[00:00] test [00:00] exodus: I didnt use nmap that much but you could try #r_netsec [00:00] host? SERVEUR ? [00:00] TJ-: Still here? [00:00] LaserAllan: try "sudo /usr/sbin/start_pms" pastebin any message it outputs [00:01] Previously i had moved the plexmediaserver in case it was all broken to be able to make a fdesh isntall but by omving it back into /var/lib i have gotten plex to at elast show up in htop again [00:01] exodus: freenode [00:01] exodus: you can use /join #r_netsec [00:01] FRENCH [00:02] http://pastebin.com/18QnCFCH TJ- [00:02] LaserAllan: hang on. You say you MOVED files out of place? That would explain it not being able to start! [00:02] exodus: :/ [00:02] It shows up in htop but I still get the same result when i try to access it through "localip" and port [00:02] I moved them to be ablke to make a fresh install but aparently that really didn't work [00:02] exodus: je parlais pas francais mec [00:03] LaserAllan: so what is the situ now - you can see a PMS process active? [00:04] TJ-: Quite allot of them, fi you want i can pastebin what processes plex is urnning? [00:04] LaserAllan: yes, please do [00:04] TJ-: nvm htop doesnt seem to let me mark and copy [00:05] LaserAllan: "ps -efly | grep -i plex" [00:05] Ubuntu, where are you? [00:05] I mean, hi. [00:06] TJ-: http://pastebin.com/Ku9yAKd8 [00:06] thanks TJ === christine is now known as Guest5418 [00:09] TJ-: I dunno but to me it seems like it's running, i jsut cannot seem to access it thorugh the browser [00:09] I just installed Xubuntu with my old home partition being reused. I want to use the default settings on my computer, instead of what they were before I reinstalled. Is there a config file I can just delete, so that the default settings are in place? [00:11] Andystar, In home is one .config a hidden with files, depends really on what apps..etc in the end. [00:11] TJ-: Lemme know if you think theres a way to solve this wihtout ahving to reinstall the whole system [00:13] Andystar, You might define default settings. [00:13] LaserAllan: OK, what does "sudo netstat -tnlp | grep -i plex" report? [00:13] When using Synaptic Package manager I select package "foo" for installation then it shows that this package requires 10 additional dependency packages I agree and it is installed. When I select package "foo" for removal then only this package is removed. Why? How to remove also packages that were installed with package "foo"? [00:14] wileee, Where do I look to define those default settings? [00:15] Doruto, right click the original and choose full removal, but there may be some not removed fully, you can do a purge and autoremove in the terminal. [00:16] wileee: is full removal selecting only packages that were needed with "foo" or is it removing all dependencies? [00:16] Andystar, Err, we want your definition, you've attached it some issue, not sure I can follow you. [00:17] I want to use the artwork available in Xubuntu 15.10 as my wallpaper, and the start menu from Xubuntu 15.10 as my start menu. [00:17] Doruto, Your looking for a definitive answer that has outliers basically I think. Not sure I can do that is all. [00:17] tj TJ-ill make a pastebin [00:18] TJ-: http://pastebin.com/9N0tKANt [00:18] wileee: marked this package for full removal but still it was only this package removed, nothing more [00:18] Doruto: because those other packages may be wanted by the user [00:19] wileee, I want to use the default settings as I saw them on the "LiveCD," which was actually ran as a Live USB. [00:19] LaserAllan: OK, is it is listening on port 32400 for HTTP connections, presumably. [00:19] TJ-: how? if they were installed with this package, so they are as new to the system as new application [00:19] Andystar, Than tell the channel whyt does not work and you want individually, there is no big red generic fix button. ;) [00:19] How do I get JDK? Is it in apt-get? [00:20] I can't find anything but JRE in the software center. [00:20] wilee, *err, was ... run [00:20] TJ-: Why doesn'tit let me login when i enter localip:32400/web then? [00:20] !java | VergilPrime general place? [00:20] VergilPrime general place?: To just use java you need a "Java Runtime Environment" (JRE) and/or a browser plugin. If that is not sufficient you will need a "Java Development Kit" (JDK) aka "Software Development Kit" (SDK). Please see https://help.ubuntu.com/community/Java about how to install one of three current implementations. [00:20] Doruto: consider this: A depends on B,C,D. apt-get install A installs A,B,C,D. User executes program B.1. Later, user removes package A. Should the package manager remove B also without the user specifically confirming that? [00:21] Neat thanks :D [00:21] LaserAllan: when you say 'login' do you mean you see an HTTP reply from the server, in the browser? [00:21] TJ-: ERR_EMPTY_RESPONSE [00:21] Doruto: that's why we have 'apt-get autoremove' [00:21] I guess thats a no [00:22] No data received [00:22] TJ-: I want from Synaptic to offer me this possibility because now I cannot find it [00:22] LaserAllan: That sounds like a Yes actually; else the browser should report no server found. [00:22] TJ-: Oh ok, im using chrome anmd for some reason the language isnt english which does confuse me abit but ok [00:23] TJ-: I am practically out of my league now since after reinstalling plex ahsnt made any changes, so let me know if theres aynthing you think i can do with this [00:26] TJ-: Sounds like were out of options?:P [00:26] LaserAllan: try a manual connection; on the server itself do "curl --head http://localhost:32400/web" and pastebin the result [00:26] TJ-: 'apt-get autoremove' is missing 1 package from what was installed with application, so it is almost the solution, but is it possible to associate auto-remove with particular package or it is just looking for all unneeded packages? [00:27] Doruto: if autoremove doesn't list the package then something else depends on it. Try "apt-cache rdepends " [00:28] Doruto, autoremove removes all packages that you did not manually install, and have no packages that you did manually install that require them [00:28] TJ-: Im not sure if i di this right but locahost is supposed to be the servers own ip or can i jsut do with locashost? [00:28] LaserAllan: type it literally as I gave it, on the system that has Plex installed on it [00:28] oh ok [00:28] LaserAllan, localhost is 127.0.0.1, the universal IP address for "me" [00:29] TJ-: http://pastebin.com/YJaK7Zsa [00:29] psusi: Oh right thats right, im sorry I should know these things but i ahvent used linux for more than 6 months [00:29] 5 months even [00:30] TJ-, psusi : it seems that on this one unselected to remove package depends few things, but how is it possible if just few minutes ago it wasn't even installed? [00:30] LaserAllan, it's the same on any OS ;) [00:30] LaserAllan: looks good; the Plex server replied [00:30] LaserAllan: now try "curl --head http://localhost:32400/web/index.html" [00:31] Doruto, well, that lists all things that depend on it, whether you have them installed or not [00:31] wileee, Thank you for your help. [00:31] Doruto, apt-cache policy xxx will tell you if you have that package installed [00:31] TJ-: http://pastebin.com/rf3GWSxK [00:32] wileee, I just tried deleting the .config/xfce4 folder. That seemed to help. [00:32] Doruto, you can also just try to remove that specific package and it will tell you that will also require removing whatever packages you do have installed that depend on it [00:32] wileee, I logged out, and logged back in, and the new settings were in place. [00:32] Andystar, Cool, [00:32] LaserAllan: looks good, perfect 200 response. So from a browser you should be able to get a good response using http://localhost:32400/web/index.html" - if using a different PC replace 'localhost' with the IP of the server itself [00:32] wileee, Is it safe to do that with all of my config files? [00:34] TJ-: no data received, ERR_EMPTY RESPONSE [00:34] I tried it with my laptop and phone and they al give me the same result [00:35] Andystar, On the whole OS no, the ones there were built as you use the OS in general and add apps, however not all aaded stuffs uses that folder. [00:35] LaserAllan: Well, you need to talk to the Plex people about that; It's working fine on Ubuntu as a service [00:35] added stuff* [00:36] TJ-: Ok, then I at elast know that its not my installation fo ubuntu but i did try to sintall plex on my laåptop [00:36] psusi: nothing more to remove after manually trying to remove it [00:36] and it worked on the laptop which runs lunixmint something is really worng [00:36] but thanks for very professional help [00:37] LaserAllan: find out if PMS writes its own log file; any issues should be there [00:37] Andystar, Good stuff to know though at times it may be the config rather then a gui for stuff if you want or need to change. [00:37] psusi: In my opinion in this case managing packages could be more handy, but I am unable to add new source to apt-get :P maybe someday [00:37] TJ-: Ill gfive you a apstebin [00:38] LaserAllan: possibly the empty response is because you've not get accessed its admin/config pages [00:38] TJ-: Its jsut hwo can that just happen like that? [00:38] It has worked flawlessly for months [00:38] TJ-, psusi : thank you for help [00:38] LaserAllan: have you accessed http://localhost:32400/manage/index.html yet (replace localhost as appropriate) [00:39] wileee: thank you for help === popcorn is now known as Guest3414 [00:40] TJ-: Empty repsonse here as well [00:41] I suppose you want me to paste the media server log for PMS? [00:41] there are scanner log and plugin logs as well but i suppose theya re irrelevant [00:41] Doruto, Not much, but I saw who did and knew you were good. [00:42] wileee, I guess you are saying that the ~/.config/ directories are added as the Operating System gets used. I guess you are also saying that there are other folders should never be touched without care. === HarryCross is now known as Guest49876 [00:43] Andystar, That is it, the computer is full of configs of everything to some extent, in ubuntu however you get nice gui's for many. [00:44] TJ-: http://pastebin.com/p99sN0kF this is the latest PMS log [00:46] LaserAllan: line 127 "The plug-in /var/lib/plexmediaserver/Library/Application Support/Plex Media Server/Plug-ins/SiteConfigurations.bundle is not runnable." looks suspect. Time to ask the Plex support folks [00:46] SO i should take this to the forums?=) [00:47] LaserAllan: yes, with that log-file [00:48] TJ-: Ive mad ea post, hopefully ill get some answers to waht thsi can be [00:48] It was really nice that you oculd hlep me this far [00:53] TJ-: I got someone to say that the plugin the log reffers to had to be rmeoved for the server to funciton again [00:53] So i guess i can try that [00:54] LaserAllan: right, sounds like you have an expert on Plex now :) [00:55] TJ-: Well I need to learn mroe linux actually [00:55] TJ-: All i can say is thank you for giving me some of your time to hlep me out [00:55] LaserAllan: good luck with it [00:57] TJ-: How do I delete all the directories within a directory? [00:57] what may be the reason that now, when looking for package, it is missing from search results in synaptic and only operations that were performed were installing and removin packages? [00:57] hmm how do i cd into a directory that ahs spaces in them? [00:58] sorry, I was looking for wrong term, it is working now [00:58] enclose the directory in quotation marks [00:58] LaserAllan: Example: cd "/home/username/Folder With Spaces" [00:58] cd /var/lib/plexmediaserver/Library/"Application Support"/Plex Media Server/Plug-ins [00:58] ? [00:58] nvm theres another one i ened to do it with as well [00:59] cd /var/lib/plexmediaserver/Library/"Application Support"/"Plex Media Server"/Plug-ins [00:59] So now i ahve three folder sin here that i wish to remove comepltely [01:00] What command should i use? [01:00] LaserAllan: you can use tab key [01:01] gad-l: Rm and then tab? [01:03] LaserAllan: y [01:03] Didn't work [01:03] it says it is a directory [01:03] nto sure hwo to remove it [01:03] LaserAllan: no [01:04] Thats what the console tells me:P [01:05] Would it be possible to edit ther adduser perl script to include creation of virtual host, mysql user and db etc? [01:05] LaserAllan: cd "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server/Plug-ins" === z_ is now known as Guest97076 [01:06] Thanks [01:06] FIxed it [01:06] So now lets hoep ti works [01:06] Ok just removed the plugins and did a restart [01:07] Oh wrong channel:P [01:08] hinderaker: see "man 8 adduser" and "If the file /usr/local/sbin/adduser.local exists, it will be executed after the user account has been set up in order to do any local setup" [01:09] Awesome TJ-. Thanks. I will definitly check that out even though you already answered my question. Now I just need to find a good perl programmer :P [01:10] hinderaker: doesn't have to be Perl, could be a Python or shell script [01:11] im fairly new to ubuntu, and i am in desperate need of help connecting my home computer to my server computers gui , i am able to connect ssh terminal but i cant seem to connect to the vnc way to the graphical user interface [01:11] TJ-: Genious! Thanks again. I just assumed, dumb assumption really, since the adduser script itself is perl. [01:12] am i in the right place for help on this issue? [01:13] hinderaker: as long as the file has a #! shebang line as line 1, the correct interpreter will execute it [01:13] TJ-: While I have your expertise here. What would you recommend? I would need some interactive stuff like checking if mysql db already exist, if the domain is already used in another virtual host etc. Perl? Python? [01:15] anyone? [01:17] hinderaker: I'd use shell scripts; fits in well with how the rest of the system manages those kind of jobs [01:18] im fairly new to ubuntu, and i am in desperate need of help connecting my home computer to my server computers gui , i am able to connect ssh terminal but i cant seem to connect to the vnc way to the graphical user interface [01:18] TJ-: Awesome. You've been of great help. I did some googling, and its not easy to find "definite" and accurate answers when you are not sure what you are looking for yourself. Thank you again, you saved me hours! [01:20] hey [01:20] hey guys [01:20] i have a question [01:21] is there anybody in here? [01:21] !ask [01:21] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [01:21] ok i am trying to install ubuntu [01:22] i handled all of settings of it. [01:22] when i finished settings and attempt to restarted it,i got an black screen [01:22] :/ [01:23] !nomodeset | linuxlearner try this [01:23] linuxlearner try this: A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter [01:23] i ve got a lot of failed error messages..like squash.. [01:24] thanks ubottu..i will take a look at it === CrypticS_ is now known as CrypticSquared [01:26] and one more question,i have a problem with my mainboard..my computer works but i still have a problem with it.maybe that's why i m getting a black screen? [01:26] TJ-: One more thing... (sorry for the Apple quote) Will the same work for deluser? [01:26] i am using dell [01:27] hinderaker: not sure; does the man-page for it indicate a similar facility? [01:27] hinderaker: "If the file /usr/local/sbin/deluser.local exists, it will be executed after the user account has been removed ..." [01:28] TJ-: Sorry about that. Offcourse I could have checked that one myself. Thanks, alot! [01:29] Anyone here know how to generate flamegraphs of their Ubuntu desktop? http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html [01:31] i knew that it was gonna be hard to install linux but i am not giving up.. [01:31] i think it's giving an error message because mainboard is broken === cmoneylu_ is now known as cmoney [01:35] linuxlearner: there's a third-part package available at launchpad [01:36] JessicaJung_: He/she already quit. [01:37] hinderaker: thanks for the info [01:37] JessicaJung_: c",) [01:40] baizon fixed it [01:41] Is there a way I can upgrade an old PC running Ubuntu 6.08 to 15.10 [01:41] ? [01:42] re-install [01:42] johnny_linux, reinstall is not an option [01:42] OERIAS: There was never a 6.08 release of Ubuntu. Why is re-installing "not an option"? [01:42] OERIAS: do sudo do release-upgrade [01:42] i meant install from scratch [01:43] to much data and i fear that I will lose the integrity [01:43] Jordan_U, I meant 6.06 [01:43] put it on a stick [01:43] OERIAS: What do you mean by "lost the integrity"? If you have important data it needs to be backed up, especially on an old machine where hardware is more likely to die. [01:43] OERIAS, burn an ISO into a stick, open it there, run ubiquity, then select upgrade if option exists [01:43] johnny_linux, Like I have said before it is not an option. [01:44] it is an option, a great one [01:44] like Jordan_U said, the hw may not be capable [01:44] upgrading gives you a lot of issues, so no option either [01:44] johnny_linux: That's not what I said at all. [01:44] But want a upgrade path to 15.10 [01:44] why isn't it an option [01:45] OERIAS: burn it into a stick [01:45] OERIAS: Do you have all of the important data on this computer's hard drive backed up elsewhere? [01:45] lol, OERIAS , by the time you got to 8.04 itd be toast [01:46] <[n0mad]> 6.06? wow [01:46] i almost think were being had here [01:46] OERIAS: just download trusty and wait for the wily point release [01:47] which is point 5 release [01:48] OERIAS asked the same question January 25th, got the same answer (install fresh), and ended it with swearing at everyone [01:49] Ben64: oh, thanks for that [01:49] Ben64: that escalated quickly, I guess [01:50] some people come here for the answer they want, not an actual answer [01:50] not an option [01:51] oh btw, how do you access your Win10 NTFS partition [01:51] <[n0mad]> released on 1 June 2006 and worried about the data smh [01:51] Ubuntu just reports cannot resize [01:51] and OERIAS asked the same question October 26th, 2014 and got the same answer then too [01:51] JessicaJung_: you'd need to make sure its actually shut down, and not hibernating, or fast boot, or whatever they call it [01:51] <[n0mad]> JessicaJung_: have you disabled fastboot in windows? [01:52] Ben64: that's the problem, it's shut down normally [01:52] can you mount it? [01:52] hey guys, is this the #amillionwaysofaskinghowtoinstallubuntu channel? [01:52] n0mad: so far there is no option in Win10 [01:52] JessicaJung_: The default "Shutdown" option doesn't actually shut down in Windows 10. [01:52] n0mad: I'm running an Insider build, that's why I guess [01:52] Wwwwweeeeeellllllppp [01:53] I just my computer almost virtually completely bricked. [01:53] Jordan_U: walk me up to it please [01:53] I just got my computer to * [01:53] JessicaJung_: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html [01:53] I swear, I'm getting 14.04 with a rc kernel ;3 [01:54] I can't get any of my boots anymore. Usually I'd take off the battery, wait a few sec and try again. Nope. Gone. And my usb only has memtest for now. [01:54] So I can't load up a boot recovery. 😆 [01:54] Bomber4Chats: did you try re-installing it [01:54] I can't until tomorrow, dude [01:54] Bomber4Chats: or re-installing the grub4 package (or whatever grub package you use) [01:54] I have no other computer around me right now [01:55] Bomber4Chats: and I'm a girl :3 [01:55] I only got my phone, which I'm communicaitng to you through it, my memtest usb and a boot-dead computer [01:55] Gotcha', dudette [01:56] Bomber4Chats: Can you successfully run memtest? How was your USB drive prepared for booting? [01:56] Bomber4Chats: what exactly do you see when the PC fails to boot? [01:56] Yes, memtest is a OK [01:56] It loads up the bios [01:56] All boot are gone, pretty normal [01:56] Bomber4Chats: is it a kernel crash [01:56] Bomber4Chats: For example, if you choose the Advanced > Recovery option, what do you see last [01:56] I can't reach grub [01:56] It goes straight to bios [01:56] TJ: I don't think he can access GRUB [01:57] Bomber4Chats: So possibly the drive has failed, or cabling dislodged [01:57] I don't know how to r economy a kernel crash [01:57] Bomber4Chats: does the BIOS report detecting the hard drive? [01:57] Bomber4Chats: can you access the GRUB recovery options? [01:57] I can attest, and I think TJ might remember me mentioning external screen connection /disconnection errors [01:58] Well while I was running the shutdown sequence, I disconnecting the screen and closed the lid of my comp [01:58] After that, when I came back home, this issue started. [01:58] I can't access grub [01:58] TJ: what was the issue back then? [01:58] JessicaJung_: I don't recall it [01:58] Bomber4Chats: then sir, grab a USb then flash an ISO [01:58] Sorry TJ- [01:58] Wish I could, gonna have to wait till tomorrow [01:59] But i have to say [01:59] Bomber4Chats: that's a dead PC you're holding [01:59] Bomber4Chats: How was your USB drive prepared for booting? Does it use syslinux or grub? [01:59] Bomber4Chats: So, you power on from cold... see the BIOS Power-On Self-Test reporting. Does that report the hard drive is detected? If you enter BIOS Setup, does THAT report the hard disk? [01:59] I hoe you'll agree with me that having to occasionally run a boot recovery is a faulty system to run. [01:59] Bomber4Chats: it does report it can detect a HDD rite? [02:00] JessicaJung_, I'm not sure what reportage I can provide you. I'm stuck on the bios screen only. [02:00] Bomber4Chats: no error saying : HDD boot failed ? [02:00] TJ-, could you please guide me? I can't find the power on self thingy [02:01] Bomber4Chats: The POST is the power on self test the PC does every time it starts. It's those messages from BIOS before it (tries) to load the boot loader [02:01] Not sure where Jessica, I don't think the bios reports errors [02:01] TJ: for now, i think he's missing the grub4 package === sireebob is now known as sireebobducca [02:01] Bomber4Chats: how did grub4 get deleted anyways? [02:01] Bomber4Chats: There will be a hot-key you can press to get into BIOS Setup. Press it at boot-time, get into BIOS Setup, see if the drive is detected/reported there [02:01] I don't think it got deleted [02:02] Bomber4Chats: it supposed to boot up, without GRUB, your PC is cold as ice\ [02:02] I think plasmashell or kubuntu or something else are messing with my /devs in a way that causes memory access issues [02:02] That's my bet [02:02] * TJ- rolls eyes [02:02] TJ, it boots bios automatically [02:02] Bomber4Chats: and I bet the magic pixies are inside it too [02:02] Bomber4Chats: I always remember what my pigeon said to me: create another partition and put a secondary OS in it [02:03] If your talking about the boot options, there are none.. [02:03] Bomber4Chats: Good, so does the BIOS Setup list the hard drive as detected and tell you details about the drive? [02:03] I can't see drivers, if that's what your are asking for. [02:03] Ohh [02:03] Wait, found it [02:03] Bomber4Chats: nothing to do with drivers; The BIOS summary screen will show the drives detected. [02:03] Sata mode selection [02:03] There's only serial ATA port 0 [02:04] And serial ATA port 1 [02:04] And the rest is empty in between [02:04] Bomber4Chats: what make/model of PC is this? [02:04] Port 1 is the cd rom [02:04] Bomber4Chats: I'm pretty sure your HDD is on SATA0 [02:04] Hi === forbidden is now known as Guest95303 === Who is now known as Guest973 [02:04] how are you guys [02:04] Hnmmmmmm [02:04] I'm gonna try something tricky.... [02:05] Bomber4Chats: if this PC was having boot / disk issues previously it is likely the disk was dying, and has now finally been buried [02:05] Bomber4Chats: the other option is, there's a loose cable/connection and unplugging/replugging the hard disk will fix it [02:05] TJ: if ur PC suffers a HDD bad block, you are doomed [02:05] HHH [02:05] JessicaJung_: No I'm not [02:06] I'll bet you that running my computer connected to my external screen in the office will fix it. 😊 [02:06] TJ: oh sorry, wrong send [02:06] Bomber4Chats: changing displays won't fix your hard drive [02:06] Bomber4Chats: what happened before your HDD died [02:06] Thanks Ben! I'm out of this one! [02:06] no! [02:07] Ben64: yay! I'm going to bed! [02:07] i have to go to my makerspace now... [02:07] I'm not sure my hdd is dying. It's a possibility [02:07] nah, I'm staying [02:07] I think Bomber4Chats hard disk has already gone to its maker [02:07] We can all assume [02:07] Bomber4Chats: is it a HDD bad block error? [02:07] I mean, think about it TJ [02:08] How am I able to reach the bios [02:08] Bomber4Chats: you sir, had to go to zeus and zp it with 2 GHz to revive your drive :3 [02:08] I'd if I got an f'ed up hdd? [02:09] Bomber4Chats: Your BIOS is not stored on your hard drive, and bios screens (and boot firmware screens) will work fine without any hard drives connected. [02:09] Hmm [02:09] Bomber4Chats: Unless you have another drive as spare, you're heading to the laptop Hosptal [02:09] ubuntu is the shittiest operating system ever!!! im more anonymous with windows 10 [02:09] bobby67: please make this matters at #ubuntu-offtopic [02:10] It's not that bad, but it's hard to work with it [02:10] Jordan_U: you sir won a free internet pass [02:10] Especially when the devs are having a hard time dealing with different specs of different machines meant for Windows [02:10] Hordan_U: if there is such things [02:10] I have been using spec file in case of building the RPMs under RHEL based distros. What is the similar approach in case of debian or ubuntu distros [02:11] !packaging | decci [02:11] decci: The packaging guide is at http://packaging.ubuntu.com/html/ - See https://wiki.ubuntu.com/UbuntuDevelopment/NewPackages for information on getting a package integrated into Ubuntu - Other developer resources are at https://wiki.ubuntu.com/UbuntuDevelopment - See also !backports and !sponsoring [02:12] So, once I get my system back up, I'll run the hdd test [02:12] decci: What are you trying to package? [02:12] decci: debian/control debian/rules debian/changelog and supporting files [02:12] If anyone has any special cool command, I'd be happy to hear. [02:12] TJ-: What about checkinstall https://help.ubuntu.com/community/CheckInstall [02:13] TJ-: I think its pretty similar to rpmbuild [02:14] decci: it will work for simple cases usually [02:14] Bomber4Chats: IF bios does not see that hard drive, there is no magic bullet . Period . [02:14] TJ-: I have tarball out of which I want to build .deb packages [02:14] Hello. I am currently running Ubuntu 12.04.5 LTS on a server and am trying to run ./configure for ZNC. I get the notice "configure: No compiler with C++11 support was found [02:14] configure: error: Upgrade your compiler. GCC 4.7+ and Clang 3.2+ are known to work." The default GCC compiler on this machine is less than 4.7, but I do have 5.2 installed locally in usr/local/bin/gcc-5.2. After some googling, I found out that in order to compile it correctly (by using GCC 5.2), I'd need to run a command such as ./configure CC="your compiler" or export CC="your compiler" CFLAGS="-O3 -Wall", but none of the options I am finding work. Does [02:14] anyone have any suggestions? Thanks! [02:14] TJ-: Usually how I do is create spec file, run rpmbuild -bb .spec file and that gets me RPM packages [02:15] decci: What are you trying to package? [02:15] Jordan_U: I have source code which I want to package to .deb [02:15] decci: Did you write this source code yourself? [02:16] Jordan_U: No..development team did that ..they need some help in packaging it similar to rpmbuild which they have been doing for quite soemtime [02:17] Jordan_U: Came across checkinstall, though it worked fine..but still want to know standard procedure [02:17] MJ94: CC over-ride will only work if the Makefile plays nicely and uses it. it is possible the configure script, or the Makefile, don't support an over-ride [02:17] unity [02:17] is [02:17] terrible [02:17] HA HA! SUCK IT COMPUTER! I OWNZ U! [02:17] TJ-: That I am not sure of. [02:17] decci: If you're working for a company that's going to be distributing .deb files to its customers then you should follow the packaging guide that ubottu linked to. checkinstall .debs are not adequate for distribution. [02:17] MJ94: but, are you using "export CC=/usr/local/bin/gcc-5.2" for example? [02:17] TERRIBLE [02:17] WHO'S DEAD NOW B@+R'$! [02:17] TJ-: yep! [02:18] nug700: This channel is for productive Ubuntu related support discussion only. Take other discussion elsewhere. [02:18] Alright, back to. Or mal people. Plz let me know any recommended commands to test hdd [02:18] seriously running "sudo unity" does PERMINANT damage to your desktop config if you use something like xfce [02:18] Normal * [02:18] Jordan_U: they have got build server ready..but stuck at packaging [02:19] nug700: You should never run programs as root that were not designed to be run as root. There are many applications that will cause serious problems (the most common being inability to log in via X) if you run them as root. Don't do that. [02:20] decci: OK. Are you reading the packaging guide that ubottu linked to? [02:20] Bomber4Chats: https://help.ubuntu.com/community/Smartmontools ; https://en.wikipedia.org/wiki/S.M.A.R.T. . [02:20] Jordan_U: Going through it [02:20] Bashing-om, thx [02:20] MJ94: which ZNC version are you trying to build? [02:21] TJ-: 1.6.2 [02:21] oops [02:21] TJ-: 1.6.1 [02:21] Should I upgrade after checking my hdd? [02:23] MJ94: What does the config.log show when the compiler is being detected? [02:24] Jordan_U: Do I need to register with Ubuntu Launchpad? [02:24] TJ-: I have config.log open; what exactly would you like to see? [02:25] Jordan_U: Is it compulsorily? The source code mightnt be thing to share. === TwistByrn is now known as twistbyrn [02:25] I did something stupid on my local virtual machine. I moved ubuntu.desktop, is there anyway to get a command prompt using virt-manager? === twistbyrn is now known as TwistByrn [02:25] MJ94: if the CC is configurable you should find some references to it, as well as detection of the C++11 supporting libraries [02:26] nm... found it [02:26] decci: No. That guide is geared toward people developing packages which will be included in Ubuntu. You'll have to look at just the portions about how to actually create the proper source package and build it. [02:27] Jordan_U: You mean the guide wont cater in my case. Pls suggest links which I can go through. [02:28] decci: the 'cdbs' (Common Debian Build System) provides lots of common targets for building a package, such that the debian/rules file can be extremly minimal in most cases - simple requiring the correct includes from cdbs makefiles itself [02:28] TJ-: Let me check that [02:29] decci: something I wrote 7 years ago but it might help get an idea: http://tjworld.net/wiki/Linux/Ubuntu/Packages/CDBSCustomRules [02:29] TJ-: Thanks [02:30] Jordan_U: I am just doing reading and got to this step http://packaging.ubuntu.com/html/packaging-new-software.html [02:30] Jordan_U: It uses bzr tool to get the .deb format [02:31] decci: Everything on http://packaging.ubuntu.com/html/packaging-new-software.html up to bzr push lp:~/+junk/hello-package applies to your case. And by that step, you already have a completed .deb package. [02:31] Jordan_U: bzr builddeb -- -us -uc [02:32] Jordan_U: I think this is the step where they might be stuck though I can check with them [02:33] Jordan_U: I think the tool checkinstall(yes, its not recommended) does this automatically [02:34] Jordan_U: I dont see anything mentioned on .spec file. What is the similar file in ubuntu? [02:34] decci: I have no idea what a .spec file is, so I can't tell you. [02:35] My control key has become a capslock key, and I'm not sure how to reset it. Any suggestions? [02:35] decci: http://packaging.ubuntu.com/html/debian-dir-overview.html [02:36] Jordan_U: Its called control file in case of Ubuntu I guess..yeah pretty like that [02:36] Jordan_U: http://packaging.ubuntu.com/html/debian-dir-overview.html#the-control-file [02:37] Jordan_U: The control file contains the information that the package manager (such as apt-get, synaptic, and adept) uses, build-time dependencies, maintainer information, and much more. [02:37] Jordan_U: Thats pretty similar to .spec under RPM distros [02:37] TJ-: No luck there, either. :( [02:37] is there a *command* to paste whatever’s currently in the clipboard? [02:37] TJ-: I have the config open but see no way to change it [02:39] nvm, found xclip [02:41] is there anyone here that can help me connect my laptop ubuntu 14 to my server ubuntu 14 thru vnc and gnome gui? === ferret__ is now known as ferret_ [02:43] i have been trying so hard for 3 days..i got it working a couple of days ago but the next day i was back to square one [02:43] ive tried vncveiwer [02:43] tightvnc [02:43] and others [02:44] but i think im just not putting some settings in or im missing something [02:44] I can [02:44] omg thank you! [02:44] I can't use the termianl, and the ctrl-alt-F1 terminal is not accepting my user info [02:44] is it the same as my username? [02:45] nug700, control alt T is what I use. [02:45] Yes I can't use that one [02:45] oh i thought nug was saying he could help me [02:45] nug700, what happens when you do? [02:46] I'm trying to install things but http://hr.archive.ubuntu.com... is not responding [02:46] can I change from where I get things ? [02:46] well on the cont alt F1 you have to put in your user name and then your password [02:46] I wanted to start Unity3D from the terminal, forgetting "unity" was the default software ubuntu usinges for desktop [02:46] Think it selects croatian (hr) repo since they are closest/fastert [02:46] So I typed sudo unity [02:46] while using xfce [02:47] now my desktop is doing a lot of weird things [02:47] Including not being able to focus on most of the windows (which don't have borders anymore) [02:47] nug700: that'll likely be because, after running sudo unity, some files/dirs are now owned by root [02:47] FTR, I fixed the keyboard with 'xmodmap -e "keycode 37 = Control_L NoSymbol Control_L"'. Just a hack, but hopefully I won't ever see that problem again. [02:48] TJ-: how would I fix this? [02:48] nug700: easiest would be to reboot into Recovery mode, and reset ownership of the user home and all sub-dirs/files to the user [02:49] how? === wook is now known as Guest41506 [02:49] (to get into recovery mode) [02:49] Ubuntu source hr.archive.ubuntu is not responding is there an easy way to select an alternative ? [02:49] nug700: Hold down Shift key as the PC boots until you see the GRUB boot manager menu, choose the Advanced sub-menu, and then the first "Recovery" entry. [02:50] ok [02:50] nug700: that should lead to the ncurses text-based 'friendly-recovery' menu, which has several options. You want the root shell. Then, for the user's /home/XXXX do "chown -R XXXX:XXXX /home/XXXX" [02:50] too late! [02:51] nevermind fixed using software sources tab [02:53] holding shift is not working [02:55] Hello, does anyone know any pdf program that allows me to see layers? [02:57] Is there a way to set permanent dpms? [02:57] I tried running script on boot, but id doesn't seems to be working. [02:59] RedBlue: have you looked at gimp? [02:59] BuzzardBuzz: gimp converts the pdf file to edit it as an image [03:00] RedBlue: the PDF can have layers from the import i think [03:01] RedBlue: Also then can export it back to PDF again too [03:02] I'd have to look into that, gimp is a bit complicated. Any other options? [03:02] yea no combination of holding either of the shift keys on startup or shutdown brings up the GRUB menu === nug700|2 is now known as nug700 [03:03] RedBlue, gimp is not complicated, it's just that you cant read instructions. [03:05] nug700: do you hold Shift from the very start of the system boot process? If Shift doesn't work, it could be it needs 'Esc' instead [03:05] last time i checked libreoffice writer can open pdf [03:05] RedBlue: For editing PDFs I've used master-pdf-editor for a long time; it used to be in the ubuntu partner repo I think, as a paid app, then went freemium. [03:06] lI held shift from the moment the system started and held it just after the self check image. [03:06] I've tried master pdf editor and it doesn't have this feature [03:07] RedBlue: Last time I used it I'm pretty sure it did because that was something I needed to do [03:07] * RedBlue is opening master pdf editr [03:08] TJ-: how did you do it? [03:09] holding escape on startup brings up the grub bash terminal [03:09] if it was possible, the option would be near bookmarks, pages... on the left or in the view menu [03:10] RedBlue: I have it installed on 14.04 but I'm on 15.10 right now, and can't fire it up from the chroot [03:10] nug700, if you hold down the freedom key i heard that fixes things === aaron is now known as Guest2854 [03:15] RedBlue: got it running... I think what I am thinking of is the "Send-to-Back" and "Bring-to-Front" commands; I don't see a specific layer manager though [03:16] TJ: ok [03:17] TJ-: I can't get into grub menu [03:17] it just won't whow up [03:17] RedBlue: if you go to File > Document Properties > Initial View > Page Mode you can select Layers Panel [03:17] nug700: That is weird; which Ubuntu release is it? [03:18] 15.04 [03:18] TJ: it's already set to "Layers panel" but I only see one thumbnail on a doc that has 5 layerts [03:19] shuting down holding shift won't open it. pressing shift at all stages of booting won't open it. Pulling the plug while ubuntu and loged on won [03:19] won't even open it [03:19] RedBlue: Hmmm! [03:19] that layers panel is what I see when I click on "pages", right? [03:20] RedBlue: I'm not sure now, it is so long since I last used it, but I think its supposed to be an additional tab in the left pane, alongside Pages, Bookmarks, etc. [03:20] well, that tab doesn't show [03:20] RedBlue: scratch master-pdf-editor then! [03:22] I'll ask them why the layers panel doesn't show. Thanks for making me realize it exists, TJ [03:23] http://sourceforge.net/projects/debreate/ looks cool [03:23] Jordan_U: Got this as easy way http://sourceforge.net/projects/debreate/ [03:27] what's the command to reboot into the grub menu? [03:27] nug700, hein? [03:28] what? [03:28] nug700, depends, you might have to hold shift or tap something before the grub shows.. i forget i'm not currently on my ubuntu haha [03:28] nug700, sec [03:28] yeah i suppose you can try that [03:28] (hold shift) [03:29] or keep tapping it === nudtrobert1 is now known as nudtrobert [03:31] so does anyone rotate their screen in ubuntu and experience the cursor not moving along with the new orientation? [03:31] skweek, hein? [03:31] the reason for choosing to use Shift (or Ctrl) is they can be held down since they are state keys, whereas other keys need to be pressed at exactly the right moment [03:32] skweek: no [03:32] TJ-, maybe [03:32] TJ-, depends on his keyboard [03:32] any key should be able to bring up the menu.. [03:32] but of course avoid the "escape" key dugh [03:32] beepie: fact. The shift/ctrl keys set state flags which can be read with a simple io port read [03:32] wo what if I hold down all? [03:33] so* [03:33] nug700: is it a USB keyboard? [03:33] yes USB [03:33] nug700, you can force the menu to show up with a timeout editing /etc/default/grub [03:33] (then applying the proper update cmds later) [03:34] nug700: aha! in the BIOS setup, is "USB Legacy" support enabled? (that tells the BIOS to continue providing USb input services to the boot loader/OS until they take over the hardware) [03:34] is there a way to trouble shoot this? [03:34] skweek: does the screen orientation change but the mouse directions not? [03:34] you mean 'troubleshoot' [03:34] yes [03:34] there may be an "nvidia" option for this [03:35] TJ-: yes , Beeelow thanks [03:35] i suppose that is what you're using (nvidia) [03:35] skweek: first thing to do is look at /var/log/Xorg.0.log in case there are clues [03:35] skweek: also, can you "pastebinit <( xrandr -q )" [03:37] http://paste.ubuntu.com/12986649/ === Guest78974 is now known as ksx4system [03:39] skweek: that seems to indicate the screen is in landscape mode, not portrait (1920 x 1080) [03:39] I don't really think that there's anything helpful from /var/log/Xorg.0.log when looking at it that indicates anything particularly useful [03:40] skweek: compare that with one of mine: http://paste.ubuntu.com/12986661/ [03:40] http://paste.ubuntu.com/12986663/ [03:40] I ran that with it in left orientation [03:41] skweek: that looks better! [03:41] skweek: so now the cursor orientation hasn't flipped? [03:42] skweek: what input device is the PC using? Touchpad, mouse? [03:43] I can't really tell if the touchpad orientation is normal or not... cocking my head to the left and trying to figure if the mouse is moving in the right direction is beyond my abilities of comprehension, they could be I just can't tell. The touchscreen on the other hand doesn't recognize the orientation change and taping on the screen mouseclicks on an inverse x/y axis [03:43] skweek: if it is a touchpad, then I seem to recall there needs to be a change made to the synclient too [03:44] the touchscreen's my concern since I'd like to sit on the couchchair and read a book like with the keyboard detached [03:44] skweek: try "synclient Orientation=1" [03:44] could not find synaptics properties, no synaptics driver loaded? [03:46] Hmmm, maybe that's part of your issue. Although I ran 'synclient -l' here (Ubuntu 15.10) but don't see "Orientation" as an option, but the touchpad moves correctly on the rotated display === nudtrobert1 is now known as nudtrobert [03:51] ? http://paste.ubuntu.com/12986723/ [03:52] hi. Any one to help me please ? http://pastebin.com/DPHMJQ9H [03:53] niee: have you tried doing what the error message said? [03:53] plytro: ? [03:53] E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). [03:53] the very last line before you get your prompt back [03:54] also line 5 You might want to run 'apt-get -f install' to correct these: [03:55] also line 1... if you are root, you don't need to run sudo [03:55] skweek: not sure why you'd get that; those are the default package versions in Trusty [03:55] niee, sudo in root? [03:56] TJ-: I tried trusty specific-lts and installed it, the touch screen still doesn't recognize a change in x/y axis upon change in orientation [04:01] skweek: not sure why it's (not) happening. I did find this via a forum comment: https://github.com/wolneykien/xrandr-align [04:03] interesting if this utility works [04:04] what do I o once inside recovery mode? [04:05] nug700: that should lead to the ncurses text-based 'friendly-recovery' menu, which has several options. You want the root shell. Then, for the user's /home/XXXX do "chown -R XXXX:XXXX /home/XXXX" [04:06] nug700: replace XXXX with the username/directory-name === spencer is now known as Archibaldy [04:06] so chown -R jon:jon /home/jon? [04:06] nug700: correct [04:07] nug700: after that, you should be able to "exit" to get back to the friendly-recovery menu, and then choose "resume" [04:08] ok I'll try it === Fisheh is now known as MonkehParade === antojose is now known as drup1 [04:15] chown commnand seemed to work. [04:15] but it did not fix my desktop [04:19] nug700: there may have been other changes in the setting written into some config files, or cache files. That kind of thing is hard to pinpoint. Creating a new user account, log-in/out, and comparing the freshly created files in that profile against the user's main profile can sometimes help [04:19] so I'm basically fucked [04:20] I wouldn't know what files to compare [04:21] well a user in xfce irc chat did say to run "start xfwm4" in terminal emulator, but I can't access it. [04:23] nug700: I would make a new user account simply to see if the problem persists. [04:23] nug700: do you have lots of files in your user profile? maybe you could switch over to a fresh user profile and take files with you? The only downside there is saved settings for programs, keyring, and so on [04:24] I'm not sure what the full ramifications would be running unity as root. [04:25] ruining everything? [04:25] EVERYTHING [04:25] how dumb are those developers? [04:26] Idea! create 2 new user profiles, both as sudo group members. Run unity as root in the same way as was done with the main user profile in ONE of them, then compare the two fresh profiles and see what different "sudo unity" caused [04:26] nug700: User mistake, not developers. [04:26] nug700: This was a user error, therefore not a fault with the devs. [04:26] They should have put some kind of warning in there [04:26] Dev's can't stop you shooting yourself in the foot, and it isn't their task anyhow [04:27] It is if they want this to have any kind of market share. [04:27] seriously [04:27] nug700: It's your responsibility to understand what and what not to run with sudo. [04:27] I wasn't even trying to run that [04:27] nug700: but you did, that's the point. [04:27] I was trying to start unity3d [04:28] how do i loop through an object? [04:28] It didn't occure to me the unity program even existed until I was pressing return [04:29] Instead of worrying about the marketshare, make a new user account and get to troubleshooting. :) [04:29] How would I make a new user using the termina? [04:29] the GUI for it is not functioning [04:30] $ man adduser [04:30] afasdf [04:30] hi guys, how do i loop through an object? [04:30] oops [04:31] nug700: "man adduser" in the terminal pulls up the manual page. [04:32] hi anyone know why an ubuntu kickstart would be overwriting the changes I've told a post scrip to make to the interfaces file ? [04:33] it writes everything to interfaces that I need to, but then when it's rebooting the system it changes the file back to what it was during the kickstart [04:41] You know what, I think I'm done with desktop ubuntu It had something going for it back in ubuntu 10, when they weren't trying to make the UI all tablet-ish. Trying to make it a mainstream OS by giving it a "good" look but not fixing all the design usability desing flaws. [04:41] TJ- this is what I ended up doing http://paste.ubuntu.com/12986941/ [04:42] nug700: just install a different desktop. You dont need to use unity [04:42] I did [04:42] nug700: so you're not happy with any desktop that is available? [04:42] I'm not happy the direction ubuntu went in general. [04:44] "<nug700> so I'm basically fucked" [04:44] !ops nug700 trolling [04:44] beepie: I am only a bot, please don't think I'm intelligent :) [04:44] nug700, you hate ubuntu so why are you here? [04:44] So frustrated == trolling I guess [04:44] beepie: if you believe someone is trolling, just /ignore them === _syntroPi_ is now known as syntroPi [04:45] somsip, better for the channel to thwart other trolling trolleys [04:45] quick question? Is it possible to use xorg 1.18 somehow under Ubuntu? [04:45] so somebody is critical of your OS and that makes them trolls. [04:46] beepie: the ops are not going to respond to these sorts of comments as trolling. Just don't encourage and drop it [04:46] more than that you just come on here to swear and complain [04:46] I said 1 swear word in a rather extreme situation. [04:47] ^ lies [04:47] "<nug700> how dumb are those developers?" [04:47] that's two [04:47] dubm is a swear word? [04:47] dumb* [04:48] that's a direct attack on Ubuntu like 3 times [04:48] * beepie ignores nug700 [04:48] attack has quit a lose definition doesn't it [04:49] there are also some developers on here btw, so i mean that's still rude.. i still think it was still a valid call to ask to do something about such trolling usres. [04:49] !ops | beepie & nug700 (handbags at dawn is getting tedious) [04:49] beepie & nug700 (handbags at dawn is getting tedious): Help! Channel emergency! (ONLY use this trigger in emergencies) - Pici, Myrtti, jrib, Amaranth, tonyyarusso, Nalioth, lamont, CarlK, elky, mneptok, PriceChild, Tm_T, jpds, ikonia, Flannel, genii, wgrant, stdin, h00k, IdleOne, nhandler, Jordan_U, popey, Corey, ocean, cprofitt, djones, Madpilot, gnomefreak, lhavelund, k1l, rww, phunyguy, bazhang [04:51] * phunyguy looks up [04:51] guys, can we not? [04:51] I've been done. [04:51] I don't care. Please stick to Ubuntu support. [04:52] * beepie ignores somsip [04:53] hi [04:53] hi [04:54] will the new user I create have the graphics drivers I installed from this (the ruined) one? [04:55] as long as they are in the video group [04:55] ah ok [05:00] Hi! === sysdoc_ is now known as sysdoc [05:04] I added a PPA using apt-add-repository, and ran 'apt-get update', but 'apt-get install' is not using the PPA. It's still using the universe repo. How can I make it use the PPA? [05:06] I think you still need to edit the /etc/apt/sources.list pcglue [05:07] shortstraw8: I actually did that too. still didn't work. [05:07] And stuff in sources.list.d [05:08] What should I do to reload /etc/hosts after updating? [05:08] did you do apt-get update after too? [05:09] yes [05:09] it complained about duplicate ppa because it was in sources.list.d from the apt-add repo and from my edit of /etc/apt/sources.list [05:10] pcglue: what PPA is it? Chances are the package in the ppa is older? [05:10] hy [05:10] NathanielHill: should be an instant change. [05:10] Was thinking that the ppa might be the issue too [05:10] It's ppa:mosquitto-dev/mosquitto-ppa. 0.15-2 in universe, 1.4.4 in the PPA === bebend is now known as bebends_xp [05:12] I'm using trusty [05:13] What did you add to your source.list? [05:13] I added "deb http://ppa.launchpad.net/mosquitto-dev/mosquitto-ppa/ubuntu trusty main" to the end [05:16] do any one using odoo [05:17] !ppa | pcglue at your own risk [05:17] pcglue at your own risk: A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge [05:22] !details | nivethitha [05:22] nivethitha: Please elaborate; your question or issue may not seem clear or detailed enough for people to help you. Please give more detailed information, errors, steps, and possibly configuration files (use the !pastebin to avoid flooding the channel) [05:24] In odoo the if the invoice line exceeds more than 9 lines then it over writes the date.. Do anyone know how to increase the number of lines [05:25] nivethitha: where did you download odoo from? [05:27] lotuspsychje, Actually in odoo i have install the sales module [05:27] hello [05:28] nivethitha: cant find odoo in repos, where did you install it from? [05:30] I have installed 15.10. I have a problem with ethernet. When I plug LAN cable in my laptop, it says connection is established, but there is no internet access. Wi-Fi works properly. [05:32] demahum_: tail -f /var/log/dmesg and plugin, see what errors you have [05:32] hi all - if i have 2 nics on a computer, and have 1 external (192.168.x.x) and 1 internal network ip address (10.x.x.x) - can i set two hostnames? how can i set second hostname? [05:32] lotuspsychje, i installed referring from the internet [05:33] !hostname | mib_mib [05:33] mib_mib: Use hostname to set the hostname, or to do it permanently: edit /etc/hosts to include BOTH the old and new hostname and then change /etc/hostname to the new one. WARNING! Make sure that your current hostname and /etc/hosts match, otherwise sudo may not work properly. [05:33] if i just use the /etc/host file to set, will this properly set hostname? what happens if its different from /etc/hostname ? [05:33] lotuspsychje: but i want to set 2 hostnames, one for internal ip and one for external.. ? [05:33] lotuspsychje: I have unplugged and plugged the LAN. It says "Nothing has been logged yet." [05:34] lotuspsychje: so i could set two ip/hostname mappings in /etc/hosts but what would i put in /etc/hostname file? [05:34] demahum_: tail -f /var/log/syslog also ? [05:36] lotuspsychje, i installed referring from the internet [05:36] nivethitha: what do you mean? [05:37] lotuspsychje, i installed odoo by referring the internet [05:38] lotuspsychje: Here is the pastebin from the point when I plug in the LAN (tail -f /var/log/syslog): http://paste.ubuntu.com/12987193/ [05:39] Hello Ubuntu Experts [05:40] demahum_: this looks weird: whoopsie[656]: [07:35:14] Cannot reach: https://daisy.ubuntu.com [05:40] How can i upgrade uubuntu 15.04 to 15.10? [05:40] lotuspsychje: Any idea? [05:40] !upgrade | Sahil [05:40] Sahil: For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes - see also http://www.ubuntu.com/desktop/get-ubuntu/upgrade [05:40] mib_mib, it's /etc/hosts ... makes sense to if your ip address is static [05:41] mib_mib, /etc/hostname is the other to edit, i think there's /etc/mailcap as well to edit [05:41] demahum_: sudo lshw -C network to see wich driver= your card has? [05:41] mib_mib, /etc/mailname rather [05:42] mib_mib, (possibly for the internal logging to pick up the right hostname) [05:42] nivethitha: maybe the #ovoo guys know [05:44] lotuspsychje: http://paste.ubuntu.com/12987206/ [05:45] !realtek | demahum_ [05:45] demahum_: some help for recent Realtek chipsets can be found at https://help.ubuntu.com/community/WifiDocs/Device/RealtekRTL8187b [05:45] demahum_: could be wrong firmware perhaps, wich ubuntu version? [05:45] lotuspsychje: 15.10 [05:45] demahum_: have you installed ubuntu with internet enabled? clean install or upgrade? [05:46] lotuspsychje: Clean install. It was working. During the installation I was downloading updates using LAN. Also after installation it was working some time. [05:46] hmmm [05:46] thats weird [05:46] demahum_: when did this start happen? [05:47] lotuspsychje: I don't remember. [05:47] lotuspsychje: At the beginning, it was working, then it started sometimes to work sometimes not. [05:47] lotuspsychje: Now it doesn't work at all. [05:48] demahum_: might be firmware version, check if you have linux-firmware installed? [05:49] lotuspsychje: Nope. To install it? [05:49] demahum_: try yes [05:49] demahum_: there might be a realtek newer firmware version in there [05:50] lotuspsychje: I'm sorry. linux-firmware is already the newest version :/ [05:50] lotuspsychje: It was installed. [05:50] ok [05:52] demahum_: try a reboot and press ESC or F1 to see whats happening on boot perhaps, when network gets connected over cable [05:55] lotuspsychje: hmm... [05:55] lotuspsychje: I asssume you want me to see the boot in command line (without graphics)... [05:55] demahum_: yes at ubuntu purple screen hit esc or f1 [05:56] lotuspsychje: But my boot is reaaally fast (SSD) that I have no idea how to get to it... [05:56] lotuspsychje: Because it literally shows purple screen for less than a second. XD [05:56] lol [05:56] ok ok [05:57] demahum_: well re-ask your isue in channel togheter with your logs mate [05:57] lotuspsychje: Thanks a lot. [05:57] demahum_: not sure whats happening exactly to your card [05:57] lotuspsychje: No problem. [05:57] lotuspsychje: I am whatsoever quite dissapointed with 15.10. [05:57] lotuspsychje: It is reaally buggy. [05:57] demahum_: I will go with 14.04 for now... :) [05:58] demahum_: if you need stable remain LTS yes [05:58] lotuspsychje: Well... It is not that I need stable... I enjoy new versions... Bugs do not make problem for me. But this ethernet thing is quite annoying. [05:58] lotuspsychje: I have another question... [05:58] sure [05:59] lotuspsychje: I am considering trying another flavor... [05:59] lotuspsychje: Other flavors have names... Kubuntu, Lubuntu etc... [05:59] lotuspsychje: What is the name for the official flavor? [05:59] lotuspsychje: This one I use now... [05:59] !flavors | demahum_ [05:59] demahum_: !Ubuntu-GNOME, !Kubuntu, !Xubuntu and !Lubuntu are simply flavors of Ubuntu that come with GNOME, KDE, Xfce, and LXDE (respectively) installed as default, instead of Unity. Other specialized flavors of Ubuntu include !Edubuntu, Ubuntu !Studio, and !Mythbuntu. [06:00] lotuspsychje: So this (standard) is Ubuntu Unity? [06:00] demahum_: unity is only ubuntu desktop [06:00] !unity | demahum_ [06:00] demahum_: Unity is the default UI since Ubuntu 11.04. Unity is a shell for GNOME. see http://unity.ubuntu.com. For a GNOME 2-like experience, see !notunity [06:01] lotuspsychje: I understand. So there is no some special name for this standard flavor? [06:01] demahum_: with ssd, i would stick to ubuntu desktop 14.04.3 [06:01] demahum_: but feel free to test, lubuntu/xubuntu [06:01] whatever you want [06:01] lotuspsychje: So we call this standard edition Ubuntu Desktop? [06:02] demahum_: yes [06:02] lotuspsychje: Good. Is there a special reason why should I stick to Ubuntu Desktop with SSD? [06:02] demahum_: there is ubuntu-server, ubuntu-touch, ubuntu-gnome etc... [06:02] demahum_: no, unity is just something you like or not [06:03] demahum_: and i like unity for simplicity with my ssd [06:03] lotuspsychje: Good. Now, regarding the development... Ubuntu Desktop is officially supported by Canonical. Is that the same for other flavors? [06:03] demahum_: xubuntu/lubuntu will even go faster on ssd for you [06:03] demahum_: for the official flavors yes [06:04] lotuspsychje: And official flavors are listed here, I assume: http://www.ubuntu.com/about/about-ubuntu/flavours [06:04] lotuspsychje: And all of them use the same base, just the desktop environment is different? [06:05] demahum_: they also use ubuntu as base yes [06:05] demahum_: and supported officially [06:05] lotuspsychje: So basically, command line usage will remain the same? [06:06] demahum_: depending on what you wanna do yes, bash remains same [06:06] lotuspsychje: Good. Thanks a lot. :) I am starting with gnome. :D [06:06] demahum_: you can also testout other flavors on your existing system [06:07] demahum_: lets say you want to test lubuntu on ubuntu-desktop, install lubuntu-desktop [06:07] demahum_: and you can login to your new lubuntu desktop from existing system [06:07] lotuspsychje: I know. But I really want to use all of them for a while. Just to make sure I am familiar with all of them. Sometimes when I come in touch with other flavor, I am confused since I was using only Ubuntu Desktop. [06:08] demahum_: I will try other Linux distros as well, but for now I will stick to Ubuntu. :) [06:08] demahum_: ok! [06:08] lotuspsychje: I will try other Linux distros as well, but for now I will stick to Ubuntu. :) [06:08] demahum_: ubuntu is one of the most popular ones, and has nice support [06:08] test [06:09] lotuspsychje: I agree. But just I want to get familiar with others. :) [06:09] Someone know how to use HAShield on wine. i'm having some framework problems. [06:09] lotuspsychje: I have never used Linux other than Ubuntu. :) [06:09] demahum_: very good! [06:11] #deepin [06:12] hahaha [06:22] hi! #ubuntu-gnome is awfully quiet, so thought i'd ask here. i have gnome-shell eating up ~100% CPU almost all of the time. Is there any way i can diagnose what's causing this? extensions, anything? i tried disabling extensions one by one, but wasn't able to pinpoint [06:22] I just updated to 14.04. The window manager looks gnomey. but I somehow nuked the, uhm, toolbar menu [06:23] like, the menu that give access to dropdowns. like 'file', 'edit', 'preferences'... [06:23] how can I recover them? [06:29] bobdobbs, have you checked the guest account? [06:31] can a machine have multiple hostnames? for instance, i have two nic cards each with ip (i.e. 192.168.x.x and 10.0.x.x) [06:31] wileee: no I haven [06:31] if i wanted to do like my.external.ip and my.internal.ip as hostnames w/ fqdn [06:31] what to put in /etc/hostname file? [06:32] wileee: I expect that on a guest account it'd be fine. I suspect that I've accidently turned off the toolbar menus (if that is what they are called) [06:32] wileee: I must have configured something while not paying attention [06:32] mib_mib: are you trying to set up virtual hosts? [06:32] bobdobbs, If fine in the guest a compiz and unity reset 14.04 specific might work. [06:33] bobdobbs, I'm assuming this is unity. [06:33] mib_mib: this might be helpful: https://www.digitalocean.com/community/tutorials/how-to-set-up-apache-virtual-hosts-on-ubuntu-12-04-lts [06:33] bobdobbs: not sure what virtual hosts exactly are =D [06:33] wileee: I'm assuming it is as well. it's a little unfamiliar to me [06:33] bobdobbs: trying to setup hostnames for internal network [06:34] mib_mib: short answer is yes you can do what you want [06:34] mib_mib: so.. one machine with multiple websites on it? [06:34] bobdobbs, unity has a left side bar, it is the ubuntu desktop [06:34] I am going to bed so I don't have time to give you the answer [06:34] mib_mib: or simply one server answering to multiple names? [06:34] bobdobbs: he is saying one machine with two different ips [06:34] and two different names [06:34] plytro: what goes in the /etc/hostname file then? [06:35] two different IP's. I understand that that is possible. But I've never done it. [06:35] bobdobbs: think of using your machine as your firewall [06:35] it has 2 ips and 2 nics [06:35] an internal and external [06:35] That sounds very possible. But I haven't done that kind of networking for years [06:36] mib_mib: you're going to have to do some reading [06:36] https://serverfault.com/questions/513805/properly-configure-two-eth-interfaces-on-different-subnets [06:36] this guy is talking rhel6 [06:36] but the concepts should be relevant [06:36] quick question [06:36] wileee: would the absence of the menus be a unity thing? Or a compiz thing? [06:36] I don't use host files, I setup bind internally about 5 years ago [06:37] im typing sed -i "s/static char ngx_http_server_string\[\] = \"Server: nginx\" CRLF;/static char ngx_http_server_string\[\] = \"Server: Lol web server\" CRLF;/g" /install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c [06:37] bobdobbs, err, knowing what it is would be a good start. [06:37] wileee: indeed. I expect it's a unity thing. [06:37] but I'm not 100% sure. [06:37] plytro: okay thanks i'll read up - frankly i dont really understand too much of this =D - it would seem it would be easier if i were running my own dns server [06:37] and im getting sed: can't read /install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c: No such file or directory [06:38] but that file is there [06:38] bobdobbs, unity is a plugin in compiz, that blow your mind. ;) [06:38] unity is the window manager right? and compiz manages compositing? [06:38] wileee: woah [06:38] wileee: that kinda does blow my mind [06:38] anyone? [06:38] I mean, in a very gentle way. === not_phunyguy is now known as phunyguy [06:39] !patience | TrenxT [06:39] TrenxT: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/ [06:39] mib_mib: I only setup the dns stuff because I had/have over a dozen devices on the network that I want to all be able to talk to one another without hosts entries all over the place [06:39] i did with no luck [06:40] TrenxT: pastebin the whole output including the ls showing the file is there [06:40] sure [06:42] sigh this seems like the wrong way to go [06:43] mib_mib: what are you trying to acomplish in the end? [06:43] http://pastebin.com/Lzb41h8R [06:43] TrenxT: you are pathing wrong [06:43] i am setting up a hadoop cluster, and **thought** i wanted the machines to use the internal ip addresses / hosts to communicate faster [06:44] i wasn't sure of the repurcussions if i used their external assigned ip addresses and stuff [06:44] i.e. if dns would be slower, etc [06:44] TrenxT: it appears that you are in ~/install/..... [06:44] and you are using /install/..... [06:44] i am following a tut from github [06:44] and thats what it says [06:44] but you either missed a step or something [06:45] do a pwd [06:45] plytro: so i set up a second NIC on all machines and assigned a 10.0.x.x ip address, and want to use that, but cloudera requires use of hostnames [06:45] http://pastebin.com/d3gCRq6y [06:45] you'll see your path is /root/install/nginx-1.8.0 [06:45] theres the part [06:46] yes greate [06:46] but its still wrong [06:46] do a pwd [06:46] you didn't show me the file is where you said it should be [06:46] do an ls /install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c [06:46] it should show nothing [06:46] root@dedi-fr-19369:~/install/nginx-1.8.0# pwd [06:46] ../root/install/nginx-1.8.0 [06:47] then do a ls /root/install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c [06:47] i did on the first pastebin [06:47] and you'll see its there [06:47] if u check the first pastebin when i did an ls it is there [06:47] you did it wrong though [06:47] you just did an ls on your current directory [06:48] no [06:48] yes [06:48] i went to /src/http [06:48] root@dedi-fr-19369:~/install/nginx-1.8.0/src/http# ls [06:48] you aren't understanding how ls works [06:48] when you say "ls /install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c" it is saying show me the file at this exact location [06:49] if you run that command it will come up with no files [06:49] so if the file is there why the command says no such file [06:49] the file isn't there [06:49] the file is at /root/install/nginx-1.8.0/src/http/ngx_http_header_filter_module.c [06:49] if you change your sed command to that path it won't give you an error any more [06:50] so the writer of the tut did it wrong? [06:50] or you didn't extract the tarball where the writer said to/expected it to be installed [06:51] u were correct and no im following the tut 100% [06:52] is this what you are running? https://github.com/Micka33/docker-rtorrent-rutorrent/blob/master/docker_files/Dockerfile [06:52] because that is not a tutorial, that is a dockerfile and all those commands are executed from / not from /root like you are doing manually [06:52] https://raw.githubusercontent.com/Micka33/docker-rtorrent-rutorrent/55ba6bccd3c95fc47c2806880e3b8d7976577be0/docker_files/Dockerfile [06:53] think is the same yes [06:53] yeah that isn't a tutorial [06:53] their file is 100% correct [06:54] adding the /root before did the trick [06:54] but i think i jumped the gun [06:54] right but you're going to hit other problems is my guess [06:54] all of those commands are run as root after doing a "cd /" [06:55] and on a normal system will just pollute shit in places it wouldn't normally be on a interactive machine [06:55] hello？ [06:55] so why it says WORKDIR /install === sorinello_ is now known as sorinello [06:55] because that is a Docker directive [06:55] go back to this https://github.com/Micka33/docker-rtorrent-rutorrent [06:56] on your command line do a "sudo apt-get install docker.io" [06:56] and sudo apt-get install git [06:56] then follow his install instructions [06:57] and the the docker run command may need to be "sudo docker run ........" [06:57] so how do i undo all ive done? [06:58] did you do run the apt-get statement? [06:58] all this came because i was trying to install XMLRPC. [06:58] and when i hit an error in the make process i googled it and sent me to that page [06:58] and you ended up at a torrent client? [06:59] im trying to install rtorrent [06:59] but those are needed stuff [07:00] so what this file does is gives you a virtual machine of sorts that runs rtorrent for you [07:00] if you're only at the nginx step I think your're fine, you may have some files laying around [07:00] but they just take up space no real lasting impact [07:00] extra packages are the same [07:02] but install docker.io and git [07:02] then follow his instructions in the readme.md [07:02] http://pastebin.com/ZVCw9T0R [07:02] look at the error there [07:04] you may be missing the c compiler, if I read that right [07:04] whats the fix? [07:04] sudo apt-get install build-essential [07:05] if it were me... I would just use the dockerfile though [07:05] the c compiler is called cc or gcc, not c [07:05] akik: I thought that was the case [07:05] thing is i dont know what that docketfile thing does [07:06] im a noob here [07:06] you don't know what the make file does either [07:09] hello [07:10] question trying out ubuntu, any new features that are interesting [07:10] TrenxT: maybe this could help you out in compiling rtorrent http://pastebin.com/raw.php?i=yWJMy5NK [07:11] TrenxT: i'm not quite sure what you're doing with nginx [07:12] and putting docker in this equation is not helping you [07:13] hi, there is driver USB 3.0 for ubuntu 14.04 ? [07:15] i have install php5-fpm , its showing 100 cpu [07:17] I am using ubuntu 14.04 [07:18] nabdev: http://askubuntu.com/questions/12139/does-ubuntu-support-usb-3-0 [07:24] What is the upgrade that is available for ubuntu 15.04? [07:25] barq: 15.10 [07:25] sudo do-release-upgrade will do the trick? [07:26] Or anything else I need to consider? [07:26] barq: start update manager, 15.10 should appear [07:26] barq: just a buggy [07:26] baizon: so real [07:26] barq: else run update-manager -d [07:27] greddist: ? [07:27] in unity, is there any way to hide all a window's contents except its title bar? like in lxde [07:27] just a buggy? [07:27] max1, look in unity-tweak and cssm [07:28] barq: ignore him, hes just trolling [07:28] max1: you mean like collapse the window like a shade [07:28] greddist not sure what you mean by 'a shade' but i'll tyr it [07:29] so the person who was helping me left and im so lost limberghs son has no chance of beating me [07:29] max1: ignore greddist, hes trolling [07:29] oh sorry, yeah i get you, like a shade [07:29] wileee: it's not a tweak [07:30] TrenxT: yeah [07:31] anyone else can jump in and help this noob? === hp_ is now known as Guest34426 [07:32] thank god he left [07:32] who [07:32] greddist [07:32] hi [07:32] [03:30] (greddist): asshole [07:32] [03:30] *** ········································ [07:32] [03:30] *** greddist is ~greddist@d5.7b.39a9.ip4.static.sl-reverse.com [07:32] [03:30] *** greddist is «greddist» [07:32] [03:30] *** greddist on holmes.freenode.net [07:32] [03:30] *** greddist on #ubuntu [07:32] TrenxT: yes, i got you big prick [07:33] how is linux [07:33] andyafw: fine, i guess [07:34] cool [07:34] I am trying to figure out how to further my life [07:34] need a better job than walmart [07:34] andyafw: im sorry to say this but... [07:34] andyafw: do you have a specific support question. Chat belongs in #ubuntu-offtopic [07:34] !offtopic | andyafw [07:34] andyafw: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [07:36] ok thanks, sorry [07:36] TrenxT: not sure if you noticed but i pasted an url which shows you how you can compile libtorrent and rtorrent === Beliq_ is now known as Beliq [07:43] akik is not libtorrent causing me the issue... im not there yet [07:43] its XMLRPC [07:45] TrenxT: the compilation of rtorrent didn't require the xmlrpc package [07:45] hi, what would be the easiest way to install an updated pkg version using apt-get on precise and above? (needed for ansible role) [07:46] TrenxT: oh now i see what you're trying to do [07:46] https://raw.githubusercontent.com/Micka33/docker-rtorrent-rutorrent/55ba6bccd3c95fc47c2806880e3b8d7976577be0/docker_files/Dockerfile [07:47] sixth, you get what is in the repos in your computer basically, ubuntu ones supported here, not all are the latest. [07:47] wileee, so i cant have updated software on an old ubuntu version? [07:48] sixth, You can do what you want just be aware of support is all. [07:48] TrenxT: did you reset the c compiler location not to refer to it as 'c' ? === nudtrobert1 is now known as nudtrobert [07:49] so what would be the easiest way to go about it? [07:50] akik this is what im following https://terminal28.com/how-to-install-and-configure-rutorrent-rtorrent-libtorrent-xmlrpc-screen-ubuntu/ [07:50] sixth, You've only outlined a broad idea details are the key here and support related. [07:50] and im stuck at the darn XMLRPC error [07:51] wileee, sorry, can you help me out with what details you need? [07:51] TrenxT: did you reset the c compiler location not to refer to it as 'c' ? [07:51] barney style akik please [07:51] you writing to someone who has to read instructions to do things [07:52] TrenxT: somewhere something has changed the c compiler value/path to 'c'. that does not exist [07:52] sixth, I can't help really, seems you have an idea, no biggie, but this is not a research channel is all, [07:52] akik and how can i fix that [07:53] TrenxT: if you run cc or gcc is that command found? [07:53] Give up and install windows [07:54] both say fatal error no input found [07:54] TrenxT: now you have to find the place where somebody (you?) has changed the compiler to 'c' [07:54] Is kubuntu stopping new releases soon? [07:55] lol.. asking an apple tree to give pears :( [07:55] TrenxT: what you're trying to do is not for novices [07:55] is there a way to wipe out everything and start from 0 if i dont have physical access? [07:55] well, most eaten apples are grafted onto other trees [07:56] TrenxT: well you can create a new user and start fresh [07:56] you can do it with pears on an apple tree and apples on a pear tree, AFAIK, wouldn't surprise me [07:57] but theres no way to delete all the stuff ive installed? === andre is now known as Guest22135 [07:57] TrenxT: what was the problem? [07:58] hitting this brick wall http://pastebin.com/ue2tFPcV [07:58] hidup [07:59] TrenxT: why're you compiling [07:59] all of a sudden i cant change theme with unity tweak tool [07:59] im following a tutorial artois [07:59] brx_: nope [08:00] TrenxT: to achieve what [08:00] to install rtorrent + rutorrent [08:00] i think something went wrong when i closed the laptop lid and it resumed, the screen look garbled and then i needed to cold reboot. after that themes wont change its sticking on default theme [08:00] sudo apt-get install rtorrent ... [08:01] TrenxT: rtorrent is in the universe repo [08:02] im following this https://terminal28.com/how-to-install-and-configure-rutorrent-rtorrent-libtorrent-xmlrpc-screen-ubuntu/ [08:02] this requires the installation of untrusted sources <<< a windows announcing a new ubuntu base plus some other files popped up, what do I do now? [08:03] lettuce45: close it? [08:03] artois, heh., I want the updates [08:04] so install them [08:04] i cant, after clicking ok the updater stops [08:05] http://www.pekanbarucyberteam.co.vu/ [08:06] http://www.pekanbarucyberteam.co.vu/ [08:06] http://www.pekanbarucyberteam.co.vu/ [08:06] Please don't spam [08:06] lettuce45: So pastebin sudo apt-get update; sudo apt-get dist-upgrade [08:06] join me [08:06] No [08:07] http://www.pekanbarucyberteam.co.vu/ [08:08] Howdy Ppl === Senj is now known as Senji [08:09] screw it. I sked for a complete wipeout and fresh instalation [08:10] lets see if that way i can do it the right way [08:12] http://www.pekanbarucyberteam.co.vu/ [08:12] RiauHackerTeam, stop spamming this channel. it's rude. it's a violation of the rules. it makes you look like an idiot. [08:13] he wont now [08:13] hi [08:13] I keep getting segfaults with various applications @ Ubuntu GNOME 15.10 [08:14] Installed the system while it was still beta [08:14] freezer: So run memtext for a couple of hours. [08:14] could that be the reason? [08:14] *memtest [08:14] I ran prime95 for like 24hours with no errors [08:14] rofl.. i did a rm -fr /* [08:14] and stuff like firefox runs for days [08:14] :D [08:14] prime95 is like... totally irrelevant? [08:14] with 20 tabs open [08:14] bekks, that should crash on memory errors? [08:15] freezer: No, why should it? [08:15] It doesnt use all your memory. [08:15] bekks, ok, so apt-get install memtest? [08:15] TrenxT: is that how you create a new user? === andre_ is now known as Guest99005 === Senji is now known as Senj_ [08:15] no [08:16] i asked for a server reinstall [08:16] freezer: It should be installed already, and should be selectable in the grub menu. [08:16] TrenxT: to reinstall ubuntu you don't need to remove any files [08:16] i dont have physical axs === Senj_ is now known as Senji [08:16] bekks, ah memtest86 [08:16] bekks, have to work now, will let it run in the night [08:17] TrenxT: i'm at a loss for words. why would you destroy your os if you don't have access to the machine? [08:18] because the request has been done already [08:18] i got answered back [08:18] TrenxT: oh your server is hosted by somebody else [08:18] yah [08:19] bekks, guess I could try 'memtester' in linux [08:19] just wanted to see what happened if i did that [08:19] freezer: I guess you dont. Run it from the grub menu. [08:19] and just what i thought not 1 simple command works [08:19] :D === CPUID is now known as Guest34277 [08:21] TrenxT: i think you can try to install rtorrent and rutorrent from this ppa: https://launchpad.net/~tikhonov/+archive/ubuntu/rtorrent [08:22] no guarantees === Senj is now known as Senji [08:23] i cant do anything now [08:23] i deleted everything [08:23] not 1 command exists [08:23] need another OS, then [08:24] TrenxT: So wait for the reinstall. [08:24] TrenxT: chill out man. you said somebody is taking care of it [08:24] could a Samsung 850 EVO also cause segfaults? [08:24] i was just saying :/ [08:25] freezer: Unlikely. Segfaults are memory access errors. [08:36] Not sure if this is the correct channel for my question, but I’m trying to do a small bash script that “either finds a text pattern in specified file and does nothing, or does not find text pattern in file and adds to it” - am I right in thinking grep is on the right trac? Having issues figuring out handling the return [08:36] hi, I recently set up linux container on lxd. The container contains trusty server 14.04.43 LTS. How do I confirm that its running upstart or otherwise === zen is now known as Guest38124 [08:38] capsicum1: sudo service --status-all [08:39] fl0w: yes you can use grep to find out that info. if grep doesn't find the pattern in the file, it returns exit value 1 [08:40] Ben64, what am looking for precisely, not that familiar with it. [08:41] well if that works, you're on upstart [08:41] akik: Right, so I’m trying “grep -q “MY_TEXT” FILE && echo $?” but when I know the pattern does not exist in file, it returns nothing (and when it finds it returns 1) [08:41] it worked. thanks [08:43] fl0w: && makes it so that if the first command fails, the second command is not run [08:43] ooh, right - so I can just || instead .. sorry, I had bad luck trying to think there [08:44] akik: much appreciated guidence, thank you. [08:44] Ben64, spent 30 minutes trying to get the container to work in bridge network. Set up the profiles, read the doco (what little there is) and couldnt get it to work. Finally realised the fix wasnt actually in linux, I needed to set promiscious mode in vbox to all. Slight embarrassed [08:44] guidance* [08:44] fl0w: just use a separate if to check what the exit value was === amir_ is now known as Guest36193 [08:45] yea, I am - I was just confused with the return values when preemptively trying to double check my statement [08:45] fl0w: or do you need to create a one-liner? [08:46] nah I don’t, doing a simple .sh script so I have all options available. [08:48] fl0w: that also won't work [08:48] || will only execute if the first one fails [08:48] fl0w: what are you trying to do anyways? [08:49] EriC^^: RIght, noticed that as well, but it doesn’t matter because I’m putting it in an if statement anyway (and I was trying to preemptively check return values from grep) [08:49] When I'm packaging software with systemd unit files - should I depend on systemd? [08:49] if grep -q something /path; then ...... fi; [08:49] https://www.youtube.com/watch?v=Jt-uM5I5uSY [08:49] fl0w: that's a nice method ^ [08:49] EriC^^: I want to add/edit ~/.ssh/config during a vagrant setup (allow agent forwarding) if it’s not enabled on (to specified IP) [08:49] grep -q something && ... [08:50] fl0w, I use a web app called puphpet. It creates the vagrant file. The ssh keys are then locatet in puppet/files/dot/ssh [08:51] p4trix: aye, i prefer to forward ssh keys as I’ll never know who’s installing it - and we’re dependent on private repos in some cases === andre__ is now known as Guest44545 [08:52] I installed Ubunut on my Desktop, but the ethernet conection doesn't work. Here is some relevant info(screenshots of my network configuration): http://imgur.com/a/EtB6q [08:52] EriC^^: That’s what I’m doing (but I’m negating the statement as I only want to add to file if it doesn’t exist). Thanks! [08:52] if only we had an app to manage puphpet for us, so we could use that app to use puphpet to use vagrant to use something else [09:08] I was hoping someone could help me with rsyslog, it appears to be broken. [09:08] See logs: http://paste.ubuntu.com/12987820/ [09:09] I can no longer start,stop,restart rsyslog, regardless of reinstallation. I keep getting "Errors were encountered while processing" at installation and "action "start" failed." when booting it up. [09:11] hello [09:13] Hey guys! Files don't print. Print status goes from "processing" to "stopped". Any suggestions? Ubuntu 15.10 [09:14] Hi! I'm running Ubuntu 12.04.5 (server) and I have a problem with APT after an upgrade ended with a full FS. It urges me to run "apt-get -f install" but that fails with a dpkg (--configure) error. What can I do? [09:15] Micke2, run the command again and pastebinit the outcome [09:15] The output is in swedish ... [09:15] Hello [09:15] forget everything I just said [09:15] lol cfhowlett brilliant [09:16] Anyway, here it is: http://pastebin.com/Qfw7C1qG [09:16] hi [09:17] !se [09:17] Svensk Ubuntu- och Kubuntustöd hittar du i #ubuntu-se resp. #kubuntu-se. Tack! [09:17] tack! [09:17] I can't figure out how I add an alias to my ps -ef and .bashrc files [09:17] ubottu: Tack! [09:17] Someone please can clue me on why a specific nfs mount isnt shown in df? It is mounted, according to "mount" and "cat /etc/mtab". What can I do about it? [09:18] Goodmorning everyone [09:19] My motherboard has a RTL8111/RTL8168 ethernet device. Aparantly, this is not included in the linux kernel. You have to download and compile it yourself. But I cant since I dont have internet without the ethernet driver. Im thinking in putting in a extern pci ethernet card [09:19] any1 know how to solve my printing problem ?> [09:19] Any advice? [09:19] Hey folks. If anyone could give some ideas on how to map CapsLock to Ctrl+Shift? [09:19] meh.. I assume no one knows. [09:19] I have problems with the configuration of aMule. Someone can help me? [09:21] i have a laptop with dual GPUs (intel and nvidia) and an external screen. Will UBuntu play nicely when installed? or is it a hassle to setup optimus drivers and whatnot? [09:22] noregret: generally i have had no problems with ubuntu on my optimus laptop if you need help setting it up just shout [09:22] mjayk: so setting it up is straight forward? [09:23] noregret: yes, you can run into errors but they are easily fixed and only really occur if you deviate from the standard install method (different drivers / beta drivers etc) [09:24] noregret: once it is installed to open a program on your nvidia card you just prefix optirun to the launch command [09:27] mjayk: i have nothing to run under nvidia btw, i just want the external screen to work correctly.. [09:27] cd Sometimes I can just strange linux... [09:27] **without cd [09:28] user friendly, my ass >_> [09:28] So about the key mapping? [09:28] noregret: in that case it should run absolutly fine my external screen works fine without installing or using the 2nd card [09:28] Someone please can clue me on why a specific nfs mount isnt shown in df? It is mounted, according to "mount" and "cat /etc/mtab". What can I do about it? [09:28] Skyrider, no profanity in this channel. [09:29] Is that really 'that' offensive?.. [09:29] Skyrider, this is a family friendly channel. if you can't/won't comply with that community expectation, I suggest you seek support elsewhere. [09:30] meh, fine. [09:30] !paste [09:30] For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. [09:32] bekks: I remember something similar in RHEL, but never worked it out since it was no longer relevant to me. Might find clues here: https://bugzilla.redhat.com/show_bug.cgi?id=1100026 [09:32] bugzilla.redhat.com bug 1100026 in coreutils "'df' command omits mounted NFS shares with the same superblock unless '-a' flag is used. (improve deduplication)" [Medium,Verified] [09:32] and, any output on df /path/to/nfsmount ? === sigsts_ is now known as sigsts [09:33] mjayk: cool [09:34] mjayk: coz i tried gnome 3 on centos 7, and it gave me hell, so i'm switching to ubuntu =) [09:34] ocean: Yeah, that works fine. It is just not showing in "df", but it does in "df /path/to/nfsmount". [09:36] hi all, im setting up a webserver on my ubuntu client. It will be reachable via vpn only, so I wont need any security there. Should I simply use XAMPP or are there any other useful packages? [09:36] noregret: out of the box ive never had any problems, only when i try to upgrade to a different nvidia prop driver manually [09:37] !xampp | rhumbot [09:37] rhumbot: We do not support XAMPP installs here. Please use the LAMP stack that is in our repositories; see https://help.ubuntu.com/community/ApacheMySQLPHP for more information. [09:37] thanks bekks, im not asking for support but for package suggestions [09:37] rhumbot: you were just given them :) [09:37] oh :) [09:37] rhumbot, you might ask #ubuntu-server or #ubunt-offtopic [09:37] I should read more carefully. sorry! [09:38] hi [09:39] kkss [09:39] does anyone know which one this icon theme is? http://i.imgur.com/VGfIH13.png [09:40] it looks good on clearlooks [09:41] Squidward, oxygen if I'm not mistaken [09:41] new from are input guroboy her message ? [09:41] thanks cfhowlett [09:41] ^_^ [09:41] Squidward, happy2help! [09:41] thats not oxygen ... [09:41] sui, please ... === farid is now known as Guest86677 [09:44] fucking all shit yasumaru new [09:44] Squidward, ! clearlooks seems a closer match [09:44] musique, stop [09:44] is there a clearlooks icon theme? [09:44] I don't mean the gtk2 theme [09:45] mjayk: you on 15.10 ? [09:46] im suppose never get same you [09:48] hi [09:48] How to install a certain version in apt-get? [09:48] wouldn't it be: apt-get install -y docker-engine=1.8.3 [09:48] adac, specify the full package name [09:49] cfhowlett, alright that works! apt-get install -y docker-engine=1.8.3-0~trusty [09:49] omg [09:50] adac, happy2help! [09:50] cfhowlett, thank you very much sir! === aaa_ is now known as Guest86666 [09:51] noregret: not at the moment but I had it on a laptop last week [09:51] anyone knows what are the advantages of switching from 15.04 to 15.10 ? [09:52] Twirl: support ends soon for 15.04 [09:52] Twirl: updated packages also [09:52] baizon: how? [09:53] baozon ebm [09:53] baizon: i thought 15.04 was the LTS? [09:53] !LTS | Twirl [09:53] Twirl: LTS means Long Term Support. Until 12.04 LTS versions of Ubuntu were supported for 3 years on the desktop, and 5 years on the server; since 12.04 (Precise Pangolin) LTS versions will be supported for 5 years on the desktop and server. The latest LTS version of Ubuntu is !Trusty (Trusty Tahr 14.04) [09:53] Twirl: 12.04 LTS, 14.04 LTS, 16.04 LTS [09:53] so 15.04 won't be LTS? [09:54] Twirl: is never was [09:54] never will be [09:54] Twirl, it does help to read release notes ... [09:54] yea [09:54] well any particular advantages from switching from 15.04 to 15.10? [09:55] Twirl: Yeah, continued support, since 15.04 will be EOL soon. [09:55] Twirl, support for 15.04 ends ... soon. [09:55] fuk [09:55] when? [09:55] Twirl, release notes. read themz. [09:56] Twirl: https://wiki.ubuntu.com/Releases [09:56] "Ubuntu 15.04 will be supported for 9 months" [09:57] so, how do i know when those 9 months end? [09:57] it doesnt say from when [09:57] Twirl: It was released in April. Now count :P [09:57] ubuntu 15.04 = 2015.04 [09:57] Twirl: year 15, month 04 [09:57] the version is the date! [09:57] Twirl, really? let's see: released in April. count 9 months .. [09:57] Twirl, you might just want to install 14.04 = 3 years desktop support. [09:58] 1 month left [09:58] 5 years [09:58] <_KaLiF> i had dual boot psx and ubuntu 15.04 when i updated on 15.10 i cannot boot on ubuntu the partition still exist [09:58] <_KaLiF> maybee use live cd [09:58] Ben64, true. only 3 years on xubuntu [09:58] so, 15.10 up to when? [09:58] or use ubuntu server and install a desktop package of your choice [09:58] cfhowlett: still? i thought they went to 5 [09:58] <_KaLiF> before i use Alt only for booting on osx [09:58] Twirl: use math [09:58] Twirl: 9 monzhs from April results in not 11. [09:58] Twirl: i posted a link where you have all the information [09:58] Ben64, as xfce provides only 3 years support, xubuntu = 3 years [09:59] baizon: nice, just see it [09:59] <_KaLiF> how can i configure the bootloader>>> [09:59] cfhowlett: yeah i thought they went up to 5 too [09:59] sadly, no [10:00] php5-fpm using 100% cpu [10:00] can anyone please help me [10:00] do as are you comedian ? [10:01] so is there any advantage from 14.04 to 15.10? [10:01] <_KaLiF> apt-get get down [10:01] LTS [10:01] Twirl: Longer support. LTS. [10:01] hello, my friend is trying to install ubuntu on his laptop but the installation fails because there "isn't enough space", what doesn't have enough space? the USB drive he's installing it from(4GB)? the RAM(3GB)? the target HDD(80gb)? [10:01] bekks, cfhowlett no that is from 15.10 to 14.04 i mean the other way around [10:01] munsking, probably the HDD. did he partition? [10:02] Twirl, for long term support, install LTS> stop worrying about the version number [10:02] cfhowlett: im not asking about that [10:03] munsking: well he did something wrong while installing, or the hard drive is broken [10:03] cfhowlett: we can't even get to the partitioning part, it crashes before that, that's why it's so weird [10:03] cfhowlett: is there any advantage to switch from 14.04 to 15.10? [10:03] IS there a way to get chrome desktop notifications in ubuntu?(mainly for gmail) [10:03] Twirl: No. [10:03] noregret: any luck :) ? [10:03] Twirl, IMHO, no. [10:03] YMMV [10:03] baizon: the hdd isn't broken, i had arch installed on it before putting it in his laptop [10:04] Twirl: Switching involves upgrading to 14.10 (EOL), upgrading to 15.04, upgrading to 15.10 [10:04] bekks: no im already at 15.04 [10:04] Twirl: You asked about 14.04 to 15.10. [10:04] munsking: then maybe he picked the wrong hard drive [10:04] munsking, 3 gb is rather on the minimal side, but would not throw an "out of space" error. [10:04] bekks: yea because ppl are suggesting i downgrade [10:04] not downgrade, install 14.04 [10:04] bekks: anyways im wondering if there is any real advantage like speed etc [10:05] Twirl: Reinstall, not downgrade. [10:05] Twirl: LTS gives you longer support. [10:05] theres not really going to be any speed differences between versions [10:05] !lts , this might clarify you a bit | Twirl [10:05] chotaz`w: I am only a bot, please don't think I'm intelligent :) [10:05] and if there was, you'd get it soon by LTS enablement === AndChat|486164 is now known as rickardve2 [10:06] not only speed but other improvements? [10:06] that was just the first thing that crossed my mind [10:06] Twirl: main advantages are faster software updates and generally better hardware support, downsides are support length and possible stability === administrator is now known as Guest33314 [10:06] it could be anything, better networking [10:06] Twirl: http://www.hecticgeek.com/2015/04/ubuntu-15-04-review/ [10:07] mjayk: sounds good [10:07] Twirl: http://askubuntu.com/questions/613567/what-benefits-would-i-see-upgrading-from-14-04-to-15-04-and-what-are-some-caveat [10:07] baizon: nice [10:07] Twirl: Hardware enablement stacks backport these features to LTS. So basically: use LTS. [10:08] thanks pooh === administrator_ is now known as newuser [10:08] list [10:08] bekks: i doubt there is no real advantage of switching to newer versions [10:08] Twirl: as bekks said use LTS unless there is a feature you need that is not there or hardware support which is not there yet [10:09] Twirl: You may doubt whatever you like, we are just telling you the facts. :) [10:09] mjayk: so 15.10 should support that out of the box, right ? [10:09] noregret: for me yes it did i used it on a 730m and intel [10:09] bekks: dont say 'we', also i see tons of improvements in the blog post that mjayk shared [10:10] Twirl: I say "we", since "we" are more than just me who told you the same. [10:10] mjayk: cool, thanks. It is currently getting installed [10:10] noregret: but to use the nvidia gpu you need to install some stuff, however if you dont want it then (for me) it just worked [10:10] bekks: nope cfhowlett said YMMV [10:10] Twirl, so far as I can see, your question was asked and answered. please leave me out of further discussions. [10:10] cannot talk this noobi [10:11] noregret: everything that went wrong for me happened on my first install after i tried to install some beta drivers from the nvidia website and then went on to mess up some config files [10:11] cfhowlett: sorry [10:14] hello everyone [10:14] good morning [10:14] :-) [10:15] anyone arround? [10:15] MBorges, ask your ubuntu question. [10:15] !ask | MBorges [10:15] MBorges: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [10:16] thanks for clearing that up friends. :-) === andre_ is now known as Guest52773 [10:17] I'm trying to move a server 2003 network ad to ubuntu server samba 4 [10:17] !server | MBorges the server channel would probably be better [10:17] MBorges the server channel would probably be better: Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is !Trusty (Trusty Tahr 14.04) - More info: http://www.ubuntu.com/products/whatisubuntu/serveredition - Guide: https://help.ubuntu.com/lts/serverguide - Support in #ubuntu-server [10:18] ok thanks. I'll ask there. :-) [10:18] And thanks again for being frendly... havent used irc for almost 15 years... lol === greyback__ is now known as greyback === rahulprodev is now known as last_goat === bazhang_ is now known as bazhang [10:40] hello [10:40] why does apt get stuck at: 100% [1 Packages bzip2 0 B] [Waiting for headers] [10:40] i tried several mirrors [10:41] it happens when i run apt-get update [10:42] leeyaa: do you perhaps have ipv6 enabled but no proper routing via your ISP? [10:42] leeyaa: try "sudo sysctl -w net/ipv6/conf/all/disable_ipv6=1" before you run apt-get [10:43] hateball: i strongly doubt it has anything to do with the isp. servers are in a dc [10:43] <_KaLiF> and if i try sudoku su [10:43] leeyaa: can you pastebin your /etc/apt/sources.list maybe the problem is in there [10:43] leeyaa: and your servers talk to the mirrors using not an ISP, but... magic? [10:43] mjayk: i tried multiple mirrors [10:44] leeyaa, lsb_release -a | nc termbin.com 9999 [10:44] <_KaLiF> apt-get get down [10:44] _Kai_, [10:44] could somebody with linux-image-3.19 do a modinfo ixgbe for me? [10:44] !behelpful | _KaLiF, [10:44] _KaLiF,: As our !guidelines say, "When helping, be helpful". If you're not familiar with the issue at hand, let someone else handle it instead of making !offtopic comments or jokes. [10:45] I can't get my Intel X540 10GBe network card to work. [10:45] I did an "apt-get dist-upgrade" on my production machine running 14.04 LTS. Was this stupid? Is there a way to rollback? I want to stay on the most stable path as possible === rafaelcenteio1 is now known as rafaelcenteio [10:45] hi, how can i run a .swf? I've installed flash player on my xubuntu but it doesn't run. Can anyone help me? [10:45] <_KaLiF> i prefer joking... sorry [10:45] ixgbe version 3.15.1-k is running here [10:45] hjjg, http://paste.ubuntu.com/12988382/ [10:45] cfhowlett: you could ask me which version im using ;p [10:45] its 14.04 lts [10:46] bijan_: afaik you cant rollback [10:46] bijan_, that command will bring you to the latest 14.04.3 [10:46] cfhowlett: thank you! [10:46] hjjg, happy2help! [10:46] hateball: no but i have other servers there that dont experience this [10:46] be right [10:46] but cut off [10:46] so beeing on 14.04.03 LTS is okay for me [10:46] but I don't want any unstable packages [10:46] bijan_, no reason it should not be. [10:46] which transition package should I use if I want to get kernel 3.19 instead of 3.13 on ubuntu LTS? [10:47] in general what can be the reasons for slow apt [10:47] kernel 3.19 latest. with updates :) [10:48] AFAIK I should not use "apt-get install linux-image-extra-3.19.0-31-generic" as this would not update the kernel if there are patch releases === nudtrobert1 is now known as nudtrobert [10:51] which kernel is supposed to be used with 14.04.03 LTS server? [10:52] hjjg: linux-generic-lts-vivid in that case [10:52] bijan_: http://packages.ubuntu.com/search?keywords=linux%20image%20server&searchon=names&suite=all§ion=all [10:53] 3.13.0.66.72 [security]: amd64 i386 ? [10:53] bijan_: yes [10:54] thx [10:54] bijan_: well but you can also use newer one if you want [10:55] bijan_: https://wiki.ubuntu.com/Kernel/LTSEnablementStack [10:55] baizon: no need for that. I just want the latest stable [10:55] hola [10:55] my cloudhoster (digital ocean) makes me manually select kernels from their admin panel [10:56] bijan_: ou ok [10:57] hi, how can i run a .swf? I've installed flash player on my xubuntu but it doesn't run. Can anyone help me? [10:58] ukulele: https://apps.ubuntu.com/cat/applications/gnash/ [10:59] baizon, it doesn't work. The same file works fine on W7. [11:01] ukulele: well, abobe doesnt support any other platform then windows. Have you tried running it with gnash? [11:01] anyone know of any efficient way to setup cifs share through cli? [11:01] hi everyone. [11:01] LaserAllan: Edit the smb.conf [11:01] who can help me? [11:01] https://www.ubuntu-user.com/Magazine/Current-Issue [11:02] ukulele: you can open it with the browser, like firefox [11:02] who bought the issue as a PDF? [11:02] dupingping: you know that this is offtopic in here [11:02] baizon, i did it but it doesn't work as it should. It's an interactive video lesson but it shows me just the very first clip, nothing else. [11:02] yes, i see. [11:02] bekks: The thign is tha tI have a NAS and a ubuntu server that i want to be able to acess the files on the NAS via cifs [11:02] To do that do i only have to edit that conf file? [11:02] Hello, I want to give my pc a network name so instead of access it by IP I can access it by name, so it can be connected by ethernet or wireless and the name is always the same (I cant give him a fix IP) [11:03] how can I do that? [11:03] LaserAllan: So consult the documentation of the NAS on how to create CIFS shares. [11:03] I guess I also have to setup a rc.local script to make that do it on every startup [11:03] LaserAllan: you dont have to touch rc.local at all. [11:03] ukulele: open it in your webbrowser? [11:03] baizon, it doesn't work. [11:03] ukulele: else you can try chromium which has an integrated flash [11:03] baizon, i did. Same as firefox. [11:04] So how can i make the ubuntu server connect to the nas with cifs on startup? [11:04] LaserAllan: Edit your /etc/fstab for mounting your shares. [11:04] ukulele: well then im sorry, i havent used flash for a year now [11:04] ukulele: maybe someone else can help in this matter [11:05] ok apparently someone decided to use noatime,nodiratime,errors=remount-ro 0 1 for mount options for / [11:05] what the hell [11:06] baizon, thanks. Any way to convert an .swf file in something else? Just asking [11:06] oh i mean sync,errors=remount-ro 0 1 [11:06] why would you add sync -.- [11:06] bekks: Im quite new to this, what i dont udnerstand is how i can make the ubuntu machine connect to the freeNAS share on startup. [11:06] LaserAllan: By adding the shares you want to mount to /etc/fstab [11:06] !fstab | LaserAllan [11:06] LaserAllan: The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See https://help.ubuntu.com/community/Fstab and http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions [11:07] LaserAllan: here's an example fstab line //server/share /home/username/share cifs user,_netdev,cache=none,credentials=/home/username/.cifs-credentials 0 0 [11:08] Hi! I recently installed 15.10 on an optimus laptop. Tried getting bumblebee to work, but it left me with a faulty 'xorg.conf', which gets regenerated every boot. Tried removing all packages listed in the latest entries of '/var/log/apt/history.log', so I could at least use the intel driver, but still faulty 'xorg.conf' every boot. Could really use some help [11:08] bumblebee is old and bad, use nvidia-prime instead, it comes with ubuntu [11:09] tried that too.. nvida-current crashed X [11:10] LaserAllan: you can find the syntax for the cifs credentials file here: https://www.samba.org/samba/docs/man/manpages-3/mount.cifs.8.html [11:10] unclutter: tried it when? you might have messed stuff up with bumblebee [11:11] hey ive been continually working on this multiplayer draw web app would be nice if people could try draw on it for testing purposes at https://udraw.me cheers [11:11] Ben64: I might, but I could never get the nvidia driver to work in the first place [11:12] what video card [11:13] geforce GT 555M === Guest49876 is now known as HarryCross [11:15] unclutter: well that is supported, so maybe reinstall 14.04 and this time don't do any bumblebee stuff, and have the internet connected during install [11:16] found this bug report though: https://bugs.launchpad.net/ubuntu/+source/bumblebee/+bug/1508573 [11:16] Launchpad bug 1508573 in xserver-xorg-video-intel (Ubuntu) "X11 keeps booting in failsafe mode due to xorg.conf having the nvidia set as primary GPU. " [Undecided,Confirmed] [11:17] unclutter: bumblebee is deprecated. nvidia-prime is the new method supported from nvidia [11:17] yep thats what i said [11:18] Thanks guys [11:18] THis is really helpful:) [11:20] Shouldn't purging bumblebee remove all traces of it? [11:22] unclutter: only the things that are made during install. not the things that are made from the program on first run etc. aptget cant know about that [11:22] A little help please. My full desktop appears to be showing (inside VM), but Settings window is only showing part and I can't scroll to see the rest of it. [11:22] Is this a Ubuntu issue or a VBox issue? [11:23] skinux: hold alt key and grab with the mouse and shove the window [11:23] Shove the window how? Because that doesn't seem to be helping any. [11:24] hello all [11:25] it sounds like the vbox window is too small to show the whole windows inside the vm. so you need to shove the windows. or you make the vm window bigger [11:25] skinux, yep. screen resolution in that vbox [11:28] he says his whole desktop shows though, kind of odd [11:33] Here is what I see: http://imgur.com/ozbvb6n [11:33] skinux: way too small vm window /resolution. make sure you install the guest additions === megabit|away is now known as megabitdragon [11:41] unattended-upgrade does not correctly check for dpkg lock and started while i was running another apt-get install process, and now my system is broken. === JackH_ is now known as JackH [11:44] how can i report this bug without spending hours with the broken bugtracker website? [11:44] !bugs [11:44] If you find a bug in Ubuntu or any of its derivatives, please file a bug using the command « ubuntu-bug » - See https://help.ubuntu.com/community/ReportingBugs for other ways to report bugs. [11:50] great, i need to open a browser, but my browser was broken by the bug! [11:50] It's taking a while to install Guest Additions [11:50] join #ipfp [11:51] I really don't like running Ubuntu in a VM inside Windows. But difficulties in dual-booting my system force me into it for now. [11:51] I'm only doing so because it's proving to be a bitch to get Ruby on Rails setup on Windows. [11:52] why does all things ubuntu have a consitently low quality, to the point where canonical need to have a "thousand papercut"-project to attempt to deal with the low quality code? [11:52] it's great to try to fix the thousand papercut bugs, but as long as new ones are produced at canonical it's a dead end [11:52] feitingen: i dont think that discussion brings you some advantage now, does it? [11:53] feitingen: Good point on the bug. But why are you attempting an upgrade and at the same time installing a package? [11:55] agent_white: unattended-upgrade started without my knowledge while i was installing some programs and destroyed the pkgcache, and now i'm just ranting :/ [11:55] feitingen: Ahhhh! That isn't good... I hope you do report it then. [11:55] what do you mean by the pkgcache? [11:56] There are bugs to fix, then BUGS to fix. :P [12:00] EriC^^: just what the first apt-get complained about. i think the problem is around Unattended-Upgrade::AutoFixInterruptedDpkg, it checks if the dpkg journal is dirty and fixes it if it is, but this time it was dirty for a reason [12:01] which is a "dpkg --force-confold --configure -a" === flint is now known as Guest71104 [12:01] hateball: thank you! linux-generic-lts-vivid is great :) [12:01] hjjg: :) [12:03] k1l: which shouldn't be able to fix it with an active lock, which my other apt-get process should have, so that seems to be a dead end. I wonder where the problem is then [12:05] does unattended-upgrades have a log in /var/log? === user is now known as Guest55405 [12:06] EriC^^: it runs under a cronjob, so gets triggered by cron.daily in syslog, or check /var/log/apt/history [12:06] feitingen: ^ [12:07] hey guys, i'm not linux master, could you take a look at my problem [12:07] i've tried to install gcc-multilib but then something's awfully broken [12:07] Thanks for the help guys. Got the problem solved [12:07] so i can't even uninstall it [12:07] gcc-5-multilib : Depends: libc6-dev-i386 (>= 2.11) but it is not going to be installed [12:07] mikkqu, post your error messages [12:08] E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). [12:08] this is the output from apt-get remove gcc-multilib [12:08] apt-get -f install doesn't help also [12:09] mkxcpp@xmikhka:~$ sudo apt-get -f install [12:09] Preparing to unpack .../libc6-dev-i386_2.21-0ubuntu4_amd64.deb ... [12:09] Unpacking libc6-dev-i386 (2.21-0ubuntu4) ... [12:09] dpkg: error processing archive /var/cache/apt/archives/libc6-dev-i386_2.21-0ubuntu4_amd64.deb (--unpack): trying to overwrite '/usr/include/fpu_control.h', which is also in package libc6-dev-amd64:i386 2.21-0ubuntu4 [12:09] Errors were encountered while processing: /var/cache/apt/archives/libc6-dev-i386_2.21-0ubuntu4_amd64.deb [12:10] can you advise some workaround to this? [12:10] hi room [12:11] maybe remove the libc6-dev-i386 mik [12:11] mikkqu: ^ [12:11] mikkqu: type arch [12:11] i have one problem i have a Ubuntu 15.04, i connetc this from ssh but not with SFTP. you can help me? [12:11] arch x64-86 [12:11] mkxcpp@xmikhka:~$ sudo apt-get remove libc6-dev-i386 [12:11] Package 'libc6-dev-i386' is not installed, so not removed [12:11] You might want to run 'apt-get -f install' to correct these: [12:11] The following packages have unmet dependencies: gcc-5-multilib : Depends: libc6-dev-i386 (>= 2.11) but it is not going to be installed libc6-dev-x32 : Depends: libc6-dev-i386 (= 2.21-0ubuntu4) but it is not going to be installed [12:11] E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). [12:11] And in the future, good to check to see what packages rely on it with `apt-cache rdepends` [12:13] it seems to me I should remove them somehow bypassing apt-get manager [12:15] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1365375 [12:15] Launchpad bug 1365375 in eglibc (Ubuntu) "package libc6-dev-i386 (not installed) failed to install/upgrade: trying to overwrite '/usr/include/gnu', which is also in package libc6-dev-amd64 2.19-0ubuntu6.3" [Undecided,Confirmed] [12:15] looks like it's known bug [12:16] mikkqu: `dpkg --remove libc6-dev-i386` - `apt-get install -f gcc-multilib` ? [12:17] agent_white: >> Package 'libc6-dev-i386' is not installed, so not removed [12:17] and I can't install it because it conflicts with libc-dev-amd64 [12:17] they tring to overwrite the same file /usr/include/fpu_control.h [12:18] uh... uninstalled libc? thats a bad idea [12:18] I only just noticed this... there's no clock... anywhere... [12:18] Um. [12:18] mikkqu: try dpkg -P --force-remove-reinstreq libc6-dev-i386 [12:18] i don't have libc6-dev-i386 installed because I have libc-dev-amd64 installed [12:18] *libc6-dev-amd64 - and they conflicting with each other [12:19] i'm on x86_64 arch [12:19] Install libc6-dev-i386 ? [12:19] agent_white: >> and I can't install it because it conflicts with libc-dev-amd6 [12:19] They shouldn't conflict... [12:19] mikkqu: that dpkg command should work, did you try it? [12:20] EriC^^: I've tried it, it tells me that the package is not installed - nothing to remove [12:20] agent_white: here is the output [12:20] Unpacking libc6-dev-i386 (2.21-0ubuntu4) ... [12:20] dpkg: error processing archive /var/cache/apt/archives/libc6-dev-i386_2.21-0ubuntu4_amd64.deb (--unpack): trying to overwrite '/usr/include/fpu_control.h', which is also in package libc6-dev-amd64:i386 2.21-0ubuntu4 [12:20] Errors were encountered while processing: /var/cache/apt/archives/libc6-dev-i386_2.21-0ubuntu4_amd64.deb [12:20] mikkqu: are you sure? [12:21] EriC^^: [12:21] mkxcpp@xmikhka:~$ sudo dpkg -P --force-remove-reinstreq libc6-dev-i386 [12:21] dpkg: warning: ignoring request to remove libc6-dev-i386 which isn't installed === andre is now known as Guest13681 [12:21] man dpkg says "A package marked reinst-required is broken and requires reinstallation. These packages cannot be removed, unless forced with option --force-remove-reinstreq" [12:22] mikkqu: if you're brave enough, you could try dpkg -P --force-all libc6-dev-i386 [12:22] EriC^^: [12:22] mkxcpp@xmikhka:~$ sudo dpkg -P --force-all libc6-dev-i386 [12:22] dpkg: warning: ignoring request to remove libc6-dev-i386 which isn't installed [12:22] EriC^^: thanks, sorry about the rant [12:22] feitingen: np :) [12:23] salut à tous [12:23] mikkqu: `sudo dpkg --add-architecture i386` -- then try again. [12:23] mikkqu: When did you update last? [12:23] I'm on the latest release possible [12:23] 15.10 with recent update (about a week ago) [12:24] sudo dpkg --add-architecture i386 [12:24] After you run that command, update again. [12:24] doesn't help, the same error occured [12:24] dpkg: error processing archive /var/cache/apt/archives/libc6-dev-i386_2.21-0ubuntu4_amd64.deb (--unpack): trying to overwrite '/usr/include/fpu_control.h', which is also in package libc6-dev-amd64:i386 2.21-0ubuntu4 [12:25] looks like both these packages really wants this file [12:25] hahaha [12:25] I accept the fact that I can't have them both. so, how do I clean everything up now [12:25] mikkqu: maybe if you remove libc6-dev-amd64 [12:25] EriC^^: i think that's not really good idea [12:26] it's just a dev package though no [12:26] let me see what will be removed too on my system [12:26] basically the compilers will be removed === andre_ is now known as Guest44177 [12:27] mkxcpp@xmikhka:~$ sudo apt-get remove libc6-dev-amd64 [12:27] You might want to run 'apt-get -f install' to correct these: [12:27] The following packages have unmet dependencies: gcc-5-multilib : Depends: libc6-dev-i386 (>= 2.11) but it is not going to be installed libc6-dev-x32 : Depends: libc6-dev-i386 (= 2.21-0ubuntu4) but it is not going to be installed [12:27] E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). [12:27] sorry for spam, fail again [12:27] mikkqu: try sudo apt-get -f remove libc6-dev-amd64 [12:27] i think that should work [12:27] EriC^^: just the same message [12:28] mikkqu: ok, maybe remove with dpkg then [12:28] you just need to get it removed, to remove the other libc6-dev-i386 after it installs [12:28] EriC^^: ok, removed it [12:28] then reinstall the dev-amd64 [12:28] and libc-dev-i386 installed succesfully [12:28] mikkqu: ok, now run sudo apt-get -f install [12:28] ok, now remove the -dev-i386 [12:29] mikkqu: Also, you may need to remove gcc before adding gcc multilibs. As the multilibs package replaces gcc. [12:30] oops [12:30] after i run "apt-get remove gcc" [12:30] it removed nvidia drivers, build-essential [12:30] and a lot of stuff [12:30] mikkqu: Remove libc6-dev-x32, then remove libc6-dev-i386, then try again. [12:34] sudo apt-get install tells me that: libc6-amd64:i386 libc6-dev:i386 libc6-x32 no longer required [12:34] although gcc works fine now [12:34] mikkqu: Makes sense since you're moving to the multilib version. [12:36] yeah, I unistalled the crap, installed gcc-multilib and now everything works fine [12:36] I started it all just to be able to compile with -m32 on AMD64 machine [12:36] and it works now, thanks! [12:37] after installing xfce (not using it, using unity at the moment) my notifications for sound volume have disappeared. others remain (though are in xfce style). how to fix? [12:42] howdy! anyone know of a backported modern version of curl for 12.04? google turns up nothin, and 7.22 only supports TLS1 :-/ [12:42] ciao [12:44] ratbuddy__, is it hard to build? [12:44] not sure, that's a bit over my head :P [12:45] ratbuddy__: see !ppa, but https://launchpad.net/~rsrchboy/+archive/ubuntu/ppa/+build/5650410 [12:45] Halo [12:45] hmm, also need an updated perl WWW::Curl::Easy to support TLS 1.1 and 1.2 [12:45] ratbuddy__: also http://linuxg.net/how-to-install-curl-7-36-0-on-ubuntu-linux-mint-pinguy-os-and-elementary-os-systems/ [12:47] thanks somsip but the second link doesn't apply to 12.04 :) [12:47] first link is promising though [12:48] ohh it's a new repo [12:48] shoot, I don't think I'm allowed to use those [12:48] ratbuddy__: "In this article I will show you how to install cURL 7.36.0 on Ubuntu 14.04 Trusty Tahr, Ubuntu 13.10 Saucy Salamander, Ubuntu 12.0" so I'm surprised, but oh well [12:48] missed "4" on paste [12:49] !ppa | ratbuddy__ (you need to be aware of this though) [12:49] ratbuddy__ (you need to be aware of this though): A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge [12:49] will have to check with security if I can install from there :-/ [12:49] ciao [12:49] !list [12:49] JOKERX: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ». [12:50] mjayk: i was viewing ubuntu after i finised installation with the exernal screen. i remove the VGA plug of the external screen and ubuntu reboots.. what could I do now? should I go ahead and install the drivers or something ? [12:51] !list [12:51] JOKERX: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ». [12:52] I'm on 64 bit. Need to install a 32 bit vlc. what is the CLI command? [12:56] cfhowlett: why 32-bit? apt-get install vlc:i386, should do it [12:56] hateball, I'm setting up a USB for carry around. [12:58] hateball, I'm going to download / save the .debs to the USB. === newbie is now known as Guest82236 [13:12] I'd like to install ubuntu on a machine with FreeDOS. It's got UEFI, so I'd like to be careful when I set up partitions, since I'd like to install windows 10 later. Can anyone give me advice on partition sizes & types? I'm going for 100G Ubuntu, 200G Windows and 700G data. What size should I set up for a EFI boot partition? [13:19] poppingtonic, my /boot/efi = 525mb === jones_ is now known as NicholasCage [13:23] http://sprunge.us/jeiD - I have no idea why I can't get my Banshee media player to work or how I would go about, would gladly appreciate the help [13:31] My Banshee player crashes when I start it [13:31] cfhowlett: Alright, that's cool. What about a physical volume for encryption? [13:32] poppingtonic, I don't use one or have enough knowledge to advise. ask someone else. sorr [13:32] NicholasCage: You might try clearing out the library, and then importing the music again. This will loose all your playlists though. [13:33] hi [13:33] Rexter: Did you view my sprunge and base that reply on what the error report stated? [13:33] how can I specify a fingerprint for apt-key adv --recv-keys which needs to match and otherwise results in an abort? [13:33] NicholasCage: no, just walked in [13:33] Rexter: oh.. [13:33] http://sprunge.us/jeiD Well here's the sprunge, this is what it says when I open it through terminal === michaelni__ is now known as michaelni [13:36] mjayk: there? [13:39] cfhowlett: ok [13:39] NicholasCage: Do you think Banshee uses Mono? It seems too old for that. [13:39] No idea at all man [13:39] what's the recommended size for a physical encryption partition if my ubuntu partition is 100G? [13:40] NicholasCage: well there is a clue at the botom, about an issue with the mono runtime. have you tried reinstalling Banshee? [13:42] hey folks... need a hand here... im typing this command and im getting a pesky error [13:42] sudo ln -s /etc/apache2/mods-available/scgi.load /etc/apache2/mods-enabled/scgi.load [13:42] !solved it [13:42] ln: failed to create symbolic link ‘/etc/apache2/mods-enabled/scgi.load’: File exists [13:42] I erased the .config file and rescanned my library :3 [13:42] ln failed to create symbolic link ‘/etc/apache2/mods-enabled/scgi.load’: File exists [13:43] NicholasCage: any luck? [13:43] any ideas? [13:43] TrenxT: what's your source file? [13:43] you want to link mods-available/scgi.load to mods/enabled.scgi.load, right? [13:44] *mods-enabled [13:44] poppingtonic im a noob at this try to help me with the terminology :D [13:44] im following a tut to install rtorrent [13:45] http://pastebin.com/EbXFSE95 [13:45] thats where im at... but the first command is showing that "error" [13:45] "ln -s /path/to/file /path/to/link" means "create a link from /path/to/file to /path/to/link" [13:46] TrenxT: you've been doing that for hours, why not just use the version in ubuntu? [13:46] trying to learn a bit Ben64 [13:47] so if it says file exists im ok and can continue? [13:47] learn what, how to spend 6 hours doing something that could have been solved by "sudo apt-get install rtorrent" ? [13:48] :/ [13:48] ok ill do that.. what happens with all the steps i took then? [13:48] i don't know what steps you took === yy is now known as Guest57926 [13:49] http://pastebin.com/0sJXgsQz [13:49] that [13:50] NicholasCage: Great, I've seen that before. Even simple corruption is the library can so that. [13:50] TrenxT: thats it? [13:50] yes [13:50] none of that will affect it [13:51] so do what u said? [13:51] is your goal just having a web accessible torrent client [13:51] yes [13:51] rtorrent + rutorrent [13:51] deluge is in the repositories, and has a nice interface [13:52] no ive used it. dont like it [13:52] you put torrents in one side and files come out the other [13:52] there's transmission, which also has a web interface [13:52] same as everything else [13:52] ive used them in son seedboxes [13:52] i like rtorrent better [13:52] some( [13:53] so Ben64 [13:53] ok well rutorrent isn't in the repositories so you'll have to do that yourself [13:54] TrenxT, I use deluge for the exact same problems and it has cleanly fulfilled my needs, but if you need rtorrent for any specific feature or just out of pure stubbornness, here: http://linoxide.com/ubuntu-how-to/setup-rtorrent-rutorrent/ [13:57] will give this a shot [13:57] there is a ppa for rtorrent & rutorrent [13:57] https://launchpad.net/~tikhonov/+archive/ubuntu/rtorrent [13:58] somebody's done the heavy lifting for you [13:58] ppa's are not supported here akik [13:58] s/problems/purposes [13:58] speaking of ppa's is forbidden? [13:58] ping [13:59] not supported <> forbidden [13:59] !ppa | akik full disclosure is not [13:59] akik full disclosure is not: A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge [13:59] as in, most people won't be able to help you with but someone might, out of their own experience. [14:00] hi, I tried Filezilla for my FTP connections but it freezes when I browse thru the directories. Do you have any o other software to recommend? === user is now known as Guest1845 [14:00] when i wrote about this to TrenxT earlier, i told he's trying to do stuff that is not for novices [14:00] MarcoPau bareftp is nice and easy [14:00] also "no guarantees" about the ppa [14:01] MonkeyDust: will try it right away. thanks for the hint [14:01] gFTP as well [14:01] MonkeyDust: whoops, that's for gnome. I run KDE.... [14:01] is very easy [14:01] is this channel only for gnome users? [14:02] MarcoPau, Not necessarily, but #kubuntu might be a better place, or #kde itself. [14:02] !knock #kubuntu [14:02] this channel is for any official ubuntu flavor [14:02] and you can use nautilus ftp [14:02] ftp on nautilus [14:02] my buddy has a challenge at school, change a windows background without mouse or keyboard, what do you all think of using a ubuntu live usb and having a startup script that does that [14:03] jjjj85, sounds more like a prank than anything that would make sense asigning to a class. [14:03] jjjj85, easy, hit the power switch with one finger, solved. [14:04] today's homework try to format the pc without using mouse [14:04] MarcoPau: you can access FTP in Dolphin [14:04] afternoon MonkeyDust [14:04] OerHeks, excellent observation. ;) [14:04] that's what he said, hit the power button [14:04] lotuspsychje [14:04] MarcoPaul: check this url https://help.ubuntu.com/community/gFTP [14:06] MarcoPau: open Dolphin, click Network on the left, click the Add thingy, follow guide, done [14:08] what's the command to change the keyboard layout again, xkeyb... something [14:09] MonkeyDust: setxkbmap [14:09] tnx === BOHverkill is now known as BOHverkill___ [14:14] hello world [14:17] okay, so I'm my live enviroment, does anyone know of a way to make ubuntu mate automatically boot up instead of giving you the option to run live or install [14:19] jjj85, install ubuntu on a 2nd usb, be sure that the grub bootloader is also installed on that usb, not on your current live session [14:19] hateball: I don't see "Network" on the left... [14:19] thanks chotaz`w [14:20] MarcoPau: hmmm, are you on Plasma 5? at any rate you should be able to enter "ftp://whatever" in the url bar up top [14:21] I am on KDE 4.x on this machine, and dolphin 4 has a special network item on the left there. cant remember how 5 is supposed to be [14:22] Anyone who is successfully running IRC client( xchat or any other) behind college proxy on Ubuntu 15.04? I am currently forced to use a web browser which is really annoying. [14:24] Ola [14:25] fakeabsi_, nope, maybe you can fix a client over port 80, but no irc service will support that. [14:27] l [14:27] ola [14:27] l [14:27] k [14:27] hello [14:28] Brasil ?: [14:28] !br | vinicius [14:28] vinicius: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br " sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigada. [14:31] Hello, i've just installed Ubuntu 15.2 and im newbie with Linux, how i can change my desktop from unity to KDE4? [14:31] Fridox, sudo apt install KDE. logout, choose KDE session, login [14:32] cfhowlett: just that? nothing more? [14:32] hey folks [14:32] Fridox, that will accomplish what you asked. you'll auto boot KDE until/unless you change it === newbie is now known as Guest15790 [14:33] KDE is 'just' an other desktop, switch it @ login [14:33] ~$ sudo apt-get install kde Reading package lists... Done Building dependency tree Reading state information... Done Package kde is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'kde' has no installation candidate [14:34] !info kubuntu-desktop [14:34] kubuntu-desktop (source: kubuntu-meta): Kubuntu Plasma Desktop/Netbook system. In component universe, is optional. Version 1.331 (wily), package size 3 kB, installed size 40 kB [14:35] just like 1 hour ago installed kubuntu-desktop and my linux crashed so had to make a clean install... [14:35] hateball: I got it from URL, putting in ftp://ip..... Thanks, really neat stuff on dolphin!! [14:36] is there a way to make ubuntu mate usb boot into live automatically, instead of the choice to install or go live? [14:37] jjj85 no, because every change is lost when you shutdown [14:37] jjj85, the only answer: install ubuntu on a 2nd usb, be sure that the grub bootloader is also installed on that usb, not on your current live session [14:38] I got a gig set a side for settings [14:38] jjj85: you'd have to make your own customized iso [14:38] so only a real install, with automatic login, is what you need [14:39] after installing kubuntu-desktop it asks sddm or lightsomething, which one i should select? [14:39] yeah, my buddy has a challenge at school, i'm not sure my idea is what he needs, but I'm trying to get it going, he has to change desktop background on a windows pc with no mouse or keyboard, so I was thinking a live ubuntu usb with a startup script to change it [14:40] lightdm is the default Fridox but if you want kde + ubuntu you are better served by installing kubuntu. [14:40] hi does anybody know if its possible to encrypt the full disk of ubuntu ? sort like veracrypt on windows [14:40] I'm not sure he gets network access to vnc into the machine or even knows the ip [14:41] possible yes. advisable, no. theptr === marshal0605 is now known as marshal0505 [14:41] full disc encryption is a choise during install. [14:41] i can't resolve host.company.local even though resolv.conf has "search company.local" - am i missing something? [14:42] cfhowlett, why is it not advisable ? [14:42] OerHeks, Yes i know but i didnt do that [14:42] So 15.10 was just released and I decided to sudo do-release-upgrade. But I got No release was found. Why? [14:42] !persistent [14:42] For information about installing Ubuntu from USB flash drives, see https://help.ubuntu.com/community/Installation/FromUSBStick - For a persistent live USB install, see: https://wiki.ubuntu.com/LiveUsbPendrivePersistent [14:42] theptr, my information is apparently dated. please ignore. [14:42] Yes I did sudo apt-get upgrade, update, and dist-upgrade [14:43] OerHeks, the problem is that i now use my own device in the corporation and encryption is a must [14:43] theptr, oke, then reinstall, there is no command to do encryption afterwards [14:43] Problem installing jquery-rails https://gist.github.com/skinuxgeek/5584fee6eb5b08d9a47 [14:43] It says I'm missing a package, but the package is installed [14:46] zacwalls, software and updates 3rd tab set it to all upgrades [14:46] wileee, what? [14:46] OerHeks, okay not happy with it but if thats the only solution than im going to do that [14:47] MarcoPau: dolphin is great :) if you want to do scp you can use fish://ip [14:47] zacwalls, Really, I answered your upgrade to 15.10 question. [14:47] wileee, ok one sec. I get it now. [14:47] zacwalls, Cool, I would watch the what's. ;) [14:47] hateball: don't know what that is... [14:48] dale yar hay [14:48] sry [14:49] wileee, just so you know, I don't see anything in the 3rd tab besides updates... [14:49] !scp | MarcoPau [14:49] MarcoPau: scp is a secure way of copying files across networks using !SSH. Usage: scp filename user@host:filename - WinSCP is a client for Windows, available at http://winscp.net/ [14:50] zacwalls, right and the bottom tab changes the upgrade call [14:50] MarcoPau: A more secure and better way to transfer files than FTP [14:50] wileee, so Notify me for any new version? [14:50] hateball: got it, thanks. Depends if the FTP is accepting that kind of connection I suppose, right? Do you know if I can set up ASCII or binary mode in dolphin? [14:50] zacwalls, Yes, and you can take that literally. [14:51] wileee, ok. So now I just wait? [14:51] such are you gaming end [14:51] MarcoPau: hmm, that is more than I know... [14:52] zacwalls, Run the update manager you should see the upgrade, if you are in 15.04 as of now. [14:52] hateball: that's ok, I'll google around and ask the provider, in case :-) [14:52] thaks again! [14:52] wileee, I am using 14.04 I think.... [14:53] thanks [14:53] zacwalls, Ah, your not a new user, you have to go one by up in upgrades, if not a longterm, 14.10 is eol, you would be better with a fresh install or just wait for 16.04 anothe ltl. [14:54] another* === ahmed is now known as Guest59143 [14:55] wileee, Oh great. Is there any way to skip up a release without a fresh install. I am sure there is. Because I am getting the prompt to install 15.04 :/ [14:56] Must be running 14.10 then [14:56] zacwalls, You have not followed, or really know thew upgrade process, consequently you are seeing that upgrade. There is no way to do this safely. [14:56] zacwalls what's the output of cat /etc/issue [14:56] after kubuntu-desktop download is completed i get like a windows saying "configuring sddm" and it makes me choose between lightdm and sddm, what i have to choose to have kde desktop? [14:57] wileee, Great. So, I will find a flashdrive or a blank disk somewhere and install from there. [14:57] Hello, I've installed an NFS server and set up my `/etc/exports` file as per the tutorial here: https://help.ubuntu.com/14.04/serverguide/network-file-system.html However, running `mount host:/path/to/share /mnt/path/to/share` hangs and eventually times out. The mountpoint exists and the client has `nfs-common` installed. Here is my exports file: http://paste.ubuntu.com/12990043/ [14:57] what gives? [14:57] Fridox: either should work, if in doubt keep lightdm [14:57] zacwalls, You might confirm the install your at for MonkeyDust [14:57] MonkeyDust, Ubuntu 14.04.3 LTS [14:57] cool [14:57] yeah :/ [14:58] thebwt: okay, proceeding [14:58] blz: ufw configured? [14:58] zacwalls, I have both OS installed, but always use 14.04, nothing all that different === mkumar is now known as mkumar_ [14:59] wileee, I just like some of the new features for the xfce desktop. Still can't find out how to install themes... === mkumar_ is now known as mkumar [14:59] zacwalls, Ah xfce, sure, we are just always concerned all goes well for you is all. ;) [15:00] wileee, thnaks [15:00] thanks* [15:00] i installed xfce and my volume up/down notifiactions disappeared in unity. any fix besides removing xfce? [15:02] how can i switch from nouveau to nvidia in ubuntu 15.10? it used to be a simple gui thingie but i can't find it anymore [15:02] spookly is emma [15:02] pbx, I doubt removing xfce will fix this, that is a meta package, just a heads up, might be part of animation look in unity-tweak or ccs [15:02] ccsm [15:02] musique: stop that [15:05] i can't resolve host.company.local even though resolv.conf has "search company.local" - am i missing something? [15:05] noregret: aren't domains under .local handle by avahi? [15:06] close [15:09] installing kubuntu deskktop, just before finish i get this Errors were encountered while processing: /var/cache/apt/archives/kde-config-telepathy-accounts_4%3a15.08.2-0ubuntu1_amd64.deb /var/cache/apt/archives/kaccounts-providers_4%3a15.08.2-0ubuntu1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) [15:09] thebwt, no. Default config (e.g. no config) [15:09] hello all [15:10] blz: I bet you're hitting the firewall [15:10] thebwt, how would I check? [15:10] mcphail: no idea actually [15:10] blz: disable it temporarily , 'sudo ufw disable', try again, then was confirmed that that fixed it, 'sudo ufw enable' [15:11] and look up the right ufw rules [15:11] once* [15:11] thebwt, the command isn't found, so I guess it's not installed [15:12] ufw isn' installed?! [15:12] thebwt, it seems not [15:12] thebwt, `which ufw` returns nothing [15:12] blz, what release is this? [15:13] which ufw [15:13] thebwt, 14.04 [15:13] /usr/sbin/ufw [15:13] OerHeks, again, ufw doesn't appear to be installed [15:14] did you replace the default firewall? [15:14] thebwt, no. [15:14] ufw is the default, so it not being there is a big deal [15:14] blz, that is odd, ufw is standard, but the gui is not [15:14] = gufw [15:15] OerHeks, thebwt this might have to do with the fact that it's kodibuntu. In any case ufw isn't really the issue -- I don't have a firewall so that can't be why nfs is failing [15:15] can the nfs server locally mount the share? [15:15] you should be using a vpn with kodibuntu, it tells you that in settings [15:15] How can I set Ubuntu 14.04's default ruby version to 2.0 for all users? [15:15] thebwt, that's a good idea, let me check === snowden is now known as Guest43079 [15:16] johnny_linux, what's wrong with ssh? [15:16] oh, ok gotchya [15:16] how cna i check which services are active on startup ? [15:17] Problem installing jquery-rails https://gist.github.com/skinuxgeek/5584fee6eb5b08d9a47/part [15:18] thebwt, when restarting the nfs server I get this message, for what it's worth: http://hastebin.com/ilalerajuz.txt [15:19] Just installed kubuntu desktop and after relog and choosing plasma appears the kde loadding and stucks in a black screen and with thr bmouse on screen [15:19] Any help pleas [15:19] blz: not sure [15:19] thebwt, hmm seems like the restart fixed my issue, actually ... [15:19] blz: nice! well glad it was that simple [15:20] thebwt, oh I see what the problem was. I didn't restart after a config change -__-. Wow. I should stay away from my computer today ... [15:20] :) [15:20] thebwt, thanks for rubber-ducking :)) [15:20] no sweat, just watching servers build :p [15:21] Fridox: may need to restart and install some more stuff. Which kde metapackage did you use? [15:22] Fridox: do you have intel gpu? [15:22] there is a bug in 15.10's plasma if you have intel gpu and vsync (on by default) where it will hang for a good while [15:23] How i can see the metapckg [15:32] for a full system backup that would make a recovery on a clean filesystem possible, what dirs would be a good idea to exclude from this root listing? [15:32] bin etc initrd.img.old lost+found opt run sys var boot home lib media proc sbin tmp vmlinuz dev initrd.img lib64 mnt root srv usr vmlinuz.old [15:35] How i can see the metapackage of the kde ? [15:35] dionysus69: usually you need /home and a package list [15:35] dionysus69, a good start http://askubuntu.com/questions/28477/what-is-safe-to-exclude-for-a-full-system-backup [15:35] dionysus69, for your /home/ http://askubuntu.com/questions/40992/what-files-and-directories-can-be-excluded-from-a-backup-of-the-home-directory [15:36] Generally speaking, don't need to backup dev proc and sys [15:36] getting a black screen after choosing KDE in the loging page, i've have a clean ubntu install, any help please? [15:36] and if I copy the rest to a fully clean ext4 partition the system will bootup if bootloader is configured properly? [15:40] hi all, any idea why such warning and error would happen in an ubuntu 15.04 container which is in an openstack VM ? Warn: Linux kernel reports no Time Stamp Counter (TSC). Floating point exception (core dumped) [15:41] how can I add the "connect to" link in nautilus to the unity launcher ? [15:42] hi, can i encrypt a disk without a security key i have to type upon each restart? i think of something like a usb startup key i have to plugin (like with bitlocker) [15:42] or like on osx with filevault where your user password unlocks the drive instead of a separate boot password [15:43] is_null: may want to ask in ubuntu-server, that's weird. [15:43] thanks thebwt [15:44] if I want to boot from a usb I just need to copy efi contents to it + / content, will that do ? [15:44] No. [15:48] bekks: what will I miss? [15:50] is there a way to keep an ssh session alive in a terminal? if I leave it inactive it'll disconnect after a bit [15:50] Need help: Intialted Upgrade from 15.04 to 15.10 using GUI. Locked computer (Super+L). now displays 'Authentication Error' -> 'Type of Message, 'sssssssb', does not match' . Join being at the login screen. Any advice? [15:51] Need help: Initialted Upgrade from 15.04 to 15.10 using GUI. Locked computer (Super+L). now displays 'Authentication Error' -> 'Type of Message, 'sssssssb', does not match' . Just by being at the login screen. Any advice? [15:52] nicomachus you can use 'screen' [15:53] MonkeyDust: cool stuff, thanks. [15:53] nicomachus with screen, you can even logout without losing the ssh connection [15:53] nicomachus, client or server side > http://linuxaria.com/howto/how-to-keep-ssh-connections-alive-on-linux [15:56] hi I have an XML file and I want to extract into a csv all the unique tags and attributes -- is there an application that can do this? [15:56] OerHeks: client side. [15:58] so if I have . . . [15:59] it would extract . . . farm_animals, pig, cat, @value, house_animals, dog, cat, @value [15:59] a cat is a house-animal .. and an expression [16:00] OerHeks, its a farm animal and house animal [16:00] and element [16:02] <`sys`> has anyone ever seen a virtual network interface persist after reboot, even after it has been removed from the interfaces file? [16:06] `sys`: this is just guessing but could it be saved in /etc/udev/rules.d ? === MonkeyDust_ is now known as MonkeyDust [16:23] Im getting this error while trying install kubuntu-desktop, can anyone say me how to fix it please? http://pastebin.com/vn6aQ3Kj === Jetbridge is now known as croberts [16:26] bug 1510590 [16:26] bug 1510590 in ktp-accounts-kcm (Ubuntu) "package kde-config-telepathy-accounts 4:15.08.2-0ubuntu1 failed to install/upgrade: trying to overwrite '/usr/share/accounts/services/google-im.service', which is also in package account-plugin-google 0.12+15.10.20150723-0ubuntu1" [Undecided,New] https://launchpad.net/bugs/1510590 [16:26] Fridox, there is this bugreport, and removed due to duplicates .. cannot find duplicate report sofar .. === marshal0505 is now known as marsh [16:27] and how i can use the apt-get install again? [16:28] due this bug it don't let me use it anymore === marsh is now known as marshal0505 [16:28] I am trying to setup debreate on Ubuntu 14.04. I tried running python launch.py but it threw error http://pastebin.com/h4x51Q3B [16:29] hey [16:29] I ran it on both command line and graphical but the same error [16:29] I tried supplying export DISPLAY=:.0 but it didnt work [16:30] someone help me with ubuntu partition for a windows dual boot [16:30] Fridox, in comment #5 ubuntu ships that package, now KDE does it too .. https://bugs.launchpad.net/ubuntu/+source/ktp-accounts-kcm/+bug/1493003 [16:31] Launchpad bug 1493003 in ktp-accounts-kcm (Ubuntu) "15:10: /usr/share/accounts/services/google-im.service provided by two packages, causing upgrade failure" [High,Triaged] [16:31] django_, give an outline of where your at for help. [16:31] hi. [16:31] Fridox, wait for a fix, or remove that plugin yourself? anyway, please confirm that bugreport, might speed up things [16:32] Yes i sent a bugreport too [16:35] decci: go back to your normal user account and try running sudo python launch.py [16:35] akik: Ok let me try [16:35] I have problem with installing two systems on btrfs partitions. os-prober not detect second ubuntu. [16:36] how to fix it ? [16:36] decci: you've changed the xorg auth scheme. although in kubuntu going to root is still able to open x apps [16:37] uwily: I think the prober only picks up operating systems on the default btrfs subvolume. No idea how to change that, personally [16:37] akik: I will need GUI to open that riht [16:38] decci: that's what your error msg says :) [16:38] mcphail: ok then. [16:38] uwily: you can try marking the subvolume as default and see if it gets picked up [16:42] exit [16:43] jhjh [16:43] akik: Wow..it worked.. [16:44] akik: I usually use putty. Is it possible to open up this application under putty [16:44] akik: Since I am using VM its slow to showcase this app to my colleague everytime logging to ESXi and openning up [16:45] Hi, as root i did the change as in http://paste.linux.chat/view/8372165c . i rebooted the machine but still the soft limit is 1024. why? it should be 4096 [16:48] decci: yes, you need a windows x window server like xming [16:49] decci: then when you open the ssh connection in putty, enable the x11 forwarding to your windows desktop xming display :0 [16:49] akik: Does xming gets installed on WIndows machine [16:49] decci: yes [16:49] akik: ok [16:50] akik: I wish I could open this app simply on browser [16:50] akik: debreate [16:50] As root i did the change as in http://paste.linux.chat/view/8372165c . i rebooted the machine but still the soft limit is 1024. why? it should be 4096. Any ideas? [16:59] anyone here [17:00] django_: nope :) [17:01] k1l_: trying to install buntu [17:01] ubuntu [17:01] i tried a coule of months ago and failedd [17:01] i wanna do it correctly it now [17:01] https://usercontent.irccloud-cdn.com/file/DmKKNyai/ [17:01] that is the partition [17:01] is it correct? [17:03] django_: was that a "wubi" install? [17:03] usb [17:03] django_: i wonder why the ubuntu install is ntfs. ubuntu cant work on ntfs it needs a ext4 partition for the system [17:04] :o [17:04] that 120.88 partition, leave it without filesystem, let ubuntu partition the free space [17:05] so, ubuntu 15.10 makes my 4k monitor flicker and have artifacts :( [17:05] with display port [17:05] HDMI works though [17:05] but that's only 30 hz= [17:05] :( [17:05] django_: you don't need to setup the partitions manually, if you have partition space not used by Windows already [17:05] django_: you can just point Ubuntu's installer to that unpartitioned space [17:05] django_: what did you do already? can you describe that shortly? [17:05] artois: the 120.88? [17:06] django_: another very sane alternative is to buy another hard disk; it makes dual boots far less complicated, and you're going to need the additional storage some day anyway [17:06] meh [17:06] id rather dual boot [17:06] and by 'another hard disk', a cheap usb stick can count [17:06] it would be dual booting [17:06] only with more than one disk [17:06] it simplifies partitioning, a lot [17:07] really [17:07] and boot loader juggling [17:07] hugely simplifies [17:07] will it be fast though [17:07] ill be using it for development [17:07] yup, probably even trivially faster [17:07] or did you mean a usb stick? [17:07] it will use my computers ram? [17:07] also probably faster, yes [17:07] the usb stick..yeha [17:07] usb sticks are solid state; the cheap ones are cheap, but solid state is solid state [17:07] no spinning to get to data [17:07] meh id rather try dual boot [17:07] django_: dualboot is still possible, i am just unsure what your actual setup is. [17:07] yeah, any storage is storage, to GNU/Linux [17:07] i was able to do it on my old laptop [17:08] doesn't matter if it's a usb stick [17:08] k1l_: windows acer laptop [17:08] well, you're confusing two things [17:08] django_: so did you already install it? [17:08] k1l_: ubuntu? no [17:08] having more than one storage device and dual booting are separate things [17:08] django_: or did you just make a partition and name it ubuntu? [17:08] the former merely makes the latter far simpler, is all [17:08] k1l_: made a partition named it ubuntu [17:08] Can someone type my name in Chat? Sorry, I'm testing something. [17:09] django_: ok. so now boot up the live-usb with ubuntu. then you can point the installer to install into that partition and make it ext4 === kpease_ is now known as kpease === Trystam is now known as Tristam [17:10] k1l_: how do i make it ext4? [17:10] TypeSquid: <- booya [17:12] artois: You dah man [17:14] no, you dah === bro is now known as Guest84389 [17:15] django_: the ubuntu installer initializes the partition as ext4 === kpease is now known as kpease_ === kpease_ is now known as kpease === root is now known as Guest85013 [17:20] Can someone find some links i posted yesterday evenign at UTC+1 22:00 as the user "Ripdd"? It were some paste.ubuntu links [17:21] Hey guys I'm at setup for ubuntu [17:21] i chose ext4 journaling file system [17:21] ok [17:21] what do I chose for mount point [17:21] depends what you want it to be ? [17:21] Django123: for the systempartition "/" [17:22] i hit ok nothing happens [17:22] !logs | Ripmind [17:22] Ripmind: Official channel logs can be found at http://irclogs.ubuntu.com/ . LoCo channels are now logged there too. [17:22] uh nice :3 [17:22] Ripdd: http://pastebin.com/raw.php?i=kNVNgG8k [17:22] do I check format the partitokn? [17:22] partition [17:22] Django123: why are you not using the guided method ? [17:22] Django123: yes. [17:22] akik thanks a lot, may i ask how you got that so far? some epic shell command? :D [17:23] fuck I hit ok. And nothing happens [17:23] Ripmind: i just /last -regexp ripdd.*http [17:23] nice :D [17:23] no swearing Django123 [17:23] :/ [17:23] Ripmind: irssi client [17:24] Django123: can you make a screenshot and load it to imgur? [17:24] I am using mIRC and a bnc.. But my bnc was not set up to log files [17:24] hot cacel nothing happens [17:24] hrrrr mirc on windows [17:24] hit cancel [17:24] Django123: first did you check the iso ? [17:24] Django123: we dont see what you see [17:24] its in the Ubuntu install gui [17:25] hrrr comic chat [17:25] I'm looking for an app launcher much like spotlight is for mac osx, anyone has any recommendations? [17:25] Errrrr work damn it [17:26] lol [17:28] chotaz`w, synapse and kupfer are my favorites. they are not "like spotlight" in that they do not do search, but they are good launchers a la quicksilver or launchbar [17:29] chotaz`w: http://www.omgubuntu.co.uk/2013/09/spotlight-like-tool-coming-to-pear-os-other-distros [17:29] pbx, I'm seeing synapse also has file search capabilities. [17:30] thanks for the suggestion guys, i'll take a peak [17:30] chotaz`w, not like spotlight [17:30] Ok [17:31] you have not selected partitions for use of swap space [17:31] should I hit continue? [17:31] Django123: if you dont want a swap space then yes [17:31] Django123: otherwise go make one [17:31] idk what that is [17:31] Django123: how much ram you got? [17:31] 6gb [17:31] Django123: do you want to use hibernation? [17:31] whats hiberrtnation [17:32] Django123: why are you not using the guided install if you dont understand the basics? [17:32] suspend2disk [17:32] mjayk they suck [17:32] Django123: did you backup your data? [17:32] akik yeah [17:32] Django123: most users with more than 4 GB ram and who dont want to hibernate are fine without swap [17:33] Django123: so will your messed up configuration, which will be messed up because you dont understand. Read before you do things :). [17:40] iirc a swap partition, even a small one, is recommended to have in any case [17:42] Free space, swap area , + button , 2048mb. Swap area logical [17:43] I get unable to satisfy constraint [17:43] what you said isn't easy to parse, man [17:43] English? [17:44] lol typing on phone [17:44] http://youtu.be/hOz66FC0pWU [17:44] followjng that [17:45] I go to free space and they click on the plus button [17:45] and? [17:46] you make the size 2048 type of new partition logical use as swap areahate OK error unable to satisfy all constraints on the partition [17:46] Django12345: you can launch the live session when booting the usb. there you have the installer again to start and can start a irc client or browser [17:46] I have an Ubuntu installation here which appears to not run init.d at startup. What may cause this? insserv and upstart packages are installed [17:50] ? [17:50] Hi guys... i need help find /proc/bus/usb [17:50] usbfs [17:50] TheKid: it died a long time ago :) [17:50] what's the channel for diagnosing advanced ubuntu issues? [17:50] Wulong: what ubuntu install exactly? [17:50] iirc it's not this channel [17:51] TJ-: okay, so, how to configure virtualbox USB [17:51] ? [17:51] TheKid: its this channel. [17:51] !details | tsukasa_ [17:51] tsukasa_: Please elaborate; your question or issue may not seem clear or detailed enough for people to help you. Please give more detailed information, errors, steps, and possibly configuration files (use the !pastebin to avoid flooding the channel) [17:51] k1l_: 12.04 upgraded to 14.04.3, but it has worked for a while until I just now did some apt-get update/upgrade stuff. [17:51] So it works quite a bit better in unity, but in i3 the monitor still freaks out unless I drop the resolution [17:52] TheKid: see https://help.ubuntu.com/community/VirtualBox/USB [17:52] TJ-: I am using 14.04.4 install VirtualBox 5.0.8, and usb support no go! [17:52] Wulong: ah ok, so its not a systemd issue which is standard since 15.04 [17:52] TJ-: I can't see any usb device... [17:53] TJ-: ill try, be back bro [17:53] k1l_: but I see there are some systemd packages in this system. [17:53] k1l_: i have vagrant -> puppet setting up an ubuntu 14.04 instance and recently (last 1-3 days) the automatic mysql start is throwing an error (looks related to it looking for $HOME env variable which is not set, mysql start works fine if i ssh into the server) [17:54] Wulong: yes. because prior 15.04 there were some porgrams already systemd-only so the needed to be ported to work with upstart since the old programs were deprecated [17:56] k1l_: ok, scratching my head over here. Nontrivial to get something on google as well. [17:57] k1l_: i'm trying to figure out if the mysql package has been updated recently and what exactly changed about it [17:57] Wulong: anything in the /var/log/boot.log or /var/log/syslog that gives clues? [17:57] anyone having problems with qt apps on 15.10? [17:57] Hello, just did a clean kubutu installation and when iI put my pass it appears a blackscreen and my mouse, when i press alt and f2 appears the command bar, anyhelp please? [17:58] Do you know any other better place than #thunderbird to ask a question about thunderbrid? (I am getting segmentation fault (core dumped) in ubuntu 14.04 LTS) does anybody know how to fix this issue? [17:58] or clue how to fix it, thought it was skype only, but ktorrent gui is also br0ken [17:58] ztane: skype works fine on my machine [17:58] tsukasa_: is it mysql-server5.5 ? [17:59] ztane: what is the actual problem [17:59] TJ-: no, not really. syslog says nothing related to this and boot.log is empty. This is a VPS. [17:59] TJ-: 5.6, see http://paste.pound-python.org/show/SBk7YQWRrQAH7NaRJikD/ [18:00] mcphail: **all** qt guis are broken, getting QNativeImage: Unable to attach to shared memory segment. [18:00] tsukasa_: So, the packages from universe then? http://changelogs.ubuntu.com/changelogs/pool/universe/m/mysql-5.6/mysql-5.6_5.6.27-0ubuntu0.14.04.1/changelog [18:01] ztane: I haven't had any problems. Was this a fresh install or an upgrade? Do you have any PPAs installed? [18:01] upgrade [18:01] shouldn't have any *relevant* PPA. [18:01] http://paste.ubuntu.com/12987820/ - I can no longer start,stop,restart rsyslog, regardless of reinstallation. I keep getting "Errors were encountered while processing" at installation and "action "start" failed." when booting it up. [18:02] I hope someone can help out. [18:02] TJ-: looks correct, but that changelog doesn't explain why i'm now having a problem. the date of the commit seems to match up though [18:02] ztane: I've been running skype on a fresh install and an upgrade from vivid, with no problems [18:02] Any clue please? [18:02] Wulong: is the "/etc/init/rc-sysinit.conf" job disabled? [18:02] ztane: I suspect you will have some old qt configuration crud somewhere [18:02] no, this is not a skype problem but a qt problem, dunno what causes it though... [18:02] me too... [18:03] Abrileo: version of kubuntu please? [18:03] I got ktorrent actually working by doign QT_GRAPHICSSYSTEM=foobar ktorrent [18:03] it says Unable to load graphicssystem "foobar" [18:03] 15,2 if im notwrong f [18:03] and works :P [18:04] Abrileo, Go to the tty and run an apt-get update dist-upgrade name the graphics if this does not fix. [18:04] ztane: you could temporarily rename your ~/.local and ~/.config directories to see if it improves matters [18:04] tsukasa_: Can you add a comment to bug 1508441 saying there may be a regression, and giving the output of "pt-cache policy mysql-server--5.6", and explaining it [18:04] bug 1508441 in mysql-5.6 (Ubuntu Wily) "mysql 5.5.46, 5.6.27 security update tracking bug" [Medium,Fix released] https://launchpad.net/bugs/1508441 [18:04] hi...repositiry moiiror for my country is not working . what to do..? [18:05] me-1: what ubuntu exactly and what country? [18:05] me-1, change to another, what release is this? [18:05] Wileee okay gonna test [18:05] its 15.4 and country is Pakistan [18:05] hmm it is "raster" gfxsystem which causes the problems... [18:06] me-1: try the main mirrors [18:06] tsukasa_: I've asked the security team to look at the bug report once you've added a comment [18:06] and something sets it by default... [18:06] Do you know any other better place than #thunderbird to ask a question about thunderbrid? (I am getting segmentation fault (core dumped) in ubuntu 14.04 LTS) does anybody know how to fix this issue? [18:06] hi, what does sudo -s really do? [18:06] Twirl: start a root shell [18:07] k1l_: awesome, ty [18:07] TJ-: its present, yes. I should add that one moment during my recent update that "upstart" and "udev" were missing, but both are in place now. [18:07] k1l_, how can i choose fastets ..? main are located in USA thus not so fast [18:07] me-1: the system settings -> software and updates should offer a test. [18:07] Wulong: might be worth checking that something wasn't removed unexpectedly? /var/log/apt/ [18:07] me-1 the mirror tool in sources gives good results. [18:08] Please help [18:09] k1l_, but it suggests non working mirrors . and how do I reposrt broken mirror ..? [18:09] !ask | mojtaba [18:09] mojtaba: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [18:09] baizon: Do you know any other better place than #thunderbird to ask a question about thunderbrid? (I am getting segmentation fault (core dumped) in ubuntu 14.04 LTS) does anybody know how to fix this issue? [18:09] mojtaba: did you try deleting settings? [18:10] mojtaba: also sometimes running it from terminal may give additional info [18:10] mojtaba: try starting it under control of the debugger: "/usr/bin/thunderbird -g" [18:10] omgitsmit: I am running it from terminal, it gives segmentation fault. (core dump) [18:10] TJ-: done https://bugs.launchpad.net/ubuntu/+source/mysql-5.6/+bug/1508441?comments=all [18:10] Launchpad bug 1508441 in mysql-5.6 (Ubuntu Wily) "mysql 5.5.46, 5.6.27 security update tracking bug" [Medium,Fix released] [18:10] me-1, servers update, you can error during these times, no need to report [18:10] baizon: where is setting [18:10] tsukasa_: great, I'll make sure the security team look at it [18:11] tsukasa_: they'll likely ask for more info/logs at some point [18:11] TJ-: ok, thanks [18:11] TJ-: ok, thanks [18:11] Wileee fixed thanks you mate [18:11] mojtaba: default should be ~/.thunderbird irrc [18:11] Abrileo, Cool, enjoy. [18:12] omgitsmit: Why should I delete it? [18:12] mojtaba: i would rename it instead of deleting it... [18:12] wileee, No this server is not working for last 2 years (IMO) [18:12] mojtaba: https://answers.launchpad.net/ubuntu/+question/228756 [18:13] me-1: #ubuntu-mirrors i think [18:13] me-1: please /join #ubuntu-mirrors and report it [18:13] too late k1l_ ! [18:14] me-1, there are servers all over the world, the closest or fastest ping are not necessarily faster, use one that you're happy with [18:17] k1l_: strange, launchpad tests say that mirror is functional, and I can access it too. I wonder if there is some internal country/ISP/company block affecting me-1 [18:18] or behind a proxy himself ? [18:18] no definition of not working and not for years, err really === ich is now known as Guest61824 [18:21] TJ-: my human eyes can't find anything. If I only knew the startup chain I could debug it better. [18:22] Wulong: The basics are: kernel > /sbin/init (part of Upstart) > services defined in /etc/init/ (Upstart jobs) /etc/init/rc-sysinit.conf which then processes the jobs in /etc/init.d/ as per the links in /etc/rc${RUNLEVEL}.d/ [18:22] hi, I use x11vnc with Xvfb to work with a remotely running program, but the menu's, toolbars and scrollbars do not show, see http://snag.gy/LWfh5.jpg [18:23] TJ-: yeah sounds like a country/isp/routing issue [18:23] they do show when I start the program over ssh (with -X parameter), and display it on the local computer with xming, please see: http://snag.gy/5xr6M.jpg [18:24] Do you have a window manager running in xvfb? [18:24] also, it looks like x11vnc + Xvfb cut off the right part of the screen [18:24] Wulong: After the system has started have any jobs linked under /etc/rc2.d/ started? If not, try manually doing "sudo service rc-sysinit start" [18:25] I think not LeSaucy, is that the problem? [18:25] I think that's what usually draws them. Try metacity or flux box ? [18:25] lepel101: no window controls -> no window manager [18:26] TJ-: rc-sysinit stop/waiting, but still apache was not started. Its in there. [18:26] missing local libs perhaps to provide one [18:26] aha ok, thanks [18:26] can you guys recomment anything as lightweight as possible? I'm trying to minimize latency [18:27] Wulong: is apache2 the only link in /etc/rc2.d/ - if not, are any of the other jobs running? [18:27] hello guys ... i need to make an iso file from my own laptop's os to install that on other pc and laptops by a cd or flash memory ... how can i do this? [18:27] anything -> window manager === sorinello_ is now known as sorinello [18:27] Fluxbox is very light weight. Metacity not so much since it uses gtk2 [18:28] lepel101: i take it the program is only licensed to a university you're at, or something? [18:28] because remotely using GUI programs is the mistake i see [18:28] thanks will try fluxbox [18:28] daftykins I am running the program (a theorem prover) on a "super computer" [18:29] working on a large proof, too large for my laptop at the moment [18:29] whats the difference between running 'reboot' and 'shutdown -r now' [18:29] ok, bit shocked it's graphical :) [18:29] dna113p: none. [18:29] it's an interactive theorem prover [18:29] TJ-: it did work [18:30] Anyone have any problems changing their monitor resolution? After a reboot, my resolution goes back to its native resolution. This is for Ubuntu 15.10, Xubuntu 15.10 and Lubuntu 15.10 [18:30] some rule applications require "creativity" if the automated strategies of the theorem prover cannot find a proof of a certain subproperty... those interactive steps are applied with the gui [18:31] TJ-: so its seems /etc/init is not being run? [18:31] a text based solution for the interactive steps would probably be even more cumbersome... anyway thanks a lot both of you, I am checking out fluxbox as we speak [18:31] dunno if this is the right place, anyone knows how to grep only certain file extensionS? [18:32] Twirl: grep "mystring" *myextension [18:32] Wulong: There are lots of Upstart jobs in /etc/init/ without which the system would be barely usable, so I think the issue is specific to the rc-sysinit job. [18:32] Twirl: grep "mystring" *.myextension [18:33] sui: doesnt work with fgrep [18:33] dna113p: depending on Release, reboot and shutdown are sym-links to 'systemctl reboot/poweroff ' respectively [18:33] hi guys [18:33] hello [18:33] can I have a question about pulseaudio ? [18:33] sure [18:33] http://paste.ubuntu.com/12987820/ - I can no longer start,stop,restart rsyslog, regardless of reinstallation. I keep getting "Errors were encountered while processing" at installation and "action "start" failed." when booting it up. [18:33] i have a script (sh /home/david/bin/get-shit-done/get-shit-done work) ... that blocks non productive websites i tend to visit so I can focus on my work. i'd like to run it at the beginning of my workday automatically. i have it set up as a crontask, but because i suspend my laptop obviously crontasks arent getting run. anacron looks interesting but it runs the task only once per day. suggestions? [18:33] I am tryin to setup a 2.1 sound system under ubuntu, [18:34] jkhgjkghjg [18:34] and the subwoofer out is a simple channel (full), and I would like to low-pass it (LFE) [18:35] I found some settings in /etc/pulse/{default,daemon}.pa [18:36] /etc/pulse/daemonpa: "enable-lfe-remixing = yes" [18:37] changed the default no to yes, but nothing changed [18:37] Hey all -- looking for some help with the find command, since I don't think I'm using it quite right. [18:37] Qareen: what's the problem? [18:38] I've got a really huge directory full of files, and I need to delete all files with a particular string in their name while preserving the rest. My plan was to use find to print a list of files then feed that list to rm. [18:39] Qareen: "find /path/to/dir -name 'matching-string*' -delete" [18:39] find has it's own delete method, no need to eed [18:39] ^ [18:39] Qareen: find /path -type f -iname "*caseinsensitivestring*" -exec echo rm '{}' \; [18:39] lemme see if that works [18:39] Qareen: after you test it, remove the echo from the command [18:39] Cyb3rn3t: pulse audio reads it's config from a number of different places depending on how it's run and who runs it [18:39] Qareen: test without '-delete' to ensure it prints only the files you want deleting, of course [18:40] Hello, I have a laptop and i've just instaleld Kubuntu, but my laptop have physical leds (for battery, for caps,bluettoth,wifi etc..) but they don't work, any help please? [18:40] yeah no results -- the string I'm looking for contains [brackets], is that a problem? [18:40] Qareen: show us the line you're using? [18:40] LeSaucy, daftykins: fluxbox works like a charm, thanks a lot for the help to both of you! [18:40] I'm assuming it is since those sorts of characters have come up in tutorials I've looked at [18:41] one moment [18:42] find ~/Documents/Other -iname '[old]' [18:43] Qareen: you need a glob match either side most likely: "find ~/Documents/Other -iname '*[old]*' " [18:43] One moment [18:43] Ugh.. really, no one knows? [18:44] Skydiver: you can also try using pacmd to live change/inspect your pulseaudio setup [18:44] Skyrider: "Not replacing deleted config file /etc/rsyslog.d/50-default.conf" [18:44] i have some arm boards ... windows was default os on that ... but i removed this and i love to install linux on it . i need an iso file to install my own os on that ( i configured ubuntu ) . [18:44] thats it? the config file is in the way? :p [18:44] I'd like a global filter on it [18:45] TJ: It returns results now, but it's returning literally everything in the folder lol [18:45] or at least it looks that way, there's more files in the folder than the command line can display at once [18:46] but it's returning more than just [old]s [18:46] Skyrider: "sudo dpkg --force-confmiss --configure rsylog" [18:46] Qareen: find -type f -name '*\[old\]' [18:47] Qareen: find -type f -name '*\[old\]*' [18:47] EricC^^: One moment. [18:47] Qareen: give us an example of a filename that needs to be matched [18:47] dpkg: warning: there's no installed package matching rsylog [18:47] I see [18:47] s missing [18:47] same error [18:47] I mean, as the log I provided. [18:48] Skyrider: you deleted the conf-file; an install sees the package is in the 'rc' state and therefore does NOT replace missing config files, which causes the service not to work [18:48] I have done apt-get install asterisk-core-sounds-en-wav but still there are no sound files in /var/lib/asterisk/sounds. Any clues? [18:49] TJ-: Something like "Presentation Research [old]" needs to be hit, but "Presentation Research" shouldn't be [18:49] i have some arm boards ... windows was default os on that ... but i removed this and i love to install linux on it . i need an iso file to install my own os on that ( i configured ubuntu ) . [18:50] omilun: on arm hardware that depends heavily on the exact used hwardware. ask in #ubuntu-arm since its different from a pc install [18:51] Qareen: as EriC^^ suggested you need to 'escape' the square brackets so they aren't interpretted by the shell. This works: "find . -maxdepth 1 -name '*\[old\]' [18:51] ./Presentation Research [old [18:51] k1l_: i need an app to make a iso file to install it on my boards [18:51] TJ- I am honestly still lost. When I remove / purge rsyslog, the config files are removed. I re-installed rsyslog and getting: Creating config file /etc/rsyslog.d/50-default.conf with new version [18:52] Thats it.. the rest of the errors are exactly the same. [18:52] Skyrider: Hmmm, hang on then, maybe there's more than 1 bug to fix? [18:52] no success :/ [18:52] When I purge rsys however.. [18:53] I do get the msg: dpkg: warning: while removing rsyslog, directory '/etc/apparmor.d/local' not empty so not removed. [18:53] not sure if matters [18:53] Skyrider: that should be fine; lots of packages install files there [18:53] Hello! I can't get bumblebee to work. I'm getting "Cannot access secondary GPU - error: Could not load GPU driver" on Ubuntu 15.10 [18:54] Can someone help me, please? [18:54] hmmmmm. this isn't working, but I've gotta get moving. I may be back later if I can't figure something out [18:54] TJ- thanks for your help [18:55] EriC^^ you too [18:55] Is there an Ubuntu dev channel on Rizon? [18:55] Skyrider: can you try "sudo sh -x /etc/init.d/rsyslog start" [18:56] XV8: ubuntu communities chat is here on freenode [18:57] which vpn is good [18:57] openswamp or openvpn [18:58] Skyrider: you're using 12.04 ? === ^cj^ is now known as ^CJ^ === ^CJ^ is now known as ^cj^ === matthew is now known as Guest71036 [18:59] openswamp or openvpn which is best [18:59] Ubuntu 15.04 is caching an SD Card. Is there a way to prevent this from happen? [19:00] openswan [19:00] ? === user is now known as Guest3151 === marshal0605 is now known as marshal0505 [19:01] is openswan that way [19:01] a computer [19:01] program [19:01] openvpn is easier to set up [19:02] Hey, can someone help me with bumblebee on Ubuntu 15.10? Googled solutions didn't work. http://paste.ubuntu.com/12992121/ === cemason is now known as cemmason [19:03] ghost_: it's been deprecated for years, you had no luck with nvidia-prime? that's the new optimus solution. [19:03] ghost_: dont use bumblebee. [19:03] daftykins: And it's still on wiki? God, thank you [19:04] daftykins, the God of #ubuntu :) [19:04] * daftykins bows [19:04] daftykins: Do I have to revert something now? Or just install nvidia-prime? [19:04] TJ- : yes [19:04] Ubuntu 12.04.5 LTS [19:05] ghost_: sudo apt-get purge bumble* [19:05] Skyrider: unfortunately my remaining 12.04 hosts use sysklogd [19:05] daftykins: Thank you a lot man [19:06] unfortunately? [19:07] ah, 2 different packages? [19:07] Skyrider: I can't try to replicate it [19:07] ah well, I appreciate the responds. [19:08] Skyrider: did you see my suggestion about [19:08] Skyrider: can you try "sudo sh -x /etc/init.d/rsyslog start" [19:09] TJ- I see tons of info, ending with: start: Job failed to start [19:10] Skyrider: could you pastebin? [19:12] TJ-: http://paste.ubuntu.com/12992205/ === Guest7778 is now known as ZeeNoodleyGamer === ZeeNoodleyGamer is now known as Iota-Spencer [19:15] Aha! It's trying to start the job using Upstart's job file, it looks like: "start rsyslog" at then end. So, try "sudo initctl start rsylog" - you'll will likely still get the "Job failed to start" but at least we are looking at the correct job definition [19:16] initctl: Job failed to start [19:16] yup [19:16] Skyrider: OK, so lets' try and get that to debug itself :) [19:16] hi all [19:17] how do I do that http://packages.ubuntu.com/en/trusty/amd64/libsdl2-ttf-dev/download ? [19:17] I have ebook reader which can read mobi file. I found it is slow. is there any better one? [19:17] Skyrider: "sudo initctl log-priority debug" then "sudo initctl start rsyslog" [19:17] eink has a slow refresh [19:18] so epaper/eink readers are necessarily a bit slow [19:18] linocisco: there are a lot of websites which list recommended programs now, such as alternativeto.net [19:18] linocisco: Calibre? [19:19] oh wrong channel, heh we're talking ebooks in another channel too :) [19:21] ghost_, thanks. Loading flow is the same speed like mine [19:22] daftykins, ghost_ I am looking for great software which can convert my mobi book to pdf [19:22] daftykins, ghost_ I tried online converters but fonts and appearance changed from original mobi [19:22] Calibre is the usual tool [19:22] linocisco: you dont want pdf on a ebook. that will be way to small and doesnt brake the lines properly etc. [19:23] sorry no experience with that. [19:23] i just bought a big stack of 19 dead-tree format books :P [19:23] i'm tring to figure out using sed and diff to compair vivd and wily repos for changes. surly someone has done this already [19:23] TJ-: same error msg. [19:23] Nothing was debugged. [19:24] Skyrider: that's annoying. OK, time to read the job script and figure it out! [19:25] guys https://help.ubuntu.com/lts/serverguide/sssd-ad.html here at /etc/hosts what is myserve? [19:25] linocisco: Have you tried pandoc? I'm not sure if it supports MOBI though [19:25] zerothis1: why? [19:25] myserver* [19:25] Skyrider: can you pastebinit /etc/default/rsyslog [19:26] bviktor: the DC... [19:26] so i should add 2 lines if i have 2 [19:26] TJ- I'll be back later, wife is a bit, mad atm.. sorry.. I really appreciate the help thus far. [19:26] as for the pastbin [19:27] http://paste.ubuntu.com/12992345/ [19:27] ghost_, not yet [19:27] i'm not sure for the purpose though, dns should resolve them anyway, right? [19:27] I'll check out the notified messages you'll send me when I get back, thanks! [19:27] linocisco: You should then, it's awesome [19:27] linocisco: I gtg, good luck [19:27] anyone else having issues with the system tray icons not loading, or the wifi not fully connecting even though the connection is good? [19:28] to see newly added games. basically, get the html lists of game from the websites, remove "wily", "vivid", version info including (numbers and "-" and "-build") diff the files and see new lines (new games, and also package changes to manually sort out) [19:29] What is the password for the Ubuntu installer (so I can drop to the console during install)? [19:29] Skyrider: check that this file matches: "md5sum /etc/apparmor.d/usr.sbin.rsyslogd" ==> "b19cc6250081ef3700146db17f1efa44 /etc/apparmor.d/usr.sbin.rsyslogd" so we know I'm testing an identical config. "/etc/default/rsyslog" is identical to the 1 I have. [19:29] Suudy: there isn't one [19:29] Suudy: as in, it is blank [19:30] Suudy: there isn't one. [19:30] oops didn't see TJ- answered ;) [19:31] hello, I can't seem to change the permissions of files that are symlinked elsewhere (it is the original file) [19:31] Ok. I thought perhaps Lubuntu and Ubuntu used the same installer. The Lubuntu one apparently has a username/password requirement. [19:31] I know symlinks can't have permissions but surely the source files can, right? [19:31] sentriz: are they on a non-POSIX file system? [19:32] hey anyone to help me with http://pastebin.com/bcPnpu4E ? [19:32] SubMind: I would expect the password to the same as the default username in that case [19:32] SubMind: you're missing a header file, contact the author. [19:33] daftykins: I know symlinks can't have permissions but surely the source files can, right? [19:33] daftykins: sorry! [19:33] SubMind: is there a reason you're compiling neverball from source instead of installing from the repos? [19:33] daftykins: NTFS [19:33] Ok. Turns out that (duh!) 'lubuntu' is the login. [19:33] sentriz: yeah that's your problem then. === haskell is now known as Guest64457 [19:33] daftykins: how can all the other files on this fs have permissions? [19:33] because they're not symlinked? [19:34] sentriz: they gain some at mount time, but they cannot be changed [19:34] SubMind: ok, i am trying to help one last time: why dont you install the ubuntu neverball and use that? [19:34] daftykins: thanks! [19:34] "The installation of krb5-user will prompt for the realm name (in ALL UPPERCASE), the kdc server (i.e. domain controller) and admin server (also the domain controller in this example.)" too bad it didn't. how can i force re-runing the post-install script of a package? [19:34] Pici: when I do from the repo its not working so I try to find out why ? [19:34] SubMind: please define "not working" [19:34] bviktor: sudo dpkg-reconfigure ? [19:34] already tried, no joy [19:34] purge and reinstall? === nerd is now known as madnerd [19:35] SubMind: open a terminal, type "neverball" in it. hit enter. see what errors are reported there. put that into a pastebin and link the pastebin here [19:35] unless it wasn't actually that specific package as the article claims... [19:35] maybe one of its dependencies [19:35] purge+install didn't trigger it either [19:36] bviktor: maybe the package has changed since that article was written? does it give a version indication? [19:36] does what give ? [19:36] the article? nope [19:36] ok, i took a wild guess [19:36] it was krb5-config [19:36] SubMind: people in here tried to help you all day so far but without the errors why the ubuntu neverball isnt working, we cant help you. [19:36] how can i convert a swf file to ogv? [19:39] k1l_: Pici daftykins http://pastebin.com/9CRNxW7B [19:39] what is this [19:39] why hassle 3 of us? [19:39] SubMind: how did you install this? [19:40] daftykins: sorry [19:41] SubMind: can you show a "apt-cache policy neverball" and show the result in a pastebin? [19:41] SubMind: you've been told what to do, use a repo version - so do it. [19:42] old known issue with that packager, install ttf-dejavu-core http://ubuntuforums.org/showthread.php?t=2221152 [19:42] k1l_: http://pastebin.com/1EN9XcFE [19:43] OerHeks: thx [19:43] one of the reasons why you should rely on the ubuntu version, though 1.6.0 is not in trusty [19:44] OerHeks: thanks [19:44] yes, the ttf package is missing. should be a depency tho [19:44] hi everyone [19:44] i have this problem in ubuntu 14.04 [19:44] Starting the VirtualBox Guest Additions ...fail!(modprobe vboxguest failed) [19:45] Iresf: install build-essential and virtualbox-dkms then re-run the setup script [19:48] https://bugs.launchpad.net/ubuntu/+source/neverball/+bug/1471399 is the bug for neverball that SubMind was triggering [19:48] Launchpad bug 1471399 in neverball (Ubuntu) "Missing font dependancy" [Undecided,New] === madnerd is now known as nerd [19:49] >libwebp-dev : Depends: libwebp5 (= 0.4.0-4) but 0.4.3-1.3 is to be installed [19:49] repository problems? [19:49] Pici: OerHeks: k1l_: its working now thank you very much [19:50] k1l_, but from building the source, not from our repos. [19:50] SubMind, have fun :-) [19:50] DoomBoom: "cat /etc/issue" ? [19:50] DoomBoom: ubuntu version? [19:51] Ubuntu 14.04.3 LTS \n \l [19:51] !info libwebp-dev trusty [19:51] libwebp-dev (source: libwebp): Lossy compression of digital photographic images.. In component main, is extra. Version 0.4.0-4 (trusty), package size 185 kB, installed size 619 kB [19:51] daftykins : is setup-script ./VBoxLinuxAdditions.run ? [19:52] !info libwebp5 trusty [19:52] libwebp5 (source: libwebp): Lossy compression of digital photographic images.. In component main, is extra. Version 0.4.0-4 (trusty), package size 129 kB, installed size 341 kB [19:52] Iresf: doubt it. [19:52] DoomBoom: Version 0.4.3-1.3 is for wily so it seems [19:53] does Xubuntu change package versions? [19:53] no [19:53] DoomBoom: pastebin "sudo apt-get update" [19:53] hi [19:54] DoomBoom: if you've tried to get newer packages by adding newer release repos, bad things will happen :) [19:54] wait... I see I have 2 libwebp5's now [19:55] DoomBoom: you didnt add some ppa somehow? [19:55] first one has >Homepage: http://webp.googlecode.com [19:55] DoomBoom: showing the pastebin i asked for would point this out [19:55] maybe it's from something I added long ago enough that I forgot it. I'll check it out. Thanks [19:55] oh [19:55] or at least highlight whether you have a messy install with tonnes of PPAs :> [19:56] http://pastebin.com/Q5KjhgB9 [19:58] Hey, I am new to Ubuntu and got a gpu passtrough working but can not get usb passtrough to work aswell. I followed this guide (kvm) : https://www.pugetsystems.com/labs/articles/Multiheaded-NVIDIA-Gaming-using-Ubuntu-14-04-KVM-585/ does anyone know about usb passtrough and can help? [20:03] i am trying to dual boot ubuntu on a dell inspiron duo running windows 7 to try to reset the windows password. when i boot the comp up with the live usb in i only get a blinking cursor in the top left coner of the screen... anyone have any ideas on how to get it to boot? === it is now known as Guest13893 [20:04] rmac: uefi system? [20:05] i have no idea... i can not find anything that says uefi in the bios. [20:05] !dualboot | rmac [20:05] rmac: Dual boot instructions: x86/AMD64: https://help.ubuntu.com/community/DualBoot/Windows - Macs: https://help.ubuntu.com/community/MacBookPro https://help.ubuntu.com/community/YabootConfigurationForMacintoshPowerPCsDualBoot [20:05] i do have diskette drive set to boot first & that only shows when the usb is plugged in. [20:06] rmac: how did you create your ubuntu usb? [20:07] Universal-USB-Installer-1.9.6.1 [20:07] DoomBoom: yeah you have an absolute STACK of rubbish third party PPAs there making life a mess, more than likely it's one of those causing it "apt-cache policy libwebp5" will likely point out where another is coming from [20:08] rmac: ok did you set usb to boot first in bios? [20:08] thanks daftykins, I was looking for a command like that [20:08] yes [20:08] cruft adds up when you want some applications that aren't in the main repo >_> [20:09] rmac: tryed F12 to choose your usb stick to boot? [20:09] DoomBoom: just don't ever upgrade with those present! [20:10] yes... only get cursor in top left of screen. [20:10] I've always been upgrading with them >_> [20:10] rmac: really smells like blocked fastboot/secureboot [20:11] What kernel is the daily image of Xenial using? [20:11] 4.2 still? [20:11] yes [20:11] sethj: yes and #ubuntu+1 for xenial [20:11] thats what i thought... thanks for the help lotus [20:11] sethj: so short after the release i would say its still the old one. but better ask in #ubuntu+1 [20:11] oh right, forgot about ubuntu+1. Sorry guys! [20:12] hm http://pastebin.com/SrapeU2B I was expecting a repo name, but 0.4.3-1.3 0 only has /var/lib/dpkg/status associated with it. What does that mean, daftykins ? [20:14] DoomBoom: pass. [20:14] hehe [20:14] >i libwebkitgtk-3.0-0 Depends libwebp5 [20:14] hello [20:14] that's the only 'why' [20:14] aptitude gives [20:14] DoomBoom: but i think you can install a specific version via package:### [20:15] i do not use aptitude [20:15] DoomBoom: did you install that package as .deb? [20:16] maybe it was part of a deb [20:16] DoomBoom: oh i know, "dpkg -l | grep libweb" [20:16] how can i convert swf to ogv [20:17] goddard: with a lot of pain most likely. [20:17] daftykins: so should i start beating some one and then it will convert? [20:17] TJ- not on for long, but getting: b19cc6250081ef3700146db17f1efa44 /etc/apparmor.d/usr.sbin.rsyslogd [20:17] MD5 appears to match. [20:18] goddard: that was a silly thing to say. [20:18] daftykins: im a silly person [20:18] Hey, anyone know how to get a visual report of what sectors are dead on what platters on a hard drive? I am dealing with a failing HDD, and I am curious if the dead sectors are random, or if there is a pattern. [20:18] daftykins, that only shows that libwebp5 is indeed installed [20:18] goddard: and now you're ignored (: [20:18] DoomBoom: that is a 14.04 system, right? [20:18] yipee :D [20:18] DoomBoom: right but it should state the version [20:18] yeah [20:18] DoomBoom: but you installed a 15.10 package [20:18] 0.4.3-1.3 [20:18] apparently I did [20:18] DoomBoom: so purge it, "sudo apt-get -f install" and it should be back to normal. [20:19] DoomBoom: can you post a "cat /etc/apt/sources.list" to a pastebin? [20:19] goddard it seems winff can read swf, but i havent found ogv in the presets [20:19] MonkeyDust: even if it is something else other then swf so i can play it online with HTML5 [20:20] goddard why don't you just google "swf to video" like I did [20:20] goddard ok, try winff, it's in the repos [20:20] MonkeyDust: cool thanks [20:20] k1l_, I don't think I changed sources.list apart from adding tor, but ok [20:20] halberd: because i love talking to all the pleasant people in #ubuntu [20:21] DoomBoom: well, that 15.10 package came to your system somehow. so if you did not install it manually as .deb than there must be a repo that shipped it. [20:21] http://pastebin.com/8GTwqUuJ [20:21] maybe in sources.list.d? I have some cruft there [20:22] "ls -al /etc/apt/sources.list.d" [20:23] k1l_, http://pastebin.com/dBV74ZyQ [20:23] DoomBoom: wait, better use "grep ^ /etc/apt/sources.list.d/*" [20:23] which will list the stuff inside the ppas, too [20:23] ah [20:24] http://pastebin.com/vGQN1mRJ [20:24] I am now using a live xubuntu session with usb, I want to copy everything even hiding folders and files and settings, from /home to usb flash drive, like i said copy everything from /home to a zip file on my usb flash drive, it has fat 32 because i need it for use in windows, it is the same that i use now for the live session, what should i type in the terminal to do so? [20:24] please help? [20:25] one thing that puzzles me is the only thing that depends on libwebp5 is libwebkitgtk-3.0-0, which is part of ubuntu's update notifier apparently [20:26] guys [20:26] DoomBoom: none of those PPAs ships that. [20:26] my nkscreen hsa weird red arow on it [20:26] whayt do i do [20:26] Guest13893 try rsync -a --progress ~ [your usb stick] [20:26] like i tried âot typ ewith m y face [20:26] I guess they don't, k1l_ [20:26] m712: can you paste a screenshot [20:26] onw minyutw [20:27] m712: imgur [20:27] DoomBoom: so i think it was a manual .deb install. so i suggest removing it and then reinstall to get the official one === NekoMaid420 is now known as neko-chan [20:27] i drank ther botle of vr [20:27] brer [20:27] bere [20:27] ebbeer [20:27] m712: STOP. [20:27] PLEASE HELP http://paste.ubuntu.com/12992914/ [20:27] MonkeyDust what do you mean [20:27] m712: dont spoil this channel. this is for support only. [20:27] hi all - does anyone here set up their servers to use internal ip addresses and host names with cloudera manager? having trouble with this issue, and wanted to see how to properly configure hostnames and /etc/hosts files [20:27] Guest13893 what do you mean, what do i mean? [20:28] MonkeyDust what should i type [20:28] quick question, in 15.10 is it still Xorg that handles X ? [20:28] !wine | rom- go ask them [20:28] rom- go ask them: WINE is a compatibility layer for running Windows programs on GNU/Linux - More information: https://help.ubuntu.com/community/Wine - Search the !AppDB for application compatibility ratings - Join #winehq for application help - See !virtualizers for running Windows (or another OS) inside Ubuntu [20:28] Guest13893 try rsync -avv --progress ~ [your usb stick] [20:28] drmagoo: yes [20:28] k1l_: thanks =) [20:28] drmagoo: wayland and MIR are still far from production ready on desktop [20:29] Guest13893 ~ is your /home ... [your usb stick] is similar to /dev/sdX [20:29] Hey, does anyone know the package name of the unity 7/nux debug symbols? I'm trying to fix a Unity bug... [20:29] MonkeyDust [your usb stick] i do not now [20:30] Chrome crashes repeatedly. Running 14.04 with gnome 3.12 [20:30] The Ui kinda gets frozen in some parts of the screen [20:30] Guest13893 in a terminal, type lsblk do you see your usb stick [20:30] MonkeyDust [your usb stick] like i said it is also the xubuntu live session [20:30] joshh20: you remember anything part of the packagename? [20:31] joshumax: ^ [20:31] Guest13893 you lost me === ctrlshftn is now known as ctrlshftn-away [20:31] Anyone here know if there is some major change regarding DPMS in 15.10? 'xset dpms force off" doesnt put the monitors in power-save-mode, they just go blank with backlight still on. [20:31] k1l_, 0_0 http://pastebin.com/UVBZmndn [20:31] ctrlshftn-away: google make it, as long as your graphics driver is best suited - there is nothing support here can do for you. [20:31] joshumax: the unity ones should be here: http://ddebs.ubuntu.com/pool/main/u/unity/ and the nux ones here: http://ddebs.ubuntu.com/pool/main/n/nux/ [20:31] Guest13893 do you have two usb sticks, one with the live session and one for the data? [20:31] ctrlshftn, seen that here too, my first aid would be minimize chrome and turn it up again. [20:31] lotuspsychje: I don't know the package name... But unity --advanced-debug is kinda useless without them [20:31] trism: oh thanks, I'll take a look [20:31] when apt wants to kill everything you know something is up [20:31] MonkeyDust no the same one [20:32] maybe it does have to do with Xubuntu [20:32] DoomBoom: yeah, well. there was some command combination to make that downgrade. let me rethink that [20:32] Guest13893 and do you have a free partition on the usb stick, to put your datz? [20:32] data* [20:32] MonkeyDust i want to copy from hdd to usb flash drive [20:33] DoomBoom: test sudo apt-get install --reinstall packagename [20:33] MonkeyDust no only one partition [20:33] Guest13893 guess it's not possible, then [20:33] MonkeyDust no only one partition on the usb drive [20:33] MonkeyDust why not [20:34] DoomBoom: if that doesnt change the version, that will work: "sudo apt-get install =" use the package versionnumber from the apt-cache policy output [20:34] k1l_, interesting: http://pastebin.com/juCJpKRF [20:34] Guest13893 because the live session sits in the RAM, everything you put there is lost when you shutdown [20:34] DoomBoom: that is why .deb installs are bad [20:35] MonkeyDust: do you remember that trick we found on your system? DoomBoom could use it perhaps [20:35] MonkeyDust: to get rid of a manual installed deb [20:35] I don't remember doing something like that. I don't think I've even seen the name libwebp5 before... Could another deb include it as a dependency? I wonder what it was [20:36] DoomBoom try sudo aptitude purge ~c <-- that's a tilde [20:36] hi, is the any way to do something like 'make include' or I have to do just make? [20:36] what does ~c do, MonkeyDust ? [20:36] xisco: more context? [20:36] DoomBoom: then still the package needed to be come from somewhere. [20:36] lotuspsychje ah, i remember now, even put in my rescue snippets, moment.. [20:37] MonkeyDust but i should even have access to the usb drive like a any one [20:37] k1l_, it's interesting because some of the applications to be removed by running purge were on from pretty much the beginning, like gimp... and xubuntu-desktop [20:37] DoomBoom: they depend on that package. but not on that exact (wrong) version [20:37] How to export keyring passwords? 'export' is greyed out [20:38] rom-: you have to create the folder first [20:38] so the package was installed from beginning, you just put a wrong version in meanwhile [20:38] idontwantto: have you thicked a password? [20:38] it@it:~$ lsblk [20:38] NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT [20:38] sda 8:0 0 37.3G 0 disk [20:38] ├─sda1 8:1 0 24G 0 part [20:38] ├─sda2 8:2 0 1K 0 part [20:38] DoomBoom try this, first cd /var/lib/dpkg/info/ [20:38] ├─sda3 8:3 0 3.9G 0 part [20:39] lotuspsychje, I have to export password by password? I want to export all passwords (there's lots). But even if I clicked, say, ubuntu.com password, it [20:39] its still greyed out [20:39] Guest13893: please use a pastebin for that [20:39] DoomBoom then: sudo rm [what you want removed] <-- careful, don't remove too much [20:39] MonkeyDust: forcing the package version should work [20:39] I think I'll just downgrade, eh? only thing to be removed is libsdl-image1.2:i386. Not even any executables [20:40] with the command k1l_ gave [20:40] http://paste.ubuntu.com/12993073/ [20:40] http://paste.ubuntu.com/12993073/ [20:40] DoomBoom, try grep libwebp5 /var/log/apt/history.log and looks for red tags [20:41] good evening ioria [20:41] MonkeyDust but i should even have access to the usb drive like a any one [20:41] lotuspsychje, hi Lotus [20:41] ioria, nothing [20:41] MonkeyDust but i should even have access to the usb drive like any one else [20:41] sui I installed from/using SYNAPTIC package manager [20:41] I wonder if maybe Steam is the culprit [20:41] DoomBoom, mmm... it's installed by default i think [20:42] DoomBoom, did you scroll up ? [20:42] ioria, ? [20:43] the grep prints nothing [20:43] DoomBoom, ls /var/log/apt/history.log ? [20:43] it's there [20:44] imp [20:44] I am now using a live xubuntu session with usb, I want to copy everything even hiding folders and files and settings, from /home to usb flash drive, like i said copy everything from /home to a zip file on my usb flash drive, it has fat 32 because i need it for use in windows, it is the same that i use now for the live session, what should i type in the terminal to do so? [20:44] please help? === neko-chan is now known as NEKO-CHAN [20:44] Hello, how do I force quit the "Install Shield Wizard" from Wine? [20:44] DoomBoom, cat /var/log/apt/history.log | grep libwebp5 [20:45] downgraded, now I can install libwebp-dev === NEKO-CHAN is now known as Neko-chan [20:45] TrentH: xkill? [20:45] lol [20:45] ioria, that only gives the info on what I just did, downgrade libwebp5, hehe [20:45] DoomBoom, :þ [20:45] lotuspsychje: I can't find the PID though. [20:46] TrentH: you have GUI? [20:46] Guest13893: why? are you reinstalling this host with xubuntu? [20:46] lotuspsychje: I'll try that, I didn't know what xkill did until I tried it. Thank you [20:46] Hi everyone, I have the weirdest issue. I just installed Ubuntu onto my Macbook Pro and for some reason the brightness levels won't work when I first boot it, but after I close the lid (put it to sleep) and then open it back up the brightness is working flawlessly. [20:46] lotuspsychje: That worked, thank you! [20:47] !yay [20:47] Glad you made it! :-) [20:47] thanks all [20:47] DoomBoom, dpkg -l libwebp5 says 0.4.0-4 ? [20:47] My next question is, why isn't my program installing correctly? I'm trying to install Savings Bond Wizard with Wine and it's getting stuck on the InstallShield? [20:47] zamn_: you might check your logs for ACPI errors [20:47] zamn_: might be loading the the right module doesnt work on startup but after resume. usually its the other way aroung [20:47] I'm currently using the NVIDIA proprietary drivers, have edited xorg.conf, and tried using xbrightness (with no avail) [20:47] ioria, yep... except for i386, which has status rc [20:48] DoomBoom, interesting ... are you 64 bit ? [20:48] yes [20:48] so it shouldn't matter, right? [20:48] daftykins what do you mean? [20:48] DoomBoom, if rc... no more [20:48] rc is removed and config files? If I understand that weird header correctly [20:48] lotuspsychje: the thing about that is acpi isnt even listed (acpi_video0 dir not there) [20:48] Guest13893: why are you backing up... [20:48] daftykins witch host? === cyphase is now known as Guest20641 [20:49] Guest13893: the one you're booted on obviously. [20:49] hi everyone [20:49] hi again. [20:49] lotuspsychje: I only have gmux_backlight under /sys/class/backlight [20:49] is amd cpu good for VM ? [20:50] zamn_: ubuntu version? [20:50] lotuspsychje: 15.05 [20:50] DoomBoom, yep,maybe steam [20:50] daftykins i want to save everything from /home from hdd to usb flash drive [20:50] Iresf: that is a question for ##hardware , this is an OS support channel. [20:50] Guest13893: i know what you WANT to do, i'm asking _why_ [20:50] zamn_: 15.04 gives alot of acpi issues, did you try on LTS? [20:51] rom-: i suppose you installed wine within synaptics, but you have to create that folder [20:51] sui: he's crossposting [20:51] lotuspsychje: i have not, i dont really have time to reinstall ubuntu [20:51] lotuspsychje: Any idea why my SavingsBondWizard.exe program is getting stuck upon installation? :( My grandmother really needs it. [20:51] lotuspsychje: it's not like the backlight isnt working, it just isnt working on boot :p [20:51] What operations are done when recovering from sleep vs booting? [20:51] zamn_: find the right error in logs mate [20:52] lotuspsychje: in /var/logs ? [20:52] TrentH: did you search it in playonlinux database? [20:52] Guest12893 do cp /home /dev/sdX [20:52] zamn_: syslog and dmesg could be usefull [20:52] daftykins because i will later erase and reinstall xubuntu [20:52] Guest13893: and you don't already have a separate partition for /home huh? [20:53] TrentH: what does that program do, maybe we have alternative? [20:53] daftykins yes i have [20:53] Guest13893: so then there is no reason to backup, just run the installer - select the partitions, select to format /... keep your /home - and it'll be done. [20:53] lotuspsychje: We do, it's called gBonds. The problem is, gBonds won't recognize the file format from Savings Bond Wizard. And the program is designed to update Savings Bonds from the federal reserve. [20:53] TrentH: you can also run a win virtualbox and install from there [20:54] my command copies everything in /home to your usb [20:54] hi lotus [20:54] ubuntu-mate: can we help you? [20:54] lotuspsychje: https://appdb.winehq.org/objectManager.php?sClass=application&iId=7138 [20:54] TrentH: sounds real specific [20:55] i want to create a bootnet server [20:55] 'bootnet' [20:55] what gibberish is this? :) [20:56] botnet? [20:56] bootnet? [20:56] daftykins but i will erase the hdd linux partitions, i have even windows on it, and i need to reinstall windows before [20:56] Guest13893: ok. so tar up your /home first then copy the single archive [20:56] Can I show gnome applications by category? The icons are all mixed up, what a mess! [20:57] gnome shell [20:57] Guest13893: but you can just reinstall windows, then reinstall xubuntu - no need to remove any partitions unless you're changing sizes. [20:57] its a server he give you many operation systeme to instaal it he works with pxe [20:57] daftykins windows erase linux partitions [20:57] !info gbonds | TrentH [20:57] TrentH: gbonds (source: gbonds): U.S. savings bond inventory program for GNOME. In component universe, is optional. Version 2.0.3-2.2 (wily), package size 70 kB, installed size 230 kB [20:58] Guest13893: that doesn't make any sense, what you just typed. [20:58] Guest13893: oh, no it does not. [20:58] lotuspsychje: Yes I know, but it doesn't support the correct fileformat. So I can't import exsiting bonds. [20:58] anyone know howto debug dpms-problems ? [20:59] well, I figured out comparing versions of Ubuntu for changes in packages (to find new games) http://pastebin.com/mJ93kFX6 [20:59] I want a .desktop launcher to start vi. Why doesn't this work? Nothing happens. https://gist.github.com/anonymous/9043badddfc90aa44191 [21:00] Hello, how i can install gyazo into my kubuntu? [21:00] daftykins but it does because it is a thinkpad recovery otherwise it will not reinstall [21:00] im trying with "$ curl -s https://packagecloud.io/install/repositories/gyazo/gyazo-for-linux/script.rpm.sh | sudo bash" and sudo apt-get install gyazo but it didnt work [21:00] !find gyazo [21:00] Package/file gyazo does not exist in wily [21:00] Orozco what's gyazo? [21:00] TrentH: try the real deal in virtualbox how come ppa-purge and apt-add-repository --remove don't have a "dry-run" option? [21:01] MonkeyDust: screenshot capturer [21:01] ubottu: wily? [21:01] Orozco: I am only a bot, please don't think I'm intelligent :) [21:01] !screenshot | Orozco [21:01] Orozco: Screenshots can be made with the [PrtScr] button. Want to show us a screenshot of your problem? Upload an image to http://imgur.com/ and link the created page here. [21:01] daftykins windows erase linux partitions [21:01] daftykins but it does because it is a thinkpad recovery otherwise it will not reinstall [21:01] lotuspsychje: Computer isn't fast enough to run a virtualbox. [21:01] Guest13893: ah, i would not use that to reinstall windows. anyway, my answer stands. tar, then copy. [21:01] Orozco oops, wrong factoid, my mistake [21:02] !info kazam | Orozco [21:02] Orozco: kazam (source: kazam): screencast and screenshot application created with design in mind. In component universe, is optional. Version 1.4.5-2 (wily), package size 732 kB, installed size 1693 kB [21:02] Orozco or try byzanz [21:02] MonkeyDust: Does it upload the screen automaticly and give a link? [21:03] daftykins i do not understand what do you mean [21:03] TrentH: maybe the #winehq guys might know? [21:03] Orozco i missed that part in your question [21:03] Guest13893: a tar is an archive file, create one of your /home, then copy that onto the flash drive. it's quite simple... [21:03] Orozco: pastebinit? [21:04] MonkeyDust: Gyazo let you make screenshot with ctrl+sgift + c and instantly it uploads it to internet and give you a link to share [21:04] !find gyazo [21:04] Package/file gyazo does not exist in wily [21:04] Here is link to install but it don't work for me https://github.com/gyazo/Gyazo-for-Linux/blob/master/README.md [21:05] Orozco: support on their website mate [21:05] hi [21:05] Orozco: its not an official ubuntu package === rain is now known as Guest45063 [21:05] Hello. How to add a kernel boot parameter like acpi_osi to Grub2? [21:05] What would be the proper way to do it? [21:05] and any one of you know any similar app? [21:06] bs0d: edit /etc/default/grub [21:06] bs0d: https://help.ubuntu.com/community/BootOptions [21:06] !info pastebinit | Orozco [21:06] Orozco: pastebinit (source: pastebinit): command-line pastebin client. In component main, is optional. Version 1.4-4 (wily), package size 14 kB, installed size 164 kB [21:06] Orozco https://support.gyazo.com/hc/en-us <-- support [21:07] lotuspsychje: I'll give that a try. Thank you for the support. I appreciate it. [21:07] daftykins I see a set of variable declarations in /etc/default/grub [21:07] bs0d: one time or for all times? [21:07] I have a problem with hibernate - it works only prartially. when I write pm-hibernate then it hibernates fine. I see message where it is saying that it is dumping ram into swap but when I boot, it starts as normal, it does not resume suspended session. [21:07] TrentH: hope you get it fixxed [21:07] bs0d: GRUB_CMDLINE_LINUX_DEFAULT="" [21:07] lotuspsychje: is not that for a text paste? [21:08] Orozco: yes [21:09] hello world. [21:09] !ask | Klaus_Dieter [21:09] Klaus_Dieter: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [21:09] hi Klaus_Dieter [21:09] daftykins Thanks a lot! [21:09] wow, bekks seeing you here is a surprise :) [21:10] Klaus_Dieter: :D [21:10] * daftykins waits for bs0d to come back after not knowing to run update-grub === EOIP is now known as crocodilehunter === patrick is now known as Guest10205 [21:11] Do you know why Instant messaging don't let me add my telegram account it says me "his IM Account cannot be created - a Telepathy Connection Manager named 'morse' is missing or it cannot handle protocol 'telegram'. Please try installing morse with your package manager." I installed morse [21:12] well, I am hoping to run ubuntu off a btrfs on top of lvm on top of luks just like this guy: http://askubuntu.com/questions/663844/luks-lvm-at-install-time The installer does not support this. So I set up the disk manually. Of course the initramfs fails when done with the setup. Now I thought that mounting the disks is done somewhere inside the initramfs but it seems this is wrong as the initramfs only contains microcode for the ... [21:12] ... kernel but not a real file system. what do I have to do to get my rootfs mounted? [21:12] Orozco: you can install telegram desktop [21:13] daftykins ok like a zip file? [21:13] Orozco: https://desktop.telegram.org/ [21:13] daftykins will it work on fat32? [21:13] Guest13893: i would not be suggesting it otherwise. [21:15] or put in different terms: where is the real rootfs being mounted during system startup? [21:15] daftykins and it copies everything even heading files and folders and settings? [21:15] Guest13893: how long are we going to do this before you just get it done? [21:16] can somebody explain what preloaders i can use in ubuntu? [21:16] !info preload | loa [21:16] loa: preload (source: preload): adaptive readahead daemon. In component universe, is optional. Version 0.6.4-2 (wily), package size 34 kB, installed size 135 kB [21:16] lotuspsychje: thanks you [21:16] daftykins so yes is your answer? [21:16] lotuspsychje, i need patch my kernel for this? [21:16] loa: installing a fast ssd would be helpfull too [21:16] !info prelink | lotuspsychje [21:16] lotuspsychje: prelink (source: prelink): ELF prelinking utility to speed up dynamic linking. In component universe, is optional. Version 0.0.20130503-1 (wily), package size 909 kB, installed size 1796 kB [21:17] Guest13893: see above and don't ask me anything else [21:17] lotuspsychje, yes you are right. [21:17] loa: no, just install [21:17] lotuspsychje, why then ureadahead need patch? [21:17] daftykins ok [21:17] MonkeyDust: tnx, installing [21:17] daftykins how [21:18] lotuspsychje it was for loa [21:18] Klaus_Dieter: did you unpack the initramfs? [21:18] !info prelink | loa [21:18] loa: prelink (source: prelink): ELF prelinking utility to speed up dynamic linking. In component universe, is optional. Version 0.0.20130503-1 (wily), package size 909 kB, installed size 1796 kB [21:18] MonkeyDust: too late, you speeded me up! [21:18] lotuspsychje, and what about ureadhead i need delete it? [21:19] loa: why do you keep saying patch? [21:19] lotuspsychje: how i can get it the icon? it don't have icon [21:19] akik: using cpio, yes. to my surprise the initrd was not zipped at all - neither using gzip nor lzma which it should be acording to documentation [21:19] loa: you can run both, np [21:19] lotuspsychje, because i know that ureadahead need it. [21:19] and my problem is that now i have kernel without that patch. [21:19] Orozco: just unrar the folder to /home and run telegram inside [21:20] loa: ubuntu version? [21:20] Klaus_Dieter: hmm weird. well that was my input [21:20] lotuspsychje: yes it works but it dont have telegram icon [21:20] Klaus_Dieter: because it really should have a file system [21:20] Orozco: click on the telegram inside the folder [21:20] it would be really nice if the installer supported that... although this does seem like a hell of a software stack just to access the disk... [21:20] lotuspsychje, i have 15.10 with 4.3-rc7 kernel.. such customized kernel because of skylake... [21:20] Orozco: it will open [21:21] akik: it does contain a file system having some directories and a microcode.bin file, that is it. [21:21] Orozco look in /usr/share/applications/ ... drag the icon to the desktop or taskbar [21:22] Klaus_Dieter: could it be that because of your special setup, the initramfs is created with wrong contents? [21:22] Okay, done [21:22] i have just installed kubuntu and my laptop have physical leds(for battery, wifi, bluetooth, CAPS lock etc..) but they don't work any help for it please? [21:22] Klaus_Dieter: i miss-spoke, not a file system but a cpio archive [21:23] akik: it could be. that is why I also tried running update-initramfs but it lead to the same content [21:23] loa: where did you got that kernel from [21:23] Orozco after 'just installing', but get used to the desktop first, find out how things work and are set [21:24] but = better* [21:24] lotuspsychje, http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.3-rc7-unstable/ [21:24] Klaus_Dieter: the initrd *may* have an early microcode image prefixed to the gzipped-cpio image [21:24] ok [21:25] TJ-: that makes sense because the microcode is so much smaller than the uncompressed cpio-image [21:25] Klaus_Dieter: Use lsinitramfs /boot/initrd.img-$VERSION and you'll see [21:25] lotuspsychje, tried to delete ureadahead... there package 'ubuntu-minimal' linked with him [21:25] daftykins ok [21:25] daftykins how [21:25] Klaus_Dieter: and as to your original question, yes, root-fs is mounted during execution of the scripts/tools in initial ramdisk [21:25] TJ-: yeah, there are all the files that I was expecting to see [21:26] daftykins what should i type [21:26] hi [21:26] daftykins please help [21:26] Klaus_Dieter: if you want to extract an *existing* initrd.img with a pre-image, I wrote a tool to do it I can let you have [21:26] TJ-: so do I have to dd the trailing initramfs from the cpio-archive and then extract it using cpio? [21:26] some time during a ssh session i lost the connexion how to do identify the cauze ? [21:26] lotuspsychje: one question, i have dragged firefox and delphin icons to my icons bar, how i can make them bigger? [21:26] TJ-: that would be great. that way I can modify the initramfs to contain cryptsetup, lvm and mount the rootfs [21:26] Klaus_Dieter: see https://iam.tj/projects/misc/initrd-extract.bash [21:27] Guest13893: no, bye [21:27] Klaus_Dieter: if you want cryptsetup in there, just ensure that /etc/crypttab has an entry for the encrypted root, and update-initamfs will do the work [21:28] TJ-: ah. crypttab is empty. maybe that is the reason [21:28] Klaus_Dieter: same goes for LVM. There are hook scripts in /usr/share/initramfs-tools/hooks/ to do all that [21:28] daftykins why [21:28] Klaus_Dieter: that'll be it. [21:28] daftykins please [21:29] anyone know howto debug dpms-problems ? [21:29] TJ-: that sounds like the much better solution than to hack an own initramfs. I will try this. thank you for the hint. [21:31] I am now using a live xubuntu session with usb, I want to copy everything even hiding folders and files and settings, from /home to usb flash drive, like i said copy everything from /home to a zip file on my usb flash drive, it has fat 32 because i need it for use in windows, it is the same that i use now for the live session, what should i type in the terminal to do so? [21:31] please help? [21:33] Guest13893: do you want to preserve file ownership and permissions info too? [21:33] TJ what do you mean [21:34] TJ i dont understand you [21:34] well it seems that when adding lvm and luks things do not seem to be in the correct order in the initramfs [21:35] Klaus_Dieter: if you use "update-initramfs ..." the hook scripts from lvm, cryptsetup, etc., will ensure things are inserted correctly [21:35] now the boot does not fail any more dropping me to initramfs (this is progress) but it keeps scanning for lvm "/run/lvm/lvmetad.socket: connect failed: no such file or directory" [21:35] Just installed Ubuntu 15.10, alongside Windows 10. Simple question; how would I use a private key I normally used in putty, in Ubuntu using the already given "ssh" command? [21:36] Klaus_Dieter: are you trying to build a manual install using deboostrap or is this a broken existing install? [21:36] TJ-: this is a broken existing install [21:37] TJ-: I am just hoping to fix it. [21:37] TJ-: ah, now it dropped me to the initramfs-prompt [21:38] TJ-: let me try if I can mount root manually with the tools available in this initramfs.... [21:38] Klaus_Dieter: if things installed correctly, LVMs binary should be there, and a pvscan/vgchange -ay should be done at some point when the LVM metadata is found by udevd [21:38] I am now using a live xubuntu session with usb, I want to copy everything even hiding folders and files and settings, from /home to usb flash drive, like i said copy everything from /home to a zip file on my usb flash drive, it has fat 32 because i need it for use in windows, it is the same that i use now for the live session, what should i type in the terminal to do so? [21:38] please help? [21:39] Klaus_Dieter: there should be "lib/udev/rules.d/56-lvm.rules" in the initrd [21:39] vgchange -a y lead to the error I just posted. Failed to connect to lvmetad. falling back to internal scanning. Invalid volume group name ubuntu-vg/rootfs run vgchange --help for more information [21:39] Klaus_Dieter: and also "scripts/local-block/lvm2" [21:39] vgchange is being executed automatically but it fails [21:39] Guest13893 take out the usb stick, create separate partitions for the live session an the data (one for each), then reboot the live session and copy your /home to the data partition (if there's space enough) [21:40] TJ-: both files exist. [21:40] Klaus_Dieter: "ubuntu-vg/rootfs" is a VG/LV name. Try just "ubuntu-vg" [21:40] why i have such spam in my dmesg? https://dl.dropboxusercontent.com/u/25725476/screenshots/screenshot-2015.10.29-00%3A40%3A22.png [21:40] MonkeyDust how [21:40] i found that it is when my webcam is connected. [21:41] TJ-: you are of course right and this works [21:41] MonkeyDust without deleting anything [21:41] TJ-: in /dev/mapper I now have the LVs I created during setup [21:41] and looks like it is somehow linked with cpu state driver, currently i use p-state, when it disabled i have no such spam. [21:41] how come ppa-purge and apt-add-repository --remove don't have a "dry-run" option? [21:42] Guest13893 what do you mean, without deleting anything... deleting what [21:42] hi everyone [21:42] i was wondering i could get your feedback on something [21:42] MonkeyDust stuff in the usb [21:42] have you guys tried http://privatoria.net/ vpn service? [21:42] exit [21:42] MonkeyDust how can i do [21:43] !ot | f0xtr0t-qwerty-k [21:43] f0xtr0t-qwerty-k: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [21:43] Klaus_Dieter: right. You *may* be able to restart the script now and have it do the rest of the job. as in "./init" [21:43] Guest13893 yes, delete it, create the partitons, then put back the live installation [21:43] TJ-: well I can manually mount the rootfs from inside the initramfs, which means that all the tools are there. [21:43] f0xtr0t-qwerty-k: we cant discuss all the vpn hosters in here. better ask in that named channel [21:43] j [21:44] MonkeyDust how can i do that with windows [21:44] TJ-: which script will start the rest of init? [21:44] oh my bad k1l_ [21:44] Guest13893 i don't know windows [21:44] i use ubuntu so i thought i could ask it here also lol [21:44] yuken: you need to convert the putty private key (ppk) to openssh rsa private key format with puttygen [21:44] ok i'll just ask a different channel [21:44] Hey, anyone know how to get a visual report of what sectors are dead on what platters on a hard drive? I am dealing with a failing HDD, and I am curious if the dead sectors are random, or if there is a pattern. [21:44] thanks for the heads up [21:44] Klaus_Dieter: "./init" ... that's the shell script the kernel executes and which dropped you to the busybox shell [21:44] f0xtr0t-qwerty-k: see the bots message [21:45] MonkeyDust so i need to do it from the xubuntu live session [21:45] Klaus_Dieter: there's no easy way, once dropped to the shell, to pick up where it left off, although you can try jsut typing "exit" [21:46] Guest13893 no, exit the live session, then take out the usb stick and proceed as i suggested [21:46] TJ-: ./init will again fail at recognizing lvm [21:46] MonkeyDust not possible [21:46] TJ-: I guess I will have to dig through the script and find where exactly it fails [21:46] Klaus_Dieter: then there must be an incorrect config file in there somewhere, probably that "ubuntu-vg/rootfs" VG name? [21:47] MonkeyDust i dont now how [21:47] it may just be a wrong UUID in my fstab or something similarily stupid [21:47] Guest13893 that's why i just told you how [21:47] maybe I will try /dev/mapper/lv-name instead [21:47] Klaus_Dieter: look under etc/lvm/lvm.conf - although I think that is simply the LVM service configuration, not VG specifc. That should come from the pvscan [21:48] Hey guys [21:48] MonkeyDust but you said that you dont now windows [21:48] k1l_: you still here? [21:48] Klaus_Dieter: yes, that's a good idea. Check from within the initrd shell with "cat /proc/cmdline" [21:48] Guest13893 you're trolling [21:48] MonkeyDust so impossible [21:48] can someone help me setup a dual boot please [21:48] Klaus_Dieter: use "sbin/blkid" to get the actual UUID etc [21:48] i tried following: https://www.youtube.com/watch?v=hOz66FC0pWU [21:48] django_: yes [21:48] but failed [21:48] django_: so what is the issue now? [21:49] alright im gonna go into ubuntu set up [21:49] MonkeyDust i can not do that with what otherwise [21:49] https://usercontent.irccloud-cdn.com/file/yklbLXwd/ [21:49] k1l_: that is the setup right now [21:50] MonkeyDust if not windows or live session [21:50] django_: dont use windows. please boot up a ubuntu live system. windows cant handle the ext partitions so it just lists crap. [21:50] TJ-: well I first have to get the shell back before any of that can happen [21:51] django_: on the live desktop open the "gparted" tool. [21:51] k1l_: how do i do ubuntu live system? [21:51] its just the download [21:52] django_: select: try ubuntu when booting the usb [21:52] I am now using a live xubuntu session with usb, I want to copy everything even hiding folders and files and settings, from /home to usb flash drive, like i said copy everything from /home to a zip file on my usb flash drive, it has fat 32 because i need it for use in windows, it is the same that i use now for the live session, what should i type in the terminal to do so? [21:52] yeah but then i cant download [21:52] django_: what download? [21:52] please help? [21:52] k1l_: i wanna dual boot [21:52] how can i dual boot in a try out session [21:52] django_: you have made usb-install-pendrive? [21:54] k1l_: yes [21:54] django_: you are mixing things. i still need to know what you actually have done so far and what should be the exact next steps. so please boot up the live-ubuntu so you can come back here from that live ubuntu using webchat or irc clients so we can work that out [21:54] TJ-: /proc/cmdline lists /dev/mapper/vg-ubnt--rootfs so this seems ok. I guess the kernel is looking for an lvm drive but cannot find it because it is crypted using luks, then fails and dumps to a console [21:54] k1l_: i did the USB [21:54] I am at the step to INSTALL THE DUAL BOOT [21:55] the blkid that I originally put into my fstab matches the output of blkid of the lv [21:55] django_: which step? [21:55] Guest13893: you want to copy /home from the usb stick you are booted on to the very same usb stick? if it is the same usb stick then /home is already on it [21:55] k1l_: install the dual boot [21:55] which is not availble when the device is being scanned initially [21:55] django_: i dont understand [21:55] Klaus_Dieter: that is possible, if cryptsetup hasn't been run at that point, but if you've managed to populate /dev/mapper/ with ubunut-vg then it can't be encrypted [21:55] django_: do you mean a specific howto? or what? [21:55] k1l_: i followed the steps here: https://youtu.be/hOz66FC0pWU?t=412 [21:56] and it didnt work [21:56] at that specific time [21:56] django_: first: scratch that Youtube stuff. [21:56] no [21:56] Klaus_Dieter: is the entire partition containing the LVM Physical Volume encrypted, or just the Logical Volume for the root file-system? [21:56] Ok I have a USB to install ubuntu dual boot [21:56] its ready [21:56] i boot USB and it says 'install ubuntu' [21:56] from hdd to usb drive [21:56] django_: ok, so boot that and and choose "try ubuntu" so you get a ubuntu-live-desktop [21:57] k1l_: how will that help install a dual boot? [21:57] do you now [21:57] how [21:57] TJ-: when running /scripts/local-top/crypt-root then the same lvm-error-messages apply. [21:57] django_: installing a dualboot is easy as installing a ubuntu at all. you just need to make some adjustments or be more carefull what partitions to choose. [21:58] django_: you are making it way to complicated because you follow really really really bad youtube videos. [21:58] :( [21:58] can you send a good video? [21:58] TJ-: I am now guessing that both - the lvm and the cryptroot script are using the rootfs argument from cmdline to find the root-device which is bound to fail in my setup. I will verify. [21:58] django_: no video. i already said what you should do several times now. [21:58] Guest13893: why do you want to do that? what is your end goal? [21:58] Klaus_Dieter: cryptroot parses conf/conf.d/cryptroot [21:58] k1l_: ok ill meet you on ubuntu live desktop [21:59] i need to reinstall [21:59] Klaus_Dieter: that file is generated by the initramfs hook script for cryptsetup, from the content of /etc/crypttab [21:59] windows it will erase all the linux partitions [22:01] Klaus_Dieter: on my laptop I have in conf/conf.d/cryptroot: "target=LUKS_OS,source=UUID=f7175e39-2594-4cb9-b842-de2e1c208f61,key=/xxxx/xxxx/xxx/xxx/keyfile,rootdev,lvm=VG_OS-ubuntu_15.10_rootfs,discard" [22:01] Guest13893: so you want to backup your /home? [22:02] django_: stop using youtube videos for instructions to set things up. the Signal-to-noise ratio is extremely poor. [22:02] auronandace yes [22:02] auronandace but i have fat 32 on the usb stick [22:03] Klaus_Dieter: Bravo! Exactly how I see it too SNR = 1:99 [22:03] TJ-: I have 2 lines in /etc/conf.d/cryptroot one for the rootfs and one for the swap that is on a different lv in the same vg. [22:03] k1l_: hey im on ubuntu [22:03] Klaus_Dieter: typically swap shouldn't get into that file at all, that should be handled after initrd hands over to the real root fs [22:03] it shouws target=ubnt,UUID=blaaaa,key=none,rootdev,lvm=ubuntu--vg-rootfs [22:04] auronandace yes [22:04] auronandace but i have fat 32 on the usb stick [22:04] the uuid is the uuid of the lv [22:05] it should be the blkid of the luks-container though, right? [22:05] do you now [22:05] Guest13893: have you ever reinstalled windows before? you can tell it which partition to use so it won't wipe the disk clean but you should go to ##windows for help with that [22:05] django_: so please open the gparted program and make a screenshot of it and load it to imgur [22:05] Klaus_Dieter: that looks good, though the lvm= ... suggests you've got encryption inside the LV logical volume [22:05] Guest13893: the next step after that would be to restore grub [22:05] !grub | Guest13893 [22:05] Guest13893: GRUB2 is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 [22:05] TJ-: I certainly do not. I have lvm inside luks and plain fs inside lvm [22:06] no recovery from thinkpad will erase [22:06] Klaus_Dieter: the UUID should be LVM LV's UUID if it is LV > encryption > rootfs [22:06] k1l_: what is a gparted program [22:06] TJ-: it is encryption > LV > rootfs [22:06] Klaus_Dieter: then that cryptroot entry looks wrong [22:06] not possible [22:06] Guest13893: oh, you want to use recovery tools. that's quite irritating [22:07] ok. it must be my crypttab then. let me fix it, re-generate an initramfs and reboot. [22:07] auronandace yes [22:07] auronandace do you now [22:07] how [22:08] https://usercontent.irccloud-cdn.com/file/qcLkkKYK/Screenshot%20from%202015-10-28%2022%3A07%3A24.png [22:08] django_: its the same like the one you just showed from the windows. it shows and can edit partitions [22:08] Guest13893: how many usb sticks do you have? are they big enough to backup your /home onto? [22:08] django_: press the "windows key" on keyboard. write "gparted" in that search bar. click on gpearted. [22:08] auronandace only one [22:08] auronandace and yes [22:09] https://usercontent.irccloud-cdn.com/file/5JdjTLON/Screenshot%20from%202015-10-28%2022%3A08%3A47.png [22:09] Guest13893: are you currently able to boot from the ubuntu installed on the harddrive? [22:09] auronandace no [22:10] auronandace impossible [22:10] Guest13893: then you are in a tricky position [22:10] django_: ok, so did you already install ubuntu? it looks like it [22:10] ...no that is the trial [22:10] the test [22:10] ohh [22:10] wait [22:10] auronandace yes [22:11] TJ-: thank you very much. the device boots now. [22:11] this is awesome! [22:11] auronandace but it must be something to do [22:11] django_: ok, then click on the "install ubuntu" icon and start the launcher (second from top) [22:11] auronandace i mean [22:11] Klaus_Dieter: Yay :) [22:11] auronandace why not [22:11] now all I have to do is get rid of unity, install awesome and do the rest of the setup :) [22:12] Guest13893: copying the files to a fat32 partition will lose all the permissions [22:12] django_: then choose "manual install" when it comes to ask where to install [22:13] auronandace you mean the settings [22:13] Guest13893: no, the permissions [22:13] auronandace and what is that === greyback__ is now known as greyback [22:14] Is irc.ubuntu.com a mirror for irc.freenode.com ? [22:14] auronandace i want to zip all [22:14] Any suggestions on good picture editors that can re size and make improvements to a photo with ubuntu 14.04? [22:14] Langley1: yes [22:14] auronandace to one file [22:14] i have a command that works if i enter it in bash but fails if i add it to a script im running could someone help with that. cp -pruv sourcedir/!(backups|Thumbs.db) destdir/DriveBackup [22:14] Guest13893: files have different permissions based on who owns which file, linux file systems store these permissions, fat32 doesn't [22:15] kazuma|2: f-spot is the name that is installed. that can do that [22:15] Okay thanks... how confusing [22:15] https://usercontent.irccloud-cdn.com/file/qPwkandU/Screenshot%20from%202015-10-28%2022%3A14%3A58.png [22:15] ShellGame: did you use absolute paths? [22:15] Hi, I have a problem with DPMS. Both xset and xfce4-power-manager is unable to put the minitors into power-save mode. They remain on with only backlight on [22:15] kazuma|2: stop. "shotwell" is the name [22:15] k1l_: thank you for the info I'll check it out been awhile since I ran linux 3 years thanks agin [22:16] ShellGame: and did you add #!/bin/bash as first line? [22:16] auronandace but it does not mater because i will restore them to the same place again [22:16] django_: yes, unmount them [22:16] Klaus_Dieter: the path is relitive to the users home directory and the shebang is there [22:16] k1l_: how? [22:17] auronandace from the zip file again [22:17] django_: click yes [22:17] Guest13893: it does matter because when you restore them there will be no permissions on all the files [22:17] Guest13893: i don't even know if a zip or a tarball keeps permissions intact sorry [22:17] ShellGame: what is the shebang line of the script? which shell does it invoke? is it also bash? [22:18] TJ-: yep its #!/bin/bash [22:20] https://usercontent.irccloud-cdn.com/file/2DrqswZF/Screenshot%20from%202015-10-28%2022%3A20%3A04.png [22:21] django_: ok, so there is already a 14.04 installed? if you want to install over that install we can carry on. [22:22] django_: then choose "something else" [22:23] https://usercontent.irccloud-cdn.com/file/LaLbFiY0/Screenshot%20from%202015-10-28%2022%3A23%3A16.png [22:25] what's the terminal called in kde? [22:25] django_: click on sd5 and change it to be mounted as "swap". [22:25] MonkeyDust: Konsole? === Xe is now known as \section{Xe} [22:25] tnx [22:26] k1l_: its already swap [22:26] type is swap for sd5 [22:26] django_: then click on the sda8 and change that to be mounted as "/". then make sure that one is checked to be formated. (this will erase all the ubuntu data) [22:26] django_: you need to advise this installer now to install that as swap. just beeing there is not enough === \section{Xe} is now known as Xe [22:28] https://usercontent.irccloud-cdn.com/file/zqig5Q59/Screenshot%20from%202015-10-28%2022%3A28%3A08.png [22:29] django_: read what i wrote. you need to open the "change" window on that partition and change the things i said [22:29] ShellGame: try if it works with absolute paths [22:30] hello guys [22:30] i need some help [22:30] https://usercontent.irccloud-cdn.com/file/CT7hjdhr/Screenshot%20from%202015-10-28%2022%3A29%3A59.png [22:30] django_: come on. its still not changed [22:31] i downloaded gc_command stopper for coduo server but when i try to start it i get this error: Segmentation fault (core dumped) [22:32] django_: it is not a difficult task. it is similar to the task you would do on a windows install with several OS. so click on "change" and mark it to mount as "/" and mark it to be formated (as ext4) [22:32] fizlik: what is coduo server [22:32] with regular coduo_lnxded its everything fine [22:32] call of duty united offensive [22:32] game [22:32] TJ-: well... if the tools support this setup, then it would be great if the installer did so as well [22:33] fizlik: you'd have to ask the developers or see if they have a support forum or something [22:33] fizlik: find a game server channel perhaps. [22:33] k [22:33] tx === Myrtti_ is now known as Myrtti [22:38] https://usercontent.irccloud-cdn.com/file/QRQYNHMO/Screenshot%20from%202015-10-28%2022%3A31%3A56.png [22:38] idk why firefox froe [22:38] froze [22:39] django_: so now for sda5 and make it mount as "swap" [22:39] you still need to adress that. its not enough when its just there as swap already. [22:40] what does mount as swap mean [22:40] virtual memory. [22:40] django_: the same you did with sda8 as "/". just choose "swap" now === beapen is now known as ehealth [22:41] k1l_: sd5 already has type swap [22:41] django_: not "type". [22:41] Hello world I fixed my Ubuntu install without grub being on the primary drive [22:41] django_: "mount" [22:42] django_: you are making it too difficult because you dont read the details. [22:42] Thank you and goodbye [22:42] https://usercontent.irccloud-cdn.com/file/K2DxDpmN/Screenshot%20from%202015-10-28%2022%3A41%3A48.png [22:42] there isnt a mounting option [22:43] ok, then click ok there. then press install now. [22:44] if someone can help me, i'm trying to upgrade screen. i'm running 14.04 LTS. screen --version shows 4.01.00devel. apt-cache search screen shows the latest is 4.1.0. when i try to apt-get install screen, it tells me i'm already at the newest version. what am i diong wrong? [22:44] k1l_: do i need to highlight a specific device? [22:45] majikman, apt-cache policy screen is it on backports maybe? [22:45] https://usercontent.irccloud-cdn.com/file/KW80StPt/Screenshot%20from%202015-10-28%2022%3A45%3A01.png [22:45] django_: you mean "device for bootloader installation"? [22:46] the tab device it says /dev/sda etc...do i just hit install do i have to have a specific one highlighted [22:46] kostkon, ahh... i'm being stupid. 4.01.00 == 4.1.0 [22:46] django_: its fine that way [22:46] Klaus_Dieter: the installer does support and do LUKS/dm_crypt + LVM, and even ecryptfs /home/$USER on top :) [22:47] TJ-: not from the gui... [22:47] Klaus_Dieter: Yes [22:47] majikman, ok [22:47] Klaus_Dieter: ubiquity has an option for full disk encryption [22:47] TJ-: I was able to set this up manually. the installer supports btrfs, lvm and luks but not luks > lvm > btrfs using the gui - at least not in any way I found [22:48] ah, of course I did not want to encrypt the whole hdd but just a partigion since the device has an efi boot partition on it [22:48] maybe that is why [22:50] Klaus_Dieter: the FDE won't encrypt the EFI-SP, only the partition which will contain the LVM VG [22:50] hello [22:50] making an update I get this error [22:50] Klaus_Dieter: it'll also create a separate partition for the GRUB root file-system, although manually you can encrpyt that too [22:51] W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9DA4BD18B9A06DE3 [22:51] how can i resolve this [22:51] let me guess, opera ? [22:54] Klaus_Dieter: Hmmm, once the LVs are configured the file-system on them shouldn't affect the LUKS outer, but maybe there's some speecial logic for btfrs support in the installer. I do recall some developer discussions about it a long time ago [22:54] TJ-: I think there is because btrfs uses subvolumes [22:54] tuxedo: which ppa is it? [22:54] which adds yet another layer of abstraction on top of this stack [22:54] W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9DA4BD18B9A06DE3 [22:55] it doesnt tell me [22:55] Klaus_Dieter: I think you're correct [22:56] Klaus_Dieter: on that subject; are you aware of the very recent patches for BTFRS shadow volume corruption? [22:56] tuxedo: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 9DA4BD18B9A06DE3 [22:58] TJ-: actually, no I am not. [22:59] ok [22:59] now ? [22:59] Klaus_Dieter: I saw it mentioned a day or so ago, so there should be upgraded kernels appearing soon. I think it mainly affects 14.04, but may affect 15.04 too [22:59] tuxedo: sudo apt update [22:59] ok [23:00] now is fine [23:00] thanks kll [23:01] TJ-: what does it do? is it a bug I should be concerned about? [23:03] Klaus_Dieter: I'm not sure, but realising you are using it I thought I'd mention it. Let me see if I can dig out the details [23:04] Klaus_Dieter: From #ubuntu-kernel: "2015-10-28 15:16:05 kamal jtaylor, yes, thanks for the heads-up. I'll apply this to 3.19-stable and 3.13-stable today and so it'll release with the other btrfs read corruption fix" [23:04] TJ-: this is 4.2 [23:05] lovely [23:05] how come ppa-purge and apt-add-repository --remove don't have a "dry-run" option? [23:06] k1l_: i went until the end, hit restart and after restart it went straight to windows [23:06] it said 'ubuntu is complete restart' [23:06] hello [23:06] do you now any channel of ssl? [23:06] django_: ok so the install worked. there just seems to be a bootloader issue [23:07] !bootrepair | django_ [23:07] django_: Boot-Repair is a simple tool to repair frequent boot issues you may encounter in Ubuntu. See https://help.ubuntu.com/community/Boot-Repair for more info. [23:07] k1l_: im on windows now should i go back? [23:07] Klaus_Dieter: not sure whether those are backports from mainline or not, can't readily identify the bug report covering them, but here's a taster of confirmed btfrs issues: [23:07] there is any difference between a ca and a self signed ca? [23:07] https://bugs.launchpad.net/ubuntu/+source/linux/?field.searchtext=btrfs&search=Search&field.status%3Alist=NEW&field.status%3Alist=INCOMPLETE_WITH_RESPONSE&field.status%3Alist=INCOMPLETE_WITHOUT_RESPONSE&field.status%3Alist=CONFIRMED&field.status%3Alist=TRIAGED&field.status%3Alist=INPROGRESS&field.status%3Alist=FIXCOMMITTED [23:07] TJ-: thank you. [23:08] there is any difference between a ca and a self signed ca? [23:09] TJ-: well... fortunately I have a backup and only a copy of my data resides on the device so I am not too worried [23:09] but having a stable fs is really nice.... [23:13] Klaus_Dieter: found some references in gitweb: http://kernel.ubuntu.com/git/ubuntu/linux.git/ [23:21] hello how can i view images over network? [23:22] i installed smbclient [23:22] Anyone know of a cross platrom (obviously linux) password manager? [23:22] **that works well [23:22] ***Free [23:23] shadowRAMM: I use kwalletmanager. since kde works on windows as well it might fall under your definition of cross-platform although I doubt you would want to install kde on windows just for that [23:23] well, I would need it to work on OS X also [23:24] but the hard part is finding one that works on linux also [23:24] shadowRAMM: keepassx [23:25] hello everone, im pretty new to linux but to make things short i used it shortly on an old computer, i built a gaming pc from scratch and i cant get kubuntu to boot, i always get an error saying "gave up waiting on root device" then gives me some common problems, but with the keyboard im using i cant type anything this early in the boot, so i boot into this live usb session and try to find some referance to the hard drive the [23:25] install is on and i cant find it anywhere, and after the gave up waiting warning i also get ALERT! /dev/disk/by-uuid/xxxxxxxx-xxxx-xxxx-xx$ does not exist so i came here hoping someone had some sort of idea [23:25] i'm having a hard time controlling the samba services.. looks like the init scripts does nothing.. service samba stop doesn't actually kill the processes [23:25] my /dev has no /disk at all === tom_ is now known as Guest37150 [23:28] Oct 29 00:21:25 core kernel: [212512.385200] init: smbd main process (29044) killed by KILL signal [23:28] Oct 29 00:21:25 core kernel: [212512.385225] init: smbd main process ended, respawning [23:31] chanserv reg nick [23:31] grrr [23:31] Anyone here [23:32] some are [23:32] Lol [23:32] it's not possible to view images over network with ubuntu? [23:32] I am trying to install a Ubuntu 14 server with a gui, i was hoping someone could help me. [23:33] Ontec: no its not, there are several ways to do this. but you did not describe a specific problem [23:33] only way i know is smbclient [23:34] Ontec: so on the remote pc, what service is offered? [23:34] anyone know how to in 15.10 downgrade the nvidia driver from 352 to 346 (there seems to be an issue with dpms in 352) the 346 package is just a dummy and points to 352 [23:34] My specific problem is I am on a dedicated server that was installed on our host, I am using putty to connect and right now its all command line, I attempted to install kde as well as gnome, they seem to be installed but they will not launch using X [23:34] but image viewer i use (gwenview) shows nothing [23:34] only loading icon [23:35] k1l_: windows share [23:35] Ontec: you keep repeating smbclient. so is smb server running on that remote pc? [23:35] Ontec: so mount it with nautilus? [23:35] i think windowzs=samba [23:35] so yes? [23:35] Ontec: keep in mind that its slow over network and samba [23:37] when i mount whole network becomes slow [23:37] not if i use other windows [23:38] is there better way? [23:39] My specific problem is I am on a dedicated server that was installed on our host, I am using putty to connect and right now its all command line, I attempted to install kde as well as gnome, they seem to be installed but they will not launch using X [23:39] Ontec: dropbox ? googledrive spideroak seafile onedrive etc etc are all solutions [23:39] Just installed Ubuntu 15.10, alongside Windows 10. Simple question; how would I use a private key I normally used in putty, in Ubuntu using the already given "ssh" command? [23:39] cloud=bad privacy nvm [23:39] Ontec: well, it works here with smb. but i dont know what is going wrong on your side [23:40] Ontec: not all of them solutions require the cloud [23:40] Am i in the wrong chan [23:40] is there a server help chan? [23:40] i always have weird issues [23:41] how can i find cause? [23:41] KFKG_: #ubuntu-server i believe [23:41] smb log? [23:41] ok that helps [23:42] or is their a more general log i can look at ie. for apps [23:44] thenerdjones: As you have no other response, I offer my assistance , bear in mind I am busy also in other channels; if you can live with my delays . [23:44] * Yuken cries as he waits [23:53] Yuken, do you mean ssh keys ? https://help.ubuntu.com/community/SSH/OpenSSH/Keys [23:53] hi [23:54] Yes, OerHeks. Thanks. [23:56] [23:57] hello, recently checked my last login and found a login i don't recognize... the login name android-xxxxxxxxxxxxxxxxx.home has anyone seen anything like this