[04:17] <Sircle> I plugged nvs quadro 420 and 450 http://www.nvidia.com/object/product_quadro_nvs_420_us.html and http://www.nvidia.com/object/product_quadro_nvs_450_us.html and I saw only 2 out of 4 LCDs were shown as connected in xrandr -q. Other 2 as disconneced. I plugged that on an other machine having windows, I got all 4 working. A) any clues why? B) whats the minimum most costly card with 3-4 display at a
[04:17] <Sircle> time (for multiseat) is 100% supported by ubuntu?
[04:40] <basilAB> I have a trusty host (14.04.5 with 3.13.0-100-generic kernel) and trying to do a 'apt-get dist-upgrade'. But it is not picking the latest kernel '4.4.0-45.66~14.04.1' even though it is available in the repo.
[07:36] <sonu_nk> Hi i am new to Ubuntu.. if i have plain cloud ubuntu .. then we need to run a domain on that.. for this we need to setup a host ?
[11:12] <puR0> hi all
[11:24] <linux_g10> hey
[12:46] <jgknight> Does anyone have any experience with storing/saving vrf & route table config on Ubuntu? my current problem is once I reboot, it all goes away. Not sure where the best place to put it is, I'm assuming in /etc/network/interfaces
[12:46] <jgknight> referring to this type of setup https://www.kernel.org/doc/Documentation/networking/vrf.txt
[12:47] <jgknight> seems like they create a vrf.conf and reference that somewhere. at that point i might as well just write a bash script that redoes all of my commands.. :/
[13:22] <Pinkamena_D> I have logged onto many other companies servers which allow logging in with SSH using active directory credentials. I would like to set this up myself with ubuntu server 14.04 and a windows server 2012 active directory controller. What is the name of the technology or software that I would look into to accomplish this?
[14:00] <cpaelzer> Pinkamena_D: you likely look for samba/kerberos/pam as the top level tech to be used
[14:01] <cpaelzer> Pinkamena_D: start maybe here https://help.ubuntu.com/lts/serverguide/sssd-ad.html#sssd-ad-kerberos https://help.ubuntu.com/community/ADAuthentication https://help.ubuntu.com/community/ActiveDirectoryWinbindHowto
[14:11] <rattking> Hello folk, does anyone know what the status of CVE-2016-1247 for precise is?  ~ubuntu-security still says needed
[14:11] <rattking> *folks
[14:11] <rbasak> https://people.canonical.com/~ubuntu-security/cve/2016/CVE-2016-1247.html
[14:12] <rattking> so needed :)
[14:13] <rbasak> That's as much status as the server team has access to. You could try asking the security team in #ubuntu-hardened for more.
[14:13] <rattking> ok thanks for the info
[14:24] <Pinkamena_D> cpaelzer: trying to set up SSSD, I can do the search with $ ldapsearch successfully but specifying ldap_default_bind_dn and ldap_default_authtok the same in sssd.conf yields "invalid credentials" in the debug log.
[14:33] <cpaelzer> Pinkamena_D: sorry I stay away from ADS since 2001, but hopefully someone else can help you with experience on that
[14:33] <Pinkamena_D> cpaelzer: OK, sorry to specify your name in the reply.
[14:34] <cpaelzer> Pinkamena_D: no reason to excuse at all - just wanted to explain instead of dropping dead on the chan :-)
[14:37] <theGoat> i have updated one of my ubuntu boxes to 16.04.  now i can't mount dmg files from my mac.  all i see in the kernel logs is lockd: cannot monitor <client>  not sure if i need to make changes on one of the sides.  client side is OS X 10.11
[16:58] <ameurux> gooday
[16:59] <ameurux> anyone installed samba on 16.10?
[17:01] <ameurux> hello
[17:08] <theGoat> i am an all nfs shop, sorry
[17:09] <ameurux> hello
[17:09] <ameurux> anyone here?
[17:13] <theGoat> you may want to try #ubuntu
[17:13] <ameurux> yeah
[17:14] <ameurux> but people I found are not that good
[17:14] <ameurux> just like forums
[17:14] <theGoat> what is your question?  it's been a while since i have touched samba
[17:15] <ameurux> on any ubuntu 16.10   I think samba is broken
[17:15] <theGoat> what's it doing?
[17:15] <ameurux> hold on a sec I paste
[17:18] <ameurux> http://paste.ubuntu.com/23383642/
[17:21] <theGoat> unfortunately i am not versed in systemd.  i was having an nfs issue today, and reverting back to upstart solved my issue.
[17:21] <theGoat> nmbd: No local IPv4 non-loopback interfaces available, waiting for interface ..."
[17:22] <theGoat> what's ifconfig say
[17:22] <ameurux> ok
[17:22] <ameurux> just a min
[17:22] <theGoat> http://linuxadmin.melberi.com/2015/04/nmbd-no-local-ipv4-non-loopback.html
[17:24] <ameurux> http://paste.ubuntu.com/23384523/
[17:25] <theGoat> check your samba conf make sure the eno1 and lo interfaces are specified.
[17:26] <ameurux> ok I will
[17:57] <ameurux> theGoat   hello you there?
[17:57] <theGoat> hey what's up
[17:57] <ameurux> thank you Sir
[17:57] <ameurux> the problem is
[17:57] <theGoat> so it's workingnow?
[17:57] <ameurux> I have 3g dongle
[17:58] <theGoat> ok?
[17:58] <ameurux> when I disconnect it and use LAN with IPV4, the install went fine
[17:58] <ameurux> yes it worked
[17:58] <theGoat> ah ok
[17:58] <ameurux> than you again
[17:58] <theGoat> not a problem
[19:15] <brandor5> Hello everyone: I'm trying to use autopilot to install openstack... after pluggin in my maas info and hitting continue i get the following error: "error: flag provided but not defined: --up-tools"
[19:15] <brandor5> anyone have any ideas whats going on?
[19:30] <brandor5> anyone?
[19:31] <Pici> brandor5: you may have better luck asking in #openstack
[19:31] <brandor5> Pici: ok, thanks :)
[20:11] <CodeMouse92> Any recommendations for a cPanel alternative on Ubuntu 16.04?
[22:37] <LeMike> hello. would this be the right place to discuss a cluster? I have a website, that is meant for multiple countries within europe. I would say one server and multiple domains is enough for seo/google etc. But the website has performance issues, so I need more power there. I could install another server located in france while the master is somewhere else. What about the mirror then? And the sql slave?
[22:37] <LeMike> How slow will they be?
[22:37] <LeMike> damn this is a huge topic for me
[22:55] <RoyK> LeMike: depends on the type of server - if it's just static stuff, multiple dns entries should do, but they won't be able to share dyamic content. if it's a single site thing, use a proxy like varnish and a common database beween them
[22:56] <RoyK> LeMike: scalability has a ton of variables
[23:04] <LeMike> yee, thanks RoyK . It is a Magento system and by now I think one server in the US and one in europe (worst I can imagine, what the customer wants) is really a bad thing. I think I want it like this: .com goes to server 1, .org goes to server 2. both are failover for each another. Now I need a scenario for the sql part.
[23:06] <LeMike> I would like to cluster it by table names because it has prefixes for the .com site and another prefix for the .org site. Would this be good? I would love to have something like master-slave but lower the latency between those two, RoyK .
[23:06] <LeMike> My fear is that such logic wont help because the master is always asked which db-server shall be used :/ or isn't it like that?
[23:13] <station> is it reliable long term to runn the OS from an usb 3 stick???
[23:15] <station> im not shoure but im remember something like there is some flash mem type I have to look for
[23:28] <LeMike> hm. on the other hand I wonder if two thin nginx proxy would do the trick. load balacing between two servers with a classic master-slave config... this sounds better