[02:45] <ChibaPet> Volkodav1: I'm back, much later than intended, but I hope to get that Samba service up and running in a bit.
[02:45] <ChibaPet> I'll share my experience with it once I dive in.
[03:17] <Fudge> wb ChibaPet
[03:38] <ChibaPet> hey there
[03:39] <ChibaPet> I've been diverted. Doing a Xenial install on a friend's machine before I dive into my projects.
[03:39] <Fudge> how you going mate
[03:39] <ChibaPet> Not badly. :)
[03:39] <Fudge> working on a mates xenial trying to get usb sound to work
[03:39] <Fudge> found the usb card set to -2 in modrpobe.d alsa-base so it appears in alsamixer now
[03:40] <Fudge> but just need to set it as default card
[03:40] <ChibaPet> -2?
[03:40] <Fudge> without sound it is a show stopper for him
[03:41] <ChibaPet> I've only used USB sound once or twice, and it was fairly painless, but that was without Pulse in the way.
[03:43] <Fudge> yeah this is no pulse either, removed it
[03:49] <Fudge> ah asound.conf i need to edit next
[03:50] <Fudge> ah maybe i dont need to, should be playing
[03:51] <Fudge> what an effort
[03:56] <Fudge> yay
[04:24] <Fudge> one prob down two to go
[04:38] <Fudge> tried this tiem deleting the dhclient lease then asking for a new ip, it created/var/lib/dhcp/dhclient.eth0.leases
[04:38] <Fudge> hopefully it renews
[04:38] <Fudge> in 90 minutes we will see
[05:11] <Fudge> or before then actually my session lasted 20 minutes
[05:12] <Fudge> joy
[06:02] <ChibaPet> Alright, bedtime for me, but the install I did is fine.
[06:02] <ChibaPet> The box was previously on CentOS, and we could *not* get nVidia to work on it. We were stuck with Nouveau. Xenial, it just works, no muss, no fuss, no effort.
[06:03] <ChibaPet> Also no effort, MD-RAID1 boot, LVM on LUKS on MD-RAID1 root, ZFS on LUKS home.
[06:03] <ChibaPet> ZFS mirror, I should say.
[06:04] <ChibaPet> Tomorrow, Samba, another move to Xenial (this time from Debian Wheezy), and maybe some project time.
[06:08] <Fudge> ChibaPet:  done well
[06:08] <ChibaPet> Thanks. :)
[06:09] <ChibaPet> G'night.
[06:54] <Qwertie> Does anyone know how to enable mutiny on ubuntu mate 16.04?
[06:59] <lotuspsychje> Qwertie: i think i saw an article on softpedia for that
[07:01] <Qwertie> lotuspsychje, Got it. thanks
[07:06] <Qwertie> Hm I really like this. I might switch from unity if there is a way to make the program menu thing work like the one on unity
[07:09] <lotuspsychje> Qwertie: there is also the #ubuntu-mate channel if you like
[08:50] <mifritscher> moin
[08:51] <mifritscher> it seems that systemd logs into /dev/.bootchart/log until the ram is full?
[08:59] <lordievader> Good morning
[09:00] <Qwertie> When my laptop goes to sleep the backlight wont turn on after I wake it. Thats a problem with the kernel right?
[09:00] <Qwertie> And if so how would I go about reporting it?
[09:01] <lordievader> Qwertie: I'd say: ubuntu-bug linux-image-generic
[09:02] <Qwertie> Do you think its the kernel or something else?
[09:03] <lordievader> I'm not sure. But I do think the kernel is responsible for turning off the backlight. If it does turn out to be in the wrong category I'm sure it will gets moved to the proper category.
[09:03] <Qwertie> ok, I will report that then
[10:31] <Fudge> boo
[11:26] <Jordan_U> ren0v0: What link were you using for the daily image?
[11:27] <ren0v0> Jordan_U, its not right
[11:27] <ren0v0> its MATE...
[11:27] <lotuspsychje> ren0v0: wich link?
[11:27] <ren0v0> i have no idea what is going on, its like MATE is going to be standard
[11:28] <ren0v0> lotuspsychje, can't be 100% but think you gave me >  http://cdimage.ubuntu.com/daily-live/current/
[11:28] <ren0v0> i installed 15.10 in the end, it wouldn't let me install using LVM/FD
[11:28] <ren0v0> FDE*
[11:28] <lotuspsychje> ren0v0: that link is the daily image for xenial, so?
[11:28] <ren0v0> http://cdimage.ubuntu.com/daily-live/current/xenial-desktop-amd64.iso
[11:28] <ren0v0> lotuspsychje, yes, but its MATE...
[11:29] <ren0v0> we had this conversation didn't we, about why there was no standard release images
[11:29] <lotuspsychje> ren0v0: i dont recall, or see you in logs right away
[11:30] <ren0v0> lotuspsychje, i don't have enough buffer here to check either
[11:30] <ren0v0> it was yesterday though
[11:30] <lotuspsychje> ren0v0: but this link right here, should not be mate, there is seperate mate daily link
[11:30] <ren0v0> i have old OS still on another drive in this box actually, let me mount it
[11:31] <lotuspsychje> ren0v0: http://irclogs.ubuntu.com/2016/02/27/%23ubuntu+1.html
[11:32] <lotuspsychje> ren0v0: so, now tell us what you really want?
[11:33] <ren0v0> huh, i'm not asking for anything here, Jordan_U asked me a question...
[11:33] <ren0v0> and lotuspsychje i used this link, and it was MATE
[11:33] <lotuspsychje> ren0v0: you 100% sure?
[11:33] <ren0v0> i'm just trying to get into my other drive to find the ISO
[11:34] <ren0v0> now i have another issue that i mounted encypted drive and can't find where its mounted :D
[11:34] <ren0v0> it was on my unity launcher, i decrypted it but not sure what /dev/mapper/<> it is :P
[11:38] <lotuspsychje> ren0v0: you sure you didnt grab the iso from here? http://cdimage.ubuntu.com/ubuntu-mate/daily-live/current/
[11:39] <ren0v0> lotuspsychje, i'll check in a sec
[11:39] <lotuspsychje> ren0v0: wich version have you installed now?
[11:40] <ren0v0> lotuspsychje, please wait, i have decrypted drive with same LVM VG and i think its having a moment
[11:40] <ren0v0> mount: unknown filesystem type 'LVM2_member'
[11:43] <lotuspsychje> ren0v0: if your not on 16.04 right now, please seek help in #ubuntu
[11:43] <lordievader> You can mount a pv ;)
[11:44] <ren0v0> lotuspsychje, wtf, i'm not seeking help...
[11:44] <ren0v0> someone asked me a question here
[11:44] <ren0v0> and lordievader ubuntu GUI messed things, i'm trying via CL now
[11:44] <lotuspsychje> ren0v0: can you please keep the wearing out here
[11:44] <lotuspsychje> swearing
[11:45] <ren0v0> lotuspsychje, sure, stop telling me i'm asking for help about the build then, when i've told you 2-3 times now that Jordan_U asked me for a link, i didn't start typing here until that
[11:45] <ren0v0> i'm only spending my time messing with this drive trying to find the ISO to help see if there is an issue or not with the links, i'll go back to what i was doing before then if its not appreciated.
[11:46] <lotuspsychje> ren0v0: i find it hard to believe iso's would be wrong
[11:52] <ren0v0> lordievader, you aren't in #ubuntu so want to ask you here :)  the problem with mew trying to mount my mapped decrypted drive is that the VG has the same name. How can i mount with LV UUID or something?
[11:54] <ren0v0> http://pastebin.com/pHjVK4fu
[11:54] <lordievader>  I'm sorry I don't understand. Are you using luks?
[11:54] <lordievader> Wow, how did the installer mess up that bad.
[11:54] <ren0v0> yea, i decrypted with "cryptsetup luksOpen <name>"
[11:55] <ren0v0> lordievader, no, what you are seeing here is my new SSD (the active 250gb one), and my old HDD (500gb)
[11:55] <ren0v0> i was just trying to mount my old drive to check the ISO
[11:55] <ren0v0> i think there is a problem because naming is exactly the same, as they are both setup by ubuntu
[11:56] <lordievader> You could change the vg-name, ubuntu-vg ain't a very constructive name anyways.
[11:56] <ren0v0> thats the wizard for you :)
[11:57] <ren0v0> lordievader, well, i don't want to mess up my new install, so i need to issue commands with something unique :D
[11:57] <lordievader> You can mount the dm's directly.
[11:57] <ren0v0> thats what i was asking, with what, the UUID or something ?
[11:58] <lordievader> The /dev/mapper entries are just symlinks to /dev/dm-*
[11:58] <ren0v0> thats all i can see that is unique
[11:58] <ren0v0> lordievader, don't have that folder, unless you mean /dev/<vg>
[11:59] <lordievader> You should have a dev/mapper folder... dev-mapper makes it for you.
[11:59] <ren0v0> yes i do
[12:00]  * lordievader is confused
[12:00] <ren0v0> are just symlinks to /dev/dm-*
[12:00] <lordievader> Does the /dev/mapper exist or not?
[12:00] <ren0v0> yes
[12:00] <ren0v0> you said /dev/dm-*
[12:01] <lordievader> Yes, those are the actual block devices.
[12:01] <lordievader> The stuff in /dev/mapper and /dev/<vg-name> are symlinks to those block devices.
[12:02] <ren0v0> sudo mount /dev/dm-4 /mnt/container/         >     mount: unknown filesystem type 'LVM2_member'
[12:02] <ren0v0> same outcome
[12:03] <lordievader> what about 'sudo mount -t ext4 /dev/dm-4 /mnt/container'?
[12:03] <ren0v0> mount: wrong fs type, bad option, bad superblock on /dev/mapper/olddrive
[12:04] <lordievader> Hmm, the dm is the correct one?
[12:04] <ren0v0> yea i did    ls -l /dev/mapper/olddrive
[12:04] <ren0v0> lrwxrwxrwx 1 root root 7 Feb 28 11:43 olddrive -> ../dm-4
[12:04] <lordievader> Is that the unencrypted luks device?
[12:04] <ren0v0> yup
[12:04] <lordievader> You run lvm on luks?
[12:05] <ren0v0> "lvdisplay" shows both the LVs for this drive and my live one, they have same naming because they were both made with ubuntu installer.
[12:05] <ren0v0> let me pastebin that output
[12:06] <lordievader> Please answer my question.
[12:06] <ren0v0> http://pastebin.com/qwLrvpFj
[12:06] <ren0v0> lordievader, in all honesty i don't know, this is created by ubuntu, so whatever that does.
[12:06] <lordievader> ren0v0: Please post the output of 'sudo pvs'.
[12:07] <ren0v0> http://pastebin.com/xsWsUMe0
[12:08] <lordievader> As I figured. The error is completely normal. Your dm-4 is a physical volume, not a logical volume.
[12:08] <ren0v0> so what did i do wrong in the process of decrypting/mounting ?
[12:09] <lordievader> Also, lvm probably disabled the secondary vg because it ain't unique.
[12:09] <lordievader> ren0v0: Nothing.
[12:09] <ren0v0> lordievader, yes i understand thats why the issue is probably there, so what do i do about that ?
[12:09] <lordievader> But since the vg's are not unique only one can be active at a time.
[12:09] <lordievader> ren0v0: Make the vg's unique ;)
[12:09] <ren0v0> lol, why does ubuntu use non-unique name grrr
[12:10] <ren0v0> lordievader, yes but vgrename needs a name, and they are both the same lol, so i'm worried :D
[12:10] <lordievader> Because Ubiquity is crap at anything a little bit complex ;)
[12:10] <ren0v0> wow this sucks
[12:10] <lordievader> Does that matter? Rename one vg, do the things you need. Rename the vg back.
[12:11] <lordievader> ren0v0: This is why you set up lvm manually.
[12:11] <ren0v0> lordievader, if you say there is little risk in rename then maybe thats cool, i just don't know enough without reading up, i think this drive can stay like this for a while, i was just trying to help establish something about the daily build ISO thats all, not worth the time for me right now
[12:11] <ren0v0> thanks for clearing it up though, now i know why, and it was why i thought
[12:12] <ren0v0> will look at changing name when i get free time :D
[12:12] <lordievader> Worst that can happen is that you need to chroot from a live-cd and rebuild the initrd.
[12:26] <BluesKaj> Howdy folks
[13:09] <Novice201y> Hello. How to install .deb in 16.04?
[13:17] <lordievader> Novice201y: Use dpkg, as allways. (Or if it is in the repo, apt(-get)).
[13:20] <Novice201y> lordievader: I ask in the name of GUI-user.
[13:20] <lordievader> Double clicking the deb doesn't open some gui?
[13:21] <Novice201y> lordievader: Double click opens file archiver.
[13:21] <lordievader> Hmm, I have no idea what the current standard gui utility for this is in Ubuntu.
[13:22] <Novice201y> lordievader: When I try to open with "Software installl" then I get "Sorry, this did not work".
[13:22] <flocculant> used to be it's ubuntu software center -perhaps the change to the gnome one isn't working
[13:23] <flocculant> I'd install gdebi and use that
[13:23] <Novice201y> flocculant: :/
[13:23] <flocculant> Novice201y: I don't know for sure - don't use ubuntu
[13:24] <flocculant> and xubuntu currently has both
[13:25] <Novice201y> I know that 16.04 is under development but it should be ready for community daily testing :/
[13:25] <flocculant> it is
[13:26] <flocculant> just because there's something wrong atm - doesn't make it unfit for testing
[13:27] <Novice201y> flocculant: It would be ready for community testing when there will be easy "one click" way to submit ticket for issue like this.
[17:54] <ubuser> hello folks
[17:54] <ubuser> is it ok to ask something about 16.04 here?
[17:58] <ubuser> well, ill give it a try...
[17:59] <ubuser> i have a headset (usb) logitech G330, sound works nice, but microphone  does not. it is detected in the control panel but there is no feedback on the orange bars
[17:59] <ubuser> any hint?
[18:32] <ubuser> anyone knows why the software app does not show up any apps aside from the ones already installed?
[21:07] <Fudge> its muted?
[21:41] <vincenzoml> Hi there, I am trying to figure out why my mmc card reader on HP pavillion tablet x2 is not working under linux but works under windows. In dmesg I see an "error -110" when inserting the sd card
[21:41] <vincenzoml> this is vital to install linux and without installing it's not easy to e.g. install other kernels
[21:41] <vincenzoml> I am using the live usb at the moment, of ubuntu 16.04 because of wifi firmware and touch screen
[21:51] <salamanderrake> hello, fresh install of ubuntu 16.04 and no vmlinuz linux kernel image file installed so I can't boot it.
[21:53] <clivejo> any packagers here?
[22:01] <Fudge> clivejo:  I package a little
[22:02] <clivejo> I have a package is confusing me
[22:03] <Fudge> spell out your problem someone may be able to help if i cant
[22:09] <Fudge>  clivejo ?
[22:09] <clivejo> Fudge: https://launchpadlibrarian.net/243381192/buildlog_ubuntu-xenial-amd64.akonadi_4%3A15.12.1+git20160227.1356+16.04-0_BUILDING.txt.gz
[22:10] <clivejo> dpkg-shlibdeps: error: couldn't find library libKF5AkonadiXml.so.5 needed by debian/akonadi-server/usr/bin/akonadi_knut_resource (ELF format: 'elf64-x86-64'; RPATH: '')
[22:14] <Fudge> that link gives me 404 mate
[22:14] <Fudge> but its clear from the url that you have build dependencies
[22:14] <clivejo> the link should be a build log
[22:15] <Fudge> yeah I know but i get a 404 sorry
[22:15] <squinty> works here
[22:15] <clivejo> all build deps are fulfilled
[22:16] <Fudge> squinty:  oh ok ill try again
[22:17] <Fudge> ah got it now, that was weird
[22:23] <asper> hi there. i set systemd-networkd up on 16.04. and disabled networking.service. when i have an entry in /etc/network/interfaces for an interface with dhcp enabled, dhclient is started for that interface during boot. which unit spawns this?
[22:25] <Fudge> asper:  what spawns?
[22:25] <asper> the dhclient
[22:25] <squinty> clivejo,  http://packages.ubuntu.com/search?searchon=contents&keywords=libKF5AkonadiXml.so.5&mode=exactfilename&suite=xenial&arch=any   did a quick search of your build file but no reference to this lib indicated
[22:26] <Fudge> clivejo:  i wonder if this helps you http://stackoverflow.com/questions/23952821/how-to-load-private-shared-libraries-within-rules-make-file-in-deb-packaging
[22:27] <clivejo> should I be installing the lib in the server install file?
[22:27] <Fudge> asper:  that is what dhcp is, it launches dhclient and asks for an ip address for the gateway dhcp server
[22:27] <Fudge> do i misunderstnad you?
[22:33] <asper> yes. when setting an interface under systemd-networkd control dhcp should be handled by systemd-networkd. i thought the networking.service would read /etc/network/interfaces use ifup to bring them up and start dhclient if it says it should. but since i disabled networking.service i don't know which unit reads /etc/network/interfaces and starts dhclient.
[22:47] <Fudge> the interfaces file will request dhclient to run when it is sourced, i.e when the interface goes up as far as i understand