[00:00] <DetroitBadBoy> Now with the apps gone, are you able to look for the kde files that bprompt told you to look for?
[00:03] <fuze> DetroitBadBoy: first id just like to say that it seems NetworkManager is having a lot of problems. is there any way to reinstall it?
[00:05] <DetroitBadBoy> fuze: read this page..........      https://help.ubuntu.com/community/WICD
[00:06] <fuze> https://www.irccloud.com/pastebin/nFQdY9Et/
[00:06] <fuze> DetroitBadBoy:
[00:07] <DetroitBadBoy> hmmmmm
[00:07] <DetroitBadBoy> fuze: Do you have your install disk?
[00:08] <fuze> DetroitBadBoy: from an old version
[00:08] <DetroitBadBoy> fuze: have you checked for updates?
[00:08] <fuze> DetroitBadBoy: yes i did a distribution upgrade today hoping it would fix the problems. no luck
[00:08] <DetroitBadBoy> ok
[00:08] <DetroitBadBoy> stand by
[00:09] <fuze> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[00:09] <DetroitBadBoy> You are running kubuntu with plasma 5, right?
[00:11] <DetroitBadBoy> fuze: you are running Kubuntu with Plasma 5, right?
[00:11] <fuze> DetroitBadBoy: yes
[00:11] <DetroitBadBoy> ok... go to this link http://kubuntu.org/getkubuntu/
[00:11] <DetroitBadBoy> Download it again. Back up ALL your files. Then do a re-install. Sounds like that disro upgrade jammed things up
[00:12] <fuze> DetroitBadBoy: no ive had this problem since i started using kubuntu
[00:12] <DetroitBadBoy> really?
[00:12] <DetroitBadBoy> hmmmm
[00:13] <fuze> yes particularly since i started theming plasma
[00:13] <fuze> should i install kde-runtime-data?
[00:13] <DetroitBadBoy> You can do that, yes
[00:13] <fuze> kde-runtime-data is already the newest version (4:15.12.3-0ubuntu1).
[00:14] <DetroitBadBoy> Well from what you have shown and what you've typed it is looking like a mismatch somewhere
[00:14] <fuze> is there a repair tool
[00:15] <mtn> fuze: reinstall of kubuntu is the easiest/quickest method
[00:15] <fuze> mtn: i have customized everything so much i dont want to start over
[00:15] <mtn> fuze: ok, good luck
[00:16] <fuze> there is no repair program?
[00:16] <mtn> fuze: to repair what?
[00:16] <fuze> broken files
[00:16] <DetroitBadBoy> fuze: I'm not seeing anything about that outside of the install CD itself
[00:16] <mtn> fuze: reinstall them, that is how you "repair" them
[00:17] <DetroitBadBoy> Yes. That is the normal way to repair them. Just re-install them but take care. A lot of folks have looked at sites that make them think they are using genuine linux/ ubuntu/kununtu/ etc software when it is something that could possibly corrupt your OS
[00:17] <mtn> fuze: reinstall of kubuntu is the easiest/quickest method
[00:18] <DetroitBadBoy> Yes
[00:18] <mtn> fuze: and safest, too
[00:18] <DetroitBadBoy> Back up all of your files. Re-install your apps and widgets
[00:18] <fuze> ok but how can i reinstall networkmanager
[00:18] <bprompt> I have an ssd, and an installation takes me 5mins
[00:18] <mtn> fuze: use the package manager
[00:18] <fuze> i have had to get help to install some programs so i really dont want to start over
[00:19] <DetroitBadBoy> Yes, the package manager can help with the re-install of network manager
[00:19] <bprompt> this thread has been going over an hour, I'd had installed kubuntu 12 times now =)
[00:19] <mtn> indeed
[00:19] <DetroitBadBoy> argh
[00:20] <fuze> ok reinstalling
[00:20] <DetroitBadBoy> fuze: Sorry about your troubles
[00:21] <fuze> also i meant reinstalling network manager not the OS
[00:21] <DetroitBadBoy> ok
[00:21] <bprompt> fuze:     back up all your $HOME folder, do a full reinstall, when done, backup the newly default $HOME folder, then you'd have the backup of your old configuration, which isn't working so well, and you'll have the new defaults, which are working, from there, use the old configuration, to see if it's a binary that's gone bonkers, or is really your configuration, if worse comes to worse, you can always put the default  $HOME back
[00:21] <fuze> if i delete qml files will they automatically recreate?
[00:22] <mtn> fuze: if you think it is a config problem, make a new user, login as the new user. see how well it works for the new user
[00:22] <bprompt> fuze:    yes and no, depends on the app, some do, some don't
[00:22] <bprompt> yeap... that's a good tip, make a new user account, will be a new profile, to test if things work for it
[04:48]  * Laif hi :)
[04:50] <lethu> hello Laif
[06:21] <hyper_ch> hi there, I have several issues with 16.04 -> I see no TTYs... this is annoying because if I select to poweroff, it just stops somehwere and doesn't continue and I can't figure out what's wrong. Also "boot up" until luks key entry takes like 20 seconds (ssd)
[06:31] <lethu> hyper_ch: pastebin your /var/log/kern.log
[07:02] <hyper_ch> lethu: https://www.sjau.ch/kern.log
[07:03] <hyper_ch> starting at May 17 08:15:26
[11:44] <oper_> hallou
[11:44] <oper_> !list
[11:45] <oper_> !chanellist
[11:45] <oper_> #musik
[12:57] <BluesKaj> Hiyas all
[13:30] <SternNL> Just installed Kubuntu 16.04 on my laptop (fresh install). Now the mouse cursor is glitching. When moving my mouse inside a window, i'll get up to 30 mouse cursors. Is this a known bug? And if so, does someone have a solution?
[13:31] <soee> never seen that :)
[13:32] <hateball> SternNL: what GPU?
[13:32] <hateball> SternNL: and is this regardless of application?
[13:38] <SternNL> hateball: Geforce GT 555M/635M. Regardless of application. Even on a plain desktop near a panel.
[13:39] <hateball> SternNL: are you using nVidia driver or nouveau ?
[13:41] <SternNL> I'm not sure how to find out. Previously I always used the Driver application for this, but this one doesn't work anymore.
[13:41] <hateball> SternNL: You can use "ubuntu-drivers" from the commandline
[13:43] <hateball> SternNL: "sudo ubuntu-drivers autoinstall" will(should) install any missing drivers
[13:44] <wuschLOR> Hi there how can is disable cups from auto adding printers in my network ?
[13:49] <SternNL> hateball: Sorry, I have trouble reaching some of the ubuntu repositories. Will try it later.
[14:28] <viewer|70304> Hi
[14:29] <soee> hiho
[14:29] <viewer|70304> Do you have kubuntu?
[14:30] <soee> this is rather rhetorical question no ? :)
[14:31] <viewer|70304> Of Course ;)
[14:35] <viewer|70304> I want to Switch from Windows to kubuntu and had ubuntu as a second OS. In ubuntu 16.04 I had some graphical issues when I enabled the Drivers for my graphics Card (nvidia Geforce GTX 850M). After that I couldn't log in. Since I wanted to Switch completely from Windows to Linux I just wanted to know, if there are similar Problems. Do you know more
[14:35] <viewer|70304> about that?
[14:39] <soee> well propriety driver works nice for me on my GF 650M
[14:39] <soee> *my
[14:40] <viewer|70304> And you don't have Problems with logging in?
[14:40] <viewer|70304> Every time I enabled the Drivers I had to reinstall my whole compter
[14:40] <viewer|70304> Computer*
[14:42] <soee> viewer|70304: on Kubuntu ?
[14:43] <acheron88> nvidia 364.19 driver working nicely here on kubuntu xenial 16.04
[14:44] <soee> +1
[14:44] <acheron88> from here admittedly https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa
[14:45] <acheron88> though the main archive ones were also Ok for this card
[14:46] <viewer|70304> Thank you! Hopefully all will work this time.
[15:22] <Quantos> I have a DLink dwa 130 and KUbuntu 16.04
[15:22] <Quantos> I can't seem to get the wifi working, I'm not sure what needs to be done
[15:24] <Quantos> The dongle works, I've tested it on other rigs
[15:32] <genii> Quantos: Is the package linux-firmware-nonfree installed?
[15:32] <Quantos> I think so, how do I verify it?
[15:32] <genii> ( multiverse repository needs to be enabled to install it)
[15:34] <Quantos> I'm not sure how to check if that repository is enabled
[15:35] <genii> !repos
[15:36] <Quantos> Okay, give me a few minutes to go over that
[15:38] <yossarianuk> looking at this bug -> https://bugs.launchpad.net/ubuntu/+source/networkmanager-qt/+bug/1569674  It says 'fix released' however I still cannot change any wired network settings with network-manager GUI
[15:38] <Quantos> That works for Muon, this is a different package I think
[15:41] <BluesKaj> yossarianuk:  i ran a full-upgrade and the patch installed, that was a few days ago
[15:44] <Quantos> Yeah, genii, those links don't apply in any way that I can find
[15:45] <genii> Quantos: Simplest way is just to manually edit the /etc/apt/sources.list file ( with admin priveleges) and add the multiverse repository that way.
[15:45] <Quantos> Then tell me how to do that
[15:48] <Quantos> Oh, it's already enabled in there
[15:49] <Quantos> So how do I install the linux-firmware-nonfree
[15:51] <genii> Quantos: sudo apt update && sudo apt install linux-firmware-nonfree
[15:51]  * genii runs back to work
[15:52] <Quantos> No such package
[15:52] <Quantos> Wow, you sure know your shit Genii - NOT
[15:53] <Quantos> Cmon guys, I'm on 16.04, this worked so much easier on 15.04
[15:57] <genii> !info linux-firmware-nonfree
[15:57] <genii> !info linux-firmware-nonfree trusty
[15:57] <soee> what is the problem ?
[15:57] <genii> Looks like it was removed
[15:57] <Quantos> ACH
[15:57] <Quantos> Figures, it's the one I need
[15:58] <Quantos> I owe you an apology then genii
[15:58] <Quantos> Sorry mate
[15:59] <yossarianuk> BluesKaj: I updated this morning, I still get an error when changing net-manager profiles...
[16:01] <Quantos> Okay, so that's no longer an option, what else can I try?
[16:05] <genii> Quantos: Please pastebin results of: lsusb     and: sudo lshw -C network
[16:06] <Quantos> Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
[16:06] <Quantos> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[16:06] <Quantos> Bus 001 Device 004: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP)
[16:06] <Quantos> Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
[16:06] <Quantos> Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
[16:06] <Quantos> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[16:06] <genii> !pastebin | Quantos
[16:07] <Quantos> Sorry, my bad
[16:08] <Quantos> lsusb results https://paste.kde.org/po6t0lqd5
[16:09] <genii> Interesting, it's not showing on the USB bus
[16:10] <Quantos> And the other command doesn't work
[16:10] <genii> So that means it does not see a network device
[16:10] <Quantos> There's the ethernet, or does it only see wifi?
[16:10] <genii> Quantos: This IS a USB adapter, yes?
[16:10] <Quantos> Yes, it is
[16:11] <Quantos> And it does work, I tested it on another machine
[16:12] <genii> Quantos: So in that case, unplug it for about 5 seconds, plug it back in to the USB port, wait another 5 seconds, then issue: dmesg| tail -n20   ...and put the results of that command into a pastebin
[16:12] <genii> work, AFK 5-7 minutes
[16:12] <Quantos> Okay
[16:16] <Quantos> Genii, here it is https://paste.kde.org/p3z4t798w
[16:19] <genii> Quantos: If you do: ifconfig -a    ... do you see a device named like wlx6c7220e24a3e  ?
[16:20] <Quantos> Yes I do
[16:20] <Quantos> Actually it's named exactly thta
[16:20] <Quantos> that even
[16:24] <genii> Quantos: See now if you can make a new wireless connection from network manager, using that as the device
[16:25] <Quantos> Okay
[16:27] <Quantos> Genii, where do I find the network manager?
[16:28] <Quantos> Think I found it
[16:28] <Quantos> Do I need to install that?
[16:28] <genii> No
[16:29] <genii> Normally to get there, go to the network icon on your main bar, the one that says "Networks" when you hover on it, right click and choose Configure Network Connections
[16:30] <Quantos> I have network settings but I can't get anything
[16:31] <Quantos> Okay, it won't auto detect the SSID
[16:33] <genii> Quantos: Is the wifi access point ( like router or such) set not to broadcast it's name?
[16:33] <Quantos> No, I have the SSID set to broadcast
[16:33] <Quantos> I typed it in manually
[16:35] <Quantos> Okay, supposedly I have a new connection, but it hasn't asked me for my password yet
[16:35] <genii> My lunch is ready, I have to go eat. Will be back in 15-20 minutes
[16:35] <Quantos> Okay
[16:38] <Quantos> And it won't do a thing
[16:52] <genii> Quantos: After looking at https://wireless.wiki.kernel.org/en/users/drivers/rt2800usb , Looks like the rt2800usb driver has some problems with more recent ralink chips ( ones made by mediatek ). So the options here would be to either use ndiswrapper, and dig out the Windows driver CD for that, or find the exact model of the adapter and see if there is a fixed driver for it on mediatek's site
[16:52] <tahaan> Does anybody else experience issues with Kubuntu 16.04 stabilty?  Window decorators keep on disappearing
[16:53] <Quantos> Okay, it's a DLink DWA 130
[16:53] <Quantos> Any idea if it's covered by another driver?
[16:54] <genii> Quantos: Could you look at whatever stickers or other writings on it, and see if there's more info like FCCID, or more exact model name? ( because there are several generations of DWA 130 with different chips)
[16:54] <Quantos> Of course there are, nothing can be easy
[16:55] <Quantos> Part number is cwa130na.....f1?
[16:56] <Quantos> The f1 must be for something else
[17:03] <Quantos> Okay, just installed ndiswrapper
[17:04] <genii> Quantos: Using the output of your previous pastebin, where it says "RT chipset 5392, rev 0223 detected" the only result on the mediatek site is for a Windows driver, so the ndiswrapper seems the next method to try
[17:05] <genii> Quantos: http://www.mediatek.com/en/downloads1/downloads/pcimpcicbrt2860rt2760rt2890/ is the link to that
[17:05] <Quantos> I've installed ndiswrapper, just trying to find out how to use it
[17:05] <genii> !ndiswrapper
[17:06] <genii> Quantos: Basically, you're going to need to extract from the Windows driver the driver files, put them in their own directory underneath of /lib/firmware and then point ndiswrapper at those
[17:06] <genii> work, afk
[17:15] <adymitruk> anyone else's sound die after the last kernel update?
[17:23] <BluesKaj> adymitruk:  not here, but check lsamixer in the terminal and make sure automute is disabled and required volume ctrls aren't muted
[17:23] <BluesKaj> alsamixer
[17:57] <user|53677> My driver management is collecting system data for hours now. What can I do to fasten it up?
[17:58] <adymitruk> wow.. alsomixer looks awesome on the terminal!
[17:59] <BluesKaj> user|53677:  nothing, it's a bug that's on the back burner
[18:00] <adymitruk> BluesKaj: how do I turn off automute? can't see where that is
[18:00] <BluesKaj> user|53677:  find out which linux driver your gpu is recommended on the manufactureres web site then install it from the repos
[18:01] <BluesKaj> adymitruk:  it's on the far right
[18:01] <BluesKaj> use the down arrow ket to disable it
[18:01] <BluesKaj> key
[18:02] <adymitruk> I just see X-Bass
[18:02] <user|53677> Is there any other way to choose my graphic card driver beside the driver management?
[18:02] <adymitruk> headphones work.. maybe it's the speakers themselves
[18:03] <adymitruk> damn
[18:03] <BluesKaj> user|53677:  which gpu?
[18:04] <BluesKaj> adymitruk:  paste a screen shot of your alsamixer in http://imgur.com/
[18:04] <user|53677> nvidia geforce gtx 850m
[18:07] <BluesKaj> user|53677:  sudo apt install nvidia-361
[18:10] <user|53677> And how do I enable it or does it enable itselve automatically?
[18:16] <BluesKaj> user|53677:  reboot and it should be working, you can check by using this command ; sudo lshw -c video
[18:18] <user|53677> ok thank you
[18:19] <user|53677> I'll restart no
[18:19] <user|53677> now
[18:22] <user|53677> It worked! Thank you so much!
[19:04] <angel1604lts> excuse me I have a little problem with ubuntu 16.04does not see me the bluetooth card on my laptop  hp 4540s
[19:12] <genii> angel1604lts: Looks like the chipset in that model is not linux-friendly. http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/HP-ProBook-4540s-drivers-for-Linux/td-p/2699495
[20:25] <benedikt_> Hello. Can somebody please help me ? I need to export my passwords from firefox, which I did already and I want to import them into rekonq.
[20:27] <DetroitBadBoy> bendikt_: Export FF’s bookmarks with its bookmark manager as HTML file.
[20:27] <DetroitBadBoy> Close Rekonq/Konqueror, run keditbookmarks and import the HTML file.
[20:27] <DetroitBadBoy> Let keditbookmarks fetch all favicons (select all and then right-click).
[20:27] <DetroitBadBoy> Define your FF bookmark bar folder als KDE bookmark bar folder.
[20:27] <DetroitBadBoy> Close keditbookmarks and launch Rekonq again.
[20:28] <benedikt_> also I am new to plasma 5. I would like to put my display configuration on my task manager as a shortcut, since I often switch from single to dual monitor
[20:28] <benedikt_> DetroitBadBoy: thanks, but it's not the bookmarks, but the passwords. ;)
[20:33] <DetroitBadBoy> benedikt__: have you checked KDE wallet for the passwords? That is where rekonq stores them
[20:35] <benedikt__> ok, I am checking KDEWallet right now, I am trying to see how I can import the xml file with the passwords
[20:45] <DetroitBadBoy> benedikt__: when you open KDE wallet, do you see where it shows Launch Wallet Manager?
[20:46] <benedikt__> nope :(
[20:47] <DetroitBadBoy> benedikt__: does your KDE wallet have the word file at the top left?
[20:47] <benedikt__> yes I am in the wallet manager
[20:48] <DetroitBadBoy> ok, top left click on file, click on import XML, search for firefox and have it import it from there
[20:49] <benedikt__> I get Error: XML file does not contain a wallet
[20:55] <benedikt__> I guess I will enter each site manually and re enter each password manually
[21:08] <valorie> !usb
[21:26] <koo7> hi
[21:26] <koo7> window manager animations are so slow it is interfering with using my computer, is this intended?
[21:27] <koo7> i dont mean laggy, fps is alright
[21:27] <koo7> i just cant find any settings for this
[21:28] <koo7> alt-tabbing resembles a slideshow of holiday photos made by old people
[21:38] <tux|dude> Try restarting the window manager
[21:38] <tux|dude> Alt+F2
[21:39] <tux|dude> kquitapp5 plasmashell
[21:39] <tux|dude> Then wait a few seconds
[21:39] <tux|dude> Alt+F2 again
[21:39] <tux|dude> plasmashell
[21:42] <tux|dude> I find that sometimes helps with if you run into interface lag or something
[21:43] <tux|dude> Hopefully they fix it soon
[21:53] <koo7> i found animation speed settings...finally
[21:59] <em> what is the easy way to disable the touch screen on a laptop with kubuntu 16.04 ?
[22:40] <goddard> I'm unable to send email messages through kmail while using gmail
[22:43] <Zren> koo7, if alt-tab is still slow, try the big icons alt tab skin
[22:43] <Zren> i found that the thumbnail generation was what slowed down my pc
[22:49] <koo7> thanks..yea that has an effect too
[23:09] <Guest1181> Anyone know why kubuntu 1604 doesn't show any of my other HDD's?
[23:09] <Guest1181> The installer I mean
[23:11] <Guest1181> nevermind my last
[23:12] <Guest1181> It seems to have resolved itself