/srv/irclogs.ubuntu.com/2016/08/11/#ubuntu.txt

heroin	irc.spnet.net	00:00
OerHeks	but systemd got new tricks	00:00
sudormrf	cannot touch /forcefsck, read-only file system	00:00
sudormrf	going to have to reboot to live cd and fsck probably, right?	00:00
Gallomimia	recovery mode might give you some leeway	00:01
Gallomimia	but yeah. a liveCD can be very helpful	00:02
sudormrf	ok	00:02
sudormrf	one sec	00:02
Gallomimia	i've taken to keeping mine handy (USB keys) and labeled	00:02
sudormrf	should be something simple	00:02
BillTheKid	Gallomimia: i don't really know what to say now :p	00:02
BillTheKid	Gallomimia: where do i start reading?	00:03
Gallomimia	OerHeks: you're possibly the expertise i need. BillTheKid and i are troubleshooting his system. we've determined that fsck won't run properly on his LVM system. the filesystem seems.... defunct. any insight?	00:03
Mouaad	Hello, I just bough a new computer with intel i7-6500U (skylake) and amd radeon r7 , now what is the best ubuntu distribution to get both work (the processor and the graphical card) ?	00:03
OerHeks	ouch, LVM is not really something i have done often :-(	00:04
Gallomimia	Mouaad: 16.04	00:04
OerHeks	i read a lot of your conversation though	00:04
Gallomimia	OerHeks: i run it on my main system, and i still don't have any insight	00:04
bashduplicates	hello i was trying to install the fdupes command when i got this error message :	00:04
bashduplicates	E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?	00:04
Gallomimia	bashduplicates: you need to quit all programs that do installs	00:04
Mouaad	Gallomimia: but there is no fglrx in 16.04 !	00:04
Mouaad	is it okey ?	00:05
bashduplicates	i am using my laptop on a virtual box, and nothing else is open	00:05
Gallomimia	bashduplicates: also you need to run the install with privliges. sudo	00:05
bashduplicates	i used sudo	00:05
BillTheKid	Gallomimia, OerHeks, I wish I have not used it too. I have no understanding of how it works and bit my ass now...	00:05
OerHeks	bashduplicates, use or bash or softwarecenter/synaptic .. or are there updates pending?	00:05
Nitrigaur	Gallomimia,, I have to close the chat now, going to go ahead with the distribution upgrade.	00:05
Gallomimia	is the filesystem read/only?	00:05
Gallomimia	Nitrigaur: fabulous. good luck	00:06
Mouaad	it is not that simple to make hybrid-graphics work in 16.04...	00:06
bashduplicates	Galomimia : it worked	00:07
Gallomimia	Mouaad: er, i'm not sure actually. i switched to an nvidia card for that reason. but nvidia drivers got mainlined in 16.04. i've heard good things about it with radeons	00:07
OerHeks	Mouaad, yes, see the releasenotes https://wiki.ubuntu.com/XenialXerus/ReleaseNotes#fglrx	00:07
Gallomimia	i mean... updates	00:07
Gallomimia	i've a question. is it better to use the 16.04.1 install disk? is there something i should do to my installed system to update it to that version? what's the difference?	00:08
OerHeks	these GPUs are supported by the new AMDgpu™ RX 480 RX 470 R9 Fury/Fury X/Nano R9 M395X 390X M385 380X 360 290x 285 m270x 260x	00:08
Gallomimia	R7 is not in there.	00:09
OerHeks	Gallomimia, the 16.04 was delayed some days, iirc, but oke to keep using it. 16.04.1 would be faster deployment	00:09
Mouaad	I have: Intel Core i7-6500U and AMD Radeon R7 M360, but until now, i can't make them both work perfectly...	00:10
BillTheKid	Gallomimia: would it be possible in couple of words to tell me what we try to restore so I can start googling? :)	00:10
mustmodify	is this an error?	00:10
mustmodify	Or just ... the expected output? https://gist.github.com/mustmodify/dddddf4d8f15279d6a07734e49e2699c	00:10
Gallomimia	BillTheKid: i just searched for LVM superblock lost and found some interesting results	00:10
Gallomimia	the 2nd result	00:10
BillTheKid	thanks I'm going through it now	00:11
Gallomimia	aw there's no solution posted. but we should try looking at lsblk	00:13
OerHeks	Mouaad, seems like you ran into this bug	00:13
OerHeks	https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-amdgpu/+bug/1603989	00:13
ubottu	Launchpad bug 1603989 in xserver-xorg-video-amdgpu (Ubuntu) " Radeon R7 not work in ubuntu xenial " [Undecided,New]	00:13
OerHeks	if so, please confirm	00:13
Mouaad	yes I did have this	00:14
Gallomimia	mustmodify: does your system have an mdadm raid involved?	00:14
OerHeks	i have read lots of tricks to get sometimes a result, like blacklisting nouveau .. worth a try	00:15
Mouaad	I feel like trying 15.04.. there is drivers for my graphical card (http://support.amd.com/en-us/download/linux) and should support intel skylake processors...	00:16
mustmodify	Gallomimia: I don't know what that is, so I'll say no.	00:17
mustmodify	I mean, I know what RAID is, and no.	00:17
Gallomimia	then.. not sure why it's installed on your system. its not by default. i should think that error is not important	00:18
Gallomimia	BillTheKid: before you go much further, i suggest you post on the ubuntu forums for help. make a post like some of the ones you've seen, with all the pertinent outputs.	00:19
Gallomimia	also, we should look at the output of sudo lsblk	00:19
Bashing-om	Mouaad: See: https://ubuntuforums.org/showthread.php?t=2328993 . Maybe install the i965-va-driver ?	00:19
BillTheKid	Gallomimia: http://pastebin.com/WzpwE6b2	00:20
sudormrf	hmm....Oer	00:21
mustmodify	Gallomimia: ok, I'll take your word for it. :P	00:21
sudormrf	OerHeks, fsck /dev/sda1 reports clean, /dev/sda2 (extended) says can't read, /dev/sda5 (swap) says nothing	00:21
Gallomimia	BillTheKid: no surprizes there. still no idea how to repair the FS tho. sorry	00:22
BillTheKid	anyway Gallomimia, thank you so so much for trying to help me.	00:22
BillTheKid	really appreciate it...	00:22
Gallomimia	i hope you can get it fixed :(	00:23
Gallomimia	i've spent weeks at a time with my system being offline due to similar problems. but at least i was able to read my files from a liveUSB	00:23
sudormrf	reboot, still the same thing	00:24
Gallomimia	sudormrf: which of those 3 partitions is your root filesystem?	00:25
sudormrf	Gallomimia, /dev/sda1	00:25
Gallomimia	oh. and it said its clean..	00:25
Gallomimia	are you on a liveUSB right now?	00:26
sudormrf	yep	00:26
sudormrf	I was, just rebooted again. I can go back to the liveCD no problem	00:26
Gallomimia	it's still mounted r/o at this time? mount -l	00:26
sudormrf	in the liveCD environment?	00:26
Gallomimia	well, right now	00:26
Mouaad	bashing-om, i will give it a shot, meanwhile anyway to make sure that i965-va-driver would work for Intel Core i7-6500U and AMD Radeon R7 M360 ?	00:26
sudormrf	Gallomimia, same error when I log in directly	00:27
Gallomimia	it should still let us get a list of the mounts	00:27
sudormrf	Gallomimia, and yes, it is mounted as RO	00:27
bashduplicates	i am trying to run fdupes in the background but it doesnt respond...	00:27
Gallomimia	wonder why. try dmesg \| tail	00:28
sudormrf	Gallomimia, /dev/sda1 on / type ext4 (ro,relatime,data=ordered)	00:28
sudormrf	ok	00:28
Bashing-om	Mouaad: Well .. in 16.04 I am not certain of anything I might know in respect to ATI hybrid graphics .	00:28
sudormrf	Gallomimia, that isn't showing me much. only a cgroup entry	00:28
Gallomimia	sudormrf: you're looking for error messages about the drive	00:28
Gallomimia	uh... i think if you change the tail to less	00:28
sudormrf	Gallomimia, just did that ;D	00:29
sudormrf	scrolling throuhg now	00:29
Gallomimia	if you just do dmesg it will give you tons of output. that might be all you need	00:29
Gallomimia	i think the END key would work, and scroll up?	00:29
Gallomimia	well. who knows... i'm not an expert at finding logged errors	00:29
gebbione	i am seeing errors (EE) open /dev/dri/card0: No such file or directory	00:30
gebbione	any suggestions on what to do?	00:30
gebbione	ubuntu is stuck on blackscreen	00:31
sudormrf	so far nothing is jumping out at me	00:31
sudormrf	still looking at it	00:31
YankDownUnder	gebbione: When did this start happening?	00:31
gebbione	after uninstalling the old propritory amd driver	00:32
Jordan_U	sudormrf: Please pastebin the output of "sudo blkid" and "sudo parted -l".	00:32
YankDownUnder	gebbione: How exactly did you "un-install" the driver?	00:33
sudormrf	Jordan_U, ok, one sec	00:33
gebbione	from synaptic	00:33
gebbione	then checked modprobe	00:33
gebbione	and now blacklisted amdgpu	00:33
Jordan_U	sudormrf: Have you checked the drive's S.M.A.R.T. status? ( you can do so with gnome disks).	00:33
gebbione	but the device error sounds like a different problem	00:34
sudormrf	Jordan_U, blkid: http://paste.ubuntu.com/22975295/	00:34
sudormrf	Jordan_U, parted: http://paste.ubuntu.com/22975373/	00:34
=== boomer is now known as bitch
YankDownUnder	gebbione: Ok...fair enough, how about running this in a terminal: sudo apt-get update && sudo apt-get upgrade && sudo apt autoremove && sudo apt autoclean => then see if you're still getting that crappy error, eh?	00:35
sudormrf	Jordan_U, it's not installed ATM. I would have to do it from a live CD	00:35
sudormrf	unless there is another package other than smartmontools	00:35
Gallomimia	BillTheKid: checking the disk's smart status is something you should also do. just to see if the drive is doing alright. no reason to think its not yet	00:36
gebbione	YankDownUnder, i have no network and no update is running as everything looks up to date	00:36
Jordan_U	sudormrf: Gnome Disks comes with Ubuntu by default.	00:36
sudormrf	Jordan_U, ah, one sec	00:37
Jordan_U	sudormrf: And it would be best to do all of this via a LiveUSB anyway.	00:37
BillTheKid	Gallomimia: I checked with disks tool on gUI it says its ok	00:38
BillTheKid	Gallomimia: https://linuxexpresso.wordpress.com/2010/03/31/repair-a-broken-ext4-superblock-in-ubuntu/	00:38
sudormrf	Jordan_U, gotcha. booting in to the liveCD now	00:38
BillTheKid	any thoughts?	00:38
YankDownUnder	gebbione: Ok - then what about: sudo apt autoremove && sudo apt autoclean => ??	00:38
BillTheKid	I'm about to do the last commands	00:38
BillTheKid	sudo mke2fs -n /dev/ubuntu-vg/root	00:38
sudormrf	Jordan_U, disk shows OK in gnome disk	00:39
BillTheKid	gave me back the backups of the supperblocks	00:39
gebbione	YankDownUnder, auto remove suggests removing 850mg of stuff	00:39
gebbione	haven't run auto clean	00:39
YankDownUnder	gebbione: yes...that sounds about right - what? Are you worried about "apt" removing things that might cause you issues?	00:40
gebbione	yes	00:40
Gallomimia	BillTheKid: it does seem like a good way to go	00:40
gebbione	indeed	00:40
Jordan_U	sudormrf: The order of things to do once in the Live CD/USB : first check the smart status, then "sudo fsck -f /dev/sda1" (which causes fsck to check the filesystem even if it was unmounted cleanly).	00:40
Gallomimia	oh. if you have results, i think you're about to fix the problem!	00:40
gebbione	i had fglrx and after removing it i have this problem now	00:40
gebbione	so i am a bit worried	00:41
YankDownUnder	gebbione: Your choice. "autoremove" generally removes configurations, drivers, stale programs unwanted or outdated things...	00:41
sudormrf	Jordan_U, doing the fsck -f now. let's see how that goes	00:41
sudormrf	I was just doing fsck /dev/sda1 before.	00:41
BillTheKid	Gallomimia: from the logs that you told me to check I know "blk_update_request: I/O error, dev sda, sector 503816"	00:41
BillTheKid	the sudo mke2fs -n /dev/ubuntu-vg/root returns:	00:41
BillTheKid	mke2fs 1.42.13 (17-May-2015) Creating filesystem with 239951872 4k blocks and 59990016 inodes Filesystem UUID: 79f178fa-2cb1-4404-82f2-c7e7b7a34865 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848	00:42
BillTheKid	any intuition of which block should I choose? is the sector number of the log related to the block numbers above?	00:42
sudormrf	Jordan_U, ok, no errors or anything. next suggestion?	00:42
Jordan_U	YankDownUnder: gebbione: apt autotemove (without --purge) won't ever remove configuration files.	00:42
Gallomimia	BillTheKid: the instructions say the first one. but really any should do	00:43
Gallomimia	BillTheKid: i wonder what that error in the logs means?? maybe that's where the corrupted info on the filesystem is	00:44
Jordan_U	sudormrf: Boot back into your installed system and pastebin the output of "dmesg --human". That should tell us what error caused the kernel to remount ro.	00:45
sudormrf	Jordan_U, okie dokie :)	00:45
Gallomimia	BillTheKid: before doing the reboot, i would try running the fsck on it, and try mounting it	00:45
gebbione	Jordan_U, it made no difference anyway	00:45
sudormrf	Jordan_U, http://paste.ubuntu.com/22976437/	00:46
BillTheKid	Gallomimia: that's why I asked if the sectors and the block numbers are related	00:47
BillTheKid	Gallomimia: I'll try to fsck it again :)	00:47
Gallomimia	they are related a bit. but the LVM makes them remapped	00:47
BillTheKid	it's deleting ynodes now	00:48
BillTheKid	inodes	00:48
BillTheKid	Superblock needs_recovery flag is clear, but journal has data. Recovery flag not set in backup superblock, so running journal anyway. /dev/ubuntu-vg/root: recovering journal Pass 1: Checking inodes, blocks, and sizes Deleted inode 10499058 has zero dtime. Fix<y>? yes	00:48
Gallomimia	sounds pretty good to me!	00:50
Gallomimia	the journal is exactly the thing that your drive will now use to recover whatever got corrupted when the crash happened	00:51
BillTheKid	Block bitmap differences: -(42299169--42299176) -(42388132--42388144) -(42416874--42416886) -(42420453--42420465) -(42420490--42420491) -(42445372--42445413) -(42451976--42451984) -(42466933--42466934) -(42467077--42467078) -42467105 -42467305 -(42582033--42582042) -(42613933--42613945) -(42614010--42614022) -(42652340--42652352) -(42683157--42683169) -(42696299--42696311) -(171236045--171236057) -(171254794--171254806) -(17132395	00:52
BillTheKid	Free blocks count wrong for group #1 (31743, counted=8872). Fix<y>?	00:53
sudormrf	Jordan_U, looks like UUID issue?	00:53
BillTheKid	I assume I keep pressing yes	00:53
Gallomimia	your guess is as good as mine	00:53
Gallomimia	the reason to run fsck is to fix all this stuff...	00:53
sudormrf	Jordan_U, I just tried this: mount -o remount,rw / and it says: can't find uuid=UUID HERE	00:53
Gallomimia	sudormrf: you don't really want to mount something at / while your system is running	00:54
BillTheKid	it is insane how many confirmations it has	00:54
sudormrf	Jordan_U, looking at the UUID from blkid and the uuid in the fstab there is a discrepancy	00:54
BillTheKid	I am on number 1200	00:54
Gallomimia	BillTheKid: sounds like you broke a lot of stuff during that crash	00:54
BillTheKid	do you think i can stop it and force yet?	00:54
BillTheKid	*yes	00:54
=== gebbione is now known as gebbione_
Gallomimia	maybe	00:54
BillTheKid	hahaha	00:55
sudormrf	Gallomimia, based off of what I am describing does it seem like the UUID went wonky?	00:55
Jordan_U	sudormrf: That would do it. That would mean that systemd would never remount it rw.	00:55
Gallomimia	sudormrf: the mount command is supposed to have 2 options. since you only gave it one, it's searching for the rest of the data in your /etc/fstab	00:55
Jordan_U	sudormrf: sudo mount -o remount,rw /	00:55
sudormrf	Jordan_U, ok I am going to modify the fstab	00:55
sudormrf	Jordan_U, yeah, that is what gave me the UUID error	00:55
sudormrf	so I will need to modify the fstab with the right UUIDs for both /dev/sda1 and /dev/sda5	00:56
sudormrf	rebooting to the liveCD. woop woop	00:57
Gallomimia	if you fixed the problem, should reboot to the installed system	00:58
BillTheKid	I wonder how many ppl are from livecd in here :p	00:58
sudormrf	Gallomimia, I was in the installed system. rebooting to the livecd to try the fix (ro fs means can't modify fstab), will reboot after that	00:58
sudormrf	one sec :_	00:58
sudormrf	:)	00:58
Gallomimia	heh. probably lots. but its usually recommended to use a separate system to connect to IRC while you troubleshoot boot problems	00:58
Gallomimia	sudormrf: ohhhhh of course	00:58
Gallomimia	what's broken about the fstab tho?	00:59
sYmbio	hi, anyone know how to have one exploitation system per session ? (if that's possible)	00:59
sudormrf	Gallomimia, wrong UUIDs for the drive	00:59
Gallomimia	by the way, the UUID is not required in fstab. its just better than /dev/sdXY	00:59
Gallomimia	hm. wonder how that happened	00:59
sudormrf	Gallomimia, yes I know, but I am using them as a pointer	01:00
sudormrf	I do as well xD	01:00
Gallomimia	oh well	01:00
Gallomimia	BillTheKid: uh, how far along is it?	01:00
BillTheKid	i am running it one more time to see what is going to report	01:02
BillTheKid	then try fsck	01:02
BillTheKid	then mount	01:02
BillTheKid	then pray to al lthe gods	01:02
Gallomimia	then reboot and make backups	01:02
BillTheKid	if I tell u that yesterday my dropbox filled up and deleted a bunch of stuff? :p	01:03
sudormrf	ok, fstab modified, rebooting now	01:03
Gallomimia	oh dear :( dropbox isn't that good of a backup system	01:04
sudormrf	no it isn't	01:04
Gallomimia	they get to look thru all your files!	01:04
sudormrf	^^	01:04
Gallomimia	backups need to be physically in your hands. or they're not really backups. they're more like wishing upon a star.	01:05
Gallomimia	BillTheKid: i hope you'll consider reading some of the writings of one Richard Stallman	01:05
sudormrf	well...that was odd	01:05
sudormrf	ok	01:05
BillTheKid	Gallomimia: i don't upload unencrypted sensitive stuff :p	01:06
BillTheKid	the rest are papers and shit that I collect. :p	01:06
SchrodingersScat	!info duplicity	01:06
ubottu	duplicity (source: duplicity): encrypted bandwidth-efficient backup. In component main, is optional. Version 0.7.06-2ubuntu2 (xenial), package size 173 kB, installed size 1088 kB	01:06
BillTheKid	but good points you raised...	01:06
sudormrf	!language	01:06
SchrodingersScat	duplicity can gpg encrypt and then use dropbox/etc as a backend, so you don't have to trust them, just gpg	01:06
ubottu	The main Ubuntu channels require that you speak in calm, polite English. For other languages, please visit https://wiki.ubuntu.com/IRC/ChannelList	01:06
BillTheKid	"they're more like wishing upon a star."	01:06
BillTheKid	that's hilarious	01:06
Gallomimia	oops yeah. no swearing allowed :/	01:06
sudormrf	Gallomimia, going to change the uuid to just /dev/sda1	01:06
BillTheKid	ok check did not complain	01:06
Gallomimia	i've tripped on that rule more than once	01:07
Gallomimia	sudormrf: it should suffice to get things going. i think it's just to keep from having the bios goof something up on you when hardware gets added or changed	01:07
Jordan_U	sudormrf: Don't do that. UUIDs are used for a reason.	01:07
sudormrf	Jordan_U, it dropped me to emergency mode...	01:08
sudormrf	rebooted back to the livecd	01:08
Gallomimia	Jordan_U: i'd like to read about that reason	01:08
BillTheKid	i can see my drive!	01:08
Gallomimia	awesome	01:09
BillTheKid	do u have a "buy me a beer button?"	01:10
Gallomimia	ah, no i don't	01:10
Gallomimia	also, i don't drink so, i'm trying to give some beer away	01:10
Jordan_U	sudormrf: Please pastebin your /etc/fstab, with the corrext UUIDs.	01:10
sudormrf	Jordan_U, ok. one sec	01:10
BillTheKid	there is a buy mea coffee button too	01:10
Gallomimia	sudormrf: uuid's are not something you need to keep secret	01:10
BillTheKid	Gallomimia: i'm going for the reboot	01:11
Gallomimia	well i've neglected to set one up. hearing its fixed is all i want	01:11
BillTheKid	hopefully I'll login and thank you once more	01:11
sudormrf	Gallomimia, I know	01:11
Jordan_U	Gallomimia: Device enumeration is not deterministic. What is /dev/sda1 on one boot might be /dev/sdb1 on another. Especially (but not only) if you throw removable media into the mix.	01:12
sudormrf	was checking something. rebooting to livecd now	01:13
sudormrf	one moment	01:13
=== mo is now known as Guest8546
BillTheKid	it worked!!!	01:16
BillTheKid	who knows how many files were deleted...	01:17
sudormrf	Jordan_U, ok so blkid (for reference): http://paste.ubuntu.com/22979238, and fstab: http://paste.ubuntu.com/22979242/	01:17
BillTheKid	Gallomimia: guess what I'll be doing now. https://www.youtube.com/watch?v=2g76DUy7jKY	01:17
sudormrf	Jordan_U, rebooting with the fstab that way drops me to emergency mode	01:18
=== JanC is now known as Guest62829
=== JanC_ is now known as JanC
sudormrf	if i revert the fstab back to the old UUIDs it doesn't drop me to emergency mode	01:18
-zifql:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:22
-htsik:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:22
-yybhliy:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:22
-yybhliy:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:22
-wqqkzfn:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-vxegll:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-wgjkaf:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-vqtyuzs:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-wqqkzfn:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-vxegll:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-wqqkzfn:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
-vxegll:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:23
sudormrf	Jordan_U, suggestions?	01:23
-iqffw:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:24
-wwbxwf:#ubuntu- #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE! #WRONGPLANET SAYS THAT WITH UBUNTU YOU LOSE!		01:24
BillTheKid	bye guys!	01:26
BillTheKid	thanks again A LOT for your help	01:26
sarek	whats it called when you can like ssh(or access however) into a remote computer and that computer's localhost or like 127.0.0.1 is now yours? Not the other way around	01:31
Jordan_U	sudormrf: I don't think it should make a difference, but try adding the option "defaults" to make it "defaults,errors=remount-ro".	01:32
=== Khaotic is now known as Programmer
=== Programmer is now known as Khaotic
sudormrf	ok, one sec	01:33
orlock	sarek: local/remote port forwarding via ssh	01:33
sudormrf	Jordan_U, done, rebooting now	01:33
sudormrf	Jordan_U, I think it is going to fail again	01:35
Guest65478	hi	01:36
Guest65478	quit	01:36
sudormrf	Jordan_U, it dropped me to emergency mode	01:36
Jordan_U	sudormrf: Check dmesg at the "emergency mode" shell.	01:36
Jordan_U	sudormrf: And journalctl, if available.	01:37
sudormrf	Jordan_U, ok, I just did ctrl+d, but I am sure it will fail again	01:37
sudormrf	just rebooted	01:38
sudormrf	letting it fail again	01:38
sarek	uh thanks orlock ill google that	01:39
sudormrf	Jordan_U, how to check journalctl	01:40
sudormrf	just journalctl?	01:40
MannyLNJ	[Advice Needed] One of my mail providers does not offer IMAP only POP. I want to run my own IMAP server so I can access my mail from my Tablet. I want to still use my mail provider's outgoing mail service. What is the best way to do this on Ubuntu?	01:40
sudormrf	Jordan_U, not seeing anything that tells me why it's happeing in dmesg, could be missing something	01:42
sudormrf	I see in journalctl where it is mounting it as ro	01:43
sudormrf	there is a start up job that is timing out	01:44
sudormrf	but that is because I unplugged the drive	01:44
sudormrf	annnd now it's working	01:46
sudormrf	lol	01:46
sudormrf	I suppose the UUID + that external drives really were the kicker	01:46
sudormrf	hte UUIDs obviously being the most important	01:46
=== vemacs_ is now known as vemacs
=== OERIAS is now known as Uerius
mjs7231	Anyone know if I install VMWare and Qemu on the same machine, will they work together, or will the Kernel get mad?	01:53
=== Uerius is now known as OERIAS
=== daynaskully is now known as dskull
clintmint	which version of Ubuntu should i use if I need to use steam with AMD proprietary drivers	02:02
tgm4883	clintmint: probably 14.04	02:02
=== jeff____ is now known as silvercoins
clintmint	ok thats what i concluded ws well	02:02
tgm4883	clintmint: it depends on what AMD card you have though	02:02
clintmint	r9 270x	02:03
tgm4883	clintmint: hmm, I think that's supported by AMDGPU	02:03
clintmint	the open source drivers have been working fine on Fedora 24 but since I started trying to play team fortress it freezes everytime	02:03
clintmint	so I need to switch distros	02:04
clintmint	AMDGPU is the open source version right	02:04
tgm4883	clintmint: I'm not super clear on that. AMDGPU are the ones developed by AMD, radeon is the open source ones	02:05
tgm4883	although AMDGPU is open source as well?	02:05
tgm4883	I've not been following the AMD stuff super close as I have an nvidia card and probably won't upgrade for 2-3 more months	02:05
clintmint	yea its the latest effor by amd to open source it	02:06
clintmint	per https://wiki.archlinux.org/index.php/AMDGPU	02:06
=== sins-_m is now known as sins-
clintmint	alright im just gonna try 14.04 again lets see what happens :S	02:07
tgm4883	ok	02:08
* tgm4883 goes back to launching kerbals to certain doom		02:08
=== li is now known as Guest4475
ac2	hey, some of the documentation is little unclear, but is somewhere online that breaksdown package difference between ubuntu minimal vs a server install?	02:25
tgm4883	ac2: minimal downloads packages from the internet during installation based on what you select	02:27
ac2	tgm4883: similar to a mini.iso install?	02:28
tgm4883	ac2: yea https://help.ubuntu.com/community/Installation/MinimalCD	02:28
ac2	tgm4883: I guess what I've struggled to fully understand is the necessary steps/installs to take a minimal install and make it the equivalent to a server install	02:31
ac2	tgm4883: usually when I install a fresh ubuntu server image I just select openssh-server and thats it	02:32
tgm4883	ac2: you'd need to install the server packages, not sure if there is a metapackage for server	02:32
ac2	tgm4883: recently I did a mini.iso install on a vps and there was a server package listed amongst various desktop gui environments, but I'm not sure what that server package includes and what I could be missing	02:33
tgm4883	ac2: well that server package from the mini.iso would get you ubuntu-server	02:34
=== nerd is now known as Guest9428
ac2	tgm4883: and to make sure the minimal is only command line?	02:36
tgm4883	ac2: it can be, if you don't select the desktop stuff	02:39
tgm4883	I'd probably just download and install ubuntu-server though	02:39
ac2	tgm4883: perfect, thanks for help. really appreciate you outlining some of this	02:40
=== root is now known as Guest29230
Guest29230	hello everyone	02:45
Guest29230	1	02:46
Guest29230	i	02:47
miharu	hello.	02:48
miharu	So... anyone can point me to resources about gdm3, GNOME, and display manager?	02:51
tootights	Hello, MTW	02:51
miharu	preferably something that can be digested by a new ubuntu user.	02:51
tootights	the edges on my prints are curling up. I've just switched to ABS and its still an issue. Could someone suggest some things a should try to minimize that?	02:54
=== Pete_ is now known as DF3D2
tootights	Hello, MTW	03:01
=== cigumo_ is now known as cigumo
=== dreamon_ is now known as dreamon
amir107	hey	03:09
SpammerHeroYt	hey SpammerHeroYt check out this cool website http://forums.mcrafters.ml	03:12
SpammerHeroYt	hey SpammerHeroYt2 check out this cool website http://forums.mcrafters.ml	03:12
SpammerHeroYt2	hey SpammerHeroYt2 check out this cool website http://forums.mcrafters.ml	03:12
SpammerHeroYt	hey lisroach check out this cool website http://forums.mcrafters.ml	03:12
SpammerHeroYt2	hey lisroach check out this cool website http://forums.mcrafters.ml	03:12
FoeHammered	I'm trying to install Aleph One, which has libboost-all-dev as a dependency. This shows up as a broken package for me, and my efforts to nail down what in it is broken have been a bit abortive. It has been suggested my system is borked somehow. How do I proceed?	03:19
racoonsrage	hello	03:20
Bashing-om	!info libboost-all-dev	03:20
ubottu	libboost-all-dev (source: boost-defaults): Boost C++ Libraries development files (ALL) (default version). In component universe, is optional. Version 1.58.0.1ubuntu1 (xenial), package size 2 kB, installed size 10 kB	03:20
Bashing-om	FoeHammered: show us in a pastebin ' apt-cache policy libboost-all-dev ' . Then we see where we go from there .	03:21
FoeHammered	http://pastebin.com/2GusbVih	03:22
FoeHammered	Bashing-om, there's the pastebin.	03:23
Bashing-om	FoeHammered: K; and what results in attempting to install ' sudo apt install libboost-all-dev ' ?	03:24
FoeHammered	Interesting question. I'd been using the apt-get command.	03:25
FoeHammered	Bashing-om, libboost-all-dev : Depends: libboost-python-dev but it is not going to be installed	03:25
FoeHammered	E: Unable to correct problems, you have held broken packages.	03:25
tgm4883	FoeHammered: pastebin the full output	03:25
Bashing-om	FoeHammered: apt is the re-written apt-get ..	03:26
FoeHammered	http://pastebin.com/UnkPnPJ5	03:26
tgm4883	FoeHammered: follow the chain, what happens if you 'sudo apt install libboost-python-dev'	03:28
FoeHammered	libboost-all-dev -> libboost-python-dev -> libboost-python1.58-dev -> python-dev -> python2.7-dev* -> libpython2.7-dev*	03:30
FoeHammered	* also libpython-dev, * also libexpat1-dev	03:30
tgm4883	FoeHammered: Does one of those give you a better reason as to why it can't be installed?	03:30
FoeHammered	Not so far, tgm4883.	03:31
FoeHammered	A problem with my repositories or something, perhaps?	03:31
tgm4883	FoeHammered: perhaps if you added some weird ones	03:32
trism	FoeHammered: do you have -updates and security disabled? software-properties-gtk updates tab	03:32
Bashing-om	tgm4883: FoeHammered Do we have a packaging conflict ( my reference is 14.04 ) apt-cache rdepends libboost-python-dev >> Reverse Depends: libboost-python-dev:i386 , compare : apt-cache depends libboost-python-dev >> Conflicts: libboost-python-dev:i386 ?? Do I understand this correctly ??	03:32
FoeHammered	That's odd... I've got it set to automatically check for updates daily, but the Install Updates From has nothing checked.	03:33
FoeHammered	Bashing-om: To be honest, I didn't quite follow the question.	03:33
Bashing-om	FoeHammered: Await the knowledge of tgm4883 I do not see how it is possible to have a dependency and it still be in conflict .	03:34
FoeHammered	tgm4883, shall I simply try to install something random?	03:35
tgm4883	FoeHammered: what's the output of 'sudo apt update'	03:36
FoeHammered	tgm4883, http://pastebin.com/04XJX31Z	03:37
tgm4883	FoeHammered: well that's interesting	03:38
FoeHammered	Looks like it's all openxcom and wine stuff remaining to be updated.	03:38
tgm4883	FoeHammered: can you pastebin your /etc/apt/sources.list file	03:40
FoeHammered	Uh... looks like I don't have to pastebin it. Just says: deb http://us.archive.ubuntu.com/ubuntu/ xenial main universe	03:41
FoeHammered	That seems small.	03:42
tgm4883	FoeHammered: yea that's not enough I don't think I would bet it's looking for files in another repo	03:42
FoeHammered	sources.list.d has the openxcom and wine-staging stuff inside it.	03:43
FoeHammered	Nothing else, though.	03:43
tgm4883	FoeHammered: well without going down that chain, you could try adding the other repos back in https://help.ubuntu.com/community/Repositories/Ubuntu	03:46
trism	FoeHammered: check the two boxes in software-properties-gtk to add back -updates and security, run sudo apt-get update; and try installing your lib again	03:48
FoeHammered	Much better so far.	03:50
FoeHammered	tgm4883, trism, this time it doesn't balk and complain of broken packages.	03:50
FoeHammered	I may yet encounter more trouble. I wonder how that happened, anyway... Probably followed some line of thought, fixed one problem by breaking everything else.	03:50
FoeHammered	I may yet find out!	03:51
FoeHammered	That's a strange number of ping timeouts.	03:52
SchrodingersScat	FoeHammered: everything is strange, when you're a stranger.	03:54
FoeHammered	SchrodingersScat: S'truth. I've been using IRC since childhood, and Ubuntu for years, and I'm shockingly incompetent with both.	03:54
=== BCCI is now known as Schroders
=== coup_de_shitlord is now known as Guest88813
outlawkev	kids	04:27
outlawkev	hi	04:27
outlawkev	I need help installing ubuntu	04:27
cfhowlett	"kids"? really?	04:27
outlawkev	Toshiba A305 older laptop, running win 7	04:28
outlawkev	well, kids is all a state of mind really	04:28
BlackFlag	How to change desktop environment in Ubuntu 16.04?	04:28
outlawkev	I downloaded ubuntu and it was saved as ISO file	04:29
cfhowlett	BlackFlag, install the other environment. logout. choose the other DE. login.	04:29
krwq	outlawkey, read the ubuntu website, it has instructions	04:29
cfhowlett	!install \| outlawkev	04:29
ubottu	outlawkev: Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall - Don't want to use a CD? See http://tinyurl.com/3exghs - See also !automate	04:29
outlawkev	burned to a dvd, and tried to run it, dvd will only read as a file waiting to be burned	04:29
BlackFlag	Its not working like in 14.04. The ubuntu logo is not appearing., cfhowlett	04:29
FoeHammered	Yay! Thanks, tgm4883 trism, Bashing-om! It works!	04:30
cfhowlett	BlackFlag, what DE did you install?	04:30
outlawkev	I read the install directions	04:30
FoeHammered	I'm'a leave now.	04:30
BlackFlag	LXDE	04:30
krwq	outawkev: use usb drive	04:30
BlackFlag	cfhowlett, LXDE	04:30
outlawkev	so many moving parts to keep track of ............	04:30
cfhowlett	BlackFlag, logout. you should see a gear / logo type image on the page. left or right click on that for the dropdown menu	04:30
BlackFlag	cfhowlett, I will try again... ty	04:31
cfhowlett	happy2help!	04:32
BlackFlag	cfhowlett, the logo doesn' appear. I googled and I found this guy with the same issue and the picture on the link shows how the login screen looks like https://askubuntu.com/questions/696748/how-to-change-desktop-environment-in-ubuntu-15-10	04:39
cfhowlett	BlackFlag, are on on a virtual machines??	04:40
BlackFlag	cfhowlett, no	04:40
=== krc4267_ is now known as krc4267\|sleep
Nirvash	Hey everybody! I just installed Ubuntu via Crouton and I'm seeing (precise)nirvash@localhost in every terminal window. How do I remove (precise) from the hostname?	04:49
linux	Hi	05:13
=== coup_de_shitlord is now known as Guest73932
linux	How I can convert my current ubuntu to Iso file for install it on another computer?	05:14
=== erasmus is now known as Guest95499
cfhowlett	!cloning \| linux	05:16
ubottu	linux: To replicate your packages selection on another machine (or restore it if re-installing), you can use the !software package "apt-clone" - See also !automate	05:16
=== Guest95499 is now known as Erasmus_
linux	Thank you.	05:18
cfhowlett	happy2help! linuxgeek	05:18
Rexy	Hey Guys, I've run into a weird problem with Ubuntu Desktop 16.04.1 With a fresh install and I installed I3wm, I removed all the unity stuff and tried to configure LightDM to start i3 instead. Problem is that A) The config file is blank, and B) when I open the backup file in /usr/share/doc/Lightdm/lightdm.conf.gz it comes up in unreadable characters. Any ideas? I'm at a loss of even what to	05:31
Rexy	google	05:31
vroap	Rexy: What's the output of "file /usr/share/doc/Lightdm/Lightdm.conf.gz?	05:34
vroap	Rexy: What's the output of "file /usr/share/doc/Lightdm/Lightdm.conf.gz"?	05:34
Rexy	vroap give me a moment I'm just booting up the system. When I went I used cat it transformed my system into unreadable chars	05:34
Rexy	vroap "gzip compressed data, max compression, from Unix"	05:35
Rexy	oh wait a second	05:35
Rexy	god damnit	05:35
rovap	Sorry my cellular connection is a bit dodgy	05:35
rovap	What?	05:35
Rexy	rovap: It's a gzip archive, not a text file	05:36
rovap	Yeah	05:36
rovap	I thought so	05:36
rovap	It's early. I'm tired. I just wanted to make sure	05:36
Rexy	What app should I use to extract it	05:36
Rexy	Been having nothing but problems making i3 my manager	05:37
rovap	Hmm :/	05:37
rovap	Hold on a sec	05:37
lotuspsychje	Rexy: perhaps try in #i3 ?	05:38
Rexy	lotuspsychje: The problem seems to be with LightDM rather than I3	05:39
Rexy	I'll mess around with it, but I finally got a config file for it	05:39
rovap	Rexy: the syntax for gzip is "gzip -d <Filename here.gz"	05:39
rovap	Rexy: the syntax for gzip is "gzip -d <Filename here>.gz" **	05:40
electroninja	hello	05:40
Rexy	rovap: Thanks already got it extracted. Rebooting now to see if it'll boot to I3	05:40
lotuspsychje	Rexy: talk to ducasse, he has i3 and unity removed aswell	05:40
rovap	Rexy: okay cool	05:40
rovap	Hello electroninja	05:41
Rexy	lotuspsychje: It seems to have more to do with me messing around. I'll get it sorted	05:41
Rexy	Aha it works now. :D	05:41
rovap	Great! :D	05:41
Rexy	Problem was that the lightdm.conf file was empty, and when I removed unity it must've taken it with it	05:41
rovap	Oh okay :)	05:41
Rexy	If I was to install it on a laptop, and use the "Install next to X" option, would it mess with my partitions?	05:42
Rexy	I'd love to have ubuntu on my laptop but I can't delete the recovery partition due to it having the product key I need incase I take my laptop in to claim warranty	05:42
ruijanpallas	Morning everyone! I'm using my ps3 sixaxis controller with xboxdrv to play some NES roms and everything works fine, pressure sensors and all. BUT the left D-pad is not responsing as analog input, while all the other buttons are. Any ideas?	05:43
cfhowlett	Rexy, windows + virtualbox + ubuntu = ubuntu on your laptop	05:45
Rexy	cfhowlett Thanks for the suggestion but that's no fun!	05:48
=== txspud_ is now known as txspud
=== mpontillo_ is now known as mpontillo
=== Feren^IRCCloud_ is now known as Feren^IRCCloud
=== tombee_ is now known as tombee
=== themill_ is now known as themill
=== MrRobot7_ is now known as MrRobot7
=== wmp is now known as Guest53786
=== HeN_ is now known as HeN
=== madaeon is now known as Guest99153
=== ueberall is now known as uebera\|\|
=== regedit_ is now known as regedit
=== tgm4883_ is now known as tgm4883
=== OliPicard_ is now known as OliPicard
Rexy	Anyways thanks for the help guys!	05:50
=== wizonesolutions_ is now known as wizonesolutions
=== elijah_ is now known as elijah
=== JackMc_ is now known as JackMc
=== serverascode_ is now known as serverascode
=== nova is now known as e2w
=== e2w is now known as ennova
jcjordyn120	go join #thelinuxgeekcommunity	06:13
=== sayur is now known as tama
=== tama is now known as sayur
=== berglh_ is now known as berglh
ruijanpallas	Morning everyone! I'm using my ps3 sixaxis controller with xboxdrv to play some NES roms and everything works fine, pressure sensors and all. BUT the left D-pad is not responsing as analog input, while all the other buttons are. Any ideas?	06:26
backbox	hey everybody	06:27
beremaran	hey	06:28
backbox	from which part of this globe do u belong	06:28
beremaran	europe	06:28
backbox	trying to instal this distro into my pc but its giving me hard time	06:29
beremaran	what kind of hard time?	06:30
backbox	its not detecting my HD	06:30
backbox	So cant install it	06:31
beremaran	wow	06:31
beremaran	normally, any distros doesn't support any hd	06:32
beremaran	what :D	06:32
dwago	Hello all	06:43
=== Schroders is now known as AC130
V7	dwago: o/	07:13
DNS	hi... i installed for a friend the 2nd time xenial next to windows8.1 on a sony vaio.. but everytime windows boots the mbr is gone... any ideas how to fix that?	07:20
DNS	uefi is enabled, but secure boot is turned off tho	07:24
kk__	hi, I am using 16.04 LTS on my lenevo laptop. my system is getting locked automatically once I unlock the sysytem hardly it wil open for 6 to 7 sexonds and lockes her self automatically I have already disabled the locking featute inspite of that it continously lockes	07:31
kk__	dont no how to resolve it	07:31
kk__	can any obe please advise me on this	07:31
kk__	even I tried to boot using earlier kernel but still I am facing the same issue	07:33
=== johnl is now known as Guest21473
kk__	hi, I am using 16.04 LTS on my lenevo laptop. my system is getting locked automatically once I unlock the sysytem hardly it wil open for 6 to 7 sexonds and lockes her self automatically I have already disabled the locking featute inspite of that it continously lockes	07:35
Slartibart	I've created a .sh file with some things that I need to run from time to time. Among them are a couple of systemctl service calls, needing sudo privileges, e.g 'systemctl start courier-authdemon'. When I run that line in bash I'm asked for my password, but when I run 'sudo start_dev.sh' I get 'Failed to start courier-authdemon.service: Unit courier-authdemon.service not found.'	07:37
Slartibart	What's the difference here?? Shouldn't sudo mybashfile.sh run the commands in it with sudo privileges?	07:38
Triffid_Hunter	Slartibart: perhaps environment not set up properly or something? try sudo -i	07:38
Slartibart	Triffid_Hunter: Ok, I entered the path to the sh file now alone in bash. The script ran,but I got the same errors(Unit not found for all service start calls)	07:40
Slartibart	(..after sudo -i, I mean)	07:41
Slartibart	I'm stumped.	07:41
=== jatt is now known as Guest56572
=== croppa_ is now known as croppa
Slartibart	Could it be because of systemctl vs upstart in some way?? But it works entering the systemctl start lines one by one in bash..	07:44
ikonia	Slartibart: it has to be a typo in the script	07:45
ikonia	cut and paste the line in the script	07:45
Slartibart	I created a file for courier-authdemon in /etc/systemd/system/ (empty, touch /etc/systemd/system/courier-authdemon.service). Now I get 'Failed to start courier-authdemon.service: Unit courier-authdemon.service is masked.' instead, while the other service line messages are as before.	07:47
Slartibart	ikonia: Ok, hang on	07:47
Slartibart	http://pastie.org/private/d7sohc3w8ltzfchm5bfqng	07:48
Slartibart	I know there are two lines with courier-authdemon, I just wanted to test for differences.	07:48
Slartibart	Same message returned for both lines, anyways	07:49
cihhan	hi all! im trying to set my ubuntu server date -- it is 1 hour late. I am trying ntpdate but it s not updating. I am trying date -s "time info here" but somehow this is not working either. do you have any suggestions?	07:49
DNS	it seems to be a bad time for asking questions	07:50
Triffid_Hunter	cihhan: timezone set wrong?	07:50
QuestionBoy95	Hello, is it possible to install triple boot? ubuntu, windows, kali-linux	07:50
DNS	QuestionBoy95: sure	07:51
cihhan	Triffid_Hunter, it seems to be correct	07:51
ikonia	Slartibart: your paste isn't working, so I can't comment	07:51
Slartibart	ikonia: "Isn't working"? As in broken link or what? Strange, I'll double check.	07:52
cihhan	Triffid_Hunter, it shows the same -- i have 2 more machines and they seem to accept it correctly... but the 3rd one is a bit stubborn.... :@	07:53
ikonia	invalid link	07:53
cihhan	Triffid_Hunter: So any ideas?	07:54
Slartibart	ikonia: No it's not. Some cloudflare or something issues for pastie.org it seems, I got 500 responses at first but now it loads for me.	07:54
Slartibart	Thanks for trying though	07:54
slazer	hi, I've some Windows apps that fail to run under Wine Staging (1.9), is there some possibility to use full virtualization (my nb has VT-x), but not the full-blown VMWare-like Windows os?	07:56
slazer	performance is not an issue here...	07:56
=== Guest96115 is now known as FMan
ikonia	Slartibart: I'm not sure the relevence of that paste (I can see it now)	07:57
ikonia	Slartibart: and I've no idea why you are using both "service" and "systemctl"	07:57
slazer	at least Windows 7 with .NET 4.5 is required, Windows 10 is supported as well	07:57
javid_	llo	08:06
javid_	hello dero	08:06
Triffid_Hunter	cihhan: no idea, sorry	08:06
deronnax	hello	08:07
gebruiker	what kernel is best nowadays for desktop ? Pf kernel... liquorix ?	08:07
ikonia	standard	08:07
Triffid_Hunter	slazer: what are you gonna virtualize if not windows OS? ReactOS perhaps?	08:07
ikonia	the default that ships with ubuntu gebruiker	08:07
javid_	ip address	08:07
slazer	Triffid_Hunter, I don't understand the question, please rephrase.	08:07
cihhan	Triffid_Hunter: Unfortunately nothing seems to be working fine... I have updated the timezone just in case, but still date is not setting and ntpdate is not working either...	08:08
Triffid_Hunter	cihhan: you are using sudo, right?	08:08
cihhan	as root	08:08
slazer	Triffid_Hunter, ReactOS is a full-blown linux distro to enable Windows apps virtualization, right? The thing is, I have Ubuntu now..	08:09
Triffid_Hunter	slazer: ReactOS is an open source implementation of the windows kernel and some of the libraries	08:10
slazer	Triffid_Hunter, jesus christ"	08:10
Triffid_Hunter	slazer: for windows apps to work, something must provide the windows libraries.. you're saying wine doesn't work, so your other option is to run it under windows	08:11
ducasse	slazer: you can either use wine or full virtualization of windows.	08:11
slazer	Triffid_Hunter, does it work? have you tried?	08:11
slazer	Triffid_Hunter, I have never expected Windows kernel to be implemented in opensource..kind of shocked me, sry	08:12
Triffid_Hunter	slazer: never tried ReactOS, don't have much interest in windows stuff	08:12
Triffid_Hunter	slazer:heh you underestimate the bloody-minded determination of some open source hackers	08:12
slazer	Triffid_Hunter, me neither, Windows sucks, but there is some stuff for my mom that is kinda platform-proprietary..	08:13
slazer	hmm, so afayk there is no middle-choice between "full VMWare-like virtualization of Windows" and "dedicated Linux distribution"? something like containers? somthing like in Qubes OS?	08:15
slazer	(to run on existing linux distro, such as Ubuntu)	08:16
ducasse	slazer: no.	08:16
Triffid_Hunter	slazer: it's called wine	08:16
slazer	apart from Wine, obviously :D	08:17
ikonia	wine is not a solution	08:17
ikonia	win 19	08:17
=== johnl is now known as Guest11760
slazer	Qubes does full hardware virtualization of Windows OS, I am surprised there is no such thing in the linux ecosystem..	08:18
ikonia	slazer: there are many virtualzation options for linux	08:18
slazer	ikonia, you probably mean VMWare-like, right?	08:19
ikonia	no	08:19
=== ludi is now known as Guest23138
ikonia	slazer: what's youre actual question	08:19
ikonia	(or the problem you are trying to solve)	08:19
slazer	ikonia, a program fails to run on Wine, what are the possibilities (using the same OS, that is Ubuntu 16.04)	08:20
ikonia	none - because it's meant for a different operating system	08:20
ikonia	slazer: what is the application you are trying to run	08:20
slazer	ikonia, that was helpful	08:20
ikonia	slazer: it's realitic,	08:20
slazer	ikonia, its a proprietary application..no chance to be ported in any way ever	08:20
javid_	yeah	08:21
ikonia	slazer: so, run it in windows then	08:21
slazer	ikonia, and..its crucial for my moms business, of course	08:21
slazer	ikonia, never"	08:21
ikonia	never what ?	08:21
ikonia	slazer: then run it on windows	08:21
slazer	ikonia, never abuse my nb with windows ever	08:21
slazer	Im free	08:22
jokke	i tried setting the timezone on a ubuntu server (16.04) to utc, but it still shows localtime as CEST	08:22
jokke	any idea why?	08:22
slazer	so..Windows is not a choice, anything else?	08:22
ikonia	slazer: then you're being a fool	08:22
=== KindOne_ is now known as KindOne
ikonia	slazer: you're taking a petty "windows is evil" stance, while building a business around a propritary windows only app	08:22
ikonia	slazer: grow up - run a windows instance and run your business	08:23
slazer	ikonia, if we gonna think this way, the Windows reign will never end	08:23
ikonia	slazer: it already has	08:23
slazer	ikonia, Windows is not a choice!	08:23
ikonia	slazer then pay for someone to write a new application	08:24
ikonia	there is your other choice	08:24
slazer	ikonia, no its not..windows now runs Linux applications	08:24
ikonia	slazer: that is a totally different situation	08:24
slazer	ikonia, linux its taking its toes finally..	08:24
ikonia	taking it's toes ??	08:24
ikonia	what are you talking about	08:24
slazer	ikonia, games are being ported..	08:24
ikonia	no they are not	08:24
jokke	slazer: reactos	08:24
slazer	ikonia, steam is available for linux now	08:24
ikonia	right - and it runs a lot of things through wine	08:24
ikonia	and it's not really "working"	08:25
jokke	steam is totally working	08:25
slazer	ikonia, there are some native games	08:25
jokke	*many native games	08:25
ikonia	slazer: look, you've built a business around a windows only app, your options as an adult "run it in a windows based OS, eg: physical/VM" - swap that app out to something that works on linux	08:25
jokke	anyway	08:25
jokke	slazer: http://reactos.org/	08:25
slazer	ikonia, I don't have money for the licence	08:25
slazer	ikonia, eol	08:26
slazer	jokke, yep, Ill probably try that	08:26
=== Fuchs is now known as stumble
nwe	hello, does ubuntu has package for kafka ? or must I build them by myself?	08:26
ikonia	slazer: you won't have a business if you don't get the money	08:26
ikonia	as you've built a business around a windows only app	08:26
DNS	ehm sorry for repeat but i would like to know if i can fix that: i installed for a friend the 2nd time xenial next to windows8.1 on a sony vaio.. but everytime windows boots the mbr is gone... any ideas how to fix that?	08:26
ikonia	either way, this is way outside the scope of #ubuntu now	08:26
jokke	i actually had a #ubuntu question!	08:27
jokke	:)	08:27
slazer	ikonia, I was looking for Ubuntu solution..you advised to use Windows..	08:27
DNS	not sure if that is uefi or winblows issue	08:27
jokke	slazer: i have no experience whatsoever with that os though. It just seems to be exactly what you're looking for. I don't even know if it's at all usable.	08:27
slazer	jokke, okay, Ill give it a go and see how that goes..maybe write about that on my blog afterwards	08:28
slazer	thanks anyway for all suggestions	08:28
jokke	do that :)	08:28
javid_	nihao	08:32
=== popey_ is now known as popey
Imperator	ex-chat	08:39
QuestionBoy95	ni hao ma	08:40
QuestionBoy95	how to get rid of gaming addiction and make it a programming addiction	08:41
QuestionBoy95	:l	08:41
nagyf	start programming games ;)	08:42
=== valeech_ is now known as valeech
* l9 yawns		08:46
QuestionBoy95	nagyf: any book recommendations in java/c/c++ ?	08:48
l9	what other diagram programs are worth checking out?	08:48
l9	QuestionBoy95: depends on what you want todo	08:48
QuestionBoy95	l9: game programming with SDL in c for example	08:48
QuestionBoy95	or whatever you suggest	08:48
=== te_lanus is now known as telanus1
nagyf	QuestionBoy95: Nothing, sorry, I'm not a game programmer myself	08:52
=== telanus1 is now known as te_lanus
l9	http://gamedev.stackexchange.com/questions/3637/what-is-a-good-book-to-start-programming-a-2d-c-game	08:53
nagyf	just a quick google: http://stackoverflow.com/questions/388242/the-definitive-c-book-guide-and-list	08:54
nagyf	seems like a pretty good list. Not game programming though, just general c++ programming books	08:54
Imperator	I suggest you look at Brackeys on youtube he is using Unity with C# also try the subreddit /r/gamedev	08:55
te_lanus	see lutris got an update :D https://lutris.net/	09:05
VinceVon	good morning	09:13
VinceVon	quick question regarding cifs	09:13
VinceVon	I can mount my drives by doing sudo mount -a	09:13
=== beetee2 is now known as beetee
VinceVon	and the fstab file works fine, mounts all drives existing on the network	09:13
QuestionBoy95	alright thanks nagyf	09:13
VinceVon	the thing is, I managed to (once) make them mount upon clicking on the directory	09:14
adrijan	hello	09:14
VinceVon	instead of terminal and mount command	09:14
adrijan	anyone tried to set up a local repository on a offline machine	09:14
adrijan	that was working? :)	09:14
VinceVon	when I click on the dir now, it just says only root can mount	09:15
QuestionBoy95	thanks l9 there was a nice link: http://www.lazyfoo.net/SDL_tutorials/index.php	09:16
VinceVon	well, nevermind, found the user/users option for cifs	09:17
VinceVon	it's working	09:17
FreeSailor	hi	09:24
=== Clarissa is now known as Aithne
TheNH813	Why aren't SVG icons working? They show up as a grey square with a question mark. How do I get my application icon to work? Render it to .png first?	09:25
TheNH813	Dosen't Unity support SVG Icons?	09:28
=== mg is now known as Guest27477
=== Aithne is now known as Clarissa
=== Guest27477 is now known as mg-
Gue-clone	of course not	09:42
`mist	heya fellas, using xrandr -r 144 sets all the monitors refreshrate to 144. using xrandr --output DisplayPort-0 -r 144 does nothing	09:42
=== gh0st is now known as Guest69255
TheNH813	mist: That sounds like a bug or driver issue.	09:49
TheNH813	Or maybe it dosen't directly support controlling DisplayPort graphics.	09:50
`mist	=/	09:51
`mist	could it be because it is all one big screen?	09:51
TheNH813	What do you mean by one big screen?	09:52
`mist	http://pastebin.com/WHAFZ1w4	09:52
`mist	at the top it says "Screen 0"	09:52
TheNH813	That's a possibility. I believe they may all need to be at the same refresh rate for Xinerama and similar extended desktop modes.	09:54
`mist	yeah i want them to be 3 separate screens and not one massive one	09:54
TheNH813	Can you set the refresh rate of the DVI screens individually?	09:54
`mist	haven't tried... one sec	09:55
TheNH813	Any results?	09:57
`mist	uhm, just setting the refreshrate doesn't work	09:58
`mist	trying to figure out if i need to set resolution aswell	09:58
TheNH813	Now, by having the displays seperate, do you mean as in different applications on each or do you mean a different user can login on each?	09:59
TheNH813	(I'm looking some stuff up, just getting a hint of info)	09:59
`mist	oops =D	10:01
`mist	i managed to do something and everything went black =)	10:02
TheNH813	That's the joy of trying to "correct" graphing settings. :P	10:02
TheNH813	Have you tried using the Displays utility?	10:03
TheNH813	Maybe you could check what it sets the parameters to and then customize the command.	10:04
`mist	there is no way of setting the refresh rate in there	10:04
`mist	hmm i wonder if i just managed to set the refreshrate	10:05
`mist	ah there we go	10:05
TheNH813	You got it working?	10:06
`mist	yeah you need to set the mode with the rate	10:06
TheNH813	Ah, that makes sense.	10:06
`mist	"xrandr --verbose --output DisplayPort-2 --mode 1920x1080 --rate 144" that did it	10:06
TheNH813	Sometimes setting things up is a bit tricky. Once you figure it out make sure to save that command in a text document.	10:07
TheNH813	Just incase of forgetfulness.	10:07
TheNH813	=)	10:07
`mist	yeah heh ^	10:07
`mist	^^	10:07
TheNH813	Well, glad to hear you got it running at the right rate. I'l switch tabs and lurk until I get a notification. :D	10:08
`mist	thanks for the help TheNH813 =)	10:08
TheNH813	You're welcome.	10:08
=== nerd is now known as Guest70768
=== te_lanus is now known as telanus
freakyyy	hi all. is there a way i can remove this "click to open" thing where taskbar icons are placed? and instead put the taskbar icons to the upper right?	10:43
FBI	hack the source	10:43
omnist	hey	10:54
=== jatt is now known as Guest84988
omnist	Hi jatt	10:55
=== FBI is now known as Mion
omnist	Good evening	10:56
=== jat-clone is now known as Guest11322
yancho	hi. isn't the /etc/hosts file to be read before the nameservers?	11:10
bekks	Depends on your system configuration.	11:11
yancho	i did 127.0.1.1 seminary.local	11:12
yancho	and 127.0.0.1 localhost	11:13
brunch875	Is there a reason why the folders in home start in uppercase?	11:13
yancho	but nslookup 127.0.0.1 is going to the router and is giving me the translation to the localhost of the router	11:13
Mion	brunch875: only a few do	11:14
Mion	brunch875: and they are a part of the freedesktop spec/recomendation	11:15
canobi	Hey all. Anybody here left with a non-working wired connection after today's updates? Went digging through the interweb, so far disabled IPv6 and set iommu=soft on grub, but no joy.	11:21
gtrt05	can anybody help me out when i try to shutdown it just hangs and does get past thee loading	11:21
canobi	gtrt05: <ctrl><alt><f1>, then login with your username/password, type in "poweroff" and that's it.	11:26
Vorap	canobi: don't you need sudo privileges to execute that? Or maybe that's my memory failing me	11:29
Vorap	Poweroff that is	11:29
canobi	Yes you do, sorry. So, needs to type in "sudo poweroff"	11:31
Vorap	No worries	11:34
C0rentin	Hi	11:35
Vorap	Heyo C0rentin	11:36
vantul	Hi, I use a VPN to connect to my workplace, but only need one terminal to use the VPN. Is it possible to only have the terminal use the VPN, and use my normal internet connection for all other programs, e.g. Firefox? I use the Cisco VPN client but a solution for any client would be appreciated as I might be able to adapt it or use that client instead	11:37
Dukas	sup	11:40
Vorap	Hey Dukas	11:40
rexwin_	I installed jitsi and video and chat works great. but when I click on share screen it says Permission Denied Failed to install desktop sharing extension	11:40
Dukas	is this program really useful?	11:41
Vorap	Dukas: what program? :)	11:41
Dukas	hexchat	11:41
cfhowlett	no	11:41
Dukas	whats the point of it anyway?	11:42
Vorap	I would recommend konversation or quassel, they are my personal favourites	11:42
cfhowlett	Dukas, this is ubuntu support. irc is a chat app (obviously). if it wasn't useful, you would not be here.	11:42
Dukas	oh ok	11:43
cfhowlett	other ubuntu questions, Dukas ?	11:43
Vorap	Dukas, hex chat is an irc client used to connect to irc servers. There are multiple channels here, you can see them when you type /list	11:43
Fr_Dae	Dukas	11:46
Fr_Dae	?	11:46
barq	I get Hash Sum mismatch after updating 15.10 to 16.04 and running apt-get update. How can I fix this?	11:48
barq	si the mirror archive.ubuntu.com correct?	11:48
barq	is*	11:48
Schwarzbaer_	Hi. I'm on 14.04, and there doesn't seem to be a pip3. Where did that go?	11:50
=== scott is now known as Guest79331
Zimmer	Hi All	11:51
gtrt05	does anybody know what to do to stop my sutedown to stop hanging	11:51
gtrt05	shutdown*	11:51
ioria	!info python3-pip trusty \| Schwarzbaer_	11:55
ubottu	Schwarzbaer_: python3-pip (source: python-pip): alternative Python package installer - Python 3 version of the package. In component universe, is optional. Version 1.5.4-1ubuntu4 (trusty), package size 78 kB, installed size 437 kB	11:55
Schwarzbaer_	Thanks, ioria. apt-cache search didn't find that.	11:55
ioria	Schwarzbaer_ really, ? apt-cache policy python3-pip	11:56
Schwarzbaer_	ioria, well... apt-cache search pip3	11:56
ioria	Schwarzbaer_ really, not pip3, python3 ... pip	11:57
Schwarzbaer_	Well, the executable is pip3, so as not to clash with pip for Python 2.	11:57
ioria	Schwarzbaer_ i see	11:58
rizwanchowdhury	Hi Everybody	11:59
cfhowlett	greetings rizwanchowdhury	11:59
rizwanchowdhury	My laptop model is HP 14-r008tx. I got some problem with hardwares n ubuntu 16.04. I had tried 14.05 also that was worst	12:01
=== nerd is now known as Guest30993
Zimmer	<rizwanchowdhury> Did you tryied to follow the guide from HP site ?	12:04
ioria	!details \| rizwanchowdhury	12:04
ubottu	rizwanchowdhury: Please elaborate; your question or issue may not seem clear or detailed enough for people to help you. Please give more detailed information; for example, we might need errors, steps, relevant configuration files, Ubuntu version, and hardware information. Use a !pastebin to avoid flooding the channel.	12:04
rizwanchowdhury	<zimmer> yes I tried	12:05
rizwanchowdhury	@ubotta	12:05
Zimmer	<rizwanchowdhury> Please provide us more details..	12:06
barq	I update my sources list but still get hash sum mismatch during apt-get update after migrating to 16.04.	12:06
cfhowlett	barq, try using a differnt mirror	12:07
Deepfriedice	Is it just me, or is the SSL version of the Ubuntu site down?	12:07
ioria	rizwanchowdhury is that you ? http://askubuntu.com/questions/810103/many-problems-with-ubuntu-16-04-1-on-hp-14-r008tx	12:07
cfhowlett	Deepfriedice, test it: http://downforeveryoneorjustme.com/	12:08
Deepfriedice	cfhowlett: That doesn't seem to differentiate between http and https.	12:09
ioria	Zimmer, maybe you'll have more chances on the public channel ... :þ	12:10
=== Clarissa is now known as OdaMae
cfhowlett	barq, fwiw: I'm now getting all kinds of errors whereas earlier today, things were perfect	12:11
rizwanchowdhury	<Zimmer> Laptop model: HP 14-r008tx, Ubuntu 16.04.1. Installed perfectly. But when I close lid it doesnt come back I have to force stop. Wi-fi not showing any signal, bluetooth saying adapter not found. Asked on ask.ubuntu but none had given any solution. Tried many solution on internet but couldnt find any suit able one... laptop contains Ralink RT3290 bluetooth and wifi combo	12:14
=== OdaMae is now known as opie
=== rizwanchowdhury is now known as rizwanBD
rizwanBD	<ioria> yes	12:16
=== freddd is now known as Guest63624
Guest63624	hey, the unity setting “Turn screen off when inactive” only makes my screen go black and doesn't actually turn off/standby my monitor	12:18
Guest63624	what do I need to do to make it turn off the monitor for real?	12:18
ioria	rizwanBD, so suspend and wifi issues ... are you fully updated ? sudo apt update and sudo apt full-upgrade	12:18
root__	hello guys	12:20
rizwanBD	<ioria> I tried that but not working	12:20
=== root__ is now known as hazar
hazar	:)	12:20
ioria	rizwanBD, if wifi out, you need a cable ...	12:20
hazar	do anyone know a good website to learn ubuntu commands	12:21
cfhowlett	!fcm \| hazar	12:21
ubottu	hazar: fcm is THE Ubuntu Community Magazine - find it at www.fullcirclemagazine.org, or #fullcirclemagazine	12:21
rizwanBD	ioria, I am using now with cable	12:21
cfhowlett	!manual \| hazar	12:21
ubottu	hazar: The Ubuntu Manual will help you become familiar with everyday tasks such as surfing the web, listening to music and scanning documents. With an emphasis on easy to follow instructions, it is suitable for all levels of experience. http://ubuntu-manual.org/	12:21
ioria	rizwanBD, ok, so apt full-upgrade gives you 0 ?	12:22
rizwanBD	ioria. yes	12:22
=== sdx32 is now known as sdx23
barq	cfhowlett: which mirror?	12:22
cfhowlett	barq, main ubuntu mirror might be interesting	12:23
ioria	rizwanBD, ok, can you paste sudo lshw -c Network	12:23
barq	a country specific one?	12:23
rizwanBD	<ioria> rizwanchowdhury@rizwan-HP-Notebook-PC:~$ sudo lshw -c Network	12:26
rizwanBD	*-network	12:26
rizwanBD	description: Ethernet interface	12:26
rizwanBD	product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller	12:26
rizwanBD	vendor: Realtek Semiconductor Co., Ltd.	12:26
rizwanBD	physical id: 0	12:26
cfhowlett	!paste \| rizwanBD	12:26
ubottu	rizwanBD: For posting multi-line texts into the channel, please use http://paste.ubuntu.com \| To post !screenshots use http://imgur.com/ !pastebinit to paste directly from command line \| Make sure you give us the URL for your paste - see also the channel topic.	12:26
ioria	rizwanBD, not here, paste.ubuntu.com or install pastebinit	12:26
barq	cfhowlett: Could you give an example?	12:27
rizwanBD	physical id: 3	12:27
rizwanBD	logical name: enp0s20u1	12:27
rizwanBD	serial: f2:e8:1b:95:c5:d4	12:27
rizwanBD	capabilities: ethernet physical	12:27
rizwanBD	configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.107 link=yes multicast=yes	12:27
cfhowlett	rizwanBD, dude. STOP!	12:27
sslove	hey y'all, anybody good at packaging here?	12:27
cfhowlett	!packaging \| sslove	12:28
ubottu	sslove: The packaging guide is at http://packaging.ubuntu.com/html/ - See https://wiki.ubuntu.com/UbuntuDevelopment/NewPackages for information on getting a package integrated into Ubuntu - Other developer resources are at https://wiki.ubuntu.com/UbuntuDevelopment - See also !backports and !sponsoring	12:28
cfhowlett	barq, dealer's choice: https://launchpad.net/ubuntu/+archivemirrors	12:28
Zimmer	<rizwanchowdhury> Follow this link, it;s same problem as you have but with dell. anyway it doesn't matter and this solution should work..	12:29
Zimmer	http://askubuntu.com/questions/763085/with-ubuntu-16-04-laptop-doesnt-suspend-when-lid-is-closed	12:29
Zimmer	<rizwanchowdhury> http://askubuntu.com/questions/763085/with-ubuntu-16-04-laptop-doesnt-suspend-when-lid-is-closed	12:29
rizwanBD	ioria, http://paste.ubuntu.com/23018058/	12:29
Zimmer	<rizwanchowdhury> Let us Know if problem fixed...	12:29
Zimmer	thx	12:29
ioria	rizwanBD, the driver is loaded ... and you cannot connect or scan the network ?	12:31
sslove	douane is such a cool app, sort of like an app i used on mac os x years ago, but nothing like it in linuxland besides douane but it's not in the repos and there is no binary available. building it myself requires so much installation of dependencies, like hundreds of mb, and then my builds always fail. i wonder why this awesome app isn't in debian OR ubuntu repos	12:32
rizwanBD	ioria, there are no wifi networs showing in network panel	12:32
rizwanBD	<Zimmer> didnt worked	12:33
ioria	rizwanBD, can you paste ip a	12:33
barq	cfhowlett: It doesn't work with a different mirror either.	12:35
rizwanBD	ioria, http://paste.ubuntu.com/23018489/	12:35
cfhowlett	barq, then it's a system problem. wait. these typically self-correct is fairly short order	12:35
cesurasean	hey guys, http://pastebin.com/fFK9T9UX, how do i fix this?	12:35
barq	OK, odd it always fails on the day I do-release-upgrade.	12:36
ioria	rizwanBD, do you have two ethernet cards ?	12:36
cesurasean	libethereum:amd64 1.2.9-SNAPSHOT--20160628-6a05dd7~trusty-0ubuntu1, what is this exactly?	12:36
cfhowlett	cesurasean, apt-cache policy solc will tell you	12:37
cfhowlett	and snapshot would seem to be a snappy type thing	12:37
rizwanBD	ioria, I dont know All the harwares are as same as I bought. I am now using internet via usb tethering with my phone	12:37
cesurasean	its an ethereum bug	12:38
popey	cfhowlett: not a snappy thing	12:38
root__	hello	12:38
root__	irssi	12:38
ioria	rizwanBD, ah, ok ...	12:38
cfhowlett	popey, ? OK, officially over my head then. sorry for misinformation cesurasean	12:39
popey	cfhowlett: it just means that version is a snapshot of what the code looked like in the upstream git/svn repo	12:40
XHFHX	Hi there. Can someone help me with a cron job? I really tried out a lot now but I still can't get it to work and I don't get the logging stuff from cron at all: http://paste.ubuntu.com/23018771/	12:40
ioria	rizwanBD, and, as far as you know, your eth0 is working ? have you tested it	12:40
popey	cesurasean: what's the problem?	12:40
XHFHX	the log file gets touched but its empty	12:41
cesurasean	cpp-ethereum is broken	12:41
cesurasean	solc wont install	12:41
popey	cesurasean: how are you trying to install it?	12:41
cesurasean	it broke on its own bro	12:41
cesurasean	i think geth was updated	12:41
cesurasean	its already installed	12:42
cesurasean	but json errors when trying to mine	12:42
popey	where did solc come from?	12:42
cesurasean	cpp-ethereum	12:42
rizwanBD	ioria, Yes I have tested it with broadband connection and it worked	12:42
cesurasean	my system is now a fuber miner because of upgrade to geth on pool most likely	12:42
ioria	rizwanBD, ok, are you using static or dhcp configuration ?	12:43
cesurasean	and so cpp-ethereum stop working because of solc updates	12:43
rizwanBD	ioria, dont know	12:43
popey	maybe need to file a bug upstream cesurasean https://github.com/ethereum/cpp-ethereum/issues	12:43
cesurasean	sweet just filed the bug	12:44
cesurasean	thanks	12:44
popey	np	12:44
cesurasean	they should slap whoever broke it	12:44
ioria	rizwanBD, you haven't set up ip,netmask and gateway etc. in Network Manager gui , i mean ?	12:44
=== rizwanchowdhury is now known as rizwanBD
Zimmer	rizwanBD run this command and paste output *( ls /etc/pm/sleep.d/ )	12:48
rizwanBD	10_grub-common 10_unattended-upgrades-hibernate novatel_3g_suspend	12:49
rizwanBD	Zimmer 10_grub-common 10_unattended-upgrades-hibernate novatel_3g_suspend	12:49
Zimmer	now show me what's inside cat /etc/pm/sleep.d/10_unattended-upgrades-hibernate	12:50
rizwanBD	Zimmer, how to open??	12:51
denilson	hey	12:54
denilson	how goes	12:55
ravi__	Hi can any help me on the below? I am using 16.04 LTS on my lenevo laptop with radeon graphics card which is Automatically locks(screen loc) down. i dont know how to fix it.	12:55
ravi__	rally appreciate your help on this	12:55
ctjctj	Hello. How do I change the VNC/RDP password from the command line?	12:56
bittin	updating Debian stuff atm :)	12:57
ioria	rizwanBD, try to configure again your wifi (wlo1). you can use Automatic (dhcp) or manual (static) , right-click on Network icon and Edit Connection	12:57
rizwanBD	<Zimmer> http://paste.ubuntu.com/23020094/	13:00
ravi__	I am using 16.04 LTS on my lenevo laptop with radeon graphics card which is Automatically locks(screen loc) down for every 10 sec terminating all applications. i dont know how to fix it.	13:00
rizwanBD	ioria, it is configured as automatic	13:00
=== opie is now known as OdaMaeBrown
ioria	rizwanBD, ok, but it's not getting an ip .... you can check running iwconfig	13:01
ravi__	I am using 16.04 LTS on my lenevo laptop with radeon graphics card which is Automatically locks(screen loc) down for every 10 sec terminating all applications. i dont know how to fix it.	13:01
cfhowlett	ravi patience	13:01
ioria	rizwanBD, try a manual config, if it fails to get an ip, it's a driver issue http://askubuntu.com/questions/792209/ralink-rt3290-wifi-card-not-working-on-ubuntu-16-04	13:02
ravi__	ok cfhowlett: :-)	13:02
cfhowlett	ravi__, about every 15 minutes you should refresh your query	13:03
Zimmer	ravi__> Check power options in system, first .System Settings > Power	13:03
ravi__	zimmer: i have checked it every this is normal. i Mean i have checked the box that allows to suspend only when my lid is closed. but strangely with our closing my lid automatically my screen locks down(terminating all active applications).even i have disabled automatic screen lock function too inspite of that still the issue is apprearing..	13:06
BluesKaj	Howdy all	13:08
ctjctj	self answer: vino-password	13:08
=== stumble is now known as telefoxsimile
=== telefoxsimile is now known as Fuchs
rizwanBD	ioria, not working :(	13:12
=== OdaMaeBrown is now known as Clarissa
Zimmer	<rizwanBD> Typical scenario is "use a laptop docked with lid closed, only the external screen is active, suspend, take the laptop, open it somewhere"... which leads to "no screen active".	13:17
Zimmer	To debug this problem, check if gnome-settings-daemons is getting a signal that the display configuration has changed, by running xtrace against it, and look for a RRScreenChangeNotify event when resuming the machine. If that signal is being sent, then it indicates a possible bug in g-s-d. Otherwise, it suggests a bug in either X or (more likely) the kernel which is not causing the signal to be emitted to begin with.	13:17
loladiro	I’m looking for the debug symbols for `dash`. I tried to look for `dash-dbg` or `dash-dbgsym` package. Any pointers?	13:18
=== ss_ is now known as Guest80714
Zimmer	Bye community, <rizwanBD> hope you can solve this problem :( ..	13:19
rizwanBD	zimmer, how to solve the poblem	13:19
DarkPsydeLord	Zimmer? Hanz Zimmer? its an honor sir...	13:20
ravi__	I am using 16.04 LTS on my lenevo laptop with radeon graphics card which is Automatically locks(screen loc) down for every 10 sec terminating all applications. i dont know how to fix it.	13:21
ravi__	In power settings i have checked the box that allows to suspend only when my lid is closed. but strangely with our closing my lid automatically my screen locks down(terminating all active applications).even i have disabled automatic screen lock function too inspite of that still the issue is apprearing..	13:21
ravi__	appreciate your help on this my genious friends	13:21
OerHeks	every 10 sec..	13:22
=== Guest80714 is now known as sslove
=== albuquerq is now known as albu
ilhami	hello.	13:47
leo-ren	:)	13:54
=== Clarissa is now known as OdaMaeBrown
=== Zhao is now known as Guest95753
=== Guest95753 is now known as Xhaozer
maxagaz	hi	14:07
maxagaz	I've just install ubuntu on an usb stick with unetbootin but it doesn't boot on my desktop computer while usb is set as priority in the bios	14:07
maxagaz	can someone help me about this ?	14:07
kisb	go to boot options and boot from USB	14:10
kev_	I downloaded 16.04, burned to DVD and also saved on USB, it only shows up as ISO file ready to burn to disc, will not boot to install ubuntu, either from dvd or usb. Do I need to download another file ?	14:11
paschalis	stuck on purple screen, after I accidentally rebooted the machine from terminal, using reboot. boot-repair log gives me this: http://paste2.org/V491vjKO	14:11
kev_	guess I am stuck with windows .............	14:13
paschalis	any ideas? thank you!	14:14
cfhowlett	paschalis, did it ever work?	14:15
paschalis	yes , of course!	14:15
BluesKaj	you need toi make a boot image , unetbootin , diskcreator, dd are a few apps that will work , usually , kev_ in windows use rufus	14:16
paschalis	and when live-booting, I can even see the files of the hd, which means no hardware failure	14:16
cfhowlett	paschalis, recent upgrades? especially kernel?	14:17
paschalis	that's they weird thing.. no actually.	14:17
paschalis	cfhowlett: but, I did a random reboot though.. for example instead of executing my script, reboot.sh, I executed reboot.	14:18
kev_	I suppose it would make too much sense to be able to just download a copy of ubuntu that loads and works .........	14:18
paschalis	then the machine rebooted, it took reaaaally long time at the logo screen (it is after the purple), and when it loaded I shut it down from the menu before booting.	14:19
paschalis	then, when I tried to boot, it stuck on the purple screen. I tried 2-3 times to "boot-repair"	14:19
mustmodify	Hello. I followed the instructions to build libdmtx and dmtx-utils. Now I'm getting "dmtxwrite: error while loading shared libraries: libdmtx.so.0: cannot open shared object file: No such file or directory"	14:19
cfhowlett	paschalis, that should not matter	14:19
mustmodify	can someone provide guidance about how I should troubleshoot?	14:19
BluesKaj	kev_, do you have adcrom drive and and a blanh dvd, that will work	14:20
cfhowlett	paschalis, not sure why you decided boot repair was the issue , but stop that	14:20
paschalis	okay.	14:20
paschalis	btw thanks for helping me out!	14:21
cfhowlett	paschalis, wild guess but safe enough to test: try booting the nomodeset options	14:21
cfhowlett	!nomodeset	14:21
ubottu	A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter	14:21
kev_	it's a toshiba satellite laptop, about 8 years old, has CD/DVD read/write	14:21
kev_	have blamk discs	14:21
paschalis	so replace on grub menu the gfx_something ?	14:21
BluesKaj	kev_, then burn the downloaded ubuntu iso file to the dvd	14:22
cfhowlett	paschalis, yes you would edit the grub launcher - carefully	14:22
kev_	I DID, it saved it on the DVD as ISO file, ready to burn to disc	14:22
paschalis	okay. I will. it takes some time to boot the dell precision T7600..	14:22
kev_	will not open/read the disc as anything else	14:23
kisb_	kev_, burn not copy to	14:23
kisb_	use tools for burning	14:23
kev_	I did	14:23
kev_	so windows media player screwed me up on the burning part	14:23
kisb_	smh	14:24
BluesKaj	kev_, you must have copied the iso file to the disk, it's not the same as burrning the image , burning it makes the disk bootable as a live media disk	14:24
paschalis	in the meantime, there really lot of files that I am working with. compiling android from sources, so lot of files, lot of outputs. could it be something like fragmentation? because the time that it booted (and I shut it down) it took really long time. it has passed the purple screen though, and went to the logo screen (the one with the dots)	14:24
cfhowlett	paschalis, you mentioned on older machine I think? how much ram??	14:25
ExecSlim	paschalis: on the screen with the dots, hit escape. It'll show some log output	14:25
kisb_	i think windows has inbuilt burning capabilities if i remember correct	14:25
rektide_	hi. I upgraded to Firefox 48, and now 1/2 the page's fonts dont render, my tab bar doesn't have tab names or has unicode boxes, and the addressbar is all unicode boxes. What happened? What might I try to fix this?	14:25
paschalis	32gb ram. lots of ram. cpu has 6 cores and 12 threads. and ubuntu was still very slow.	14:25
cfhowlett	paschalis, that's ... weird	14:26
kev_	yes, I used windows built in dvd burner feature	14:26
shantorn	hi, i have a laptop with 16.04 and would like ot know the corrent process to setup my optimus graphics hardware?	14:26
ExecSlim	!optimus	14:26
ubottu	Ubuntu uses nvidia-prime to support optimus videocards.	14:26
kisb_	kev_, just use brasero or something like that	14:27
BluesKaj	kev_, try imgburn, it's been around for a while and very relaible	14:27
kisb_	what do win people use	14:27
BluesKaj	kisb_, he's on windows	14:27
kisb_	nero maybe	14:27
paschalis	cfhowlett: I know! just out nomodeset before quite splash,and hit F10. it went immediately on purple screen.	14:27
shantorn	ExecSlim, thank you	14:28
shantorn	do i need to install any nvidia drivers to go aong with that app	14:29
rektide_	my 'pt' fonts are rendering as all boxes, any suggestions?	14:29
=== kisb_ is now known as kisb
kev_	great, went t download imageburn and AVG wants to shut it down due to a threat	14:29
Vorap	BluesKaj, kisb, imgburn Is something I would recommend	14:30
ananke	wonder if anybody has run into a similar issue, so far can't find anything indicating a known bug in how preseed works. when i pass 'netcfg/choose_interface=eno1' via the APPEND line to the kernel, suddenly the installer fails to detect local disks	14:30
paschalis	I promised to my self, if I get to boot into ubuntu again, I'll get a reliable ssd!! any ideas on what to do shantorn ?	14:30
paschalis	wrong tag. I meant cfhowlett .	14:31
cfhowlett	paschalis, too mysterious for me to do more than guess at - not helpful in your case. direct your query to the channel at large. best of luck.	14:32
BluesKaj	kev_, the default windows burner app should work ...where did you download the ubuntu iso from ?	14:32
paschalis	also the grub menu, has some aaditional EFI.* entries..	14:33
maxagaz	kisb, it doesn't work with my biostar motherboard	14:35
mustmodify	Hello. I followed the instructions to build libdmtx and dmtx-utils. Now I'm getting "dmtxwrite: error while loading shared libraries: libdmtx.so.0: cannot open shared object file: No such file or directory"	14:36
sk___	Hi guys, i have got a little problem with an expression, i have to ban with iptables the IP in access.log http://paste.debian.net/788285/now im using this hex failregex = ^<HOST>.* but is not doing his job, anyone can help?	14:36
rektide_	how do i find out what package a font is in? i'm trying to find the pt serif font	14:37
shantorn	ExecSlim, do i need to install pure nvidia drivers as well with that nvidia-prime package?	14:38
paschalis	after rebooting from terminal, ubuntu 16.04 stuck on purple screen. any ideas guys? thank you!	14:42
l9	paschalis: where in the boot ? and does safemode work ?	14:46
paschalis	at the blank purple screen.	14:47
l9	your bios is fried, need too update it	14:47
paschalis	l9: safemode? the grub menu?	14:47
l9	yes	14:47
paschalis	yes I can get to that menu!	14:48
paschalis	but then what?	14:48
l9	can you boot into it and get a shell?	14:48
rektide_	help help help. my 'pt' fonts are not rendering except as boxes. pt mono, pt sans. and it appears a number of programs rely on these fonts.	14:49
paschalis	which option from the menu should I choose?	14:49
l9	with networking in case your x server is out of bounds	14:49
paschalis	recovery mode gives me a shell, but itss quite limited.	14:49
mustmodify	So does that mean that it can't find libdmtx.so.0? Or that libdmtx.so.0 can't find something else?	14:49
mustmodify	"dmtxwrite: error while loading shared libraries: libdmtx.so.0: cannot open shared object file: No such file or directory"	14:50
OerHeks	!find libdmtx	14:51
ubottu	Found: libdmtx-dev, libdmtx-utils, libdmtx0a	14:51
paschalis	i am trying again w/ nomodeset. it's stuck (or either doing stuff on the background?!) on "loading initial ramdisk"	14:51
=== jx is now known as jxt
=== jxt is now known as jxtsai
l9	paschalis: what where you trying too do before you rebooted?	14:52
mustmodify	OerHeks: Hunh, thanks.	14:53
paschalis	so I accidentally rebooted while I was on the terminal. there were stuff going on, compilations on unrelated to the OS files, IDE's open, browser open, etc..	14:53
paschalis	so it wasn't a planned reboot. I just typed reboot in the terminal (instead of reboot.sh, which was my script)	14:54
paschalis	I also think that I changed 1-2 days ago some settings on the nvidia GUI app (and haven't rebooted yet)	14:54
l9	that change too the kernel is why you cant reboot	14:56
paschalis	l9: the ramdisk?	14:56
OerHeks	paschalis, hold shift@boot, go into recovery (alt F1 make RW), and login, perform: Sudo dpkg --configure -a ### run apt-get install -f, all should be fine now	14:57
OerHeks	but your work is gone, unless you save a copy automatic	14:58
paschalis	regarding the nvidia settings I've using the gui app the performance from "full quality" to "quality".. and some other stuff like that..	14:58
paschalis	OerHeks: my work? not all my files, just what I was doing back then?	14:59
=== precise is now known as precise\|snek
OerHeks	work as in what you have opened at that time	14:59
paschalis	okay	14:59
paschalis	OerHeks: I'll report in a while	15:00
paschalis	while booting recovery, I ve noticed "duplicate or bad block in use!"	15:01
paschalis	OerHeks: but how do I login while in recovery?	15:03
OerHeks	you will see	15:03
OerHeks	bad block, ouch..	15:03
OerHeks	then you want to fsck that partition	15:04
OerHeks	!fsck	15:04
ubottu	fsck is the FileSystem ChecKer, which runs automatically when you boot if you didn't shutdown cleanly. Type "man fsck" for information on running it manually. The command "sudo touch /forcefsck && sudo shutdown -r now" will force a reboot and a filesystem check; "sudo touch /fastboot" will skip a filesystem check at next reboot	15:04
paschalis	whens but I don't have full access to terminal to perform this.	15:04
paschalis	yes, I did not shutdown cleanly.	15:04
=== cigumo_ is now known as cigumo
MacroMan	jpegoptim doesn't do recursion which is annoying. Is there a bash script that will run a command recursively for me?	15:05
EriC^^	MacroMan: what command?	15:05
MacroMan	EriC^^, jpegoptim	15:06
EriC^^	MacroMan: i mean the whole command	15:06
MacroMan	EriC^^, jpegoptim *	15:07
ananke	MacroMan: find -type f -exec jpegoptim '{}' \;	15:07
ananke	MacroMan: find /dir -type f -exec jpegoptim '{}' \;	15:08
=== dominus_ is now known as rikut
MacroMan	ananke, Thanks. Will give that a try	15:08
EriC^^	MacroMan: what ananke said	15:08
ananke	wtf. i finally figured out what triggers this 'bug'. if i pass the kernel netcfg/choose_interface=eno1, then the installer fails to find storage. yet netcfg/choose_interface=auto works	15:08
paschalis	can I fsck using live usb?	15:08
EriC^^	paschalis: yeah	15:09
EriC^^	as long as it isn't mounted you're good	15:09
paschalis	also in grub I got "error reading sector.. from .."	15:10
paschalis	I 'll try to live boot then	15:10
gregf_	hello, this question may not be ubuntu specific	15:12
gregf_	but im trying to scp a file by bypassing an intermediate host	15:13
gregf_	ive managed to ssh , but scp does_not seem to work	15:13
gregf_	has anyone managed to get this sort of a thing working please? using ssh-config	15:13
paranoidabhi	I want to use kubuntu. say I buy a laptop which comes pre-installed with ubuntu. Should I just install kubuntu-desktop on it or remove ubuntu and install kubuntu	15:15
cfhowlett	paranoidabhi, you could do it like this: sudo apt-get remove --purge ubuntu-desktop && sudo apt-get install kubuntu-desktop	15:15
ikonia	paranoidabhi: just install kubuntu	15:15
ikonia	on supported hardware	15:16
ikonia	pre-installed is rarely a good build	15:16
paranoidabhi	ikonia, why do you say pre-installed is not a good build?	15:16
OerHeks	paranoidabhi, do a fresh install, so you won't be cluttered with gnome apps	15:16
MacroMan	Hmm. I'm now using this: find . -type f -path .jpg -exec jpegoptim '{}' \; but in some directories I get the error find: paths must precede expression: 1435_665_david.jpg and I don't know what it means	15:17
ericus	Hey guys. Any ideas on why videos played with VLC started to lag/be choppy for no reason? It used to work perfect	15:17
paranoidabhi	cfhowlett, will remove unity entirely?	15:17
ikonia	paranoidabhi: because it's normally a generic install with no real thought around it	15:17
paranoidabhi	Will I get kubuntu boot screen then cfhowlett ?	15:17
cfhowlett	paranoidabhi, unity and the entire ubuntu-desktop suite	15:17
paschalis	should I clone multiply-claimed blocks ?	15:17
cfhowlett	paranoidabhi, that command should set you up, but if not, configuring the plymouth boot set is quite easy	15:18
MacroMan	gregf_, I've tried that before, but never managed to get it working. Sorry I can be more help :(	15:18
paschalis	cfhowlett: l9 OerHeks Eric thanks for your help!	15:22
cfhowlett	best of paschalis	15:22
cfhowlett	luck	15:22
paschalis	it finally booted!	15:22
cfhowlett	what was the error?	15:22
paschalis	I rebooted while many things were going on, as I told you by accident.	15:23
paschalis	so I had to fsck the hard drive!	15:23
cfhowlett	ah!!!! yes, I will have to remember that. congrats on solving it!	15:23
OerHeks	:-)	15:24
paschalis	I wouldn't have managed without #ubuntu , really!	15:24
OerHeks	have fun, paschalis	15:24
paranoidabhi	ikonia, when you say "just install kubuntu". Before booting into kubuntu bootable usb to install, should I remove ubuntu before?	15:24
paschalis	I became one year older since the last time I booted ubuntu!	15:25
paschalis	thanks ! :)	15:25
Rapture	via command line is it possible to open a new terminal window to a specific size?	15:26
ioria	gnome-terminal --geometry	15:26
=== Dice-Man is now known as Guest72055
gregf_	MacroMan: you mean scp a file? ive googled enough, but nothing seems to work :\|	15:27
gregf_	MacroMan: i can ssh to the final host tho'	15:28
OerHeks	gregf_, what do you mean with "by bypassing an intermediate host" ??	15:28
ioria	Rapture, e.g. gnome-terminal --geometry=20x20	15:28
gregf_	OerHeks: sure. i am on my dev box. i need to reach an ec2 instance, but i have to go through a bastion host(gateway/intermediate)	15:29
Rapture	ioria: thanks	15:29
ioria	Rapture, yrwlc	15:30
gregf_	OerHeks: using ssh that is. ive managed to ssh, but i need to also scp a file. and this is not working	15:30
setuid	If something has a BD on a package, 'foo', does that also mean that it has a RD on foo?	15:30
gregf_	OerHeks: ProxyCommand ssh ec2-user@bastion nc %h %p 2> /dev/null #this works, but only for ssh	15:31
gregf_	OerHeks: ProxyCommand ssh ec2-user@bastion -W %h:%p # this as well	15:31
setuid	Looking at d/control, one package declares a BD on 'foo', and it's own code does 'import foo' (python code), but if I remove 'foo', the main package breaks. It -should- have a dependency declared against 'foo', right?	15:31
setuid	Or does a BD incorporate foo.py into the core package?	15:32
gregf_	OerHeks: ProxyCommand scp ec2-user@bastion nc %h %p /var/lib/jenkins/jobs/jms/workspace/target/all-to-swf-transformer-0.1.2.1-BETA.jar %h:/home/ubuntu/ # this does_not	15:32
gregf_	OerHeks: do you get what i mean?	15:32
ericus	Any ideas why file transfering from a Windows Server would be SUPER SLOW?	15:32
gregf_	tunneling essentially	15:32
ericus	20-30Kbps	15:32
setuid	ericus, routing? block size? samba config? locking?	15:33
setuid	QoS disabled for your IPv4 or IPv6 adapter on the Windows side?	15:33
setuid	It's ALWAYS on by default, so you'd have to have disabled it	15:33
ericus	setuid, mounted with Gigolo, regular shared folders from a win2k8 server	15:34
=== voider is now known as voidah
setuid	no idea what gigolo is	15:34
setuid	I use real protocols, smb, cifs, etc.	15:34
ericus	"Gigolo is a frontend to easily manage connections to remote filesystems using GIO/GVfs. It allows you to quickly connect/mount a remote filesystem and manage bookmarks of such."	15:34
setuid	Easy to diagnose: mount the drive directly with mount(1), using CIFS, and see if the throughput is what y ou expect	15:35
setuid	Right, so avoid that. Use the mount command.	15:35
ericus	I think I might have to fall back to cifs	15:35
setuid	If it's using fuse instead of CIFS, that might explain it	15:35
ericus	setuid, how would I mount a shared folder the best way?	15:36
setuid	mount -t smb 1.2.3.4:/that/folder /some/local/path	15:37
setuid	man 1 mount	15:37
mustmodify	When I do this ( https://gist.github.com/mustmodify/143adbfe32dc8befcfa2 ) neither /etc/bash.bashrc or /etc/bashrc/* are run (afaik.) Can someone help me understand why?	15:39
nvidiapls	any idea why nvidia-settings is not fetching settings from /etc/X11/xorg.conf ?	15:40
setuid	mustmodify, because you haven't told bash that it's an interactive login shell	15:40
nvidiapls	has the location for xorg.conf changed in 16.04 ?	15:41
setuid	nvidiapls, nope	15:41
mustmodify	setuid: I see.	15:41
setuid	say /etc/X11/xorg.conf	15:41
setuid	ack	15:41
setuid	/etc/X11/xorg.conf	15:41
mustmodify	setuid: I mean, not really. I actually really struggle with that.	15:41
mustmodify	So what will be run with non-interactive shells?	15:41
mustmodify	Like, bash, whatever, interactive, not-interactive?	15:41
ericus	setuid, mount: unknown filesystem type 'smb'	15:42
setuid	If you want it to parse ~/.bashrc, you need to make it a login shell	15:42
mustmodify	I ask because I've struggled with that issue in the past, also.	15:42
setuid	ericus, -t cifs?	15:42
setuid	or put your mods in /etc/profile	15:42
nvidiapls	setuid: do you know if nvidia drivers override the settings in xorg.conf somehow? saving to that file from the nvidia-settings doesnt seem to do the trick, it's reset after reboot	15:42
mustmodify	setuid: My goal is simply to know where I can set env variables, run setup, that will be in effect for any shell, interactive or not, bash or not.	15:43
setuid	nvidiapls, yes, check ~/.nvidiarc	15:43
ericus	setuid, mount.cifs: bad UNC (192.168.1.100:media)	15:43
setuid	er, or ~/.nvidia-settings	15:43
nvidiapls	setuid: god damnit nvidia...	15:43
nvidiapls	thanks	15:43
setuid	ericus, is it exported as 'media' on the Windows side?	15:43
setuid	mustmodify, that's /etc/profile	15:43
mustmodify	ok, thanks.	15:43
ericus	yes setuid, it's a shared folder	15:44
setuid	mustmodify, but remember, that's almost ALWAYS a bad idea	15:44
ericus	yes setuid, it's a shared folder	15:44
setuid	ericus, when you run: smbclient -L 192.168.1.100, what do you see?	15:44
setuid	You should see a list of all of the exported folders, including one called 'media'	15:45
setuid	assuming you have the permissions and naming correct	15:45
nvidiapls	setuid: looks like it's .nvidia-settings-rc even	15:45
nvidiapls	ftp://download.nvidia.com/XFree86/Linux-x86/1.0-6106/nvidia-settings-user-guide.txt	15:45
mustmodify	setuid: So /etc/profile isn't run either.	15:45
setuid	mustmodify, those are never "run", they're parsed	15:45
setuid	big difference	15:45
setuid	you SOURCE them into the environment, you don't run them	15:45
setuid	they're not shell scripts	15:45
mustmodify	I put `touch /tmp/etcprofile` at the top and tried `sudo start thing` and the file wasn't there.	15:46
mustmodify	fine	15:46
mustmodify	hm...	15:46
setuid	please don't use backticks, ever	15:46
mustmodify	can you help me understand the difference?	15:46
setuid	$(touch /tmp/etcprofile)	15:46
setuid	Add debug, sh -x /path/to/your/script	15:47
setuid	#bash might be more help here	15:47
ericus	setuid, it fails because it tries to login as my user, not the user on the win server	15:47
ericus	ericus@greentic:~$ smbclient -L 192.168.1.100	15:47
ericus	WARNING: The "syslog" option is deprecated	15:47
ericus	Enter ericus's password:	15:47
ericus	session setup failed: NT_STATUS_LOGON_FAILURE	15:47
setuid	ericus, so pass it the correct user	15:48
fes	do i need to compile my own 4.7 kernel to get schedutil governor and if so is there any parameter that has to be set before compiling?	15:49
setuid	fes, governor has been there for many kernel versions	15:49
OerHeks	!mainline	15:50
ubottu	The kernel team supply continuous mainline kernel builds which can be useful for tracking down issues or testing recent changes in the Linux kernel. More information is available at https://wiki.ubuntu.com/Kernel/MainlineBuilds	15:50
fes	OerHeks, the schedutil governor?	15:50
setuid	cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_governors	15:50
OerHeks	why do you need the 4.7 kernel??	15:51
OerHeks	'because it is new' is not valid	15:51
fes	that's where the new governor schedutil is supposed to be added	15:52
fes	OerHeks, calm down	15:52
mustmodify	setuid: so if sh -x /path/to/script works but sudo start xyz does not, any thoughts about why?	15:54
setuid	mustmodify, the sh -x should be run from the caller (the parent) not within your script, it's used to debug what the caller's environment looks like, prior to running your intended script within it	15:54
mustmodify	right	15:55
Ravness	question, is it required to update the kernal right away?	15:55
Ravness	I think i'm on 4.4 i think?	15:55
mustmodify	so if I run sh -x /my/script, it should be in a non-interactive shell, right?	15:55
fes	anyone that can answer my schedutil question?	15:55
ioria	fes, which is ?	15:57
ericus	setuid, I can now see a list of shared folders with smbclient -U USER -L IP	15:57
setuid	Ok, and is 'media' one of them?	15:57
ericus	Yes	15:57
ericus	How would I be able to mount it?	15:57
setuid	you need to pass the same user/pass/etc. to the mount command	15:58
fes	ioria, do i have to compile my own kernel 4.7 to have schedutil governor available?	15:58
setuid	then I'd test a 'dd' style write to the device, to test throughptu	15:58
setuid	*throughput	15:58
ioria	fes, guess not... it'a a new feature of 4.7	15:58
fes	i do not see it when I cat available_scaling_governors	15:59
ioria	fes, you need 4.7.... but your ubuntu box will be .... unstable ?	16:00
fes	i do have 4.7 mainline kernel offered by Ubuntu.	16:00
fes	i have also disabled intel_pstate so that the computer use cpufreq instead	16:01
Ravness	how do you update the kernal, sorry noob question	16:01
Ravness	i'm with 4.4 still	16:01
ioria	fes, let me check the date ...	16:01
teward	Ravness: unless you have an obsessive need for the latest code, you may wish to stick to the kernel that comes with the system	16:01
teward	Ravness: because it will receive security updates as they're made available to the repos	16:01
Ravness	i see, I thought it will help with the laptop power management	16:02
fes	Ravness, what does use a lot of power on your computer?	16:03
fes	graphics?	16:03
nvidiapls	im unable to make my resolution and refresh rate stick after reboot with nvidia drivers - the ~/.nvidia-settings-rc file does not include resolution settings and xorg.conf is ignored	16:04
nvidiapls	any ideas?	16:04
ioria	fes, "the current Ubuntu Linux Mainline PPA packages don't set the Kconfig option for building this new CPUFreq governor "	16:04
Ravness	Well i have a thinkpad t520, 7-cell. Heavy use (Netflix, Youtube, MPV) the power goes from 4-5 hrs to 2. And thats with TLP enabled	16:04
nvidiapls	looking at the xorg log i see "Setting mode "DVI-I-1: nvidia-auto-select @1920x1080" even though i've changed from auto to a specific resolution	16:05
nvidiapls	i have no idea where it gets it from	16:05
Ravness	Thats why i was hoping a kernal update might help with the power management	16:06
ioria	fes, you may need another pkg, other then Mainline	16:10
b0k	Hello everyone! Quick question for you.. As of last night, whenever I boot up my laptop (running ubuntu) the OS doesn't immediately boot up anymore.. It just says "PXE-Rom Failed" or whatever, and then mentions something about a patent. I have to restart the machine, press escape on first boot up, then go into boot options, boot from EFI file -> grub -> and then ubuntu will load.. I have to do this each time.	16:19
b0k	Does anyone know how to fix or correct this, so that ubuntu automatically loads on boot?	16:19
compdoc	b0k, sounds like the computer is trying to boot from the network card. there might be settings in the bios to disable the boot option rom on the nic, and the boot order. It might be set to boot from the nic instead of the drive	16:21
keymaker69	Hola!!	16:23
keymaker69	que nadie escribe nada???	16:23
nvidiapls	$ cat /var/log/Xorg.0.log \| grep "Setting mode" [ 7.993] (II) NVIDIA(0): Setting mode "1920x1080_120+0+0" [ 11.378] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"	16:29
nvidiapls	why is it being set twice???	16:29
riqj	hello everyone, from 16.04. on (or earlier) it seems that I need to restart the machine for a newly added keyring to appear among my keyrings. is there another way to enable it to show up without restarting=	16:35
riqj	?	16:35
riqj	earlier it was enough to restart the keyring program	16:35
riqj	maybe it takes shorter to restart :)	16:37
=== kimmy_ is now known as LordiZ
=== precise\|snek is now known as precise\|projecto
=== precise\|projecto is now known as precise\|snek
docmur	I have a ubuntu server which uses autossh to establish a connection to a remote server, for some reason the connection will get established for about 1 second and then drop, how I can diagnose exactly why the connection dropped? I think it's an edge route I don't have access to	17:01
anthony_	sup	17:09
MWM	hi I am working on a VM running 16.04 server and am having to wait a really long time for the "headers"	17:14
MWM	ping is fine so i know there is a connection. just takes forever to get the headers. horrendously long time	17:15
WrinkledCheese	Interesting:	17:15
WrinkledCheese	uname -v #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016	17:15
WrinkledCheese	lsb_release -a Description:Ubuntu 14.04.4 LTS	17:15
WrinkledCheese	Shouldn't they match?	17:15
=== aloril_ is now known as aloril
=== InfoTest1 is now known as InfoTest
voidah	WrinkledCheese, maybe you installed a new kernel but still booted on an older one?	17:18
Mouaad	hello, when i run vainfo i get the following error: libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed	17:20
Mouaad	any ideas please ?	17:20
Mouaad	Intel HD Graphics 520 (integrated with Intel Core i7-6500U )	17:21
ankitraj	why doesn't ubuntu has refresh option like window?	17:21
akik	ankitraj: windows is a different operating system than ubuntu	17:22
ankitraj	akik, yeah that's I know	17:22
akik	ankitraj: you can use btrfs snapshots to "refresh" your installation to an earlier snapshot	17:22
ankitraj	akik, in ubuntu?	17:23
akik	ankitraj: yes	17:23
whlai	man bitchx	17:24
MWM	sorry for the repeat, but I dont see my question on the screen... is /ect/apt/sources.list still valid for 16.04 ? Mine is empty	17:24
akik	MWM: yes it's valid	17:25
ankitraj	akik, I want to know why it is used ?	17:25
rawjarhead	If i have an pure ubuntu machine (no windows / dual ), how can i access the boot-from-usb stick ? I would like to completely reinstall the ubuntu OS	17:25
akik	ankitraj: when you have your installation in perfect shape, create a btrfs snapshot. then you can later go back to that snapshot if you mess up the installation	17:26
rawjarhead	I have the new iso file on a usb stick, and want to access it from the boot menu on an ubuntu machine	17:26
rawjarhead	Can this be done via the ubuntu GRUB menu	17:26
MonkeyDust	rawjarhead yes, you can put a .iso in a folder, so you can 'live' boot from the grub... moment	17:28
MWM	well thats odd. it wasnt showing a second ago, but I hit the command again and there is a sources.list...	17:29
ioria	rawjarhead, https://help.ubuntu.com/community/Grub2/ISOBoot	17:29
rawjarhead	MonkeyDust: the desired ISO is in a USB stick, assume that it cannot be obtained from the machine itself	17:29
MWM	still trying to diagnose why my apt-get is "waiting for headers" all damn day sigh	17:30
rawjarhead	MonkeyDust: the computer has no terminal access, or anything. Just th grub menu	17:30
rawjarhead	the problem is that the original ubuntu OS is corrupt, and needs to be replaced with a fresh 14.04, reformatting the entire drive.	17:32
rawjarhead	I have a 14.04 iso on a usb stick	17:32
rawjarhead	I believe the original windows os has been removed entirely	17:32
rawjarhead	So i need some way of re-installing the ubuntu OS	17:33
=== Jochen_wvdT is now known as Schlawiner
rawjarhead	https://help.ubuntu.com/community/UbuntuReinstallation	17:34
rawjarhead	How does one "Run the UbuntuInstaller"	17:35
MonkeyDust	rawjarhead do you have a backup of your personal files?	17:35
rawjarhead	I don't need a backup	17:35
rawjarhead	Everything is to be removed	17:35
MonkeyDust	rawjarhead then simply boot from the live usb	17:36
rawjarhead	MonkeyDust: I have the iso on my USB, yes. I plug it into the computer, then i try to restart the computer -- the grub menu seems to behidden, it just goes straight to the dashboard	17:36
rawjarhead	"boot from the live usb" ? what are the steps after turning the computer on? Do I need to hold shift or f12 or something?	17:37
MonkeyDust	rawjarhead hit F2 when you see 'no signal', so you enter the boot sequense menu, select USB	17:37
rawjarhead	MonkeyDust: Okay. I believe the computer does not have windows at all, though -- this shouldn't be a problem?	17:38
rawjarhead	Like ,I thinkthe orignal Ubuntu install replaced windows, will f2 still work	17:38
MonkeyDust	rawjarhead windows is irrelevant	17:38
rawjarhead	Okay	17:38
rawjarhead	Thanks, I'll try it	17:38
rawjarhead	It's strange though. I get maybe 20-50ms before it goes straight to th dashboard	17:39
akik	rawjarhead: boot menu can be some other key too such as f12	17:39
akik	rawjarhead: if you go into the bios of the machine, you can set the boot order there	17:39
rawjarhead	Does it depends on the Ubuntu dist?	17:40
akik	rawjarhead: no they are outside of the operating system	17:40
rawjarhead	I see, its lower level	17:40
rawjarhead	Access BIOS via f12 or f2. Grub menu is OS - level	17:40
rawjarhead	?	17:40
akik	rawjarhead: yes grub is of ubuntu operating system	17:40
rawjarhead	i see	17:41
rawjarhead	So grub cannot help me with booting from usb	17:41
MWM	you should just be able to enter the boot menu and chooose your usb stick from there	17:41
rawjarhead	enter the boot menu is very vague. this is what f2/f12 does for me?	17:41
=== raspberr_ is now known as raspberrypifan
MWM	are you sure that your stick has been made bootable> how did you make it?	17:41
MonkeyDust	rawjarhead f12 for the boot sequence menu	17:42
rawjarhead	I literally just downloaded the iso and moved it to the stick That's what I did last time, when installing on my lenovo	17:42
rawjarhead	This is a new stick -- my old one has been lost to the void.	17:42
MonkeyDust	rawjarhead what program did you use to make the live usb stick?	17:42
rawjarhead	This new stick is one of those shitty free ones you get at a conference	17:42
rawjarhead	I didn't yet. What do you mean?	17:43
theperfectpunk_	Hi, is it possible to reload the mouse driver in kernel with a different mouse driver in ubuntu	17:43
theperfectpunk_	?	17:43
ioria	rawjarhead, you cannot just copy the iso on the usb ...	17:43
MonkeyDust	rawjarhead first create a live usb stick, then from it (with f12 during startup)	17:43
MonkeyDust	then boot from it*	17:43
MWM	http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-ubuntu	17:44
akik	theperfectpunk_: it's possible to start using imps protocol instead of synaptics	17:44
theperfectpunk_	I am having this issue here https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1610666, i suspect this is due to driver	17:44
ubottu	Launchpad bug 1610666 in xorg (Ubuntu) "Mouse cursor moves choppy/doesn't update its position as it should" [Undecided,New]	17:44
MWM	@ rawjarhead : you said you had a working system right?	17:44
rawjarhead	yes	17:44
theperfectpunk_	akik: i'm not using a synaptics touchpad	17:45
rawjarhead	MWM: actually, no. it's corrupt and unresponsive, thats why we're getting rid of it	17:45
MWM	then follow the link I gave a second ago and it will help you make a live usb. this will get you on the road to a fresh install	17:45
rawjarhead	I only have windows 7 or mac osx	17:45
theperfectpunk_	akik: my mouse gets detected as E-Signal USB Gaming Mouse, I think if i use a generic mouse driver	17:45
akik	theperfectpunk_: ok sorry i don't know what would make it better	17:46
MonkeyDust	rawjarhead in windows, use YUMMI or so, to create a live usb stick	17:46
theperfectpunk_	the problem will get solved	17:46
MWM	http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows for making a live stick in windows	17:46
rawjarhead	I see i remember now, I had to use this YUMI way back in college when I got 14.04 on my lenovo	17:46
rawjarhead	MWM: thanks, I'll do that..	17:47
=== krc4267\|sleep is now known as krc4267_
akik	theperfectpunk_: the option to change from synaptics to imps is "psmouse.proto=imps" so it has something to do with the mouse	17:50
akik	theperfectpunk_: maybe give that a try? it's a kernel parameter	17:50
theperfectpunk_	akik: i'll give it a whirl	17:51
=== burtons is now known as BusFactor1
theperfectpunk_	doesn't work	17:56
theperfectpunk_	https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1610666	17:56
ubottu	Launchpad bug 1610666 in xorg (Ubuntu) "Mouse cursor moves choppy/doesn't update its position as it should" [Undecided,New]	17:56
rawjarhead	MWM: booting from USB will allow me to install ubuntu permanently on the computer?	17:59
sigmaMX	hello	17:59
sigmaMX	somebody speak spanish?	17:59
gnac	Question about the redistribution clauses of Ubuntu. What constitues a modification to the distribution?	17:59
dax	ubottu: es \| sigmaMX	17:59
ubottu	sigmaMX: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro.	17:59
MWM	rawjarhead: yes	18:00
gnac	If I install Ubuntu onto a system, then install my own applications/software on top of it, then distribute that sytem to a commercial customer, is that a modification to the distribution.	18:00
MWM	you may also be able to fix your old install from the live environment, but that is over my head a bit.	18:01
dax	gnac: if you're referring to Canonical's IPrights policy, contact Canonical. There's a link at the bottom of the policy.	18:01
gnac	dax: ty	18:01
kvmmm	anyone here use Flux?	18:01
xMopxShell	how do I automatically install the relevant linux-headers when the kernel is upgrade?	18:02
MWM	82% I have been "waiting for headers" since 12:14 and am at 82% :D	18:03
xMopxShell	I've read that installing linux-headers-generic prior to upgrading the kernel should do it, but i'm not having any luck	18:03
OerHeks	kvmmm, redshift is available in ubuntu, flux is not.	18:03
DAN-NI	is chromium better than firefox?	18:04
dax	try them both, decide for yourself	18:06
sigmaMX	question about Compiz	18:06
sigmaMX	somebody to reply?	18:06
MWM	xMopxShell: http://askubuntu.com/questions/75709/how-do-i-install-kernel-header-files says "linux-generic" is what you need not "linux-headers-generic"	18:06
OerHeks	sigmaMX, ask wait and see	18:06
rattlebattle79	sigmaMX: depends on the question, I guess	18:06
MWM	I was just looking at that page, and had just read it....	18:06
exoalexander	is this a support channel	18:07
OerHeks	exoalexander, yes, see the topic	18:08
exoalexander	is ther a built in programming tool	18:08
OerHeks	!ide	18:09
ubottu	Programming editors/suites: Terminal-based: vi/vim, emacs - KDE: Kate, KDevelop, Quanta+, Umbrello - GNOME: gvim, gedit, anjuta, pida, monodevelop, geany - Others: eclipse, netbeans, qtcreator	18:09
OerHeks	exoalexander, not build-in, but easy to install	18:09
exoalexander	is that for ubuntu 16.04.1	18:09
OerHeks	for any supported ubuntu..	18:10
exoalexander	i just need a developing tool like basic-246 in linux mint	18:10
OerHeks	exoalexander, but mint is not supported here.. those tools you find in softwarecenter	18:11
exoalexander	ok	18:11
exoalexander	i came to Ubuntu by earasing my Pearl OS installation usb	18:12
MWM	whoohoo! apt-get has moved forward 1% in the last 10min making 83%. any day now ! :)	18:13
exoalexander	also is there Ubuntu TLS	18:13
OerHeks	exoalexander, why do you ask, as you like mint?	18:13
exoalexander	i was saying a program app that i was asking if i can get the same coding tool that is supported with mint	18:15
exoalexander	and yes i do like miint but i'm not running it	18:15
MonkeyDust	exoalexander what's the output of cat /etc/issue	18:15
ritas	hi itunes 10 doesn work can anybody help?	18:16
exoalexander	is that terminal command	18:16
MonkeyDust	exoalexander yes	18:16
OerHeks	ritas, nobody can, see the wineHQ database	18:17
OerHeks	!wine	18:17
ubottu	WINE is a compatibility layer for running Windows programs on GNU/Linux - More information: https://help.ubuntu.com/community/Wine - Search the !AppDB for application compatibility ratings - Join #winehq for application help - See !virtualizers for running Windows (or another OS) inside Ubuntu	18:17
exoalexander	Ubuntu 16.04.1 LTS	18:17
ritas	what can i do	18:18
lucidguy	Can anyone recommend a nice plain/basic window manager/login app. lightdm and sddm are a little much	18:18
OerHeks	ritas, use an other tool, https://help.ubuntu.com/community/PortableDevices/iPhone i don't know which one, i don't own such prop hardware.	18:19
ritas	thanks a lot	18:20
OerHeks	lucidguy, "lightdm and sddm are a little much" ?? they are pretty slick	18:21
lucidguy	OerHeks: I hate how most sddm themes show an icon for every account, I want a simple login and password field	18:22
OerHeks	lucidguy, lightdm is easy to tweak, hiding users and such, i don't know about sddm	18:27
OerHeks	maybe the #kubuntu channel?	18:27
anonymous_	hi	18:29
kenneth_	hello	18:29
anonymous_	guys sameone help me	18:29
ubuntu019	How do I upgrade to Ubuntu 16.04.01 from Ubuntu 16.04	18:29
xMopxShell	MWM: thanks	18:30
_adb	lucidguy: i use lightdm with a config that includes "greeter-hide-users=true"	18:30
MWM	was I right?! Im amazing then ! Whoo hoo!	18:30
OerHeks	ubuntu019, just update, i guess?	18:30
ubuntu019	I have done it, but it still shows 16.04	18:31
_adb	!ask \| anonymous_	18:31
ubottu	anonymous_: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience	18:31
lc_	need help installed ubuntu 16.04.1 but it will not let me install the broadcom wifi drivers why	18:31
ubuntu019	lsb_release -a	18:31
MWM	if I skip apt configuration during install will my sources.list still be built correctly?	18:33
tgm4883	ubuntu019: what commands did you run to update?	18:34
ubuntu019	apt update && apt dist-upgrade	18:34
OerHeks	MWM, go try it? never heard of such silly question	18:34
tgm4883	ubuntu019: did you run those with sudo?	18:35
ubuntu019	Yes	18:35
tgm4883	ubuntu019: run them again and pastebin the output. That should be all that is necessary	18:35
ubuntu019	0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.	18:36
tgm4883	ubuntu019: that's not the full output, and that's not pastebin	18:36
MWM	@OerHeks apt was taking a long time (read: hours) waiting for headers inside the OS. Now it is doing the same during fresh installation	18:38
ubuntu019	http://pastebin.com/VpyXK1D0	18:38
V7	What do thinking about http://douaneapp.com/ ?	18:38
MWM	my guess was to finish the installation and then fix apt from inside the IS	18:38
tgm4883	ubuntu019: Is this a raspberry pi?	18:38
MonkeyDust	V7 ask in #ubuntu-offtopic, not here	18:39
ubuntu019	No	18:39
EriC^^	MWM: pastebin /etc/apt/sources.list	18:39
V7	MonkeyDust: ?	18:39
tgm4883	ubuntu019: what device is this then?	18:39
ubuntu019	It is a C1 from Scaleway	18:39
tgm4883	ubuntu019: then you need to open a ticket from them	18:39
tgm4883	ubuntu019: because they've screwed with your repos	18:40
ubuntu019	What do you mean?	18:40
MWM	EriC^^ : I got sick of waiting for apt and decided to reinstall. I am waiting for apt to configure in the installer right now, and it seems like it is doing the same thing	18:40
EriC^^	MWM: which installer is that?	18:40
V7	MonkeyDust: If you're so clever then why when Ubuntu upgrades from 14.04 to 16.04 then system start ups with 4 minutes ?!	18:41
V7	After upgrade *	18:41
MWM	EriC^^ : Ubuntu Server 16.04	18:41
tgm4883	ubuntu019: I mean, you aren't using standard repositories. Heck, you're not even using what I'd call an official repository. So you need to open a ticket with Scaleway and ask them how to upgrade to 16.04.1	18:41
EriC^^	MWM: ok	18:41
ubuntu019	Okay	18:41
Moeh	Hey guys, so I use a VM with Ubuntu Server 16.04 with Parallels Desktop on an OSX El Capitan host. I shared a folder with the guest, however the file system access is extremely slow for the shared files. One of the folders is an Ember JS app, and when a file changes it takes 6s to rebuild. When I use the folder normally on the VM, it does it in 60ms. Is there anything I can improve in the Ubuntu VM to speed up the fs access to the shared folders?	18:42
tgm4883	ubuntu019: out of curiousity, what is the output of 'uname -a'	18:42
MonkeyDust	V7 use systemd-analyze to see what makes it slow ... also try systtemd-analyze blame	18:42
ubuntu019	Linux example.com 4.5.4-std-1 #1 SMP Thu May 19 16:43:21 UTC 2016 armv7l armv7l armv7l GNU/Linux	18:42
V7	MonkeyDust: Startup finished in 9.771s (kernel) + 4min 35.757s (userspace) = 4min 45.528s	18:42
tgm4883	ubuntu019: yea that's kinda what I was expecting. Not even on an x86/64 based processor	18:43
tgm4883	ubuntu019: you definitely should ask scaleway about upgrading	18:43
MonkeyDust	V7 ok, now ... systemd-analyze blame	18:43
ubuntu019	Okay	18:43
* tgm4883 adds scaleway to the list of VPS he won't use		18:43
MWM	EriC^^ : file 7 of 66 after all this time, and I have a decent connection	18:44
markus_	/exit	18:45
V7	MonkeyDust: http://pastebin.com/GBzvGR5D	18:45
MonkeyDust	V7 is that a server?	18:46
V7	Personal, but ... for WEB development ... \o/	18:47
dangernoodle	Anyone there?	18:47
V7	dangernoodle: Where ::) ?	18:48
MonkeyDust	dangernoodle type /names	18:48
MWM	I think they are over there, but I am right here.....	18:48
dangernoodle	Good, wouldn't want you anywher else	18:48
gamester	Why does a window, when maximized by clicking the maximize button, MOVE to a DIFFERENT workspace in some OBSCURE cases where PART of the window is in a different workspace?!?	18:48
gamester	when*	18:48
MonkeyDust	V7 find out which services you don't use or need, then disable them	18:48
gamester	I'm just imagining a granny right about now. "Oh hmm I better maximize this window." PHOOMPH! The window has DISAPPEARED.	18:49
tgm4883	gamester: sounds like a bug	18:49
V7	MonkeyDust: Am I right ? All these services starts when I'm starting my comp. ?	18:49
tgm4883	gamester: but to be fair, grannies don't usually have multiple workspaces	18:49
V7	Then when all of them started - I see the Desktop	18:49
MonkeyDust	V7 yes ... also, type this sudo service --status-all	18:50
V7	MonkeyDust: http://pastebin.com/z4DsE9fA	18:51
gamester	trouble is all desktop linux software is this - just trash after trash after trash - endless bullshit. -- Oh hey I need to navigate to .julia, hmm how do I do that? The folder is hidden. I CANT input the PATH in nautilus, because fuck you, and I cant seem to enable seeing hidden folders, because FUCK YOU.	18:51
V7	Also ... thank you ... anyway !	18:51
V7	really	18:51
gamester	5 minutes of linux and I've had enough for today	18:51
V7	gamester: o.o ?	18:52
bumblefuzz	is there a dark pidgin theme?	18:52
MonkeyDust	V7 do you see anything you don't need or use? there's this command, BUT be careful with it sudo sysv-rc-conf	18:52
gamester	I'm just imagining granny right now. "Oh hmm I need to go into /home/granny/.julia" But WAIT, I CANT! I need to open terminal or something obscure like that.	18:52
V7	MonkeyDust: sudo: sysv-rc-conf: command not found	18:53
MonkeyDust	gamester great, but keep this channel free for support	18:53
Jakey3	what strength does the ssh key generated from "ssh-keygen -t rsa"	18:53
gamester	MonkeyDust: okay. How do I navigate into hidden folders using a GUI program like "Files"? (Nautilus)	18:53
=== precise\|snek is now known as precise\|terroris
MonkeyDust	gamester ctrl h	18:54
=== precise\|terroris is now known as precise\|snek
gamester	MonkeyDust: how does granny do it without keyboard shortcuts? She only has 1 finger.	18:54
V7	Jakey3: SSH-2 RSA encryption should be used, with a 2048 bit key length	18:54
MonkeyDust	V7 you can sudo apt install sysv-rc-conf	18:55
Jakey3	V7, what command in terminal to create this	18:55
V7	MonkeyDust: Thanks ;)	18:55
V7	MonkeyDust: What's your distro ?	18:55
MonkeyDust	V7 right now, 'the distro that should not be named'	18:55
gamester	MonkeyDust: SEE! 5 minutes of using Ubuntu and I've already discovered something that's going to cause HUNDREDS OF MILLIONS of people pain. Because FUCK having designers with IQ 80+	18:55
MonkeyDust	gamester stop	18:55
V7	MonkeyDust: Holy moly ...	18:56
V7	gamester: ?	18:56
gamester	V7: How does a granny navigate into a hidden folder?	18:56
gamester	And that's btw how I want to navigate	18:56
gamester	I dont want to remember another keyboard shortcut	18:56
gamester	or to go into a terminal	18:57
V7	gamester: How does a granny do this in Windows ?	18:57
gamester	right click, see hidden folders, done	18:57
gamester	right click, properties, see hidden folders, done	18:57
YankDownUnder	04:56 on a Friday morning - have IQ's suddenly dropped overnight?	18:57
MonkeyDust	gamester on top: View > Show hidden files	18:57
V7	gamester: Why granny should see hidden folder ?	18:58
MWM	can someone paste bin /etc/apt/sources.list from Ubuntu 16.04 please? I need to compare mine	18:58
gamester	MonkeyDust: Thanks, I couldn't find it. It was those damn elusive window bars not attached to windows. You never see them.	18:58
gamester	Well, they work better on osx so you get used to using them there, not here imo	18:59
gamester	ok im out	18:59
gran	Hello, can somebody help me fix my grub file? I restarted my computer after an update (that didn't complete) and now it jumps straight to my windows partition.	18:59
V7	MWM: http://pastebin.com/gJqQPKAN	18:59
gamester	V7: because granny needs to program in julia, and there's a compilation error in a file inside .julia folder that needs to be looked at.	19:00
MWM	V7: thanks	19:00
gran	I already tried BootRepair, but it didn't work in spite of saying that my boot file was now fixed.	19:00
V7	gamester: Why granny needs to program in julia ?!	19:00
V7	MWM: aw	19:00
win32	Hi any help =D	19:00
win32	bash: ulimit: open files: cannot modify limit: Operation not permitted	19:01
tgm4883	gamester: stop trolling please	19:01
V7	Hey win32, DOS fckd up :D ?	19:01
win32	V7 ? sorry hat.	19:01
win32	what	19:01
gamester	tgm4883: I'm not. Granny means me in a mood that does not want to learn another keyboard shortcut.	19:01
gamester	It would be an honor to be banned for rightfully complaining about shitty software that's going to bring hundreds of millions of people pain.	19:02
gamester	Nautilus needs to allow editing file paths	19:02
dangernoodle	gamester: hundreds of millions?	19:02
gamester	yes	19:02
tgm4883	gamester: first, this is the wrong channel for this as it's not support	19:03
gran	To make things a tad more complicated, my hdd is set up with lvm. I have the output of the BootRepair attempt on pastebin, if it's of interest..._	19:03
gran	?	19:03
V7	gamester: I think ... Ubuntu designed really comfortable for your granny's use ... 'cause she doesn't need to "program in julia" ... she needs: surf web, skype, viber, movies, music, photos ...	19:03
vanishing	editing file path? o.o	19:03
V7	All of this ... Ubuntu and other else nice distro ... created nice	19:03
gamester	vanishing: I mean manually writing the file path to visit instead of clicking folders	19:04
V7	Editing file paths o.o ?	19:04
ioria	gamester, ctrl+l	19:04
vanishing	i think you can, by typing /	19:04
dangernoodle	gamester: try CTRL+L?	19:04
gamester	ioria: there it is, thanks. Too bad it's hard to discover these features.	19:05
V7	hahah	19:05
V7	ga	19:05
ioria	gamester, another shortcut .... :þ	19:05
gamester	folder path*	19:05
gamester	ok my day is now going to be better, day saved. Bye.	19:06
ioria	gamester, also Go -> Enter Location	19:06
gran	Not sure if i have voice on this channel... anyone please confirm and I'll wait for help...?	19:06
V7	gamester: F1'll help you	19:06
V7	gran: confirmed	19:06
gran	V7: Cheers	19:07
V7	o/	19:07
gebruiker	I installed ubuntu on my computer but unity runs very slow	19:08
gebruiker	windows 10 seems to be running ok in comparison	19:08
V7	gebruiker: Graphics or system ?	19:08
gebruiker	i want to stay with ubuntu can anyone suggest some tweaks?	19:08
V7	compiz maybe ..	19:08
=== darek is now known as Guest13456
gebruiker	V7, system wize it seems	19:09
gebruiker	somtimes it seems to lag when I openup the "start menu"	19:09
=== Chunkyz_ is now known as Chunkyz
gran	Anyone here knowledeable about booty(ng)?	19:09
Ntemis	booty?	19:09
gran	heheh, booting	19:10
Ntemis	boot-y	19:10
gran	But I like that spelling better.	19:10
Ntemis	muchy	19:10
ioria	gebruiker, your hw specs ?	19:10
gran	So, can you help me out?	19:10
Ntemis	about what?	19:10
V7	MonkeyDust: Also .. really thank	19:11
gebruiker	ioria, just a moment	19:11
gran	My grub file is broken.	19:11
V7	thanks *	19:11
Ntemis	ah	19:11
OerHeks	gran, any more info ?	19:11
Ntemis	sudo grub-update	19:11
Ntemis	will fix it for you	19:11
gran	I restarted my ubuntu 14.04 box after an incomplete update and now it skips straight to windows.	19:11
MWM	gran: you can use a live usb to get into your system and reinstall grub. you will have to google how to reinstall it though as I dont remeber off the top of my head	19:11
Ntemis	hrm... update-grub	19:12
Ntemis	keep forgetting the order lol	19:12
OerHeks	gran, hold shift@ boot, go into recovery (alt F1 make RW), and login, perform: Sudo dpkg --configure -a ### run apt install -f, all should be fine now	19:12
gran	Thanks Ntemis and MWM, I'm already there. Tried Boot-Repair but no joy.	19:12
V7	gran: Yeah ... you need to reainstall it by live cd ... or by grub usb stick or smth. like that	19:12
^7heo	hey.	19:12
^7heo	in bash:	19:12
^7heo	$ time curl -i http://duckduckgo.com/	19:12
^7heo	... works ...	19:12
^7heo	$ 2>&1 time curl -i http://duckduckgo.com/	19:13
^7heo	bash: time: command not found	19:13
Ntemis	gran	19:13
OerHeks	!bash	19:13
ubottu	The linux terminal or command-line interface is very powerful. Open a terminal via Applications -> Accessories -> Terminal (Gnome), K-menu -> System -> Konsole (KDE), or Menu -> Accessories -> LXTerminal (LXDE). Guide: https://help.ubuntu.com/community/UsingTheTerminal	19:13
gran	I have the output on pastebin if you want to look at it.	19:13
^7heo	can anyone tell me why? =/	19:13
Ntemis	just find out your sdx you want grub onto	19:13
MWM	well there isnt anythig wrong with sources.list but apt is still broken. I know there is a) nothing wrong with my connection b) sources.list is solid	19:13
^7heo	OerHeks: meaning "go ask on #bash"?	19:13
gebruiker	ioria, & V7 http://pastebin.com/hwf3vw2X	19:13
Ntemis	you did?	19:13
OerHeks	gran, again: hold shift@ boot, go into recovery (alt F1 make RW), and login, perform: Sudo dpkg --configure -a ### run apt install -f, all should be fine now	19:13
V7	gebruiker: ?	19:14
OerHeks	no 7heo, not for you	19:14
gran	paste.ubuntu.com/23036681	19:14
Ntemis	OerHeks: isnt his grub broken?	19:14
gran	ok, OerHeks , V7, I'll try that	19:14
OerHeks	Ntemis, how do we tell, if he didn't try to get there	19:14
ioria	gebruiker, dual booting ?	19:14
gebruiker	V7, so what do you think about my system specs and my question	19:15
gebruiker	ioria, no I had it running instead of windows, I just ire-instaleld it. I am planning to buy another hd to install ubuntu on so I can switch more easily	19:15
V7	gran: 3 disks huh >	19:15
gebruiker	iooner, but first I need to know if it is worth it with my current system	19:15
V7	gebruiker: All should work fine ...	19:16
ioria	gebruiker, you have 3 giga ram and a dual core cpu ... it's ok	19:16
vaindil	I'm trying to create symlink for a file, but ln -sT is creating a directory in the destination instead of linking the file. What am I missing?	19:16
ioria	gebruiker, but i don't get where you get that list from	19:17
gran	Yes, dual booting.	19:17
gran	Things are further complicated by LVM.	19:17
gran	oh, haha	19:17
gran	sorry, answered someone else's question	19:17
gran	V7, single physical disk. A number of partitions. Two OS.	19:17
Tom____	The "Scaleway guy" here, I fixed it -- I just needed to add deb http://mirror.scaleway.com/ubuntu-ports xenial main universe	19:17
V7	ioria: system-info	19:17
MWM	Tom: have you tried switching the destination and the source? I usually get them transposed myself	19:17
ioria	V7 oh, ok	19:17
gebruiker	ioria, a program I just installed to list my system specs	19:18
V7	in cmd	19:18
gebruiker	ioria, it is called system spec	19:18
Tom____	I mean deb http://mirror.scaleway.com/ubuntu-ports xenial-updates main universe	19:18
ioria	gebruiker, ok... can you run free -m	19:18
gebruiker	ioria, no I am currently running windows. My ubuntu installation was default I only added chrome	19:20
ioria	gebruiker, ok	19:22
OerHeks	gebruiker, that hd5xxx is supported by the open radeon driver, the rest of the system is no racemonster too. but should work.	19:23
OerHeks	just don't play 3 youtube videos at once	19:23
MWM	2.5 hours of troubleshooting and I was using the wrong network adapter in the VM	19:24
MWM	because Im smart like that :D	19:24
gebruiker	OerHeks, yes but the system loads fast, i was hoping that when I installed ubuntu my system would be more responsive but now it feels slower than windows 10	19:25
ioria	gebruiker, you should boot in your ubuntu, then	19:26
OerHeks	gebruiker, install unity-tweak-tool, and fiddle around with settings	19:27
ioria	gebruiker, so we can check ram, logs, etc., etc ..	19:27
OerHeks	that would be wise, asking questions while you could have booted in ubuntu..	19:27
gebruiker	ok will be back soon ( not today though) thanks	19:29
ioria	gebruiker, you're welcome	19:29
gebruiker	ah yeah one more question which browser preforms better in your experience chromium or chrome'?	19:29
ioria	firefox	19:29
ioria	:)	19:29
gebruiker	ioria, and if i decide to buy a new compuiter in the future what video card brand is best supporeted by untuntu ? I was thinking about nvidia, thoughts?	19:32
ioria	gebruiker, on linux, anyone , probably, will suggest you Intel ...	19:32
gebruiker	ok thanks	19:32
gebruiker	bye	19:33
ioria	gebruiker, bye	19:33
idjyut	So I have ssh access to a remote machine. I tried to change the network interface settings to give it a static IP. I must have gotten something wrong, as it's not coming back online. Anything I can do other than get physical access to the machine?	19:33
MichaelP	Anyone know anything about neon... about hour in there channel nobody answer. It's using 16.04 LTS.... trying to change the repo mirrirs for ubuntu... I installed muon... i go settings.. configure software sources.. password screen opos up... Saying command ' '' --attach 20971525 --dont-update'.	19:33
=== AvadaKedavra is now known as alazare619
Sampson	Hello... Does anyone have the terminal code that works for Open JDK 7	19:34
Sampson	trying to get Blackboard to work it is a JAVA based program	19:34
Sampson	using 16.04	19:34
_adb	idjyut: depends... if the static ip config didn't stick and it's still using dhcp, it may be back up on the original ip. otherwise, you can try checking dhcp server logs (if you have them) to see what's new. if it's a small network, and ips are likely to be consecutive, you may be able to guess the new IP	19:35
idjyut	Hmm, yea I'll try that thanks	19:36
tgm4883	Sampson: the terminal code?	19:37
Sampson	tgm: for open JDK 7	19:38
Sampson	tgm: I wan to run a java program called blackboard using open JDK 7	19:38
tgm4883	!tab \| Sampson	19:39
ubottu	Sampson: You can use your <tab> key for autocompletion of nicknames in IRC, as well as for completion of filenames and programs on the command line.	19:39
tgm4883	Sampson: so you need to install open jdk 7 then or just run it?	19:40
Sampson	run	19:40
=== Isai is now known as Agent
tgm4883	Sampson: to run, you just type 'java'	19:41
Sampson	hrm kk	19:42
pavlos	Sampson, type java -version it should tell you if you have it and which version	19:42
tgm4883	Sampson: I'm assuming there are other options that may be needed for blackboard, but that would be in the blackboard documentation	19:42
Sampson	kk	19:42
ioria	Sampson, how's your spanish ? :-)	19:43
ioria	Sampson, https://www.youtube.com/watch?v=MOc4tebfjIo	19:43
=== gianni is now known as Guest64456
seanjohnson	why would they make a linux for niggers?	19:51
trett	wasap?	19:53
l9	the moon	19:53
OerHeks	whatsap? nope	19:53
trett	that's deep	19:53
OerHeks	use telegram	19:53
V7	Is there any script for showing ips per process ?	19:53
trett	telegram is for pussies, use morse	19:54
bekks	V7: "ips per process"?	19:54
_adb	V7: what do you mean? like netstat?	19:54
l9	sockstat	19:54
V7	bekks: Yeah ... network used per process ... even ips	19:55
trett	http://serverfault.com/questions/586774/getting-iops-of-the-processes-on-linux	19:55
_adb	V7: are you trying to determine, for example, on a machine that has multiple NICs, which process is listening on port 80 on a particular IP or are you looking more for usage statistics of your applications and network cards, like bandwidth consumption?	19:56
V7	_adb: 2	19:56
tgm4883	V7: 2?	19:57
_adb	V7: http://serverfault.com/questions/36586/how-can-i-monitor-network-i-o-usage-per-process-under-linux suggests nethogs	19:57
V7	tgm4883: 2 = second decision	19:58
V7	_adb: Thank you ! I'll check	19:58
tgm4883	V7: ah. Well, if someone (_adb) is going through all the effort of helping you the least you could do is respond with more than a single character	19:59
* l9 wanders into freeNAS		20:00
=== Clarissa is now known as OdaMaeBrown
V7	tgm4883: Sorry	20:01
whlai_	I'm executting an install with: ./install.sh	20:03
whlai_	how do I execute that so I see what's happening?	20:04
whlai_	live a verbose output	20:04
whlai_	or echo	20:04
l9	need it into a file or on your screen ?	20:04
whlai_	either	20:04
akik	whlai_: sh -x install.sh	20:04
l9	./ should print too terminal	20:05
akik	whlai_: if it's a bash script, use bash -x install.sh	20:05
l9	shouldnt it?	20:05
Pici	That may be too much information though	20:05
whlai_	sh -x worked	20:05
akik	because for some funny reason sh is dash on ubuntu	20:05
=== OdaMaeBrown is now known as CathyEarnshaw
whlai_	actually, I spoke too soon	20:05
whlai_	:D	20:05
whlai_	: not found	20:06
whlai_	+ �	20:06
whlai_	metasploit-latest-linux-x64-installer.run: 4: metasploit-latest-linux-x64-installer.run: �: not found	20:06
whlai_	metasploit-latest-linux-x64-installer.run: 5: metasploit-latest-linux-x64-installer.run: Syntax error: ")" unexpected	20:06
l9	please dont paste in to chan	20:06
whlai_	sorry	20:06
l9	pastebinit	20:06
=== Guest55271 is now known as minsky
OerHeks	uhoh, your system is a zombie now	20:06
whlai_	l9: this is a binary file I'm executing	20:08
whlai_	will that affect my ability to log?	20:08
jatt	jeez	20:08
whlai_	basically, I'm getting all the way to the end of an install and then it hangs. trying to see what's heppening.	20:08
akik	whlai_: it doesn't output any error on the terminal?	20:09
l9	OerHeks: help him unzombie his system so that i dont loose sleep over this zombie	20:09
whlai_	can I get anything intelligible when looking at output from script that is binary file?	20:09
jatt	strace	20:10
Groooot_	Hi guys. I've got some weirdness going on with grub. I had a ubuntu/windows 10 dual boot, and installed over the linux with a new ubuntu install. It seems to have brought a new grub menu, but when I open grub-customizer I see the old menu.	20:11
backbox	hello kidies	20:13
V7	sudo apt-get install etherape	20:13
V7	oops sry	20:13
whlai_	akik no	20:13
whlai_	installer launches GUI	20:13
whlai_	gets to the end of the install and hangs	20:13
asar	can anyone help me with verified paypal account. paypal isnt available in my country	20:13
OerHeks	asar, wrong channel for that, ubuntu support only. and carefull with financial details on irc, just saying ..	20:14
asar	OerHeks: thanks	20:15
whlai_	akik: http://codepaste.net/ug32wu	20:15
whlai_	that's if I try to get output	20:16
ash_workz	re: http://imgs.xkcd.com/comics/backups.png — "Cueball determines that this setup leads to an exponential growth, implying that each node in the cycle simply copies files over to the next without any effort to avoid duplicates. Indeed, each time a set of files completes a full cycle, duplicates of the same files are propagated." -explainxkcd.com — what? those sound like contradictory...	20:16
ash_workz	...statements	20:16
gran	Hi, I was here a few minutes ago trying to get advice to fix my grub file. tried it but didn't work. Can someone help?	20:17
tgm4883	ash_workz: not support	20:17
akik	whlai_: that's not a script	20:17
ash_workz	tgm4883: you're saying it's OT; Can you suggest a channel?	20:18
tgm4883	!ot \| ash_workz	20:18
ubottu	ash_workz: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please register with NickServ (see /msg ubottu !register) and use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!	20:18
gran	V7, are you still around?	20:18
whlai_	akik: ?	20:18
pavlos	gran, usually update-grub solves issues	20:18
akik	whlai_: it's an elf binary	20:18
V7	gran: yeah, I'm here ;)	20:18
ash_workz	tgm4883: :\	20:18
whlai_	can I get the output of it?	20:18
whlai_	as it's running or after?	20:18
gran	pavlos, thanks, the thing is I'm not logged into my usual ubuntu session	20:18
whlai_	or does that not really make sense?	20:19
tgm4883	ash_workz: what? #ubuntu-offtopic doesn't work for you?	20:19
gran	pavlos, V7 , I'm using a live usb, so if i update grub won't it just update the grub on the usb/	20:19
ash_workz	tgm4883: oh, I didn't know you were suggesting that! :)	20:19
akik	whlai_: you can get some info with strace, for example "strace -e open ./metasploit-latest-linux-x64-installer.run"	20:19
tgm4883	ash_workz: well you should read the output from ubottu then :)	20:19
akik	whlai_: that'll show the files it opens	20:19
whlai_	thanks akik	20:20
ash_workz	tgm4883: yeah, my bad; I see many OT commands just print: "we don't support that question"	20:20
ash_workz	tgm4883: thanks though :: thumbs up ::	20:20
linux	Hi , Is there an addon in firefox lets to me save many pages at same time.	20:21
gran	V7, pavlos , maybe I can give you some more info and perhpas you'll help me figure it out?	20:21
ash_workz	linux /at moznet/#firefox ; also, checkout 1 tab maybe?	20:22
pavlos	gran, you run a live sessions and want to modify grub?	20:22
V7	gran: Am I right ? You can't load into Ubuntu or what ?	20:22
V7	You haven't grub and Windows infinitly load s ?	20:22
gran	V7, pavlos ... I'll take that as a 'yes' ;) . I already tried using BootRepair, but it didn't help although it said my grub was fixed now.	20:23
krobzaur	Got a question. Whats this difference between installing one of the Ubuntu spins from scratch (say xubuntu), vs. just installing it using apt from within the default desktop environment?	20:23
krobzaur	Is Xubuntu optimized in some way? Or does it pull from different package repositories?	20:23
terrible	someone can help me when i trying to convert a movie with the devede software give me this error http://picpaste.com/Screenshot_from_2016-08-11_16-13-18-L6nLx4R3.png	20:23
V7	gran: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows ?	20:24
gran	V7, pavlos , it may be that the reason is that my installation uses LVM. I mounted the LVs and backed up my files, but I don't know what to do next.	20:24
=== jstein_ is now known as jstein
gran	V7, thanks, i'll read it. although I did not just install Windows. This happened after an incomplete update on ubuntu 14.04.	20:25
V7	gran: http://askubuntu.com/questions/88384/how-can-i-repair-grub-how-to-get-ubuntu-back-after-installing-windows	20:25
dax	krobzaur: same repositories, same packages, just different default installed packages	20:25
dax	krobzaur: so assuming you add/remove the right packages, they'll be the same	20:26
CodeMouse92	What's the difference between .bashrc and .profile?	20:26
krobzaur	dax: Sweet deal! Thanks	20:26
gebbione	anyone able to suggest how i can let radeon run my HD 5770 gfxconfig correctly so i can extend the desktop to two screens and set correct resolution? http://paste.ubuntu.com/23047420/	20:28
gebbione	what should i add in the xorg.conf	20:28
pavlos	CodeMouse92, cat ~/.profile ... read it	20:29
=== CathyEarnshaw is now known as Clarissa
CodeMouse92	pavlos: I did, but it didn't seem to answer my question. I just found my answer - my .profile is set up to source from .bashrc	20:30
gran	V7, thanks for the link. IT may work, although I am unsure about something. It says I must mount my main partition to /mnt. Given that I'm using LVM, does that change anything?	20:31
gran	V7, like, should i try to mount the 'root' logical volume?	20:31
V7	gran: Try to	20:32
=== Guest72055 is now known as Dice-Man
carpediembaby	Hello, I have a machine which is in a network that can only be accessed through another external machine. I am normally able to connect to it with the following configuration http://pastebin.com/c4aMQzrJ . But now, I am behind a network which uses a proxy. I am not sure how to integrate the proxy settings into all of this. Could someone help?	20:38
bekks	carpediembaby: Unless your proxy allows ssh connections, you cant.	20:39
bekks	carpediembaby: And in addition, it depends on your proxy type.	20:39
carpediembaby	bekks: it does. I can connect to the first host using the proxy	20:40
bekks	carpediembaby: then you are able to connect to your second host as well, dont you?	20:40
carpediembaby	But i don't know how to connect directly to the host inside the private network	20:40
carpediembaby	Its a simple http proxy without authentication	20:40
terrible	someone can help me when i trying to convert a movie with the devede software give me this error http://picpaste.com/Screenshot_from_2016-08-11_16-13-18-L6nLx4R3.png i running ubuntu xenial	20:41
carpediembaby	bekks: No, that is the problem. When using the proxy, I can use hostname2.com -o "ProxyCommand=nc -X connect -x 172.17.31.1:8080 %h %p" but it doesn't work if I use the hostname defined in the config file	20:42
brunch875	Xorg is using 90% cpu	20:44
brunch875	onoo	20:44
brunch875	what's going on?!	20:44
carpediembaby	bekks: Maybe I am not explaining very properly. Machine A is behind machine B. I can connect to host A directly using the configuration I pasted earlier. But that is only when I am on a network which is not using a proxy.	20:47
=== mrjoshtheepic is now known as MrJoshTheEpic
Rimley	How to tell which OS version I have of ubuntu? 32 bit or 64 bit. I'm getting loads of compatibility issues.	20:57
hispeed67	00t3r	20:58
OerHeks	Rimley, systemsettings > details	20:59
amir107	hey guys	20:59
amir107	i found an awesome video	20:59
rawjarhead	What's a fair price to charge a layman (like a restaurant owner) for installing ubuntu on their Dell?	20:59
amir107	that helped me with windows 10 https://www.youtube.com/watch?v=X1nRXSxdnTo&feature=youtu.be	20:59
amir107	https://www.youtube.com/watch?v=X1nRXSxdnTo&feature=youtu.be	20:59
amir107	ok	20:59
OerHeks	amir107, please don't spam....	20:59
rawjarhead	The current stateof the dell is unusable for him.	20:59
amir107	sorry oerheks	20:59
amir107	but i didnt mean too	20:59
amir107	i am not spamming i sent a video to help people	20:59
OerHeks	yes you do, and this is not win10 support	21:00
Pici	amir107: I fail to see how that has anything to do with Ubuntu.	21:00
amir107	sorry	21:00
amir107	wrong channel	21:00
amir107	but https://www.youtube.com/watch?v=X1nRXSxdnTo&feature=youtu.be help if you have windows	21:00
Rimley	I dont see "system settings" anywhere. its a fresh install of 16.04	21:01
OerHeks	rawjarhead, as member i cannot ask money, only a cup of tea or a plate with food.	21:01
tgm4883	rawjarhead: not a support question. But the minimum price you are willing to do it for? Keep in mind you're setting yourself up to be the support person	21:01
tgm4883	OerHeks: you can't ask for money?	21:01
tgm4883	Rimley: open a terminal, type 'uname -a'	21:01
=== icey is now known as icey\|vacation
rawjarhead	I mean I went over to his restuarant, showed him the "try ubuntu 14.04 for free" which let him get on the internet (the computer before did not let him open a browser), and he made me a pizza. But I won't want a fucking pizza, i want cash money. So i told him to backup his files and ill come back later, and do a permanent OS install and re-integrate his files. This I intend to charge him for, maybe $30. Atm the PC is left in the unu	21:04
rawjarhead	Tbh all I did as show him what could be done, and he was happy with it. I didnt wanna do it though since he didnt backup his files yet.	21:05
rawjarhead	now im wondering if a pizza is enough for installing a working ubuntu on someones completley broken PC. what would you guys charge for it if you had to do this for clients?	21:07
* tgm4883 shrugs		21:08
tgm4883	I don't work directly with clients	21:09
rawjarhead	why can you not ask for money?	21:09
rawjarhead	what is the meaning of this o-o	21:09
_adb	beer.	21:09
rawjarhead	man idc about beer	21:09
rawjarhead	i prefer hard.	21:09
rawjarhead	either way i prefer green	21:09
Rimley	Running a rpi 3, cannot get software boutique working and getting error message "Sorry, Welcome could not feature any software for this category that is compatible on this system." Any ideas on a fix? My guess is SB isn't compatible with 64bit.	21:10
_adb	Rimley: i'm unfamiliar with software boutique. quick search looks like it's an ubuntu mate thing? is this used for installing packages? can you just use apt?	21:12
tgm4883	!mate \| Rimley	21:12
ubottu	Rimley: Ubuntu MATE is a supported !flavor of Ubuntu that uses MATE as the default desktop environment. It functions similarly to older versions of GNOME. For more information, see https://ubuntu-mate.org/	21:12
tgm4883	well that's helpful ubottu	21:12
netsrot	Hi, is there any way to update gallium nine wine to 1.9.16 in ubuntu?	21:13
Rimley	Im just diving into the world of Linux so im unfamiliar with any of it. Yes it is for installing packages, is there an alternate I can use? or Another version of Ubuntu I can download that isnt Ubuntu Mate. I just went to the website and downloaded the latest Ubuntu ISO file they had available.	21:14
DarkPsydeLord	Rimley: hi whats the issue with the regular ubuntu?	21:16
_adb	Rimley: in that case, i think you're looking for the software center. unfortunately, this is a tool i know next to nothing about, so hopefully others in this channel will be more helpful than i can	21:16
akik	!flavor \| rimley	21:16
ubottu	rimley: Recognized Ubuntu flavors build on Ubuntu and provide a different user experience out of the box. They are supported both in #ubuntu and in their flavor channel. The current list is: !Edubuntu, !Ubuntu-GNOME, !Kubuntu, Ubuntu !Kylin, !Lubuntu, !Mythbuntu, Ubuntu !Studio, !Xubuntu, and Ubuntu !MATE	21:16
OerHeks	see !arm, i guess	21:16
tgm4883	he's on a raspberry pi 3, you guys should at least recommend stuff that's compatible with that	21:16
DarkPsydeLord	oooooo	21:17
DarkPsydeLord	then yep arm it is	21:17
Rimley	Yes, it has to be ARM compatible.	21:17
tgm4883	Rimley: nothing wrong with mate	21:17
Rimley	thats been my issue I believe. Cant seem to find any compatible.	21:17
tgm4883	Rimley: what are you trying to install?	21:18
DarkPsydeLord	https://wiki.ubuntu.com/ARM/RaspberryPi	21:18
Rimley	tgm4883 Unsure if anyone is familiar with the Odroid line, so I reverted to saying using an RPI 3. Im actually using a Odroid C2, but having many compatibility issues when installing any software or updates. Im going to be using it at as HTPC running Kodi.	21:19
Rimley	But would like to get all the necessary updates and video drivers before setting up KODI	21:20
tgm4883	Rimley: well for starters, don't mislead people about what you have. I'm pretty confident most of us can google things if we're unfamiliar and need to know what an Odroid C2 is	21:20
tgm4883	Rimley: if you're just trying to update, run 'sudo apt update && sudo apt upgrade'	21:21
DontSpeakEng	helo	21:21
Rimley	Understandable, Figured the RPI 3 and Odroid c2 were hand in hand and figured everyone knew the RPI series so used that as an example because theyre practically the same thing.	21:22
DontSpeakEng	what is rpi?	21:22
Rimley	thank you for the Info tgm4883, will give that a go. Just wish I had some sort of software downloader I could use for other apps.	21:22
OerHeks	https://wiki.ubuntu.com/ARM/RaspberryPi	21:22
DontSpeakEng	oooh rpi raspery pi	21:23
DontSpeakEng	why ubuntu have a very ugly ui in a long time?	21:25
DontSpeakEng	ubuntu is very good, but is very ugly xD	21:25
tgm4883	DontSpeakEng: beauty is in the eye of the beholder	21:26
Rimley	tgm4883, do you know of an alternate Software downloader for MATE that supports 64bit	21:26
tgm4883	Rimley: I don't, I haven't spent much time in the gui in my rpi 3	21:27
DontSpeakEng	by example, this concept y very beauty https://www.behance.net/gallery/28804097/Ubuntu-1604-Stupendously-Hot-Charmander-concept very much the default gnome	21:27
DontSpeakEng	why dont make a beauty design?	21:27
DontSpeakEng	not have money for pay an designer?	21:28
OerHeks	you are free to design and publish, if your license matches it might end up as official package. free, ofcourse.	21:29
carpediembaby	Is there a way to ssh through a jump host while being behind a proxy? My current attempt is this: ProxyCommand nc -x172.17.31.1:8080 -Xconnect user@jumphost.com 22 nc inside.host.com 22	21:29
tgm4883	DontSpeakEng: as much fun as it would be to discuss this with you, I don't have time to both translate what you're saying and refute claims you are making that are subjective in nature	21:29
carpediembaby	But it doesn't work	21:29
tgm4883	DontSpeakEng: however if you really want to know more, I suggest you start here https://design.canonical.com/	21:30
DontSpeakEng	thanks for the link	21:32
gran	V7, hi again, I just wanted to let you know that the instructions on the last webpage you pointed me to worked.	21:34
glitchd	hello all	21:35
glitchd	is there a way to install the windows 10 anniversary update without it killing my linux partition?	21:35
OerHeks	glitchd, that is just a rumour.	21:36
OerHeks	else there would be dozen here to complain :-D	21:37
glitchd	OerHeks, there are a ton of complaints about it	21:37
glitchd	google it	21:37
puppylover369	Hey guys. I'm trying to get Beats Audio to work on Ubuntu. I know I have to do something with reassigning audio pins, but I don't know what pins to attach to what	21:37
puppylover369	How do I figure that out?	21:38
glitchd	"windows 10 anniversary update deleted linux partition	21:38
OerHeks	glitchd, no i dont need google. i would notice here..	21:38
glitchd	OerHeks, so youve installed the anniversary update without a problem then?	21:38
OerHeks	tons of posts, even from popey, i know them	21:38
puppylover369	I have a HP Pavilion 17 Notebook (J6U79UA#ABA)	21:38
gran	V7, The only change I made was to mount the root logic volume instead of a regular partition. I then mounted the boot partition, which is not an LV. So for future reference, these instructions work with LVM as well.	21:38
gran	V7, thanks for the help! :)	21:39
jterman	I am running Ubuntu 15.10 and my wireless works fine. I can connect to a wireless network. I am only having problems connecting with a network that has WPA & WPA2 Enterprise with TLS security.	21:40
jterman	When I try to connect to the network it brings up a WPA & WPA2 Enterprise dialog. I change the authentication to TLS and fill out the fields. The connect button never becomes activated.	21:40
puppylover369	jterman, I'm a bit of a newbie and I haven't seen much of your conversation, but have you tried sudo service network-manager restart?	21:41
puppylover369	I know you've probably already tried restarting your network, but just in case you overlooked it	21:42
glitchd	jterman, can you change the authentication needed to for the router?	21:42
glitchd	jterman, also, can you change it to aes insteak tkip?	21:42
glitchd	instead*	21:43
tgm4883	!15.10	21:43
ubottu	Ubuntu 15.10 (Wily Werewolf) was the 23rd release of Ubuntu. Support ended on July 28th, 2016. See !eol, !eolupgrade and http://ubottu.com/y/wily	21:43
jterman	I can't change the authentication, this is a work router. I would say that this is a gui issue	21:43
jterman	All the fields are filled out, but the connect button will not ungray	21:44
tgm4883	jterman: did you check the button to not check the certificate?	21:44
tgm4883	jterman: I'm assuming you don't have the cert	21:44
glitchd	if you change any of the preset options in the gui will the button be clickable?	21:44
tgm4883	jterman: also, you need to upgrade	21:44
OerHeks	why wpa-wpa2 enterprise and not personal ?	21:45
jterman	16.10 has the same problem	21:45
glitchd	jterman, have you checked for a driver update?	21:45
tgm4883	OerHeks: he said it's work not home, and wpa2 enterprise is better?	21:45
tgm4883	jterman: Can you post a screenshot of your config?	21:46
jterman	You can see what I have done at https://ubuntuforums.org/attachment.php?attachmentid=270395&d=1469656644	21:46
Jordy	Hi, I've used these commands: http://askubuntu.com/a/134442/371359 but when I su - or login as the user with a new SSH connection I can still access all the files with nano (just no write powers but I can read configs, I can also browse trough /etc/	21:46
Jordy	How can I prevent the user from cd'ing out of their /home/ dir?	21:46
tgm4883	jterman: hmm, what happens if you check the "No CA certificate is required" checkbox?	21:47
cyberdrake	Hey Ubuntu community, my audio is out of nowhere choppy and distorted (sounds laggy). Using 16.04 - was working fine yesterday.	21:47
n00mada	going to test a dev/ops Ubuntu template with unattended-updates, selecting just security. any suggestions on packages we should exclude? kernel perhaps?	21:48
jterman	no change. It really seems to be a gui issue	21:49
tgm4883	jterman: yea that might be a bug. I'm using tunneled TLS at home and it works fine	21:54
glitchd	jterman, maybe your not in the wireless group..?	21:54
tgm4883	sorry, I'm actually using PEAP	21:54
tgm4883	glitchd: i've just reproduced it here	21:54
glitchd	tgm4883, the button is greyed out?	21:55
tgm4883	yea	21:55
glitchd	tgm4883, problem solved then?	21:55
tgm4883	glitchd: no...	21:55
glitchd	tgm4883, lol damn	21:56
tgm4883	glitchd: it's possibly a bug	21:56
jterman	my connection is TLS	21:56
glitchd	tgm4883, so how does the problem arise?	21:56
tgm4883	glitchd: try to setup your wifi to connect to something using TLS	21:57
glitchd	tgm4883, not seeing an option for tls anywhere	21:58
tgm4883	glitchd: https://ubuntuforums.org/attachment.php?attachmentid=270395&d=1469656644	21:59
glitchd	is that the actual problem?	21:59
glitchd	scratch that response	21:59
glitchd	tgm4883, i dont have that on xubuntu	22:00
glitchd	tgm4883, im using ubuntu 16.04.1 with xubuntu-desktop installed	22:00
=== ivo is now known as Guest98881
=== Guest98881 is now known as ivo_
jemadux	j #geekblogtv	22:04
V7	gran: aw ;D	22:15
V7	Bye bye all	22:15
KeyboardNotFound	I'm reading this: http://www.linux-tutorial.info/modules.php?name=ManPage&sec=7&manpage=init.d and I have question: when we will switch to single user mode and why we need switching to that runlevel ?	22:16
john_rambo	Cant update 14.0.4 ..... Geting this error http://paste.ubuntu.com/23047781/	22:16
john_rambo	14.0.4	22:16
john_rambo	14.04	22:16
KeyboardNotFound	john_rambo: try "sudo apt update"	22:17
ivila	john_rambo: past your /etc/apt/sorces.list here as well	22:18
john_rambo	ivila: http://paste.ubuntu.com/23047788/	22:20
john_rambo	KeyboardNotFound: http://paste.ubuntu.com/23047785/	22:20
=== ddubson is now known as dubpies
mrnicegui	!q	22:23
ivila	john_rambo: can you comment (add a # at the beggining the following lines:	22:23
ivila	john_rambo: deb-src http://archive.ubuntu.com/ubuntu trusty-backports main restricted universe multiverse	22:24
ivila	john_rambo: deb-src http://archive.ubuntu.com/ubuntu trusty-security main restricted	22:24
ivila	and then run 'apt-get update'	22:24
KeyboardNotFound	ivila: doesn't this looks like malformed cache files stored in /var/lib/apt/lists ?	22:25
ivila	yep, the second paste you provided points that way	22:26
OerHeks	sudo rm -rf /var/lib/apt/lists and update again >> https://help.ubuntu.com/community/PackageManagerTroubleshootingProcedure	22:26
KeyboardNotFound	sudo rm -rf /var/lib/apt/lists/*	22:26
KeyboardNotFound	OerHeks: he doesn't have to delete the directory, just the files inside it	22:27
OerHeks	hmm indeed, that guide should be editted,	22:27
Ady_	i can not acces bleachbit from root. Everytime i try it says: The owner of /home/.../.config/ibus/bus is not root. But im the owner	22:27
OerHeks	but that pastebin is a part, not the whole updateoutput	22:28
Volund	Aaaaargh	22:29
KeyboardNotFound	john_rambo: take a look at this : https://askubuntu.com/questions/297757/why-after-fresh-ubuntu-12-04-installation-update-arent-being-installed	22:29
KeyboardNotFound	you have similar problems	22:29
Volund	I keep trying to install Ubuntu (or Kubuntu) and something weird happens. So I boot via UEFI to my USB, it brings up GRUB, I select 'Try Ubuntu' (or Kubuntu, etc) and all I get from there on is... a black screen.	22:30
Volund	booting with legacy mode instead of UEFI results in the same	22:30
Volund	I have an Oculus Rift plugged in, could that be causing it? O_o	22:30
KeyboardNotFound	Volund: do you get anything on oculus rift's screen ? :)	22:32
Volund	I did not look. because I only just thought about it	22:32
Volund	I know the media's good, it works in Virtualbox	22:32
KeyboardNotFound	Volund: after grub and loading some stuff, ubuntu starts the X server. Sometimes when I have connected my external monitor to my notebook I see picture on external monitor but doesn't see anything on notebook's monitor	22:33
Volund	hrrrrrm.	22:34
KeyboardNotFound	Volund: Do you see anything else after grub ? Or just a blank screen ?	22:34
Volund	just a blank screen after grub.	22:34
Volund	I do have multiple monitors plugged in but they aren't engagin--... hmmm	22:34
KeyboardNotFound	Volund: why don't you try with oculus rift detached ?	22:35
Volund	yeah I'll do that. unfortunately I've used all the spare time I had so it'll have to wait	22:36
ivila	Volund: Mayb pressing ESC helps, newer ubuntus hide the loading process while waiting to enable the graphics sometimes (Ithink)	22:36
Volund	ahaaaaaa. that will help	22:36
Volund	I want to see what it's doing yes, not these blank screens or splash screens	22:36
ivila	:9	22:36
ivila	:)	22:36
Ady_	i can not acces bleachbit from root. Everytime i try it says: The owner of /home/ariana/.config/ibus/bus is not root. But im the owner	22:36
ivila	Ady_: I don't know that software as it's not part of Ubuntu, but may you should run it as root?	22:37
KeyboardNotFound	Ady_: can you paste result from "ls -l /home..../bus " ?	22:38
Ady_	yes, this problem appear afteri update the system from ubuntu 14 to 16.04	22:38
Ady_	but i used to run it with out problem	22:38
KeyboardNotFound	Ady_: can you access it from your ariana user?	22:39
Ady_	no, i cant	22:40
KeyboardNotFound	Ady_: ok, paste the ls -l result	22:40
Ady_	do i pastbin the ls -l?	22:40
KeyboardNotFound	Ady_: because it's one line you can paste it directly	22:40
Ady_	total 2948 -rw------- 1 adriana adriana 197011 Mar 7 05:37 4.3 IFTF.odt -rw-rw-r-- 1 adriana adriana 14912 Feb 9 2015 apartados.docx -rw-rw-r-- 1 adriana adriana 25768 Jun 1 11:56 carta al director.pdf -rw-rw-r-- 1 adriana adriana 33211 Feb 3 2016 carta.odt -rw-rw-r-- 1 adriana adriana 24063 Nov 16 2015 chemicals .pdf -rw-rw-r-- 1 adriana adriana 19674 Nov 4 2015 Chlorophyll-a compny.odt -rw-rw-r-- 1 adriana	22:42
Ady_	like that?	22:42
KeyboardNotFound	Ady_: do you have to run the software as root ?	22:43
Ady_	i just needto free space, and i can do it with that software, but if i dont run it as root, i cant deleat somethings	22:43
Ady_	i dont know why now i can no, if i used to do it	22:44
KeyboardNotFound	Ady_: deleting files with root is dangerous	22:44
KeyboardNotFound	Ady_: you can break your linux system files	22:44
Ady_	but i can not access to anything as a root	22:45
df__	I can someone tell me why after lockscreen my mouse pointer disappear I have this issue since I am on Ubuntu x64, this doesn't happened on x32 bits	22:46
bekks	Ady_: Define "anything".	22:46
bekks	Ady_: And please use a pastebin.	22:46
ivila	df__: What's the point of having the mouse pointer on the lockscreen?	22:48
df__	ivila Mouse pointer disappear after suspend in Xubuntu.	22:49
ubuntu193	hello everyone!	22:49
glitchd	hi	22:50
ubuntu193	I seem to have the wrong ethernet driver installed could someone help me get the right one	22:50
ivila	df__: So is not ther either when unlocking the lockscreen?	22:50
ubuntu193	should i look for some number on my roater?	22:50
glitchd	no	22:50
Volund	I found probable answers for wht's going on. it's trying to set an impossible video setting or whatever. printed out instructions that should get me grooving	22:50
Crell	Good evening. I'm running into an issue with the nodejs package. I've installed nodejs, and npm, and installed a package via npm. That package, however, insists that there is no "node" executable available. Specifically, /usr/bin/env 'node' No such file.	22:50
* Volund will be glad to be off of Windows 10 ASAP...		22:50
glitchd	ubuntu193, it has nothing to do with your router and everything to do with your networking card	22:50
Crell	These are all installed via official packages/sources... why would it not be wiring up?	22:51
Volund	I've reached the end of my tolerances for Windows for a while	22:51
ubuntu193	ah network card	22:51
df__	ivila it disappear but I can use it I have to type alt F1 + alt F7 to see the pointer	22:51
ubuntu193	glitchd: where do i start?	22:51
Volund	and I /greatly/ enjoyed using Ubuntu some many months ago, but I switched back for Fallout 4...	22:51
glitchd	ubuntu193, are u on wifi right now?	22:51
df__	ivila this bug is confirmed https://bugs.launchpad.net/ubuntu/+bug/1573454	22:51
ubottu	Launchpad bug 1568604 in xserver-xorg-video-intel (Ubuntu Xenial) "duplicate for #1573454 Mouse cursor lost when unlocking with Intel graphics" [High,Confirmed]	22:51
ubuntu193	glitchd: ethernet	22:51
ivila	df__: ok, then I misunderstood the issue	22:51
ubuntu193	glitchd: 150mb internet only giving 1mb tops	22:51
glitchd	ubuntu193, hmm...i would check your ethernet cord	22:52
Crell	It looks like there is a nodejs executable, but not a "node".	22:52
ubuntu193	glitchd: on other devices 5-15mb	22:52
ubuntu193	glitchd: they are the same cord i use on the other devices	22:53
ubuntu193	glitchd: maybe i have the wrong one insalled for this card	22:54
ubuntu193	glitchd: Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)	22:55
glitchd	ubuntu193, i think if you had the wrong driver installed the device would not work at all	22:55
df__	ivila nothing to do ? or should I post on forum ?	22:55
ubuntu193	glitchd: oops	22:55
glitchd	which ubunut are u running?	22:55
ubuntu193	glitchd: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 05)	22:55
javashin	hello	22:56
javashin	helllllllllllllllllllllllll	22:56
ubuntu193	glitchd: it says gigabit but its a load of crap	22:56
ubuntu193	glitchd: i would honestly like to try a new controller	22:57
ubuntu193	glitchd: maybe one that is built for my 150mb or over one that is just built for 100mb	22:57
ubuntu193	glitchd: 12	22:58
glitchd	ubuntu193, 12 what?	22:59
ubuntu193	12.04	22:59
ubuntu193	glitchd: maybe this is the problem "Capabilities: <access denied>"	22:59
ubuntu193	glitchd thats under Ethernet controller shouldnt it says capabilities <100mb> ??	23:00
glitchd	ubuntu193, this is gonna sound silly, but try plugging the cord into another port on the router	23:03
ubuntu193	i will give this a go right now	23:03
glitchd	ubuntu193, just for the sake of knowing, why are you still on 12.04?	23:03
ubuntu193	glitchd: i use a vpn and other things so just give me about 5 minutes	23:03
ubuntu193	glitchd: keeping it classic ;)	23:04
ubuntu193	glitchd: plus 12 is my fav	23:04
glitchd	mmk	23:04
ubuntu193	brb	23:04
liuxg	does anyone know what it means "while [ ! -f "$mysqld_pid_file_path" -o ! -S "$mysql_socket_file_path" ]; do ...." I do not fully understand the "-o ! -S" part, thanks	23:06
bekks	"while not $a_valid_file or not -S ...	23:07
liuxg	bekks, what does "-S" mean in this context? thanks	23:07
bekks	"while not $a_valid_file or not $a_valid_socket" ...	23:09
ubuntu785	glitchd: same ol speeds 800 900 kbs only	23:10
bekks	liuxg: "man test" :)	23:10
glitchd	ubuntu785, ok, pm me	23:10
liuxg	bekks, thanks!	23:10
bekks	liuxg: you're welcome :)	23:10
ubuntu785	glitchd: could you pm me	23:11
ubuntu785	glitchd: i dont use irc oftan and dont know the command	23:11
glitchd	ubuntu785, why, just pm me	23:11
glitchd	ubuntu785, okok	23:11
bekks	liuxg: I'm wondering what the actua problem is, behind your question :)	23:11
liuxg	bekks, I want to understand the test conditions. there are two parts of it, I just want to remove the second test one for the socket. thanks for your help..	23:12
bekks	liuxg: and where is that snippet from?	23:12
=== jarvis is now known as jarvi5
liuxg	bekks, it is from this file https://github.com/kyrofa/owncloud-snap/blob/master/src/mysql/start_mysql I am now trying to configure a mysql database using IP instead of socket.	23:14
bekks	liuxg: And why are you investigating the start script then instead of configuring your mysql db for listening on an IP instead of socket?	23:15
bekks	liuxg: all you have to do is editing the my.cnf	23:15
bekks	liuxg: the pid file is completely not related to "listen on a socket" and "listen on an IP":	23:16
bekks	.	23:16
liuxg	bekks, so, that part of the irrelavant?	23:16
bekks	liuxg: sure. all you need to do is editing the my.cnf	23:16
liuxg	bekks, my my.cnf is http://paste.ubuntu.com/23047905/	23:18
milestone2341	failed to execute child process input/output error any ideas?	23:18
df__	Someone can tell me why I don't have my xorg.conf file and how to have it ?	23:18
bekks	liuxg: So it IS listening an an IP (127.0.0.1 port 3306) already.	23:19
Pici	df__: because a lot of modern xorg configuration comes from autodetection now. If you need to setup an xorg.conf to add some specific parameter, you can just create a file yourself and put the directives in it,	23:20
=== jarvis is now known as jarvi5
df__	Pici ok I guess you can confirm that because I have this graphic card : Intel Corporation Core Processor Integrated Graphics Controller (rev 02)	23:20
liuxg	bekks, according to the code, it saves the user and password to the root.ini file. somehow, it fails when creating the database at http://paste.ubuntu.com/23047909/	23:21
df__	?	23:21
Pici	df__: confirm what/	23:21
=== jarvis is now known as jarvi5
df__	Pici it's normal that I don't have this file with my grpahic card	23:21
bekks	liuxg: where is the "fail"?	23:21
Pici	df__: Its normal to not have that file at all.	23:21
df__	ok	23:21
Nirvash	Anyone ever seen "OEM", "Filesystem", and "EFI-SYSTEM" appear in the launcher?	23:21
liuxg	bekks, in the place where I just posted http://paste.ubuntu.com/23047909/ at the file https://github.com/kyrofa/owncloud-snap/blob/master/src/mysql/start_mysql	23:22
bekks	liuxg: did you verify mysql is up and running?	23:22
bekks	liuxg: you posted a mysql snippet, no fail to be seen there.	23:23
jarvi5	/msg NickServ register Jarv1S0 javicmado@gmail.com	23:24
df__	Pici An exempl of xorg.conf configured : http://pastebin.com/errCYifP how to find the informations to put ?	23:25
df__	for my computer ***	23:25
Pici	df__: you don't need to put anything.	23:25
Pici	like I said, xorg doesn't need that file to run.	23:25
liuxg	bekks, this is the log of the mysql, I think the service is up and running. when creating the database, I get error like 200, it could be 200x sth.	23:26
liuxg	bekks, http://paste.ubuntu.com/23047915/	23:27
bekks	liuxg: you think or you verified?	23:27
bekks	liuxg: your log indicate sthat mysql isnt running.	23:27
liuxg	bekks, in the log, I think it shows only part of the error due to the space of the screen.	23:28
bekks	liuxg: line 18.	23:29
df__	Pici reason why I'm trying to creat this file is because my Mouse pointer disappear after suspend in Xubuntu. https://bugs.launchpad.net/ubuntu/+bug/1573454 . Someone solve this problem by configuring this file.	23:29
ubottu	Launchpad bug 1568604 in xserver-xorg-video-intel (Ubuntu Xenial) "duplicate for #1573454 Mouse cursor lost when unlocking with Intel graphics" [High,Confirmed]	23:29
liuxg	bekks, yes,that is where the error happens. it tries to create the default database there.	23:29
bekks	liuxg: and it fails due to error 200. So did you verify your mysql instance starts up fine?	23:30
liuxg	bekks, this is a more complete log http://paste.ubuntu.com/23047925/	23:31
Pici	df__: I don't see anything on that page that references xorg.conf	23:32
df__	Pici not for this link but others on web. This link shows that the bug is reported	23:32
Pici	df__: well, like I said, you can just create a file and put it there and name it xorg.conf.	23:34
df__	Pici I have to write something in.	23:34
dhsoup	hi. last time i tried ubuntu, i could not get rid of constant screen tearing (in movies and when scrolling on pages). i want to try ubuntu again, but scared to death that it will be the same thing. what caused it and how can i avoid it?	23:35
Pici	df__: Are you asking me what you need to write in xorg.conf to fix your bug?	23:35
df__	Pici yes I don't know how to get informations. People write something in and this bug maybe fixed	23:36
Pici	df__: You need to ask those people. Theres no magic word that would fix this.	23:37
milestone2341	is there a command in linux like in windows that can run through ubuntu looking for file errors or major problems in the ubuntu os?	23:38
df__	Pici https://forum.ubuntu-fr.org/viewtopic.php?pid=1505226	23:38
milestone2341	is that supposed to be for me?	23:39
Vy7au7as	Hello guys, can you help me, how to solve this wifi disconnecting problem?: http://bit.ly/wifi_problem	23:41
cosmicfires	I don't remember who helped me with bind and resolv.conf a few days ago I have follow up info	23:42
cosmicfires	changes to /etc/resolvconf/resolv.conf.d/base don't get copied to	23:42
cosmicfires	changes to /etc/resolvconf/resolv.conf.d/head get copied to	23:42
cosmicfires	copied to /etc/resolve.conf	23:42
cosmicfires	everything is happy now	23:43
bekks	liuxg: line 42. you have an issue with your mysql instance.	23:43
FireBeyond	Have created a LVM VG, and want to create a thin pool on it. I want to specify an LV Path, I do "lvcreate -l 95%VG -T -ndockerpool docker-vg" but it's not set, unlike the LVs created by the 16.04 installer, any way to do that?	23:44
liuxg	bekks, thanks for helping. I am now having the problem when I try to access mysql database, it complains like "http://paste.ubuntu.com/23047939/, it seems that it still uses the socket way to do that instead of using IP	23:46
liuxg	bekks, my code is at https://github.com/liu-xiao-guo/tomcat-maven-webapp	23:47
liuxg	bekks, the question is that how I can force it to use IP instead of socket, thanks	23:48
dancingd3mon	hey guys, what is the right configuration in vsftpd conf to make fxp work ?	23:52
=== seyeongkim_ is now known as seyeongkim
dancingd3mon	im in ubuntu 16 connecting to ftp with ssl and those are my config	23:53
dancingd3mon	ssl_ciphers=HIGH	23:53
dancingd3mon	pasv_enable=YES	23:53
dancingd3mon	pasv_promiscuous=YES	23:53
dancingd3mon	port_promiscuous=YES	23:53
dancingd3mon	pasv_min_port=5757	23:53
=== bitch is now known as \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!