[00:00] <Bashing-om> !info adb
[00:00] <genii> winb: adb version should be way past that now
[00:00] <genii> !info android-tools-adb
[00:00] <k1l> winb: can you give more details?
[00:01] <k1l> !info android-tools-adb trusty
[00:02] <winb> k1l: Installing android-tools-adb give version 1.0.31 I am on 14.04
[00:02] <masdf> hi guys, can someone recommend me an alternative to simplescan. Everytime I run simplescan my cpu get high as 50%. I've got an i7 processor, and I think it shouldn't be high as that
[00:02] <genii> k1l: So he'd have to be on 10.04 or something
[00:03] <xangua> winb: is there a particular reason you need to update it?
[00:03] <bleb> I'm building a PC and want to be sure my processor is supported on ubuntu. How would I go about doing that? Process or is this one fyi: http://www.newegg.com/Product/Product.aspx?Item=N82E16819113378&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-PCPartPicker,%20LLC-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3938566&SID=
[00:04] <winb> xangua: Yes. Trying to install cyanogenmod on my z3c but twrp tells me I have to update my adb to a newer version
[00:04] <winb> xangua: Using sideload
[00:04] <genii> winb: As you can see by the ubottu response, even 14.04 has a later version than that in the universe repository. Are you usung some android PPA or something?
[00:05] <k1l> adb version gives me 1.0.31 on 14.04 and 15.10
[00:05] <winb> genii No. I am sure you get the same if you install android-tools-adb and use adb version
[00:07] <k1l> worked for me with twrp 2.8.7.1
[00:07] <k1l> @shamu
[00:07] <nicomachus> bleb: looks good, should work fine.
[00:08] <nicomachus> bleb: looks like that this is the standard OEM in the Dell Vostro 3905, which comes with Ubuntu pre-installed. Good enough for Dell.
[00:08] <bleb> nicomachus: I am curious how can you tell?
[00:08] <bleb> oh i see
[00:08] <bleb> cool thanks!
[00:08] <nicomachus> bleb: also, almost any processor will work fine. :)
[00:09] <k1l> winb: http://askubuntu.com/a/629243/31260
[00:09] <nicomachus> bleb: the real issues don't start to come up until you get to wi-fi drivers, and occasionally graphics cards.
[00:10] <k1l> winb: wait. did you actually try the sideload? or just checked the version?
[00:10] <myztic> transfer rates with ssh seem extremely slow, will have to test later with some bigger files
[00:11] <myztic> maybe multiple small files causes it (though 30mb/s is really slow)
[00:11] <nicomachus> myztic: that all depends on networking equipment, usually, but you can also use the -C flag to compress.
[00:11] <genii> winb: See the "3. Update to ADB 1.0.32"  section of http://bernaerts.dyndns.org/linux/74-ubuntu/328-ubuntu-trusty-android-adb-fastboot-qtadb#h2-install-android-tools
[00:11] <myztic> nicomachus: it's over the local network, both physically connected to the router, so that is not an issue
[00:12] <genii> k1l: Apparently 1.0.32 and up is needed with Lollipop onwards
[00:12] <nicomachus> myztic: that could be an issue if you only have 10/100 NICs or if you are using an older CAT cable.
[00:13] <myztic> nicomachus: if it will be that slow with bigger files I will look out for that, ty :)
[00:13] <dorfhyn> 0/
[00:13] <winb> genii and k1l Android Debug Bridge version 1.0.32
[00:13] <winb> finally
[00:13] <winb> thx
[00:13] <noon> Hi
[00:20]  * vinicius 
[00:34] <warjinx> hello everyone
[00:34] <simon_sss> i can't comunicate collectd with carbono-relay-ng
[00:34] <simon_sss> i need help please
[00:39] <adrigm> Hello, can anyone help with a permissions problem?
[00:39] <adrigm> http://pastebin.com/MzHeDXM7
[00:40] <adrigm> Why adrigm user can not write to the directory?
[00:40] <k1l> adrigm: relogin
[00:42] <adrigm> k1l, Thank you! I had not thought of that. Why is this necessary?
[00:43] <k1l> adrigm: usermod cant do that. newgrp can do that.
[00:43] <adrigm> k1l, thanks!
[00:48] <Ilithios> Howdy. I'd like to get Ubuntu installed but having tons of trouble. anyone around who can help?
[00:51] <somsip> Ilithios: give details of the specific problem and someone will help if they can
[00:51] <Bashing-om> Ilithios: Hardware, firware base, the process you are employing ?
[00:52] <Ilithios> ok. I have a laptop. Can't boot from a CD or USB and the file system is read only. however, I CAN mount a USB drive which i can put files on from my other computer here. I just want to wipe out the hard drive and install Ubunutu. Somehow.
[00:55] <Ilithios> oh, right now it duel boots Windows XP and Ubuntu, but Win XP is useless because it won't let me in due to not having a registration key, and Ubuntu says it can't find the / directory and then starts with a readonly file system
[00:57] <dust> http://arstechnica.com/information-technology/2015/12/rsync-net-zfs-replication-to-the-cloud-is-finally-here-and-its-fast/
[00:57] <dust> interseting read for admins
[00:57] <Ilithios> However, if necessary, I could reinstall Windows XP because after that it will start once without the registration key. that's how I used wubi to get Ubuntu on it
[00:58] <MiningMarsh> Ilithios: which bootloader do you use? Grub2?
[00:58] <Ilithios> yes
[00:58] <MiningMarsh> Ilithios: GRUB2 can directly boot an ubuntu ISO if you can stick one on the boot partition
[00:59] <Ilithios> How can I get it the iso there though?
[00:59] <MiningMarsh> I use that method as a failsafe in case I mess up my install
[00:59] <Tarminquay> Hi guys!
[00:59] <Tarminquay> Here's my wireless card:
[00:59] <Tarminquay> Intel Wi-Fi 3160 (M.2)
[01:00] <Bassem> what application to run games?
[01:00] <Tarminquay> Where do I go to verify that it is supported?
[01:00] <MiningMarsh> Tarminquay: it is, I have the same card
[01:00] <MiningMarsh> The intel AC card?
[01:00] <Tarminquay> Yes.
[01:00] <Bashing-om> !wubi | Ilithios
[01:00] <Tarminquay> Excellent news!
[01:00] <MiningMarsh> That is what I have, worked out of the box on ubuntu
[01:01] <Tarminquay> By the way, across the 15.10 flavors, is the hardware support the same?
[01:01] <MiningMarsh> Tarminquay: most likely
[01:01] <Dylan____> Hey everyone
[01:02] <k1l> Tarminquay: they share the same codebase. yes
[01:04] <Ilithios> All other options I have ever seen require booting from a cd or a usb. anyone know offhand a way that does not require this?
[01:04] <MiningMarsh> Ilithios: Like I said, you can manually mount the boot partition and then stick an ubuntu iso from your usb on there
[01:05] <MiningMarsh> and use grub to directly boot it
[01:05] <kknight> hey i  want to invoke ma script on startup menu how to do that
[01:05] <MiningMarsh> Ilithios: https://help.ubuntu.com/community/Grub2/ISOBoot/Examples
[01:05] <MiningMarsh> its not too complicated
[01:06] <MiningMarsh> But it does require maybe 800mb of space
[01:06] <artois> kknight: startup... menu?
[01:07] <kknight> i have made a script and run it by putting some filder it runs we;; but after givinng path in startup menu it doesn't happen
[01:09] <artois> that's very hard to parse, kknight
[01:11] <Ilithios> fdisk -l shows two devices. /dev/sda1 and /dev/sdb1.  /dev/sdb1 is the usb drive, so is /dev/sda1 the hard drive? Isn't it usually hda, not sda?
[01:11] <Dylan____> Guys i pressed one of the f1 keys
[01:11] <MiningMarsh> its usually sda
[01:12] <Dylan____> And now im in the console no desktop enviroment
[01:12] <Ilithios> oh ok
[01:12] <MiningMarsh> I am confused that you have have only an sda1 and not an sda2
[01:12] <MiningMarsh> if you have both windows and ubuntu installed
[01:12] <artois> Ilithios: hda's the old old nomenclature
[01:12] <artois> Ilithios: sudo lsblk -f might be more informative
[01:12] <kknight> i  launch  statup menu by alt+f2 gnome-session-properties
[01:12] <kknight> artois?
[01:12] <kknight> how to do that
[01:12] <MiningMarsh> Ilithios: s for sata iirc, changes when we migrated away from IDE
[01:13] <artois> kknight: does your script run properly if you run it form a terminal?
[01:13] <artois> well, it dates back to p/ata, yeah
[01:13] <artois> but doesn't actually mean you're using sata, IIRC
[01:13] <Dylan____> How u restart in terminal
[01:13] <artois> Dylan____: the mean way is 'reboot'
[01:13] <Dylan____> Yes
[01:14] <Dylan____> How
[01:14] <kknight> artois yes
[01:15] <Bashing-om> Dylan____: key combo alt+F7 . do you return to the GUI ?
[01:15] <kknight> actually m making a welcome script on startup
[01:15] <artois> Dylan____: 'sudo reboot'
[01:15] <artois> for inside your DE, or outside of X (console)?
[01:17] <kknight> artois?
[01:17] <Ilithios> I guess sad1 1 is already mounted. Anyone know why it's readonly?
[01:17] <Ilithios> sda1*
[01:18] <artois> Ilithios: is that your / (root)?
[01:18] <Ilithios> I think so. I used that wubi, and I don't really understand what that does.
[01:19] <Ilithios> so Windows is also on that same partition
[01:20] <Ilithios> somehow
[01:21] <artois> Ilithios: mmmm, what does 'mount' say is "on /"
[01:22] <Dylan____> Guys i get the error some index files failed to download they have been ignored or old ones used instead how do i fix this
[01:22] <Ilithios>  it says /dev/loop2 on /
[01:23] <Ilithios> and /dev/sda1 on /host
[01:23] <somsip> Dylan____: on apt-get update? Use a different repo/mirror
[01:24] <Dylan____> What?
[01:24] <somsip> Dylan____: where do you see this error message>?
[01:24] <Dylan____> Idk what your talking sbout
[01:24] <Dylan____> Terminal when i do sudo apt-get update
[01:25] <somsip> Dylan____: what version of ubuntu?
[01:25] <Dylan____> 14.04
[01:25] <Dylan____> .3
[01:25] <artois> Ilithios: okay
[01:25] <artois> Ilithios: that sounds probably right for wubi
[01:25] <artois> Ilithios: it's pretending a section of the first device is /
[01:25] <somsip> Dylan____: so apt-get id trying to connect to a server to download a list of updated packages. It can't connect to that server for some reason. You either waut for the server to be available again, or use a different server
[01:25] <artois> Ilithios: it's read only so newbies don't accidentally nuke their precious Windows install
[01:26] <Ilithios> I can't even mkdir in my own home directory though. that can't be right.
[01:26] <Dylan____> Hmm ok
[01:26] <Dylan____> Also i have a problem
[01:27] <Dylan____> My macbook pro is getting to the point where the fans are hot the heat i can feel under my leg as soon as it boots up
[01:27] <artois> Ilithios: you can't mkdir ~/foo ? What's the error?
[01:27] <artois> Dylan____: sounds like a laptop to me
[01:27] <tgm4883> This is one of the reason wubi is terrible
[01:27] <somsip> !mac | Dylan____
[01:28] <artois> tgm4883: you've encountered this with wubi before?
[01:28] <Ilithios> artois: mkdir: cannot create directory 'test': Read-only file system
[01:28] <fire_agate> Dylan____: My MBP 2009 15 inch unibody always got really hot
[01:28] <tgm4883> artois: this particular thing, no. But I've been in here long enough to attempt to steer people away from using Wubi
[01:28] <Dylan____> Same my macs a 2010
[01:28] <somsip> artois: AIUI, if the filesystem is damaged in any way (by itself, by windows) the whole thig is trashed
[01:28] <Dylan____> But like its hot im not sure if its usual
[01:29] <nicomachus> Dylan____: macs get hot yo
[01:29] <fire_agate> Yeah i used to be fine with pants on, but sometimes in boxers or gym shorts it got too hot
[01:29] <fire_agate> it probably would have been a medical concern if i used it naked..
[01:29] <Dylan____> So its normal for it to do that
[01:30] <Dylan____> Cause im reading about my mac on the mactel fourms says like this stuff about ubuntu and what releases such as 11.10 etc that are way outdated
[01:30] <Dylan____> Failed tod ownload repository infomation
[01:31] <fire_agate> i never had installed linux on my mac, it was always hot with lion and leopard
[01:31] <Dylan____> Failed to fetch mactel supprt, :/
[01:31] <artois> Ilithios: realpath ~/
[01:32] <artois> tgm4883: isn't it discontinued anyway?
[01:32] <Dylan____> My temps show core 1 is at 54degrees core two is at 55 my temp1 is 66degrees is that bad?
[01:32] <artois> somsip: data on a filesystem is reliant on that FS, yes
[01:32] <Ilithios> artois: realpath is currently not installed.
[01:32] <tgm4883> artois: I thought so yea
[01:32] <somsip> Dylan____: didn't you do this yesterday too?
[01:32] <artois> Ilithios: and if you reboot?
[01:32] <artois> tgm4883: thought so, too; can't be arsed to keep track though
[01:32] <nicomachus> Dylan____: that's pretty normal.
[01:32] <Dylan____> Ok
[01:33] <Dylan____> Cause like idk if its usual for macbooks to get hot
[01:33] <nicomachus> Dylan____: high is 80C, crit is usually about 85.
[01:33] <Dylan____> Ok
[01:33] <snoozelose> I finally resolved that issue from earlier - it took uninstalling VMware completely (v10) and installing the newest version (v12). For safe measure I reinstalled Ubuntu - who knows what it probably messed up under the hood. Now all is good! Thanks for the help!
[01:33] <Dylan____> Cause im using like psensor and cpufreq or something
[01:33] <Dylan____> Might install tl
[01:33] <Dylan____> Tl
[01:34] <fire_agate> The 5 best rappers of all time: dylan, dylan, dylan.. I spit hot fire!
[01:34] <snoozelose> lmao
[01:35] <artois> heh, been a while
[01:36] <anabain> if two boxes are sharing via nfs, is it somehow possible for the client to access e.g. an usb that has been plugged into the server under /media/user ?
[01:36] <Ilithios> artois: same thing. Ubuntu says "Serious errors were found while checking the disk for /." then if I say to ignore that, it says "the disk drive for /tmp is not ready yet of not present."
[01:36] <django_> best pythong ide?
[01:36] <django_> python*
[01:36] <somsip> django_: ask in #python
[01:36] <nicomachus> django_: that's a personal preference thing. ask #python
[01:36] <Ilithios> artois: then if I skip that, it says "An error has occured while mounting /." then if I skip that, it loads into a console
[01:38] <tgm4883> Ilithios: seriously? Ubuntu tells you there are "Serious errors found while checking /" and you are wondering why it's mounted read only?
[01:40] <Ilithios> tgm4883: What I am trying to do is figure out a way to install Ubuntu.
[01:40] <artois> Ilithios: you might want to boot into Windows and fsck your NTFS
[01:40] <artois> or if you're serious about it, reinstall Ubuntu not using wubi
[01:40] <tgm4883> Ilithios, don't use wubi for starters
[01:40] <artois> if you only have one disk, though, that can be involved
[01:40] <artois> not hard, just time consuming
[01:40] <artois> saves time to buy another disk, you'll need it eventually anyway
[01:40] <Ilithios> artois: the only way I can boot into Windpws is if I reformat the hard dribe and reinstall it. Shall I do that?
[01:41] <artois> Ilithios: Windows doesn't boot?
[01:41] <tgm4883> Ilithios: err, what?
[01:42] <Ilithios> artois: well, it boots into the login screen, but it won't let me in because it wants a registration key, so i can't use it. It will run once if it is freshly installed, but I can't reboot or it will not let me in any more
[01:43] <artois> Ilithios: don't have a key?
[01:43] <tgm4883> Ilithios: oh, then why not wipe the drive and install Ubuntu properly
[01:43] <artois> you can't really maintain an NTFS filesystem without Windows
[01:43] <artois> and yeah, if you can't use Windows, no reason to have it
[01:43] <artois> backup your data and fix this
[01:43] <Ilithios> artois: no. I don't even want windows. I just installed it to have something from which to try to get Ubuntu on here.
[01:44] <Ilithios> tgm4883: I would love to do that more than anything in the world. I don't have a way to make a boot dvd, and this laptop won't boot from a usb.
[01:44] <slidinghorn> Ilithios: You don't need an OS installed to install ubuntu.  Just create a bootable USB (unetbootin or rufus) and boot to it & install :)
[01:45] <artois> Ilithios: what OS are you IRCing from?
[01:45] <Ilithios> I am on a different computer
[01:45] <Ilithios> artois: I am in Windows 7 now though
[01:46] <nicomachus> Ilithios: FYI, PLoP is handy: https://www.plop.at/en/bootmanager/download.html
[01:46] <tgm4883> Ilithios: how old is this laptop
[01:46] <nicomachus> Ilithios: allows you to boot from a USB even if the BIOS won't allow it.
[01:47] <artois> Ilithios: yeah just use unetbootin to make image to a usb
[01:47] <nicomachus> Ilithios: the only problem is that you need to burn PLoP to a disk...
[01:48] <Ilithios> artois: The laptop is very old. Not sure exactly how old but very old. At least 10 years old. I made a boot USB with UUI but won't boot it
[01:48] <artois> Ilithios: then burn a CD
[01:48] <myztic> what is a good cli paste tool? was surprised to not find pastebinit wgetpaste nor dpaste ?!
[01:49] <myztic> oh pastebinit is there :)
[01:50] <Ilithios> artois: I guess the message I'm getting is that there is no way to install Ubuntu without having to boot from something that is not the hard drive.
[01:50] <partedUser> hello everybody
[01:50] <artois> myztic: there's always http://sprunge.us/ http://ix.io/ too
[01:50] <artois> partedUser: heya
[01:50] <artois> Ilithios: no, there are other ways
[01:51] <partedUser> i have a question about partitioning
[01:51] <artois> Ilithios: but for someone who doesn't know about them, they are going to be less straightforward
[01:51] <artois> partedUser: prove it
[01:51] <partedUser> can some help me?
[01:51] <myztic> artois: awesome ty I like having more then one paste tool available :)
[01:51] <artois> partedUser: yes, some can
[01:51] <artois> myztic: heh
[01:51] <partedUser> i have trouble understanding the right order of sda
[01:51] <artois> partedUser: ?
[01:51] <zykotick9> myztic: you might want to check out http://termbin.com/ very handy IMO
[01:52] <partedUser> in my pc now is: sda2, sda6, sda5, ... is it the right order?
[01:52] <artois> partedUser: right for what?
[01:52] <myztic> zykotick9: looks good thanks :))
[01:52] <artois> Ilithios: you don't have a CD burner?
[01:52] <partedUser> if it wrong, then hos is it sghould be... best regard.. :D
[01:52] <Ilithios> artois: I don't
[01:52] <anabain> Ilithios, take a look at that: https://help.ubuntu.com/community/Installation/WindowsServerNetboot
[01:52] <anabain> just in case
[01:52] <partedUser> @artois: right order..
[01:53] <artois> Ilithios: can't get one?
[01:53] <artois> partedUser: all things being equal, it isn't right or wrong
[01:53] <artois> partedUser: are you experiencing some problem?
[01:53] <partedUser> artois: by the as i know its normally in decimal number we know it is 1 2 3 4 5...
[01:53] <k1l> partedUser: the ordering will be made automatic.
[01:54] <Ilithios> artois: I can try to find access to one. I just some operating system of some kind within the next 7 hours. *sigh* ok, I guess I better get on trying to find a cd burner
[01:54] <partedUser> but in my haddisk, its, sda2, sd6, and then sda5,... is it okay?
[01:54] <k1l> partedUser: please put a "sudo parted -l" into a pastebin service and link it here
[01:54] <artois> partedUser: it's okay unless it is causing a problem
[01:54] <artois> Ilithios: you don't have burner either?
[01:55] <partedUser> artois: im afraid it will influence my windows instalation...
[01:55] <zykotick9> partedUser: note, you can't trust sdaX to stay the same :(  UUIDs or labels are a lot better to use...
[01:55] <artois> partedUser: if your windows installation boots and doesn't seem influenced, then it probably won't
 partedUser: please put a "sudo parted -l" into a pastebin service and link it here
[01:55] <artois> zykotick9: TMI
[01:55] <k1l> partedUser: we need to see some facts. else we only can make guesses
[01:55] <artois> I don't think we even need facts
[01:55] <artois> wait for a problem to manifest before you try to fix it
[01:56] <artois> no problem = no problem
[01:56] <Ilithios> artois: Right. i don't. Somewhere in the apartment there must be a cd for Ubuntu 10, but I don't know where. I think finding a cd burner would be easier
[01:57] <partedUser> before i manage to use parted magic to reorganize my partition, my windows has the LAN driver broken.. and i've decide to reinstall the windows
[01:57] <sparqz> why'd you reinstall winblows?
[01:57] <slidinghorn> Ilithios: 10.x are end of life and not supported.  You'll likely want to install some flavor of 14.04.  If the machine is that old, maybe the lubuntu or Ubuntu Mate mixes would be good
[01:58] <slidinghorn> !eol | Ilithios More information on end of life:
[01:58] <sparqz> xubuntu wouldn't be bad probably
[01:59] <Ilithios> artois, slidinghorn: thanks for the help. I'm off to try to find a cd burner.
[02:00] <artois> Ilithios: probably be easier than removing the laptop hard drive, connecting it to your other computer, and manually installing a boot image
[02:00] <partedUser> kll: ok, i will try...
[02:01] <slidinghorn> !m$ > sparqz
[02:02] <xangua> why do you want an old unsupported ubuntu release¿ Ilithios
[02:02] <django_> how can i instal something if its a .dev
[02:02] <django_> deb
[02:02] <artois> django_: with dpkg
[02:02] <k1l> Ilithios: still on the ubuntu 10.04 which is shut down already?
[02:02] <slidinghorn> !deb | django_ (you can alsu use dpkg, as artois said)
[02:03] <k1l> django_: just doubleclick on it
[02:05] <k1l> django_: but be aware when installing .deb manually you are making the package system not update the package anymore in most cases
[02:05] <django_> ah
[02:08] <artois> k1l: making what?
[02:10] <k1l> artois: in most cases its either a package that is not in the repo or its a package with a hight version number than the officially repo version. so both dont get updates
[02:10] <fire_agate> could anyone please explain to me why when I leave the computer idle for some time, the mouse turns to an [X], and any open windows maximize?
[02:11] <k1l> fire_agate: which desktop? which ubuntu?
[02:11] <fire_agate> k1l: LXLE
[02:11] <k1l> fire_agate: that sounds like the windowmanager is crashing. but better ask the lxle guys what they changed so it crashed since its not officially ubuntu.
[02:12] <fire_agate> right on, i'll look for a lxle channel
[02:15] <artois> hight version number?
[02:15] <k1l> *higher
[02:15] <artois> oh =)
[02:15] <artois> course
[02:16] <artois> it could still get updates eventually
[02:16] <artois> being more up to date would naturally avoid updates for a while, of course
[02:16] <k1l> artois: no.
[02:17] <k1l> ubuntu backports security patches. so if you install version 2.0 over the ubuntu 1.9 you will never get the security fix which will be named 1.9-ubuntu1
[02:18] <mr_george> h
[02:18] <artois> well, those are specific updates
[02:19] <artois> h
[02:21] <Bassem> what application to run games?
[02:22] <artois> Bassem: menu?
[02:22] <Bassem> artois, what do you mean?
[02:22] <slidinghorn> Bassem: which game(s)?  If it's a Windows game, you can try it on WINE.  Check the appdb for notes about compatibility & fixes
[02:22] <k1l> Bassem: that question doesnt make sense. please give more details
[02:22] <slidinghorn> !appdb | Bassem
[02:22] <artois> TMI
[02:23] <Bassem> wine dos not work
[02:23] <rahuldev> Think 3 times before using Shift +Delete
[02:23] <k1l> Bassem: is it a windows game?
[02:23] <k1l> rahuldev: yep, we all had to learn it that way.
[02:23] <Bassem> yes like fallout 4
[02:24] <Bassem> or farcry 3
[02:24] <rahuldev> k1l, :) I lost 50 gb very important data last week!
[02:24] <xangua> Bassem: did you check wine app database rating¿
[02:24] <k1l> Bassem: look into the wine app database how to run that game. if its not supported yet talk to the game makers to make linux versions
[02:25] <Bassem> wow
[02:26] <Bassem> so i still need windows in alot of stuff
[02:27] <artois> fallout runs fine via Wine
[02:27] <artois> if I had to guess, farcry probably does, too
[02:27] <artois> most things do
[02:27] <artois> particularly applications that aren't horribly authored
[02:27] <k1l> Bassem: you want to run software just made for windows. who do you want to blame? look into the app database to see what wine can run
[02:28] <slidinghorn> artois: the only rating I saw was a "Garbage" rating
[02:28] <xangua> Bassem: are you the Costin Tapalin that made this same question twice in Askubuntu?
[02:28] <Bassem> xangua, no
[02:29] <artois> slidinghorn: for what?
[02:29] <slidinghorn> artois: Fallout 4
[02:30] <artois> good ole directx
[02:30] <artois> guess they got slack in their coding
[02:34] <Bassem> what would be memory scanner in ubuntu
[02:35] <k1l> "memory scanner"? you mean to check the ram if it got hardware failures?
[02:35] <OerHeks> memtest86
[02:37]  * OerHeks got the feeling we are doing homework or co-write a book
[02:57] <JavierA> Hello everyone, I have a laptop for which the display just died, I don't have a monitor to plug. But it is alive as I can type my password and if I type the reboot command it really reboots
[02:57] <Bassem> uget dos not download files from firefox
[02:57] <JavierA> so I am launching the terminal wit a shurtcut
[02:58] <JavierA> my problem isI am trying to manually install x11vnc which is a vnc server in order to connect remotely
[02:58] <Doc-Saintly> I'm trying to clear up space in /boot , but doing the apt-get remove <kernel name> is giving errors about missing dependencies, and suggests using apt-get -f install
[02:58] <Doc-Saintly> why is it suggesting to install something when I'm trying to remove? O.o
[02:58] <JavierA> this is the command  I am usig
[02:59] <JavierA> sudo apt-get install x11vnc
[02:59] <JavierA> then it is supposed to wait for for the password and then install it
[02:59] <Doc-Saintly> I'm using the top rated answer here: http://askubuntu.com/questions/345588/what-is-the-safest-way-to-clean-up-boot-partition
[02:59] <Bassem> dos it only monitor clipboard? can't it monitor firefox for downloading files
[02:59] <fire_agate> I am trying to figure out the name o my network adapter, its not eth0
[02:59] <JavierA> then I type te command
[03:00] <JavierA> x11vnc
[03:00] <fire_agate> in arch, i would just run systemctl dhcpcd.... how do i do it in ubyntu?
[03:00] <JavierA> it is meant to start the vnc server and listen for a client connection
[03:00] <JavierA> when I try to connect from another laptop it cannot
[03:00] <JavierA> if I try the same commands in a different laptop that one works
[03:01] <k1l> fire_agate: "ifconfig"
[03:01] <k1l> fire_agate: that would be the same on arch, btw.
[03:02] <JavierA> so my question for you: is there a package already installed in Xubuntu to launch an VNC server without trying to install it? My concern is the installation of the x11vnc may be failing and i cann not see that.
[03:03] <fire_agate> k1l: thx, yeah im new to linux in general, been running arch for a few months, just put lxle on an old computer for my parents
[03:03] <alwan> hello mate
[03:03] <fire_agate> k1l: btw, i went to the lxle channel, but it was empty! so thats why im still hangin close to ubuntu haha
[03:04] <alwan> I'm from Indonesia, and currently using Ubuntu MATE 15.10
[03:04] <k1l> Doc-Saintly: pastebin the output please to give us a clue whats going in
[03:04] <alwan> It's a robust, superb Linux distro
[03:04] <k1l> *on
[03:05] <k1l> fire_agate: but we cant help you on the lxle issues. see their site where to get help. or install lubuntu and get the ubuntu community support
[03:05] <Doc-Saintly> k1l: I think I've got it. After reading more in the article it explains that if /boot is compeltely full it won't let you even do the clean up "safely"
[03:05] <Doc-Saintly> I think it's going now... But, I must ask - how is it even possible that this hasn't been automatically fixed yet? :S
[03:05] <Doc-Saintly> This feels like a problem from the 90's, having to manually clean out old kernels
[03:06] <k1l> Doc-Saintly: usually you dont need to. just run "sudo apt-get autoremove"
[03:06] <Doc-Saintly> well, I mean if it fnids out "oh crap, boot is full" why doesn't it do that automatically?
[03:06] <Doc-Saintly> finds*
[03:07] <k1l> Doc-Saintly: and well, dont follow 90s howtos regarding the size of /boot  since the kernel got heavier since then.
[03:07] <tgm4883> Doc-Saintly: I thought I read that was going to happen in 16.04
[03:07] <Doc-Saintly> k1l: I did the suggested partition size from the ubuntu installer ;)
[03:07] <Doc-Saintly> it just baffles / frustrates me. Ubuntu is supposed to be easier to use, and here I am cleaning out old kernels ~.~
[03:08] <k1l> Doc-Saintly: ubuntu is cleaning old kernels.
[03:08] <Doc-Saintly> care to elaborate?
[03:09] <k1l> "The following packages are not needed anymore: linux-headers-3.13.0-71 linux-headers-3.13.0-71-generic  linux-image-3.13.0-71-generic linux-image-extra-3.13.0-71-generic"
[03:09] <k1l> so i just run a "sudo apt-get autoremove" and i am done. iirc the gui updater does that ootb. but i am not sure about that
[03:13] <Doc-Saintly> well, I wouldnt' coutn that as it cleaning old kernels
[03:13] <Doc-Saintly> I'm telling it to.
[03:13] <Doc-Saintly> god my typing is horrific
[03:14] <Doc-Saintly> someone get a ruler and slap may hands.
[03:14] <Doc-Saintly> for the last ~6 months I've logged in periodically and done: sudo apt-get update, sudo apt-get upgrade, and it always updates packages, apparently I need to add autoremove to that.
[03:29] <Rsvc> fuck ubuntu
[03:29] <alwan> Ubuntu is so far the best, easiest distro
[03:41] <rchavik> hi, using dhcp in 14.04, my wlan0 interface has a secondary IP address.  the first IP is given by local dhcp server, but the second one is not. how would i debug/find where that ip address is assigned/configured?
[03:43] <k1l> rchavik: what does "ifconfig" look like? can you pastebin it?
[03:43] <rchavik> nvm.. i think i've found out
[03:44] <rchavik> k1l, the address came from /etc/NetworkManager/system-connections/<ssid-name>
[03:45] <SeriouslyLaugh> !pm | Tau
[03:45] <SeriouslyLaugh> also don't spam
[03:45] <SeriouslyLaugh> thx
[03:45] <rchavik> k1l, i didn't have ifconfig output, i have out ip addr output: https://gist.github.com/rchavik/953e8035d358dfa2f992
[03:46] <k1l> SeriouslyLaugh: you got pm abuse? then report to #ubuntu-ops or #freenode
[03:47] <fling> Is anyone here from China?
[03:47] <Dylan____> How can indual
[03:47] <Dylan____> How can i dualboot ubuntu and windows 10 safely
[03:47] <k1l> !cn | fling
[03:47] <fling> k1l: thanks.
[03:47] <Dylan____> Because i have shrunk my :C to 50 gigs for ubuntu
[03:48] <Dylan____> But problem is that when i put my usb in to the laptop it says no operating system detected
[03:48] <Dylan____> Anyone help?
[03:48] <Ispira> does it say thatwithout the usb in as well Dylan____ ? or does it boot normally
[03:48] <Dylan____> No this is what happens
[03:49] <sruli> Dylan____: did u make the  usb eufi or leagcy
[03:49] <pmr_> hola ?
[03:49] <Dylan____> I put the usb be in boot into the live enviroment click on install ubuntu go through everything then it says no os installed even though i got windows 10 installed on my laptop
[03:49] <Dylan____> And i have shrunk C: by 50 gigs so i give that to ubuntu
[03:50] <alwan> Dylan____ you must use 64bit Ubuntu instead
[03:50] <Dylan____> However when i go into the partitions it labels free space 50001 gigs
[03:50] <Dylan____> My laptop is 64bit
[03:50] <Dylan____> And my usb is 64bit
[03:50] <Dylan____> Idk i can boot into efi
[03:52] <alwan> have you changed your boot sequence to usb ?
[03:52] <Dylan____> The laptop im trying to dualboot is a hp pavillion 15
[03:53] <kknight> hello m using gnome and want to put a script on startup menu how to do that?
[03:53] <Dylan____> The preinstalled os was wiped off there with recovery drive cause i installed ubuntu over it then i installed the windows 10 iso and put it on there now im planning to dualboot windows 10 and ubuntu 14.04
[03:54] <Dylan____> Is there someway i can do this
[03:54] <alwan> Lucky you
[03:54] <after> Hi
[03:54] <alwan> I'm using hp pavillion 14
[03:54] <alwan> I got the same problem
[03:54] <alwan> Now I'm using only ubuntu :D
[03:54] <after> can someone tell me how do I get AppArmor to apply a profile based on the UID/GUID of the process rather then the filename?
[03:54] <after> please ^
[03:55] <Gallomimia> i can't figure out how to make an initrd which has mdadm lv2m and dmcrypt installed, and then install it for grub2. would anyone care to handhold me thru this process? i'm actually very intimidated by the manuals i've read so far
[03:57] <Dylan____> Alwan but you overided your laptop didnt y
[03:57] <Dylan____> Your windows
[03:57] <Dylan____> And ur recovery partiton
[03:57] <Dylan____> U cant recover those
[03:57] <alwan> Yes..
[03:57] <Dylan____> Sadly
[03:57] <after> I want to have one PHP site that has APpArmor limiting the PHP->network access, and another site where the PHP process can access the ointernet
[03:57] <alwan> I finally wiped out my windows 8.1
[03:57] <Dylan____> Haha same
[03:57] <Dylan____> Im going to install ubuntu on my pavillion 15
[03:57] <alwan> It is vendor issue
[03:58] <Dylan____> Yeah but i got windows working on my mac Xp
[03:58]  * Gallomimia was fortunate enough to have no windows installed on the current system when purchased.
[03:58] <Dylan____> And like ubuntu
[03:58] <alwan> previously I dual booted Ubuntu 14.04 and windows 8 in ASUS UEFI laptop
[03:58] <alwan> there is no partition issue
[03:58] <elisa87_> hey can you have a look at here? it is with regard to using netem controlled by tc command that gives 'RTNETLINK answers: File exists' error http://stackoverflow.com/questions/34348219/rtnetlink-answers-file-exists
[03:59] <Dylan____> Lucky
[03:59] <Dylan____> Im just checking if my bootable win10 still works usb
[03:59] <Dylan____> Just so if i do sanna uninstall ubuntu
[04:00] <alwan> yes
[04:00] <alwan> maybe you could try this
[04:00] <alwan> https://technet.microsoft.com/en-us/library/cc755238.aspx
[04:00] <alwan> I've already given up
[04:01] <alwan> I'm working in a web hosting company, so I prefer Linux to windows
[04:02] <Dylan____> Haha nice
[04:02] <Dylan____> It works i checked
[04:03] <Dylan____> I can boot to reinstall if i wanan
[04:05] <Gallomimia> no handholders for mk-initrd procedures? i figured
[04:09] <JeDa> j_
[04:09] <kknight> hello m using gnome and want to put a script on startup menu how to do that?
[04:09] <JeDa> such copycat of my nick _j
[04:16] <Dylan____> Guys i ran into some gpt error installing
[04:16] <Dylan____> I clicked no
[04:22] <tlt> the gpt has to clear out, son -- Dylan____
[04:23] <tlt> Dylan____, there can't be any gpt errors
[04:31] <Dylan____> Wellnthats what it said
[04:31] <Dylan____> Anyways how can i update libreoffice
[04:31] <Dylan____> U know how ubuntu comes with libreoffice 4 how i update to 5
[04:32] <k1l_> using ubuntu 14.04?
[04:32] <Dylan____> Yeah
[04:33] <k1l_> you will need a PPA for that
[04:34] <Dylan____> Really?
[04:35] <paprj> Hi
[04:36] <paprj> has anyone had issues with 15.10 ?
[04:36] <alwan> try this http://www.webupd8.org/2015/08/install-libreoffice-50-in-ubuntu-or.html
[04:37] <paprj> who alwan ?
[04:38] <alwan> I'm using Ubuntu MATE 15.10 and do not find any issue <paprj> wh
[04:39] <paprj> just installed mate, had just 15.10 and it lost the sidebar and everything that went with it . so now am trying mate
[04:39] <alwan> of course
[04:39] <alwan> MATE is different desktop
[04:40] <paprj> yes
[04:40] <alwan> it is a traditional desktop, previously known as gnome2
[04:40] <paprj> had just plain jane ubuntu 15,10 upgrade fom 15.4
[04:41] <paprj> hoping same thing does not happen here in mate
[04:42] <paprj> dang 2nd error message since install about a hour ago
[04:44] <sampl3> Good day all! Has anybody tried running the Arduino IDE on 15.10? I have a feeling my issues is a corner case bug.
[04:44] <paprj> executablepath   /usr/bin/marco
[04:46] <elisa87_> can someone tell me why I get this error in Ubuntu http://serverfault.com/questions/743885/rtnetlink-answers-file-exists-when-using-netem-with-tc
[04:46] <Dylan____> Guys my hp pavillion shows up with four cores
[04:46] <foli_> hi
[04:46] <Dylan____> Although i only have teo
[04:46] <Dylan____> Two
[04:47] <Dylan____> My intel is
[04:47] <Dylan____> A
[04:47] <alwan> the other 2 cores are hyperthread core
[04:47] <Dylan____> What???
[04:47] <kolobyte> elisa87_: have you if'd up if'd down?
[04:47] <Dylan____> Le
[04:48] <kolobyte> ifup eth0; ifdown eth0
[04:50] <Dylan____> My intel is a core i3-4030U cpu 1.90 ghz x4
[04:50] <Dylan____> But it only has two cores
[04:50] <Dylan____> So whats happened
[04:51] <Dylan____> Says i got intel haswell mobile graphics
[04:51] <Dylan____> Never heard of that
[04:53] <Dylan____> Its got two cores and 4 threads
[04:53] <Dylan____> So whats that mean
[04:54] <Chicken_Wrap> Hello.
[04:54] <Gallomimia> 4 logical cpus. hyperthreading is somewhat awesome Dylan____
[04:54] <Gallomimia> you got a 2 core cpu and it acts like a 4 core
[04:54] <Dylan____> Ohh
[04:54] <Dylan____> Cause when i had windows it didnt say that
[04:55] <Gallomimia> in less layman's terms, the cpu has 2 logic units, each of which has a double set of registers, so instead of waiting for more data, the logic unit turns around and crunches some data from the other side
[04:56] <Gallomimia> Dylan____: the super geek details: http://ark.intel.com/products/81018/Intel-Core-i3-4030U-Processor-3M-Cache-1_90-GHz
[04:59] <Gallomimia> pretty sweet looking cpu to have in a laptop tbh
[05:01] <Dylan____> Haha yeah
[05:02] <Dylan____> Its my hp pavillion 15
[05:02] <Dylan____> I didnt really understand it at first
[05:02] <Gallomimia> it says it has a built in graphics processor, but it doesn't look particularly good. is there another gpu in the system?
[05:02] <Dylan____> I think its just that
[05:02] <Gallomimia> still decent
[05:02] <Dylan____> My paviilion runs ubuntu 14.04 but its updating to 15.04
[05:03] <Gallomimia> my laptop is 5 years old, and it has a graphics processor built into the system controller. runs pretty fast
[05:03] <Dylan____> So yeah its practically better then my 5 year old macbook thst runs ubuntu 14.04lts
[05:03] <Gallomimia> yep. mbp  late 2010
[05:03] <Dylan____> And my macbook has a 2.60ghz core two duo
[05:03] <Dylan____> Or something
[05:03] <Gallomimia> same. 8 gigs of ram
[05:03] <Dylan____> Mines 4
[05:03] <Gallomimia> nvidia 320m
[05:03] <Gallomimia> i upgraded
[05:03] <Dylan____> Yep
[05:03] <Dylan____> I got nvidia 320m i think its bad isnt it?
[05:03] <Gallomimia> no
[05:03] <Dylan____> But the mac gets hot
[05:04] <Dylan____> Ohh
[05:04] <Gallomimia> i think it rocks the 720p screen
[05:04] <Dylan____> Haha
[05:04] <Gallomimia> oh shit yes it gets hot
[05:04] <dan_> Hello world
[05:04] <Dylan____> the mac heats up upon bootup
[05:04] <dan_> hello world
[05:04] <Dylan____> Yep
[05:04] <Dylan____> Idk probably normal
[05:04] <dan_> tfw I dont want to learn irssi hotkeys
[05:04] <Gallomimia> i used to crank 94C with EVE online running
[05:04] <SeriouslyLaugh> !ot
[05:05] <Dylan____> Lol
[05:05] <Dylan____> I just tried to upgrade to 15.04 had the error st the second thing
[05:05] <ultrixx> hi is there anything i have to do after installing ubuntu 15.10 on an ssd-drive?
[05:05] <Dylan____> Something sbout the software
[05:05] <Gallomimia> ultrixx: change your boot order? why, is it not working?
[05:06] <Gallomimia> Dylan____: yesterday someone recommended not upgrading, but clean installing instead. i tend to agree
[05:06] <Dylan____> Ohh ok haha
[05:06] <Dylan____> Ill wont worry then
[05:07] <ultrixx> Gallomimia: no. does ext4 in ubuntu use TRIM by default?
[05:07] <Gallomimia> ultrixx: is it an evo840 ?
[05:07] <Guest52873> q
[05:07] <ultrixx> no
[05:07] <Gallomimia> then i don't think it matters
[05:08] <ultrixx> Gallomimia, it does matter on an ssd
[05:08] <Gallomimia> only if your ssd has a bug in its firmware leading to dataloss
[05:08] <Gallomimia> ie the evo840
[05:08] <Gallomimia> (of which i have two just sitting here :(   )
[05:08] <raspberrypifan> hi im building an LFS system, what do i need to get ubuntu package compatibility
[05:09] <somsip> raspberrypifan: you start from an ubuntu install
[05:09] <amicrawler> need help upgrade my kernal lost my wifi drivers
[05:09] <amicrawler> it was working great
[05:10] <raspberrypifan> how does it make a different what distro i start from? i honestly do know
[05:10] <Dylan____> Whats the comouter amicrawler
[05:10] <amicrawler> untill ubunut upgrae the krnal
[05:10] <somsip> !minimal | raspberrypifan (use this)
[05:10] <Dylan____> Computer
[05:10] <Dylan____> Is it a mac?
[05:10] <amicrawler> lenova g50
[05:10] <Dylan____> Mm
[05:10] <Gallomimia> aw
[05:10] <Gallomimia> !lenovo
[05:10] <Dylan____> Idk try install dkms
[05:10] <amicrawler> ac wifi
[05:10] <raspberrypifan> i build lfs from the minimal cd image?
[05:10] <Dylan____> Or look somewhere
[05:11] <somsip> raspberrypifan: no - and I'm going to stop talking to you now as you're coming across as a troll, or very dim
[05:11] <amicrawler> not sure if the kernal is supported yet
[05:11] <raspberrypifan> im not trolling at all, so i might be very dim then
[05:11] <Dylan____> Forgot how i update libreoffice
[05:12] <Gallomimia> dylan, there's a central program that updates everything
[05:12] <Dylan____> I did that but it didnt update it
[05:12] <Dylan____> Even though i checkmarked it
[05:12] <somsip> Dylan____: then therer are no updates
[05:12] <Gallomimia> anything and everything that you have installed, get updates.
[05:12] <somsip> !info libreoffice | Dylan____ (current version is...)
[05:12] <amicrawler> ath10k-dkms that is what i was using
[05:12] <Gallomimia> some updates get delayed.
[05:12] <Dylan____> My current version is 4
[05:12] <Gallomimia> 4...
[05:12] <Dylan____> I cant update to libreoffice 5
[05:12] <Gallomimia> that's not very specific
[05:13] <raspberrypifan> i wish you could what it is im not understanding
[05:13] <Dylan____> Even though i checkmarked it in software updater
[05:13] <somsip> Dylan____: official packages are in the official repos. Unofficial packages are not supported here. See !ppa
[05:13] <Dylan____> !ppa
[05:13] <foli_> hi
[05:13] <Dylan____> O
[05:13] <Dylan____> K
[05:14] <amicrawler> how do i go back to my other kernal on boot
[05:15] <amicrawler> or grub menu on boot
[05:16] <Gallomimia> holding left shift might help you if it's hidden
[05:17] <raspberrypifan> is it not possible to build a brand new distro from source that is compatible with ubuntu packages
[05:22] <litzuhsien> anyone here
[05:22] <Gallomimia> raspberrypifan: i'm sure it is, since 2 distros have done it already. do you know how? if you do, please share its an interesting topic to me
[05:23] <elisa87_> I updated my question with more details I wonder if anyone might have any idea? http://serverfault.com/questions/743885/rtnetlink-answers-file-exists-when-using-netem-with-tc
[05:25] <myztic> whenever I click a Link Firefox pops immediately up, I don't want that
[05:26] <Gallomimia> what would you prefer?
[05:26] <somsip> myztic: and what do you want?
[05:26] <myztic> is that firefox's fault or something to do with ubuntu.unity?
[05:26] <Gallomimia> ubuntu.unity
[05:26] <myztic> well I want the link to open in a new tab without the focus switching to the firefox window
[05:26] <myztic> I often open up links to read "later" when I want to, not "IN YOUR FACE READ NOW"
[05:26] <Gallomimia> oh. that might be a setting in firefox
[05:27] <myztic> Well with clicking a link I mean clicking a link outside of Firefox and Firefox pops up
[05:29] <goddard> im having issues running two bluetooth devices at once.  One is a mouse and the other is a speaker.
[05:29] <raspberrypifan> Gallomimia: well im trying to understand
[05:30] <myztic> Gallomimia: I also asked in #firefox
[05:30] <burgerbrigade> hello. i'm running a clean ubuntu machine from docker. when i try to `apt-get install gcc -y` i get the error `E: Unable to correct problems, you have held broken packages.`
[05:31] <aphrodite> hi, need help installing pip
[05:31] <burgerbrigade> aphrodite: did you try apt-get?
[05:31] <aphrodite> yes did
[05:31] <aphrodite> it gives error
[05:31] <burgerbrigade> aphrodite: which error?
[05:31] <JeDa> ^
[05:32] <aphrodite> cannot locate package
[05:32] <aphrodite> i tried updating the repo also
[05:32] <aphrodite> is there any specific repo that i must add
[05:32] <JeDa> aphrodite: apt-get install python-pip python3-pip
[05:32] <JeDa> that should work
[05:32] <lulcat> i was going to say give us more info about your distro. then I realised i'm in #ubuntu
[05:33] <myztic> aphrodite: for the future you can search packages with apt-cache search pip
[05:33] <JeDa> lulcat: lol
[05:33] <lulcat> apt-get update
[05:33] <lulcat> and then try again
[05:33] <truGreen> asdDoes anyone know how to get into #php ??
[05:33] <truGreen> It's invite only
[05:33] <myztic> truGreen: it's not
[05:33] <myztic> truGreen: just joined, it might be for registered users only
[05:33] <truGreen> I cant join
[05:34] <truGreen> I am registered
[05:34] <truGreen> Ioh wait
[05:34] <truGreen> no
[05:34] <truGreen> I am not
[05:34] <JeDa> truGreen: probably
[05:34] <truGreen> I had wrong nickname
[05:34] <truGreen> doh
[05:34] <burgerbrigade> My docker ubuntu craps its pants when I `apt-get update` with errors like `couldn't resolve archive.ubuntu.com`. wtf, is this docker image broken beyond belief that it's pointing to a nonexistant domain?
[05:34] <JeDa> truGreen: it is ##php
[05:34] <JeDa> burgerbrigade: there's a DNS resolver error
[05:34] <myztic> JeDa: doesn't matter #php forwards to ##php
[05:35] <JeDa> check your DNS servers
[05:35] <lulcat> burgerbrigade
[05:35] <lulcat> short-term solution would be to add it to /etc/hosts
[05:35] <JeDa> myztic: yeah, but there may be some reasons, like, banned/already on channel, etc
[05:35] <aphrodite> burgerbrigade, JeDa, lulcat, myztic: E: Unable to locate package python3-pip
[05:35] <aphrodite> this is the eroor i get
[05:35] <aphrodite> *error
[05:36] <JeDa> aphrodite: apt-get update
[05:36] <lulcat> burgerbrigade: echo "91.189.92.200 archive.ubuntu.com" >> /etc/hosts
[05:36] <lulcat> and try again
[05:36] <lulcat> also check /etc/resolv.conf make sure you have something like nameserver 8.8.8.8
[05:36] <lulcat> in there.
[05:36] <aphrodite> apt-get update stops at waiting for headers...
[05:36] <burgerbrigade> lulcat: why would docker give me this broken image? so weird.
[05:36] <myztic> burgerbrigade: and then sudo apt-get update && sudo apt-get install python3-pip
[05:36] <JeDa> myztic: why the python3 thing
[05:36] <myztic> I mean aphrodite ^
[05:37] <JeDa> lol
[05:37] <myztic> sorry, python-pip
[05:37] <myztic> or python3-pip depending on what you need
[05:37] <21WAAJP6M> ok i fixed it
[05:37] <aphrodite> but apt-update itself doesn't work
[05:37] <burgerbrigade> myztic: i'm not trying to install python-pip, but thanks lol. i'm just weirded out by the dns error. it now seems to be updating fine.
[05:37] <aphrodite> it gives waiting for headers..
[05:38] <myztic> burgerbrigade: yeah I did not mean you, sry
[05:38] <myztic> this channel is crowded ;)
[05:38] <burgerbrigade> it's all good under my hood )B))
[05:38] <lulcat> waiting for headers...
[05:38] <JeDa> aphrodite: then your connection is not good
[05:38] <Gallomimia> aphrodite: does it stay long? is your connection slow? pick a closer mirror
[05:38] <myztic> or the server sucks
[05:38] <JeDa> ^
[05:38] <lulcat> aphrodite
[05:38] <myztic>  or mirror
[05:38] <burgerbrigade> what causes the dns server to be broken in a clean ubuntu image?
[05:38] <lulcat> apt-get clean
[05:39] <lulcat> mv /var/lib/apt/lists /var/lib/apt/lists.old
[05:39] <lulcat> actually wait
[05:39] <aphrodite> Gallomimia:the connection isn't slow, and yes it stays fo long..until i force stop it
[05:39] <lulcat> burgerbrigade post your /etc/resolv.conf
[05:39] <aphrodite> what can be a closer mirror
[05:40] <Gallomimia> that's not the easiest question. and impossible to answer without knowing more about you
[05:40] <amicrawler> ok
[05:40] <burgerbrigade> aphrodite: tell us your address
[05:40] <amicrawler> back  i got it
[05:40] <Gallomimia> is your connection very slow aphrodite??
[05:41] <aphrodite> not the connection is not slow
[05:41] <amicrawler> here is what i used and it worked 100%
[05:41] <amicrawler> http://askubuntu.com/questions/678145/my-wifi-qualcomm-atheros-device-168c0041-rev-20-doesnt-show-up-and-work-in
[05:41] <Gallomimia> ok. go to software and updates settings, and find the option to auto pick a mirror
[05:41] <aphrodite> ok
[05:41] <Gallomimia> System Settings > Software & Updates (bottom middle icon with a box)
[05:42] <aphrodite> Gallomimia: trying it
[05:42] <amicrawler> i did at the bottom of the page is where i found the anwser
[05:43] <testf> I'm trying a netboot install like in https://help.ubuntu.com/community/Installation/NetbootInstallFromInternet     for trusty LTS from grub. It says I should pick up initrd.gz and linux files from http://cdimage.ubuntu.com/netboot/    . Do I dig down into trusty-pdates/ain/installer-amd64/current/images/netboot/ubuntu-installer/amd64     (I have an amd64 obviously)
[05:45] <burgerbrigade> lulcat: how do i find out what resolv.conf does without using the cloud?
[05:45] <lulcat> the nimbus cloud ?
[05:45] <lulcat> resolv.conf is a file
[05:45] <lulcat> cat /etc/resolv.conf and paste the output
[05:46] <lulcat> it should look like this:
[05:46] <lulcat> #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
[05:46] <lulcat> nameserver 8.8.8.8
[05:46] <lulcat> nameserver 8.8.4.4
[05:46] <amicrawler> im getting 14MBps down
[05:46] <Gallomimia> !paste | burgerbrigade
[05:46] <burgerbrigade> i'm looking for 'meta help'. i know it's a file. maybe if i type man resolv.conf i'll see how it's used. is it just the IPs of your dns servers?
[05:46] <amicrawler> and 1.5MBps up
[05:46] <burgerbrigade> Gallomimia: i'm not posting my resolv.conf
[05:48] <lulcat> ......
[05:48] <lulcat> god forbid he posts his /etc/resolv.conf
[05:48] <lulcat> he may get 1337 hacked if he does
[05:49] <burgerbrigade> lol
[05:51] <burgerbrigade> so is there no native way in ubuntu to find the function of a specific file name? i'll goto the cloud
[05:51] <Gallomimia> yep its called google
[05:52] <burgerbrigade> Gallomimia: so the cloud?
[05:52] <burgerbrigade> thanks!
[05:52] <lulcat> the cloud ?
[05:52] <lulcat> what the fk is the cloud
[05:52] <burgerbrigade> lol
[05:53] <lulcat> and why would the cloud tell you what resolv.conf does ?
[05:53] <lulcat> is he like an all-knowing entity ?
[05:53] <burgerbrigade> he don't be evil
[05:54] <burgerbrigade> 8.8.8.8 8.8.4.4 are google dns servers right?
[05:54] <xintox> how do i install ack-grep on ubuntu?
[05:55] <AndroUser> Yeah, those are google's dns servers.
[05:56] <burgerbrigade> that's smaht. get even more data on which sites people go on.
[05:57] <testf> why does my resolv.conf show 127.0.1.1 (a loopback address) ?
[05:58] <testf> xintox: apt-get install ack-grep   ?
[05:58] <xintox> package not found
[05:58] <burgerbrigade> testf: local dns cache in case you flush your browser's? lol i dunno.
[05:58] <bryceml> You probably have dnsmasq, a local dns server that is supposed to be more configurable or faster or something.
[05:58] <myztic> Gallomimia: I found the solution, if you set browser.tabs.loadDivertedInBackground to true firefox won't pop up :))
[05:59] <xintox> E: Unable to locate package ack-grep
[05:59] <Gallomimia> myztic: what is the procedure for editing that item? text editor?
[05:59] <testf> xintox, probably in some extra repo
[05:59] <myztic> Gallomimia: about:config
[05:59] <xintox> testf: they removed it
[05:59] <xintox> http://packages.ubuntu.com/wily/ack-grep
[06:00] <xintox> can't install this for some reason. its a brand new ubuntu 15.10 install
[06:00] <xintox> i'm guessing i don't have the right sources
[06:00] <testf> ah. well it's there in trusty
[06:01] <Gallomimia> myztic about who the what now?
[06:01] <ubuntu-studio> Hello World!
[06:01] <SebastianTCL> I originally installed ubuntu then installed lubuntu desktop
[06:01] <SebastianTCL> can i uninstall gnome?
[06:01] <SebastianTCL> or will that mess things up?
[06:02] <ubuntu-studio> I am highly privileged to message you from Mars Mission
[06:02] <Gallomimia> cooooool.
[06:03] <ubuntu-studio> THanks Gallomimia
 no you won't messed up the whole thing
[06:03] <testf> xintox, for trusty it's in universe (apt-cache showpkg ack-grep)
[06:03] <SebastianTCL> alwan,  how do i do it then?
[06:03] <Gallomimia> ubuntu-studio: hows the bandwidth and ping?
[06:03] <ubuntu-studio> Is anyone listening to me
[06:03] <mircx1> Hello
[06:04] <ubuntu-studio> just say Hi.. so i can confirm if its not a fake chat
[06:04] <ubuntu-studio> I am new here
[06:04] <ubuntu-studio> :P
[06:04] <bryceml_> hello
[06:04] <mircx1> i try install something and i get error what i need install for it?
[06:04] <mircx1> A suitable C++ compiler could not be detected on your system!
 are you ubuntu studio developer ? :D
[06:04] <ubuntu-studio> Yes!
[06:04] <lulcat> apt-get install gcc-g++
[06:04] <ubuntu-studio> Lol! Never tried this
[06:04] <mircx1> i do
[06:04] <ubuntu-studio> its looks like I am in Mars :P
[06:05] <lulcat> or: apt-get install g++-4.9
[06:05] <mircx1> but again error
[06:06] <mircx1> no work
[06:06] <mircx1> i do that
[06:06] <lulcat> errr wait;...
[06:06] <bazhang> build-essential is what to install there mircx1
[06:06] <lulcat> apt-get install g++
[06:06] <mircx1> inspircd in ubuntu 14.04
[06:06] <lulcat> try that it should work
[06:06] <bazhang> its a metapackage that contains the others
[06:07] <lulcat> or that
[06:07] <mircx1> this a error i get
[06:07] <mircx1> http://pastie.org/10639210
[06:07] <lulcat> mircx1
[06:07] <lulcat> as we have already said
[06:08] <lulcat> and as the configure also said
[06:08] <bazhang> !info build-essential | mircx1
[06:08] <lulcat> you need a C++ compiler
[06:08] <bazhang> mircx1, install that ^^^
[06:08] <lulcat> so you either apt-get install g++ for the C++ compiler
[06:08] <lulcat> if you're not missing anything else
[06:08] <lulcat> or install the build-essential altogether
[06:09] <mircx1> g++ is already the newest version.
[06:09] <lulcat> interesting
 try this http://www.psychocats.net/ubuntu/purexubuntu
[06:09] <lulcat> mircx1: what's the output of g++  ?
[06:09] <mircx1> build-essential is already the newest version
[06:09] <alwan> but it is safer to use Lubuntu instead
[06:10] <alwan> download the lubuntu iso and make a fresh install
[06:10] <xintox> man
[06:10] <mircx1> 4.9
[06:10] <xintox> pita
[06:10] <alwan> I'm currently using pure mate desktop and forget the gnome package details
[06:10] <xintox> 15.10 doesn't have anything in it
[06:10] <xintox> ImportError: No module named 'setuptools'
[06:10] <xintox> how do i install this?
[06:10] <lulcat> the output of g++ is 4.9 ?
[06:11] <lulcat> that's not right
[06:11] <lulcat> do you have a path set up for it ?
[06:12] <lulcat> Set the CXX environment variable to the compiler binary path if this is incorrect.
[06:12] <mircx1> no
[06:12] <mircx1> but i do all configure
[06:13] <lulcat> mircx1
[06:13] <lulcat> type in g++
[06:13] <lulcat> does it say unknown command ?
[06:14] <testf> how do I access a grub menu from trusty? I just have a ....   graphical before the display manager shows
[06:14] <bryceml_> I think you can hit shift as it's booting
[06:14] <testf> I tried esc but that just shows it processing all the init stuff
[06:14] <testf> I tried shift but that did not do anything
[06:15] <lulcat> mircx1: 'which g++'
[06:15] <mircx1> i told to you
[06:15] <mircx1> 4.9
[06:15] <bryceml_> testf: I think you might have to hit it repeatedly
[06:15] <testf> bryceml_, thanks, holding down shift did do it
[06:15] <lulcat> hmm
[06:16] <mircx1> apt-get install g++-4.9
[06:16] <lulcat> you don't get it
[06:16] <lulcat> TYPE IN
[06:16] <lulcat> the following command: which g++
[06:19] <josePHPagoda> Hi All!  So I'm trying to mount an ext4 partition that's inside of LVM.  I have the volume visible to me, but whenever I try to mount it I get an error about how it is the wrong fs type or bad superblock.  When I run a fsck on it, it says it is clean and without issues.  Any ideas?
[06:21] <bryceml_> what command and arguments do you use to mount it?
[06:23] <josePHPagoda> simply this
[06:23] <josePHPagoda> mount /dev/dm-0 /mnt/olddrive
[06:23] <myztic> Gallomimia: in the address bar in firefox type about:config which leeds you to the internal configuration options in firefox
[06:24] <myztic> Gallomimia: look for browser.tabs.loadDivertedInBackground and toogle it to true and that's it
[06:25] <myztic> Gallomimia: you are no Firefox User I assume ;)
[06:25] <bryceml_> josePHPagoda: that looks like the lvm partition that contains the ext4 partition, there should be something in /dev/mapper/ that is the actual ext4 partition
[06:27] <testf> https://help.ubuntu.com/community/Installation/NetbootInstallFromInternet says I can type lines at grub command prompt. root=(hd0,1) is accepted. linux /boot/linux  fails with "invalid magic number"
[06:28] <josePHPagoda> i thought that, but when I try to do the mount with /dev/mapper/vg1-lv1 /mnt/olddrive i get the same error
[06:29] <josePHPagoda> when I run fsck /dev/mapper/vg1-lv1 it comes back immediately saying it's a clean ext4 partition (gives me a file count and everything)
[06:30] <josePHPagoda> well, fsck.ext4 -v /dev/mapper/vg1-lv1
[06:32] <josePHPagoda> and I just did a forced check (adding the f flag to fsck) and it camge back saying all was well
[06:33] <bryceml_> josePHPagoda: the only other things I could think to try is to specify the filesystem type with the -t option with mount, or setup an fstab line and use mount -a, or maybe us blkid to lookup the uuid and mount using that
[06:33] <Gallomimia> myztic: im no poweruser of ffox i guess.
[06:34] <josePHPagoda> bryceml_: unfortunately, i've tried all of that already
[06:34] <josePHPagoda> it's just odd that it says it's good to go, but doesn't actually do work :-/
[06:35] <josePHPagoda> file -s devicename gives me output telling me it's ext4
[06:38] <josePHPagoda> hmm, when I check dmesg is says bad block size
[06:39] <josePHPagoda> ah ha!
[06:39] <josePHPagoda> i might have it figured out
[06:40] <bryceml_> josePHPagoda: what was it?
[06:41] <josePHPagoda> block size was too large on the disk, so the kernel wasn't happy
[06:42] <josePHPagoda> ended up using fuseext2 to do it
[06:42] <josePHPagoda> since it lets you have larger block sizes, which seemed happy
[06:43] <bryceml_> josePHPagoda: how did it get a block size that was too big? did it come from another machine?
[06:44] <josePHPagoda> yes
[06:44] <josePHPagoda> from a nas
[06:44] <josePHPagoda> a friend had his nas fail
[06:44] <josePHPagoda> i'm helping him get his data
[06:44] <lulcat> nas ?
[06:45] <bryceml_> Network Attached Storage
[06:47] <roshan_> Hi
[06:48] <roshan_> I am getting this issue  in php while installing wordpress on Ubuntu
[06:48] <roshan_> 07-Dec-2015 10:20:54 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20100525/php_mbstring.dll' - /usr/local/lib/php/extensions/no-debug-non-zts-20100525/php_mbstring.dll:
[06:49] <josePHPagoda> roshan_: do you play dota?
[06:49] <josePHPagoda> did you install php via apt-get?
[06:49] <roshan_> yes i have installed.
[06:49] <roshan_> php via apt get
[06:49] <roshan_> php via apt-get
[06:50] <roshan_> apt-get install libapache2-mod-php5
[06:51] <lulcat> this channel is weird
[06:51] <testf> I've got grub 2 and my root is on /dev/sda1       what is x in       root=(hd0,x) ?
[06:52] <roshan_> i am getting php_mbstring extension issue.
[06:54] <bryceml_> roshan_: when I installed it I had to install the php5 package as well
[06:55] <josePHPagoda> bryceml_: exactly
[06:55] <roshan_> yes i have installed all the php packages
[07:01] <bryceml_> roshan_: those paths don't exist on my system either, dll's are normally for windows and usually only show up in linux when using wine.  is it a windows version of wordpress?
[07:02] <roshan_> yes may be i had took backup from server and trying to install in on my local system
yes may be i had took backup from server and trying to install in on my local system
[07:03] <roshan_> bryceml_: yes may be i had took backup from server and trying to install in on my local system
[07:04] <roshan_> bryceml_: please tell me how can i install and enable mbstring in ubuntu system
[07:11] <bryceml_> roshan_: http://php.net/manual/en/mbstring.installation.php
[07:20] <bryceml_> mbstring should already be installed with the libapache2-mod-php5 package, it's probably a wrong reference from one of the php files in wordpress.  It may be easier to start with a fresh copy of wordpress and move the files necessary to make it like the original.
[07:22] <aizarry> hello guys im new here and new at ubuntu ^_^
[07:25] <aizarry> guys how would i know if i've installed my graphics card correctly? im using ubuntu15.10
[07:25] <Dylan____> Hello aizarry welcome
[07:25] <Dylan____> Whats graphics card
[07:25] <aizarry> ati readeon graphics
[07:25] <Dylan____> Can you check the additonal drivers ?
[07:26] <Dylan____> Does it say anything there
[07:26] <aizarry> checking
[07:26] <Dylan____> Ok
[07:27] <aizarry> only shows this "Using Processor microcode firmware for AMD CPUs from amd64-microcode
[07:27] <zamba> i'm running ubuntu 14.04 at my desktop.. what is the best way to get a seamless remote desktop integration from this system?
[07:27] <zamba> vnc is a bit laggy
[07:29] <Dylan____> Aizarry let me give u a link
[07:29] <aizarry> okay thank you
[07:30] <Dylan____> https://help.ubuntu.com/community/BinaryDriverHowto/AMD
[07:30] <Dylan____> Try and see if that works
[07:30] <Dylan____> If not try this
[07:30] <Dylan____> http://askubuntu.com/questions/624765/how-to-install-ati-radeon-graphic-drivers-on-ubuntu-14-04
[07:30] <aizarry> okay checcking it thanks
[07:31] <Dylan____> Thanks let me know if you need help ill try my best as i dont got smd
[07:31] <Dylan____> Amd
[07:31] <UniFreak> I'm on win7, have a fresh installation of ubuntu 15 in vbox, installed ultraVNC, now, how can I configure vbox and ubuntu so that I can vnc to the ubuntu's desktop?
[07:32] <myztic> anyone running deluge? (my problem is pretty deluge specific so sorry for the meta-question)
[07:36] <Dylan____> Unifreak your virtualbox has a ip
[07:36] <Dylan____> In your windows 7 command prompt type in
[07:36] <Dylan____> Ipconfig
[07:36] <Dylan____> And u should get a ip
[07:37] <Dylan____> Put that ip in the host i think should work
[07:37] <myztic> ipconfig/all
[07:37] <UniFreak> my win7 ip is 172.16.10.209
[07:37] <myztic> I remember that one.. haven't used windows in I don't know how long
[07:37] <Dylan____> No just ipconfig
[07:37] <Dylan____> Dont distrubte ip adress please
[07:38] <UniFreak> Dylan____: that's a lan ip
[07:38] <Dylan____> Yeah it might be a lan ip
[07:38] <Dylan____> But still you dont want people remotely connecting
[07:39] <Dylan____> If it doesnt work look on google
[07:39] <UniFreak> Dylan____: okay, say my win7 host is 1.2.3.4, my vbox ubuntu is 10.0.2.15(using nat)
[07:40] <Dylan____> Unifreak like i said
[07:40] <UniFreak> now how to configure?
[07:40] <Dylan____> What are you trying to do
[07:40] <Dylan____> Get your windows 7 host to display your virtualbox?
[07:40] <Dylan____> Or something
[07:40] <UniFreak> Dylan___: I'm tring to configure the virtual ubuntu, so I can use vnc on win7 host to login to it
[07:40] <Dylan____> Have you got the addons pack for gpvirtuslbox
[07:40] <Dylan____> No no no
[07:40] <Dylan____> You need addons pack for virtualbox
[07:41] <Dylan____> To use the remote connection
[07:41] <UniFreak> gpvirtuslbox? right?
[07:41] <Dylan____> https://www.virtualbox.org/manual/ch07.html look here
[07:41] <Dylan____> No that was my typing error sorry i type really fast
[07:42] <Dylan____> Besides this is a ubuntu irc not windows 7 just saying if you need support on windows 7 go to sevenfourms
[07:44] <jie_> hi
[07:44] <Dylan____> Hello
[07:44] <Dylan____> Do you need help jie?
[07:44] <Dylan____> Or something i can assist with
[07:44] <jie_> How to use irrsi
[07:44] <Dylan____> Irrsi
[07:44] <jie_> Yes.
[07:45] <jie_> I first use Irrsi.
[07:45] <Gallomimia> did you install it on ubuntu?
[07:45] <Dylan____> https://irssi.org/documentation/startup/
[07:45] <jie_> Yes.
[07:45] <Dylan____> Look at that
[07:45] <jie_> Thank you.
[07:45] <Dylan____> No problem
[07:46] <UniFreak> Dylan____: VRDP, but I'm talking about VNC
[07:46] <Dylan____> Vnc?
[07:46] <Gallomimia> lets you screenview
[07:46] <Dylan____> Vnc is a thing to play videos etc
[07:46] <Dylan____> Ikr
[07:46] <Dylan____> Or yeah
[07:46] <Dylan____> But vnc idk if it works with virtualbox
[07:47] <Dylan____> http://superuser.com/questions/322803/how-to-connect-to-virtualbox-remote-desktop-client-using-vnc
[07:47] <Dylan____> https://forums.virtualbox.org/viewtopic.php?f=6&t=15301
[07:47] <Gallomimia> there's also a video player called... wait, what is it?
[07:47] <Gallomimia> that one's VLC isn't it?
[07:50] <wafflejock> yah vlc is the video player vnc is for remote desktop basically
[07:51] <wafflejock> for virtual box if it has a GUI you can typically just show the running instances display in the settings for the virtual machine, typically don't need to VNC into it if it's running on the same machine
[07:52] <wafflejock> if it doesn't have a desktop environment installed you'd typically just SSH into the box (for instance if you use vagrant to create/provision the virtual machine you would run "vagrant ssh" to connect to the running VM)
[07:53] <wafflejock> UniFreak: you may need to change the VM settings in the network to use a "bridged adapter" so it gets an IP on the same LAN as your local computer instead of NAT where it will get some other IP scheme and will basically be routed through your local connection
[07:53] <Dylan____> Yeah
[07:54] <Dylan____> So anyone need help
[07:54] <Gallomimia> yep.
[07:54] <UniFreak> wafflejock: yeah. I think to view the remote desktop of the virtual ubuntu, I need, say like to start a vnc server in the ubuntu, then use vnc viewer on win7 host to connect
[07:54] <UniFreak> didn't thought there are configuration to do with vBox
[07:55] <wafflejock> UniFreak: if it's on the same machine you want to view it from there shouldn't be a need for it really should just be able to see the interface
[07:55] <wafflejock> UniFreak: I did a walk through video here and have a link to a write up on setting up Ubuntu in Virtual Box should be the same regardless of the host OS https://laracasts.com/discuss/channels/servers/php-7-and-laravel
[07:55] <wafflejock> oops wrong link
[07:55] <wafflejock> https://www.youtube.com/watch?v=zQNbsCTFrAA
[07:57] <wafflejock> UniFreak: I ran ubuntu in virtual box for a while on windows before making the switch, now I sometimes run windows in a VM for testing but in either case no need for remote desktop viewing since it's all on the same machine I'm developing on
[07:58] <UniFreak> I'll view your video off duty. thank you
[08:00] <Dylan____> I remember running windows xp and rdping through microsoft rdp app on the ipad
[08:00] <adeon_> People still do that...? they still do :-p
[08:00] <Dylan____> Haha
[08:00] <Dylan____> I got windows xp on my mac no bootcamp legit
[08:01] <Dylan____> And like installed broadcom driver online
[08:01] <adeon_> which mac?
[08:01] <Dylan____> Im trying to figure out if i should use my hp pavillion on my bed
[08:01] <Dylan____> 2010 macbook 7,1
[08:01] <adeon_> use a projector lol
[08:02] <Dylan____> Haha
[08:02] <UniFreak> Dylan____: I've done it last year, I remember
[08:02] <UniFreak> just for fun, no real need
[08:02] <adeon_> macs are nice, i hate the weight on the chest.. and heat
[08:02] <Dylan____> Ill use my old ipad box mount that on my hp and use it
[08:02] <Dylan____> Yeah i run my mac on ubuntu
[08:02] <Dylan____> Cause i reset the mac but relised i had to network install
[08:02] <Dylan____> And im like naw too long so i got ubuntu
[08:03] <adeon_> that is a nice feat on the macs
[08:03] <Dylan____> Then on my hp pavillion 15 i installed ubuntu only to relise my recovery drive would get removed
[08:03] <Dylan____> And my os would be deleted and gone
[08:03] <Dylan____> So then i had to download a so called or idk if its illgeal windows 10 iso from microsoft website
[08:03] <Dylan____> And use thst
[08:03] <adeon_> that only happens if you dont specify where you want it installed tho
[08:03] <Dylan____> My windows product key didnt activste
[08:04] <Dylan____> Well i had problems like it wanted to install on the boot loader but i didnt want to dualboot
[08:04] <adeon_> ehh. licensing software..
[08:04] <Dylan____> So im like whatever ill do it anyway and look what happened haha
[08:04] <Dylan____> Yeah
[08:04] <Dylan____> Idk if it was illegal
[08:04] <Dylan____> But i spoke with hp live chst
[08:04] <Dylan____> Chat
[08:04] <Dylan____> There like its illegal to download windows 10 iso!
[08:05] <adeon_> depends where you get it from
[08:05] <Dylan____> Im like surely it cant
[08:05] <Dylan____> Well i got it from offical microsoft website
[08:05] <Dylan____> And i made a bootable usb and recovery usb
[08:05] <adeon_> even then... really depends how you use it haha
[08:05] <Dylan____> Lol
[08:05] <Dylan____> I needed it as a operating system
[08:05] <Dylan____> Then again itunes doesnt work in ubuntu aah
[08:06] <Dylan____> And my ipod nano stuffed up the music in ubuntu and wouldnt play
[08:06] <adeon_> vm for that..
[08:06] <Dylan____> Yup
[08:06] <Dylan____> Indeed
[08:06] <Dylan____> I might consider doing thwt
[08:06] <adeon_> thats one thing i hate about having an apple device
[08:06] <Dylan____> But i cant boot from usb on virtualbox
[08:06] <Nimesh> hi,i am a gci new comer. :)
[08:06] <adeon_> you can
[08:06] <adeon_> He Nimesh
[08:06] <Dylan____> can you?
[08:06] <Dylan____> Never thought u could
[08:06] <adeon_> hey*
[08:06] <adeon_> ya
[08:07] <Dylan____> Wow
[08:07] <adeon_> just connect that USB device as soon as that machine boots
[08:07] <Dylan____> Im so stupid then haha
[08:07] <Dylan____> Ooh!
[08:07] <Dylan____> I got thawt windows xp iso
[08:07] <adeon_> get your fingers ready.. ctrl alt deltete mode lol
[08:07] <Dylan____> I can use thst and get itunes
[08:07] <Dylan____> Ding ding ding hha
[08:07] <tripelb> I have evince but it doesnt show up in the applications menu. How can I get it there? How can I get a list of any other programs in the same situation? (Kubuntu but I use gnome classic. I wanted to experiment with DEs but with gnome I dont think about it. I think about other things.)
[08:07] <Dylan____> Alright ill do that easy cake
[08:08] <tripelb> evince is a pdf reader
[08:08] <Gallomimia> oh. i should mention that i managed to install bootloader rEFInd on my mac. much easier to load any OS at the startup
[08:08] <tripelb> Okular is listed TWICEW in the menus.
[08:10] <Dylan____> Nice
[08:11] <Dylan____> I wish i had a mac boot disk haha
[08:11] <Dylan____> Stupid cant get mac anymore lol
[08:11] <Dylan____> I use my mac on my bed and it gets hot lol
[08:11] <wafflejock> tripelb: can download the package alacarte it's for modifying your menus with a GUI
[08:11] <Dylan____> And macs are poorly designed its all compacted together
[08:12] <wafflejock> tripelb: in general the icons are setup with .desktop files either in /usr/share/applications or in your home folder (forget the subdirectory off hand)
[08:12] <blipz> I can't say I share the same experience Dylan____
[08:12] <wafflejock> tripelb: the .desktop files are just text files that have info about what executable to run and what the icon is and what keywords to match it under (also mime type matching for when to use it as a default or optional for a file)
[08:13] <Dylan____> Haha
[08:13] <Dylan____> Would ubuntu be good primarily for a high school student?
[08:13] <Gallomimia> i think it would
[08:14] <tripelb> wafflejock, ok. why is it this way? when I went to install evince I was suprised to find it was already there. I searched and found it in /usr/bin/ but ls * | grep evince  produced no results. (sob)
[08:14] <Gallomimia> but it might depend on what that student wants
[08:14] <wafflejock> tripelb: can use, 'which evince' to see the path if it's a binary somewhere on your $PATH
[08:14] <Dylan____> Idk im in high school my self atm
[08:14] <tripelb> wafflejock, oh maybe I should have done grep with a -thing for subdirectories. Nevermind that part.
[08:14] <Dylan____> And next year for school were getting chromebooks etc
[08:14] <wafflejock> tripelb: most packages will install the .desktop files automatically might be some broken package though
[08:15] <Dylan____> But like i think next year were allowed to bring in laptops
[08:15] <Dylan____> So im pretty sure ubuntu could work out for me
[08:15] <tripelb> oh boy wafflejock that's a good hint about which.
[08:15] <Dylan____> Though some of the programs i might either have to vm on
[08:15] <wafflejock> tripelb: possibly the menu just didn't reload yet too, in Gnome can hit Alt+F2 then type R and hit enter and it'll reload Gnome and the menus
[08:15] <Gallomimia> Dylan____: find out if they have some requirements to share files. that could get a little complex
[08:16] <Gallomimia> Dylan____: i've also had plenty of luck making wine work on various things
[08:16] <Gallomimia> seems almost magical. some folks have put a lot of work into configs
[08:16] <tripelb> wafflejock, so the .desktop file is where things get listed in applications? where does the icon come from. [08:16] <Nimesh> when are you join for the gci
[08:17] <tripelb> wafflejock, I go to get wafflejock I nowsee where you told me about .desktop and the icons
[08:17] <wafflejock> tripelb: yup
[08:18] <Nimesh> What are you?
[08:18] <awshelp> hey guys hwo do i connect to ubuntu server from windows? putty?
[08:18] <Nimesh> hi tripelb
[08:18] <Mathisen> awshelp, yes that works
[08:18] <Dylan____> Ok
[08:18] <wafflejock> tripelb: cat /usr/share/applications/evince.desktop should show the one for evince
[08:18] <awshelp> Mathisen thanks
[08:19] <wafflejock> tripelb: says the icon is just "evince" forget where it looks for those by default though
[08:19] <Dylan____> I need ms office but i dont know where my cd is
[08:19] <Dylan____> All i go to get abadonware
[08:19] <Dylan____> And install through wine
[08:20] <wafflejock> Dylan____: can maybe get by with libreoffice too believe it supports all the new xml zip based formats like docx and pptx and whatnot (formatting probably isn't perfectly reflected though between word and libreoffice still)
[08:23] <Dylan____> Probably could
[08:23] <tripelb> wafflejock, which works. Alaacarte doesnt add evince when I try Add Item. I am now too tired (officially) and "must sleep". Thank you sir or madam.
[08:24] <wafflejock> tripelb: np g'night, I gotta get to bed too
[08:25] <alwan> if you need a "copycat" apps that resembles ms.office, go to wps office
[08:25] <alwan> https://www.wps.com/linux
[08:25] <alwan> it heavily mimics microsoft office interface
[08:26] <tripelb> alwan libreoffice >
[08:26] <tripelb> alwan libreoffice ??
[08:26] <alwan> no, it's wpsoffice
[08:27] <alwan> an independent office suite from china
[08:27] <alwan> it's great and free
[08:28] <Tarminquay> AC Wireless 3165 is supported by Ubuntu?
[08:28] <Tarminquay> Made by Intel.
[08:28] <Dylan____> Wpsoffice doesnt have .docx etc
[08:39] <lemocaky> hello everyone, my computer doesnt start some live CDs. for example, I can start liveCD on 14.04.2 but I cannot start the ones that I just created for 14.04.3. I tried with two discs.
[08:40] <lemocaky> there was also not a problem with the live cd of another distro
[08:41] <slidinghorn> lemocaky: I'm about to head to bed but what's the problem you're experiencing w/ the new one?
[08:41] <EriC^^> lemocaky: did you checksum the iso?
[08:41] <somsip> !md5 | lemocaky
[08:41] <slidinghorn> oh, good...y'all are up too...nevermind :)  good night
[08:41] <EriC^^> lemocaky: you can always install 14.04.2 , then once you upgrade as usual you'll have 14.04.3
[08:42] <lemocaky> EriC^^, somsip, yes, I verified it, and to make sure created two different CDs from two different iso downloads. both didnt start with this machine (with another machine, they did)
[08:42] <lemocaky> slidinghorn, I cannot get the livecd boot.
[08:43] <somsip> lemocaky: then, as EriC^^ says - take the line of least resistence and upgrade after installing
[08:44] <lemocaky> somsip, yes, I thought about that, too..but wondering just what the problem could be. because the disc boots on a second machine, and in turn, the first machine has no problem booting other live distros
[08:44] <somsip> lemocaky: and you might spend muuuuch longer finding out the why than going with the 'can'. Your call
[08:45] <lemocaky> somsip, sure..but just that it might be a minor issue to fix..
[08:47] <lemocaky> well ok. 'quit resistance' is the new solved..:DD..just joking
[08:50] <lemocaky> going for the upgrade solution. thank you all for your help!
[08:50] <lemocaky> ciao!
[08:55] <UniFreak> how to auto-run a command at system startup?
[08:55] <EriC^^> UniFreak: dash > startup apps
[08:55] <UniFreak> I'm following here: stucked at step 4
[08:56] <EriC^^> what's the command you're trying to add?
[08:56] <UniFreak> `x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5800`
[08:56] <UniFreak> EriC^^: ^
[08:57] <awshelp> how do i login to ubuntu server for the first time?
[08:57] <somsip> awshelp: are you on AWS?
[08:57] <awshelp> yes
[08:57] <somsip> awshelp: did you create an instance from the official ubuntu AMI?
[08:57] <awshelp> yes
[08:57] <EriC^^> UniFreak: ok, try dash > startup apps
[08:58] <awshelp> i am puttied in
[08:58] <somsip> awshelp: ssh -i /path/to/pem ubuntu@{public ip}
[08:58] <awshelp> its asking for a login
[08:58] <UniFreak> EriC^^: already tried, no result showed up
[08:58] <UniFreak> somehitng file I can put into ?
[08:58] <somsip> awshelp: no passwords are enabled by default - set puTTY up to use a pem, or I think you have to convert to a PPK for puTTY. Not sure
[08:59] <EriC^^> UniFreak: does the command work when you run it in a terminal?
[08:59] <awshelp> is there a better app somsip?
[08:59] <somsip> awshelp: are you on windows?
[08:59] <aizarry> drone i followed the instructions installing via command line when i install this sudo apt-get install fglrx-updates xvba-va-driver libva-glx1 libva-egl1 vainfo result is this sudo apt-get install fglrx-updates xvba-va-driver libva-glx1 libva-egl1 vainfo what should i do?
[08:59] <awshelp> yes
[08:59] <awshelp> somsip yes
[08:59] <somsip> awshelp: no idea then.
[09:00] <UniFreak> EriC^^: yes, it worked (I don't think this is related to my question)
[09:00] <awshelp> but is there a default login and pass for root
[09:00] <awshelp> on ubuntu server
[09:00] <somsip> awshelp: no
[09:00] <EriC^^> UniFreak: it's related
[09:00] <awshelp> i am ssh in for the first time
[09:00] <somsip> awshelp: the user on the official AMI is 'ubuntu'
[09:00] <awshelp> and pass?
[09:01] <somsip> awshelp: last time - THERE IS NO PASSWORD - use your private key - the PEM
[09:01] <awshelp> how?
[09:01] <EriC^^> UniFreak: you can put it in ~/.profile , it'll run when you login, but also when you enter a tty and no X
[09:01] <somsip> awshelp: told you already - enough now. Good luck
[09:01] <Mined> there is always google for further troubleshooting
[09:02] <EriC^^> UniFreak: try if [ ! -z $XDG_CURRENT_DESKTOP ]; then <your command here> ; fi
[09:02] <awshelp> > Topic is: Official Ubuntu Support Channel | IRC Guidelines: http://ubottu.com/y/gl | IRC info:http://ubottu.com/y/irc | Pastes to http://paste.ubuntu.com/ | Download: http://ubottu.com/y/dl | Currently supported: 12.04 LTS, 14.04 LTS, 15.04, 15.10
[09:02] <EriC^^> in ~/.profile at the bottom
[09:02] <awshelp> what i do with the pem
[09:03] <elisa87_> can you please have a look? paramiko a python ssh library gave me these errors in ssh ing to my slave VMs hey can you please take a look at this question? http://stackoverflow.com/questions/34351455/paramiko-channelfile-from-paramiko-channel-9-eof-received
[09:03] <Tarminquay> Will I be enjoying my Ubuntu experience (Kubuntu) with an N3150 processor?
[09:04] <somsip> elisa87_: try #python
[09:04] <UniFreak> EriC^^: thank you :)
[09:04] <EriC^^> UniFreak: no problem
[09:04] <awshelp> found it
[09:04] <awshelp> thx
[09:05] <somsip> elisa87_: thoguh a first step wopuld be to uncomment #key = get_private_key()
[09:05] <aizarry> got graphics card prblm anyone can help me?
[09:05] <aizarry> donno why i getting this error Package 'xvba-va-driver' has no installation candidate
[09:06] <aizarry> while i was installing this "sudo apt-get install fglrx xvba-va-driver libva-glx1 libva-egl1 vainfo
[09:06] <somsip> aizarry: what version of ubuntu?
[09:06] <aizarry> 15.10 :/
[09:06] <somsip> !15.10
[09:07] <somsip> aizarry: doesn't look like it's supported for 15.10 http://packages.ubuntu.com/search?keywords=xvba-va-driver
[09:07] <aizarry> now im confused how would i know if my ATI grpahic card is working :/
[09:08] <somsip> aizarry: follow a tutorial to install fglrx that works for wily?
[09:08] <aizarry> i was following this https://help.ubuntu.com/community/BinaryDriverHowto/AMD?action=show&redirect=BinaryDriverHowto%2FATI
[09:09] <aizarry> via command line it fails me :/
[09:09] <aizarry> is there another tutorial?
[09:09] <elisa87_> somsip: why is that a first step?
[09:10] <somsip> aizarry: I see references to broken AMD drivers/flgrx in wily. I'd suggest reading around them. Eg: http://theleftcoastgeek.net/index.php/2-uncategorised/8-fglrx-in-ubuntu-15-10-wily-werewolf-is-a-no-go https://www.phoronix.com/scan.php?page=news_item&px=Ubuntu-15.10-fglrx-Fix
[09:11] <aizarry> okay thank you
[09:11] <somsip> elisa87_: because if the script does not have a private key, it's not going to authenticate no matter what you do
[09:11] <somsip> aizarry: and one more http://askubuntu.com/questions/688747/ubuntu-15-10-release-fglrx-issue
[09:11] <daftykins> aizarry: what is your card?
[09:12] <aizarry> ATI radeon :(
[09:12] <daftykins> which _specific_ card? "lspci" to find the line
[09:13] <addiks> hi, is there a way to change the default system audo configurator to "pavucontrol"?
[09:13] <aizarry> where can i see that?
[09:13] <aizarry> im new sorry
[09:14] <alwan> No, if you're using ubuntu's unity desktop
[09:15] <Nilesh1810> how to change password in elementry os
[09:15] <somsip> !elementary | Nilesh1810
[09:15] <daftykins> Nilesh1810: 1) format 2) install ubuntu 3) ask again
[09:16] <Nilesh1810> enlight me about sea horse
[09:16] <daftykins> the males have babies? i'm not clear on the question.
[09:16] <somsip> daftykins: <snort>
[09:17] <bazhang> !info seahorse
[09:17] <Nilesh1810> thanx
[09:17] <bazhang> read the manpages.ubuntu.com first Nilesh1810
[09:17] <daftykins> then install ubuntu to get further support here
[09:17] <bazhang> Nilesh1810, if you are elementary we wont give any other support however
[09:18] <Nilesh1810> terminal code for thunderbird
[09:18] <daftykins> Nilesh1810: no.
[09:19] <daftykins> we just told you NO support.
[09:19] <bazhang> #elementary  <---- Nilesh1810
[09:19] <aizarry> daftykins: is there any way i can check if it is already installed ?
[09:20] <Nilesh1810> ok got it
[09:20] <aizarry> daftykins: about my graphics card?
[09:20] <Dylan____> How can i remove wps office
[09:20] <somsip> Dylan____: how did you install it?
[09:20] <Dylan____> .deb
[09:21] <somsip> Dylan____: man dpkg (you have to start learning how to find things out for yourself - you've been in this channel about 6 hours today asking questions like this...)
[09:22] <somsip> Dylan____: hint "/" will search in man, eg: "/remove"
[09:23] <aizarry> guys can i download this ? https://launchpad.net/ubuntu/+source/fglrx-installer/2:15.201-0ubuntu2~15.10.2
[09:23] <somsip> !info fglrx-installer | aizarry
[09:24] <aizarry> oh so i can't yet install my grphcs card? wew
[09:24] <somsip> aizarry: in wily-proposed - someone else will have to tell you what that means
[09:25] <aizarry> okay
 you could install fglrx easily in official ubuntu repo
[09:29] <alwan> sudo apt-get install fglrx
[09:30] <zzarr> hello! I had a big problem with the graphics cars driver
[09:30] <alwan> it's different package from the ppa
[09:30] <alwan> what graphic card <zzarr> ?
[09:31] <zzarr> Now I'm reinstalling Ubuntu (15.10) without it touching my files or applications, but it takes forever
[09:32] <zzarr> it's a "Gallium 0.4 on AMD TURKS (DRM 2.43.0, LLVM 3.6.2)"
[09:33] <daftykins> use "lspci" to identify it, that is not the name :)
[09:33] <zzarr> basically I installed the official fglrx driver and the monitor was black
[09:33] <zzarr> okey
[09:33] <awshelp> ok so i logged in to ubuntu server for the first time, is there some basic thigns i should do?
[09:33] <awshelp> like change password or something?
[09:33] <zzarr> "Radeon HD 6730M/6770M/7690M XT" is says
[09:34] <daftykins> ah, so mobile part in a laptop.
[09:34] <zzarr> in any way, I removed the AMD official driver and the desktop was back
[09:35] <aizarry> thanks daftykins
[09:35] <zzarr> but all of a sudden everything hanged except for the mouse cursor
[09:35] <zzarr> and after a reboot I could not get the graphics to work again
[09:36] <zzarr> is it normal for "/usr/lib/ubiquity/ubiquity/frontend/gtk_components/nmwidgets.py" to take hours to run?
[09:38] <cab12comp4> hey
[09:38] <cab12comp4> people
[09:40] <alwan> You must disconnect the internet when installing <zzarr>
[09:40] <alwan> it takes hours
[09:41] <zzarr> why must I disconnect internet?
[09:41] <aizarry> Found out i have ATI Radeon HD 4225/4250 and have read that ubuntu 12 up is not supporting it anymore is it correct?
[09:43] <daftykins> aizarry: yes that card has moved to legacy status so you can do nothing but make use of the default open-source driver 'radeon'
[09:44] <aizarry> damn i've been searching it for almost 2hrs and failed hehehe btw thanks guys, i will stick now on the default driver hehehe
[09:45] <daftykins> "doh"
[09:45] <cab12comp4> people
[09:45] <cab12comp4> hey
[09:46] <cab12comp4> i'm no visible ?
[09:46] <cab12comp4> sorry my bad engleash
[09:46] <aizarry> you're not
[09:46] <aizarry> lol
[09:48] <Mined> cab12comp4 don't worry, you exist as a nickname for us... are u human?
[09:48] <Mined> :)
[09:49] <cab12comp4> yes
[09:49] <cab12comp4> i m, people
[09:49] <cab12comp4> from russia
[09:49] <cab12comp4> Putin fucking turkey
[09:50] <tty00> hi all! i'm running trusty and trying to add a new repo with the command add-apt-repository, i got a trackback with the following text: "Must be one of %(ca_names)s") % subs)
[09:50] <tty00> how can i fix it?
[09:51] <n1cky> Are people really happy with the PPA model for bleeding edge / fringe software?
[09:53] <zzarr> can I install Ubuntu over an old broken installation without losing data if I select to not format the partition?
[09:53] <daftykins> n1cky: that's more of a discussion point which #ubuntu-discuss or #ubuntu-offtopic would be better fielding
[09:54] <daftykins> zzarr: what's broken of it?
[09:54] <Kartagis> I'm trying to install KVM using https://help.ubuntu.com/community/KVM/Installation but I get a lot of 404's,
[09:54] <zzarr> ubiquity crashed and now it don't recognize that it's Ubuntu no more
[09:55] <tty00> anyone have a clue why i get 'Must be one of %(ca_names)s") % subs)' when using add-apt-repository command?
[09:55] <daftykins> Kartagis: what does "cat /etc/issue" return?
[09:55] <zzarr> it's important that I don't lose any files inte the /home directory
[09:55] <daftykins> tty00: sounds like you're trying to enter a PPA expressed in the wrong format.
[09:55] <tty00> i'm running: add-apt-repository cloud-archive:liberty
[09:56] <Kartagis> daftykins: http://termbin.com/93pp
[09:56] <tty00> pasted from http://docs.openstack.org/liberty/install-guide-ubuntu/environment-packages.html :)
[09:56] <daftykins> Kartagis: and you're getting the 404s on what repo addresses?
[09:57] <Kartagis> daftykins: http://paste.debian.net/349814/
[09:57] <zzarr> so the question is, if I don't format I'm not loosing anything right?
[09:58] <daftykins> Kartagis: so change repo from tr.
[09:59] <daftykins> zzarr: backup.
[09:59] <zzarr> daftykins, so it does not help?
[09:59] <daftykins> you should have backups anyway.
[10:00] <zzarr> I have, but not a local
[10:00] <tty00> daftykins: what is the correct format of cloud-archive:liberty? :)
[10:00] <zzarr> so it would take time to get the data back
[10:00] <daftykins> tty00: i'm not familiar with that source and i'm not about to look it up for you i'm afraid, it should have docs
[10:00] <Mined> zzarr get a local backup :)
[10:01] <zzarr> but will the home folder be removed if I install without formating
[10:01] <zzarr> Mined, I don't have a disk for that
[10:01] <daftykins> time to buy one
[10:01] <Mined> zzarr always good to have a disk to do local backups on
[10:02] <zzarr> Mined, I know
[10:03] <Mined> without reading anything, a format will remove the data, a "do not format" does not remove it per say. If you install with the same username i think it will over-write the existing username-folder
[10:03] <Mined> zzarr if you know, why do you not have one? :)
[10:03] <tty00> daftykins: okay, i'll try with openstack channel and see if they have a clue
[10:03] <daftykins> it's per sé not 'say' :)
[10:03] <tty00> thanks for the help
[10:03] <daftykins> tty00: just look it up and get the info from the source...
[10:03] <Mined> daftykins WordMaffia is strong in this one
[10:04] <Tarminquay> Hello.
[10:04] <zzarr> Mined, it's not my computer
[10:04] <Tarminquay> Can I comfortably run Ubuntu with 8 GB of Ram and a 1-GHz Celeron processor?
[10:04] <lotuspsychje> Tarminquay: you already came here and ask that question
[10:05] <Tarminquay> Not the same question.
[10:05] <daftykins> time to stop trying to get your way when we say no.
[10:05] <Mined> Tarminquay try it out, doesn't take too long to get an answer
[10:05] <lotuspsychje> Tarminquay: you have been directed to the requierments page by bazhang that day
[10:05] <tty00> daftykins: but on the other hand, https://wiki.ubuntu.com/ServerTeam/CloudArchive tells you to run the command as well
[10:06] <Mined> and it depends on what level of comfort you demand.
[10:06] <Mined> but always good to read hardware requirements before you install anything, games and softwares alike
[10:09] <lbillywoodsii> can someone tell me how to fix this please? The keybinding you chose for "Pull Down Terminal" is invalid. Please choose another.
[10:10] <tty00> haha! i found the error in my preseed: d-i mirror/suite string precise
[10:10] <lbillywoodsii> can someone tell me how to fix this please? The keybinding you chose for "Pull Down Terminal" is invalid. Please choose another.
[10:10] <tty00> so, next time i will doublecheck my thick fat fingers ;)
[10:12] <Dylan____> Hello guys
[10:12] <Dylan____> I just installed playonlinux /wine and im trying to install ms office 2010
[10:12] <UniFreak> EriC^^: remember I added a command line into ~/.profile? now when tried to reboot, there is simply a black screen....
[10:13] <Dylan____> That i downloaded from the microsoft website i have product key still with me
[10:13] <zzarr> I'm making a backup now....
[10:13] <Dylan____> And when i go to install it says it cant install it has a problem
[10:13] <EriC^^> UniFreak: press ctrl+alt+f1
[10:14] <daftykins> Dylan____: there are a lot of things wrong with what you're trying to do, however may i point to #winehq for wine antics and also guides on how to get such things working with...
[10:14] <daftykins> !appdb
[10:15] <Dylan____> Yes it might be but how can i get ms office 2010
[10:15] <Dylan____> To work??
[10:15] <Dylan____> And this is not from cd its from a product key installation
[10:15] <daftykins> follow the above link, like i said.
[10:16] <daftykins> download a proper image i'd say, but still trying to run MS Office under Linux is so wrong
[10:16] <Dylan____> This isnt a image
[10:16] <Dylan____> Its a offical ms product i got
[10:16] <EriC^^> xD
[10:16] <EriC^^> well, in that case..
[10:16] <UniFreak> EriC^^: logged in, there are messages flush, seems related to display. but sadlly I can't copy them o.O
[10:17] <EriC^^> UniFreak: hmm, do you have another user you can log into?
[10:17] <EriC^^> that has sudo?
[10:17] <JlrVtLOwXmxSdQ> echoechoecho ELCALOR tonyyarusso rxc NoobSaibot Fleet topdownjimmy frank1e deviloper luckybunny Dynamit ulrichard chnyda ara ikonia nonopposition sjoshi win32 ujjain Pando xahn f|shy Guest51 OOPMan rypervenche joar barnito_ iNs_ dkessel ZeeNoodley traviscline jazzzu JeDa yokel pdominey qdii Cybertinus airtonix CacheMoney Nach0z chr0no DeMiNe0 Vivekananda Andreas33_ drew3x phinze PanicSkittle quenode Taci- caribou stonerl xcpop setkeh lblume pv2b
[10:17] <JlrVtLOwXmxSdQ> BigWinston anth0ny McLive topi` zz_`ar|elo` venkat_330 ircmaxell rwp cheapie CacheMoney Dinius baltun_ armyriad LoRez FameWolf root_ Nothing4You box enyc Wug ^cj^ matthewt MarioWaza copec VladGh Randy kalz babilen ProbablyAndy jpds ojdo redtooth echoechoecho shome2 phunyguy farid luckybunny phinze kvm2k yeticry KingPin thoht__ topdownjimmy barnito_ asbestos__ chiluk Thubo spinza ryan_4612 SebastianFlyte LoneWlf zoktar davidhrbaty protosoul elysium
[10:17] <JlrVtLOwXmxSdQ> btree yuriks elijah ssalenik noteness X-Rob frdmn verwilst SCHAAP137 AJ_Z0 PotatoGim Spec Arr0way mt physicz robairt stangeland acimob lord4163 Borg _ruben braderhart alain echoechoecho arooni_______ XDS2010 rotzbub MKCoin vila diytto xSke Jeepbeats beeblez DDR Chunkr Adran JH151 CptClever dwar avryn worg tvoss Hellosun_ cz2 thoht__ rbt- Fuchs abra0 TijG badbodh St1gma copec Randy Visual` blackwell
[10:17] <JlrVtLOwXmxSdQ> retoaded pcarrier ThePengwin w9qbj decrypt D-Boy KeithIMyers cz2 n0ah wildwork Chappie-san salami joar AnimalFarmPig githogori PlasmaStar DX099_ CraHan Borg wolflarson Boohbah simpleuser deviloper pinnen fabio__ SupaYoshi verwilst daum tripelb cruxeternus lu_tze yuriy_n17 odlD2 beeblez anto jtanner crane Daniel0 Thelks ssx icedp Arduino- Speed` cfedde claude2 msev- rwp stryx` Serowe darius93 saschpe echoechoecho Stanto SmOkE_RU venkat_330
[10:17] <JlrVtLOwXmxSdQ> traviscline stijndg ozzloy iceroot jamick pdrakeweb lulcat Opcode90 jelly Herb_Tarlek weezel_ metaKin aykut valeech dslevin Chappie-san slipperynick Vampire0_ xtr schoenemann darkdevil BlueSapphire iiddnn Pokinawa LibraryClaire jatt starkers rawagner Hellosun_ digilink Charlie79 vsuojanen g3kk3r Paradisee TSS amontalenti `ryban _Kai_ Vivekananda zz_`ar|elo` ZbikCapitansWife spinza yeticry Htbrdd NDPMacBook PaulCapestany cruxeternus Aristide Guest4
[10:17] <JlrVtLOwXmxSdQ> andyr Shoggoth ilken xtr luckybunny ayan phiwo Kevin` AxForest MeltedLux hateball _jareth_ vidplace7 kirkland lilstevie Loshki anth0ny Agent_Isai quenode Extreminador croppa Namikaze thenes ikonia Apachez frecel_ tapout Spilotro eipi-1 themill BedMan oneinch tinoco gregL bozonius jose Mony MrBiogene Andreas33_ Charlie79 retentiveboy whitenoise alphaseg nanoz wagle ColtonDRG BigWinston rymate1234 Shibe brollypop Guest68589 mynickname Muzer bewbs hx
[10:17] <JlrVtLOwXmxSdQ> pyrony_ GingerGeek OpenSorce teward utfans05 tekk avryn NegativeFlare SpacePenguin mICHAELjONES lordbachus ^peter^ Z750 Internet13 NickG365 Whiskey jfive quenau0 kforbz nano394 jayne malinator Loshki bittin farid funch Spleeze Drone` musicaestvita timchen119 Extreme- freakcom quenode yoavz L235 arleslie secmob lxdn00b HarryHallman Tuna-Fish ipxman Cybergeeek themill Miron DinCahill phiwo zzzgeoffb Red_M zonum Shoggoth rebelos Karunamon mehdi Codma
[10:18] <VhCnmIjrZDY> briansteffens rickardv_ rbanffy vlt BedMan qjkxkcd steven ssalenik AndroidHacker tekgeek deicer kermit Taci- tolecnal hellslinger labrador c0ncealed gbell mikul Cybergeeek camako bobey6 ineiros SpacePenguin DeMiNe0 Nukien Lakii Muzer echoechoecho ignis-fatuus schoewilliam axisys MyStuff ollo Katielyn rory badbodh truh_ darius93 binary01 sneakret1 lapion braderhart GingerGeek sphenxes01 charlytavu taehyub atrius` baltun_ massoo gringao caribou cewo
[10:18] <VhCnmIjrZDY> Rallias beisner Qrc^ ulkesh OliPicard igordcard_ BlackDex varazir alduin xtr ayan Wouter0100 quenau0 dduffey Kitt3n_ AJ_Z0 alchemistswl TMan459 obXiDeJSFQ_ FergusL krphop deicer ainTcent yonatankoren Bonn333 Zerant Linkandzelda droolendug hypermist JZTech101 the8thbit Guest87894 ssarah phinze SharkMa-san callumacrae hxm autto ulrichard ju5t qjkxkcd KewreL BLZbubba Technobliterator lonix Yaiyan elopio Dragnslcr xahn haz3lnut xamindar Steve_Jobs Sme
[10:18] <VhCnmIjrZDY> muh2000 CptClever Orphis LiENUS Blue1 Colti matt_ bgardner alphaseg Opcode90 aloril mgodzilla gavinguo darkdevil rich- ryan_4612 Vivekananda DerRaiden zenix` avdi ircuser-1 prsteele Hiz_ pavelz vigilvindex_ termos PCatinean githogori mosene ozzloy alexbligh1 utlemming Extreme- demonspork shakamunyi ineiros fabio__ bobo69[TB] He4dShOt lokulin bigolpete barnito_ Jazzy_J GJdan liutgnu arlen clopez rubber noteness saschpe inductiveload Jordan_U mgor O
[10:18] <VhCnmIjrZDY> varazir Ruiseart nerbellion NickG365 vdc Sedated tHEMtZ disson_ _Kai_ mrkirby153 sdx23 olli_ bob_ Loshki stijndg ilbelkitty wagle daynaskully bandroidx cfedde Shaun__ krphop ZbikCapitansWife blazeme8 mybit dhcpfreely m1dnight_ inteus yohnnyjoe labinnsw HashNuke ryclik He4dShOt Artemis3 shrilaxmi edwardly Aristide croppa Bonn333 DJones veyoon sipior Opcode90 victorp samuelkadolph gde33|2 codelion brollypop lotharn3 varikonniemi Uptime kingplusplus 
[10:18] <VhCnmIjrZDY> qjkxkcd Red_M penutgelo Steven__ t2be Htbrdd mino mini1 d3vlin clopez jtanner DavidFromBE DarwinSurvivor Shoggoth Wouter0100 ironGian1 benjamincrom karlthane wyggler2_ DEADB33F bkolden2 imReKT1000 cheapie zonetti arif-ali Globalirc MindSpark Callek dwar TheHodge Jazzy_J marko______ xnr asbestos__ Squishy mcphail kriskropd kk_drop Bhaal braderhart Xe rubber phoriwan arcsky vifino ^peter^ miroesq wolf_mozart dkessel cragdor_ cyboman33 ayan Timon_Cra
[10:18] <VhCnmIjrZDY> krux tirengarfio__ Jaddie axisys Tyrantelf Shaun__ qdii `ryban coolmadmax mandje APLU Thelks esteeb_ yohnnyjoe grantsmith ircmaxell zippoman confluence typ semajnz tsushi mahendra_ mavi baggar11 N3X15 Yaiyan zwamkat samfty darxun mgorbach yonatankoren vifino neunon ToAruShiroiNeko frobware DrWeissbrot malinator joar Ben64 FourDollars dduffey bradjones AxForest ukko rwp phschwartz drwx didierbelot akik Natrix Vbitz SmOkE_RU Serowe hellslinger Darte
[10:18] <VhCnmIjrZDY> K4k sandeepkr jonne PotatoGim distantorigin JustMe008 guampa SDr blSnoopy tanuki purplehaze seadog007 LoneWlf cyphix lokulin Netwolf kingplusplus allen_ sayakb Jguy troyready g3kk3r yotam zonetti Colti Sonderblade starsparrow davidhrbaty wolsen TREllis Bonn333 zwiep` nacc_ yena Guest34129 johtso___ plasticboy stux16777216Away setkeh gonyere__ h12o AJ_Z0 oblak ekarlso arooni_______ briansteffens FergusL Vivekananda n3rd riex woodruffw subz3r0 dunk 
[10:18] <EriC^^> UniFreak: did you add the line if [ ! -z $XDG.....] ?
[10:18] <Arr0way> wtf
[10:18] <pcarrier> thanks!
[10:18] <hypermist> N00B spam butts
[10:18] <hypermist> :D <3
[10:18] <daftykins> Dylan____: i know, i'm saying GET one. try to read with a little more attention, please.
[10:19] <UniFreak> EriC^^: I didn't see that ... I comment out the line added now it's normal, I'll try add the `if` line then try again
[10:19] <EriC^^> ok
[10:20] <mandje> VhCnmIjrZDY: you could be my love intrest.
[10:20] <MindSpark> I don't get it, what's the point in tagging everyone on the list?
[10:21] <DalekSec> Dylan____: Nobody can read you as unregistered users were quieted due to the above flooding.
[10:21] <daftykins> user left.
[10:22] <PanicSkittle> thanks Drone`
[10:22] <UniFreak> Eric^^: adding the if statement didn't prevent the black screen
[10:23] <Drone`> Welcome, PanicSkittle.
[10:31] <Apachez> Drone` Arr0way and hypermist: good morning :)
[10:32] <hypermist> o/ Apachez
[10:32] <hypermist> its not really morning its more like 11:32pm at night
[10:32] <hypermist> :p
[10:32] <ntz> hello
[10:32] <EriC^^> hello
[10:33] <ntz> can anybody please show me ``unamme -r'' from 14.04.03 ?
[10:33] <Apachez> unamme not found
[10:33] <EriC^^> !info linux-image-generic trusty
[10:33] <ntz> thanks
[10:33] <tekgeek> hypermist? you from NZ?
[10:34] <hypermist> yep tekgeek
[10:34] <tekgeek> I didn't know you were in this channel as well
[10:34] <Apachez> NZ are those who always cheat at new years eve and celebrates first?
[10:35] <hypermist> tekgeek, what channels are you in :P?
[10:35] <tekgeek> you were in doge I talked to you alot awhile ago
[10:36] <hypermist> aaaah
[10:36] <hypermist> yea i join and leave here
[10:36] <hypermist> :P
[10:37] <Nyterax> how do i lost permissions of every file in folder?
[10:37] <Nyterax> list*
[10:37] <daftykins> ntz: 14.04.3 can have the above 3.13.0-73 kernel or a 3.16 or a 3.19 depending on the HWE enabled :)
[10:40] <hypermist> SO HOW YOU BEEN tekgeek :p
[10:40] <hypermist> Whoops
[10:40] <hypermist> Capslock hit
[10:41] <tekgeek> busy I am usually not up this late.  its 4:40am right now
[10:41] <ntz> daftykins: what is please hwe
[10:41] <hypermist> Im up till atleast 5am everyday
[10:41] <hypermist> xD
[10:41] <hypermist> i am also busy tekgeek got neosstore.com to deal with
[10:41] <hypermist> xD
[10:41] <daftykins> !hwe
[10:41] <daftykins> hypermist: this is not a chat channel and you should know this by now.
[10:42] <hypermist> daftykins, well sorry it sort of just iniated :p
[10:42] <daftykins> hypermist: take it to #ubuntu-offtopic or PM
[10:44] <SubCool> how do you change owndership of an entire directory
[10:45] <daftykins> apply it recursively with chown -R ...
[10:45] <SubCool> THATs what i was missing
[10:45] <SubCool> ty
[10:49] <ntz> daftykins: perfect, thanks
[10:49] <Bassem> is there skype for ubuntu
[10:50] <SubCool> yeah, but its buggy
[10:50] <daftykins> due to Microsoft not having updated the Linux client in years
[10:50] <asad_> When is this going to be fixed? https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1293243
[10:53] <daftykins> when you're old and grey
[10:53] <krcevina> Is there a way I could determine is my writing to disk vi cache wrtie-back or write-through or is it application specific and not, so to say, system specific?
[10:54] <asad_> daftykins: is that for me?
[10:54] <daftykins> yes
[10:55] <asad_> daftykins: So you're saying the ubuntu team doesn't really care?
[10:55] <daftykins> i'm saying having a clue of when a bug will get fixed is about as useful as me asking you how long the piece of string my cat plays with, is
[10:56] <daftykins> s/useful/likely/
[10:57] <asad_> daftykins: But this bug was reported in 2014.
[10:57] <daftykins> you're the only one that i've seen sporting it :)
[10:58] <asad_> daftykins: If I was the only one, then the bug wouldn't be confirmed. Would it?
[10:58] <Bassem> where can i find my installed application
[10:58] <Bassem> i installed skype but can't find it
[10:59] <daftykins> asad_: in this channel i'm talking about, naturally.
[10:59] <daftykins> asad_: are you using proprietary graphics drivers? i forget.
[10:59] <asad_> daftykins: Nope. I'm on Intel.
[10:59] <daftykins> ah righty-o
[11:00] <asad_> daftykins: It's not a big deal to be honest. Just hope that it gets fixed soon. :)
[11:01] <asad_> daftykins: Also, the tearing only happens when scrolling in firefox. Not at any other time.
[11:01] <daftykins> ok, well await some new releases with new kernels and hold off on highlighting me further if you don't mind ;)
[11:02] <asad_> daftykins: I don't think it's a kernel issue. The bug's about compiz.
[11:03] <asad_> Anyways, have a nice day. Gotta get to work.
[11:03] <daftykins> "don't highlight me"... *insta-highlight*
[11:14] <thoht__> i installed xubuntu-desktop and now; the system don't run xfce or any x-manager; it just shows "fsck from util-linux 2.26.2 /dev/sda1 : clea" and that's aall. it hangs at this black screen forever. any idea how to fix that please?
[11:16] <daftykins> thoht__: once or every try?
[11:16] <daftykins> might want to fsck from a live session
[11:16] <thoht__> daftykins: everytime; it hangs there, i run a session with CTRL ALT F1 and there is no active fsck.
[11:17] <EriC^^> thoht__: pastebin /etc/fstab
[11:17] <EriC^^> and sudo blkid
[11:17] <daftykins> that's because "clean" is the result of it finishing
[11:17] <daftykins> ;)
[11:17] <thoht__> daftykins: i understand that but why doesn't it load xfce then ?
[11:18] <daftykins> likely due to a misconfiguration of a chosen greeter, anyway EriC^^ is helping you :) i must depart
[11:18] <thoht__> EriC^^: in fstab / has 0 and 1 at the end
[11:19] <EriC^^> thoht__: ok, pastebin the whole results
[11:20] <thoht__> EriC^^: the laptop don t have X session, i can t post anything on internet from it
[11:20] <thoht__> there is 2 line, 1 for / and one for swap
[11:20] <EriC^^> thoht__: type sudo apt-get install pastebinit
[11:20] <EriC^^> then pastebinit /etc/fstab
[11:21] <thoht__> EriC^^: /14087166/
[11:22] <thoht__> EriC^^: http://paste.ubuntu.com//14087166/
[11:22] <EriC^^> thoht__: sudo blkid | pastebinit
[11:22] <thoht__> EriC^^: http://paste.ubuntu.com//14087173/
[11:24] <EriC^^> thoht__: looks good
[11:25] <EriC^^> thoht__: try booting without quiet splash, put verbose
[11:27] <thoht__> EriC^^: rebootin
[11:27] <thoht__> EriC^^: can see all the step with OK
[11:28] <thoht__> EriC^^: it finished
[11:28] <thoht__> i got now a black screen with login prompt
[11:28] <EriC^^> tty1?
[11:28] <thoht__> EriC^^: tty1 to tty7
[11:29] <EriC^^> try logging in, type sudo service lightdm start
[11:29] <thoht__> it looks like there is not x manager
[11:29] <EriC^^> which de did you have before xubuntu?
[11:29] <thoht__> it was unity
[11:29] <EriC^^> ok
[11:29] <thoht__> now got a blackscreen
[11:30] <thoht__> disk is loading hardly
[11:30] <thoht__> ok here we go
[11:30] <thoht__> i can see the desktop now
[11:30] <thoht__> how to automatize ?
[11:30] <EriC^^> type cat /proc/cmdline
[11:30] <EriC^^> type pastebinit /proc/cmdline
[11:31] <thoht__> EriC^^: http://paste.ubuntu.com/14087204/
[11:32] <thoht__> EriC^^: previously; it was autologin to ubuntu without typing login/pass or anything
[11:32] <EriC^^> thoht__: try sudo apt-get install --reinstall lightdm
[11:33] <thoht__> EriC^^: done. rebooting now
[11:34] <thoht__> EriC^^: looks good
[11:35] <EriC^^> ok
[11:35] <thoht__> EriC^^: it is loading hardly like xfce starting
[11:35] <thoht__> EriC^^: thanks it works; i can now see the desktop appearing  !!!
[11:35] <EriC^^> thoht__: no problem
[11:44] <Li> Just an off topic question ..
[11:44] <Li> what is the best FREE hosting website to try putting php code on?
[11:44] <EriC^^> /join #ubuntu-offtopic
[11:46] <hexhaxtron> Anyone works for shop.canonical.com?
[11:55] <Kartagis> is there anything I can do about "Device drivers not found" error while installing Windows from .iso on KVM?
[12:03] <MoonUnit`> Kartagis, try the drivers iso https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.110-2/
[12:05] <Kartagis> MoonUnit`: how do I feed both at the same time?
[12:06] <MoonUnit`> Kartagis, by KVM do you mean a virtual machine or mouse/key sharing?
[12:06] <Kartagis> vm
[12:06] <Kartagis> MoonUnit`: ^
[12:07] <MoonUnit`> you should be able to add another drive to mount it or copy to usb flash then mount that.
[12:08] <MoonUnit`> i usually do it through virt-manager gui.
[12:13] <Myzqo> Im using ubuntu as ground for kodi, when i sign in to the computer the transmission-daemon starts. But it seems to use wrong settings i need to kill the process and start it again to use the right settings. ideas are welcome how to fix this.
[12:18] <BluesKaj> Howdy all
[12:23] <Kartagis> MoonUnit`: can you guide me step by step? I'm in advanced mode now
[12:23] <Kartagis> mounted the iso too
[12:24] <MoonUnit`> Kartagis, i'm a noob at it too.
[12:24] <Kartagis> I just need to know how I can point to it
[12:26] <amphiprions> Bonjour
[12:28] <kacla81> hallo
[12:36] <sruli> trying 15.10 i need to disable a startup service, until now i used service-name.override file in /etc/init, what would be the way to achieve this with systemd?
[12:37] <Mattias> I'm having the weirdest issue... Starting from a fresh Ubuntu 14.04.3 and trying to install mysql-server-5.6 The installation fails with: invoke-rc.d: initscript mysql, action "start" failed. And error.log: ERROR: 1062  Duplicate entry 'innodb' for key 'PRIMARY'   how did that happen? O.o
[12:42]  * Mattias has an idea. might be tight on memory
[12:43] <anabain> I can't get direct mounts on autofs: key ".directory" not found in map source(s).  Any ideas?
[12:53] <goranx> Hej i am goranx
[13:02] <GLOSS> http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 !!! EARN MONEY REALLY QUICK - FREE REGISTARTION - NO SCAM - REAL MONEY - ALL YOU NEED TO DO IS REGISTER FOR FREE AND SHARE YOUR LINK !! READ UP ON IT AND FIND OUT FOR YOURSELF !! HAVE
[13:02] <GLOSS> A BLESS DAY !!
[13:05] <sruli> TJ-: did you also test the pam issue on 15.10? i have a 15.10 now i can test it on
[13:09] <Guest43940> does ubuntu support miracast wireless display??
[13:09] <TJ-> sruli: yes, and Xenial. If there is an issue it was introduced a long time ago; the hard part is determining if it is a regression or bad documentation - no-one so far seems to be 100% sure (no evidence available)
[13:11] <Guest43940> so does anyone know?
[13:12] <hubbunny> hey should there be any disadvantage running a vpn on a ubuntu server VM vs full install?
[13:12] <hateball> Guest43940: https://github.com/albfan/miraclecast
[13:13] <GLOSS> http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 http://theyouthcash.com/?ref=22741 !!! EARN MONEY REALLY QUICK - FREE REGISTARTION - NO SCAM - REAL MONEY - ALL YOU NEED TO DO IS REGISTER FOR FREE AND SHARE YOUR LINK !! READ UP ON IT AND FIND OUT FOR YOURSELF !! HAVE
[13:13] <GLOSS> A BLESS DAY !!
[13:14] <BluesKaj> !ops | GLOSS
[13:15] <Guest43940> hateball that looks complicated
[13:15] <TJ-> Students!
[13:15] <Guest43940> maybe i'll just use windows to make life easier
[13:16] <k1l_> Guest43940: dont you need programs that support miracast? and not the OS?
[13:16]  * BluesKaj shrugs, threatening to back to windows won't help
[13:17] <john> john44
[13:17] <Guest52253> ok
[13:17] <Winning96> testing
[13:18] <Guest43940> k1l to setup miracast on ubuntu is complicated, on windows it is built in, automatic and easy
[13:20] <hateball> Guest43940: do you what you want. You asked  and I gave you an answer
[13:21] <Guest43940> user friendliness
[13:23] <bfig> exit
[13:23] <k1l_> Guest43940: i would argue with miracast about giving better linux support.
[13:24] <BluesKaj> Guest43940, all miracast does is replace the hdmi cable, it has no smarts
[13:25] <BluesKaj> and it ties up the device your using to wifi to the TV
[13:27] <dooopy> hey
[13:27] <BluesKaj> Guest43940, buy a roku
[13:33] <Guest43940> BluesKaj, yeah, i'm trying to connect a PC to a roku via miracast
[13:33] <BluesKaj> then you don't need miracast
[13:34] <ntz> hello
[13:34] <Macsurf> hello, I have problem with module rt73 I am trying compile this module for kernel but I have strange symlinks to build :/ and can`t do compile :(
[13:35] <ntz> how do I do in ubuntu ``init 3'' ? command passed, who -r shows runlevel 3 as current, but the xsession hasn't end
[13:40] <Guest43940> BluesKaj, what would you use to connect to roku instead or miracast
[13:40] <ntz> omg, this is so r********* distro :(
[13:41] <lotuspsychje> ntz: please focus on your issue
[13:41] <Elu_> Why?
[13:43] <lotuspsychje> Macsurf: wich ubuntu version are you on?
[13:43] <TJ-> ntz: Upstart and Systemd do not have a concept of runlevels, although they support the SysV init via legacy scripts and events
[13:43] <stangeland> Hi there. Is it possible to make a user which only have access to his home directory and nothing else?
[13:43] <dooopy> how should I edit /etc/resolv.conf? WHenever i'm editing it, it changes automatically...
[13:43] <lotuspsychje> !chmod | stangeland
[13:43] <dooopy> how to add one more DNS server to it?
[13:44] <stangeland> lotuspsychje, yes but do i then have to chmod every other directory than his home dir?
[13:44] <ntz> TJ-: in "normal" distros everywhere still systemd emulates init runlevels
[13:44] <cryptsting> what is this ffmpeg bullshit package
[13:44] <robotics> !gcc | robotics
[13:44] <cryptsting> nothing works
[13:44] <TJ-> ntz: "emulates" being the word, not "implements"
[13:44] <lotuspsychje> !language | CrypticSquared
[13:44] <cryptsting> presents not
[13:44] <cryptsting> scale not
[13:44] <ntz> so typing init 3 in fedora, suse, centos, debian results in what I wanted to do now in ubu
[13:45] <cryptsting> what is this fucking ubuntu crap package idiots doing
[13:45] <TJ-> !language | cryptsting
[13:45] <ntz> TJ-: my problem is, that here's something wrong with framebuffer and I do not see a grub menu and dev/ttyX console
[13:45] <cryptsting> fuck off ubuntu thats my language bitches!!!!!!!!!!!!!111
[13:46] <TJ-> ntz: Which Ubuntu release are you using?
[13:46] <Elu_> Anyone using ubu on MacBook white?
[13:46] <lotuspsychje> Elu_: ask your specific issue to the channel mate
[13:46] <ntz> TJ-: 14.04.02 LTS
[13:47] <TJ-> ntz: OK, so it's Upstart. Do you want to prevent the X session starting from the kernel command-line via the GRUB boot menu? if so, then add "text" to the command-line (that causes /etc/init/lightdm.conf to not start the X server)
[13:47] <ntz> TJ-: perfect, thanks !!!!
[13:48] <TJ-> ntz: if you're not seeing the GRUB boot menu either, then that points to some problem of the firmware or PC
[13:48] <ntz> yes, seems like
[13:48] <ntz> I don't even see the dev/tty1 console, if I hit enter during the boot, the flashing ubuntu disappears and the screen is black just same if I hit ctrl+shift+f1
[13:49] <lotuspsychje> stangeland: play a bit with chmod :p
[13:49] <TJ-> ntz: have you been able to test "nomodeset" on the kernel's command-line?
[13:49] <ntz> s/enter/esc/
[13:49] <ntz> TJ-: I'll add to grub.cfg for next reboot
[13:50] <ntz> TJ-: btw, nomodeset influences the framebuffer o.O ?
[13:51] <TJ-> ntz: it'll stop and KMS driver from getting involved
[13:51] <TJ-> s/and/any/
[13:51] <ntz> TJ-: also I'm going to use https://wiki.ubuntu.com/Kernel/LTSEnablementStack
[13:51] <ntz> so I'd like to suppose, that it will resolve these issues instantly
[13:51] <TJ-> ntz: if an FB driver is failing then I'd possibly suggest stopping GRUB from going into graphics mode
[13:53] <ntz> TJ-: to be honest I don't know ... cuz ``(cat /var/log/boot.log; dmesg) | egrep -i fail\|error'' shows nothing related to fb
[13:54] <ntz> TJ-: I checked /proc/cmdline and there's ``vt.handoff=7'' ....
[13:54] <TJ-> ntz: "GRUB_TERMINAL=console" in /etc/default/grub, followed by "update-grub", or make sure /boot/grub/grub.cfg has "terminal_input console" and "terminal_output console"
[13:54] <ntz> ok
[13:54] <TJ-> ntz: right; you can lose "vt.handoff" too
[13:55] <TJ-> ntz: with GRUB keeping the console in BIOS text mode that should stop any weird mode issues when the FB driver loads
[13:55] <ntz> TJ-: http://susepaste.org/view/raw/17610353
[13:56] <ntz> ^^ this doesn't look good, correct ?
[13:56] <ntz> btw, sorry for asking ..... I'm not ubuntu guy, I'm rpm distros guy but now have to do something with ubuntu (fixing the laptop of my boss - hahaha)
[13:56] <TJ-> ntz: that's going to put the output into graphical mode
[13:57] <ntz> ^^ to be honest I don't understand to this statement
[13:57] <ntz> does this cause, that dev/tty1 is dead/silent/black ?
[13:57] <me> hello
[13:57] <ntz> that I don't see grub menu ?
[13:57] <TJ-> ntz:  the shell scripts under /etc/grub.d/ are run by update-grub to build /boot/grub/grub.cfg. Those scripts use the env vars defined in /etc/default/grub to control their conditional code, for including/excluding code in grub.cfg
[13:58] <TJ-> ntz: Well, grub menu has nothing to do with /dev/tty1 (tty1 is only after kernel has loaded)
[13:58] <ntz> I understand to this part well, but I've never played specifically with these output related things
[13:58] <ntz> and I've never experienced, that dev/tty1 + grub menu is not visible
[13:59] <TJ-> ntz: if you hold down Shift key at boot to interrupt GRUB and have it show the boot menu, and see nothing, then there's something fundamental wrong with the PC's video output
[13:59] <ntz> fair, I have to check it
[14:00] <ntz> TJ-: so from your knowledge and understanding, holding a shift key might cause that I'll be able to see a dev/tty1 + grub menu ? even with ``terminal_output gfxterm'' as in http://susepaste.org/view/raw/17610353 ?
[14:04] <afidegnum> hello, is there a way to call a script from a system instead lf ./scriptname.sh ?
[14:04] <afidegnum> where I don't need to move to the location of the script?
[14:04] <ntz> afidegnum: sure, depends
[14:04] <ntz> afidegnum: under the root or regular user ? and when ?
[14:04] <pbx> afidegnum, type the full path to the script
[14:04] <afidegnum> regular user
[14:05] <ntz> and when ?
[14:06] <afidegnum> hmmm... is there a configuration to do in the system environment?
[14:06] <hateball> afidegnum: you can put for instance ~/bin in your path
[14:07] <hateball> if you have your scripts in ~/bin, that is
[14:07] <afidegnum> well it's a python script so I put a #!/home/afidegnum/gsam/bin/python on top of my script
[14:07] <TJ-> ntz: Shift is the GRUB interrupt key, tested for as soon as GRUB starts. If found, GRUB stops at the boot menu
[14:08] <pbx> afidegnum, and did you chmod +x the script?
[14:08] <afidegnum> and I did that
[14:08] <ntz> ok, thanks
[14:08] <hateball> hmmm, I see ~/bin is in path by default now
[14:08] <TJ-> ntz: what is the actual problem? The video output shows up during BIOS POST but then disappears, or there is no video output even from BIOS?
[14:08] <afidegnum> hateball: how do I add the file into Paht?
[14:08] <afidegnum> path
[14:10] <ntz> TJ-: may I please request on you one more thing, doing ``apt-get update'' just stops at certain point ... can you please check my repolist here, if it looks sane: http://fpaste.org/302732/14504478/raw/
[14:10] <anabain> Is it possible to share directories between two boxes and get e.g. plugged usb devices also recognized in the remote box?
[14:10] <TJ-> afidegnum: if PATH includes ~/bin and the script is in that directory, then it will work.
[14:11] <afidegnum> how do I output the current PATH values?
[14:11] <ntz> anabain: perhaps .... check mount --rbind
[14:11] <TJ-> ntz: that all looks fine
[14:11] <TJ-> afidegnum: "echo $PATH"
[14:11] <ntz> for example, I have persistent ```/var/run/media/dpecka   /home/dpecka/mnt/auto   none    rbind   0 0''' in my fstab for this reason
[14:12] <ntz> anabain: ^^
[14:13] <TJ-> ntz: has any of the file-systems run out of space, or inodes?
[14:13] <anabain> ntz, but that's the same box, right?
[14:13] <ntz> TJ-: no
[14:14] <ntz> TJ-: but good Q:, I'm just working on resizing the default VG (shrinking it) and move a user data out of it
[14:14] <TJ-> ntz: and networking (connectivity and DNS) are working OK as far as you can tell, on that system?
[14:14] <ntz> yes, seems like
[14:15] <chull> we spent serveral hours trying to fix my husband's top bar in ubuntu 14.04, and finally figured out that he had the wrong desktop. HOWEVER we replaced his cairo-dock and really he's got to start over, somehow. the icons aren't here and the desktop switcher. can someone help please?
[14:16] <ntz> anabain: if I export my /home via CIFS or NFS I'll have available a localy hot-plugged usb from remote via share also
[14:17] <ntz> TJ-: http://fpaste.org/302733/4482131/raw/
[14:17] <TJ-> chull: the quickest/smoothest way would be to create a new user account, ensure it works as you expect by default, then copy over the user's documents from the broken user home directory.
[14:17] <ntz> ^^ it's all wrong .... the result of ``apt-get upgrade''
[14:17] <TJ-> ntz: most obvious "gzip: stdout: No space left on device"
[14:18] <ntz> hmmm ..... yeah, gotcha ... full /boot
[14:18] <TJ-> ntz: does this system have a separate /boot/ ?
[14:18] <TJ-> ntz: aha! that'd do, because I bet the last initrd.img update truncated the file, giving a messed up/incomplete boot
[14:18] <chull> TJ-,  what he's got should be new, default. i don't know what else he needs or how he configured it before
[14:19] <ntz> TJ-: http://fpaste.org/302735/4483551/raw/
[14:19] <ntz> jfyi ^^
[14:19] <ntz> ok, removing old kernels
[14:20] <TJ-> chull: a user account contains a LOT of config files under $HOME/.config/ and several other directories, all of which can cause problems. By creating a new user account you can do 2 things: 1. ensure a clean profile works (if it doesn't there is some system-wide config issue, not per-profile) and 2. work from a known stable base (rather than there being some leftover issues not immediately evident)
[14:21] <RSpliet> In Ubuntu 14.04 I'm trying to install libopencv-dev
[14:21] <RSpliet> apt refuses to do so because of unmet dependencies that "are not going to be installed"
[14:22] <TJ-> ntz: generally after several kernel updates, especially with a separate /boot/, the use should run "apt-get autoremove" which will remove all packages no longer depended on by the 'linux-{image,headers}-generic' packages
[14:22] <RSpliet> now, I followed google in finding out why it refuses to install this package
[14:22] <RSpliet> which is not very helpful:
[14:22] <RSpliet> [rs855@alne src]$ aptitude why-not libopencv-dev
[14:22] <RSpliet> Unable to find a reason to remove libopencv-dev.
[14:24] <RSpliet> so question 1: why is aptitude wrongfully assuming that my intention is removal?
[14:26] <RSpliet> 2: why is apt-get pretending to be in it's puberty by giving me -> http://fpaste.org/302738/44873614/ ? What else can I do to debug this?
[14:27] <lotuspsychje> RSpliet: have you added ppa's of any kind?
[14:27] <ntz> TJ-: doing:  dpkg -l linux-* | awk '/^ii/{ print $2 }' | perl -ne 'print if m/0-(24|39|43|44|46|48|52|53)/' | xargs apt-get -y remove
[14:27] <afidegnum> TJ-: so each path is seperated by ":"  right?
[14:27] <k1l_> RSpliet: first run a "sudo apt update &&sudo apt full-upgrade"
[14:27] <codepython777> whats a good way to backup an online ubuntu box which is old ? rsync? I've multiple ones that i need to backup
[14:28] <TJ-> afidegnum: correct
[14:28] <RSpliet> lotuspsychje: not sure... I think there's the NVIDIA Cuda repository added to my apt list if that's what you'd like to know
[14:28] <k1l_> RSpliet: then do once again "sudo apt install libopencv-dev" and show both results in a pastebin please
[14:28] <afidegnum> so how do I add new path to the existing one?
[14:28] <RSpliet> k1l_: all that tries to do is install a 3.13 kernel that I don't want
[14:29] <k1l_> RSpliet: ?
[14:29] <TJ-> ntz: I generally simply do "apt-get remove linux-image-3.13.x-{a,b,c,d,e,f}-generic" (replacing x and a-f as appropriate)
[14:29] <anabain> About the private key, what's best, doing what it says here: https://help.ubuntu.com/community/Autofs#FUSE_based_file_systems  or generating another pair owned only by root?
[14:30] <Macsurf> hello, why i cant compile module for my wifi usb dongle, when I compile module I got this information: root@OrangePI:/home/orangepi/linux-3.4.39/drivers/net/wireless/rt2x00# make
[14:30] <Macsurf> make -C	/lib/modules/3.4.39/build M=/home/orangepi/linux-3.4.39/drivers/net/wireless/rt2x00 modules
[14:30] <Macsurf> make[1]: Entering directory '/lib/modules/3.4.39/build'
[14:30] <Macsurf> make[1]: *** No rule to make target 'modules'.  Stop.
[14:30] <Macsurf> make[1]: Leaving directory '/lib/modules/3.4.39/build'
[14:30] <Macsurf> Makefile:4: recipe for target 'all' failed
[14:30] <TJ-> afidegnum: if you're dealing with the ~/bin directory; a log-out/log-in will do it via .bashrc (the directory is added to the PATH if the directory exists at log-in). To add it manually now do "export PATH=$PATH:$HOME/bin"
[14:30] <RSpliet> k1l_: http://fpaste.org/302743/49020145/
[14:30] <lotuspsychje> Macsurf: wich ubuntu version?
[14:30] <k1l_> RSpliet: please pastebin it. and show a "uname -a" please. and why dont you want the kernel update?
[14:31] <max12345> hello, I recently updated to 15.10 but it seems like it broke my latex, the moderncv package to be exakt, please advise :)
[14:31] <guilherme> hi guys, im having a problem setting up a hotspot on my note. when i select wifi security i see just 2 options: wep 40/128 and wep 128 passphrase. why i dont see any "WPA & WPA2 Personal"?
[14:31] <RSpliet> k1l_: did I not paste what you wanted to know?
[14:31] <k1l_> RSpliet: ok. did you run apt update to get the latest package list?
[14:32] <RSpliet> ah ok, latency
[14:32] <RSpliet> but yes, I did
[14:32] <k1l_> RSpliet: so you installed "linux-generic-lts-vivid" right? to get the 3.19 kernel from thr enablement stack
[14:33] <TJ-> RSpliet: try "sudo apt-get install -o Debug::pkgProblemResolver=yes libopencv-dev"
[14:33] <k1l_> RSpliet: then you can remove "linux-generic" package if you dont want the original 3.13 kernel to be installed and updated
[14:33] <SchrodingersScat> max12345: your 'note'? is that a phone?
[14:33] <guilherme> note = notebook
[14:33] <RSpliet> k1l_: to the best of my knowledge I didn't
[14:34] <k1l_> RSpliet: if you installed a 14.04.3 iso it is enabled from the start.
[14:34] <k1l_> RSpliet: apt-cache policy linux-generic-lts-vivid will tell
[14:35] <RSpliet> k1l_: http://fpaste.org/302747/04493101/
[14:35] <k1l_> RSpliet: where did you get the 3.19 kernel from?
[14:35] <k1l_> mainline kernel?
[14:36] <SchrodingersScat> guilherme: oops, thanks for noticing my misdirection of that question.  Hmm, I also don't see this option.
[14:37] <RSpliet> k1l_: I think I just nicked the name from the ubuntu packages webpage and cluncked it into apt-get install... I reckon there's some linux-lts-vivid going on in the local repositories
[14:37] <k1l_> RSpliet: thing is: i think the not installed 3.13 kernel is blocking the package system. so if we sort that with the kernel we can have a go on the other issue
[14:37] <k1l_> RSpliet: so you want the 3.19 kernel stack and not the 3.13?
[14:38] <RSpliet> k1l_: yes that's correct
[14:38] <RSpliet> so you recommend me to remve the linux-generic package
[14:39] <k1l_> RSpliet: "sudo apt-get remove linux-generic" then "sudo apt-get autoremove". then "sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid "
[14:40] <RSpliet> k1l_: http://fpaste.org/302749/50449626/
[14:40] <RSpliet> probably because I have the "old" stack set-up
[14:44] <k1l_> hmmm, start with sudo apt-get install --install-recommends linux-generic-lts-vivid   for now
[14:44] <RSpliet> just did, that works, thanks
[14:45] <prabesh_> hello
[14:45] <k1l_> sudo apt update && sudo apt full-upgrade       again
[14:46] <TJ-> RSpliet: add in  "-o Debug::pkgProblemResolver=yes" to get more debug info
[14:47] <RSpliet> k1l_: no luck, going through the following process now:
[14:47] <RSpliet>  sudo apt-get install --install-recommends linux-headers-generic-lts-vivid linux-signed-generic-lts-vivid linux-signed-image-generic-lts-vivid
[14:47] <prabesh_> helo
[14:47] <prabesh_> sudo :
[14:49] <RSpliet> TJ-: sorry, yes, I acknowledge your feedback, thanks
[14:50] <RSpliet> just fixed the "kernel configuration issue", I appreciate that it was only halfway through correctly installed. That seems to be sorted now, but having no effect on the installation procedure of libopencv
[14:50] <k1l_> does it still say: held packages?
[14:52] <RSpliet> I'm afraid so
[14:52] <DirtyCajun> PXE boot environment needs dhcp server... can that be the dhcp built into most consumer routers or does there need to explicitly be a dhcp server
[14:53] <RSpliet> http://fpaste.org/302764/45045037/
[14:53] <TJ-> DirtyCajun: if the dhcp server on the router can be configured to provide the pxe response
[14:54] <Sudo> hello
[14:54] <Sudo> m new
[14:55] <Guest11128> hello
[14:58] <TJ-> RSpliet: it looks like you've got multi-arch support enabled, and some i386 packages are breaking things
[14:59] <zykotick9> k1l_: just curious, why ".. --install-recommeds" as that's apt's default behaviour?
[15:00] <TJ-> zykotick9: because we can't rely on the system not having had its config changed, and don't want surprises :)
[15:00] <max12345> hello the wily "texlive-latex-extra" contains a package but not one of it's requirements, what can I do?
[15:01] <ntz> TJ-: okay, I fixed boot, kernels + few other things .... how do I make sure please, that it boots to what I'd call a runlevel 3 after init 6 ? I removed temporarily whole /home/*
[15:01] <zykotick9> TJ-: fair enough...
[15:01] <ntz> otherwise it will attempt to auto-login
[15:02] <TJ-> ntz: generally forget runlevels. If you want a root boot, on command line add "single" or "recovery"
[15:02] <ntz> I only don't want that autologin to DE happens including starting X
[15:02] <TJ-> max12345: which dependency is missing?
[15:03] <max12345> TJ-, moderncv needs "fontawesome" but can't find it.
[15:03] <emx> i can remember a part of my password for my encrypted home. what now? :-/
[15:03] <TJ-> ntz: in which case just "text" on the kernel command line. If you want to disable that permanently then "echo manual | sudo tee -a /etc/init/lightdm.override"
[15:04] <yiptump> emx: what part of encryption don't you understand
[15:05] <RSpliet> TJ-: hmm, it looks like it. I'm afraid I can't just eliminate multiarch though (proprietary horrors like skype and modelsim)
[15:05] <yiptump> RSpliet: yes
[15:06] <TJ-> RSpliet: would making the install arch-specific help? "sudo apt-get -o Debug::pkgProblemResolver=yes install libopencv-dev:amd64"
[15:06] <RSpliet> TJ-: doesn't make a difference
[15:06] <anabain> When using sshfs + autofs, what's best, (client side) copying the user's key into .ssh's root dir (as stated here: https://help.ubuntu.com/community/Autofs#FUSE_based_file_systems), or generating a new pair from the root account and copying the public one to the remote machine?
[15:07] <TJ-> max12345: that font appears to be in texlive-fonts-extra
[15:07] <yiptump> anabain: auto
[15:07] <RSpliet> yiptump: mind your language please, I do not take kindly such judgemental private messages
[15:08] <RSpliet> TJ-: I'm afraid that doesn't make a difference
[15:08] <max12345> TJ-, yup and that's supposedly installed too but my tex editor still says it can't find it.
[15:08] <yiptump> max12345: install it
[15:08] <max12345> (the pdflatex command also complains about it so I doubt it's the editor)
[15:09] <max12345> yiptump, install what?
[15:09] <TJ-> max12345: can't help you with that
[15:09] <capoderra> hello, all. I've installed Ubuntu server and have no intention of adding a GUI, but I am unable to read everything on the left side because it is off the screen. HELP!
[15:10] <TJ-> max12345: the files appear to be at /usr/share/texlive/texmf-dist/tex/latex/fontawesome/
[15:10] <capoderra> How do I change the resolution to fit my tv?
[15:10] <emx> yiptump, i understand it too well. that's why i was thinking of bruteforce.
[15:11] <yiptump> RSpliet: understood
[15:11] <zykotick9> capoderra: you might want to try fbset
[15:12] <RSpliet> TJ-, k1l_: thanks, removing libsdl2-dev resolved the installation issues
[15:12] <emx> RSpliet, seems like yiptump has also spare time to not mind his language regarding me.
[15:12] <hounded> how do i add an external monitor by displayport
[15:13] <RSpliet> emx: yes... classic troll, not worth anyones time I think :-)
[15:13] <anabain> RSpliet, my share with yiptump:  why. you silly rotten bastard
[15:13] <RSpliet> (although operators might want to take note, in case he/she returns and starts harassing individuals again)
[15:13] <anabain> Sent by private message
[15:14] <Pici> Well, they're not online anymore, so theres not much we can do now.
[15:14] <capoderra> zykotick9, thanks, I'll check it out
[15:15] <emx> RSpliet, the world is full of unused human resources but still we can't staff the pending jobs... :P
[15:15] <max12345> TJ-, no there is no fontawesome folder at that path on my system... hm
[15:16] <RSpliet> emx: some human resources are better left unused :-P but tell me about it, the nouveau team is heavily understaffed
[15:17] <max12345> Installing that fontpackage you mentioned earlier...
[15:17] <capoderra> hi all, i made a copy of /etc/network/interfaces and then made some changes. Now I can't reach the internet, however, when I mv the copy over to the original, I still can't ping anything.
[15:17] <RSpliet> anyway, thanks for your help chaps, have a biscuit!
[15:18] <hounded> im having issues with ubuntu 14.04 + displayport monitor
[15:18] <capoderra> nevermind, network cable came out
[15:23] <hounded> w.e... going back to fedora
[15:23] <k1l_> hounded: good luck then.
[15:24] <max12345> TJ-, actually that package you metioned seems to have been the issue, thank you very much!
[15:26] <hounded> k1l_ no luck needed. selinux annoyance is nothing compared to ubuntu when its not working out of the box.
[15:27] <k1l_> hounded: your choice. might have been an easy fix but not with that informations-less issue description. no need to rant or blakcmail to leave ubuntu for another distribution.
[15:32] <hounded> k1l_ true. Venting it makes me feel better in the moment though ^^ I'm amazed how much of a timesink ubuntu config can be.
[15:34] <nicomachus> hounded: it would help if you stated what your exact issue is with displayport monitor
[15:37] <easyOnMe> hello everyone
[15:37] <easyOnMe> just want to ask how can I open a file with a .iso extension in ubuntu
[15:37] <ikonia> you mount it
[15:37] <ikonia> it's a file system image
[15:37] <zykotick9> !iso | easyOnMe
[15:38] <easyOnMe> ikonia: how do I mount it is there a special software I can download from the software center
[15:38] <easyOnMe> zykotick9: thanks
[15:38] <k1l_> easyOnMe: should be already included
[15:39] <k1l_> easyOnMe: right click on the file
[15:39] <nicomachus> easyOnMe: what is the .iso file and why are you trying to open it?
[15:39] <MonkeyDust> easyOnMe  you can use the 'mount' command in the terminal
[15:39] <easyOnMe> k1l_: ok I will do it now
[15:40] <easyOnMe> easyOnMe: I tried right clicking and it was opened by a software brasero and asking me for a CD
[15:40] <ntz> hmm http://susepaste.org/view/raw/74501026
[15:40] <easyOnMe> I do not have one right now
[15:40] <ntz> ^^ I guess I have to do it from live usb
[15:40] <ntz> i wants to umount /
[15:41] <easyOnMe> MonkeyDust: mount fileName
[15:41] <easyOnMe> is that the correct command on the terminal
[15:41] <hounded> nicomachus : that nothing happens when i plug it in. The solution: (1) figure out your DP identifier. (2) use some utility to spew out potential possible config options. (3) try to pup it into xrandr fingers crossed. (4) f... around with the config until it works. (5) save the settings. (6) never upgrade or touch anything cause it will f.. up your settings.. -> .. wtf. it was easier with slackware in 2005.
[15:41] <capoderra> zykotick9, I'm having a hard time trying to use fbset, but so far I've figured out that it's set to 1280x720, but my TV resolution is 1360x850.  I'm having a hard time because things are off the screen and I can't read. Can you give me a command to change the resolution please?
[15:42] <ikonia> hounded: enough now
[15:42] <MonkeyDust> easyOnMe  http://www.cyberciti.biz/faq/mount-drive-from-command-line-ubuntu-linux/
[15:42] <hounded> i expect a modern os to do this stuff automatically.
[15:42] <ikonia> hounded: look at the guidelines of using this channel, temper your language and attitude and give clear simple information if you want help
[15:42] <easyOnMe> MonkeyDust: thanks
[15:43] <ikonia> hounded: it "should" do, some devices have bugs, this is real life, we'd be happy to work them through if possible with you, if you control your attitude please
[15:43] <ikonia> !guidelines | hounded
[15:43] <g105b> Where are the gnome icons located that are used by default for Chrome's toolbar icons? http://i.stack.imgur.com/LZon5.png
[15:43] <hounded> ikonia : roger. excuse me. no worries i will leave now. the channel and the os.
[15:44] <ikonia> ok
[15:44] <zykotick9> capoderra: try "fbset -xres=1360 -yres=850"
[15:51] <capoderra> zykotick9, nope
[15:52] <nicomachus> g105b: I'm not sure you can get to them... but let me try to find them on my machine
[15:53] <capoderra> zykotick9, I even tried virtual resolution, didn't work
[15:55] <nicomachus> g105b: I'm not finding them. You may be able to get to them with a FOSS browser like Chromium or Firefox.
[15:55] <g105b> nicomachus: I'm looking in places like /usr/share/icons/gnome but none of them match...
[15:56] <nicomachus> g105b: if anything it'd probably be in ~/.config/google-chrome
[15:56] <g105b> there are a lot of icons in there, and they match that style, but I can't find the ones I'm looking for.
[15:56] <g105b> nicomachus: Oh I didn't think they were specifically google chrome? I thought they were part of the OS?
[15:56] <capoderra> zykotick9, it just lists the usage option for fbset when I enter the command
[15:56] <nicomachus> g105b: I'm honestly not entirely sure.
[15:56] <zykotick9> capoderra: "fbset -v | nc termbin.com 9999"
[15:57] <Guest98107> how do i change my name?
[15:57] <k1l_> /nick newnick
[15:57] <Guest98107> i used to know how to do this lol
[15:58] <scott_95> thanks
[15:58] <capoderra> zykotick9, ok i got something /termbin.comnw19
[15:58] <nicomachus> g105b: /usr/share/icons/ is going to be things like icon packs anyway, so they wouldn't be there.
[15:58] <Loopeth> I agree
[15:58] <Loopeth> oops sorry!
[16:00] <zykotick9> capoderra: it should have been a link, and manually trying your ..comnw19 gives a 404.  but i don't think the output would help, so don't worry about that.
[16:00] <ntz> TJ-: hmmm ... just found out, that if I boot to recovery session the dev/tty1 console works .... so it must be some param along the default kernel
[16:00] <hexhaxtron> Anyone works for shop.canonical.com?
[16:00] <capoderra>  /termbin.com/nw19
[16:00] <nicomachus> hexhaxtron: everyone here is volunteers, not canonical employees. :)
[16:01] <MonkeyDust> hexhaxtron  #ubuntu-offtopic
[16:01] <TJ-> g105b: is "ls -l /usr/share/icons/hicolor/*/apps/chromium*" any use?
[16:01] <capoderra> zykotick9, there should have been a forward slash after com
[16:01] <TJ-> hexhaxtron: if it is a web-site issue try #canonical-sysadmin
[16:02] <zykotick9> capoderra: ok so you're current resolution is 1280x768.  try "fbset -xres=1024 -yres=768" then run "fbset -v" and verify it reports that 1024x768 resolution.
[16:02] <capoderra> zykotick9, ok
[16:03] <k1l_> hexhaxtron: click on the "contact" down at the bottom of the page
[16:04] <capoderra> http://termbin.com/sjir
[16:04] <zykotick9> capoderra: no change :(
[16:05] <capoderra> zykotick9, as you can see, it's not doing anything. it just kicks back usage options for fbset
[16:05] <capoderra> zykotick9, i think the command is wrong
[16:05] <zykotick9> capoderra: what graphics card are you using?  "lspci | grep -i vga" if you aren't sure.
[16:06] <capoderra> intel integrated graphics
[16:06] <capoderra> zykotick9, 5500
[16:06] <g105b> TJ-: I can see there are a few chrome related things in the hicolor directory, and they are all the same visual style as the ones I'm looking for...
[16:06] <zykotick9> capoderra: "i think the command is wrong" <- are you getting the _usage_ when you run "fbset -xres=1024 -yres=768"?
[16:06] <capoderra> zykotick9, correct
[16:07] <TJ-> g105b: maybe "apt-file -F list chromium-browser" will help?
[16:08] <g105b> apt-file is new to me
[16:08] <TJ-> g105b: if the package is installed then "dpkg -L chromium-browser"
[16:09] <nicomachus> TJ-: he has Chrome, not Chromium
[16:09] <zykotick9> capoderra: that certainly indicates a problem then.  what does "apt-cache policy fbset" report the Installed: version as?
[16:09] <TJ-> nicomachus: g105b OK, so use the correct package name then :)
[16:09] <g105b> TJ-: you see I think the icons I'm looking for are part of the OS and were there before chrome was installed
[16:10] <nicomachus> g105b: that'll be 'google-chrome-stable' :)
[16:10] <easyOnMe> nicomachus: it is a video tutorial that was downloaded from youtube
[16:10] <easyOnMe> easyOnMe: right now I am trying to use the terminal to mount it so that I can watch all the videos
[16:10] <easyOnMe> can you help me with the terminal commands
[16:11] <easyOnMe> the file is inside my Downloads directory
[16:11] <nicomachus> easyOnMe: a video tutorial is an .iso file....?
[16:11] <g105b> what does dpkg -L show? are these all the files/folders that have been altered by the package?
[16:11] <capoderra> zykotick9, http://termbin.com/v1lx
[16:11] <easyOnMe> nicomachus: my friend burn it into an iso file
[16:11] <easyOnMe> nicomachus: the file is quite big
[16:12] <easyOnMe> so it was burn into an iso file
[16:12] <easyOnMe> can you help me with the terminal commands
[16:12] <easyOnMe> I am looking at my terminal right now and a bit clueless
[16:12] <nicomachus> easyOnMe: hmmm... odd choice, but ok. 'cd ~/Downloads/thefilename.iso'
[16:12] <easyOnMe> as I am given a lot of options and I could not figure out which ones to choose
[16:12] <k1l_> easyOnMe: what ubuntu is that exactly?
[16:12] <zykotick9> capoderra: that's "basically" the same version i have? 2.1-28 here, i doubt the -27 vs -28 would change much?
[16:12] <easyOnMe> k1l_: ubuntu 14.04 LTS
[16:13] <nicomachus> easyOnMe: sorry, brain fart. 'cd ~/Downloads'
[16:13] <nicomachus> easyOnMe: then 'mount filename.iso'
[16:13] <k1l_> easyOnMe: if you right click on the .iso file, it should offer something like "mount with ..:" as an option
[16:13] <TJ-> g105b: the 'back' 'forward' 'refresh' 'home' icons?
[16:14] <easyOnMe> nicomachus: thanks I got it
[16:14] <easyOnMe> k1l_: yeah you are right thanks so much
[16:14] <g105b> TJ-: yeah, by default the chrome icons are solid black, but choosing "Use GTK+ theme" from the settings uses these funny looking colourful icons
[16:15] <TJ-> g105b: ahhh I see what you mean, the application is using the theme icons
[16:15] <nicomachus> oh that's much easier then.
[16:16] <nicomachus> g105b: check in /usr/share/themes/yourGTK+themename/gtk-3.0/assets
[16:16] <zykotick9> capoderra: i'm sorry, but i'm out of ideas/suggestions.  you might want to try #ubuntu-server perhaps (if no one else has anything to suggest here).  sorry again, best of luck.
[16:16] <g105b> TJ-: nicomachus: Ah I found them, I wasn't expecting them to be in /usr/share/icons/Humanity
[16:16] <g105b> Is Humanity a standard icon package?
[16:17] <capoderra> zykotick9, thank you for trying
[16:18] <TJ-> g105b: try "ls -l /usr/share/themes/*/gtk*/"
[16:24] <DerRidda> Hello everybody. I just got myself a server where the provider apparently thought it would be a great idea to not include the keys to verify packages, what's the idiomatic way to reacquire them? (It's a 14.04 64 bit server)
[16:25] <TJ-> !info ubuntu-keyring | DerRidda
[16:26] <lamarck> hallo
[16:27] <DerRidda> Thanks TJ-.
[16:45] <Dsbeerf> Hello someone can help me ? im trying to reinstall a remote ubuntu server with grub and iso i set a 40_custom in /etc/grub.d http://pastebin.com/gRtfqzJs like the docs said but when the machine is booting and i chose this option it say kernel not found any one have an idea ?
[16:47] <hubbunny> hey guys, trying to install ubuntu server onto my old hp microserver. When I get to language selection the usb keyboard stops working, Anyone experienced this before?
[16:50] <slidinghorn> hubbunny: try unplugging the keyboard and plugging it back into a different port (USB, I assume?)
[16:51] <slidinghorn> hubbunny: ^^  ....when the keyboard stops responding, do that.
[16:51] <hubbunny> slidinghorn, yeah I've tried that with a few different ports no joy
[16:52] <slidinghorn> hubbunny: what version are you attempting to install?
[16:53] <hubbunny> slidinghorn, 14.04.3
[16:53] <hubbunny> slidinghorn, the machine is from 2011 I believe
[16:53] <TJ-> hubbunny: In the PC BIOS enable "USB Legacy support"
[16:54] <hubbunny> TJ Ah good shout let me try that
[16:54] <TJ-> hubbunny: if that's already done, you could have a system with a rare USB HID controller that isn't included in the initrd.img drivers
[16:55] <hubbunny> TJ the keyboard works fine with my windows home server 2011 OS I'm trying to install ubuntu on a separate partition and it stops working after selecting install on boot
[16:55] <hubbunny> TJ let me check the bios however
[16:57] <zamba> ubuntu refuses to boot
[16:58] <nicomachus> zamba: gonna have to be more specific. Ubuntu version? Error messages?
[16:58] <zamba> it's stuck on "Starting SMB/CIFS File and Active Directory Server [fail]"
[16:58] <zamba> doesn't respond to any input either
[16:59] <nicomachus> zamba: reboot and go to GRUB, then drop to a root shell
[16:59] <zamba> nicomachus: how?
[16:59] <nicomachus> zamba: reboot and when you get to the GRUB screen, go to Recovery options
[17:00] <zamba> nicomachus: you mean "Advanced options for Ubuntu"?
[17:00] <nicomachus> zamba: yes
[17:00] <nicomachus> zamba: then select "recovery mode" for your latest kernel and then "root"
[17:01] <zamba> nicomachus: what am i looking for?
[17:02] <nicomachus> do you have a root shell? should basically give you a command line interface
[17:02] <zamba> nicomachus: yup
[17:02] <nicomachus> ok. 'mount -o rw,remount /
[17:03] <nicomachus> zamba: then after 'mount -o rw,remount /' do 'echo manual > /etc/init/samba-ad-dc.override
[17:03] <ciss> hi, i'm getting "chattr: Operation not permitted while setting flags on ..." - is chattr a root-only operation, or can i grant normal users the ability change extended attributes (immutable in this case)?
[17:03] <nicomachus> zamba: then 'exit' and try to boot again
[17:03] <ciss> the user with which i'm trying to run chattr is the file owner
[17:04] <ciss> also, i've removed the immutable flag via sudo, but i'm still not able to set it again with the unprivileged user
[17:05] <ciss> ah, nvm. just found an article referencing root and CAP_LINUX_IMMUTABLE.
[17:05] <upmauro> I need help. I using OpenVPN with network manager, but when i start VPN my internet not work.
[17:07] <systemd0wn> upmauro: Do you have network connectivity to anything on your VPN? What kind of VPN server are you connecting to, work, anonymity?
[17:07] <TJ-> upmauro: that sounds like the VPN server is providing a new default gateway, which replaces the local default route., but that gateway isn't routing the traffic
[17:08] <systemd0wn> DNS Question: How does DNS resolution work in ubuntu? I requested a new domain, first query was what I'd expect. my eth0 IP --> Public DNS Server.
[17:08] <upmauro> systemd0wn, hello! yes, my vpn work, but my internet not. I using open vpn, just to connecton mysql in my server without open external ports there.
[17:08] <ikonia> systemd0wn: what's the question ?
[17:08] <ikonia> systemd0wn: what you said doesn't make sense
[17:08] <systemd0wn> upmauro: ya, it sounds like the the vpn isn't routing anything but their internal network.
[17:09] <upmauro> TJ-, maybe, when i check in network manager "use this connection just for this network", i connect in vpn, my internet works, but i can't ping ips there
[17:09] <systemd0wn> ikonia: But the next query goes from 127.0.0.1 --> 127.0.0.1 and gets a response.
[17:09] <systemd0wn> upmauro: yes. do that.
[17:09] <ikonia> systemd0wn: it uses dnasmasq
[17:09] <upmauro> systemd0wn, maybe i can try route manual, but, let me show to you
[17:09] <TJ-> upmauro: you need to prevent the VPN's default route being applied locally - you can edit the connection settings to do that
[17:09] <ikonia> which is what you're seeing on 127.0.0.1
[17:09] <zamba> nicomachus: "Starting configure virtual network devices [OK]" and then stuck again
[17:10] <TJ-> upmauro: then maybe the remote gateway isn't allowing ICMP. Can you connect the the mysql server?
[17:10] <systemd0wn> ikonia: ah ok. Thank you. I'll have to go read about that. Is that supposed to be a local cache or something?
[17:11] <upmauro> TJ-, yes, without success .. and icmp works when i uncheck "use this connection just for this network"
[17:11] <nicomachus> zamba: stuck on the boot, or in the root shell still?
[17:11] <TJ-> systemd0wn: Ubuntu/Network Manager operates a private instance of dnsmasq which is given the upstream nameservers, and local resolvconf uses the private dnsmasq on 127.0.1.1
[17:11] <zamba> nicomachus: on the boot
[17:11] <systemd0wn> TJ-: well it's strange because after doing some benchmarking all requests (even chached) are slower to 127.0.0.1 than the public DNS I use.
[17:12] <TJ-> upmauro: ensure the sub-net you're trying to reach is the same as the sub-net used for the VPM point-to-point link, else you'll need additional local routes. Sounds to me like the VPN server needs to be configured to pass that route down, but not pass a gateway
[17:12] <upmauro> TJ-, systemd0wn http://i.imgur.com/B2Oow36.png
[17:12] <TJ-> systemd0wn: IPv6 timeouts maybe?
[17:13] <TJ-> systemd0wn: if you do "dig -t A hostname" is it faster?
[17:14] <upmauro> On my local machine .. my eth0 is 179.104.179.48 my tun0 is 10.8.0.6 ... In my server eth0 is 172.31.0.10 and tun0 is 10.8.0.1
[17:15] <TJ-> upmauro: right so you'd want something locally like "ip route add 172.31.0.10/32 via 10.8.0.1 dev tun0"
[17:17] <systemd0wn> TJ-: Just went back and looked. It's even faster with A records.
[17:17] <TJ-> upmauro: there also may need to be the mirror route on the server to e.g. "ip route add 179.104.179.48/32 via 10.8.0.6 dev XXXX" (replace XXXX)
[17:17] <upmauro> TJ-, so, on network manager, in routes, address is 172.31.0.10 and gateway is 10.8.0.1 ?
[17:18] <TJ-> systemd0wn: it sounds like an issue between the local dnsmasq and the remote public DNS servers. Check /var/log/syslog to check which nameservers dhclient got from DHCP and network manager sent to dnsmasq over the DBus
[17:18] <TJ-> upmauro: before altering the connection configuration I'd recommend experimenting with commands in a shell. Once you've got it working *then* change the configs
[17:19] <upmauro> TJ-, ok, thanks!
[17:19] <simone_> ciao
[17:20] <myztic> zykotick9: ty btw for termbin (just now got around to try it), nice and simple solution :)
[17:21] <dom__> hello
[17:22] <zykotick9> myztic: i certainly like it ;)
[17:23] <systemd0wn> TJ-: I see that dnsmasq got all the correct name servers. dnsmasq is able to resolve queries it's just slower than queries that go directly to public name servers. Dig only sends queries to dnsmasq but it appears Chrome duplicates queries to the first NS in my list and dnsmasq.
[17:26] <TJ-> systemd0wn: hmmm, might be worth running tcpdump on udp port 53 and check what dmsmasq is doing/asking for
[17:26] <systemd0wn> TJ-: I did.
[17:26] <systemd0wn> TJ-: there are no errors at all.
[17:29] <nllrte> anyone have any insight on why lxc-create for an unprivileged container on trusty appears to fail on fetching a gpg key?
[17:29] <nllrte> i've seen this: https://askubuntu.com/questions/544597/lxc-create-hangs-and-finally-fails but the behavior isn't the same for me nor am i behind a proxy
[17:29] <upmauro> TJ-, are you here?
[17:31] <systemd0wn> TJ-: I just went and commented out dnmasq, thanks. ikonia too.
[17:36] <zamba> seems like there's a deadlock when booting ubuntu
[17:37] <zamba> "i'm getting lots of Starting Block the mounting event for NFS4 filesystems until idmapd is ... "
[17:37] <zamba> first starting then stopping
[17:39] <J-guts> how
[17:40] <J-guts> does anyone knows how to run a mysql on linux mint
[17:40] <slidinghorn> !mint | J-guts
[17:42] <asad_> Hi. I'm having this problem: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1293243
[17:43] <asad_> I have enabled "force full screen redraws (buffer swap) on repaint"  as mentioned in the bug report. This seems to have fixed it. Does this have any negative effects?
[17:43] <nicomachus> zamba: yea you're getting a lot of different boot errors there... what happened to this machine before it was turned off? new kernel update, release upgrade, anything?
[17:44] <zamba> nicomachus: it was shut down
[17:44] <zamba> nicomachus: forcefully
[17:47] <asad_> Anyone?
[17:48] <slidinghorn> asad_: Without knowing much about Compiz, personally, I'd imagine that would possibly increase your graphical resource usage, but I don't see any issues...btw, sometimes it takes a while to get a response here - just try to be patient and if you don't get an answer after 20 or so minutes, go ahead and ask again (on one line if possible) :)
[17:49] <asad_> slidinghorn: What does enabling this basically do?
[17:50] <slidinghorn> asad_: I'm assuming what it does is makes Compiz "redraw" the screen every time there's a change in the display.  Again, I'm not very familiar with it, though.  I could very well be wrong.
[17:53] <josharenson> I have an SD card w/ and ubuntu installation on it containing an encrypted home directory. I'm trying to mount it on my local machine by following https://askubuntu.com/questions/238047/how-do-i-mount-an-encrypted-home-directory-on-another-ubuntu-machine but it isn't working. Some clarification on the SO article might be helpful. The SD card is from an armel installation and I'm trying to mount it on an x86-64 system if that matters..
[17:58] <slidinghorn> josharenson: where in that answer are you running into trouble?  What error(s) are you getting?
[18:04] <nicomachus> zamba: forcefully....?
[18:04] <asad_> slidinghorn: In compiz settings, when you hover over this workaround, it says "use with care, it will cause a massive increase in CPU and GPU usage" So will it be harmful for my laptop? It does fix the problem I'm having...
[18:06] <josharenson> slidinghorn: The directory was mounting, and the names of subdirectories were showing up, but nothing was accessable.. I just got it working w/ ecryptfs-recover-private though :-)
[18:07] <slidinghorn> asad_: Shouldn't do any harm.  Just will take up more resources
[18:07] <slidinghorn> josharenson: good, glad to hear you got it working
[18:13] <Ghost_r00t> how could I find a list of installed packages?
[18:13] <slidinghorn> Ghost_r00t: dpkg -l
[18:14] <slidinghorn> Ghost_r00t: although you'd be well served to pipe that into grep to search for particular packages
[18:15] <slidinghorn> Ghost_r00t: I'm sorry, I was wrong...it's dpkg --getselections
[18:15] <slidinghorn> --get-selections *   good lord...can't type today
[18:17]  * nicomachus slides slidinghorn a fresh cup of coffee
[18:17]  * slidinghorn tips hat
[18:24] <frecel>  is ca.archive.ubuntu.com down?
[18:25] <k1l_> frecel: works here
[18:25] <teward> frecel: works here, if you're having issues with mirrors, it may be temporary
[18:25] <frecel> I've had trouble with it since last night
[18:31] <nicomachus> frecel: what version of ubuntu are you running?
[18:31] <frecel> nicomachus: 15.10
[18:31] <nicomachus> well you definitely aren't EOL then. :)
[18:36] <doebi> my terminal does not support unicode. ubuntu has f*ck'd up locales. running local-gen would generate ALL available ones. i dont need those bytes wasted, i just want my preferred en_US UTF-8 installed and configured, nothing else.
[18:38] <nicomachus> doebi: language...
[18:39] <slidinghorn> doebi: which locale(s) do you actually want?
[18:41] <doebi> exactly what is set in my env vars: http://files.doebi.at/temp/nx1tn6oG/
[18:44] <slidinghorn> doebi: you can just locale-gen individual locales:     locale-gen en_US.UTF-8
[18:46] <doebi> now i already got ALL of them installed. but why the heck?
[18:46] <amigo1969> hola
[18:47] <Macsurf> hello, how install linux headers, if I try install this packed I got this information: E: Unable to locate package linux-headers-3.4.39
[18:48] <EriC^^> Macsurf: wow that's a really old kernel..
[18:48] <Macsurf> this kernel is for Orange Pi
[18:48] <EriC^^> Macsurf: are you using 12.04?
[18:48] <k1l_> Macsurf: what is "lsb_release -d"?
[18:49] <Macsurf> Eric^^:VERSION="15.04 (Vivid Vervet)"
[18:50] <Macsurf> I try compile module for rt73 wifi but I need to have kernel-headers source
[18:50] <jmadero> hi all - I'm trying to get a bash script to run in cron but it doesn't run (it runs fine when manually run through terminal): http://pastebin.com/SvKLu24H
[18:51] <k1l_> Macsurf: there is no kernel source for that on ubuntu.
[18:51] <MonkeyDust> jmadero  try with an absolute path, for the command
[18:51] <k1l_> Macsurf: you better ask the orange pi community how to get that working
[18:51] <Macsurf> k1l_: so I can`t compile module for wifi ?
[18:52] <jmadero> MonkeyDust: I have an absolute path (my cront entry: 01 21 * * * /bin/bash /home/joel/Documents/Computer/Scripts/dailyPodcast.sh)
[18:52] <EriC^^> jmadero: try adding 2>/tmp/cron.log at the end
[18:52] <k1l_> Macsurf: for modules you need the headers. that is not an ubuntu kernel so ask the one who gave you that kernel where to get the sources.
[18:52] <daftykins> why are you executing a script with bash, then calling sh? o0
[18:53] <MonkeyDust> jmadero  ok, try 'sh' not 'bash' as command
[18:53] <vidhan_> I need help with downloading torrent using aria2c
[18:53] <Kingsqueak> trying to sort out what I think is an OpenGL issue with Intel 5600 drivers on 15.10, is there a channel that is best for that? Basically I have an app I've compiled where the display won't draw properly on this new system on 15.10 that worked on an old box with 14.04
[18:54] <Kingsqueak> correction Intel 4600
[18:55] <regexprob> Hi, I have files that start with 21 and end in .txt I'm trying to move them into a folder. I've tried this regex: 21.*.txt but it says no such file found.
[18:55] <nicomachus> regexprob: try 21*.txt
[18:56] <slidinghorn> Kingsqueak: there's an #opengl channel here on freenode, I believe
[18:56] <Kingsqueak> k
[18:56] <regexprob> @nicomachus: still same thing
[18:56] <jmadero> regexprob: is the file 21 then a period?
[18:56] <jmadero> regexprob: try 21*txt
[18:56] <jmadero> oh sorry - I see
[18:57] <regexprob> @jmadero: no it's 21-asdfasdf.txt
[18:57] <jmadero> MonkeyDust: no good still
[18:57] <jmadero> MonkeyDust: 57 10 * * * /bin/sh /home/joel/Documents/Computer/Scripts/dailyPodcast.sh
[18:58] <regexprob> @nicomachus: 21*.txt actually did the trick thank you
[18:59] <regexprob> @jmadero: thank you as well. it wasn't followed directly by a period so I didn't need it in my regex
[18:59] <jmadero> regexprob: glad it worked
[18:59] <MonkeyDust> jmadero  try with another command, first
[19:00] <MonkeyDust> jmadero  i mean, make sure it's not due to the path
[19:01] <vidhan_> hi I need help with aria2c can any one help me ?
[19:01] <IIT> is any one running ubuntu on amd a6-6310 apu ?
[19:03] <MonkeyDust> vidhan_  ask your question in the channel, don't ask to ask
[19:03] <frecel> ok this is odd
[19:04] <frecel> it looks like I'm missing the authentication keys for all repos
[19:04] <daftykins> frecel: pastebin of apt-get update?
[19:04] <IIT> is any one running ubuntu on amd a6-6310 apu ?
[19:04] <vidhan_> aria2c https://torcache.net/torrent/3F19B149F53A50E14FC0B79926A391896EABAB6F.torrent?title=[kat.cr]ubuntu.15.10.desktop.64.bit is not working MonkeyDust
[19:04] <IIT> opps sorry for the second post..
[19:05] <daftykins> IIT: if they were, why?
[19:06] <daftykins> vidhan_: what about official torrents?
[19:06] <IIT> daftykins, wanted to know how it works, does it lags  under normal operation ? I want to get a laptop wiht that cpu for programming purpose
[19:06] <MonkeyDust> vidhan_  kat.cr is not to be trusted... download ubuntu 15.10 from ubuntu.com
[19:06] <vidhan_> daftykins: I think that is working but I wana download torrents similar to this ones :) from kat :)
[19:07] <daftykins> vidhan_: well that's stupid, use official torrents...
[19:07] <frecel> daftykins: I was having trouble connecting to the repos. The gui updater was telling me that I'm trying to install software from unauthenticaded sources and quitting ( this is a fresh 15.10 no extra repos no ppas added)
[19:07] <frecel> now I tried it from terminal and it seems to be working (it didn't before)
[19:07] <daftykins> frecel: that message doesn't look awfully like a pastebin of "sudo apt-get update" :)
[19:07] <OerHeks> vidhan_, use the *official* torrents http://torrent.ubuntu.com:6969/
[19:08] <vidhan_> daftykins: aria2c should work on any torrent right ?
[19:08] <frecel> daftykins: what I'm saing is that for some reason the sudo apt update is running fine now and I'm running the upgrade
[19:08] <daftykins> i don't know what that is, vidhan_
[19:08] <frecel> I don't have a save of what was happening before
[19:08] <daftykins> frecel: ok, maybe try the GUI tool again after update :)
[19:08] <MonkeyDust> vidhan_  i tried it... aria2c fails, but deluge does the job
[19:09] <vidhan_> deluge ? let me google it :)
[19:09] <MonkeyDust> vidhan_  google? it's in the repos
[19:09] <MonkeyDust> !info deluge
[19:09] <vidhan_> is it a command line client MonkeyDust ?
[19:10] <daftykins> vidhan_: what i'm telling you, is we're not going to help you resolve why suspicious torrents from kat don't work, it's a shift site and isn't relevant to us :)
[19:10] <daftykins> *shifty
[19:10] <MonkeyDust> vidhan_  no it's a gui
[19:10] <vidhan_> problem here is help with aria2c not the site :(
[19:11] <OerHeks> standard transmission can be used from cli, or webpage
[19:11] <jjlx> I use hotcorners. Is there any way to enable an animation like the one in gnome when a hotcorner is activated?
[19:11] <MonkeyDust> !bittorrent | vidhan_
[19:11] <vidhan_> MonkeyDust: any alternative other than rtoorrent ?
[19:11] <maxxxxx> i need help upgrading from utopic to vivd
[19:11] <daftykins> maxxxxx: you're still on 14.10? that is seriously unwise.
[19:11]  * jmadero sighs
[19:11] <maxxxxx> i know....
[19:12] <maxxxxx> it's getting worse and i really need to upgrade
[19:12] <daftykins> maxxxxx: remove any proprietary graphics drivers, remove any software from PPAs, remove the PPAs, then "do-release-upgrade" in a terminal
[19:12] <maxxxxx> erm...
[19:12] <maxxxxx> how do i do that, daftykins
[19:12] <daftykins> do what
[19:12] <daftykins> !ppapurge
[19:13] <daftykins> the irony of adding a PPA to install a tool to remove PPAs is not wasted on me o0
[19:13] <maxxxxx> how do i install ppa-purge?
[19:13] <maxxxxx> OH OOPS
[19:13] <daftykins> read the link
[19:13] <maxxxxx> MISSED A WORD
[19:13] <maxxxxx> never mind
[19:13] <vidhan_> MonkeyDust: Thanks for the Help !
[19:14] <maxxxxx> daftykins, i always forget to say install before i type the software name :p
[19:15] <maxxxxx> daftykins, how do i know what PPA's i have added?
[19:16] <daftykins> maxxxxx: are you using standard unity ubuntu?
[19:16] <maxxxxx> yes
[19:17] <IIT> daftykins, ?
[19:17] <daftykins> maxxxxx: run the 'system settings' app from the launcher on the left, then go into 'software and updates' i think it's called at the bottom and have a dig around
[19:17] <shudon> $ --help<tab>
[19:17] <daftykins> IIT: i don't know anything about modern AMD laptops.
[19:17] <shudon> $ --help <tab> # try it
[19:17] <daftykins> try ##hardware
[19:17] <shudon> (you need the space)
[19:18] <jmadero> wth - nothing runs from my cron jobs
[19:18] <jmadero> it's not just scripts - just tried to run gpodder directly from cron and nothing started
[19:18] <IIT> daftykins, okay.. just need an advice if you can give... is a dediated dekstop with i3 th gen cpu is better than entry level laptop ?
[19:18] <shudon> jmadero: how exactly did you try to run gpodder directly from cron?
[19:19] <jmadero> shudon: two ways 18 11 * * * gpodder and 18 11 * * * /usr/bin/gpodder
[19:19] <maxxxxx> daftykins, http://imgur.com/share/i/ZNfZpnV
[19:19] <maxxxxx> is it these?
[19:19] <daftykins> IIT: you missed a number saying which generation i3 you meant
[19:19] <Stef__> Stef
[19:19] <Stef__> hey watup
[19:19] <daftykins> maxxxxx: that imgur link needs a sign in
[19:19] <awuah> i need help pls
[19:19] <daftykins> ask a question pls
[19:19] <jmadero> awuah: just state your question
[19:20] <awuah> how can i install viber
[19:20] <daftykins> don't think that works
[19:20] <awuah> in ubuntu
[19:20] <maxxxxx> daftykins, http://imgur.com/ZNfZpnV
[19:20] <awuah> i have see that in the preview's
[19:20] <daftykins> maxxxxx: yep those are the suckers, e.g. like Steam
[19:20] <jmadero> awuah: looks like Windows software?
[19:20] <jmadero> awuah: http://askubuntu.com/questions/366587/how-to-install-viber-on-ubuntu-13-10-32bit
[19:21] <daftykins> maxxxxx: uh-oh i see an absolute mess of a mix of precise repos as well as trusty in there >_<
[19:21] <daftykins> maxxxxx: i'm starting to think your machine is going to be so hosed, a backup and clean install will be in order
[19:21] <awuah> am using 64 bit
[19:21] <maxxxxx> fuck.....
[19:21] <OerHeks> daftykins, and utopic
[19:21] <OerHeks> :-D
[19:21] <maxxxxx> i can't do a back up
[19:22] <maxxxxx> i don't have anywhere with enough space
[19:22] <daftykins> then buy somewhere
[19:22] <jmadero> maxxxxx: .... lesson learned....invest in an external
[19:22] <maxxxxx> i don't have any money.....
[19:22] <maxxxxx> i'm 17 years old with no job what am i supposed to do....
[19:22] <daftykins> not our problem.
[19:22] <IIT> daftykins, 4th gen i3 4150 cpu
[19:23] <jmadero> maxxxxx: yeah...not much to say
[19:23] <jmadero> get a job? I dunno
[19:23] <maxxxxx> fuck.....
[19:23] <daftykins> IIT: i go for a minimum of i3 when picking for people
[19:23] <jmadero> well I had advice to give to him but apparently he wasn't interested
[19:24] <IIT> so i3 on a desktop will be more better for me instead going for a entry level laptop..
[19:24] <daftykins> young enough to rage ;)
[19:24] <jmadero> probably smashing his only computer now
[19:25] <jmadero> if he wasn't using his entire hard drive he could have used gparted or something to create a backup partition, save what he wants, then purge those crap partitions
[19:27] <jmadero> finally got this cron to work....stupid thing lol
[19:27] <daftykins> not a wise move, keeping a duplicate on the same disk... as good as bacing up to 5.25" floppy
[19:27] <daftykins> *backing
[19:27] <SebastianTCL> what is command line to know the specific model of my laptop?
[19:27] <daftykins> jmadero: what was the change needed?
[19:27] <daftykins> SebastianTCL: sometimes "dmesg" has some info at the very top
[19:28] <jmadero> I'm still working on the script part but I at least got gpodder to run directly "27 11 * * * export DISPLAY=:0 && gpodder"
[19:28] <MonkeyDust> SebastianTCL  sudo dmidecode -s system-product-name
[19:29] <SebastianTCL> HP ENVY dv6 Notebook PC well that doesn't help that much as i already know that
[19:29] <SebastianTCL> the stickers have relented though
[19:32] <daftykins> SebastianTCL: well what are you trying to find out?
[19:32] <SebastianTCL> dv6-xxxx
[19:32] <daftykins> has your underside info worn off?
[19:32] <daftykins> i.e. the strip of details on the underside of the laptop
[19:33] <jmadero> daftykins: "(11:29:27 AM) SebastianTCL: the stickers have relented though"
[19:33] <jmadero> I suspect that is an affirmative to your question :)
[19:33] <daftykins> no that's ambiguous to me.
[19:34] <daftykins> hence me asking...
[19:36] <SebastianTCL> how do i check an md sum file?
[19:36] <bazhang> !md5
[19:37] <SebastianTCL> it's on the desktop so cd Desktop
[19:37] <bazhang> SebastianTCL, ^
[19:37] <jmadero> ....Google can answer some of these questions in .... 0.01 seconds
[19:37] <bazhang> jmadero, we exist so google doesnt need to be asked
[19:38] <bazhang> !hashes | SebastianTCL
[19:40] <IIT> daftykins, going with a desktop i.e. i3 4150 4th gen atleast i can do stuff without getting any lag and do it faster..
[19:41] <daftykins> faster than trying on a banana yep.
[19:42] <IIT> ?
[19:42] <IIT> my english is not that good to understand what you were trying to say..
[19:42] <daftykins> that i don't know what you're comparing to
[19:42] <IIT> daftykins, compared to buying a laptop with that amd a6 processor..
[19:43] <daftykins> *shrug* look up a comparison of the two.
[19:43] <IIT> a6-6310.. cpu benchmarks shows scores around 2400 and for i3 4150 it's 5200
[19:43] <OerHeks> just comparison of the cpus is not the whole picture
[19:43] <daftykins> ##hardware is where that discussion belongs
[19:43] <IIT> almost more than twice faster..
[19:43] <IIT> okay..
[19:43] <IIT> OerHeks, than ?
[19:44] <IIT> HDD or ssd ?
[19:44] <OerHeks> all of it, chipset, ram, hdd or ssd indeed
[19:45] <IIT> chipset too ? i didn't knew that..
[19:49] <Macsurf> Where I find kernel config ? in /boot there is nothing
[19:51] <josharenson> Macsurf: http://kernel.ubuntu.com/~kernel-ppa/configs/wily/ (or change wily to whatever)
[19:52] <OerHeks> in /boot/config-`uname -r`
[19:52] <Macsurf> hosharesnson I need oldconfig for compile module
[19:53] <Macsurf> this is my all files in boot: boot0_OPI.fex        u-boot_OPI.fex  uImage_OPI-2
[19:53] <Macsurf> u-boot_OPI-emmc.fex  uImage          uImage_OPI-PLUS
[19:53] <OerHeks> this is not ubuntu, is it?
[19:54] <Macsurf> this is ubuntu for OrangePI
[19:54] <josharenson> Macsurf: make oldconfig not working? (been years since I've compiled a kernel in ubuntu)
[19:54] <MonkeyDust> http://orangepi.com/
[19:55] <myztic> josharenson: honest question, why do people do it? for servers?
[19:55] <myztic> I personally would not use ubuntu for a server but for a server I understand it
[19:55] <daftykins> kernel compilation? mostly Linux ricers :)
[19:55] <k1l_> Macsurf: first that is a arm so the whole driver and kernel situation is totally different from the PC versions. then the best chances for support are within the boards community.
[19:55] <daftykins> it's great as a server, myztic
[19:55] <josharenson> myztic: not much of a reason for 99.9% of people... Usually if you have weird hardware or something
[19:55] <Macsurf> josharenson: working but I need copy oldconfig to my working folder with sources
[19:56] <myztic> daftykins: I don't even doubt that, but I am a big *BSD Fan and whenever I see a chance of using it ;)
[19:56] <myztic> I do ;)
[19:56] <daftykins> that's off topic.
[19:56] <MonkeyDust> Macsurf  i guess you'll an answer quicker in #raspberrypi
[19:56] <myztic> daftykins: i've been using funtoo for a while and compiled my own kernel... boy did I feel l33t :P LD
[19:56] <Macsurf> if I will not copy file with oldconfig then I need answer on hundret questions
[19:56] <MonkeyDust> you'l get*
[19:57] <k1l_> myztic: ubuntu is fine for servers. its kind of leading in the cloud-world. and since its very widespread there are lots of packages and howtos available
[19:57] <daftykins> myztic: #ubuntu-offtopic or better yet a channel for those things, but this channel is not the place.
[19:58] <MonkeyDust> Macsurf  there are some 10 people in #orangepi
[19:58] <myztic> k1l_: see daftykins 's post, we are not allowed to discuss any further ;) (yeah I know :))
[19:58] <Macsurf> MonkeyDust: hmmm I dont see any users on this channel
[19:59] <daftykins> myztic: such a hardship joining a channel, i know :(
[19:59] <Macsurf> MonkeyDust: ok I see sorry
[19:59] <MonkeyDust> Macsurf  orangepi is a raspberrypi clone, so better ask in #raspberrypi
[19:59] <myztic> daftykins: I don't want to start a fight, easy, I get it, this channel is extremely high volume with a lot of users, don't worry, I understand
[20:03] <pan_jezus> hello. i cannot install Ubuntu on HDD becuase of problem with installing boot loader. what can I do?
[20:03] <EriC^^> pan_jezus: install the bootloader later
[20:04] <pan_jezus> EriC^^: But after reboot only flashing command promnt is being displayed.
[20:04] <EriC^^> pan_jezus: boot the live usb
[20:04] <EriC^^> chroot and install from there
[20:09] <MonkeyDust> pan_jezus  start from the beginning, what have you tried so far, what happens or doesnt happen
[20:10] <holucon> I'm working with encfs, and experiencing some slow transfer speeds.
[20:10] <holucon> is there a way to use encfs without mounting through fuse?
[20:11] <pan_jezus> EriC^^: I'll try. Thank You.
[20:12] <EriC^^> pan_jezus: follow this guide from step 6 https://help.ubuntu.com/community/Grub2/Installing#via_ChRoot
[20:12] <pan_jezus> EriC^^: I received: http://pastebin.com/NXmZN99u after "grub-install /dev/hda" from https://dug.net.pl/tekst/77/przywracanie_grub2_za_pomoca_chroot/
[20:13] <EriC^^> pan_jezus: did you mount --bind /dev ?
[20:13] <pan_jezus> EriC^^: No. Should I?
[20:14] <EriC^^> pan_jezus: yeah
[20:14] <pat__> CTCP -proxy- IRSSIPROXY BACKLOG SEND
[20:14] <EriC^^> exit the chroot
[20:14] <EriC^^> pan_jezus: type the following
[20:14] <EriC^^> where did you mount the root filesystem?
[20:18] <pan_jezus> EriC^^: I did "mount --bind /dev" during chroot, but "mount: mount(2) failed: No such file or directory"
[20:18] <EriC^^> pan_jezus: exit the chroot
[20:18] <EriC^^> type sudo apt-get install pastebinit
[20:18] <EriC^^> then type mount | pastebinit
[20:22] <pan_jezus> EriC^^: http://paste.ubuntu.com/14090389/
[20:22] <genii> sda1 seems to be mounted twice there
[20:23] <ioria> i'll exit from there , maybe reboot
[20:24] <EriC^^> pan_jezus: reboot the pc
[20:24] <pan_jezus> sda1 could be mounted twice- one by Unity, and 2nd by "sudo mount /dev/sda1 /mnt/root
[20:24] <pan_jezus> "
[20:25] <pan_jezus> EriC^^: OK. "I'll be back!"
[20:25] <EriC^^> pan_jezus: it's also mounted at /mnt/root/boot
[20:25] <EriC^^> ok
[20:27] <goddard> does ubuntu come with a VNC server?
[20:28] <goddard> or do you have to install it?
[20:28] <ioria> vino
[20:28] <pan_jezus> EriC^^: I'm back. What to do now?
[20:29] <EriC^^> pan_jezus: type sudo apt-get install pastebinit
[20:29] <EriC^^> then sudo parted -l | pastebinit
[20:29] <ioria> /usr/lib/vino/vino-server
[20:30] <ioria> and then type vino in dash
[20:30] <pan_jezus> EriC^^: http://paste.ubuntu.com/14090445/
[20:31] <EriC^^> pan_jezus: type sudo mount /dev/sda1 /mnt
[20:32] <pan_jezus> EriC^^:  Did.
[20:32] <pan_jezus> EriC^^: Maybe there
[20:33] <pan_jezus> EriC^^: Maybe there is www with list of all needed commands?
[20:33] <Pinkamena_D> did the chromium icon change in the last update? It looks more blue now for some reason.
[20:33] <pan_jezus> EriC^^: I don't want to use to much of your time.
[20:33] <EriC^^> pan_jezus: it's np
[20:33] <EriC^^> pan_jezus: type the following
[20:34] <goddard> ioria: oh right thanks
[20:34] <ioria> goddard, you're welcome
[20:34] <EriC^^> pan_jezus: for in in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done
[20:35] <pan_jezus> "for in in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done
[20:35] <pan_jezus> "for in in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done"?
[20:36] <elkalamar> he meant 'for i in...'
[20:36] <pan_jezus> EriC^^: Did "for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done "
[20:36] <EriC^^> pan_jezus: ok, type sudo chroot /mnt
[20:37] <pan_jezus> EriC^^: Did.
[20:37] <EriC^^> elkalamar: ty
[20:37] <EriC^^> pan_jezus: ok, type grub-install --recheck /dev/sda
[20:38] <pan_jezus> EriC^^: Installing for i386-pc platform.
[20:38] <pan_jezus> Installation finished. No error reported.
[20:39] <genii> EriC^^: Now I'm waiting for it complain of canonical /cow name when update-grub is run ;)
[20:39] <EriC^^> pan_jezus: type update-grub
[20:39] <r10101> hello there I'm having problems to install the Qtractor package can any one help me?
[20:40] <ioria> !info  qtractor
[20:40] <pan_jezus> EriC^^: http://pastebin.com/AqxzWYgZ
[20:41] <r10101> I have made copy paste to the installation info in my terminal in the extracted package and it doesn't work
[20:41] <EriC^^> pan_jezus: looks good, type exit then restart
[20:41] <kleops> Hi, is it possible yet to dual boot Windows8.1 and Ubuntu if you have UEFI?
[20:42] <EriC^^> genii: he ran the mount --bind command
[20:42] <pan_jezus> EriC^^: Thank You. Rebooting.
[20:42] <EriC^^> kleops: yes
[20:42] <EriC^^> pan_jezus: np
[20:42] <kleops> EriC^^: So there's nothing I have to play around with before doing it?
[20:43] <r10101> Hi ubottu hope you can help
[20:43] <ioria> r10101, it's not in the repo ?
[20:43] <EriC^^> kleops: you might need to play around after installing if your bios is stubborn
[20:43] <r10101> it appears but it crash down when I donwload it
[20:43] <EriC^^> kleops: you should turn off the fast startup in windows though
[20:43] <r10101> thanks ioria
[20:44] <ioria> r10101, ok
[20:44] <EriC^^> fast shutdown i think it's called kleops
[20:44] <torsion> I'm looking at the minimal install option (https://help.ubuntu.com/community/Installation/MinimalCD) but it actually seems to not be what I'm looking for. The minimal installer download packages instead, but I want the installed-stuff to be minimal; I care less about the image size itself.
[20:44] <kleops> yep
[20:44] <kleops> But why?
[20:44] <EriC^^> kleops: it's a hybrid hibernation, so if you boot into ubuntu you can't mount the windows partition as it's in an unstable state
[20:44] <r10101> also a video downloader bit frustrating
[20:45] <torsion> Is there another kind of "minimal" install that ubuntu offers? I don't want unity, etc, just X and a desktop manager of my choosing.
[20:45] <kleops> ah okay
[20:45] <ioria> torsion, if you don't select nothing, you'll a  a minimal... or are you looking for the Core ?
[20:45] <ioria> *have
[20:45] <kleops> Also what happened to wubi? It made everything so much easier
[20:45] <daftykins> no it didn't, it made support impossible
[20:45] <daftykins> !wubi
[20:45] <daftykins> banished to whence it came
[20:46] <kleops> hm
[20:46] <ioria> torsion, mini.iso does not have Unity... it has nothing at all about DE
[20:46] <torsion> ioria: is there a way to find out what the installer options are, short of burining the image and discovering myself?
[20:47] <ioria> torsion, are you using mini.iso ?
[20:47] <torsion> ioria: what? I'm not using any image. I want to know what a minimal installer will install, and what the options are.
[20:48] <torsion> whatever, I'll just burn the fucker and find out
[20:48] <r10101> hello can you help me Im in this restaurant not in home
[20:48] <ioria> torsion, i think mini.iso is the minimal  you can have....
[20:49] <ioria> torsion, or look at this https://help.ubuntu.com/community/Lubuntu/Documentation/MinimalInstall
[20:49] <torsion> ioria: there are two senses of "minimal". The first sense is that the actual image is minimal. The second sense is that the stuff installed is minimal. The wiki says it downloads the rest of the shit, so one can have a "minimal" installer giving loads of shit.
[20:50] <EriC^^> torsion: ubuntu comes with a de, except for the server image which doesn't come with x, the mini iso lets you decide what to install
[20:50] <ioria> torsion, ok... what are you looking for , exactly ?
[20:51] <torsion> ioria: just what I said -- xorg with a window manager of my choosing.
[20:51] <r10101> Guys Im in this restaurant and I dont have internet at home please help me with this
[20:51] <ioria> torsion, mini.iso , select nothing , then install xorg xinit your wm and stuff ....
[20:51] <nicomachus> r10101: what is your issue?
[20:51] <torsion> ok, maybe it'll work to choose server then, and then use it as a not-server.
[20:52] <torsion> ioria: does the minimal installer offer full-disk encryption?
[20:52] <r10101> Can't install this fellow http://qtractor.sourceforge.net/qtractor-index.html
[20:52] <torsion> whatever, I should just burn it instead of talking
[20:52] <ioria> torsion, i guess .... yes
[20:52] <torsion> ok thanks
[20:53] <ioria> torsion, no, sorry only home
[20:53] <nicomachus> r10101: did you follow the instructions on the installation page there? http://qtractor.sourceforge.net/qtractor-index.html#Installation
[20:53] <ioria> torsion, honestly, don't remember
[20:53] <lambda_> Hi, does anybody know if there is a package in the official repositories that can get the effect of "topicons" extension for gnome3 ?
[20:53] <ioria> torsion, just boot it, and find out
[20:53] <r10101> in the best of my capacity
[20:54] <nicomachus> r10101: ok, at what point did you get an error?
[20:54] <r10101> copy paste what is in the page
[20:54] <nicomachus> r10101: did you download the tar.gz first?
[20:55] <r10101> dont know
[20:56] <r10101> donwloaded from here http://sourceforge.net/projects/qtractor/ extract it then open terminal then copy paste what is in the page to intall it
[20:57] <r10101> terminal says this: r@r-Inspiron-N5030:~$  ./configure [--prefix=prefix]
[20:57] <r10101> bash: ./configure: No such file or directory
[20:57] <r10101> r@r-Inspiron-N5030:~$ make install
[20:57] <r10101> make: *** No rule to make target `install'.  Stop.
[20:57] <r10101> r@r-Inspiron-N5030:~$ make install
[20:57] <r10101> make: *** No rule to make target `install'.  Stop.
[20:58] <nicomachus> r10101: ok, you can't just copy-paste what's on the page because you input your own prefix. You also have move your terminal into the correct directory or it doesn't know what you're trying to ./configure.
[20:58] <nicomachus> !paste | also this, r10101
[21:00] <nicomachus> r10101: luckily enough, you don't have to do it that way because qtractor is already in the repos.
[21:00] <pan_jezus> one more question: what is ico "install RELEASE" for? I've got 15.10 here.
[21:00] <r10101> ok I have the terminal in the correct directory but what should I do now?
[21:00] <nicomachus> r10101: open a terminal and type "sudo apt-get install qtractor"
[21:00] <r10101> I have tried to download it with ubuntu center and it doesnt work
[21:00] <r10101> in any terminal?
[21:00] <nicomachus> yes.
[21:01] <r10101> unable to locate package qtractor
[21:01] <r10101> :(
[21:01] <nicomachus> r10101: ok. what version of ubuntu are you on?
[21:01] <jesuslovesyouthi> my wordpress install (locally) on an 14.04 lts desktop installation blew up on me. I used to have a wordpress installation on this system but I thought I'd removed it. Now, after following a tutorial to install: https://help.ubuntu.com/community/WordPress   I don't know what happened
[21:02] <jesuslovesyouthi> I wonder if some information makes more sense to someone here than it does to me: The first screen I see when I visit http://localhost/wordpress/     it redirects to     http://localhost/wordpress/wp-admin/setup-config.php?step=1     and the first two screens look different (only 4 mos from publishing of the tutorial)     http://imgur.com/a/x3p5x     Something seems odd about the location and content of some things and I wonder if I have 2 installs
[21:02] <jesuslovesyouthi> going that are located in 2 different places or what     http://localhost/wordpress/wp-admin/setup-config.php?step=1
[21:02] <r10101> don't know  I can try to intall the newest one that may help right?
[21:02] <jesuslovesyouthi> Can anyone advise?
[21:03] <nicomachus> r10101: what is the output of "lsb_release -a"?
[21:03] <r10101> the what?
[21:04] <r10101> how do I get you that info?
[21:04] <nicomachus> type "lsb_release -a" into a terminal and tell me what the number says.
[21:04] <r10101> got it
[21:04] <SchrodingersScat> jesuslovesyouthi: the ubuntu community page was last updated over a year ago, so if it's just that things look different from that, then I wouldn't worry about it.
[21:05] <SchrodingersScat> jesuslovesyouthi: you could still try to apt-get purge wordpress if you wanted, then check the directory to see if anything is left.  then check into how to clean your mysql if it's still around.
[21:06] <r10101> did you write it well it appear somke kind of error info
[21:07] <jesuslovesyouthi> SchrodingersScat: not just looks, the install does not work. In trying to investigate the problem a little, it looks to me as though there are 2 installations (one old from about a year ogo that I did on this system) and the one I jsut run the commands on. I don't know enough about this kind of thing (anything more than apt-get install something and press the enter key) to tell
[21:07] <nicomachus> r10101: it should look like this: http://pastebin.ubuntu.com/14090736/
[21:07] <jesuslovesyouthi> So I pasted some information showing the problem (hoping someone else with experience can tell what is going on)
[21:08] <r10101> oh I needed the "_" in the line
[21:09] <Polarcraft> So I got a problem with afs3-fileserver running on my ssh port. Is there a way I can just remove afs3-fileserver?
[21:09] <r10101> 13.04
[21:09] <nicomachus> 13.04??
[21:09] <spaok> hey guys, anyone familiar with MAAS preseeding who might want to give me a hand?
[21:09] <r10101> too old?
[21:09] <jesuslovesyouthi> how can I tell if I have worpress intallation spread all over my computer (in more than one location); and, if so, remove all of it so I can start over with the install?
[21:09] <r10101> :S
[21:10] <nicomachus> r10101: yes, way too old. not supported anymore. You need to upgrade to 14.04.3
[21:10] <r10101> wow
[21:10] <nicomachus> !ringtail | r10101
[21:10] <daftykins> jesuslovesyouthi: err, depends how you've tried installing
[21:10] <r10101> ok but this will not change my info in my pc right
[21:11] <jesuslovesyouthi> daftykins: like this: https://help.ubuntu.com/community/WordPress
[21:11] <nicomachus> r10101: no it won't. once you upgrade to a supported released you can install that program.
[21:11] <k1l_> r10101: install a proper recent ubuntu like 15.10 or 14.04LTS. 13.04 is dead long time now
[21:11] <jesuslovesyouthi> but I had a previous install that sat and didn't use from like a year ago. I though I had removed it but maybe I forgot and it also was there still
[21:11] <daftykins> jesuslovesyouthi: mmm i'd not follow that personally
[21:12] <jesuslovesyouthi> daftykins: yeah, too late now
[21:12] <r10101> ok let me see how do I do that any problem as the governator use to say I'll be back ;) thanks guys
[21:12] <jesuslovesyouthi> now I have a half baked install that won't finish
[21:12] <daftykins> so nuke it
[21:13] <r10101> used sorry for bad english have to work on it let me see how to update ubuntu best thanks for the help
[21:13] <jesuslovesyouthi> how? I don't know about all this mysql stuff and scripts and commands with the word 'bash' in them that were run ... God knows what all got plastered around on my computer (databases and whatnot)
[21:14] <daftykins> jesuslovesyouthi: that was very unwise
[21:16] <jesuslovesyouthi> daftykins: yeah, well ... it's too late now
[21:17] <daftykins> no
[21:17] <jesuslovesyouthi> I don't know enuf to know if I was blowin it  :(
[21:17] <Polarcraft> Is it just me or does the ssh port not change when I put 7000?
[21:17] <daftykins> Polarcraft: where? you have to restart the service after reconfiguring
[21:17] <Polarcraft> daftykins, I did a reboot, but afs3-fileserver keeps running on 7000.
[21:18] <jesuslovesyouthi> daftykins: yeah, well ... it's too late now
[21:18] <myztic> I quite regularly need to download youtube videos (in the best quality possible), any suggestions (either a very good website or preferable a program on the desktop)?
[21:18] <jesuslovesyouthi> I don't know enuf to know if I was blowin it  :(
[21:18] <daftykins> jesuslovesyouthi: no it's not, i'm going to ignore you now for repeating annoyingly.
[21:18] <daftykins> Polarcraft: oh, when you said SSH port that sounded like you were reconfiguring SSHd
[21:19] <Polarcraft> Well I changed the port for SSHD
[21:19] <Polarcraft> So.
[21:19] <bazhang> myztic, youtube-dl or firefox browser plugin both work
[21:19] <Polarcraft> And then I restarted the server.
[21:19] <jesuslovesyouthi> what the hell do you people want from me? I come here looking for help and someone doesn't like the way I said something so now they don't want to help me. So I'm supposed to be screwed? Anyone else come here and it's ok, they can be helped. But I come and I can't get helped?
[21:20] <jesuslovesyouthi> so what the hell????
[21:20] <nicomachus> !language | jesuslovesyouthi
[21:20] <Polarcraft> Damn
[21:20] <bazhang> jesuslovesyouthi, first, no cursing. second dont ask a single user
[21:21] <jesuslovesyouthi> you peole got some reason no matter what I say or what I do. YOu know why that is? Because you decided beforehand to deal with me like that (even before I say anything at all)
[21:21] <bazhang> jesuslovesyouthi, ask every twenty minutes or so
[21:21] <jesuslovesyouthi> so you lookin for a reason and you pick anything I do say (so what)
[21:21] <Polarcraft> So how would I disable afs3-fileserver from running on that port, and/or make ssh run on 7000 without getting disabled by afs3-fileserver?
[21:21] <jesuslovesyouthi> bazhang: that fine - but why someone act so rude daftykins
[21:22] <bazhang> jesuslovesyouthi, if someone knows they might choose to help, thats how volunteer support works
[21:22] <jesuslovesyouthi> maybe daftykins should be banned or something if can't be decent to people
[21:22] <jesuslovesyouthi> well I get sick of it
[21:22] <bazhang> jesuslovesyouthi, thats enough
[21:25] <myztic> found a solution, youtube-dl was already installed  just use it like youtube-dl -f best youtube_link
[21:25] <myztic> awesome :)
[21:25] <bazhang> myztic, the -t flag will give the exact title if I recall correctly
[21:29] <cyber> How well does Ubuntu or Mint run on a new Macbook Pro?
[21:30] <cyber> or Macbook Air for that matter
[21:33] <k1l_> cyber: https://help.ubuntu.com/community/MacBookAir
[21:37] <andrewjs18> hi folks, has anyone ever dealt with this error when restarting apache?  FastCgiWrapper: "/usr/lib/apache2/suexec" execute access for server (uid 1000, gid 1000) failed: execute not allowed
[21:38] <xcelq> problem solved
[21:38] <xcelq> don't use apache
[21:38] <Pici> xcelq: thats not very helpful.
[21:38] <andrewjs18> exactly
[21:39] <Pici> andrewjs18: are you sure you used sudo to restart it?
[21:39] <andrewjs18> Pici, yep, just double checked
[21:39] <xcelq> hm
[21:39] <xcelq> do you have a proper config?
[21:40] <Pici> andrewjs18: something is weird there, since its referencing your user's uid.
[21:40] <xcelq> or
[21:40] <genii> andrewjs18: Looks like it's trying to start with your regular UID and admin
[21:40] <xcelq> yeah
[21:40] <genii> and NOT admin
[21:40] <k1l_> andrewjs18: is this a original ubuntu package? what ubuntu is it?
[21:40] <xcelq> httpd should always be under a
[21:40] <xcelq> user
[21:41] <andrewjs18> k1l_, ubuntu 14.04
[21:42] <cyber> thanks kil_
[21:43] <k1l_> andrewjs18: is it the ubuntu package? or is it a xampp package?
[21:44] <andrewjs18> it's a regular LAMP package
[21:44] <andrewjs18> apache 2.4, php 5.5
[21:44] <k1l_> andrewjs18: was it installed from the ubuntu packages?
[21:44] <andrewjs18> yes
[21:45] <andrewjs18> recently upgraded from ubuntu 12.04 to 14.04 last night.  the site was working prior to the upgrade.  I think I modified the configs correctly
[21:45] <andrewjs18> can post the config if you'd like
[21:48] <andrewjs18> k1l_, https://zifb.in/8msK86ys0P
[21:48] <r10101> Hi there now it the update center it doesn't work!
[21:48] <andrewjs18> apache config^
[21:48] <k1l_> i dont have /usr/lib/apache2/suexec at all
[21:48] <r10101> tried changing server does any one now one that work?
[21:48] <k1l_> r10101: the problem is, that you have waited way to long
[21:49] <k1l_> !eolupgrade | r10101
[21:49] <nicomachus> r10101: check that second link.
[21:49] <k1l_> r10101: change the sources.list like its described in there
[21:49] <OerHeks> indeed, use the old-releases trick
[21:50] <k1l_> andrewjs18: i dont know about suexec module for apache.
[21:51] <andrewjs18> k1l_, aside from that, does the conf look ok?
[21:53] <truexfan81> 3.19.0-41-generic i686  is that the most up to date kernel on 14.04.3?
[21:53] <k1l_> andrewjs18: dont know, sorry
[21:53] <andrewjs18> k1l_, thanks for trying to help
[21:53] <MonkeyDust> truexfan81  3.19.0-39-generic here, with HWE
[21:54] <truexfan81> MonkeyDust: kk apt-get dist-upgrade will give you -41
[21:56] <luzifujio666> 666
[21:58] <luzifujio666> Fallo de seguridad informatica windows server 2012r12
[21:59] <MonkeyDust> !es
[21:59] <daftykins> !info linux-image-generic-lts-vivid trusty
[21:59] <k1l_> luzifujio666: this is not windows support. its #ubuntu
[22:01] <luzifujio666> Kil
[22:01] <zamba> nicomachus: figured it out.. the way to fix it was to actually disable all network mounts.. the system refused to boot without network connectivity.. to me this is a huge bug
[22:01] <zamba> nicomachus: so the boot process hung on the nfs mount
[22:02] <nicomachus> zamba: that makes sense. all fixed now?
[22:03] <b80905> I just installed ubuntu 15.10 and after logging in I don't see any panels or menus. However if I right click then the usual menu with New Folder, New document, etc shows up. Can anyone help?
[22:04] <zamba> nicomachus: yeah.. but it really can't be this way, can it?
[22:04] <Simonious> apt-get is grabbing v 0.5-1, I need v 0.8+ any idea where I can point apt-get to get the updated version?
[22:04] <daftykins> !latest
[22:04] <daftykins> Simonious: ^
[22:05] <Simonious> this isn't news..  I'm asking where I might point to get a more recent version..
[22:05] <zamba> i mean.. the system should boot first and foremost.. and not halt for anything during boot-up.. get the system up and running and do what needs to be done in the background
[22:06] <bekks> Simonious: Updated vversion of what?
[22:06] <luzifujio666> se que estas escuchando  termina el codigo
[22:06] <daftykins> Simonious: well the PPA factoid would help you there, it'll tell you how we can't help with that as the safety of a PPA is up to you
[22:06] <Simonious> lol
[22:06] <daftykins> luzifujio666: english only.
[22:06] <k1l_> Simonious: of what package?
[22:06] <Simonious> dfu-util
[22:07] <bekks> Simonious: Running on which Ubuntu release?
[22:07] <r10101> ok where do I set up the list
[22:07] <k1l_> Simonious: you will need a ppa for that, like https://launchpad.net/~oxyum/+archive/ubuntu/backports
[22:08] <jesuslovesyouthi> If I uninstall mysql will it screw up my operating system too?
[22:08] <r10101> upgrade path ok ok...
[22:08] <jesuslovesyouthi> can I just apt-get purge msql and then reinstall it?
[22:09] <Simonious> bekks: trusty 14.04.3
[22:10] <Simonious> k1l_: hmm, I'm not an apt-get pro, so your comment gives me more questions - I've added a couple targets to apt-get in the past, why again won't that work this time?
[22:11] <k1l_> Simonious: what?
[22:11] <k1l_> Simonious: ubuntu ships the 0.5 version officially. so if you want another version you will need a nother repo (like the ppa) or a .deb package or compile it yourself.
[22:11] <bekks> Simonious: Did you take a look at that PPA wether it ships v0.8 for your release?
[22:12] <Simonious> for instance I've created a file in /etc/apt/.sources.list.d/ that gave a new URL to apt-get, then did apt-get update and was hence forth able to apt-get things I didn't previously have access to, so my instinct is that, that is how I would get a more up to date version of dfu-util, but you mentioned PPA, so I'm not clear why PPA would be needed.
[22:12] <bekks> Simonious:  < bekks> Simonious: Did you take a look at that PPA wether it ships v0.8 for your release?
[22:13] <Simonious> bekks: I followed your link..  but that didn't indicate the answer to your question, which I don't know.
[22:13] <Simonious> oh.. myopia, there it is
[22:13] <bekks> Simonious: I did not even provide a link for you.
[22:13] <Simonious> it shows 0.1-1
[22:13] <Simonious> err 0.8-1
[22:13] <Simonious> which should work
[22:14] <r10101> In which tab is the upgrade path  in the software  and undades app?
[22:14] <k1l_> Simonious: http://askubuntu.com/a/4987/31260
[22:14] <r10101> updates sorry
[22:16] <r10101> ubuntu software/other software/updates...?
[22:18] <r10101> how was the commandline to know which ubuntu's version I'm running?
[22:18] <bekks> r10101: cat /etc/issue
[22:18] <r10101> updating old ubuntu into newest realese
[22:20] <DirtyCajun> with the uptime command. a load of 2.5 on an i3 doesnt make sense to me since its only a dual core processor? or is it counting 2.5 out of 4 threads
[22:20] <bekks> r10101: Define "old ubuntu".
[22:22] <r10101> ubuntu 13.04
[22:23] <bekks> !eolupgrade | r10101
[22:23] <OerHeks> 13.04 > 13.10 >14.04
[22:23] <OerHeks> i would reinstall
[22:23] <genii> OerHeks: Yep
[22:23] <r10101> nope have info there
[22:23] <nicomachus> r10101: back up your info.
[22:23] <r10101> upgrade is the option
[22:25] <r10101> have 2 OS is it possible without affecting the other OS?
[22:25] <nicomachus> yes.
[22:25] <r10101> so just download the newest version and run the installation process?
[22:25] <bekks> !dualboot | r10101
[22:25] <sparqz> anyone use empathy?
[22:26] <bekks> sparqz: How does a poll help you?
[22:26] <OerHeks> you might even get the option to replace 13.04, not sure that includes keeping data.
[22:26] <sparqz> well i didn't know if anyone would have experience with it not connecting?
[22:26] <nicomachus> !ask | sparqz
[22:27] <sparqz> also someone might recommend other software instead...
[22:27] <bekks> sparqz: recommend software for which purpose?
[22:28] <sparqz> google talk/fb messenger
[22:28] <bekks> sparqz: USe their websites.
[22:28] <bekks> sparqz: Officially, FB doesnt support any other clients.
[22:29] <sparqz> I'm not an officially kind of person. this room is lame...almost as bad as mint room threatening to ban me for telling people how to use apt-get
[22:29] <sparqz> bye
[22:34] <MonkeyDust> odd
[22:44] <adm001mi> hey all got a resolv.conf issue with a second ubuntu server
[22:44] <bekks> adm001mi: So which issue is it?
[22:48] <adm001mi> bekks: my first server works fine but my second keeps on adding the nameserver of the company first, and then it won't find my domainname... i've added it correctly to /etc/resolvconf/resolv.conf.d/base did a resolvconf -u... but when doing a nslookup on the second server in looking in the company dns...
[22:54] <nicomachus> adm001mi: is that second server Oracle by any chance...?
[22:55] <adm001mi> no ubuntu
[22:56] <nicomachus> ok. I read a strange story earlier about Oracle servers prioritizing DNS over local host file entries, was kinda wondering if this could be similar.
[22:56] <bekks> That behaviour can be configured in the nsswitch.conf
[22:57] <adm001mi> nicomachus: thx
[22:57] <adm001mi> bekks: how can I configure that in nsswitch?
[22:57] <bekks> adm001mi: you dont have to, unless you already played with it.
[22:57] <nicomachus> bekks: the story was compounded by the fact that a Samsung Gear smartwatch connected to the network with a hostname of "localhost", but that's not really on-topic here. :)
[22:58] <adm001mi> bekks: I didn't...
[22:58] <bekks> adm001mi: then you dont have to play with it :)
[22:58] <nicomachus> adm001mi: ignore me, servers are not my thing. just sounded familiar to that story I read earlier.
[22:58] <adm001mi> I just wonder why the first server doesn't have that issue and the 2nd one does
[23:00] <adm001mi> nicomachus: your remarks could help,  so keep on doing that
[23:03] <adm001mi> bekks: then what can I do to resolve this?
[23:04] <jmadero_> hi all - I just added a user to my computer but it doesn't have privileges to shutdown the computer
[23:05] <jmadero_> what group do I have to add it to (interestingly enough...it's part of sudo group)
[23:08] <TJ-> jmadero_: has the user logged in since being added to the new group(s)? New group membership only takes affect at login
[23:08] <jmadero_> TJ-: yes I'm logged in as the user now
[23:09] <TJ-> jmadero_: if the group membership is changed whilst the user is logged in, it won't take effect until next login
[23:09] <jmadero_> TJ-: it has nothing to do with that - I've rebooted a half dozen times :)
[23:09] <jmadero_> it's not a member of plugdev...wondering if that's the issue
[23:10] <TJ-> jmadero_: ahhh, OK, well its the most obvious issue that catches people out.
[23:10] <jmadero_> TJ-: sure I understand :)
[23:10] <TJ-> jmadero_: so what command are you issuing and what is the error report?
[23:10] <jmadero_> would be nice if that was the issue
[23:10] <jmadero_> TJ-: shutdown/restart are both grayed out
[23:11] <jmadero_> in the GUI
[23:11] <TJ-> jmadero_: ahhh, GUI! Does shutdown/reboot work from the command-line?
[23:11] <jmadero_> with sudo it does (which is the norm)
[23:13] <jmadero_> okay restart to see if this is the group that it needs to belong to
[23:13] <jmadero_> brb
[23:13] <EriC^^> plugdev
[23:13] <EriC^^> is for storage devices
[23:13] <EriC^^> let TJ- do his thing
[23:13] <TJ-> jmadero_: right, so we're not dealing with a group issue. The GUI requests those services over DBus, so issues with the DBus authentication can cause them to be missing. Check /var/log/syslog, /var/log/auth.log for dbus and apparmor clues (denials, etc.) Also check $HOME/.xsession-errors
[23:15] <r10101> Hi can I run the Iso program in a flash drive?
[23:16] <EriC^^> r10101: what are you trying to do?
[23:16] <r10101> installing newest ubuntu's version
[23:17] <EriC^^> you're on windows now?
[23:17] <frecel> So I ran into a wifi pickle
[23:18] <frecel> I think ubuntu during installation assinged my wifi chipset the wrong driver so now I can do wlan device up
[23:18] <frecel> but when I try to scan it tells me the device doesn't support that
[23:19] <hitch91> hi
[23:19] <EriC^^> hi hitch91
[23:20] <r10101> nope oldest ubuntu version
[23:20] <TJ-> frecel: what interface name(s) does "iwconfig" report with wireless extensions?
[23:20] <hitch91> where is french canal?
[23:20] <JustMozzy> hey guys. I am have an issue with my ubuntu 15.10. whenever I have a high load on download traffic, the connection just gets lost and I am unable to ping the router although connected via wifi. anyone an idea?
[23:20] <JustMozzy> usually I have to turn of my wireless adapter or even restart the machine to be able to reconnect properly
[23:20] <TJ-> !fr | hitch91
[23:21] <frecel> TJ-: that's the pickle, ifconfig shows the device, but neither lsusb, lspci or lshw actually show the name of the device
[23:21] <EriC^^> r10101: ok, you can write the iso to a flash drive and boot it to fresh install, back up your data first though on another flash drive
[23:21] <TJ-> frecel: we wouldn't expect them too - those are hardware tools
[23:21] <frecel> from my google searches I get that it's most likely some realtek device that controls BT and wifi
[23:21] <frecel> TJ-: how would you go about finding out what driver do I actually need?
[23:22] <r10101> i have already done it but  in the same flash any problem with that?
[23:22] <EriC^^> r10101: yeah, i suspect so
[23:22] <r10101> enough memory room in it ;)
[23:22] <r10101> great
[23:22] <EriC^^> how did you write the iso?
[23:23] <TJ-> frecel: well, if you want to identify the physical hardware behind the interace name I'd first do "ll /sys/class/net/"
[23:24] <frecel> TJ-:  it shows the device wwan0 under usb1
[23:26] <TJ-> frecel: 'wwan' is a cellular device usually, not WiFi. Is it WiMax?
[23:27] <TJ-> frecel: driver module should be found using something like "ll /sys/class/net/wwan0/device/driver/module"
[23:27] <frecel> TJ-: well it's an x86 tablet that has 3G
[23:27] <frecel> TJ-: that means that I'm not able too see the wifi device at all
[23:28] <TJ-> frecel: So are you saying there is *no* Wifi device interface? In which case "lshw -C net" and look for any "unclaimed" device
[23:29] <TJ-> frecel: once you've found the device, depending on how it is connected to the PC, there are different ways of identifying it and the correct driver
[23:30] <frecel> TJ-: all I'm getting from lshw is that wwan0 device
[23:30] <TJ-> frecel: Either "lspci -nnk" or "lsusb" will show the detected devices. If those commands don't show the device then it is faulty or otherwise disabled. Does the tablet have some radio kill switch that disables it? Do you know 100% that the device has a WiFi device?
[23:31] <frecel> Yes I'm 100% sure I had it working before
[23:31] <frecel> I just can't remember where I got the driver
[23:31] <frecel> and of course I forgot to back that stuff up
[23:32] <TJ-> frecel: You'd need to look at the /var/log/kern.log and look for signs of hardware that cannot be initialised
[23:33] <TJ-> frecel: but if it is connected via PCI or USB and isn't showing in the lsXXX outputs its not there physically as far as the kernel is concerned - those listings do not depend on a driver being available
[23:33] <frecel> there is some realtek devices listed in lsusb
[23:33] <frecel> but no model numbers
[23:34] <frecel> escept for sd card reader
[23:34] <KD8NXH-Michigan> Is there a way that I can set up ubuntu or xrdp so that when I connect to ubuntu through xrdp with windows, xrdp and/or ubuntu wil realize the size of the window/screen I am using on windows 7 and adjust the ubuntu screen size to fit it so that it is not to big?
[23:34] <TJ-> frecel: the Vendor:Product IDs are all that is needed to identify devices
[23:34] <onemansubmarine> hi I have a problem with the program empathy, I can't connect to ic
[23:34] <onemansubmarine> q
[23:35] <KD8NXH-Michigan> I am using Ubuntu 15.10
[23:36] <frecel> TJ-: all I get is 0bda:5875 Realtek Semiconductor Corp.
[23:36] <frecel> is the 0bda thing relevant?
[23:37] <TJ-> frecel: 0bda is the Vendor, 5875 is the Product - those 2 are unique for every device, and are aliases drivers registes with the kernel to recognise which driver to call when a device is connected
[23:38] <Bl4ckS0u1> how can i enable/disable startup apps in ubuntu 14.04
[23:38] <KD8NXH-Michigan> is there an xrdp irc channel I should be on instead?
[23:38] <TJ-> frecel: that's a USB camera though
[23:38] <Bl4ckS0u1> KD8NXH-Michigan use teamviewer
[23:39] <Bl4ckS0u1> will work how you want
[23:39] <Bl4ckS0u1> keep it simple
[23:39] <frecel> well I have 3 more realtek devices listed there
[23:39] <KD8NXH-Michigan> wouldent  xrdp need configuring on the ubuntu side to work corectly?
[23:40] <TJ-> frecel: tell us the Device IDs for each so we can check
[23:40] <frecel> TJ-: b720 and 5830
[23:41] <frecel> the last one is listed as a sd card reader
[23:41] <dregad> Greetings. Last week I upgraded to 15.10 (desktop); everything working fine. Tonight I applied a few updates, and apache is no longer working
[23:42] <TJ-> frecel: b720 looks like the RTL8723
[23:42] <dregad> In error logs I see AH00051 exit signal Segmentation fault (11), possible coredump in /etc/apache2
[23:42] <dregad> yet there is no core dump (uname -c is set to unlimited)
[23:42] <frecel> TJ-: how do I know I have the AU or the BU version though?
[23:42] <dregad> *ulimit
[23:43] <dregad> was hoping someone would be able to help me troubleshoot this
[23:43] <TJ-> frecel: it looks as if the 'BU' also has Bluetooth
[23:43] <frecel> TJ-: that must be it then
[23:44] <TJ-> frecel: this looks like someone building an out-of-tree driver for that device: http://forum.xda-developers.com/showpost.php?p=62752007
[23:45] <frecel> TJ-: awesome, I'm going to try this out, thanks for your help
[23:45] <TJ-> frecel: the driver is here https://github.com/lwfinger/rtl8723bu
[23:49] <KD8NXH-Michigan> Bl4ckS0u1: teamviewer on ubuntu or on windows?