[02:23] Bug #1623751 opened: [2.1] MAAS takes a long time to save settings [02:23] Bug #1623752 opened: [2.1] Settings page still lists 'Boot Images' section [02:32] Bug #1623753 opened: [2.1] New images page doesn't have option to enable/disable automatic image sync [03:23] Bug #1623760 opened: [2.1] If Region and Rack controller are in the same machine, NTP service tracker is listed under rack === frankban|afk is now known as frankban [06:40] Hi All, MAAS for auto pilot, do the MAAS node itself is part of the 5 nodes? does it's node should be commissioned in it's dashboard? [06:49] Hi guys! [06:49] Sorry to interrupt :) [06:49] Just posted this on answers ... http://askubuntu.com/questions/825095/does-maas-have-an-event-queue-that-i-can-listen-to [06:49] oh [06:49] its ask :)) [06:59] Is the MAAS node itself sould be listed and commissioned? === Guest45771 is now known as CyberJacob [09:15] Bug #1623851 opened: Tables not responsive for mobile [09:15] Bug #1623852 opened: The page header is not responsive for small screen width and mobile screens [09:27] Bug #1623851 changed: Tables not responsive for mobile [09:27] Bug #1623852 changed: The page header is not responsive for small screen width and mobile screens [09:36] Bug #1623851 opened: Tables not responsive for mobile [09:36] Bug #1623852 opened: The page header is not responsive for small screen width and mobile screens [10:39] Bug #1623878 opened: mDNS label contains disallowed characters [12:24] roaksoax: Hi. Now we only have the issue is : MAAS not able to detect node disks. MAAS changing nodes state from commissioning to Ready. Nodes power state is "ON". https://imagebin.ca/v/2v9uPsoTQ6Pi [13:03] roaksoax: Could you please provide me some solution for this. [13:06] rock: the machine after commissioning will be market ready [13:06] rock: and you need to wait for maas to update the power [13:06] rock: if there are no disks discovered [13:06] rock: change the disks to IDE or VirtIO or something similar [13:06] rock: and re-commission [13:07] Hi All, MAAS for auto pilot, do the MAAS node itself is part of the 5 nodes? does it's node should be commissioned in it's dashboard? [13:09] Bug #1621901 opened: lacks support for ipv6 addresses [13:10] roaksoax: Hi. I tried with IDE. It is not worked. I will try with VirtIO and Other. Thank you. [13:10] nirlevy: Hi. MAAS node is itself is part of the 5 nodes. [13:13] nirlevy: If you take 5 nodes, One node is for MAAS, One is for Landscape and remaining three nodes are for Openstack deployment through Autopilot. [13:13] nirlevy: you need to commission 4 nodes except MAAS node. [13:16] Thank you rock, so I will remove it from it's state "new" in the nodes. [13:17] Does Maas have an event system? http://askubuntu.com/questions/825095/does-maas-have-an-event-queue-that-i-can-listen-to [13:19] Some interface I can connect to and get a notification when the commissioning or deployment is finished for a machine? [13:43] anyone knows where to find any help whit openstack-install in single mode? [13:48] rock: fwiw, my VM's are configured with VirtIO [13:50] roaksoax: Thank you . I am trying with 'VirtIO'. Commissioning in Progress [13:56] Is there a mechanism to pass a script to maas to be run on the first boot of a node? Something similar to AWS's user_data scripts? [13:57] All I can seem to find are "Comissioning Scripts", which don't seem appropriate. [14:03] evidex: user_data [14:03] evidex: check the API on 'start or deploy' [15:10] Hello! I've tired to install maas from stable repo - I can connect to the mass' UI, but I see there is no configured controller. I see the following error in the rackd.log: http://paste.openstack.org/show/577464/. How can I configure a controller there? [15:24] Bug #1623994 opened: [2.1] When trying to enable DHCP - Name or service not known [15:55] roaksoax: Hi. For one node I given VirtIO disks, for second node I gave SCSI disks. Then MAAS detected hard disks. And also I tried with "VirtIO SCSI disk", "IDE" and "SATA" and "USB". These disk types not detected by MAAS. [15:58] roaksoax: we first added Chasis and then started commissioning of all nodes. All nodes are not commissioning successfully ata a time. Some nodes are failing with Error: node marking failed , operation commission failed after time out 0:20:00. [15:58] roaksaox: When we try to recommission the failed nodes again and again then they commissioning successfully. [15:59] roaksoax: Do you face the same issue while commissioning nodes in your setup. [16:01] roaksoax: In maas.log file, I saw the following error repeatedly. ISSUE : maas-server maas.lease_upload_service: [ERROR] Failed to upload leases: 'str' object has no attribute 'mac' [16:02] roaksoax: Why we are getting this error repeatedly. Do you have any idea? Is this error will effect the commissioning process? [16:05] roaksoax: maas.log : http://paste.openstack.org/show/577660/ [17:00] Bug #1624035 opened: [2.1] Missing support for icons inside input fields [18:19] my first time here, so please excuse [18:19] having trouble enlisting nodes to maas === frankban is now known as frankban|afk [18:36] okinWhitePlains, what kind of nodes? [18:36] and which version of maas? [18:38] MAAS Version 1.9.4+bzr4592-0ubuntu1 (trusty1) [18:38] I have 5 Dell R610 for the nodes [18:39] ah ok. whats the issue? do they pxe boot? [18:40] yes, they get an IP and boot then get stuck at meta data source [18:43] the boot completes but the node stays powered up and does not appear in maas [18:45] okinWhitePlains, any chance you can provide the last lines(s) shown on the nodes? [18:49] at the point it gets stuck I see the following: url-helper.py Calling http://169.254.169.254/2009-04-04/meta-data/instance-id failed [150/120s] [18:50] request error .. urllib3.connectionpool.HTTPConnectionPool object ... connection timed out === John__ is now known as johncrist [18:51] o/ Good morning/afternoon/evening all [18:52] hello [18:52] okinWhitePlains, it's likely the node can't talk to the controller then [18:52] How do you guys prefer a question be asked? Just thrown out there? Wait for someone to open up? [18:52] I don't want to inconvenience or cut in on anyone [18:54] it's able to get the image to boot. What config should I look at? [18:57] johncrist, throw it out there [18:58] So I've set up a little test bed in my office: http://i.imgur.com/DGmWkDA.jpg [18:59] Per the documentation I've 5 systems with 2 hard drives, two of which have two nics: http://i.imgur.com/AtYv7D7.jpg [18:59] The top server is my region controller and the second is my rack controller [19:01] I have a line feeding into the top switch (orange) that's my live 'internet' connection. The blue switch I have the region and rack controller plugged into. The second nic on the region controller isn't doing anything (the docs didn't specify so far as I saw). The rack controller is also plugged into the blue switch and I can see the rack controller in the web interface: http://i.imgur.com/Aesk3sK.jpg [19:01] The lower switch is plugged into the second nic on the rack controller and currently has one node plugged into it as well. [19:02] In my mind I feel like the second nic on the rack controller should have a switch with the rack controllers plugged into it, and then each rack controller having it's own switch for the nodes, but I may be wrong about that. In either case that's how I'm currently set up. [19:02] What I'm seeing is that the second interface on the rack controller is unconfigured, and I'm unsure of how to 'configure' it in the web interface [19:03] okinWhitePlains, you're sure the http port is open on the server? [19:03] I've assigned it a fabric, set a subnet on the fabric, and enabled DHCP [19:04] I'm sure it's open. I can retrieve packages and install updates [19:04] http://i.imgur.com/i91TVYl.png [19:11] Did we break him? [19:15] o/ userland [19:15] I'm seeing an interesting error adding a 2nd rack controller: https://paste.ubuntu.com/23183345/ [19:16] hello I see on maas website that there is possible to use ansi ble with maas [19:16] where can I read some docs about it? It's tricky to find :) [19:18] That's an excellent question. I'm here for help, too, so I'm not sure I have an answer for you :P [19:19] lol i hope you are joking :P [19:20] and you have an a great answer 8) [19:27] Can anyone check if http://169.254.169.154 is up or I'm being blocked from getting to it [19:27] It the datasource site for metadata [19:28] 169.254.169.254 is run localy on your env its not routable [19:29] Was gonna say [19:30] Hey userland -- ever run into a situation where a rack has an interface that you just can't configure? [19:30] Like you set up the subnet and vlan and enable DHCP, but the interface just remains unconfigured? [19:31] well I'm using maas from yesterday but I've runned it standalone and in lxc. Everytime you need to make proper interface configuration before you will start working with rack [19:32] mass everytime discovered my interfaces properly but they should be ok after ifup them [19:34] I'm wondering if MaaS discovers things upon install only [19:36] perhaph rack restart will help - you lose nothing [19:36] how do I check if 169.254.169.254 is running? [19:37] just try telnet it on port 80 [19:37] curl will also work [19:38] That address is a local only net though [19:38] You only see it when nothing gets assigned [19:38] if not then restart your metadata server or check network connectivity. On Openstack you neet to have a router and gateway from your network. Other wise you will not be able to connect to metadataserver [19:43] I only have maas up. Openstack will come later, if I survive. So in maas, where to find the config for the metadataserver [19:45] you do not need it [19:45] tell what you are trying to do ATM [19:47] my nodes and not enlisting in maas [19:51] and you see errors about 169.254.169.254 on your nodes console? [19:54] * nturner realized the new rack controller was running 2.0 and the region controller running 2.1 alpha [19:55] after updating so they match, I see https://paste.ubuntu.com/23183485/ [19:57] that's right [19:57] url-helper.py Calling http://169.254.169.254/2009-04-04/meta-data/instance-id failed [150/120s] [19:58] request error .. urllib3.connectionpool.HTTPConnectionPool object ... connection timed out [20:13] Folks, excuse me, can someone help me with my problem, what I've described earlier? [20:14] Bug #1623266 changed: [web UI] Proxy is for APT only [20:18] someone was asking about new interfaces [20:18] I added to my maas VM new interface [20:18] resterted the maas and it see my new virtual interface with its network [20:18] guess I was right [20:36] userland, I wrote about a problem with controller. [20:37] userland, I can't connect it to my maas instance and the following errors in logs: http://paste.openstack.org/show/577464/. [20:38] I don't know if maas is using rpc [20:38] but usually no rpc endpoint is because portmap is not working [20:39] dunno if it will help [20:43] userland, it worked yesterday on the same OS on another VM. [20:44] I tried to install it on a baremetal server today, but it doesn't work. [20:44] I can't figure out why it's happened. [20:44] the same error? [20:45] userland, yes. [20:46] I've tired to install it on KVM's VM and bare metal today. It doesn't work. [20:46] im trying to run 2.0 via 16.04 on bare metal atm [20:46] But it works on the VM, what created in virtualbox. [20:46] tftp doesn't work [20:53] my tftp started to work. removed all boot images re-imported them [20:53] I was asking for support to ansible but no one helped me too. Do you have full log for your BM? [20:54] what was haooening before this error showd [21:01] userland, maas writes in the log, that it starts some servers on 69 port. [21:02] userland, I'll try install it in VirtualBox again. [21:16] 69 is tftp port [21:19] userland, yup, I know. === mup_ is now known as mup [21:53] Bug #1624118 opened: Primary DNS entry for a node ends up using wrong address [23:14] Good day all! Anyone has a comment on this question? http://askubuntu.com/questions/825095/does-maas-have-an-event-queue-that-i-can-listen-to [23:26] Bug #1624154 opened: Rack unable to import files from region