| aotea | So, once again I've started suffering GPU falling off the bus, any chance installing wine-1.9.0 might have something to do with that seeing it's the only thing I've installed this time since issues started. Running with Nvidia 340 drivers, nvidia-prime and performance mode set in settings. | 00:00 |
|---|---|---|
| lustic | I found a solution, File> open url, and paste magnet link adress into it | 00:01 |
| daftykins | aotea: maybe, two ways to find out - 1) remove it 2) boot a live session | 00:02 |
| S_J | http://lpaste.net/148068 | 00:05 |
| S_J | i cant connect to the esp8266 it says | 00:05 |
| S_J | the pow er LED is on. i connect rx to tx and tx to rx. used this setup but with the 8 pin board: http://esp8266.github.io/Arduino/versions/2.0.0/doc/ESP_improved_stability.png | 00:06 |
| ikonia | how is this an ubuntu issue ? | 00:06 |
| S_J | sorry wrong chan | 00:06 |
| daftykins | S_J: sounds more like a failure to connect to the device at the other end you're trying to flash | 00:06 |
| daftykins | yeah you're right there ;) | 00:07 |
| lustic | When plugging in my Android Device, it mounts, I can see the folder on my Computer, However I cannot see the files within them, eg. music etc Any solutions? | 00:13 |
| daftykins | did you unlock the device? | 00:14 |
| daftykins | some hide content 'til you permit it to be seen | 00:14 |
| genii | daftykins: I have this exact same issue on my Samsung, it's due in that case to bad MTP implementation on Samsung's part | 00:15 |
| maddawg2 | same issue on my galaxy | 00:16 |
| daftykins | genii: :( | 00:16 |
| maddawg2 | stuck using bluetooth for file transfering | 00:17 |
| genii | Yep | 00:17 |
| maddawg2 | galaxy s5 | 00:17 |
| genii | Or just email it to yourself | 00:17 |
| maddawg2 | to be off topic for a sec... i just survived a really bad car wreck | 00:17 |
| maddawg2 | like REALLY REALLY bad | 00:17 |
| maddawg2 | car flipped | 00:17 |
| ikonia | maddawg2: don't be | 00:17 |
| ikonia | we don't want to know in here | 00:18 |
| maddawg2 | too late | 00:18 |
| maddawg2 | sorry | 00:18 |
| ikonia | please stop then, and don't do it in future | 00:18 |
| ikonia | no problem | 00:18 |
| nicomachus | genii maddawg2, even with developer tools and usb debugging enabled? That's the only way to get my HTC to work. | 00:19 |
| maddawg2 | si | 00:19 |
| maddawg2 | at least for me | 00:19 |
| genii | nicomachus: I've tried many things and none worked, unfortunately | 00:19 |
| maddawg2 | i thought maybe it was a filesystem issue | 00:20 |
| daftykins | get ESFile Explorer instead, direct samba mounting :> | 00:20 |
| maddawg2 | cuz it works in windows | 00:20 |
| genii | lustic: Is it some Samsung? | 00:20 |
| lustic | Genii yes galaxy s4 | 00:21 |
| lustic | genii, yes galaxy s4 *** | 00:21 |
| maddawg2 | upgrade | 00:21 |
| maddawg2 | lol | 00:21 |
| maddawg2 | the S5 is much better | 00:21 |
| genii | lustic: Yeah, I don't hold out much hope for getting it to work then, unfortunately | 00:21 |
| maddawg2 | i've not been happy with the last 2 versions of ubuntu | 00:22 |
| maddawg2 | even on fresh installs i keep getting system errors | 00:22 |
| maddawg2 | just randomly | 00:22 |
| maddawg2 | and wants e to send error reports | 00:23 |
| maddawg2 | me* | 00:23 |
| nicomachus | maddawg2: when that happens, grab the log and bring it here... | 00:23 |
| maddawg2 | will do | 00:23 |
| daftykins | LTS is best | 00:24 |
| maddawg2 | it's running as a VM | 00:24 |
| maddawg2 | i only use LTS | 00:24 |
| daftykins | virt tech likely to blame then if outdated | 00:24 |
| maddawg2 | vmware esxi 5.5 | 00:24 |
| lustic | * shoots himself* | 00:25 |
| daftykins | proprietary, so not interested :) | 00:25 |
| maddawg2 | ubuntu 14.04LTS | 00:25 |
| maddawg2 | interestingly happens on my dell as well | 00:25 |
| maddawg2 | tho i used the new open-vm-tools thing | 00:25 |
| maddawg2 | instead of vmware tools for the vm machine | 00:26 |
| === m1dnight1 is now known as m1dnight_ | ||
| === DK_ is now known as DonKee | ||
| goddard | anyone know how to get the global menu working on a self-compiled firefox install? | 01:00 |
| ikonia | ask firefox/mozilla support | 01:01 |
| ikonia | or just use the ubuntu packages | 01:01 |
| DalekSec | Grab the patch that's in Ubuntu's firefox? | 01:01 |
| goddard | ikonia: it is an ubuntu specific patch | 01:08 |
| ikonia | right | 01:09 |
| goddard | DalekSec: how do i do that? | 01:09 |
| ikonia | but you're not using the source that patch was built for | 01:09 |
| ikonia | you're using a different version | 01:09 |
| goddard | ikonia: if i can get the patch i can see the modifications and i can make sure it works | 01:09 |
| ikonia | then look in the ubuntu package | 01:09 |
| goddard | make build it into a script | 01:10 |
| ikonia | build a script ? | 01:10 |
| goddard | ikonia: yeah but i dont know what i am looking for and it is huge | 01:10 |
| ikonia | just build a PPA | 01:10 |
| ikonia | goddard: you'll have to audit ALL the patches | 01:10 |
| ikonia | see what you need/don't need | 01:10 |
| ikonia | a lot is covered in the change log in the package | 01:10 |
| goddard | ikonia: ok where are they? in the source package? | 01:10 |
| ikonia | yes | 01:10 |
| goddard | so debs have a patch directory ? | 01:11 |
| DalekSec | Of course, apt-get source firefox, but that'll get the version that's been released for your system. | 01:11 |
| goddard | right | 01:11 |
| ikonia | goddard: what's your actual goal here ? | 01:11 |
| goddard | learn | 01:11 |
| ikonia | why can you not use the ubuntu packages or the firefox PPA ? | 01:11 |
| goddard | just want to learn | 01:12 |
| ikonia | I'd suggest a simpler package than firefox | 01:12 |
| ikonia | for a learning exercise | 01:12 |
| goddard | ikonia: ive already built the kernel and added patches | 01:12 |
| ikonia | so ? | 01:12 |
| goddard | cant be much harder then that | 01:12 |
| goddard | firefox is put together very well | 01:13 |
| ikonia | typing patch -Np1 is quite different than actually doing it properly | 01:13 |
| goddard | all the more reason to learn | 01:13 |
| ikonia | right, which is why I suggest a simpler software product to learn | 01:14 |
| goddard | sorry i dont want to do another project | 01:14 |
| ikonia | up to you, it's not really on topic for this channel | 01:14 |
| goddard | ikonia: so building ubuntu software isn't a topic for this channel? | 01:14 |
| ikonia | no | 01:14 |
| ikonia | because you're not building ubuntu software | 01:14 |
| goddard | haha ok | 01:14 |
| ikonia | you're just compiling stuff for yourself | 01:14 |
| ikonia | which actually puts your system at risk | 01:15 |
| goddard | ikonia: sure bud | 01:15 |
| neredsenvy | Is it possible to create a folder as or for www-data | 01:15 |
| ikonia | as you're overwrite ubuntu components | 01:15 |
| goddard | ikonia: no you wont | 01:15 |
| neredsenvy | outright without doing changegroups etc.. | 01:15 |
| goddard | ikonia: but dont worry about it | 01:15 |
| ikonia | I'm not | 01:15 |
| goddard | ikonia: haha | 01:15 |
| goddard | ikonia: you should take a break man | 01:16 |
| ikonia | ? | 01:16 |
| goddard | you seem tense | 01:16 |
| ikonia | not at all | 01:16 |
| goddard | very aggressively trying to make people do what you want them to do | 01:16 |
| ikonia | not at all | 01:16 |
| ikonia | as I said "up to you" | 01:16 |
| goddard | "up to you" but "get out of the channel unless you do it my way" | 01:17 |
| goddard | pretty clear | 01:17 |
| ikonia | nope | 01:17 |
| goddard | ikonia: you are really helpful all the time | 01:17 |
| goddard | you have helped me alot | 01:17 |
| goddard | thanks man | 01:18 |
| lustic_ | im trying to change my device name, gksu wont open hosts, any solution? | 01:21 |
| ikonia | lustic_: what exactly are you typing ? | 01:21 |
| lustic_ | ikonia, gksu gedit /etc/hosts | 01:22 |
| ikonia | lustic_: and what error are you getting ? | 01:22 |
| lustic_ | ikonia, it does abolutely nothing, but i guess i didnt have gedit installed :P bahaha brb | 01:23 |
| nrdb | I notice that when my phone is pluged into my laptop the laptop monitors the state of charge of the phones battery, does anyone know what protocol is used to do this? | 01:30 |
| bubbyroller2000 | nrdb - I think it is down to the API and not a specific protocol | 01:35 |
| === Monthrect is now known as Piper-Off | ||
| leftist | evening. i'm running ubuntu with xfce and i wanted to run compiz. i cant recall if i ever ran compiz in xfce, is it possible or do i need to switch to another window manager? | 01:39 |
| xangua | leftist: yes, you need another window manager, compiz decorator comes with compiz | 01:42 |
| leftist | ok thought so xangua. | 01:43 |
| xangua | Gtk window decorator * | 01:43 |
| leftist | thanks xangua | 01:43 |
| xangua | http://wiki.compiz.org/Decorators/GTKWindowDecorator | 01:44 |
| leftist | thanks xangua | 01:46 |
| dav | hola | 01:50 |
| dav | álgunas páginas recomendadas para aprender a utilizar unbuntu mate | 01:50 |
| raspberrypifan | busca en google no mas | 01:50 |
| Jef91 | I am building a deb package for a C application. Does anyone know of a good guide for getting a second package containing debug symbols built separate from my main package? | 01:52 |
| OerHeks | This document describes how to set up the debugging symbol packages ( *-dbg.deb and *-.dbgsym.ddeb ). https://wiki.ubuntu.com/Debug%20Symbol%20Packages | 01:53 |
| Jef91 | OerHeks, perfect. Thank you | 01:54 |
| OerHeks | have fun | 01:54 |
| Jef91 | OerHeks, err thats not exactly what I'm looking for | 01:54 |
| Jef91 | I'm creating my own debian packages | 01:55 |
| Jef91 | and want to generate mypackage-dbg.deb | 01:55 |
| Jef91 | alongside mypackage.deb | 01:55 |
| trism | Jef91: https://wiki.debian.org/DebugPackage | 01:56 |
| OerHeks | pkg-create-dbgsym i think | 01:56 |
| Jef91 | trism, this looks helpful. Thanks. Need to remember to check the debian wiki | 01:57 |
| OerHeks | !info pkg-create-dbgsym | 01:57 |
| ubottu | pkg-create-dbgsym (source: pkg-create-dbgsym): automatically build debug symbol ddeb packages. In component main, is extra. Version 0.69 (wily), package size 8 kB, installed size 68 kB | 01:57 |
| === chalcedony is now known as chal2 | ||
| === chal2 is now known as chalcedny | ||
| waters33637 | anyone got a sec to help setup openvpn on ubuntu? | 02:17 |
| seaking | hi, i am having troubles understanding the so called "SSH Authentication" in Remmina Remote Desktop Client | 02:18 |
| seaking | (for VNC) | 02:18 |
| waters33637 | seaking .. what's your question | 02:18 |
| seaking | when i try to connect it will ask for a password for the a username, which i think is for the server. when i give it it says "Failed to bind on local port." | 02:20 |
| gagalicious | i installed ubuntu on my workstation with raid card and used software raid1 on them. i tried to dd clone my disk but when i boot with the new combination, it reads /dev/disk/uuidnnnnnn is not found. and when i put back the original and checked my fstab, it has UUID for / etc. how can i clone and use without issues? | 02:20 |
| === ping is now known as Guest3033 | ||
| waters33637 | VNC ... Remote Desktop .. Lots of times has a single password to login to the desktop | 02:21 |
| waters33637 | are you on two nix machines? | 02:22 |
| waters33637 | or do you use putty? | 02:22 |
| showaz | VNC slow, xpra better over ssh | 02:22 |
| seaking | client:linux server:linux/RPi | 02:24 |
| waters33637 | nice ... | 02:24 |
| waters33637 | can u ssh into the Pi ? | 02:25 |
| seaking | yes i can, with terminal | 02:25 |
| daftykins | binding on a local port means it's trying to make use of a port <1024 on the host you're running it on, so likely it wants root for whatever reason to run | 02:26 |
| seaking | firewall? | 02:26 |
| LaserAllan | Hey there, I have recently bought a WIndows laptop that I want to run dualbooting on but I am unsure if I can run dual booting with linux on it since it comes with a windows recovery partition | 02:26 |
| waters33637 | ssh -L | 02:27 |
| waters33637 | the -L option? | 02:27 |
| seaking | well i am aware of "ssh -X 192.168.0.ip -l pi" | 02:28 |
| pondo | help | 02:29 |
| * seaking lol | 02:29 | |
| seaking | pondo help with what? :P | 02:30 |
| pondo | i have a audio virous | 02:30 |
| seaking | can u please explain more detailed ? | 02:30 |
| waters33637 | ssh -L 5901:127.0.0.1:5901 -N -f -l exampleuser ip_address | 02:30 |
| waters33637 | Then connect to localhost:5901 via a VNC viewer such as TightVNC. | 02:31 |
| bubbyroller2000 | LaserAllan you can resize the partition during install - alternatively you could use a Virtual Machine and run Linux through that | 02:32 |
| seaking | waters33637: for the pi? > ssh -L 5901:127.0.0.1:5901 -N -f -l exampleuser ip_address | 02:32 |
| waters33637 | no .... | 02:32 |
| pondo | Every now and then it playes a tune ... dit du dit and repeats it . | 02:32 |
| waters33637 | first establish an SSH tunnel | 02:32 |
| LaserAllan | bubbyroller2000: But when i install GRUB won't it overwrite the act that uo cna use F7 in windwos to then recover windows so to speak?, whgat good would it do to resize the partition?, and runnig it in vm sure, but I kinda want to use Linux over windows for everythign else except gaming | 02:33 |
| waters33637 | putty for the client side ... even on linux ... might be an easy option | 02:34 |
| LaserAllan | Windows has a sad tendency to overtime slowdown quite significantly | 02:34 |
| Legi0n | How do I set myself as owner? I'm really hating entering passwords every 4.8 seconds or having to open up the terminal for simple drag and drops. | 02:36 |
| bubbyroller2000 | GRUB will be your main bootloader - it gives you the option to load from either windows or linux. Resizing the partition will allow you to free up some space to install linux alongside windows. The recovery partition will still be there - you are basically making the main windows partition smaller, then creating a new partition to install linux | 02:37 |
| Legi0n | I'm on lubuntu | 02:37 |
| Legi0n | If that helps | 02:37 |
| Legi0n | Putting myself in the sudo group isn't enough. There files in the main folder / that I need to work with, and I'd like to save myself hours and avoid using the terminal. | 02:39 |
| slidinghorn | Legi0n: what exactly are you trying to edit? | 02:39 |
| Legi0n | I'm trying to paste files into, and cut files out of, etc. | 02:40 |
| Legi0n | Super simple flicks of a wrist. | 02:40 |
| Legi0n | lol | 02:40 |
| Legi0n | But I keep getting "Permission Denied" even being in the sudo group as administrator. | 02:41 |
| Legi0n | Is there not a way to just make myself owner? | 02:42 |
| Legi0n | 'cause I am... the owner. lol | 02:42 |
| Bashing-om | Legi0n: No, root is the owner. Security is a linux strong point . See: https://help.ubuntu.com/community/RootSudo . | 02:44 |
| TechnoCrunch | Hi | 02:44 |
| bubbyroller2000 | Legi0n, try sudo - s or poss chmod the read write permission | 02:44 |
| Legi0n | Thanks! I overlooked root in there lol | 02:44 |
| winsoff | Does the LiveCD for ubuntu 15.10 have more than one boot option? | 02:45 |
| TechnoCrunch | Does anyone here have a Macbook pro 5,1? | 02:45 |
| bubbyroller2000 | winsoff, yes it has boot as live cd or install right away | 02:45 |
| winsoff | bubbyroller2000, I need the livecd to only have one boot option for this old Macbook 2,1. | 02:47 |
| winsoff | How do I do that? | 02:47 |
| winsoff | Preferably just the install. | 02:47 |
| Bashing-om | winsoff: Yeah, will boot in the method you set in the firmwear, The live environment will boot either Legacy or UEFI if the system si EFI capable. | 02:48 |
| winsoff | Bashing-om, I think the problem is that the processor is 64-bit, the OS is 64-bit, but the bootloader/bios is 32-bit. | 02:49 |
| winsoff | I just need to strip it down to only have one boot option, so that the bug I am getting--which is a freeze during boot from the install disk with no input possibilities--will be impossible to encounter. | 02:50 |
| Bashing-om | winsoff: I know not Mac, but 32 bit operating system will run fine on 64 bit hardware . | 02:50 |
| winsoff | I plan to install a 64-bit version of ubuntu on it. | 02:51 |
| Bashing-om | !mac | winsoff | 02:51 |
| ubottu | winsoff: For help on installing and using Ubuntu on a Mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages | 02:51 |
| Legi0n | Hmmm... It looks as though setting myself as root doesn't save. Any suggestions? | 02:52 |
| winsoff | See, I tried that stuff, and still have problems. | 02:52 |
| winsoff | I will try again. | 02:52 |
| Bashing-om | winsoff: I am sure there are those here who are Mac literate . Wait for their advise . | 02:53 |
| winsoff | Indeed. Thank you for your eagerness. | 02:53 |
| Vyse007 | Would anyone be willing to help me with a Kubuntu problem? The #kubuntu channel seems empty. | 02:56 |
| Bashing-om | !ask | Vyse007 Kubuntu is supported here too | 02:57 |
| ubottu | Vyse007 Kubuntu is supported here too: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience | 02:57 |
| Vyse007 | I am having this weird kwin dialog hang every now and then with Kubuntu 15.10 (http://imgur.com/oRAbQET) | 02:57 |
| Vyse007 | The dialog seems to be stuck there, and after about 30 seconds or so, starts displaying and behaving correctly. | 02:58 |
| Vyse007 | While it's being displayed this way, however, I can't close it at all; I can only move it around. | 02:58 |
| Vyse007 | The only way to close it is to kill it from the terminal. | 02:58 |
| Vyse007 | Tried searching kde bugzilla, but it returns a ton of results, and I am not really sure on how to describe this issue. | 02:59 |
| sebb77 | help, i have erased my previous version of ubuntu and the installation failed now i am running a lubuntu livecd and it doesnt let me install it it says the creation of swap space in partition 3 SCSI1 sda0 failed | 03:09 |
| sebb77 | i cant close it and reattempt | 03:09 |
| sebb77 | what should i do | 03:09 |
| sebb77 | brb | 03:10 |
| john__ | hello | 03:16 |
| john__ | can some one give me an idea as to what channel to go to , for help on python | 03:16 |
| john__ | i have two books python for the absolute beginner and more python for the absolute beginner | 03:16 |
| john__ | i just took a class in C++ on windows | 03:17 |
| somsip | john__: #python | 03:17 |
| john__ | so i understand using code-blocks ide and some logic as to starting to program | 03:17 |
| somsip | john__: it's not something to discuss here | 03:17 |
| john__ | i went to channel #python | 03:18 |
| john__ | and it wont let me talk | 03:18 |
| somsip | !registar | john__ | 03:18 |
| somsip | !register | john__ | 03:18 |
| ubottu | john__: Information about registering your nickname: https://help.ubuntu.com/community/InternetRelayChat/Registration - Type « /nick <nickname> » to select your nickname. Registration help available by typing /join #freenode | 03:18 |
| john__ | !registrar | mulligan | 03:20 |
| john__ | ?? | 03:20 |
| === john__ is now known as mulligan | ||
| mulligan | is a password required to keep my name on xchat | 03:21 |
| johefernan | ¬_¬ | 03:22 |
| === john__ is now known as mulligan | ||
| === rikonor is now known as poopieheadtomato | ||
| Taco__ | Can someone link to me a resource to install GNOME on ubuntu 14.04? | 03:40 |
| Taco__ | I haven't found what I'm looking for and tried to get GNOME from software centre | 03:40 |
| somsip | !info gnome-desktop | Taco__ | 03:41 |
| ubottu | Taco__: Package gnome-desktop does not exist in wily | 03:41 |
| somsip | !info gnome-session | Taco__ | 03:41 |
| ubottu | Taco__: gnome-session (source: gnome-session): GNOME Session Manager - GNOME 3 session. In component main, is optional. Version 3.16.0-1ubuntu2 (wily), package size 10 kB, installed size 249 kB | 03:41 |
| somsip | Taco__: ^^^ that one | 03:41 |
| Taco__ | Thank you! | 03:42 |
| linux_nub_94 | hi there, I'm trying to install ubuntu onto a seperate SSD on my windows pc but running into some issues, is this the right channel to ask for help? | 03:42 |
| somsip | !info gnome-session-fallback | 03:42 |
| ubottu | Package gnome-session-fallback does not exist in wily | 03:42 |
| === bderagon is now known as codencrazy | ||
| Jonii^ | Hello. I'm trying to get wireless connection working on my ubuntu. I have atheron qualcomm wlan thingie, within Lenovo Yoga laptop | 03:48 |
| codencrazy | I'm a moderately experienced linux user, but having a hard time getting my 2nd monitor configured | 03:48 |
| === learnit_ is now known as learnit | ||
| === Konqi is now known as Blupanda | ||
| Jonii^ | I asked this question while I'm reading this: https://sites.google.com/site/easylinuxtipsproject/internet Because of no internet connection, the first item on the list is surprisingly difficult to accomplish | 03:51 |
| cfoch | how can I know who is the author of certain installed package? | 03:51 |
| somsip | cfoch: you could check launchpad.net to see who the maintainer is | 03:52 |
| cfoch | I htought there was a simplemagic command | 03:53 |
| cfoch | has someone used arcanist here? | 03:55 |
| somsip | !info arcanist | 03:55 |
| ubottu | arcanist (source: phabricator): Command line interface for Phabricator (review platform). In component universe, is optional. Version 0~git20150803-1 (wily), package size 376 kB, installed size 2355 kB | 03:55 |
| codencrazy | cfoch, we use arcanist at work every day, whats up? | 03:56 |
| ElTimo | Ok, I just screwed up my partition table, but I haven't rebooted yet and it's my root drive. What can I do? | 03:56 |
| ElTimo | Everything is still intact until I reboot. | 03:56 |
| codencrazy | I suggest you don't reboot :) lol | 03:57 |
| ElTimo | lol | 03:58 |
| cfoch | codencrazy: do you use it in git-phab? | 03:59 |
| cfoch | !help ubottu | 04:01 |
| * cfoch thought that would list me the commands that the bot accepts | 04:02 | |
| somsip | !brain | cfoch | 04:04 |
| ubottu | cfoch: Hi! I'm #ubuntu's favorite infobot, you can search my brain yourself at http://ubottu.com/factoids.cgi | Usage info: http://ubottu.com/devel/wiki/Plugins | Bot channels and general info: https://wiki.ubuntu.com/IRC/Bots | Make a clone of me: /msg ubottu botclone | 04:04 |
| Jef91 | So I'm trying to compile a debian package from C source. I see the source compile, but at the end of the compile none of the compiled files are added to the debian package. Just docs are contained with in it. Any idea what I might be doing wrong? | 04:04 |
| somsip | Jef91: this is ubuntu. Try asking in #debian | 04:06 |
| TechnoCrunch | Um I don't have a Xorg config file but when I try to go into ctrl+alt+f1 all I get is a black screen I also have a nvidia gpu but 2 of them on my macbook pro 5 1 | 04:07 |
| cfoch | does the ubottu stores all the conversation on IRC? | 04:07 |
| somsip | !logs | cfoch | 04:07 |
| ubottu | cfoch: Official channel logs can be found at http://irclogs.ubuntu.com/ . LoCo channels are now logged there too. Meeting logs from meetingology at http://ubottu.com/meetingology/logs/ | 04:07 |
| TechnoCrunch | So I can't create an Xorg file so I can't do anything about my x server | 04:07 |
| cfoch | may I know how much weight is the log of conversation stored in that server? | 04:08 |
| Jef91 | somsip, I asked there as well. Compiling the debian package for Ubuntu. | 04:08 |
| somsip | TechnoCrunch: what is stopping you from creating onw? | 04:08 |
| somsip | cfoch: weight? | 04:08 |
| TechnoCrunch | Shitty closed source Nvidia drivers by the look of it cause that what google says for me | 04:09 |
| somsip | Jef91: you're packaging for Ubuntu? Have you checked the packaging faq? !packaging will show it | 04:09 |
| cfoch | weigh* | 04:09 |
| cfoch | I mean the size of the information there... | 04:09 |
| somsip | cfoch: all of it | 04:09 |
| bderagon | really really struggling getting this second monitor to be recognized, I've reconfigured X, blown away my xorg.conf, the amd driver can see the 2nd monitor, but if I enable it, tells me I need a reboot, its in the xorg.conf, I reboot, and still can't send anything to it for display | 04:10 |
| TechnoCrunch | So my crap nvidia drivers are disabling me to go into ctrl+alt+f1 and kill xorg and create an xorg.config file | 04:10 |
| somsip | TechnoCrunch: does nvidia-settings run? | 04:10 |
| Jef91 | !packaging | 04:10 |
| ubottu | The packaging guide is at http://packaging.ubuntu.com/html/ - See https://wiki.ubuntu.com/UbuntuDevelopment/NewPackages for information on getting a package integrated into Ubuntu - Other developer resources are at https://wiki.ubuntu.com/UbuntuDevelopment - See also !backports and !sponsoring | 04:10 |
| bderagon | it is working, cause I can move my mouse to it, and get a nice X in ubuntu 15.04 here, that tells me I can't do squat with it | 04:10 |
| TechnoCrunch | Yes it does somsip | 04:10 |
| cfoch | somsip? | 04:10 |
| somsip | TechnoCrunch: are you using that to create your xorg.conf? | 04:10 |
| bderagon | so, everything knows its there, I just can't get it to display a frign desktop | 04:11 |
| cfoch | all of it? how much? | 04:11 |
| somsip | cfoch: it collects all irc logs for all channels. | 04:11 |
| somsip | *ubuntu- channels | 04:11 |
| cfoch | what is the size of all that information? | 04:11 |
| somsip | cfoch: it depends how much people talk. Go look. | 04:12 |
| === de-facto_ is now known as de-facto | ||
| TechnoCrunch | somsip, No I'm not using nvidia-settings to generate my xorg.conf but trying to use sudo Xorg configuration to create it | 04:13 |
| bderagon | techno, if you have the nvidia drivers installed, that won't work, they'll overwrite the generated one last I checked | 04:13 |
| somsip | TechnoCrunch: sounds like you have an alternative approach to try then - using the nvidia-settings setup | 04:13 |
| TechnoCrunch | yeah I have that open and allows me to save to a non-existant xorg.conf file | 04:14 |
| somsip | TechnoCrunch: which then makes it exist | 04:15 |
| TechnoCrunch | yas | 04:15 |
| TechnoCrunch | it's there | 04:15 |
| somsip | TechnoCrunch: there is no xorg.conf by default any more | 04:15 |
| TechnoCrunch | thanks for the help somsip | 04:16 |
| bderagon | well, this is awesome, I can get games to use my 2nd monitor through steam, but still can't get the desktop to use it | 04:18 |
| === yan__ is now known as landoceansky | ||
| === physicz_ is now known as physicz | ||
| bderagon | I can even change the resolution of it through xrandr, and watch the resolution change on the monitor; is there some magic trick I'm missing to enable the desktop/show it in the "Displays" settings of ubuntu? | 04:21 |
| free29 | hello there | 04:25 |
| === dan_ is now known as Guest59557 | ||
| Guest59557 | got ubuntu going on ppc | 04:32 |
| Guest59557 | got youtube working on PPC | 04:34 |
| Guest59557 | anyone using ppc | 04:36 |
| TechnoCrunch | Guest59557, what PowerPC? | 04:37 |
| Guest59557 | 15 in aluminum 1.25 gig 2 gig mem | 04:38 |
| somsip | Guest59557: do you have a support question, because this would go better in #ubuntu-offtopic (if it really is about ubuntu) | 04:38 |
| Guest59557 | no happlyly have youtube working with MIDORI and gnash | 04:40 |
| somsip | Guest59557: then stay and help others, or take your conversation to #ubuntu-offtopic | 04:40 |
| Guest59557 | ok! | 04:41 |
| Jonii^^ | So it looks like I have to manually compile my own drivers to make my wireless connection work again? :( | 04:45 |
| Spider | bummer | 04:46 |
| Jonii^^ | Uh, I haven't compiled code before | 04:47 |
| Jonii^^ | Where do I run make command? | 04:47 |
| Jonii^^ | Any rules of thumb or something, I'm not sure how this drivers package(backports its called) is structured | 04:48 |
| Guest59557 | what firmware | 04:49 |
| Guest59557 | what ur card brand | 04:51 |
| Guest59557 | what kind of wifi card? | 04:52 |
| Guest59557 | anyone know how to get battery monitor in pannel of xfce | 04:58 |
| Jonii^^ | Guest59557: atheron qualcomm device | 05:01 |
| Jonii^^ | 168c:0041 | 05:02 |
| Guest59557 | ill look | 05:02 |
| Jonii^^ | I'm having trouble compiling anything. Make fails | 05:02 |
| Jonii^^ | I don't know why :( | 05:02 |
| Jonii^^ | Guest59557: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940 | 05:04 |
| ubottu | Launchpad bug 1436940 in linux (Ubuntu Wily) "Atheros wifi 168c:0041(QCA6164) is not supported" [Medium,Confirmed] | 05:04 |
| Guest59557 | bummer | 05:10 |
| jpmh | I have a 14.4 server that periodically dies - how do I discover what killed i when I get it back up? | 05:11 |
| somsip | jpmh: check /var/log/syslog | 05:11 |
| jpmh | somsip, ty, heading there now | 05:12 |
| jpmh | somsip, nothing in the syslog other than a gap between a cron job which runs every hour and the restart - any other suggestions | 05:16 |
| somsip | jpmh: does the restart happen with any regularity? | 05:22 |
| jpmh | somsip, it does not restar, I need to restart it, and NO, this is the second time it has happened since I installed it a couple of weeks ago | 05:23 |
| somsip | jpmh: so what happens that means 'dies' that is not a stop or reboot? | 05:24 |
| jpmh | it is a stop as far as I can tell. | 05:25 |
| somsip | jpmh: how do you access the server? SSH or direct access? | 05:25 |
| jpmh | somsip, ssh, it is remote | 05:25 |
| somsip | jpmh: so are you telling me the server stops, then you SSH in and reboot it? | 05:26 |
| jpmh | somsip, I have the NOC re-boot it for me | 05:26 |
| somsip | NOC? | 05:26 |
| jpmh | somesip, network operations center | 05:29 |
| somsip | jpmh: I'd suggest getting them to provide more information about what state it's really in | 05:30 |
| Jonii^^ | I'm getting "permission denied" errors when running "make defconfig-ath10k" :3 | 05:31 |
| === zach` is now known as zprog | ||
| jpmh | somesip, all they can tell me is that they too need to re-boot it | 05:31 |
| somsip | jpmh: is this your dedicated server or a hosted VM? | 05:32 |
| jpmh | somsip, a leased dedicated machine | 05:33 |
| somsip | jpmh: and it just crashes, sometimes, with nothing in logs. I'd still want to exclude hardware issues. | 05:34 |
| jpmh | somsip, hardware issues have been removed by the fact that I copied my config to a spare server after the first time. The spare server had been running centos for over a year. This is a sort of test to see if I want to change to ubuntu | 05:35 |
| crazyhorse | is there a way i can share the internet of my computer with another computer? | 05:41 |
| somsip | !ics | crazyhorse | 05:42 |
| ubottu | crazyhorse: If you want to share the internet connection of your Ubuntu machine with other machines in the network see https://help.ubuntu.com/community/Internet/ConnectionSharing | 05:42 |
| somsip | jpmh: then, it's a fairly weak suggestion, but I'd set up iostat or similar to dump to a log so you have something to look at next time it crashes | 05:42 |
| somsip | jpmh: what services is it running? | 05:43 |
| crazyhorse | somsip: that seems to be for wifi connnections | 05:43 |
| jpmh | somsip, what is iostat? As to services it is runing, not much sshd, postfix, dovecot and apache are the only things that I have added or configured that are not standard part of a 14.4 server install | 05:44 |
| somsip | crazyhorse: not exclusively - see "Ubuntu Internet Gateway Method" for example | 05:44 |
| somsip | jpmh: check the logs for those services | 05:45 |
| somsip | !info iostat | jpmh | 05:45 |
| ubottu | jpmh: Package iostat does not exist in wily | 05:45 |
| Jonii^^ | Ah, okay, so, I got permission denied because a file wasn't set to be allowed to be run as executable | 05:45 |
| somsip | !find iostat | 05:45 |
| ubottu | Found: banshee-extension-radiostationfetcher, pcp-import-iostat2pcp | 05:45 |
| jpmh | somsip, I had already checked those logs, nothing there | 05:45 |
| Jonii^^ | Also, I applied patch incorrectly. Forgot one ";" at the end of one statement, got a kilometer long error from make :3 | 05:45 |
| somsip | jpmh: iostat, iotop etc can monitor mem, cpu and other usage and dump data | 05:45 |
| dafb | jpmh: could your isp be blocking those services? | 05:46 |
| jpmh | somsip, ty, I will read up on them | 05:46 |
| crazyhorse | somsip, that one says it requires two ethernet cards :/ | 05:46 |
| jpmh | dafb, no, all works well for about a week and then the server just stops | 05:46 |
| === yan__ is now known as lanoceansky | ||
| C00k33-m0st3r | how to setup | 06:00 |
| cuc | Hello. I have a question... Sometimes (actually, almost 50% of the cases) when my computer starts up, Ubuntu Mate won't load. My screen just freezes... How do I fix this? | 06:01 |
| MyFriend | Greetings! I want to install calm window manager | 06:03 |
| MyFriend | I don't know how to do this yet as it is not in the repositories | 06:03 |
| MyFriend | There is this link but I don't know what to do with the file http://manpages.ubuntu.com/manpages/wily/man1/openbsd-cwm.1.html | 06:03 |
| MyFriend | I am here now https://launchpad.net/ubuntu/+source/cwm/5.6-4 | 06:04 |
| rww | MyFriend: which Ubuntu version? | 06:05 |
| MyFriend | Oh ok I figured it out | 06:06 |
| Dylan____ | Hey guys im creating a partiton that the hard disk only has 250gigs what do i do | 06:06 |
| MyFriend | rww, thnak you for your help, perhaps you can give me a hand with this, how do I a) get rid of that horrible bongo drum sound at the login screen and b) how do I choose which apps run upon booting? to answer your question I think I am on 14.04 I just installed it! | 06:07 |
| rww | No idea on either of those. The party line for 14.04 and cwm "It's not in Ubuntu repos, there may be unofficial methods, we don't support them.". The non-party line is "at your own risk download the relevant packages for vivid and try installing them" | 06:08 |
| MyFriend | rww, I just clicked on "Desktop-preferences" and I got a box which says "Desktop manager is not active" | 06:09 |
| Dylan____ | Guys im having trouble installing grub boot loader | 06:16 |
| Dylan____ | It says the amd64 thing couldnt install to /target/ | 06:16 |
| BlackArts | how do i resize my desktop with gnome? please? | 06:24 |
| === zephyr is now known as Guest23686 | ||
| ilhami | GModule (/usr/lib/x86_64-linux-gnu/gtk-2.0/2.10.0/immodules/im-ibus.so) initialization check failed: GLib version too old (micro mismatch) | 06:26 |
| === Guest23686 is now known as ubuntCake | ||
| ilhami | what should I do? Get a newer version of GLib? | 06:28 |
| DalekSec | w ilhami | 06:29 |
| ilhami | DalekSec, ? | 06:29 |
| DalekSec | ilhami: Sorry, tab button got too fresh with my fingers. | 06:30 |
| ilhami | so what was the answer? | 06:31 |
| ubuntCake | how do I change the FQDN of an ubuntu host? | 06:31 |
| ubuntCake | just edit /etc/hosts? | 06:32 |
| BlackArts | i fixed it.. it ened up being a setting on my tv that fixed it | 06:38 |
| lotuspsychje | !yay | BlackArts | 06:38 |
| ubottu | BlackArts: Glad you made it! :-) | 06:38 |
| OerHeks | ubuntCake, 2 places, /etc/hosts and /etc/hostname | 06:39 |
| OerHeks | !hostname | 06:39 |
| ubottu | Use hostname <somehostname> to set the hostname, or to do it permanently: edit /etc/hosts to include BOTH the old and new hostname and then change /etc/hostname to the new one. WARNING! Make sure that your current hostname and /etc/hosts match, otherwise sudo may not work properly. | 06:39 |
| ubuntCake | I got it, thanks | 06:39 |
| ubuntCake | "/etc/hostname" has the $HOST_NAME, /etc/hosts has $IP $FQDN $HOST_NAME | 06:47 |
| jhg301 | HELLO ,🌹, I just wanted to send you a message.🌹 | 06:51 |
| jhg301 | I wish the good for you as I wish it for myself. | 06:51 |
| jhg301 | (SIMPLY) | 06:51 |
| jhg301 | -(1) Just Take a brief idea about Islam .(you won't lose anything) | 06:51 |
| jhg301 | -(2) Just read a let bit about Islam .(Consider it as a general culture). | 06:51 |
| jhg301 | -(3) Just Give yourself a chance to know the truth that will make you happy .(You are a beneficiary,no one else) | 06:51 |
| MyFriend | Hi there, I installed calm window manager, how can I log out from the terminal if I am not using gnome? | 06:51 |
| MyFriend | using 14.04 here | 06:51 |
| jhg301 | http://www.islamland.com/eng | 06:52 |
| jhg301 | https://www.edialogue.org | 06:52 |
| jhg301 | That's all. ☃ | 06:52 |
| jhg301 | If you need any help. I'm ready.🌹 | 06:52 |
| jhg301 | Save this message. To read it later. Maybe you need it someday.🌹 | 06:52 |
| jhg301 | -↠ May Allah (God) grant you all good.🌹. Amen. | 06:52 |
| derock299 | hello, I have a problem, lately my left hand menu panel becomes unresponsive after 30 minutes, also I won't be able to launch any application, the system freezes except for current open pages or applications. I am using ubuntu 14.04....please I need help | 06:54 |
| shmoon_ | can I specify the user for the mail command ? | 06:55 |
| shmoon_ | I want to read the mail of another user | 06:55 |
| user | ... | 06:56 |
| derock299 | hello, I have a problem, lately my left hand menu panel becomes unresponsive after 30 minutes, also I won't be able to launch any application, the system freezes except for current open pages or applications. I am using ubuntu 14.04....please I need help | 06:57 |
| lotuspsychje | !patience | derock299 | 06:58 |
| ubottu | derock299: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/ | 06:58 |
| === shuduo_afk is now known as shuduo | ||
| === Tronsha is now known as [UPA]Stefan | ||
| BlitzerHound | I had a /hopefully/ quick question if anyone feels up to answering it. | 07:05 |
| BlitzerHound | It's concerning screen reader stuff. | 07:05 |
| BigBaby | hey BlitzerHound, feel free to ask, no need to ask if you can ask, just ask your question | 07:07 |
| BlitzerHound | Well, just wanted to see if anyone was around, honestly. | 07:07 |
| BlitzerHound | Anyway | 07:07 |
| BigBaby | :-) | 07:08 |
| BlitzerHound | I downloaded a program called NVDA, and I ran it under wine. But... I don't think it did anything? And I read the help file, but none of the stuff seems related to ubuntu/linux, all windows commands | 07:08 |
| BlitzerHound | I know it ran, or think it did, because I heard a chiming noise. But nothing came up, and I don't really see it open in the task bar or anything | 07:08 |
| BigBaby | not my specialty, but as for Wine, think of it like a windows container within linux, so sure the commands will be windows commands. you could try to check the wine logs, and see maybe there was some missing dependency on your linux installation. | 07:11 |
| === fusa24 is now known as almsot | ||
| === almsot is now known as fusa24 | ||
| BlitzerHound | Okay. I... don't really know how to do all that, so I'll just ask a secondary question. How do I use Orca? It mostly just reads... everything but text. | 07:13 |
| MyFriend | how can I get rid of the bongo drum sound on the login screen? | 07:13 |
| MyFriend | on 14.04 | 07:13 |
| BigBaby | all the logs will be in /var/logs usually. | 07:14 |
| BigBaby | sometimes they are in folders names as the program you are running. | 07:15 |
| BigBaby | or siles with same name as the program you are running | 07:15 |
| BigBaby | i am mostly a Linux Server user, not so much on desktop, but the core is same on both BlitzerHound | 07:15 |
| BlitzerHound | Well, lets say that even if I DID see those logs, I didn't know what to do with them or they may perhaps be gibberish to me. :D Any idea about the orca thing? I mean, it already comes installed on the system so I figure maybe there's a ay to look at the commands or something? | 07:17 |
| BigBaby | you can paste the logs into pastebin.org and post the url to it here, people may then review them, and maybe help. | 07:21 |
| ubuntCake | Does anyone know what the IP 127.0.1.1 is doing in /etc/resolv.conf, and how it is able to perform DNS queries? | 07:21 |
| ctlaltdel | 64 tabs firefox pesonal record | 07:23 |
| BigBaby | yes, it refers the DNS query to the localhost which in turn has the DNS servers set to the servers set in the router, or from the ISP. | 07:23 |
| BigBaby | 127.0.0.1 is the same of saying SELF | 07:23 |
| Dylan____ | Guys can i install the wifi drivers when i boot up into ubuntu through a usb? | 07:24 |
| BigBaby | if your computer is set to connect using DHCP, then ctlaltdel the DHCP server will give the DNS servers, so any query made to the localhost, will be redirected to the DNS servers. | 07:24 |
| BigBaby | ctlaltdel, Hope this helps | 07:24 |
| ctlaltdel | thanks! | 07:25 |
| ctlaltdel | Han shot first | 07:25 |
| ubuntCake | ok, because "dig @8.8.8.8 google.com" is giving me different results than "dig @127.0.1.1 google.com" | 07:25 |
| BigBaby | google is not an example, try a site you know is only hosted on a single server, and not on cloud deployment | 07:26 |
| BigBaby | ubuntCake, are you having problem? or just trying to understand? | 07:27 |
| ubuntCake | I am trying to set up bind DNS server | 07:27 |
| === KpuCko is now known as Honda | ||
| ubuntCake | I have got it to forward requests, but I want an authoratative DNS server. | 07:29 |
| === Honda is now known as KpuCko | ||
| lotuspsychje | how about you guys ask in ##networking | 07:30 |
| BigBaby | in the bind conf can you see which address the server is bound to? | 07:30 |
| BigBaby | lotuspsychje, this is Ubuntu networking, why send him away? he is asking about ubuntu, no? | 07:31 |
| lotuspsychje | BigBaby: i dont send him away, im trying to make it easier for you to understand | 07:32 |
| BigBaby | no problem lotuspsychje thank you. | 07:34 |
| lisbeth | Happy holidays from ubuntu server | 07:51 |
| MyFriend | how can I access an external hd from the terminal? | 07:51 |
| MyFriend | it is plugged but i need to access it from the terminal as i am on a window manager | 07:52 |
| lisbeth | MyFriend type "lsblk" | 07:52 |
| lisbeth | then coy and paste the output into www.hastebin.com | 07:52 |
| MyFriend | http://paste.ubuntu.com/14278954/ | 07:53 |
| === nusaiba is now known as nrsk | ||
| === Flutterb1t is now known as Flutterbat | ||
| holyguyver | I am having an odd problem with my sound cards. My sound cards are 0 snd_hda_intel 1 snd_hda_intel 2 snd_usb_audio one of those intels is hdmi which I wish to disable, the other is realtek which I want to be the default. How do I go about this? | 08:01 |
| lotuspsychje | !sound | holyguyver | 08:03 |
| ubottu | holyguyver: If you're having problems with sound, click the Volume applet, then Sound Preferences, and check your Volume, Hardware, Input, and Output settings. If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/DmixPlugin - For playing audio files, see !players and !mp3. | 08:03 |
| holyguyver | lotuspsychje: I already tried to volume aplet, & sadly that did not work. I have also spent the past two hours in forums reading about black listing & alsa base, none of it has been working for me :'( | 08:05 |
| t3 | Anyone knows whether there are any specialists for Lucid still hanging around anywhere ? | 08:09 |
| bazhang | !lucid | 08:11 |
| ubottu | Ubuntu 10.04 LTS (Lucid Lynx) was the twelfth release of Ubuntu. Desktop support ended May 9 2013. Server support ended on April 30 2015. See http://ubottu.com/y/lucid for more details. | 08:11 |
| bazhang | its eol t3 | 08:11 |
| bazhang | upgrade to a supported version t3 | 08:11 |
| t3 | I know :-( | 08:11 |
| bazhang | t3 that means no support in here either | 08:12 |
| t3 | But I'll have to use it for another 4 months | 08:12 |
| arc_love | one | 08:12 |
| arc_love | gogoggo | 08:12 |
| t3 | Thought here would be at least 1/1740 who can help - not officially support | 08:13 |
| bazhang | t3 not on this channel no | 08:14 |
| bazhang | t3 please stop asking for an eol support issue | 08:14 |
| t3 | Is there another channel I could try ? | 08:14 |
| arc_love | what is this going to do?? | 08:14 |
| rww | i don't know of a channel for supporting unsupported ubuntu versions, no :[ | 08:16 |
| fai | hello, is there a quick way to let me preview pics in PCmanFM? i always have to right click them 1 by one... | 08:17 |
| somsip | fai: ISTR there is an option to generate thumbnails, but it's set to minimum size. Lower the size to get more thumbnails, but slower performance | 08:18 |
| t3 | As I said: I'm not looking for official support. There are people talking about programming a sinclair z80 nowadays - why not hoping that there's a talk about Lucid still going on somewhere ? | 08:18 |
| fai | somsip you thai? lol | 08:18 |
| somsip | fai: no - just live here | 08:18 |
| fai | and ty ill try | 08:18 |
| fai | me too | 08:18 |
| fai | in chiang mai currently | 08:19 |
| thuongnd | :v | 08:19 |
| derener | Question.... why are libc6-i386 and libc6:i386 both existing? is it for compatibility with binaries built earlier? | 08:20 |
| somsip | derener: multiarch support - some packages need 32bit libs | 08:20 |
| derener | is libc6-i386 for binaries built before libc6:386? | 08:21 |
| somsip | derener: if you have a 64 bit system, like that libc6-i386 is actually libc6-i386:x64 (though in some way that makes little sense) | 08:21 |
| derener | if i run an old binary it's going to ask for lib6-i386 | 08:22 |
| rww | (amd64) | 08:22 |
| derener | is this the only reason it is kept? | 08:22 |
| somsip | derener: it will ask for either the 64 bit or the 32 bit version | 08:22 |
| somsip | rww: as yes - ta | 08:22 |
| derener | libc6-i386 used to be part of the system. then it was kept for older binaries that would ask for it | 08:24 |
| somsip | derener: it is "GNU C Library: 32-bit shared libraries for AMD64" | 08:25 |
| sheikha | /msg NickServ VERIFY REGISTER sheikha gxeumurdjknh | 08:25 |
| fai | dropped for a while dont know if i got any response | 08:26 |
| somsip | fai: nothing since my suggestion about thumbnails | 08:26 |
| fai | hmm, care to explain ISTR? sorry quite new to linux | 08:29 |
| nrsk | /msg NickServ VERIFY REGISTER nrsk pjtaapdbficy | 08:29 |
| somsip | fai: I Seem To Remember... | 08:29 |
| rww | nrsk: no space in front of it | 08:29 |
| fai | o lol, ty then ill see if i can find more info online | 08:30 |
| somsip | fai: On the menu - Edit, Preferences, Display | 08:30 |
| fai | ah cristalclear now thx somsip, its hell for me to look things up over the internet over here. so ty very much for your time! | 08:32 |
| somsip | fai: np | 08:32 |
| xaos | hi | 08:33 |
| derener | ubuntu seems to craving users but the users find it hard to use | 08:34 |
| somsip | derener: better off in #ubuntu-offtopic with that train of thought... | 08:34 |
| derener | the installer is mouse driven but after you install it you are driven to the console by ubuntu-forums | 08:34 |
| derener | ok | 08:34 |
| derener | why is the ubuntu roadmap offtopic? | 08:35 |
| rww | because it's not ubuntu support | 08:35 |
| derener | i didn't know that this channel is only for support | 08:36 |
| somsip | !topic | derener | 08:36 |
| ubottu | derener: Please read the channel topic whenever you enter, as it contains important information. To view it at any time after joining, simply type /topic | 08:36 |
| sitou | hi guy | 08:54 |
| locksmith | Hey Ubuntu developers, this bug is very annoying: https://bugs.launchpad.net/ubuntu/+source/vte/+bug/1350334 | 09:00 |
| ubottu | Launchpad bug 1506166 in vte3 (Ubuntu Trusty) "duplicate for #1350334 Bracketed paste should be per-terminal [PATCH]" [Medium,Fix released] | 09:00 |
| somsip | locksmith: this isn't the developers channel - just support | 09:00 |
| locksmith | How can I get a new update? | 09:00 |
| Dylan____ | Anyone here installed zorion os before? | 09:00 |
| locksmith | how do I patch myself | 09:00 |
| somsip | locksmith: looks like it's "Fix released" | 09:00 |
| Dylan____ | Cause i cant even install it through a dvd nor usb | 09:00 |
| Dylan____ | It just lags and freezes | 09:00 |
| somsip | Dylan____: it's not supported here - they will have their own support channel | 09:01 |
| Dylan____ | Ah ok | 09:01 |
| Dylan____ | Thx anyways | 09:01 |
| locksmith | so I gotta rebuild it | 09:02 |
| locksmith | and apply the patch | 09:02 |
| locksmith | basically | 09:02 |
| somsip | locksmith: looks like it's been backported - what version do you have now? | 09:03 |
| locksmith | 3.19.0-42-generic #48~14.04.1-Ubuntu SMP Fri Dec 18 10:24:49 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux | 09:03 |
| somsip | !info vte trusty | 09:03 |
| ubottu | Package vte does not exist in trusty | 09:03 |
| somsip | locksmith: so is this a problem with vte, or gnome-terminal or what? | 09:04 |
| locksmith | nm | 09:04 |
| derener | Dylan____: better try an os that has more users | 09:06 |
| Dylan____ | Ahh well i got a macbook thats inoperable:/ used to have windows xp on it now i wanted to install zorin but i grt weird graphics errors etc | 09:07 |
| somsip | !mac | Dylan____ (FWIW) | 09:08 |
| ubottu | Dylan____ (FWIW): For help on installing and using Ubuntu on a Mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages | 09:08 |
| NoCode | Hi is there anyway to completely remove an application and its folders/ dependencies so it doesn't conflict with a newer version of said program? I want to install from another source. | 09:15 |
| Jonii^^ | Like, script or something. I have Lenovo Yoga, but the wrap-around doesn't work. I was thinking if creating some sort of trigger for when laptop wraps around to do stuff, like disable touchpad... | 09:16 |
| === Hobbyboy|BNC is now known as Hobbyboy | ||
| Lurchy | forgive the noob question...but is it easy to take a snapshot of a drive with an Ubu image........and then move it to say...a SSD drive and be able to boot offa the new ssd drive? | 09:49 |
| Lurchy | ive done this in windows...but still learning about disk management in linux | 09:50 |
| BlackArts | good question Lurchy , im not sure ive heard of one | 09:54 |
| k1l_ | Lurchy: use tools for that like dd | 09:54 |
| imofftopic | hi | 09:58 |
| imofftopic | I've lost my wifi and sound | 09:59 |
| imofftopic | I type sudo ifconfig | 09:59 |
| imofftopic | only shows ethernet and loopback | 09:59 |
| imofftopic | no wlan | 09:59 |
| nrsk | hi I'm solving formating Numbering/ordered list bug in libreoffice https://bugs.documentfoundation.org/show_bug.cgi?id=42788 | 10:05 |
| ubottu | bugs.documentfoundation.org bug 42788 in Writer "FORMATTING - Numbering/ordered list results in misaligned text after a certain level: default indent does not match with the width of numbers/bullets" [Normal,New] | 10:05 |
| nrsk | and I changed the numbering alignment to the right and I increase the indentation but it affect all the Numbering/ordered list not only the Roman numbers. could you help me? where should I look to correct the style and make it default for Roman numbers only | 10:06 |
| cooldharma06 | hi all | 10:10 |
| cooldharma06 | i am trying to forward my packets to another machine | 10:11 |
| cooldharma06 | i used iptables and followed this link. -> https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/4/html/Security_Guide/s1-firewall-ipt-fwd.html | 10:11 |
| BlackFate | cooldharma06, like a redirection for a specific port or ip? | 10:14 |
| cooldharma06 | BlackFate i want both ip and port | 10:14 |
| BlackFate | cooldharma06, i think you need something like that https://www.google.gr/search?q=laravel&oq=laravel&aqs=chrome..69i57.942j0j7&sourceid=chrome&es_sm=122&ie=UTF-8 | 10:16 |
| cooldharma06 | i want to forward my smtp packet from one network to another one | 10:16 |
| BlackFate | cooldharma06, you can always use a proxy app to do that | 10:16 |
| cooldharma06 | with iptbales i cant able to achieve this one?? | 10:17 |
| oaulakh | why my sound not working in ubuntu, it was working fine but after reboot i don't have sound anymore, any suggestion, and yes i didn't even install anything yet | 10:17 |
| oaulakh | why my sound not working in ubuntu, it was working fine but after reboot i don't have sound anymore, any suggestion, and yes i didn't even install anything yet. in windows it's working perfect but i dunno what problem i am facing in ubuntu now | 10:17 |
| BlackFate | cooldharma06, sorry for that link --> check this http://www.debuntu.org/how-to-redirecting-network-traffic-to-a-new-ip-using-iptables/ | 10:17 |
| BlackFate | cooldharma06, with PREROUTING | 10:18 |
| BlackFate | oaulakh, open your sound settings | 10:18 |
| cooldharma06 | BlackFate thanks i ll check this one | 10:19 |
| oaulakh | BlackFate, i checked in settings also in alsamixer but my device not showing in sound settings somehow i dunno why, but i boot in windows it's working just fine | 10:19 |
| BlackFate | oaulakh, why play with alsamixer? Ubuntu uses pulseaudio over alsa, so you should focus on pulse for starters | 10:20 |
| LaserAllan | Hey there, anyone in here who has any recomendations as far as If i want to dual boot with Windows on a laptop that comes with a recovery partition?, i have been told that if i install Linux on it, GRUB will replace the bootloader that lets me recover windows and thus eliminating any warranty and way of reinstalling a valid Windows license | 10:21 |
| oaulakh | BlackFate, but still sound not working i can't see my input device in setting | 10:21 |
| milo_ | hi all | 10:21 |
| milo_ | I need to implement a small server that can track certain words between the post office, is it possible? | 10:21 |
| urine_boy | hi everyone, i like racism | 10:21 |
| urine_boy | i hate black people (niggers) because they are black | 10:21 |
| oaulakh | LaserAllan, it's true if you don't make a backup of that systrem drive with ghost | 10:22 |
| BlackFate | oaulakh, please paste the output of aplay -l and pacmd list-sinks | 10:22 |
| LaserAllan | oaulakh: And if i were to do this, how am i supposed to get windows to dual boot with linux on that laptop then?, just trying to figure out this so i won't void the warranty on it :) | 10:23 |
| milo_ | sorry about my english, some write spanish? | 10:24 |
| BlackFate | LaserAllan, I created an image of the system before I install ubuntu. When I need to send it to service I just restore everything | 10:25 |
| oaulakh | BlackFate, http://paste.ubuntu.com/14279810/ | 10:25 |
| milo_ | please, i really need some help... | 10:25 |
| BlackFate | oaulakh, lets focus on that "No PulseAudio daemon running, or not running as session daemon." | 10:25 |
| BlackFate | oaulakh, as a user run, pulseaudio -D and test your sound again | 10:26 |
| oaulakh | LaserAllan, simple first make a backup of system recovery drives to image in norton ghost and than use wubi to install ubuntu with windows, so simple bro. and when ever you face some issue restore everything go to your vendor for fix | 10:26 |
| BlackFate | wubi is kinda deprecated | 10:27 |
| oaulakh | BlackFate, still not working | 10:27 |
| BlackFate | oaulakh, is pulseaudio running? | 10:28 |
| LaserAllan | oaulakh: Does sound simple, I just dont wanna void the warranty on a 1000 Dollar laptop | 10:28 |
| oaulakh | BlackFate, yes now it's running | 10:28 |
| LaserAllan | I have been against laptops for so long buit now i am ion need of one | 10:28 |
| LaserAllan | I just iwsh Linux had had vulkan and that game devs ahd used vulkan allready | 10:28 |
| BlackFate | oaulakh, does pacmd list-sinks return any sinks now? | 10:28 |
| LaserAllan | becuase then i could just throw MS out the door | 10:28 |
| oaulakh | BlackFate, no | 10:28 |
| oaulakh | BlackFate, sorry it say sdeamon startup failed | 10:29 |
| cooldharma06 | BlackFate i did but it still not redirecting | 10:29 |
| BlackFate | oaulakh, can you paste the exact error? thanks | 10:30 |
| oaulakh | LaserAllan, oh my sweet baby please ask someone who have experience with norton ghost and all that, it's simple until you make it chaostic :) | 10:30 |
| BlackFate | cooldharma06, did you flush your rules and everything before you start making any changes? | 10:30 |
| LaserAllan | oaulakh: I suppose google is my friend int that case:D | 10:30 |
| cooldharma06 | http://pastebin.com/ESrcyjMR | 10:30 |
| oaulakh | LaserAllan, yes and brain is your worker to do things right way, start now :) | 10:31 |
| cooldharma06 | http://pastebin.com/7dJhcnyi BlackFate | 10:31 |
| LaserAllan | oaulakh: Will do, hopefully i won't end up witha broken laptop after this, i just wish theyde just godamn give me the disc or usb stick you know and i could jus treinstall it whjen i feel like it | 10:31 |
| LaserAllan | Feels allot simpler that way | 10:31 |
| oaulakh | BlackFate, http://paste.ubuntu.com/14279855/ | 10:32 |
| LaserAllan | Becuase I plan to mainly run linux on it and then have Windows for gaming, until Linux actually takes the head from MS which i really hope will happen at some point thanks to vulkan | 10:32 |
| oaulakh | hahahhahaha | 10:32 |
| oaulakh | LaserAllan, soon or later it will | 10:32 |
| BlackFate | cooldharma06, only as user. not root. can you run pulseaudio -v -D ? (with verbose) | 10:32 |
| LaserAllan | oaulakh: I haven't used linux for more than maybe 8 motnhs but i lvoe it for servers | 10:33 |
| LaserAllan | so amazing | 10:33 |
| LaserAllan | Security and the fact that you don't have to be surveryed and monitored and fail2ban was a really neat tool that once i finally got it working lioke i wanted is really damn nice to have | 10:34 |
| cooldharma06 | BlackFate demon startup failed if i run with sudo startup successful | 10:34 |
| BlackFate | cooldharma06, this deamon needs to run as user.. please kill the root daemon | 10:35 |
| oaulakh | LaserAllan, download some ghost.exe and it will make your bootable pandrive, i think it will be of 2.5mb maybe than backup drive or ask me i done it alot of time, but first write down which drive have what type of data and how big it is , go to mycomputer and than select manage when right click on it than select disks and management and write down details before you sharp your sword :) | 10:35 |
| BlackFate | cooldharma06, I just need to see what verbosive errors you get when you run pulseaudio -v -D (please kill the root instance before you ran this) | 10:35 |
| LaserAllan | oaulakh: Indeed I will write down your name here from irc so I will remember, I haven't actually recieved the laptop yet but thanks allot for beeing so helpful :) | 10:36 |
| LaserAllan | More power to linux hopefully | 10:36 |
| cooldharma06 | http://pastebin.com/NfMUk1Bc | 10:36 |
| oaulakh | LaserAllan, yup i have dual booth too but i love linux for educational and programming purpose and all that :) | 10:37 |
| BlackFate | cooldharma06, what ubuntu do you use? | 10:37 |
| BlackFate | cooldharma06, run "rm -rf ~/.config/pulse/" | 10:38 |
| === BlackArts is now known as Happyippy | ||
| === Happyippy is now known as HappyHippy | ||
| cooldharma06 | sorry debian one min i ll check in my ubuntu machine | 10:38 |
| oaulakh | LaserAllan, windows is good for playing games as u said before ;) | 10:38 |
| oaulakh | BlackFate, can i get my sound back bro? | 10:38 |
| stas | привет | 10:39 |
| === stas is now known as Guest67081 | ||
| BlackFate | oaulakh, sorry i mixed the usernames. run pulseaudio -v -D | 10:39 |
| oaulakh | ok | 10:39 |
| LaserAllan | oaulakh: Yeah but I really want Linux to take that helmet becuase Windows at least had a tendency to get very worn down and slow after some time, I have had issues with my linux servers, but trhat has mostly been very specific applications that has had updates made to them which has ended up breaking (PLEX for example) but other than things has worked quite well. | 10:39 |
| Guest67081 | o | 10:39 |
| Guest67081 | \ | 10:39 |
| Guest67081 | ok | 10:39 |
| cooldharma06 | BlackFate great i ll wait for some min after that i ll ping you.. :) | 10:40 |
| oaulakh | LaserAllan, sometime it show some weired behavious like kernel is much complex and we are just bignners to understand but some people whoo do can do magic anywhere :) | 10:41 |
| oaulakh | BlackFate, still fail | 10:41 |
| oaulakh | BlackFate, http://paste.ubuntu.com/14279914/ | 10:42 |
| BlackFate | oaulakh, "rm -rf ~/.config/pulse/" and then try the following. "killall pulseaudio && sleep 3 && pulseaudio -v -D" | 10:42 |
| BlackFate | oaulakh, i think we found the error :) | 10:43 |
| BlackFate | oaulakh, also avoid using sudo with pulseaudio | 10:43 |
| oaulakh | ohh my bad | 10:43 |
| BlackFate | oaulakh, if you have trouble deleting the folder, try as root to delete it | 10:44 |
| oaulakh | BlackFate, yup i did all but still fails http://paste.ubuntu.com/14279934/ | 10:45 |
| BlackFate | oaulakh, ls -al /home/boo/.config/pulse//daemon.conf | 10:46 |
| oaulakh | BlackFate, demon startup successfull with sudo but still no sound | 10:46 |
| BlackFate | oaulakh, well.. don't run it as sudo... it wont work | 10:47 |
| oaulakh | BlackFate, no such file or directory | 10:47 |
| BlackFate | oaulakh, and you are probably messing with the file permissions too | 10:47 |
| oaulakh | BlackFate, got error from ls no such file or directory | 10:47 |
| oaulakh | ohhh yeah i got it | 10:48 |
| oaulakh | BlackFate, yes i did | 10:48 |
| oaulakh | ohh man so that's why all this happening | 10:48 |
| oaulakh | BlackFate, i did mistake like chmod 777 userHomeDirectory :(, now how i can fix it back | 10:49 |
| BlackFate | oaulakh, try "killall pulseaudio" make sure that no pulseaudio runs with ps -ef | grep pulseaudio. then "sudo rm -rf /home/boo/.config/pulse/" then as user pulseaudio -v -D | 10:50 |
| oaulakh | how to get back all permissions or i think i should make new user in ubuntu again right to make thing work properly right | 10:50 |
| BlackFate | oaulakh, did you do chmod -R or just chmod? | 10:51 |
| oaulakh | chmod -R | 10:51 |
| oaulakh | means all subdirectories :( | 10:51 |
| BlackFate | oaulakh, its ok, try the last one I sent you | 10:51 |
| lubuntu | hi | 10:53 |
| oaulakh | BlackFate, http://paste.ubuntu.com/14279969/ fail again | 10:53 |
| === lubuntu is now known as Guest49449 | ||
| Guest49449 | Is tehre | 10:54 |
| BlackFate | oaulakh, pulseaudio -vvvv -D | 10:55 |
| Guest49449 | Is there a program to do keeymappings w/ a graphical user interface | 10:55 |
| oaulakh | BlackFate, failed still | 10:55 |
| wil__ | I upgrade to ubuntu 15.10 last night and now Xorg is using ~100% cpu. I have a Radeon HD 8570 graphics card and am using the recommend drivers. Any idea what's causing it? | 10:55 |
| Guest49449 | my laptop has keys that ubunut doesn recognize now | 10:55 |
| BlackFate | oaulakh, do you get a better error though:? | 10:55 |
| oaulakh | BlackFate, no i get same error as previous it's permission related i think i should do something for new user maybe i should check if it's work in guest? | 10:56 |
| wil__ | @<Guest49449> AntiMirco. It's mainly for game pads but it might work on a keyboard. | 10:56 |
| oaulakh | BlackFate, i will msg you if it's work ok let me loguot this user | 10:57 |
| BlackFate | oaulakh, yes do that, but check something for me. ps -ef | grep pulse. is that running? | 10:57 |
| oaulakh | ok | 10:57 |
| Guest49449 | I'll check it wout thatnks wil__ | 10:57 |
| BlackFate | Guest49449, you can check if these keys are recognized in the first place by running xev in a terminal, after you do that, press the keys and see if you get a feedback from xev | 10:57 |
| MyFriend | Hello, how can I turn the animations off on ubuntu 14.04 | 10:59 |
| MyFriend | the slow fading of windows etc | 10:59 |
| MyFriend | to completely do away with them so that when i reboot they dont re-emerge | 10:59 |
| BlackFate | MyFriend, install compiz config settings manager and disable them | 11:00 |
| === Lantizia is now known as Guest36500 | ||
| MyFriend | ok | 11:01 |
| Spacedog_ie | yo | 11:01 |
| MyFriend | i installed it BlackFate how do i specifically disable them? | 11:01 |
| Spacedog_ie | hi guys, what files do I need to backup/restore for contacts info? | 11:02 |
| Guest49449 | Hey, BlackFate, I treid xev and the keys i'm having a proglem with aren't giving a response.... are they phiysically broken | 11:02 |
| oaulakh | BlackFate, still no sound http://paste.ubuntu.com/14279969/ | 11:02 |
| BlackFate | Guest49449, nope, linux is probably failing to recognize them | 11:03 |
| TTTTNNNNNNTT | hello guys | 11:03 |
| oaulakh | wait wrong output | 11:03 |
| Guest49449 | g | 11:03 |
| TTTTNNNNNNTT | what | 11:03 |
| TTTTNNNNNNTT | friends | 11:04 |
| TTTTNNNNNNTT | hi | 11:04 |
| Spacedog_ie | hi TNT | 11:04 |
| Guest49449 | BlackFate, does that mean I can't really do anything as a new user? | 11:04 |
| TTTTNNNNNNTT | hey spacedog friends | 11:04 |
| Spacedog_ie | soul mates for life!, what's up bro? | 11:05 |
| TTTTNNNNNNTT | nothing | 11:05 |
| MyFriend | BlackFate, i made a huge mistake | 11:05 |
| MyFriend | i dont know what happened | 11:05 |
| Spacedog_ie | ah, same here, just ketting help with my phone | 11:05 |
| MyFriend | but i messed up | 11:05 |
| TTTTNNNNNNTT | spacedog hey | 11:05 |
| BlackFate | oaulakh, the deamon keeps starting in root mode. try the last steps from the paste but use pulseaudio -vvvv -D instead | 11:06 |
| cfhowlett | TTTTNNNNNNTT, spacedog, this is ubuntu support, not social chitchat. stay on topic or go to #ubuntu-offtopic. thank you. | 11:06 |
| BlackFate | MyFriend, please elaborate | 11:06 |
| MyFriend | BlackFate, it logged me out and now there's no panel on gnome | 11:06 |
| TTTTNNNNNNTT | cmon | 11:06 |
| Spacedog_ie | MX4 is a piece of crap, so I got a BQ, trying to mave contacts | 11:06 |
| TTTTNNNNNNTT | who plays minecraft pe | 11:06 |
| k1l_ | Spacedog_ie: #ubuntu-touch is the phone releated channel | 11:06 |
| BlackFate | MyFriend, run unity-reset | 11:06 |
| k1l_ | !ot | TTTTNNNNNNTT | 11:06 |
| ubottu | TTTTNNNNNNTT: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! | 11:06 |
| MyFriend | BlackFate, I am on cwm window manager right now but unity/gnome got all messed up, how do i restore it from the terminal? i dont know what i did i unchecked composites | 11:06 |
| oaulakh | BlackFate, it's old post sorry, but i did 4vvvv as u said but not working | 11:07 |
| BlackFate | oaulakh, no additional errors? | 11:07 |
| wil__ | I kinda fixed the issue with Xorg using all my cpu. I went into mate tweak and disabled all window effects and enabled "use less resources" now the cpu ussage is at ~4% and jumps up 50% every few min | 11:07 |
| MyFriend | BlackFate, what do i type on the terminal? I am cwm i dont know if it will work logged from cwm but i cannot run anything from gnome/unity as there's no panel | 11:07 |
| oaulakh | same permissions error | 11:07 |
| cooldharma06 | BlackFate any suggestions (iptables)?? | 11:07 |
| MyFriend | BlackFate, it says unity-reset command not found | 11:08 |
| BlackFate | cooldharma06, there are tons of guides. check this one for example http://www.cyberciti.biz/faq/linux-port-redirection-with-iptables/. please flush your rules before that | 11:08 |
| BlackFate | MyFriend, run "unity" | 11:08 |
| cooldharma06 | thanks BlackFate:) | 11:09 |
| cfhowlett | wil__, sounds like you might have low system or gpu ram. killing effects helps. you might also find using a less demanding desktop environment helpful. test for yourself: sudo apt install lxde xfce4 logut/choose an alternate DE/login | 11:09 |
| MyFriend | BlackFate, http://pastebin.ubuntu.com/14280072/ | 11:09 |
| MyFriend | I told you I am logged in on calm window manager because if i log into unity there's no panel | 11:10 |
| wil__ | @cfhowlett I have 2 GB gpu ram and 8 System ram and everything was running fine until I upgraded to 15.10 | 11:11 |
| cfhowlett | wil__, will unity and mate are known to be hungry beasts ... | 11:12 |
| === dsitko is now known as lordsith | ||
| BlackFate | MyFriend, setsid unity and try to login with unity again | 11:13 |
| lordsith | plop | 11:14 |
| === cuc is now known as Guest98072 | ||
| MyFriend | BlackFate, ok panel is back | 11:16 |
| MyFriend | now how do i get rid of the animations without messing it up? | 11:16 |
| BlackFate | MyFriend, repeat the steps :). Disable animations | 11:16 |
| MyFriend | BlackFate, I am on dconf | 11:17 |
| MyFriend | where can I find that? | 11:17 |
| BlackFate | MyFriend, run "ccsm" | 11:18 |
| MyFriend | ok I am there BlackFate now what? | 11:18 |
| BlackFate | MyFriend, did the compiz config manager start? | 11:19 |
| MyFriend | on effects uncheck animations and fading windows? | 11:19 |
| BlackFate | MyFriend, just fading | 11:19 |
| MyFriend | oops | 11:19 |
| wil__ | lightdm=gtk-greeter seems to have 5 process running right now all using < 10MB of ram and if I have to try to login and ctrl+alt+backspace to restart is ~3 times to login anychance thats whats causing X to go cpu hungry? | 11:20 |
| MyFriend | BlackFate, I accidentally unchecked both | 11:20 |
| MyFriend | it got messy again and it kicked me out | 11:21 |
| MyFriend | i logged in again | 11:21 |
| MyFriend | BlackFate, animations is checked and fading windows is unchecked now what do i do | 11:21 |
| BlackFate | MyFriend, nothing | 11:21 |
| BlackFate | MyFriend, fading is disabled now | 11:21 |
| MyFriend | it doesnt seem to be | 11:22 |
| MyFriend | when i minimize it fades into the panel | 11:22 |
| BlackFate | MyFriend, this effect is not "fading" | 11:22 |
| MyFriend | how can i just do away so that it is like old gnome | 11:22 |
| MyFriend | no effects at all | 11:22 |
| MyFriend | like lxde | 11:22 |
| oaulakh | BlackFate, solved man, i just make new account in ubuntu i think files are wrong configured bcz of my chmod mistake but now working all is good in new user account | 11:23 |
| oaulakh | BlackFate, thanks for all help :) | 11:23 |
| BlackFate | oaulakh, that's good news :) | 11:23 |
| BlackFate | oaulakh, np | 11:23 |
| BlackFate | MyFriend, click on the animations button and edit the animations there | 11:23 |
| MyFriend | BlackFate, how can i move the panel so it's on bottom? | 11:25 |
| BlackFate | MyFriend, you cant | 11:26 |
| BlackFate | cooldharma06, did you get the iptables working? | 11:27 |
| === ^cj^ is now known as ^CJ^ | ||
| cooldharma06 | BlackFate noap?? my thing i want to forward all packets from 48 machine to 39 machine and viceversa | 11:28 |
| cooldharma06 | i am able to ping both the machines | 11:28 |
| MyFriend | BlackFate, what about the lefthandside launcher? | 11:30 |
| BlackFate | MyFriend, nope | 11:30 |
| MyFriend | why? | 11:31 |
| MyFriend | that's weird isnt it all supposed to be customizable?? | 11:31 |
| === Piper-Off is now known as Monthrect | ||
| cooldharma06 | BlackFate is it possible.?? | 11:32 |
| BlackFate | MyFriend, not really :-/ | 11:33 |
| MyFriend | that's horrible | 11:33 |
| MyFriend | so what do i do? install lxde or enlightenment? | 11:33 |
| BlackFate | MyFriend, maybe ubuntu is not for you. | 11:34 |
| moonpunter | gross. | 11:34 |
| moonpunter | XFCE > * | 11:34 |
| LaserAllan | I know this has nothing to do with Linux or stuff but 28th of December was te sadest day ever | 11:34 |
| cfhowlett | !ot | LaserAllan, | 11:35 |
| ubottu | LaserAllan,: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! | 11:35 |
| MyFriend | moonpunter, i thought enlightenment used fewer resources | 11:35 |
| cfhowlett | MyFriend, lightest are lxde, xfce4 | 11:36 |
| MyFriend | which one is lighter between those two? | 11:37 |
| cfhowlett | MyFriend, lxde but it's close | 11:37 |
| MyFriend | how do i install it? | 11:37 |
| MyFriend | sudo apt-get install lxde ? | 11:38 |
| cfhowlett | MyFriend, sudo apt install lxde then logout, choose your DE, login | 11:38 |
| rodrigo | hi | 11:39 |
| rodrigo | ola | 11:39 |
| === rodrigo is now known as Guest30366 | ||
| cfhowlett | !es | Guest30366 | 11:39 |
| ubottu | Guest30366: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro. | 11:39 |
| MyFriend | cfhowlett, and how do i speed up boot up time to approach the lightness of lubuntu? i have already deleted the libreoffice, firefox, thunderbird, etc | 11:39 |
| cfhowlett | MyFriend, why not just install lubuntu?? | 11:40 |
| cfhowlett | by the way, NONE of those apps launch on boot unless you tell them to | 11:40 |
| MyFriend | cfhowlett, I have had issues with sound in lubuntu | 11:41 |
| MyFriend | cfhowlett, then how can I speed up boot up time? | 11:41 |
| cfhowlett | MyFriend, you actually have all those apps launching at boot?! turn them off! | 11:42 |
| MyFriend | how? | 11:42 |
| MyFriend | cfhowlett, ? | 11:42 |
| cfhowlett | MyFriend, I'm on xubuntu and I have a "session launch" control. not sure what ubuntu/unity has but I'm sure it's there | 11:43 |
| MyFriend | cfhowlett, that didnt work | 11:47 |
| MyFriend | i am installing lubuntu desktop now | 11:47 |
| MyFriend | I apparently got something called cairo dock which uses opengl | 11:48 |
| cfhowlett | MyFriend, how long is your boot time? | 11:52 |
| MyFriend | i think what i should ahve done was install lubuntu-desktop instead of lxde | 11:52 |
| MyFriend | about 1 min | 11:52 |
| cfhowlett | MyFriend, ssd or hdd | 11:52 |
| MyFriend | ? | 11:52 |
| MyFriend | i dont understand your question | 11:52 |
| cfhowlett | solid state driver or hard drive | 11:52 |
| MyFriend | hard drive | 11:54 |
| cfhowlett | MyFriend, 1 minute boot is about right. what did you expect? | 11:54 |
| MyFriend | 30s secs | 11:54 |
| cfhowlett | have you EVER had a 30 second boot? | 11:55 |
| MyFriend | with tinycorelinux | 11:55 |
| cfhowlett | MyFriend, a minimal and severely stripped down *nix. but if that works for you, try ubuntu server | 11:56 |
| MyFriend | cfhowlett, now i am uninstalling lxde, cairo dock and lubuntu deskto | 11:59 |
| MyFriend | desktop | 11:59 |
| MyFriend | cfhowlett, I just did this http://askubuntu.com/questions/453841/how-to-remove-lubuntu-desktop-from-ubuntu-14-04-lts and it didnt work i can still log into lubuntu | 12:03 |
| TJ- | MyFriend: how many times a day do you reboot the PC? | 12:04 |
| MyFriend | brb | 12:04 |
| MyFriend | TJ-, I rebooted but it is still there | 12:07 |
| MyFriend | lubuntu desktop is still an option to log in | 12:07 |
| MyFriend | but when i try to reomve it from terminal i get Package 'lubuntu-desktop' is not installed, so not removed | 12:08 |
| MyFriend | same with lxde | 12:08 |
| MyFriend | i cannot seem to remove it | 12:09 |
| ioria | MyFriend, dpkg -l lxsession* | 12:09 |
| TJ- | MyFriend: because those are meta-packages; they contain nothing themselves except to declare dependencies on the packages that *do* provide the functionality for the desktop, etc. | 12:10 |
| cfhowlett | MyFriend, in other words, proceed with caution | 12:10 |
| MyFriend | ioria, http://pastebin.ubuntu.com/14280445/ | 12:10 |
| rhagu | Hi, is it possible to tell busybox to boot from an attached usb drive? I started via CD and would like to boot ubuntu from the attached drive | 12:10 |
| ioria | MyFriend, remove them | 12:10 |
| MyFriend | how? ioria | 12:11 |
| ioria | MyFriend, sudo apt-get purge lxsession* | 12:11 |
| cfhowlett | !busybox | 12:11 |
| TJ- | MyFriend: "lubuntu-desktop" depends on "lubuntu-core" which, if you remove it, should leave a bunch of packages that can be removed using "apt-get autoremove" | 12:12 |
| cfoch | what is the channel for arcanist? | 12:12 |
| ioria | MyFriend, that's right ^^ | 12:12 |
| k1l_ | !alis | cfoch | 12:12 |
| ubottu | cfoch: alis is a services bot that can help you find channels. Read "/msg alis help list" . For more help or questions relating to alis, please join #freenode. Example usage: /msg alis list #ubuntu or /msg alis list http | 12:12 |
| MyFriend | ioria, done now if i log out both lxde and lubuntu should not appear as options? | 12:12 |
| ioria | MyFriend, try also sudo apt-get autoremove | 12:13 |
| quofi | hello | 12:13 |
| MyFriend | ioria, done, anything else? | 12:13 |
| ioria | MyFriend, let's see... logout out/in | 12:14 |
| quofi | I'm new here, supguys? | 12:14 |
| cfhowlett | quofi, this is ubuntu support. ask ubuntu questions | 12:14 |
| quofi | kk | 12:15 |
| MyFriend | ioria, it seems to have work, only open box, ubuntu and cwm show now | 12:15 |
| ioria | MyFriend, ok | 12:15 |
| MyFriend | so there is no way of moving the panel and launchers | 12:16 |
| IronDev | Hello | 12:21 |
| BluesKaj | Hiyas all | 12:32 |
| quofi | hello | 12:35 |
| === brusora_ is now known as brusora | ||
| kubanc | hello. Is it possible to have audio over HDMI (HDMI input is on motherboard) on UBuntu 15.10. I know it was not possible on UBuntu 15.04 | 12:41 |
| mcphail | kubanc: audio over hdmi has been possible for years... | 12:42 |
| mcphail | kubanc: certainly, nvidia and amd offer audio over hdmi. Not sure about intel | 12:42 |
| kubanc | mcphail, but I had problems when I installed Ubuntu 15.04. and as I know people from Ubuntu said that there are problems having only audio over HDMI on motheroard | 12:43 |
| mcphail | kubanc: so audio over hdmi but video over other ouput? | 12:43 |
| Mined | hey everyone! | 12:43 |
| lazaro_ | Hey There!! | 12:44 |
| Mined | Hows it hanging? | 12:44 |
| kubanc | mcphail, I have a separated graphic card (VIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1). and my motherboard with HDMi audio is ASrock Z77 Pro3 | 12:45 |
| kubanc | mcphail, and my video goes on two monitors (over VGA and DVI ) | 12:46 |
| mcphail | kubanc: that might be a problem, then. i presum you use the proprietary nvidia drivers? | 12:46 |
| kubanc | mcphail, see, I told you :D | 12:46 |
| mcphail | :) | 12:46 |
| kubanc | mcphail, how can I check which driver do I use? | 12:47 |
| TJ- | kubanc: if there are multiple audio output devices the only issue is that usually the one the user wants is not the default, but that can be configured | 12:47 |
| mcphail | TJ-: not sure that is the case for HDMI, as the audio is provided by the graphics drivers IIRC... | 12:48 |
| kubanc | mcphail, if I fo sudo lshw -c video I get this configuration: driver=nvidia | 12:49 |
| mcphail | kubanc: that's the proprietary one | 12:49 |
| BluesKaj | mcphail: the audio merely routed thru the gpu to the audio portion of the hdmi out | 12:50 |
| MrXXIV | "apt" process is apparently still active, I should stop using it, how do I terminate it? | 12:50 |
| kubanc | mcphail, If I open pavucontrol and I check "output devices" I have GF116 High definition Audio Controller Digidal stereo (HDMI) and port:HDMI/DisplayPort(unplugged) and the other onw is Built-in Audio Analog Stereo on port:Line Out(plugged in) | 12:51 |
| mcphail | BluesKaj: it has always required video driver support. You used to have to pass kernel parameters to the open-source video drivers to enable hdmi audio... | 12:51 |
| TJ- | mcphail: kubanc right, but if the audio driver has detected the audio channel it'll be available. do "aplay -L" to list all available ALSA sources and sinks | 12:51 |
| kubanc | mcphail, http://paste.ubuntu.com/14280723/ | 12:53 |
| mcphail | kubanc: looks encouraging. TJ- see the paste ^^. Can those Intel HDMI audio devices be persuaded to appear? | 12:55 |
| BluesKaj | kubanc: I avoid puseaudio as much as possible on my intel audio equipped pcs, it misdirects and can make audio routing difficut due to it';s extra layer of processing | 12:57 |
| === step21_ is now known as step21 | ||
| mcphail | kubanc: Out of interest, what happens if you select the "port:HDMI/DisplayPort(unplugged)" device? | 12:59 |
| kubanc | mcphail, nothing happens... | 13:00 |
| kubanc | in pavucontrol if I go into configuration and I look under GF116 High Definition Audio Controller and under Profile, all of the options have "unplugged" | 13:02 |
| TJ- | kubanc: mcphail can we see the "aplay -L" report too ? That's more useful in these circumstances | 13:03 |
| kubanc | TJ-, here is the "aplay -L" report: http://paste.ubuntu.com/14280723/ | 13:04 |
| TJ- | kubanc: no, that's "aplay -l" not "-L" | 13:05 |
| kalby | hello, can anyone tell how change screen size in ubuntu mate? | 13:05 |
| === step21 is now known as step21_ | ||
| kubanc | TJ-, mcphail here is the report of "aplay -l" http://paste.ubuntu.com/14280844/ | 13:10 |
| william__ | How do i disable sleep mode on ubuntu_ | 13:11 |
| TJ- | kubanc: which of the HDMI outputs is connected (the one you want to hear sound from) ? | 13:11 |
| kalby | hello, can anyone tell how change screen size in ubuntu mate? | 13:12 |
| lotuspsychje | kalby: maybe the #ubuntu-mate guys can help? | 13:12 |
| TJ- | kubanc: the 'aplay -L' output shows 3 HDMI outputs on the Intel PCH device | 13:12 |
| kubanc | TJ-, how cn I check which is the output on the motherborad? | 13:13 |
| TJ- | kubanc: may as well test them all. Start with "speaker-test -Dhdmi:CARD=PCH,DEV=0 -l 2 -c 2 -t wav " ... if you don't hear anything on that output, change "DEV=0" to "DEV=1", then if that doesn't work, "DEV=2" | 13:15 |
| TJ- | kubanc: you're expecting to hear "Front Left; Front Right" repeated twice | 13:16 |
| kubanc | TJ-, both DEV=1 and DEV=2 do not give me any sound, and If I try DEV=3 I get "Playback open error: -2,No such file or directory" | 13:17 |
| TJ- | kubanc: the aplay listing only shows 3 devices (0,1,2) so that is expected. If you heard nothing then the audio outputs could be muted (assuming the output is connected and active) | 13:18 |
| TJ- | kubanc: I would expect the video channel on that HDMI link needs to be active for the audio carrier to work | 13:19 |
| kubanc | TJ-, even if I set my amplifier to analog output from motherboard (which is playing sound from VLC OK) and If I try "speaker-test -Dhdmi:CARD=PCH,DEV=0 -l 2 -c 2 -t wav" od DEV=1 or DEV=1 I do not get any sound | 13:22 |
| TJ- | kubanc: that command directs the sound to one of the HDMI outputs, not analog | 13:23 |
| TJ- | kubanc: For default output testing use "speaker-test -Dfront -l 2 -c 2 -t wav " | 13:23 |
| kubanc | TJ-, yes, I hear sound with the command "speaker-test -Dfront -l 2 -c 2 -t wav" | 13:24 |
| TJ- | kubanc: is there HDMI video output from the motherboard to the monnitor when you're testing the HDMI audio? | 13:24 |
| kubanc | TJ-, no, my monitors are connected through VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1) (VGA and DVI output) | 13:25 |
| kubanc | TJ-, hm, maybe I have disabled motherboard video in my UEFI BIOS... | 13:25 |
| TJ- | kubanc: HDMI audio won't work unless there's also a video signal on the same output - that's the design of HDMI. It interleaves the audio data with the video data | 13:26 |
| kubanc | TJ-, could these be the problem? | 13:26 |
| kubanc | TJ-, with previus releases of Ubuntu, I had this kind of configuration, that I had video over GeForce GTX 550ti and my audio through HDMI audio on my motherboard | 13:26 |
| TJ- | kubanc: what external device was the motherboard HDMI connected to? | 13:27 |
| TJ- | kubanc: I'd suggest a basic test to prove audio is available from the motherboard, but connected an HDMI monitor to it. Once you've proved that, then move on to establishing a more complex configuration. | 13:29 |
| kubanc | TJ-, the my external device on which the HDMI is connected to is Sony STR-DH520 amplifier. this was working fine on previous UBuntu (releases under Ubuntu 14.04) | 13:30 |
| kubanc | TJ-, I can connect HDMI to Geforce GTX 550Ti.. | 13:30 |
| TJ- | kubanc: OK, so the receiver is intelligent - for this to work the PC needs to recieve an EDID that defines the audio output (with a 'dumb' device on the end of the HDMI it won't work) | 13:31 |
| kubanc | TJ-, now I have plugged in HDMI to NVIDIA graphic card and now in it foud IT | 13:31 |
| kubanc | TJ-, it found the HDMI/DisplayPort 2 (plugged in) in pavucontrol | 13:32 |
| glambert | Hi, I'm trying to rsync+ssh in a bash script that is provisioning a server and it's failing with "Permission denied, please try again." but when I run the exact command on the box it works fine. Both running as root. Any ideas? | 13:32 |
| TJ- | kubanc: look at "aplay -L" results now; you'll probably find that's due to a new device profile appearing | 13:33 |
| kubanc | TJ-, http://paste.ubuntu.com/14281042/ | 13:33 |
| TJ- | kubanc: but, as I said earlier, first connect a HDMI TV (or monitor the does video+audio) to the motherboard HDMI and prove that audio data is being sent and received and heard. There could be something basic like a codec problem, rather than an output issue | 13:34 |
| azizLIGHT | Did anyone get spam pm last night | 13:35 |
| azizLIGHT | From a user from this channel | 13:35 |
| cfhowlett | why? | 13:35 |
| azizLIGHT | Just curious if it was mass or some kind of targeted pm | 13:35 |
| kubanc | TJ-, If I start to play music in VLC in Pavucontrol I can see the sound bar going up and down... | 13:36 |
| Mined | what was it about? | 13:36 |
| azizLIGHT | Proselytizing islam | 13:36 |
| Mined | lol | 13:36 |
| Mined | gl with that | 13:36 |
| azizLIGHT | Yep. Might have been became of my nick | 13:37 |
| azizLIGHT | *because | 13:37 |
| Mined | perhaps. | 13:37 |
| Mined | its a c o o l and short nick, use it. | 13:37 |
| k1l_ | azizLIGHT: reports please to #ubuntu-ops | 13:37 |
| azizLIGHT | k1l_: will do | 13:37 |
| DJones | azizLIGHT: I think it was general spam from some bots that was kicked out of the channel | 13:38 |
| Mined | bot must be banned from by banning the IP range it is using | 13:38 |
| bartolomeo | /load .xchat2/budus.so | 13:38 |
| k1l_ | Mined: already done. lets focus on ubuntu support again | 13:38 |
| doom_ | My laptop crashed and I rebooted it the hard way. Now wireless stoped working. What should I do? | 13:38 |
| * Mined switches to support-mode | 13:39 | |
| mikaze | my problem yet complete | 13:39 |
| Mined | mikaze did you ask a question? trying to find | 13:39 |
| Capprentice | What server configuration is needed for Syslog Server? | 13:40 |
| cfhowlett | !server | Capprentice | 13:40 |
| ubottu | Capprentice: Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is !Trusty (Trusty Tahr 14.04) - More info: http://www.ubuntu.com/products/whatisubuntu/serveredition - Guide: https://help.ubuntu.com/lts/serverguide - Support in #ubuntu-server | 13:40 |
| kubanc | TJ-, I do not have a TV with HDMI audio and video... | 13:40 |
| mikaze | i was find that but every i try, it must be fail | 13:40 |
| Mined | mikaze what fails? | 13:41 |
| bartolomeo | usa BuDuScRiPt [ http://digilander.libero.it/udasoft/Software/Linux/buduscript ] | 13:41 |
| bartolomeo | Version 3.7.86 | 13:41 |
| bartolomeo | By U D A ' S o f t w a r e | 13:41 |
| mikaze | someone indonesian people here ? | 13:41 |
| cfhowlett | !indonesian | mikaze | 13:41 |
| ubottu | mikaze: join ke #ubuntu-id untuk membahas ubuntu dalam bahasa Indonesia | 13:41 |
| cfhowlett | mikaze, go to the indonesian channel | 13:41 |
| mikaze | ubottu : saya sudah mencoba masuk kesana, tapi tidak ada orangnya | 13:42 |
| ubottu | mikaze: I am only a bot, please don't think I'm intelligent :) | 13:42 |
| Mined | mikaze join #ubuntu-id instead of #ubuntu | 13:42 |
| mikaze | nobody people in indonesian channel | 13:42 |
| mikaze | oh,. ok i so sorry for that | 13:43 |
| Mined | no worries | 13:43 |
| Mined | but i wonder if you will get help over there, kind of empty channel | 13:43 |
| mikaze | i was join that your recomended , but nobody there | 13:44 |
| kubanc | TJ-, In the previous version on Ubuntu I had audio over HDA Intel PCH and not over Nvidia graphic card... | 13:44 |
| TJ- | kubanc: Hmm, that makes testing difficult. I wonder if installing a 14.04 kernel might be an alternative test scenario? If there has been a regression between 14.04 and 15.04 that would at least prove it *should* work | 13:45 |
| Mined | mikaze yes, sorry, i found the channel on ubuntu irc list on the net, but maybe u should try http://www.ubuntu-id.org/ | 13:45 |
| mikaze | mined : i was join in #ubuntu-id | 13:45 |
| kubanc | TJ-, as I see the first problem is that it does not found out when I connect HDMI cable to HDA Intel PCH | 13:48 |
| kubanc | TJ-, I did "alsactl -F restore" i got this, see report:http://paste.ubuntu.com/14281191/ | 13:51 |
| bakboter | does anny one know if you can remove full disk encryption form ubuntu 15.10 ? | 13:51 |
| cfhowlett | !encryption ! bakboter yes you can | 13:51 |
| ubottu | cfhowlett: I am only a bot, please don't think I'm intelligent :) | 13:51 |
| cfhowlett | !encryption | bakboter yes you can | 13:51 |
| ubottu | bakboter yes you can: For information on setting up encrypted private directories (8.10+) see https://help.ubuntu.com/community/EncryptedPrivateDirectory | 13:51 |
| MoPac | Hello. I've run into an issue on moving from the 4.2.0-22 kernel from 4.2.0-19. On -22, my CPU appears stuck in an 800MHz idle frequency, even after reboot and regardless of the governor. Choosing the -19 kernel at boot, the CPU works normally. i7-4510U / HP Envy x360. | 13:52 |
| MoPac | I'm wondering whether this issue has been spotted yet or whether there are other things for me to look at before I'm compelled to go down the rabbit hole of kernel bug reporting? I'm getting oops errors from the Launchpad site right now when trying to filter search results to see what's been submitted. | 13:52 |
| MoPac | Sorry, moving from -19 to -22 is when the issue appears. -19 is fine, -22 is broken | 13:52 |
| bakboter | that ubottu | 13:53 |
| bakboter | thanks* | 13:53 |
| bakboter | Ubottu i mean removing full disk encryption | 13:53 |
| ubottu | bakboter: I am only a bot, please don't think I'm intelligent :) | 13:53 |
| bakboter | @ ubottu can u remove full disk encryption | 13:54 |
| mikaze | mined: so my problem is the icon on the desktop so slow and i don't know why that, and every i want to change id in terminal with code "su" when i try to writing my password the answer from terminal is failure | 13:56 |
| * cfhowlett is learning to hate Google Translate with each passing moment ... | 13:56 | |
| Mined | mikaze seems like you have the wrong password? | 13:57 |
| MoPac | bakboter: hmm; I've just looked at the cryptsetup manual and am surprised to not see an obvious permanent decrypt option. Most of the management tools for LUKS full disk encryption can usually be accessed through some version of the cryptsetup command line program. | 13:58 |
| MoPac | bakboter: This is the Arch Wiki instruction for removing LUKS FDE https://wiki.archlinux.org/index.php/Removing_System_Encryption . | 13:59 |
| MoPac | That Arch thing looks more like a backup-restore method rather than decrypt-in-place, but I'm not an expert | 14:00 |
| mikaze | yep, like that, but if wrong password terminal will tell "the password incorrect" but it different terminal tell "failure" | 14:01 |
| mikaze | mined:yep, like that, but if wrong password terminal will tell "the password incorrect" but it different terminal tell "failure" | 14:01 |
| TJ- | kubanc: I think I have found an explanation for the lack of HDMI audio; it could be caused by the power-saving logic in the Intel video driver. That can be configured manually to disable it, which might enable the audio | 14:03 |
| MoPac | bakboter: These two answers both suggest that with LUKS, you have to copy the filesystem and restore it (can't permanently decrypt in place) https://unix.stackexchange.com/questions/60971/how-to-remove-luks-encryption | https://askubuntu.com/questions/245112/can-i-disable-full-disk-encryption | 14:03 |
| axsuul | one of my servers has been experiencing a sudden increase in outgoing traffic. I can't seem to track it down, what do you guys recommend I use to see what could be causing it? I suspect it could be due to a hack | 14:03 |
| cfhowlett | !server | axsuul | 14:04 |
| ubottu | axsuul: Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is !Trusty (Trusty Tahr 14.04) - More info: http://www.ubuntu.com/products/whatisubuntu/serveredition - Guide: https://help.ubuntu.com/lts/serverguide - Support in #ubuntu-server | 14:04 |
| kubanc | TJ-, i might find another answer for the HDA intel audio: Go to the ALSA Launchpad and download the package: oem-audio-hda-daily-dkms* for your distribution. Then install it and reboot. But as I can see the latest package is oem-audio-hda-daily-lts-wily-dkms - 0.201512301031~ubuntu14.04.1 and I have Ubuntu 15.10 | 14:04 |
| ikonia | axsuul: how are you measuring the traffic output ? | 14:04 |
| axsuul | I'm on Linode and there's a monitor that's been alerting me | 14:04 |
| axsuul | I'm on ubuntu 12.04 | 14:04 |
| TJ- | axsuul: start off with the logs, or use "tcpdump" , then use 'netstat' or 'ss' to identify what process is connected to the port(s) sending the packets | 14:04 |
| axsuul | I've tried using nethogs and iftop but couldn't track it down | 14:04 |
| kubanc | TJ- do you know how can I disable the power logic? | 14:05 |
| TJ- | axsuul: you're aware there's been an ongoing DDoS attack on Linode, and your node may be the subject of an amplifications attack? | 14:05 |
| axsuul | TJ-: ah was not aware of that | 14:05 |
| === onano is now known as mohit | ||
| ikonia | monitoring the tcp packets and feeding them into tools such as wireshark will give you an easy readable idea of what's going on the interface | 14:06 |
| axsuul | TJ-: but i'm also getting increased CPU usage as wel | 14:06 |
| === mohit is now known as onano | ||
| ikonia | you will if something is using your network | 14:07 |
| ikonia | as a process is working harder, the box is working harder | 14:07 |
| ikonia | look at what processes are taking your cpu resource | 14:07 |
| TJ- | axsuul: start off with "tcpdump -ni eth0" or similar and use it to pinpoint the suspect connections by local (server) port number(s)... then use "sudo netstat -ntup" to try to identify what process(s) own the local ports | 14:07 |
| axsuul | ok thanks will try that | 14:08 |
| TJ- | kubanc: can you show us "pastebinit <( lsmod; xrandr --verbose )" | 14:08 |
| kubanc | TJ-, http://paste.ubuntu.com/14281382/ | 14:10 |
| kubanc | TJ-, and this one is when I connect HDMI cable: http://paste.ubuntu.com/14281412/ | 14:12 |
| TJ- | kubanc: there were 2 things I was looking for there: 1. that the 'i915' module was loaded, but not required by anything else (dependency count = 0) which we have, which means we can actively unload/load that module with different paramaters. 2. An xrandr "audio:" option for the HDMI connectors (which I don't see) | 14:14 |
| kubanc | TJ-, what about this packages: https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+packages | 14:15 |
| === uruk is now known as aaaww14 | ||
| kubanc | TJ-, so what now? Is there any solution? | 14:17 |
| TJ- | kubanc: So, lets try altering the i915 driver config with "sudo modprobe -r i915 && sudo modprobe i915 disable_power_well=0" and then testing the audio with "speaker-test -Dhdmi:CARD=PCH,DEV=0 -l 2 -c 2 -t wav " | 14:17 |
| aaaww14 | how to install e4label? | 14:18 |
| kubanc | TJ-, after that there I do not here nothing... | 14:20 |
| k1l_ | aaaww14: see their website how to install | 14:21 |
| ahi2 | printer not showing up when searching network under lubuntu. always showed up under unity and xfce. any ideas? already went to #lubuntu | 14:22 |
| TJ- | kubanc: what does this report "sudo cat /sys/module/i915/parameters/disable_power_well " | 14:22 |
| k1l_ | aaaww14: but what do you need e4label for? | 14:22 |
| kubanc | TJ-, the result is "0" | 14:23 |
| Kartagis | cannot execute binary file: Exec format error <--- probably my adb id 64 bit. can I still run it? | 14:24 |
| Kartagis | s/id/is/ | 14:24 |
| k1l_ | Kartagis: adb? from the ubuntu repo? | 14:25 |
| === mist is now known as lolcat6 | ||
| Kartagis | k1l_: no, from android sdk | 14:25 |
| === tinyhippo is now known as lolcat7 | ||
| k1l_ | Kartagis: why not use the ubuntu one? | 14:26 |
| Kartagis | k1l_: I had no idea ubuntu provided an adb | 14:26 |
| === lolcat6 is now known as mist | ||
| TJ- | kubanc: OK, that confirms the setting was adopted. So it appears that won't solve it. Install a 14.04 Trusty kernel and boot with that as a test. In theory that should work, if so, it confirms there's a regression on the kernel modules, which at least isolates where to focus to fix it | 14:26 |
| cfhowlett | !info android-tools | 14:26 |
| ubottu | Package android-tools does not exist in wily | 14:27 |
| === lolcat7 is now known as tinyhippo | ||
| k1l_ | Kartagis: android-tools-fastboot and android-tools-adb | 14:27 |
| Kartagis | k1l_: I've already got android sdk. this will not overwrite anything, will it? | 14:27 |
| k1l_ | no | 14:27 |
| TJ- | kubanc: Is the PC using 32-bit or 64-bit binaries? | 14:29 |
| kubanc | TJ-, 64 | 14:30 |
| kubanc | TJ-, what if I try to install oem-audio-hda-daily-lts-wily-dkms | 14:31 |
| aaaww14 | k1l_ is for change label but the sinopsis is with e2label i supose that is for ubuntu and with red hat the command is e4label | 14:31 |
| k1l_ | aaaww14: redhat has a totally different setup. but why dont you just use (g)parted? | 14:32 |
| aaaww14 | ok | 14:32 |
| bartolomeo | .xchat2/budus.so | 14:33 |
| k1l_ | bartolomeo: dont do that commands in the channel window | 14:34 |
| kubanc | TJ-, I will look if in my EUFI BIOS I have disabled onboard graphic card. Perhaps this is why my HDMI Intel is not recognized... | 14:34 |
| cfhowlett | bartolomeo, xchat is obsolete and no longer developed or maintained. switch to hexchat | 14:34 |
| TJ- | kubanc: OK, to fetch the packages do "pushd $HOME/Downloads; wget http://archive.ubuntu.com/ubuntu/pool/main/l/linux/linux-headers-3.13.0-74_3.13.0-74.118_all.deb http://archive.ubuntu.com/ubuntu/pool/main/l/linux/linux-headers-3.13.0-74_3.13.0-74.118_all.deb" once they are downloaded you can install them with "sudo dpkg -i linux-headers-*.deb linux-image-*.deb" | 14:34 |
| bartolomeo | .xchat2/budus.so | 14:35 |
| TJ- | kubanc: You haven't; the i915 driver reports the HDMI interface and the snd-hda-codec-hdmi driver reports the audio interfaces | 14:35 |
| * TJ- sighs | 14:35 | |
| flux242 | hello | 14:37 |
| flux242 | is there somebody alive? | 14:39 |
| k1l_ | flux242: yes | 14:40 |
| BlackFate | !ask | flux242 | 14:40 |
| ubottu | flux242: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience | 14:40 |
| cfhowlett | !ask | flux242, ... and if we weren't the answer would be ... | 14:40 |
| ubottu | flux242, ... and if we weren't the answer would be ...: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience | 14:40 |
| flux242 | ah, ok, i thought i'm still kicked off | 14:40 |
| cfhowlett | not yet ... ask your ubuntu question | 14:40 |
| flux242 | right | 14:40 |
| flux242 | I'm using ubunt 15.10 and noticed that /etc/pm/sleep.d scripts arent' called at all | 14:41 |
| TJ- | kubanc: The firmware hasn't disabled anything; the i915 driver reports the HDMI interface and the snd-hda-codec-hdmi driver reports the audio interfaces | 14:41 |
| kubanc | TJ-, I would not like do downgrade to Ubuntu 14.04... Right now I just plugged the monitor into the onboard graphic card and I saw that the drivers are not properly installed because every time I tried to log in into Ubuntu I was sent back to login windows (so error with the display drivers). Perhaps this is why the on board HDMi audio is not working | 14:42 |
| BlackFate | flux242, http://askubuntu.com/questions/620494/ubuntu-15-04-suspend-doesnt-run-pm-suspend | 14:43 |
| cfhowlett | kubanc, no downgrade option in ubuntu. download the 14.04.3 .iso and clean install. | 14:43 |
| kubanc | cfhowlett, no way, I cannot do that... | 14:44 |
| MonkeyDust | kubanc downgrade is not possible and you cannot fresh, then you're running out out of options | 14:44 |
| MonkeyDust | fresh install* | 14:44 |
| === doomlord is now known as powerlord | ||
| flux242 | BlackFate: ah, the systemd again,ok,thanks | 14:46 |
| === powerlord is now known as drolmood | ||
| TJ- | kubanc: I haven't suggested a downgrade; I suggested installing the 14.04 kernels and booting with them as a test | 14:48 |
| mcphail | kubanc: your mobo display drivers won't work as you have the proprietary nvidia driver installed for your card. You're not going to be able to get a desktop on the mobo port just now | 14:49 |
| kubanc | TJ-, sorry, that was my mistake. In Ubuntu 14.04 my HDMI audio also did not work. But in previous version 12.04 LTS it worked fine with some modifications | 14:49 |
| === drolmood is now known as doomlord | ||
| kubanc | TJ-, If I look at alsamixer for HDA Nvidia S/PDIF S/PDIF 1 S/PDIF 2 and S/PDIF 3 have a value of volume "00" | 14:51 |
| kubanc | TJ-, I think I will open a new thread in Ubuntu forum. Can you please tell me what info should I put for information? | 14:57 |
| FriendlyStranger | test (please disregard) | 14:58 |
| travis_ | . | 14:59 |
| === Goddard is now known as Guest70403 | ||
| cfhowlett | !test | friendlydave | 15:02 |
| ubottu | friendlydave: Testing... Testing... 1. 2.. 3... ( by the way, remember that you can use /join #test ) | 15:02 |
| MonkeyDust | cfhowlett that factoid makes more noise than simply 'test' ... | 15:06 |
| HackerII | well said | 15:06 |
| cfhowlett | MonkeyDust, sad but true. I gave myself a smack on the hand ... | 15:07 |
| HackerII | I grew up in the 60"s & 70"s, people didnt show the amount of selfish disrespect at the level they do today. | 15:09 |
| MonkeyDust | HackerII the complaint about youth not showing respect, dates back to the ancient greeks... | 15:09 |
| HackerII | einstein nailed it | 15:10 |
| MonkeyDust | every generation says it about the new generation | 15:10 |
| HackerII | when technology overlaps with humanity, we will only have a generation of idiots. | 15:11 |
| kalby | hello | 15:12 |
| MonkeyDust | HackerII that sounds like a Douglas Adams quote | 15:13 |
| === regedit is now known as Google | ||
| === Google is now known as Guest28782 | ||
| === Guest28782 is now known as regedit | ||
| KingOfOOP | I've got problem using mysql installed on my terminal. | 15:27 |
| KingOfOOP | During the installation of mysql it requested me to set a password for the database but it gave me 1045 erro. | 15:28 |
| KingOfOOP | but after skipping the questions and a reinstall of the package the result was the same after using the command mysql -u root | 15:29 |
| Jonii^ | Hello. I'm trying to make acpi script to handle laptop screen being rotated around | 15:29 |
| Jonii^ | I think I figured out acpi event that fires when rotation state changes, and I made a script... But it doesn't seem to fire | 15:30 |
| Jonii^ | Also, how do you detect if your laptop has shut keyboard down? xinput list doesn't seem any different | 15:30 |
| Jonii^ | What other ways I would have to detect change in keyboard state, I understand it's built into hardware that when screen rotates 190 degrees or more, keyboard shuts down | 15:31 |
| Jonii^ | Regarding acpi script, it's event=pnp0c14:01 , action=/etc/acpi/myfile.sh. myfile.sh works just as it should, but doesn't get activated :( | 15:33 |
| Jonii^ | I used acpi_listener to catch that event name. I think it's correct :3 | 15:34 |
| MoPac | Hello. I've run into an issue on moving to the 4.2.0-22 kernel from 4.2.0-19. On -22, my CPU appears stuck in an 800MHz idle frequency, even after reboot and regardless of the governor. Choosing the -19 kernel at boot, the CPU works normally. i7-4510U / HP Envy x360. | 15:35 |
| MoPac | I'm wondering whether this issue has been spotted yet or whether there are other things for me to look at before I'm compelled to go down the rabbit hole of kernel bug reporting? I'm getting oops errors from the Launchpad site right now when trying to filter search results to see what's been submitted. | 15:35 |
| avz | so quite | 15:37 |
| TJ- | Jonii^: have you read the TROUBLESHOOTING section of "man 8 acpid" ? | 15:38 |
| Jonii^ | nope | 15:39 |
| TJ- | MoPac: have you looked at the git commit delta between those versions? | 15:49 |
| MoPac | TJ-: I haven't - I'll check now | 15:49 |
| ioria | MoPac, do you have cpufreqd installed ? | 15:51 |
| MoPac | TJ-: Is there a good link of where to look for the commits? I'm a little confused by the launchpad structure | 15:52 |
| TJ- | MoPac: I've just generated the URI for you: http://kernel.ubuntu.com/git/ubuntu/ubuntu-wily.git/log/?qt=range&q=Ubuntu-4.2.0-19.23..Ubuntu-4.2.0-22.27 | 15:52 |
| MoPac | ioria: I use cpupower and an indicator-cpufreq (I think?); I don't know about cpufreqd | 15:52 |
| MoPac | TJ-: thanks | 15:52 |
| ioria | MoPac, dpkg -l cpufreqd | 15:53 |
| MoPac | ioria: Cheers. No, it's not installed | 15:53 |
| ioria | MoPac, ok, nvm | 15:54 |
| MoPac | I guess I had thought that cpupower took over all the cpufreq stuff | 15:54 |
| ioria | maybe | 15:54 |
| yellowmoneybank | hi | 15:55 |
| === ^CJ^ is now known as ^cj^ | ||
| MoPac | TJ-: ioria: I don't see anything obvious in the commits, but most of them are a bit over my head | 15:56 |
| TJ- | MoPac: me neither. Did I get the versions correct? | 15:57 |
| ioria | MoPac, what is this cpupower ? from linux-tools-common ? | 15:58 |
| MoPac | TJ-: I think so -- Synaptic says that my latest installed is *-22.24, and the current (working) kernel I'm running, which is the second choice on boot, is -19 #23 | 15:58 |
| MoPac | ioria: I think that's where I got it | 15:59 |
| ioria | !info linux-tools-common | 15:59 |
| ubottu | linux-tools-common (source: linux): Linux kernel version specific tools for version 4.2.0. In component main, is optional. Version 4.2.0-22.27 (wily), package size 101 kB, installed size 247 kB | 15:59 |
| MoPac | AUTHORS | 15:59 |
| MoPac | --perf-bias parts written by Len Brown <len.brown@intel.com> | 15:59 |
| MoPac | Thomas Renninger <trenn@suse.de> | 15:59 |
| MoPac | 15:59 | |
| MoPac | 07/03/2011 CPUPOWER(1) | 15:59 |
| === [UPA]Stefan is now known as Tronsha | ||
| MoPac | ^ sorry for formatting | 16:00 |
| MoPac | And I use indicator-cpufreq for manually switching governors | 16:01 |
| ravster | Hello all | 16:03 |
| ioria | MoPac, so in few words are you stuck at 800 mhz ? | 16:03 |
| elisto | supp | 16:03 |
| tusharkumar | ravster, hello | 16:04 |
| MoPac | ioria: Yes; at least that's what I found last night while running the new kernel. I restarted and had the same condition. Restarted again, chose -19, and that's what I'm using now, functioning normally | 16:04 |
| ioria | MoPac, idk, try to purge indicator-cpufreq and linux-tools-common ... if it works , reinstall them | 16:07 |
| MoPac | ioria: I'll give it a shot later on when it's more convenient to do restarts; thanks | 16:08 |
| === step21_ is now known as step21 | ||
| ioria | MoPac, np, good luck | 16:08 |
| === xubuntu is now known as Guest80923 | ||
| Jonii^ | naming of acpi events is confusing to me | 16:12 |
| Jonii^ | Like, this event I'm interested in seems to start with whitespace. | 16:12 |
| madsy | Cheesetracker seems to be gone from Ubuntu 14.04. Are there any other music trackers available for Trusty? | 16:19 |
| Canon | looking for the package that minicom is in.... any ideas what it is | 16:19 |
| bgardner | Canon: Er, "minicom"? | 16:21 |
| xangua | !locate minicom | 16:21 |
| kyle__ | stupid user question: when the mouse gets stuck on the window-resize cursor, and refuses to work as anything, how do you get it to revert back to normal? | 16:21 |
| kyle__ | I can alt-tab between apps still, and still use the keyboard, but not the mouse. Argh. | 16:22 |
| xangua | Mmm what what the factoid.. | 16:22 |
| bgardner | !info minicom | 16:22 |
| ubottu | minicom (source: minicom): friendly menu driven serial communication program. In component universe, is optional. Version 2.7-1 (wily), package size 220 kB, installed size 1020 kB | 16:22 |
| kyle__ | minicom.py also comes with python's serial library, and is available in apt. Really simple, probably already there. | 16:23 |
| kyle__ | Sorry, miniterm.py. Brain not working. | 16:24 |
| === step21 is now known as step21_ | ||
| Jonii^ | Uh, so... | 16:29 |
| Jonii^ | I think there is no event name for, rather, pnp0c14:01 is the first parameter... Maybe that's the problem? | 16:30 |
| Jonii^ | There seems to always be 4 parameters total. My event only has 3 :/ | 16:31 |
| Jonii^ | it's pnp0c14:01 000000b0 00000000 | 16:31 |
| lewq | heya. I'm running xenial daily (from yesterday), and hdmi audio output is all playing at half-speed/half-frequency. any ideas? | 16:34 |
| lewq | machine clock seems to be running at normal speed, fwiw | 16:35 |
| c_smith | lewq, you're going to want to head to #ubuntu+1 for any issues regarding alphas and betas | 16:36 |
| lewq | c_smith: thanks! | 16:36 |
| c_smith | lewd | 16:36 |
| c_smith | *lewq np | 16:37 |
| === Guma is now known as Guma_away | ||
| === mohit_ is now known as Darkseid | ||
| === Guma_away is now known as Guma | ||
| dkelman | hi! does anyone here know how i curl a base 64 file? | 17:07 |
| Bhavesh | I don't understand why the unity-tweak-tool doesn't work | 17:08 |
| Bhavesh | on Ubuntu 15.10 | 17:08 |
| Bhavesh | I installed it using sudo apt-get install unity-tweak-tool | 17:08 |
| Bhavesh | when I open it, go to themes and select Numix, nothing happens. | 17:08 |
| Bhavesh | like, nothing. | 17:08 |
| Bhavesh | when I launch unity-tweak-tool from the terminal. It doesn't show any error messages either | 17:09 |
| telboon | anyone managed to align Desktop icons to grid on Ubuntu? | 17:09 |
| telboon | apparently the default setting only align them horizontally, but not vertically | 17:09 |
| dontknow | Bhavesh, 15.10 is not stable | 17:11 |
| baizon | dontknow: yes it is stable | 17:12 |
| dontknow | baizon, it is for testing obviously | 17:12 |
| baizon | Bhavesh: then report it to the unity-tweak tool launchapd page | 17:13 |
| TJ- | dontknow: you obviously don't know! 15.10 is the current release version | 17:13 |
| dontknow | 14.04 is stable | 17:13 |
| dontknow | TJ-, current release version doesn't mean it is stable | 17:13 |
| TJ- | dontknow: Yes, it does. 14.04 is Long Term Support; 15.10 is a 'stable' release but only supported for 9 months | 17:15 |
| baizon | dontknow: 15.10 is STS, 14.04 is LTS, thats the only difference when it comes to "stability" | 17:15 |
| dontknow | i don't think so. whatever. have fun | 17:16 |
| MatthewAllen | Can someone me a hand, I submitted a merge request on Launchpad on the 24th and have had no reply? Is that normal? https://code.launchpad.net/~whosdaz/ubuntu/wily/wajig/docfix/+merge/281339 | 17:16 |
| rsync | https://www.youtube.com/watch?v=G3bn24qdZ7c | 17:16 |
| dontknow | rsync, why do you send youtube link? | 17:18 |
| compdoc | rsync is a crazy person | 17:20 |
| TJ- | dontknow: see https://wiki.ubuntu.com/StableReleaseUpdates for an explanation | 17:20 |
| dontknow | TJ-, any specific highlight | 17:24 |
| durant | Does ubuntu support 4 monitors | 17:27 |
| TJ- | durant: Yes | 17:31 |
| assasin9000 | hola | 17:31 |
| assasin9000 | soy nuevo | 17:32 |
| assasin9000 | alguien aqui juega counter strike? | 17:32 |
| bgardner | !es | assasin9000 | 17:32 |
| ubottu | assasin9000: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro. | 17:32 |
| brandnewbian | test | 17:39 |
| brandnewbian | guys, I dont wanna be a douche, but whats the secret to posing in #debian? | 17:40 |
| brandnewbian | posting | 17:40 |
| yeats | brandnewbian: you'll need to ask that in #debian :-) | 17:40 |
| brandnewbian | lol the irony is think | 17:40 |
| John[Lisbeth] | brandnewbian: what do you mean "the secret"? | 17:40 |
| compdoc | brandnewbian, you registered? | 17:40 |
| compdoc | your nick | 17:41 |
| TJ- | brandnewbian: registered nick-name, and *NOT* having "root" in your IDENT | 17:41 |
| brandnewbian | " | 17:41 |
| brandnewbian | * #debian :Cannot send to channel" | 17:41 |
| k1l_ | dont run irc as root i guess. better ask in #freenode | 17:41 |
| brandnewbian | jokes on them, im using windows har har | 17:41 |
| John[Lisbeth] | still, irc is not meant to be run as administrator | 17:42 |
| TJ- | brandnewbian: yeah; it's a pretty stupid arbitrary block-filter | 17:42 |
| brandnewbian | oh ok its a filter cuz my username is root? | 17:42 |
| TJ- | brandnewbian: correct | 17:42 |
| brandnewbian | thanks so much1 | 17:42 |
| durant | witch company makes the best wifi pci cards for linux | 17:44 |
| pauliunas | hi, i have a problem with ubuntu gnome 15.10. i have a tablet, and i want to get emulated right-click working on it, that is when i hold my finger on the screen, it should trigger the right-click functionality of whatever app i'm in. i have enabled this in universal access settings, but it just doesn't work. although this is not the gnome chat, it's more active and the base system is ubuntu | 17:44 |
| pauliunas | anyway | 17:44 |
| TJ- | durant: that's debatable, but for open-source drivers without closed firmware Atheros are often mentioned. Intel likewise, although they had a spell of having poor drivers for 802.11n which seems to be overcome now | 17:45 |
| orq | can i execute here scripts ?? | 17:46 |
| k1l_ | orq: no | 17:46 |
| orq | why is "load plugin or script" here ?? | 17:47 |
| pauliunas | here where? | 17:47 |
| k1l_ | orq: context? | 17:47 |
| orq | in ... | 17:48 |
| pauliunas | in? | 17:48 |
| malgorath | Was wondering if I could get some help, I have a new i7 6700K lga 1151 computer and it runs windows 10 professional just fine. But whenever I try to install Ubuntu 15.10 x64 on it, I get to the screen to select install or try, and either options off the booted ISO(Usb) go to a glowing black screen and nothing works after that. Any help would be apperciated as I can't even install anything yet | 17:48 |
| malgorath | I have fast boot disabled, and I have tired it with and without legacy mode, same issue | 17:48 |
| orq | xchat next to View | 17:48 |
| k1l_ | orq: you are not making any sense. no, you are not allowed to run annoying scripts in #ubuntu. this is plain ubuntu support related | 17:49 |
| dontknow | malgorath, have you disabled secure boot | 17:49 |
| orq | ok im just wondering | 17:50 |
| malgorath | dontknow, yes, can't use legacy while in secure boot mode | 17:50 |
| brandnewbian | guys is there a bootable util i can put on a stick that will read alternate boot partitions not in th mbr? | 17:51 |
| malgorath | I have even uplugged second monitor | 17:51 |
| MoofMoof | Hello. How can I see the last edited date of a man page? | 17:51 |
| MoofMoof | This man page does not have copyright info at the top | 17:51 |
| MoofMoof | ( dhcpd.conf ) | 17:52 |
| TJ- | brandnewbian: are you talking about a device with a hybrid MBR, that is primarily GPT? | 17:53 |
| Bashing-om | !nomodeset | malgorath Have you tried | 17:53 |
| ubottu | malgorath Have you tried: A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter | 17:53 |
| orq | anybody who want to write with me ?? | 17:54 |
| pauliunas | write what? | 17:54 |
| brandnewbian | tj- im not even sure. I'm trying to truecrypt a multiboot system with a single physical harddrive. I need to install grub to anywhere but the mbr then paste its entry into the win 7 bootloader to accomplish this. So yeah, I'm looking for a bootloader on a stick with like.. auto recognize? | 17:54 |
| orq | i dont understand the void pointer is there any good introduction ?? | 17:55 |
| orq | in the internet | 17:55 |
| brandnewbian | tj- cuz whichover OS i install wants to be the bootloader, but I can only use the win7 loader with tc. | 17:56 |
| locksmith | Hi guys --- what is a good terminal emulator that's not the gnome terminal one | 17:56 |
| locksmith | ? | 17:56 |
| locksmith | but they all suck | 17:56 |
| TJ- | brandnewbian: GRUB can do truecrypt you know | 17:57 |
| locksmith | can't handle screen + mouse scrolling right, etc.. | 17:57 |
| orq | ?? | 17:57 |
| brandnewbian | tj- really?? | 17:57 |
| brandnewbian | hrmm lemme google that | 17:57 |
| orq | void pinter | 17:58 |
| orq | *pointer | 17:58 |
| relish | orq what void pointer? in c? as in (void *) ? | 17:58 |
| orq | sorry yes in c | 17:58 |
| relish | did you google for void pointer ? | 17:59 |
| relish | http://www.learncpp.com/cpp-tutorial/613-void-pointers/ | 17:59 |
| brandnewbian | tj- do you have a good link for this? because the only stuff I find it seperate encryption scheme, like tc for windows, and encrypted volume for linux. I want the whole drive system encryted with tc | 17:59 |
| orq | yes and in stack overflow but this is too specific and i buyed the book mastering algorithms with c and to understand this book i need the knownlege of void pointers | 18:01 |
| orq | thank you for the link | 18:01 |
| TJ- | brandnewbian: you want to encrypt the disk including partition table? | 18:01 |
| relish | pointers point to something. that something usually has a type | 18:01 |
| relish | a void pointer is like an anonymous pointer. it can point to anything | 18:01 |
| pauliunas | orq: try ##C ? | 18:02 |
| TJ- | brandnewbian: GRUB has a 'truecrypt' module which can be included in GRUB's core.img. I use LUKS/dm-crypt myself, but LUKS/truecrypt is also possible. I've not used GRUB/truecrypt myself though. | 18:03 |
| Jonii^ | Hey, I'm trying to make acpi hook script work, but can't. I don't quite understand the format for acpid files | 18:03 |
| TJ- | Jonii^: are you running acpid with "--logevents" so you can be sure the events you're expecting are being received? | 18:04 |
| Jonii^ | That's kinda the thing, I'm fairly sure my event format is wrong, because the first of 4 parameters is missing | 18:05 |
| Jonii^ | And event format seems to require that first item specifically | 18:05 |
| relish | i have a lenovo idea pad which has a very small ssd hard drive. it's running ubuntu trusty. i'd like to upgrade but during the upgrade it runs out of disk space. i'd tried with cleaning up disk etc. but it's still failing. | 18:06 |
| relish | can i mount a 2TB usb drive and use this as temp during upgrade? | 18:06 |
| Jonii^ | Like, to me it seems like it's 4 parameters, name, some code, then twice 64bit hexadecimal code | 18:06 |
| Jonii^ | Event I'm listening for only has that code + twice 64bit hexadecimal | 18:07 |
| Bashing-om | relish: Pops to mind that /boot is full of old kernels. What does ' df -h ; df -i ' reveal ? | 18:07 |
| Jonii^ | I don't know how the syntax works in that case. I find no examples either | 18:07 |
| TJ- | Jonii^: with "--logevents" acpid will write to the system log-file when an event is received, regardless of whether there is a handler script. If you are sure the event is arriving, then maybe run acpid with "--debug" (in the foreground) and monitor what it does. I think multiple --debug options will increase verbosity, and should track the calling of event scripts | 18:08 |
| Jonii^ | the event is arriving, via netlink, and it's " pnp0c14:01 000000b0 00000000" | 18:10 |
| Jonii^ | the first whitespace is the problematic part :/ | 18:10 |
| TJ- | Jonii^: as per "man acpid" .. "...The event value is a regular expression (see regcomp(3)), against which events are matched ..." | 18:11 |
| relish | i'm not sure where to mount the usb drive. where is do-release-upgrade eating up disk space? | 18:11 |
| Jonii^ | TJ-: so it says, however, every single example i can find only does full match on param #1, or just use asterisk to match everything | 18:12 |
| uciel | hi! | 18:12 |
| TJ- | relish: you could over-mount a file-system from the USB to /var/cache/apt/ (that'll allow all the downloaded packages to sit on the external device) | 18:12 |
| Jonii^ | Should I just have "event=" ? | 18:12 |
| Jonii^ | Because first param is null, and it matches only first param? | 18:13 |
| TJ- | Jonii^: look at the existing files in /etc/acpi/event/ for (presumably working) examples | 18:13 |
| uciel | hey, i'm having issues trying to automount a ntfs partition | 18:13 |
| Jonii^ | TJ-: yes, I did. Like I said, they all follow that format. Hence me asking here | 18:13 |
| uciel | it mounts automaticaly but | 18:13 |
| uciel | i cant eat it | 18:13 |
| uciel | you know | 18:13 |
| relish | TJ thanks. I'll give it a try | 18:13 |
| uciel | and de owner is root | 18:13 |
| uciel | and i cant delete any files in the partitioi | 18:14 |
| longwuyuan1 | hi, atheros wifi on the latest lenovo series. has it worked for anyone after following the bug related docs for the packported deb | 18:14 |
| TJ- | Jonii^: there has to be something for 'event=' to match on | 18:14 |
| Jonii^ | But it's null. param #1 is empty | 18:15 |
| TJ- | Jonii^: as the man-page says, the match is a regular expression, so just write one to match what arrives | 18:15 |
| riqdiiz | hi all my hp 650 with win7 wont install ubuntu ultimate and hangs forever !how di | 18:17 |
| riqdiiz | how do i go about it? | 18:17 |
| MatthewAllen | riqdiz, What screen does it hang on? Where did you download ubuntu from? | 18:20 |
| riqdiiz | tried to install xp sp3 ended up with blue screen of death. | 18:21 |
| ioria | xp ? | 18:21 |
| MatthewAllen | wait, are you installing XP or Ubuntu??? | 18:21 |
| riqdiiz | i want ubuntu ultimate in.help! | 18:22 |
| TJ- | Jonii^: I just created a test script here to capture multimedia key events; that doesn't fire | 18:23 |
| ioria | riqdiiz, what you mean with 'ultimate'... 15.10 ? | 18:23 |
| MatthewAllen | riqdiiz, I'd reccomend simply installing the LTS version of Ubuntu | 18:23 |
| Jonii^ | TJ-: okay, sounds familiar | 18:24 |
| TJ- | Jonii^: I'm wrong; it is working! | 18:25 |
| TJ- | Jonii^: I also stopped the acpid service, then ran it in the foreground with "acpid -ddd" and saw it reporting it accessing my shell script | 18:25 |
| kalby | what you guys do in ubuntu most of the times other than coding? | 18:26 |
| TJ- | Jonii^: and using "acpid --logevents -ddddd" I see the events too | 18:26 |
| orq_ | kalby are you a woman | 18:27 |
| TJ- | Jonii^: here's a fragment from the debug output: http://paste.ubuntu.com/14286738/ | 18:28 |
| kalby | orq: are you? | 18:28 |
| orq_ | no | 18:28 |
| kichuku | Hello | 18:28 |
| bgardner | kalby: Anything you do with Mac or Windows, pretty much. | 18:28 |
| kalby | orq: good cause i aint too | 18:28 |
| kichuku | Can somone please tell me what "sudo shutdown now" command in Ubuntu does? | 18:28 |
| kichuku | Does it poweroff the machine or does it do somethng else? | 18:29 |
| kalby | bgardner: i do some coding here with javascript, anyone has an idea for the best editor? | 18:29 |
| wyaterp | 13:08 < TJ-> Jonii^: with "--logevents" acpid will write to the system log-file when an event is received, regardless of whether there is a handler script. If you are sure the | 18:29 |
| wyaterp | 13:08 < TJ-> Jonii^: with "--logevents" acpid will write to the system log-file when an event is received, regardless of whether there is a handler script. If you are sure the | 18:29 |
| wyaterp | 13:08 < TJ-> Jonii^: with "--logevents" acpid will write to the system log-file when an event is received, regardless of whether there is a handler script. If you are sure the | 18:29 |
| relish | kichuku yes, it will reboot your machine | 18:29 |
| kichuku | Because in a Ubuntu VM, when I run "sudo shutdown now" command, it does not poweroff the machine. | 18:29 |
| kichuku | relish: reboot? | 18:29 |
| kichuku | then what does "sudo shutdown -r now" does? | 18:30 |
| relish | ah no shutdown | 18:30 |
| orq_ | kalby bluefish editor | 18:30 |
| TJ- | Jonii^: these are the event/script files: http://paste.ubuntu.com/14286813/ | 18:30 |
| kalby | i was using ubuntu for doing exploit also, couldnt really work out to penetrate others | 18:30 |
| relish | -r should reboot the machine | 18:30 |
| kalby | orq: thank you | 18:30 |
| orq_ | its pretty good i use it too | 18:31 |
| orq_ | so you make penetrations tests calby | 18:31 |
| orq_ | *kalby ?? | 18:31 |
| Jonii^ | acpid doesn't work it seems..? | 18:31 |
| Jonii^ | not sure if I broke it or what :3 | 18:31 |
| kalby | orq: basic things tho, i aint so expert about it, i was using metasploit framework | 18:32 |
| Bashing-om | kichuku: Your post ? http://ubuntuforums.org/showthread.php?t=2308001 ; as a similar query . | 18:32 |
| orq_ | ohh ok intresting | 18:32 |
| kalby | orq: private would you | 18:32 |
| orq_ | ? | 18:33 |
| kalby | orq: if you are interested to talk about it | 18:33 |
| jack098 | hi | 18:34 |
| jack098 | what do we discus here | 18:34 |
| TJ- | Jonii^: what does "doesn't work" mean? | 18:34 |
| Jonii^ | https://forum.antergos.com/topic/303/help-with-acpid/2 looks very much like this | 18:35 |
| kalby | jack098: can you tell me the channel which is talking about penetration test? | 18:36 |
| jack098 | kalby i dont know i am new here | 18:36 |
| TJ- | Jonii^: did you STOP the acpid service before running it manually? | 18:37 |
| Jonii^ | nope :3 | 18:37 |
| kalby | jack098: okay then | 18:37 |
| Jonii^ | How do I stop it? :3 | 18:38 |
| TJ- | Jonii^: with the init service manager. | 18:38 |
| TJ- | Jonii^: what ubuntu release is it? | 18:38 |
| Jonii^ | TJ-: 15.10 | 18:39 |
| TJ- | Jonii^: "sudo systemctl stop acpid.service" | 18:39 |
| xubuntu | hi everybody | 18:39 |
| === xubuntu is now known as Guest49201 | ||
| Jonii^ | Doesn't change anything | 18:39 |
| fartface | If my server's running ~570 processes, only 1 active, but CPU utilization is like 99% idle, should I be concerned? | 18:41 |
| fartface | It looks like a ton of processes spawned by RCU | 18:42 |
| TJ- | Jonii^: have you left other acpid instances running? "pgrep acpid" | 18:42 |
| Jonii^ | Uh | 18:43 |
| === anonymous is now known as Guest50699 | ||
| Jonii^ | I don't know why it started working | 18:43 |
| Jonii^ | It works now, for some reason | 18:43 |
| Guest50699 | what works? | 18:43 |
| TJ- | Jonii^: did you restart the acpid after editing the events/ file? | 18:43 |
| === dreamon__ is now known as dreamon | ||
| Osz | How do i connect to wireless with my ubuntu server 12.04? | 18:43 |
| TJ- | Jonii^: as far as I could tell, the daemon must be restarted manually; it doesn't monitor /etc/acpi/events/ for changes to the files | 18:44 |
| Jonii^ | I've used sudo kill -HUP acpid as suggested by man files | 18:44 |
| Jonii^ | Also I've restarted a couple of times just to be sure | 18:45 |
| TJ- | Jonii^: the correct way to do it is "sudo systemctl restart acpid.service" | 18:45 |
| TJ- | Jonii^: possibly that plus a recent change to the file(s) has fixed it | 18:45 |
| ioria | Osz no gui ? | 18:47 |
| TJ- | Osz: Either using NetworkManager, or you can manually configure it via /etc/network/interfaces with wpa_supplicant | 18:48 |
| Jonii^ | Okay, but, next problem: How do I detect if I have keyboard on or off? | 18:50 |
| Jonii^ | xinput doesn't detect it | 18:50 |
| Jonii^ | what other choices do I have? | 18:50 |
| fl4sh | hi, what is the best way to watch bluray from file? | 18:50 |
| Jonii^ | i'll restart, let's see what happens.. | 18:50 |
| Jonii^ | TJ-: uh, I need to manually start acpid as root for my script to work? | 18:53 |
| Jonii^ | Any ideas? That daemon should, as far as I know, be always running, with root privileges, so I don't understand why I need to manually enter "sudo acpid" to make my script work | 18:54 |
| MelRay | I have a strange problem. I have logged out and back in using my password. However when I use the command line (xubuntu 15) and try to use apt-get it is saying that the user is not in the sudoers file. How can this be possible? | 18:55 |
| TJ- | Jonii^: is there some unusual config for acpid ? | 18:55 |
| MelRay | Doesn't xubuntu install with sudo enabled? | 18:55 |
| relish | MelRay check the file /etc/sudoers | 18:56 |
| Jonii^ | I only have used my computer for a day, and I've only used acpid to make that one script | 18:56 |
| Jonii^ | It's pretty much perfectly fresh install | 18:56 |
| MelRay | relish: Ok but I am unsure how to add the user back in? | 18:56 |
| relish | as a default, users of group admin may gain root privileges | 18:57 |
| relish | in /etc/sudoers: entry %admin ALL=(ALL) AL | 18:57 |
| TJ- | Jonii^: OK, edit /etc/default/acpid, add in " OPTIONS="--logevents" " then restart the service and monitor syslog with "sudo tail -f /var/log/syslog" and cause the events | 18:58 |
| relish | check if your user is member of admin group: id username | 18:58 |
| ilhami | !lenovo | 18:59 |
| ilhami | !lenovopowermanager | 18:59 |
| ilhami | :D | 18:59 |
| TJ- | relish: MelRay it's usually the "sudo" group. Do "groups" to discover which groups the current user belongs to | 18:59 |
| MelRay | TJ: Thanks | 18:59 |
| ilhami | !jupiter | 19:00 |
| ilhami | this bot does not have so much knowledge. :D | 19:00 |
| ikonia | ilhami: you know how to use the bot, stop messing around | 19:00 |
| ilhami | ok ikonia | 19:01 |
| ikonia | thank you | 19:01 |
| MelRay | TJ: So it shows I'm not in the sudo group...problem then becomes how do I elevate to root so I can execute usermod and put the user back? | 19:02 |
| Osz | well ubuntu was able to see my wireless SSID but cant authenticat :S what could be the reason? | 19:04 |
| Jonii^ | uh, i might be gonna sleeping soon. | 19:05 |
| Jonii^ | ty for help TJ- | 19:05 |
| === Gabbo is now known as Guest43 | ||
| TJ- | MelRay: reboot, hold down Shift continuous, get to GRUB boot menu, select Advanced... sub-menu, then a "Recovery" option. At the friendly-recovery menu remount the file-system read/write, then drop to a root shell and do "adduser <THE_USER> sudo" ... then type "exit" and choose "resume" | 19:06 |
| MelRay | TJ: Ok thank you so much! | 19:06 |
| TJ- | MelRay: if... | 19:06 |
| MelRay | TJ: yes? what is the "if..."? | 19:07 |
| TJ- | MelRay: ... on the friendly-recovery menu there isn't a 'remount read/write' or similar option, drop to the root shell and do "mount -o remount,rw /" | 19:07 |
| MelRay | TJ: Ok I will | 19:07 |
| TJ- | MelRay: (I can't recall if there is a remount option on that menu) | 19:07 |
| MelRay | TJ: No problem I can try and work with it from here... | 19:08 |
| === qwerty is now known as Guest98405 | ||
| Osz | I cant connect to my wireless, every time i try to connect the thing will be spining and ask me for the password again. | 19:21 |
| SuperLag | I want to hold a package at a certain version. I'm already looking at https://help.ubuntu.com/community/PinningHowto. My question is this. I have a meta-package that brings in several others. Is it enough to pin that meta-package alone, or do I have to do everything else too? | 19:33 |
| SuperLag | package in question: cuda (which brings in a bunch of Nvidia stuff. | 19:33 |
| SuperLag | ) | 19:33 |
| TJ- | SuperLag: the pinning is per-package as you'd expect; it doesn't propagate to dependencies | 19:43 |
| mrsam_ | hi ANYBODY can see my chat? | 19:46 |
| sdk | nop :P | 19:46 |
| mrsam_ | SDK : :D | 19:46 |
| mrsam_ | tnx i ithink any body cant see | 19:47 |
| adolan | whois adolan | 19:47 |
| mrsam_ | SDK : im in the other ubuntu IRC? | 19:47 |
| sdk | the other irc? | 19:49 |
| mrsam_ | SDK : yeah | 19:49 |
| mrsam_ | SDK : there are many people and they speak about theirs problem | 19:49 |
| khronics | I have been searching for days for a fix to my problem. New laptop, new install. Everything works great but I can not get the suspend feature pm-suspend to work at all | 19:52 |
| khronics | very frustrating to have to shutdown every time I step away | 19:53 |
| khronics | screen goes black for about 2 seconds then it wakes itself up | 19:53 |
| OerHeks | khronics, syspend issues are well known, i would use the lock feature, ctrl alt L | 19:54 |
| OerHeks | err suspend | 19:54 |
| khronics | there has to be a way to fix it, lock screen is great and all but not when your running on a battery | 19:54 |
| netzapper | I'm having a problem with audio in 15.10. PulseAudio does not show my microphone input any place that I know to look, but alsamixer *does* show it. The card that the input is on *is* shown by PA, just not the input itself... only inputs shown are "monitor" inputs. | 19:55 |
| netzapper | any idea where to look? Googling pretty much just has people who either don't know how to enable a PA mic, or people whose inputs (or cards) aren't even detected by ALSA. Only found one guy who was having this problem and solved it... he purged and reinstalled PulseAudio. This hasn't done anything for me. | 19:57 |
| KingOfOOP | I've updated google chrome via terminal and it was 470MB which took 3h 22min and used 612 Get command. | 20:05 |
| KingOfOOP | Speed : 38.8 kB/s | 20:05 |
| KingOfOOP | Is that regular ? | 20:05 |
| TJ- | netzapper: did you try with pavucontrol to see if it can see the input? | 20:05 |
| netzapper | TJ-: that's literally the problem I stated... it does not show up in any of the GUI-based PA control software, and I also don't even see it in `pactl list`, although I admit I could have missed it. | 20:06 |
| omber | Hey there! Maybe I am overthinking this: I have my xubuntu box booting from 2x 500GB raid 1 md, /, /boot and swap are on it. How would I migrate this to single drive without raid (Im moving to an SSD). | 20:07 |
| TJ- | netzapper: sorry, I misread. does it show up with "aplay -L" (UPPER-CASE L) ? | 20:07 |
| netzapper | TJ-: yes, ALSA shows it... I can even mix it back into the output using alsamixer. It's live, pulseaudio just doesn't show it. | 20:10 |
| TJ- | omber: add the SSD as a 3rd (spare) device to the array. Fail 1 of the HDDs. Activate the hot-spare SSD and wait for it to finish syncing. "grub-install /dev/${SDD}" (that puts MBR/BIOS Boot + core.img on it), ensure all references to file-systems are using UUIDs not /device/mapper/ names, shutdown. remove HDDs. Test-boot with SSD only. | 20:10 |
| orq | hi | 20:11 |
| TJ- | netzapper: hmmm; if pactl isn't seeing it that suggests some kind of problem between ALSA and PA | 20:11 |
| === intel is now known as Guest37237 | ||
| netzapper | TJ-: ahh, actually, it *is* listed in `pactl`, but not in the GUI tools. | 20:12 |
| omber | TJ-: makes sense, someone else suggested something along those lines thank you | 20:12 |
| TJ- | omber: alternatively: Ensure UUID references as before, then fail 1 disk in the ARRAY. 'dd' the failed disk to the SSD. Shutdown, test boot as before | 20:13 |
| TJ- | omber: it does rather rely on the SSD being either exactly the same size, or larger than, the HDD being cloned | 20:13 |
| TJ- | omber: it's important the HDDs are removed at boot-time for the test, else the UUIDs will all clash and you'll end up in a mess | 20:14 |
| === Thanks_Ian is now known as December | ||
| netzapper | ah-HA! | 20:14 |
| TJ- | omber: removed==unplugged | 20:14 |
| TJ- | netzapper: Eureka? | 20:14 |
| netzapper | apparently, I needed to change the profile for the soundcard to Stereo Duplex | 20:14 |
| netzapper | TJ-: thanks for playing rubber duckie! | 20:15 |
| TJ- | netzapper: right, that sounds like it'd do it. I had forgetten they are called 'profiles' but I've been there with external sound devices | 20:15 |
| omber | TJ-: ok that will not work then as destination SSD is way smaller than current drives (I am not using the space, this was originally a home server turned into Nix workstation) | 20:15 |
| TJ- | omber: OK, tell me some more info then. The RAID mirror, is it a single partition or the entire phyiscal device | 20:16 |
| Phreya | Hey guys :) | 20:17 |
| omber | TJ-: raid mirror is across partitions on two physical devices, I have two mirrored partitions, md129 is my / and md128 is /boot, there is also a swap partition on each sd* | 20:18 |
| omber | TJ-: it seems to me what I should do is clonezilla /boot and / from the md device to ssd directly | 20:19 |
| omber | TJ-: http://pastebin.com/WzTeS7M2 this is what fdisk of each physical disk looks like | 20:21 |
| omber | TJ-: fstab references UUIDs not device names | 20:21 |
| MelRay | Hi everyone I just installed x11vnc but it is refusing the connection from my mac...I also tried to ssh from terminal on mac to linux...my client is not attempting to use ssh however...I presume I need to allow access to port 5900...how do I do this? | 20:25 |
| vegii | I has a problem. I pressed some key-shortcut that triggered the cursor that replaces the character right to it | 20:27 |
| vegii | I surely did it with my right hand. while typing | 20:27 |
| TJ- | omber: you've got mirrored partitions, so you should be able to do what I suggested, but with individual partition mirrors. You obviously will need to ensure the root file-system partition and others will fit on the target SSD. If not, you might want to shrink the file-system(s) somewhat first, and then clone them | 20:28 |
| TJ- | MelRay: 'openssh-server' is required to receive SSH connections | 20:29 |
| omber | TJ-: makes sense, let me take on that :) | 20:29 |
| ioria | MelRay, have you tried this http://www.kombitz.com/2012/08/14/how-to-access-x11vnc-from-a-mac/ ? | 20:29 |
| MelRay | TJ: Yes I know that...I'm first attempting the connection without ssh | 20:29 |
| TJ- | vegii: sounds like you pressed the right-Alt key | 20:29 |
| DalekSec | TJ-: Or dropbear. ;) | 20:29 |
| TJ- | DalekSec: I don't think dropbear configures a per-user SSH config does it? | 20:30 |
| MelRay | ioria: Will look thank you... | 20:31 |
| vegii | TJ-, pressing it again doesnt help. How to trigger this cursor? | 20:31 |
| TJ- | MelRay: ahh, well, it always helps to have a reliable remote connection first, and build on it :) | 20:31 |
| MelRay | TJ: My thought as well...do it easy first then focus on the *right* way to do it | 20:32 |
| BluesKaj | TJ-: after cloning I ran the check option in gparted on the target partitions, think it formats any unused portion of the partition ...works anyway | 20:32 |
| TJ- | vegii: I may be referring to something different. The right-Alt key is often used to trigger multi-key characters | 20:32 |
| DalekSec | TJ-: Hmmm. Might not, though wouldn't surprise me as it is the second most featureful Linux ssh server I know of, next to openssh. | 20:33 |
| TJ- | MelRay: on Linux ensure the basics; the vnc service is listening on a port, there are no firewall rules blocking it | 20:33 |
| vegii | TJ-, [SOLVED] it was the "insert" key | 20:33 |
| TJ- | vegii: aha! well done :) | 20:33 |
| MelRay | TJ: That was why I was asking about the firewall...I have checked and do see x11vnc listening on port 5900:0 | 20:34 |
| ioria | MelRay, right... i have to temporary disable it with vino | 20:35 |
| MelRay | ioria: Problem is right now I don't have openssh setup....and the tutorial shows how to use ssh to connect then allow permission to connect...is there a gui I can install in xubuntu to let me set the rules? | 20:36 |
| MelRay | BTW I just tried to install openssh and apt didn't find it... | 20:37 |
| ioria | !info openssh-server | 20:37 |
| ubottu | openssh-server (source: openssh): secure shell (SSH) server, for secure access from remote machines. In component main, is optional. Version 1:6.9p1-2 (wily), package size 382 kB, installed size 1092 kB | 20:37 |
| MelRay | Nevermind....fat fingers goofed it up | 20:37 |
| ioria | MelRay, sudo ufw enable/disable7status | 20:37 |
| ioria | MelRay, sudo ufw enable/disable/status | 20:38 |
| MelRay | ioria: Thanks....learning a lot all..thanks so much for your time | 20:39 |
| ioria | MelRay, np | 20:39 |
| === step21_ is now known as step21 | ||
| MelRay | Ok next newbie question...I have openssh installed and tried to connect from mac terminal...it worked but does not accept the password for the user? | 20:50 |
| ioria | MelRay, are you entering the ubuntu username or the mac username ? | 20:51 |
| MelRay | ioria: I'm using the password for the linux account | 20:52 |
| MelRay | Should it be for the user pass on my mac? | 20:52 |
| ioria | no | 20:52 |
| Meggaiver | ciao | 20:53 |
| Meggaiver | !list | 20:53 |
| ubottu | Meggaiver: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ». | 20:53 |
| ioria | MelRay, try ssh ubuntu_username@ubuntu-ip | 20:53 |
| MelRay | ioria: Ok lemme try that... | 20:53 |
| MelRay | ioria: Yeah...success | 20:54 |
| MelRay | clear | 20:54 |
| ioria | forwarding issue then ... | 20:54 |
| Meggaiver | !list | 20:55 |
| Meggaiver | http://community.ubuntu.com/contribute | 20:55 |
| Meggaiver | http://community.ubuntu.com/contribute | 20:55 |
| ioria | MelRay, grep Forwarding /etc/ssh/sshd_config | 20:56 |
| Meggaiver | http://partners.ubuntu.com/ | 20:57 |
| MelRay | ioria: It is set to yes...I have now connected using the vnc client from mac...but I still only see command line and not graphics display...where do I look for settings to enable this? | 20:58 |
| ioria | MelRay, idk mac ... which vnc viewer ? | 20:59 |
| MelRay | ioria: Sorry I got it figured out...I searched the mac app store and it installed a ssh client similar to putty...I'm downloading chicken of the vnc for mac from sourceforge right now | 21:00 |
| ioria | MelRay, ok, keep in mind that maybe you 'll need to disable ufw on ubuntu : sudo ufw disable | 21:01 |
| billxtn | i have a second hard drive that have so many bad sectors can i mark them all and not use them so i can use that hard drive ? | 21:02 |
| MelRay | ioria: Nope..thank you thank you thank you...I'm typing to you via vnc remote to Xchat with you... | 21:02 |
| MelRay | Too frickin' awesome... | 21:03 |
| cfoch | Hi. I have Ubuntu 15.04. How can I get the last version of arcanist? | 21:08 |
| Bashing-om | !info arcanist vivid | 21:12 |
| ubottu | arcanist (source: phabricator): Command line interface for Phabricator (review platform). In component universe, is optional. Version 0~git20150211-1 (vivid), package size 382 kB, installed size 2214 kB | 21:12 |
| cfoch | Bashing-om? | 21:16 |
| billxtn | how can i detect and fix bad blocks of a hard drive in ubuntu sever? | 21:16 |
| Bashing-om | cfoch: Yes ? you pinged . | 21:16 |
| cfoch | I want to install the version of arcanist that is on Ubuntu 15.10 | 21:17 |
| cfoch | how do I do that? | 21:17 |
| Bashing-om | cfoch: Not a proponet of going out of release. At some point you will break your system - you good at fixing ? There maybe a PPA or maybe enable backports ? No direct experience with arcanist so can not directly advise . | 21:19 |
| Bashing-om | !ppa | 21:20 |
| ubottu | A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge | 21:20 |
| === wan is now known as Guest10431 | ||
| === step21 is now known as step21_ | ||
| SuperLag | TJ-: so if I pin cuda, then I have to pin everything it brings with it, too? | 21:24 |
| TJ- | cfoch: the version in 15.10 has an absolute depends on a specific, recent, version of libphutil which is only in 15.10, too | 21:24 |
| Z3 | Hi! It's possible to install MIR on Ubuntu 14.04 for watching movies and play games? | 21:28 |
| k1l_ | Z3: no | 21:28 |
| Guest92932 | what's a good app to check if your hdd is defective? | 21:29 |
| TJ- | SuperLag: everything you don't want updating, yes | 21:29 |
| Z3 | k1l_ ok, thank you | 21:29 |
| aphorise | Does anyone know if LiveCD's come with UEFI enabled? | 21:32 |
| aphorise | Not the install images but the live images. | 21:32 |
| Phreya | Guest92932: Have you tried smartctl? | 21:33 |
| Guest92932 | nope | 21:34 |
| k1l_ | aphorise: live and isntall are the same iso | 21:34 |
| Phreya | You could try that. // sudo smartctl -t long /dev/sda | 21:34 |
| TJ- | aphorise: Yes; they're hybrid boot ISO/El Torito/MBR/UEFI | 21:35 |
| orq | hi | 21:36 |
| liahim1 | hello, I have a problem with libreoffice when trying to open it only the splash screen appears and nothing else happens. any ideas? | 21:37 |
| liahim1 | using ubuntu 14.04 | 21:38 |
| aphorise | TJ- these are the livecd's right? - not the install cd's? | 21:42 |
| boo7 | hi, Q: do i install python by downloading it from the official site\softweresenter\shell command? | 21:43 |
| k1l_ | aphorise: there is only a live and install cd. its the same. | 21:44 |
| aphorise | k1l_ sorry my bad confussion... thanks | 21:44 |
| lubuntu | et | 21:45 |
| k1l_ | aphorise: you get to choose when the cd is bootet: install or try. (but with try out you can still install from there) | 21:45 |
| Jamie_1 | hey for some odd reason i got an error transferring one of my vdi to a flash drive, at first it was going fast then slowed down, then gave me the error of "file to large" | 21:48 |
| Bashing-om | Jamie_1: File > 4G, and fat16 filesystem ? | 21:48 |
| Jamie_1 | Bashing-om: its a 64gb and one sec let me check the partition type | 21:49 |
| Jamie_1 | Bashing-om: fat32 | 21:50 |
| Bashing-om | Jamie_1: 4 gigs is all that file system will handle. See : http://support.microsoft.com/kb/314463 . | 21:51 |
| Jamie_1 | thanks Bashing-om... thats annoying | 21:52 |
| aphorise | Is there a safe / legacy graphics mode in latest images? - I'm trying 15x from disc - but its freezing on the initial X windows with black | 21:52 |
| Bashing-om | Jamie_1: That filesystem was authored when 4 gigs was huge ! | 21:53 |
| Jamie_1 | i remember that lol.... back when i used to have halo on a thumb drive | 21:53 |
| Jamie_1 | Bashing-om: what format should i change it to? | 21:54 |
| Bashing-om | Jamie_1: Depends on "your" use case . All my work is in linux in one shape fashion form or another - and I use ext4 for most everything . cross platform is NTFS . | 21:56 |
| Jamie_1 | its for a vdi file and for another linux machine and also i need it to be accessable to mac | 21:57 |
| Aaaaand | Hey, I have troubles with my apple magic mouse, natural scrolling does not work on it, also when you scroll it immediately stops when you stop touching the mouse, it doesn't slowly lose momentum like it normally does | 21:59 |
| Aaaaand | any idea how I can solve this? | 21:59 |
| ubuntu-mate | [2 p | 21:59 |
| ubuntu-mate | 1 ';'llo1o 1 | 21:59 |
| ubuntu-mate | 2 [1 n | 21:59 |
| ubuntu-mate | [p3[n p[[o | 21:59 |
| === ipodpence is now known as pence_rc | ||
| ubuntu-mate | hi | 22:04 |
| E1ephant | silly question time, I have a 14.04 install, and my security analyst is saying scans are erroring out with several CVEs, having no updates in ubuntu, I am pretty confident these are backported in my php/apache2 ubuntu packages | 22:05 |
| E1ephant | that said, I don't see these CVEs in the ubuntu CVE tracker, looking for a quick way "to be sure" | 22:05 |
| Brian- | yo ops Drone` yw2014 is sending very long PMs about religion - any change you can kick ban him ? | 22:06 |
| E1ephant | is changelog for each package/revision the answer? | 22:06 |
| ryan_ | hello | 22:06 |
| Guest20974 | hi | 22:07 |
| Jamie_1 | Bashing-om: i changed it to ext4 but its still doing the start well then slow down to slow as hell... its down to 14mb/s | 22:08 |
| rww | Brian-: islam, I assume? | 22:08 |
| Brian- | rww indeed | 22:08 |
| HackerII | doh | 22:09 |
| * rww sighs | 22:09 | |
| Pyrrha_ | Bonjour :) | 22:09 |
| Brian- | wtg rww :) | 22:09 |
| Brian- | I haven't seen that on freenode before . | 22:10 |
| rww | Brian-: it's been a thing recently :( | 22:10 |
| Bashing-om | Jamie_1: Do not know .. bufferring ? still writing to disk ? ( does it complete ) ? | 22:10 |
| Jamie_1 | im waiting to find out... its roughly 7gb | 22:10 |
| Exagone313 | Brian-: you can disallow unregistered users to send you queries | 22:10 |
| Exagone313 | I did that because of annoying queries | 22:11 |
| Brian- | ok Exagone313 - thanks for the tip :) | 22:11 |
| Jamie_1 | Bashing-om: if it fails again ill just do it via torrent transfer | 22:11 |
| Exagone313 | it is with user mode +R | 22:11 |
| Bashing-om | Jamie_1: Lot's I do not know, IF it fails I would be interested in learning the reason why . | 22:12 |
| gustav___ | Is there any way to store data secondarily on my local SSD and "swap" out unused data to a network drive or NFS mount? | 22:13 |
| bgardner | Exagone313: Thanks for the tip | 22:13 |
| Jamie_1 | Bashing-om: im interested to find out why its slowing down so far... nothing else is using the usb transfer daemon | 22:13 |
| Jamie_1 | Bashing-om: it finished | 22:16 |
| Bashing-om | Jamie_1: Great ! All I can think of is the buffereing, How did you copy the file 'cp', 'rsync' ? | 22:17 |
| Jamie_1 | Bashing-om: via nautilus | 22:17 |
| Jamie_1 | Bashing-om: its starts out at roughly 90mbs | 22:17 |
| Bashing-om | Jamie_1: I do not do GUI .. presetly out of my experience range . | 22:18 |
| Jamie_1 | Bashing-om: all good, was kinda odd... i used gparted to reformat and then it had it down as owned by root... so i had to chown it | 22:18 |
| Bashing-om | Jamie_1: "root' is a standard .. and then is SOP to change to the desired ownerhip :) | 22:20 |
| Jamie_1 | never really ran into that with removable media | 22:20 |
| shellhelp | Hi folks | 22:30 |
| shellhelp | I need help with a shell script | 22:31 |
| bert_ | helo | 22:31 |
| bazhang | #bash shellhelp | 22:31 |
| Exagone313 | shellhelp: maybe #bhash | 22:31 |
| Exagone313 | bash | 22:31 |
| shellhelp | kk | 22:31 |
| shellhelp | thank you | 22:31 |
| bert_ | hello | 22:32 |
| Prevaky | Hey, in which section of ubuntuforums.org should I ask about ftp related stuff? | 22:32 |
| === sUbMuNdO is now known as Guest32376 | ||
| Bashing-om | Prevaky: " Networking & Wireless" would be apt .. if required the mods can move the posting . | 22:38 |
| Prevaky | all right Bashing-om, thanks | 22:39 |
| |-Esc-| | l | 22:47 |
| brx0 | hi. Just a short question. I configured an Wlan-AP with KDE5-nm-editor. How can you disable WPS? is there a config somewhere? I didn't find a wpa-supplicant.conf. Thank you | 22:49 |
| brx0 | Ubuntu 15.10 | 22:49 |
| Tomahawk | 4.2.0-22-generic #27-ubuntu SMP Thu Dec 17 22:57:08 UTC 2015 x86_64 x86_64 x86_64 GNU/LINUX (new install faster on battery than on ac, and drm failure on pipeA | 22:53 |
| Koyaanis | i didnt know 16.04 is out | 22:57 |
| Koyaanis | tzzz | 22:57 |
| Bashing-om | Koyaanis: Not, the beta is available for testing, will not be releasd 'til April of 2016 . | 22:58 |
| k1l_ | Koyaanis: its not out | 23:00 |
| SergioEDuran1 | friends... I am having issues with some games and emulators and my PC | 23:00 |
| SergioEDuran1 | after trying to exit from them my PC crashes somebody know why? | 23:00 |
| SergioEDuran1 | my GPU is an Intel one | 23:00 |
| SergioEDuran1 | PC model: Dell inspiron 1420 | 23:00 |
| antoine[marechal | hi | 23:03 |
| Tomahawk | 4.2.0-22-generic #27-ubuntu SMP Thu Dec 17 22:57:08 UTC 2015 x86_64 x86_64 x86_64 GNU/LINUX (new install faster on battery than on ac, and drm failure on pipeA | 23:03 |
| antoine[marechal | I got a question: how could I have my monitor working in a wireless ? | 23:03 |
| antoine[marechal | bluetooth did the thing for audio, but video ? | 23:04 |
| SergioEDuran1 | so? do you know how to solve this issue? | 23:05 |
| antoine[marechal | no, I wonder if there's a way | 23:05 |
| SergioEDuran1 | I see | 23:05 |
| antoine[marechal | like a bluetooth videocard or somethinq | 23:05 |
| antoine[marechal | had a search but it is either not there or I have the wronq keywords | 23:06 |
| k1l_ | antoine[marechal: there are some projects working on that. but not really ready | 23:06 |
| antoine[marechal | nice to hear that, what about wifi stuff ? Id like not to buy a new fancy tv for this but use the old one | 23:07 |
| SuperLag | If I have a script running that is using the python3 binary, is updating any of theses packages going to affect it? : python-apt-common python3-apt python3-problem-report python3-apport python-apt python-problem-report python-apport | 23:08 |
| Koyaanis | Bashing-om k1l_ whats the difference | 23:08 |
| Koyaanis | both look the same do the same | 23:08 |
| k1l_ | !16.04 | Koyaanis | 23:09 |
| ubottu | Koyaanis: Ubuntu 16.04 (Xenial Xerus) will be the 24th release of Ubuntu. Announcement at http://www.markshuttleworth.com/archives/1479 - Discussion in #ubuntu+1 | 23:09 |
| hzut | hi | 23:09 |
| Koyaanis | both look the same do the same | 23:09 |
| hzut | please help me | 23:09 |
| Bashing-om | Koyaanis: difference: testing/tested and released . | 23:09 |
| Koyaanis | released doesnt mean its not being tested anymore | 23:09 |
| Koyaanis | hueheu | 23:09 |
| k1l_ | Koyaanis: are you sure you understand the development and release cycles? | 23:10 |
| hzut | each clic on middle button copy twice instead of one! | 23:10 |
| k1l_ | !releases | Koyaanis | 23:10 |
| ubottu | Koyaanis: Ubuntu releases a new version every 6 months. Each version is supported for 9 months to 5 years. More info at https://wiki.ubuntu.com/Releases & http://wiki.ubuntu.com/TimeBasedReleases | 23:10 |
| Koyaanis | well if that bot says so, it must be true | 23:11 |
| * Koyaanis giggles incoherently | 23:11 | |
| Tomahawk | 4.2.0-22-generic #27-ubuntu SMP Thu Dec 17 22:57:08 UTC 2015 x86_64 x86_64 x86_64 GNU/LINUX (new install faster on battery than on ac, and drm failure on pipeA | 23:12 |
| mehmet | hi | 23:13 |
| OerHeks | Tomahawk, if this happened to you: write a bugreport then,no use of repeating here like that | 23:13 |
| mehmet | fuck you idiots | 23:14 |
| Tomahawk | sorry the guidelines said to wait 5 to 10 minutes before reposting | 23:15 |
| hzut | i installed ubuntu on my mac - what is the best thing to do with keyboard and trackpad? | 23:16 |
| brx0 | hi. Just a short question. I configured an Wlan-AP with KDE5-nm-connection-editor. How can you disable WPS? is there a config somewhere? I couldn't find a wpa-supplicant.conf. Ubuntu 15.10. Any idea? Thank you | 23:18 |
| brx0 | hzut: Bluetooth? | 23:18 |
| wanglin | good morning | 23:30 |
| MelRay | Anyone have any suggestions for a good IDE to use for learning python? | 23:45 |
| jvtbatman | I recently tried installing Ubuntu Core to a SD-card on Ubuntu and when I connect it to the computer now it isn't detected. Any suggestions? | 23:49 |
| jvtbatman | It doesn't show up in neither GParted or fdisk | 23:53 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!
