[00:11] <Haunt_House> thanks, de-facto it kinda works now
[00:11] <de-facto> nice congratz :)
[00:14] <milisman> how can handle a protocol in a file manager
[00:15] <milisman>  like smb://,it handles with smbclient
[00:15] <milisman> i want to handle toxfs:// with my toxclient daemon
[00:15] <wyoung> milisman: that is nautalus / gvfs I suspect
[00:15] <milisman> e.g toxfs://milisman/fileA
[00:15] <blissful> exit
[00:15] <wyoung> Some one correct me if I am wrong
[00:17] <milisman> with gvfs how?
[00:18] <milisman> i will write e.g toxfs://milisman/fileA and f.m will show file via toxfs client
[00:19] <blissful> I cannot get irssi to disable join/leave notices...
[00:20] <Rhorse> blissful: may want to try #irssi
[00:20] <blissful> although maybe I spoke too soon? /ignore -channels #ubuntu * JOINS PARTS QUITS NICKS
[00:20] <blissful> seems to have worked
[00:21] <Bashing-om> blissful: Yeah command ' /ignore #channel JOINS QUITS ' .
[00:21] <de-facto> milisman depends on which file manager you want to use, for gnome nautilus is the most common one which is integrated with gvfs (for handling file system protocols abstraction layer in the background). if you want to use that you probably should ask the #gnome developers about how to integrate your protocol in there
[00:21] <milisman> ok thanks de-facto
[00:23] <ShaRose> Wow. sudo apt-get install r8168-dkms really helped a lot.
[00:23] <ShaRose> I was suspecting it was a hardware failure :V
[00:23] <ShaRose> (my nic was getting ~80 mbps in and 60 mbps out even with iperf3)
[00:24] <velus> hello i have this conf file for my testing server im creating a site on http://pastebin.com/v387mpLc when i go to pagansocial.local/signup (which is setup in the site correctly) it comes up with a page not found, yet if i go to pagansocial.local it shows the home page if i add /home it says page not found (yet home is the home page) can someone please help me and point out where i have gone wrong please
[00:30] <blissful> date | awk -F
[00:30] <blissful> oops
[00:36] <tgm4883> velus: output of "/var/www/pagansocial/html" ?
[00:36] <tgm4883> err
[00:36] <tgm4883> velus: output of "ls /var/www/pagansocial/html" ?
[00:53] <jalec> hi everyone! I have a question. Still fairly new to linux in general...i tried out several distros and decided for now that ubuntu is the best fit. I did however really like the apt frontend on sparkylinux (APTus) so thought i'd try to install it on ubuntu. i managed to do it but now my ubuntu is calling itself SparkyLinux Desktop and is running noticeably slower....How can I fix this? I haven't even run APTus yet...I think in a system
[00:53] <beverly> HELP plz.
[00:53] <beverly> Its Beverly in NYC
[00:54] <cfhowlett> jalec, remove aptus
[00:54] <beverly> It keeps saying Password for DELL in Terminal Window - how do i clear the CAHE or UNINSTALL all Java plz. ??
[00:55] <jalec> when i try to do that in synaptic, it says its also going to remove a ton of programs
[00:55] <beverly> How do i get Password for DELL ?
[00:56] <beverly> what is GRUB Menu?
[00:56] <cfhowlett> jalec, proceed then sudo apt-get install --reinstall ubuntu-desktop     will get you back to normal uubuntu
[00:56] <coupe> hello there
[00:56] <beverly> BEVERLY needs your Help in getting a password for tewrminal Window
[00:56] <cfhowlett> !patience | beverly,
[00:57] <squinty> !patience
[00:57] <jalec> ok, going to try it, cfhowlett. thanks for the help
[00:58] <cfhowlett> happy2help! jalec
[00:58] <beverly> ...Can anybody give me a TELEPHONE # i can call to get UBUNTU assistance for my Desktop & retrieve a password or NEW 1 ?
[00:59] <beverly> >>>>>I am in NYC
[00:59] <cfhowlett> beverly, knock it off.
[01:00] <jalec> cfhowlett, mark for removal or complete removal? i'm guessing complete...
[01:00] <cfhowlett> this is a volunteer channel.  if yo need INSTANT answers, considering purchasing a support package from canonical. otherwise, be patient and wait your turn like everyone else.
[01:01] <cfhowlett> jalec, aptus should be removed then, DO NOT shutdown or logout, immediately install ubuntu-desktop
[01:02] <squinty> beverly,  you need to state exactly what you are trying to do or exactly what is not happening etc.  if you are trying to type in your user password in a terminal, you won't see anything displayed for security reasons.  just blindly type your password and then press the Enter key
[01:03] <jalec> okay. done. should i restart now? do I need to do anything else?
[01:04] <beverly> ....I dont have ANY PASSWORD - how doo i make a NEW 1 ??
[01:04] <tgm4883> beverly: you can make one in recovery
[01:04] <tgm4883> !recovery | beverly
[01:04] <beverly> I dont know how - GRUB Menu ?
[01:04] <beverly> it ays F-12 when it does BIOS ?
[01:05] <tgm4883> beverly: looking at the backlog, you aren't patient enough for me to want to help you
[01:05] <beverly> it says BOOT menu F-12 - is that GRUB ? or BIOS ??
[01:05] <antiPoP> hi, ubuntu ask for password too ofter, for example when I change the desktop wallpaper. how can I fix that?
[01:05] <tgm4883> beverly: bios
[01:05] <squinty> beverly,  try holding down the shift key immediately after your computer splash screen has been shown
[01:06] <beverly> ok - it wnet to Utility
[01:06] <Hierro59> Hi
[01:06] <Hierro59>  update of ubuntu studio 14 to 16 and can not find my files. Where they can be?
[01:06] <beverly> is F-12 the GRUB menu in Ubuntu 13.3 desktop ?
[01:06] <jalec> cfhowlett, should I reboot after reinstall ubuntu-desktop? just want to make sure
[01:07] <squinty> Hierro59, #ubuntu-studio
[01:07] <cfhowlett> jalec, yes, after reinstall
[01:07] <beverly> ...Ideally i am trying to CLEAN the CACHE & remove JAVA
[01:07] <cfhowlett> squinty he belongs here
[01:07] <jalec> cool. thanks much!!
[01:07] <Hierro59> squinty I have referred to this chat
[01:07] <squinty> beverly,  there is no ubuntu 13.03 and even if there was it would be eol (in other words dead)
[01:08] <ShaRose> beverly bit of a silly question, but is the computer you are trying to reset the password on yours?
[01:08] <beverly> ok - what i type in COMMAND to see what System i am Using PLZ> ?
[01:08] <squinty> beverly, lose the caps please
[01:08] <cfhowlett> beverly, 13.* has been dead and unsupported for some time now.  install a supported ubuntu
[01:08] <tgm4883> geez
[01:09] <beverly> ....Plz. tell me what to yppe in Command Line ?
[01:09] <tgm4883> beverly: 'lsb_release -a'
[01:09] <de-facto> cat /etc/lsb-release
[01:09] <beverly> it sayd Dell DV051 -$
[01:10] <beverly> yrusty ZORIN OS 9
[01:10] <beverly> Trusty
[01:10] <squinty> no supported here
[01:10] <cfhowlett> there it is.  OK, beverly.  we do not support zorin here.  at all.  no, not even a little.
[01:10] <beverly> whats that mean ZORIN ? i saw 13.3 before
[01:10] <cfhowlett> for zorin support, go to the zorin channels.
[01:11] <beverly> i saw Ubuntu 3.13.3
[01:11] <cfhowlett> beverly, zorin is a NOT-ubuntu operating system.  go to zorinos.com for assistance
[01:12] <tgm4883> beverly: support for your OS is in #ZorinOS
[01:12] <beverly> WOW - thanks i had thought i had UBUNTU 13.3
[01:12] <tgm4883> beverly: your welcome
[01:12] <beverly> He sold me this DESKTOP from CRAIGSLIST for $50 & said it was a LINUX OS
[01:13] <squinty> lose the caps
[01:13] <beverly> & my JAVA never loads
[01:13] <cfhowlett> zorin is a linux os.  it is not an ubuntu oOS.  for for $50 you did OK
[01:13] <tgm4883> beverly: still the wrong channel for support
[01:14] <jalec> cfhowlett, did everything you said, and upon reboot it is still displaying as sparkylinux desktop in the top lefthand corner of the screen. it looks like the ubuntu desktop and all but....
[01:14] <squinty> beverly,  or grab a ubuntu iso and install that
[01:14] <tgm4883> oh geez that is a sad channel
[01:14] <squinty> heh
[01:14] <beverly> No way am i Installing any OTHER oper. system - it should be ONE per desktop -no ?
[01:15] <squinty> beverly,  lose the caps   they are not needed.  and you can install whatever you want
[01:15] <cfhowlett> beverly, your choice.  at any rate, please take it up with #zorinos.  not here.
[01:15] <cfhowlett> jalec, could be hthat your system was renamed to sparklylinux.
[01:15] <FManTropyx> #ZorinOS has 3 people on it
[01:16] <beverly> so type in # Zorinat what .Com ?
[01:16] <tgm4883> beverly type  /join #zorinos
[01:16] <squinty> good reason to install ubuntu or some other well supported os then
[01:16] <cfhowlett> jalec, see: http://askubuntu.com/questions/523731/change-computer-name-after-installing-ubuntu-14-04
[01:16] <tgm4883> squinty: +1
[01:17] <Zenn> hello guys was wondering if you guys can help me out Im trying to run the following android Application
[01:17] <FManTropyx> there is also a brand new 16.04 out :)
[01:17] <Zenn> but it does not work :( on genymotion
[01:17] <Zenn> bluestacks only support windows
[01:17] <envy> i clicked "X" in the top corner to close rhythmbox, but songs keep playing, how do i properly close it without killing it via terminal? (found it does this by design. facepalm.)
[01:17] <jalec> yeah that could be it i guess....i just remember during a system update after installing aptus the terminal said something about replacing sparkylinux #.##.## over ubuntu #.##.## like I said, still learning so everything might be fine....i'll look at that link
[01:18] <tgm4883> Zenn: that sounds like a question for genymotion
[01:19] <squinty> envy,  iirc  File -> close
[01:20] <envy> squinty: but i can't click File for the rhythmbox window now that it is "hidden".
[01:20] <squinty> envy,  right click on your speaker icon   you maybe able to do it from there too
[01:21] <jalec> if i decide to just reinstall ubuntu, which flavor do you guys think is the most friendly for people still learning linux systems? i heard MATE is pretty good. I'm just using regular ubuntu right now
[01:21] <squinty> envy,  don't have any music files on this box right now, so am relying on memory.  maybe someone else can chime in if those suggestions don't work
[01:22] <envy> squinty: thanks! was able to "open" rhythmbox again and file->quit.
[01:22] <squinty> envy,  good to hear. :)
[01:22] <cfhowlett> jalec, truly want to experience deep learning of linux?  ubuntu-server.  no gui.
[01:23] <tgm4883> cfhowlett: that's brutal for a new user
[01:23] <jalec> maybe as an install on an external HD, but I want something pretty easy for my main install
[01:23] <cfhowlett> tgm4883, :)
[01:24] <cfhowlett> jalec, try this: install the official ubuntu of your choice.  maintain the system via the command line.
[01:24] <envy> strangest feature. X should be close. it's the international symbol for closing something completely. it's like someone screaming and waving wih their arms out at sea, he/she/it needs help.
[01:25] <jalec> so it's better to update that way, rather than using system update from the application menu?
[01:25] <cfhowlett> jalec, you will learn more from the command line.  the gui hides stuff from you for ease of users
[01:26] <tgm4883> not better, differen
[01:26] <guest55055> is apparmor the module that provides file permissions(ie read-write allowed by user/group etc)?
[01:26] <aidrocsid> trying to install ubuntu on my other machine with PXE, able to boot into it but it freezes as soon as i hit install
[01:26] <aidrocsid> just sitting there on the menu
[01:26] <jalec> and that's sudo apt-get update & sudo apt-get upgrade, right?
[01:26] <cfhowlett> sudo apt update && sudo apt full-upgrade
[01:26] <virtuosoj> anyone here running Wine on Ubuntu? should I go for stable or development version?
[01:27] <jalec> gotcha
[01:27] <tgm4883> guest55055: no
[01:27] <guest55055> so removing apparmor wont remove that feature?
[01:27] <Bashing-om> jalec: Bed time reading material: https://www.debian.org/doc/manuals/debian-reference/ch02.en.html#_debian_package_management_prerequisites .
[01:28] <tgm4883> guest55055: no, but that begs the questions. Why do you want to remove file permissions?
[01:28] <jalec> cool, thanks bashing
[01:28] <guest55055> i dont want to, just doing research into acl
[01:29] <tgm4883> this sounds like homework
[01:29] <Bashing-om> jalec: Get beyond the point and click .. it is a facinating world .
[01:29] <cfhowlett> this ^^!
[01:30] <tgm4883> +1
[01:31] <tgm4883> It's a world with job opportunities!
[01:31] <guest55055> tgm4883, the file permissions are set by acl right?
[01:31] <tgm4883> guest55055: you can set file permissions by acl if you install it
[01:32] <guest55055> so without it any user can change any file properties, right?
[01:32] <tgm4883> guest55055: what is your end goal here?
[01:33] <guest55055> dont know yet
[01:33] <guest55055> yes/no ?
[01:33] <tgm4883> guest55055: well figure it out, then come ask questions
[01:33] <jalec> cool, this will make for good reading material. thanks again! any other resources that you would recommend?
[01:33] <tgm4883> guest55055: https://www.linux.com/learn/understanding-linux-file-permissions
[01:34] <Rhorse> hi, is 16.04 set up to mount android phones automagically when plugged in?
[01:34] <cfhowlett> jalec, http://www.linuxlinks.com/article/20090405061458383/20oftheBestFreeLinuxBooks-Part1.html
[01:34] <guest55055> yes, but what enables/activates all those permissions?
[01:34] <guest55055> acl?
[01:35] <buu> Why does pavucontrol think my GK107 HDMI Audio Controller is unplugged when I'm watching video through that exact hdmi connection?
[01:36] <Piggybear87> Anyone know why my girlfriend can play offline, but not online?
[01:36] <jalec> alright, thanks guys. this was very helpful.
[01:36] <cfhowlett> she has no skillz?
[01:36] <Piggybear87> I mean "Red Eclipse has encountered a problem".
[01:37] <tgm4883> guest55055: is this for a class?
[01:37] <guest55055> no
[01:37] <Piggybear87> Oh, for some reason... I'm on the wrong channel... Lol.
[01:37] <guest55055> its for understanding
[01:37] <guest55055> just say yes or no
[01:37] <Bashing-om> jalec: http://ubuntuguide.org/wiki/Ubuntu_Trusty .
[01:38] <guest55055> tgm4883, is the package acl what enables all those permissions?
[01:38] <jalec> bashing, would you recommend trusty over xenial?
[01:38] <tgm4883> guest55055: no
[01:38] <Bashing-om> guest55055: Linux .. there is no yes or no .. only options .
[01:39] <cfhowlett> jalec, they are both LTS.  I will remain on trusty until 16.04.1 comes out.
[01:40] <andy__> i'm using lubuntu 14.04.  my download speed is around 7 mbps on the 1st floor. i have a wifi extender already.  my normal speed is 60 mpbs
[01:40] <andy__> i want to make sure that my wifi driver is the best version
[01:40] <andy__> how do i check please
[01:45] <JanC> buu: is audio enabled in that HDMI display?
[01:49] <velus> tgm4883, sorry i wnt to fix somethign for a mate and one sec i will do the ls now
[01:49] <velus> index.php and app (folder for the site application)
[01:50] <tgm4883> velus: so there is no "home"?
[01:52] <velus> home page is in app/views/pages/main/index.php (which is the main page of the site) the index page collects what is after the domain i.e /home then will check the db then get the file name and catagory i.e index.php then will load the file from /app/views/pages/{catagory}/{file} and load that. it worked on my windows system ok (when i started building it) but now it wont work
[01:52] <virtuosoj> I accidentally typed this into terminal: "sudo dpkg --add-architecture 1386 "
[01:52] <virtuosoj> instead of i386. How do I reverse that command and remove the architecture?
[01:55] <OerHeks> virtuosoj, awesome .. if that command did not return an error
[01:55] <tgm4883> virtuosoj: man dpkg
[01:57] <gshmu> where can i set apt to using proxy, /etc/apt/apt.conf not work at Ubuntu 16.04
[01:59] <Zenn> is this true that microsoft is spying on us o.o\
[01:59] <FManTropyx> yes
[01:59] <velus> tgm4883, can you help please
[02:00] <jadenpete> Anyone know of some free, addicting games for Linux?
[02:00] <cfhowlett> !games | jadenpete
[02:01] <tgm4883> velus: I'd restate your question and wait for others to chime in
[02:01] <OerHeks> gshmu, apt + proxy, "System Settings/Networking/network proxy" handles that, choose manual configuration; this updates "/etc/apt/apt.conf"
[02:01] <jadenpete> ty
[02:02] <gshmu> OerHeks, I edit the file, and I don't want set system proxy
[02:02] <OerHeks> Zenn, mail them to read our sourcecode
[02:02] <Zenn> interesting
[02:04] <OerHeks> well, networkmanager handles that, AFAIK, so that might bite.
[02:05] <gshmu> OerHeks, thanks you, I find testing "select best server" do not using this conf
[02:05] <aidrocsid> pxe install just finished up now it's just sitting there after a reboot saying "lvmetad is not active yet, using direct activation during sysinit" x2 and then "/dev/mapper/NAME--vg-root: clean, 54880/30236672 files/ 2193605/120926208 blocks"
[02:05] <aidrocsid> any advice?
[02:05] <iulian> maybe  in /etc/apache2/apache2.conf and there add <Directory /home> so that apache knows it is OK to access the area
[02:05] <Kurogane> hey guys, how i can check what php version and modules i have installed?
[02:06] <iulian> /etc/apache2/.conf
[02:06] <andy__> do lubuntu use the wifi driver like ubuntu?
[02:06] <andy__> do lubuntu use the wifi driver like ubuntu?
[02:09] <lunarmage> which package contains the Python module pynotify (Ubuntu 16.04)
[02:10] <velus> hello i have this conf file for my testing server im creating a site on http://pastebin.com/v387mpLc when i go to pagansocial.local/signup (which is setup in the site correctly) it comes up with a page not found, yet if i go to pagansocial.local it shows the home page if i add /home it says page not found (yet home is the home page) can someone please help me and point out where i have gone wrong please
[02:11] <OerHeks> lunarmage, http://packages.ubuntu.com/xenial/amd64/python-notify/filelist
[02:12] <lunarmage> OerHeks: oh, I was using python-notify2
[02:13] <de-facto> Kurogane  you can create a file in your webroot like "echo "<?php phpinfo(); ?>" > info.php and open that with your browser (through your webserver). note you might get better support in ##php and #httpd
[02:15] <Kurogane> de-facto, thanks but i find better solution with dpkg -l thanks.
[02:15] <iulian> velus, look in /etc/apache2/.conf  and there add <Directory /home>
[02:15] <velus> i dont get what you mean?
[02:16] <de-facto> velus support in ##php and #httpd
[02:16] <velus> i have asked in there but there is no reply all day
[02:16] <velus> well not to me
[02:18] <de-facto> velus this is not really ubuntu specific, but you might find more info to hint you to a solution if you look in the log files (i guess in /var/log/apache2/*)
[02:19] <gshmu> why `apt-get upgrade`  3 not upgraded of kernel
[02:20] <zykotick9> gshmu: try "apt upgrade" or "apt-get dist-upgrade"
[02:22] <gshmu> zykotick9, thanks it's working
[02:23] <iulian> just add line  <Directory /home> something like http://paste.ubuntu.com/16270958/
[02:24] <velus> in the access it says its not found, and in error.log nothing
[02:29] <bynarie> so i have 2 text files that contain various different words, some duplicate words in each file. whats a good way to merge the 2 text files into 1 text file while stripping duplicates???
[02:31] <OerHeks> bynarie, diff "File_1.txt" "File_2.txt" ( or install a graphical app like meld)
[02:31] <OerHeks> !info meld
[02:32] <bynarie> i have meld, but im not quite sure how to "merge"
[02:32] <de-facto> bynarie are the words each on one line separately?
[02:32] <bynarie> no
[02:32] <bynarie> just spaced
[02:33] <aidrocsid> so like ubuntu should be installed here but all i see is /dev/sda1: clean, #/# files, #/# blocks
[02:33] <de-facto> you could replace all spaces with newlines, then "cat file1 file2 | sort -n | uniq > file3" then replace all newlines with spaces
[02:33] <de-facto> bynarie ^^
[02:33] <aidrocsid> blinking cursor, nothing else
[02:33] <bynarie> de-facto, thank you
[02:34] <aidrocsid> what's up with that
[02:36] <de-facto> aidrocsid i guess we would need more info to help you
[02:36] <aidrocsid> okay so i did a pxe install and after the reset it just says /dev/sda1 clean
[02:36] <aidrocsid> and then numbers/numbers files, numbers/numbers blocks
[02:37] <aidrocsid> seems to just hang on the cursor forever after that
[02:37] <aidrocsid> second time i've done the PXE install and it's done it both times
[02:38] <de-facto> aidrocsid well how did you install it? which version of ubuntu? did you install a gui? what do you expect to happen?
[02:38] <aidrocsid> I installed ubuntu 16 LTS over PXE, command line install
[02:39] <aidrocsid> i expect that after it says to reset because the install is complete that i can boot into the drive and it will be installed
[02:39] <aidrocsid> instead it apparently tells me that the drive is clean and then sits there
[02:40] <de-facto> aidrocsid hmm so did you install a gui or just text mode headless (like a server version)? anyways you should end up at a login screen of some type i guess
[02:41] <aidrocsid> i installed the standard ubuntu LTS, not server edition
[02:41] <aidrocsid> yeah, it's just hanging at a blank cursor
[02:42] <de-facto> aidrocsid why did you install in text mode? did you test the gui with a livecd on that box?
[02:42] <buu> fuck computers forever
[02:42] <aidrocsid> because i'm installing it over PXE and it was taking forever to load the full installer
[02:42] <kajo> Hi. I'm trying to use a monitor, but the EDID seems to be no good, so it won't connect. I've tried following instructions on google to edit xorg.conf and use an online edid, but no dice. Can anyone help me? It's to use a Shimian QH270 27" 1440p monitor, if you know about it (bit of a following)
[02:42] <aidrocsid> shouldn't really make a difference, the text installer for ubuntu works fine
[02:44] <de-facto> aidrocsid can you switch to tty1 with ctrl + alt + f1  and login there?
[02:44] <aidrocsid> hey there we go
[02:45] <aidrocsid> okay i have a command line
[02:45] <de-facto> look for some log files which indicate what went wrong
[02:45] <aidrocsid> did i maybe not actually get the wm?
[02:45] <de-facto> also check dmesg, journald and systemctl
[02:46] <de-facto> well normally you can restart it via "sudo systemctl restart lightdm" i guess
[02:46] <de-facto> if it did not fail way before that
[02:46] <aidrocsid> lightdm.service: unit lightdm.service not found
[02:47] <de-facto> aidrocsid but you expect to have installed the gui version, right?
[02:47] <de-facto> not sure what you did in the installer
[02:47] <aidrocsid> well i just downloaded the version that the pxe tutorial directed me to
[02:47] <Bashing-om> aidrocsid: Desktop ? Anything ' echo $DESKTOP_SESSION " " $XDG_CURRENT_DESKTOP ' ?
[02:47] <aidrocsid> it could be a version with no GUI for all i know i suppose
[02:48] <aidrocsid> is that all one command
[02:49] <Bashing-om> aidrocsid: Opps bad paste : both -> echo $DESKTOP_SESSION " " $XDG_CURRENT_DESKTOP
[02:49] <Bashing-om> env | grep XDG_CURRENT_DESKTOP
[02:49] <aidrocsid> lol i typed what you said before and now it's just on a blinking cursor again
[02:49] <Dubdotcalm> Dang
[02:50] <aidrocsid> should i reset or is there a way to get out of that
[02:50] <joe__> Hi. I have a problem with MATE 1.12.1The screen just goes blank on occasion. I am unable to do anything at that point except reboot. I am running on HP Pavilion. Any ideas what I can look at to correct this?
[02:50] <kajo> (If it's not taboo, I'll repost every once in a while looking for help... will try to make sure it's been long enough to fall off the screen) ---> I'm trying to use a monitor, but the EDID seems to be no good, so it won't connect. I've tried following instructions on google to edit xorg.conf and use an online edid, but no dice. Can anyone help me?
[02:50] <kajo> It's to use a Shimian QH270 27" 1440p monitor, if you know about it (bit of a following)
[02:51] <aidrocsid> there we go
[02:53] <aidrocsid> i'm gonna install lxde
[02:53] <Bashing-om> aidrocsid: My 1st paste is correct ... sysop@1404mini:~$ echo $DESKTOP_SESSION " " $XDG_CURRENT_DESKTOP >> xfce   XFCE .
[02:55] <aidrocsid> i guess i should install lightdm too if it isn't there yet
[02:56] <de-facto> aidrocsid there are meta packages which install a full gui desktop and require also the login managers as depencency
[02:56] <Bashing-om> aidrocsid: Might see if the X layer is installable / What returns ' dpkg -l xorg ' ?
[02:56] <aidrocsid> will lxde requrie all that? it had like 1000 dependencies to install
[02:56] <aidrocsid> well right now it's busily installing lxde
[02:57] <de-facto> i guess it requires all it needs to start into a gui DE
[02:58] <aidrocsid> so like what's the difference between something like peppermint and a minimal ubuntu build with lxde?
[02:58] <aidrocsid> is it even worth it to then juggle partitions to get peppermint on there?
[02:59] <de-facto> aidrocsid not sure what you mean by peppermint, but linux-mint is not supported here if you meant that
[02:59] <aidrocsid> peppermint is some variety of ubuntu that runs lxde
[03:00] <aidrocsid> but i think they put some stuff that's usually packaged with mint in there too
[03:00] <de-facto> ah ok but not an official ubuntu flavor i guess
[03:00] <aidrocsid> yeah i'm just wondering like system wise what the difference with something like that even is
[03:00] <aidrocsid> if it's ubuntu-based does that just mean it's ubuntu with a different WM and a different selection of programs?
[03:00] <buu> How do I tell if my video card is outputting hdcp2.2?
[03:01] <jsi> hi
[03:01] <OerHeks> aidrocsid, the difference is great support.
[03:01] <jsi> what happened ubuntus software center
[03:01] <jsi> it sucks now
[03:01] <jsi> I cant even locate wine
[03:02] <aidrocsid> well if that's the *only* difference aside from WM and programs that's kind of a no-brainer
[03:05] <elky> aidrocsid: the official ubuntu lxde offering is called lubuntu and has a channel at #lubuntu. we have no control over and can't answer for changes made by other derivatives.
[03:06] <jsi> why are there so many programs not showing in the ubuntu software center, like wine?
[03:07] <OerHeks> jsi check if you have univers repo enabled in sources
[03:07] <OerHeks> !info wine
[03:07] <OerHeks> package size 0kb.
[03:08] <OerHeks> installed size 6 kb .. magic
[03:08] <jsi> OerHeks: well when I type sudo apt-get download wine it gives an error
[03:09] <jsi> before it would install in the previous versions of ubuntu
[03:09] <OerHeks> apt-get install wine .. or just apt install wine
[03:09] <aidrocsid> yeah i don't expect you to elky i just am wondering what the actual difference is
[03:09] <jsi> Reading package lists... Done Building dependency tree        Reading state information... Done E: Unable to locate package wine
[03:10] <elky> aidrocsid: i can't answer that because i know nothing of peppermint.
[03:10] <OerHeks> jsi again: check if you have univers repo enabled in sources
[03:10] <Ph1LZ> hey! quick question regarding 16.04: I'm changing my /etc/network/interfaces.d/50-cloud-init.cfg from dhcp to static IP but I'm losing my changes at each reboot. Can someone help me please? ( 16.04 server on EC2 )
[03:10] <dax> (maybe the peppermint folks would know better?)
[03:10] <dax> Ph1LZ: if you don't get an answer here, #ubuntu-server might be helpful
[03:10] <aidrocsid> yeah the peppermint channel is dead, i thought maybe you guys might know about variation distros in general
[03:11] <Ph1LZ> oops.. you're right! thank dax
[03:11] <aidrocsid> like whether they're just WMs and programs or if there's some fundamental real difference like changes to the operating system itself
[03:11] <Dubdotcalm> Jsl - http://www.ubuntumaniac.com/2016/01/install-wine-190-on-ubuntu-linux-mint.html?m=1
[03:11] <elky> aidrocsid: well if the channel is dead, then one difference is that the #lubuntu channel is not, and can thus actually support you :)
[03:11] <aidrocsid> that's true they might know more about it
[03:11] <OerHeks> Dubdotcalm, really? mint help pages in ubuntu channel
[03:11] <kajo> Hey anyone who can help with xorg.conf and EDID stuff, having trouble getting a monitor properly interfacing with ubuntu 14.04. Thanks.
[03:11] <elky> aidrocsid: yeah someone there is likely to have poked at peppermint at some point
[03:12] <Dubdotcalm> Oops. Wrong clipboard. My bad
[03:12] <aidrocsid> have you used other variant distros though elky?
[03:12] <gbit86> I have ran into some sort of keymapping glitch on 16.04 that affects both xmodmap and xkbcomp, the first time my autostart "keyboard.desktop" file kicks off my shell script it works fine until I suspend my computer and wake it back up. My keys will then revert back, but if I logout and log back in it is fine, and going into suspend and waking back up also
[03:12] <gbit86> works fine.
[03:12] <aidrocsid> do you know what they tend to be?
[03:12] <elky> aidrocsid: not in a while
[03:12] <OerHeks> Dubdotcalm, he just needs to check universe
[03:12] <Guest97755> I need some guidance on troubleshooting usb wifi. SOmetimes when I boot, its not there, if I restart network manager, it sometimes appears. I need it to appear every time
[03:13] <Dubdotcalm> Yeah, I googled and copied from Mint deriv by mistake.
[03:13] <Guest97755> this is the output of lsusb http://pastebin.com/FGTJfNwp
[03:13] <Dubdotcalm> Realistically should have just linked Google lol
[03:14] <Guest97755> im on 16.04
[03:20] <OerHeks> gbit86, debian answer, could not find an ubuntu eq. >> http://unix.stackexchange.com/questions/59623/custom-keyboard-layout-is-reset-to-default-after-standby-or-reboot
[03:21] <OerHeks> or maybe i am totally wrong
[03:22] <gbit86> Ah, thanks OerHeks. I saw a similar thread, and I have tried some of the suggestions, but one of the commenters mentioned a few things I have not read yet.
[03:24] <gbit86> It is still a very odd bug to me, because while re-issuing the command every time coming out of sleep may fix it, it is also something that is not issue if you login, logout and log back in a second time and that is what bothers me. To know that this behavior is only repeatable on the 1st login, it feels like a type of glitch, not something that fails by
[03:24] <gbit86> design.
[03:24] <gshmu> I'm setting the apt using proxy, but this seeming some bug
[03:24] <gbit86> not an* issue if you (etc.)
[03:25] <OerHeks> well, ~/.xsession is not read after suspend/sleep
[03:25] <gbit86> I think I may find a way to skip it altogether. I'd rather set it in a more permanent way and not worry about maintaining it via scripts at all.
[03:25] <gshmu> apt update and select best server, no connection with proxy
[03:26] <gbit86> right but the second comment mentions "/etc/pm/sleep.d"
[03:26] <gbit86> this also has some plausible solutions as well http://askubuntu.com/questions/661715/make-a-script-start-after-suspend-in-ubuntu-15-04-systemd
[03:26] <meridel> Hello there
[03:27] <meridel> Anyone has any problem with jar executable files ? Looks like my java crashes...
[03:56] <q_> hi
[04:02] <Kurogane> how i can get this promt again? http://pastie.org/private/ozjbcamn3pjb4bbkmzgwsa
[04:06] <Bashing-om> Kurogane: ' sudo dpkg-reconfigure <package> ' maybe ?
[04:11] <mangyan> t
[04:12] <mattwj2002> hi guys
[04:12] <mattwj2002> could I get invited to #ubuntu-social please?
[04:14] <YokoBR> hi folks
[04:14] <YokoBR> hmmmm, anybody unsing docker + php + mongodb + ubuntu 16.04?
[04:15] <mattwj2002> can someone tell me more about these ubuntu tablets/
[04:15] <mattwj2002> does it run full ubuntu?
[04:34] <YokoBR> guys please
[04:34] <Ghost_r00t> hello sirs;
[04:34] <YokoBR> how to i install mongo driver on ubuntu 16.04 with php5?
[04:36] <Ghost_r00t> tell me how to set -variant switch for one of this layout in setxkbmap? **setxkbmap -layout "us,ru" -option "grp:alt_shift_toggle"**
[04:36] <Ghost_r00t> or any other way that one could issue the setxkbmap command
[04:43] <Bashing-om> Ghost_r00t: To add a keyboard layout using LXDE (change "jp" for your default, and "ch(fr)" for your second layout): setxkbmap -layout "jp,ch(fr)" -option "grp:alt_shift_toggle" .
[04:47] <Ghost_r00t> Bashing-om, thank you mate; just a set of "()"
[04:47] <Ghost_r00t> really !!!!!
[04:50] <Bashing-om> Ghost_r00t: If that works for ya, to make it permanent , add the command at the end of your /home/user/.bashrc file .
[04:50] <Ghost_r00t> Bashing-om, yup. It did
[05:03] <Bashing-om> Ghost_r00t: Good deal . :)
[05:07] <administrador> Hola. Tengo Lubuntu 14.04 64bits. Acabo de instalar el driver amdgpu-pro_16.15.2-277429 y Vulkna, di reboot, pero no se como accesar una GUI para modificar la resolucion de mi monitor
[05:08] <lotuspsychje> !es | administrador
[05:08] <administrador> I thought I was in Lubuntu-es XP
[05:08] <wiki> #szdiy
[05:08] <wiki> --help
[05:09] <Guest1835> #join szdiy
[05:09] <Guest1835> fast type
[05:10] <administrador> sorry... But you might help. I am using Lubuntu 14.04 64bits. I have installed the amdgpu-pro_16.15.2-277429 driver and  Vulkan, rebooted but I do not know how to access a GUI to change my monitor resolution
[05:14] <Ghost_r00t> Bashing-om, I read that it is also possible to put it in X11 xorg config file too. YES?!!??
[05:15] <Ghost_r00t> Bashing-om, not the command per say but as xml directives.
[05:15] <omkar__> can I upgrade kubuntu 12.04 to kubuntu16.04
[05:15] <dchapman> !kubuntu | omkar
[05:17] <lotuspsychje> omkar__: first upgrade to 14.04,then wait until 16.04.1 comes out
[05:17] <lotuspsychje> !ltsupgrade | omkar__
[05:18] <Ghost_r00t> omkar__, the version bump is a bit problematic. you may encounter miss matches and things not working. but if you are able to troubleshoot, you would be fine.
[05:18] <Ghost_r00t> just change your source.lst and do sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade
[05:19] <Ghost_r00t> goof luck omkar__
[05:19] <omkar__> oik
[05:19] <omkar__> so the suggested way could be to upgrade 14.04 first
[05:19] <omkar__> and then may be upgrade that to 16.04
[05:20] <omkar__> coz earlier i have upgraded machines from 12.04 to 14.04
[05:20] <omkar__> using digitalocean article and it went fine
[05:20] <Ghost_r00t> omkar__, bit better I guess. but too much stuff to download. depends of your time
[05:20] <Bashing-om> Ghost_r00t: Maybe, I have never been there or given it any thought ., I do not see how playing around in the X layer would have the desired effect .
[05:20] <Ghost_r00t> */depends of/depends on
[05:22] <Ghost_r00t> Bashing-om, so you suggesting the bash part?
[05:22] <Ghost_r00t> now tell me this How to enforce that setxkbmap command to execute per window?
[05:23] <Ghost_r00t> that is another issue that eluded me so far
[05:26] <Bashing-om> Ghost_r00t: just add the command - setxkbmap -layout "jp,ch(fr)" -option "grp:alt_shift_toggle" - to the end of your /home/user/.bashrc file. log out and back in for it to take effect .
[05:27] <Ghost_r00t> Bashing-om, no way to tell setxkbmap to enforce the layout change per window?
[05:28] <Bashing-om> Ghost_r00t: I would ecpect it to be global within your user session .. no ?
[05:31] <rajiv1> I am using "geary" as my  email client. Whenever i delete a mail from the inbox, geary crashed. I don't know why this is happening. i am using ubuntu-mate 16.04 lts. Any body please help me.
[05:34] <omkar__> one of the programmer in my offices uses ubuntu but the problem she is not able to load emails in thunderbird cause the email server is on windows exchange server
[05:39] <administrador> Hello. I am using Lubuntu 14.04 64bits. I have installed the amdgpu-pro_16.15.2-277429 driver and  Vulkan, rebooted but I do not know how to access a GUI to change my monitor resolution
[05:55] <shanmuk> hai
[05:58] <Ghost_r00t> Bashing-om, it is global I want it to be per-window
[06:02] <Bashing-om> Ghost_r00t: I can not think of a way to give each window a separate instance . But there should be a way .
[06:03] <Ghost_r00t> Bashing-om, there is a program in sourceforge with a name perwindow....something
[06:04] <Ghost_r00t> but I want to know how xfce and such (WM/DE)s do this job?
[06:04] <craZZter> Vagrant image for 16.04... Anyone know user/pass? First guess was vagrant/vagrant but no... Seems to use "ubuntu" as username but no obvious password seems to work
[06:07] <Bashing-om> Ghost_r00t: The is the channel #xfce with some mighty smart folks .
[06:10] <danjah> greets
[06:10] <danjah> anyone here?
[06:12] <wafflejock> danjah, hello
[06:12] <wafflejock> danjah, do you have an ubuntu support question?
[06:17] <danjah> hi, sorry, yes i do have one
[06:19] <danjah> i've googled quite a bit on this one, no avail so far. recently converted to ubuntu from win 10. wondering why my cursor seems to "slip off the edge" of the right hand side of my screen. i have "sticky edges" disabled, and there's no obvious display bugs. my updates are uptodate, i check i have active settings for nvidia graphics card, seems i do.
[06:19] <danjah> any ideas?
[06:21] <danjah> @wafflejock i guess using @* will bing you
[06:21] <danjah> maybe not
[06:21] <cfhowlett> danjah, posting the nick is sufficient to ping
[06:21] <danjah> gotchya, thanks cfhowlett
[06:23] <danjah> im not in a hurry to solve my query, but this seems to be just one UX thing that's bugging the heck out of me. scrollbars are typically right-aligned, and so when my cursor takes some extra milliseconds to get into place to scroll... well it's irritating
[06:23] <Mao> help needed :) my launcher and panel is gone all i see is walpaper and i was able to open terminal and wright pidgin :)
[06:24] <danjah> im on ubuntu 16 LTS, which i understand is the latest and quite recent, but subsequent installs i've tried in my journeysinclude ubuntu 12 and 14 and had the same thing annoy me
[06:26] <Mao> my launcher and panel is gone all i see is walpaper and i was able to open terminal and wright pidgin
[06:30] <Kirkland_Signatu> fgt
[06:31] <Kirkland_Signatu> xD
[06:31] <Kirkland_Signatu> i memed
[06:32] <cfhowlett> Kirkland_Signatu, this is ubuntu support.  check your channel or stay on topic please.  thank you.
[06:32] <Kirkland_Signatu> nou
[06:34] <Cedara> Morning, for Ubuntu 16.04, is there another tool besides sysinfo to get out the system info? I liked it because it's graphical but it crashes repeatedly.
[06:35] <Seveas> Cedara: lshw
[06:36] <Cedara> Is that Hardware Lister in the software center?
[06:36] <Kirkland_Signatu> be quiet gay Cedara
[06:36] <cfhowlett> !ops | Kirkland_Signatu
[06:37] <Kirkland_Signatu> kek
[06:37] <Seveas> Cedara: no, it's a terminal command that's installed by default.
[06:37] <Cedara> okay
[06:37] <Cedara> can do that
[06:38] <Kirkland_Signatu> ubottu wew
[06:38] <Cedara> thanks, Seveas
[06:38] <craZZter> Cedara: Quite often it's enough to take a look under /proc/*
[06:39] <craZZter> Like /proc/cpuinfo
[06:39] <Cedara> okay
[06:40] <Kirkland_Signatu> NIGGER ROFL
[06:40] <Kirkland_Signatu> XD
[06:41] <Kirkland_Signatu> ayy
[06:43] <Kirkland_Signatu> BLAC PEOPLE ROFL
[06:50] <danjah> kk no answers here
[06:54] <travis_> Hi guys I'm currently getting very poor preformance running Ubuntu 16.04 on a HP 2000-210US laptop, I believe its the graphic driver. I installed the propritary one via additional drivers but it didnt seem to have any affect even after rebooting. Previously it was running Windows 7 without issue. Basically anything I do causes the computer to bogg down. Is there anyone who knows how I can solve this? My HP DV6 with NVidia with the
[06:54] <travis_> same ram doesnt have this issue with 16.04.
[06:57] <Gothjymz> https://allanbogh.com/2016/01/05/ubuntu-16-04-installing-the-intel-graphics-drivers-using-the-intel-graphics-installer-for-linux/
[06:58] <sins> !
[07:01] <travis_> Gothjymz- Thanks!
[07:05] <Gothjymz> welcome ^^
[07:20] <travis_> The installer looks like it's working. If it does work I'll let you know.. If not, then something went wrong :)
[07:23] <ux2> Hello
[07:23] <mahfiaz> hi
[07:23] <ux2> mahfiaz: how are you
[07:23] <mahfiaz> I
[07:24] <mahfiaz> I'm fine, how are you? any problems with ubuntu?
[07:24] <ux2> Not yet
[07:24] <mahfiaz> good for you :)
[07:29] <travis_> Awesome. My graphics issues are fixed! :) Thanks again!
[07:32] <^Mike> When you set up a VPN connection in network manager, where is that data stored? I'm trying to recover that file from a backup, but I don't know where it is
[07:35] <CarlenWhite> Weird. I was pinged.
[07:35] <CarlenWhite> I saw that baizon.
[07:35] <baizon> CarlenWhite: windows 10 :/
[07:36] <CarlenWhite> Yeah I know. I'm trash for using Windows etc etc.
[07:36] <ux2> Nice
[07:36] <CarlenWhite> But I have a Ubuntu file server and a Ubuntu home server so shush.
[07:38] <CarlenWhite> Later I'll be using a Ubuntu Server to serve SSH sessions to small computers, probably Raspberry Pis, for a inventory management system.
[07:43] <ducasse> ^Mike: /etc/NetworkManager/VPN/
[07:43] <Abe_> aaaahhh I shouldn't have done this :( now i needed to reinstall... and then i needed to go back to 14.04.. cuz 16.04 isn't even half done yet with it's 1000 bugs..
[07:43] <Abe_> sorry 10000000 bugs
[07:44] <Abe_> at least 14.04 is kinda stable.. doesn't matter i wanted to make a fresh install anyway...
[07:46] <Mao>  is it save to install cinnamon desktop 3.20 on ubuntu 16.04 ?
[07:47] <ducasse> Mao: it is safe to install the version in the repos, anything else is unsupported here.
[07:48] <Mao> ducasse: what exactly you mean ?
[07:48] <ducasse> Mao: if it's not the version in the repos then we won't help you if you get problems.
[07:49] <Mao> ok thx
[07:50] <Abe_> Mao: I wouldn't even use 16.04 yet.. the screen locker freezes, apt-get update gave me an Metadata broken error,The driver Manager is broken, I need to type in 10000 times my wifi password before it even tries to connect.. so weird some thing's in there. after 14.04 support runs out I'm switching to a different distro. not sure which one, but i will
[07:50] <Abe_> sorry wasn't even your question xD
[07:51] <ducasse> Abe_: xenial works perfectly for me.
[07:51] <Mao> Abe_: np mate
[07:51] <xntht_> thanks for the heads up. I was doubtion to upgrade to 16 lts. on 15.10
[07:51] <Abe_> ducasse: which DE are U using ??
[07:51] <xntht_> Abe_: thanks
[07:52] <ducasse> Abe_: none, I use i3.
[07:52] <Abe_> It's probably just KDE
[07:52] <ducasse> Abe_: ?
[07:52] <Abe_> I'm using KDE don't upgrade yet it's still to buggy wen't back to 14.04
[07:53] <ducasse> Abe_: oh, yes, that's possible. I tried Plasma a while back and it was horrible.
[07:53] <Abe_> The new KDE desktop is very buggy, not even ready yet
[07:53] <xntht_> so what about Unity?
[07:54] <Abe_> I don't know only tried the live CD, but I would stay with 14.04 as long as possible
[07:54] <auronandace> xntht_: i've had no problems with unity on 16.04
[07:55] <Abe_> Yes maybe Unity is more stable but the new KDE D-:
[07:55] <thirdwhl> All, in upstart how can you set up a program to run under a tty you can Ctrl+Fn to see?  It's easy to do under sysvinit by editing the /etc/inittab but I don't see how to do this in upstart
[07:56] <Abe_> I wrote down all the bugs I encountered, and reportet them all
[07:56] <Abe_> but went back to 14.04 after that
[07:57] <thirdwhl> s/Ctrl/Alt/
[07:58] <Abe_> I also cannot boot the 16.04 live CD anymore?? first times it bootet up with no problems, Now it won't boot the Live CD... It's completely unlogical to me...and somehow even impossible?
[07:58] <Abe_> cuz I'm using the same "DVD" sorry
[07:58] <xntht_> auronandace: cool :)
[07:58] <baizon> Abe_: windows did block it
[07:58] <Abe_> I don't have windows
[07:59] <Abe_> I don't use it since XP ran out :D
[07:59] <baizon> Abe_: im just kidding, sorry
[07:59] <Abe_> no need to apologize ?
[08:00] <ducasse> Abe_: UEFI or Legacy BIOS?
[08:01] <Abe_> UEFI but it bootet up with no prob.
[08:01] <Abe_> Now it doesn't ?
[08:02] <Abe_> well It says "Start Kubuntu" and it loads and just leaves me with a blank screen.
[08:02] <Abe_> first times it bootet up ?
[08:02] <ducasse> Abe_: what GPU?
[08:02] <Abe_> completly impossible somehow
[08:03] <Abe_> processor type? I3
[08:03] <ducasse> Abe_: no, graphics.
[08:03] <Abe_> oh sorry
[08:03] <Abe_> need to look wait
[08:04] <ducasse> Abe_: GPU = graphics, CPU = processor.
[08:04] <Abe_> yeah sorry xD
[08:04] <Abe_> Geforce GT 730M
[08:04] <Abe_> 2gb memory
[08:06] <Abe_> ah have a question
[08:06] <Abe_> when I was in 16.04.. when it still bootet
[08:07] <Abe_> it gave me the driver option via terminal cuz additional driver wouldn't load in the gui... nvidia-361
[08:07] <Abe_> in 14.04 i only get nvidia-352
[08:08] <rubiksmomo> Any idea why I get a blank error dialog when trying to select nvidia/performance in prime settings?
[08:08] <Abe_> could I install the nvidia-361 in 14.04 anyway? even though it isn't in my recommended list?
[08:08] <xntht> how can one make sound work properly on Skype (ubuntu 14 lts)?
[08:08] <ux2> xntht: tried preferences ?
[08:09] <xntht> I can hear the other person but my voice just echoes and doesn't reach the other end
[08:09] <Abe_> skype preferences, or sound preferences.. after that do a skype test call
[08:09] <xntht> ux2:tried everything
[08:09] <craZZter> Should anyone by any chance use Vagrant for Ubuntu16.04 - and happen to know the credentials for the official basebox? They don't seem to be vagrant/vagrant as is the most common
[08:09] <rubiksmomo> xntht, Do you have the same issue with Skype closed?
[08:09] <xntht> and I'm not even a n00b. I never had this problem before
[08:10] <ducasse> Abe_: no idea, but if the proprietary driver has problems why don't you try nouveau?
[08:10] <xntht> rubiksmomo.
[08:10] <xntht> I tried that too
[08:10] <Abe_> ducasse: The proprietary driver works fine. but in 16.04 I get a newer driver recommended
[08:10] <rubiksmomo> Abe_, sudo add-apt-repository ppa:graphics-drivers/ppa ; sudo apt-get update
[08:11] <rubiksmomo> xntht, And? Does the sound echo without Skype?
[08:11] <xntht> It's my girfriend's old notebook which was painfully slow on Wİndows so we decided to put peppermint 6 (which is basically 14lts)
[08:11] <Abe_> rubiksmomo: thank's I will try.. cuz I want the nvidia-361 now :D
[08:11] <cfhowlett> xntht, peppermint is NOT ubuntu OS and is not supported here.  sorry.  go to the peppermint site for your support options
[08:12] <rubiksmomo> Abe_, good luck ^_^
[08:12] <Abe_> even if it f* up my system... need to start here from scratch anyway
[08:12] <xntht> oh. ok
[08:13] <rubiksmomo> Abe_, You could ctrl+alt+f1 to open tty1 and fix it. Or hold left shift at startup and choose recovery.
[08:14] <Abe_> yes I know tty thx I would do sudo apt-get remove nvidia-361... sudo apt-get install nvidia-352
[08:15] <rubiksmomo> Abe_, sounds like a plan :)
[08:15] <Abe_> uuuu it even recommend's me nvidia-364 wow
[08:15] <minas114> Hello! Let's say I have two deb packages installed, P1 and P2, both depend on package C. If I uninstall P1, C will not get removed, right? i.e. apt-get will keep track of how many packages are using C.
[08:15] <EriC^^> minas114: true
[08:16] <Seveas> minas114: no
[08:16] <minas114> EriC^^, Thanks
[08:16] <minas114> I will remove aptitude then
[08:16] <Seveas> minas114: C will not get removed, but apt does not keep track of how many packages depend on it, jus that there's at least one remaining :)
[08:17] <rubiksmomo> Any idea why I get a blank error dialog when trying to select nvidia/performance in prime settings?
[08:17] <Abe_> but I hate how they release half made sh*t.. I once said already, it's like a permanent beta
[08:18] <Abe_> rubiksmomo: no but you could do
[08:18] <Abe_> sudo prime-select nvidia
[08:18] <Abe_> or sudo prime-select intel
[08:19] <Abe_> oh that wasn;t your question...
[08:19] <Abe_> i always have to do that
[08:19] <EriC^^> enter key.. rest in peace
[08:19] <EriC^^> 2003-2016
[08:19] <Abe_> send a screen or something
[08:20] <rubiksmomo> Abe_, http://paste.ubuntu.com/16273386/
[08:20] <Abe_> hmmm that should switch the graphic's chips
[08:21] <Abe_> let me google
[08:21] <rubiksmomo> I've had major issues with nvidia for weeks already. =P
[08:23] <mr_sunshine> Hi all guys! I just updated to 16.04 and now I'm not able to set resolution for my display. In settings menu my display hangs in unknown state. I've AMD radeon HD5770 video chipset. My dmesg: http://paste.ubuntu.com/16273273/ and Xorg.log: http://paste.ubuntu.com/16273363/. I just checked here: https://help.ubuntu.com/community/RadeonDriver that my chipset is supported.
[08:23] <mr_sunshine> Any thoughts?
[08:23] <mr_sunshine> Any help would be really appreciable.
[08:24] <cfhowlett> !patience
[08:24] <Abe_> rubiksmomo: so you're using your intel 3d chip right now. which driver version are you running?
[08:24] <rubiksmomo> Abe_, I think it's using intel now. I have 364 now, but I've tried many versions.
[08:25] <Abe_> rubiksmomo: did you install the driver using the nvidia installer?
[08:25] <rubiksmomo> Abe_, no, APT.
[08:25] <rubiksmomo> Abe_, I ran "sudo update-alternatives" and chose 0 (auto mode). Seems to select nvidia now. Not sure if it will work. :o
[08:25] <Abe_> hmm found this https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1310023
[08:26] <Abe_> rubiksmomo: yes you need to log out and back in
[08:26] <rubiksmomo> Abe_, OK, I'll try. :S
[08:27] <Abe_> I have Prime to :/ still not perfect under linux. the Nvidia cards have always screen tearing. there just good for gaming
[08:27] <Abe_> o*
[08:28] <Wiz_KeeD> Hi guys, I want to install wkhtmltopdf 12.1.2 on ubuntu 16.04 but I'm missing libhpeg62-turbo which seems to be missing in this distro
[08:28] <Wiz_KeeD> Any idea what is the proper course of action?
[08:30] <rubiksmomo> I selected nvidia on prime settings. But when I relog intel is selected again. Why isn't nvidia working? :<
[08:31] <Abe_> Wiz_KeeD: I don't know what wkhtmltopdf supposed to be. but did try an sudo apt-get install wkhtmltopdf? if it's in the repos
[08:31] <Abe_> wkhtmltopdf - Command line utility to convert html to pdf using WebKit
[08:31] <Abe_> yes
[08:31] <Abe_> Wiz_KeeD: sudo  apt-get install wkhtmltopdf
[08:31] <Abe_> one space too much
[08:31] <Wiz_KeeD> Abe_, yes but I don't want the distro version it's buggy
[08:32] <Abe_> Wiz_KeeD: then you need the version you want and build from source I guess...
[08:33] <Abe_> Wiz_KeeD: maybe you find a .deb package somewhere
[08:33] <mr_sunshine> Guys. any chance that anyone heard any news about patches for AMD chipset in 16.04?
[08:33] <rubiksmomo> What's up with this? sudo: nvidia-xconfig: command not found
[08:34] <Abe_> rubiksmomo: idk...
[08:34] <Wiz_KeeD> Abe_, I did, I have it here but when installing it with dpgk it complains about that missing library
[08:34] <Wiz_KeeD> E: Package 'libjpeg62-turbo' has no installation candidate
[08:36] <Abe_> Wiz_KeeD: can you find it in synaptic package manager? they mostly have everything you might need
[08:37] <Abe_> Wiz_KeeD: especially dependency problems are easy to fix with synaptic in my experience
[08:38] <fablab01> EI
[08:38] <Abe_> who send me that PPA again?
[08:38] <Wiz_KeeD> Abe_, that's true, the thing is this .deb package contains multiple things and I need just wkhtmltopdf not wkhtmltox
[08:38] <fablab01> ITALIAN
[08:38] <fablab01> SUCK MY DICK
[08:39] <fablab01> CI sono ragazze?
[08:39] <Abe_> rubiksmomo: thanks for the PPA :-D
[08:39] <rubiksmomo> Abe_, you are welcome ^_^
[08:39] <ducasse> !ops | fablab01
[08:39] <Abe_> Now I have a hole bunch of driver's to choose from
[08:40] <rubiksmomo> ^_^
[08:41] <Abe_> I'm probably up all night working on my system now... just cuz of 16.04.. well I wanted it so badly.. it's my fault
[08:41] <rubiksmomo> Abe_, welcome to the club
[08:43] <Abe_> rubiksmomo: are you on 16.04... I'm not i'm building up my 14.04 system again
[08:43] <rubiksmomo> Abe_, 14.04.4 LTS 64bit
[08:43] <Abe_> rubiksmomo: yup did you also try 16.04 ?
[08:43] <rubiksmomo> Abe_, no, never. Should I? =P
[08:44] <Abe_> rubiksmomo: NO, don't deal with it
[08:44] <rubiksmomo> x)
[08:45] <Abe_> it's funny, they release 16.04 and didn't even fix all the bugs in 14.04
[08:45] <mr_sunshine> guys, could anyone tell me please how to find which driver for graphical chipset I'm currently using? amdgpu or radeon?
[08:45] <Abe_> mr_sunshine: lspci
[08:46] <Abe_> oh driver
[08:46] <k1l_> mr_sunshine: lspci -nnk | grep -i vga -A3 | grep 'in use'
[08:46] <mr_sunshine> I just see only this: 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770]
[08:47] <k1l_> mr_sunshine: and my command?
[08:47] <ducasse> Abe_: well, bugs are discoverd all the time, so there will still be new bugs in 14.04, and some bugs are lower priority than others.
[08:48] <mr_sunshine> k1l_: nothing
[08:48] <Abe_> ducasse: but why doesn't it happen with Windows ? they maybe have minor things
[08:48] <k1l_> mr_sunshine: "lspci -nnk | grep -i vga -A3 | nc termbin.com 9999" please show the url
[08:48] <Wiz_KeeD> Is it possible for one to install from a deb file just a certain package not all?
[08:49] <EriC^^> Wiz_KeeD: i dont think so
[08:49] <EriC^^> no
[08:49] <mr_sunshine> k1l_: http://termbin.com/dmmr
[08:49] <Abe_> Wiz_KeeD: that are probably dependenies
[08:49] <Wiz_KeeD> damn
[08:49] <k1l_> mr_sunshine: radeo.
[08:49] <EriC^^> Wiz_KeeD: why what are you trying to do?
[08:50] <ducasse> Abe_: there are still bugs being discovered and fixed in win7.
[08:50] <mr_sunshine> k1l_: yes! thanks for help! Is it possible to configure somehow resolution from console?
[08:50] <Wiz_KeeD> EriC^^, trying to install http://nightly.odoo.com/extra/wkhtmltox-0.12.1.2_linux-jessie-amd64.deb on Ubuntu 16.04
[08:50] <Abe_> ducasse: why can't they work on one distro until it's perfect? xD
[08:50] <rubiksmomo> What's up with this? sudo: nvidia-xconfig: command not found
[08:50] <Wiz_KeeD> It's a good working version and the latest wkthtmltopdf are buggy
[08:50] <Wiz_KeeD> and problematic
[08:51] <ducasse> Abe_: it will never be perfect :)
[08:51] <Wiz_KeeD> and installing via dpkg says the library libjpeg62-turbo is missing
[08:51] <Abe_> rubiksmomo: where does it show up?
[08:51] <Wiz_KeeD> I guess it's outdated or something
[08:51] <rubiksmomo> Abe_, When I try to execute it to create xorg.conf
[08:52] <Abe_> ducasse: Well but releasing a version that is very unstable is also not very good.. I know they are working like clockwork, and they release on a specific date but why?
[08:52] <MonkeyDust> Abe_  discussion and opinions in #ubuntu-offtopic
[08:53] <Wiz_KeeD> EriC^^, any advice?
[08:53] <Abe_> MonkeyDust: sorry
[08:53] <EriC^^> !info wkhtmltox
[08:53] <EriC^^> !info wkhtmltox trusty
[08:54] <EriC^^> Wiz_KeeD: which ubuntu are you using?
[08:54] <Wiz_KeeD> EriC^^, latest, 16.04
[08:54] <EriC^^> !find libjpeg62-turbo
[08:54]  * Abe_ need to restart
[08:54] <EriC^^> !info libjpeg62-turbo
[08:54] <EriC^^> !info libjpeg62-turbo trusty
[08:55] <EriC^^> Wiz_KeeD: hm maybe install that package?
[08:55] <Wiz_KeeD> EriC^^, but it does not exist :))
[08:55] <EriC^^> download it as the first one
[08:55] <MonkeyDust> !info wkhtmltopdf
[08:56] <Wiz_KeeD> as I said, it's a buggy version, only that cane be trusted for the particular framework I'm using
[08:56] <Wiz_KeeD> unexpected behavior
[08:56] <EriC^^> Wiz_KeeD: you got to download the .deb's yourself and satisfy the deps
[08:57] <Wiz_KeeD> yes, that's the problem, the dependencies
[08:57] <Wiz_KeeD> more specifically that library
[08:58] <EriC^^> google is your friend :)
[09:04] <rubiksmomo> Why does my xorg.conf get rename to xorg.conf.<date> and prime mode change back to intel on every login?
[09:05] <Dro> my "recent" is always changing without i open any file.. some file were accessed today and I didn't opened it.. what does that mean ? someone have access on my files?
[09:06] <mrasker> hello, i installed ubuntu 16.04 in my laptop and the battery life decreased from 6 hours with 14.04 to 4 hours with 16.04
[09:06] <mrasker> is there something i can do?
[09:06] <MonkeyDust> mrasker  there's something called TLP
[09:07] <mrasker> of course i installed tlp but it doesn't make so much
[09:07] <mrasker> i'm not sure if tlp does somthing with an ssd
[09:10] <Abe_> xD that nvidia driver didn't work, had to delete it in tty
[09:10] <MonkeyDust> !info laptop-mode-tools | mrasker
[09:10] <tcorneli> Hi, can anyone tell me how to reinstall mysql server such that I can set a new root password?
[09:11] <mihaijulien> can anyone here help me a bit with some newbie autopilot tests questions?
[09:13] <MonkeyDust> !info autopilot-desktop
[09:13] <MonkeyDust> mihaijulien  what's autopilot?
[09:14] <mr_sunshine> Guys could anyone suggest any channel or portal where I can try to get some help for my ubuntu 16.04 radeon problem?
[09:15] <MonkeyDust> mr_sunshine  start with describing the problem
[09:15] <mr_sunshine> MonkeyDust:  0 down vote favorite 	  I just recently updated to 16.04 and now I'm not able to set resolution for my display. In settings menu my display hangs in unknown state. I've AMD radeon HD5770 video chipset. My dmesg: http://paste.ubuntu.com/16273273/ . I just checked here: https://help.ubuntu.com/community/RadeonDriver that my chipset is supported.
[09:16] <mrasker> thank you, i'll try :)
[09:17] <mrasker> do you recommend me to try lptop-mode-tools with tlp?
[09:17] <rubiksmomo> Why does my xorg.conf get rename to xorg.conf.<date> and prime mode change back to intel on every login?
[09:18] <mr_sunshine> MonkeyDust: I just really want to set resolution to some normal values. And it would be okay for me. But i don't how:(
[09:19] <MonkeyDust> mr_sunshine  intel here ... in a terminal, type   xrandr
[09:19] <Gothjymz> mr_sunshine just install compiz and compiz config setting manager
[09:19] <Abe_> rubiksmomo: your PPA almost screwed up my system xD.. I fixed it in tty.. the recommended driver nvidia-364 doesn't work... tried the nvidia-361, that fixed it...puhh
[09:20] <rubiksmomo> Abe_, great ^_^
[09:20] <MonkeyDust> Abe_  rubiksmomo yes, careful with ppa's, try to avoid them as much as possible
[09:20] <mr_sunshine> MonkeyDust: http://paste.ubuntu.com/16274299/
[09:20] <mr_sunshine> Gothjymz: ok, will try it.
[09:21] <Abe_> rubiksmomo: MonkeyDust yea I'm still using one from the ppa... before I was only able to get the nvidia-352
[09:22] <mr_sunshine> Gothjymz: Could you please give me a point how to use it?
[09:23] <Abe_> rubiksmomo: it doesn't stay on nvidia after restart ?
[09:23] <Gothjymz> open compizconfig setting manager, search for display setting (guess in general option), change the output
[09:24] <rubiksmomo> Abe_, Nope. Renames my xorg.conf and resets to intel.
[09:24] <rajiv1> how do i see my modem details in ubuntu 16.04 lts? I am using "huawei powerfi e8231"
[09:24] <Gothjymz> mr_sunshine: change the output like : 1440x900+0+0, or set the overlapping output handling to smart mode
[09:25] <Abe_> rubiksmomo: hmm I google for you, hope i find anything useful... idk why it does that on yours
[09:25] <mr_sunshine> Gothjymz: How to apply them? Do I need to restart something&
[09:26] <Gothjymz> mr_sunshine: yep
[09:28] <Cedara> Anyone have a suggestion for me why Corebird has hiccups? Meaning, the window closes itself without error message?
[09:28] <Abe_> rubiksmomo: didn't you have this problem also?
[09:28] <Abe_> rubiksmomo: http://askubuntu.com/questions/450154/nvidia-331-nvidia-settings-prime-profile-switching-error
[09:28] <Cedara> I mean, where can I look?
[09:28] <Abe_> where it just shows blank
[09:29] <MonkeyDust> !info corebird
[09:29] <abhigenie92> hi guys
[09:30] <Abe_> hi abhigenie92
[09:30] <abhigenie92> i am getting this error http://paste.ubuntu.com/16274522/
[09:31] <abhigenie92> I have tried sudo apt-get install -f ;sudo apt-get autoremove;  sudo apt-get autoclean
[09:31] <rajiv1> Is /boot partition is needed during the installation of ubuntu-mate 16.04 lts?
[09:31] <abhigenie92> but still it persists. :/
[09:32] <abhigenie92> any suggestions folks?
[09:32] <Abe_> abhigenie92: seems like dependency problems
[09:32] <Jordan_U> rajiv1: No, you don't need a separate /boot/ partition. If you're installing for UEFI then you need an EFI System Partition, which is different. I would recommend just using automatic partitioning.
[09:33] <Abe_> go synaptic and search for libpython-dev
[09:33] <abhigenie92> I tried apt-get but this also gives error http://paste.ubuntu.com/16274586/
[09:33] <abhigenie92> Abe_: anyway to solve this http://paste.ubuntu.com/16274586/
[09:35] <Abe_> abhigenie92 yes I see
[09:35] <rubiksmomo> Abe_, Yeah, I had the blank error. After changing the driver or changing the alternatives, I no longer get the blank error.
[09:35] <Abe_> but It want's python-dev : Depends: libpython-dev (= 2.7.4-0ubuntu1) but it is not going to be installed
[09:35] <MonkeyDust> abhigenie92  put a short description of tht problem in your question, so we don't have to open al the links
[09:36] <abhigenie92> This is the question http://paste.ubuntu.com/16274586/ . The error is E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
[09:36] <abhigenie92> MonkeyDust: thanks for suggestion. Please check above :)
[09:36] <Abe_> abhigenie92: don't you have to install "Depends: libpython-dev" ?
[09:37] <rajiv1> jordan_U: i have installed ubuntu-mate 16.04 with the following partitions: /root/60gb, /home/100gb, /boot/1gb, /swap/4gb. Are these partitionsgood for installing ubuntu-mate 16.04?
[09:37] <EriC^^> abhigenie92: which ubuntu version are you using?
[09:37] <abhigenie92> Abe_: I found that the package wasn't available via pip. I wish to this issue only E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
[09:37] <mr_sunshine> Guys I just realize that somehow I lost after upgrade my max resolution available value. I mean I ran this: sudo hwinfo --framebuffer and got this: http://paste.ubuntu.com/16274650/. But I'm sure that I have used 1920x1080
[09:38] <Abe_> abhigenie92: seems those packages are not available
[09:38] <Jordan_U> rajiv1: I would recommend only having root and swap.
[09:38] <abhigenie92> EriC^^: Ubuntu 12.04.5 LTS
[09:38] <Abe_> abhigenie92: but idk :(
[09:39] <abhigenie92> Abe_: oh, anyway to fix this. Are you saying the devs of the package removed them from repo?
[09:39] <EriC^^> abhigenie92: why do you have a raring repo there?
[09:39] <Jordan_U> mr_sunshine: hwinfo --framebuffer only refers to VESA resolutions, not the resolutions you can achieve with native graphics drivers.
[09:39] <abhigenie92> EriC^^: where?
[09:39] <EriC^^> in your sources, old-releases .... /raring
[09:39] <abhigenie92> oh
[09:40] <Jordan_U> abhigenie92: Please pastebin your /etc/apt/sources.list as well as the contents of any files in /etc/apt/sources.list.d/ .
[09:40] <Abe_> abhigenie92: The following packages have unmet dependencies: Depends: libpython-dev "try finding the dependecies in Synaptic"
[09:40] <Abe_> install libpython-dev and do again
[09:41] <haris1> hi
[09:41] <mr_sunshine> Jordan_U: got it. I just have a black frame around my available place on display. I don't know how to change it:(
[09:41] <rubiksmomo> Why does my xorg.conf get renamed to xorg.conf.<date> and prime mode change back to intel on every login?
[09:42] <Abe_> abhigenie92: and to the other one seems like it's not there. shows error 501
[09:42] <Jordan_U> mr_sunshine: Please pastebin your /var/log/Xorg.0.log .
[09:43] <mr_sunshine> Jordan_U: Please see it here: http://paste.ubuntu.com/16274778/
[09:43] <rajiv1> jordan_U: thank you! I going to use only root and swap partitions from now on.
[09:43] <Abe_> maybe run apt-get update --fix-missing as suggested ?
[09:44] <abhigenie92> Jordan_U: http://paste.ubuntu.com/16274801/
[09:44] <Gothjymz> When you install/upgrade with apt-get upgrade or with apt-get install somepackage usually it tries to update dependencies. This means that maybe it finds that some packages need new or updated versions of existing packages, and so on in a cascade of dependencies. If some packages miss or fail the integrity check, it seems it suspends this package and wants you to go to handle the result following the handle method of the requiring package, if
[09:44] <Gothjymz> possible. Often it stops the installation of the package.
[09:44] <Wiz_KeeD> Hey guys I did sudo dpkg --unpack .deb. How do I revert this?
[09:45] <Abe_> rubiksmomo: :( no idea... i would recommend asking in a forum as well
[09:45] <abhigenie92> Abe_: I want to solve the other one only
[09:45] <rubiksmomo> Abe_, OK, I will
[09:45] <Jordan_U> abhigenie92: The contents of ia32-libs-raring.list ?
[09:45] <abhigenie92> Information: http://paste.ubuntu.com/16274586/ ,http://paste.ubuntu.com/16274801/
[09:46] <de-facto> Wiz_KeeD https://gist.github.com/shamil/3140558
[09:46] <abhigenie92> Jordan_U: $ cat ia32-libs-raring.list deb http://old-releases.ubuntu.com/ubuntu/ raring main restricted universe multiverse
[09:46] <haris1> hi guys i have installed ubuntu 16.04.  but when i tried to install nvidia. thera was getting error. i can't log in.
[09:47] <Abe_> abhigenie92: is the support of 12.04 still good ?
[09:47] <Wiz_KeeD> de-facto, I can use that to remove a unwated package yes?
[09:47] <abhigenie92> Abe_: no idea, I am using someone's computer.:p
[09:47] <mr_sunshine> Jordan_U: Any thoughts?
[09:47] <abhigenie92> any suggestions on issue. :)
[09:47] <Jordan_U> abhigenie92: That is your problem. Why do you have that? It's quite possible that just having that entry has irrevocably broken your installation.
[09:48] <Abe_> abhigenie92: are u using ubuntu only ?
[09:48] <de-facto> Wiz_KeeD not sure what you mean by that, i assumed you wanted to unpack, modify and repack a .deb file
[09:48] <Abe_> abhigenie92: should still be supported hmm.
[09:49] <Jordan_U> mr_sunshine: You have ATI hardware and nomodeset in your kernel parameters. fglrx is no longer available in 16.04, and "nomodeset" is preventing the Free driver from being loaded.
[09:49] <abhigenie92> Jordan_U: should I delete that entry as in file or file contents?
[09:49] <Jordan_U> mr_sunshine: Edit /etc/default/grub and remove "nomodeset" from the list of kernel parameters, then run "sudo update-grub" and reboot. You should get full resolution.
[09:49] <mr_sunshine> Jordan_U: but without nomodeset I see only black screen after grub
[09:50] <abhigenie92> Jordan_U: irrevocably scares me. :/
[09:50] <rajiv1> Am i needed some unallocated space in my hard drive to use virtualbox?
[09:50] <de-facto> Wiz_KeeD also you might want to repack as root, e.g. sudo dpkg-deb -b <dir> <new.deb>     if i remember correctly
[09:50] <Wiz_KeeD> de-facto, that's also very helpful
[09:51] <Wiz_KeeD> but I did unpack and it placed all the files in the respective folders
[09:51] <Wiz_KeeD> and now I have to delete them manually?
[09:51] <Jordan_U> abhigenie92: 13.04 has newer package versions than 12.04. If at any point you recieved and installed updates while that entry was working it would have upgraded many but not all of your packages, leaving you with a system that is part 12.04 part 13.04 and all broken.
[09:52] <mr_sunshine> Jordan_U: Any chance that I can fix it somehow?
[09:52] <de-facto> Wiz_KeeD hmmm if they are in the exact locations the package itself would install them, maybe you can force a package install over them and then uninstall the package? not sure i never did that. why did you do it in first place manually?
[09:53] <Jordan_U> mr_sunshine: If such an accidental partial upgrade did occur, then you would need to re-install. If not, then you can just delete that file or comment out the entry. Again though, do you have any idea why it's there in the first place?
[09:53] <de-facto> ah and afaik its usefull to do all the unpack, modify and repack as root because then permissions wont get messed up
[09:53] <abhigenie92> Jordan_U: any way to fix this. I just to install python-xlib
[09:54] <de-facto> owenership even
[09:54] <Jordan_U> abhigenie92: If such an accidental partial upgrade did occur, then you would need to re-install. If not, then you can just delete that file or comment out the entry. Again though, do you have any idea why it's there in the first place?
[09:54] <Jordan_U> mr_sunshine: Ignore my last message to you :)
[09:55] <de-facto> Wiz_KeeD id never spread files manually because you loose track of them if the package manager does not know about their places (e.g. for updates or uninstall), hence i also refuse to run "sudo make install"
[09:55] <Codfection> Guys when I run apt get update I get this error
[09:55] <Codfection> 3B068FB4789ABE4AEFA3BB491397BC53640DB551 uses weak digest algorithm (SH
[09:55] <Codfection> key error
[09:55] <de-facto> yes SHA1 is deprecated
[09:56] <Codfection> so what to do
[09:56] <Codfection> how to fix it
[09:56] <mr_sunshine> Jordan_U: Thank you for helping! So, any chance that I can somehow fix nomodeset behavior?
[09:56] <Codfection> W: http://dl.google.com/linux/chrome/deb/dists/stable/Release.gpg: Signature by key 4CCA1EAF950CEE4AB83976DCA040830F7FAC5991 uses weak digest algorithm
[09:57] <Codfection> this error while updating .. how to fix?
[09:57] <de-facto> Codfection contact the repo maintainers about this and tell them to upgrade to a secure digest algo. this is very common problem btw https://wiki.debian.org/Teams/Apt/Sha1Removal
[09:57] <Codfection> I am a new user on ubuntu and have no idea how to fix it.. how to contact?
[09:57] <v4rp1ng> why does mkfs.ext4 format my drive without the 64bit option? i've got a 64bit OS and in /etc/mkefs.conf auto_64-bit_support = 1 is enabled. now I've got the Problem that resize2fs can't grow my FS.
[09:57] <Codfection> :(
[09:58] <de-facto> Codfection its a problem of google repo maintainers, chrome is not supported in ubuntu (rather use chromium and pepperflash from the official ubuntu repos ;-)
[09:58] <Wiz_KeeD> I have no idea what I did, wkhtmltopdf: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No such file or directory
[09:58] <Wiz_KeeD> de-facto, that was my mistake in doing that
[09:59] <Wiz_KeeD> I assume I have to manually remove the files by looking at the extracted deb
[09:59] <abhigenie92> Jordan_U: I think upgrade did not occur. Which is a better option deleting the file or removing the entry?
[09:59] <caribmale> Hello all this is my first time here  and am kinda new to Ubuntu am trying to install Metasploit on ubuntu 14.04 i dowloaded the installer and i already have my key but i don't know what to do or how to install it i would be most greatful for any help on this thanks.
[10:00] <de-facto> Wiz_KeeD if you open the deb in gdebi or such to see the files list or use "dpkg -c package_file.deb"
[10:00] <Jordan_U> v4rp1ng: The architecture in use, 32 vs 64 bit CPU, has nothing to do with the -O 64bit option of mkfs.ext4.
[10:01] <Jordan_U> v4rp1ng: You want to make your filesystem larger than 16 TiB?
[10:01] <v4rp1ng> Jordan_U, yes.
[10:01] <v4rp1ng> tune2fs -l shows no 64bit flag
[10:02] <BluesKaj> Hey all
[10:02] <de-facto> Codfection  chromium-browser and pepperflashplugin-nonfree to be exact
[10:02] <ubuntu870> hi bro
[10:02] <abhigenie92> Jordan_U: I commented out that entry. Tried again and got this error http://paste.ubuntu.com/16275194/
[10:03] <abhigenie92> these are the sources http://paste.ubuntu.com/16274801/
[10:03] <Jordan_U> v4rp1ng: You have multiple not great options. 1: Split your installation into separate partitions, putting some data in one fileystem and some in another. 2: Copy your data off elsewhere and re-create your filesystem with -O 64bit 3: Convert in place from ext4 to btrfs (which is still an *experimental* filesystem) and then resize to whatever size you want.
[10:03] <de-facto> Codfection you need universe and multiverse enabled for those (id recommend to use synaptic to manage package installs)
[10:03] <tylnesh> Hello. Anybody knows of a good software for teaching and explaining code?
[10:04] <ubuntu870> code.org
[10:04] <mr_sunshine> Jordan_U: Seems that I've found similar issue here: http://askubuntu.com/questions/761149/how-to-set-display-resolution-while-having-to-use-nomodeset-on-boot
[10:04] <caribmale> Is anyone seeing my messages just asking to make sure it is going through
[10:04] <tylnesh> @caribmale Yes
[10:04] <caribmale> thanks
[10:04] <Jordan_U> abhigenie92: Please pastebin the output of "sudo apt-get update".
[10:05] <caribmale> Did you see my original post ?
[10:05] <tylnesh> I have this piece of code, that I need to explain to some newbies.
[10:05] <tylnesh> I'd like to highlight interesting lines, color code it etc.
[10:05] <MonkeyDust> tylnesh  what coding language? try the appropriate channel
[10:05] <abhigenie92> Jordan_U:  Please check here http://paste.ubuntu.com/16275264/
[10:05] <tylnesh> Just simple javascript.
[10:06] <v4rp1ng> Jordan_U: well thanks. I thought it would be a lot of work.. Why isn't it enabled automatically when creating a ext4 FS?
[10:06] <MonkeyDust> tylnesh  this is ubuntu support, try a javascript channel
[10:06] <Jordan_U> v4rp1ng: Likely because of the lack of backwards compatability with older kernels.
[10:07] <MonkeyDust> tylnesh  1200+ people in ##javascript
[10:07] <abhigenie92> Reposting question to avoid confusion due to links: I stuck at this issue paste.ubuntu.com/16275194 Here are my sources paste.ubuntu.com/16274801 Here's the output of sudo apt-get update paste.ubuntu.com/16275264
[10:07] <tylnesh> I don't need an IDE, all I want is a decent, easy to use text editor able to show notes and comments
[10:07] <Jordan_U> abhigenie92: Try changing to a different apt mirror.
[10:08] <abhigenie92> Jordan_U: I didn't understand , can you explain more please
[10:08] <tylnesh> And the language shouldn't matter. Nevermind. I'll do it manually.
[10:08] <Jordan_U> abhigenie92: Unfortunately no, I need to leave now.
[10:09] <Codfection> guys I am getting the following error while sudo apt update
[10:09] <Codfection> W: http://dl.google.com/linux/chrome/deb/dists/stable/Release.gpg: Signature by key 3B068FB4789ABE4AEFA3BB491397BC53640DB551 uses weak digest algorithm (SHA1)
[10:09] <Codfection> any idea how to fix this?
[10:09] <Jordan_U> Codfection: Ask Google to fix their repository.
[10:10] <abhigenie92> Jordan_U: ohk, I unsure about the mirror thing. I am behind a proxy.
[10:10] <Codfection> Jordan_U, should I worry about that or continue using chrome for now?
[10:10] <Jordan_U> Codfection: What version of Ubuntu are you using?
[10:10] <Codfection> 16.04
[10:11] <caribmale> Am trying to run  Metasploit on ubuntu 14.04 i have downloaded the installer i already have my license but i do't know or not sure to install it can someone help please
[10:11] <Codfection> u have to use kali linux for it caribmale
[10:12] <Codfection> so Jordan_U ??
[10:13] <thirdwhl> All, in upstart how can you set up a program to run under a tty you can Alt+Fn to see?  It's easy to do under sysvinit by editing the /etc/inittab but I don't see how to do this in upstart
[10:13] <abhigenie92> I can't understand the issue. :/
[10:13] <caribmale> i tried that but when i do an upgrade for kali after running for a while i get a whit square at the bottom left of the terminal with 14 % and nothing esle happens
[10:14] <caribmale> it has happen 3 times  and have no idea
[10:14] <Codfection> caribmale, why u using ubuntu for metasploit?
[10:15] <caribmale> was just tring to see if it would work
[10:15] <caribmale> am fed up with  windows 7
[10:15] <Codfection> haha
[10:15] <Codfection> dont you find linux difficult for the applications support
[10:15] <Codfection> that windows offer?
[10:16] <caribmale> i know a bit about about ubuntu  and i like
[10:16] <caribmale> it
[10:17] <caribmale> i want to run kali in virtualbox with ubuntu as the host
[10:17] <Codfection> yea u can do that
[10:17] <Codfection> :)
[10:17] <caribmale> if i can get the kali upgrade probles solved
[10:17] <Codfection> whats ur laptop config. for running vm
[10:17] <Codfection> you need to check your repos and connection
[10:17] <abhigenie92> Hi guys!
[10:17] <abhigenie92> I stuck at this issue paste.ubuntu.com/16275194 Here are my sources paste.ubuntu.com/16274801 Here's the output of sudo apt-get update paste.ubuntu.com/16275264
[10:18] <abhigenie92> Can you tell how I can switch the mirror and if that is the problem.  Please also note I am behind a institute proxy.
[10:19] <rubiksmomo> Why does my xorg.conf get renamed to xorg.conf.<date> and prime mode change back to intel on every login? http://ubuntuforums.org/showthread.php?t=2323687
[10:19] <caribmale> windows 7 64 bit 4gigs of ram 250 gig hdd amd processor
[10:20] <caribmale> i have the same problem if i run kali on vm or do a dual boot
[10:21] <Codfection> caribmale, where are you from?
[10:21] <Codfection> I would suggest you a shop where you can get adapter
[10:21] <caribmale> The caribbean
[10:21] <Codfection> alfa wireless adapter
[10:24] <Codfection> linus torvalds or richard stallman
[10:24] <Codfection> who would you support?
[10:24] <caribmale> why do i get the white square at the bottom left hand corner of my terminal window after kali has been upgrading for a while
[10:25] <caribmale> how would i correct that
[10:25] <abhigenie92> Guys I have posted a formal question here http://askubuntu.com/questions/768853/e-unable-to-fetch-some-archives-maybe-run-apt-get-update-or-try-with-fix-mis
[10:29] <caribmale> Am gonna have to find my answer some place else take care all
[10:40] <rubiksmomo> Why does my xorg.conf get renamed to xorg.conf.<date> and prime mode change back to intel on every login? http://ubuntuforums.org/showthread.php?t=2323687
[10:43] <FredTheNoob> Hi there, I'm using Ubuntu 16.04... Is there any way to move this btns: close, minimize & maximize to the right side... thks
[10:44] <Seveas> yes, there is
[10:44] <rubiksmomo> FredTheNoob, I searched for you: http://askubuntu.com/questions/174292/how-can-i-move-all-the-window-controls-to-the-right-or-left
[10:45] <FredTheNoob> I did it too
[10:45] <FredTheNoob> but not success
[10:45] <FredTheNoob> ths
[10:46] <FredTheNoob> with configurator editor, but everything is different
[10:47] <FredTheNoob> I've suppose that u know a different way..
[10:47] <daviesmq> google.com
[10:47] <FredTheNoob> lolol
[10:47] <MonkeyDust> FredTheNoob  maybe with !ccsm or with unity-tweak
[10:48] <FredTheNoob> yup had installed unity-tweak too
[10:48] <MonkeyDust> FredTheNoob  or gnome-tweak
[10:48] <caribmale> why do i get a white square at the bottom left of the terminal window after doing an upgrade to kali
[10:49] <FredTheNoob> I'll keep trying thks
[10:49] <MonkeyDust> caribmale  ask the kali people, it's a different distro
[10:49] <caribmale> ok thanks
[10:51] <fluxy> I may have gone full retard here, but I've just installed ubuntu-mate for the first time and when I press shift+2 it should be an @ symbol, but that has been swapped with shift+', anyone know why?
[10:53] <Seveas> fluxy: looks like you got the wrong keyboard layout configured. I don't know mate so, I don't know where they hide that setting. Try finding keyboard settings and changing the layout.
[10:53] <MonkeyDust> fluxy  i use mate 16.04, works like a charm
[10:54] <fluxy> Seveas: Yeah I figured I accidentally picked the wrong one, but don't know where to find it to change it :P
[10:58] <de-facto> fluxy maybe in system settings region and language?
[10:58] <fluxy> yes, figured it out used "setxkbmap us" in terminal and switched it to US.
[10:59] <de-facto> not sure if that persists
[10:59] <rubiksmomo> Why does my xorg.conf get renamed to xorg.conf.<date> and prime mode change back to intel on every login? http://ubuntuforums.org/showthread.php?t=2323687
[11:00] <ava_sinlaire> fluxy you can issue dpkg-reconfigure keyboard-layout if you want persistence
[11:01] <fluxy> de-facto: just to be safe I went into System > Preferences > Personal > Language Support and set my language and layout system wide.
[11:02] <de-facto> yeah im not used to mate, but that sounds about right i guess. on a tty you also can do     "sudo  dpkg-reconfigure keyboard-configuration" but i guess your option there to set it sytemwide is better
[11:03] <fluxy> yeah I tried that first but it didn't seem to take, gave me some error i don't remember now
[11:04] <Abe_> it takes such a long time to configure qtcurve
[11:06] <ava_sinlaire> keyboard-configuration it was , sorry hope you are fine now; greetings
[11:08] <de-facto> btw i never understood why such a setting is not under "keyboard" in system settings on gnome
[11:08] <de-facto> at least there i would look first
[11:11] <ava_sinlaire> I once had a problem with keyboard layout, too. Logitech wireless Keyboard and on reboot it kept changing layout to US. If you have a complex password it can be a mess. In Keyboard seetings on xfce i added german layout and deleted the US layout systemwide as you said that did the trick. I don't use gnome anymore.
[11:13] <ava_sinlaire> using awesome at the moment i love it
[11:13] <harold-wran> anyone else here ?
[11:14] <auronandace> harold-wran: plenty
[11:14] <rubiksmomo> harold-wran, 1818 users on this channel
[11:14] <harold-wran> i see
[11:14] <harold-wran> im new here
[11:15] <MonkeyDust> harold-wran  type /topic
[11:15] <harold-wran> dunno
[11:15] <Ascavasaion> I have an ASUS T100TA tablet with a keyboard it docks into.  It comes preinstalled with windows 8, and I wanted to try a Live Boot of Ubuntu as I saw on http://www.jfwhome.com/2016/01/04/latest-steps-to-install-ubuntu-on-the-asus-t100ta/ that it seems to be able to run it with only suspend/resume, and bluetooth being tricky, both of which I can do without.  I have managed to get into the tablet's CMO
[11:15] <Ascavasaion> S and tried to change the boot order to boot the USB (built into the keyboard), by firstly disabling the Secure Boot option, and then I move to Boot options and there is no list of devices like hard disk, USB, etc.  Only a Windows option (in the CMOS???).  Please can someone explain or help?
[11:19] <andgra> ~$ man fg
[11:19] <andgra> man: can't set the locale; make sure $LC_* and $LANG are correct
[11:19] <andgra> No manual entry for fg
[11:19] <andgra> how do I fix this?
[11:20] <rubiksmomo> Why does my xorg.conf get renamed to xorg.conf.<date> and prime mode change back to intel on every login? http://ubuntuforums.org/showthread.php?t=2323687
[11:20] <MonkeyDust> andgra  fg means foreground and brings processes back ... what do you want to do or achieve?
[11:20] <andgra> i want the man page to work
[11:21] <MonkeyDust> andgra  manpage of what? are you sure there is one?
[11:21] <MonkeyDust> andgra  fg has no lan poage
[11:21] <MonkeyDust> andgra  fg has no man page
[11:21] <andgra> why?
[11:22] <MonkeyDust> andgra  no need for one, i guess ... when you run a command and hit ctrl-z, you can bring it back with fg
[11:22] <andgra> i just wanted to know if there was any way to determine what process to bring back if i have multiple
[11:22] <MonkeyDust> andgra  with 'jobs'
[11:23] <Abe_> rubiksmomo: do you really think it depends on the kernel?
[11:23] <andgra> that one doesn't have a man page either
[11:24] <andgra> is it a shell built in?
[11:24] <Abe_> I would really like to help out, but I don't know that much either
[11:24] <MonkeyDust> andgra  because there is no other syntax and has no options
[11:24] <MonkeyDust> andgra  yes, it's built in
[11:24] <rubiksmomo> Abe_, Yes, I got different results with different kernels.
[11:25] <andgra> I found the documentation in the documentation of my shell
[11:26] <iulian> rubiksmomo, have you looked there http://www.ubuntututorials.com/location-xorg-conf-ubuntu/
[11:26] <MonkeyDust> andgra  great ... 'jobs' for multiple suspended processes ... fg to bring them to the foreground
[11:26] <rubiksmomo> iulian, no :o
[11:28] <ducasse> andgra: doc for shell builtins is also available through 'help'
[11:28] <Abe_> rubiksmomo: try the nvidia-352, I think this one works good with prime... i was using this driver for a year or so. I also have prime
[11:28] <Abe_> this guy has the same nvidia http://askubuntu.com/questions/658040/ubuntu-14-04-nvidia-drivers-for-geforce-gtx-960m
[11:28] <MonkeyDust> andgra  what ducasse says: try    help fg
[11:29] <andgra> thanks, that was what i was looking for
[11:29] <HomeSchoolDad> Good morning - can anyone help me install epson wf-3640 drivers?
[11:30] <Abe_> rubiksmomo: try like that "sudo apt-get install nvidia-352 nvidia-prime"... might not be the newest one but it works good with prime
[11:30] <iulian> rubiksmomo, probably you have to move this file to /usr/share/X11/xorg.conf.d
[11:30] <rubiksmomo> iulian, Which file?
[11:31] <HomeSchoolDad> Good morning - can anyone help me install epson wf-3640 drivers?  I've tried several times and I keep getting errors.
[11:32] <ducasse> andgra: 'help' docs are actually rather good, it also covers things like 'test', 'for', 'while' etc.
[11:32] <iulian> rubiksmomo this one wich is being renamed at every boot with mmyydd
[11:33] <rubiksmomo> iulian, OK, I'll try :o
[11:33] <Abe_> rubiksmomo: good luck
[11:33] <rubiksmomo> thanks, I'll need it =D
[11:33] <andgra> inception: help help :D
[11:34] <HomeSchoolDad> Good morning - can anyone help me install epson wf-3640 drivers?  I've tried several times and I keep getting errors.  I've tried both terminal and app center.  Please help.
[11:35] <ducasse> HomeSchoolDad: we can't help you unless you pastebin the errors and give us the link.
[11:35] <HomeSchoolDad> OK - noob here - can you give me that command?
[11:36] <ducasse> HomeSchoolDad: 'apt install pastebinit' first.
[11:38] <HomeSchoolDad> @ducasse i keep getting this : N: Ignoring file 'getdeb.list.bck' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension N: Ignoring file 'getdeb.list.bck' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
[11:38] <HomeSchoolDad> @ Ducasse i used sudo apt-get pastebinit
[11:39] <ducasse> HomeSchoolDad: 'sudo rm /etc/apt/sources.list.d/getdeb.list.bck', then 'sudo apt-get -f install'
[11:39] <HomeSchoolDad> @ Ducasse i used sudo apt-get install pastebinit
[11:39] <HomeSchoolDad> @ Ducasse trying now
[11:41] <HomeSchoolDad> @ Ducasse done
[11:41] <ducasse> HomeSchoolDad: now try to install the driver you wanted.
[11:42] <MonkeyDust> HomeSchoolDad  no need forthe @ ... type hom and then hit tab to autocomplete
[11:44] <HomeSchoolDad> ducasse: trying now
[11:45] <HomeSchoolDad> ducasse: i get this in software center : (Reading database ... 207354 files and directories currently installed.) Preparing to unpack .../epson-inkjet-printer-escpr_1.6.5-1lsb3.2_i386 (1).deb ... Unpacking epson-inkjet-printer-escpr (1.6.5-1lsb3.2) ... dpkg: dependency problems prevent configuration of epson-inkjet-printer-escpr:  epson-inkjet-printer-escpr depends on lsb (>= 3.2).  dpkg: error processing package epson-inkjet-p
[11:46] <HomeSchoolDad> ducasse: i have installed lsb
[11:48] <ducasse> HomeSchoolDad: yes, known problem. open a terminal, go to the directory where you have the package, then type 'sudo apt install ./epson-inkjet-whatever.deb' - use tab to get the filename right.
[11:49] <HomeSchoolDad> ducasse: got it - trying now
[11:51] <HomeSchoolDad> ducasse: i get this: E: Unable to locate package epson-inkjet-printer-escpr_1.6.5-1lsb3.2_ E: Couldn't find any package by regex 'epson-inkjet-printer-escpr_1.6.5-1lsb3.2_'
[11:52] <HomeSchoolDad> ducasse: sudo apt install epson-inkjet-printer-escpr_1.6.5-1lsb3.2_
[11:53] <HomeSchoolDad> ducasse: i may see the problem - hangon
[11:53] <HomeSchoolDad> hang on
[11:53] <ducasse> HomeSchoolDad: 'make sure to put in the ./ immediately before the filename.
[11:53] <HomeSchoolDad> ducasse: ok
[11:54] <eugenio_> hello, I've finally decided to fully move on ubuntu
[11:54] <MonkeyDust> eugenio_  great
[11:54] <eugenio_> i'd like to optimize my laptop
[11:54] <ducasse> eugenio_: optimize how?
[11:54] <eugenio_> i asked a friend but ultimately he invite me here
[11:55] <HomeSchoolDad> ducasse: i'm getting a lot of e: Release _____ not found
[11:55] <eugenio_> for instance i know that dsmeg give me some error about power management, usbhid and networks
[11:55] <MonkeyDust> eugenio_  install preload
[11:55] <eugenio_> ok jut a sec
[11:56] <HomeSchoolDad> ducasse: sudo apt install ./epson-inkjet-printer-escpr_1.6.5-1lsb3.2_i386.deb
[11:56] <ducasse> HomeSchoolDad: ok, I need to see exactly what happens; 'apt install pastebinit'
[11:56] <ducasse> HomeSchoolDad: 'sudo apt install pastebinit', sorry.
[11:57] <eugenio_> back again sorry
[11:57] <ducasse> HomeSchoolDad: then 'sudo apt install ./epson-inkjet-printer-escpr_1.6.5-1lsb3.2_i386.deb | pastebinit'
[11:57] <MonkeyDust> eugenio_  open a terminal window and paste this ... sudo sed -i s/PRELINKING\=unknown/PRELINKING\=yes/g /etc/default/prelink; sudo /etc/cron.daily/prelink
[11:57] <eugenio_> preload installed
[11:58] <HomeSchoolDad> ducasse: lindsey@lindsey-Satellite-C55-B:~/Downloads$ sudo apt install pastebinit Reading package lists... Done Building dependency tree        Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies:  epson-inkjet-printer-escpr:i386 : Depends: lsb:i386 (>= 3.2) but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no 
[11:58] <MonkeyDust> eugenio_  that's one line
[11:58] <ducasse> HomeSchoolDad: ok, 'sudo apt-get -f install'
[11:59] <eugenio_> sed: can't read /etc/default/prelink: No such file or directory
[11:59] <eugenio_> sudo: /etc/cron.daily/prelink: command not found
[11:59] <HomeSchoolDad> ducasse: sudo apt-get -f install pastebinit  ?
[11:59] <ducasse> HomeSchoolDad: no, just what I typed.
[12:00] <HomeSchoolDad> ducasse: ok - done
[12:00] <eugenio_> sed: can't read /etc/default/prelink: No such file or directory
[12:00] <eugenio_> sudo: /etc/cron.daily/prelink: command not found
[12:00] <eugenio_> i receive this
[12:00] <ducasse> HomeSchoolDad: did it finish ok?
[12:00] <HomeSchoolDad> ducasse: yes
[12:00] <HomeSchoolDad> ducasse: it removed epson
[12:01] <ducasse> HomeSchoolDad: then the driver should be installed, try to configure your printer and it should find it.
[12:01] <ducasse> HomeSchoolDad: it removed epson - why?
[12:01] <HomeSchoolDad> ducasse: trying
[12:01] <eugenio_> oh prelink was not installed
[12:01] <eugenio_> now it's running something
[12:02] <MonkeyDust> eugenio_  great, you're learning
[12:02] <eugenio_> cool!
[12:02] <eugenio_> so it's running something
[12:02] <MonkeyDust> !manual | eugenio_
[12:02] <eugenio_> but getting no output
[12:02] <ducasse> HomeSchoolDad: it won't work if it removed the package. are you sure this package is compatible with your version of ubuntu?
[12:03] <eugenio_> thank you for the manual tip
[12:03] <HomeSchoolDad> ducasse: i found it on epson website.  under ubuntu
[12:03] <eugenio_> what's this:  [    0.140445] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[12:03] <eugenio_> ?
[12:04] <ducasse> HomeSchoolDad: which ubuntu version is this - 16.04, I assume?
[12:04] <HomeSchoolDad> ducasse: 14.04
[12:04] <HomeSchoolDad> ducasse: i think you got it!!!!!!
[12:05] <MonkeyDust> HomeSchoolDad  works?
[12:05] <HomeSchoolDad> ducasse: i just got the test page off the printer - it's a little light but it works.
[12:05] <MonkeyDust> !cookie | ducasse
[12:05] <ducasse> HomeSchoolDad: ok, good :) you can fine-tune colors in settings :)
[12:06]  * ducasse eats a cookie :)
[12:06] <denali> Is there a way to remove brltty without removing ubuntu-mate-core and ubuntu-mate-desktop?
[12:06] <rubiksmomo> Booted 4.5.3 kernel and logged in. Got 864x486 resolution and no other resolutions are available. From Nvidia settings I could see that it has changed back to Intel. http://ubuntuforums.org/showthread.php?t=2323687
[12:06] <HomeSchoolDad> ducasse: I'd be happy to use pastebinit.  any idea why that's not working?
[12:07] <ducasse> HomeSchoolDad: your apt database should be consistent now, so try to install it if you want.
[12:07] <HomeSchoolDad> ducasse: sudo apt intall pastebinit  ?
[12:08] <ducasse> HomeSchoolDad: on 14.04 you should probably use apt-get instead of just apt, I haven't really tested that version of it.
[12:09] <HomeSchoolDad> ducasse: sudo apt-get intall pastebinit  got it!
[12:10] <ducasse> HomeSchoolDad: there's another program you might want: gdebi - install that, then when you want to install a package later just right click it and choose 'install with gdebi'
[12:10] <anoop16051981_> hello guys, I came up with a new way of representing IPv6 addresses , http://techistan.blogspot.in/2016/05/anoops-method-representing-ipv6.html
[12:10] <ducasse> HomeSchoolDad: that will give you a nice graphical interface that sorts out dependencies for you :)
[12:10] <HomeSchoolDad> ducasse: trying now!
[12:11] <HomeSchoolDad> ducasse: thanks - I'm pretty new to this stuff.
[12:12] <ducasse> HomeSchoolDad: you're very welcome, I hope gdebi will make things easier for you next time you want to install something you have downloaded.
[12:12] <HomeSchoolDad> ducasse: me too!!!!
[12:13] <HomeSchoolDad> ducasse: i really appreciate the help.  thanks!
[12:13] <ducasse> HomeSchoolDad: no problem :)
[12:13] <Johnny_Linux> homeschooldads are cool
[12:14] <denali> Is there a way to remove brltty without removing ubuntu-mate-core and ubuntu-mate-desktop?
[12:14] <ducasse> denali: aren't those packages just metapackages?
[12:15] <denali> I'm not sure?
[12:15] <jelly> after a power loss on 16.04 laptop I lost unity menu, panel and key bindings.  Reenabling unity plugin in ccsm fixed the first two.  How do I reenable my custom keybidings that use Ctrl-Alt-cursors to switch between workspaces?  They're visible in unity-control-center -> Keyboard -> Shortcuts -> Navigation -> Switch to Workspace Left etc, but just don't work
[12:15] <skinux> What is the command to go through ProFTPd configuration again?
[12:16] <ducasse> denali: they are on 16.04, shouldn't matter if you remove them.
[12:17] <jelly> xev shows the keypresses for Ctrl_L, Alt_L and Left, Right etc as expected
[12:17] <ducasse> skinux: 'sudo dpkg-reconfigure proftpd' ?
[12:17] <denali> ducasse: So if I'm reading you right, removing the two ubuntu-mate-* packages won't gut my system, yes?
[12:19] <ducasse> denali: those two packages are essentialy empty. if it wants to remove something you don't want it to remove, just use 'sudo apt-mark manual packagename' to mark it as manually installed.
[12:20] <NicoHood> I used luks and lvm to encrypt my ubuntu installation. I switched to a bigger ssd (with dd). Now i want to enlarge the luks. However I am unable to reside /dev/sda5 with fdisk, as it will use a wrong alignment. How can i resize the partition?
[12:21] <denali> ducasse: It says they were already set to manually installed.
[12:21] <eugenio_> hello, i apparently made prelink and preload working
[12:21] <ducasse> denali: I just removed the corresponding xubuntu package on my system, it doesn't want to remove anything else.
[12:22] <eugenio_> now i'd like to fix this fail: [    0.140460] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[12:22] <eugenio_> any help?
[12:22] <eugenio_> I understand that is something related to power management
[12:22] <denali> ducasse: o.O MATE shouldn't be different...
[12:22] <ducasse> denali: that was my point :)
[12:23] <rubiksmomo> When I install/purge drivers. Why does it only mention the newest kernel? "update-initramfs: Generating /boot/initrd.img-4.6.0-040600rc2-generic"
[12:25] <denali> ducasse: http://pastebin.ubuntu.com/16277789/
[12:26] <ducasse> denali: you didn't need to apt-mark that, you only do that with packages apt is trying to remove that you want it to keep. go ahead, it should be fine.
[12:26] <MonkeyDust> rubiksmomo  stop asking 'why' whenever you encounter something, in this channel, better ask 'how'
[12:27] <skinux> Anyone have ProFTPd setup?
[12:27] <rubiksmomo> MonkeyDust, Right
[12:27] <skinux> I just installed it, configured for localhost, created a new user, but can't connect.
[12:28] <r_rios> Hello, all. What layout can I set to be able to type cedille in an US keyboard? I tried US international, but ' + c types out ć
[12:29] <rubiksmomo> When I install an nvidia driver, will it work with all kernels? It only mentions the newest kernel while installing: "update-initramfs: Generating /boot/initrd.img-4.6.0-040600rc2-generic".
[12:29] <callipygous> I'm having trouble getting a game to run, wondering if it's my video drivers.
[12:30] <callipygous> Is Gallium open source?
[12:30] <ducasse> r_rios: configure a key as a Compose key
[12:30] <ducasse> r_rios: I use caps lock.
[12:30] <am_> hi there
[12:31] <am_> very strange problem, after upgrading to Ubuntu 16.04 my VLC shows video files with artefacts...
[12:31] <am_> I was tried to remove gstreamer-1.0.-bad иге тщерштп рфззуты
[12:31] <am_> but nothing happens
[12:31] <am_> video shows still buggy
[12:31] <denali> ducasse: It did it and nothing went poof.  Thank you!
[12:32] <am_> How can I solve this problem? And maybe someone allready solve the same?
[12:32] <danielstnv>  /SET use_msgs_window ON
[12:33] <twelveheaded> So, new 16.04 is fucking gay. Can i get binaries for Radeon installed other way?
[12:33] <MonkeyDust> twelveheaded  no profanities here
[12:33] <twelveheaded> MonkeyDust: yeah, yeah, get to the point
[12:34] <MonkeyDust> twelveheaded  tone it down, what brings you here
[12:34] <twelveheaded> Oh, binaries are a profanity in Ubuntu irc?
[12:34] <eugenio_> what's your problem with gay people?
[12:34] <twelveheaded> I dont have problems with fgts, but they are a good insult generally.
[12:34] <MonkeyDust> twelveheaded  stop
[12:34] <twelveheaded> My problem is with binaries, how can i install them.
[12:34] <eugenio_> can someone kick off this troglodite?
[12:35] <am_> Somebody knows about this problem with buggy video stream displaying on ubuntu?
[12:35] <eugenio_> *out
[12:35] <callipygous> so glxinfo says I have Gallium 0.4 on AMD KABINI.  Is there a closed source binary I can install ?
[12:35] <twelveheaded> am_: its because Ubuntu forced OSS drivers, got same problems with firefox.
[12:35] <k1l_> twelveheaded: amd stopped making fglrx. so there will be no fglrx since 16.04
[12:35] <am_> twelveheaded, my firefox was bugged too, but i disable GFX render and all ok
[12:36] <am_> twelveheaded, and how can I solve this problem?
[12:36] <twelveheaded> am_: i love killing a patient to cure him.
[12:36] <k1l_> twelveheaded: and there is no need to rant about ubuntu. the same issue will be on every new linux distribution that will be released this year.
[12:36] <eugenio_> good to know that this channel is homophobic
[12:37] <r_rios> ducasse: You mean using Caps Lock + c to type the cedille?
[12:37] <twelveheaded> k1l_: yeah, no, todays cards will be up-to-date for another 2 years minimum, so i can have old fglrx doing what i want it to do.
[12:37] <eugenio_> * or at least that it allows homophobic people
[12:37] <am_> eugenio_, be calm
[12:37] <twelveheaded> Im looking for source on amd stopping fglrx.
[12:37] <eugenio_> i'm tired of people judging us
[12:37] <ducasse> r_rios: no, if you configure caps lock as a compose key, you can use it to type unusual characters
[12:38] <MonkeyDust> eugenio_  you too, stop
[12:38] <curlyears> greets
[12:38] <k1l_> twelveheaded: no. amd doesnt make any more fglrx for the new xorg versions. you need to rant at amd for that decision. its a closed source driver. they only can compile it
[12:38] <curlyears> MonkeyDust, hey
[12:38] <MonkeyDust> curlyears
[12:38] <twelveheaded> k1l_: im gonna!
[12:38] <ducasse> r_rios: https://en.wikipedia.org/wiki/Compose_key
[12:38] <am_> eugenio_, nobody cares
[12:38] <curlyears> howdy, k1l_
[12:39] <callipygous> so glxinfo says I have Gallium 0.4 on AMD KABINI.  Is there a closed source binary I can install ?
[12:39] <r_rios> ducasse: I'm not sure this would be a good solution to me. ç is not really unusual and my keyboard has no Caps Lock light, so I think this would confuse me sometimes
[12:39] <eugenio_> can someone help me with this? http://paste.ubuntu.com/16277929/
[12:39] <eugenio_> I'd like to solve all possible issues
[12:40] <am_> twelveheaded, do you know how to solve this bug wtih video render?
[12:40] <r_rios> Anyway, I found out that I can do AltGr + comma, then c
[12:40] <ducasse> r_rios: you don't have to use caps lock :)
[12:40] <am_> I can't find solution
[12:40] <twelveheaded> am_: yeah, im installing Slackware.
[12:40] <am_> twelveheaded, Slack is for geeks
[12:40] <r_rios> Ah, right
[12:40] <ducasse> eugenio_: what problem?
[12:41] <am_> twelveheaded, I need the OS for usual working not for hard sex :)
[12:41] <twelveheaded> am_: its for people we dont appreciate being forced to work around problems they didnt invent themselves.
[12:41] <am_> :))
[12:41] <ducasse> eugenio_: none of those messages constitute a real problem, except maybe there's a problem with your TPM.
[12:41] <eugenio_> ducasse: eugenio@eugenio-NoThinkPad:~$ dmesg | grep failed >>> [    0.140460] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[12:41] <twelveheaded> Still cant find source on AMD stopping fglrx, can somebody point it to me?
[12:42] <eugenio_> ducasse: what is TMP?
[12:42] <vervet> am_: rofl
[12:42] <am_> Please, maybe somebody knows how to solve problem with video playing on Ubuntu? Artefacts and buggy collisions when playing...
[12:43] <ducasse> eugenio_: the first one is just a warning about something lacking ACPI support. TPM = Trusted Platform Module.
[12:43] <am_> vervet, ?
[12:43] <k1l_> twelveheaded: the news were full of the fact that amd stopped fglrx since xorg verison 1.18
[12:43] <po> ./ignore * CTCPS
[12:43] <vervet> am_: that about the slackware comment
[12:43] <skinux> k1l: Can you help with ProFTPd?
[12:44] <am_> vervet, :)
[12:44] <callipygous> so glxinfo says I have Gallium 0.4 on AMD KABINI.  Is there a closed source binary I can install ?
[12:44] <eugenio_> ducasse: ok, the battery is during very little and that's a new computer
[12:44] <k1l_> !ot | vervet am_ twelveheaded
[12:44] <eugenio_> i think it might be related to this issue on the power management tweak
[12:44] <ducasse> eugenio_: try to install powertop, see what eats up the battery.
[12:44] <twelveheaded> callipygous: sup nice butcheeks.
[12:45] <eugenio_> ducasse: ok let me try
[12:45] <callipygous> lol
[12:46] <twelveheaded> https://lists.ubuntu.com/archives/ubuntu-devel-discuss/2016-March/016315.html
[12:46] <curlyears> how can one change the size (increase it) of the gnome cursor?
[12:46] <skinux> Can anyone help with ProFTPd?
[12:46] <twelveheaded> So it's only a spat between Canonical and AMD.
[12:46] <eugenio_> ducasse: ok installed and running, where should i look?
[12:46] <twelveheaded> Not AMD generally stopping fglrx.
[12:47] <twelveheaded> GG misinformation.
[12:47] <k1l_> twelveheaded: no
[12:47] <callipygous> Okay
[12:47] <k1l_> twelveheaded: every other distribution shipping the latest xorg 1.18 will have the same issue.
[12:47] <callipygous> So what other drivers can I try with my graphics card?
[12:47] <ducasse> eugenio_: google it and read the docs online. never used it, I hate laptops. just know it can help.
[12:48] <callipygous> says it's and AMD KABINI
[12:48] <eugenio_> ducasse: ok tnx
[12:48] <twelveheaded> k1l_: well, not all other distros forces/sneaks in updates. So it's kinda your brand of problem.
[12:48] <k1l_> twelveheaded: "And installing the package from AMD doesn't help, as it doesn't support
[12:48] <k1l_> the xserver 1.18 video ABI"
[12:48] <k1l_> twelveheaded: please read the link you posted.
[12:48] <twelveheaded> Yeah, gonna install Slackware back again, because my three years of coding doesn't work anymore on Ubuntu after upgrade.
[12:49] <twelveheaded> Dude, i read it. I'm going to install 1.17 on Slackware. What's hard to understand?
[12:49] <k1l_> twelveheaded: gl for the slackware community for that attitude then.
[12:49] <ducasse> twelveheaded: then do that and stop whining.
[12:49] <twelveheaded> k1l_: when you got options you use them. When you are forced you can only cry to people who dont give a shit.
[12:49] <curlyears> how can one change the size (increase it) of the gnome cursor??
[12:50] <tester661> Hi
[12:50] <curlyears> well, I can get ignored in any channel.
[12:51] <FManTropyx> lol
[12:51] <EriC^^> #ubuntu is like siri of the iphone for google
[12:51] <i4> eah
[12:51] <EriC^^> (in some people's minds)
[12:51] <FManTropyx> gotta love people who demand a response in 1 minute
[12:52] <i4> Really? Nobody faced with this video bug poroblem? I don't beleave
[12:53] <ducasse> i4: you haven't given us any useful info, how are we supposed to help you?
[12:54] <cristian_c> EriC^^: hello
[12:54] <i4> ducasse, I starting play the video in VLC player and video displaying is buggy
[12:55] <ducasse> i4: video card and driver?
[12:55] <i4> Artefatcs, green noise and lined parts
[12:55] <EriC^^> cristian_c: hi
[12:55] <i4> nVidia GTX 960
[12:55] <cristian_c> EriC^^: I've tried and with rc.local it starts
[12:55] <ducasse> i4: nouveau or nvidia?
[12:55] <i4> Ubuntu 16.04
[12:56] <cristian_c> EriC^^: if I launch the script from rc.local, it works. It doesn't work if it's launched by the systemd service, intead
[12:56] <cristian_c> +s
[12:57] <cristian_c> EriC^^: unfortunately, with rc.local , startup is much slower
[12:57] <cristian_c> EriC^^: I don't know why the .service isn't working
[12:57] <tester661> Kto polak ?
[12:57] <callipygous> Okay , so I have a Radeon HD 8330
[12:57] <i4> ducasse, nvidia driver, not nouveau
[12:57] <callipygous> what driver should I be using?
[12:57] <EriC^^> cristian_c: no idea
[12:58] <tester661> [n0mad]
[12:59] <tester661> Moja lokacja: Nowa Świdnica, Polska
[12:59] <tester661> Moja lokacja: Nowa Świdnica, Polska
[12:59] <MonkeyDust> !pl
[12:59] <ducasse> i4: in vlc, try tools - preferences - video - output: vdpau
[13:02] <i4> ducasse, ok
[13:02] <ducasse> i4: then try playing a video to see if it's any better.
[13:03] <cristian_c> I've tried to start my own .service file, but when I use systemctl start myservice.service, I don't see my service in the task manager
[13:03] <cristian_c> I've also tried systemctl status myservice.service, but I can't figure out what is the issue
[13:04] <cristian_c> I've looked also at syslog, but I can't figure out what is the issue
[13:04] <cristian_c> Any ideas?
[13:04] <i4> ducasse, no affects
[13:05] <ducasse> i4: then try the other three entries in that menu that have (XCB) after the name.
[13:05] <i4> ok
[13:05] <cristian_c> EriC^^_: ok, but I don't understand why you'vs asked to me to make the test
[13:07] <callipygous> What are my driver choices?
[13:07] <callipygous> can I only use the open source radeon driver?
[13:07] <callipygous> Is it the only one?
[13:07] <callipygous> I can't get  a game to work, and I suspect something is wrong with the driver
[13:07] <cristian_c> callipygous: what gpu?
[13:07] <cristian_c> callipygous: what release?
[13:08] <callipygous> says amd kabini radeon hd 8330
[13:09] <callipygous> I'm runnign Ubuntu 16.04
[13:09] <cristian_c> I suppoe not gcn
[13:09] <OerHeks> callipygous, yes, see the releasenotes for 16.04, https://wiki.ubuntu.com/XenialXerus/ReleaseNotes#Graphics_and_Display
[13:09] <OerHeks> no fglrx
[13:09] <callipygous> I understand that the fglrx isn't available
[13:09] <callipygous> but what is available that could work?
[13:09] <cristian_c> callipygous: ubuntu auto-selects 'amdgpu' driver only for gcn gpus, I suppose
[13:10] <callipygous> gcn?
[13:10] <OerHeks> could work for what?
[13:10] <cristian_c> callipygous: graphics core next
[13:10] <callipygous> could work for DRI or whatever this game needs to launch
[13:11] <callipygous> so should I try amdgpu driver?
[13:11] <cristian_c> read carefully:
[13:11] <cristian_c> callipygous: ubuntu auto-selects 'amdgpu' driver only for gcn gpus, I suppose
[13:11] <rubiksmomo> How can I get the nvidia driver working? Nvidia installer cannot find my kernel headers... http://ubuntuforums.org/showthread.php?t=2323687
[13:11] <cristian_c> callipygous: if your gpu is not gcn, you'll probably have to accept 'radeon' driver
[13:11] <skweek> I updated to 16.04 and I've got blue bars at the top and bottom of the screen http://tinypic.com/r/vzagp1/9
[13:12] <i4> ducasse, no lucky) artefacts and bugged video output anyway(
[13:12] <yeats> rubiksmomo: install linux-headers for your kernel (probably linux-headers-generic)
[13:12] <yeats> rubiksmomo: but the nvidia modules are in the standard repos - no need for manual install
[13:13] <OerHeks> yeats, he has been here for days, no clue how to help him
[13:13] <cristian_c> callipygous: 'admgpu' is better, but it's reserved for selected gpus
[13:13] <rubiksmomo> yeats, "linux-headers-generic is already the newest version.". I installed nvidia driver using apt, but I cannot select nvidia from prime. It just rolls back on login.
[13:14] <string__> Hello is anyone familar with bonding two usbinternet connections to one in order to get faster internet?
[13:15] <Grano> Hi
[13:16] <callipygous> cristian_c: how do I tell if my gpu is special?
[13:16] <callipygous> err, 'selected'
[13:16] <ducasse> i4: in that case I would try a coupe of other players. if none work then you might need to switch to nouveau.
[13:16] <cristian_c> callipygous: wait a moment
[13:17] <cristian_c> callipygous: https://en.m.wikipedia.org/wiki/Graphics_Core_Next
[13:18] <callipygous> GCN is also used in the AMD Accelerated Processing Units code-named "Temash", "Kabini"...
[13:18] <callipygous> mine is codenamed Kabini, so perhaps I'm in luck?
[13:18] <callipygous> thanks for the link cristian_c
[13:20] <cristian_c> callipygous: vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 9832 ("Kabini [Radeon HD 8330]") from: http://cateee.net/lkddb/web-lkddb/DRM_AMDGPU.html
[13:20] <cristian_c> callipygous: so, it's very strange
[13:20] <callipygous> what is strange?
[13:20] <i4> ducasse, ok, other players no affect :) i'll try to nouveau
[13:21] <cristian_c> found in Linux kernels: 4.2–4.5, 4.6-rc+HEAD
[13:21] <cristian_c> modules built: amdgpu
[13:21] <cristian_c> callipygous: your gpu seems supported by amdgpu
[13:21] <callipygous> how do I tell which one is enabled?
[13:21] <cristian_c> callipygous: I think you should check your kernel configuration
[13:21] <ducasse> i4: that's what I would do. I have no experience with nvidia, but I've had amd cards that only worked properly with the open source driver.
[13:22] <EriC^^> cristian_c: it was just a suggestion/joke
[13:22] <EriC^^> might as well use rc.local til you have it working from systemd
[13:23] <ducasse> callipygous: 'lcpci -k' will show you what kernel module is loaded now.
[13:23] <EriC^^> cristian_c: maybe try using systemd with different settings, like respawning it
[13:23] <cristian_c> EriC^^: 'jokeì .... -,-
[13:24] <EriC^^> i did say *cough* rc.local *cough*
[13:24] <EriC^^> it's cause rc.local is hated a lot
[13:24] <i4> ducasse, thank you!
[13:24] <EriC^^> but honestly in your case if you dont need systemd to respawn it and other features i dont see why somebody wouldn't use rc.local
[13:24] <cristian_c> EriC^^: ok, but shoukd I change the .service file contents?
[13:24] <cristian_c> *should
[13:24] <callipygous> yeah, it's using the radeon driver, according tot hat
[13:24] <ducasse> i4: no problem, hope you get it working. sorry i couldn't help more.
[13:24] <callipygous> how do I switch drivers, though?
[13:25] <cristian_c> EriC^^: I noticed, as said, that startup is much slower
[13:25] <ducasse> cristian_c: can you pastebin the .service unit so i can take a quick look?
[13:25] <EriC^^> cristian_c: put /path/to/script &
[13:25] <Grano> Is there a way to activate vsync in Ubontu Gnome?
[13:25] <EriC^^> not just /path/to/script
[13:25] <Grano> Ubuntu* im using the iGPU on the i5 6400
[13:26] <cristian_c> EriC^^: ah, ok, final ampersand (to execto= field)?
[13:26] <cristian_c> in the .service file
[13:26] <EriC^^> cristian_c: no, that was for the rc.local
[13:26] <EriC^^> so it backgrounds it and continues
[13:26] <cristian_c> EriC^^: ok
[13:27] <cristian_c> ducasse: ok
[13:28] <callipygous> Does anybody know how I can swich from using radeon driver, to using amdgpu driver?
[13:30] <cristian_c> ducasse: http://pastebin.ubuntu.com/16279118/
[13:31] <cristian_c> callipygous: I think you should check your kernel configuration
[13:32] <rubiksmomo> How can I get the nvidia driver working? Nvidia installer cannot find my kernel headers, even "linux-headers-generic is already the newest version.". I installed nvidia driver using apt, but I cannot select nvidia from prime. It just rolls back to intel on login. http://ubuntuforums.org/showthread.php?t=2323687
[13:34] <ducasse> cristian_c: so, is this intended to run once on boot or does it start a daemon?
[13:34] <bekks> rubiksmomo: Whats the output of "uname -a"?
[13:35] <rubiksmomo> bekks, Linux acidburn 4.5.3-040503-generic #201605041831 SMP Wed May 4 22:33:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
[13:35] <bekks> rubiksmomo: And whats the output of "cat /etc/issue"?
[13:36] <rubiksmomo> bekks, Ubuntu 14.04.4 LTS \n \l
[13:36] <cristian_c> ducasse: it should start a 'java' daemon
[13:36] <bekks> rubiksmomo: Weird kernel then.
[13:36] <rubiksmomo> bekks, Installed it manually because of the issues.
[13:36] <bekks> rubiksmomo: Because of which issues?
[13:36] <cristian_c> ducasse: if I launch the script, a 'java' process is located in the task manager
[13:36] <ducasse> cristian_c: then you should probably use Type=forking.
[13:37] <cristian_c> ducasse: ahhh, ok
[13:37] <rubiksmomo> bekks, 10-30min delay until the login screen appeared when using nvidia driver.
[13:37] <cristian_c> ducasse: an #upstart user has told me to use 'simple' Type, in the .service file
[13:37] <cristian_c> and not forking
[13:37] <bekks> rubiksmomo: And which nvidia chipset do you have?
[13:37] <ducasse> cristian_c: otherwise systemd won't see the service as started until it exits with 0, aiui.
[13:38] <rubiksmomo> bekks, GeForce GTX 960M + Intel
[13:38] <ducasse> cristian_c: i could be wrong though, still learning systemd :)
[13:38] <cristian_c> ducasse: ah, ok, I didn't know, thanks!
[13:38] <cristian_c> ducasse: thank you very much! :)
[13:38] <cristian_c> I try immediately
[13:38] <bekks> rubiksmomo: And you were using nvidia-prime?
[13:38] <ducasse> cristian_c: np, hope it helps.
[13:38] <rubiksmomo> bekks, Yes. But it changes back to Intel when I login.
[13:39] <cristian_c> ya
[13:39] <bekks> rubiksmomo: Which version of linux-headers do you have installed, currently?
[13:40] <rubiksmomo> bekks, I'm not sure. How do I check?
[13:40] <bekks> rubiksmomo: apt-cache policy linux-headers
[13:41] <ducasse> rubiksmomo: then why not have the system switch to nvidia on every login?
[13:41] <Abe_> rubiksmomo: didn't work? sorry was gone
[13:41] <rubiksmomo> Abe_, nope
[13:41] <rubiksmomo> ducasse, how?
[13:42] <ducasse> rubiksmomo: 16.04?
[13:42] <bekks> rubiksmomo: whats the output of "apt-cache policy linux-headers"?
[13:42] <rubiksmomo> Ubuntu 14.04.4 LTS 64bit
[13:42] <rubiksmomo> bekks, it says none
[13:42] <Abe_> rubiksmomo: :(
[13:43] <Abe_> rubiksmomo: did you try the 352 nvidia driver?
[13:43] <rubiksmomo> Abe_, Yeah. It just uses Intel.
[13:43] <simtexx> can anyone share a link on a guide to help me install my OpenVPN PIA please
[13:43] <ducasse> rubiksmomo: then you could have a quick check in ~/.bash_profile that checks if you are on intel and switches to nvidia.
[13:43] <bekks> rubiksmomo: So you did not install any headers.
[13:43] <ducasse> simtexx: that is on the PIA site.
[13:44] <rubiksmomo> bekks, I did.
[13:44] <darth_vader> there is  a problem i am facing, i was using 15 version, updated it and when shifted from unity to kde, the kernel won't start
[13:44] <bekks> rubiksmomo: You just configrmed for yourself, you didnt.
[13:44] <EriC^^> rubiksmomo: type dpkg -l linux-headers* | nc termbin.com 9999
[13:44] <dspnwb> help huhuhu
[13:44] <rubiksmomo> EriC^^, type dpkg -l linux-headers* | nc termbin.com 9999
[13:44] <dspnwb> my screen goes black after nvidia driver install
[13:44] <rubiksmomo> EriC^^, http://termbin.com/fngf
[13:45] <dspnwb> huhuhuhu help
[13:45] <__raven> how to fix broken apt/dpkg? every ccommand fails due to an old kernel which still is in any inventory but not installed any more 3.13.0-71-generic
[13:46] <dspnwb> my screen goes black after boot when i install nvidia drivers
[13:46] <GnomeKris> If I write 14.04 to a disk and use it to downgrade from 16.04, what's the most effective way of saving my settings and such?
[13:46] <Abe_> dspnwb: which driver's are you using output of lspci would be useful
[13:46] <bekks> dspnwb: And which Ubuntu are you using? Which nvidia chipset do you have? Which driver version are you using? How did you install it?
[13:46] <EriC^^> __raven: purge it
[13:46] <Abe_> which driver*
[13:46] <dspnwb> 14.04
[13:46] <callipygous> I cannot work out how to enable the amdgpu driver?
[13:46] <callipygous> How do I enable it?  radeon isn't working for me
[13:47] <Abe_> dspnwb: people here need more details
[13:47] <callipygous> apparently it supports my graphics card, but radeon is the loaded driver
[13:47] <bekks> dspnwb: And the other three questions?
[13:47] <dspnwb> i installed  nvidia-352 which has my GM108M
[13:48] <dspnwb> after boot is blackout but i hear login sound
[13:48] <ducasse> callipygous: just a guess, but you could blacklist radeon and have the system modprobe amdgpu?
[13:48] <bekks> dspnwb: Did you install nvidia-prime as well?
[13:48] <dspnwb> nopde
[13:48] <Kira9204> I have some trouble upgrading ubuntu 15.19 to ubuntu 16.04
[13:48] <Kira9204> Starting Apahce fails with "Failed to start apache2.service: The name org.freedesktop.PolicyKit1 was not provided by any .service files"
[13:48] <bekks> dspnwb: You have a Optimus chipset, you need nvidia-prime
[13:48] <callipygous> I could give that a try, but I want to make sure ssytem boots
[13:48] <Kira9204> *ubuntu 15.10
[13:48] <ducasse> callipygous: that will go horribly wrong if amdgpu doesn't work, though.
[13:48] <dspnwb> i will try
[13:48] <mrasker> hello,
[13:49] <mrasker> i installed 16.04 in my netbook and there is no sound although it works with headphones
[13:49] <ducasse> callipygous: install ubuntu to a usb drive, then experiment on that.
[13:49] <callipygous> worth a shot
[13:49] <mrasker> do you know any solution?
[13:49] <Abe_> dspnwb: callipygous I hope you made backup's before doing upgrade
[13:49] <i4> try to set xrandr --newmode for nVidia geforce GTX960
[13:49] <GnomeKris> Kira9204, Don't upgrade yet.
[13:49] <Abe_> sorry just callipygous
[13:50] <i4> but have an error
[13:50] <GnomeKris> If you're happy with 15.10, keep it there. To many bugs in 16.04 IMO
[13:50] <bekks> GnomeKris: 16.04 is considered being stable.
[13:50] <Abe_> GnomeKris: Is right
[13:50] <i4> I try to set by this line: xrandr --newmode "3840x2160" 60 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
[13:50] <Kira9204> GnomeKris, good thing i made a snapshot before then :)
[13:50] <bekks> GnomeKris: And support for 15.10 ends in about three months.
[13:50] <i4> and get this error: xrandr: Failed to get size of gamma for output default
[13:51] <Abe_> bekks: It's everything but stable xD.. just ruined my system yesterday.. I'm back on 14.04
[13:51] <Kira9204> altho i thought it would be "stable enought" to update at this point
[13:51] <bekks> Abe_: 16.04 works fine for me.
[13:51] <i4> what I doing wrong
[13:51] <GnomeKris> bekks, maybe in three months, some of the 16.04 bugs will be worked out...Until then, I'm rolling back to 14.04
[13:51] <ducasse> i4: you may need to specify output
[13:51] <i4> ducasse, what do you mean?
[13:51] <Abe_> bekks: are u using Unity ? that might be more stable but KDE Plasma 5 is horrible
[13:52] <ducasse> i4: 'man xrandr' - especially look at --output.
[13:52] <Kira9204> still tho, any clue as to why it suddenly broke?
[13:52] <__raven> EriC^^: not possible it fails also
[13:52] <GnomeKris> Kira9204, I should have made a snapshot of my 14.04 install before upgrading. I have learned the hard way not to upgrade until ALL the kinks are worked out, and to always have a backup
[13:52] <GnomeKris> What broke?
[13:52] <bekks> Abe_: Yes.
[13:52] <Kira9204> The Apache service
[13:52] <Kira9204> Failed to start apache2.service: The name org.freedesktop.PolicyKit1 was not provided by any .service files
[13:53] <Abe_> bekks: yeah I tried Kubuntu :/ was not a good Idea... rebuilding my system the hole night now
[13:53] <bekks> Abe_: Rebuilding sounds like "I had no backup".
[13:53] <GnomeKris> It seems like everywhere I look, people are running into broken parts of 16.04...and everyone has something different that's broken after the upgrade.
[13:53] <BluesKaj> GnomeKris, have you tried fixing your audio by purging pulsweaudio, some of it's settings in 16.04 are mucked up and wrong headed
[13:53] <dspnwb> hello
[13:53] <Kira9204> so far i have not found the root cause, but it seems to be some permission somewhere that got messed up
[13:53] <rubiksmomo> Any idea how can I get the nvidia driver working? Nvidia installer cannot find my kernel headers, even "linux-headers-generic is already the newest version.". I also tried installing the nvidia driver using apt, but I cannot select nvidia from prime. It just rolls back to intel on login. http://ubuntuforums.org/showthread.php?t=2323687
[13:53] <dspnwb> i already have nvidia-prime installed...
[13:54] <bekks> rubiksmomo: And which version of the linux headers is the installer searching for?
[13:54] <Abe_> bekks: yes I did make backup.... I'm not that dumb :-D.. but all my configuration's are screwed up...
[13:54] <GnomeKris> I haven't tried to purge BluesKaj, but that's not gonna matter anyway. If I can't get my games to work right graphically, then there is no point in staying at 16.04 anyway.
[13:54] <Abe_> saved all my important files to my external harddrive
[13:54] <bekks> Abe_: So you did not make a backup. Having a backup means "no messed up configuration files". ;)
[13:55] <rubiksmomo> bekks, linux-headers-4.5.3-040503-generic
[13:55] <GnomeKris> Half my steam games don't even open with the open source driver, the other half have missing or distorted bits everywhere.
[13:55] <dspnwb> i already have nvidia-prime installed....but still my GM108M, after boot the screen goes black....huhuhuhu
[13:55] <bekks> rubiksmomo: As you can see in your former dpkg -l output, that particular package isnt installed.
[13:55] <Abe_> well i saved all my files :(
[13:55] <BluesKaj> GnomeKris, ok, amd/ati gpus are suffering a lack of linux support more and more as time goes on.
[13:56] <Abe_> i consider that a backup... after I formatted my HDD what else should i do?
[13:56] <GnomeKris> I've noticed. It really sucks a big one too.
[13:57] <bekks> Abe_: Before you formatted it, you should have saved all files. That would have saved you a lot of time you are wasting for rebuilding currently.
[13:57] <rubiksmomo> bekks, I think I ran: dpkg -i linux-headers-4.5.3-040503_4.5.3-040503.201605041831_all.deb
[13:57] <rubiksmomo> bekks, Should I try it again?
[13:57] <bekks> rubiksmomo: No. Because "linux-headers-4.5.3-040503_4.5.3-040503.201605041831_all" isnt "linux-headers-4.5.3-040503-generic".
[13:58] <rubiksmomo> bekks, oh
[13:59] <gobelin789> Hello! I've created some key pairs with different comments to organize them. If I add them to the agent with ssh-add and check the fingerprints with ssh-add -l it always says 'rsa w/o comment'. Shouldn't the comment appear here?
[13:59] <rubiksmomo> bekks, How could I properly install v4.5 kernel? 4.6 is in login loop. And 4.2 has over 10min delay before login screen appears when using nvidia.
[13:59] <dspnwb> @bekks i will try deleting intel in xorg.conf
[13:59] <Abe_> bekks: I did save all my files on my HDD? I made a complete fresh install and formatted my HDD...how should I save if I format?
[14:00] <i4> ducasse, how can I check my video outputs?
[14:00] <Abe_> *external HDD
[14:00] <i4> monitor is on HDMI-0
[14:00] <i4> but this output is not working when i try to point at cmd
[14:00] <bekks> !backup | Abe_
[14:01] <ducasse> i4: what error do you get? "not working" is not informative.
[14:02] <i4> unrecognized option HDMI-0
[14:02] <nixoeen> Can anyone login in https://wiki.ubuntu.com? Everytime I try to login, it takes either too long or I get a 500 Error.
[14:02] <i4> ducasse, this
[14:03] <i4> output HDMI-0 not found ignoring
[14:03] <ducasse> i4: 'xrandr --output HDMI-0 ....'
[14:04] <i4> yep, I do this allready
[14:04] <i4> "output HDMI-0 not found ignoring"
[14:04] <i4> and old error too
[14:04] <i4> it's not help
[14:04] <lyze> i4: nvidia? … for me it works with HEAD-X … where X is the number of the display
[14:05] <i4> lyze, yep
[14:05] <mrasker> if i open a terminal and type: alsactl restore, then it shows an error but it works until i reboot
[14:06] <i4> https://gist.github.com/anonymous/c19bff644f00e9fac0144cca099e57dc
[14:06] <i4> This is command and output in cmd
[14:07] <__raven> how to fix broken package system? every command fails due to an old kernel which still is in any inventory but not installed any more 3.13.0-71-generic
[14:07] <bekks> __raven: whats the full output you get?
[14:08] <arrrghhh> hey there, does anyone have experience with LIRC?  I am trying to fumble my way through it, and seems like I need a later version then the Ubuntu repo's provide...
[14:08] <arrrghhh> I tried to find a ppa, but I haven't been able to get one for xenial specifically
[14:09] <__raven> bekks: http://pastebin.com/GQYjKXmy
[14:09] <i4> hm...
[14:09] <i4> it sets
[14:12] <GnomeKris> If I copy paste JUST my home directory to my secondary hdd, and tell the installer to use that for my home directory when downgrading to 14.04, how much data will I lose?
[14:12] <ducasse> __raven: 'sudo dpkg -r packagename'
[14:12] <bekks> GnomeKris: All data not stored in your home.
[14:12] <GnomeKris> Which is basically just installed apps right?
[14:13] <GnomeKris> And settings
[14:13] <bekks> GnomeKris: OR other data you stored outside your home. All global configurations, etc.
[14:13] <ducasse> arrrghhh: build a package yourself?
[14:13] <i4> ducasse, https://gist.github.com/anonymous/8ade4123d262fa89625990c4af2b32f0
[14:13] <i4> this's current output of xrandr after my manipulations
[14:14] <i4> but i can't see output HDMI-0 or something else
[14:14] <i4> o.O
[14:14] <arrrghhh> ducasse, I was really hoping for a ppa so I don't have to maintain it
[14:14] <GnomeKris> I won't be losing anything super important that I can't get back then. I haven't had this installation for long enough to say I've got a ton of stuff stored outside of /home/
[14:15] <ducasse> arrrghhh: well if there isn't one then you don't really have a lot of other options.
[14:15] <__raven> ducasse: same error
[14:15] <i4> When i try addmode with xrandr: https://gist.github.com/anonymous/5504d95a602829f575d8712e3bc66cd4
[14:16] <arrrghhh> ducasse, hm ok.  I think I'll have to research this a bit more, I want to make sure this will work before I go down that route
[14:16] <BluesKaj> GnomeKris, you can always just instll to / and just set the mountpoint for /home in the manaul partitioner/something else in ubiquity
[14:16] <arrrghhh> anyone have experience setting up LIRC?
[14:16] <GnomeKris> BluesKaj, did you just speak yiddish?
[14:17] <BluesKaj> GnomeKris, oh you mean gibberish ? :-)
[14:17] <ducasse> __raven: it would be really nice if you could paste your errors with an english locale, i remember very little german from school :)
[14:17] <GnomeKris> haha, That too.
[14:17] <GnomeKris> Laymen's terms?\
[14:18] <mrasker> any idea?
[14:18] <__raven> ducasse: how to set the locale?
[14:19] <EriC^^> __raven: LANG=C <command you want to run here>
[14:19] <ducasse> __raven: prefix your command with 'LC_ALL=C '
[14:19] <ravi> in ubuntu after closing the lid of laptop, it is not suspending
[14:19] <ducasse> sorry, LANG
[14:19] <GnomeKris> I'm gonna have to sudo cp to move everything in my home directory aren't I?
[14:20] <lyze> ducasse, errors when managing linux-image-extrao-3.13.0-71.generic (--remove): Subprocess installed post-removal-script returned 1.
[14:20] <lyze> ducasse, Packages "linux-image-extrao-3.13.0-71-generic and linux-image-3.13.0-71-generic" errored
[14:21] <ducasse> lyze: what is it that errors out, you can see it in the full output.
[14:21] <ravi>  in ubuntu 16.04 after closing the lid of laptop, it is not suspending.
[14:21] <BluesKaj> GnomeKris, http://askubuntu.com/questions/283060/how-do-i-use-my-home-directory-on-a-separate-partition
[14:21] <arrrghhh> ravi, did you check the suspend settings?
[14:22] <ravi> arrrghhh, yes i checked it is all right
[14:22] <SchrodingersScat> GnomeKris: I normally rsync my /home/ somewhere and pull down things I need as I go, to each their own though, you could rsync it one way and rsync the entire thing back, or like you said could make it a separate /home/ in the install.
[14:22] <arrrghhh> ravi, can you put the laptop to sleep without closing the lid?
[14:23] <lyze> ducasse, it was the translation from __raven. I just translated the lines which were not in english. So the first message was: line 29, 30. and the second message was 39-43
[14:23] <ravi> arrrghhh, yes
[14:23] <ducasse> lyze: ok, sorry.
[14:23] <SchrodingersScat> GnomeKris: you need to consider if you changed anything in /etc/ manually that you can't reproduce, only you know how you use your computer.
[14:23] <arrrghhh> ravi, settings for lid closure must not be set.  doublecheck
[14:23] <lyze> Just tried to help ^v^
[14:24] <\9> GnomeKris: there isn't anything outside /home that's important that you wouldn't know of
[14:24] <leachim6> what's with all of the freenode hate spam in this channel?
[14:24] <GnomeKris> SchrodingersScat, I have an ssd and an hdd installed in my pc. Was planning on using the hdd for /home/ and the ssd for the os (only because the hdd is larger). I did not change anything outside of /home though.
[14:24] <leachim6> is anyone else seeing this?
[14:25] <bekks> leachim6: Everyone else is just ignoring it :)
[14:25] <GnomeKris> I just need to sudo cp in order to move some of the hidden files due to permissions.
[14:25] <\9> GnomeKris: then you should be ok
[14:25] <\9> leachim6: it's just that. spam.
[14:25] <ravi> arrrghhh, yes I crosschecked but it is all right
[14:25] <ducasse> __raven: it looks like all/most files in those packages have been manually removed.
[14:25] <arrrghhh> ravi, just put it to sleep manually then?
[14:25] <i4> please, how to setup resolution for 4k in ubuntu 16.04 for nvidia nouveau driver?
[14:25] <__raven> EriC^^ ducasse bekks http://pastebin.com/dg2hT9nh
[14:26] <i4> I can't solve this task. And default display settigns shows only 800x600 o.O
[14:26] <arrrghhh> i4, the proprietary nvidia drivers usually work best
[14:27] <i4> arrrghhh, tell this to my video player that can't display video stream correctly(
[14:27] <arrrghhh> i4, huh?  I'm telling you from experience that the open source nvidia drivers are not so great
[14:27] <arrrghhh> use the binaries directly from nvidia
[14:28] <am_> arrrghhh, dam...
[14:28] <arrrghhh> am_, ?
[14:28] <am_> arrrghhh, i was tried to solve teh problem with VLC player that show all video with artefacts
[14:29] <am_> but no solution found
[14:29] <arrrghhh> I'm not following
[14:29] <arrrghhh> I'm guessing am_ = i4
[14:29] <am_> yep
[14:29] <arrrghhh> but still, did you try to download the drivers from nvidia?
[14:29] <arrrghhh> and you installed them, rebooted etc?
[14:29] <i4_> yes
[14:29] <arrrghhh> that's going to be your best driver
[14:29] <arrrghhh> for nvidia
[14:30] <i4_> I install xorg nouveau driver and reboot, but there is only 800x600 resolution
[14:30] <zykotick9> arrrghhh: downloading nvidia.com's driver is a terrible idea/suggestion...
[14:30] <arrrghhh> i4_, don't use the oss drivers
[14:30] <arrrghhh> zykotick9, always worked well for me
[14:30] <SchrodingersScat> !backups | GnomeKris
[14:30] <arrrghhh> I guess if you have a better suggestion, make it :)
[14:30] <i4_> arrrghhh, what does it mean OSS driver?
[14:30] <arrrghhh> i4_, nouveau driver is open source
[14:30] <i4_> with this xorg nouveau nvidia driver video works correctly
[14:31] <arrrghhh> i4_, evidently it doesn't :)
[14:31] <GnomeKris> Okay, theory time. First, I sudo cp my home directory to hdd. Second, I reboot to 14.04 installation media and begin install. During install, point it to new /home on hdd, but everything else goes to the ssd. Complete wipe of ssd during install will remove any remnants of old /home. Installer will automatically detect all things needed from hdd for /home (uuid and other such technical stuff). Lastly, once installation is completed, bo
[14:31] <GnomeKris> ot to newly installed 14.04, setup preferences and install apps....Enjoy!
[14:31] <GnomeKris> Is this accurate?
[14:31] <i4_> arrrghhh, what doies it mean OSS driver?
[14:32] <arrrghhh> i4_, open source I said already
[14:32] <i4_> oh sorry
[14:32] <zykotick9> arrrghhh: i pasted #debian's "why nvidia installer sucks" factoid to http://paste.ubuntu.com/16280504/ <- same basically applies to ubuntu as well.  Use ubuntu's packages, would be my _strong_ suggestion.
[14:32] <ducasse> arrrghhh: with nvidia's driver he can't play videos, so it doesn't work well for him.
[14:32] <i4_> and why you advice to don't use them?
[14:32] <arrrghhh> ducasse, I think he's missing something
[14:32] <arrrghhh> but I dunno I'm guessing that machine can't handle 4k
[14:32] <i4_> ducasse, thanks
[14:33] <\9> GnomeKris: sounds about right. before installing I'd double check on the live session to ensure that your new home dir is working fine
[14:33] <snima> I have a repository on a machine but I do not know its version. How can I get the version?
[14:33] <i4_> arrrghhh, 4k is working perfectly before on 14.04\
[14:33] <i4_> on 60Hz
[14:33] <bekks> snima: Ah repository of what?
[14:33] <bekks> snima: *A
[14:33] <arrrghhh> i4_, use what works then
[14:33] <i4_> ufter upgrading to 16.04 video broken)
[14:33] <\9> GnomeKris: and for the sake of everything be 100% careful when pointing the device names! it can't be stressed enough how easy it is to accidentally wipe everything
[14:33] <GnomeKris> \9, good idea, thanks for the tip
[14:33] <i4_> arrrghhh, stupid solution)
[14:33] <snima> bekks: ubuntu packages repositiry
[14:33] <arrrghhh> i4_, ok
[14:34] <bekks> snima: So you have you own PPA?
[14:34] <GnomeKris> Oh yea, I've made that mistake before too.
[14:34] <fabio_> how can I clean all unnoficial software sources and remove the packages that were installed by them?
[14:34] <snima> bekks: No, I think it is just a mirror of ubuntu oficial packages
[14:34] <bekks> !infp ppa-pure | fabio_
[14:34] <bekks> !infp ppa-purge | fabio_
[14:34] <GnomeKris> my disks sizes aren't even close to similar, so it's pretty easy to tell them apart.
[14:35] <bekks> Hmm, there used to be ppa-purge.
[14:35] <i4_> maybe someone knows how to setup resolution for nouveau xorg nvidia geforce gtx960 with xrandr? or something else? maybe link to howto?
[14:35] <zykotick9> bekks: !infP
[14:35] <bekks> zykotick9: D'oh :D
[14:35] <bekks> !info ppa-purge | fabio_
[14:36] <tim54> hi, I put just my OpenPGP encryption key on a smart card and gpg --card edit shows all the information etc. but how can I set Thunderbird/Enigma to use the smart card (there's a category "Manage SMart Card" but I can just addit the date and cretate a new key-pair)?
[14:36] <fabio_> bekks, but i want all of them at the same time
[14:37] <bekks> fabio_: So use ppa-purge.
[14:37] <zykotick9> fabio_: as the poet Jagger wrote "you can't always get what you want..."
[14:38] <\9> GnomeKris: my usual approach is to manually mount the drive before specifying it so I can be sure of exactly what I'm specifying. disk sizes are a good indicator yeah but not good enough to satisfy my paranoia :P
[14:38] <__raven> EriC^^ ducasse bekks could be possible. any time boot was out of space and upgrade crashed. how to fix that?
[14:38] <fabio_> zykotick9, :P
[14:39] <AlexP11223> I updated 15.10 to 16.04 and now it shows black screen with tty1 instead of desktop
[14:39] <bekks> __raven: give /boot more space, and remove old kernels more regular.
[14:40] <ducasse> __raven: you need to force removal of the package, try 'dpkg --force-help'
[14:40] <GnomeKris> The mount point for my hdd is /media/kristopher/Data/
[14:40] <GnomeKris> That's where I'll point my cp right?
[14:44] <rubiksmomo> Any idea how to get the nvidia driver working? If I select nvidia on prime settings it will be back to "Intel" on next login. http://ubuntuforums.org/showthread.php?t=2323687
[14:48] <ducasse> rubiksmomo: since nobody has been able to help you here, why don't you try somewhere else, like the ubuntu-users mailing list?
[14:48] <Abe_> why has ubuntu 16.04 still unity 7... not using it just seeing it, I thought they wanted to implement unity 8
[14:48] <BluesKaj> !optimus | rubiksmomo
[14:48] <rubiksmomo> BluesKaj, I have nvidia-prime
[14:49] <Abe_> It looks exactly like 14.04
[14:49] <OerHeks> Abe_, maybe after 16.10
[14:49] <bekks> rubiksmomo: And did you reboot to an official kernel?
[14:49] <BluesKaj> rubiksmomo, i expected a more detailed suggestion from the bot
[14:49] <rubiksmomo> bekks, They have a login loop I think. :<
[14:50] <Abe_> serious?
[14:50] <bekks> rubiksmomo: So login using a terminal.
[14:50] <rubiksmomo> bekks, And?
[14:50] <bekks> rubiksmomo: See what the issue actually is.
[14:50] <ducasse> Abe_: serious, what?
[14:51] <rubiksmomo> bekks, How?
[14:51] <bekks> rubiksmomo: How what?
[14:51] <Abe_> little dissapointed in this build...
[14:51] <OerHeks> Abe_, lts versions are stable versions without big new features.
[14:51] <OerHeks> always been, always will be
[14:52] <rubiksmomo> bekks, How do I see what causes the login loop by using the terminal?
[14:52] <ducasse> Abe_: it has zfs, that's all i ever wanted :)
[14:52] <bekks> rubiksmomo: You need to investigate global issues like "enough free space", "correct permissions" and you have to investigate your log files.
[14:53] <OerHeks> rubiksmomo, i think i asked before, any turbo mode or overclock setting used in the bios? that would explain it.
[14:53] <rubiksmomo> OerHeks, No, I can't even find such options from BIOS
[14:53] <OerHeks> but for now, you changed so many things, i think your ubuntuforumpost is out of date.
[14:55] <John[Lisbeth]> when I do do-release-upgrade, my machine has been saying for a long time that there is no upgrade available
[14:55] <John[Lisbeth]> I am on 15.10
[14:55] <__raven> ducasse: force remove options also do not help :(
[14:56] <Abe_> OerHeks: It's just unreal how long this is taking.
[14:56] <OerHeks> John[Lisbeth], try this first: sudo apt-get update && sudo apt-get dist-upgrade
[14:57] <ducasse> __raven: then i doubt there is much that can be done, restore from last consistent backup.
[14:58] <rick6860> my vlc player does not show a video -plays the sound, but locks the machine up.
[14:58] <ducasse> rick6860: try another player?
[14:58] <Lope> http://openjdk.java.net/install/index.html says `apt-get install openjdk-8-jre` but it's not in my apt-repos. Ubuntu 14.04. Any ideas?
[14:59] <bekks> __raven: you could edit the failing postrm, etc. scripts for exiting successfully, whatever happens.
[14:59] <GnomeKris> dang, I should have told cp to --verbose (or whatever it's called), so I can tell where it is in it's process
[14:59] <rick6860> ducasse, recommendations for another player?
[14:59] <lotuspsychje> rick6860: smplayer works like a charm
[15:00] <ducasse> rick6860: mplayer2, mpv, parole...
[15:00] <rick6860> lotuspsychje, got it
[15:00] <SchrodingersScat> rick6860: running vlc from command line might also show you some errors as well
[15:00] <rick6860> ducasse, what does one do when the computer locks up in ubuntu? ctr,alt,del does nothing
[15:00] <OerHeks> Lope, correct
[15:00] <OerHeks> !info openjdk-8-jre trusty
[15:01] <ducasse> rick6860: ctrl + alt + sysrq + r, e, i, s, u, b.
[15:01] <arrrghhh> rick6860, there's an alternate but it's a pain
[15:01] <arrrghhh> lol that's the one
[15:01] <rick6860> SchrodingersScat, vlc always worked well for me on windows side of things
[15:02] <MonkeyDust> rick6860  in what way does vlc lock your system? works like a charm here (16.04)
[15:02] <OerHeks> Lope, this post says use a ppa, or upgrade > http://askubuntu.com/questions/464755/how-to-install-openjdk-8-on-14-04-lts
[15:02] <craptalk> how to open any file by its default app from terminaL? like when i open *.mkv, what can i do?
[15:02] <MonkeyDust> craptalk  with  xdg-open
[15:02] <rick6860> MonkeyDust, starts the sound, no video.I cannot X out of vlc or do anything with the mouse or keyboard. vlc just keeps playing the sound.
[15:03] <craptalk> MonkeyDust: can you gimme complete example?
[15:03] <MonkeyDust> craptalk  xdg-open picture.jpg
[15:03] <gour_> p for printer
[15:03] <OerHeks> xdg-open /path/to/blablabla
[15:03] <gour_> how to install hplip in ubuntu 16.04
[15:03] <craptalk> and it is also working to all file formats?
[15:03] <MonkeyDust> craptalk  yes
[15:04] <craptalk> MonkeyDust: Good to try
[15:04] <rick6860> SchrodingersScat, how do i run vlc from command line?
[15:04] <bekks> rick6860: vlc filename
[15:04] <SchrodingersScat> rick6860: ^ from a terminal
[15:05] <rick6860> SchrodingersScat, no errors
[15:05] <Guest65567> i downloaded hplip .run file but it is not installing
[15:06] <lotuspsychje> Guest65567: sudo apt install hplip from terminal
[15:06] <craptalk> MonkeyDust: well, it is working, if i want to change to another app, so i need to change the default app in the setting? cause xdg-open is kind of invoking default app?
[15:06] <Guest65567> i did it but no result
[15:06] <JoseRuben> alguien ha hecho funcionar wasap en pc?
[15:06] <lotuspsychje> Guest65567: or sudo apt install hplip-gui for the gui
[15:06] <MonkeyDust> craptalk  yes, in the system settings
[15:06] <MonkeyDust> !es
[15:06] <craptalk> MonkeyDust: Thanks Dust
[15:07] <lotuspsychje> Guest65567: ubuntu version?
[15:07] <JoseRuben> sera para mi ? gracias...
[15:07] <JoseRuben> sip
[15:07] <JoseRuben> para ubuntu
[15:07] <lotuspsychje> !english | JoseRuben
[15:08] <\9> !es | JoseRuben
[15:09] <rick6860> VLC player won't play WMV. I downloaded MPG and it played
[15:09] <Guest65567> .16.04 version
[15:09] <JoseRuben> es un aespecie de xeno phibia ?
[15:09] <craptalk> i heard that windows can soon be able to use linux bash?
[15:09] <craptalk> is that true?
[15:09] <JoseRuben> xenophobia?
[15:10] <JoseRuben> o capricho?
[15:10] <arrrghhh> craptalk, they are implementing cygwin by default AFAIK
[15:10] <arrrghhh> https://msdn.microsoft.com/en-us/commandline/wsl/about < well not quite
[15:10] <arrrghhh> Windows is running Ubuntu user-mode binaries provided by Canonical. This means the command line utilities are the same as those that run within a native Ubuntu environment.
[15:11] <arrrghhh> !es | JoseRuben
[15:11] <arrrghhh> oh someone did that already derp
[15:11] <craptalk> arrrghhh: thats lovely one
[15:11] <lotuspsychje> Guest65567: what errors do you get?
[15:11] <Guest65567> how to install hplip in 16.04
[15:12] <craptalk> arrrghhh: dont have to download it separately
[15:12] <arrrghhh> craptalk, I think the anniversary update to win10 gets it
[15:12] <arrrghhh> but this is kind of #ot
[15:12] <lotuspsychje> Guest65567: open a terminal==>sudo apt install hplip hplip-gui
[15:12] <Guest65567> error Reading package lists... Done
[15:12] <Guest65567> Building dependency tree
[15:12] <Guest65567> Reading state information... Done
[15:12] <Guest65567> hplip is already the newest version (3.16.3+repack0-1).
[15:12] <Guest65567> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[15:12] <craptalk> arrrghhh: yeah, i gotta say sorry for it
[15:13] <lotuspsychje> Guest65567: install hplip-gui also, you well get a new icon to manage your printer
[15:14] <lotuspsychje> Guest65567: the plugin your printer with usb, and add it in printers
[15:15] <appleboy> I’m having a slight issue with bluetooth connecting from command line. If I use bluetoothctl I can run “connect <mac>” and it works fine, but sometimes the connection drops so I want to script it to automatically reconnect. The problem is if I try using bt-device to do it I get “Error: GDBus.Error:org.bluez.Error.AlreadyExists: Already Exists” even though it’s not connected. any ideas how I can auto reconnect?
[15:16] <__raven> ducasse EriC^^ bekks http://pastebin.com/47XZR1yJ
[15:18] <bekks> __raven: You did not edit the postrm script(s) to exit successfully, whatever happens.
[15:19] <LookingForStufff> Hello
[15:19] <LookingForStufff> Im looking for encoding softwares.
[15:19] <__raven> bekks: is there no way to remove the inventory entries??
[15:19] <bekks> __raven: that IS the way to remove them, cleanly.
[15:20] <tats_> hi everyone
[15:20] <rubiksmomo> LookingForStufff, What are you plannin on encoding?
[15:21] <tats_> what is the easiest and most reliable way to create a bootable Ubuntu drive with a set of specific pre-installed packages on it?
[15:22] <LookingForStufff> Im trying too encode a powershell injection for windows
[15:22] <bekks> tats_: Create a bootable drive, install your desired software, hand over your drive to whomever.
[15:22] <tats_> bekks, last time i tried this, whenever we restarted, the installed stuff was not there anymore
[15:23] <LookingForStufff> rubiksmomo you got anything for me?
[15:23] <bekks> tats_: Then you did not create a persistent installation.
[15:24] <Annoyed> Greetings
[15:24] <Annoyed>  Been having headaches w/ a Samba server for a few weeks now.. Starting when they did a patch for badlock? I think it was, I lost the ability to to write to shares. About a week later, a patch fixed that.. And now the recent patch to Version 4.3.9-Ubuntu broke it again.
[15:24] <rubiksmomo> LookingForStufff, We don't offer support for PowerShell or Windows here O_o
[15:24] <GnomeKris> Okay, home directory cp is done. Wish me luck on this install.
[15:24] <GnomeKris> Back later...I hope.
[15:24] <Annoyed> Anyone know what is going on with that?
[15:24] <LookingForStufff> Well encoding softwares still?
[15:25] <lotuspsychje> Annoyed: ubuntu version?
[15:25] <tats_> bekks, all right; are these instructions up to date: https://wiki.ubuntu.com/LiveUsbPendrivePersistent
[15:26] <cristian_c> ducasse: you are right
[15:26] <cristian_c> ducasse: it works, changing type from zimp,e to forking did the trick
[15:26] <cristian_c> ducasse: thank you again
[15:26] <cristian_c> :)
[15:27] <Annoyed> Started with 4.3.8, and now is 4.3.9
[15:27] <bekks> tats_: They are. But I'd rather install Ubuntu onto an USB, instead of creating a LiveUSBPersistentWhatever.
[15:27] <ducasse> cristian_c: good! you're welcome :)
[15:27] <lotuspsychje> Annoyed: ubuntu version?
[15:27] <ducasse> bekks: +1
[15:27] <Annoyed> lotuspsychje: Started with 4.3.8, and now is 4.3.9
[15:28] <lotuspsychje> Annoyed: not samba version, wich ubuntu version are you on please?
[15:28] <__raven> bekks: ok i will try to edit the scripts - where are they?
[15:28] <cristian_c> *simple
[15:28] <bekks> __raven: they are even named in your multiple pastebins.
[15:29] <ducasse> cristian_c: the systemd unit type man pages are actually pretty good, if you have similar problems in the future.
[15:29] <Annoyed> lotuspsychje: same configuration I've used for years  |  Ubuntu 14.04.4 LTS
[15:29] <lotuspsychje> Annoyed: is your system up to date also?
[15:30] <cristian_c> ducasse: I've read the manual and the systemd blog stories (psankar)
[15:30] <Annoyed> Yes, it's the server version, and is set to automatically update itself. As of 15 min. ago, it is current by a manual check; apt-get update / apt-get dist-upgrade, nothing available
[15:31] <cristian_c> ducasse: but it didn't help me to understand how to write the .service file, in my case
[15:31] <socket> Hello!
[15:31] <lotuspsychje> Annoyed: perhaps was related to this? http://www.ubuntu.com/usn/usn-2950-3/
[15:31] <lotuspsychje> Annoyed: perhaps backup your config, purge and reinstall?
[15:32] <yabba_> hi if i have a process pid, how can i find more information about the process? name, when it was started, etc
[15:32] <ioria> yabba_, /proc/<pid>/
[15:33] <ducasse> cristian_c: you can look at the distribution scripts if you need examples, but few are documented. but still, it works now, that's the main thing :)
[15:34] <tats_> bekks, Ok... how would I do that? do you mean to use this: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-ubuntu?
[15:35] <cristian_c> ducasse: ok
[15:35] <tats_> that's what I did last time but it did not preserve persistence
[15:35] <tats_> (sorry i mean it was not persistent)
[15:35] <ducasse> tats_: just install to a usb stick instead of a hard drive
[15:36] <tats_> ducasse, ok, but this is exactly what i did last time: i installed ubuntu on a usb stick, then booted into it, then ran apt-get install for whatever softs I wanted
[15:36] <Annoyed> lotuspsychje: Looking at dpkg log shows the samba version installed to be the one recommended in that web page. 2:4.3.9+dfsg-0ubuntu0.14.04.1
[15:36] <tats_> but then when i rebooted none of my installed software was there
[15:37] <tats_> so i guess i need to create a "persistent" drive but i don't know how to do this
[15:37] <tats_> the instructions here (http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-ubuntu) don't explain how to do that
[15:37] <elosz> hello, I've host machine as ubuntu and I am running 2 VM (both ubuntu). How can I ensure communication between 2 VM's? I want both of them to ping each other
[15:38] <lotuspsychje> Annoyed: yes its the good version, but as for recent security flaws..perhaps reinstall could help?
[15:38] <ducasse> tats_: https://duckduckgo.com/?q=ubuntu+install+persistence&t=canonical
[15:38] <Annoyed> Perhaps. Did they make any changes that would require a change in config files?
[15:38] <lotuspsychje> Annoyed: also the #samba channel might know what this is about?
[15:39] <yabba_> ioria, thanks
[15:39] <OerHeks> tats_, that way you would have a persistent document folder, installed apps are not saved, just in memory. install to an usb device from that usb device (as a real install) and you can do whatever you want, lik
[15:39] <ioria> yabba_, you're welcome
[15:39] <tats_> ducasse, ok but bekks recommended NOT to use the "https://wiki.ubuntu.com/LiveUsbPendrivePersistent"
[15:40] <Annoyed> lotuspsychje: I'm in that channel now, and posted the same question. Only response was someone who apparently has problems too
[15:40] <rubiksmomo> Any ideas what else I could do to get my Nvidia driver working? It just switches back to Intel on login even if I select Nvidia from prime settings.  http://ubuntuforums.org/showthread.php?t=2323687
[15:40] <tats_> OerHeks, "install to an usb device from that usb device (as a real install)": Ok that's probably what I want but I am confused on how I am supposed to do this?
[15:40] <ioria> lotuspsychje, something weird really happed with samba ... the win share asks me for password when i set it without it ... but it works read/write
[15:41] <ducasse> tats_: just run the installer and install to a usb stick, not a hard drive
[15:42] <MonkeyDust> elosz  virtualbox? it has its own channel
[15:42] <curlyears> *gads* this user interface is really strange...in hexchat)
[15:43] <elosz> MonkeyDust: yeah just found. I thought since all machines are ubuntu, maybe this channel could help
[15:43] <lotuspsychje> rubiksmomo: try 16.04 for newer gtx cards + nvidia-prime + latest 364 driver from ubuntu ppa
[15:43] <lotuspsychje> ioria: there some new security holes patched, perhaps related?
[15:44] <ioria> lotuspsychje, i'm sure about it ;)
[15:44] <curlyears> say, that reminds me, I have a 16.04 desktop LTS versino of the iso, but I am having difficulty bburnig it to a DVD
[15:44] <curlyears> the difficulties, of course, have nothing to do with it being 16.04
[15:45] <naftilos76> Hi everyone, is there a way to install a package and force skip configuring like mysql which in a terminal asks for a root password. Is there an option ?
[15:45] <Annoyed> Mine is set to allow access w/out passwords as well, as the only interface samba listens on is the inside interface. it can't be accessed from the internet
[15:45] <ioria> rubiksmomo, so, you can still try 2 things: reinstall without encryption or try (sig !) the nvidia installer and blacklist nouveau
[15:45] <iulian> rubiksmomo, i think you get it with nvidia-352 now problem is how to switch  http://askubuntu.com/questions/451335/cant-switch-anymore-from-intel-to-nvidia-gpu
[15:46] <curlyears> I jave found "Brasero Disk Burner" on my system, and I've run it witha blank in the drive, but I can't seem to get it to actually burn the damned thing
[15:48] <curlyears> odd question;  what happens if there are multiple .iso files on a DVD?  Does that break things?
[15:48] <lotuspsychje> curlyears: you can burn multiple iso's to 1 usb with multisystem
[15:49] <curlyears> why does everyone refer to making .iso's into USBs/  Doesn't anyone use optical media anymore?
[15:49] <Annoyed> USB's install faster.
[15:49] <k1l_> the 90's called, they want their optical drives back ;p
[15:49] <OerHeks> not everyone refer to that, why do you ask?
[15:50] <Annoyed> And running off USB is faster than off an optical, too
[15:50] <Azus> Annoyed, me i have no dvds
[15:50] <k1l_> curlyears: usb ist most common and not limited to odd small sizes like cd. and you can rewrite them quite often
[15:50] <curlyears> and that reminds me, what do I select in my BIOS Setup for boot device?  USB hard drive, USB CDROM, USB floppy, etc.?
[15:50] <k1l_> + most new laptops (ultrabooks) dont come with dvd drives anymore.
[15:51] <OerHeks> not everyone has a coffeecupholder-tray
[15:51] <ducasse> curlyears: the bios usually has an entry for the optical drive
[15:52] <curlyears> k1l_:  to me, that's odd.  Of course, I didn't like it much when thye stopped installing floppies by default, eithr
[15:52] <Annoyed> lotuspsychje Thanks for the info, I was hoping it's a known issue w/ a known fix.. I really can't afford to spend a lot of time tearing into it. Maybe I'll try purge/re-install, but I suspect there is a config file change which will take a long time to find.
[15:52] <curlyears> ducasse:  mine doesn't seem to
[15:53] <ducasse> curlyears: not under hard drives either?
[15:53] <curlyears> but again, how do I burn a DVD?
[15:53] <lotuspsychje> Annoyed: try a specific channel perhaps #samba or even #ubuntu-server they might have the same issues recently?
[15:53] <MyFriend> Hi, I know it's somewhat of an unrelated question but I am on ubuntu after all and using linux compatible software, I need to change the password on my router and I remember someone helped me do that once from chrome, does anyone know I can do this? thanks
[15:54] <ducasse> curlyears: k3b is ok for burning, or xfburn if you want something small and lean
[15:54] <Annoyed> I didn't get any response from #Samba, maybe I'll try #ubuntu-server later, but I gotta get going now. Thanks again
[15:54] <a40ntistos> Hello everyone,I've bought a Dell Inspiron with Ubuntu out of the box, If I will replace the hdd inside with an SSD will be an issue or I will have isues after?
[15:54] <curlyears> zMyFriend:  can you remember the old password?
[15:54] <OerHeks> MyFriend, read to router manual, or ask in ##hardware as it is not ubuntu related
[15:54] <lotuspsychje> a40ntistos: wich ssd did you choose?
[15:55] <a40ntistos> lotuspsychje: samsung 850
[15:55] <lotuspsychje> a40ntistos: good choice, make sure your bios is set from IDE to AHCI (if its not already)
[15:56] <ducasse> a40ntistos: probably not, but my hp only detects drives with hp part numbers
[15:56] <OerHeks> if it had ubuntu on it, bios is set correct.
[15:56] <prometheus> Hi.
[15:56] <lotuspsychje> a40ntistos: ubuntu 14.04 and higher has auto trim also
[15:56] <Guest1700> Hello.
[15:56] <a40ntistos> So I will replace the disk and then boot from a usb stick?
[15:56] <curlyears> why are there so many users with nicks like Guest#####?
[15:56] <a40ntistos> is that correct?
[15:57] <lotuspsychje> a40ntistos: yes
[15:57] <Guest1700> Apparently I weren't in time for the nickname. haha
[15:57] <curlyears> how about Brasero?
[15:57] <Guest1700> I was trying to find a decent IRC chat. :/
[15:57] <Guest1700> Obviously this is for help.
[15:57] <k1l_> !ot | Guest1700
[15:57] <ducasse> lotuspsychje: isn't trim disabled on samsung 8xx?
[15:58] <curlyears> Guest1700:   f9r help on what, from where?
[15:58] <lotuspsychje> ducasse: i dont think so, TRIM is from Os right
[15:58] <lotuspsychje> !trim
[15:59] <ducasse> lotuspsychje: no, the kernel disables trim on a number of blacklisted drives, among them samsung 8xx due to firmware problems.
[15:59] <curlyears> I blew an opportunity to buy a 960GB SSD for $247 late lkast year  )-:
[16:00] <lotuspsychje> ducasse: in wich file should i find this, i have the 850 pro also?
[16:00] <a40ntistos> lotuspsychje: you think also that Samsung 850 was a good choice? Is not the pro version though
[16:01] <ducasse> lotuspsychje: it's in the kernel source somewhere, there are plenty of references to the actual file online
[16:01] <lotuspsychje> a40ntistos: well lets not discuss that here mate, there is ##hardware if you like
[16:01] <curlyears> *sigh*
[16:02] <ducasse> lotuspsychje: there were problems with data loss or corruption on those drives when trim waas enabled, so the kernel blacklists it.
[16:03] <lotuspsychje> ducasse: lemme research that, tnx for the hint
[16:03] <ducasse> lotuspsychje: np.
[16:04] <Industrial> Is there a way to make a program for linux that while I have it running, when I press one key (say "`") it toggles a loop that every 100 milliseconds "presses" the 1 2 3 4 5 6 keys for me, until I press ` again and it's off?
[16:05] <ducasse> Industrial: can you code?
[16:05] <vooze> When installing 16.04 I had secure boot on, I said It wont disable secure boot for some drivers and thats fine. But now, no mater what if I turn secure boot on or off in BIOS on my laptop. It says "insecure booting" how do I go back to manage it myself in bios ?
[16:05] <vooze> it would disable *
[16:05] <Industrial> ducasse: Yes, but not C.
[16:06] <lotuspsychje> ducasse: my weekly cron is set to: /sbin/fstrim --all || true also hdparm shows Data Set Management TRIM supported (limit 8 blocks)
[16:07] <ducasse> lotuspsychje: yes, but when you actually *run* fstrim, it returns really quickly, it doesn't actually perform the trim operations :)
[16:07]  * ducasse has 850 evo
[16:08] <bekks> tats_: Boot the install CD, plugin an USB, install to the USB.
[16:09] <lotuspsychje> ducasse: lotuspsychje@RooTBooK:~$ sudo fstrim -v /
[16:09] <lotuspsychje> ducasse: ./: 76,4 GiB (82029690880 bytes) trimmed
[16:10] <ducasse> lotuspsychje: the kernel doesn't actually do it, is what i'm saying (or trying to)
[16:10] <ducasse> lotuspsychje: mine behaves just the same
[16:12] <lotuspsychje> ducasse: is this the same on all kernels?
[16:13] <frostschutz> ducasse, it doesn't necessarily disable trim entirely, just NCQ (queued trim) which is problematic on some drives...
[16:14] <frostschutz> (unqueued) trim still works fine for these drives
[16:15] <ducasse> lotuspsychje: https://linux.slashdot.org/story/15/06/16/201217/trim-and-linux-tread-cautiously-and-keep-backups-handy
[16:15] <lotuspsychje> ducasse: tnx lemme check
[16:15] <ducasse> frostschutz: that's not how the zfs people put it, i don't know enough to say one way or the other
[16:17] <curlyears> *whew*  I had to re-d/lthe 16.04 desktop iso, it seems to have disappeared offf my drive (stupid computer gremlins.  see if I leave THEM any cookies and milk!
[16:18] <curlyears> I am trying hexchat, but there are someproblems.  I can't seem to find the output from my /whois commands, for example
[16:19]  * bekks hands some cookies to curlyears' gremlins, right after midnight. :P
[16:19] <curlyears> aw, bekks...I thought we were BUDDIES!!!!
[16:19] <frostschutz> ducasse, http://paste.ubuntu.com/16283087/ relevant code from libata-core.c, the SupserSSpeed is blocked trim entire, the others just don't queue trim
[16:20] <bekks> curlyears: You should be thankful I didnt pass you some Trebbles :P
[16:21] <lotuspsychje> frostschutz: nice find
[16:21] <bekks> curlyears: And why not seing your own /whois information problematic?
[16:22] <Quoc> hello
[16:23] <nes> hello
[16:24] <LaserAllan> hey, is there any altenrative to Winrar on Linux?
[16:24] <LaserAllan> Or could i run it in WINE?
[16:24] <lotuspsychje> !info rar | LaserAllan
[16:24] <OerHeks> !info unrar
[16:24] <OerHeks> avoid .rar
[16:24] <LaserAllan> So I have to pay for those then?=)
[16:24] <LaserAllan> Well thanks anyway
[16:25] <OerHeks> non-free means the source code is not available, it is a binairy blob
[16:26] <k1l_> LaserAllan: you dont need to pay. there is unrar support in the repos.
[16:26] <LaserAllan> k1l_: So which do you suggest?=)
[16:28] <xntht> anyone here tried the vocal podcast app on ubuntu?
[16:28] <k1l_> LaserAllan: one that works :) "unrar"
[16:29] <LaserAllan> k1l_: Can it be downlaoded form the repo?, ill check anyway
[16:29] <OerHeks> sudo apt-get install unrar
[16:30] <k1l_> LaserAllan: you dont need to check. you just need to scroll back up. that was already answered :)
[16:30] <lotuspsychje> LaserAllan: or p7zip
[16:32] <xntht> hello?
[16:32] <OerHeks> xntht, likely nobody who reads this, used it.
[16:32] <xntht> ok
[16:32] <OerHeks> xntht, or repeat after some time.
[16:33] <LaserAllan> hmm for some reason it says that unrar is installed but i cant seem to find it when i try to point the rar fiels i have to unrar, i cant find it anywhere
[16:33] <k1l_> LaserAllan: using the gui? file roller?
[16:33] <lotuspsychje> LaserAllan: rightmouse your archive==>unpack here
[16:33] <sandah> howdy does anyone know how to completely remove the gui (x/unity) from 16.04? I had to install using the desktop installer since the server install wouldn't see my disk.
[16:35] <LaserAllan> lotuspsychje: The thing is that these are split into allot of files
[16:35] <LaserAllan> and noi dont have that option
[16:38] <k1l_> LaserAllan: open the .rar or .part1.rar file. that should see and open the rest if its in the same folder
[16:38] <LaserAllan> k1l_: The thing is it says that there isn't a compatible software for it for some weird reason, ive never done these things on linux before
[16:39] <k1l_> LaserAllan: what ubuntu is that exactly?
[16:39] <LaserAllan> k1l_: Ubuntu GNOME
[16:39] <LaserAllan> 1404 LTS
[16:39] <k1l_> LaserAllan: "sudo apt update && sudo apt install unrar" in terminal
[16:40] <LaserAllan> k1l_: It says that unrar is allready installed but i cannot find it anywhere
[16:40] <k1l_> LaserAllan: its not a own program
[16:40] <k1l_> you open the "file-roller" and with installing unrar that can open it
[16:42] <LaserAllan> k1l_: FIleroller?, i am sorry i have never heard that term before:D
[16:42] <JackJones> hey there
[16:42] <k1l_> its the gnome program to open packed archives. it combines all sorts of rar and zip etc.
[16:42] <JackJones> I'm in need to install antivirus / malware remover
[16:42] <OerHeks> !antivirus
[16:43] <JackJones> there is a malware thats intercepting my bitcoin address copying and pasting and I already lost $300 because of this, and I fear it might have also done more damage
[16:43] <ducasse> sandah: you would need to remove a *ton* of packages, would probably be less hassle to figure out why the server image won't work, or try the mini.iso
[16:43] <JackJones> I copy-pasted my password for a website and now I have to change that too OerHeks
[16:43] <JackJones> but first I gotta remove this malware
[16:44] <sandah> OK thanks ducasse I thought there was something simple like remove ubuntu-desktop, but that doesn't seem to work.
[16:44] <ducasse> sandah: no, that's just a meta-package
[16:44] <OerHeks> JackJones, is this on ubuntu?
[16:45] <JackJones> OerHeks, xubuntu, yes.
[16:45] <OerHeks> JackJones, so change password first, according to your brief story someone knows your bitcoin wallet pass
[16:46] <JackJones> so they're not seeing everything I copy paste?
[16:47] <r> oi
[16:47] <MorningDies> hello, which file system should i use in a pen drive i want to use for both linux and windows? fat32?
[16:47] <r> alguem ai ?
[16:47] <ducasse> sandah: you could try tasksel
[16:47] <Guest58792> hey guys
[16:47] <OerHeks> JackJones, unlikely, but you can clean your browser history/cookies too , or maybe better remove the .config folder, that removes plugins too, maybe one of them is the culprit.
[16:48] <OerHeks> MorningDies, fat32 ( with 4gb file limit) or ntfs
[16:48] <JackJones> no I wasn't using a web wallet I'm using electrum OerHeks
[16:48] <JackJones> OerHeks,  and its changing whatever btc address I copy-paste into something else that has the same first 3 characters
[16:48] <OerHeks> JackJones, good, then i think you are fine with just the pass change. use clamav after that.
[16:49] <MorningDies> OerHeks: i was told NTFS isn't supported by linux (?)
[16:49] <LaserAllan> k1l_: Lemme see then
[16:49] <LaserAllan> oh you mean archive manager
[16:49] <OerHeks> MorningDies, it is, out of the box.
[16:50] <OerHeks> MorningDies, only the newer exfat needs some tools
[16:51] <MorningDies> So, any downsides of using NTFS everywhere?
[16:51] <bekks> MorningDies: There are no upsides.
[16:51] <MorningDies> Can i safely format all my drives to NTFS?
[16:51] <LaserAllan> k1l_: For some reason when i open it in the roller it is empty, I guess I'll have to use Windows afterall
[16:51] <OerHeks> well, if the drive gets errors in the filesystem, i wouldn't use linux tools to repair them.
[16:52] <MorningDies> Thanks for the answers, guys
[16:53] <y014> Hi, could someone point me in the right direction ? I have AMD CPU with built in graphics onto which I have connected 1st monitor over hdmi. I have also radeon 5 and second monitor is attached to it. Since I am using radeon drivers only second monitor is detected
[16:55] <JackJones> ok thanks OerHeks I changed my passwords for electrum and another forum I logged into
[16:55] <JackJones> the malware got in this past week I think and I restarted earlier
[16:55] <OerHeks> :-)
[16:56] <rajiv1> Whenever i turn my computer on and connect my modem to it, internet in not connected. To connect the internet i have to remove and then reconnect the modem again. This happens whenever i turn the computer on. I don't know what is the problem ,anybody please help. I am using huawei e8231.
[16:56] <rajiv1>  
[16:56] <JackJones> eletrum was working fine until after the restart
[16:56] <ducasse> JackJones: see if your bitcoin wallet has two-factor auth
[16:56] <rajiv1> what is ntpd
[16:56] <curlyears> OK...I found xfburn in my Software Center.  INstalled it, ra it.  It complained no driv3e was available.  I looked at the sidebar, and sure enough my optical drive was there listedas being held busy by xfburn. So I unmounted it, and ran xfburn again
[16:57] <ducasse> rajiv1: network time protocol daemon
[16:57] <bekks> rajiv1: Network Time Protocol Daemon.
[16:57] <curlyears> xfburn immediately complained no optical drive was available. I don't get i
[16:57] <JackJones> well I was receiving some coins when I got robbed by it but uhh yeah perhaps I should look into implementing two-factor auth
[16:57] <ducasse> curlyears: you might need to have a blank disk in the drive
[16:57] <RyedDorkeen> Hi I am interest in buying a new 15" laptop from Amazon and loading Ubuntu on it. Something with 8gb of ram and 1tb of hd. Does anyone know of any laptops in the $450-$600 range?
[16:58] <Johnny_Linux> asus
[16:58] <rajiv1> bekks: whenever i turn my computer on ntpd crashes? why is this happening?
[16:58] <RyedDorkeen> Or where I can find a place that can make a good recommendation?
[16:58] <bekks> rajiv1: How am I supposed to know? You need to investigate your log files.
[16:58] <ducasse> JackJones: get a yubikey if they support that, i totally love mine.
[16:58] <bekks> rajiv1: :)
[16:58] <rajiv1> bekks: how do i investigate it?
[16:59] <Johnny_Linux> RyedDorkeen:  check for maybe asus with intel + intel or nvidia graphics
[16:59] <bekks> rajiv1: By looking at the log files, under /var/log/
[16:59] <curlyears> RyedDorkeen, I think yoou might want to check http://tigerdirect.com as well.   THey often have sweet deals at reasonable prices
[16:59] <OerHeks> !hcl
[17:00] <ducasse> Johnny_Linux: +1 on as many intel parts as possible
[17:01]  * curlyears prefers AMD procesors
[17:02] <curlyears> RyedDorkeen, I think yoou might want to check http://tigerdirect.com as well.   THey often have sweet deals at reasonable prices
[17:02] <bekks> curlyears: They have better avionic characteristics. For IT, I'd use Intel. :)
[17:03] <beatmeat> bekks: any reason why? or just blind loyalty.
[17:03] <curlyears> bekks:  I am not i n "IT."  I am a retired software engineer, getting into 3D printing, and using my computer as a hobby
[17:04] <RyedDorkeen> I recently failed. Purchad a lenovo ideapad that does not even have expermental support for the broadcom wifi chipset. I just dont want to fail again, and anything newer seems to have a lack of reviews. Somethimes even a lack of exact model number.
[17:04] <shark> bonjour des francais ?
[17:04] <bekks> beatmeat: Experience. Weird crashes on AMD driven blades, which turned out to be some differences compared to Intel.
[17:04] <MonkeyDust> !fr
[17:04] <Johnny_Linux> RyedDorkeen:  atheros works pretty good
[17:08] <curlyears> howdy raspberrypifan!
[17:08] <curlyears> raspberrypifan, I just recieved my Pi3 two days ago
[17:08] <curlyears> I need to get a ds card so I can put Noobs on it any play with it
[17:10]  * Xark prefers micro-SD cards. :)
[17:11] <curlyears> oops,  I actually meant SD, xarx.  Thanks for catching my error
[17:11] <OerHeks> rpi too, but this is getting offtopic
[17:11] <OerHeks> !ot
[17:12] <curlyears> I had/have a64GB moicroSD somewhere, but I can't find the damned thing.  It's so damned small, it could easily have fallen on floor and gotten swept up.
[17:12] <OerHeks> curlyears, please, 99% off your comments are non support related
[17:13] <curlyears> OerHeks:  You are reight, I do go off-topic too much, but 99% is a grss exaggeration
[17:13] <Xark> Hello.  Is there a fix/workaround for the fact that the Ubuntu 16.04 grub loader scrambles my screen when selecting windows?  Like can I make grub not set graphics mode and just use text screen?
[17:13] <curlyears> oerHeks:  may I PM you?
[17:14] <Xark> curlyears: You are aware of #raspberrypi?
[17:15] <curlyears> Xarx:   I am, thank you
[17:15] <a40ntistos> i've added the ssd on the laptop, on the installation type menu what option to choose? Erase disk and Install Ubuntu?
[17:15] <ducasse> a40ntistos: yep
[17:15] <OerHeks> Xark, with what GPU?
[17:16] <curlyears> a40ntistos, my as well erase disk, just to vbe certain theres nothiung on ther
[17:16] <Xark> OerHeks: This is Skylake with Intel HD.  Windows is fine once it boots, but scrambled during the load (which can be a bit when unsuspending).
[17:16] <a40ntistos> curlyears: i've just added on the laptop so is empty
[17:16] <curlyears> s/my/may/\
[17:16] <Xark> OerHeks: (Dell Inspiron 15)
[17:17] <curlyears> OerHeks, may I PM you?
[17:18] <curlyears> I don't like the hexchat client as much as I liked irssi
[17:18] <OerHeks> curlyears, no, i give support only.
[17:18] <OerHeks> Xark,  so ubuntu boots fine, but windows messes up?
[17:18] <curlyears> Oerheks:   alright
[17:19] <C0r3> How to install vim on ubuntu 16.04 from the source code. I checked there website and it said to clone the repository and cd in vim/src and make. But that failed. It says 'You need to install a terminal library; for example ncurses'
[17:19] <keonkim-> hello, I am having a problem connecting my ubuntu 16.01 to a blutooth mouse. Setting up blutooth seems to work but I cannot control anything with the mouse. here is my log (http://paste.ubuntu.com/16284564/). It seems Blutooth breaks down on "Bluetooth: hci0: Waiting for firmware download to complete" step. Could someone please help me to fix this problem?
[17:19] <OerHeks> i found this post working for ubuntu / skylake, intel_pstate=no_hwp >> http://askubuntu.com/questions/723166/cant-install-ubuntu-on-new-skylake-ultrabook-thinkpad-yoga-260 not your hardware, but still..
[17:20] <curlyears> c0r3;  then install ncurses and try again
[17:20] <ducasse> C0r3: you need to find out what the dependencies are and install them. might be documented in the github repo.
[17:20] <nick_name_123451> I am trying to build unity on ubuntu 14.04 and running remake-unity says I am still missing dependencies
[17:21] <nedstark> C0r3,  you need to install the development environment,  sudo apt-get install libncurses5-dev libgnome2-dev libgnomeui-dev libgtk2.0-dev libatk1.0-dev libbonoboui2-dev libcairo2-dev libx11-dev libxpm-dev libxt-dev python-dev ruby-dev git
[17:22] <keonkim-> here is my dmesg | grep Bluetooth result > dmesg | grep Bluetooth
[17:22] <keonkim-> oops here > http://paste.ubuntu.com/16284642/
[17:23] <curlyears> looks like you have some sort of security issue, keonkim
[17:24] <andropov> Ubuntu 14.04 has been freezing on the login screen, and doesn't accept input from either the mouse or keyboard. In order to get it to work, I need to restart several times. What could be causing this?
[17:24] <nedstark> keonkim-, this may be related to an open bug https://bugzilla.kernel.org/show_bug.cgi?id=104011
[17:25] <curlyears> well, if restarting several times clears the probem, it sounds to me like you have uunstable hardware issues
[17:25] <andropov> So I need to replace the mouse and keyboard?
[17:26] <ducasse> andropov: try running memtest overnight
[17:26] <curlyears> andropov:  it could be mpouse or keyboard, it could be USB port, it could be a flakey RAN.  Hard to say from here
[17:26] <ioria> andropov, how old is you hhd ?
[17:26] <bekks> andropov: Did you check mouse/kb on another computer?
[17:27] <curlyears> s/RAN/RAM/
[17:27] <Xark> OerHeks: Yes, just the "boot animation" so it is not critical, but it is annoying.
[17:27] <ducasse> andropov: could also be an unstable power supply
[17:27] <keonkim-> nedstark: thanks! but how do I solve this problem as stated here? I am a complete noob :(
[17:27] <andropov> I have used the mouse and keyboard sucessfully on another keyboard. Switching the USB port they are plugged in to does not help. I will try memtest.
[17:28] <bekks> andropov: Did you rule out mouse and kb are broken by testing them on another computer?
[17:28] <curlyears> it cou;d be ;iterally anything in or connected to his computer
[17:28] <andropov> bekks: yes
[17:28] <nedstark> keonkim-, what kind of hardware are you using?
[17:29] <mkt> -e
[17:29] <ioria> andropov, dmesg | grep "SATA link down"
[17:30] <keonkim> nedstark: I am using lenovo U31 with microsoft bt mouse.
[17:30] <nedstark> keonkim, you might try using a bluetooth dongle instead of the built-in bt
[17:30] <nedstark> the bug is related to lenovo hardware
[17:31] <andropov> ioria: I get no output what I enter that command
[17:31] <nedstark> arch has a similar problem https://bugs.archlinux.org/task/46006
[17:31] <ioria> andropov, oh, ok
[17:31] <keonkim> nedstark: damn :( but I have been using it very long time and suddenly doesnt work after I upgraded to ubuntu 16.01
[17:32] <nedstark> keonkim, yes, probably.  there are other things that broke too
[17:32] <xntht> 16.01?
[17:32] <nedstark> 16.04.04 will make ubuntu great again
[17:32] <keonkim> oh I mean 16.04
[17:33] <symm-> hi, what irc client should I install on ubuntu?
[17:33] <keonkim> nedstark: damn lenovo... you are right, the symptoms are the same.
[17:33] <keonkim> nedstark: thanks for helping
[17:33] <nedstark> lenovo has more issues than normal with linux, and new distros always have issues
[17:34] <andropov> symm: xchat
[17:34] <keonkim> nedstark: does these kind of problems usually get fixed?
[17:34] <nedstark> you really want to wait about 6 months after release to upgrade your system unless you want to help bug fix
[17:34] <nedstark> yes eventually
[17:34] <symm-> andropov: thanks, will do that... but iirc there was a console-based client? I forget the name
[17:35] <keonkim> nedstark: got it.
[17:35] <andropov> symm-: irssi might be what you are thinking of
[17:35] <symm-> ah, right right! that one, thanks
[17:35] <keonkim> nedstark: thanks for helping :)
[17:35] <nedstark> you're welcome
[17:35] <ducasse> symm-: weechat is really nice
[17:35] <DJones> symm-: hexchat or irssi (for command line) Ignore suggestions for xchat, its not been updated for years and has been dropped from the ubunto repositories
[17:35] <symm-> I want to get a taste of "unixness" (windows user)
[17:35] <symm-> so.. command line :)
[17:36] <mkt> ^list
[17:36] <ducasse> symm-: weechat is command line, but has gui's available
[17:36] <symm-> hmm, I see
[17:36] <andropov> symm-: if you want to do more stuff in the terminal, try lynx, a text based browser
[17:36] <mkt> !list
[17:36] <Tegu> or links
[17:36] <JackJones> can .exe files infect ubunut/linux ?
[17:37] <mkt> 1bot
[17:37] <mkt> !bot
[17:37] <ducasse> symm-: recently switched to weechat running in tmux, it's the nicest client i know
[17:37] <nedstark> JackJones, if you're using wine or another windows emulator
[17:37] <JackJones> and if you're not?
[17:37] <JackJones> there's no way they can work, right?
[17:37] <JackJones> nedstark
[17:37] <ducasse> JackJones: no
[17:37] <nedstark> JackJones, then it can only affect windows systems that touch those files
[17:37] <symm-> ducasse: thanks for the recommendation!
[17:38] <nedstark> like if you're sharing the same hd between 2 os's
[17:38] <dreamcat4> hi i have a question about casper: why hasnt anybody improved it in ages? it could do with better options for persistence
[17:38] <dreamcat4> its stayed the same for years
[17:38] <ducasse> symm-: np. there are plenty of guides to getting started with it online, start at weechat.org
[17:38] <JackJones> well my virus scan only found a bad .exe file
[17:38] <JackJones> didn't find anything else
[17:39] <JackJones> this must be some sophisticated bitcoin stealer in my system
[17:43] <JackJones> wow, but now that clamAv is running... the copy-pasting of wallet addresses is working normally
[17:45] <fedoen> Hi, I just removed all I could find about bluetooth: bluez, bluetooth, blueman. What to install to get a2dp bluetooth headset working on 16.04?!? I've been strugling with this for quite a while now.
[17:47] <MonkeyDust> fedoen  guess you removed everything to make it work
[17:48] <MonkeyDust> or that can make it work
[17:48] <UbuntuDude> Is it possible to make Esc button behave on ubuntu the same behavior in windows in terms of closing dialogs and popup windows?
[17:48] <fedoen> MonkeyDust:  I know, wich one should I bring back to make it work?
[17:49] <MonkeyDust> UbuntuDude  start here http://askubuntu.com/questions/254424/how-can-i-change-what-keys-on-my-keyboard-do-how-can-i-create-custom-keyboard
[17:49] <MonkeyDust> fedoen  try them one at a time
[17:49] <fedoen> MonkeyDust: I had blueman and bluetooth and bluez up and headset working until first disconnect, after that I coldn't get it back working again
[17:50] <fedoen> MonkeyDust: not sure where to dig, on bluetooth or pulseaudio
[17:51] <fedoen> MonkeyDust:  I had my share of fun with both, either working when selecting a2dp from blueman or from pulseaudio, either not working at all...
[17:51] <mkt> ciao
[17:53] <MonkeyDust> fedoen  what's a2dp?
[17:53] <fedoen> MonkeyDust: but this is bothering now, after 2 weeks on 16.04 I can't get my headset working on a daily basis, I had my share of trouble on 15.10, but once I got it working they would work "forever"
[17:53] <JackJones> can someone who's a linux guru install a keylogger on your system in about 15-20 minutes... even though you locked the screen and have a strong password and walked away
[17:54] <fedoen> MonkeyDust: not really sure, it's a mode for headset - a2dp_sink
[17:54] <JackJones> I haven't touched the root user since installing the OS... and it was disabled the last time I checked
[17:54] <MonkeyDust> JackJones  yes, root is disabled by default, in ubuntu
[17:54] <bekks> JackJones: Getting physical access is just one attack vector. One of a lot.
[17:54] <JackJones> wow
[17:55] <JackJones> su should give me an error if root user is disabled
[17:55] <JackJones> right?
[17:55] <ducasse> do any of the quality gaming mice with many buttons work well with ubuntu? (work well as in send events that can be configured without windows software)
[17:55] <fedoen> brb
[17:55] <bekks> JackJones: Not necessarily.
[17:55] <JackJones> I think last time it gave me an error
[17:55] <JackJones> a month ago or so
[17:56] <JackJones> omg... there's no way my friend would this, can you please help me, how do I check if root user is enabled or disabled
[17:57] <MonkeyDust> JackJones  if you havent enabled it, it's disabled
 can someone who's a linux guru install a keylogger on your system in about 15-20 minutes... even though you locked the screen and have a strong password and walked away
[17:57] <ducasse> JackJones: someone with physical access can do *anything*
[17:57] <akik> JackJones: sudo passwd -S root
[17:57] <JackJones> are there other ways to obtain my electrum password without a keylogger?
[17:57] <symm-> if I installed zsh and used `chsh -s /bin/zsh`, will zsh now always run when I open a terminal?
[17:58] <MonkeyDust> symm-  what happens when you try?
[17:58] <akik> JackJones: read the man page of passwd to see what that means
[17:58] <symm-> MonkeyDust: I can't tell what zsh looks like
[17:59] <MonkeyDust> symm-  type this   env | grep SHELL
[17:59] <symm-> it just gives me a prompt and a blinking cursor :)
[17:59] <symm-> ok, will do in a sec... on my other machine atm
[17:59] <JackJones> L
[17:59] <JackJones> so its locked I guess
[18:00] <curlyears> cul8r
[18:01] <mkt> !list
[18:01] <mkt> !bot
[18:02] <JackJones> akik, inactivity period is -1
[18:02] <fedoen> back
[18:03] <JackJones> well I did change my eletrum password too
[18:03] <fedoen> MonkeyDust: a2dp_sink is a stereo mode for headset, it has another mode for phone headset wich is mono, that one connects sometimes to the computer too
[18:03] <JackJones> I think that has to be what affected the malware
[18:03] <JackJones> not the clamAv
[18:04] <MonkeyDust> malware? exciting!
[18:04] <MonkeyDust> JackJones  what kind of malware?
[18:04] <ducasse> JackJones: the odds of your ubuntu installation having malware are pretty low.
[18:04] <JackJones> MonkeyDust, btc address changer
[18:04] <JackJones> aka btc stealer
[18:05] <MonkeyDust> JackJones  source of it being malware?
[18:05] <JackJones> ducasse, then how were my copy-pasted addresses being magically manipulated and I got robbed
[18:05] <arunangshu> hi all
[18:06] <ducasse> JackJones: i don't know, malicious JS injected in your browser session, maybe.
[18:06] <JackJones> it was happening from electrum to IRC and to pidgeon
[18:06] <JackJones> pidgin*
[18:06] <Ben64> JackJones: what was happening exactly
[18:06] <JackJones> was getting payment and the thieves got the transaction, my partial salary those ****
[18:07] <MonkeyDust> JackJones  you lost me too, what was your initial question?
[18:07] <JackJones> MonkeyDust, first and foremost I was trying to get an antivirus and anti-malware to remove whatever is in my system (the bitcoin stealer)
[18:08] <MonkeyDust> !av
[18:08] <ducasse> JackJones: there isn't really any such thing for linux
[18:08] <JackJones> whenever I was copying an address from electrum and pasting it to IRC or anywhere else it was being changed except for the first 3 characters... and I usually triple check too but I was being rushed by my employer
[18:08] <MonkeyDust> JackJones  what's electrum?
[18:08] <JackJones> a bitcoin wallet software
[18:09] <JackJones> oerheks was helping me but he/she left
[18:09] <JackJones> told me to first change my password because he/she thought someone had it, and then scan the system with clamAv
[18:09] <JackJones> I did it in that order and now my copy-pasting is working normally again...
[18:10] <tgm4883> JackJones: ok, so then what is the question now?
[18:10] <Ben64> it's much more likely that you cimply copied the wrong address
[18:10] <JackJones> but still, even if someone had my electrum passwd how did they get it?
[18:10] <Ben64> simply*
[18:10] <mkt135> qualcuno mi spiega come funziona ??
[18:10] <JackJones> Ben64, I tested it with multiple copy-pasting and yeah it was a btc stealer of some sort
[18:10] <MonkeyDust> !it
[18:11] <Ben64> JackJones: doubt it
[18:11] <JackJones> maybe I'll try changing the passwd back to the old one and see what happens hahaha
[18:12] <kolobyte> how sweet is the 16.04 bg
[18:12] <kolobyte> compared to 14.04
[18:12] <Ben64> so theres a program that waits around for you to put a btc address into the clipboard, and modifies it, but it needs your password? no
[18:14] <tgm4883> Ben64: crazy thought, but programs can do more than one thing. eg. monitoring your clipboard for address AND hoping to get a password so it can get into your BTC wallet
[18:14] <fedoen> going to reboot, reinstalled blueman witch worked at some point
[18:15] <tvtonight> Anyone have any issues installing Virtualbox on Ubuntu Gnome 16.04. Getting kernel errors
[18:15] <bekks> tvtonight: Works fine here. Which errors do you get?
[18:16] <JackJones> Ben64 MonkeyDust ducasse, so finally, can a linux guru, very very proficient in it, and with physical access to your system, unlock your session even though you have it locked.
[18:16] <tvtonight> Exit Code 1 Result Code: NS_ERROR_FAILURE (0x80004005)
[18:16] <ducasse> JackJones: we've answered that
[18:17] <MonkeyDust> tvtonight  paste this in a terminal, then try again ... sudo apt-get install dkms; sudo modprobe vboxdrv;sudo modprobe vboxnetflt
[18:17] <JackJones> oh fuck
[18:17] <JackJones> its back to doing that again
[18:17] <MonkeyDust> JackJones  language
[18:17] <JackJones> sorry for the foul language
[18:18] <JackJones> OMG
[18:18] <JackJones> can I record video of what I'm doing and show you, thats the only way you'll believe me
[18:18] <tgm4883> sure
[18:18] <MonkeyDust> JackJones  with byzanz
[18:19] <tvtonight> MonkeyDust: dkms is already installed, both the modprobe commands return an error.  The "Required key is not available"
[18:19] <Derik> hello
[18:19] <ducasse> tvtonight: disable secure boot
[18:20] <tvtonight> I'm fairly certain I've already done that, at the install stage.  But I will try again.  I shall be back
[18:21] <CenZo> Yayy
[18:21] <Derik> Anyone got some .onion's?
[18:21] <Derik> Msg me if u do
[18:22] <CenZo> ooo
[18:22] <kolobyte> foo.onion
[18:22] <kolobyte> bar.onion
[18:22] <kolobyte> that'll be 1btc
[18:22] <Derik> Lol
[18:22] <JackJones> err, sorry, this time it was a mistake from me because I'm on the edge a bit stressed out, my apologies friends.
[18:23] <Derik> Whats the bitcoin wallet address
[18:24] <fedoen> I reinstalled blueman, reconnected my headset on audiosink (got some errors there), than used pulseaudio volume control to connect to A2DP Sink, now I get HQ sound on my headset, I hope it lasts...
[18:24] <kolobyte> JHAJhk8u92089089AJKhj1-0=1KLAJaklailg90Q()A@HghjkKJA
[18:24] <guamaboy> https://twistedmatrix.com/
[18:24] <vijaikumar> why is ubuntu 16.04 failing to show applications that are installed using dpkg in dash ?
[18:25] <Derik> Lol
[18:25] <guamaboy> sorry..didnt mean to send that
[18:25] <guamaboy> So.... does anyone know where i can find some free netflix accounts
[18:25] <tgm4883> guamaboy: go pay for one
[18:25] <bytefire> hey guys
[18:26] <bytefire> what's a good tool to recovera deleted file on ubuntu?
[18:26] <Derik> The silk road m8
[18:26] <fedoen> so for all of you that didn't get bluetooth heaset from Santa, try classic, corded headset
[18:27] <tvtonight> disabling secure boot in bios worked.  Thankyou very much
[18:28] <guamaboy> do you know how to unlock a UEFI
[18:28] <ducasse> tvtonight: no problem. you can also create certs/MOK's, install them and sign the modules yourself.
[18:28] <stratum> tvtonight, ubuntus grub is supposed to be compatible with secure boot as shim is signed with MSFTs key
[18:29] <ducasse> stratum: that's not the problem here.
[18:29] <stratum> tvtonight, do look out for "intel rapid start" though
[18:29] <stratum> k, k
[18:31] <beowulf1> Having issues with gettings high resolutions via displayport on 16.04. (been googling and trying stuff for hours). Live-cd
[18:31] <Kurogane> hey guys i have a question, i just notice i have a problem with my official repo, previous i have ubuntu 12.04 now i have "ubuntu 14.04" lsb_release -sc say trusty but for long time i have using source.list repo from 12.04 :\ . My question is, only changing the repo url from trusty is will ok or i need to so something else?
[18:34] <BluesKaj> Kurogane, what do the deb lines in your sources.list show ? precise or trusty?
[18:34] <nedstark> Kurogane, https://www.linode.com/docs/security/upgrading/how-to-upgrade-to-ubuntu-14-04-lts
[18:35] <nedstark> this one's better http://www.omgubuntu.co.uk/2014/04/upgrade-ubuntu-14-04-12-04
[18:35] <nedstark> the earlier 1 had extra crap in it
[18:35] <BrAsS_mOnKeY> hello
[18:36] <BrAsS_mOnKeY> So i installed ubuntu on virtualbox but cannot seem to get wifi on wireshark
[18:36] <BrAsS_mOnKeY> my host is win 10
[18:36] <Kurogane> Blue1, precise with ubuntu 14.04  :\
[18:38] <BluesKaj> Kurogane, then you have 14.04 Trusty LTS , update and upgrade then full-upgrade
[18:39] <Kurogane> Blue1, yes but i have sources.list of preciese!
[18:39] <Ben64> Kurogane: pastebin your sources.list
[18:40] <BluesKaj> Kurogane, I asked you what your sources.list said , which is it?
[18:40] <MannyLNJ> why does ls show ls: reading directory .: Input/output error
[18:41] <Ben64> MannyLNJ: bad drive
[18:41] <ducasse> MannyLNJ: or you need to run fsck
[18:42] <MannyLNJ> ducasse, I have to unmount the drive first?  I believe it's formatted as NTFS
[18:42] <ducasse> MannyLNJ: then you need to run chkdsk in windows
[18:43] <MannyLNJ> ducasse, problem then. I converted my windows systesm to virtual ones under ubuntu
[18:44] <BrAsS_mOnKeY> MannyLNJ, do you use wireshark?
[18:44] <Ben64> BrAsS_mOnKeY: don't ask random people
[18:44] <ducasse> MannyLNJ: then unmount it and pass the drive through to the windows vm
[18:44] <BluesKaj> Kurogane, what does, lsb_release -a,  output?
[18:44] <BrAsS_mOnKeY> Ben64, ok.
[18:45] <MannyLNJ> BrAsS_mOnKeY, No I don't
[18:45] <BrAsS_mOnKeY> MannyLNJ, ok, thanks.
[18:46] <BrAsS_mOnKeY> anyone use wireshark?
[18:46] <ducasse> BrAsS_mOnKeY: do you give the ubuntu vm direct access to the wifi adapter?
[18:46] <OerHeks> BrAsS_mOnKeY, and if someone does, what would be your support question?
[18:47] <BrAsS_mOnKeY> ducasse, i think so.
[18:47] <ducasse> BrAsS_mOnKeY: check. you need to.
[18:47] <BrAsS_mOnKeY> ducasse, not sure if settings are correct.
[18:47] <Kurogane> Ben64, http://pastie.org/private/uvsjovddmxheocvkcxtvxq
[18:47] <ducasse> BrAsS_mOnKeY: usb wifi adapter?
[18:48] <BrAsS_mOnKeY> OerHeks, trying to use wireshark on ubuntu vm
[18:48] <BrAsS_mOnKeY> ducasse, no, board.
[18:48] <BrAsS_mOnKeY> card
[18:49] <ducasse> BrAsS_mOnKeY: you need to pass it through to the vm, if vbox can do that, so ubuntu sees it as a pci device.
[18:49] <OerHeks> BrAsS_mOnKeY, "Whether you will be able to capture in monitor mode depends on the card and driver you're using. " https://wiki.wireshark.org/CaptureSetup/WLAN#Linux
[18:49] <OerHeks> and from a VM .. goodluck
[18:50] <zykotick9> OerHeks: +1
[18:50] <beowulf1> 16.04 doesnt seem to detect my displayport connection. xrandr output has one entry: screen 0. What am i doiing wrong?
[18:50] <BrAsS_mOnKeY> i have it as bridged on vbox network settings
[18:50] <ducasse> BrAsS_mOnKeY: that will not work.
[18:51] <ducasse> BrAsS_mOnKeY: i doubt you'll be able to get this working, but you're welcome to prove me wrong :)
[18:52] <BrAsS_mOnKeY> well.. i thought that was the whole point of having wireshark through ubuntu vm
[18:52] <BrAsS_mOnKeY> because windows cant use wifi data
[18:52] <BrAsS_mOnKeY> but linux can.
[18:52] <ktbanb> I need help with sound on my ubuntu 16.04 install.
[18:52] <SchrodingersScat> !sound | ktbanb
[18:53] <ducasse> BrAsS_mOnKeY: wireshark needs to access the driver on a very low level, it needs complete access to the device.
[18:54] <BrAsS_mOnKeY> do i need to go to my host wlan card settings?
[18:54] <BrAsS_mOnKeY> i did notice one setting unchecked maybe it will help
[18:54] <ducasse> BrAsS_mOnKeY: you should run ubuntu natively, that will be much easier.
[18:55] <BrAsS_mOnKeY> microsoft network multiplex protocol is unchecked
[18:55] <ducasse> BrAsS_mOnKeY: doesn't matter.
[18:55] <BrAsS_mOnKeY> as well as LLDP protocol driver
[18:55] <BrAsS_mOnKeY> ok
[18:56] <BrAsS_mOnKeY> i think it might help to be a guest instead of a host on the ubuntu system
[18:57] <BrAsS_mOnKeY> ducasse, the thing is, the omputer has to be windows.
[18:57] <BrAsS_mOnKeY> computer*
[18:57] <OerHeks> i would check if the wifi adapter and driver is suitable for wireshark, if windows does not, m best guess is that linux does not too
[18:57] <ducasse> BrAsS_mOnKeY: then you are probably out of luck.
[18:57] <BrAsS_mOnKeY> there are many topis on the subject
[18:58] <BrAsS_mOnKeY> so it must be able to work.
[18:58] <Kurogane> BluesKaj, http://pastie.org/private/uvsjovddmxheocvkcxtvxq http://pastie.org/private/z6joa5ksnilnurjnvnhjta
[18:58] <buggybug> is there any way to see old crash reports (>14 days old) that apport sent?
[18:58] <BrAsS_mOnKeY> anyway, i have to go
[18:58] <BrAsS_mOnKeY> thanks for your advice, people. :)
[18:58] <BrAsS_mOnKeY> ttyl.
[19:02] <ducasse> buggybug: /var/log/apport.log* ?
[19:03] <jamie_> !Resistance Jason Arnopp - The Last Days of Jack Sparks (mobi).rar
[19:03] <jamie_> !Resistance Jason Arnopp - The Last Days of Jack Sparks (mobi).rar
[19:03] <OerHeks> jamie_, this is not a filesharing network, stop that please
[19:04] <buggybug> ducasse: I looked there but it only goes back a few weeks. on the wiki it says there's a page I can visit on the ubuntu website that shows all my crash reports, https://wiki.ubuntu.com/ErrorTracker
[19:05] <buggybug> but I don't see those settings in my menu
[19:06] <ducasse> buggybug: never looked into it, sorry. just guessing here.
[19:07] <buggybug> ok. thanks anyway
[19:07] <Bingo> Hi
[19:07] <Bingo> I am reading about Sirius, but it is terminal based
[19:07] <ioria> buggybug, systemsettings -> privacy & security > Show Previous Reports
[19:08] <xangua> I'm laying in bed with my operated foot
[19:08] <Bingo> Any other stuff for ubuntu that is like cort?
[19:08] <ioria> buggybug, systemsettings -> privacy & security > Diagnostic -> Show Previous Reports
[19:09] <buggybug> ioria: I just realized I'm not on the base ubuntu so that's why I'm missing system settings, I'm installing the package now so maybe it will work now
[19:11] <ioria> !info unity-control-center
[19:12] <est31> why is the man page for snap so minimalistic
[19:12] <Bingo> tweak-tool
[19:12] <est31> it doesnt have a description section
[19:13] <beowulf_> having issues getting my displayport to run beyond low res to a DP UHD screen (using nvidia Ti 980). Help needed!
[19:15] <OerHeks> est31, it is in development, man pages are sparse, this is a start https://developer.ubuntu.com/en/snappy/guides/
[19:16] <OerHeks> est31, there is a dedicated channel too, join #snappy
[19:16] <est31> ok
[19:17] <Bingo> So i got to freenode roomd for help about voice  assistants.. no one there
[19:17] <est31> I want to understand what this snappy stuff is... I just know what I read from technews, but thats very sparse
[19:17] <bekks> est31: It is another package management system.
[19:17] <Bingo> api ubuntu .. go fetch
[19:18] <est31> bekks, yeah but for example how is updating managed
[19:18] <est31> apt has repositories
[19:18] <bekks> est31: By installing into a new directory.
[19:18] <est31> and ppas
[19:18] <fernando> hola
[19:18] <bekks> est31: Repositories are needed for snap, too.
[19:18] <est31> are the repositories set system wide
[19:19] <Bingo> aps and programs will be seperate
[19:19] <est31> and will do-release-upgrade disable all repositories that are alien
[19:19] <est31> like its doing with ppas right now
[19:19] <est31> I have lots of questions you see :)
[19:19] <Bingo> me 2
[19:20] <bekks> Bingo: What is the difference between apps and programs?
[19:20] <Bingo> aps are web stuff
[19:20] <OerHeks> est31, key is that snappy is host independant, good start http://www.unixmen.com/snappy-ubuntu-core-an-entirely-new-ubuntu-operating-system-for-clouds-and-devices/ and you better wait for responce in #snappy
[19:21] <bekks> Bingo: So they are programs.
[19:21] <Bingo> the equivalent to activeX
[19:21] <bekks> Bingo: ActiveX is something totally different ;)
[19:21] <Bingo> o?
[19:21] <OerHeks> There is snappy-core and packages to make it more clear.
[19:21] <Bingo> aps in 10 could be on the desktop
[19:22] <bekks> Bingo: "aps in 10"?
[19:22] <Bingo> xp had desktop active x
[19:23] <OerHeks> Mark explained "Snappy-Core provides transactional updates with rigorous application isolation. This is the smallest, safest Ubuntu ever, on devices and on the cloud."
[19:23] <bekks> Bingo: Do you know what activeX, actually? :)
[19:23] <Bingo> at that time there was a flurry of difficulties with activex
[19:23] <Bingo> privacy & security
[19:23] <OerHeks> dot net is now opensource, no?
[19:23] <bekks> Bingo: Those difficulties still exist today, with ActiveX, thats why MS ababonded it, in fact.
[19:24] <Bingo> mah complaint wid them is that their aps are included with a list as software programs I installed
[19:24] <est31> OerHeks, only the core part that's required to run server apps with dotnet
[19:24] <est31> no gui :)
[19:24] <est31> MS doesnt want to hurt its position on the desktop market
[19:25] <bekks> Bingo: They are included in the list of programs because they are programs.
[19:25] <Bingo> K, like why cortana is such a personal info problem, they could just as well made an ap, or boxed it in vm
[19:25] <ducasse> Bingo: an 'app' is just a program. but this is really ot.
[19:25] <bekks> Bingo: Cortana is a program, or as it called nowadays - "an app".
[19:25] <Bingo> it is ot
[19:26] <buggybug> ioria: it worked, problem solved, thanks!
[19:26] <Bingo> aps is on web.
[19:26] <gino> salut les gas
[19:26] <ioria> buggybug, good
[19:26] <ducasse> Bingo: no, those are 'web apps'
[19:27] <Bingo> google docs a webap?
[19:28] <bekks> Bingo: It is a program running in a browser. "App" is just a cool name for "program". And it is OT in here.
[19:28] <Bingo> eats pizza
[19:29] <beowulf_> im sorry but this "support" chat is ridiculous
[19:30] <Bingo> wiki.ubuntu.com/SpeechControl
[19:31] <Bingo> there is gnu for that project already, and google released their stuff to gnu
[19:31] <ioria>  Why do you look at the speck of sawdust in your brother’s eye and pay no attention to the plank in your own eye?
[19:32] <Ali1> a question... adding other distros repo is ok on ubuntu?
[19:32] <Ali1> and running apt update?
[19:32] <OerHeks> beowulf_, not that many users here use displayport
[19:32] <Bingo> uhd?
[19:33] <OerHeks> Ali1, other distro repos in ubuntu is very rare, basicly not oke.
[19:33] <marka> hello world
[19:33] <marka> lol
[19:33] <marka> русские есть?
[19:34] <Bingo> Do you have a display port in your usb3?
[19:35] <Bingo> a pluggable display port thing goes into usb3, and to the 4k tv
[19:35] <mangix> hello, i'm on 16.04 and cannot find this package: https://launchpad.net/ubuntu/+source/pocl . anyone know where i can find it?
[19:35] <setmo> hi, how can i run irssi on the terminal, background it, logout and restore the session when i login again?
[19:37] <invisiblek> setmo: run it in a tmux or screen session
[19:37] <Stinky_Feet> setmo: man screen
[19:37] <OerHeks> setmo, sure, use bg %2 to store, and type fg %2 to bring that process back to foreground.
[19:38] <maxb> that's not going to work across a logout/login. screen or tmux are the tools for this job
[19:40] <squinty> mangix,  click on "Other versions of 'pocl' in untrusted archives." at the bottom of that page for ppa listing.   of course, add at your own risk  ;-)
[19:40] <bekks> Bingo: DisplayPort is something totally different than USB3.
[19:41] <Bingo>  4K UHD (Ultra-High-Definition) Video Graphics Adapter for Multiple Monitors ... and DisplayPort (DP) cable
[19:42] <bekks> Bingo: DisplayPort-Adapter, not USB3-Adapter.
[19:42] <Bingo> it goes inta usb
[19:42] <bekks> Bingo: It goes into the DisplayPort, not USB3.
[19:43] <Bingo> Connects to Windows PCs via USB 3.0 (5Gbps).
[19:43] <bekks> Bingo: DP connects via DP, not USB3. https://en.wikipedia.org/wiki/DisplayPort vs. https://en.wikipedia.org/wiki/USB3.
[19:43] <mangix> squinty: deb command not found
[19:44] <Bingo> oh, well. i bet if the nvidia driver could do it, like it can in windowsm then the 4k would work
[19:44] <Bingo> my info is on internet
[19:44] <bekks> Bingo: I bet you are mixing up connectors.
[19:45] <setmo> invisblek, stinky_feet, oerheks - thanks
[19:46] <Bingo> http://www.amazon.com/Plugable-DisplayPort-Ultra-High-Definition-Graphics-3840x2160/dp/B00NI96S2O
[19:48] <squinty> mangix,  looks like building from source time then :(
[19:49] <Bingo> the tv question is likely answered by the tv maker
[19:49] <OerHeks> Bingo, or check the leftside of the latest macbook
[19:49] <Bingo> :-)
[19:50] <est31> this apt command is new, isn't it?
[19:50] <est31> no more apt-get install, but apt install
[19:50] <MonkeyDust> est31  it replaces apt-get
[19:51] <est31> does it replace other apt tools too?
[19:51] <est31> like apt-cache show?
[19:51] <mangix> i'm supposed to use apt now?
[19:51] <bekks> mangix: Yes.
[19:51] <ducasse> est31: yes
[19:52] <est31> and apt-get dist-upgrade became apt full-upgrade ?
[19:52] <Bingo> synaptic?
[19:52] <Flannel> est31: It's basically a front-end that "smartly" choose apt-get or apt-cache based on the command.
[19:52] <est31> according to the manpage it seems the same
[19:52] <MonkeyDust> apt policy abd apt show, too
[19:53] <Flannel> est31: So, apt-get and apt-cache still exist
[19:53] <Seveas> I've got over a decade of apt-get in my muscle memory. I keep forgetting apt even exists these days :)
[19:53] <est31> and they wont be removed if i read the manpage correctl
[19:53] <est31> y
[19:54] <Flannel> est31: Correct
[19:54] <est31> I just updated to 16.04 and noticed that if you type an existing but not installed command it now suggests apt install instead of apt-get
[19:54] <est31> thats how i found out about this whole apt stuff
[19:54] <MonkeyDust> est31  yes, time to reconsider your life, now apt-get has been replaced with apt
[19:55] <est31> apt list may be interesting, its burdensome to type all this dpkg-whatever
[19:55] <Seveas> est31: you mean dpkg -l ?
[19:59] <preston> the fuck is up with ubuntu 16.04 not coming with unity8? i thought it would have it
[20:00] <bekks> !language | preston
[20:00] <ducasse> preston: not ready yet. 17.04 at the earliest.
[20:01] <OerHeks> I think it is worth waiting
[20:03] <MonkeyDust> too bad he's gone http://www.omgubuntu.co.uk/2016/04/ubuntu-16-04-unity-8-desktop-progress-video
[20:07] <tme5> uh, the wiki front page has gone
[20:07] <OerHeks> tme5, hit F5 , works fine here https://wiki.ubuntu.com/
[20:08] <tme5> sorry i mean https://help.ubuntu.com/community/CommunityHelpWiki
[20:08] <tme5> "This page does not exist yet"
[20:09] <OerHeks> do you think it is gone, or never existed? i think the last
[20:09] <tme5> what
[20:09] <tme5> this is the homepage for the community wiki
[20:09] <tme5> it is linkedt to at the top of the page
[20:09] <lyze> https://webcache.googleusercontent.com/search?q=cache:qQZsViRmysEJ:https://help.ubuntu.com/community/CommunityHelpWiki+&cd=1&hl=en&ct=clnk&gl=at
[20:09] <tme5> click it, in the orange navbar
[20:10] <lyze> It was there at least
[20:10] <tme5> yeah, it's the main page!
[20:10] <tme5> revision history is empty too
[20:11] <OerHeks> hmm CommunityHelpWiki (last edited 2016-03-03 18:20:28 by knome)
[20:11] <tme5> is that from the cache?
[20:12] <OerHeks> tme5, you might want to report this in #ubuntu-website, or mail the https://wiki.ubuntu.com/DocumentationTeam/Contact
[20:12] <OerHeks> i think that last user delted it.
[20:12] <beowulf_> live cd crashes on launch lol.. ahh. ubuntu..
[20:13] <tme5> alright
[20:13] <OerHeks> thanks for noticing anyway
[20:21] <vooze> Have anyone experienced a small lag in the animation when using minimize from dash? When I press on the minimize icon it's just fine.
[20:24] <firman> i just messing my dir "/usr/sbin/usb_modemswitch" do anyone have the script for 15.10?
[20:25] <geirha> firman: just reinstall the package. Run ''dpkg -S /usr/sbin/usb_modemswitch'' to find the package that installed it
[20:26] <firman> geirha: thx a lot
[20:28] <clone3g> I want my ubuntu to not startX by default. So a guide tells me to edit /etc/default/grub. Apparently, I don't have grub.
[20:30] <Bashing-om> clone3g: Cgeck again ,,, as no grub, no boot .
[20:31] <Bashing-om> check**
[20:32] <clone3g> Listen brug, /etc/default/grub is empty. And my system boots
[20:32] <bekks> clone3g: So you might be using grub1.
[20:33] <firman> geirha, its installed but inside the file is so terrible, so many character that unreaded
[20:33] <clone3g> why is the boot loader in charge of starting X?
[20:33] <est31> i doubt thats the case
[20:34] <est31> i mean thats what systemd is about isnt it
[20:34] <est31> or was about back when it was a pid 1 replacement
[20:35] <tme5> i would think clone3g that you have to disable your DM from starting
[20:35] <tme5> via systemd
[20:38] <firman> how to rebuilding "usb_modeswitch"?
[20:40] <geirha> firman: apt-get install --reinstall "pkgname"
[20:40] <clone3g> tme5: thanks I'm getting somewhere
[20:41] <kisuke> got a weird one, got multiple instance of a process i dont recognize, anyway to determine what /proc/<PID>/exe links too?
[20:41] <firman> geirha: "E: unable to locate package usb_modeswitch"
[20:42] <geirha> firman: didn't you find the package name with the dpkg -S earlier?
[20:42] <est31> kisuke, do ls -l on the file
[20:42] <est31> it will show you where the symlink points to
[20:42] <firman> geirha, yes i find it
[20:43] <geirha> firman: ok, I searched it up at packages.ubuntu.com. Package name is usb-modeswitch
[20:43] <tme5> est31, it is not a symlink
[20:44] <tme5> or not a soft one anyway
[20:44] <kisuke> est31,  "cannot read symbolic link, no such file or directory" then it gives me the details of the link....
[20:44] <firman> geirha, its worked, once again thx very much
[20:44] <tme5> ah!
[20:44] <est31> tme5, for me /proc/<pid>/exe are symlinks
[20:44] <tme5> kisuke, do it as root
[20:44] <kisuke> tme5, thats what i did.
[20:44] <kisuke> one sec
[20:45] <kisuke> !pastebin
[20:45] <kisuke> !pastebinit
[20:45] <gio_> ciao
[20:45] <est31> lol ubottu you should put your text onto a pastebin
[20:45] <est31> its so much speak
[20:45] <gio_> edit dreambox
[20:48] <mahmud> helov
[20:48] <tme5> kisuke, solved it?
[20:50] <kisuke> tme5, no, just foundout the hardway that buntu doesnt alias ll
[20:52] <kisuke> http://paste.ubuntu.com/16289413/  is what i get and i still geta line about cannot read symlink.
[20:53] <firman> i have modem stick huawei E1730, when i type on terminal "lsusb" the modem is on modem mode but network manager cant detected, i cant found "connect to mobile broadband" in notification area? i've try all instructions that i see in askubuntu but null... please help me
[20:53] <tme5> kisuke, at the top do you still get "cannot read symlink"?
[20:53] <kisuke> yes
[20:53] <tme5> with sudo for sure?
[20:54] <kisuke> tme5, afirmative. I can try it as root if you like
[20:54] <kisuke> would take a screenshot, but its on SSH on a TTY.
[20:54] <tme5> actually
[20:54] <tme5> some of my /procs have this issue
[20:54] <tme5> it says no such file
[20:55] <kisuke> tme5, same
[20:55] <tme5> idk then :\
[21:04] <axisys> I removed evolution and now my laptop does not show date/time on the top right corner.. how do I bring the date/time panel back?
[21:04] <axisys> bring back...
[21:06] <tme5> axisys, sounds like evolution provides that plugin
[21:08] <Defiance_> is/was your panel on the top?
[21:09] <xangua> axisys: install time date indicator
[21:13] <axisys> Defiance_: yes..
[21:13] <axisys> xangua: how?
[21:14] <axisys> xangua: thanks for the direction.. I were able to find it
[21:16] <axisys> wow indicator-datetime brought back evolution plugins.. odd
[21:17] <axisys> evolution-data-server-common, evolution-data-server and evolution-data-server-online-accounts
[21:17] <axisys> just so I can see the date/time .. on 16.04
[21:18] <xangua> axisys: thank GNOME for that
[21:18] <AlexP11223> I updated 15.10 to 16.04 and now it shows black screen with tty1 instead of desktop. What should I do?
[21:18] <AlexP11223> startx opened something like desktop, but it was just a wallpaper with two not clickable shortcuts and cross instead of cursor
[21:18] <backbox> teest
[21:29] <franks2> Hi, has anyone experienced that the mouse pointer in GNOME apps clicks by itself?
[21:30] <roko> I am trying to install the nvidia drivers but its failing with this error http://pastebin.com/gX9NKAxe
[21:32] <callipygous> Does anybody know how I can force the amdgpu driver to load instead of radeon?
[21:33] <axisys> xangua, Defiance_ , tme5: thanks for your help!
[21:37] <Bashing-om> roko: Is " linux-headers-4.2.0-19-generic " installed on your system ?
[21:38] <Bashing-om> callipygous: What release ? As FGLRX in 16.04 is non-existent .
[21:38] <k1l_> make that "is linux-generic installed"
[21:40] <callipygous> 16.04
[21:40] <callipygous> I'm trying to load amdgpu driver, not fglrx
[21:41] <Bashing-om> callipygous: See the release notes for 16.04 . AMD is devoting all resources to open source driver .
[21:42] <Bashing-om> callipygous: What card ? as preently there are only 2 that take the amdgpu driver .
[21:44] <callipygous> pported
[21:44] <callipygous> Kabini Radeon HD 8330
[21:44] <callipygous> is supposed to be supported by amdgpu driver
[21:45] <OerHeks> you cannot have fglrx driver installed on that 16.04, so what you see is the radeondriver i guess
[21:45] <callipygous> amdgpu != fglrx
[21:46] <OerHeks> what is the output of sudo ubuntu-drivers list
[21:47] <callipygous> amd64-microcode
[21:48] <Bashing-om> callipygous: Yeah .. amdgpu is correct . .. what returns ' dpkg -l xserver-xorg-video-amdgpu ' ?
[21:48] <callipygous> ii  xserver-xorg-v 1.1.0-1      amd64        X.Org X server -- AMDGPU display
[21:48] <callipygous> it
[21:49] <callipygous> it's installed as far as I can tell.  It's not loading, however
[21:50] <FredTheNoob> hi guys, a device manager for ubuntu 16.04?
[21:50] <bekks> FredTheNoob: the terminal of your choice.
[21:51] <Bashing-om> callipygous: Let's see what X thinks ' cat /var/log/Xorg.0.log | nc termbin.com 9999 ' .
[21:51] <FredTheNoob> I mean, something with gui? lol
[21:52] <FredTheNoob> buy indeed bekks, you're right
[21:52] <bekks> FredTheNoob: there is basically no need for it :) what is he actual issue?
[21:52] <callipygous> http://termbin.com/y48o
[21:52] <OerHeks> sudo apt-get install hardinfo http://askubuntu.com/questions/31618/how-can-i-find-my-hardware-details and some tricks
[21:53] <FredTheNoob> ok thaks callipygous
[21:58] <Bashing-om> callipygous: Erk. the system happily loaded 'radeon' instead of 'amdgpu' . I do not know what is not taking place . Homework time.
[22:02] <FredTheNoob> hi bekks, I don't remember command line to do that... do you have a reference?
[22:02] <k1l_> FredTheNoob: what do you want to do at all?
[22:04] <FredTheNoob> right now? I had finished my work, I mean I'm watching tv on my pc.. lol
[22:05] <FredTheNoob> bekks question is just to learn
[22:05] <k1l_> FredTheNoob: why do you ask for a device manager? because there is no such thing on linux. but if you have an issue we could find another way to solve that
[22:06] <FredTheNoob> kil_ do you a have a reference to manage devices by cli?
[22:07] <k1l_> FredTheNoob: "manage"?
[22:07] <FredTheNoob> I mean to work with
[22:07] <k1l_> that depends on what exact device you want to manage
[22:08] <k1l_> video cards have other programs than printers etc.
[22:08] <FredTheNoob> ohh k
[22:09] <FredTheNoob> no ploblem
[22:11] <squinty> FredTheNoob,  might also want to check inxi (in the repo's)  Basic info on installing and using at http://www.unixmen.com/inxi-find-system-hardware-information-linux/     Sample displays and info at https://code.google.com/archive/p/inxi/
[22:11] <Guest22033> ciao a tutti, c'è qualche utente che parla italiano e che può aiutarmi?
[22:12] <squinty> !it
[22:12] <FredTheNoob> goodone awesome squinty
[22:12] <Guest74729> help
[22:13] <squinty> !details
[22:13] <Guest74729> I have vista and ubuntu on laptop I messed up ubuntu trying to upgrade
[22:14] <Guest74729> can anyone do remote and help me thru this
[22:15] <Guest74729> I am very new do not understand commands ect
[22:17] <Guest74729> Is there any simpler sites to ask
[22:18] <squinty> Guest74729,  to get a clearer picture so that others may potentially help you, you need to provide more details.  what were you upgrading, what commands did you use etc.  if someone can help they will respond
[22:19] <squinty> Guest74729,  you could also check out ubuntu web sites like askubuntu.com
[22:19] <pkhaxorz> I have a weird issue
[22:20] <pkhaxorz> when I open up my downloads folder
[22:20] <pkhaxorz> it starts a memory leak
[22:20] <pkhaxorz> and all my ram gets omnomed by nautilus
[22:20] <Guest74729> I was upgrading from 14.0 to 16.4 it crashed.  No commands were used.  cannot delete it from windows vista.
[22:21] <callipygous> Does anybody know how to force the amdgpu driver to load?  I have googled all night, and found nothing
[22:21] <callipygous> It keeps loading radeon driver, which I don't want
[22:21] <squinty> Guest74729,  delete what exactly?  if you originally installed using wubi, then it would be better to reinstall with a dual boot system.  wubi installs are not recommended
[22:21] <callipygous> nor do I want fglrx
[22:21] <callipygous> I want to try the amdgpu driver, but it won't load...
[22:23] <Bingo> amdgpu open source driver?
[22:23] <callipygous> I think so
[22:24] <callipygous> I've just removed radeon driver, so I'm going to reboot and see if that forces amdgpu
[22:25] <Bingo> there is plainly a link for that gpu
[22:26] <Bingo> it is for 14.04 though
[22:28] <callipygous> back
[22:29] <Bingo> https://help.ubuntu.com/community/RadeonDriver
[22:29] <callipygous> so that didn't work, it still loads radeon
[22:29] <Bingo> the open source driver is for 14.04
[22:29] <Bingo> try to check your card and check what you have, with the link above
[22:31] <Bingo> xserver-xorg-video-ati package.
[22:32] <Bashing-om> callipygous: Is " libdrm-amdgpu1 " installed .. and did you remove the old xorg.conf file ?
[22:32] <pkhaxorz> hello
[22:32] <pkhaxorz> once again
[22:32] <pkhaxorz> I try opening my downloads folder
[22:32] <pkhaxorz> and I get a massive freaking memory leak
[22:32] <pkhaxorz> that omnoms all of my ram
[22:33] <pkhaxorz> _really quickly_
[22:33] <Bingo> in 16.04?
[22:33] <pkhaxorz> ya
[22:33] <pkhaxorz> If I don't kill it, it locks up the machine
[22:33] <pkhaxorz> because no ram
[22:33] <Bingo> it hmms, a long time
[22:33] <callipygous> Bashing-om: yeah,it's installed
[22:34] <callipygous> Bashing-om: don't know what you mean by 'removing old xorg file', as xorg rarely uses one these days
[22:34] <Bingo> xorg package has the ati
[22:35] <Bingo> xserver-xorg-video-ati package.
[22:35] <Bashing-om> callipygous: Agreed, that it has been depreciated. But if there will be used . ls -al /etc/X11/Xorg.conf .
[22:35] <callipygous> yeah, doesn't exist
[22:36] <Bingo> 16.04 enabled by default
[22:36] <squinty> aptitude show xserver-xorg-video-amdgpu   is this driver not applicable right now?  don't have radeon her so am not sure.........
[22:36] <callipygous> well, that's the driver I'm trying to get to load
[22:37] <Bingo> check if it is already loadered
[22:37] <callipygous> it's not
[22:38] <Bingo> https://help.ubuntu.com/community/BinaryDriverHowto/AMD
[22:38] <callipygous> that's not going to work, Bingo
[22:38] <callipygous> not on 16.04
[22:39] <callipygous> I'm going to reboot, brb
[22:39] <squinty> callipygous,  did that aptitude command show it as installed (it is actually install automatically even on this system here which doesn't have radeon in it)
[22:39] <Bingo> well u dont want fgrx. be sure it is not on your ubuntu
[22:40] <Bingo> launchpad may have the listed bug for that driver
[22:41] <squinty> he left
[22:43] <Bingo> there is another page . precise install
[22:44] <squinty> Bingo,  he left
[22:45] <OerHeks> there is one solution with a ppa with newer builds, but i wonder if he is chasing ghosts as he has the driver installed already,
[22:47] <squinty> Suggests: firmware-amd-graphics   but   aptitude show firmware-amd-graphics No current or candidate version found for firmware-amd-graphics Package: firmware-amd-graphics State: not a real package
[22:48] <squinty> kinda weird
[22:48] <Apteryx> Hi, my Evince document viewer cannot display some fonts. It seems it has to do with my LaTeX installation replacing some fonts like Helvetica by GyrosTex for example, which for some reason are not displayed in Evince. Any suggestion?
[22:49] <Bingo> gtg, ya
[22:52] <Apteryx> s/GyrosText/TeXGyre/
[22:54] <phucktank> Hey is there anyone out there that could try and help me with a problem?
[22:55] <phucktank> anyone in here?
[22:56] <squinty> !ask
[22:57] <phucktank> My usb mouse and keyboard do not work when I boot up until I unplug and plug them back in a few times. They work in windows and in my bios. Any idea what could be causeing the issue?
[22:57] <Guest20912> Can I get support here?
[22:58] <rhinolover> Hi
[22:59] <squinty> !topic | Guest20912
[23:04] <phucktank> My usb mouse and keyboard do not work when I boot up until I unplug and plug them back in a few times. They work in windows and in my bios. Any idea what could be causeing the issue?
[23:05] <FreeOats> Wow that's a lot of people
[23:06] <FreeOats> All AFK I bet
[23:07] <squinty> phucktank,  http://askubuntu.com/search?q=My+usb+mouse+and+keyboard+do+not+work+when+I+boot+up    might give you some ideas
[23:07] <sim590> I'm trying to boot from USB key. I have dd if=ubuntu.iso of=/dev/sdb. When I press f12 on my Acer v5 pc, I see the USB stick, but when I select, it just defautls back to windows, so I guess the image is not well written to disk, but why ?
[23:07] <sruli> hi, does anyone have experience with letsencrypt? i am having trouble renewing my certs on my web server (expired today) "Type:   unauthorized ...   Detail: Correct zName not found for TLS SNI challenge. Found..."
[23:08] <TJ-> sruli: is that using the letsencrypt client?
[23:08] <sruli> TJ-: yes
[23:08] <phucktank> Sim590 what did you use to put the ISO on the usb key?
[23:09] <TJ-> sruli: and are you using the file-in-my-web-server method of authentication?
[23:09] <sruli> TJ-: ./letsencrypt-auto certonly -a standalone -d domain.1 -d domain.2 ...
[23:09] <sim590> phucktank: http://releases.ubuntu.com/16.04/ubuntu-16.04-desktop-amd64.iso.torrent
[23:10] <sruli> TJ-: i am not sure where it tries to put the file for authentication, i redirected prot 80 from my webserver to mail server and turned of http>https redirect
[23:10] <TJ-> sruli: that error, talking about SNI (server name indication) referes to HTTPS servers with multiple domains hosted on a single IP address; it looks like the wrong path is being used
[23:10] <rhinolover> Has anybody used the ubuntu dist on aws?
[23:10] <sim590> phucktank: should I use minisio (http://cdimage.ubuntu.com/netboot/16.04/) instead ?
[23:10] <phucktank> sim590 are you trying to install from USB or you installed  it on a usb drive?
[23:11] <sruli> TJ-: yes its multiple domains, wrong path for what
[23:11] <sim590> phucktank: I'm trying to boot from the USB key.
[23:11] <sim590> phucktank: it just won't boot, when I select the USB key in the menu.
[23:11] <squinty> sim590,  might want to try adding "&& sync" after the dd commandline
[23:11] <sim590> FALSE ALERT.
[23:12]  * sim590 is ashamed.
[23:12] <sim590> I took the wrong USB key
[23:12] <phucktank> sim590 lmao
[23:12] <sim590> I had two usb keys nearby...
[23:13] <anonymous_> salve
[23:13] <sim590> wow, but now I get "failure reading sector" thing error, and then when I press enter, I see a kernel call trace.
[23:13] <TJ-> sruli: I forget precisely how now, but I think its the 'standlaone' mode of LE that puts an auth dir+file in the root of the domain's Directory
[23:13] <sim590> kernel pani error.
[23:13] <anonymous_> ?????'
[23:13] <anonymous_> i have this error:
[23:14] <anonymous_>                                             ------------YOU HAVE BEEN HACKED------------------------
[23:14] <anonymous_> * #ubuntu Lista ban: Fri Apr 15 20:01:17 *!42b075c0@gateway/* weber.freenode.net
[23:14] <anonymous_> * #ubuntu Lista ban: Fri Apr 15 20:01:17 *!*yan@*.cg.shawcable.net weber.freenode.net
[23:14] <anonymous_> * #ubuntu Lista ban: Fri Apr 15 20:01:17 $a:HFSPLUS weber.freenode.net
[23:14] <anonymous_> * #ubuntu Lista ban: Fri Apr 15 20:01:17 *!*@1968.rt-barnaul-02.dianet.ru weber.freenode.net
[23:14] <anonymous_> * #ubuntu Lista ban: Fri Apr 15 20:01:17 *!*@46.165.251.153 weber.freenode.net
[23:14] <TJ-> sruli: the idea being the LE client tells the LE server a secret, and the LE server makes a connection to the domain and requests a file containing a hash to verify the operator of the LE client has control of the domain
[23:15] <sruli> TJ-: how do i find which is the path for the www dir, using httpd? (this server is for mail and don't host sites on it)
[23:15] <FreeOats> Never thought learning about all this crazy shit was as simple as observing an IRC channel
[23:15] <TJ-> sruli: so, if you've messed with the usual HTTP(S) server config maybe that's what is breaking it?
[23:16] <sruli> TJ-: while https is on have same error that why i turnbed it off
[23:16] <TJ-> sruli: the base dir by default is usually /var/www/ or /var/www/html/
[23:16] <squinty> !language | FreeOats
[23:16] <squinty> family channel :)
[23:17] <FreeOats> Who'd bring their family to an Ubuntu IRC channel? I doubt the kids would play attention for long..
[23:17] <squinty> FreeOats, and now you are off topic
[23:18] <vanham> #doveot
[23:18] <beowulf_> i rebooted and a resolution option has disappeared?!?
[23:19] <Abe_> how can I remove the "Menubar button from KDE?" http://www0.xup.in/exec/ximg.php?fid=51092251 "the button with the M" upper left corner of windows ?
[23:19] <sruli> TJ-: thanks, my httpd config seemed to suggest that dir is at /usr/share/httpd/noindex/... so i tried "./letsencrypt-auto certonly --webroot --webroot-path /usr/share/httpd/noindex/" i now changed that path to /var/www/html/ and it worked
[23:19] <Abe_> no nobody answers me in kubuntu
[23:19] <Abe_> like always
[23:19] <squinty> beowulf_, if new install check  Software and Updates -> Additional drivers to see if anything is offered
[23:20] <nexusstar> Anyone running HexChat on 16.04, I am facing dificulties installing it, on fresh install it just lack menu?
[23:20] <Abe_> using qtcurve
[23:20] <beowulf_> squinty, only difference is i enabled SLI via nvidia-xconfig
[23:21] <squinty> nexusstar, no problems using it here.  are you installing from repo's and are your upgrades up to date?
[23:21] <TJ-> sruli: ignore me! "standalone" isn't the mode I was thinking of, I used the "webroot" mode last time
[23:21] <sruli> TJ-: i used that in my last command... why doesnt thunderbird auto get new cert?
[23:22] <TJ-> sruli: I used "XDG_DATA_HOME=/usr/local/share /usr/local/letsencrypt/letsencrypt-auto renew --webroot"
[23:23] <sruli> TJ-: i will make a note of it and try it next time
[23:23] <nexusstar> squinty I have  it installed and configured before upgrade but after that it doest not show up
[23:24] <TJ-> sruli: glad you got it... I'm buried in fixing bugs with yubikey PAM authentication code here
[23:24] <nexusstar> squinty: so I just remove and even purge it several times and fresh install
[23:25] <sruli> TJ-: thanks and good luck
[23:26] <squinty> nexusstar, did you also delete  /home/USER/.config/hexchat  before reinstalling.  purging doesn't remove that directory
[23:26] <nexusstar> squinty: no I know, but hope to use my old config again
[23:27] <nexusstar> squinty, so whenever I installed it again it just pop ups connect with my nick and connects but without any menu
[23:28] <squinty> nexusstar,  rename it and see if new config solves your problem.  you can then check the difference between the two directory (the new and the renamed old one)
[23:28] <nexusstar> squinty, will try just that, thanks a lot
[23:29] <squinty> nexusstar,  yw
[23:30] <sruli> how can i test my new cert on webserver? thunderbird doesnt see to get the new one i tried "openssl s_client -connect mail.mydomain.com:443" but it does not show expiry date
[23:31] <ibrahim> i am facing an issue with some apps i.e. gnome calendar that the corners of its menu bar ar white and edgy :/ and idont want to change the theme
[23:32] <user__> hh
[23:33] <ibrahim> I am facing an issue with some apps i.e. gnome calendar that the corners of its menu bar ar white and edgy :/ and idont want to change the theme
[23:35] <TheMarius> ubuntu gnomes with the theming
[23:35] <TheMarius> my mate has theming error in synaptic
[23:35] <ibrahim> i run unity
[23:35] <TheMarius> mate is better, me thinks.. but thats me
[23:36] <ibrahim> isn't this a popular issue?
[23:36] <TheMarius> sad to see linux still plagued by bugs and half done things, but i guess you have to expect it
[23:37] <nexusstar> squinty: just mv(ed) ~/.config/hexchat and fresh install and all is the same will continue for now to use irssi and dig the problem with hexchat
[23:37] <ibrahim> it's not that much dude ... atleast better than M$ win
[23:38] <TheMarius> thats up for debate but corporations do pump out some amazing software
[23:38] <TheMarius> look at android and the video editing for gopro i just found, that runs on mobile phones
[23:39] <ibrahim> android is full of Google's crap
[23:39] <TheMarius> however... open source is what i use for software since it does what i need
[23:39] <squinty> nexusstar,  that is weird.  you all upgraded (sudo apt update && sudo apt full-upgrade)
[23:40] <TheMarius> no frills, straight forward junk free open source software
[23:40] <TheMarius> win or linux ... pretty much same software.. gimp, inkscape, hexchat, filezilla etc
[23:41] <TheMarius> but ubuntu needs some polish to get out the bugs.. idk whats stopping them
[23:41] <TheMarius> could be its hard to do... idk
[23:42] <nexusstar> squinty: yes removed all traces of hexchat and reinstall
[23:44] <squinty> nexusstar,  hmmm...nothing else springs to mind then other than it maybe theme related (if that is applicable for your situation).  maybe others here may have thoughts on the subject
[23:48] <nexusstar> squinty: I just too run out of ideas so will go to sleep for now and toggle it some other time. Thanks again
[23:49] <squinty> nexusstar,  yw   and good luck  :-)