[00:46] Canonical Releases LXD 2.0 Next-Generation Container Hypervisor for Ubuntu 16.04. So is this better/replacing qemu-kvm? [00:51] Hi === cyphase_ is now known as Guest30274 [02:11] When 16.04 is released, does anyonoe have an opinion of upgrading vs. fresh install? any experience upgrading? [02:20] ryehal what version of ubuntu are you currently running? === Hal_ is now known as RyeHal [02:24] Madhumber69: I currently use 14.04 [02:55] Does anyone know how to install Spotify on 16.04 successfully? I'm having problems [03:02] virtuosoj, fwiw, decide to check out spotify install ( even though i don't use it) and following the directions at https://www.spotify.com/ca-en/download/linux/ it installed without any problems. [03:06] virtuosoj, seems it's also available via 16.04 repo's spotify-client-0.9.17 [03:08] virtuosoj, anyways off to watch some tv with the wife..... hope you get your problems sorted out. :-) [04:39] what is the default window decoration program and theme lockations for kubuntu 16.04? [04:41] https://gist.github.com/beelsebob/c1a20a0ffcda69fa334021b26958cfc0 <- interesting bug [04:41] 0 packages eh? [05:36] anyone know what is the default window decoration program and theme lockations for kubuntu 16.04? [06:35] Mike1, how can I make TLP both work on plugged in and plugged off? [06:35] I think it only runs when plugged off.. [06:44] <[1_a]> nacc: i updated my kernel to 4.5.1 === vlado_ is now known as vbotka [08:13] Good morning. [08:49] I have troubles with Docker daemon in 16.04 beta: [08:49] "start: Rejected send message, 1 matched rules; type="method_call", sender=":1.178" (uid=1001 pid=11507 comm="start docker ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/upstart ")" [08:49] See https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1569763 [08:49] Launchpad bug 1569763 in upstart (Ubuntu) "Cannot connect to the Docker daemon. Is the docker daemon running on this host?" [Undecided,New] [08:49] I had to use the upstart startup alternative as the other one didn't work [08:50] Also ubuntu-bug is segfaulting... [09:08] pezet91: see daily iso url [09:08] in topic [09:08] thanks, i see ;) [09:08] pezet91: just keep in mind its still in development right now [09:09] !final | pezet91 [09:09] pezet91: If you install a development version of Ubuntu Xenial and keep up with package updates, then you will be upgraded to the official release of 16.04 when it comes out. To make sure, type « sudo apt update && sudo apt full-upgrade » in a terminal. [09:09] i know ;) [09:09] ok good luck [09:09] thanks === Bluefoxicy_ is now known as Bluefoxicy === funkyHat_ is now known as funkyHat === Exagone314 is now known as Exagone313 [09:56] <]Oscar> I'm trying to install 16.04 beta 2 on an SSD, but it crash with grub-uefi. It is impossible to close the error windows, so the crash report does not start, and there is no bash active... Can I help you with this in any way? [10:30] !uefi | ]Oscar [10:30] ]Oscar: UEFI is a specification that defines a software interface between an operating system and platform firmware. It is meant as a replacement for the BIOS. For information on how to set up and install Ubuntu and its derivatives on UEFI machines please read https://help.ubuntu.com/community/UEFI [10:49] hello, how to disable x server in ubuntu 16.04 on system start? === ghostcube_ is now known as ghostcube [10:55] Howdy all === uaa is now known as Guest95487 [12:07] hi. Why does systemctl now says 'Loaded: loaded (/etc/init.d/nginx; bad; vendor preset: enabled)' ? [12:07] it was 'Loaded: loaded (/etc/init.d/nginx)' in 15.10. [12:07] what does "bad" mean? === userarch2 is now known as eoli3n [13:37] question, anyone having issues with openconnect VPN not showing up under network manager? [13:38] install openconnect and network-manager-openconnect-gnome, but when creating vpn, I only see vpnc, and pptp, no openconnect === Guest95487 is now known as az [13:53] How can i connect remotely to my windows vps via RDP on Ubuntu? [13:55] justintv90, there is a client preinstalled called Remmina. [13:57] Thanks [13:59] hey quick question, is steam working yet on 16.04? [14:00] fjg: should be, if its not !bug [14:01] fjg: there is also #ubuntu-steam and #gamingonlinux if you like === lotuspsychje_ is now known as lotuspsychje [14:01] cool thanks! will try and report back [14:08] hm, steam not starting up after install finishes. [14:09] fjg: amd gpu? [14:10] if so you need to preload a i386 libstdc++ [14:10] and some things won't work anymore [14:11] the problem is amd doesn't support linux anymore with their driver [14:11] it *might* get fixed at some point, but thats probably in the many month time scale [14:12] but at least their new free in-kernel drivers work very well for the desktop [14:12] just not so great for games [14:13] the commandline to start steam on 16.04 is: LD_PRELOAD="/usr/lib/i386-linux-gnu/libstdc++.so.6" steam [14:14] and then you just ahve to test what still works and what doesn#t [14:14] that works, thanks! [14:16] ok, will explore a bit and take note of any bugs, thank you again [14:24] Any ideas about this one?: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1569763 [14:24] Launchpad bug 1569763 in upstart (Ubuntu) "Cannot start docker.io with upstart in 16.04 beta" [Undecided,New] [14:24] upstart is still used? [14:24] fwiw docker starts for me with an machine upgraded from 14.04 [14:25] service docker.io start [14:25] though probably the correct command is now systemctl [14:36] is disabling plymouth splash screen still the same as before? That is, editing the grub settings, and removing the "quiet splash" options in the grub cmdline linux default items? [14:37] teward: yeah txt booting should be "" instead ot "quiet splash" [14:37] and sudo update-grub before reboot === lotuspsychje_ is now known as lotuspsychje [14:40] lotuspsychje: thanks, wanted to make sure it was still the same [14:41] dpkg-reconfigure grub-pc allows one to do that with dialogs instead of editing text files [14:42] alkisg: nice trick [14:43] (and you don't need update-grub afterwards either) [14:59] alkisg: indeed, nice trick, but i'm old-school ;) [15:00] well, then updating grub also warns about user-modified configuration files, so it's an additional reason to learn new tricks :) [15:04] :P [15:04] alkisg: that must be new, because /etc/default/grub has never caused those errors when I update it [15:04] even with upgrades [15:06] teward: all configuration files give prompts when they are first changed by the user, then a new packaged version comes out [15:06] You may have been lucky to not get an updated version [15:06] It's not specific to grub, it's how conffiles in debian have worked for ages [15:08] alkisg: on my 850 pro ssd, i almost see nothing of plymouth anymore, so im not changing to txt boot anymore [15:35] another xenial bug i found https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1569970 [15:35] Launchpad bug 1569970 in nautilus (Ubuntu) "Nautilus does not start" [Undecided,New] [15:38] Hello [15:38] hi kallo82 [15:38] what can we do for you? [15:38] im a PHP Developer, is it safe to install 16.04 , install oracle java and apache2 and mysql ? [15:38] kallo82: 16.04 is still in developing, not ready for daily use until final [15:38] is there any risk factors up to this moment ? [15:39] kallo82: see what the topic says. [15:39] at 21 april, final releases [15:39] at final should i reinstall or only install updates ? [15:39] kallo82: updates. [15:39] !final | kallo82 [15:39] kallo82: If you install a development version of Ubuntu Xenial and keep up with package updates, then you will be upgraded to the official release of 16.04 when it comes out. To make sure, type « sudo apt update && sudo apt full-upgrade » in a terminal. === lotuspsychje_ is now known as lotuspsychje [15:40] Is it stable at this moment ? [15:41] kallo82: yes, but that doesnt mean nothing cant go wrong [15:41] lotuspsychje: see my comment on the bug [15:41] teward: lets c [15:41] lotuspsychje: E:UnableToReplicateInStockUbuntu [15:41] (from the latest daily and a fresh install dist-upgrade'd) [15:42] lotuspsychje: you've got a modified desktop entry though for nautilus autostart, with 'display=false', that's not the 'stock' entry that I see in my fresh install [15:42] as i said in the bug [15:42] hmm [15:42] otherwise, I get similar error outputs, but there's no 'fatal death' here [15:43] (and the only reason I figured you have a different .desktop is cause Apport added it, and indicated it was modified) [15:43] kallo82: if you want to be even more certain, I'd wait 3-6 months after final release. It's all a matter of how much risk of breakage you can tolerate. === Bluefoxicy_ is now known as Bluefoxicy [15:44] teward: NoDisplay=false change to true right? [15:44] SwedeMike: i think so , my laptop is for business use im not gona take the risk, whats the linux kernel version in this release ? [15:44] SwedeMike: is it v 4.2 ? [15:44] lotuspsychje: ah, i misread, but yes that's the only difference between you and the default install on the daily [15:45] kallo82: https://wiki.ubuntu.com/XenialXerus/ReleaseNotes === marius is now known as mariusko [15:46] teward: same error output [15:46] lotuspsychje: stupid question, but are you sure everything's up to date? [15:47] letys find out :p [15:47] because it seems like you are having an issue where the default installs aren't actually having issues [15:47] jtaylor: "docker.io: unrecognized service" [15:48] teward: updating.. [15:48] lotuspsychje: also, those 'errors' you see don't appear to be critical errors, they're the GTK warnings, etc. that I always see when executing 'nautilus' from the command line [15:48] (so nothing 'new' there) [15:48] hey guys i have an i5 ivybridge cpu with intel 4400 video card. i have to put xhci_hcd.quirks=262144 in kernel options to enable shutdown of my laptop properly, i think i might be configuring something wrong?? [15:48] mariusko: sorry just docker now, it used to be docker.io [15:49] teward: well i start from terminal, because gui icon doesnt start..so wanted to find out [15:49] Failed to start docker.service: Unknown unit: docker.service [15:49] lotuspsychje: you may wish to include that in your bug. [15:49] to state that you tried in CLI after trying to open it from the GUI [15:49] but, again, default doesn't break, so... [15:50] with systemctl. service docker restart gives "start: Rejected send message, 1 matched rules; type="method_call", sender=":1.127" (uid=1001 pid=16100 comm="start docker ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/upstart ")" [15:50] teward: lemme update and reboot first [15:50] I use upstart as boot option as the normal one stucks at "kubuntu" logo [15:50] mariusko: were you root user when you ran `service docker restart`? Did you use `sudo` with the command? [15:50] (I see that error when I run `service * restart` (where * is any service) and I am not using sudo) [15:51] laptop reboots instead of shutdown no idea? [15:51] sudo reboot [15:53] teward: nautilus back in action [15:53] lotuspsychje: always make sure you have everything updated before filing bugs [15:53] especially with the devel release [15:53] something may have been interfering, so either a reboot or an update or both fixed things :P [15:54] teward: ill mark it solved [15:54] lotuspsychje: I assume we can mark the bug as "Invalid, it actually works now." ? [15:54] ok [15:54] ok [15:54] if you comment that it was fixed after updating and rebooting, I'll 'Invalid' the bug [15:57] teward: invalid and solved :p [15:57] teward: sudo yes [15:58] Uhm, actually not, but when I am, then it gives "docker start/running, process 21133" but the process is not there [15:58] Hmm, did something change in the way Ubuntu deals with PAM? [15:59] $ sudo /usr/bin/docker daemon [15:59] FATA[0000] Error starting daemon: error initializing graphdriver: "/var/lib/docker" contains other graphdrivers: devicemapper; Please cleanup or explicitly choose storage driver (-s ) [15:59] What does that mean? [16:03] Solved by removing /var/lib/docker/devicemapper === shadeslayer_ is now known as shadeslayer [18:45] hi there, i try to upgrade to 16.04 for some tests with update-manager, but there is nothing to upgrade... [18:46] someone can help me ? [18:46] cli or gui? and what is your actual release? [18:47] with gui, and i'm on ubuntu gnome 15.10 [18:47] alt+f2, then "update-manager -d". the -d is for developer [18:47] already done [18:47] since its not done yet and you might break your system [18:47] and it says that i'm already up to date [18:48] k1l_, i'm ok with that [18:48] what is "lsb_release -d"? [18:48] Description: Ubuntu 15.10 [18:49] i have disable all PPA [18:49] hmm [18:49] change mirror to main server [18:49] "sudo do-release-upgrade -d" does it work? or bring errors in terminal? [18:49] update, upgrade & dist-upgrade [18:50] zoreol@kb-avalaptop:~$ sudo do-release-upgrade -d [18:50] Recherche d'une nouvelle version d'Ubuntu [18:50] Aucune nouvelle version trouvée [18:50] in french ;) [18:50] no new version found [18:50] no errors too :) [18:51] could be due to some ubuntu servers got hardware failure and they are replaced right now. it was changelogs.ubuntu.com which was needed for upgrades [18:52] k1l_, sad story :( [18:52] i'll wait then, thanks for your help [19:01] ZrL`: grep ^P /etc/update-manager/release-upgrades ==> what's the output of that? [19:02] alkisg, i'll try [19:02] Prompt=normal [19:03] Hrm, ok, if it was "Prompt=never", it would explain it [19:13] ZrL`,LTS only ? [19:24] hi all. i am trying to build qtcreator 3.6 on xenial. however i always get this error ¨Project ERROR: Unknown module(s) in QT: help". any idea what package i could be missing? [19:28] also. why isnt qtcreator 3.6 in xenial? :( [19:36] !latest | drhalan [19:36] drhalan: Packages in Ubuntu may not be the latest. Ubuntu aims for stability, so "latest" may not be a good idea. Post-release updates are only considered if they are fixes for security vulnerabilities, high impact bug fixes, or unintrusive bug fixes with substantial benefit. See also !backports, !sru, and !ppa. === Nach0z_ is now known as Nach0z === tlyu_ is now known as tlyu === strycore_ is now known as strycore === Elimin8r is now known as Elimin8er === Mike1_ is now known as Mike1 === dasjoe_ is now known as dasjoe === zequence_ is now known as zequence === \b is now known as benonsoftware === _stowa_ is now known as _stowa === ochosi_ is now known as ochosi [21:10] hi. did you people notice the amount of memory that mysql uses in xenial? [21:21] pepee: Are you referring to a certain situation in particular? (I'm currently testing w/ the mariadb.org 10.1.13 Wily packages; in a three-node galrea cluster, the first node consumes 158.8MB upon startup--not too bad) [21:23] have not looked at mysql v5.7 until now, though. [21:23] uebera||, right after being installed, it uses 500+ MB [21:24] this is mysql, though, not mariadb [21:25] "impressive". [21:30] pepee, have you had a look at https://dev.mysql.com/doc/refman/5.7/en/memory-use.html? ("ps and other system status programs may report that mysqld uses a lot of memory. This may be caused by thread stacks on different memory addresses. [...]") [21:32] oh, nice, I just broke the whole thing by trying to remove mysql/install mariadb [21:33] yes, this is a known problem (if you were using mysql 5.7), see Ubuntu launchpad. If you purge everything, it'll eventually work, though ;) [21:34] yeah, I noticed that the configs/dbs were still there. thanks for the suggestion [22:43] can I get the debian installer to use 4.4 kernel for a trusty install? I'm able to use newer kernels from here: http://mirrors.kernel.org/ubuntu/dists/trusty-updates/main/installer-amd64/current/images/ and I would assume that xenial-netboot would contain the 4.4 kernel but that doesn't seem to be the case? do I just have to wait until xenial is released or something? the xenial kernel package is already available from the trusty [22:47] stststs, this channel is for 16.04 support trusty is in #ubuntu === cyphase is now known as Guest34205 [23:22] hey guys, in 14.04 i could install nvidia and use nvidia-settings to make a xorg.conf file and make it work so i can have all configured, but in xential it does not work [23:22] is there any way i can do this?? [23:37] bah, he left :( [23:47] hi all. i've got SSSD+AD integration working on a headless install of 16.04 server. what's the right/best way to allow users (me & gf) to mount smb shares from my NAS, without giving full sudo to each user?