=== masACC is now known as maswan
=== King is now known as king
=== king is now known as King
[05:44] <elh9> hello
[05:45] <elh9>  i just enabled VT-d on my motherboard, (was only enabled on cpu before), and ubuntu server won't boot - has trouble identifying the ata devices that are mounted during boot, when i disabled it, ubuntu starts normally, anyone familair with this?
[05:45] <elh9> ata qc timeout
[05:45] <elh9> and failed to IDENTIFY (I/O error, err_mask=0x4)
=== pepper_ is now known as p3pp3r
[06:17] <elh9> https://bugzilla.kernel.org/show_bug.cgi?id=42679
[06:17] <ubottu> bugzilla.kernel.org bug 42679 in Serial ATA "DMA Read on Marvell 88SE9128 fails when Intel's IOMMU is on" [Normal,New]
[06:17] <elh9> apparently i can't use the marvel 9128 controller aswell as vt-d at the same time
[06:17] <elh9> they are not friends
[09:25] <lordievader> Good morning.
=== pelle2_ is now known as pelle2
[14:02] <bananapie> Linux says one of my ethernet cards is currently down, despite it being physically connected. I unloaded and reloaded the driver and rebooted the server. Ran ifconfig em2 up. It still says it's down. ( "UP BROADCAST MULTICAST" but no "RUNNING" or "SLAVE" keywords ). What commands can I use to eliminate software issues?
[14:06] <bananapie> dmesg : IPv6: ADDRCONF(NETDEV_UP): em2: link is not ready
[14:07] <bananapie> driver: bnx2
[14:07] <bananapie> version: 2.2.4
[14:07] <bananapie> firmware-version: bc 5.2.2 NCSI 2.0.6
[14:13] <madivad> Hey guys, I
[14:14] <madivad> I've installed ubuntu server +1 :) several times on a machine and it comes up habitually with a screen at the end of first boot that initially looks like a hanged screen
[14:14] <madivad> it displays:
[14:15] <madivad>   /dev/sda1: recovering journal
[14:15] <madivad>  /dev/sda1 clean, xx/xxxx files, xxx/xxxxx blocks
[14:15] <madivad> it took several reinstalls (and several usb keys and drives) for me to realise that it can't be the hdd (and in this case right now, a brand new ssd)
[14:15] <madivad> 1) I'
[14:16] <madivad> 1) I've worked out it's tty7 and I can tty1 to login and carry on (the screen I'm on gives no indication it's a tty and for all intensive purposes looks hung)... should there be some indicator for idiots like me? lol
[14:17] <madivad> 2) is it something to be concerned about?
[14:17] <madivad> it IS 16.04 server (no gui) and I don't believe it's drive (brand new ssd) or ram (extensively tested 20gb ecc ram) related
[14:18] <madivad> don't know where to look. cursory search of dmesg looks good
[14:18] <madivad> #ubuntu+1 suggested asking you guys since it's a server install
[14:33] <jayjo> what is the program that allows me to give an ssh alias and identify my pemfile so I can just type ssh <host> to connect?
[14:36] <Deeps> your ~/.ssh/config file?
[14:38] <jayjo> Deeps: I'm ashamed
[18:24] <Net-Centric> Is it normally this quiet in here ?
[18:36] <Net-Centric> Looking for some advice on mdadm - 14.04 server. Right place ?
=== Deliants is now known as Deliant
=== Deliants is now known as Deliant