VictoriaXOXOk1l_: Wait. "sudo apt-get autoremove" or "sudo apt-get autoremove libreoffice"?00:03
VictoriaXOXOk1l_: How does that know to remove LibreOffice? :o00:03
AlexQVictoriaXOXO: check out "man autoremove"00:03
AlexQuum, man apt-get of course00:04
k1l_VictoriaXOXO: autoremove removes packages that are not marked as needed by other packages.00:04
Bashing-omAlexQ: Under systend it is "systenctl" to control services; See : http://xmodulo.com/use-systemd-system-administration-debian.html .00:05
VictoriaXOXOk1l_: I'm sorry for being stupid, but is LibreOffice the ONLY thing that is not needed by other packages? I don't understand how that command can now to just remove LibreOffice and nothing else.00:05
k1l_VictoriaXOXO: that is the magic of the package-system00:05
Bashing-omAlexQ: Typos // systen/system* .00:06
k1l_VictoriaXOXO: have a read: https://help.ubuntu.com/community/AptGet/Howto00:06
VictoriaXOXOk1l_: Would you get upset if I just try "sudo apt-get autoremove libreoffice*" instead?00:06
snarkbarkso apparently if I set my hardware acceleration in xorg config to UXA the problem with my graphics freezing up when in full screen goes away00:07
snarkbarkbuuuuut the lag is unbearable00:07
AlexQVictoriaXOXO: That is not a correct syntax00:07
snarkbarkanyone else ever deal with this or know where I should go to get answers?00:07
VictoriaXOXOAlexQ: Why not?00:07
VictoriaXOXOk1l_: I'll read.00:07
AlexQVictoriaXOXO: autoremove doesn't require nor accept package list00:07
daftykinsautoremove does not take a package as a parameter00:07
daftykinslearn to read man pages.00:07
k1l_AlexQ: it does accept packages00:07
VictoriaXOXOOh, lord. XD00:08
OerHeksVictoriaXOXO, are you writing a book?00:08
daftykinsOerHeks: feels like it doesn't it, "100 ways to perform pointless actions on Ubuntu"00:08
AlexQk1l_: So what does it do when you pass a package name then?00:08
VictoriaXOXOOerHeks: No. Why would you think that? :P00:08
k1l_VictoriaXOXO: you really should start to use manpages. that will answer 99% of what you are asking about programs.00:09
AlexQOerHeks: :D :D00:09
VictoriaXOXOdaftykins: And then YOU pm ME about making snarky remakrs? Come on... ;)00:09
k1l_!manpage | VictoriaXOXO00:09
ubottuVictoriaXOXO: The "man" command brings up the Linux manual pages for the command you're interested in. Try "man intro" at the  command line, or see https://help.ubuntu.com/community/UsingTheTerminal | Manpages online: http://manpages.ubuntu.com/00:09
OerHeksI do, "things not to do with Ubuntu"00:09
snarkbarkvery frustrating :<00:09
k1l_AlexQ: same as ap-get remove package, apt-get autoremove. just in one step00:09
daftykinsi'm allowed (:00:09
VictoriaXOXOSo am I.00:09
AlexQk1l_: Hm, interesting, not in the man page I guess.00:09
VictoriaXOXOk1l_: AlexQ: daftykins: So does autoremove accept package names or not?00:10
daftykinsread the man page and find out first hand00:10
daftykinswhat? it's how we learned things, why can't you?00:11
k1l_AlexQ: it doesnt explicitly tell you that, right.00:11
VictoriaXOXO95% of the time this "support" channel is just like a find-it-out-for-yourself-kick-in-the-butt.00:12
VictoriaXOXOFor elitists to feel good about themselves.00:12
VictoriaXOXOStill SOME helpful people, though.00:12
k1l_VictoriaXOXO: we try to help you help yourself. we want you to solve your issues on your own in the future so we can help new beginners to get used to ubuntu.00:12
AlexQNo, for people with serious problems to have a chance to get help.00:12
VictoriaXOXOk1l_: Yes, I know, but I didn't point that towards you.00:12
VictoriaXOXOAlexQ: You tell me to read the man page when it's not even in there. You're spreading FUD.00:13
pauljwVictoriaXOXO: man apt-get00:13
AlexQVictoriaXOXO: The function of "autoremove" is well explained in "man apt-get".00:13
VictoriaXOXOpauljw: I'm reading the link k1l_ gave me. :)00:13
freakyyhi all. why does vim when i use arrow keys print Ds etc. and and backspace doesnt work and so on?00:13
daftykinsVictoriaXOXO: it's not elitist, it's pointing out how you refuse to learn how to learn for yourself00:14
freakyycan i do somethin aobut it?00:14
k1l_VictoriaXOXO: no need to make a drama about it and offend volunteer helpers in here.00:14
k1l_VictoriaXOXO: we have been very very very patient. its time to learn to fly now :)00:14
AlexQfreakyy: But have you used vim before and it worked well?00:15
freakyyAlexQ: no fresh install00:15
AlexQfreakyy: But I mean, do you know *how* to use vim? Because it is a bit different. For something simpler and more intuitive try nano.00:16
VictoriaXOXOdaftykins: k1l_: What is the point of this channel or ANY forum or whatever out there? Everything has already been asked and everything has already been answered. People should just isolate themselves and use search engines to solve their problems. Right?00:16
k1l_VictoriaXOXO: no need for drama now00:16
freakyyAlexQ: i know how vim works yes00:16
VictoriaXOXOk1l_: That was my last question regarding this. :)00:16
freakyyit works on my server00:16
freakyyi googled it i might find help there thank you00:16
daftykinsVictoriaXOXO: i think someone needs to grow up and stop acting so entitled.00:17
latrodectusVictoriaXOXO: because people like interaction00:17
daftykinslet's move on now.00:17
k1l_VictoriaXOXO: we cant keep everyone in here asking us to read the manpages for them. so we try to educate them to help themselves. if they still have issues they are free to ask here of course.00:17
daftykinsremember, if you have any issues with the volunteer support, you are absolutely welcome to request a refund00:17
VictoriaXOXOk1l_: I need to adress what daftykins just said. daftykins: Dude. You threaten me in private messages and then you act the same way back? LOL!00:17
VictoriaXOXOI'm done now.00:18
latrodectusVictoriaXOXO: if you want to continue this please do so at #ubuntu-discuss00:18
k1l_VictoriaXOXO: just imagine every ubuntu user would still in here ask the easiest things. this would be a very full channel and a very noisy one.00:18
VictoriaXOXOlatrodectus: Nope. I'm done.00:18
latrodectus^ #ubuntu-discuss00:18
VictoriaXOXOk1l_: Easy according to whom, though? ;)00:18
latrodectusk1l_ | VictoriaXOXO | anyone_else_inSthis_discussion00:19
daftykinsusers capable of using a search engine00:19
VictoriaXOXOlatrodectus: Nope. We're done now. :)00:19
taehyub#join e.kr00:21
=== chase is now known as Guest9116
freakyyAlexQ: got it working.00:27
freakyyguys, is there a fast way to add desktop icons? like a desktop icon creator?00:27
OerHeksfreakyy, i think you need unity-tweak for that00:29
OerHeks!info unity-tweak00:29
ubottuPackage unity-tweak does not exist in wily00:29
freakyylemme apt-cache search it00:29
OerHeks!info unity-tweak-tool00:30
ubottuunity-tweak-tool (source: unity-tweak-tool): configuration tool for the Unity desktop environment. In component universe, is optional. Version 0.0.6ubuntu3 (wily), package size 325 kB, installed size 2353 kB00:30
freakyyOerHeks: hm, i installed it but where can i add icons now?00:31
=== Ornacia is now known as Deez_Nuts
OerHekshmm not sure, i thought that tool unlocks it00:33
freakyyOerHeks: unlocks what?00:34
OerHeksthe option to place desktop icons00:34
AlexQBashing-om: Any progress with the upgrade-related smooth scrolling issue? I am switching to the fresh install either way, the old one is just... slow. Especially booting, but dunno why, maybe will check with systemctl these systemctl tools out of interest00:35
freakyyOerHeks: no the problem is, i always have to manually create desktop icon files. i dont want that. i want an automated way.00:36
Bashing-omAlexQ: Naww .. slow on the learning curve here ..Still in progress with the_count .00:39
AlexQBashing-om: Interestingly, smooth scrolling works flawlessly in crash report windows (on that upgraded OS) :D I mean, with no jitter.00:39
AlexQBashing-om: My gut tells me it is related to some gtk libs or sth, not necessarily drivers or Xorg. But I am leaving that now, my old OS has other problems as well00:40
Bashing-omAlexQ: Adds to the notion it is a lost in translation thing - somewhere .00:40
the_countBashing-om: Ok... back00:43
freakyyok i dotn know - my vim is messed up. if i press i then backspace it doesnt erase if i press arrow keys it prints B and Ds into the file. i cant edit like this. can anyone tell me what i should add into vimrc file to fix this?00:45
somsipfreakyy: set nocompatible00:46
freakyysomsip: thank you so much ;D lemme see if it works00:47
freakyyis th .vimrc in ~/.vimrc?00:47
freakyyin ubuntu?00:47
somsipfreakyy: in everything00:47
=== vhadil is now known as vhadilo
freakyythank you very much - it worked :)00:50
somsipfreakyy: aye. It'll do that00:50
freakyywhy dont they do this by default00:50
freakyyi have to set it every time00:50
somsipfreakyy: http://superuser.com/questions/543317/what-is-compatible-mode-in-vim00:50
Bashing-omthe_count: Re-install ' sudo apt-get install --reinstall linux-headers-3.19.0-33 ; sudo apt-get install --reinstall linux-headers-3.19.0-33-generic ; sudo apt-get install --reinstall linux-image-3.19.0-33-generic ; sudo apt-get install --reinstall linux-image-extra-3.19.0-33-generic ' . Reboot into the -53 kernel .. see what is now .00:51
freakyyokt hanks :)00:51
Nick714So I have a VPS I made on my computer. So, it can connect to the internet and download files, but when I do ifconfig my adress is Any ideas how?00:52
the_countBashing-om: Wait a second... I am in the -53 kernel currently... And, is there any other precausions we should make to make sure it is completeley removed?00:53
freakyyis there any way i can watch a package for updates? like the fglrx and fglrx-updates packages00:53
Nick714Does it take on the IP of the machine I am running00:53
owen1every 3 seconds i see a modal popup with the title: OpenSSH. it ask me for the password of a my server. no matter what i type it opens again which makes my laptop unusable until i disconnect from the internet. any clues?00:56
Bashing-omthe_count: I have extermne difficulty keeping up with what you think . You told me earlier that you were booting a 3.16 kernel ! . // I confirmed from your last paste that the 3.19.0-33 was all removed  ( or so I thought).00:56
owen1(currently i use another laptop)00:56
Nick714Any ideas on why when I have full internet on my Ubuntu Server but no ipv4 ip? I do ifconfig and it says it's :(00:57
the_countBashing-om: You are thinking correctly, just wannted to make sure we were doing everything right since the separations in time between this00:58
Bashing-omthe_count: K .. see your " http://paste.ubuntu.com/13459048/ " 3.19.0-33 is gone gone .00:59
the_countBashing-om: Ok... Would it be a good idea to reboot before reinstalling the new kernel?01:00
daftykinsNick714: could you share an "ip a" in a pastebin? PM it if you're worried about sharing01:01
Bashing-omthe_count: Wont't hurt to reboot .. but, I do not see how it will help .. but .. could be cheap insurance to reboot prior .01:02
the_countBashing-om: Ok, rebooting, then i'll do this01:03
Nick714daftykins: I will but one question... When I do "ifconfig" the lo is basically connected to nothing and eth0 has an IP. So lo is wifi I think and it is connected to my Mac's internet, is it basically connected to my Mac sort of through Ethernet which is why it's in eth0?01:03
daftykinsNick714: lo is loopback,
daftykinsor ::1 for v601:04
Nick714daftykins: Ok I will PM you the ip a, can I blur out the inet adress (thats the IP right?01:05
the_countBashing-om: Ok... Shall I now reinstall?01:05
daftykinsNick714: err, a v4 on which interface?01:05
Bashing-omthe_count: Yepper .. re-install the 3.19.0-33 kernel .01:06
Abehow can you save that firefox saved the html5 by default. It always goes back to the flash player01:06
* Nick714 slaps daftykins around a bit with a large fishbot01:07
Nick714How do I PM you daftykins01:07
SwishAre we 12 years old again?  Whoever's spamming, be thoughtful of other people please.  It's not appreciated.01:08
DalekSecNick714, the_count: They can't read you as you aren't registered and this channel has muted unregistered users due to the spam above.01:12
the_countDalekSec: There, registered01:12
DalekSecthe_count: We can read you now!01:13
ubottuInformation about registering your nickname: https://help.ubuntu.com/community/InternetRelayChat/Registration - Type « /nick <nickname> » to select your nickname. Registration help available by typing /join #freenode01:13
the_countDalekSec: +1 for your name01:13
the_countBashing-om: Shall I now reboot again?01:14
freakyyis there a better screenshot utility than the default gnome screenshot available?01:14
freakyybecause it doesnt auto-name screenshots and always asks again for the place to store screenshots01:14
DalekSec!es | Honoret2801:14
ubottuHonoret28: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro.01:14
the_countBashing-om: Rebooted01:23
Bashing-omthe_count: Any change with the touchpad ?01:24
daftykinsout of curiosity what does the touchpad do wrong again? :)01:25
the_countBashing-om: No...01:25
the_countBashing-om: I have to go once again, get a shower... So I'll talk to you later01:25
RandomNoobplease write me if you know python guys. In python channel nobody is answering01:25
the_countdaftykins: Anything involving multiple fingers is not working, scroll, right click, etc...01:26
Bashing-omthe_count: Respond to daftykins Please befire ya go .01:26
the_countBashing-om: Beat you01:26
clorisuhi, it seems my archive file is broken. Does anybody know what went wrong with this archive file? http://imgur.com/a/5ibqx (First image is the main directory, following two are the subfolders) -- When I transferred it originally it was just the 108.MOV file which was 3.7GB, but it split into that weird encryption folder which is 3.7GB and the 108.MOV is now 0 bytes? Is there a way to fix this, if not is there a way to recover just a portion of the data inst01:26
clorisuead of the whole so the video is somewhat watchable?01:26
Bashing-omHey, when yer fast ,, yer fast :) .01:26
daftykinsthe_count: oh right, which is confirmed working in another OS such as Windows?01:27
the_countdaftykins: Yes01:31
the_countdaftykins: i'll beback in 10 min and you can question[crossthrough]interogate me some more01:32
daftykinsheh ok01:33
cooldman224Anyone encountered the hd format bug when installing where the formatting is stuck at 33%? Currently can't install kubuntu... I tried to wipe the hd with gparted but didn't help01:35
daftykinscooldman224: did you delete partitions only, or more?01:38
cooldman224daftykins: I deleted all partitions on the hd01:39
daftykinsok, that will have left the partition table01:39
daftykinswhich kind of system is this? anything special about it? laptop/desktop/VM ?01:39
cooldman224a desktop. so i need to wipe the partition table as well?01:40
daftykinspossibly, do you know for sure that your downloaded ISO was good - and that your prepared flash drive/DVD is good also?01:40
cooldman224i know ISO is good because i used to install on the vm. the flash drive has had issues from time to time01:41
daftykinshmm ok, are you installing EFI/legacy/what the hell is that?01:41
cooldman224legacy BIOS01:41
daftykinscool, do you get the 'check disc/media' option on the main menu after boot?01:42
cooldman224like on the grub menu?01:42
daftykinsnot 100% with kubuntu media, but standard ubuntu would ask you for a language then have try/install/check/memtest/boot from HDD01:43
cooldman224right right01:44
OerHeksjust let theinstaller use the whole dic, it will generate a fres mbr.01:44
cooldman224yeah i make separate partitions for certain mount points01:46
cooldman224i guess i can try the whole disc then reinstall to my liking?01:46
cooldman224and i dont see any option to check the media. just loaded up the iso on a vm01:48
daftykinscooldman224: no harm in running "sudo dd if=/dev/zero of=/dev/sda bs=1M count=5" to nuke the disk fully01:49
daftykinswouldn't hurt to test install in the VM :>01:49
cooldman224well i did a test install on the vm as a trial for kubuntu, if thats what you mean?01:50
daftykinsok so good ISO, questionable flash drive01:50
the_countdaftykins: back01:50
daftykinsi started to wonder if your touchpad were a model that doesn't even support that, but Windows rules that out - so i've nothing to add i'm afraid01:52
daftykinsi don't use desktop so i dont really have any experience with touchpad issues - also i've shared what little i did have with Bashing-om :)01:52
mukyHello everyone, does anyone know how to change language at thunderbird. I tried googling but didnt help me. I need thunderbird with a specific language.01:53
the_countdaftykins: See, it did work with the 3.16.0-33 kernel.... That's what makes it super strange01:53
daftykinsthe_count: and if you boot that one even now, it works fine... just anything newer and it's basic features only?01:56
the_countdaftykins: Pretty much...01:56
daftykinsthe_count: it requires more work after boot?01:57
daftykins(boot of the -33 kernel)01:57
the_countdaftykins: The only thing wrong with that kernel is that the trackpad was very jumppy... It was hard to get the mouse over something and click01:57
freakyyhi all. i currently have ubuntu installed. if i now install kubuntu-desktop, how can i get the ubuntu start splash back?01:57
daftykinsthe_count: also, do you mean 3.19.0-33?01:57
the_countdaftykins: Actually, i meant 3.13.0-33, not 3.16 ~ that one it works fine except for jumpy mouse... Anything later, and those features are gone but the jumpy mouse problem is fixed01:59
daftykinsthe_count: ok, i think i saw you try vivid kernels too, the 3.19 set?02:00
the_countdaftykins: Yes, we were on 3.16 onto 3.19, but the same issue02:00
daftykinsand 4.2 from 15.10 ?02:01
the_countdaftykins: The highest we have tried is 3.19.0-3002:01
daftykinswouldn't hurt to download a 15.10 ISO and test it out in the live session booted from USB flash drive?02:02
Bashing-omthe_count: You are supposed to at this point be booting and trying 3.19.0-33 .02:02
the_countdaftykins: Probably not02:02
the_countBashing-om: That is what I am in02:03
the_countBashing-om, daftykins: http://trustdarkness.com/wordpress/dell-sputnik-xps-13-touchpad-settings-not-working-in-updated-ubuntumint/02:03
RoundDuckManhttps://askubuntu.com/questions/701315/keyboard-input-meathods-ibus-crashed-and-icons-randomly-rearranging help?02:04
Bashing-omthe_count: daftykins's blog : http://www.techblo.gg/?p=301 has a better option than the above .02:05
VictoriaXOXOQ: What would cause "No Text" in a piece of software's menu? Like this... https://i.imgur.com/vHUstnq.png02:06
daftykinsthe_count: ooh is it an XPS 13? 9350 or 9343? :D02:06
the_countBashing-om: I see coincidences forming02:06
daftykinsthe 9350 is my current dream laptop if i were rich ;)02:07
the_countdaftykins: I have a Lenovo yoga 2 Pro02:07
daftykinsoh ok02:07
mukyhey ppl. Where can i find where thunderbird files are.  I want to place the thunderbird in my language and i need to change the files. So where are thunderbird files located. I am new at linux02:07
RoundDuckMandaftykins: Can you help me find out what's happening here? https://askubuntu.com/questions/701315/keyboard-input-meathods-ibus-crashed-and-icons-randomly-rearranging02:07
Bashing-omthe_count: Keep in mind, if we were not aware of it .. we would not know of it .. Maybe no fix .. not much for doing things blindly - but might prove of some value  in the failure (?) .02:08
the_countBashing-om: ??02:08
the_countBashing-om: So shall I try it?02:10
daftykinsRoundDuckMan: 15.10?02:10
Bashing-omthe_count: We can try the ”quiet splash i8042.nopnp” echo “blacklist i2c_hid” | sudo tee /etc/modprobe.d/i2c-hid.conf as per daftykins' blog . It is reversable .02:10
RoundDuckMandaftykins: 14.04.302:10
the_countBashing-om: Ok... I'll try it // if something goes wrong I hope we all agree daftykins takes the blame02:11
RoundDuckManthat said, I noticed lots of bugs in general on 14.04-based anything, including mainline Ubuntu.02:11
Bashing-omthe_count: http://www.techblo.gg/?p=301 . Nope .. like I say .. It is but a possibility .. but I do not hold my breath .02:12
the_countBashing-om: ok, rebooting02:12
daftykinswoohoo for the blame \o/02:12
daftykinsRoundDuckMan: then i'm afraid all i see is paranoid concerns and nothing to really get worried about02:12
daftykinsRoundDuckMan: pretty sure hackers don't break in and then arrange your icons02:13
Bashing-omdaftykins: How come you do not get the blame when it is a great solution ??02:13
the_countBashing-om: Rebooted, nothing02:14
OerHekspro .. the french might have an answer http://doc.ubuntu-fr.org/lenovo_yoga_2_pro02:14
the_countOerHeks: Problem... I seem to have forgotten my frence... :D02:15
Bashing-omthe_count: I "thought" you were in favor of making the edit to grub and blacklisting ?02:15
RoundDuckManI'm paranoid because I got OCD. But if you want me to, I got video proof of things that happened, like ibus crashing for no reason. :/02:15
OerHeksjust click on translate in google or bing. but basicly i think it is pretty readable.02:15
deweydbtrying to add a new user on a new ubuntu installation. i did: adduser deweydb sudo, but it gives me: adduser: The user `deweydb' does not exist.02:15
the_countBashing-om: ~02:16
daftykinsRoundDuckMan: i don't think that believing in particular social nuances makes concerns about ones computer software installation more or less justified. run a "sudo apt update && sudo apt dist-upgrade" then be happy :)02:16
k1l_RoundDuckMan: the 4.2 kernel in 14.04 is meant for testing purposes until it becomes part of the stable enablement stack for 14.04.402:16
the_countBashing-om: I'm not upset or anything02:16
daftykinsBashing-om: i don't think anyone really wants to try to dent the armour on my cookie suit anyway ;)02:17
k1l_RoundDuckMan: and maybe you installed other software that changed that settings?02:17
RoundDuckMandaftykins: Well how still that ibus crashes, plus I'm using 4.2 kernel because 3.19 and 3.13 has flaky Intel Wifi connections.02:17
OerHeksyou should tell that in your Q on askubuntu :-)02:18
RoundDuckManand that I'm a little lazy to delete the 3.19 kernels so I can use 3.16 by default, lol.02:18
daftykinsRoundDuckMan: who knows. 2am now though so i'm afraid it's beyond my time to consider looking into it - plus i don't like to deal with modified systems02:18
daftykins3.16 should definitely be removed.02:19
Bashing-omthe_count: read http://www.techblo.gg/?p=301 and offer your comment, please .02:19
the_countOerheks, daftykins, Bashing-om: There is things like this: http://askubuntu.com/questions/367963/ubuntu-on-lenovo-yoga-2-pro which I don't follow all the instructions because I don't understand them fully... acpi_backlight for instance02:19
RoundDuckManWhat's wrong with 3.16? Isn't it supported until 2016?02:19
the_countBashing-om: You want me to post a comment?02:19
daftykinsutopic is ancient, i'd kill it with fire. support status doesn't concern me02:20
RoundDuckManPlus how is 4.202:20
RoundDuckManis testing and not finished when it's in wily02:20
the_countBashing-om: You see... I never understood what I was doing02:20
daftykinswant 15.10's kernel? install 15.1002:20
daftykinsor wait for the (proper) wily HWE for 14.0402:20
the_countBashing-om: So, let's reverse what I just did02:21
RoundDuckManUhh, ok.02:21
Bashing-omthe_count: I am tired .. do not want to do this any longer . please read the link . and decide what you want to do ... I have seen similar in several places . We pick this back up at a later time .02:21
the_countBashing-om: Ok :D Sleep well02:21
RoundDuckMandaftykins: So basically you're saying that because I'm using a different kernel, ibus crashed and icons rearranged?02:22
OerHeksthe  change to systemD might be your issue, using a wily kernel on trusty.02:22
daftykinsRoundDuckMan: no i'm saying because your setup is non-standard and because it's my bed time, i can't help you tonight02:22
RoundDuckMandaftykins: sorry for bugging you then.02:22
OerHeksi guess kernel rollback is the fix. but not for your wireless :-(02:23
daftykinscan always drag back a newer iwlwifi perhaps02:23
OerHekstrottle it back to 54 mbit. might be an option, ugly.02:24
regeditif someone released a .deb (without PPA sadly) and then released another .deb (also without PPA) is it necessary to uninstall/reinstall, or can i just overwrite?02:25
regediti.e. install over the previous one02:25
daftykinsregedit: i'd remove then install for sure, backing up configs before, too02:26
wafflejock1regedit: did that recently with vagrant here and didn't have a problem just installing over the previous, probably wouldn't hurt to remove it first but I believe it's just unpackaging the files into place and running any post extract scripts02:26
OerHeksregedit, if the upgrade specs are followed, no.02:26
RoundDuckManI'm just worried that when I install an OS myself, that I accidentally install some hacked version, so I obsess over md5 and sha 1/256 sums, freak out, and even when I know things are fine, then with all the Linux malware and vulnerabilities being reported, I freak out even more, and then I just then go back to Windows because at least I know it pr02:26
RoundDuckManobably got installed in right by a well known company, unless it's Leveno. :P02:26
RoundDuckManAnd then02:26
regedit(wow) ok thanks for the answers guys02:26
RoundDuckManCrap, pressed enter on accident again02:27
RoundDuckManAnd then I begin worrying about Windows stuff too, then I just begin not using my PC for months, and just use my basic phone or maybe console. :(02:28
RoundDuckMan*basic phone as in weak smart phone02:29
on2I just upgraded to 15.10 and now my Firefox is flaky02:31
on2I get apparmor denied errors for one02:32
on2plugin_container segfaults from Chrome_ChildThr02:32
AlexQI installed lighttpd and I want to set document-root to a mounted NTFS drive, but when I do it in lighttpd.conf, I can't access any files - I get 403 - access denied. No idea why, really. Any quick fix?02:33
lotuspsychjeon2: file a bug mate02:33
the_countOk.... Goodnight all02:34
lotuspsychjeon2: or try to create a new user, test firefox from there02:34
wafflejock1AlexQ: sounds like perhaps the http process doesn't have read privileges for the NTFS drive, might be an issue since the NTFS drive won't have Unix friendly permissions02:34
on2lotuspsychje, yes that may be it...maybe I have to get rid of my rc files02:34
AlexQwafflejock1: But when I go to the NTFS drive everything has 777 mods...02:34
AlexQwafflejock1: I had a similar setup on my 15.04 installation without problems. NTFS is mounted as /media/alex/Label02:35
AlexQwafflejock1: But maybe that is related to the userspace mouting of the drive? I'll check what happens when I use mount myself02:36
AlexQWhy can't I "su www-data" ? Is that user somehow locked? I wanted to check if I can access that drive as www-data or not.02:38
lotuspsychjeon2: same on new user?02:38
on2It was OK until this damned "Use Reader View!" popped up02:38
on2oh well...I am using chromium which has been fine...I'll see how it goes02:38
lotuspsychjeon2: got the right graphics driver enabled?02:39
AlexQMy drive is mounted as "/dev/sda5 on /media/alex/Dane type fuseblk(rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)"02:39
on2It was working on 15.0402:39
on2For months02:39
AlexQThere is "allow_other" there02:39
AlexQjust double-click automount. What the hell?02:39
lotuspsychjeon2: upgrades can get tricky sometimes02:40
daftykinsAlexQ: then you can't not as uid and gid 002:40
daftykinspermissions 101 :)02:40
lotuspsychjeon2: try launch firefox from terminal, see what errors you getting02:41
=== Guest49618 is now known as bewbs
AlexQdaftykins: Sorry, lost there - don't know what these fuseblk parameters mean precisely - the owner of all the files? drwxrwxrwx 1 alex alex 24576 lis 23 03:17 Dane. Isn't uid 0 guid 0 root root?02:42
daftykinsyeah so if mounted with root perms, www-data can't touch it02:43
daftykinsunless ownership etc are adjusted and honoured02:43
docmurIs there away to turn on the ability for totem to resize?02:43
AlexQdaftykins: But it is mounted just by double clicking on the drive icon on the desktop, no root involved.02:43
=== xubuntu is now known as Guest58418
on2lotuspsychje, (firefox:20988): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.02:43
xreesigerAlexQ: yeah I hate that to.02:44
daftykinsAlexQ: not good02:44
Guest58418hi, I'm having horrible install trouble of 14.04.3. The installer fails every time with"We're sorry, the installer crashed". I've tried 3 different USB flash drives, two different target hard drives, done memtest, checked ISO hash. what's going wrong?02:44
xreesigerGuest58418: download it again02:45
Guest58418log output: http://pastebin.com/S8Cz6h0802:45
lotuspsychjeGuest58418: crash at wich point?02:45
Guest58418near the end02:46
xreesigerYou using 64 on 32 machine02:46
AlexQdaftykins: Not good? You mean I need to use /etc/fstab? I don't mind the mouting being temporary, it is just to stream some vids on my smartphone, just the easiest wya02:46
lotuspsychjeGuest58418: how did you create the usb02:46
Guest58418it's 64 bit02:48
Guest58418I created disk using dd02:48
Guest58418the disk creator doesn't work02:48
daftykinsAlexQ: then copy the files?02:49
daftykinswhat's the file system on said disk?02:49
AlexQdaftykins: NTFS02:49
Guest58418like: dd if=filename.iso of=/dev/sdb bs=1M02:49
AlexQdaftykins: I did it before on 15.04 without any issues, the very same partition mounted from userspace, no /etc/fstab entry.02:50
Walfacan backbox have the same repo as ubuntu?02:50
AlexQdaftykins: My /etc/lighttpd/lighttpd.conf: http://paste.ubuntu.com/13467231/02:50
daftykinsAlexQ: well that's not what i'm saying, but the file ownership on the path you're trying to access from your chosen web server02:50
daftykinsnope not important; "ls -al /path/to/mounted/disk/"02:50
AlexQdaftykins: http://paste.ubuntu.com/13467335/02:52
AlexQdaftykins: And when I do http://localhost/test.txt I get HTTP 40302:52
daftykinsyour lighttpd runs as which user?02:53
AlexQdaftykins: Just can't get my head around that. Maybe lighttpd doesn't allow access to files of other users' files even if their permissions allow that?02:53
daftykinsso then that test file needs to be owned as www-data:www-data ; or www-data needs to be a member of group 'alex'02:53
daftykinsthough you tried to 777 haha02:54
AlexQdaftykins: Why if the permissions are rwxrwxrwx everywhere. I didn't do it, it was like that automatically.02:55
daftykins1) does it hurt to try 2) do you have a better idea? 3) sharing from NTFS = you're gonna have a bad time :)02:55
daftykinsanyway i have to leave now, so can't check your server config02:55
AlexQCould I try to run the server as myself? alex alex in lighttpd.conf?02:56
AlexQOr then the server wouldn't have permission to open sockets i.e. listen on 80?02:57
GuestHi Folks - I don't know if this is the right place to ask, but I am having difficulties with Komposer.  When I load one of my webpages into it, at first the page looks fine, but if I try to scroll down, the page becomes split into "strips" which overlay each other and blink constantly, about twice a second.  This only started happening recently with Komposer, and ONLY occurs with Komposer, no other software on my computer.  Any ideas/su02:58
daftykinsAlexQ: not my personal favourite, but knock yourself out ; fwiw i think what you're doing is heavily flawed02:58
AlexQdaftykins: LOL, it works. But only after I gave 777 mods to /var/log/lighttpd :D03:03
daftykinshaha, sounds like the server couldn't even start from having no write perms to its' log path03:05
daftykinsdon't use 777. ever.03:05
AlexQdaftykins: But I think it is ugly, obviously. Yeah, I guessed that. Well, these are only logs03:05
AlexQdaftykins: I think maybe lighttpd limits access to files in www-data by default, group even if their mods allow access to them. There was some message about users-something when installing (?)03:07
lotuspsychjeAlexQ: maybe the ##httpd guys might also know?03:08
AlexQWell, lighttpd maybe03:08
AlexQcause the way it is now is ugly03:08
AlexQactually it's #lighttpd03:12
cdshanHello, I am trying to upgrade from ubuntu 14.10 to 15.04, I followed the instruction on https://help.ubuntu.com/community/VividUpgrades, when I do a dist-upgrade, it says there is no upgrades. Could some one help me with this.03:12
cdshancould some one help me out with the upgrade from Ubuntu 14.10 to 15.04? I had tried the documentation available on the net but am not able to succeed.  some inputs would be very much appreciated!03:16
cdshanI had been at it for almost a week, without any success.03:17
AlexQHow do I mount an NTFS drive so that everyone has read permissions to it?03:18
Ben64cdshan: why do you want to?03:18
cdshanBen64: because, ubuntu 14.10 is no longer supported with updates03:19
lotuspsychjeAlexQ: ask your issue in ##httpd they have more experience for this03:19
Ben64cdshan: whoops my mistake, read that as 14.04 to 15.0403:19
Ben64!eolupgrade | cdshan03:20
ubottucdshan: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades03:20
AlexQlotuspsychje: Is ##httpd for Apache only or all http daemons?03:20
AlexQdaftykins: Well, I think it is related to the NTFS drive though, you were right that these permissions are messed up. I reverted lighttpd.conf to original settings running it as www-data www-data, made a folder in my home directory, with read permissions, made a test.txt file inside it and it is accessible via HTTP. Strange though03:21
lotuspsychjeAlexQ: they have more experience in all kind of daemons03:21
lotuspsychjeAlexQ: daftykins is afk03:21
AlexQI know, just saying for future reference03:22
cdshanubottu: I tried the links you provied, after the initial updates to the existing version, it says no new updated found, even a dist-upgrade does not work03:24
ubottucdshan: I am only a bot, please don't think I'm intelligent :)03:24
=== debian is now known as Guest58620
Guest58620gsharkdown download and install the package should enable permission to run it as a program, opening gives me the following error,03:25
Guest58620GrooveShark service has probably changed!03:25
Guest58620gSharkDown will not function properly, so please be patient until we find a solution.03:25
lotuspsychjecdshan: try a clean install mate03:26
Guest58620how I do03:27
cdshanlotuspsychje: I just wanted to see if there is a way to upgrade rather than a clean install from the scratch03:27
lotuspsychjecdshan: upgrade from eol is always a risk mate03:27
Ben64cdshan: did you change your repositories03:27
lotuspsychjecdshan: you dont know what intruded in your system as security holes03:28
cdshanBen64: do you mean from the old..... back to utopic?03:28
Ben64cdshan: no.. like it says in the link to old-releases.ubuntu.whatever03:29
cdshanBen64: I did that and all the instructions that follow it.  A few updates were installed and then when we do an upgrade, its says there are no upgardes03:30
=== alek is now known as Guest94305
Ben64cdshan: did you do "sudo apt-get update" "sudo apt-get dist-upgrade" and "sudo do-release-upgrade"03:30
cdshanlotuspsychje: I do understand your concern, will do a clean install if all else fails.03:30
AlexQdaftykins: Hahaha, I know why. Because permissions for /media/alex are drwxr-x---+03:31
cdshanBen64: yes all of those03:31
Ben64cdshan: run them again, and pastebin the output03:31
cdshanBen64: give me a moment03:31
nitishHow can I download gnome-tweak?03:32
lotuspsychjenitish: sudo apt-get install gnome-tweak-tool03:33
AlexQdaftykins: chmod o+rx /media/alex and now it works well. Are these mods for user-media dir intentional? Even as Ubuntu mounts using allow_others flag by default? Maybe that's a bug?03:34
lotuspsychjeAlexQ: daftykins is afk, spare it until he's back03:34
Ben64AlexQ: you should add it to fstab and have it mounted somewhere not in /media/you03:34
AlexQBen64: It is a single-user laptop setup, just for sharing files, so I think it is allright. Just wondering if it is intentional to have such mods for /media/user ?03:35
Ben64AlexQ: why are you sharing files with a http server03:36
AlexQStreaming videos in LAN03:37
nitishlotuspsychje: thanks.03:37
nitishcan I make terminal transparent in gnome-shell 3.10.4?03:37
lotuspsychjenitish: terminal profile settings03:37
AlexQBen64: Behind NAT, so nothing risky I guess.03:37
nitishlotuspsychje: i can make terminal transparent in default ubuntu ui(unity) but unable to do it in gnome-shell.03:38
lotuspsychjenitish: maybe the #ubuntu-gnome guys know03:39
nitishHow can I add new workspace?03:41
AlexQnight night03:44
nicolas_leonidasWhen I type docker I get a message that docker is not installed, when I wanna install it with apt-get it says latest version is installed03:45
nicolas_leonidaswhat's the problem?03:45
LambdaComplexnicolas_leonidas: is it in your path?03:45
cdshanBen64: the output of the dist-upgrade http://pastebin.com/uEJu4S9P03:45
nicolas_leonidasLambdaComplex: problem is I don't know where it's installed so I can't check03:46
LambdaComplexnicolas_leonidas: hm...try `whereis docker`03:47
nicolas_leonidaswow, that's a new command? output =>  docker:03:48
cdshanBen64: I could post the sources.list file if you want on pastebin03:48
LambdaComplexnicolas_leonidas: eh, it only works for stuff in your path though...which it apparently isn't03:48
LambdaComplexnicolas_leonidas: okay, try `find / | grep docker`03:49
nicolas_leonidasI think I found what the problem is, the package is docker.io not docker http://www.liquidweb.com/kb/how-to-install-docker-on-ubuntu-14-04-lts/03:50
Bashing-omcdshan: I find it best to revert all PPAs to repo versions . Won't hurt to check your sources .03:50
cdshanBashing-om: http://pastebin.com/d5wgce6n03:52
Bashing-omcdshan: Look'n .03:52
Bashing-omcdshan: Looks good so far; anything on the 3rd party directpry ' tail -v -n +1 /etc/apt/sources.list.d/* ' ?03:54
cdshanBashing-om: http://pastebin.com/FZdj7xAN03:58
nitishIs there any other ui available in ubuntu like gnome-shell?03:58
Ben64cdshan: so 15 minutes after i asked, you pastebinned 1/3 of what i asked for?03:59
Bashing-omcdshan: I be a while checking all those . be back soonest .03:59
cdshanBen64: I had been doing it one by one, by the way, what are the other two you wanted me to pastebin?04:01
OerHekswow, lot of ppa's ..04:01
Ben64cdshan: mixing 13.10, 14.04, and 14.10 repositories isn't a good idea04:01
Ben64Nov 22 2015 19:30:50 <Ben64>cdshan: did you do "sudo apt-get update" "sudo apt-get dist-upgrade" and "sudo do-release-upgrade"04:02
cdshanyes, I could pastebin the output of all the three now04:02
Ben64you couldn't before?04:03
LambdaComplexnitish: you can install any desktop environment/window manager that you want...04:03
ubottuA desktop environment is what "puts the pieces of a !GUI together". The available desktop environments in Ubuntu are !GNOME (ubuntu-desktop), !KDE (kubuntu-desktop), !Xfce (xubuntu-desktop), !LXDE (lubuntu-desktop), IceWM, !Fluxbox, WindowMaker (wmaker), FVWM and others - See also !Flavors04:03
nitishLambdaComplex: can you please give me some examples of desktop environment/window manager which are available.?04:04
nitishCurrently I've unity & gnome-shell.04:04
LambdaComplexnitish: Off the top of my head? KDE, XFCE, and LXDE. Cinnamon should work just fine as well.04:04
LambdaComplexi3 and BSPWM are both good choices for tiling window managers.04:05
Bashing-omcdshan: Ben64 : Shold not this " http://download.opensuse.org/repositories/isv:/ownCloud:/desktop/ Ubuntu_14.04/ / " be edited to " Ubuntu_15.04/ / ? It is supported in 15.04 .04:05
LambdaComplexOerHeks: You win a <3 from me04:05
LambdaComplexOpenbox is good if you want a standalone stacking window manager04:05
LambdaComplexAnd, just to name some more window managers because I feel like it...DWM, ratpoison, twm, wmutils, herbstluftwm, awesomewm, xmonad04:06
OerHeks... mate :-D04:06
LambdaComplexShit, how did I forget mate?04:06
cdshanBashing-om: I could uninstall that App as I am not using that at the moment04:06
* LambdaComplex begs for forgiveness from the gtk2 gods04:07
ubottu!Ubuntu-GNOME, !Kubuntu, !Xubuntu and !Lubuntu are simply flavors of Ubuntu that come with GNOME, KDE, Xfce, and LXDE (respectively) installed as default, instead of Unity. Other specialized flavors of Ubuntu include !Edubuntu, Ubuntu !Studio, and !Mythbuntu.04:07
OerHeksno mate-desktop there either..04:07
LambdaComplexOerHeks: I named all those already :P04:07
LambdaComplexOoh, how about LXQT? Is that still a thing?04:07
Ben64cdshan: try "do-release-upgrade -d" and maybe you should stick to LTS versions so you don't have to upgrade so often04:08
Bashing-omcdshan: It is supported, so should not present a problem .. however, I can not verify " deb https://private-ppa.launchpad.net/commercial-ppa-uploaders/allvideodownloader/ubuntu saucy main " I have no authorization to access. Should this not also be 'utopic' ?04:08
LambdaComplexOh, and I imagine Pantheon would work too04:09
cdshanBen64: do-release-upgrade -d also produces that same result, " No new release found"04:10
cdshanBen64: I do agree with you suggestion of hence fourth sticking to LTS, but I need to get out of this to do that in future.04:11
Bashing-omcdshan: Ben64 ;; check what is set in update-manager ' cat /etc/update-manager/release-upgrades ' ?04:12
cdshanBashing-om: http://pastebin.com/GehcabCz04:15
cdshanBen64: http://pastebin.com/GehcabCz04:16
Bashing-omcdshan: Humm .. " Prompt=normal " is correct for this situation .. I am out of ideas now .04:18
cdshanBashing-om: thank you for your time, hope I will get some solution04:20
Bashing-omcdshan: Sorry that I am no more of help . Best wishes .04:22
=== Don is now known as Guest73615
KartagisI haven't wifi after my laptop returns from hibernation. help?04:29
jimm398[15:31] <jimm398> So im using KVM and I'm trying to passthough onboard intel sata the problem is it is not in its own IOMMU group. It is in the group with the ISA Bridge and the SMBus. Does anyone know what these pci devices do? What would be the disadvantage of disabling them?04:32
=== xubuntu is now known as Guest90978
ziesemerI have all of these *.pid files showing up in my home directory.  E.g., upstart-udev-bridge.10317.pid .  Surely this isn't normal?04:35
Guest90978it's me again still having a total nightmare getting xubuntu installed. I am running out of ideas. Constantly different errors. This time it's "ubiquity[7509]: segfault at 57177000 ip 08213eab sp bfb0e040 error 4 in python3.4[8048000+331000]" after selecting what to install04:36
we6jbo2I'd like to install ubuntu or debian over a lenovo h50 running windows 10 removing windows 10. Are there any tips on how to do this?04:36
Guest90978things I've tried so far:04:36
Guest90978redownloading image04:36
Guest90978using i386 instead of amd6404:36
karexHi, http://manpages.ubuntu.com/manpages/maverick/man8/timeoutd.8.html says there's /etc/timeouts file, but I can't find it04:37
Guest90978using different USB flash drive04:37
Guest90978using different target hard drive04:37
SeriouslyLaughwe6jbo2 the installation process is pretty straight forward, especially if you aren't trying to dual boot04:37
SeriouslyLaughlet me see if i can find a tutorial for you04:37
Guest90978using mkusb, dd and startup disk creator to create bootable USB disk04:37
SeriouslyLaughwe6jbo2 https://help.ubuntu.com/community/Installation04:37
Guest90978running memtest on target machine (no errors)04:38
Guest90978at this point I am wondering if something is wrong with the machine itself. has anyone had something like that?04:38
karexWhere is /etc/timeouts in Ubuntu?04:38
SeriouslyLaughwe6jbo2 that tutorial mentions burning s DVD but most computers can boot from a USB stick if you have one laying around04:38
Guest90978over the years I have installed xubuntu on dozens of machines and never had this kind of trouble04:39
truerockUsing a USB stick does tend to speed the process along a bit.04:39
SeriouslyLaughGuest90978 have you checked for a crash file in /var/crash ?04:43
SeriouslyLaughi haven't had any experience with segfaults but google leads me to mostly bug-related items04:43
ubottuLaunchpad bug 924456 in ubiquity (Ubuntu) "ubiquity panel crashed with a segfault during oem-config-remove step" [Undecided,Invalid]04:44
ubottuLaunchpad bug 710582 in webkit (Ubuntu Natty) "webkit crashes on amd64 architecture with SIGSEGV in WTF::OSAllocator::reserveAndCommit()" [Critical,Fix released]04:44
clorisuhi, it seems my archive file is broken. Does anybody know what went wrong with this archive file? http://imgur.com/a/5ibqx (First image is the main directory, following two are the subfolders) -- When I transferred it originally it was just the 108.MOV file which was 3.7GB, but it split into that weird encryption folder which is 3.7GB and the 108.MOV is now 0 bytes? Is there a way to fix this, if not is there a way to recover just a portion of the data inst04:45
clorisuead of the whole so the video is somewhat watchable?04:45
SeriouslyLaughi dont know much about that but it looks to me like the file has become corrupt04:46
SeriouslyLaughwhere did you copy the original file from clorisu04:47
SeriouslyLaughwas it an internet download or a transfer from a USB device? for example04:47
clorisuSeriouslyLaugh: i compiled the archive myself from my ext4 drive04:48
clorisuSeriouslyLaugh: but that original file is long gone04:48
SeriouslyLaughColdKeyboard what command or software did you use to create the archive?04:48
yigalI sometimes wonder why, why isn't irc more heavily used04:50
clorisuSeriouslyLaugh: I right clicked the file and clicked 'create archive', it uses the program file roller04:51
SeriouslyLaughclorisu are you able to browse the contents of that folder?04:52
SeriouslyLaughor does it spit out an error when you try to navigate04:52
yigalclorisu: do you want to use another program other than file roller?04:52
macrover2015-11-22 20:47 <SeriouslyLaugh> was it an internet download or a transfer from a USB device? for examplexk04:53
yigalhmm what's the issue :)04:54
SeriouslyLaughi'm seeing bug reports related to this type of behavior from back as far as 200904:54
SeriouslyLaughlet me see if anyone posted a solution04:54
yigalowell I'll wait for my own bug, one will come someday :)04:55
clorisuSeriouslyLaugh: I can't load the video file from within the archive, or extract it. i get the same error "error occured while extracting files. encrypted file is unsupported". I believe when I tried on windows it said headers were broken.04:56
clorisuyigal: I dont mind what program I use, but ive lost the original file the archive was made out of and im just trying to recover whatever data i can from the archive04:56
yigalclorisu: what do you get when you type 'xdg-mime query filetype <file name> ?04:57
yigalexcuse me '04:57
clorisuyigal: application/x-compressed-tar04:57
yigalclorisu: so it's a tarred archive apparently04:57
yigalSeriouslyLaugh: take it from here04:58
SeriouslyLaughbut it's almost certainly encrypted04:58
SeriouslyLaughunfortunately i this is out my comfort zone04:58
SeriouslyLaughi dont have a solution, sorry04:58
=== derrick is now known as Guest99186
yigalSeriouslyLaugh: ok I'll try some hand waving see if we get any further04:58
SeriouslyLaughgood luck04:59
clorisuthanks anyway SeriouslyLaugh and yigal. would you expect its possible to be fixed if i found the right person to help?04:59
clorisuok thanks yigal04:59
SeriouslyLaughclorisu maybe look around for a general linux support channel04:59
SeriouslyLaughi know if ##linux obviously but i'm unsure how they feel about tech support quesitions04:59
yigalclorisu: when the file is opened with file roller when you try to extract it what happens?04:59
clorisuyigal: when i try to extract it with the command line or the file roller?05:00
yigalclorisu: prob. best if you give the error on the command line, 'tar xf <file name>.tar' ?05:00
=== dkemp1976 is now known as pegazus
clorisugzip: stdin: encrypted file -- use unzip05:01
clorisutar: Child returned status 105:01
clorisutar: Error is not recoverable: exiting now05:01
clorisu@ yigal05:01
quidnuncCan anyone tell me how to launch vmware on 15.10?05:02
quidnuncworkstation 1205:02
yigalclorisu: hmm ok were you given any idea how the files was encrypted?05:02
quidnunc"vmplayer" just silently exists05:02
trugreentake a shutgun and point it at your head05:02
trugreenthats how you start it05:02
yigalclorisu: also what is the output of 'file <file>'?05:02
clorisuyigal: wouldnt have a clue. i didnt intentionally encrypt it, maybe the camera did? but i dont think it does usually. not in the way that i can see those encryption characters anyway. but i just compiled the tar from the single mov file05:03
clorisuyigal: NYE2.tar.gz: Zip archive data, at least v2.0 to extract05:03
yigalclorisu: what command are you using on the command line, 'tar xfz <file>' ?05:03
yigalclorisu: it's tarred and gunzipped05:04
clorisuyigal: clorisu@clorisu ~/Desktop $ tar xfz NYE2.tar.gz05:04
yigalclorisu: cool05:04
yigalclorisu: so what application generated the file, was it from a phone, or webcam?05:04
clorisuyigal: a canon dslr camera05:05
yigalclorisu: did you hack the camera, is it using the open source stuff?05:06
yigalclorisu: http://chdk.wikia.com/wiki/CHDK ?05:06
yigalclorisu: it's odd that it would be a tar gz file05:06
yigalclorisu: if you're ok with the idea share a dropbox, or other link with the file, I'll certainly take a look what might be going on05:07
clorisuyigal: i dont think i changed the camera and not sure if its open source. it just produces a .mov file and im fairly sure i just made the archive out of that05:08
clorisuyigal: its 1.7gb so may take me a bit to upload, but ill do it05:09
yigalclorisu: cool, so I'm guessing it's a raw file?05:09
=== joseph is now known as Guest66089
django_how do i use computer cam05:10
django_laptop webcame05:10
django_on ubuntu05:10
yigalin chains05:10
django_to take a picture05:10
yigalsorry dude I had to05:10
yigaldjango_: if you have a Ubuntu install you can use the default application Cheese https://wiki.gnome.org/Apps/Cheese05:11
django_yigal: ty05:11
django_yigal: you israeli?05:11
yigalnah, just two Jews for parents :)05:12
clorisuyigal: by raw you mean unedited? if so yes05:12
yigaldjango_: lol, just let me know if it works?05:12
django_why does every israeli on the net say that :D05:12
yigaldjango_: my dad was born in Oakland California and my mom was born in England05:12
django_and you?05:13
django_..let me guess05:13
yigaldjango_: they married in Israel and moved to the US had me in Seattle05:13
django_oh heh05:13
yigalyou're wrong05:13
yigalanyways let me know if Cheese works05:14
django_works hah05:14
yigalcool :) !05:14
django_the problem ive been having with ubuntu 14.04 is speed :(05:14
=== pegazus is now known as devon
django_it takes a couple of minutes just to log out05:14
clorisuyigal: by raw you mean unedited? if so yes05:14
django_and it has been progressively getting slower..05:14
yigalclorisu: yes dude, sorry for not answering earlier05:14
django_these problems are so ambigous i cant find a soln :/05:14
VictoriaXOXOQ: What is wrong when a program just won't start? "Gnome Encfs Manager" does nothing when I click on it. Any ideas?05:14
clorisunp yigal just repasted incase you missed it05:14
green-hatI ran into a small problem, Id appreciate the help if anyone has the time. I have Windows 10 as my primary partition, and Xubuntu installed along side it. I set it up so Xubuntu has a root, swap and home partition. I used 10GB for the root partition, but now it says i cannot install anything due to space being an issue. I checked my root folder & the space is maxed out. I thought games and other software would install in the h05:14
green-hatome folder/partition. I tried using Gparted, but i cannot modify/resize the partitions. Should i just reinstall and not make the root and home separate partitions?05:14
yigalclorisu: cool05:15
green-hatSorry for the long message...05:15
yigaldjango_: hmm05:15
yigaldjango_: what kind of hardware are you working with?05:15
clorisuyigal: have a preferred file dropping service?05:15
django_6gb ram05:15
VictoriaXOXOk1l_: I actually did a lot of research on this one. :)05:15
yigalclorisu: google drive or dropbox let me know the link :)05:15
yigaldjango_: what kind of storage ssd or hhd?05:16
django_not sure05:16
yigaldjango_: no worries, do you have a dedicated graphics card or integrated?05:16
truerockYou'd probably know if you had a solid state drive ...05:16
yigaldjango_: just have to find the likely bottleneck05:16
yigaldjango_: and see what might be happenning05:17
SeriouslyLaughVictoriaXOXO try running the program from within a terminal window to see what it says when it's executed05:17
django_yigal: i just have the basic intel graphics card05:17
django_i dont game05:17
django_or use graphic card intensive05:17
django_just chrome/terminal/texteditor05:17
VictoriaXOXOSeriouslyLaugh: Silly question, but what would the command be? :$05:17
SeriouslyLaughnot silly! i was just wondering that myself05:17
yigaldjango_: I'm the same, more or less, so everything just gets painfully slow?05:17
SeriouslyLaughVictoriaXOXO try genfcsm05:18
django_over time it does..so like after a day i have to log out/relog on05:18
django_even now its lagging as i type in words in the chat05:18
VictoriaXOXOSeriouslyLaugh: One moment, please.05:18
django_its only a slight lag that isnt a major issue05:18
VictoriaXOXOSeriouslyLaugh: "anon@pc ~ $ genfcsm genfcsm: command not found"05:18
django_its mostly when i log out it takes forever and overtime it just gets slower05:18
yigaldjango_: you should run 'ps aufx' and see what resources are being used, or even just 'top'05:18
SeriouslyLaughVictoriaXOXO if that doesn't work try gnome-encfs-manager05:18
django_ps top?05:19
yigaldjango_: no, us 'ps aufx'05:19
VictoriaXOXOSeriouslyLaugh: Well, this sure as heck is weird. "anon@pc ~ $ gnome-encfs-manager Using AppIndicator"05:19
VictoriaXOXOSeriouslyLaugh: It works from there?!05:19
yigaldjango_: or 'top' something that will let you see the resources that are being used so you can kill the program as opposed to the session05:19
django_thats what it says ll05:20
yigaldjango_: is it slow right now?05:20
SeriouslyLaughoh I think that means it's an indicator VictoriaXOXO -- there isn't a graphical user interface but rather it would be shown in the system bar area if you had one enabled05:20
django_not too bad05:20
django_i recently relogged that why05:20
django_bc it was going slow05:20
yigaldjango_: yah, the resource usage from the output is minimal05:20
VictoriaXOXOSeriouslyLaugh: Yeah, I see an icon there now. But I was promised a GUI. >:(05:21
yigaldjango_: that's why I ask, when it gets bad take a log of it05:21
SeriouslyLaughone sec let me research this VictoriaXOXO05:21
django_do you usually hang around?05:21
yigaldjango_: cool05:21
yigaldjango_: nah, just when I get drunk :D05:21
yigaldjango_: there are plenty of smart peeps to help05:21
SeriouslyLaughVictoriaXOXO click on the indicator and click "show manager"05:22
yigaldjango_: also if you need help just private message me, I'll do my best to help05:22
VictoriaXOXOSeriouslyLaugh: Yeah, that works. :) Buuuuuuut... I should probably stay away from it. -- https://defuse.ca/audits/encfs.htm05:22
VictoriaXOXOSeriouslyLaugh: I found out AFTER installing it.05:23
django_yigal: the thing is with my old laptop when i switched to ubuntu it went SO MUCH faster tjhing time its not the case :/05:23
django_idk if installted incorrectly?05:23
django_also its ubuntu 14.0405:23
yigaldjango_: yes that's what people usually notice from a swithc from Windows to Linux/Ubuntu05:23
django_not this time /cry05:24
SeriouslyLaughVictoriaXOXO check out some alternatives: http://alternativeto.net/software/cryptkeeper/05:24
yigaldjango_: well Windows is getting better and it certainly depends on the hardware05:24
SeriouslyLaughoops I mean http://alternativeto.net/software/gnome-encfs-manager/05:24
VictoriaXOXOSeriouslyLaugh: I will. So, to uninstall it completely... sudo apt-get purge gnome-encfs-manager?05:25
django_yigal: could it be the installation was wrong05:25
VictoriaXOXOSeriouslyLaugh: Thanks. What do you use?05:25
yigaldjango_: not likely05:25
yigaldjango_: are you currently having issues with the speed?05:25
django_right now no05:25
yigaldjango_: right so there's an application likely with a memory leak, so you need to find it and respawn it when it has issues05:26
django_hows this05:27
clorisuyigal: did you get my link05:27
yigalclorisu: yes, second let me start the download05:28
django_also firefox goes annoyingly slow05:28
memo_your name ?05:28
VictoriaXOXOSeriouslyLaugh: Do you know why this is unavailable? http://blog.sambull.org/easily-encrypt-folders-205:28
yigaldjango_: yah nothing is showing from that general resource search what about 'ps aux --sort=-%mem | awk 'NR<=10{print $0}'' ?05:29
yigaldjango_: that's a search for the top ten memory intensive processes05:29
VictoriaXOXOSeriouslyLaugh: Nevermind. I found a working copy of that post and it's using encfs again. Argh.05:29
yigalclorisu: ok downloaded, let me see what we have05:30
yigalclorisu: love my gigabit connection05:30
django_still doing it05:30
clorisukk yigal :)05:30
django_yigal: still hasnt returned anything05:35
yigaldjango_: you need to have a terminating '05:35
yigaldjango_: at the end of the awk statement05:35
yigaldjango_: {print $0}'05:36
* django_ facepalm05:36
yigaldjango_: ok it looks like chrome is taking up the majority of the resources05:37
nrdbshould a motherboard display something without ether a CMOS batter or HDD?05:37
django_yigal: only 12 tabs opene05:37
yigaldjango_: hmm, what does 'free -m' show?05:38
django_yigal: ^05:38
yigaldjango_: ok so the memory looks fine05:38
yigalmost of it is being used but most of it is being cached, as expected05:39
yigalclorisu: From my test I suspect this is a corrupted archive05:40
yigalclorisu: I would attempt to download from the source again, if this is possible05:41
yigaldjango_: I would consider creating a cron job every 5-10 minutes for 'ps aufx' so when the performance is getting bad the logs are available to see what might be happenning05:43
django_cron job?05:43
yigaldjango_: something like https://github.com/rackerlabs/recap05:44
yigaldjango_: if that's confusing just run the command, ps aufx > log.txt' when the system gets bad05:45
yigaldjango_: 'ps aufx > log.txt' excuse me, and then when complete sign out05:46
clorisuyigal: I can't access the source as the mov file was from my camera 2 years ago and the source is lost. is there any way to recover just some of the data so some of the video is watchable?05:46
SeriouslyLaughclorisu check this out http://ubuntuforums.org/showthread.php?t=86176305:49
mekhamiwhat's your preferred terminal email client?05:49
mekhamii'd prefer something with vim keybinding support or editing in vim05:49
yigalclorisu: So either the archive is password protected or it's corrupted, it's hard to be sure05:50
yigalclorisu: do you know what the passwords would/could have be to unlock the file?05:51
clorisuyigal: i have a feign memory of maybe password protecting it. i would probably still remember the password if it would help05:51
yigalclorisu: it likely will in this case05:52
clorisuyigal: hopefully :)05:52
clorisuSeriouslyLaugh: thanks ill look into it05:52
yigalclorisu: yes, I hope so :)05:52
yigalclorisu: I mean just running a few basic commands seems to show that indeed it is encrypted with a password, https://gist.github.com/8leggedunicorn/7d637fea2b7e06fa504b05:54
clorisuyigal: i dont understand that log but ill take your word for it :)05:55
truerockInteresting ... could explain the incomplete decompress, yeah.05:55
clorisuyigal: the extra folder that appears has what typically looks like encryption for me anyway. http://imgur.com/a/5ibqx05:56
yigalclorisu: good luck sir, encryption or odd encoding, but likely encryption05:59
clorisuyigal: how do i go about decrypting it with the password?05:59
yigalclorisu: if it is a zip file you can use 'unzip' with the -P flag 'unzip -P <password> <file>'06:00
truerockApparently, it's a tar.gz file.06:00
truerock(If I remember the previous convo correctly.)06:00
yigaltruerock: possibly although file shows it as a zip archive: NYE2.tar.gz: Zip archive data, at least v2.0 to extract06:01
truerockahhhhh ... indeed.06:01
clorisuyigal i just get the same results i get with unzip by itself http://pastebin.com/tBYXkESD06:01
=== gerald is now known as Guest74381
=== test is now known as Guest12497
yigalclorisu: I'm at a loss sir, I think you should likely take it to ##linux or a stackoverflow post06:06
clorisunp yigal thanks for all your help.06:06
yigalclorisu: np, gl06:06
loggloghey ppl how can i resize a photo without downloading gimp for it, on a fresh ubuntu install06:07
=== Guest12497 is now known as Ubuntu-Lucknow
logglogone more question ppl, i is it possible to make the launcher act intelligent. When I put firefox to maximize that it hides and expands firefox to full. While showing if there is nothing maximized06:09
al2o3-crlogglog: use convert06:11
al2o3-crlogglog: Use the program convert to resize your photo06:13
logglogthere is no convert when i search for it, do i have to install it first?06:14
EelsHi, is there a way to change to a different video driver from the command line?06:14
EelsMy video driver is blocking my boot06:14
al2o3-crlogglog: it's a CL tool06:15
al2o3-crubuntu comes with it06:15
logglogsorry i am newer to linux :) thx06:15
vipinGhi all06:19
vipinGi have install newly ubuntu  15.05 version and able to access my internet through browser but when i am trying update via terminal , terminal not getting network06:20
vipinGcan any one suggesss06:20
vipinGi have install newly ubuntu  15.05 version and able to access my internet through browser but when i am trying update via terminal , terminal not getting network06:22
vipinGi have install newly ubuntu  15.05 version and able to access my internet through browser but when i am trying update via terminal , terminal not getting network06:23
emitattuovipinG, do you have a proxy?06:23
vipinGyes i have proxy06:23
vipinGalso tried proxy setting06:24
vipinGbut still no network06:24
SeriouslyLaughvipinG can you ping your router?06:24
SeriouslyLaughdisable all proxy settings and try to ping the router06:24
vipinGbasically i have installed my ubuntu in windows host with virtual box06:27
vipinGi m in my company network environment how to find my router ip in via terminal06:27
goddardhow can i activate USBMon in Ubuntu 14.0406:28
vipinGSeriouslyLaugh , i am not able to ping my router ip06:29
vipinGbut from windows host m/c i can ping my router06:30
OerHeksgoddard, kubuntu guide, works for unity too https://wiki.kubuntu.org/Kernel/Debugging/USB06:30
SeriouslyLaughvipinG sounds like it may be related to the virtualbox settings06:30
SeriouslyLaughmaybe try the bridged NAT option06:30
vipinGSeriouslyLaugh , i m using bridge option06:31
goddardOerHeks: sweet thanks06:31
SeriouslyLaughthen try another option vipinG06:31
vipinGthat also not working06:31
SeriouslyLaughunder network, choose NAT for "attached to"06:32
vipinGSeriouslyLaugh , i am not getting one thing then how linux browser getting my network properly06:32
EelsMy Ubuntu 14.04 freezes after I login (only cursor and background visible). I'm trying this http://askubuntu.com/questions/449479/ubuntu-14-04-lts-crashes-after-login but I can't boot into recovery mode.06:32
SeriouslyLaughwhat command are you using in terminal that isn't workin vipinG06:32
vipinGSeriouslyLaugh , sudo apt-get update06:33
iBurleyAnybody know if it's safe to install the AMD proprietary video drivers from the GUI tool in 15.10 yet?06:35
SeriouslyLaughvipinG disable proxy settings and try it06:36
=== prosodyCagain is now known as prosody
vipinGSeriouslyLaugh , already tried with and without proxy06:40
SeriouslyLaughvipinG your company might have some kind of networking protection in place06:41
SeriouslyLaughmore info here http://askubuntu.com/questions/308809/no-internet-for-terminal-connect-through-a-proxy06:41
SeriouslyLaughvipinG other things i found via google: http://ubuntuforums.org/showthread.php?t=197890306:43
SeriouslyLaughand this http://superuser.com/questions/455273/ubuntu-12-04-terminal-has-no-internet-proxy-server06:43
SeriouslyLaughmore http://superuser.com/questions/496183/unable-to-connect-to-internet-from-terminal-on-ubuntu-12-0406:43
vipinGSeriouslyLaugh , i have changed some virtual box config now i am able to ping my router but still not getting neteork06:44
SeriouslyLaughvipinG read the links I posted06:45
SeriouslyLaughvarious solutions to try06:45
vipinGSeriouslyLaugh , Thanks06:46
SeriouslyLaughEels when you say freezes, do you mean it doesn't load? can you still move the cursor around?06:48
SeriouslyLaughor does it stick completely06:48
EelsI can move the cursor and see the desktop background, but there or no panels06:49
EelsAfter a few reboots I managed to open the terminal06:49
SeriouslyLaughEels read this solution: http://askubuntu.com/questions/17381/unity-doesnt-load-no-launcher-no-dash-appears06:49
Eelsbut ifconfig says I have no wifi06:49
clorisuok yigal, i think you were on the right track with jar because it overrides or disregards the signature error. but why you got your output is probably due to it being an encrypted file right? so is there a command to run that jar extract but with a password option06:51
EelsI tried apt-get installing compizconfig-settings-manager, but it fails to resolve anything at all06:51
=== michael__ is now known as Guest97040
Eels"Network is unreachable" when trying to ping anything at all06:53
dustin_anyone else up?06:56
dustin_I'm having an issue trying to update a EOL version of ubuntu on a server.06:56
skweekI want to take my ubuntu usb key and let it boot and point it to another usb key with a minimal home folder clone of my current home partition, any suggestions?06:57
dustin_now the mirrors are out of date and it won't get the updates or allow me to do a release upgrade06:57
dustin_Hoping someone knows how to fix the issue06:57
cfhowlettdustin_, download .iso and clean install?06:58
dustin_I'm on a server, can I just download an ISO for that? only able to access through iterm via ssh06:58
cfhowlett!server | dustin_06:59
ubottudustin_: Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is !Trusty (Trusty Tahr 14.04) - More info: http://www.ubuntu.com/products/whatisubuntu/serveredition - Guide: https://help.ubuntu.com/lts/serverguide - Support in #ubuntu-server06:59
dustin_ubottu thanks, I'll give that a try. digital ocean is saying to just update the sources.list to the old mirrors and it should work. Is that accurate?07:00
ubottudustin_: I am only a bot, please don't think I'm intelligent :)07:00
dustin_ubottu ha ha07:00
somsip!eolupgrade | dustin_07:01
ubottudustin_: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades07:01
nils_dustin_, I think there is a mirror for legacy releases07:03
nils_dustin_, http://old-releases.ubuntu.com/releases/07:03
nils_good luck.07:03
dustin_nils , yeah that is what I'm trying to figure out. It is a production server so I don't want to wipe it and re-install.07:04
dustin_nils ubottu : thanks for the help. I might have more questions as I dig in.07:04
cfhowlettdustin_, what version?07:07
dustin_I have version 14.10 now07:07
cfhowlettdustin_, might I suggest that production servers should use LTS releases; currently 14.0407:07
ZcYso many people07:07
dustin_when I ssh in it says that it is no longer supported and to run do-release-upgrade.07:08
dustin_yeah, that is what i'm trying to go to. super difficult for a chump like me07:08
cfhowlettdustin_, 14.10 is no longer available via normal do-release-upgrade.  you have to use the eolupgrade options.07:08
cfhowlettdustin_, ask in #ubuntu-server for more focused advice.07:09
ZcYhow to find a girlfriend~~07:09
cfhowlettZcY, wrong channel.  play somewhere else.07:09
dustin_ok. I'll move this to there. thanks cfhowlett07:09
ZcYjust a joke07:09
nils_ZcY, I laughed ;)07:10
iBurleyAnybody know if it's safe to install the AMD proprietary video drivers from the GUI tool in 15.10 yet?07:13
=== Gi0notHere is now known as Gi0
lolmaus_Help! My Kubuntu 15.10 logs me out immediately after login! I tried renaming .Xauthority, .bashrc and .bash_profile, it didn't help. And I didn't find and anything suspicious in the logs.07:37
internetmanI am using a vpn connection with openvpn. As far as I understand these two rules should make ufw only allow me to use the vpn connection. "ufw deny out to any" + "ufw allow out 1194/udp". However after I set those two rules, everything is blocked :( I have checked that my openvpn config file uses 1194 as the port. Any ideas?07:40
ben____An error occurred, please run Package Manager from the right-clicked menu or apt-get in a terminal to see what is wrong.the error message was:'Unkown Error:'<class'SystemError'>'(E:Opening /etc/apt/sources.list.d/nodesource.list-ifstrean::ifstream(13:Permissions denied))'. this ususaly means that your installed packages have unmet dependencies.07:44
ben____can anyone help with this?07:44
ben____have tried everything for hours...07:45
=== jaco is now known as Guest74706
danatworkinternetman: for my openvpn connection i use "ufw deny all", then "ufw allow 1194/udp". Maybe there's a better way but that works for me.07:46
caf4926is 14.04.3 LTS to 2019 or is that only 14.01.1?07:46
LinuxNoobHello, anybody facing file/caja/nautilus crash issues on Ubuntu 15.10 >?07:47
akikinternetman: your openvpn client gets an ip address from a server defined ip network. 1194/udp is just the openvpn end point for the openvpn client07:49
=== Guest15002 is now known as sUbMuNdO
muhkhello everyone. Can some1 help me with netwroking. I am trying to connect to a netwrok printer. But first i had to change samba workgroup name. I tried installing the graphical samba interface, i installed it, but it is not visible when i search for it. Can you please help me with setting this up. It is really important for me08:15
=== ara is now known as Guest43121
mika_i can't get GRUB  timeout to work. i want the value to be ZERO. im using XUBUNTU.08:21
mika_after any editing i use update-grub command.08:22
EriC^^did you update-grub?08:22
EriC^^mika_: what's the timeout you get right now?08:23
mika_EriC^^,  its 10 (default)08:23
EriC^^mika_: ok, type cat /boot/grub/grub.cfg | nc termbin.com 999908:23
EriC^^mika_: try setting it to 108:25
EriC^^cause there's a line if [ "${timeout}" = 0 ]; then set timeout=1008:25
mika_yes i can see that...but why there is that line..i just noticed that...i don't usually touch that file because every grub update it will be overwritten08:26
EriC^^yeah, i don't know why that's there08:27
mika_thanks anyway :)08:27
EriC^^no poblem :)08:27
EriC^^mika_: try to set the timeout to 1008:29
EriC^^and keep the hidden timeout to 008:29
EriC^^mika_: keep the record one at 0 though08:29
clorisuis it normal to have this many broken ppa's? http://paste.linux.chat/view/d6e0b7a908:31
lotuspsychjeclorisu: ppa's are not officially supported here08:31
lotuspsychjeclorisu: and your on mint?08:32
clorisuthats from mint yeah lotuspsychje i run both though08:32
lotuspsychje!mint | clorisu08:32
ubottuclorisu: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org08:32
lotuspsychjeclorisu: choose an official ubuntu version from the topic to install mate08:33
skweeklenovo told me that they won't validate my warranty because I have linux installed on my computer08:34
stevejokeshello world08:34
skweekthey told me that it violated their terms of service08:34
skweeka lenovo rep said that installing linux on your computer voids your warranty08:35
VIpinGhi all08:35
HackerIIreturn it08:35
lotuspsychjeskweek: install back windows on it before you return it08:35
skweekI really shouldn't have to08:35
HackerIIskweek,  does it have a restore partition ?08:36
VIpinGi am not able to access internet via ubuntu terminal but can easily access via browser08:36
skweekit'd be happier, seeing a news article on slashdot saying that a lenovo rep told me installing linux on my computer voids my warranty08:36
VIpinGcan any one help me how to access internet via terminal08:36
HackerIIrestore it and go get a asus lappy08:37
VIpinGi am not able to access internet via ubuntu terminal but can easily access via browser08:37
VIpinGcan any one help me how to access internet via terminal08:38
geirhaVIpinG: what command are you trying in the terminal?08:38
VIpinGsudo apt-get update08:38
geirhaAnd what's the error message it gives?08:39
VIpinGjust waiting for network untill i kill08:39
trexHi everybody anyone can help me? I've some problem with my video card08:40
mika_EriC^^,  Hello again...hmm everytime i use update-grub command it will add that IF line there...weird08:40
stevejokescan you ping through google?08:40
EriC^^mika_: yeah, that's standard08:40
geirhaVIpinG: Do you remember setting up any proxies, either http or for apt?08:40
VIpinGi cant ping or wget or curl google08:40
EriC^^mika_: try to set the TIMEOUT=10 , but leave the hidden timeout = 008:40
VIpinGyes i know i did all setting but still its not working08:41
ThePlaguePlease advise the best method of renaming a file extension to multiple files:  for f in **/*.t1; do mv "$f" "${f%.t1}.t2" or a better way?08:41
mika_EriC^^, ok :)08:41
geirhaVIpinG: Does this output anything?  declare -p http_proxy HTTP_PROXY 2>/dev/null08:41
trexWhy i can't update my display to the right resolution? this is the 3rd installation i'm doing08:41
ThePlaguefor f in **/*.t1; do mv "$f" "${f%.t1}.t2"; done08:41
mcphailThePlague: use the rename command08:41
ThePlaguemcphail: for multiple files?08:41
mcphailThePlague: yes. See the man page. Has a good example08:42
ThePlaguemcphail: Thank you.08:42
VIpinGgeirha , yes its returning my proxy url n port08:42
=== stevejokes is now known as poCS
geirhaVIpinG: are you sure it is correct, and where did you set it up? (which file)08:43
mcphailThePlague: the biggest challenge is always finding the correct files to rename. Hard to end up without a pile of shell globs and perl regexes. Messy whatever way you do it08:43
VIpinGbasically i have two m/c one that already configured with network and working and one on that i trying08:44
ZcY? Zcy08:44
VIpinGon my setup have proxy but on alredy configured m/c not returning any proxy08:44
ZcY? ip ZcY08:45
ZcY?ip ZcY08:45
mcphailZcY: please stop that08:45
ZcYhow to see ip?08:45
EriC^^ZcY: /whois ZcY08:45
ZcYthank you08:46
trexhelp :08:46
trexplease anyone cvan help with video drivers?08:46
VIpinGgeirha , can you sugges how i can check all network configuration on already configured m/c that same i will apply on my m/c08:46
EriC^^trex: what's the problem?08:46
geirhaI don't know what "m/c" means08:47
trexEriC^^:  well this is the third installation i'm doing,i can't change my diisplay config,i'm trying to use driver manager but it doesn't work08:47
EriC^^trex: what are you trying to change in the display config?08:47
trexEriC^^: i can download the drivers but when i try to launch the driver installatiuon it says I'm using X and the installation stop08:48
trexEriC^^: my video card and the resolution08:48
trexEriC^^: it seems like he can't recognise my video card08:48
EriC^^trex: that's cause you need to turn off the xserver and do it from a terminal console08:48
VIpinGgeirha , can you please give me any suggestion08:49
EriC^^trex: you don't to install a driver from the website though to change your resolution08:49
trexEriC^^: what u suggest than?08:49
trexbecvause i've tryed to open a shel beforte log in but the command ctrl alt f1 won't work08:50
EriC^^trex: go to settings > display and change it08:50
EriC^^trex: you get gui right now?08:50
geirhaVIpinG: Well it sounds like your proxy url is wrong, and I'm guessing your gui browser does not use the same proxy setting08:50
trexEriC^^: dsoeasn't work that way wrom settings i can't change08:50
EriC^^trex: type lspci -k | grep -A2 VGA08:50
EriC^^paste the output in paste.ubuntu.com08:51
trexEriC^^: http://paste.ubuntu.com/13473037/08:52
VIpinGgeirha , as i told you i have two system on one with working internet that does not have proxy08:52
VIpinGgeirha , i also removed proxy from my m/c and trying but it still not working08:52
geirhaI still don't know what m/c means08:52
VIpinGgeirha , two linux machine on same lan on one machine via terminal internet working on another machine i want to access internet via terminal but not getting08:54
somsipVIpinG: possibly your gateway set up wrong, but this sort of query usually gets directed to #networking08:54
VIpinGon same lan that both machine using same gateway08:55
VIpinGi alredy cheked gateway and also ping , ping is working08:55
VIpinGeven from browser i can access internot but why not with terminal08:56
EriC^^trex: type dpkg -l | grep "nvidia\|nouveau"08:56
VIpinGwhen browser can access then why terminal having issue08:57
EriC^^VIpinG: proxy settings?08:57
trexEriC^^: http://paste.ubuntu.com/13473112/08:57
VIpinGi also tried with or without proxy08:57
ThePlagueVIpinG: Please try a different terminal program.08:58
EriC^^VIpinG: compare the environment on both machines08:58
EriC^^trex: sudo ubuntu-drivers devices08:59
=== AndroUser is now known as Greencloud
ThePlagueVIpinG: also - what are you pinging? Every address you ping does not get a response?08:59
VIpinG i am pining my gateway ip that is working08:59
VIpinGalso tried with diffrent terminal even restarted system but still not working08:59
skweekhttps://slashdot.org/submission/5269067/lenovo-says-linux-voids-your-warrenty vote this up if you have a slashdot account09:00
trexEriC^^: http://paste.ubuntu.com/13473153/09:00
VIpinGfrom  browser i have selected use system proxy setting09:02
VIpinGin browser everything working fine09:02
ThePlagueVIpinG: your system sounds misconfigured. Please ensure your firewall is allowing outbound ping requests.09:03
VIpinGfirewall is disable09:04
=== ara is now known as Guest18894
ThePlagueVIpinG: Please reinstall OS.09:04
somsipThePlague: bad advice. If you can't help, just dont09:04
VIpinGits already 3rd time installed OS but same problem09:04
ThePlaguesomsip: bad advice? To be fair, I don't think nobody can really help with such limited information.09:05
somsipVIpinG: it's clearly misconfigured, and #networking is usually full of networking experts09:05
EriC^^trex: try sudo apt-get install nvidia-35209:05
somsipThePlague: I agree about the limited information, which is why I'm telling him to get help elsewhere09:05
VIpinGif it is networking problem then why internet is working on browser09:05
somsipThePlague: ..and not trying to help directly09:05
VIpinGthat should also give problem09:06
=== farid is now known as Guest73312
trexEriC^^: installing09:07
=== cotroniks_ is now known as cotroniks
ThePlagueVIpinG: if you boot into a live environment from disc/usb can you reproduce the problem?09:08
=== cotroniks is now known as cotronics
=== cotronics is now known as cotroniks
VIpinGvia usb run os getting same problem09:09
somsipVIpinG: what does your route look like?09:09
EriC^^VIpinG: go to the machine that works, type env | nc termbin.com 999909:10
=== agent_wh1te is now known as agent_white
EriC^^VIpinG: on the machine that doesn't work, open the web browser and put the link and save the file, then type env > ~/env2 in a terminal09:11
EriC^^and compare the files to see what's different09:11
citronikshi to all09:11
VIpinGEriC^^ : command just waiting nothing else09:12
EriC^^in the machine that works?09:12
somsipVIpinG: you are doing it on the machine that can connect to the internet aren't you?09:12
VIpinGEriC^^ :on working macing no output again on prompt09:13
trexEriC^^: installation finished let me log ot and re log in to check09:13
EriC^^trex: hold on09:13
EriC^^trex: try sudo apt-get install --reinstall linux-generic09:13
citroniksi want to plot  eth0 of   RX bytes  Tx bytes,  how can i do by using Gnuplot please help me09:14
EriC^^VIpinG: can you connect to the other machine locally?09:14
VIpinGEriC^^ :yes09:14
EriC^^VIpinG: type on the machine env > ~/env109:15
EriC^^then from machine 2 type scp user1@host1:/home/user1/env1 ~09:15
ThePlagueVIpinG: did you manually enter your IP settings?09:16
lomDhi der09:16
trexEriC^^: done09:16
VIpinGno its DHCP09:17
EriC^^trex: ok, type sudo apt-get install --reinstall nvidia-35209:17
VIpinGEriC^^ : in output only system class path09:17
EriC^^in case it needed the headers09:17
lomDcan u please tell my why my wallpaper is not shown in lock screen....it works perfectly for default wallpapers...im using ubuntu 15.1009:17
VIpinGEriC^^ : unable to locate package09:18
EriC^^VIpinG: not you :)09:18
VIpinGThePlague : DHCP09:19
EriC^^VIpinG: on the working machine, type echo $http_proxy $HTTP_PROXY09:20
ThePlagueVIpinG: Do you have a cable modem by chance?09:20
EriC^^paste here09:20
trexEriC^^: done09:20
EriC^^trex: ok, try rebooting09:20
VIpinGEriC^^ :: no output blank09:21
VIpinGThePlague : no09:21
EriC^^VIpinG: ok, on the non-working machine type the same thing09:21
ThePlagueVIpinG: What kind of connection are you on? DSL, Fiber?09:22
VIpinGEriC^^ :: i have removed proxy and your command not giving out here also09:22
EriC^^VIpinG: ok, does ping work?09:22
VIpinGEriC^^ : what is the means of by the way not working on both machine host unreachable09:24
ThePlagueIt sounds like the problem is your home network.09:24
ThePlagueRule out your network devices.09:24
VIpinGThePlague : i am my coampany lan netwrok09:24
trexEriC^^: done but nothing seems changed09:25
ThePlagueVIpinG: did you talk to your IT?09:25
EriC^^trex: which resolution do you have?09:25
EriC^^trex: type xrandr -q09:25
VIpinGThePlague : another maching is my laptop on that i have to do all configuration09:26
trexEriC^^: http://paste.ubuntu.com/13473443/09:26
ThePlagueVIpinG: are all these machines wireless or LAN connected?09:26
EriC^^trex: type lspci -k | grep -A2 VGA09:26
VIpinGThePlague : on LAN09:27
=== user is now known as Guest22976
ThePlagueVIpinG: on the broken machine I would suggest connecting the LAN cable to a different LAN port on your switch/router and then test ping.09:27
VIpinGThePlague : i can ping my router09:28
VIpinGThePlague : and other network machine also only internet not working09:28
trexEriC^^: http://paste.ubuntu.com/13473490/09:30
akikVIpinG: try setting the environment variable http_proxy to your proxy, then "wget http://ip4.me/"09:30
EriC^^trex: hmm, it doesn't say it's using any kernel module09:31
EriC^^trex: try lsmod | grep "nvidia\|nouveau" , does it show it?09:31
krcevinaHi, what actually means "mark buffer as dirty". And how is that different from "mark page as accessed"?09:32
trexEriC^^: nope09:33
EriC^^trex: try lspci -nn | grep VGA09:33
=== Piper-Off is now known as Monthrect
trexEriC^^: http://paste.ubuntu.com/13473561/09:35
EriC^^trex: try nvidia-xconfig09:37
pixelatehey -- holy crap -- i need some real help here ... this was ... 'unexpected' -- i just installed the unity3d editor for linux (not the issue), however i made the mistake of running 'unity' (/usr/bin/unity) (i thought that would launch the unity3d editor), and it completely killed my desktop environment on x09:37
pixelateeven after a full restart, there's no login options in lightdm or anything ... i just get a desktop with no sidebar/titlebar/etc09:38
trexEriC^^: LOCATE09:38
EriC^^trex: try nvidia-settings09:38
trexEriC^^: appèlication just oppen09:39
trexEriC^^: but it's an empty application09:39
EriC^^trex: try gksu nvidia-settings09:39
EriC^^pixelate: sounds like you have autologin enabled and a config issue with your user09:40
cage_raphelHello .. i am trying to login to my ubuntu 15.04 .. i put in my credentials after my system boots up.. and once i enter my credentials it just takes me to a blank screen and it never goes to the desktop09:41
cage_raphelcan any one help pls?09:41
trexEriC^^: installinggksu first09:41
pixelateEriC^^: no autologin enabled09:41
EriC^^pixelate: can you right click on the background?09:41
pixelateEriC^^: yes -- i have no idea what happened -- been using ubuntu for ~10 years now ... never really had an issue like this09:41
EriC^^cage_raphel: does the guest account work?09:42
pixelateEriC^^: there is no cursor -- i can see my desktop background, and can left click, but there is nothing ... ctrl-alt-del brings up a process watch thing09:42
cage_raphelEriC^^, no the guest account does the same thing .. i click on it.. then it just stays blank09:42
EriC^^pixelate: ok, type cat /etc/lightdm/lightdm.conf | nc termbin.com 999909:42
trexEriC^^: with gksu nvidia settin gs just open the sampe application " nvidia " but empty with no dataù09:43
EriC^^cage_raphel: ok, did you try an older kernel?09:43
cage_raphelEriC^^,  i am sorta newbie.. how do i access the older kernel ?09:43
pixelateEriC^^: file doesn't exist09:43
EriC^^trex: ok, try sudo nvidia-xconfig09:43
pixelateEriC^^: only users.conf in that directory09:44
EriC^^pixelate: ok, after you get that screen are you able to logout from there? does ctrl+alt+t get you a terminal?09:44
trexWARNING: Unable to locate/open X configuration file.09:44
trexNew X configuration file written to '/etc/X11/xorg.conf'09:44
EriC^^cage_raphel: hold shift while the pc boots to get grub, then go to advanced > choose an older kernel09:44
cage_raphelEriC^^,  ok will do that and keep u updated09:45
EriC^^trex: ok, try sudo service lightdm restart to see if it will pick up the driver09:45
pixelateEriC^^: no on the ctrl-alt-t i can right click and a context menu pops up that allows me to open a term09:45
trexsudo service lightdm restart09:45
pixelateEriC^^: no system title bars / unity menu / et09:45
trexEriC^^: with sudo service lightdm he says " unre4cognised service"09:46
EriC^^pixelate: ok, that's odd, it does sound like it's autologging in though09:46
SlidingHornumm...did you open an openbox session somehow, pixelate?09:46
pixelateEriC^^: no -- i'm putting password in to lightdm09:46
SlidingHorn(half kidding...half not)09:46
EriC^^pixelate: oh i thought you said you get the screen straight away, nevermind then09:46
cage_raphelEriC^^,  by the way .. when i reboot my machine.. it says.. checking in progress on 1 disk.. is that even normal ?09:46
pixelateSlidingHorn: i have no idea what happened -- i accidentally ran '/usr/bin/unity' (thought it was a different application i had just installed ... and then everything disappeared -- after reboot/etc. nothing there09:47
pixelateFWIW, guest user works without issue09:47
EriC^^pixelate: which de do you have installed?09:47
pixelateeverything is more or less default configuration09:47
pixelate(btw -- i'm assuming de you mean 'desktop environment')09:48
EriC^^ok, try typing dconf reset -f /org/compiz09:48
EriC^^in that terminal you get when you login09:48
cage_raphelEriC^^,  i am in the grub now.. it gives me 3 options .. *Ubuntu with inux 3.16.0-45-generic and upstart and recovery mode.. what do i choose ?09:48
pixelateEriC^^: was that instruction for me?09:48
EriC^^pixelate: yeah09:48
EriC^^cage_raphel: try recovery09:49
cage_raphelEriC^^,  roger that !! :)09:49
pixelateEriC^^: did it -- restarted lightdm from tty1, logged back in, same problem09:49
EriC^^pixelate: ok, try rm -r ~/.compiz ~/.config/compiz-109:50
cage_raphelEriC^^,  now it gives me a wide range of options in the recovery meny.. it says.. resume with normal boot , clean to make free space, dpkg - repair broken packages, failsafex - run in failsafe graphioc mode , fsck, grub, network, root and system summary.. what do i choose?09:51
pixelateEriC^^: nada after lightdm restart and re-logging in09:51
felicity_can anyone help me to install metasploit??09:51
=== ^cj^ is now known as ^CJ^
bumbar_how can i install https://launchpad.net/ubuntu/+source/boost-defaults/ on ubuntu 14.04?09:52
ubottuA Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge09:53
wmorri!addppa | bumbar_09:53
ubottubumbar_: A !ppa can be added using a single command «  sudo add-apt-repository ppa:user/ppa-name » See https://help.ubuntu.com/community/Repositories/Ubuntu#Adding%20PPAs for more details09:53
EriC^^cage_raphel: try run in failsafe graphic09:53
felicity_help me to install metasploit in ubuntu 15.1009:53
EriC^^pixelate: try mv ~/.config ~/.config.old09:54
cage_raphelEriC^^,  ok will run it and keep u updated09:54
VIpinGakik : thanks your suggestion gave me solution09:55
cage_raphelEriC^^,  i get a msg saying .. continuning will remount your / file system in read/write mode and mount any other filesystem defined in /etc/fstab. do u wish to continuie.. yes or no ??09:55
pixelateEriC^^: yeah -- i was hoping to avoid doing something lik ethat09:55
cage_raphelEriC^^,  was that answer for me ?09:55
pixelate(or toasting entire home directory ... )09:55
EriC^^cage_raphel: yeah :)09:56
EriC^^pixelate: it's a user config issue, so you have to track it down09:56
pixelateEriC^^: yeah -- that allowed unity to start regularly09:56
cage_raphelEriC^^, thanks mate :)09:56
pixelateEriC^^: yeah -- i realize that -- but dammit, that means a lot of resetting things that are REALLY ANNOYING about unity by default, like snapping windows, etc.09:57
cage_raphelEriC^^, i get a black screen with a msg .. (EE)  Server terminated with error (1). closing log file.. and it goes back to the same screen with all the menays like resume .. clean .. dpkg etc..09:58
EriC^^cage_raphel: ok, were you able to get a tty earlier when you booted as usual?09:58
cage_raphelEriC^^,  what is a tty ?09:59
bumbar_wmorri, where can i see the username and ppaname?09:59
EriC^^the terminal you get when you  press ctrl+alt+f109:59
cage_raphelEriC^^,   i never tried a ctrl+alt+f110:00
EriC^^cage_raphel: ok, give it a shot10:00
cage_raphelEriC^^,  so where do i go from h ere ... do i choose resume normal boot ?10:00
EriC^^nope choose quit10:00
=== cyphase_ is now known as cyphase
cage_raphelEriC^^,  there is no option to quit10:01
EriC^^restart ? exit?10:01
cage_raphelEriC^^,  there are no options at all other than resume.. clean dpkg etc..10:02
EriC^^cage_raphel: ok, press ctrl+alt+del10:02
cage_raphelEriC^^,  shall i try resume normal boot ?10:02
Yossarianukhi - how to I stop 'ALLOWED' apparmor rules from writing to the logs?10:02
Yossarianuk e.g -> im getting lots of '[44955.878729] type=1400 audit(1448269350.768:220): apparmor="ALLOWED" operation="open" profile="/usr/sbin/sssd" name="/var/lib/sss/pubconf/krb5.include.d/domain_realm_ipa_xxxxx_co_uk" pid=8515 comm="ldap_child" requested_mask="r" denied_mask="r" fsuid=0 ouid=0' - can I modify the apparmor rules to not write to the file ?10:02
logg_Hi ppl, is there an intelligent hide launcher option in ubuntu?10:03
pixelateEriC^^: well, thanks for the help -- I'll try to figure out what exactly happened from the /usr/bin/unity script and report back if i can reproduce what happened10:04
cage_raphelEriC^^,  cntrl+alt+del does not work .. can i force shut down insted ?10:05
cage_raphelEriC^^,  do i give a cntrl + alt+f1  at restart ?10:07
cage_raphelEriC^^,  actually i did it when i put in my password.. it has kinda taken me to a terminal .. and is asking for my login10:08
cage_raphelEriC^^,  it says krishnaaroona login:10:08
cage_raphelEriC^^,  what do i put in here i have never seen this creen before ?10:08
wmorribumbar_, I am not finding the normal add this ppa to your system, on that page.10:08
wmorribumbar_, also look at this help page. http://askubuntu.com/questions/4983/what-are-ppas-and-how-do-i-use-them/40351#4035110:09
=== ^CJ^ is now known as ^cj^
cage_raphelEriC^^,  i am logged in in the tty10:09
cage_raphelEriC^^,  what do i do now ?10:09
EriC^^cage_raphel: im back10:10
cage_raphelEriC^^,  welcome back .. i am logged into the tty .. where do i go from here ?10:10
EriC^^cage_raphel: type lspci | grep VGA | nc termbin.com 999910:10
cage_raphelEriC^^,  is the word " type " a part of the command ?10:10
logg_Hi ppl, is there an intelligent hide launcher option in ubuntu?10:11
bumbar_wmorri, it seems it's in wily werewolf (15.10), i guess i'd have to upgrade ubuntu for this?10:11
wmorribumbar_, yes if you are on 15.0410:11
wmorrior older10:11
bumbar_i'm on 14.04, but i only need this one package... seems kinda wasteful to upgrade everything10:12
cage_raphelEriC^^,  ok .. now it says http://termbin.com/tsp510:12
wmorribumbar_, sorry I didn't see you were on 14.04. My apologizes10:12
cage_raphelEriC^^,  and it says krishnaroona@krishnaroona:"$10:13
EriC^^cage_raphel: ok, type cat /var/log/Xorg.0.log | nc termbin.com 999910:14
wmorribumbar_, I don't have a good solution, I can check with EriC^^ and see if he has any thoughts.10:15
cage_raphelEriC^^,  it says no such file or directory10:16
wmorriEriC^^, I am helping bumbar_ and he trying to install a ppa that says it only works on 15.10 and he has 14.04.10:17
EriC^^wmorri: which package is he trying to install?10:17
bumbar_wmorri, i'll just upgrade to 15.10, might as well report bugs along the way :)10:17
wmorriEriC^^, https://launchpad.net/ubuntu/+source/boost-defaults/
EriC^^cage_raphel: are you sure of the spelling? Xorg.0.log ? the second 0 is a zero not the letter o10:18
cage_raphelEriC^^,  lemme tyope the command again .. it does look right to me.. but i dont wanna take a chance10:19
logg_Hi ppl, is there an intelligent hide launcher option in ubuntu?10:19
logg_Hi ppl, is there an intelligent hide launcher option in ubuntu?10:19
yuriyi've got a problem with placing mysql data on other partition10:20
yuriyi tried different experiments without success10:21
EriC^^logg_: settings > appearance > behavior10:21
yuriythose instractions are listed everywhere, but i can't get the reason why it's not working for me10:22
cage_raphelEriC^^,  it says.. Cat: var/log/Vorg.0.log: no such file or directory .. use net cat.10:22
EriC^^Xorg.0.log you mean?10:22
logg_EriC^^: you can make it autohide, but is there an option to make it intelligent hide. To hide only when i put an app to full screen10:23
yuriymy another partition disc mounted here: /media/yuriy/work10:23
wmorribumbar_, sounds good, best of luck with everything!10:23
cage_raphelEriC^^,  yes that is correct10:23
EriC^^logg_: oh, don't know about that, maybe there's a ppa for it10:23
EriC^^cage_raphel: are you putting a "/" before var ?10:23
cage_raphelEriC^^,  its / var10:24
yuriyso i placed related patches here: /etc/apparmor.d/usr.sbin.mysqld, /etc/mysql/mysql.conf.d/mysqld.cnf10:24
yuriymy full path is /media/yuriy/work/storage/mysql_data/10:25
yuriyso /media/yuriy/work is mounted disc10:25
yuriywork is label of my disc10:26
EriC^^cage_raphel: it should be there, type ls -l /var/log10:26
EriC^^do you see it listed?10:26
yuriyanybody know what's the pb is, how to resolve that10:26
cage_raphelEriC^^,  when i put that command it gives me a big list10:27
cage_raphelEriC^^,  it shows about syslog , root10:27
flip621Hi. How would I reconfigure the list of locales in wily? "debconf-show locales" shows no questions and no answers, "dpkg-reconfigure locales" just regenerates the en_* ones.10:27
yuriylogs say:10:27
yuriy2015-11-23 12:18:44 0 [Note] /usr/sbin/mysqld (mysqld 5.6.27-0ubuntu1) starting as process 15558 ...10:28
yuriy2015-11-23 12:18:44 15558 [Warning] Can't create test file /media/yuriy/work/storage/mysql_data/yuriy-Inspiron-5521.lower-test10:28
yuriy2015-11-23 12:18:44 15558 [Warning] Can't create test file /media/yuriy/work/storage/mysql_data/yuriy-Inspiron-5521.lower-test10:28
yuriy/usr/sbin/mysqld: Can't change dir to '/media/yuriy/work/storage/mysql_data/' (Errcode: 13 - Permission denied)10:28
yuriy2015-11-23 12:18:44 15558 [ERROR] Aborting10:28
EriC^^cage_raphel: do you see it at the bottom area?10:28
EriC^^yuriy: use paste.ubuntu.com for pastes10:28
cage_raphelEriC^^,  it all shows root at the bottom area10:28
trexEriC^^: sorry but my pc disconnected and iu couldn't reconnect10:29
EriC^^cage_raphel: on the right side does it say Xorg.0.log ?10:29
trexEriC^^: stiull have the same problem10:29
yuriyok, sorry for that10:29
EriC^^trex: ok, type cat /var/log/Xorg.0.log | nc termbin.com 999910:29
yuriyi hope anybody helps10:29
cage_raphelEriC^^,  on the right side.. the last output is 5799 Nov 22 19:54 Xorg.failsafe.log.old10:29
EriC^^cage_raphel: ok, is there Xorg.0.log somewhere above it?10:30
cage_raphelEriC^^,  yes that is positive.. there is a Xorg.0.log10:31
Krakenanyone here?10:32
=== Kraken is now known as Guest96828
EriC^^cage_raphel: ok, type cat /var/log/Xorg.0.log , does it output anything?10:33
bluenemohi guys. when I run locale-gen I get Error: Bad entry 'de_DE.UTF-8 ' , I see the extra whitespace but dont find the file where this is defined10:34
cage_raphelEriC^^,  it outputs a lot of this..10:34
cage_raphelEriC^^,  its a big much of a output10:34
EriC^^cage_raphel: ok, type cat /var/log/Xorg.0.log | nc termbin.com 999910:34
=== ^cj^ is now known as ^CJ^
cage_raphelEriC^^,  ok .. now it says .. http:// termbin .com/wzqj10:36
cage_raphelEriC^^,  and it has not returned to my login name.10:36
cage_raphelEriC^^,  it has now returned to my login name10:37
EriC^^cage_raphel: ok, type sudo apt-get install --reinstall xserver-xorg-video-intel10:37
wmorribluenemo, enter cat /var/lib/locales/supported.d/local and tell me if you get anything?10:37
=== ^CJ^ is now known as ^cj^
AQLIVEhi Eric10:39
AQLIVEare you here10:39
EriC^^yeah, i'm here10:39
cage_raphelEriC^^,  it tried to install someting .. now it says .. E: unable to correct problems , you have held broken packages10:40
EriC^^cage_raphel: try sudo apt-get -f install10:40
AQLIVEI've done the chkdsk and it found no problems. What should I do now then?10:40
EriC^^AQLIVE: try sudo mount /dev/sda1 /mnt again10:40
AQLIVEok I'll restart it into ubuntu then10:41
cage_raphelEriC^^,  output.. 0 to upgrqade, 0 to newly install and 0 to remove,, and 330 not to upgrade10:41
EriC^^cage_raphel: what happened before you lost the desktop?10:41
bluenemowmorri, I already looked into that and /etc/environment, nothing with an extra whitespace :(10:42
cage_raphelEriC^^,  nothing happened.. it was all good.. it was just in sleep mode.. i dont normally leave it in sleep mode..10:42
AQLIVEI think it mounted10:43
AQLIVEthen what10:43
EriC^^bluenemo: try grep -r 'de_DE.UTF-8 ' /etc ~/10:43
EriC^^AQLIVE: great, type ls -l /mnt/bootmgr10:44
EriC^^cage_raphel: ok, type sudo apt-get update10:44
EriC^^cage_raphel: then type sudo apt-get dist-upgrade10:44
EriC^^bluenemo: use sudo with it10:45
cage_raphelEriC^^, may u live a 100 years mate.. i just put those commands in even before i said...10:45
AQLIVEno such file or directory10:45
cage_raphelEriC^^, .. looksw like i am learning !! :")10:45
EriC^^cage_raphel: :)10:45
EriC^^AQLIVE: ok, try sudo umount /mnt10:45
EriC^^AQLIVE: then type sudo update-grub , see if it picks up windows this time10:46
wmorribluenemo, are you trying to add that file to your list then?10:46
bluenemoEriC^^, I already tried the grep. No I just took over this server and the website on it has localization issues10:48
AQLIVELinux image, initrd image, memtest86+ image, memtest86+ image   is what it finds10:48
bluenemoit thinks its english10:48
EriC^^AQLIVE: ok, type sudo nano /etc/grub.d/40_custom10:49
AQLIVEand then what should I write in the file10:51
wmorribluenemo, if you need to add a language pack just use this command: sudo apt-get install language-pack-XX10:51
wmorriand then use sudo update-locale10:52
bazhangAQLIVE, use tab complete to show who you are talking to10:53
EriC^^AQLIVE: add this http://paste.ubuntu.com/13474548/10:53
flip621how can I configure the list of locales?10:53
wmorriflip621, sudo dpkg-reconfigure locales10:54
AQLIVEEriC^^: Could you give me the link again10:54
EriC^^AQLIVE: http://paste.ubuntu.com/13474548/10:55
wmorriflip621, if you just need a list of them you can use locate -a10:56
AQLIVE_EriC^^: and then what10:56
EriC^^flip621: * locale -a10:57
wmorrithanks EriC^^10:57
EriC^^AQLIVE_: press ctrl+o to save10:57
AQLIVE_EriC^^: I did that10:57
EriC^^AQLIVE_: type sudo update-grub10:58
AQLIVE_EriC^^: same as before10:58
EriC^^it didn't say windows ?10:59
AQLIVE_nope :(10:59
bluenemowmorri, just did that. do I need to restart my apache / php-fpm to pick up the changes?11:00
AQLIVE_menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' chainloader +1 }11:00
AQLIVE_EriC^^: /etc/grub.d/40_custom: 1: /etc/grub.d/40_custom: X#!/bin/sh: not found done11:01
EriC^^AQLIVE_: type cat /etc/grub.d/40_custom | nc termbin.com 999911:01
EriC^^AQLIVE_: i think there's an X before #!/bin/bash in the file11:02
AQLIVE_EriC^^: http://termbin.com/hdly11:02
b019everythng all right11:02
b019_wat für  ding11:02
b019iam so gay11:02
wmorribluenemo, you might, I haven't had to add a new language before.11:02
EriC^^AQLIVE_: ok, it looks good, remove the X before #!/bin/bash and save11:02
b019ihr nig*ahs11:02
b019_du huan11:02
wmorri!ot | b01911:02
b019__was willst du11:02
ubottub019: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!11:02
b019__alt dein maul11:03
b019__du pimmel11:03
=== dude is now known as Guest30411
EriC^^!ops | trolling and flooding11:03
ubottu89.1.10.122 trolling and flooding: Help! Channel emergency! (ONLY use this trigger in emergencies) - Pici, Myrtti, jrib, Amaranth, tonyyarusso, Nalioth, lamont, CarlK, elky, mneptok, PriceChild, Tm_T, jpds, ikonia, Flannel, genii, wgrant, stdin, h00k, IdleOne, nhandler, Jordan_U, popey, Corey, ocean, cprofitt, djones, Madpilot, gnomefreak, lhavelund, k1l, rww, phunyguy, bazhang11:03
yuriyhey guys i'm feeling so stupid to get understanding what's wrong with my configuration11:04
CaelumI'm trying to install a 32 bit package, but it is telling me: Note, selecting 'libavcodec-ffmpeg-dev' instead of 'libavcodec-ffmpeg-dev:i386'11:04
Caelumwhy is it doing that11:04
AQLIVE_EriC^^: OK but still no windows 711:04
bluenemoDrone`, can you ban b019 or whatever his name? He is spamming racist curses in german11:05
Caelumand apt-cache policy says this package does not exist11:06
KazooieHi. I have a computer running Ubuntu 14.10 and I want to upgrade it to 15.04 then 15.10 but `sudo do-release-upgrade` 404's on the repos. Is there another way to upgrade without having to download a new copy (the computer has a busted cd drive and doesn't accept Flash drive installs)11:06
bazhangbluenemo, thats a bot11:06
EriC^^AQLIVE_: update-grub doesn't show it?11:06
DJonesbluenemo: They've already been quieted, so they spam the channel11:06
bluenemoah ok11:06
CaelumKazooie: use dist-upgrade11:07
CaelumKazooie: and you can go straight to 15.1011:07
AQLIVE_EriC^^: http://paste.ubuntu.com/13474705/11:08
KazooieCaelum: dist-upgrade is showing that there is no updates.11:08
EriC^^AQLIVE_: type ls -l /etc/grub.d/40_custom11:09
trexEriC^^: i'm trying to do everything11:09
trexbut nothing is changing here11:09
EriC^^trex: did you try a different driver from the list?11:09
wmorriKazooie, you want do-release-upgrade if you want to upgrade to a newer release.11:09
EriC^^352-updates or 340/340-updates ?11:09
trexEriC^^: i found the right driver,on the website,i've opened a shell,killed x and launched the installer for nvidia drivers11:10
Caelumwhat is the package for the 32 bit cross build toolchain11:10
trexEriC^^: before the end of the installation it say unable to load kjeernel11:10
jpdsCaelum: That went away with multiarch11:10
freakyyhi all. i have a problem while trying to install ati driver. i get http://paste.ubuntu.com/13474477/ and i need to unload those kernel modules - how can i dot hat?11:11
Caelumjpds: well gcc -m32 is telling me it can't find libgcc11:11
Caelumjpds: so I must be missing something11:11
Caelumor doing something wrong11:12
AQLIVE_EriC^^: http://paste.ubuntu.com/13474770/11:13
freakyywill restart now maybe i found the problem11:13
flip621wmorri: EriC^^: "dpkg-reconfigure locales" just rebuilds the defined locales, and "debconf-show locales" shows no answers and no questions.11:15
wmorriflip621, locales -a this will show what you have on your system.11:17
wmorriflip621, locale -a11:17
EriC^^AQLIVE_: ok, type cat /boot/grub/grub.cfg | nc termbin.com 999911:19
flip621wmorri: yes, and I'd like to change the list of available locales.11:19
EriC^^trex: maybe it's made for an older or newer kernel?11:20
wmorriflip621, what do you want to change about the list?11:20
AQLIVE_EriC^^: http://termbin.com/d7zs11:20
homehi all, how can I access my files within an ecrypted home from a live cd?11:20
flip621wmorri: I'd like to get german locales in11:20
trexEriC^^: i don't know what happened i could set it up dAYS AGO THAN I HAD TO REINSTAL EVERYTHING AND FROM NOW ON HASN'T WORKED11:20
wmorriflip621, sudo apt-get install language-pack-XX11:21
EriC^^AQLIVE_: ok, it seems to be there, try restarting and holding shift to get grub and choose windows11:21
wmorriflip621, where XX is the language pack you want to install.11:21
AQLIVE_ok I'll try that - thanks and keep your fingers crossed :D11:22
EriC^^trex: try sudo apt-get update , then sudo apt-get dist-upgrade11:23
homeHow can I get access to my files from a live cd with encrypted home? Both the installd and live system are 14.0411:23
AQLIVEEriC^^: I did that and it could not see a windows 7 in the boot upmenu but it said bootmgr missing when I tried to load the windows 7 installation11:24
EriC^^home: http://ubuntuforums.org/showthread.php?t=159724611:25
EriC^^AQLIVE: so you saw windows in grub but it said bootmgr is missing?11:25
Caelumapt-file seems to not be working for me11:26
Caelumapt-file search <anything> returns nothing11:26
AQLIVEEriC^^: Yes11:26
EriC^^Caelum: did you update the cache?11:26
Caelumand I did a sudo apt-file update11:26
EriC^^Caelum: try sudo apt-file update again11:27
EriC^^AQLIVE: ok, are you in ubuntu right now?11:27
EriC^^AQLIVE: ok, type sudo mount /dev/sda1 /mnt11:27
EriC^^then type ls -l /mnt , is the windows install still there?11:27
AQLIVEand then11:28
AQLIVEEriC^^: http://paste.ubuntu.com/13474947/11:29
CaelumEriC^^: it looks like it doesn't use the global cache anymore if you aren't running it as root, I had to do an apt-file update without the sudo and now it works11:29
EriC^^AQLIVE: that doesn't look too good11:29
EriC^^( that's an understatement )11:29
AQLIVEI was affraid you'd say that11:30
EriC^^AQLIVE: try sudo testdisk11:30
EriC^^Caelum: oh ok, cool, good to know!11:30
=== aaron is now known as Guest61795
homeEriC^^: I get a warning that I've never mounted with that key before11:32
AQLIVEEriC^^: And then repair MFT ??? from within the advance menu and NTFS11:32
EriC^^AQLIVE: hmm, first to list the files11:32
EriC^^AQLIVE: don't try any repairs yet11:32
EriC^^*first try to11:33
tokamAfter an update to Ubuntu 15.10 my xorg session does not start after boot up.11:33
tokamI get an error in a file named main.c11:33
tokamBut I can run startx -- :1 tty811:34
AQLIVEEriC^^: please select the partition table type and press enter screen right now11:34
AQLIVEEriC^^:I'm at the - please select the partition table type and press enter screen right now11:34
flip621wmorri: thanks, that did help. but is it not possible anymore to *deselect* locales?11:35
EriC^^AQLIVE: ok, choose Intel11:35
ring3hi guys11:35
AQLIVEEriC^^: and then11:36
ring3do you know how my dirmngr is doing a 'su root'?11:36
ring3is that normal?11:36
EriC^^AQLIVE: then analyze11:36
EriC^^ring3: he probably has set the root password11:36
ring3su[1445]: Successful su for dirmngr by root11:37
AQLIVEEriC^^: and then the NTFS partion right?11:37
ring3maybe cron, is droping from root to dirmngr user?11:37
EriC^^ring3: that means he was root and did su dirmngr11:37
ring3yep, but i dont did that11:38
EriC^^AQLIVE: yeah, press p to list the files11:38
homeHow  can I get access to fileswithin encrypted home?11:38
cfhowletthome, decrypt and access.  no decryption, no access. kind of the point of it, yes?11:39
AQLIVEEriC^^: http://paste.ubuntu.com/13475078/11:39
EriC^^ring3: maybe he has a cron that uses su dirmngr11:39
EriC^^AQLIVE: ok, highlight the ntfs one, and press p11:41
wmorriflip621, sudo apt-get remove language-pack-XX should do what you want.11:41
homecfhowlett: sure, and I'd like to be able to get a hold of my files from a live cd. So how do I do that?11:41
m1dnight_What is the idiomatic way to set default values for an upstart script? /etc/default/ is not being used, so it seems..11:41
m1dnight_And I dont know how to google it tbh11:41
wmorriflip621, other than that I don't know a way.11:42
cfhowlett!encryption | home see the links.  depends on the exact encryption method you used11:42
ubottuhome see the links.  depends on the exact encryption method you used: For information on setting up encrypted private directories (8.10+) see https://help.ubuntu.com/community/EncryptedPrivateDirectory11:42
AQLIVEEriC^^: http://paste.ubuntu.com/13475133/11:43
EriC^^AQLIVE: looks like it's empty11:44
AQLIVEEriC^^: meaning11:45
flip621wmorri: thanks11:45
EriC^^AQLIVE: if the files weren't important i'd just reinstall windows, if they were important you can try using photorec to get them back11:45
EriC^^AQLIVE: try the repair mft thing if you want11:45
=== daniel is now known as Guest98333
wmorriflip621, your welcome :)11:46
Guest98333need support11:47
AQLIVEEriC^^: MFT and MFT mirror are bad. Failed to repair them.11:47
homecfhowlett: that works, thanks11:49
cfhowletthome, happy2help!11:49
problemmakerHi, I've installed ubuntu 15.10 and nvidia 353.63 via "additional drivers". I can switch from nvidia to intel insisde nvidia-settings without problems but after switching back to nvidia and signing off I get an error. black screen with an window where I can choose low graphics mode or configure the card myself or something like that. after rebooting nvidia is working normally I guess11:49
MrFastDieHey guys! Someone here who'd like to teach me some funktions in Armitage?11:52
cfhowlettMrFastDie, wrong channel11:53
MrFastDieWhich I have to visit?11:53
cfhowlett!alis | MrFastDie,11:54
ubottuMrFastDie,: alis is a services bot that can help you find channels. Read "/msg alis help list" . For more help or questions relating to alis, please join #freenode. Example usage: /msg alis list #ubuntu or /msg alis list http11:54
al2o3-cr/join #armitage11:55
al2o3-cr^ MrFastDie11:55
MrFastDieThank you! :D11:56
motaka2While starting ubuntu 12.04 after seeing the grub os selection page , I see the mouse pointer for a secons and then I see a black screen. I tried to load by editing the grub with nomodset by pressing ctrl+e and then then changing it and then pressing ctrl+x11:57
motaka2but not only nothiing changed but also after the restart I see nomodeset is removed from the grub11:57
EriC^^AQLIVE: there might be a way to recover it, ask in ##windows maybe11:58
tokamAfter upgrading to 15.10 on startup xorg does not showup but I get this message12:04
tokam[main.c:1921]                                              check_verbosity:redirecting debug output to /dev/tty712:04
huwjrcan anyone explain why curl -v shows a bunch of libraries (such as zlib libidn etc) - but when I use curl on CLI they are not included in the post??12:09
huwjrthis is really winding me up lol12:09
bumbarI was installing Ubuntu 15.10 and pc froze midway, and then I got kernel panic unable to sync vfs error, so from live cd I've rangrub-install --root-directory=/mnt /dev/sda and now I've got grub open, what should I type in?12:23
akikhuwjr: what is the problem? if you use -V (capital) it shows the versions and protocols12:25
akikhuwjr: if you use -V you can not download files12:26
huwjrYeah, I know this sounds dumb (and it’s only the user agent after all) but I am having a problem with CURL and the only thing differing between multiple hosts when I run a curl from command line the useragent misses a bunch of required libraries12:26
huwjrfor example a known working host returns:12:26
huwjr> User-Agent: curl/7.22.0 (x86_64-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/ libidn/1.23 librtmp/2.312:26
huwjrthe one that isn’t working properly returns12:26
huwjr> User-Agent: curl/7.35.012:26
huwjrdoes curl not by default include libraries in the user agent anymore ? or is there something more sinister going on.12:27
youngcjhow can i launch hotspot in ubuntu it refuse to show my mac address12:27
killallHello, i need some help, i have 2 usb devices purchased in diferent times and one works and the other does not work. Booth work in windows.   SONiX USB Device in lsusb detects as   0c45:8419 Microdia12:28
freakyyhm i cant get gw2 to work. it freezes my screen with playonlinux12:28
akikhuwjr: probably those missing libraries make it so that you can not use https for example12:28
huwjrbut they are there in curl -V12:28
huwjrbut not in the user agent12:28
akikhuwjr: but you said that "the one that isn’t working properly returns"12:28
huwjrcurl -V on good host = curl 7.22.0 (x86_64-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/ libidn/1.23 librtmp/2.312:28
=== morgan is now known as Guest74622
huwjrcurl -V on bad host = curl 7.35.0 (x86_64-pc-linux-gnu) libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.312:29
=== Guest74622 is now known as MrMorgan
youngcjis someone hearing me out there12:29
killallyoungcj,  a lot of marcians rare12:30
youngcji need a help to launch a hotspot12:30
homeI'm having problems logging in via lightdm, terminal login works. I've just reinstalled and restored my home from the backup, but I'm afraid something got messed up. I have the same username but the uid has changed from 1001 on the old system to 1000 on the new. Could that be related?12:31
akikhuwjr: what is the error message you're getting with curl 7.35.0 ?12:31
killallyoungcj,  you want a hotspot?12:32
huwjr2mins - think i’ve got somewhere!!12:32
killallyou will ned a decent router mikrotik already has that in the firmware, otherwise look at coovachili ;)12:32
akikhuwjr: some web sites might refuse to service curl but you can change the http user agent12:33
freakyyhi all. is there a possibility to style gdm?12:49
lotuspsychjefreakyy: theme?12:51
freakyylotuspsychje: yea and other options i dont know12:52
kostkonfreakyy, http://gnome-look.org/index.php?xcontentmode=15012:52
=== Tsunami is now known as Guest77026
nbusroneDoes anyone know how to disable usb3 wakeup for specific port ? and as for permanent ?13:00
lotuspsychjenbusrone: whats your end goal with this?13:01
freakyyhm, the only thing i wanna do is change the background of gdm to a solid color - is that posible?13:02
AlexQWhat is the fastest way to copy a filesystem from partition A to B? I mean, I want something like dd, but that won't waste time copying empty spaces (but leave fragmentation and filesystem size as they are).13:02
freakyyi dont want a real theme13:02
lotuspsychjeAlexQ: clonezilla perhaps?13:02
frostschutzAlexQ, dd bs=1G iflag=fullblock if=/dev/sdx3 of=/dev/sdx4 - or regular rsync -aAHSX (and not care about fragmentation), take your pick13:03
AlexQfrostschutz: How does dd know which blocks are full? Is if filesystem-aware?13:04
frostschutzAlexQ, no. at best you could conv=sparse to skip zeroed blocks, but the target has to be zeroed as well for that to work, or the copy will be corrupt13:05
freakyyok nm it looks like gdm cant be styled like gnome can be13:06
freakyyin gnome u can select a solid backgruond color13:06
frostschutzAlexQ, but as long as your filesystem is not 90% empty, it will still be faster to dd it all than to do anything else13:06
thatkid_hello, I spinned a Ubuntu vm from azure, and downloaded some stuff into it, I want to download that from azure to my computer How can I do that?13:06
killallthatkid_,  man scp  or man rsynx13:06
AlexQfrostschutz: Actually I changed my mind; I think it would be nice to have the filesystem defragmented for not-so-enormous time penalty by just copying file by file. So that rsync -aAHSX should be much faster than regular cp -R?13:10
Kartagisdoes Xenial Xerus exist as alpha?13:11
Kartagisaka Ubuntu 16.0413:11
lotuspsychjeKartagis: still in daily build stage13:11
lotuspsychjeKartagis: join #ubuntu+113:11
frostschutzAlexQ, no, but rsync can resume in case of problems in between and such13:11
nbusronelotuspsychje : Goal ? Actually I am having problem with 14.04. USB3.0 port connect with an external 2.5 drive get auto restart when I shut down the pc.13:12
lotuspsychjenbusrone: that should not happen, try a tail -f /var/log/syslog and plugin your external to see errors?13:13
nbusronelotuspsychje : Someone mention it's probably the wakeup option on usb3.0 port which need to disable the wakeup option on ubuntu.While using windows it doesn't auto restart13:13
AlexQthanks frostschutz13:13
nbusronelotuspsychje : it'd days before , let me  check the log please wait a min13:15
orf_Hey all, I'm having a weird problem with some GUI programs. Sometimes they go like this: http://i.imgur.com/JQqaoic.png13:15
orf_it's like they are drawing lots of the same panels over eachother. It's really really annoying and affects a few programs seemingly randomly13:15
orf_but hits Virtualbox more often than not. Has anyone experienced this before?13:16
orf_(and seems to only effect QT based programs)13:17
kcud_dab_Bitcoin provider of ISIS https://localbitcoins.com/accounts/profile/arthurbouquet/13:23
lotuspsychje!ot | kcud_dab_13:23
ubottukcud_dab_: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!13:23
=== bm is now known as Guest56058
cfhowlettkcud_dab_, thanks for the spam and enjoy membership in my /ignore list13:24
cfhowlett /s13:24
nbusronelotuspsychje : how to check for errors ? currently I am not too sure where's the log line i should search13:26
bumbari was upgrading to 15.10 and something went wrong, then i've tried to fix grub with livecd, and now when i reboot i'm prompted by grub, then i "mount" the disk and next i'm shown an initramfs prompt. i've tried fixing a superblock but didn't help13:26
lotuspsychjenbusrone: anything related to your usb or external hd perhaps13:26
bumbaron livecd i can see the disk, it's listed under /dev/ubuntu-vg/root13:27
EriC^^bumbar: are you on the live session right now?13:27
EriC^^type sudo parted -l | nc termbin.com 999913:28
orf_so nobody knows why my QT programs are spazzing out left right and center?13:28
bumbarEriC^^: http://termbin.com/in8c13:29
lotuspsychjeorf_: this only happens in virtualbox?13:29
nbusronelotuspsychje : a bunch of usb right now on my sys log , need to check what casing the error13:29
orf_lotuspsychje: seems like it happens to a few different QT based programs13:29
orf_but I use virtualbox the most13:29
lotuspsychjeorf_: but does it also happen outside vm in your ubuntu desktop13:30
orf_yes, it happened in the gnome preferences page13:30
orf_it seems like the window is being drawn multiple times ontop of eachother13:30
lotuspsychjeorf_: wich ubuntu version?µ13:31
orf_latest, 15.1013:31
lotuspsychjeorf_: wich graphics card chipset and driver?13:31
orf_intel based, let me find out exactly13:31
lotuspsychjeorf_: did you have this on LTS?13:32
orf_lotuspsychje: 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)13:33
orf_I haven't used LTS, I went into 15.1013:33
lotuspsychjeorf_: what does driver= mention?13:33
orf_configuration: driver=i915 latency=013:34
lotuspsychjeorf_: ok good, i would try a live 14.04 LTS to test13:34
lotuspsychjeorf_: might be a glitch in 15.1013:34
lotuspsychjeorf_: or file a bug on 15.1013:34
orf_I think I will file a bug, this is my work machine and I can't afford the time to re-install 14.0413:35
orf_I saw a stack overflow post with someone with the same issue, so it's not just me13:35
orf_I'll try and find that and include it in the report13:35
nbusronelotuspsychje : maybe you can have a look13:35
nbusronelotuspsychje : http://pastebin.com/JC7Rhh6913:35
lotuspsychjeorf_: try to run your qt packages from terminal, see what error it gives13:35
orf_ooh, that's a good idea13:36
orf_I'll try that, thanks lotuspsychje13:36
lotuspsychjenbusrone: could you try plugin your hd to usb from the guest user, to see if it happens there also?13:37
nbusronelotuspsychje : will it be different ?13:38
lotuspsychjenbusrone: not sure, lets test13:38
lotuspsychjenbusrone: dont see anything unusual in syslog13:38
lotuspsychjenbusrone: try same tail -f /var/log/dmesg perhaps13:39
EriC^^bumbar: type sudo mount /dev/mapper/ubuntu--vg-root /mnt13:42
nbusronelotuspsychje : as mention from someone , the USB3.0 device trigger a shutdown option on 14.04 as wakeup.So it just looping wakeup even I safely remove the drive.But it only trigger once but it's troublesome when it auto restart even I plug out the drive.13:42
bumbarEriC^^: ok13:42
hyperspaceHi all, I'm running Ubuntu 14.04 LTS and I have an issue with the rc.local file. The scripts whithin the the rc.local file are not running at startup. The file attributes are "-rwxr-xr-x 1 root root 454 Nov 23 12:47 rc.local". After the system boot, I can succesfully start all the scripts withing the file by simply executing the rc.local file (/etc/rc.local). So it seems that the rc.local file is not executed at system boot. Can someone he13:43
TJ-hyperspace: have you but the scripts being called *before* the final "exit 0" in that file?13:43
hyperspaceTJ-: yes, exit 0 is the LAST line in the file13:43
EriC^^what scripts13:44
hyperspaceTJ-: I have also tried removing the -e flag from /bin/sh13:44
TJ-hyperspace: have you ensured all your sub-scripts return success too?13:44
hyperspaceTJ-: well, if I execute the rc.local file after the system boots, all the scripts run succesfully13:45
hyperspaceEriC^^: some iptables scripts13:45
nbusroneTJ- : Hi again :)13:45
bumbarEriC^^: should i follow http://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu-live-cd starting with chroot part?13:46
hyperspaceTJ-: I have two iptables scritps in the rc.local file (one for ipv4 the other for ipv6), if I run them individualy and run "echo $?" after their exection, I get "0"13:47
EriC^^bumbar: hmm, did you type the mount command?13:47
bumbaryeah, it's mounted ok13:47
EriC^^bumbar: ok, type sudo mount /dev/sda1 /mnt/boot13:48
hyperspaceTJ-: brb in 5 min13:48
bumbarEriC^^: done13:48
EriC^^bumbar: for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done13:48
EriC^^bumbar: sudo chroot /mnt13:49
EriC^^update-initramfs -u -k all13:49
bumbarEriC^^: http://pastebin.com/Dw3t7LhK13:51
EriC^^bumbar: dpkg -l | grep linux-image | nc termbin.com 999913:52
TJ-hyperspace: ok, so /etc/init.d/rc.local is the init script for /etc/rc.local. I'm not seeing any job calls it though13:52
bumbarEriC^^: nc: getaddrinfo: Temporary failure in name resolution, but here's the output http://pastebin.com/SuxCQjiW13:53
EriC^^bumbar: which ubuntu did you upgrade to? 15.10?13:54
bumbaryeah, from 14.0413:54
EriC^^bumbar: how'd you do that?13:54
bumbarEriC^^: do-release-upgrade  -d13:56
lotuspsychjebumbar: its not reccomended to upgrade LTS to non-lts13:56
EriC^^bumbar: ok, type apt-get purge linux-image-3.13.0-{63..68}-generic13:57
bumbari was not aware of that :P13:57
[nitro]helllo ... i switched from nvidia-340 to intel onboard and run intel-graphis installer latest and my ubuntu 15.10 with unity wont come to login screen13:58
hyperspaceTJ-: is there a way to log the exact order in which the scripts are started at boot?13:58
TJ-hyperspace: does "service rc.local start" work correctly? Which run-level is being used (2 is the default for multiuser)? Is the sylink in /etc/rc2.d/S99rc.local ?13:58
hyperspaceTJ-: let me check that13:59
lotuspsychje[nitro]: you should not install intel driver for that, but use nvidia-settings to switch13:59
TJ-hyperspace: the symlink for the active runlevel in /etc/rc<runlevel>.d/S99rc.local is the important bit13:59
hyperspaceTJ-: lrwxrwxrwx 1 root root 18 Jun 10  2014 /etc/rc2.d/S99rc.local -> ../init.d/rc.local14:00
[nitro]lotuspsychje, how do i just install nvidia-settings ?14:00
lotuspsychje[nitro]: install nvidia-prime and enable your nvidia driver14:00
voozeIs anyone using intel rapid start + the partition for it? I got it working but sometimes the laptop will wake at random (probably intel rapid start wakes it, but does not shut down again) Did not happen before I testet intel rapid start.14:01
=== mosene_ is now known as mosene
[nitro]my nvidia card is removed only intel onboard left14:01
lotuspsychje[nitro]: then you can enable/disable performance mode in nvidia-settings14:01
[nitro]i only go to x with startx no borders14:01
lotuspsychje[nitro]: dont use startx mate14:02
bumbarEriC^^: purging done14:02
EriC^^bumbar: ok, type apt-get install --reinstall linux-generic14:02
lotuspsychje[nitro]: any reason you disable nvidia?14:02
[nitro]probably broken fan is stopped working14:02
bumbarits installed14:02
[nitro]i need that mascine14:03
[nitro]now doesnt work gui14:03
lotuspsychje!recovery | [nitro]14:03
ubottu[nitro]: If your system fails to boot normally, it may be useful to boot it into recovery mode. For instructions, see https://wiki.ubuntu.com/RecoveryMode14:03
EriC^^bumbar: ok, type dpkg -l | grep linux-image14:04
[nitro]i can come to terminal login with user14:04
[nitro]only lightdm doestn start or i dont know why14:04
nbusroneTJ- : Hi on the previous day you mention on my HD wakeup option , here's the pastebin http://pastebin.com/vtqkeuUv vs http://pastebin.com/QHhrEgtC14:04
bumbarEriC^^: http://pastebin.com/rhUk8gXh14:05
nbusroneTJ- :  sudo dd of=/sys/bus/devices/4-1" ?14:05
lotuspsychje[nitro]: the problem is you disabled nvidia and cant fallback to the intel driver14:05
lotuspsychje[nitro]: try the recoverymode/fix broken packages14:05
[nitro]ok i will try now wait a sec14:06
EriC^^bumbar: ok, type apt-get purge linux-image-extra-3.13.0-32-generic14:06
bumbaranother purge completed14:07
EriC^^bumbar: ok, type grub-install --recheck /dev/sda14:07
EriC^^bumbar: actually, try to reinstall the grub package as /boot was out of space at the time of the upgrade14:08
EriC^^bumbar: type dpkg -l | grep grub14:08
=== b is now known as Guest29128
hyperspaceTJ-: I've also checked the /var/log/boot.log file, I don't see any errors. Is it possible that some of the daemons that run before the rc.local might affect its execution?14:09
bumbarEriC^^: grep returned nothing, and i can't install grub package because it has issues resolving urls14:09
[nitro]lotuspsychje, it removed something now rebooting14:11
EriC^^bumbar: are you sure you typed dpkg -l | grep grub ?14:12
[nitro]lotuspsychje, still com in low graphics mode and suggest do setup ... i alway get xorr14:13
[nitro]xorg.conf with some basic nvidia settings14:13
[nitro]and somethigh else i did some commnd with echo to put nouveau inside didnt removed that yet14:15
[nitro]that was mistaken but done14:15
lotuspsychje[nitro]: can you boot into your desktop now?14:17
[nitro]no it puts me in terminal after seeing lightdm stat14:17
[nitro]its intel g41 card onboard14:19
keyfIs there a way to increase entropy generation on ubuntu? I'm trying to read a few kb from /dev/random and its been 30 minutes already14:19
finn_Hi everyone14:20
=== finn_ is now known as PITBEAST
bumbarEriC^^: http://pastebin.com/sFKngd2P14:21
PITBEASTcan anyone help with repairing a corrupt/truncated .zip using ubuntu?14:22
EriC^^bumbar: ok, try apt-get update , then apt-get dist-upgrade ,14:24
EriC^^bumbar: don't install grub, as it's the legacy one, install grub214:24
[nitro]graphics is intel 4 series rev 0314:24
[nitro]says lscpi14:24
bumbarEriC^^: can't update :/ http://pastebin.com/DXtsR1MJ14:25
EriC^^bumbar: you have 16.04 right now btw14:25
lotuspsychje[nitro]: if recoverymode cant get you in, you might need a reinstall14:25
[nitro]i try again14:26
EriC^^bumbar: hmm, ok, try grub-install --recheck /dev/sda14:26
EriC^^then update-grub14:26
keyfIs there a way to increase entropy generation on ubuntu? I'm trying to read a few kb from /dev/random and its been 30 minutes already14:26
EriC^^then type exit and see if it boots first14:26
lotuspsychjePITBEAST: i think corrupted archives cant be repaired14:27
bumbarEriC^^: grub is not installed, and i can't install it :o14:27
PITBEAST@lotuspsychje okay, thanks. I just tried zip -FF command in console and it output "Missing end (EOCDR) signature..."14:27
EriC^^bumbar: ok, can you ping stuff properly? like ping google.com ?14:28
bumbarit says unknown host14:29
EriC^^bumbar: try ping
bumbarbut ifconfig shows eth0 has local ip14:29
EriC^^bumbar: oh ok14:29
bumbaryeah, pinging by ip works14:29
starlighterAnyone know how I can execute a bunch of export * statements from a file?14:29
EriC^^bumbar: type exit14:30
EriC^^bumbar: then type sudo cp /etc/resolv.conf /mnt/etc/resolv.conf14:30
PITBEASTlotuspsychje: okay, thanks. I just tried zip -FF command in console and it output "Missing end (EOCDR) signature..."14:30
starlighterI have a bunch of export A=B export C=D in a file but when I do ./laod-env.sh -- nothing gets defined14:30
EriC^^then type sudo chroot /mnt14:30
BluesKajHiyas all14:30
bumbarEriC^^: working now, updating and installing grub14:31
EriC^^bumbar: ok, grub2 right?14:31
bumbaryes :)14:31
simonelloleave #ubuntu14:32
EriC^^bumbar: ok :)14:32
[nitro]lotuspsychje, i did command sudo apt-get purge nvidia* is this wrong did delete something that intel needs ?14:32
bumbarEriC^^: i've installed it and ran grub-install --recheck /dev/sda, no errors reported14:33
EriC^^bumbar: ok, type update-grub14:33
=== davesidious1 is now known as davesidious
[nitro]i still gets in /etc/X11/ file xorg.conf on every reboot with some nvidia parameters thats problem14:34
bumbarEriC^^: a bunch of warnings, but says it found linux and initrd images14:34
killallHello, i need some help, i have 2 usb devices purchased in diferent times and one works and the other does not work. Booth work in windows.   SONiX USB Device in lsusb detects as   0c45:8419 Microdia14:36
EriC^^bumbar: ok, cool14:36
EriC^^bumbar: type exit then try restarting14:36
=== t0xicCode_ is now known as t0xicCode
bumbarEriC^^: ok, see you on  the other side, hopefully :P14:37
simonelloleave #ubuntu14:37
EriC^^good old alt+f4 ^14:38
journeyZcevery one14:38
journeyZcwhat are you doing now?14:39
PiciI'm chatting in #ubuntu-offtopic14:39
cfhowlettjourneyZc, this ubuntu support.  chitchat in #ubuntu-offtopic14:39
killallHello, i need some help, i have 2 usb devices purchased in diferent times and one works and the other does not work. Booth work in windows.   SONiX USB Device in lsusb detects as   0c45:8419 Microdia14:44
nisHi, I recently upgraded my 14.04.2 to 14.04.3 and sysVinit script stopped executing during boot ... for example splunk and rc.local stopped executing, anything changed on 14.04.3 ?14:48
=== Pete is now known as Guest16716
=== tsbtmn_ is now known as tsbtmn
mircx1how is op in here?14:56
SlothfulSlothManis it possible to upgrade without losing your files14:59
wuuSlothfulSlothMan: upgrade what ?15:01
freakyySlothfulSlothMan: u can upgrade ubuntu without losing ur files. i dont think ull lose anything15:01
SlothfulSlothManhow would you do that freakyy15:05
freakyySlothfulSlothMan: simply do an upgrade - ur home directory will stay its only the system thats updated15:06
freakyyusing apt-get15:06
freakyytry googling ubuntu upgrade15:06
SlothfulSlothManoh wow that's neat15:06
wuuSlothfulSlothMan: do you mean you want to change from 14.10 to 15.0415:06
wuugive us a little more information15:06
wuuor just have your applications up to date15:07
nisHi, I recently upgraded my 14.04.2 to 14.04.3 and sysVinit script stopped executing during boot ... for example splunk and rc.local stopped executing, anything changed on 14.04.3 ?15:07
NJRAnyone here?15:12
=== ema_ is now known as Guest8874
NJRAnyone online here?15:14
HackerIIplease deposit $1 for the next 3 answers.15:14
cfhowlettNJR, you don't ask ubuntu questions, you get no answers ...15:15
EriC^^NJR: this is just a social experiment15:16
MonkeyDustNJR  what brings you here15:16
NJRIs everyone here are newbie to ubuntu?15:16
cfhowlettNJR, no15:16
NJRI wanna asks a question. May I ask?15:16
cfhowlett!ask | NJR as we keep telling you ...15:16
ubottuNJR as we keep telling you ...: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience15:17
NJRI am currently new to Ubuntu. And I want to contribute the Ubuntu Community. What should be my first step towards it(aiming to be a top contributor!)?15:17
cfhowlett!contribute | NJR15:17
ubottuNJR: To contribute and help out with Ubuntu, see http://community.ubuntu.com and https://wiki.ubuntu.com/ContributeToUbuntu15:17
NJRAnd I am also a participant of GCI15:18
Xat`hi guys15:20
Xat`I'm using 15.04 and I installed xen-hypervisor15:20
MonkeyDustXat`  is that a server? if yes, there's also #ubuntu-server15:21
Xat`I'm able to select the good one option at grub screen, but it crashes after "LOADING DOMAIN 0", then reboot15:21
somsip!zh | lancao15:25
ubottulancao: 如欲獲得中文的協助,請輸入 /join #ubuntu-cn 或 /join #ubuntu-tw15:25
lancaohas joined #ubuntu15:26
lancaothis is what15:27
=== Guest8874 is now known as rilamormoloc
Picilancao: This is the official support channel for Ubuntu Linux15:27
MonkeyDustlancao  this is the ubuntu support channel15:27
lancaoni hao15:29
nbusroneAnyone can tech me how to disable USB3.0 wakeup function ?15:33
bumbarEriC^^: hey, it worked, well it boots but after logging in i get immediatly logged out15:35
voozeIs anyone using intel rapid start + the partition for it? I got it working but sometimes the laptop will wake at random (probably intel rapid start wakes it, but does not shut down again) Did not happen before I testet intel rapid start.15:36
EriC^^bumbar: great15:36
EriC^^bumbar: does the guest account work?15:37
bumbarEriC^^: http://paste.ubuntu.com/13477348/ i've deleted some of the old X config files, and tried reinstalling unity, compiz and flgrx15:40
EriC^^bumbar: try sudo ubuntu-drivers devices | nc termbin.com 999915:40
xela2244hi, I'm using ubuntu gnome and when I go on settings I can't change mouse and touchpad speed15:42
xela2244option is blocked15:42
bumbarEriC^^: it returns nothing (i'm logged in through livecd, and mounted the disk)15:43
EriC^^bumbar: oh, type cat /mnt/var/log/Xorg.0.log | nc termbin.com 999915:44
bumbarEriC^^: http://termbin.com/8oax15:45
EriC^^bumbar: try sudo mount /dev/sda1 /mnt/boot15:46
EriC^^then for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done15:47
=== jakeFat is now known as tp43_
bumbarand then?15:47
EriC^^sudo chroot /mnt15:47
bumbarand then?15:48
EriC^^dpkg -l | grep "fglrx" | nc termbin.com 999915:49
EriC^^bumbar: try apt-get dist-upgrade15:51
bumbari've tried that several times, with updating and normal upgrading, but they both report nothing to upgrade15:52
EriC^^bumbar: then apt-get install --reinstall xserver-xorg xserver-xorg-core xserver-xorg-video-radeon xserver-xorg-video-ati fglrx fglrx-core libgl1-mesa-glx libgl1-mesa-dri15:53
xela2244Why ubuntu is not letting me change pointer speed from settings?15:55
requiesthi all15:56
lkeijserhi, is the output of 'ufw status' in the same order as iptables would parse them?15:56
bumbarEriC^^: it's done, should i reboot?15:58
EriC^^bumbar: yeah15:58
EriC^^type exit, then reboot15:58
=== bleepy_ is now known as bleepy
=== ha is now known as _ha
=== jacekn_ is now known as jacekn
_hawhois _ingo16:02
ki7yywhen I run emerge - av ubuntu-software-center portage doesn't find it. Any help?16:05
Seveaski7yy: try #gentoo :)16:06
Seveasthough I don't want to know what kind of frankensystem you have that has emerge and ubuntu-software-center. So I'm going to assume that that was a poor attempt at trolling, it's the saner alternative...16:07
=== Nigel is now known as Guest44393
ki7yyhey it is a fun way to say 'good day' and see if my friends are in.16:08
ki7yySeveas: btw this is an iMac running osx so there is no help for me.16:08
Seveaski7yy: no, you're very far beyond help I'm afraid. Please visit your local insane asylum :)16:09
ki7yySeveas: I dwell there. Rather than suffer from insanity I rather enjoy it.16:10
Seveaski7yy: you should join us in #ubuntu-offtopic, you'd fit right in (and that would leave #ubuntu for actual support questions)16:10
ki7yyok works for me16:10
sammy007is it possible to make upstrat script depend on redis-server? start on started redis-server does not work for me16:12
requiesthow to login without user name and password in terminal mode i am not using xwindows in ubuntu linux 15.0416:15
MonkeyDustrequiest  so no GUI?16:18
sammy007well, this channel does not make sense, it's polluted16:19
jellybeamdoes anyone know if systemd 228 will be available later for 15.10?16:19
bumbarEriC^^: didnt work16:19
zteamjellybeam, there seems to be a ppa for that if nothing else16:22
zteamjellybeam, https://launchpad.net/~pitti/+archive/ubuntu/systemd16:22
MonkeyDustjellybeam  but ppa's are not supported here16:23
killallHello, i need some help, i have 2 usb devices purchased in diferent times and one works and the other does not work. Booth work in windows.   SONiX USB Device in lsusb detects as   0c45:8419 Microdia16:23
zteamkillall, have u tried to reformat it?16:23
jellybeamzteam: thanks for the link.16:24
killallzteam,  yes :) it works on ubuntu 10.04 but not 14.04 :/ strange?16:24
zteamkillall, that sounds very strange indeed, does both sticks show up correctly with lsusb?16:26
requiesthow to login without user name and password in terminal mode i am not using xwindows in ubuntu linux 15.0416:27
killallzteam,  booth shows nicely in lsusb16:27
zteamjellybeam, no problem, I don't know reliable the ppa is thought, and I highly recommends you to install ppa-purge before, you try it, if you decide to try it16:28
requiesthi all16:28
requiesthow to login without user name and password in terminal mode i am not using xwindows in ubuntu linux 15.0416:28
MonkeyDustrequiest  you want to disable the password?16:29
requiestyes an automatic login16:29
anheruhey, i have problem with wifi on ubuntu, is there anybody who can help me with it?16:30
SlidingHorn!patience | requiest16:30
ubotturequiest: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/16:30
zteamkillall, my guess is that Ubuntu 15.04 seems a damaged filesystem on this usb-stick which Ubuntu 10.04 does somehow miss, I do suggest you run a sudo fsck -a /dev/sdb1 on your usb stick and see if that solves the problem16:31
killallzteam, it is not a usb stick, its a touchscreen16:31
killallzteam, works on windows ubuntu 10.04, ubuntu 14.0416:32
zteamkillall, a Wacom tablet or somwthing similair?16:32
=== m is now known as Guest39182
MonkeyDustrequiest  is this useful http://askubuntu.com/questions/304964/disable-password-prompt-upon-startup-in-ubuntu-server16:34
killallzteam, wivitouch 19'' touch screen16:37
killalli have 50 of them (new batch) and does not work on 14.04 :( neither 15.0416:37
killallzteam,  the old batch works all the way16:37
requiestexec /sbin/getty -8 38400 tty1 -a and user name this dint worked16:38
zteamkillall, and the new ones work only with older Ubuntu versions such as Ubuntu 10.04?16:40
killallzteam,  you got that right!16:41
zteamkillall, If I were you I would search for wivitouch in Synaptic and see what shous up16:41
bumbar_EriC^^, ati drivers arent working. i've purged them and was able to login16:42
zteamkillall, then compare that to the packages in your older Ubuntu install and see if you can find anything missing16:42
killallzteam,  i guess it is the multitouch16:42
zteamkillall, I have no idea really :-)16:46
killallzteam,  thanks but nothing shows up on screen in synaptic or anywhere else16:46
=== poopnfrsh is now known as popnfresh
=== zengine_ is now known as zengine
requiesti am using ubuntu 15.04 desktop in tty mode no xwindows. from the local user profile  using telneting to access Rehat linux server to login16:49
sysfaultdoes ubuntu use binary packages? wanna do an install for an old laptop16:51
akiksysfault: yes, binary packages16:52
zykotick9sysfault: yes (it's NOT source based, few distros are...)16:52
akikmaybe there was something in that question that i didn't get16:53
sysfaultsweet should be great for my old lappy then16:53
zykotick9sysfault: you might want to check out lubuntu or xbuntu for an older system16:53
Na3iLBilel_mk, What was your question?16:54
Bilel_mkhi every one ! can someone help me how can i see my battry level from terminal ??16:54
zykotick9Bilel_mk: "acpi"16:54
=== ryan_ is now known as SlidingHorn
zteamkillall, well, the only advice I can give you is to check the modelnumber on the tablet and google that16:55
zteamand Ubuntu16:55
=== caius is now known as Guest98228
sysfaultzykotick9: sure thing16:56
TJ-Bilel_mk:  "for N in /sys/class/power_supply/BAT*/*; do [ -f $N ] && echo $N = $(cat $N); done "16:56
zteamkillall, then you probably can find out which drivers it is using16:56
Bilel_mkthank you ervery one acpi work16:57
Bilel_mk acpi16:57
Bilel_mkBattery 0: Discharging, 69%, 02:23:00 remaining16:57
anheruhey, i need help with wifi problem16:59
anheruthere is anyone who can help me?17:00
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience17:00
SlidingHornJust try to give as much info on one line as possible, and someone will eventually try to help if they can :)17:01
Bilel_mkhi every one ! can someone help me how can change background from terminal [i use awesome]??17:01
zteamkillall, hmm, looks like I find something for you.... check if you have that package installed  xserver-xorg-input-mutouch17:01
zykotick9Bilel_mk: one option, install feh, and run "feh --bg-tile /path/to/file &"17:02
SlidingHornBilel_mk, are you using "beautiful" for theming?17:02
anheruwow, just got kicked from here O_o17:02
zykotick9Bilel_mk: oh, that's using --bg-tile, but there is also --bg-fill and others...17:03
killallzteam, one sec :)17:03
killalli did not in the 14.0417:03
anheruubuntu 14.04 lts, atheros qca9565, wifi connection lost all the time - anybody can help me with it?17:04
zteamkillall, other interesting packages seems to be xserver-xorg-input-mtrack xserver-xorg-input-multitouch17:05
=== konrad is now known as Guest29840
anheruubuntu 14.04 lts, atheros qca9565, wifi connection lost all the time - anybody can help me with it?17:06
Bilel_mkzykotick9 how i use it exactly ? i install feh17:07
SlidingHorn!wifi | anheru, have you been through these links yet?17:07
ubottuanheru, have you been through these links yet?: Wireless documentation, including how-to guides and troubleshooting information, can be found at https://help.ubuntu.com/community/WifiDocs17:07
zykotick9Bilel_mk: and run "feh --bg-fill /path/to/file &"17:07
zteamBut I think xserver-xorg-input-mutouch is what you are lacking,  "This package provides the driver for Microtouch input devices with firmware17:08
zteamversion 2", considering that lsusb shows your device as Microtouch I would defintetly try to install that package17:08
jackhumMy Ubuntu running laptop is jumping to 80 degree Celsius with just 4 tabs on Firefox and music player17:08
=== joyce___ is now known as joyce_
jackhumThis thing is freaking me out. Can anyone tell me what is the solution to problem17:08
Bilel_mkzykotick9 , thank you again it work perfectly !17:09
=== thomas_ is now known as Guest35840
zykotick9Bilel_mk: note, in awesome - if you change themes it'll change the wallpaper (or if you restart awesome), so ideally you set you wallpaper with the theme's config files.  /me doesn't use awesome anymore, but did ;)17:10
killallzteam,  thanks installing themn :)17:11
zteamkillall, no problem, hopefully one of them should do the trick17:11
freakyyhi all. is there a way i can get different window icons for ubuntu? like the ones currently active are too small imo ... would like something bigger17:13
darkhawkAny Ideas -> https://answers.launchpad.net/ubuntu/+question/27503317:13
anheruSlidingHorn yes i did, it didn't helped17:13
freakyyi mean the icons with which u close maximize etc. windows17:13
SlidingHornanheru, so you're able to connect, but the connection is "spotty"?17:14
anheruSlidingHorn, yes17:14
SlidingHorn!theme | freakyy17:14
ubottufreakyy: Find your themes at: http://www.gnome-look.org - http://art.gnome.org - http://www.kde-look.org - http://kubuntu-art.org - http://themes.freecode.com/tags/theme - http://www.guistyles.com - https://wiki.ubuntu.com/Artwork/ - Also see !changethemes and https://help.ubuntu.com/community/UbuntuEyeCandy17:14
zteamfreakyy, icons on your desktop can be changed just by rightclicking on them and drag the to your deisired size :-)17:17
anheruSlidingHorn any idea what to do?17:17
freakyyzteam: no i mean the icons u maximize close, minimize windows with17:17
freakyythose on the upper left side on windows17:17
SlidingHornanheru, I'm pretty much a novice myself, but I'm googling like mad! :)17:18
loggloghello everyone17:18
Bilel_mkhi every one ! can someone help me how can i add to my desktop a wigdet  [i use awesome]??17:19
freakyyi have another question. my terminal bell doesnt work with gnome-terminal ... is there any way i can get it working?17:20
freakyyit should make a sound on the normal pc speakdes whena terminal ('\a') is recieved17:20
TJ-anheru: check the interface's power-saving mode. some devices are very aggresive in switching to power-saving modes17:20
anheruTJ- it's turned off17:21
anheruhere is the wireless-script test result with all informations: pastebin.ubuntu.com/13461918/17:21
TJ-anheru: check /var/log/syslog for indications of the link dropping, and if so, what the wpa_supplicant 'reason code' is17:22
amnixHi. I am currently using ubuntu 14.04.03. Should I upgrade to the latest version, 15.10?17:22
zykotick9freakyy: wow, i'm at the opposite end - i go to the extent of blacklisting the required module, so i never hear the hardware-beep in a terminal /me had nothin' on why gnome-terminal beep isn't working though, good luck.17:22
=== ppf_ is now known as ppf
Bilel_mkhi every one ! can someone help me how can i add to my desktop a wigdet  [i use awesome environement]??17:23
zykotick9Bilel_mk: i'd suggest finding a channel for awesome...  i doubt #ubuntu is the best place to be asking...  good luck though.17:23
freakyyzykotick9: hehe ok ;D17:24
TJ-anheru: well, it looks pretty clear there. Your AP is on the same frequency as 2 others (2462MHz) and close to some other operating channels to, so I'd guess there's interference17:24
Bilel_mkzykotick9 , i am using ubuntu but i add to it awesmone environement17:24
TJ-anheru: try switching to use 802.11a (5.xGHz band) if at all possible17:24
freakyyzykotick9: in the soundsettings u can disable notification sounds17:24
zykotick9Bilel_mk: asking here is fine... i just doubt there are many awesome users here... YMMV.  good luck.17:25
zteamfreakyy, did you check your sound settings?17:25
anheruTJ- ok brb need to relog to other pc so i can use ubuntu here17:26
Bilel_mkzykotick9 , ah okay thank you  i interstand17:26
TJ-anheru: If the 9565 can't do 802.11a, then you're kinda stuck17:26
freakyyzteam: yes i checked them - its all enabled17:26
SlidingHornBilel_mk, FYI, their IRC channel is #awesome on the OFTC server :)17:27
TJ-anheru: you could try forcing your AP to use channel 13, instead of 11, although there's still overlapt there it might be slightly better17:27
=== devon is now known as G33KY
=== G33KY is now known as Guest8430
=== Monthrect is now known as Piper-Off
zteamfreakyy, event sounds too?17:30
TJ-anheru: try the AP on channels 1 or 13, with 1 possibly - when the wireless info report was generate - being the better channel. You'll need to disable auto-channel selection so the AP doesn't hop channels, too17:30
loggloghey ppl is there a way i can test my microphone without downloading any software?17:32
TJ-logglog: 'alsaloop' tool from the alsa-utils package (if its installed)17:33
=== lucas_ is now known as Guest96787
SlidingHornlogglog, System Settings > Hardware > Sound (or click the speaker icon on the menu bar) & select "Sound Settings", then the "Input" tab, select the device & make sure it's not muted.  You should see an active input level as you use your mic17:34
zteamfreakyy, as for your other question you can try to install gnome tweak tool from software center, it seems to able to change the min, max and restore buttons on the window title, but I'm not sure17:34
=== kervin is now known as Archie
=== moz is now known as Guest6083
=== CarlFK1 is now known as CarlFK
nbusronehi , anyone know how do we check for which file having pending sector or badblock on a hard disk ?17:35
=== cyphase is now known as Guest95609
Bilel_mkhi every one ! can someone help me how can i change my keyboard input from qwerty to azerty from terminal ?17:36
anheruTJ- ok i switched off 'enable auto channel scan' and selected channel 1317:36
nbusroneSimples way to check for newbie ?17:36
zteamyes, that's very easy, just click on speaker icon besides your clock and go to sound settings -> input device -> record sound from and choose your device, if it register any sounds it should show up there17:37
anheruTJ- what now? btw i don't think it's AP problems cuz for example now ubuntu cant find any wireless networks...17:37
TJ-anheru: you're in a congested area, those other APs amy also change channels, so you'll need to keep a watch in it. The best channels, due to them not overlapping others, is 1, 6, 13, but you'll find most APs will choose those, or channels nearby17:37
SlidingHornBilel_mk, this should work: http://askubuntu.com/questions/550937/change-from-qwerty-to-azerty-in-command-line17:37
TJ-anheru: what country are you in?17:37
anheruTJ- gb17:38
TJ-anheru: the region makes a difference. In Europe we have 13 channels... and the AP and the PC should figure out the correct region and set limits accordingly. If your PC is not seeing the AP on channel 13, that suggests the PC has the wrong region set. Try "sudo iwlist wlan0 scan" and see if your AP shows up17:39
anheruTJ- after switch off & switch on whole wireless 3 times, it found networks, but still cannot connect17:39
TJ-anheru: your log shows the PC knows it is in the GB Europe region "ath: Country alpha2 being used: GB"17:40
logglogSlidingHorn: TJ-:   thank you, worked well :)17:40
SlidingHornlogglog, happy to help17:40
Bilel_mkSlidingHorn , thank you17:41
TJ-anheru: "tail -f /var/log/syslog" and do you see attempts to connect to the AP?17:41
anheruTJ- for example now i trying to connect and it shows password window over and over again...17:41
MWManybody home?  Im using a tutorial for an old version and I think the locations of certain directories have changed17:42
TJ-anheru: try changing the AP's channel to 1, let's find out if that is caused by using channel 13, or something entirely different17:42
anheruTJ- yes17:42
nbusroneSimples way to check for newbie ?17:42
SlidingHornMWM, what are you trying to do?  What version & flavor of *buntu are you using, etc.?17:43
nbusronehow to copy a bad sector block on a hard disk ignoring them ?17:43
MWMhttp://ubuntuforums.org/showthread.php?t=1022411  Im trying stop 3 but these directoreis seem not to exist or to have moved.17:43
MWMIm currently on 14.04.3 x64 desktop version17:44
zteamnbusrone, Yes, there is a very easy to use tool for, built in to ubuntu17:44
=== RCL_ is now known as RCL
voozeAnyone running ubuntu 14.04 + using google chrome? Can you get the icon to show up in the top bar? I have tried disabling/enabling various things. Nothing works :/17:45
anheruTJ- so i changed channel to 1, turned off wireless in ubuntu, turned on, and there is no networks found again, empty list17:45
nbusronezteam : which tools for it ? I downloaded GsmartControl mention I had 1 pending sector that had grow to 85 right now17:45
JesterboxboyI somehow fucked up up my graphics setting on my ubuntu with an nvidia driver install17:45
zetheroomight be an odd question - but when both wifi and ethernet are connected in Ubuntu which connection is used?17:45
TJ-anheru: that is very strange behavior. Do you have a wifi enabled phone that can see the AP?17:45
zteamnbusrone, just search for disc in unitys searchbar and it will get you right to the disc manager from there you can easy check ytour hard drive17:45
MonkeyDustJesterboxboy  avoi the f-word17:45
Jesterboxboyi remove purged all nvidia-* packages and moved the xorg.conf to somewhere else, but i still cant see unity when i start up17:45
Jesterboxboy@MonkeyDust sry my fault17:46
MWM@jesterboxboy , can you get CLI with ctl + alt f1?17:46
anheruTJ- this log command you gave me shows "<info> (wlan0): supplicant interface state: disconnected -> inactive"17:46
nbusronezteam : which tools and how do I do it ?17:47
SlidingHornvooze, are you talking about the top panel (i.e. where the clock, network status icon, etc. are?)17:47
anheruTJ- i have wifi enabled on other pc (im using now to speak to u) and it work great17:47
mohi folks17:47
anheruTJ- on phones it work good as well17:47
=== mo is now known as Guest90945
Guest90945i am running gnome3 .. just installed it .. how can I make the dot become visible not only in the "hud"17:48
anheruTJ- only ubuntu have problems with it17:48
Guest90945i mean dash17:48
zteamsearch for disc in Unity and you will see dicc manager, from there you just select your harddrive and go the chuggwheel and select self-test17:48
freakyyzteam: ok thanks :D17:48
MWMIm trying to remove NIC drivers using http://ubuntuforums.org/showthread.php?t=1022411 tutorial, but the files seem to have moved or changed locations for 14.04, anyone know the correct paths?17:49
voozeSlidingHorn: yes, do you have a google chrome there in there?17:50
voozeicon *17:50
zteamnbusrone, it seems to be called Disk Utilty in english17:50
zteamnbusrone, https://www.google.se/search?q=ubuntu+disc+manager&client=ubuntu&hs=UNx&channel=fs&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjJoom4jafJAhVJCSwKHViQBi8Q_AUIBygB&biw=1855&bih=953#imgrc=JVk3HUcTYrY24M%3A17:50
tokamAfter updating to Ubuntu 15.10 I can not start lightdm anymore. Do you have any suggestions? http://pastebin.info/?paste=267217:51
Jesterboxboy@MWM yes17:51
SlidingHornvooze, well, I'm not running with the default DE, but I'll try to help if I can anyway.  Are you trying to create a launcher that opens chrome when you click this icon?17:51
Jesterboxboy@MWM i just have no real clue what do to, is there some way to set back xorg, or the drivers to default?17:51
MWM@jesterboxboy try logging in and then startx.  should get you to the GUI.  I really cant tell you what to do to permanently fix though.  atleast you have CLI now17:52
nbusronezteam : i know what it calls but how do I determine which files is in a bad sector ?17:52
zteamtokam, sudo dpkg-reconfigure lightdm, is the first thing I would try anyway (aside from restarting the computer that is)17:52
tokamzteam: already tried both17:52
tokamroot@localhost:~# cat /var/log/lightdm/x-0-greeter.log17:52
voozeSlidingHorn: cool :) but no, i'm not. By default google chrome should have an icon there, because it stays running when it close it, unless you unselect Continue running background apps when Google Chrome is closed17:52
tokamError writing X authority: Failed to open X authority /var/lib/lightdm/.Xauthority: No such file or directory17:52
voozeSlidingHorn: just asking if its just me, or if it happens to other people also.17:53
MWM@jesterboxboy  try apt-get xorg?  maybe remove xorg from whereever you moved it to first?  just gussing man17:53
resolutionHey, I have a question: Is it possible to redirect messages from any linux communicator to terminal ?17:53
Jesterboxboy@MWM mhm nope thats not working, i see the loginscreen when starting up normally and can login, then i get my backgroundimage , but no unity dash, or system bar or anything. the windows that pop up are without borders17:54
maslois there any way to find out why my ssh-rsa key is not working? I used puttygen and loaded my old private key to generate the public key, removed the first 2 line and alst line, added ssh-rsa before the one-lined key, modified sshd_config to use .ssh/authorized_key but still I get server refused key17:54
SchrodingersScatresolution: communicator as in?17:54
resolutionfor example. But empathy would be ideal.17:55
zteamnbusrone, which file? I don't know any tool for that, you should try run a fsck on the disk that should mark the sectors as dirty and move the files to healty sectors automatically17:55
akikmaslo: you can save the private key in openssh.com format from the top menu, no need to edit it17:55
masloprivate key isn'T the issue, the public one is17:55
anheruTJ-, syslog "kernel: [ 1404.228328] wlan0: deauthenticated from e8:cc:18:0f:48:78 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)17:55
masloI am using my old private key from before i upgraded my ubuntu from 12.04 to 14.0417:55
masloand i tried using the same .ssh/authorized_key file onn the 14.04 fresh install andn it doenst work17:56
akikmaslo: the public key is in the text box, no need to edit it either17:56
SchrodingersScat!info finch | resolution, there's finch, also something called bitlbee for moving other chat protocols to irc clients17:56
ubotturesolution, there's finch, also something called bitlbee for moving other chat protocols to irc clients: finch (source: pidgin): text-based multi-protocol instant messaging client. In component main, is optional. Version 1:2.10.11-0ubuntu4 (wily), package size 217 kB, installed size 860 kB17:56
maslolet me retry akik...17:56
zteamnbusrone, As a harddrive detects bad sectors, it try to reallocate those sectors into healthy ones, thus moving the files automatically17:56
zteamnbusrone, if it can17:56
parapanHi ppl; strange situation . ..I copy a file via scp to ubuntu 14.04 but I used a wrong syntax "\" instead of "/" now I have some files of 300 MB in that folder that I cannot delete using rm command ... .. any hints ?17:57
masloyou rock akik, I don't know why I didn'T even think about that...I would export the file and edit it17:57
masloit fixed it17:57
nbusronezteam : Sorry , I still dont understand .If the file is unreadable , how it get move into a healthy sector ?17:59
resolutionSchrodingerScat - thanks.17:59
MWMsudo make install17:59
resolutioni'll try it17:59
MWMwhoops.  wrong keyboard ;)17:59
Paul-ZMmm... I try to install portaudio19-dev via aptitude, but...18:00
ux2This may be off but anyone here know where I can get any user or help for India ?18:00
zteamparapan, it probably created some maps there instead of files, if those are empty just remove them with rmdir or you can try to remove the files rm -f (which means force, but use that with caution18:00
Paul-Zbut, I have to remove jackd and jackd2????18:01
SlidingHorn!in | ux218:01
ubottuux2: #ubuntu-in is the channel for Ubuntu in India18:01
zteamnbusrone, well, sectors most often becomes hard read before they get impossible to read (it takes more and more read attempts), as your drive detects that a sector is hard to read it, will try to move the content into a new sector18:03
MWMstill trying to figure out where these directories from 8.10 have been moved to in 14.04 if anyone in here knows18:03
ux2anyone got my q ?18:03
=== Don is now known as Guest99455
zteamnbusrone, with that said, if the diagnostik tool you run said your harddrive is dying you should hurry to back it up) as the drive doesn't have indefinity spare sectors18:04
ux2where can I get help from Indian user and to get Indian languages?18:05
Paul-Zux2, #ubuntu-in ?18:05
trismPaul-Z: what is: apt-cache policy jackd jackd2 libjack-dev libjack-jack2-dev; (in a pastebin)18:05
ux2no one there Paul18:06
nbusronezteam : Disk utility said ok , 90 bad sector18:06
ux2any Indians here?18:06
zteamnbusrone, as your bad sector numbers seems to grow I would recommend you to try a full selftest from disk utilty and see what it says18:07
nbusronezteam : Do I need to backup first before doing the selftest ?18:08
nbusronezteam : what tools to copy file and ignore bad sector files and display which files are hard to read and skipped it after 1 or 2 retry ?18:08
zteamnbusrone, well, you can do it if you want to, but I don't think it is neccesary18:10
tokamAfter the upgrade to Ubuntu 15.10 the folder for lightdm did not exist so lightdm could not start post booting18:10
MWMIm trying to get NIC drivers working on a fresh install.  Would anyone be able to help?18:10
nbusronezteam : any reason  ? what happen when it got freeze on diagnostik tool and bad sector increase rapidly ?18:12
nbusronezteam : as above which tools to copy file and ignore bad sector files and display which files are hard to read and skipped it after 1 or 2 retry ?18:12
zteamnbusrone, well it depends on how you need to copy18:13
Paul-Ztrism, http://paste.ubuntu.com/13478669/18:14
Paul-Ztrism, I don't want to remove jackd and jackd2.18:15
Paul-Ztrism, http://paste.ubuntu.com/13478687/18:16
nbusronezteam : sorry , I still dont understand , which program does that ?18:16
=== Gill_ is now known as Gill
=== arun_ is now known as Guest13849
=== Piper-Off is now known as Monthrect
MWMhttp://ubuntuforums.org/showthread.php?t=1022411 this tutorial gets the NIC working, but wont survive a reboot then needs to be done again.  I assume because the directories/files have been moved between 8.10 and 14.0418:20
zteamnbusrone, there are 2 tools for recovering files from bad sectors as I know about, first there is Recoverdm (terminal software) https://www.vanheusden.com/recoverdm/ and then there is Roadkils Unstoppable Copier (which has a grahpical interface) http://www.roadkil.net/program.php/P29/Unstoppable%20Copier18:20
anherui need command to allow rsyslog proces write in syslog :)18:20
v2zzcan anybody advice a good serial monitor, moserial  doesn't show ascii and triples messages that i get back18:20
zteamnbusrone, lastly there is  gddrescue, but that mirrors the whole partion18:21
nbusronezteam : anyhow , how do I count bad sector convert to file size ? lets say 1 sector = how many kb or mb ?18:22
trismPaul-Z: sorry I wrote one of the package names wrong, it is: libjack-jackd2-dev18:22
arbcan any one tell the command to mount an iso file at startup18:23
=== BLZbubba_ is now known as BLZbubba
trismPaul-Z: I don't think that's the problem though, it seems to want to have libjack0 installed but that conflicts with jackd2. if you try to remove libjack0 what does it try to remove?18:25
daftykinsarb: why would you?18:25
arbI'm using an iso as a local repo18:26
nectarI've created a desktop entry for, but I don’t know how to add to add an icon to it?18:26
akikv2zz: have you tried minicom? if that is what you mean by serial monitor18:27
v2zznot yet18:27
nectarand i cant find the folder "~/.icons" anywhere.18:28
nbusronezteam : I think I know a better way to check which file are corrupted and unreadable. Copy file by files.USe beyond compare and list every folder . If it can't read it means corrupted right ?18:28
Paul-Ztrism, Mmm... but, how to remove libjack0?18:29
trismPaul-Z: sudo apt-get remove libjack0; see what packages it wants to remove (pastebin it maybe), if it only wants to remove that one package then you can probably just remove it18:30
rouge_I git (I think) a QT bug with ffado-mixer (and mayby qjackctl) : sometimes way I do a "drag and drop" gesture in the middle of a window : the mouse got stalled18:31
nbusronezteam : thanks , I'll do it tomorrow :)18:31
nbusronezteam : thanks for the help18:31
Paul-Ztrism, but... I have not install libjack0.18:31
rouge_actually everything works, but the controls. I can move the mouse but it's stuck with the "closed hand pointer" and can't click18:31
rouge_keyboard works to change workspace but not to access apps functions18:32
Jesterboxboyi have a problem with my ubuntu install(since 14.10) when i start i get into the lgm login mask, then i log in and get my background image but unity does not load.18:32
Jesterboxboywhen i switch to console, i can start it manually with unity though. In the syslog i found this and error unity-settings-daemon)WARNING Attempted to init Xsync, found version 3.1 error base 134 event base 8318:32
zteamnbusrone, the way I would do it is by using fsck /dev/sda1 -V (assuming sda1 is the faulty disk)18:32
=== ema_ is now known as Guest2177
trismPaul-Z: the aptitude command seems to think it either is or needs to be18:33
Paul-Ztrism, in fact, I want to install PyAudio, but I got errors, and I searched on web, they said, I should install portaudio19-dev.....18:33
zteamnbusrone, I belive it should tell you how many megabytes  is corrupted18:33
arbmounting an iso in bootup ??18:33
zteamdaftykins, right partion, not the drive18:33
zteamdaftykins, thanks for correction daftykins :-)18:34
* daftykins tips hat18:34
Paul-Ztrism,  so, I should try to use apt-get installing portaudio19-dev?18:34
daftykinsarb: ISO for repos, so you'll remain permanently out of date? 0o18:35
nbusronezteam : ok , thanks , now it goes to 90 , I count 1 sector = 512 bytes and 90 sector = 512x90 / 2 =23mb ?18:35
trismPaul-Z: alright, instead pastebin the output of this command: sudo apt-get install -o Debug::pkgProblemResolver=yes portaudio19-dev; (it's going to be alot of output)18:35
arbdaftykins: Nop18:36
zteamarb, there is package called grub-imageboot which should allow you to boot isos directly from grub, but I don't know how to use it, sudo apt-get install grub-imageboot should be a good start I guess... :-)18:36
s0k_iTim new to linux a good a python/text editor I can install18:37
s0k_iTbah meant to say whats a good text editor18:37
zteamnbusrone, I belived it does print the the info in Megabytes, then fsck is finsihed (at least checkdisk on windows does, so I guess fsck should do it too)18:38
arbzteam: 10x alot18:38
zteamarb, no problem :-)18:39
iorias0k_iT, geany is a simple editor that lets you write/compile/execute c, c++, java, bash, python18:39
zteams0k_iT, while I haven't programmed in years myself I think anjuta should be quite nice for python :-)18:40
agent_whiteKinda funny how it says it's a "text editor" when it compiles/executes code. :P18:41
Paul-Ztrism, http://paste.ubuntu.com/13478960/18:41
Paul-Ztrism, yes, a lot of....   ;)18:41
guruprasadI installed Ubuntu GNOME 15.10 on my desktop with Asus Z170-K motherboard and legacy mode enabled. The drive is formatted with GPT and already has Windows on it.18:43
guruprasadWhen I booted after installation it went straight to Windows 10. But manually opening the boot menu and selecting the hard drive as the boot device instead of the Windows boot manager boots into Ubuntu18:43
trismPaul-Z: actually it wasn't very much, it is usually 4x that18:44
guruprasadHow can I get GRUB to show up on boot so that I can pick Windows or Ubuntu?18:44
guruprasadI had created a grub partition during installation but it didn't seem to help18:44
trismPaul-Z: something has to be wrong with libjack-jackd2-0, what is: apt-cache policy libjack-jackd2-0;18:45
=== arb is now known as agar
Paul-Ztrism, http://paste.ubuntu.com/13479015/18:46
daftykinsguruprasad: change the default timeout period - can you get to it manually with pressing escape or holding left shift?18:47
daftykinsguruprasad: it's sounding like a case of installing Ubuntu as EFI beside a legacy Windows to me18:47
trismPaul-Z: hmm that looks fine18:47
guruprasaddaftykins: When the PC boots, it boots into Windows without showing grub18:48
MWMhttps://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows may help with the grub question.  It worked for me a while back.  Im not exactly sure if it applies here though18:48
requiesti am using ubuntu 15.04 desktop in tty mode no xwindows. from the local user .profile  using telneting to access Rehat linux server to login.so would like to bypass user name and password on exit from the server local system should ask the user to restart or shutdown anybody is ther to help18:48
daftykinsguruprasad: what are you typing from right now?18:48
harshainstall in a LiveCD, run it on auto.18:48
harshaIt will take care of you.18:48
daftykinsthat's not wise until more details are gathered18:49
SlidingHornrequiest, I'm not sure I understand:  you want to be able to remotely shut down the RH machine without being prompted for a password?18:49
guruprasad_daftykins: I am sure Ubuntu booted in the legacy mode since booting with the uefi mode dropped me to grub shell18:49
harshaIt removes grub and its config, scans the partitions, and redoes the entire thing. Not sure why you wouldn't just use it.18:49
guruprasad_daftykins: that was during the installation18:49
harshaapologies, I didn't realize you were dealing with uefi mode18:49
daftykinsguruprasad_: ok, so you had the old style purple backed boot menu etc?18:50
guruprasad_daftykins: yes18:50
daftykinsharsha: well, just checking first18:50
Paul-Ztrism, aww... so... It seem that I have to remove jackd, jackd2, qjackctl etc........18:50
daftykinsguruprasad_: and which Windows is it?18:50
requiestno not rh server in local system i installed ununtu 15.0418:50
guruprasad_Actually since it was Ubuntu GNOME, it showed a grey grub kind of menu briefly before booting into Ubuntu GNOME18:50
guruprasad_daftykins: 10 :-(18:51
guruprasad_ux2: hello18:51
trismPaul-Z: no it doesn't make any sense though, try instead: sudo apt-get install libjack-jackd2-dev; to see what happens18:51
daftykinsguruprasad_: nothing wrong with that. so that was definitely installed legacy? are you in 10 now or an ubuntu live session?18:51
requiestserver side redhat linux18:51
guruprasad_Ubuntu GNOME after manually selecting the hard drive as the boot device18:51
guruprasad_By default it looks like it take a Windows boot manager partition as boot device.18:52
requiestclient system are ubuntu 15.0418:52
guruprasad_and it is a UEFI partition18:52
guruprasad_So I am not sure what is wrong and what to do18:52
guruprasad_I don18:52
daftykinsanswering my questions would be a great start18:52
guruprasad_I don't want to boot into Ubuntu by manually selecting the boot device each time.18:53
MAxouHi I want install ubuntu on this computer http://www.pcworld.com/product/30456/dell-optiplex-755.html whiche version should i install ? Ubuntu 14.04.3 LTS or Ubuntu 15.10 ??18:53
MWMBusybox v1.21.1 Enter help for a list of built in commands.  Ugg18:53
Paul-Ztrism, oh! I just have installed libjack-jackd2-dev.18:53
guruprasad_daftykins: I've answered whatever you had asked. In case you have more, please ask them so that I can answer :)18:53
lotuspsychjeMAxou: depends what you want really18:53
daftykinsguruprasad_: you haven't told me what you're booted into right now which i have asked twice.18:53
lotuspsychjeguruprasad_: you didnt, scroll up18:53
lotuspsychjeMAxou: do you need long time support?18:54
guruprasad_Ubuntu GNOME by manually selecting the boot device as my hard disk18:54
guruprasad_daftykins: Installed Ubuntu GNOME after manually selecting the hard drive as the boot device18:55
daftykinsi'm asking what you're typing from... which OS are you booted into - x3 now.18:55
guruprasad_I have answered you. Don't know if you are not getting my ping18:55
Paul-Ztrism, http://paste.ubuntu.com/13479091/18:55
auronandacehe has answered that more than once, he is typing from his installed ubuntu18:55
MAxoulotuspsychje : I want that work fine18:55
lotuspsychjeMAxou: LTS is in most cases a good choice18:56
daftykinsguruprasad_: here's a clue: "i am typing from my ubuntu gnome install" or "i'm typing from my win10 install"18:56
daftykinsyou have not hinted at either18:56
trismPaul-Z: try installing portaudio19-dev again18:56
guruprasad_daftykins: I am typing from the installed Ubuntu GNOME which I booted by manually selecting my hard disk as boot device18:57
Octubre2how can i know which is my gnome version??18:57
Octubre2using Ubuntu 15.1018:57
guruprasad_actually it could be the root partition and not the hard disk. Not very sure18:57
Paul-Ztrism, OH!!! Thank you indeed! you are brilliant! haha18:57
lotuspsychjeOctubre2: did you install ubuntu-gnome?18:58
requiestexec /sbin/getty -8 38400 tyy1 pc-1 but no result18:58
daftykinsguruprasad_: yay, ok so run "sudo apt-get install pastebinit" then "sudo parted -l | pastebinit" and share the link here18:58
Octubre2nope lotuspsychje , i'm on unity, but it use gnome too, not?18:58
SlidingHornOctubre2, gnome-shell --version18:58
Octubre2SlidingHorn, nope, it doesn't exist18:59
Octubre2on my ubuntu18:59
Octubre2i have not gnome-shell18:59
kooperhow i use torrent18:59
lotuspsychjekooper: qbittorrent is nice18:59
trismPaul-Z: excellent, it seems it was confused out to resolve the virtual libjack-dev package, because there is also a real one that depends on libjack0 which wants to remove all the jackd2 stuff18:59
Octubre2Transmission is installed on ubuntu for default19:00
SlidingHornkooper, Transmission is a GUI bittorrent client that is installed by default19:00
lotuspsychje!torrent | kooper19:00
ubottukooper: Some torrent clients: Transmission (GTK and terminal-based), Deluge-Torrent, Freeloader, BitStormLite, BitTornado-GUI (GTK), KTorrent (KDE), QTorrent (Qt), Azureus/Vuse (Java), !Frostwire (Java), TorrentFlux (web-based), bittornado, rTorrent, cTorrent, bittorrent, aria2 (terminal-based) - FAQ: http://www.bittorrent.com/help/faq - See also !P2P19:00
Octubre2you just have to download the torrent and the selected program for default will be transmission in ubuntu19:00
guruprasad_daftykins: http://paste.ubuntu.com/13479154/19:01
kooperoh actually i am new19:01
kooperthnx everyone19:01
Octubre2kooper, you can download torrents in thepiratebay and such19:02
daftykinsguruprasad_: so your windows install was EFI by the looks, and so with a legacy install of ubuntu that's not going to work19:02
daftykins!efi | guruprasad_ read here and convert your install to EFI from legacy19:02
ubottuguruprasad_ read here and convert your install to EFI from legacy: UEFI is a specification that defines a software interface between an operating system and platform firmware. It is meant as a replacement for the BIOS. For information on how to set up and install Ubuntu and its derivatives on UEFI machines please read https://help.ubuntu.com/community/UEFI19:02
daftykinsguruprasad_: until you rework the above, you won't be able to have both load from the same bootloader19:02
lotuspsychjeOctubre2: apt-cache policy gnome-panel (used on unity)19:02
msev-does anyone know what the url for the tile server for google maps satellite image (so i could use it for foxtrotgps), or for bing aerial maps?19:03
EriC^^guruprasad_: need some help?19:03
guruprasad_daftykins: legacy compatibility mode is enabled in the BIOS. When I tried to boot from USB to install Ubuntu, there were 2 devices shown - one with UEFI and other without. The one with UEFI didn't boot and dropped me to grub2 shell.19:03
dymHey! Im on ubuntu running nginx + php-fpm, experiencing " accept4() failed (24: Too many open files)" which is odd, since the filelimit has already been raised. ideas?19:03
lotuspsychjemsev-: is this ubuntu related mate?19:03
guruprasad_daftkins, So I installed by booting from the other device which booted19:03
EriC^^guruprasad_: why is legacy compatibility mode enabled in the bios?19:03
daftykinsguruprasad_: yes that's the problem, you can't have one OS installed in one mode and the other in another... they must be the *SAME*19:03
=== neskau is now known as renanpantoja
Octubre2lotuspsychje, it don't returns nothing19:04
SlidingHornOctubre2, another possible answer is to look at /usr/share/gnome/gnome-version.xml (or /usr/share/ghome-about/gnome-version.xml if you're running gnome 2)19:04
Octubre2i'm using ubuntu 15.10 with unity19:04
freakyyhi all. is there a way to bind the extra mouse buttons of the logitech mx master to keys like next/prev link in browser, and desktop switcher?19:04
Octubre2but i think is using gnome too19:04
Paul-Ztrism, Mmm... I'm trying to undersdand what you said... because, I'm a absolute user.... I mean I'm not a developer, without any programming background....19:04
agent_whitedym: `lsof` and check to see what all the files are that are opened... Do they all need to be opened? Or why haven't they been sent-out and closed?19:05
guruprasad_EriC^^: That was the default and I didn't set it so19:05
Octubre2okey SlidingHorn i think i have 3.16.219:05
EriC^^guruprasad_: you have win8 installed?19:05
guruprasad_EriC^^: Win1019:05
SlidingHorncool, hope that helped, Octubre2  :)19:05
EriC^^ok, are you in ubuntu right now guruprasad_ ?19:05
trismPaul-Z: it's okay it's not really important, basically apt had a choice of 2 packages to install with the same name it and it kept picking the wrong one19:05
agent_whitedym: Otherwise, you can increase the limit of open file descriptors at the OS level.19:05
requiestdaftykins no not rh server in local system i installed ununtu 15.0419:06
Octubre2yes SlidingHorn thanks, but i don't understand why was so difficult to know it :S19:06
trismPaul-Z: but you manually installed the right one so it fixed it19:06
requiestdaftykins client system are ubuntu 15.0419:06
dymagent_white: odd. A lot of socket files19:06
SlidingHornOctubre2, here's a little explanation (in the answer's comments) http://unix.stackexchange.com/questions/73212/how-to-get-the-gnome-version19:06
daftykinsrequiest: i have at no point been speaking to you :)19:06
requiesti am using ubuntu 15.04 desktop in tty mode no xwindows. from the local user .profile  using telneting to access Rehat linux server to login.so would like to bypass user name and password on exit from the server local system should ask the user to restart or shutdown anybody is ther to help19:07
guruprasad_EriC^^: Yes, in the installed Ubuntu GNOME19:07
daftykinsEriC^^: i think converting the ubuntu to EFI would work... but it doesn't sound like i got my advice across19:07
EriC^^ok, type sudo parted -l | nc termbin.com 999919:08
guruprasad_daftykins: I get this error from the boot-repair tool. Not sure what to do since the ubuntu installation usb didn't boot in UEFI mode19:08
ux2guruprasad_: pranam19:08
EriC^^guruprasad_: paste the link it gives you here19:08
SlidingHornI think there may be a language barrier preventing some of us from properly understanding your request, requiest.  What is your native language?  Maybe there's a local Channel where your request might not be lost in translation?19:08
guruprasad_EriC^^: Which link?19:08
EriC^^guruprasad_: the link the command gives19:08
EriC^^daftykins: yeah19:08
Paul-Ztrism, Mmm... Yes, anyway, Thank you!19:08
daftykinsguruprasad_: i did not tell you to run that; i said follow the section of the guide linked for how to convert your ubuntu installation to EFI :)19:08
guruprasad_daftykins: I followed https://help.ubuntu.com/community/UEFI#Converting_Ubuntu_into_UEFI_mode which exactly does what you wanted me to try :)19:09
guruprasad_it suggested installing and using the boot-repair tool to do the conversion19:09
daftykinsok, so what error?19:10
guruprasad_daftykins: http://paste.ubuntu.com/13479207/19:10
EriC^^guruprasad_: did you just paste the boot-repair message?19:11
guruprasad_EriC^^: Yes19:12
EriC^^guruprasad_: type sudo parted -l | nc termbin.com 999919:12
=== Slowrich1rd is now known as slowrichard
daftykinsEriC^^: we have that - http://paste.ubuntu.com/13479154/19:12
EriC^^daftykins: ty19:13
EriC^^guruprasad_: type sudo mount /dev/sda7 /mnt19:13
guruprasad_EriC^^: mounted19:13
EriC^^guruprasad_: type sudo blkid /dev/sda219:14
EriC^^then type sudo nano /mnt/etc/fstab19:14
EriC^^add an entry that says UUID=<uuid from blkid output>/boot/efivfatdefaults0119:14
guruprasad_EriC^^: Done19:15
EriC^^guruprasad_: ok, type sudo mkdir /mnt/boot/efi19:15
=== nady is now known as gabdara
Guest90945in gnome3 the window key + arrow up down right .. seems reserved? i can't find any place to disable the move window in order to use those keys for other stuff... anyone?19:16
guruprasad_EriC^^: done19:16
EriC^^guruprasad_: type sudo mount /dev/sda2 /mnt/boot/efi19:16
guruprasad_EriC^^: done, mounted19:16
EriC^^guruprasad_: for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done19:16
MWMI need to read the smart data from a live disk.  What is the utility19:17
EriC^^guruprasad_: ok, now we need to load the efivars module i think19:17
guruprasad_EriC^^: How do I do that?19:18
EriC^^cause grub needs to use the efivars, and usually they're just there when you boot in uefi mode19:18
lotuspsychje!info smartmontools | MWM perhaps?19:18
ubottuMWM perhaps?: smartmontools (source: smartmontools): control and monitor storage systems using S.M.A.R.T.. In component main, is optional. Version 6.3+svn4002-2 (wily), package size 436 kB, installed size 1525 kB19:18
EriC^^guruprasad_: try sudo modprobe efivars19:18
guruprasad_EriC^^: it ran without any message or error19:19
EriC^^guruprasad_: cool19:19
guruprasad_EriC^^: lsmod doesn't show it19:19
lotuspsychjeioria: add to discuss :p19:19
EriC^^guruprasad_: hmm type ls -l /sys/firmware/efi do you see anything there?19:19
guruprasad_no efi directory in /sys/firmware19:19
EriC^^ok, we'll get to it in a bit i guess19:20
EriC^^guruprasad_: type sudo chroot /mnt19:20
requiestanybody is ther to help on linux server and ubuntu 15.04 client configuration19:20
guruprasad_EriC^^: done19:20
lotuspsychjerequiest: #ubuntu-server19:20
MWMIs there a built in utility for ubuntu to read SMART data?  Ive got no connection right now19:20
EriC^^guruprasad_: type apt-get install grub-efi-amd64-signed19:21
lotuspsychjeMWM: disktool in ubuntu test your smart19:21
requiestnot ubuntu server19:21
guruprasad_EriC^^: "Can't access efivars filesystem at /sys/firmware/efi/efivars, aborting"19:21
EriC^^guruprasad_: if it only fails at the efibootmgr adding part, we can do a workaround just so it boots the next time around and then undo it19:21
MWMtrying disktool.  thanks you19:21
EriC^^guruprasad_: hmm, did it install the efi files? check ls -l /boot/efi/EFI/ubuntu19:22
requiestit is connectvity between linux cleint and server19:22
lotuspsychjerequiest: they might have experience also in other server issues19:22
lotuspsychjerequiest: or the ##networking guys= connectivity19:22
guruprasad_EriC^^: No ubuntu in /boot/efi/EFI. Only Microsoft and Boot19:22
EriC^^guruprasad_: try modprobe efivars again19:23
requiestok it is related to local system aslo auto loing to user without giving user name and password19:24
guruprasad_EriC^^: No error but not listed in lsmod. Since this is a new install, I don't mind reinstalling it. So can I disable legacy mode and then try to boot from the UEFI installer?19:24
EriC^^guruprasad_: yeah sure19:24
MWM"disktool" doesnt show but there is a "disk" which says :  Disk is OK, one bad sector  <-- this is the SMART data?19:24
guruprasad_EriC^^: But what to do if it drops to grub2 shell like it does now?19:25
EriC^^does it say anything before or just grub> ?19:25
guruprasad_With legacy mode it just drops to the grub2 shell, no errors19:25
guruprasad_EriC^^: ^^19:26
EriC^^guruprasad_: if you get a grub shell you can boot the current install from it19:26
EriC^^guruprasad_: when you boot in uefi mode what happens?19:26
guruprasad_EriC^^: When I tried booting from live usb, it displayed 2 boot devices for the same USB drive - one prefixed with UEFI. Selecting the UEFI version dropped me to grub2 shell.19:26
guruprasad_The other version booted into Ubuntu installer just fine.19:27
abrakamn,j  d;d19:27
EriC^^guruprasad_: ok, boot that entry again, if you get a grub shell19:27
guruprasad_Have to try the same with legacy disabled19:27
EriC^^then boot your current install from it19:27
abrakamfuck your ass19:27
lotuspsychje!ops | abrakam19:28
ubottuabrakam: Help! Channel emergency! (ONLY use this trigger in emergencies) - Pici, Myrtti, jrib, Amaranth, tonyyarusso, Nalioth, lamont, CarlK, elky, mneptok, PriceChild, Tm_T, jpds, ikonia, Flannel, genii, wgrant, stdin, h00k, IdleOne, nhandler, Jordan_U, popey, Corey, ocean, cprofitt, djones, Madpilot, gnomefreak, lhavelund, k1l, rww, phunyguy, bazhang19:28
EriC^^and when it boots, just type sudo apt-get install --reinstall grub-efi-amd64-signed and you should be good19:28
guruprasad_EriC^^: From the legacy mode or UEFI mode?19:28
EriC^^guruprasad_: ^ do you need help booting the install?19:28
lotuspsychjek1l: tnx19:28
guruprasad_EriC^^: I suspect it will boot fine if I turn off legacy. If not, typing the lines usually seen in grub2 when you try to edit it will work?19:29
EriC^^guruprasad_: type ls -l in grub to get a list of the devices and uuid, then as usual set root='(hdx,gptY)' , then linux /boot/vmlinuz... root=UUID=<put the uuid here> , then initrd /boot/init... , then type boot19:30
guruprasad_EriC^^: If there is something I could refer to manually boot the installed OS from grub shell, that will be handy19:30
guruprasad_EriC^^: that's all? That looks like the grub 1 way :)19:30
EriC^^guruprasad_: basically you just need to get the uuid, use ls -l to get it, it's the 50gb ext4 partition, set root='(hdX,gptY)' of that partition19:31
guruprasad_EriC^^: Sure, let me try these things out and get back. Thanks for the help EriC^^ and daftykins :)19:32
EriC^^guruprasad_: yup that's about it, you can type insmod part_gpt and insmod ext2 and insmod linux before, but i think it already has them loaded19:32
EriC^^guruprasad_: ok19:32
moijkWhat would I use if I want to use regexp in a bash script to set a variable to the filtered output?19:32
requiesthow to autologin in ubuntu text mode . disabled xwindows desktop. i did settings exec /sbin/getty 8 38400 tty -a pc19:32
requiestthe result nothing19:33
=== ramon is now known as Guest42787
EriC^^requiest: you want it to boot into text mode?19:35
MonkeyDustrequiest  you mean like a server, with no UI?19:36
MonkeyDustno GUI*19:36
requiesttext mode is ok it login termenal is displaying19:37
EriC^^requiest: which country are you from?19:37
MonkeyDustrequiest  what you can try... use GDM instead of LightDM... you can then login in GUI, enable automatic login... logout, select terminal mode, login    <-- wild idea19:38
=== barbara is now known as Guest22937
andreHello! I'm trying to give a user permission to change things in var/www/data, but nothing seems to work19:40
requiestthat i have in gdm and lightm it is working19:40
=== andre is now known as Guest87401
Guest87401I have tried almost everything but 777, it seems.19:40
MWMwhat dows it mean when I hand at the purple screen and then get sent to the busybox screen19:40
Guest87401the user is in www-data, and www-data has 755 over /var/www (-R)19:40
MWMwith an initramfs prompt19:40
Jordan_Urequiest: You should not be using telnet to log into machines. telnet has zero security.19:40
lotuspsychjeGuest87401: maybe the ##httpd guys can help with that19:40
Guest87401I'll ask there, thanks lotuspsychje19:41
lotuspsychjeMWM: ubuntu version?19:41
MWM14.04.3 @lotuspsycje19:42
lotuspsychjeMWM: how did you create the usb stick?19:42
freakyyhow often do they usualyl release ati drivers?19:43
geekowelcome, can anyone help me please with a dvb driver, I'm going crazy :(19:43
lotuspsychjefreakyy: they just released a new amdgpu for newer cards19:43
MWMI used unetbootin ... is there a better one?19:43
requiest disabled xwindows desktop. i did settings exec /sbin/getty 8 38400 tty -a pc19:43
lotuspsychjeMWM: wicj Os did you create from?19:43
requiestno redult19:43
MWMHMM?  Ubuntu Desktop 64 bit?  or did you mean something else?19:44
lotuspsychjeMWM: yes i mean wich operating system did you create your ubuntu usb?19:44
MWMoh!  Windows 719:44
geekosomeone notice my question please19:45
lotuspsychjeMWM: try the universal usb installer19:45
WinterGuardianHI I have an issue with Ubuntu. It's booting but the graphic interface is crashing. It's only saying I have an internal error on normal startup. I tryed going on safe graphic startup on the recovery menu. It said me it can't detect my graphic settings so I had to choose them. Unfortunately, I had to do that in a gui and it couldn't be loaded correctly. I had a choice to do but there wasn't any text next to the19:45
WinterGuardiancheckboxes. After that I've rebooted and tryed to repair packages. It found things to repair but couldn't download the updates because I wasn't connected. So I've rebooted again and did the network thing in the recovery menu. Couldn't start a new networking process because there was already one and nothing was happening after. No coming back to the recoverymenu or anything, I could type text but no commands. I know how19:45
MWMthe one included in win7?19:45
lotuspsychje!details | geeko19:45
ubottugeeko: Please elaborate; your question or issue may not seem clear or detailed enough for people to help you. Please give more detailed information, errors, steps, and possibly configuration files (use the !pastebin to avoid flooding the channel)19:45
WinterGuardianto go in console mode but I have no idea what are the commands I should type.19:45
EriC^^requiest: you can add "text" to the grub kernel line, that will boot to a login terminal19:45
EriC^^requiest: quiet splash text ...19:45
HexbomberStrange question, not directly Ubuntu related, but I figured somebody here might now. I've got two ubuntu machines ('devserver' and 'vps'). 'devserver' is firewalled and only allows remote connections from 'vps'. I am trying to setup an SSH tunnel that goes from 'my local desktop' -> 'vps' -> 'devserver', so I can access my app that's running on 'devserver' port 3000. Is this possible using PuTTy?19:45
requiestok done19:45
EriC^^requiest: sudo update-grub19:46
lotuspsychjeWinterGuardian: ubuntu version? graphics card chipset?19:46
requiestnow restarted19:46
nat0Hexbomber: http://unix.stackexchange.com/questions/140853/securely-tunnel-port-through-intermediate-host19:47
nat0Dunno about putty though.19:47
Hexbombernat0, thanks!19:47
WinterGuardianlotuspsychje 14.04 Radeon HD Graphics 1.40 GHz19:47
WinterGuardianIt's working perfectly fine on windows19:47
requiestok now login screen has come in text mode19:47
WinterGuardianand Worked fine the day after the installation of ubuntu19:47
lotuspsychjeWinterGuardian: did this all happen after an updateN19:48
MWM@ lotuspsychje http://www.pendrivelinux.com/liveusb-install-live-usb-creator/ this one?19:48
geekolotuspsychje: Thanks, I have an external dvd receiver (TechniSat SkyStar USB 2), I can't watch tv channel using MeTv or Kaffeine, because I got no DVB device, so I try to install the drivers I follow some tuts but I don't know if it's installed or no, and if no I don't know what to do, please help me I'm novice :(19:48
requiesterci ok now login screen has come in text mode19:48
WinterGuardianlotuspsychje it was 2 weeks ago, I've ignored it and used Windows instead I have dual boot. All I did litterally is to update grub to be able to boot on windows because I couldn't at first19:49
lotuspsychje!usb | MWM19:49
ubottuMWM: For information about installing Ubuntu from USB flash drives, see https://help.ubuntu.com/community/Installation/FromUSBStick - For a persistent live USB install, see: https://wiki.ubuntu.com/LiveUsbPendrivePersistent19:49
EriC^^requiest: is that what you want?19:49
geekolotuspsychje: I mean DVB*19:49
requiesterci now here it should not ask for user name and password it should directly login to user19:51
=== ryan_ is now known as SlidingHorn
requiesterci i mean if user name is pc1 $ prompt19:52
WinterGuardiananyone has an idea of what i should do ?19:53
RipmindIs there some very easy to use upnp server for ubuntu?19:54
lotuspsychjeWinterGuardian: can you enter grub to load a previous kernel?19:54
WinterGuardianlotuspsychje I "think" If I do advanced options, I have 4 things, well 2 with their recovery mode19:54
WinterGuardianI tryed both in normal and they are crashing the same way19:54
WinterGuardianIt's like Ubuntu 14.04 on linux 3219:55
lotuspsychjeWinterGuardian: recoverymode/fix broken packages19:55
WinterGuardianor 6719:55
shinji_hiccan anyone help me installing a ppa launchpad with the command "sudo add-apt-repository ppa:someppa/ppa"19:55
WinterGuardianI tryed but I need network do to that19:55
WinterGuardianAs I said in my long story, I can't connect the my wifi network19:55
lotuspsychje!ppa | Shibe19:55
ubottuShibe: A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge19:55
WinterGuardianIt was working before though19:55
OerHeksshinji_hic, url?19:56
lotuspsychjeWinterGuardian: its reccomended to install ubuntu with internet/cable19:56
Ripmindis teh package java-common the default java?19:56
lotuspsychje!java | Ripmind19:56
ubottuRipmind: To just use java you need a "Java Runtime Environment" (JRE) and/or a browser plugin. If that is not sufficient you will need a "Java Development Kit" (JDK) aka "Software  Development Kit" (SDK).  Please see https://help.ubuntu.com/community/Java about how to install one of three current implementations.19:56
OerHeksopen terminal crtl + T :  sudo add-apt-repository ppa:strukturag/libde26519:57
Ripmindi know what i need for o.O19:57
WinterGuardianWell I'll try with a cable thanks19:57
shinji_hicthanx OerHeks19:57
OerHeksshinji_hic, it has *no* packages for wily 15.1019:58
redkriegtober_do I just state a problem I'm having?19:58
ioria!info java-common19:58
ubottujava-common (source: java-common): Base of all Java packages. In component main, is optional. Version 0.52 (wily), package size 127 kB, installed size 292 kB19:58
shinji_hicits ok i have 14.0419:58
OerHeksshinji_hic, oke, have fun!19:58
shinji_hicthank you19:58
livetvWelcome I have a tv card driver problem, can anyone help me please19:59
redkriegtober_using a xubuntu 64bit live usb to boot into my lenovo b575. It tells me that wifi is hardware blocked(using rfkill list) and that it isn't software blocked. none of my hardware keys re enable wifi.20:00
lotuspsychjeredkriegtober_: what brand of pc is that?20:00
freakyylotuspsychje: what did they relelease? a new card model? ... but no new drivers?20:01
=== _dv_ is now known as dv_
lotuspsychjefreakyy: amdgpu driver for linux, for newer card models20:01
freakyylotuspsychje: where can i get that driver?20:01
redkriegtober_lenovo b575 is the model20:01
lotuspsychjefreakyy: dont think its added to repos yet20:02
freakyyis it amd-catalyst-15.9-linux-installer-15.201.1151-x86.x86_64.zip?20:02
freakyylotuspsychje: how do u know that? and where can i check?20:02
lotuspsychjeredkriegtober_: you know if bios has a 'last state' wifi option?20:02
redkriegtober_lotuspsychje: lenovo b575 is the model20:02
redkriegtober_lotuspsychje: I'll boot into bios...20:02
redkriegtober_lotuspsychje: where would this option be in bios?20:03
MonkeyDustredkriegtober_  the bios screen can be different on different computers20:04
redkriegtober_MonkeyDust: under configuration it has an option to enable or disable wireless. it says it's enabled.20:05
guruprasadEriC^^I was able to enable secureboot and install Ubuntu GNOME :D After the install, grub showed up and I am now in the installed Ubuntu GNOME20:05
guruprasadThanks for your help20:05
lotuspsychjefreakyy: http://www.phoronix.com/scan.php?page=news_item&px=AMDGPU-Xorg-1.020:05
lotuspsychjeredkriegtober_: ok, wich chipset is your wifi card20:05
guruprasadI did see some graphics glitches after selecting ubuntu in grub, but that's probably because of using nouveau for my Nvidia GTX 970 card20:06
guruprasadNow I have to check if I can boot into Windows from grub :)20:06
redkriegtober_lotuspsychje: ralink rt309020:06
guruprasadThanks again EriC^^ and daftykins :)20:06
lotuspsychjeredkriegtober_: ralink cards might need proper firmware20:06
EriC^^guruprasad: great, no problem20:07
lotuspsychjeredkriegtober_: did you install ubuntu with internet/cable on?20:07
redkriegtober_lotuspsychje: it isn't installed, I'm using a live usb at the moment. (this is a separate laptop I'm typing on)20:07
freakyylotuspsychje: thanks i dont need that one - its only for newer graphic cards20:08
lotuspsychjeredkriegtober_: i would install ubuntu with cable, enable updates during setup20:08
redkriegtober_lotuspsychje:  unfortunately, I don't have an ethernet cable.20:08
lotuspsychjeredkriegtober_: then update your system to latest 14.04.320:08
lotuspsychjeredkriegtober_: ralink cards need to touch linux-firmware to get proper firmware in sompe cases20:09
OerHekssome of those ralink ( atheros) need hwencryption off > echo "options ath9k nohwcrypt=1" | sudo tee -a /etc/modprobe.d/ath9k.conf20:10
redkriegtober_lotuspsychje: for whatever reason I just get a blank screen when trying to boot into live usbs with 14.04 on them20:10
Ripmindhow can i update java to 1.8? default-jd was 1.720:11
redkriegtober_lotuspsychje: sorry, I forgot to mention I've been using the 15.10 live usb20:11
sam_vimesI have an ubuntu server on a remote location, with no access to it. Can I delete everything on it and re-install ubuntu on it without actual access?20:12
lotuspsychjeredkriegtober_: try LTS for more stable experience20:12
sam_vimesor just kind of, clean everything20:12
redkriegtober_lotuspsychje: the LTS does not boot from the live usb, or go into install process.20:12
OerHekssam_vimes, only if you can do magic20:12
MonkeyDustsam_vimes  you mean, no physical access, only over the network?20:13
lotuspsychjeredkriegtober_: how did you create your usb?20:13
sam_vimesif the OS can run in ram or something whilst the rest is being purged, seems technically possible.20:13
redkriegtober_lotuspsychje: I'm using a surface pro 3 with ubuntu gnome 15.10 to make live usbs using dd20:13
compdocsam_vimes, only if you had remote access to the console, like this:   http://www.howtogeek.com/56538/how-to-remotely-control-your-pc-even-when-it-crashes/20:13
sam_vimesI do have terminal access20:14
lotuspsychjeredkriegtober_: ive install many lenovo's with 14.04.3 already never failed on me20:14
sam_vimesnope, don't have that20:14
compdocKvm over ip20:14
compdocif not, once you wipe the OS, theres no more connection20:15
redkriegtober_lotuspsychje: I've tried to boot several alterations of ubuntu with the 14.04lts (gnome, unity, xubuntu, kubuntu.)  none of them work at all20:15
lotuspsychjeredkriegtober_: that doesnt make sense mate20:15
redkriegtober_lotuspsychje: only the 15.10 is booting up.20:15
MonkeyDustredkriegtober_  then why use ubuntu at all?20:15
sam_vimessure, but is there a way to delete everything but the base OS ?20:15
lotuspsychjeredkriegtober_: what kind of graphics card this lenovo have?20:15
sam_vimeslike how Windows 10 does it20:15
compdocuninstall packages20:16
redkriegtober_MonkeyDust: I've got debian 8 installed on there already(dualbooted with bodhi linux) and it doesn't recognize wifi networks20:16
MonkeyDustredkriegtober_  where does ubuntu come in?20:16
lotuspsychjeredkriegtober_: you need to plugin cable20:17
redkriegtober_MonkeyDust: I've tried to boot several alterations of ubuntu with the 14.04lts (gnome, unity, xubuntu, kubuntu.)  none of them work at all20:17
redkriegtober_lotuspsychje: I don't have any access to a physical connection.20:17
redkriegtober_lotuspsychje: checking graphics card20:18
lotuspsychjeredkriegtober_: all flavors had same error?20:18
redkriegtober_lotuspsychje: so long as they were the 14.04.3 yes/20:18
redkriegtober_lotuspsychje: the 15.10 boots correctly for all, except I get the wifi issue.20:18
RonWhoCaresWhat program can support an HD web cam?20:19
redkriegtober_lotuspsychje: amd e-350 cpu20:19
sam_vimesgnome smile?20:19
sam_vimesRonWhoCares, Cheese (Gnome) https://wiki.gnome.org/Apps/Cheese20:19
RonWhoCaresCheese is only showing 640x48020:20
redkriegtober_lotuspsychje: just tried to boot the 14.04.3 vanilla ubuntu and it made the "classic ubuntu sound" with nothing showing on the screen. so perhaps there is a graphic driver error with 14.04.320:20
redkriegtober_lotuspsychje: but that has been fixed in 15.1020:20
RonWhoCaressam_vimes: This is the web cam I purchased   http://www.ebay.ca/itm/38134651800420:20
thebwtis there a way to make the ubuntu CLI output the release codename? A file or something that I can cat to say 'trusty' for example?20:21
GrayHatSecurityMAC is for Noobs :)20:21
RonWhoCaressam_vimes: I sure how they don't mean 5.0 MP20:21
RonWhoCaresI am wanting to record video20:22
sam_vimeswell, my cheese gives me 1080p, the max of my camera20:22
RonWhoCaresYou think the camera isn't HD?20:22
sam_vimesso cheese goes at least to HD. probably higher. "Edit > Preference" and set the resolution20:22
MWMback at a fresh install with no setwork available20:23
MWMno network that would be20:23
Jordan_Uthebwt: "man lsb_release", specifically to get the codename (as opposed to the official release name) "lsb_release -c".20:23
RonWhoCaressam_vimes: The video resolution highest is 640x48020:23
RonWhoCaressam_vimes: That is what the box says too :/20:24
Ben64RonWhoCares: its quite likely that the ebay ad lied20:24
sam_vimesthen I don't know, mine goes higher then 640x480. Se either the camera is a lie (probably..) or the drivers are weird, try another program.20:24
MWMfresh install of 14.04 64bit desktop that is.20:24
MonkeyDustRonWhoCares  are you in Unity?20:24
lotuspsychjeMWM: sudo lshw -C network20:25
RonWhoCaresMonkeyDust: I don't know what Unity is20:25
sneakret_Can anyone tell me why the logtail package is deprecated, and whether it has been replaced with something better?20:25
MonkeyDustRonWhoCares  with the bar on the left20:25
RonWhoCaresYes I am20:25
RonWhoCaresMonkeyDust: Do you have another suggestion to try?20:26
Ben64sneakret_: it still appears to be in the repositories20:26
MonkeyDustRonWhoCares  right click on the Dash menu (top left), select Applications, look for 'cam'... see what you can use20:26
sneakret_Or better yet, can someone tell me how to find details related to Ubuntu package deprecation? (Reasons, when it was deprecated, what it was replaced with, etc.)20:26
lotuspsychjeredkriegtober_: did you try nomodeset on 14.04.320:26
redkriegtober_ lotuspsychje: what is nomodeset20:27
lotuspsychje!nomodeset | redkriegtober_20:27
ubotturedkriegtober_: A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter20:27
MWM@ lotuspsychje I cant paste because the machine has no connectioneven intenally.  there doesnt appear to be anything odd in there though.  Ive been having this problem already and think it may be that the driver isnt installed.20:27
sneakret_$ apt-cache search logtail20:27
sneakret_logtail - Print log file lines that have not been read (deprecated)20:27
lotuspsychjeMWM: whats the network card chipset20:27
redkriegtober_lotuspsychje: I'll look at this now, thank you.20:27
RonWhoCaresMonkeyDust: There are a few here20:27
sneakret_It's in the repositories, but the package description says it's deprecated.20:28
MWM@lotuspsychje realtek 811120:28
MWMhttp://ubuntuforums.org/showthread.php?t=1022411 <- this works but doesnt survive a reboot20:28
Jordan_Usneakret_: The package's short description says that it's deprecated, and so shouldn't be used even if it is available. The long description includes "This is good for marking log files for automatic log file checkers to monitor system events." suggesting that it wasn't intended as much for end users as for other logging notifiers. Were you using it directly?20:28
MWMhttp://ubuntuforums.org/showthread.php?t=1022411 < this errors at the build step20:29
lotuspsychje!realtek | MWM20:29
ubottuMWM: some help for recent Realtek chipsets can be found at https://help.ubuntu.com/community/WifiDocs/Device/RealtekRTL8187b20:29
RonWhoCaresMonkeyDust: Camera , Camera Monitor , Camorama Webcam Viewer , Gtcam Digital Camera Browser20:29
redkriegtober_lotuspsychje: am I to enter this in terminal with live usb or in grub? I'm a newb20:29
sneakret_Jordan_U: I want to do some very specific log notification, and I was going to use logtail. If it is deprecated, I prefer not to use it... but has it been replaced with something better?20:29
MWMthank you both.  I will look at the link and see what I can do.20:30
lotuspsychjeredkriegtober_: read the boot options in nomodeset, from grub you can edit20:30
MonkeyDustRonWhoCares  yes, click on either and read the description, see what most suits you20:30
MonkeyDustRonWhoCares  if you don't get an answer here, try in #ubuntustudio20:31
sneakret_Maybe I'm not asking the ideal question.20:31
lotuspsychje!info colortail | sneakret_20:31
ubottusneakret_: colortail (source: colortail): log colorizer that makes log checking easier. In component universe, is extra. Version 0.3.3-1 (wily), package size 24 kB, installed size 144 kB20:31
RonWhoCaresMonkeyDust: Thanks20:31
lotuspsychjesneak: colortail -f /var/log/syslog20:31
sneakret_I want to do some specific log monitoring and notification. I don't want a package that comes with a bunch of prebuilt notification rules. Is there a good solution for that?20:31
sneakret_lotuspsychje: That could be handy, but I don't think it does what I want.20:32
Jordan_Usneakret_: For Ubuntu 14.10 and newer you'll probably want to hook into journalctl.20:32
sneakret_I'm on 14.0420:33
thebwtJordan_U: thanks!20:34
Ripmindany good upnp server for ubuntu??20:34
lotuspsychjeRipmind: maybe the #ubuntu-server guys know20:34
lotuspsychjesneakret_: can you detail what specific logs you wanna monitor then?20:35
RipmindOk other question: Does anyone know how i can install java 1.8?20:35
sneakret_For now, I want to monitor auth.log primarily.20:35
lotuspsychje!latest | Ripmind20:35
ubottuRipmind: Packages in Ubuntu may not be the latest. Ubuntu aims for stability, so "latest" may not be a good idea. Post-release updates are only considered if they are fixes for security vulnerabilities, high impact bug fixes, or unintrusive bug fixes with substantial benefit. See also !backports, !sru, and !ppa.20:35
RipmindI still need it, so how can i do it manually?20:36
sneakret_Ripmind: http://askubuntu.com/questions/464755/how-to-install-openjdk-8-on-14-04-lts20:36
Ripmindanswered May 13 '1420:36
RipmindThey "will be available soon",20:36
Ripmindlinux in a nutshell20:37
sneakret_Keep reading.20:37
Ben64Ripmind: not really20:37
sneakret_openjdk-8-jre or openjdk-8-jdk20:37
Ben64been in ubuntu since 14.1020:38
Ripmindi don't have those tho :o20:38
RipmindAaaaah i know the problem20:38
RipmindMight be my bad20:38
k1lRipmind: "lsb_release -d" gives what output?20:38
Ripmindi'm working on a rpi220:38
lotuspsychje!info ninja | sneakret_ can this help?20:38
ubottusneakret_ can this help?: ninja (source: ninja): Privilege escalation detection system for GNU/Linux. In component universe, is optional. Version 0.1.3-2 (wily), package size 19 kB, installed size 160 kB20:38
RipmindIt's 14.04 LTS20:38
Ripmind14.04.3 LTS20:38
Ripmindbut it's arm arch20:38
k1lRipmind: there is java for arm, too20:38
Ripmindbut not java 8?20:39
Ripmindamd64 and i386 :(20:39
Ripmindthat is... reeeeaaally bad hum20:40
sneakret_No Oracle Java 8 for ARM?20:40
k1lRipmind: nope20:40
Ripmindseems likely20:40
Ripmindjdk is as good if not better than JRE right20:40
k1lRipmind: that is official and gets build for arm too20:40
k1lRipmind: see https://launchpad.net/ubuntu/+source/openjdk-8/8u66-b01-520:40
k1lRipmind: ah wait. its not for 14.0420:41
Ripmindsadly yes20:41
Ripmindmight it still work?20:41
Ripmindif i load the deb file?20:41
Ripmindi could give it a try, right?20:41
Ben64bad idea to mix versions20:41
Ripmindthen i'll use official20:42
k1lwhat does need java8 then?20:42
MrFastDieHey guys, if I click a random link in a third program my chrome browser just opens a blank tab, any suggestion? Ubuntu 15.1020:42
k1lRipmind: all 14.04 software should work with openjdk-7-jdk20:42
sneakret_ubottu: I'm wanting to notify on ssh login failure primarily. sshd login success, sudo login success, and sudo login failure would be bonuses.20:42
ubottusneakret_: I am only a bot, please don't think I'm intelligent :)20:42
Ripmindk1l: my loved upnp server i sued for windows is there for linux too but need jaba 1.820:43
sneakret_Uh... then no, it doesn't help.20:43
lotuspsychjesneakret_: fail2ban?20:43
k1lRipmind: just use minidlna20:43
k1l!info minidlna trusty | Ripmind20:44
ubottuRipmind: Package minidlna does not exist in trusty20:44
sneakret_I'm using sshguard rather than fail2ban. I don't remember why I chose it over fail2ban offhand, but I'm wanting to do notification--not ban/lockout.20:44
sneakret_Does fail2ban do notification?20:44
lotuspsychjesneakret_: didnt use myself, but it should mention banned hosts somehow right20:44
k1lneed to enable backports first on 14.04 for minidlna20:44
sneakret_lotuspsychje: Sure. It logs them. :)20:45
sneakret_I'm wanting log notification.20:45
k1li would not use java software as a server task anyway, tbh20:45
sneakret_and I want notification of each failure--not only when the host is banned.20:45
Ben64k1l: especially not on a raspberry pi20:45
lotuspsychjesneakret_: maybe the #openssh guys know more tools specificly20:46
Ripmindbut it's a really good upnp server :/20:46
lotuspsychjesneakret_: snort is also pretty nice to prevent intrusion20:46
utu8oso what are your favorite apps that you use the most?20:46
Ben64Ripmind: how is it better than anything else? it serves files over the network20:46
lotuspsychjeutu8o: better ask what you need mate20:46
Ripmindit collects covers atuomatically, recognizes series, recognized which episode u watched last etc.20:47
sneakret_Yeah, I'm familiar with snort. I'm specifically looking for login failure notification though.20:47
utu8oa pretty woman20:47
Ben64Ripmind: yep, many do that20:47
lotuspsychjeutu8o: you wont find that here20:47
utu8ooh ok20:47
Ripminddoes minidlna do that, Ben64?20:47
Ben64i haven't used that one, you could check their website though20:48
Ripmindoh there's mediatomb20:48
Guest90945is there a way to remove nautilus bookmarks ... which are shoved down my throat .. music picutes .. i dont need that shit .. not even home20:48
Ripmindi remember it was supposed to be good20:48
emitattuoHi, what is the best way copy only files that don't already exist somewhere in a directory tree (e.g. ~/).  the files may not be in the same directory as the source directories.  I thought rsync could do something similar, but would I need to find matching files and then pipe them to rsync?  I'd also like the files copied to a subdirectory into ~/, rather than ~/ itself.20:48
lotuspsychjesneakret_: im reading fail2ban can email notify :p20:48
lotuspsychje!language | Guest9094520:49
ubottuGuest90945: The main Ubuntu channels require that you speak in calm, polite English. For other languages, please visit https://wiki.ubuntu.com/IRC/ChannelList20:49
sneakret_lotuspsychje: On each login failure, or only when it bans?20:50
utu8oi like Linux Mint20:50
jessecDoes network-manager not come as default in 14.04 sever?20:50
kubast2Hey ,I installed tint2[taskbar] ,openbox[window manager] ,menu[program list] and obmenu[openbox menu editor]. How can I modify the program list name ,programs categories etc. this package > http://packages.ubuntu.com/wily/menu ?20:51
rogger_hHello all, im looking for sys admin for my server :) my budget is not big but maybe someone intrested . Pm me20:51
k1lutu8o: no problem with that, its just this channel focuses on ubuntu support. for mint better see their channels20:51
lotuspsychjesneakret_: not sure, youll have to test :p20:51
utu8odoesn't Linux Mint have ubuntu?20:52
emitattuorogger_h, this is a support channel. It'd be better to ask in another channel that allows that.20:52
Bashing-omjessec: Nope, consider that network-manager is a GUI thing, and server by default has not GUI .20:52
rogger_hhmmm ok, i dont see how thats not allowd but ok20:53
MonkeyDustutu8o  type /j ##linuxmint, ask there20:54
lotuspsychjerogger_h: try a cheap server hosting company for what you need20:54
emitattuorogger_h, I'm not an op here, but it doesn't seem like a support issue, rather a job advertisement.20:55
sneakret_lotuspsychje: Rather than switching to fail2ban, I think I'll focus on the log monitoring option.20:56
sneakret_since I already chose something else over fail2ban20:56
lotuspsychjesneakret_: ok good luck mate20:56
sneakret_On #openssh someone suggested logwatch. I looked at that and logcheck briefly, but they seemed to do much more than I need.20:56
KaosuI was wondering if anyone might take a look a Ubuntu security guide I decided to write. Feel free to PM me with feedback. You can find the guide at: https://codezero.me/Ubuntu-Security-Guide/20:56
lotuspsychje!discuss | Kaosu20:57
ubottuKaosu: Want to talk about Ubuntu but don't have a support question. Join #ubuntu-discuss, for other non-support discussion not Ubuntu related you can also join #ubuntu-offtopic. Thank you.20:57
KaosuMy aplogies. I will move to that channel. See ya.20:57
ubuntu819should i type sudo rm -rf /* to clean my temp files?20:59
ubottuDO NOT RUN THAT COMMAND! That particular command is DANGEROUS and shouldn't be uttered here. REST OF YOU: DANGER, WILL ROBINSON, DANGER! Do not use the command or utter it here thank you!21:00
BluesKajubuntu819,  that's a no no here21:01
lotuspsychje!info bleachbit | ubuntu81921:01
ubottuubuntu819: bleachbit (source: bleachbit): delete unnecessary files from the system. In component universe, is optional. Version 1.8-1 (wily), package size 271 kB, installed size 2074 kB21:01
k1lubuntu819: that is a malicious command. dont use that21:02
sneakret_I just assumed ubuntu819 was trolling.21:02
agent_whiteSame... and if so, it's not funny to put in this channel.21:03
Jesterboxboywhen i start my ubuntu installation i get "the system is running in low graphics mode" i cant click the okay button, but i can switch to console21:04
sneakret_I guess he was disappointed with the response.21:04
Jesterboxboyis there a way to reconfigure my x server?21:05
EriC^^Jesterboxboy: maybe you need to install graphics drivers21:06
MAxoucan i use cinamon on ubuntu ??21:06
Jesterboxboyi did install nvidia-common and nvidia-common update21:06
Jesterboxboynvidia-current sry21:06
Jesterboxboybut to no avail21:06
BluesKajJesterboxboy, which gpu ?21:07
MAxoucan i use cinamon on ubuntu ?? I have just install ubuntu-14.04.3-desktop-amd6421:07
BluesKajnvidia-current no longer works21:07
DonkeyHoteii'm getting auth errors downloading from trusty-backports. fix??21:08
Bashing-omJesterboxboy: Purge the old driver prior to a (re-)unstall ? - OR did you use the "Additinal Drivers" utility ?21:08
k1lMAxou: for 14.04 you need a PPA for that21:08
Jesterboxboyi did purge all nvidia-* packages, then installed nvidia-common after update21:08
k1lDonkeyHotei: can you pastebin the output?21:08
DonkeyHoteiWARNING: The following packages cannot be authenticated!21:09
DonkeyHoteik1l: ^21:09
Jesterboxboy@BluesKaj  its a nvidia gpu, wait a minute ill post details21:09
k1lDonkeyHotei: "apt-cache policy packagename" shows what?21:10
DonkeyHotei        500 http://archive.ubuntu.com/ubuntu/ trusty-backports/main amd64 Packages21:11
k1lDonkeyHotei: sudo apt-key update && sudo apt-get update21:11
agent_whiteJesterboxboy: Have you checked the /etc/X11/xorg.conf.d/20-nvidia.conf file?21:11
Jesterboxboy@BluesKaj its nvidia quadro fx 150021:12
agent_whiteJesterboxboy: Also... check to see if you have the command `nvidia-xconfig` for automatic Xorg configuration.21:12
DonkeyHoteik1l: Thanx!!!21:12
MAxouk1l what is PPA -_-21:14
k1lMAxou: 3rd party repo since it is not included into the official ubuntu repo when 14.04 was released21:15
Bashing-omJesterboxboy: Per Nvidia : The 304.xx driver supports the following set of GPUs: >> Quadro FX 1500 .21:15
k1lMAxou: http://www.omgubuntu.co.uk/2014/07/new-cinnamon-ubuntu-14-04-ppa-stable21:15
Jesterboxboyokay i just ran the nvidia-xconfig tool and rebootet21:17
RonWhoCaresMonkeyDust: I am betting the HD isn't compatible with Linux.  Do you think this will be good?  http://www.ebay.ca/itm/27205216979621:17
MAxouk1l ok I need to add the deposit folder url in soft & update to have the package in Ubuntu soft center ?21:18
k1lMAxou: yes.21:18
MAxouok thank for your help21:18
agent_whiteJesterboxboy: Any luck? If not, does `lsmod | grep nvidia` give you anything?21:19
Jesterboxboynot yet21:19
BluesKaj_had to switch machines21:20
Ripmindhow can i mount something automatically on boot? with crontab?21:20
Jesterboxboyi just rebootet, but it takes ages because of some other problems21:20
Jesterboxboymhm now iam stuck at a blinking cursor21:20
agent_white!fstab | Ripmind21:20
ubottuRipmind: The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See https://help.ubuntu.com/community/Fstab and http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions21:20
Ripmindokay thanks21:21
Jesterboxboyi get "a start job is running for dev-disk" when starting, mhm ill tackle that when the graphics issue is solved :D21:21
MAxouk1l : so i should add this : deb http://ppa.launchpad.net/kranich/cinnamon/ubuntu trusty main21:23
Jesterboxboy@agent_white yes lsmod | grep ndivida gives back   nvidia 11407360 2621:23
Jesterboxboyand drm 356352 2 nvidia21:24
k1lMAxou: in the article i linked your there are clear instructions for the terminal21:24
agent_whiteJesterboxboy: Still getting getting your error?21:25
Jesterboxboymhm yes on start iam running into the low graphics mode21:26
Jesterboxboyso i installed nvidia-curren-update, then ran nvidia-xcofnig21:27
=== james is now known as Guest2072
Jesterboxboyis there some way to restart the whole xserver thing without rebooting my machine every time?21:27
jessecBashing-om, thanks it's been a while, didn't want my static setup to disappear.21:28
agent_whiteJesterboxboy: Take a look here: http://askubuntu.com/questions/141606/how-to-fix-the-system-is-running-in-low-graphics-mode-error/141607#14160721:29
=== Don is now known as Guest32672
agent_whiteJesterboxboy: If that doesn't work, scroll to the top up there and look at the top-voted comment; next thing to try might be a re-install of the driver.21:30
MAxouok thank for your help again ;)21:30
MWMError getting hardware address for "eth0": no such device ?21:30
MAxoubecause unity is very not user friendly for a work usage in my opinion21:31
Jesterboxboyhm i already purged and reinstalled the nvidia driver21:33
Jesterboxboythe lightdm tip: i dont have the lightdm.conf, ill try just adding it21:33
TimDixI'm new to Ubuntu, coming from a Windows / Limited Mac background, and I'm finding the Desktop experience a bit sluggish compared to both... suggestions on how to fix / optimize and/or replace with snappier?21:33
Jesterboxboyhow can i check if the right driver is loaded ?21:33
sneakret_I spent so much time fighting nvidia drivers, I finally switched to ATI, only to learn that the driver situation was even worse... so I gave up on Ubuntu as a desktop OS.21:34
k1lTimDix: what ubuntu exactly?21:34
sneakret_That's not very helpful information though. Just sharing, I guess.21:34
k1lTimDix: and what hardware is that (cpu, video card,ram?)21:35
agent_whiteJesterboxboy: That's what `lsmod` is for, to lookup the modules loaded. -- What the the previous driver you were using, nouveau?21:36
TimDix14.04 LTS, Intel® Core™ i7-3770 CPU @ 3.40GHz × 8, GeForce GT 640/PCIe/SSE2, 12GB Ram21:36
Bashing-omjessec: ' dpkg -l | grep nvidia* ' . Can have only one that is status 'ii' .( preferably none other than one _ .21:36
Jesterboxboy@agent_white that i know, but it only shows to lines with nvidia in them, iam not quite sure if they are correctly loaded21:36
sneakret_nvidia* is a strange regex. :)21:36
jessec^ don't think that's for me21:36
k1lTimDix: you installed the nvidia driver in the "propriatary drivers tab"?21:36
TimDixThe default drivers caused frequent crashes.21:37
Jesterboxboyright now i installed it in the command line with sudo apt-get install nvidia-current-updates21:37
TimDixSwitching to nvidia's drivers cleared up the crashes.21:37
agent_whiteJesterboxboy: `lsmod`, then upload that to paste.ubuntu.com so I can take a look.21:37
Jesterboxboydifferent machine21:37
oberststenI have php5-fpm, but suddenly my sites stopped working, had to restart php5-fpm, the log says nothing, anyone knows where could I start?21:38
Paaltomohello :)21:38
fritehi, with an IP the police can always get the person right? not just a latitude and longitude?21:39
Jesterboxboyits a symbol by symbol transcription21:39
agent_whiteJesterboxboy: `sudo ubuntu-drivers devices`  <- Find your model in here21:39
sneakret_Bashing-om: FYI, "grep nvidia*" will match "nvidi", "nvidifoo", "nvidia", "nvidiaaaaaa", ... grep uses regex rather than globbing, and does partial matches by default (so "grep nvidia" would do what you intended)21:39
Bashing-omsneakret_: Yeah .. agreed .. phone was ringing and I got rushed .21:40
k1lfrite: #ubuntu-offtopic for non ubuntu related talk21:40
sneakret_Bashing-om: Sorry to tell you what you already know then. :)21:41
sneakret_Man... as IRC help goes, this is pretty impressive. I'm used to seeing lots of flamewars.21:41
Jesterboxboy @agent_white thanks already knew the model, and i installed nvidia-304-udpates21:42
MrCeeIIIanyone familiar with conky21:42
agent_whiteJesterboxboy: Likely you need the write driver installed... I'm guessing 340.21:42
TimDixk1l: To clarify a bit on what I'm referring to as sluggish... switching between applications, Alt + Tab, resizing windows, etc.21:42
agent_whiteJesterboxboy: 304? Or 340?21:42
Jesterboxboyits recommending the 30421:42
TimDixk1l: Also, the performance definitely appears to deteriorate with time, gets better on reboot.21:42
Bashing-omsneakret_: Nope, no applogy required .. re-infocement is good .. and needful for correct instruction in this channel .:)21:43
MrCeeIIIok that wasnt a good way to address the issue.... how about this i installed an application from the software center howerver, it does not show in the menu search... why would this happen?21:43
=== brennan is now known as Guest28155
agent_whiteJesterboxboy: huh... what do the first 6 letters after "modadlias : pci:...." say?21:43
nightviperHey is there any virus writing software on BlackBox?21:44
k1lTimDix: could be driver specific issues. see the system logs about that. i dont have that feeling on my laptop with intel  card.21:44
k1l!blackbox | nightviper21:44
MrCeeIIIok let me try somthing else... is there a terminal way to see what programs are installed?21:45
k1lnightviper: well, better ask the blackbox support about that. this is ubuntu support21:45
MrCeeIIIok my question is concerning ubuntu and i have yet to get a response21:45
Jesterboxboy @MrCeelll dpkg --get-selections | grep21:46
MrCeeIII---feels skin turning green....21:46
Jesterboxboyafter the grep your search term21:46
k1lMrCeeIII: yes there are.21:46
TimDixk1l: Thank you, I'll review. Also, not sure if it makes a difference, but I'm running a three monitor setup here.21:46
MWMwindows can get this NIC to work just fine.  Ubuntu... nope.21:46
k1lTimDix: oh, that could be an issue if the nvidia driver/card is on the edge of overpowered mode.21:47
MrCeeIIII installed an application from the software center howerver, it does not show in the menu search... why would this happen?21:47
k1lMrCeeIII: what program?21:47
sneakret_MrCeeIII: http://askubuntu.com/questions/17823/how-to-list-all-installed-packages21:47
MWM"the system network services are not compatible with this version" ?  that is new21:47
k1lMrCeeIII: well, conky is not a regular program21:47
Jesterboxboy@agent_white sry i didnt quite understand21:47
k1l!conky | MrCeeIII21:47
Jesterboxboyin the ubunutu drivers ouptut?21:47
agent_whiteJesterboxboy: Sorry, wrong thing! `lspci -nn | grep VGA` -- what are the letters/numbers in the second to last field21:48
k1lMrCeeIII: see https://help.ubuntu.com/community/SettingUpConky21:48
MrCeeIIIwhats !conky mean21:48
agent_whiteJesterboxboy: In a console, type what I wrote21:48
k1lMrCeeIII: that was a command for the bot, but that didnt have info about conky21:48
sneakret_It means "yo, bot... tell the following person about conky"21:48
Jesterboxboy[Quadro DX 1500] or did you mean this21:49
agent_whiteOne after that21:49
OerHeks2000+ forum posts about conky http://ubuntuforums.org/showthread.php?t=281865&page=232221:49
MrCeeIIIk1l: oh ok.. that grep command worked nice.,.. still not in my gui menu though..21:49
Jesterboxboyits [Quadro DX 1500] [10de:029e](rev a1)21:49
MWM! realtek | MWM21:49
ubottuMWM, please see my private message21:49
JesterboxboyG71GL before that21:49
OerHeksuse conkymanager if you *need*  a gui21:50
k1lMrCeeIII: it will never be in your gui menu since its not a gui program to click in21:50
k1lMrCeeIII: that is the sense of conky. you make a config file then you set it to autostart on the desktop. then it does it magic. but you dont get a clicky gui program with switches and stuff.21:51
MrCeeIIIk1l: how would you know that21:51
Guest75489hi guys, I would like bind the arrow keys to a combination of keys. For example, I would like to bind the key "arrow up" with the combination of keys "Alt+Ctrl+k". Which tools should I use. I prefer a tool which works in a terminal.21:51
k1lMrCeeIII: see the help page i posted21:51
MrCeeIIIk1l: working on that now... but it would of been great if on the installation page it mentioned the follow on steps... thanks thus far again...21:53
agent_whiteJesterboxboy: Alrighty! And are both `nvidia-304` and `nvidia-304-updates` installed?21:54
Ripmindis it just me or does this look like a real mess? http://p.styler2go.de/?3321:54
Jesterboxboy@agent_white, i think they are mutally exclusive21:54
k1lMrCeeIII: well, you installed a package. so one can asume you not randomly typed letters to install it so you know a bit about that. if you dont know anything so far there are a lot of help pages to get a overview or detailed informations.21:54
Jesterboxboy@agent_white but i installed nvidia-304-updates now21:55
freakyyis there any note taking app for ubuntu?21:55
MrCeeIIIk1l: my friend said to install it.. which i did but i didnt know to look for all the configuration settings21:57
MrCeeIIIk1l: So in the future look for all support on the app prior to installing the package? is that what your telling me?21:58
k1lMrCeeIII: no. it sounds like you were complaining that you dont know what to do with that package. IMHO its my task to look it up if i dont know what to do.22:00
=== not_phunyguy is now known as phunyguy
agent_whiteJesterboxboy: Give it a whirl to see...22:00
k1lMrCeeIII: like: why didnt your friend tell you :)22:00
agent_whiteJesterboxboy: I still would go through http://askubuntu.com/questions/141606/how-to-fix-the-system-is-running-in-low-graphics-mode-error/141607#14160722:00
Jesterboxboy@agent_white i already went through that before :D22:00
agent_whiteJesterboxboy: `cat /var/log/Xorg.0.log | curl -F 'f:1=<-' ix.io`22:02
agent_whiteJesterboxboy: The response you get will be a link to your Xorg.error log on a "pastie" site. That way we can look at the logs. Otherwise it's hard to debug.22:02
django_anyone know about memory leaks22:07
Bashing-omRipmind: Looks pretty messed up to me too . If these filesystems encounter metadata inconsistencies while mounted, they will record this fact in the filesystem superblock. If e2fsck finds that a filesystem is marked with such an error e2fsck will perform a full check after replaying the journal (if present).22:09
Ripmindshall i e2fsck /dev/sda ? or /sda1?22:09
Bashing-omRipmind: I would hazaed as a "guess" that sda1 is the OS, sda2 is "extended" and sda3 is logical as a swap partition . I do suggest running the file system check on sda1 .22:12
RipmindBashing-om: no, OS is mmcblk022:13
gzcwnkOS is on a sd card?22:13
Bashing-omRipmind: SSD or exteral card ?22:14
=== NGC_6205_1 is now known as NGC_6205
Ripmindit's an RPI222:14
Ripmindsda1 is just an usb device22:14
MonkeyDustRipmind  rasp pi has its own channel22:15
Ripmindbut that is more a linux/ubuntu related issue22:15
Ripmindjust an usb device which seems to be messed up in fdisk22:15
Bashing-omRipmind: Will not say .. as I am venturing into unknown elements .. but sda == the device, while sda1 is the 1st partition on that 1st device .22:16
MonkeyDustRipmind  yes, but, e.g. ARM has its own channel too22:16
Ripmindyes, i also do not have any other partition on this device Bashing-om22:16
deweydbHi, i'm on ubuntu 14.04 and i'm trying to get a more up to date version of gifsicle.  When i got it from aptitude it gave me 1.78, but according to this page latest is 1.8822:17
deweydbhow do i get a newer version?22:17
OerHeksdeweydb, upgrade to wily22:18
deweydbwily = 15.04?22:18
OerHeksno, vivid would give you 1.86-122:19
k1ldeweydb: wily is 15.1022:20
deweydboh wily is 15.10. hmm i was told not to switch to those branches, because it makes it harder to upgrade later when you're not on LTS22:21
emitattuodeweydb, it does?22:22
deweydbi dunno, i was on 12.04 ack in the day, and went to 12.10 and was stuck there forever, could never get my ass to 13.0422:22
deweydband everyone told me i was an idiot for going to 12.1022:22
deweydbmaybe i'm just an idiot in general22:23
k1ldeweydb: upgrades get automated testing for the original ubuntu packages.22:23
k1lso if you dont have hardware issues or use 3rd party stuff then upgrades are known to work. the issue is, that on non-LTS you need to upgrade every 6 months now.22:24
deweydbok. well i am a bit worried about other packages getting upgraded in the process. what are my alternatives, instead of upgreading the os, and all the packages, can i just install from source or something?22:25
deweydbi'm only using this box temporarily as a tool for maybe the next few days. then its going to get deleted.22:25
deweydbjust need to fix that one package ot a more up to date version.22:26
deweydbi know i sound stubborn, but i'm worried that other packages getting upgraded might have breaking changes to the app i'm running.22:26
deweydb(i didn't write the app, but its got millions of dependancies)22:26
deweydbor is there a way to just grab one package from a more up to date OS? or is that a horribly bad idea?22:27
k1ldeweydb: see if there is a PPA for that package shipping another version22:28
deweydbhttps://launchpad.net/ubuntu/+source/gifsicle/1.86-1 ?22:29
k1lthat is for 15.04. its not supported to mix the ubuntu releases22:30
deweydbah ok22:30
k1lwhich version do you need?22:31
k1lwhat is with the version on 14.04?22:31
deweydbi need > 1.8522:31
deweydbi have 1.7822:32
deweydbwould this work: https://packages.debian.org/unstable/graphics/gifsicle ?22:32
k1ldont mix debian packages into your ubuntu22:32
k1li already told you what to do22:33
deweydblook for a ppa?22:33
deweydbi was looking can't find anything22:33
k1ldeweydb: this is a PPA which got 1.86 https://launchpad.net/~i3systems/+archive/ubuntu/ubuntu-packages?field.series_filter=trusty22:33
k1lbut dont complain in here if that PPA breaks your system :)22:34
deweydbok thanks.22:35
utu8oeither PPA or outdated 5 to 10 year old software in the Ubuntu repos lol22:35
anheruHi, i need help with rsyslog - after i cleared out syslog file (/var/log/syslog) it's not saving any logs - it's empty. How to fix it?22:35
k1lutu8o: that is not true22:35
EriC^^anheru: type ls -l /var/log/syslog22:37
anheruEriC^^: "-rw-r--r-- 1 root root 0 Nov 23 18:09 /var/log/syslog"22:39
EriC^^anheru: type sudo chown syslog:adm /var/log/syslog22:39
EriC^^and sudo chmod 640 /var/log/syslog22:40
EugeHey everyone ! Sorry to bother you, I'm quite new on ubuntu. Some hours ago I dit the average normal update asked by ubuntu. Now I've blackscreen when I boot. The output is "failed to use bus name org.freedesktop.displaymanager" does anyone know how to deal with this ? :/22:40
anheruEriC^^: it is work again :) thank you22:40
EriC^^anheru: great, no problem :)22:41
anheruEriC^^: could you help me with one more problem - wifi connection?22:42
dczAssembly commands mov A, A and nop (no­operation) are semantically identical. Which one do you prefer to implement idle time and why ?22:42
EriC^^anheru: what's the problem?22:42
Bashing-omEuge: RE-install the graphic's driver ??22:43
glsmaxxI have a question about Ubuntu-Mate 15.0422:43
k1lglsmaxx: just ask :)22:43
glsmaxxIs there a way to just have the icons on the window sitcher icons on the panel?22:44
Bashing-omdcz: Sounds like a homework question . rephrase to what can be acceptable in this channel .22:44
glsmaxxI can't find the setting and I have always just shown icons before.22:44
anheruEriC^^: it's not working ;p i had problem with random connection lost but i did some changes (turned off ipv6, set AP to wpa2 only, added command line about switch off 'n') which helped for some time, but now problem returned22:44
glsmaxxBUT, I have never used Ubuntu-Mate22:44
anheruEriC^^: i had about 10-20 connection lost in last 3 days, and today it cannot connect at all22:45
dczactually its , past exam's question22:45
EugeI thought about reinstalling the graphics drivers but I've bumblebee and it's quite messed up ^^22:45
EugeIs it the only way I can solve this black screen ?22:46
EriC^^anheru: did you try to reset the router?22:48
anheruEriC^^: i did, this is problem of ubuntu because other devices are connected and have no problem22:48
anheruEriC^^: for example now I have no networks available on wifi list22:49
anheruEriC^^: after few switch-on->switch-off i have networks available again, but it cannot connect to any (asking for password over&over again)22:50
EriC^^anheru: to be honest i dunno much about wifi stuff22:50
anheruEriC^^: that's ok, thank you for help anyway :)22:51
Bashing-omEuge: Show the channel what the hardware is ' lspci -vnn | grep -i VGA ' and what driver is installed ' dpkg -l | grep -i nvidia ' in a pastebin . do not post to channel as the output is long .22:51
EriC^^anheru: np :)22:51
Bashing-om!paste | Euge22:52
ubottuEuge: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.22:52
EugeI'm purging the nvidia drivers and bumblebee as you suggested22:55
EugeShould I reinstall everything and then give the output ?22:56
EugeOr just try if this works22:56
Bashing-omEuge: K .. be nice to know the release that you are using . In later releases the tools to install drivers are much improved .22:56
Bashing-omEuge: In order to give precise guidance, I would want to see the requested outputs .22:57
anheruanyone who can help me with wifi problems?23:00
daftykinsjust ask23:01
abrakamhow are you23:01
abrakami can help your wifi23:02
EugeIm using ubuntu 15.0423:02
abrakami have wifi whith bolocs23:02
abrakameuge dont use your 150423:03
abrakamin your assd23:03
anherui'm using 14.04 lts, wifi Atheros qca9565, i had connection lost problems, now it doesn't connect at all23:03
k1ldont mind the troll23:03
Stoufis there such a script that can run on irc as a bot that announces new folders from a specific directory as they come in?23:04
EugeYou suggest me to get the 14.04 ?23:04
Bashing-omEuge: Not at all .. 15.04 is good . Ignore the troll .23:05
the_countBashing-om: So... I tried out the oldest kernel again and those multifinger features mush have broke; they did not work... Also... Somehow double click broke as well23:05
k1lStouf: i bet there are irc bots that can do that. see if supybot can do that. but better ask the supybot guys abot that23:05
EugeOk x)23:05
EugeWell so ! Everything went great I guess. My computer is fine again23:06
EugeSeems like purging nvidia and bumblebee solved the problem23:06
the_countBashing-om: Do you think that a virtual machine would be able to read these multifinger operations? Or not...23:06
Bashing-omthe_count: I do not know what to advise . Like I have said I have no experience with the touch pad .23:06
the_countBashing-om: There is something funny going on with the software though... Or else it should stay constistent, i would think... Maybe not23:07
Bashing-omEuge: Great .. games ? then often times a proprrietary driver performs better .23:07
=== squeakyneb_ is now known as squeakyneb
anherudaftykins: are you there?23:09
EugeI have to install nvidia prime23:09
daftykinsanheru: why23:09
EugeSwitching from smartphone to computer brb23:09
Bashing-omthe_count: All I know is that the device is functional .. the codes are sent from the device, along the way to the target they are not translated .23:09
anherudaftykins: i was hoping you can help me with wifi23:09
daftykinswhy pick on me specifically?23:09
anherudaftykins: cuz you are best in here now ;d23:10
daftykinsi know nothing about that atheros device; reminds me of killer wireless though23:10
anherudaftykins: cmn, dont be shy :) u r23:10
daftykinswell done, you're now ignored23:10
the_countanheru: Bashing-om vs daftykins vs TJ-, it's a hard on23:10
Eugenow that I got back my GUI23:11
Bashing-omEuge: ' sudo ubuntu-drivers devices ; sudo ubuntu-drivers list ; ubuntu-drivers autoinstall ' . If the system is now clean "autoinstall" will do nicely .23:11
the_countanheru: Plus all the others who have spent a ton of time bettering their system administration skills23:11
EugeI have to install nvidia prime and everything ? I'm sorry if I didn't really answer all your messages about my problem, I had some trouble dealing with this on my smartphone23:12
Eugeok I'll try that :)23:12
emitattuoWhat's the best way copy only files that don't already exist somewhere in a destination directory tree (e.g. ~/).  the destination files may not be in the same directory location as the source directories.  I thought rsync could do something similar, but would I need to find matching files and then pipe them to rsync?  I'd also like the files copied to a subdirectory into ~/, rather than ~/ itself.  If it's easier, it's OK if the source23:12
emitattuodirectory tree is flattened at the destination.  Something like this may work, though when I run it, it complains "/bin/cp: Argument list too long".  Alternatively, would some sort of piped find command do the trick?23:12
Eugedo you want me to past the output in private ?23:13
ubottuPlease ask your questions in the channel so that other people can help you, benefit from your questions and answers, and ensure that you're not getting bad advice.23:13
anheruthe_count, well, I was just kiddin, I have no idea who have how much skills in here, i just need some help and it seems that nobody want to help me ;p23:13
emitattuoEuge, if you're just asking because it's long, pastebin would be better.23:13
the_countanheru: Just ask your question consisely and nicely and someone is bound to help you23:13
Eugenot that long ^23:14
the_countemitattuo: cp?23:14
emitattuothe_count, yes, cp.23:14
the_countemitattuo: Then what's the problem?23:14
emitattuothe_count, I'm just trying to figure out how to compose a command that would do that.23:15
Eugecan I paste it here ?23:15
EriC^^emitattuo: you could get a list of the files at the source and destination and then use comm to get just the different files23:15
emitattuoEriC^^, that sounds simple.23:16
emitattuothen either pipe the output to cp or use it as an input file.23:16
the_countEuge: If it's longer than one to two lines, use the paste site23:16
Bashing-omEuge: No pasteing in channel , Use a pastebin site and pass the URL back here , thanks .23:16
Eugeokay sorry23:16
Eugehere is the link of the drivers devices23:17
emitattuoEuge, even when it's slow here, the bots may kick you for flooding if it's more than a line or two.23:17
EriC^^emitattuo: yeah, you'd use the command basename to get the filename from the path first maybe23:17
Eugeokay :)23:18
the_countBashing-om: What would happen if I upgraded to 16.10 from what i have now... Would that induce more problems?23:19
emitattuoEriC^^, does cp prefer newline or zero as a delimiter?23:19
EriC^^space? i dunno23:19
Bashing-omthe_count: Most touchpad issues have been resolved in later kernels .. Be a good test to fire up 16.04 in "try ubuntu" mode and see what is .23:20
the_countBashing-om: Yeah23:20
=== Swish[\] is now known as Swish
daftykinsthe_count: didn't you test 15.10 similarly?23:22
the_countdaftykins: I did not as of yet23:22
daftykinsthen i think all efforts are moot23:22
MAxouis it normal chrome in ubuntu use lot of ram ?23:23
zerowaitstateMAxou: yes23:24
EriC^^MAxou: depends on the number of tabs you open23:24
k1lMAxou: webbrowsers use a lot of ram23:24
zerowaitstateMAxou: Chrome in general uses a lot of ram23:24
MAxou6 tabs23:24
MAxouchorme use 1Go23:24
MAxouOk I should maybe upgrade the ram on my computer so .. have onli 2 go :/23:25
daftykinsyou must be using something pretty fat in those 6 tabs to use 1GB23:25
zerowaitstateMAxou: in Chrome, type Shift-ESC23:26
daftykinsno, just clear your cache and reset your browser profile perhaps23:26
zerowaitstateMAxou: that will show you which processes in Chrome are hogging23:26
emitattuoEriC^^, I have a list of files from find *, then used cat to stuff it into a file, but can't get basename to read the file or find's piped output.  Info find shows that it supports multiple file names as input, so it shouldn't have to be executed with each line, should it?23:28
MAxouopen a 7th tab my maouse can't move on this computer -_-23:28
emitattuoEriC^^, I was trying: find * | cat > file.txt;basename -az file.txt23:28
zerowaitstateMAxou: did you follow my recommendation?23:28
MAxouzerowaitstate i did yes I see each tab take about 100 mo23:29
MAxou+ chrome 15023:29
the_countBashing-om: When 16.04 LTS is released, could I upgrade from 15.10 if I install it to get back on the LTS release scedule?23:30
daftykinsclear cache, close and reopen23:30
zerowaitstateMAxou: a lot of JS, or a lot of image/video will do that23:30
MAxouthis website kill my ubuntu lol http://www.allocine.fr/series/ficheserie_gen_cserie=12275.html23:30
EriC^^emitattuo: do you want to keep the directory structure, or is it fine if you just get the list of files not in the source and copy them into 1 dir?23:31
emitattuoEriC^^, I can lose the directory structure and copy it all flat, yes.23:31
emitattuoEriC^^, in the case of duplicates, I'd rather they be renamed as backups.23:31
Bashing-omthe_count: Sure .. not a problem at all .. But why beat on a maybe ? Burn a .iso and see if the touchpad works in the test environment first .23:32
EriC^^emitattuo: find -type f /path/to/source | while read i; do basename "$i"; done > ~/sourcefiles23:32
EriC^^do the same for the destination so you have sourcefiles and destfiles23:32
the_countBashing-om: Well, I was just thinking ahead... I need to stop asking Hypothetical questions...23:33
emitattuoEriC^^, e.g. /source/foo/file.sh and /source/bar/file.sh would copy as file.sh file2.sh. or something similar.23:33
EriC^^ok np23:33
Bashing-omthe_count: Only stupid question here is what is not asked . ;)23:35
EriC^^emitattuo: after you have both files, type comm -23 <(sort sourcefiles) <(sort destfiles) > filestocopy23:36
MAxousame page open on mozilla i use onli 400 mo ram23:36
emitattuoEriC^^, Thanks!  I'll give it a shot.23:37
EriC^^emitattuo: those are the files in sourcefiles but not in destfiles, so since we don't know the path just the filenames23:37
EriC^^ah so ugly23:37
EriC^^use find to get them and copy to the dir23:38
EriC^^comm -12 will give you the files are common between both source and dest23:38
Eugeokay reboot done23:39
emitattuoEriC^^, find: Paths must precede expression /sourcedirectory/23:41
EriC^^emitattuo: know that it won't copy if you have more than 1 file that have the same name, you'll be missing out, anyways good luck23:41
EriC^^find /sourcedirectory | while read i; do basename "$i"; done > sourcefiles23:42
emitattuoThanks, EriC^^ I'll keep working on it.23:42
EriC^^emitattuo: my bad, find /sourcedirectory -type f ....23:45
=== Zzyzx is now known as THX1138
anheruI'm looking for help with WiFi problems (14.04 lts, atheros qca9565) script restult: pastebin.ubuntu.com/13482342/  syslogs: pastebin.ubuntu.com/13483294/23:55

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!