd: missing file arguments
[21:38] <TJ-> meoneteh: hmm, maybe 'which' didn't find the path to the executable
[21:38] <meoneteh> http://paste.ubuntu.com/12831922/
[21:39] <TJ-> meoneteh: where is G.E. installed? under /opt/google/earth/free/ ?
[21:39] <meoneteh> TJ-> ; Yes
[21:40] <TJ-> meoneteh: try putting the path in manually: "ldd /opt/google/earth/free/googleearth-bin | grep 'not found' "
[21:41] <meoneteh> TJ- : http://paste.ubuntu.com/12831997/
[21:41] <Gh0st-> EriC^^: Thanks a lot for all your time and support dude!
[21:41] <EriC^^> Gh0st-: no problem!
[21:42] <Gh0st-> EriC^^: I am not using MAC theme
[21:42] <Gh0st-> now*
[21:42] <Gh0st-> :)
[21:42] <TJ-> meoneteh: Aha! we make progress
[21:42] <EriC^^> nice :)
[21:42] <meoneteh> TJ- : it says not found
[21:42] <NathanielHill> Hi, I'm trying to install ubuntu-server-amd64 on my laptop from USB and it says it cannot mount the install CDROM??
[21:43] <NathanielHill> is this a virtual drive it's trying to mount or what?
[21:44] <TJ-> meoneteh: Let's start with "sudo ldconfig /opt/google/earth/free"  then do "ldd /opt/google/earth/free/googleearth-bin | grep 'not found' " again; this time there should only be 1 library not found
[21:46] <TJ-> NathanielHill: which Ubuntu release? There's a known issue when the installer cannot find its own media device
[21:46] <NathanielHill> TJ-: 14.04.3
[21:46] <NathanielHill> TJ-: I was trying to use the minimal iso since I have no bandwidth here and will not use ubuntus desktop setup anyway
[21:47] <NathanielHill> TJ-: that didnt work, so now trying server iso
[21:47] <meoneteh> TJ- ; no library at all http://paste.ubuntu.com/12832079/
[21:48] <NathanielHill> TJ-: also, the minimal iso's are not EFI bootable
[21:49] <meoneteh> TJ- ; am not sure what that indicates ?
[21:50] <TJ-> meoneteh: Well, that is good! no missing libraries. Try restarting G.E. now
[21:51] <Gh0st-> EriC^^: what would you recommend to do on Ubuntu for newbies?
[21:52] <TJ-> NathanielHill: the installer is failing to find the device it is running from. There are several possible causes unfortunately, from buggy firmware confusing the OS, to strange interaction of the USB ports, and of course corrupted bits on the media itself, or corruption whilst reading the media
[21:52] <EriC^^> Gh0st-: the click to minimize the launcher icon is nice
[21:53] <EriC^^> Gh0st-: get the mp3 codecs and stuff from the restricted-extras
[21:53] <TJ-> NathanielHill: comment #2 in this forum thread is one issue that can occur: http://ubuntuforums.org/showthread.php?t=1550317
[21:53] <Gh0st-> restricted-extras?
[21:53] <meoneteh> TJ- ; am going to do a restart and see
[21:55] <EriC^^> Gh0st-: yeah you enable the multiverse repo and install it
[21:55] <EriC^^> also enable the universe repo too
[21:55] <Gh0st-> :) and how would I do that?
[21:55] <EriC^^> Gh0st-: dash > software and sources
[21:57] <jasondockers> Waht is the shortcut to bring up the multiple monitors bar / menu?
[21:57] <jasondockers> To extend monitors
[21:58] <Twinkletoes> Due to the network config of my provider (gateway on non-reachable address), I've got to setup a separate box which I just want to forward packets in both directions across interfaces. Using ufw and a POSTROUTING rule in the *nat table, I can get outbound working, but not inbound. What would I need?
[21:58] <Twinkletoes> Is this what they call 1:1 NAT, and what would the ufw setup be for this?@
[22:01] <jasondockers> I can't use my monitors without that keyboard shortcut
[22:01] <jasondockers> the normal settings don't work
[22:01] <jasondockers> it's a bug, I believe
[22:02] <Gh0st-> EriC^^: okie doke!
[22:02] <Gh0st-> EriC^^: :) THanks
[22:03] <jasondockers> Ghostler?
[22:03] <Gh0st-> jasondockers: ?
[22:03] <jasondockers> Ubuntu is completely useless. It hasn't answered a single question I've ever had over the span of years.
[22:04] <EriC^^> Gh0st-: no problem
[22:04] <dl9> Hey Every one
[22:04] <dl9> www.hacoder.com
[22:04] <Twinkletoes> Gh0st: I don't think he understands that people here are jsut normal people, not ubuntu support
[22:05] <dl9> ME?
[22:05] <Gh0st-> Twinkletoes: lol
[22:05] <Gh0st-> perhaps
[22:05] <redwolf> tsimonq2, ping
[22:05] <tsimonq2> redwolf: thanks, it works like I want to...carry on!
[22:06] <redwolf> :)
[22:12] <Panoramix> Need some help with an Ubuntu box
[22:12] <NathanielHill> How can I see where my usb devices are in /dev on an install shell?
[22:12] <NathanielHill> no lsusb and dmesg isnt helping
[22:12] <daftykins> Panoramix: ask
[22:14] <Panoramix> Ubuntu 14 installed a few months ago in a windows/linux mixed set of machines. was working fine till 2 days ago: suring net, accessing network printers, accessing windows shares from linux, accessing linux shares from windows, etc...
[22:14] <wileee> NathanielHill, fdisk ?
[22:14] <NathanielHill> wileee: not available
[22:14] <TJ-> NathanielHill: Trying to remember what is available in the installer shell... maybe "lsblk" or "blkid" ?
[22:14] <wileee> NathanielHill, Ah, was not sure if you had a cli on the mini
[22:15] <NathanielHill> im in cli on 14.04-server iso now
[22:15] <wileee> or more there heh
[22:15] <TJ-> NathanielHill: "cat /proc/partitions", also  "ls -l /sys/block/*"
[22:15] <NathanielHill> mini is does not recognize wireless card, server iso does not mount iso correctly
[22:15] <NathanielHill> lucky me
[22:15] <Panoramix> Installed frostwire and deluge After that no DNS resolution. I can still access the shares both ways, I can print to the network printers
[22:16] <Panoramix> Uninstalled frostwire and deluge . rebooted, same.
[22:16] <wileee> NathanielHill, You have grub onboard to boot with?
[22:16] <wileee> the HD
[22:16] <NathanielHill> wileee: well, looks like the is is mounted to /media
[22:16] <NathanielHill> wileee: how do I tell the installer where to find it?
[22:16] <wileee> I wondered if media
[22:16] <daftykins> Panoramix: check /etc/resolv.conf
[22:16] <Panoramix> I can ping 8.8.8.8 and others, I cannot resolve DNS
[22:16] <NathanielHill> wileee: no, haven't actually touched the HD yet still original windows image
[22:16] <wileee> NathanielHill, You would have grub find the iso
[22:17] <Panoramix> Idid \
[22:17] <NathanielHill> wileee: well, it finds it fine and boots into the installer, then the installer says CDROM not found
[22:17] <TJ-> wileee: it's not GRUB; it's the debian-installer failing to find the media it is running from :)
[22:17] <daftykins> NathanielHill: sounds like your media is busted.
[22:17] <Panoramix> Sorry.  I did rebuild the link for resolv.conf:  sudo dpkg-reconfigure resolvconf.
[22:17] <daftykins> Panoramix: what does it contain...
[22:17] <wileee> TJ-, True, I was going to reword that correct, I use grml
[22:17] <Panoramix> Did    Added 8.8.8.8 and 8.8.4.4 in the resolver.
[22:18] <Panoramix> Commented out the dns=dnsmasq line in /etc/NetworkManager/NetworkManager.conf.
[22:18] <daftykins> "the resolver"
[22:18] <Panoramix> Verified nmcli dev list iface eth0 | grep IP4.DNS: IP4.DNS[1]: 192.168.1.1 IP4.DNS[2]: 8.8.8.8 IP4.DNS[3]: 8.8.4.4
[22:18] <daftykins> you should purge resolvconf and hardcode resolv.conf
[22:18] <Panoramix> Did that already
[22:18] <daftykins> right so 1.1 is your first
[22:19] <Panoramix> Found that port 53 is closed
[22:19] <NathanielHill> I used rufus to make the usb, I could try dd mode instead of iso mode; or try pendrive linux maybe?
[22:19] <daftykins> test a manual query to google DNS
[22:19] <Panoramix> But no firewall
[22:19] <daftykins> sudo iptables -L
[22:19] <TJ-> Panoramix: what nameserver is /run/resolvconf/resolv.conf pointing to?
[22:19] <Panoramix> Did ping 8.8.8.8. That works. Ping www.yahoo.com fails
[22:19] <nineoh8> Hey, I've had some problems installing wine on my new kubuntu install
[22:20] <nineoh8> It says that wine is unable to be found?
[22:20] <Panoramix> seems DNS functionalities went down the drain
[22:20] <wileee> nineoh8, What release? You've run an update?
[22:21] <nineoh8> Latest release
[22:21] <nineoh8> I can't use my wireless adapter without running the exe, so I can't connect to interent
[22:21] <nineoh8> exe in the install disc that is
[22:21] <daftykins> Panoramix: so as i said, test a manual query
[22:22] <nineoh8> Is there any workaround to not having internet connection when trying to install wine?
[22:22] <nineoh8> From what I've seen online the wine package is found even without internet connection
[22:23] <daftykins> download it and copy it over, then install the .deb
[22:23] <Panoramix> daftykins, using dig? fails just the same
[22:23] <daftykins> you'll need all dependencies too
[22:23] <NathanielHill> So, I'm trying to install ubuntu without getting all the desktop bloat (I'll use a lightweight wm, mostly terminal work). I've tried the minimal iso, now trying the server iso, then onto the desktop iso if I have to. Is there an easy way to see/remove installed packages with apt-get?
[22:23] <NathanielHill> Or can someone point me to a good tutorial on debloating?
[22:23] <daftykins> NathanielHill: can you not just install with a wired network connection first, instead of desiring wifi?
[22:23] <YamakasY> why should we use mutliple mx records @ the office location today when the router is HA ? ofcourse there are external MX records for backup
[22:23] <daftykins> it'd make life roughly a billion times easier.
[22:23] <NathanielHill> daftykins: laptop without ethernet
[22:24] <daftykins> really? nasty.
[22:24] <nineoh8> Where do I download it from?
[22:24] <daftykins> YamakasY: that is not ubuntu support.
[22:24] <nineoh8> The links I've seen don't work with windows
[22:24] <NathanielHill> I'm an ubuntu newbie, but not a unix noob
[22:24] <daftykins> nineoh8: packages.ubuntu.com
[22:24] <Flannel> NathanielHill: The server ISO will get you what you want.
[22:24] <TJ-> NathanielHill: My first check would be to generate a hash of the downloaded ISO *and* the data on the media, and ensure they're both as published on the download pages
[22:25] <YamakasY> daftykins: nope, so, I still run it all on Ubuntu ;)
[22:25] <kavaguy> hi is ubuntu 14.04 ext4 fs?
[22:25] <YamakasY> kavaguy: yes
[22:25] <daftykins> YamakasY: that's nice, doesn't make your query relevant to this channel.
[22:25] <NathanielHill> Flannel: yeah, I'm hoping that will work, but having problems at the moment.
[22:25] <kavaguy> ty YamakasY :)
[22:25] <YamakasY> daftykins: I don't see anyone else complaining yet ;)
[22:25] <Panoramix> daftykins no bind nothing
[22:25] <NathanielHill> Can I just do something like apt-get purge ubuntu-desktop? Will that remove recursively?
[22:25] <TJ-> NathanielHill: if those match then we know the issue isn't caused by corruption of the media. It could still be caused by read errors. I've seen some people solve that one simply by using a different USB port :s
[22:25] <daftykins> YamakasY: ##networking .
[22:26] <YamakasY> daftykins: those are fools and don't know that much
[22:26] <NathanielHill> TJ-: tried other port, no luck :/
[22:26] <TJ-> NathanielHill: no; it won't remove the packages it depends on
[22:26] <daftykins> YamakasY: you must be there already then :)
[22:26] <YamakasY> people playing at home with ther homelabs
[22:26] <TJ-> NathanielHill: did you generate a hash of the image on the USB though?
[22:26] <YamakasY> daftykins: nope
[22:26] <NathanielHill> TJ-: no, i mean will it remove all the packages that depended on it, so i dont have loose packages hanging around?
[22:27] <Panoramix> daftykins running sudo nmap 192....(local ip) -p53 and sudo nmap 192....(local ip) -p53 -sU shows the port closed for tcp and udp
[22:27] <TJ-> NathanielHill: no it won't - those are the dependencies I was talking about. A > depends > B ... 'apt-get purge A' leaves B.
[22:28] <NathanielHill> TJ-: well that sucks. is there a command to remove dangling packages like that?
[22:29] <daftykins> Panoramix: you can't scan yourself
[22:29] <TJ-> NathanielHill: not when the 'master' package is a virtual package. It works indirectly when A > depends > libB and you do "apt-get remove A", with follow-up "apt-get autoremove" that will remove libB if no other package depends on it
[22:29] <Gh0st-> EriC^^: found this and it's very interesting
[22:29] <Gh0st-> http://www.unixmen.com/top-things-to-do-after-installing-ubuntu-15-04/
[22:30] <daftykins> ugh those are the typical articles that speak of filling your system with nasty PPAs that will ruin your time
[22:31] <gunter> Pestalozzi20
[22:32] <Gh0st-> daftykins: really?
[22:33] <daftykins> usually, i didn't click to find out
[22:33] <Gh0st-> hmm
[22:33] <Gh0st-> seems good to me
[22:33] <samsung> hi
[22:33] <samsung> which ubuntu distro do you like?
[22:33] <bekks> samsung: "Ubuntu".
[22:34] <samsung> which version
[22:34] <bekks> samsung: The supported ones. :)
[22:34] <samsung> but there are forks
[22:34] <bekks> samsung: Forks arent supported in here.
[22:35] <samsung> bekks are you a bot or a human?
[22:35] <bekks> samsung: How does that matter?
[22:35] <nineoh8> So I downloaded wine onto a usb and plugged it into my new desktop, but kubuntu isn't recognizing it?
[22:35] <daftykins> nineoh8: what file system does it use?
[22:35] <samsung> So I know which questions to ask you
[22:36] <bekks> samsung: Ubuntu support relevant questions.
[22:36] <nineoh8> It recognizes it when showing up in the usb device manager though
[22:36] <nineoh8> I'm not sure, just a basic kingston usb
[22:36] <kavaguy> hi how do i make an disk read write for a user, can't seem to do it in Files
[22:36] <bekks> samsung: And polls about Ubuntu-forks arent relevant to support :)
[22:36] <samsung> Tell me ubuntu's biggest technical secret or trick
[22:36] <nineoh8> I have used it in windows computers before if that answers anything
[22:37] <bekks> samsung: Do you have an actual ubuntu support question?
[22:37] <NathanielHill> Well, got past that problem by using Rufus in dd mode instead of iso mode. Now, the server iso doesn't recognize my wireless card either :/
[22:37] <samsung> Yes what is a feature unbuntu has that the others don't that I can use
[22:37] <k1l_> samsung: the unity desktop, for example
[22:37] <daftykins> it's an OS, just use it
[22:38] <samsung> I like powerful features and it would be nice if you could teach me
[22:38] <daftykins> 'powerful features' = nonsense
[22:38] <samsung> I have experimented with distros before
[22:38] <samsung> What is ubuntu most enhanced in?
[22:39] <votlon> I've expieremented with my computer before :/ turns out its not a place for genitals
[22:39] <k1l_> samsung: this channels focus is on solving technical issues with ubuntu. if you want to chat (about ubuntu) then better ask in #ubuntu-offtopic
[22:39] <NathanielHill> samsung: you're like a clickbait article personified
[22:39] <daftykins> nineoh8: try "sudo parted -l" and read what file system is beside your flash drive, it might be /dev/sdb if you have one hard disk, or /deb/sdc if you have two... etc.
[22:40] <NathanielHill> Okay, I found someone who said they installed 14.10 and the installer had drivers for their wireless card (hp stream 11). Any reason why 15.04 installer wouldn't also include those drivers? Wanting to know if I should play it safe with 14.10 iso or 15.04 iso... It'll take me 2 or 3 hours to download each
[22:41] <daftykins> 14.10 is EOL so don't install that.
[22:41] <NathanielHill> daftykins: eol?
[22:41] <daftykins> !eol
[22:41] <NathanielHill> daftykins: can I update after install to a newer version?
[22:42] <Panoramix> quit
[22:42] <daftykins> NathanielHill: yeah but that'd be pointless - it'd make more sense to get the wifi working on whichever you have
[22:43] <votlon> Is there a way to roll back from 14.04.3 to 14.04.1?
[22:43] <daftykins> what is the wifi device in your system?
[22:43] <daftykins> votlon: no
[22:43] <votlon> darn :/
[22:43] <daftykins> what's wrong?
[22:43] <k1l_> votlon: you mean the  kernel and xserver?
[22:43] <NathanielHill> daftykins: well, at this point I just want to get running on the machine and I have a slow connection here to keep downloading isos
[22:43] <daftykins> NathanielHill: right but an upgrade would be worse than downloading both ISOs
[22:44] <nineoh8> daftykins I tried that and it came back with parted: invalid option -- '1'
[22:44] <votlon> Na i just installed a webserver using 14.04.3 and noticed the eol for it was aug 2016, and i wanted the 2019 supported version
[22:44] <scs> hi, is anyone able to help me with vnc?
[22:44] <daftykins> nineoh8: it's a lowercase L
[22:45] <daftykins> scs: not until you ask the channel a question :)
[22:45] <scs> How can i get the vnc connection to use the same desktop as the one i would see if i connected the machine to a monitor?
[22:45] <NathanielHill> daftykins: I won't always have a slow connection
[22:45] <nineoh8> oh ok it came back with /dev/sda
[22:46] <nineoh8> and a warning:error fsyncing/closing /dev/sdb: Input/output error
[22:46] <k1l_> votlon: that is for the kernel. 14.04.3 got the 15.04 backports kernel as default. you can change that back to the original 14.04 kernel (3.13) orchange the kernel to the 16.04 backports kernel when the support for the 14.04.3 kernel ends
[22:46] <daftykins> nineoh8: that'll be your hard disk, if there isn't a /dev/sdb or other, try your flash drive in another USB port
[22:46] <k1l_> !enablementstack | votlon
[22:47] <votlon> Oh awesome thank you
[22:47] <NathanielHill> daftykins: well, im looking through dmesg on the installer shell but of course I see nothing. I know it's a broadcom chip
[22:47] <daftykins> NathanielHill: you can't 'lspci' right now?
[22:48] <NathanielHill> daftykins: BCM43142
[22:48] <daftykins> !broadcom
[22:48] <scs> any ideas?
[22:48] <nineoh8> daftykins it shows up in the usb device manager though, I've already tried different slots
[22:48] <daftykins> i have no idea what you mean by 'USB device manager'
[22:49] <nineoh8> There is a usb devices - kde control module app that lists the usb devices attached to the computer
[22:49] <daftykins> oh KDE, never used
[22:50] <nineoh8> kingston shows up, but not in my file manager
[22:50] <NathanielHill> daftykins: im being dense, I just realized the server iso doesn't actually need the wifi driver to do an install.
[22:50] <daftykins> ;]
[22:50] <NathanielHill> daftykins: was stil stuck in netinstall mindset
[22:51] <daftykins> of course you'll still be a tad limited afterward unless you can get the broadcom driver going in pure CLI server
[22:51] <daftykins> but i'm certain that's workable.
[22:53] <nineoh8> no way to start an installation disc without running exe files is there?
[22:53] <NathanielHill> daftykins: Looks like the desktop iso includes the drivers, is there an option to only do a minimal install from the desktop iso?
[22:53] <daftykins> no
[22:53] <TJ-> NathanielHill: you could manually, using debootstrap manually, instead of using the ubiquity/d-i seeds
[22:54] <TJ-> NathanielHill: you might also be able to start ubiquity manually and use a command-line argument to tell it to install the server seed
[22:54] <imthenachoman> hey guy. i'm having some trouble using rsync with exclude. please advise. http://paste.ubuntu.com/12833416/
[22:55] <bekks> imthenachoman: rsync -avzpAn --exclude="/data/backup/one/ding\ bingo" "${BACKUP_PATHS[@]}" user@server:/some/destination/path
[22:55] <bekks> imthenachoman: Note the \
[22:56] <TJ-> NathanielHill: looking at the ubiquity --help, doesn't look like setting a server seed is easy
[22:56] <imthenachoman> bekks: still does it
[22:56] <knawk> I'm trying to make evmapd but I'm missing <cfg+.h> and can't find a package to install it
[22:57] <daftykins> !info libcfg-dev
[22:58] <daftykins> no idea if that's what you're after
[22:58] <NathanielHill> TJ-: I'm just going to bite the bullet and install from the desktop iso, then worry about deleting the bloat later
[22:58] <knawk> I tried installing that but make still complains that it can't find cfg+.h... Do I need to do anything after apt-get installing the package?
[22:58] <NathanielHill> TJ-: It'll probably be a good way to learn apt-get anyways
[22:59] <jni> hi
[23:00] <jni> ,jkyuyyuty
[23:01] <NathanielHill> Hell, it can't be any harder than learning Portage
[23:04] <jni> hi
[23:06] <jni> hi
[23:06] <nineoh8> Okay, so I restarted my computer, and now kingston is recognized and I can get into it
[23:07] <nineoh8> but the wine package I can't install because it doesn't satisfy dependencies
[23:07] <daftykins> yeah so read the deps from the packages.ubuntu.com site as i said, then download them all
[23:07] <nineoh8> ok
[23:08] <TJ-> !info apt-offline | nineoh8
[23:12] <jni> bobb
[23:12] <jni> hi what is yopur na mr r
[23:13] <daftykins> jni: english please :)
[23:14] <samsung> what is a way to shorten boot time on ubuntu?
[23:14] <daftykins> buy an SSD
[23:15] <samsung> I already have an SSD and want to optimize booting with config edits
[23:15] <jni> hi where are u from
[23:15] <votlon> jni: you clowning dog
[23:16] <daftykins> samsung: nope.
[23:16] <samsung> Other than SSDs is there any way at all to cut ubuntu boot times?
[23:16] <cfhowlett> !ot | jni, this is ubuntu support.  ask ubuntu questions.  for chitchat, go to other channels
[23:16] <kavaguy> How do i make me the owner of a volume
[23:17] <cfhowlett> samsung, reduce the number of programs that autostart
[23:17] <kavaguy> chmod? something
[23:17] <knawk> What's the best way to remap buttons on a graphics tablet?
[23:17] <daftykins> kavaguy: 'volume' ?
[23:17] <kavaguy> disk
[23:17] <daftykins> kavaguy: you mean you mounted a disk to a path?
[23:17] <bekks> kavaguy: Which disk?
[23:17] <daftykins> yeah so sudo chown -R username: /mount/point/
[23:17] <kavaguy> kk thanks daftykins
[23:17] <daftykins> though it has to be a Linux file system.
[23:17] <ShinyLinoone> Hello
[23:18] <kavaguy> it is
[23:18] <samsung> how do I edit the list of programs that autostart
[23:18] <ShinyLinoone> I kinda need some help with something
[23:18] <cfhowlett> !ask | ShinyLinoone
[23:18] <samsung> !patience
[23:19] <Mirodroid> samsung, there are ways to shorten boot times regargless of which distro you are using by only having the serives and modules you need load up during boot and nothing more and also not using systemd
[23:19] <samsung> ok, but where do i disable those services and systemd, i want to learn
[23:20] <ShinyLinoone> I am trying to run a Windows 95 disc on 14.04 and it won't mount.  Whenever I try to do anything to it I get the same error message:  Unable to access “621 MB Volume” -  Not authorized to perform operation.  The disc has a program that WineHQ says can be run on Ubuntu via Wine.
[23:20] <Mirodroid> samsung, there are guids on how to do so that are only a short google search away, and there are guides on the internet that are free and opensource
[23:20] <bekks> samsung: you dont want to disable systemd, it will render your system unbootable.
[23:20] <Mirodroid> bekks, no it wont... just use sysinit
[23:20] <daftykins> ShinyLinoone: run it why, fancy playing that Weezer music video?
[23:20] <samsung> why did they propose to not use systemd then?
[23:20] <bekks> Mirodroid: sysinit is quite dead nowadays.
[23:20] <ShinyLinoone> Huh?
[23:20] <Mirodroid> bekillin, there are many alternitives to systemD as shown by ddwrt, uclinux, and android
[23:21] <Mirodroid> bekks, no it isnt
[23:21] <bekks> samsung: systemd parallelizes the startup of services, sysinit doesnt.
[23:21] <Mirodroid> bekks, it is quite alive
[23:21] <ShinyLinoone> What were you asking, daftykins?
[23:21] <cfhowlett> ShinyLinoone, virtualbox + windows is the normal way
[23:22] <samsung> are you saying i need to choose between systemd and sysinit
[23:22] <daftykins> ShinyLinoone: my sentence has what i was asking in the form of words with a ? mark
[23:22] <Mirodroid> bekks, agian installing something to replace systemd will NOT break your system
[23:22] <samsung> mirodroid how confident are you, have you tested your theory sufficiently
[23:22] <ShinyLinoone> cfhowlett, this cd should be runnable in Wine, though.
[23:22] <Mirodroid> samfty, http://without-systemd.org/wiki/index.php/Init
[23:22] <Mirodroid> err
[23:22] <Mirodroid> samsung, http://without-systemd.org/wiki/index.php/Init
[23:23] <ShinyLinoone> daftykins, and I don't understand what that question meant.
[23:23] <Mirodroid> samsung, i saw some demos of boot times during a large linux conference in the area
[23:23] <daftykins> ShinyLinoone: focus on the first three words.
[23:23] <ShinyLinoone> Why do I want to run it?
[23:23] <ShinyLinoone> Sonic 3D Blast, that's why.
[23:23] <cfhowlett> ShinyLinoone, wine is not the recommended way to run an entire OS
[23:24] <ShinyLinoone> cfhowlett, it's not Windows 95, it's a program made for Windows 95
[23:24] <Mirodroid> bekks, BSD doesnt use systemD btw
[23:24] <samsung> is it true that if neither sysinit nor systemd nor another alternative is used that the system is unbootable?
[23:24] <daftykins> right but you're saying you're trying to run a win95 ISO in wine, that's not gonna happen
[23:24] <bekks> Mirodroid: Well, this isnt BSD, but Ubuntu ;)
[23:24] <Mirodroid> correct
[23:24] <ShinyLinoone> daftykins, I'm not trying to run the OS, I'm trying to run a program made for the OS -_-
[23:25] <Mirodroid> and one that allows for alteritives and user choice
[23:25] <samsung> do you consider systemd the default one and is sysinit a popular alternative? is it stable?
[23:25] <Mirodroid> the freedom to chose what init they will use
[23:25] <Mirodroid> sysinit is nearly 60 years old
[23:25] <daftykins> ShinyLinoone: and yet you came in saying 'windows 95 CD'
[23:25] <Mirodroid> pretty damned sure its stable
[23:25] <samsung> i heard parallization earlier did they mean hyperthreading on the cores
[23:25] <ShinyLinoone> I thought it was implied that I meant a CD made for 95
[23:25] <Mirodroid> systemd is newer but has many more features and some call it robust
[23:26] <ShinyLinoone> Because running an OS in Wine makes no sense
[23:26] <daftykins> ShinyLinoone: no, it was not.
[23:26] <daftykins> ShinyLinoone: this is a beginners help channel, we get asked where the penguin is.
[23:26] <bekks> samsung: parallelization of running programs has nothing to do with hyperthreading on the cores.
[23:26] <cfhowlett> too true ...
[23:26] <ShinyLinoone> Well, now that you know what I mean, is there anything you can do to help?
[23:26] <votlon> daftykins: speaking of where is the penguin?
[23:26] <samsung> bekks which difference is there
[23:26] <daftykins> !appdb | ShinyLinoone
[23:27] <daftykins> votlon: it's a closely guarded secret ;)
[23:27] <bekks> samsung: Running programs ins parallel means running programs in parallel.
[23:27] <Mirodroid> samsung, http://www.zdnet.com/article/linus-torvalds-and-others-on-linuxs-systemd/
[23:27] <ShinyLinoone> daftykins, the problem isn't running what is on the CD, it's mounting the CD itself
[23:27] <ShinyLinoone> It won't mount
[23:27] <daftykins> ok so show us your mount command and the output in a pastebin.
[23:27] <ShinyLinoone> I can't access its contents
[23:27] <daftykins> you're still gonna need to read the above for the next step :)
[23:27] <ShinyLinoone> Alright, how do I do the mount command in terminal?
[23:28] <cfhowlett> ShinyLinoone, open a terminal.  mount | nc termbin.com 9999
[23:29] <ShinyLinoone> http://pastebin.com/qSnzLU2C
[23:29] <samsung> how many seconds do i expect to typically gain with sysinit instead of systemd
[23:29] <Mirodroid> not much
[23:29] <daftykins> samsung: ubuntu isn't for Linux ricers, i would say.
[23:29] <Mirodroid> systemd has a nice feature of letting you know your boot time
[23:30] <samsung> are there cases where sysinit is slower than systemd
[23:30] <Mirodroid> samsung, let me find that command
[23:30] <Mirodroid> yes
[23:30] <ShinyLinoone> Is the content on that pastebin what you wanted?
[23:30] <samsung> which?
[23:30] <Mirodroid> due to it not being parralel
[23:30] <samsung> i would like more details, especially about typical processes
[23:31] <samsung> systemd versus sysinit
[23:31] <Mirodroid> samsung, if you have systemd now try dointg these https://wiki.archlinux.org/index.php/Improve_boot_performance
[23:31] <Mirodroid> those first before changing init's
[23:32] <th34lch3m1st> hi, about latest flash vulnerabilities, should I remove it waiting for fixes or disabled in the browser it's enough?
[23:32] <cfhowlett> th34lch3m1st, your choice.
[23:34] <th34lch3m1st> ok
[23:35] <daftykins> nuke it from orbit imo
[23:35] <Mirodroid> another flash vulnerability?
[23:35] <Mirodroid> fudge
[23:35] <ShinyLinoone> daftykins, what's the word on the pastebin?
[23:35] <cfhowlett> th34lch3m1st, fwiw, I switched mine to "ask to activate"
[23:35] <cfhowlett> YMMV
[23:36] <daftykins> ShinyLinoone: the word is it was a question i did not ask of you :)
 ok so show us your mount command and the output in a pastebin.
[23:36] <dm_comp> Hi, so I' reading the KVM installation help (https://help.ubuntu.com/community/KVM/Installation) and I'm at the part Add Users to Groups. It states "Karmic (9.10) and later (but not 14.04 LTS)". Now my question is do I have to add myself to libvirtd on 15.04
[23:37] <dm_comp> I would say no
[23:37] <samsung> why does userspace take much longer than the kernel to load
[23:37] <daftykins> ShinyLinoone: then you shared something i didn't ask for.
[23:38] <daftykins> which means i'm no longer helping :)
[23:38] <ShinyLinoone> daftykins, you mean this is not what you asked for?  http://pastebin.com/qSnzLU2C
[23:38] <daftykins> correct
[23:38] <ShinyLinoone> Then how do I get what you asked for?
[23:38] <daftykins> i gave up, sorry.
[23:38] <Mirodroid> samsung, likely due to X
[23:39] <ShinyLinoone> I thought this channel was supposed to be noob-friendly :(
[23:39] <daftykins> it's my bedtime
[23:39] <ShinyLinoone> Alright, then, can I get someone else's help?
[23:40] <daftykins> you were already being assisted by someone else if you read up.
[23:40] <ShinyLinoone> cfhowlett told me what to do to get what you had asked for.
[23:41] <daftykins> doesn't mean i wanted it
[23:41] <dm_comp> the answer to my question is no :) doc needs to be updated ;)
[23:41] <ShinyLinoone> Well you asked for it
[23:41] <ShinyLinoone> So
[23:41] <ShinyLinoone> I don't know what to say
[23:42] <cfhowlett> ShinyLinoone, suggestion: write out your case.  load it in a paste.  ask for help, give a brief description and point to the pastie
[23:42] <cfhowlett> be detailed, be brief
[23:42] <ShinyLinoone> Alright.
[23:43] <th34lch3m1st> cfhowlett  just to be sure...thanks for infos
[23:43] <cfhowlett> th34lch3m1st, happy2help!  remember "flash is dying!" but not dead.  yet.
[23:44] <ShinyLinoone> cfhowlett, here is my case.  http://pastebin.com/P5arkX2V
[23:44] <cfhowlett> ShinyLinoone, no can see it.  I'm in China and the Great Firewall says "nope" to pastebin
[23:45] <ShinyLinoone> It's short enough where I can paste the contents straight into the chat.
[23:45] <ShinyLinoone> Though it's essentially what I said when I first joined, just with better wording.
[23:45] <ShinyLinoone> "I am trying to run a Sonic 3D Blast disc for Windows 95 on 14.04 and it won't mount.  Whenever I try to do anything to it I get the same error message:  "Unable to access “621 MB Volume” -  Not authorized to perform operation".  The disc contains a program that WineHQ says can be run on Ubuntu via Wine."
[23:46] <cfhowlett> perfect
[23:46] <ShinyLinoone> Alright.
[23:46] <ShinyLinoone> So do you have any suggestions as to what I can do?
[23:47] <cfhowlett> be patient and hopefully someone will have the exact answer.  to avoid confusion, you might start with "can't mount a win 95 disc" as the critical issue.
[23:47] <ShinyLinoone> Alright.
[23:47] <ShinyLinoone> And people won't think I'm talking about a Windows 95 system disc?
[23:47] <ShinyLinoone> Because that was the problem I had when I first asked for help.
[23:48] <cfhowlett> the confusion when we/I questioned your use of wine for this task.  the problem was that your windows 95 disc wouldn't mount so yes, specify windows 95 OS dis
[23:48] <cfhowlett> disc
[23:49] <ShinyLinoone> But it's not an OS disc
[23:49] <ShinyLinoone> And people thought it was
[23:49] <ShinyLinoone> It's a copy of Sonic 3D Blast
[23:49] <cfhowlett> !!!! what?!!
[23:49] <ShinyLinoone> I said it like a million times
[23:49]  * cfhowlett quickly looks for more coffee
[23:50] <cfhowlett> ShinyLinoone, could be I'm just slow this morning.
[23:50] <ShinyLinoone> XD
[23:50] <ShinyLinoone> It's fine, it happens to the best of us
[23:50] <cfhowlett> ShinyLinoone, by the way, do you have the wine link for this specific program??
[23:50] <ShinyLinoone> Yes
[23:50] <ShinyLinoone> https://appdb.winehq.org/objectManager.php?sClass=version&iId=12273&iTestingId=25898
[23:51] <jni> i
[23:51] <jni> phj'ph'p
[23:51] <jni> hi
[23:51] <jni>  mate
[23:51] <cfhowlett> jni, stop it