[11:07] <Razva> should I use 14.04 or 14.10?
[11:09] <hateball> Razva: 14.10 is EOL
[11:10] <hateball> 14.04 or 15.10 are supported for now
[11:31] <Razva> got it
[11:36] <yeats> Razva: use LTS for servers (assuming you want to sleep at night ;-))
[11:48] <Razva> yeats sleep is so overrated nowadays! :))
[11:51] <Razva> omg the old MAAS version is SO ugly :|
[12:56] <coreycb> ddellav, we can just set the MIR as invalid and mention what we're doing instead
[13:02] <Razva> any idea if MAAS + Autopilot will create a NAT for the LAN nic?
[13:02] <Razva> or should I manually create it?
[13:03] <leitao> is there a place I can read about ZFS licensing issue on Ubuntu?
[13:04] <rbasak> leitao: http://blog.dustinkirkland.com/2016/02/zfs-licensing-and-linux.html
[13:04] <leitao> rbasak, thank you!
[13:13] <caribou> smoser: I think I identified the squid-deb-proxy bug that you opened for Xenial
[13:13] <caribou> smoser: but I'd like to check with mvo before introducing a delta
[13:25] <Razva> any idea if MAAS + Autopilot will create a NAT for the LAN nic, or should I manually create it?
[13:50] <coreycb> zul, can you upload this to xenial? https://code.launchpad.net/~corey.bryant/ubuntu/+source/python-congressclient/+git/python-congressclient/+ref/debian/mitaka
[13:50] <zul> *sigh*
[13:53] <zul> coreycb: this is a conspiracy to make me go over my cable internet limit right? ;)
[13:54] <coreycb> zul, it is, yes
[13:54] <zul> done
[13:54] <coreycb> zul, thanks
[14:38] <smoser> caribou, here now.
[14:39] <caribou> smoser: just wanted to let you know that I hit the same squid-deb-proxy bug you reported
[14:39] <caribou> smoser: We'll need to revert a debian patch that moves from squid3 -> squid in the last version
[14:39] <caribou> smoser: but I want to check with mvo first as there is no delta
[14:40] <caribou> LP: #1544719
[14:40] <smoser> so that comment in the changelog:
[14:40] <smoser> depend on squid3 instead of squid, thanks to
[14:40] <smoser> + HIGUCHI Daisuke (VDR dai), closes: #813082
[14:41] <smoser> ah. i think that might be right.  we just need to dependon squid3 instead of squid. is that what you're saying ?
[14:42] <rbasak> caribou: I'm preparing a squid3 merge, so everything may break when I land bug 1473691 anyway, FYI.
[14:43] <rbasak> I'll make a note to check squid-deb-proxy when I upload.
[14:43] <rbasak> In the new upload, squid will become the primary package, and squid3 a transitional package only.
[14:44] <rbasak> It's all a bit messy, hence the delay.
[14:44] <rbasak> But hopefully once it's all resolved everything can settle on squid and the transitional stuff can disappear in Xenial+1.
[14:45] <caribou> rbasak: the bug is caused by the fact that debian has changed squild3 to squid
[14:50] <rbasak> caribou: yes but we will follow as soon as I get this upload done.
[14:50] <rbasak> I'm just warning that fixing it now may not work if I break it by my subsequent upload
[14:51] <caribou> rbasak: sure, I'm not touching it for the moment
[14:53] <smoser> rbasak, good. please do mark that bug as fixed when you merge and upload.
[15:22] <rbasak> smoser: ack
[15:30] <ddellav> coreycb did you have a chance to look at that ceilometerclient test issue?
[15:30] <runelind_q> I built my own landscape server to manage my Ubuntu Virtual Machines, however when I register them they show up as full computer registrations instead of virtual machines.  Is there something special I have to do to register them as virtual machines?
[15:30] <coreycb> ddellav, no, I wasn't sure if I should clone the debian repo to reproduce or yours
[15:31] <ddellav> coreycb i was getting it when running tests on the upstream repo
[15:31] <coreycb> ddellav, ok I'll take a look
[15:53] <coreycb> ddellav, well py3 tests run ok from upstream but I'm hitting a separate issue for py2
[15:58] <coreycb> ddellav, py2 and py3 tests run ok on trusty
[15:59] <ddellav> hmm, im on xenial
[15:59] <ddellav> coreycb how did you run the tests?
[15:59] <coreycb> ddellav, tox
[15:59] <ddellav> i can create a trusty container on my bastion to run them and see
[16:00] <ddellav> but it fails on the xenial ppa
[16:00] <coreycb> ddellav, try your bastion
[16:02] <coreycb> ddellav, can you point me to the failure?
[16:02] <ddellav> coreycb https://launchpadlibrarian.net/240367223/buildlog_ubuntu-xenial-amd64.python-ceilometerclient_2.3.0-1~ubuntu16.04.1~ppa201602181049_BUILDING.txt.gz
[16:12] <coreycb> ddellav, the output sure looks similar in that assertEqual
[16:13] <ddellav> yep, and i think it's only the py34 version that fails so i was thinking it was an issue with six possibly
[16:14] <coreycb> ddellav, the columns are wider though.  to quickly fix it you can probably manually run an assertEqual test in a python shell and modify the expected results and if it's just column width issues, submit a patch upstream.
[16:18] <ddellav> coreycb ok, i'll take a look at that
[16:18] <coreycb> zul, can you add a bug subscriber for aodh
[16:19] <zul> i think i did
[16:19] <coreycb> zul, yes you did, thanks
[16:36] <damascene> I have this server with dns record set with a web interface. I would like to just change the dns server for one entry. how to do that?
[17:20] <beisner> coreycb, staging has newer neutron and numactl for icehouse
[17:21] <beisner> coreycb, also, we have icehouse proposed tested and ready for promotion monday.
[17:21] <beisner> coreycb, so, going to have to hold off on the flush of staging until after that.
[17:41] <coreycb> beisner, ok
[18:11] <runelind_q> are there any backports for openssh-server?
[18:11] <runelind_q> for 14.04
[18:12] <runelind_q> I guess client as well.
[19:19] <ddellav> coreycb you can look at congressclient now if you want. I added the repo to the spreadsheet
[20:17] <slicslak> I have a server using zfs. I was using the PPA for it, it's been setup for a number of years. Yesterday I upgraded to 16.04 and my zpool is no longer listed.
[20:18] <slicslak> The partitions are all listed correctly in /dev/disk/by-id but zpool import and zpool import -d /dev/disk/by-id result in nothing
[20:18] <sarnold> is there anything in dmesg? are the spl and zfs kernel modules loaded?
[20:23] <slicslak> yes, both are loaded
[20:24] <sarnold> does systemctl show any errors for the various zfs units?
[20:33] <slicslak> no errors. zfs-mount.service and zfs-share.service are both loaded active exited.
[20:34] <slicslak> I've never used systemctl before, but it also has all my disks listed. for example, one line is dev-disk-by\x2dpartlabel-zfs.device loaded    active   plugged   WDC_WD30EFRX-68A ocean
[20:35] <slicslak> ocean is the name of the zpool
[20:40] <sarnold> slicslak: and dmesg? syslog? could you pastebin your zpool status and zpool import -d /dev/disks/by-id/ output?
[20:45] <slicslak> zpool status is "no pools available". zpool import is literally nothing. no output.
[20:59] <sarnold> slicslak: yikes :/ sorry, I've got to run. try also in #zfsonlinux -- they won't have seen many xenial sysstems yet but they're a helpful bunch :)
[21:02] <slicslak> thx sarnold, appreciate it
[21:04] <jak2013> when i do a sudo "apt-get update" i get this error: "E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?"   how to fix?
[21:10] <bekks> jak2013: Some sources arent available, you just have to wait.
[21:15] <jak2013> cant modify the resources?
[21:18] <bekks> jak2013: Just use another mirror.
[21:22] <jak2013> how to configure apt-get?
[22:08] <rattking> Hello I am working with fai to install trusty, but I am finding that my grub-pc debconf settings get clobbered and the defaults are used. does any one know how to set grub2/linux_cmdline_default so it uses the settings I want?
[22:11] <rattking> if I purge grub-ps and set "echo "grub-pc grub2/linux_cmdline_default string consoleblank=0" | debconf-set-selections" then install grub-pc my selections get reset to just "nomdmonddf nomdmonisw"
[22:12] <rattking> this worked on precise
[22:30] <sarnold> slicslak: any luck?