[00:00] <OerHeks> configuration: driver=i915, driver loaded.
[00:00] <Bashing-om> R13ose: Not makong a lot of sense as we have " Kernel driver in use: i915 " but the log says " 53.127] (II) modeset(0): [DRI2]   DRI driver: i965 " . Still reading and looking .
[00:01] <Bashing-om> making*
[00:02] <R13ose> Bashing-om: thanks
[00:04] <Bashing-om> R13ose: Humm maube a problem here ? " 53.248] (II) modeset(0): Damage tracking initialized" // Lemme have the time to look at the log again .
[00:05] <R13ose> okay
[00:07] <v3qa> hi all
[00:07] <v3qa> greetings from turkey
[00:07] <v3qa> im new at linux ubuntu
[00:08] <v3qa> for now im installing gnome 3 using gnote call on terminal
[00:10] <Bashing-om> R13ose: A postive response ' /usr/lib/x86_64-linux-gnu/xorg/extra-modules ' ? and show ' ls -al /usr/lib/xorg/modules/drivers ' please .
[00:12] <R13ose> Bashing-om: bash: /usr/lib/x86_64-linux-gnu/xorg/extra-modules: Is a directory
[00:12] <R13ose> Bashing-om: http://pastebin.com/bjWxd6pC
[00:16] <Bashing-om> R13ose: ouch .. Do not know what to kame of that ad on my 14.04 system " sysop@1404mini:~$ ls -al /usr/lib/x86_64-linux-gnu/xorg/extra-modules >> lrwxrwxrwx 1 root root 53 May 19  2013 /usr/lib/x86_64-linux-gnu/xorg/extra-modules -> /etc/alternatives/x86_64-linux-gnu_xorg_extra_modules " is a symlink to the actual executable .
[00:18] <R13ose> Bashing-om: I believe everything is exactly the same for me as you show.
[00:19] <Bashing-om> R13ose: Hybrid graphics ? As we have the AMDgpu driver " amdgpu_drv.so " available ?? What returns ' lspci -vnn | grep VGA -A 12 " ?
[00:20] <R13ose> Bashing-om: http://pastebin.com/uxwmaCDy
[00:27] <Bashing-om> !info xserver-xorg-video-intel
[00:27] <R13ose> and?
[00:28] <observation192_> Can a linux get viruses.
[00:29] <R13ose> Bashing-om: I see that but what is the next step?
[00:29] <am_> hi all
[00:29] <Bashing-om> R13ose: Do not know what to think, yet . As I expect to see 'Intel" and we see " 47.652] (==) Matched fbdev as autoconfigured driver 1 " . still considering .
[00:30] <R13ose> thanks
[00:30] <am_> what is the command line to update the grub after reinstallation on debian?
[00:31] <observation192_> am_: update-grub
[00:31] <observation192_> as r0Ot
[00:36] <Bashing-om> R13ose: Right now I am at a stop. we have " 46.555] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied " and perhaps this is encryption related ???
[00:37] <R13ose> Bashing-om: maybe not using sudo
[00:38] <R13ose> Bashing-om: maybe I can do some work and come back?
[00:39] <Bashing-om> R13ose: Sure, we do this at your pace .
[00:41] <Bashing-om> !virus | observation192_
[00:54] <Bashing-om> daftykins: I had the thought too of hybrid graphics .. but - lspci -vnn | grep VGA -A 12 -> http://pastebin.com/uxwmaCDy says this is Intel only .
[00:56] <FireStriker> hey
[00:58] <FireStriker> how do you install skype?
[01:01] <R13ose> Bashing-om: back
[01:05] <Spookan> FireStriker: My first hit on Google. https://help.ubuntu.com/community/Skype
[01:05] <FireStriker> thanks
[01:06] <FireStriker> need to goolge things lol
[01:08] <R13ose> Bashing-om: still around?
[01:10] <dyre17> How do I submit a bug ticket for ubuntu? I just found (what I feel is) a huge vulnerability in mariadb
[01:12] <FireStriker> Spookan: hey how do i tell if the repo added successfully
[01:13] <Spookan> FireStriker: You install Skype?
[01:14] <FireStriker> ok i just want to know if the repo added successfully before i try to install skype
[01:14] <FireStriker> i bugged it up before
[01:14] <Bashing-om> R13ose: Yeah, still here - was off discussing your issiu in an alternate channel .
[01:15] <R13ose> Bashing-om: thanks.
[01:16] <Kramerboy> Hello, I have an NTFS partition with the read-only attrib set via DiskPart. However, in Ubuntu it gets mounted with read-write. Would it still be safe to transfer files to it via Ubuntu, despite the DiskPart attrib?
[01:17] <Bashing-om> R13ose: Is this a encryption thingy ? What results booting a liveDVD(USB) ?
[01:18] <R13ose> Bashing-om: I don't know if this is an encryption thingy.  I don't want to restart if possible.
[01:21] <Bashing-om> R13ose: Presntly, we are all stumped with this . A race condition unlocking the desktop ?? .. we just do not have enough info to make any call . lshw clearly shows the i915 driver as loaded ( at some point ) .
[01:23] <FireStriker> can you move the dock?
[01:27] <Rarrikins> When is 16.04.2 coming out?
[01:30] <R13ose> Bashing-om: do you want access to my computer to get more info?
[01:31] <Bashing-om> Rarrikins: Feb 2017 per: https://wiki.ubuntu.com/Kernel/LTSEnablementStack .
[01:31] <Rarrikins> Thanks
[01:33] <Bashing-om> R13ose: No .. Do not have those tools installed on this work build . And I would find nothing that you can not provide as we find the need to explore the situation . As is now .. I do not know how to proceed .
[01:33] <BlakeEvan> Go Cubs Go!
[01:34] <R13ose> Bashing-om: no worries.  What was the other chaannel you were asking in?
[01:35] <Bashing-om> R13ose: many if us frequent #ubuntu-discuss to talk over a matter so that this channel is not overly polluted .
[01:36] <R13ose> Bashing-om: would it be good to join that?
[01:36] <Bashing-om> R13ose: Well .. you may ... But as I say we are all stumped presently .
[01:37] <R13ose> well most voices are better then one :D
[01:37] <R13ose> Bashing-om: you can intro me
[01:37] <narupo> hi all
[01:37] <Bashing-om> R13ose: True, the "most voices" are here in this channel .
[01:38] <Kramerboy> Hello, I have an NTFS partition with the read-only flag set via DiskPart. However in Ubuntu, it gets mounted with write access. Is it still safe to transfer files to that partition despite the DiskPart flag?
[01:40] <narupo> Ubuntu has Hentai-Game?
[01:41] <narupo> Why linux destribution has not a game for the gentlemen?
[01:42] <narupo> I am a gentlemen, and sad.
[01:49] <drjam> erm.... uh.... lol?
[01:50] <narupo> hi?
[01:51] <RatchetTheGamer> Hey
[01:52] <narupo> hey guys
[01:52] <Kramerboy> hello
[01:52] <drjam> mooo
[01:52] <Kramerboy> does anyone here know much about NTFS on linux?
[01:52] <FireStriker> hey guys how do i run a .run file?
[01:52] <narupo> mouuuu
[01:53] <narupo> chmod +x file.run && ./file.run
[01:53] <narupo> maybe
[01:53] <narupo> less file.run
[01:54] <narupo> This .run file is safety?
[01:54] <FireStriker> is the file safe?
[01:54] <FireStriker> yea
[01:54] <narupo> safe? chmod +x file.run && ./file.run
[01:55] <FireStriker> its on a ubuntu page, a few ubuntu fourms and doomworld
[01:55] <narupo> please .run file to me?
[01:55] <Kramerboy> ah, a Doom source port?
[01:55] <FireStriker> doom3
[01:55] <narupo> game
[01:56] <protn> hi folks
[01:56] <protn> I got iso file 3.2gb whats the best tool to extract files from it?
[01:57] <protn> iso master sees readme file only
[01:57] <FireStriker> so the command will be "chmod +x doom3-linux-1.3.1.1304.x86.run && ./doom3-linux-1.3.1.1304.x86.run"
[01:58] <narupo> FireStriker: how?
[01:59] <FireStriker> ? you said the command is "chmod +x file.run && ./file.run" do i type file or name of file?
[01:59] <akik> protn: try mounting it as -t udf
[02:00] <narupo> FireStriker: chmod +x doom3-linux-1.3.1.1304.x86.run && sudo ./doom3-linux-1.3.1.1304.x86.run
[02:00] <narupo> will be install.
[02:01] <narupo> maybe
[02:01] <FireStriker> so put the whole thing in the terminale
[02:01] <narupo> yes
[02:01] <narupo> this is a command line on terminal.
[02:02] <narupo> You should launch terminal.
[02:02] <Kramerboy> Ctrl-Alt-T for terminal
[02:02] <FireStriker> ./doom3-linux-1.3.1.1304.x86.run
[02:02] <FireStriker> chmod: cannot access 'doom3-linux-1.3.1.1304.x86.run': No such file or directory
[02:02] <narupo> ok.
[02:02] <narupo> you try it 'pwd'
[02:03] <FireStriker> its on the desktop btw
[02:03] <narupo> you should be move to directory.
[02:03] <drjam> good fricking gravey that all sounds too hard for me
[02:03] <narupo> FireStriker: with a command 'cd'.
[02:03] <drjam> am a HUGE fan of "double-clicking make workey"
[02:03] <FireStriker> ok cd to where?
[02:03] <Kramerboy> change to desktop folder 'cd Desktop'
[02:03] <Kramerboy> nvm
[02:03] <narupo> FireStriker: Kramerboy
[02:04] <narupo> FireStriker: cd to download file directory.
[02:04] <FireStriker> ok
[02:04] <protn> akik: i mounted it
[02:04] <narupo> FireStriker: and 'ls'. You can see file name?
[02:04] <protn> yet to open with acetone
[02:05] <havoc_hive> hello
[02:05] <FireStriker> ok ls the download folder
[02:05] <narupo> FireStriker: ok
[02:05] <narupo> FireStriker: chmod +x file.run
[02:05] <FireStriker> yep its there
[02:05] <narupo> FireStriker: sudo ./file.run
[02:06] <protn> akik: it can open read me that says This disc contains a "UDF" file system and requires an operating system
[02:06] <protn> that supports the ISO-13346 "UDF" file system specification.
[02:06] <protn> I used sudo mount -t auto -o loop "/home/alex/Downloads/7/_Getintopc.com_7.iso" /$path_to_somwhere/
[02:06] <protn> :D
[02:06] <narupo> FireStriker: Maybe, launch install wizard of game.
[02:07] <protocol_hive> hello
[02:07] <narupo> FireStriker: how?
[02:08] <FireStriker> ok got it open
[02:08] <narupo> :D
[02:08] <narupo> congrats
[02:08] <protn> guys any ideas how to crack that iso?
[02:08] <protn> :D
[02:09] <protn> I kinda need it
[02:10] <protn> ok I can do it :D
[02:11] <FireStriker> ok where shoud i have it install i need to add the pk4's aftter this and some how i broke my lubuntu install with the mv command just erroring
[02:12] <FireStriker> the defult is /usr/local/games/doom3
[02:13] <FireStriker> should i keep it there
[02:13] <cash> How do I submit a synclient guide for touchpad configuration?  There is no official documentation regarding hardcoded settings that can be disabled by setting gsettings.mouse to false
[02:13] <narupo> mv command has error?
[02:14] <narupo> oops. ignore me.
[02:14] <FireStriker> thats alright
[02:14] <narupo> alright?
[02:14] <FireStriker> opps. ingnore me
[02:15] <narupo> lol
[02:15] <FireStriker> ignore*
[02:15] <narupo> oh
[02:15] <protn> workds
[02:15] <protn> :D
[02:15] <narupo> good luck. I go to the bed.
[02:15] <FireStriker> ok see you
[02:16] <narupo> see you
[02:16]  * procyon zonks out
[02:16] <procyon> whoops wrong channel. Look before you type, kids
[02:16] <FireStriker> lol
[02:17] <protn> who here makes money?
[02:17] <protn> press M
[02:18] <moneymaker> :D
[02:19] <FireStriker> ok i now just need to copy the pk4's ok can someone help me with moving files to /usr/local/games/doom3/base
[02:20] <FireStriker> ok i ment someone not a person call someone lol nice name btw
[02:24] <yuken> I'd like to resize /dev/sda, which is also where Ubuntu happens to be installed. Is this possible?
[02:25] <yuken> I have no live media or media to boot off of, or other disks.
[02:27] <moneymaker> any good iso maker?
[02:28] <moneymaker> https://verelox.com/docs/article/installing-microsoft-windows-server-on-a-cloud-server
[02:28] <moneymaker> :D
[02:28] <moneymaker> imgburn works but its not on linux
[02:34] <FireStriker> hey guys i need a bit of help moving files
[02:39] <kicksled> FireStriker: whats the issue?
[02:39] <FireStriker> i
[02:40] <FireStriker> dont know how lol, i am tryung to move a few files from a folder on the desktop to /usr/local/games/doom3/base
[02:43] <kicksled> move the files as superuser, open a terminal and sudo mv <files to move> /path/you/want/them
[02:44] <Giant> hello. anyone familiar with OMRON motion controller??
[02:45] <Giant> Specifically. MCH modules?
[02:45] <FireStriker> ok so the command will be "sudo mv pak000.pk4 /usr/local/games/doom3/base" ?
[02:45] <FireStriker> if the file to move is pk000.pk and the parth i want to move it is /usr/local/games/doom3/base
[02:46] <FireStriker> i bugged something upo the last time i try to do this
[02:47] <kicksled> FireStriker: yeah, if you are in the directory where the file is located. else "sudo mv /path/to/pak000.pk4 /usr/local/games/doom3/base"
[02:47] <kostkon> FireStriker, since you need to run the mv command as superuser make sure you don't mistype the paths because you might mess up your installation by doing so
[02:47] <FireStriker> ok ik how it feels i got locked out and it kida crased when i try to log in, it just keept bring a black scren and the logon screen returned
[02:47] <havoc_hive> allo
[02:48] <protocol> hello
[02:49] <FireStriker> hi protocol
[02:49] <protocol> FireStriker: how are things?
[02:50] <FireStriker> good broke lubuntu, uninstalled lubuntu, fixed mbr, installed ubuntu, now installing doom 3
[02:50] <FireStriker> and i hope it works this time lol
[02:50] <qubit> hello
[02:50] <FireStriker> how are you portocol
[02:51] <Guest41036> i am not guest41036 aperntly
[02:51] <Guest41036> lol now
[02:51] <protocol_> how is everyone
[02:51] <Guest41036> okay .-.
[02:51] <FireStriker> good?
[02:52] <FireStriker> protocol? is that you? 3 protocols lol
[02:52] <Guest41036> could anyone perhaps help me with a steam install error
[02:53] <xxxxxxxxxcsadfas> well then
[02:54] <kostkon> !details
[02:54] <xxxxxxxxxcsadfas> one moment
[02:54] <xxxxxxxxxcsadfas> ill paste the error
[02:55] <xxxxxxxxxcsadfas> Running Steam on ubuntu 16.04 64-bit
[02:55] <xxxxxxxxxcsadfas> STEAM_RUNTIME is enabled automatically
[02:55] <xxxxxxxxxcsadfas> Installing breakpad exception handler for appid(steam)/version(0)
[02:55] <xxxxxxxxxcsadfas> libGL error: unable to load driver: r600_dri.so
[02:55] <xxxxxxxxxcsadfas> libGL error: driver pointer missing
[02:55] <xxxxxxxxxcsadfas> libGL error: failed to load driver: r600
[02:55] <FireStriker> how do i extract at higher promissions?
[02:56] <kostkon> xxxxxxxxxcsadfas, you need to use a pastebin, preferably paste.ubuntu.com
[02:56] <wafflejock> gffttt
[02:57] <xxxxxxxxxcsadfas> what is a paste bin
[02:57] <kicksled> !pastebin
[02:59] <xxxxxxxxxcsadfas> thx kost
[03:00] <protocol> i dont know why there are three of me
[03:02] <FireStriker> how to i extract at higer promissions? i want to install a game in "/usr/local/games"
[03:03] <FireStriker> nvm
[03:12] <airking> I have a VPN setup that I normally use to access the web, for some reason it isn't working right now (not asking you to fix that) but without the VPN my internet is measured in bytes per second when trying to access pages via a browser
[03:12] <airking> my ssh connections are fine
[03:12] <airking> I can open new ones no problem
[03:15] <pnwise_> maybe you had port blocked by isp/mobile provider airking
[03:16] <_44trent> So I tried to install openjdk-9-jdk, and this happend: http://paste.ubuntu.com/23395658/
[03:16] <_44trent> any one know how I could fix this?
[03:18] <airking> pnwise_: it was DNS
[03:18] <airking> I was a moron
[03:19] <joob> _44trent, was it installed before?
[03:19] <_44trent> i don't think so
[03:19] <_44trent> i don't remember it ever being installed anyway
[03:20] <joob> _44trent, sudo dpkg uninstall it and try again
[03:21] <joob> deinstall i mean
[03:28] <protocol_> cd ../..
[03:28] <protocol_> cd usr
[03:30] <vincent42> hi all
[03:30] <_44trent> nope, didn't fix it
[03:30] <_44trent> still getting the error
[03:30] <_44trent> same thing
[03:31] <vincent42> I'm using  linux-lts-vivid packport kernel on a 14.04 ubuntu system, is there any release to fix the dirtcow vulnerability ?
[03:32] <joob> _44trent, can you make do with jdk8? maybe you found an install bug and should report it
[03:32] <_44trent> okay
[03:32] <vincent42> I see this Ubuntu 14.04 LTS (Trusty Tahr):released (3.19.0-73.81~14.04.1)
[03:32] <vincent42> but I don't understand where this is released
[03:33] <vincent42> after apt-get update, this version is not proposed to me
[03:33] <joob> _44trent, 1 more thing.. probably wont help, not sure. sudo dpkg -f install
[03:34] <vincent42> from here https://people.canonical.com/~ubuntu-security/cve/2016/CVE-2016-5195.html
[03:34] <_44trent> hmm there weren't any errors with openjdk-9-jdk-headless
[03:34] <_44trent> what's the difference between headless and just openjdk-9-jdk?
[03:35] <dan__> i set bashrc to export R_HOME variable, why is it that if i do env | grep R_HOME, i see it, but if i open up a new terminal and do env | grep R_HOME i dont see it
[03:40] <Bashing-om> vincent42: That kernel (3.19.0-73.81~14.04.1) - vivid - no longer has support . need to get up on xenial's kernel .
[03:42] <vincent42> Bashing-om: really ? but that version contains has been updated very recently
[03:42] <vincent42> and contain the fix for dirtycow
[03:43] <Bashing-om> !vivid | vincent42
[03:44] <vincent42> anyway, my question is , how to get that version, I was doing "apt-get changelog linux-image-lts-vivid" and it only showed 3.19.0-73.70
[03:45] <vincent42> but then when I actually install the package, I see it install 3.19.0-73.81~14.04.1, so everything OK
[03:45] <Bashing-om> vincent42: See if ' sudo apt update ; sudo apt full-upgrade ' does not install the xenial kernel .
[03:46] <vincent42> OK I'(ve understood, apt-get changelog show the changelog of currently isntalled package, not of the package that would be upgraded
[03:47] <vincent42> hmmm, or not, after I upgrader the kernel it still does not show the very last version I just installed
[03:47] <vincent42> maybe not all release have a changelog then
[03:48] <cash> What up team
[03:49] <dan__> if anyone can help me install a ruby gem that is crashing i wll pay you.  not sure if this is a linux issue or a ruby issue
[03:49] <vincent42> ubottu: Bashing-om, maybe vivid is not lts, but the kernel I use is marked as LTS
[03:50] <joob> _44trent, i assume headless dont come with gui relevant code not sure.
[03:50] <vincent42> the package is called linux-lts-vivid, and it's actually for ubuntu 14.04 (it's a backport kernel)
[03:50] <Bashing-om> !hwe | vincent42
[03:54] <Bashing-om> vincent42: ^ suppirt for the vivid kermel per ^ ended on Aug of 2016 .
[03:54] <Bashing-om> support*
[04:00] <_44trent> anyway, where should i report the normal openjdk-9-jdk install bug to?
[04:00] <_44trent> i don't need any gui specific stuff i just wanted to test jshell and some other features that were added
[04:01] <_44trent> but it doesn't matter what i was trying to do what matters is that i report the bug
[04:02] <vincent42> Bashing-om: ok, anyway, I also have another ubuntu box which use the lts-xenial kernel,
[04:03] <vincent42> but here again, after a apt-get update, I don't see the new version supposed to contain the fix
[04:03] <vincent42> it proposes me 4.4.0.45.33
[04:03] <vincent42> but the fix is supposed to be in 4.4.0.45.66
[04:04] <Bashing-om> linux-image-generic xenial
[04:05] <Bashing-om> !info linux-image-generic xenial
[04:05] <vincent42> linux-image-generic-lts-xenial
[04:05] <vincent42> !info linux-image-generic-lts-xenial
[04:06] <Bashing-om> !info linux-image-generic-lts-xenial xenial
[04:06] <vincent42> but I'm on 14.04
[04:07] <vincent42> !info linux-image-generic-lts-xenial trusty
[04:07] <vincent42> there
[04:08] <vincent42> I'm looking at this page to know where the fix is supposed to be release : https://people.canonical.com/~ubuntu-security/cve/2016/CVE-2016-5195.html
[04:08] <vincent42> it does not fit
[04:08] <Bashing-om> vincent42: UH Huh .. 14.04 with HWE enabled . right ? .. such that now in 14.04 you should have xenial's kernel installed .
[04:09] <Bashing-om> vincent42: " sysop@1404mini:~$ uname -r >> 3.13.0-100-generic " where I do not have HWE enabled .
[04:10] <vincent42> then when I upgrade the package, now I see Get:1 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-4.4.0-45-generic amd64 4.4.0-45.66~14.04.1 [17.8 MB]
[04:10] <vincent42> it's the good version
[04:11] <vincent42> but I could not know before I download it the exact version it was going to dl
[04:11] <vincent42> there's something I don't understand
[04:11] <dguerrero> Good Day Everyone! By any chance someone here could help me with my approval on the #ubuntu-wiki-editors team?
[04:15] <Bashing-om> vincent42: I be similar in that there is bunches I do not understand . somethings I just take as given .
[04:18] <vincent42> Bashing-om: yeah, but I don't like to not understand :)
[04:18] <vincent42> anyway I guess everything's ok
[04:18] <vincent42> just need to reboot now
[04:19] <Bashing-om> dguerrero: See: https://ubuntuforums.org/showthread.php?t=2338744 post #2 . Does this help ?
[04:20] <Bashing-om> vincent42: same .. Hang in here and ask again .. perhaps a response from a knowledgable person  ?
[04:29] <IngCr3at1on> I've got a Lenovo y50-70 that I have ubuntu 16.04 on and I'm trying to figure out why the 8th inch audio input isn't working on it, read something that said "install pulse audio" but according to synaptic pulse itself is installed but there are several components that aren't anyone have any thoughts on a solution or what component may need to be installed?
[04:29] <chris1bass> Hello all! I'm going to lurk around just installed Ubuntu for first time.
[04:30] <chris1bass> Trying to take some baby steps, even then still stumbling.
[04:31] <IngCr3at1on> I should mention the built in mic works fine it's just the jack that doesn't seem to be detected
[04:32] <IngCr3at1on> ideally I need to fix it tonight cause I kind of need it working for something tomorrow
[04:33] <joob> IngCr3at1on, is the device seen an any of the tool panels in the os?
[04:33] <IngCr3at1on> joob when I look in the sound settings it just shows the internal/built in mic
[04:33] <joob> is it mic or line?
[04:34] <joob> ok so youre looking for line in
[04:34] <IngCr3at1on> yes
[04:34] <IngCr3at1on> right now I have my phone plugged into it with a line in just to try to get it working lol
[04:34] <joob> you using plain ubuntu 16.04?
[04:34] <IngCr3at1on> yes
[04:36] <joob> IngCr3at1on, there are some mixing apps(like PNMixer, etc) that might have access to line in.
[04:36] <IngCr3at1on> another random fact, if I plug my earbuds (which have a mic) into the headphone jack the mic on it does appear to work but doesn't list as a separate device but rather acts as the internal mic (however obviously that doesn't work with a normal line in)
[04:37] <IngCr3at1on> pnmixer eh... I could try that I guess
[04:37] <joob> IngCr3at1on, youre running pulseaudio right?
[04:37] <IngCr3at1on> yes
[04:37] <IngCr3at1on> or at least it's installed according to synaptic
[04:38] <joob> have you tried alsamixer in the terminal?
[04:38] <IngCr3at1on> hmm...
[04:38] <IngCr3at1on> fiddling with it now lol
[04:39] <dguerrero> @Bashing-om Thanks, that's what i was looking for. I submitted the join request, so for now let's wait the approval
[04:39] <joob> good. been years since ive used it
[04:40] <Bashing-om> dguerrero: Great ,, glad to be of some assistance . - That 10% that messes things up for the rest of us !
[04:41] <IngCr3at1on> hmm, not really seeing much helpful on that front
[04:47] <IngCr3at1on> I really feel like the main issue is the lack of line-in showing in the sound settings
[04:49] <IngCr3at1on> as for also capture only have mic, mic boost and capture (no line in)
[04:56] <joob> IngCr3at1on, thats why i mentioned alsamixer. ive seen it show devices not shown in a gui
[04:56] <IngCr3at1on> yeah I understand
[04:56] <IngCr3at1on> but as I said line-in isn't in alsamixer either
[04:57] <joob> found this. http://www.omgubuntu.co.uk/2014/02/sound-switcher-app-ubuntu
[04:58] <joob> IngCr3at1on, when you can, boot into a live distro and see if the line in works there.
[04:59] <IngCr3at1on> hmm... unless I'm reading that wrong that's not likely to make a difference, the writer just says they use it cause they don't like opening the system settings
[04:59] <IngCr3at1on> that's not a bad idea though...
[05:01] <joob> any chance your bios/efi might have settings for line in?
[05:02] <HypothesisFrog> hi. I'm on ubuntu studio 16.04, and I'm set up to automatically login to my main user account. How can I unset that, so that people have to select to login with the when the computer boots up?
[05:03] <joob> HypothesisFrog, i dont have studio but check for user settings or users and groups
[05:03] <IngCr3at1on> worth a look joob, if not something tells me I won't be solving this tonight; I'll check the bios really quick though
[05:09] <IngCr3at1on> bah
[05:09] <IngCr3at1on> nope nothing in the bios :(
[05:10] <IngCr3at1on> thanks anyway joob, I'm not going to mess with it anymore tonight; I'm tired and it's not insanely high priority in my mind (rarely doing something for free is high priority for me lol )
[05:20] <anto_> #XDCC.eu
[05:34] <greybert> There any examples on how to configure teamd/libteamd for bonding? I can't find anything decent.
[05:37] <DEFCODE> #a
[05:37] <DEFCODE> guys
[05:37] <DEFCODE> i so scared
[05:37] <DEFCODE> >*
[05:38] <mutante> DEFCODE: whats' up
[05:38] <DEFCODE> i was hacking one facebook
[05:38] <DEFCODE> but
[05:38] <DEFCODE> so
[05:38] <DEFCODE> im used keyloggers
[05:38] <brotherBox> >hacking facebook
[05:38] <brotherBox> wew
[05:38] <DEFCODE> so
[05:39] <DEFCODE> i not use proxy
[05:39] <DEFCODE> oh shit
[05:39] <mutante> you used a keylogger on somebody? that's not nice
[05:39] <DEFCODE> im infected all computer on my schoold
[05:40] <DEFCODE> and
[05:40] <DEFCODE> i have 20 accounts
[05:40] <brotherBox> are you 12
[05:40] <DEFCODE> hahahah
[05:40] <mutante> DEFCODE: you are infected?
[05:40] <DEFCODE> its a prank bro
[05:40] <DEFCODE> byeeeeeeeee
[05:40] <DEFCODE> guys
[05:41] <brotherBox> i am running ubuntu 16.10 on a machine with a multitouch pad, the ones where you cant click both mouse keys simultaneously. i am following http://askubuntu.com/a/306430 to enable that via pressing with three fingers
[05:42] <brotherBox> when i insert the lines into the file it does register in the X logs, but synclient -l still shows TapButton = 0 and it doesnt work. how can i fix this and have it enabled at startup without an ugly script
[05:42] <mutante> did you also try the part after "If editing the 50-synaptics.conf file doesn't work, " yet?
[05:43] <mutante> i dont have the slightest clue, but i noticed that comment at the end
[05:43] <brotherBox> mutante: i did in fact not...thats embarassing
[05:43] <brotherBox> one sec
[05:46] <xXEoflaOEXx> hi
[05:46] <joob> hi
[05:47] <linux> guys is anybody here?
[05:47] <joob> no.
[05:48] <joob> lol
[05:48] <linux> hey guys sorry such a noob here
[05:49] <joob> np
[05:49] <linux> Hey guys I'm new with linux   I can't seem to get pbs videos to work. Does anybody know how?
[05:49] <joob> post the video link
[05:49] <brotherBox> mutante: that was in fact the problem
[05:49] <brotherBox> sometimes i am not a smart man
[05:50] <tacio> So can someone tell me why I can't get a jedi knight academy server to run on ubuntu 64 bit?
[05:50] <linux> ok  but I've tried different pbs videos and just a black screen appears. pbs news works but not videos.
[05:50] <joob> post the video link, linux
[05:51] <mutante> brotherBox: it's some kind of weird effect that a second pair of eyes sees it after you stared at it too long, glad it works. i really dont know anything about the technical part, i just saw the "if it doesnt work" part
[05:51] <linux> http://www.pbs.org/video/
[05:53] <linux> any of the videos joob
[05:54] <joob> first one played for me
[05:54] <joob> flash video. does youtube work for you
[05:54] <Tex_Nick> linux: that link isn't a video ... this is ... http://www.pbs.org/video/2365869542/
[05:54] <mutante> allows a gazillion javascripts from different domains ..sigh
[05:54] <linux> hummm I'm using a live linux usb with persistance with firefox. So, what do you think it is?
[05:55] <mutante> it's Flash, thats why
[05:55] <mutante> the good old annoying "Flash on Linux" dance
[05:55] <linux> well, I thought I got flash maybe not
[05:56] <linux> I got the "extras"
[05:56] <kn330> Anybody using AMD graphics on 16.10? I am not getting full resolution on my LG Ultrawide
[05:56] <brotherBox> a lot of people think flash => copy protection
[05:56] <linux> I mean, I got the restricted extras. Does that include flash?
[05:57] <mutante> linux: what browser are you using ? http://www.wikihow.com/Install-Flash-Player-on-Ubuntu
[05:58] <linux> firefox
[05:59] <linux> ok I'll try that link mutante thanks
[05:59] <mutante> linux: you could try " sudo apt-get install flashplugin-installer "
[05:59] <linux> ok
[05:59] <chris2bass> Host os: Windows 10 Pro 64 bit, Guest os: Ubuntu 16.04 LTS. Using HyperV, im stumped on just getting Ubuntu connected to the internet.
[06:00] <chris2bass> I am inexperience with HyperV, and in general not very knowledge about a lot of these matters.
[06:01] <Oze> hi
[06:02] <Tex_Nick> kn330: what amd chipset & was it ok on 16.04 ?
[06:03] <kn330> Tex_Nick: It was OK before 16.04 (with fglrx)
[06:03] <joob> in your VM, type lspci |grep Ethernet
[06:03] <kn330> VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
[06:03] <joob> chris2bass
[06:04] <Oze> hi
[06:04] <Oze> someonecan help me
[06:04] <kn330> I am getting only 1920*1080 after upgrade to 16.04 (and 16.10)
[06:05] <chris2bass> joob,  do i type that in a terminal window? Last time i played with Linux was when I was 13, for like 3 days.
[06:06] <mutante> chris2bass: yes
[06:07] <Tex_Nick> kn330: so it's a kind of confusing story ... basically you're out of luck ... this link kind of ex[;ains the problem ... http://www.omgubuntu.co.uk/2016/03/ubuntu-drops-amd-catalyst-fglrx-driver-16-04
[06:08] <kn330> I have read that
[06:08] <kn330> looking for a fix/hack
[06:08] <xXEoflaOEXx> Is there any way to see if I am on fglrx, amd, or radeon using command line?
[06:08] <mutante> xXEoflaOEXx: lsmod ?
[06:09] <Tex_Nick> kn330: there is a lot of chatter on the net regarding this issue, but amd seems to not be responsive to it ... i heve the same problem so have reverted to ubuntu 15.10 for now
[06:10] <chris2bass> http://i.imgur.com/RyRRjAS.png I must be doing something incorrectly. Nothing happened when I typed that in.
[06:10] <xXEoflaOEXx> mutante: I am running AMD Radeon 9200 using radeon
[06:11] <mutante> xXEoflaOEXx: i meant to run that as a command "lsmod" or something like "lsmod | grep radeon" to answer your question how to check from commandline
[06:11] <mutante> it lists the loaded kernel modules
[06:11] <xXEoflaOEXx> mutante: It appears I am using radeon driver and not the fglrx, thanks
[06:12] <joob> chris2bass, thats the issue
[06:13] <mutante> chris2bass: try that with sudo
[06:13] <joob> chris2bass, your problem is with hyper-v. you might not have assiged an adapter or you did but it's disabled in hyper-v.
[06:13] <mutante> chris2bass: actually, ignore me, sry
[06:14] <joob> chris2bass, shouldnt need sudo but try. but its showin n gui but if not thru lspci
[06:14] <FatSpitfire> mornin guys :)
[06:22] <chris2bass> Tried sudo lspci |grep Ethernet , nothing happened. http://i.imgur.com/jfbVXNe.png , I believe it is on and enabled. I appreciate your patience by the way and thanks for taking the time to reply to me.
[06:32] <joob> chris2bass, check hyperv configs. do you happen to have a installed windows vm in your hyperv right now?
[06:34] <chris2bass> That will be the next step to test the network. Let me set it up
[06:35] <chris2bass> I currently do not
[06:36] <joob> chris2bass, if you did, i would suggest running live boot and see if nic is working
[06:36] <joob> so you cant say you'v even HAD networking in hyper-v if you have no other hosts correct?
[06:37] <KingsQuest> compile clamav and its family with h .91 compiler despite it being $18,000 per minute linux is virus free.
[06:37] <KingsQuest> not header but compiler
[06:38] <KingsQuest> its also legally imposed
[06:41] <chris2bass> joob, you are correct it hasn't been tested, It hasn't been proven to work, will test with another installation of windows
[06:45] <iamrohit7> i did do-release-upgrade and stopped midway before downloading. now whenever i do apt-get dist-upgrade, i get all the 16.10 stuff. how do i get back the 16.04 updates?
[06:47] <Bashing-om> iamrohit7: There is no undo . a Clean fresh install of 16.04 .
[06:48] <ducasse> iamrohit7: try "sudo sed -i 's/yakkety/xenial/g' /etc/apt/sources.list"
[06:51] <kn330> Tex_Nick: Ok
[06:53] <al_nz1> evening peeps
[06:53] <al_nz1> 203.97.49.101
[06:53] <al_nz1>  Evening peeps. I have a little intel NUC running ubuntu on a remote network and I want it to monitor ome ubiquiti radios and IP cameras (all of which have snmp) - is this a good job for the NUC to do with some SNMP monitoring software4
[06:54] <peeps[lappy]> evening al_nz1
[06:55] <joob> al_nz1, if the specs hold up sure. never seen one of those things yet
[06:56] <al_nz1> joob: with something like Nagios?
[06:56] <joob> al_nz1, motioneye is worth looking at for the cameras
[06:56] <joob> oh i thought you meant monitor the devices
[06:56] <joob> you mean monitor the host?
[06:56] <al_nz1> no - just that they are on the network
[06:56] <al_nz1> monitor from the little intel PC
[06:56] <joob> they on a lan or over the net?
[06:56] <ducasse> al_nz1: for smtp monitoring you can also use mrtg
[06:56] <Tex_Nick> kn330: Xorg.conf has been removed from 16.04 and later so any hack to older AMD graphics is kinda dead, nothing left to hack, we'll just have to install newer graphics
[06:57] <al_nz1> ducasse: ok I will google it. I only say nagios because its so well known
[06:57] <joob> yes ive used it, its nice
[06:57] <al_nz1> joob: will send a email if something goes down?
[06:57] <ducasse> al_nz1: it is, but it might be complex depending on what you want/need. mrtg is very simple.
[06:58] <al_nz1> ducasse: really, I just need a email if anything goes down
[06:59] <al_nz1> a bunch of ping monitors would do it
[07:00] <joob> al_nz1, it could, but writing your own script would do that.. you can get basic data emailed like uptime, space info, ram, wan ip of remote node, etc.
[07:00] <joob> i just wrote a script a few hours to do something similar.
[07:05] <chris2bass> Oh my god....... joob, I am so sorry man. The virtual switch was setup properly. It was activated and on. However I did the Ubuntu VM before doing the virtual network. During the VM creation there was no network to connect to. I did not remember to go back and connect to it.
[07:05] <chris2bass> While creating a new VM for windows 10, I noticed that the default is no connection.
[07:08] <al_nz1> joob: my bash isnt that good
[07:08] <al_nz1> did you use bash?
[07:10] <ducasse> al_nz1: i am sure if you do a little googling you will find tons of scripts like that
[07:10] <ndut2> hi all
[07:10] <ndut2> how are you
[07:10] <ndut2> what's the client for assembly in linux
[07:10] <ndut2> ?
[07:11] <kn330> ndut2: what do you mean by client?
[07:12] <ducasse> ndut2: you can use 'as' if you are asking for an assembler, it's in binutils
[07:12] <ndut2> yes as i mean
[07:13] <ndut2> binutils ?
[07:13] <ndut2> is that assembly support x64
[07:14] <kn330> http://www.tldp.org/HOWTO/Assembly-HOWTO/assemblers.html
[07:15] <ndut2> i read
[07:15] <ndut2> all support x86 only
[07:15] <ndut2> :(
[07:16] <ndut2> thx u though
[07:18] <joob> too bad he took off. NASM is 64 bit
[07:19] <ducasse> he didn't want x86 at all, which would have been useful to know a bit earlier...
[07:20] <kn330> Google gives enough 64-bit assembly tutorials for linux though
[07:27] <spreaderman> I am trying to config apache on ubuntu 14 to enable https.  Https appears to beworking BUT only for file in my webroot and not sub dirs.  What do you think I need to look at possibly?
[07:27] <kumarv3> how to pin applications ubuntu for quick launch?
[07:30] <kumarv3> Can anyone clarify on pinning applications for quick launch in Ubuntu?
[08:16] <tcz> hi, can anyone direct me to where I can track the eta of linux-image-generic-lts-yakkety availability in 16.04? thank you
[08:21] <joob> tcz, you want http://cdimage.ubuntu.com/daily-live/current/ i think.
[08:23] <joob> tcz, sorry i meant this https://wiki.ubuntu.com/Kernel/MainlineBuilds
[08:28] <ducasse> tcz: ask in #ubuntu-release
[08:45] <pixe|> ubunto is so kewl.. heheyeah baihbe
[08:45] <pixe|> ubunto=unbuntu
[08:52] <leejongwook> Anyone of you use Korean? How do I use it please?
[08:53] <pixe|> not sure. i am new. yahoo it
[08:54] <drjam> yahoo?
[08:54] <drjam> is that still a thing?
[08:54] <pixe|> i am at work. very busy. have an excellent day :)
[08:55] <leejongwook> pixe|: Are you Nixie Pixel? :P
[08:55] <pixe|> nixie pixel. yes i will yahoo it
[08:56] <pixe|> lol
[08:58] <drjam> lol
[08:59] <wafflejock> !ko | leejongwook not sure if this is the right one
[09:02] <leejongwook> wafflejock: I don't know who took over on ubuntu-ko before. He(probably a jerk) kicked me out of there before a 7 years ago permanently.
[09:03] <pixe|> leejongwook: thank you so much :p :)
[09:03] <destini> Can anybosy guide me about how to configure a Microsoft Exchange Email Account on Ubuntu?
[09:03] <leejongwook> pixe|: :P
[09:04] <destini>  Can any body guide me about how to configure a Microsoft Exchange Email Account on Ubuntu?
[09:05] <wafflejock> leejongwook, bummer yeah can't help you on the korean setup would imagine it's just locale configuration though no?
[09:05] <destini>  Can anybosy guide me about how to configure a Microsoft Exchange Email Account on Ubuntu?
[09:05] <wafflejock> destini, don't repeat
[09:05] <leejongwook> wafflejock: Thanks for pay attention to me. :) I'll figure it out somehow. Thanks. I appreciate it.
[09:06] <leejongwook> Bye for now.
[09:06] <destini> wafflejock... at least you are reading me...
[09:06] <wafflejock> destini, are you trying to get a direct exchange connection or is IMAP or POP/SMTP okay
[09:06] <destini> Its direct exchange...
[09:07] <wafflejock> destini, eh the chat stays here for the most part no need to repeat in IRC unless there are lots of people joining/leaving and you think new eyes will see it
[09:07] <wafflejock> destini, personally haven't done it but looks like thunderbird has an extension for communicating with Exchange http://www.techrepublic.com/blog/smb-technologist/connect-the-thunderbird-email-client-to-your-exchange-server/
[09:09] <destini> wafflejocjk... SMTP and POP worked for me on Thunderbird but not for the Microsoft Exchange... as I'm using Gmail on Thunderbird but not been able to do so with the Microsoft Exchange Account
[09:10] <wafflejock> destini, POP/SMTP/IMAP all should work regardless of the server/client since it's all standardized stuff the Exchange connection is a MS specific thing so I haven't seen any support for it outside of Exchange server and Outlook really
[09:11] <destini> It always promts me for password... even after correct input... hence, no forward step in configuration...
[09:11] <wafflejock> destini, you try doing it manually in the configuration for the accounts? sometimes need to pick the right TLS/STARTTLS or whatever and correct ports if they are non standard
[09:12] <destini> Every Exchange Account has its own different TLS/STARTTLS parameters...???
[09:13] <wafflejock> destini, no different mail servers have different defaults and people can change configuration so it's not going to be the same everywhere and personally run a Postfix mail server so haven't used exchange in a bit
[09:14] <king_> hello
[09:14] <wafflejock> destini, you can probably google for the default settings for your particular version of Exchange for ports and protocols but probably easier to look up how to check those things on the server if you have access
[09:14] <destini> wafflejock... I have an another issue too...
[09:16] <destini> Yeah I have access... been using echange account and also been configuring on daily basis on Windows...
[09:17] <destini> If i tell a bit more about myself so it would be against my privacy...
[09:18] <destini> I think that configuring an exchange account on a smartphone is far better than configuring it on laptop...
[09:18] <destini> and quiet easier...
[09:19] <wafflejock> destini, you can sudo apt install nmap, and nmap mail.example.com, with your server URL to see what ports are open and make sure those line up with what you have configured in Thunderbird or try some other clients to eliminate the possibility of some bug in that client
[09:19] <destini> wafflejock... thanks for your valuable suggestions bro...
[09:19] <arvstark> may I to join ?
[09:20] <wafflejock> destini, no prob let me know if there's anything I might be able to help with
[09:21] <tomreyn> arvstark: i fyou're asking whether you'Re welcome here, yes you are (as long as you are here to asl or answer ubutnt support questions and comply with the !guidelines).
[09:22] <destini> Sure I will...
[09:22] <tomreyn> i mean asK, not a/s/l there ;)
[09:22] <ztane> and again, 16.10, wifi dc, after reconnection no names are resolved. I explicitly add 8.8.8.8, 8.8.4.4 to network manager dns servers - to no avail.
[09:23] <TRUMP2016> gnome disk utility only allows LUKS to be used when creating Ext4 partitions. any way I can use it with FAT32? it's for a flash drive.
[09:23] <ztane> the dns servers all respond, including the ones configured by dhcp
[09:23] <ztane> ... nothing works until I remove 127.0.1.1 (dnsmasq) from resolv.conf.
[09:23] <whothehellami> hi, I have problems with nvidia. I've installed cuda 8.0.44 AND the nvidia accelerated graphics driver 367.48 within the cuda. now I can't login anymore because there is a "login loop" (after I enter the password I see the login screen again)
[09:24] <whothehellami> uname -r: 4.4.0-45-generic
[09:25] <ztane> whothehellami: did you see /var/log/messages ; /var/log/X.org.0.log
[09:25] <tomreyn> ztane: does this report any errors? service dnsmasq status
[09:26] <whothehellami> ztane, none of these files exist
[09:26] <arvstark> tomreyn: okay,, thankyou. I'm newbie in here...
[09:26] <tomreyn> arvstark: that's fine, no worries
[09:27] <ztane> tomreyn: user: no errors, root: Unit dnsmasq.service could not be found.
[09:27] <ztane> dnsmasq running under nobody
[09:28] <arvstark> tomreyn: thanks.. I'm user of elementary os loki, anyone else ?
[09:28] <tomreyn> ztane: dpkg -l dnsmasq
[09:28] <tomreyn> ztane: oh its running, so it must be installed, didnt notice
[09:28] <TRUMP2016> gnome disk utility only allows LUKS to be used when creating Ext4 partitions. any way I can use it with FAT32? it's for a flash drive.
[09:28] <ztane> dig @127.0.1.1 www.google.com -> no A.
[09:29] <tomreyn> ztane: you might still want to purge and reinstall it. should not do harm.
[09:29] <ztane> yeah probably :d
[09:29] <whothehellami> ztane, can u tell me why I can't purge nvidia-* (cannot be found)
[09:29] <tomreyn> !elementary | arvstark
[09:31] <arvstark> tomreyn: are you elementary os user too ?
[09:31] <ztane> tomreyn: hmm I didn't have dnsmasq per se, this is dnsmasq-base
[09:31] <tomreyn> arvstark: no. it is also not supported on this channel.
[09:31] <tomreyn> arvstark: see what ubottu told you.
[09:32] <ztane> I installed dnsmasq, let's see what happens now
[09:32] <tomreyn> ztane: this looks correct. dnsmasq-base and -utils is what you should have
[09:32] <ztane> [41390.726797] TCP: request_sock_TCP: Possible SYN flooding on port 53. Sending cookies.  Check SNMP counters.
[09:32] <arvstark> tomreyn : ouh,, I'm sorry... okay, I was read it... :)
[09:32] <tomreyn> ztane: actually -utils you don't need either
[09:33] <ztane> nice...
[09:33] <ztane> [41413.017640] traps: systemd-resolve[30907] general protection ip:7feb43cef226 sp:7ffcb891d980 error:0 in libsystemd-shared-231.so[7feb43c9e000+178000]
[09:34] <ztane> And just as I was starting to think that systemd is a nice thing indeed.
[09:34] <wafflejock> whothehellami, how did you install the CUDA drivers also you're on 16.04?
[09:34] <ztane> ok
[09:34] <afotek> Hello. I have a problem doing apt purge after installing a package with dpkg. It shows Unable to locate package *.dpkg, Couldn't find any package by glob '*.dpkg'. I can't seem to find a solution online
[09:35] <tomreyn> afotek: can you show the command you ran?
[09:36] <tomreyn> afotek: ideally botht he command you ran to install the package, and the command you ran to purge it
[09:36] <ztane> doubleplusungood: sudo netstat -lpn is stuck...
[09:38] <afotek> tomreyn: it is a deb package to add cuda repository, then I wanted to remove it, and packages installed from it. commands are dpkg -i cuda-repo.deb, apt update, apt install cuda. then dpkg -r cuda-repo, apt remove cuda*. then this message appears
[09:40] <ztane> I don't even... now dns doesn't again work anywhere
[09:41] <tomreyn> afotek: first of all, a word of warning: do not install .deb packages you downloaded somewhere unless you really know what you're doing. they need to match your distribution and work with other packages and package versions you have installed, or it can result in this and several other issues. instead, use PPAs / third party repositories if you need to add software not available in ubuntu itself.
[09:41] <ztane> dnsmasq reportedly runs on 127.0.0.1, dunno what is happening now... but, browsers do not resolve any addresses, dig @127.0.0.1 www.google.com no a,
[09:42] <ztane> tried to put 8.8.8.8, 8.8.4.4 in connection settings, no effect, dig @8.8.8.8 works
[09:42] <tomreyn> afotek: please put this command and its output on a !pastebin
[09:42] <tomreyn> dpkg -l nvidia\* cuda\*
[09:43] <ztane> what is worse **now sudo doesn't work because my hostname doesn't resolve, **wtf****
[09:43] <tomreyn> !pastebin | afotek
[09:43] <whothehellami> afotek, I am also trying to install cuda (with .run file) but after purging my old nvidia driver and installing the driver I could install with the .run file I cannot login anymore and it seems like no nvidia driver is installed (nothing to purge). can anyone help me?
[09:43] <brunch875> Does anyone know of a program to generate TOTP tokens which stores the keys in the gnome keyring?
[09:44] <tomreyn> ztane: i suggest you just reboot, then take another look at what may have gone wrong. that's unless you created unsupported packages or package versions (which could prevent the system from booting up fine)  and this led to this situation.
[09:44] <ztane> rebooted yesterday, this is take2 now :D
[09:45] <ztane> but yeah noted
[09:45] <afotek> tomreyn: http://pastebin.com/p5ca6Zug
[09:45] <tomreyn> ztane: i mean unless you *installed* unsupported packages, not created them.
[09:47] <afotek> tomreyn: I am sure about this .deb, since its from nvidia and it matches my dist version
[09:47] <tomreyn> afotek: sao no packages whose names start with either 'cuda' or 'nvidia' are currently installed. you may still have the APT repository installed. use "apt-cache policy" to check,  and put its output on a pastebin.
[09:48] <tomreyn> *so
[09:48] <ztane> well, everyone and their mom has unsupported packages, but they shouldn't be systemd related
[09:49] <afotek> tomreyn: http://pastebin.com/iR9dvt34
[09:49] <whothehellami> wafflejock, sry. didn't see your msg. I've run the .run installation file from https://developer.nvidia.com/cuda-downloads. and yes. ubuntu 16.04(.1) is installed
[09:50] <afotek> tomreyn: http://pastebin.com/86Cuevc9 this is the message displayed now when running apt remove cuda*
[09:50] <tomreyn> afotek: you only have default ubuntu repositories configured, no extra cuda repositories from nvidia
[09:50] <wafflejock> whothehellami, no worries.... yeah I have installed the CUDA drivers myself in the past but was a while back and only done it once and also had all sorts of problems getting it to work... was using it for Agisoft and worked well in the end but huge problems along the way
[09:51] <wafflejock> whothehellami, you may want to check for ~/.local/share/xorg for the xorg log believe it moved in some recent version
[09:51] <FireStriker> Hey guys how do you delete files in /usr/local/games?
[09:52] <MonkeyDust> FireStriker  sudo rm /usr/local/games/foo
[09:53] <wafflejock> whothehellami, can also probably using nomodeset boot param to avoid loading any advanced drivers if you just need to get logged in to try other things but I think in the end I wiped the system and just installed the CUDA drivers and it worked with a clean install and no other drivers configured
[09:53] <wafflejock> try* using
[09:53] <tomreyn> afotek: if you did "dpkg -i  cuda-repo-ubuntu1604_8.0.44-1_amd64.deb" to install the package, to remove it you'd need to use either "dpkg --purge cuda-repo-ubuntu1604" or "apt-get purge cuda-repo-ubuntu1604" (without the trailing '.deb')
[09:53] <tomreyn> afotek: but this package is not installed anyways.
[09:56] <whothehellami> I guess it is possible to pastebin a logfile via cli?
[09:56] <tomreyn> !pastebinit | whothehellami
[09:56] <whothehellami> ty
[09:58] <notdaniel> whothehellami, theres also termbin.com
[09:58] <notdaniel> no additional package necessary
[09:58] <notdaniel> (assuming you have nc installed, and chances are you do)
[09:59] <PyroPeter> hello. are there any plans to support zfs as a root filesystem in future releases?
[10:00] <ballpen> anyone who use qwebirc with unrealircd 4
[10:00] <MonkeyDust> PyroPeter  i guess you can select zfs during installation
[10:01] <afotek> tomreyn: solved it. was in the directory with that package, so instead of searching names from its cache, it used this name. sorry for bothering
[10:02] <tomreyn> afotek: you did not bother me. good luck.
[10:02] <PyroPeter> MonkeyDust: " Also note that ZFS is only supported for data storage, not the root filesystem."
[10:02] <FireStriker> I installed doom 3, how do I uninstall it?
[10:02] <PyroPeter> https://wiki.ubuntu.com/Kernel/Reference/ZFS
[10:04] <whothehellami> wafflejock, here is my /var/log/Xorg.0.log http://paste.ubuntu.com/23396587/
[10:04] <tomreyn> FireStriker: how did you install it?
[10:08] <tomreyn> PyroPeter: i don't know whether there ar eplans to support it. but if you want to try it (unsupported) now you could start here: https://github.com/zfsonlinux/zfs/wiki/Ubuntu
[10:10] <MonkeyDust> PyroPeter  'apt show zfs-kms ... Original-Maintainer: Darik Horn <dajhorn@vanadac.com>'   <-- contact this person
[10:10] <MonkeyDust> zfs-dkms*
[10:14] <tomreyn> (not) incidentially also a contributor to the github repository i pointed to.
[10:15] <tomreyn> (but i would not recommend contacting him directly)
[10:16] <MonkeyDust> (true)
[10:23] <emj98> hi
[10:24] <Meotera> Hello ! I have 2tb usb hard disk, I formated (ext4) it using gparted. However it mounts in read-only mode !
[10:24] <techie782> I might have a weird question. Last week I installed Ubuntu 16.10 Gnome while I was in Germany. Somehow the GNOME locale jumped to German. Now I'm back in The Netherlands I want to switch it to Dutch. Not the language but only the settings for units, days etc. Somehow Dutch isnt in the list of settings in Region&Language in GNOME.
[10:24] <Meotera> I tried sudo mount -o remount,uid=1000,gid=1000,rw /dev/sdc1 but I get mount: /media/odin/Savior not mounted or bad option
[10:25] <Meotera> But it is indeed mounted on /media/odin/Savior
[10:26] <Meotera> Sorry, I tried sudo mount -o remount,rw /dev/sdc1 and it worked indeed (no error message), however the disk is still read-only...
[10:31] <Ben64> Meotera: how do you know it's read only
[10:31] <wafflejock> whothehellami, if you search for (EE) in there can see error lines from what I see searching on those it looks like possibly multiple video modules loaded in the kernel
[10:32] <Meotera> Ben64: yes, I'm dumb. I tried to create a folder using "File" app and it was saying "read-only". I tried "mkdir folder" (without sudo!) from a terminal and it worked
[10:33] <Meotera> However it means something is borked with nautilus or whatever it is
[10:33] <wafflejock> whothehellami, if you search for LoadModule in your xorg looks like it has nvidia intel and nouveau
[10:34] <wafflejock> whothehellami, my guess is you want to disable the nouveau driver maybe the intel as well but I'm not entirely sure
[10:38] <whothehellami> wafflejock, mby following was not a good idea but I've installed nvidia-370 and now I can login again. I did this because I couldn't purge any nvidia package (not found)
[10:40] <whothehellami> wafflejock, how can I ensure that there is really only nvidia-370 installed?
[10:41] <thinky> hi
[10:42] <tomreyn> hi thinky
[10:42] <thinky> using ubuntu 16.04 and it upgraded opera browser but now opera is giving flashplayer is not uptodate
[10:42] <thinky> i am trying to do instructions here http://www.opera.com/docs/linux/plugins/install/#flash
[10:42] <thinky> but no luck
[10:42] <tomreyn> !flash | thinky
[10:43] <thinky> there s no directory /usr/lib/opera/plugins
[10:43] <thinky> tomreyn: i already installed pepperflash
[10:43] <thinky> but opera doesnt recognise it i dont know why
[10:44] <thinky> before update it was working fine
[10:44] <thinky> but after automatic opera update it doesnt work now
[10:44] <thinky> why isnt there directory /usr/lib/opera/plugins ?
[10:45] <thinky> i can see mozilla directory but not opera
[10:45] <tomreyn> !opera | thinky
[10:46] <tomreyn> read this page, it discusses how to update the pepperflash plugin
[10:46] <thinky> ok
[10:46] <tomreyn> well no itd oesn't discuss updating, but installing
[10:47] <wafflejock> whothehellami, you can basically use lspci -k to see what kernel modules is loaded for a particular device but I'm not sure how that works out when multiple video drivers are loaded
[10:48] <wafflejock> whothehellami, this page may help specifically the parts about troubleshooting video drivers https://wiki.ubuntu.com/X/Troubleshooting
[10:49] <thinky> tomreyn: how to restart opera? just close and open again?
[10:49] <wafflejock> whothehellami, regarding what's installed you can use, apt-cache policy nvidia*, to see what packages are marked installed in terms of apt
[10:49] <thinky> tomreyn: 2016-10-29 13:49:21 (309 KB/s) - ‘/tmp/pepperflashplugin-nonfree.Yxh2lWMbNe/google-chrome-stable_54.0.2840.71-1_amd64.deb’ saved [45532350/45532350]
[10:49] <thinky> mv: cannot stat 'unpackchrome/opt/google/chrome/PepperFlash/libpepflashplayer.so': No such file or directory
[10:49] <wafflejock> whothehellami, you may also want to check out lsmod and modprobe for listing modules loaded and modifying what modules are loaded
[10:51] <FireStriker> Tomreyn .run to default parth
[10:51] <lassegs[m]> Hi guys. I'm having a problem on my Thinkpad T440s with Intel video that xrandr doesnt show VGA output. Only eDP1, DP1, DP2, HDMI1,HDM2 and VIRTUAL1. But I'm sure theres a VGA here, and when running GNOME the VGA is actually picked up. Now I have to use xrandr because I'm running i3wm.  Where do I start to troubleshoot this, how can I add an undetected output to xrandr? Google is confusing on this.
[10:56] <Sircle> I plugged 2 dvi cards (one with 2 ports and one with 1). The first one gave 2 displays but not the third one. I was using nvidia 340.96 driver. When I switched to nouvea drivers I got the third display but  my mouse display disappeared.
[10:56] <Sircle> any clues why?
[11:00] <Tims_Tech> I accidently deleted all of my hard work(from around 5 hours of work) , how to recover them?
[11:00] <Tims_Tech> I accidently removed them with rm
[11:05] <lassegs[m]> Tims_Tech: rm goes to .trash folder in ur home directory , unless u used the -rm option
[11:05] <lassegs[m]> Tims_Tech: sorry *-rf option
[11:06] <xubuntu42d> Hello, guys! How can I hide :i386 packeges offers in ubuntu software center?
[11:06] <xubuntu42d> It shows me these, after I installed and purged binutils-multiarch
[11:08] <maxiideapad> hey i have one question. Could anybody assist me with it?
[11:08] <lassegs[m]> maxiideapad: just ask, you know :)
[11:09] <Tims_Tech> lassegs[m], I used the -rf option :p
[11:09] <Tims_Tech> I am using testdisk now
[11:09] <Tims_Tech> to scan :p
[11:09] <wafflejock> xubuntu42d, I think the software center is just a front end for apt-get/apt-update so if your apt sources doesn't contain references to repos that serve i386 packages then doing a sudo apt update, should get the list of packages that don't include i386
[11:12] <whothehellami> wafflejock, thank you for all your help. I'll have a look at these commands later
[11:13] <xubuntu42d> wafflejock, I do "sudo apt upgade" but USC still offers :i386
[11:13] <xubuntu42d> I've done
[11:13] <wafflejock> xubuntu42d, did you do sudo apt update first? update gets package listings, upgrade tries to upgrade installed packages
[11:14] <wafflejock> xubuntu42d, also check out your cat /etc/apt/sources.list possibly stuff about i386 in there still, really not sure just throwing out some ideas :)
[11:14] <xubuntu42d> sudo aot update, of couse
[11:15] <xubuntu42d> sudo apt update, of course
[11:16] <FireStriker> hey guys
[11:17] <FireStriker> how do i uninstall doom3 installed from the .run into the defult parth which is '/usr/local/games/doom3'
[11:17] <wafflejock> whothehellami, no problem good luck with that too it is a bit of a mess to get working from what I saw but depending on what you're using it for might be worth it :)
[11:17] <Ben64> FireStriker: see if the run has an uninstall thing
[11:20] <Sircle> I plugged 2 dvi cards (one with 2 ports and one with 1). The first one gave 2 displays ut not the third one. I was using nvidia 340.96 driver. When I switched to nouvea drivers I got the third display but  my mouse display disappeared. Any clues on ubuntu?
[11:27] <FireStriker> Ben64: nope no uninstall on the run
[11:27] <ballpen> hey anyone who uses unrealircd? :
[11:27] <ballpen> :D
[11:28] <FireStriker> good question it looks nice
[11:30] <elli> hi, how install Pantheon 0.4 ? new elementary OS desktop Loki
[11:32] <wafflejock> FireStriker, basically the .run file can do whatever when you execute it, it isn't a .deb file so you don't install/uninstall with dpkg which is the package manager built into ubuntu... long story short you just need to find what the .run file changed and revert the changes (likely just copied files somewhere but hard to say)
[11:32] <wafflejock> !elementary | elli
[11:33] <FireStriker> i know where it is i just need to know how to deleat them so i can reinstall in a diffenct parth
[11:33] <elli> ubottu: its ubuntu channel? i need install for ubuntu
[11:33] <elli> join  #elementary
[11:33] <FireStriker> its in /usr/local/game and /usr/local/bin
[11:34] <wafflejock> elli, are you running Ubuntu or Elementary? if elementary ask in that channel if Ubuntu this is the right place for support
[11:34] <elli> ok thanks
[11:34] <elli> i need install for ubuntu
[11:34] <FireStriker> need to remove the doom 3 file in /usr/local/bin
[11:34] <wafflejock> elli, have a link for Pantheon 0.4 I don't see it in the packages in the default repos
[11:35] <FireStriker> and remove doom3 and doom3-doom3-dedicated files in /usr/local/bin
[11:35] <FireStriker> hangon its doom 3 folder in /usr/local/games
[11:35] <FireStriker> lol
[11:36] <wafflejock> FireStriker, many times the binaries are just linked there you may want to use ls -al /usr/local/bin to see if the doom file is linked from some other location, to remove files you can use rm, if you need to remove as root can use sudo rm but be careful with what you're removing that way can delete important parts of your system
[11:36] <elli> wafflejock: thanks
[11:37] <FireStriker> ik i fucked my install of lubuntu using the mv commnad moving pk4's into that file
[11:37] <FireStriker> it keept throwing errors and not doing anything so i dont knwo what happned
[11:38] <wafflejock> FireStriker, yeah it's best to just use things in the default repos, then install and removal typically goes fine, also watch language in here or can get kicked by ops
[11:39] <FireStriker> ok
[11:39] <wafflejock> FireStriker, if it isn't in the repos then have to trust whoever you're getting packages from but still best to only install things packaged for your particular version of Ubuntu otherwise can have dependency problems or conflicts with different versions of things installed
[11:39] <xjkx> I'd like to verify the safety of a file, but I dont know how, am I to download an anti virus ? I use ubuntu, and Google Chrome no longer offers a version for 32 bits computers, only 64 bits. But I found an older version, in 32 bits, in archive.org but that's not official, so...how can I even test this file ? I have no other way, because Netflix only works right in Chrome, and chromium, that we can get in apt-get, it doesn't work, they mention a plugin but apt
[11:40] <akik> xjkx: if you change the http user agent of firefox to chrome, you can use netflix with it
[11:40] <FireStriker> it works it might not be for 16.04 as it was last updated 2007 or something but it works it just a game thing that needs the pk4s move into it so how do i use the rm command in a way that wont screw up my install of ubuntu
[11:42] <tomreyn> rm: don't delete files which are required by the operating system or applications, or which contain data or code still required.
[11:42] <tomreyn> i mean FireStriker
[11:42] <wafflejock> FireStriker, there are no guarantees when you are removing things from the system especially as root, there's no way to be 100% safe when deleting things that way hence the suggestion about where/how to install things, rm just removes a file from the filesystem but if that's a critical file then you'll have problems
[11:42] <tomreyn> generic question, generic answer
[11:43] <FireStriker> !pastebin
[11:43] <xjkx> akik: I didn't understand what you said,  you want me to use firefox ? It doesn't work, I think
[11:43] <FireStriker> !pastebinit
[11:44] <FireStriker> how do a !pastebinit
[11:44] <tomreyn> xjkx: use firefox with user ganet switcher add-on, load an updated list of user agents, and set the user agent to be chrome
[11:44] <cypher__> hi!
[11:44] <FireStriker> i am new
[11:44] <FireStriker> like rly new
[11:44] <tomreyn> !temrinal | FireStriker
[11:44] <tomreyn> !terminal | FireStriker
[11:45] <xjkx> tomreyn: I'll try that thanks
[11:45] <cypher__> i have some problems while installing gcc and g++!
[11:45] <akik> xjkx: http user agent is the string your browser sends to the remote www server
[11:45] <tomreyn> FireStriker: you need to use pastebinit from a temrinal
[11:45] <wafflejock> FireStriker, you can basically type somecommandhere | pastebinit, and it will give you a link with the output from your command
[11:45] <akik> xjkx: it's an identifier of your browser name and version
[11:45] <Ben64> cypher__: ok
[11:46] <FireStriker> i kow i have a termial up i want to know what i type and what i need to instal? to get it to run that command confued me
[11:46] <FireStriker> the bot command
[11:46] <FireStriker> oh dear
[11:46] <FireStriker> soz kow was going trying to say know
[11:46] <xjkx> akik, tomreyn, so basically, Netflix would work in firefox, but they're bitching me to get chrome
[11:46] <wafflejock> FireStriker, sudo apt install pastebinit, if you want to install that package
[11:47] <tomreyn> xjkx: that's what akik said, i know nothing about it.
[11:47] <akik> xjkx: after you change the user agent, there's no bitching
[11:47] <xjkx> Alright, thanks
[11:47] <FireStriker> let me start aign lol
[11:48] <FireStriker> i fell like iam being a dick now
[11:48] <FireStriker> soz if i am being a dick
[11:49] <mikubuntu> i thought i had a great idea, to just do a side by side fresh install which would preserve all my data on a partition but when i started the installation i got to this point and chickened out bc it looks like i might still have trouble accessing my (old) files -- https://goo.gl/photos/w5oMhxn45en6xbiSA
[11:49] <akik> xjkx: although i can't be certain if this method works with the 32-bit firefox
[11:49] <FireStriker> ok the .run from doom 3 installs to /usr/local/games in doom3 which it makes. there is 2 files in /usr/local/bin that is from it. what do i do to uninstall it
[11:49] <Ben64> FireStriker: basically, nobody here knows what to tell you because we don't support stuff that isn't in the ubuntu repositories. you were here earlier trying to install doom using that run file. you're pretty much on your own on this.
[11:49] <xjkx> akik: I'll find out in a bit
[11:49] <FireStriker> i want to know how to remove files
[11:49] <Ben64> "rm" removes files, good luck
[11:49] <wafflejock> !rm | FireStriker
[11:50] <tomreyn> xjkx: http://askubuntu.com/questions/828286/now-that-i-have-firefox-49-how-do-i-watch-netflix
[11:50] <tomreyn> "Edit 2: This also works on 32 bit Ubuntu! Woo hoo!"
[11:51] <tomreyn> xjkx: be sure to also tell netflix that the experience sucks
[11:51] <mikubuntu> i wish i could just get help fixing the system that broke several months ago after doing a software update (it might have been an upgrade from 14.04 to 15.10)
[11:51] <Ben64> mikubuntu: 14.04 doesn't upgrade to 15.10
[11:52] <FireStriker> i am trying to get help on the commands becuase i am new i dont know much, but i am learning fast i seems falry state foword but i want to dobble check so i dont screw up enother instal of ubuntu/lubuntu
[11:54] <mikubuntu> Ben64: maybe i did it in steps? i know i had 14.04 and the installer says i have 15.10 on the hdd -- https://goo.gl/photos/JEP6BHF7eqahvowt5
[11:54] <Irany> How do i set to Nemo instantly enter my SSH server?
[11:54] <wafflejock> FireStriker, problem is no one here can tell you what to delete exactly to clean up what that script did so we can tell you how the tools in the system work but can't guarantee anything about how you use them in this case, with .deb files installed with dpkg there is a clear way to remove and stuff in the repos has been tested to work with the system everything else can't really be recommended or supported
[11:55] <Ben64> mikubuntu: ok well do you have an actual question anywhere
[11:55] <gnu2> my gt730 won't output to vga after X is init, just black screen
[11:55] <wafflejock> FireStriker, with .deb files you use dpkg to install and dpkg has a list of all packages it installed and can tell it to uninstall some package and it knows where the files are and has any scripts for cleaning things up, with .run could do anything and in this case seems it has no uninstall
[11:57] <FireStriker> ok let help you a bit its in /usr/local/games in a folder called doom3 would the command go a little like this? 'sudo rm /usr/local/games/doom3'
[11:58] <gnu2> my gt730 won't output to vga after X is init, just black screen
[11:58] <mikubuntu> Ben64: more of an appeal than a question. i'd like to get help restoring the system that broke on update several mos ago. (black screen)
[11:59] <xjkx> tomreyn, akik, firefox worked :o ty
[12:00] <wafflejock> FireStriker, if doom3 is a file it will work if it is a folder you need to use the -rf flags with rm like sudo rm -rf /directory/i/want/gone/forever, be awful careful with that one though a bad path and you can really destroy your system fast :)
[12:00] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:00] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:01] <FireStriker> ik so use "sudo rm -rf /usr/local/games/doom3" and make shore i dont bugger it up
[12:01] <wafflejock> !patience | gnu2
[12:01] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:01] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:01] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:01] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:01] <wafflejock> FireStriker, yah just be very careful with that since could remove anything and will be recursively deleting any sub folders
[12:02]  * gnu2 's question is like the sun: it keeps shining
[12:02] <FireStriker> any subfolder inside doom3 or if i bugger up inside of local
[12:02] <FireStriker> also is case and all of that allgo
[12:02] <FireStriker> good
[12:03] <younder> Why is brazro not in the repository for 16.04?
[12:03] <mikubuntu> i wish i could just get help fixing the system that broke several months ago after doing a software update (it might have been an upgrade from 14.04 to 15.10)
[12:04] <wafflejock> younder, brasero ?
[12:04] <wafflejock> !info brasero
[12:05] <younder> wafflejock, yes the CD burner stuff
[12:05] <wafflejock> younder, it's in there just had spelling wrong I think
[12:06] <wafflejock> !info brasero xenial
[12:06] <younder> wafflejock, DOH
[12:06] <wafflejock> younder, yeah I think of it as z sound too easy mistake :)
[12:10] <performer> hei, why my znc can't connect ? on root it's say it's already running
[12:11] <younder> wafflejock, anyhow it will have to wait the local ubuntu repository at trivini.no is down
[12:12] <asus-x33> hello
[12:12] <asus-x33> can i hel you??
[12:12] <FireStriker> wafflejock: is this command currect with no typos upto /doom3
[12:12] <FireStriker> sudo rm -rf /usr/local/games/doom3"
[12:13] <weng> good
[12:13] <wafflejock> FireStriker, yeah (no double quote at the end) will blow away that folder no taksie backsies :)
[12:14] <FireStriker> thanks its gorn without killing anything else
[12:16] <ztane> argh someone should fix the do-release-upgrade so that it *flushes* input buffers before it asks for a new question...
[12:16] <wafflejock> FireStriker, yeah probably fine but anytime you remove something from disk like that you really don't entirely know everything is working fine until you reboot because things can remain in RAM that are no longer on disk, you should be fine I think here but just saying in general
[12:17] <FireStriker> it has destoryed the file and it looks like that was all it toched
[12:17] <FireStriker> so the 2 files in /usr/local/bin may go when i reboot?
[12:18] <wafflejock> FireStriker, no it won't automatically get rid of more stuff when you reboot I just meant for example if you launched firefox then deleted the firefox binary you could keep firefox running, or if you deleted some system config files you wouldn't notice until those config files are read again
[12:18] <Sircle> Tazmain:  line 43 https://pastebin.mozilla.org/8923064 errors while create xorg. After lightdm restart, plasma does not starts.
[12:19] <wafflejock> FireStriker, regarding the files in /usr/local/bin you would have to still delete those manually as well, if they are just files you can use rm without the -rf though
[12:20] <FireStriker> hangon can i open the termanl in the /usr/local/bin and deleate doom3 and doom3-dedicated like "sudo rm doom3"
[12:21] <FireStriker> that makes it a little safer right?
[12:22] <FireStriker> if not the command will be "sudo rm /usr/local/bin doom3"
[12:22] <FireStriker> right
[12:22] <weng> remove game
[12:22] <weng> remove game suites
[12:23] <wafflejock> FireStriker, yeah you can navigate into the folder first and then use a relative path if you want it is a little bit safer since you can't accidentally hit enter too early and delete something else
[12:24] <wafflejock> FireStriker, so long as you aren't using -rf it's a little safer already since it won't delete directories
[12:24] <FireStriker> ok
[12:24] <FireStriker> command right?
[12:24] <wafflejock> FireStriker, you would want slash before the file too like sudo rm /usr/local/bin/doom3
[12:24] <FireStriker> ok
[12:25] <FireStriker> so termal in file it would be /doom3 right
[12:25] <FireStriker> or just doom3
[12:26] <wafflejock> if you already cd to the folder just doom3
[12:26] <FireStriker> k
[12:27] <FireStriker> thanks for the help
[12:27] <wafflejock> FireStriker, when you start a path with / it assumes you mean the root of the filesystem if you do ./ the dot means current location if you don't start with a slash or dot slash it is relative to the current folder (can pwd to see the current directory path)
[12:27] <wafflejock> FireStriker, no prob
[12:27] <FireStriker> ok
[12:36] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:36] <gnu2> dmesg: http://pastebin.ca/3733946
[12:36] <gnu2> Xorg.0.log: http://pastebin.ca/3733947
[12:36] <gnu2> my gt730 won't output to vga after X is init, just black screen
[12:36] <gnu2> dmesg: http://pastebin.ca/3733946
[12:36] <gnu2> Xorg.0.log: http://pastebin.ca/3733947
[12:47] <snfgf> how can i launch a serial terminal on /dev/ttyUSB0 without GNU screen?
[12:51] <lordcirth> snfgf, http://www.cyberciti.biz/hardware/5-linux-unix-commands-for-connecting-to-the-serial-console/
[12:53] <lordcirth> I'd just use screen, though...
[12:54] <lordcirth> snfgf, here's more: https://wiki.archlinux.org/index.php/Working_with_the_serial_console#Connect_using_a_terminal_emulator_program
[12:59] <snfgf> lordcirth, thanks, but most of those commands don't seem to be accessible to me, i am installing screen under my $HOME
[12:59] <snfgf> but! even though I use --bindir=$HOME/software/bin
[12:59] <snfgf> i get the error message
[12:59] <snfgf>  /usr/bin/install: cannot create regular file '//bin/screen-4.4.0': Permission denied
[13:00] <rthornton> presumably the uname -r
[13:00] <rthornton> 4.4.0-45-generic
[13:00] <rthornton>  is a patched kernel w.r.t. the recent discovery of a 2005 era kernel bug CVE-2016-5195 privilege-escalation?
[13:11] <BluesKaj> Hi folks
[13:11] <OerHeks> heya BluesKaj
[13:12] <vladp> just upgraded to yakkety yak and now my desktop won't show... tried xfwm4 --replace and playing with window manager but nothing helps. anyone has any ideas ? screenshot: http://i.imgur.com/9mdDNJi.png
[13:13] <vladp> and I can only click in the upper left corner of the desktop o.O
[13:15] <OerHeks> strange, i see a desktop @ http://i.imgur.com/9mdDNJi.png
[13:16] <vladp> OerHeks: I think I chose the wrong words, what I meant to say is: my desktop is full of files and icons, but now nothing will show except for Plank and upper panel
[13:16] <vladp> OerHeks: and I can only right click in the upper left corner, nowhere else
[13:16] <BluesKaj> Hi OerHeks
[13:17] <MonkeyDust> vladp  looks like a decent desktop, what more do you want to see
[13:18] <weng> I like unity
[13:18] <vladp> MonkeyDust: all of this: http://i.imgur.com/9R7aWS1.png
[13:19] <vladp> something went wrong after the upgrade T_T my background wont update etc.
[13:19] <MonkeyDust> vladp  yes, that's the filemanager
[13:20] <MonkeyDust> vladp  oh, i see, all the documents on the desktop
[13:22] <wom> my PATH got suddenly messed up (/bin was missing), and this happened while I was installing vagrant and virtualbox - I'm just curious that why this happened? any ideas?
[13:22] <vladp> MonkeyDust: it worked before the upgrade though... here's an example when I try to right click on a wallpaper suggest by variety: https://i.imgur.com/IFEeAk7.png
[13:22] <helpmeplz> is it a good idea to take someone else's business name as my domain name and use a different top level domain?
[13:23] <vladp> helpmeplz: no
[13:23] <helpmeplz> but my initials are the business name
[13:23] <OerHeks> helpmeplz, not really an ubuntu issue
[13:24] <helpmeplz> where should I go then
[13:24] <vladp> helpmeplz: I think in your heart you already know the answer, follow your heart :)
[13:26] <SchrodingersScat> !offtopic | helpmeplz
[13:26] <helpmeplz> har har har
[13:30] <wom> my PATH got suddenly messed up (/bin was missing), and this happened while I was installing vagrant and virtualbox - I'm just curious that why this happened? any ideas?
[13:33] <Jamma> Hello guys! I have a problem with my laptop running ubuntu. It doesn't find my wifi even if it usually does with no problems
[13:34] <SchrodingersScat> helpmeplz: which, I'm actually curious and willing to discuss it a little, if you make it into #ubuntu-offtopic
[13:36] <weng> Jamma: try  reset your wifi router
[13:38] <Jamma> I'll try, but it's weird because it works great on the other devices
[13:44] <ambarwariagus> Good night Mr. Mrs.
[13:45] <ambarwariagus> Any someone in this room?
[13:46] <ambarwariagus> I have a question about python in ubuntu
[13:49] <pragmaticus> hi, i'm on ubuntu server 14.04, trying to install libgeotiff-espg, but it cant find the package, normally it has to be in the default sources, any ideas?
[13:50] <weng> google it
[13:50] <weng> then wget the url
[13:50] <weng> dpkg install
[13:51] <kostkon> !info libgeotiff-espg trusty
[13:51] <pragmaticus> found this url https://launchpad.net/ubuntu/+source/libgeotiff-epsg/1.4.0-1
[13:51] <DJones> pragmaticus: Looks like it might be part of http://packages.ubuntu.com/trusty/libgeotiff-epsg
[13:51] <weng> yes
[13:52] <weng> just wget it
[13:52] <weng> or curl
[13:52] <weng> but it may be not secure
[13:53] <pragmaticus> should i wget this url http://packages.ubuntu.com/trusty/libgeotiff-epsg?
[13:53] <DJones> pragmaticus: http://packages.ubuntu.com/trusty/libgeotiff2 Looks like it includes the file, maybe just install that package
[13:53] <weng> yes
[13:53] <kostkon> !info libgeotiff-epsg trusty
[13:53] <shichao> hello!
[13:54] <shichao> hello!
[13:54] <pragmaticus> DJones, i'll try your approache, how did you know that it's part of the geotiff2 package?
[13:54] <kostkon> pragmaticus: try enabling the multiverse repo
[13:55] <limbu> hi
[13:55] <DJones> pragmaticus: Just searched on packages.ubuntu.com to find files related to the file
[13:55] <pragmaticus> Djones, thanks.
[13:56] <test> ver aetos.irc.gr
[13:56] <weng> wget http://launchpadlibrarian.net/160030060/libgeotiff-epsg_1.4.0-1_all.deb
[13:56] <weng> sudo dpkg -i libg*.deb
[13:56] <OerHeks> weng, wrong advise
[13:56] <weng> why
[13:57] <OerHeks> and it is solved by now, read back please
[13:57] <weng> ok
[13:59] <pragmaticus> kostkon, FYI enabled multiverse and can now install libgeotiff-epsg. Thank you all!
[14:00] <kostkon> pragmaticus: :)
[14:21] <Quique> Hemos some one spic espanish
[14:22] <Guest91634> Helow
[14:22] <MonkeyDust> !es
[14:22] <Guest91634> Gracias w
[14:22] <Guest91634> Wat
[14:23] <jagdish> / join #ubuntu
[14:30] <carbine> Hello everyone.
[14:30] <SchrodingersScat> carbine: hello
[14:31] <carbine> I hate to be a thorn in anyone's side this early in the morning (depending on where you are located), but has anyone had issues with waking from a suspend?
[14:31] <MonkeyDust> carbine  start from the beginning, what are the symptoms
[14:33] <carbine> When I either manually suspend, or close the lid causing a suspend, upon wake (by pressing any key) I get a black screen with a non-blinking cursor. I can ctrl+alt+f[num], but the display will freeze once I do that. I am using an Acer Z5WAH running a nearly fresh install of Ubuntu 16.04.
[14:33] <carbine> I have an error report on my screen that I wish I were able to copy/pastebin
[14:42] <carbine> Well that went exactly as expected lol
[14:46] <carbine> http://pastebin.com/v8ezqQtE - dmesg
[14:47] <carbine> This appears as if it may be a graphics driver issue
[14:48] <carbine> According to https://wiki.ubuntu.com/DebuggingKernelSuspend, if I run into a second "hash matches" in my dmesg, that device is probably the culprit with my suspend issues.
[14:54] <liefer> Lets say i have 2 harddrives that i want to run in RAID. Would it be possible to have it setup such that each hdd has 2 partitions (a1, b1, a2, b2) and have partition a1 and a2 mirror/replicate eachother but b1 and b2 not (that is, b1 and b2 is set up to give maximum space)
[14:55] <akik> liefer: short answer is yes
[14:55] <liefer> akik, and the long answer? :D
[14:56] <akik> liefer: you can create a mdadm setup to do that
[14:57] <akik> liefer: was just thinking that it's not always easy :)
[14:57] <liefer> i will look into mdadm thank you
[14:57] <kk4ewt> though i would have a1 mirror to b1
[14:57] <kk4ewt> then a2 and b2 be separate
[14:58] <kk4ewt> that way you you have the raid mirrored in case a drive crashes
[14:58] <akik> kk4ewt: i think he meant the numbers to mean the separate disks
[14:59] <kk4ewt> yes but he is mirroring drive A 1 to Drive A 2
[14:59] <kk4ewt> which if drive A dies he is hosed
[15:00] <liefer> i meant to have the same data mirrored on the each of the two physical hdd's
[15:00] <liefer> sorry if that wasnt clear
[15:00] <akik> liefer: yes it wasn't clear
[15:03] <akik> liefer: so you could've said mirror sda1 to sdb1 and keep sda2 and sdb2 non-mirrored
[15:03] <Irany> Someone know how to fix this: "Tor unexpectedly exited" ?
[15:04] <liefer> i should have just asked if it was possible to mirror just partitions in a RAID setup, instead of entire disks
[15:04] <akik> liefer: yes :)
[15:04] <liefer> :D
[15:15] <Fenster> hey guys
[15:15] <Fenster> I was in here the other day and some guys helped me copy contents to an external drive using rsync
[15:15] <Fenster> I was hoping I get some help copying them back
[15:15] <Fenster> I have the source and destination
[15:15] <Fenster> just need the rsync options
[15:16] <kk4ewt> do you have the instructions from the other day?
[15:17] <Fenster> no, I dont believe my irc client is logging :\
[15:17] <Sircle> Can anyone refer to a detailed newbie guide for multiseatx?
[15:17] <Fenster> bascially I just want to take all files in  root dir of a USB drive and transfer to a folder called Old Windows Files
[15:18] <MonkeyDust> Fenster  use the find command command
[15:18] <MonkeyDust> typo*
[15:19] <Fenster> I did something like this:  rsync -avh /home/usr/dir/ /media/disk/backup/
[15:19] <Fenster> we'll see how it goes
[15:22] <kk4ewt> so reverse that
[15:22] <Fenster> right
[15:22] <Fenster> some have alrady been transferred... will rsync overwrite?
[15:23] <Fenster> or duplicate?
[15:23] <wafflejock> Fenster, see man rsync, Rsync finds files that need to be transferred using a "quick check" algorithm (by default) that looks for files that have changed in size or in last-modified time.
[15:24] <minsub> k
[15:24] <helllojesus12> can someone help me with tomcat 7 installation?
[15:24] <helllojesus12> I am getting an error with tomcat7.service when I try to install using apt-get install
[15:25] <minsub> can you show me the logs
[15:25] <helllojesus12> Its an error related to dpkg. I tried reading some of the threads on stackoverflow but I did not really understand some of it.
[15:25] <helllojesus12> Sure minsub
[15:27] <No_Wifi> I recently moved to Ubuntu 14.04 from windows. I am not able to access wifi when booted into ubuntu. I use a lenovo yoga 2 13 laptop with network driver intel wireless 7260. rfkill gives wireless and bluetooth as hardblocked.
[15:28] <No_Wifi> Can anyone help?
[15:28] <helllojesus12> minsub, here is the pastebin: http://pastebin.com/Fhbv6wdM
[15:28] <helllojesus12> This output is from systemctl status
[15:29] <No_Wifi> Anyone?
[15:30] <helllojesus12> minsub, here is the output from journalctl -xe: http://pastebin.com/mz9eBdWM
[15:32] <doji> No_Wifi, have you tried to see if the interface is recongnized? try 'ip link' in the command line and see if the wifi interface is there
[15:32] <doji> if not, you are probably missing a driver
[15:33] <No_Wifi> :doji
[15:33] <helllojesus12> any help with tomcat7 installation is appreciated.
[15:33] <No_Wifi> wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
[15:34] <doji> state DOWN
[15:34] <No_Wifi> Yeah. It's recognized tho, right?
[15:34] <MonkeyDust> No_Wifi  try with ifup
[15:34] <doji> so try sudo ip link set wlan0 up
[15:35] <No_Wifi> Tried. Still DOWN.
[15:35] <doji> did it give any output?
[15:35] <No_Wifi> No output.
[15:35] <Sircle> Can anyone refer to a detailed newbie guide for multiseatx?
[15:36] <gnu_> my gt730 won't output to vga after X is init, just black screen (Both VGA and DVI). Once screen goes black, can connect to SSH, but won't create shell.
[15:36] <gnu_> dmesg: http://pastebin.ca/3733946
[15:36] <gnu_> Xorg.0.log: http://pastebin.ca/3733947
[15:36] <gnu_> please help
[15:36] <gnu_> PLEASE
[15:37] <gnu_> once X comes up it is BLACK on DVI and BLACK on vga
[15:37] <No_Wifi> :doji I tried sudo ifup wlan0. Gives 'Ignoring unknown interface wlan0=wlan0.'
[15:37] <doji> :No_Wifi hm, well the easy way didn work. So you might have some work configuring the wifi. You can reference this page: https://help.ubuntu.com/community/NetworkConfigurationCommandLine/Automatic#Wireless
[15:37] <wafflejock> !nomodeset | gnu_
[15:38] <wafflejock> gnu_, you may want to use that boot param so you can get back to the graphical interface using just basic drivers then can try clearing out any installed drivers and just use the additional drivers dialog to install the nvidia packages
[15:39] <gnu_> ubottu: the splash screen works, it only goes black when X comes up
[15:39] <gnu_> wafflejock: im on ubuntu 8.04.4 LTS
[15:39] <gnu_> there is no additional drivers dialoge
[15:39] <wafflejock> gnu_, version isn't supported anymore
[15:39] <No_Wifi> :doji Okay I'll try that then. Seems like a lot of work.
[15:39] <gnu_> never the less It is above the minimum for the nvidia driver
[15:40] <gnu_> http://us.download.nvidia.com/XFree86/Linux-x86/367.57/README/minimumrequirements.html
[15:40] <doji> :No_Wifi , the nice thing about linux is that usually with some work you can actually fix the problem :) and after a while you start enjoying the process
[15:40] <gnu_> Linux version 2.6.24-32
[15:40] <gnu_> X.Org X Server 1.4.0.90
[15:40] <gnu_> module-init-tools version 3.3-pre11
[15:40] <gnu_> ldd --version  :  ldd (GNU libc) 2.7
[15:40] <gnu_> /usr/local/lib/libvdpau (version 0.2)
[15:40] <gnu_>  
[15:41] <MonkeyDust> gnu_  next time, use a !pastebin
[15:42] <jelly> 2.6.24 is a horribly old kernel from like 2009.  Expecting a card from 2014-ish to work well is not reasonable
[15:42] <wafflejock> gnu_, https://wiki.ubuntu.com/Releases support ended May of 2013 if you are installing your own source then you'll have to deal with issues, don't drop multiple lines here like MonkeyDust said just use a paste site or ubuntu forums or the ubuntu stack sites
[15:42] <MonkeyDust> jelly  what's the output of    cat /etc/issue
[15:42] <gnu_> wafflejock: I cant deal with the issues
[15:42] <jelly> MonkeyDust: I'm talking about gnu_'s system.
[15:42] <gnu_> I can't get it to fucking work
[15:42] <gnu_> there is no error in Xorg.0.log
[15:42] <MonkeyDust> gnu_  mind your language
[15:42] <gnu_> nothing in dmesg
[15:42] <doji> oh btw, No_Wifi. If you are not to keen on the ubuntu version you are using. Try and see if a more up to date livedisk autodetects the interface. (run in preview mode)
[15:43] <gnu_> MonkeyDust: cunt
[15:43] <gnu_> bet you're a hillary voter
[15:43] <gnu_> voting for a fucking cunt
[15:43] <gnu_> fuck you
[15:43]  * jelly already had to +q them in #debian
[15:43] <wafflejock> gnu_,  your method of searching for help is mind numbing
[15:43] <wafflejock> gnu_, good luck
[15:43] <gnu_> wafflejock: I allready asked here
[15:43] <gnu_> no one could help
[15:43] <gnu_> no error msgs
[15:43] <MonkeyDust> gnu_  glad i could help, your humble servant *bow*
[15:43] <gnu_> just a black screen
[15:43] <Sircle> how to see how many mice and keyboards I have?
[15:43] <gnu_> dmesg says all is wel
[15:44] <gnu_> xorg log says everythings working great
[15:46] <all-clouds> hello! I've upgraded recently to 16.04 (32 bit) and for some reason every boot takes very long time (I've got SSD)... I noticed that on one of the windows (CTRL+ALT+1 or 2... up to 7) shows that there are inode checks and clean ups... anyone could give me a hint of what is happening? How to fix this slow boot?
[15:49] <ikonia> all-clouds: define "long time"
[15:49] <akik> all-clouds: have you checked dmesg for errors?
[15:49] <ikonia> all-clouds: your file systems get checked either upon error or ever certain ammount of mounts,
[15:49] <ikonia> you could just be seeing a file system check
[15:51] <all-clouds> ikonia: long time... maybe 1 minute or 2? I did not time is :) I just know it used to boot up in seconds and now I can go and do a banana shake and come back to a booted system
[15:51] <VN7> anyone here can tell me my ubuntu 16.04 have wrong time and date and no wifi, but gets it on restart???
[15:52] <all-clouds> akik: yes, I did check, and found no errors... any way to do this automatically? not needing to read all the logs? like grep "error" ?
[15:52] <ikonia> all-clouds: remove the boot splash and watch the boot up
[15:52] <ikonia> all-clouds: see exactly what is going on
[15:53] <all-clouds> ikonia: see a file system check @ each boot? (I knew there are file system checks every once in a while, however this happens each time)
[15:53] <ikonia> all-clouds: so that suggests your file system is being corrupted
[15:54] <ikonia> look at the shutdown process
[15:54] <all-clouds> ikonia: how can I remove the boot splash?
[15:54] <ikonia> all-clouds: modify the grub boot, or just hit escape when you see it start to display the boot splash
[15:55] <all-clouds> before I reboot, is there any other way to see what happened at boot time? to see if there was a file system check and why it happens each time?
[15:56] <ikonia> all-clouds: what is the problem with hitting "escape"
[15:56] <ikonia> why would you not use that
[15:56] <all-clouds> ikonia: I will, sure thing :) I am just happy the system is now running and feel awkward to have to restart it :)
[15:56] <Sircle> there was a utility that detected mouse/keyboard etc when pluged (live). Can anyone recall?
[15:57] <ikonia> all-clouds: you feel awkward hitting the reboot menu
[15:57] <ikonia> all-clouds: but yet you want to know why it's slow booting. you may need to assess your approach to troubleshooting
[15:57] <wafflejock> all-clouds, there are packages that will record all the boot up sequence info and show you a graph of the timing of everything but need those installed before the boot I believe
[15:58] <wafflejock> !info bootchart | all-clouds
[15:58] <wafflejock> !info bootchart xenial | all-clouds
[15:58] <all-clouds> akik, ikonia: thank you for now! let's see the boot
[15:58] <all-clouds> wafflejock, ubottu: thank you!
[15:58] <wafflejock> hmm apparently isn't in yakkety no prob
[15:59] <ioria> all-clouds, you can check /var/log/boot.log   ;   you can run   systemd-analyze blame  or boot in text mode
[15:59] <for{}> man systemd-analyze
[15:59] <ikonia> he doesn't need any of that
[15:59] <ikonia> he just needs to boot and see what triggers the file system check
[15:59] <for{}> systemd-analyze plot will generate a svg
[15:59] <ikonia> is it an unclean disk, a time based check, an incosistency etc,
[15:59] <carbine> So I have narrowed down my suspend issues to my graphics driver.
[16:00] <carbine> If I wake from suspend while using mesa, no issue. If I wake from suspend using nvidia-340, issues.
[16:00] <for{}> ikonia, could you recommend me a dark theme for 16.10?
[16:00] <ikonia> for{}: no
[16:05] <gnu_> my gt730 won't output to vga after X is init, just black screen (Both VGA and DVI). Once screen goes black, can connect to SSH, but won't create shell.
[16:05] <gnu_> something to note: with X not on I can ssh in. Once X is on and goes black, I get an SSH greeting, password prompt, but when I enter the password never a login: it hangs.
[16:05] <ikonia> gnu_: if it won't create a shell, thats unlikley something to do with X
[16:05] <ikonia> gnu_: look in the auth log and xsesion errors log
[16:06] <all-clouds> ikonia: hello again & thx for the 'escape' tipp... I saw: "A start job is running for dev-disk-by\x2duuid-****.device ----- and it took 1min 30 sec
[16:06] <ikonia> all-clouds: did you not get any more detail than that ?
[16:07] <all-clouds> ikonia: nope... as soon as that finished, the system booted up in seconds
[16:07] <gnu_> ikonia: where is the xsession errors log?
[16:07] <gnu_> I found the auth log
[16:07] <ikonia> gnu_: in your home dir
[16:07] <ikonia> gnu_: also look at the system xorg log
[16:07] <all-clouds> ikonia: I did restart twice and the same thing happened
[16:07] <ikonia> all-clouds: look at the boot log see if that goes into more detail,
[16:07] <ikonia> all-clouds: this is just an SSD right ?
[16:07] <ikonia> all-clouds: not raid or anything like that
[16:08] <gnu_> system xorg log says nothing
[16:08] <ikonia> gnu_: it has no "EE" line
[16:08] <akik> all-clouds: you could run the smartctl from smartmontools to check whether it reports any problems
[16:09] <ioria> i bet on swap or a disk partition  ; ls -l /dev/disk/by-uuid
[16:10] <addtru> Please provide some recommendations on the following situation: I did install Linux Mint 18 KDE. While configuring a DSL connection, it was connecting and disconnecting continuously. “sudo apt-get update” resulted in ”waiting for headers” for a very long time for each repository. “sudo ping www.google.ro –c 3” resulted in “0% loss”. Another weird thing is that on Firefox, no Internet address is working, except Facebook,
[16:10] <addtru>  which is working fine, and Google, which is working very limited (I can have search results, but clicking on any of the results does not work). I had these issues also on installations of Kubuntu 16.04 and Kubuntu 16.10, and on two different computers (fairly old, but still working, one desktop computer with 4 GB of RAM, and a Toshiba satellite with only 1 GB RAM). For the moment I did fall back on the old Linux Mint 17.3 KDE, where eve
[16:10] <addtru> rything is working smoothly. Thank you! Best regards, Adrian Romania﻿
[16:10] <ikonia> addtru: we don't support mint here, sorry
[16:11] <all-clouds> ikonia: yes, it's a simple and only one SSD (which run well with ubuntu 12.04 on 32 bits)
[16:11] <ikonia> all-clouds: ok, so as ioria says look at the disk uuid (you'll see it the fstab) and see what file system is the problem
[16:11] <jamesl> gnu_▸ why can't you upgrade?
[16:12] <all-clouds> ikonia: I've read through boot.log, I could see no errors... what should I look for in there really? (it's not that long)
[16:12] <gnu_> (EE) Failed to load module "type1" (module does not exist, 0)
[16:12] <gnu_> ikonia: that's the only one
[16:12] <jamesl> but why aren't you upgrading to a more recent distro
[16:12] <jamesl> ?
[16:12] <ioria> all-clouds, can you paste ls -l /dev/disk/by-uuid      and /etc/fstab ?
[16:12] <gnu_>  Xorg.0.log (should it be Xorg.log? that doesn't exist, just the .0. etc)
[16:13] <addtru> ikonia:   mint is based on ubuntu, that is why I asked
[16:13] <ikonia> gnu_: why is something linked against /usr/local
[16:13] <ikonia> gnu_: I was just reading your scroll back, nothing in ubuntu is /usr/local
[16:13] <ikonia> addtru: try the mint support channel
[16:13] <gnu_> ikonia: I had to install libvapau 0.2
[16:14] <gnu_> compile, make , make install
[16:14] <gnu_> it put it in /usr/local/lib iirc
[16:14] <ikonia> gnu_: what video module is being loaded
[16:14] <ikonia> as in xorg video card module
[16:14] <gnu_> ikonia: how do I find that out?
[16:14] <ikonia> gnu_: what video card module/driver did you configure it to use
[16:14] <gnu_> xorg.config ?
[16:14] <gnu_> I just had the nvidia driver install do it
[16:15] <Sircle> I am few commands away from setting up a multiseatx. Can anyone help? https://pastebin.mozilla.org/8923118
[16:15] <ikonia> gnu_: how did you install the nvidia driver
[16:16] <gnu_> http://pastebin.ca/3734031
[16:16] <gnu_> ikonia: chmod 755 NVIDIAblablabla370.bla.run
[16:16] <gnu_>  ./NVIDIAblablabla370.bla.run
[16:16] <ikonia> so you pulled it direct off the internet rather than the ubuntu supported builds/versions
[16:17] <gnu_> as always for the last many years
[16:17] <ikonia> so you've got 3rd party modules you compiled and direct bleeding edge nvidia modules from the internet
[16:17] <gnu_> my ubuntu version doesn't have any driver widget
[16:17] <ikonia> gnu_: what ubntu versions is this ?
[16:17] <gnu_> 8.0.4.04
[16:17] <gnu_> LTS
[16:17] <ikonia> ooh, unsupported
[16:17] <ikonia> I missed that, sorry, I'm out, we won't support 8.04 any more
[16:18] <gnu_> I will take this as a personal insult
[16:18] <ikonia> ok
[16:18] <gnu_> ikonia: if I ever meet you
[16:18] <ikonia> it's not, but ok
[16:19] <gnu_> and since I cannot develop my game anylonger
[16:19] <gnu_> this too, I will lay at your feet
[16:19] <ikonia> ok
[16:19] <gnu_> it is your choice
[16:19] <ikonia> ok
[16:19] <ikonia> 8.04 is unsupported,
[16:19] <gnu_> it doesn't matter to me
[16:19] <gnu_> you will not help me
[16:19] <ikonia> it does to this channel
[16:19] <gnu_> it doesn't matter to me
[16:19] <ikonia> we only support current 'in support' official ubuntu releases
[16:19] <gnu_> this is a matter between you and I
[16:19] <ikonia> sorry
[16:20] <gnu_> and you dissapoint me
[16:20] <gnu_> you are not sorry
[16:20] <gnu_> yet you use the word lightly
[16:20] <ikonia> lets leave it there,
[16:20] <gnu_> perhaps you will be made to know what it is like to feel regret
[16:20] <gnu_> and then you will say the word again, but it will have no meaning to the ears that hear it, as you have previously abused it
[16:21] <ikonia> gnu_: enough now please
[16:21] <gnu_> like a boy crying wolf.
[16:21] <gnu_> I just want my screen to not be black.
[16:21] <gnu_> and to beable to continue to develop my opensource game.
[16:21] <ikonia> gnu_: I appreciate that,  but you need to move to a supported official ubuntu version
[16:21] <ikonia> other than that, this channel can't help you
[16:21] <destini> what the fuck is going on here?
[16:21] <ikonia> destini: please don't swear
[16:21] <gnu_> destini: nvidia
[16:21] <gnu_> nvidia drivers not working
[16:22] <ikonia> gnu_: enough, we are not supporting 8.04 here, please stop
[16:22] <gnu_> no, I want this to work
[16:22] <gnu_> 8.04 worked fine forever, and it meets the minumum requirements:
[16:22] <gnu_> http://us.download.nvidia.com/XFree86/Linux-x86/367.57/README/minimumrequirements.html
[16:22] <destini> can i use 'heck' for what i said earlier...?
[16:22] <destini> what the heck?
[16:22] <ikonia> !topic | destini
[16:22] <ikonia> !guidelines | destini
[16:23] <destini> I have my own channel, and my own topic too...
[16:23] <destini> Dont teach me
[16:23] <destini> Idiot...
[16:23] <kk4ewt> gnu_,  so it doenst matter to you that if you did create your game no one else could use it
[16:24] <ikonia> kk4ewt: he's muted, he can't speak any more,
[16:24] <ikonia> let it go
[16:24] <kk4ewt> yes sir
[16:24] <ikonia> thanks
[16:30] <all-clouds> ioria, ikonia: I have two partitions, sda1 (ext4) adn sda5 (swap) and in the message I saw @ boot time "A start job is running for dev-disk-by/x2duuid" the uuid is the one for the swap partition (4 GB)
[16:30] <ioria> all-clouds, can you paste ls -l /dev/disk/by-uuid      and /etc/fstab ?
[16:30] <ikonia> all-clouds: ok, comment out the swap partition in fstab, and reboot
[16:30] <ikonia> (you can do ioria's request first if you want)
[16:31] <ioria> all-clouds, you can run sudo blkid to check the uuids, or you can change the uuid with the sdax
[16:33] <all-clouds> ioria: ls -l /dev/disk/by-uuid gives       lrwxrwxrwx 1 root root 10 Oct 29 17:01 92386387-1cda-4da2-aae7-525dec26b285 -> ../../sda5         lrwxrwxrwx 1 root root 10 Oct 29 17:01 9658f381-e022-4f56-b2bb-b493ccdc4c3b -> ../../sda1
[16:33] <carbine> So I'm having an issue waking from suspend. The issue only happens when I'm using my nvidia drivers, and does not happen when using intel (via nvidia-prime). The issue happens when I wake from suspend via keypress. The monitor gets power, then goes to a black screen with a non-blinking cursor. Ctrl+alt+F[num] works but freezes on change.
[16:33] <mahakal_> hello guys,which light honeypot  machines can i try on my 4gb-500gb laptop?
[16:34] <ikonia> light honeypot machines ?
[16:34] <mahakal_> yeah,because i have 4gb ram in laptop
[16:34] <carbine> Acer Z5WAH, GeForce 820m using nvidia-340 (340.89)
[16:35] <ikonia> mahakal_: what is a light honeypot machine
[16:35] <ikonia> mahakal_: a honey pot can be something as simple as a web server
[16:35] <mahakal_> oh yes i mean software....
[16:36] <ikonia> mahakal_: just put a webserver up with some fake files on
[16:36] <all-clouds> ioria: and fstab has: # / was on /dev/sda1 during installation UUID=9658f381-e022-4f56-b2bb-b493ccdc4c3b /               ext4    errors=remount-ro 0       1           AND         # swap was on /dev/sda5 during installation UUID=48475cb9-b9b8-4670-94e9-0be1e7d2febe none            swap    sw              0       0
[16:36] <snfgf> guys
[16:36] <mahakal_> light means which doesnot consume system resources.....
[16:36] <snfgf> how do i connect to an open wifi network from the command line?
[16:36] <ioria> all-clouds, the swap uuid is wrong
[16:36] <ikonia> mahakal_: not going to get lighter than a web server
[16:37] <mahakal_> ok,,but is not there anything like this supported officially by linux
[16:37] <ioria> all-clouds, please, run sudo blkid and paste the result
[16:37] <ikonia> web servers are supported officially by linux
[16:37] <ioria> all-clouds, install pastebinit or go to paste.ubuntu.com
[16:38] <mahakal_> ok ikonia,,one more question
[16:38] <kosmos890> How do I upload files into /var/www/html using vsftpd? I was able to upload files only into my home
[16:39] <carbine> kosmos890: Directory permissions
[16:39] <mahakal_> can i use appache webserver  on normal ubuntu pc means not server edittion
[16:40] <carbine> http://paste.ubuntu.com/23398127/ - dmesg from suspend issues
[16:40] <wafflejock> mahakal_, yeah
[16:40] <MightyKing> How can i 'locate' in a specific directory?
[16:40] <jatt> mahakal_: yes but lighttpd is better as as small webserver
[16:40] <lordcirth> mahakal_, yes, Ubuntu Desktop and Server are mostly just different package sets.  Install whatever you want
[16:40] <lordcirth> MightyKing, use find
[16:41] <ikonia> mahakal_: yes
[16:41] <all-clouds> ioria: http://paste.ubuntu.com/23398129/
[16:41] <ikonia> mahakal_: the fact that you are asking these quetions suggests you are not ready to hold a honey pot
[16:41] <jatt> !info lighttpd
[16:41] <mahakal_> ikonia..."you are never ready until someone give you a push"
[16:41] <ikonia> mahakal_: no
[16:42] <ioria> all-clouds,  you may need to edit /etc/fstab and replace, for sda5 swap' the uuid with that : UUID="92386387-1cda-4da2-aae7-525dec26b285"
[16:42] <ikonia> you don't seem to understand the basics of using your machine
[16:42] <ikonia> but thats up to you
[16:42] <MightyKing> lodrcirth how the syntax look like?
[16:43] <mahakal_> ikonia,i am a student ....so i do not fear from any virus or trozan ......
[16:44] <ikonia> mahakal_: you appear to be saying random words
[16:44] <mahakal_> yeah ,i am ,But it would be very kind if you would suggest me something important
[16:44] <ikonia> mahakal_: I've already told you what to do ?
[16:45] <ikonia> what more "important" do you want ?
[16:45] <id> hello?
[16:45] <ikonia> hello id
[16:45] <mahakal_> like any book ,website to follow...
[16:45] <all-clouds> ioria: thanks, fingers crossed :D rebooting
[16:46] <ikonia> mahakal_: about what ?
[16:46] <all-clouds> ikonia: thank you too!
[16:46] <ioria> ok
[16:46] <ikonia> all-clouds: ioria hooked you up, he's your man here
[16:46] <ioria> b_b
[16:46] <mahakal_> regarding learning about malware analysis stuff..
[16:46] <numnum> hi
[16:47] <ikonia> mahakal_: this channel is for ubuntu support, sorry
[16:47] <mahakal_> hahah..ok..thanks you very much..have a good day
[16:47] <th0r> mahakal_, tldp.org
[16:47] <numnum> i am trying to download a torrent with transmission and whne i test the port it says closed.. what to change ti to/how to open the port/whare do i ask this questions
[16:48] <all-clouds> ikonia, ioria: many thanks! finally, no more waiting time :D
[16:49] <ioria> all-clouds, it's ok , you're welcome
[16:49] <all-clouds> ioria: thanks for the pastebinit too!
[16:49] <ioria> !paste | all-clouds
[16:49] <ioria> all-clouds,  you can also use cat file | nc termbin.com 9999
[16:50] <numnum> ^
[16:50] <all-clouds> ioria: I hope to keep that in mind, I have pastebinit for now :) thank you!
[16:50] <kosmos890> carbine: html folder has 755 permissions
[16:50] <ioria> all-clouds,  that's 'cause read outputs on the channel it's not easy
[16:50] <ioria> all-clouds,  no problems
[16:51] <mahakal_> quit
[16:52] <numnum> how to open ports?
[16:52] <ducasse> numnum: set up port forwarding on your router
[16:52] <Sircle>  following this https://2buntu.com/articles/1514/multiseat-in-ubuntu-1410/   got me this with "..."  what should I do with inappropriate addres?  /sys/devices/pci0...00:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C00C.0013/input/input29
[16:52] <numnum> i am using my phone for wifi and it says 51413 is closed on the transmission network tab
[16:53] <numnum> i use linux no firewall
[16:53] <numnum> idreas?
[16:53] <wafflejock> numnum, like ducasse said if you need the device to have data forwarded from your WAN IP on the router to some LAN IP you use port forwarding on the router, not an ubuntu issue though
[16:54] <numnum> i dont think youunderstand.. i do nto have any router involved... i use my phone hot spot
[16:54] <wafflejock> numnum, could be that the cell network blocks certain ports but linux itself isn't going to be blocking them by default
[16:55] <EmranEb> Hi everyone
[16:55] <lordcirth> EmranEb, hi
[16:55] <numnum> i will try to chnage ports...
[16:55] <EmranEb> whats going on here?
[16:56] <wafflejock> EmranEb, this is just a support channel
[16:56] <EmranEb> good
[16:56] <wafflejock> EmranEb, if you have issues or want to help this is the place
[16:56] <EmranEb> no im want to just chat !
[16:57] <wafflejock> EmranEb, can check out the #ubuntu-discuss or #ubuntu-offtopic chat
[16:57] <numnum> it says port 80 is closed as well
[16:57] <jmadero> what's the name of the sound applet in Ubuntu 16.04?
[16:57] <ioria> 80 is apache iirc
[16:57] <wafflejock> ioria, yeah just web in general
[16:57] <numnum> 80 is http no?
[16:58] <ioria> i see
[16:58] <wafflejock> when you use a browser it is port 80 by default
[16:58] <lordcirth> numnum, to clarify, you are trying to access ports on your Ubuntu system, from where?
[16:58] <ducasse> numnum: are you running a web server?
[16:58] <unixuser> I have a kernel oops with the nvidia driver when it starts up: http://pastebin.ca/3734039    card: gt730. Happens when X turns on, screens go blank
[16:59] <numnum> i am trying to download torrents form my transmission application on my ubuntu ,echine on my laptop that gets his wifi form a hot spot form my g3...
[16:59] <lordcirth> numnum, ok, then your g3 is running NAT and you'll need to port-forward on there, and we can't help you with your phone.
[16:59] <numnum> i am not runing a web server
[17:00] <ducasse> numnum: then port 80 would be closed anyway.
[17:00] <lordcirth> And that's assuming that your carrier doesn't firewall that, which they might
[17:00] <numnum> how tha fuk do i port forword on a phone :P
[17:00] <ducasse> numnum: watch your language
[17:01] <unixuser> Linux version 2.6.24-32,  X.Org X Server 1.4.0.90,  module-init-tools version 3.3-pre11, ldd --version  :  ldd (GNU libc) 2.7, /usr/local/lib/libvdpau (version 0.2)
[17:02] <lordcirth> numnum, I've no idea, and personally I wouldn't try.  You can still torrent without port forwarding, it's just a bit slower to start up.
[17:02] <bimolin> uhm is this the support chat of Ubuntu?
[17:04] <ducasse> bimolin: yup
[17:04] <unixuser> I have a kernel oops with the nvidia driver when it starts up: http://pastebin.ca/3734039    card: gt730. Happens when X turns on, screens go blank
[17:04] <numnum> the thing is my torrents dosnt even start up
[17:04] <helllojesus12> Hi can someone help me with tomcat installation?
[17:05] <helllojesus12> !pastebin ● tomcat7.service - LSB: Start Tomcat.
[17:05] <helllojesus12>    Loaded: loaded (/etc/init.d/tomcat7; bad; vendor preset: enabled)
[17:05] <helllojesus12>    Active: active (exited) since Sat 2016-10-29 12:48:51 EDT; 15min ago
[17:05] <helllojesus12>      Docs: man:systemd-sysv-generator(8)
[17:05] <helllojesus12> Oct 29 12:48:51 lola-is-great systemd[1]: Started LSB: Start Tomcat..
[17:05] <helllojesus12> Oct 29 12:50:10 lola-is-great systemd[1]: Started LSB: Start Tomcat..
[17:05] <bimolin> Oh great! Well hello everybody! Hope you are having a good day. So, I need your help with installing Lubuntu on my old notebook.
[17:05] <ducasse> !paste | helllojesus12
[17:06] <ducasse> bimolin: what's the problem?
[17:06] <unixuser> mtn: I have been a debian user and game dev for 10 years
[17:06] <helllojesus12> http://paste.ubuntu.com/23398238/
[17:06] <helllojesus12> This is the error I see when I start to tomcat7
[17:07] <helllojesus12> I had to manually change the jvm dir in /etc/init.d/tomcat7
[17:08] <bimolin> Ok, I used a usb for the install. Made it bootable with UBDC. So I plug it, choose to boot from USB then choose Install option. So the install window pops. When I reach the tab to enter my Id and password it crashes with an error : malformed line 1 in source list
[17:09] <wafflejock> bimolin, sounds like maybe a corrupt download/transfer to the USB
[17:09] <ducasse> bimolin: iirc, there is a "check install media for defects" option on the boot menu, can you try that?
[17:10] <bimolin> Right away!
[17:11] <bimolin> wafflejock : Thats what I thought too, wanted to try everything else before starting all over again
[17:12] <bimolin> ducasse: Check finished, found 1 file with error
[17:13] <ducasse> bimolin: ok, try writing the usb again
[17:27] <Xtreme> Guys, I have a interesting problem. Short version "Can i extend my monitor on mirror mode over network"? Long Version: I have a linux machine which is connected to projector, i would like to cast/mirror my desktop on that projector remotely, how can i do it?
[17:28] <akik> Xtreme: maybe with a google cast dongle?
[17:28] <bimolin> ducasse: So finished with writing the usb again, check for errors, found 1 again.
[17:28] <Xtreme> akik, dont want to purchase anything...
[17:29] <Xtreme> I am sure atleast one tool will be there in linux to do that.
[17:29] <akik> Xtreme: ok maybe some remote desktop client running on the projector connected machine that connects to your other machine
[17:29] <ducasse> bimolin: could be a bad download. either download again or try another usb.
[17:30] <bimolin> ducasse: I downloaded it from the official site, torrent one. Should I try something else besides torrent?
[17:30] <wafflejock> Xtreme, basically what akik said here http://serverfault.com/questions/100174/clone-a-xorg-session-remotelly
[17:30] <helllojesus12> Hi, can someone help me with a tomcat7 installation? I have tried multiple times by reinstalling, clearing all the libraries, messing with /etc/init.d/tomcat and tomcat7.service files...
[17:30] <helllojesus12> I am still getting the same error when I try to start a service.
[17:30] <ducasse> bimolin: hmm, torrent should be checked automatically. do you have another usb stick?
[17:30] <wafflejock> Xtreme, honestly if the projector has HDMI chromecast are like $30 and would be less power hungry than most machines but just depends on how much you plan to use it if it's worth it
[17:30] <akik> Xtreme: x2go is pretty nice for remote desktop connections
[17:31] <bimolin> ducasse: Yep, I'll try on another usb
[17:31] <Xtreme> is there any option where i dont have to log into the projector machine and connect to host?
[17:32] <Xtreme> more like just "cast" it?
[17:32] <Xtreme> Say, i have some projector server installed.
[17:33] <phenom> Has anyone noticed issues with x applications freezing under 16.04?
[17:33] <Xtreme> and i am just connecting to it from client machine and extendint display.
[17:33] <phenom> I have multiple laptops and at least 2 of them keep freezing up on me.
[17:33] <phenom> 14.04 was fine
[17:33] <wafflejock> Xtreme, I've seen programs setup to run remote displays but typically just accept video or image uploads to be shown don't think I've seen one that casts a screen
[17:34] <someone235> hi, I ran this cmd: iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3000 , but I still can't get response from port 80. When I run "curl localhost:3000" I get response. Someone has an idea?
[17:34] <Xtreme> someone235, you cannot have NAT on localhost.
[17:34] <Xtreme> wafflejock, hmm.
[17:35] <Xtreme> wafflejock, akik i think x2go can do it.
[17:35] <phenom> 16.04 has been nothing but problems
[17:35] <wafflejock> Xtreme, actually my octopi setup is using some mjepstreamer to stream something I can load in VLC that works ok but just comes from a webcam not sure it can capture desktop
[17:36] <Xtreme> wafflejock, interesting..
[17:36] <Xtreme> can we give it a try?
[17:37] <wafflejock> Xtreme, hmm looks like the package isn't part of the ubuntu repos and I'm not seeing an input type for it for getting the video from the desktop anyhow actually it's here if you're curious https://github.com/jacksonliam/mjpg-streamer
[17:38] <kirkins> Does anyone know how updating the official ubuntu PPA works? For example I'm looking at a program that is updated on 16.10 branch but not 16.04. Is it a matter of testing that the new versions of programs work before updating them?
[17:38] <jatt> don't mix repositories
[17:38] <kirkins> I don't want to I'm asking about the governance process
[17:39] <Xtreme> akik, okay. x2go doesnt work for me
[17:40] <Xtreme> i cannot mirror display over ssh?
[17:40] <kirkins> @Xtreme sry if you already know this but I didn't see what you said before. x2go doesn't work with unity
[17:40] <kirkins> actually one of the reasons I stopped using unity
[17:41] <Xtreme> kirkins, :) i am not using unity
[17:41] <Xtreme> But no, this is not what iw ant.
[17:41] <Xtreme> i want to cast my display.
[17:45] <Xtreme> wafflejock, http://serverfault.com/questions/100174/clone-a-xorg-session-remotelly
[17:45] <Xtreme> can i automate the process on projector machine via ssh?
[17:46] <ubuntu-mate> hihi
[17:46] <ubuntu-mate> hi everyone?
[17:46] <ubuntu-mate> do you know kimchi?
[17:47] <phako> hello. Since I upgraded to 16.10 I get random shutdowns with no visible reasons in journal whatsoever... it seems to be a bit more stable when going back to 16.04's 4.4 kernel. anyone heard of that before? Can't find anything on the interwebs :-/
[17:48] <jatt> random shutdowns might be caused by faulty hardware
[17:48] <phako> jatt: thought that would be a weird coincidence with the upgrade
[17:49] <phako> but right, I could probably start with a memory check
[17:49] <jatt> yes that would be good
[17:49] <hz_> Hi, I need to login in ubuntu 16.10 through root account while startup
[17:50] <hz_> any help from u guys ?
[17:52] <OerHeks> hz_, root account is disabled in ubuntu, why do you *need* that?
[17:53] <jatt> hz_: read this https://help.ubuntu.com/community/RootSudo
[17:53] <OerHeks> yeah, wreck your system :-D
[17:55] <Xtreme> Would it be funny if a hacker hacks into a root account of a server only it find its fully jailed?
[17:55] <Xtreme> he cant do anything other then "Echo"
[17:55] <Xtreme> he cant do anything other then "Echo"
[17:55] <bumblefuzz> can anyone shed light on the security of installing and using java?
[17:56] <jatt> no security concerns
[17:56] <Xtreme> Yup, it non-existent.
[17:56] <OerHeks> bumblefuzz, use the openjdk version from our sources, that is safe.
[17:56] <OerHeks> not that java is safe, but installing is.
[17:57] <Xtreme> OerHeks, isnt openjdk slower in performance?
[17:57] <Xtreme> also, things like "openfire" dont work on openjdk, but they do on java
[17:57] <bumblefuzz> this is what I'm being asked to install: https://www.java.com/en/download/windows_offline.jsp
[17:57] <OerHeks> Xtreme, i have no info on that
[17:57] <bumblefuzz> I've always heard how notorious java is for poor security
[17:58] <bumblefuzz> and how they recently decided to discontinue web support or something
[17:58] <OerHeks> bumblefuzz, that is windows, you are in the ubuntu linux support channel
[17:58] <Xtreme> bumblefuzz, are you new to Linux?
[17:58] <bumblefuzz> no, I know how to install the linux equivalent
[17:58] <Xtreme> and bumblefuzz, you are mixing things up.
[17:58] <bumblefuzz> I was just pointing to what I was being asked to install
[17:58] <jatt> there is no exploit out there in java that gives you root privileges, so from that's standpoint  it's secure
[17:59] <bumblefuzz> since I'm unfamiliar with the security aspect of things
[17:59] <OerHeks> bumblefuzz, oke, then do not mix windows stories with linux
[17:59] <Xtreme> bumblefuzz, windows is insecure
[17:59] <Xtreme> everything that runs on windows is insecure
[17:59] <bumblefuzz> so it's nothing to do with java then?
[18:00] <Xtreme> jatt, what if there is a kernel vulnerability?
[18:00] <OerHeks> oracle java binairy blop perhaps, we support openJDK
[18:00] <bumblefuzz> I see
[18:00] <bumblefuzz> so I'm secure installing OpenJDK, basically
[18:01] <bumblefuzz> right?
[18:02] <OerHeks> yes, there is a nice java wiki too
[18:02] <OerHeks> !java
[18:03] <bumblefuzz> and can you clarify what you meant by saying that java isn't necessarily safe but installing is?
[18:04] <bumblefuzz> in other words, what other security considerations should I look at before installing java?
[18:05] <jatt> you can configure the level of security (restrictions) for java applications, so if you have concerns you can set a very high security level, see https://www.java.com/en/download/help/jcp_security.xml
[18:09] <jwarren_> Hey folks, I'm slightly confused. I'm running an old desktop as a media server. I just installed Nginx to proxy the media server. I stopped the apache2 service and started Nginx, but on port 80 I'm somehow still getting the apache2 "welcome" page. Is there something else that I need to disable? Nginx is successfully running without errors on port 80. I'm stumped.
[18:11] <Frankyone> heja
[18:12] <Frankyone> gents any nice radius server that I can install on ubuntu?
[18:12] <Walex> jwarren_: use 'lsof -i tcp' to see which proceesses have port 80 in LISTEN state.
[18:12] <jatt> !info radiusd-livingston
[18:13] <Walex> Frankyone: several, just do 'apt-cache search radius'
[18:13] <ro63r1> what is the comand for installing chrome
[18:13] <MonkeyDust> !find chrome
[18:14] <MonkeyDust> ro63r1  i's not oin the repos, you i guess you need an external source, not a command
[18:14] <jwarren_> Walex: Ahh, I think it was Chrome caching the Apache page. I just did another refresh and it's showing the Nginx page. Thanks!
[18:15] <ro63r1> I have dounloaded it but it will not let me install it
[18:15] <ro63r1> monkeydust
[18:17] <nicomachus> ro63r1: did you apt-get update?
[18:18] <ubuntu899> sudo logkeys -s ceases to function once the computer is shut down.  How can I fix this?
[18:21] <ubuntu899> Can someone help with the logkeys command?  It ceases to function once the computer has been shut down.
[18:22] <OerHeks> ubuntulog, really?
[18:23] <Frankyone> gents
[18:23] <Frankyone> I noticed that the keyboard does not match
[18:23] <Frankyone> how can I change it?
[18:24] <my-friend> Hello, how do I remove xfce4 including all the dependencies that where installed during install ? Something more effective than apt-get remove --purge xfce* . . .
[18:25] <lordcirth> Frankyone, are you running it manually or enabling it in systemd?
[18:26] <ro63r1> just did nicomachus
[18:27] <knob> Hello, I am trying to install a hp printer.   I downloaded the HPLIP automatic installer.  Ran the script, and it's telling me that I am missing pyqt5-dbus and pyqt5   .... can I install these manually?
[18:27] <OerHeks> my-friend, what desktop do you want left, removing one can be a pain, there are different howtos like http://www.psychocats.net/ubuntucat/pure-kubuntu-15-10/
[18:27] <MonkeyDust> my-friend  is this useful http://www.psychocats.net/ubuntu/pureubuntu
[18:28] <ducasse> knob: why not just install the hplip package from the repos?
[18:28] <knob> ducasse, .... with.... apt install hplip?
[18:28] <akik> my-friend: i think there's a nicer way to do it but i went to /var/log/apt/history.log and read the file. it lists all the packages that were installed at one installaton time
[18:28] <ducasse> knob: yes
[18:29] <knob> ducasse, ok... trying it in a sec
[18:29] <ro63r1> it sais that it is waiting to install
[18:29] <my-friend> Thanks guys!
[18:31] <akik> my-friend: maybe "apt-get remove --auto-remove packagename"
[18:31] <knob> ducasse, it's telling me it's already the newest verion...   yet the printer doesn't "print".   It shows up on this machine, yet print Test Pages go into nothingness.
[18:31] <OerHeks> he is crossposting in #debian, haha
[18:32] <FlashWeb2k> http://ilredentore.dynv6.net/
[18:34] <imran-ubuntu> hi
[18:34] <imran-ubuntu> i need to install libpng12-0
[18:34] <imran-ubuntu> any idea how?
[18:35] <OerHeks> it is part of libpng iirc
[18:35] <OerHeks> !info libpng
[18:36] <OerHeks> !info libpng xenial
[18:36] <ducasse> !info libpng12-0
[18:37] <OerHeks> current is 16-16
[18:37] <OerHeks> !find libpng
[18:37] <ioria> libpng12-0 is for trusty
[18:38] <ioria> !info libpng12-0 trusty
[18:48] <ausjke_> on ubuntu 16.04 my desktop now has issue with mouses, on average every 10 clicks there are about 3 clicks are not recorded, so I have to keep clicking. this happens in recent weeks and yes I tried various usb mouses.
[18:49] <imran-ubuntu> where shall i find this libpng12-0 to install?
[18:49] <ausjke_> running "xev" to test and it's the same, i.e. 30% clicks are missed, sucks
[18:49] <ausjke_> never had this issue in all other ubuntu releases in the past
[18:50] <carbine> Is anyone here willing to suffer through debugging suspend issues with me? :P
[18:54] <Sonny_> Hello
[18:54] <Guest69696969> ausjke_, does this behaviour occur when you boot from a live distro?
[18:54] <Sonny_> I'm trying to install Ubuntu but keep getting the error message "Invalid ROM contents" could anyone help me?
[18:55] <Sonny_> Im super new to Linux in general and am lost
[18:55] <Guest69696969> Sonny_, radeon video?
[18:55] <Sonny_> I've got a Radeon video card, yes
[18:55] <Sonny_> R9 380 to be exact
[18:55] <Sonny_> and fx 8350 at 4.0, cpu.
[18:56] <Guest69696969> Sonny_, have you tried nomodeset at boot as an option?
[18:57] <linocisco> Libre office Calc has bug after full screen mode
[18:57] <Sonny_> Guest69696969: No, I haven't. Where do I select that option? In the BIOS? I currently am on Windows 10
[18:57] <ausjke_> Guest69696969: don't know, have not used livecd for years...
[18:58] <Guest69696969> no, when you first boot ubuntu(from dvd/usb) hold down shift(I think) and it will prompt you. then you should see F6 to change options
[18:58] <ausjke_> i am pretty sure it's new, like in 4 weeks at most
[18:58] <Guest69696969> Sonny_, see this post...second reply. https://ubuntuforums.org/showthread.php?t=1613132
[18:58] <Guest69696969> ausjke_, then go try it and determine if it happens there
[18:58] <ausjke_> this mouse problem is driving me crazy, in fact I just crashed one as it drove me out of control, i had to click multiple times once a while
[18:59] <Guest69696969> ausjke_, another pc would be a worthy test too, incase your usb innards are failing
[19:00] <ausjke_> Guest69696969: i had windows as dual-boot but had not used it for 2+ years, will try mouse under windows to make sure it is not a usb-port issue
[19:00] <Guest69696969> ausjke_, try the live boot too. it will give you a strong clue
[19:00] <ausjke_> Guest69696969: curious, why? isn't it the same as installed
[19:01] <Guest69696969> im trying to help you
[19:01] <Guest69696969> or i can waste time typing out why.. :P
[19:01] <KingsQuest> is that what is this being logged does?
[19:02] <Sonny_> Guest69696969: so im seeing here that it says to change some options in the live CD pre-install and it does not even let me run Ubuntu off the flash drive
[19:02] <Sonny_> It gives me the same error when I try to boot from the flash drive
[19:02] <Guest69696969> Sonny_, so you're saying you don't get ANY video...at all? just boots then sudden error?
[19:02] <Sonny_> yeah
[19:02] <Sonny_> It's a black screen
[19:03] <Sonny_> I can show you the error, 1 sec
[19:03] <Sonny_> https://gyazo.com/a05d6ad4e396644bb49307ac05ea3935
[19:03] <Sonny_> Don't mind the crappy quality, phone pics aren't the best for me :(
[19:04] <Guest69696969> Sonny_, i think it has more to do with the error below
[19:04] <Ben64> indeed, whatever sdc is has a problem
[19:05] <Sonny_> Ahh, okay
[19:05] <Sonny_> So what exactly should I google?
[19:06] <Ben64> nothing, whatever drive sdc is is messed up
[19:06] <Guest69696969> Sonny_, possible the sata devices are faulty?
[19:06] <Guest69696969> Sonny_, sdc means /dev/sdc... a device in your rig
[19:08] <Netek> hi all, can somebody tell me if bash would be the correct use for creating a script that enables me to combine both https://easyengine.io/docs/commands/site/create/ and https://easyengine.io/docs/chroot-sftp-easyengine/ into 1 command?
[19:08] <Sonny_> Sata devices are fault?
[19:08] <cuddylier> Does anyone know how to 'su' into a user from root that doesn't have a passwd entry? I found a command earlier that did it but can't find it again.
[19:08] <Sonny_> Does that mean my sata cable..?
[19:08] <Sonny_> I recently just got a new SSD?
[19:08] <Sonny_> maybe that's it?
[19:08] <madd_step> Sonny_ maybe this will help? https://askubuntu.com/questions/228927/boot-failure-failed-command-identify-packet-device
[19:08] <Guest69696969> Sonny_, perhaps.. pull out all but one to test
[19:08] <Guest69696969> leave the one in you intend to install on
[19:08] <Guest69696969> then see if the error happens
[19:09] <Guest69696969> when i say pull out, i mean disconnect data cable. :)
[19:09] <Drugo> what's the name of the default gtk theme in ubuntu mate?
[19:10] <Guest69696969> Netek, looks that way yup.
[19:10] <ioria> Sonny_, how did you do the usb media ? i mean, with what program ?
[19:10] <Netek> Guest69696969
[19:10] <Sonny_> I used Rufus
[19:10] <ioria> ah, ok
[19:11] <Netek> Guest69696969 ok, I will take a look at bash coding and see if I can understand it enough to do what I need. Thanks
[19:11] <Guest69696969> Netek, those are simply lines meant for bash. putting them into a script should be straight forward
[19:11] <ioria> Sonny_, how may disks do you have on your system ?
[19:11] <Sonny_> 2
[19:11] <ioria> *many
[19:11] <Sonny_> 1tb HDD and 240 gb SSD
[19:11] <Sonny_> Nothing on the SSD yet
[19:12] <ioria> Sonny_,  so sdc is (probably) your usb
[19:12] <Netek> Guest69696969 I never scripted anything in bash before so I shall have a look and learn how this is done, thanks again
[19:12] <Sonny_> But Im using the usb to boot?
[19:13] <ioria> Sonny_,  yes, i guess
[19:13] <Sonny_> Is there a way to install the OS straight onto the computer without having to use a usb / cd ?
[19:13] <Sonny_> Because I already have everything backed up
[19:13] <Sonny_> Just need to install ubuntu
[19:13] <Guest69696969> Sonny_, yes. PXE. you shouldnt need to tho
[19:14] <Sonny_> well I mean
[19:14] <Sonny_> this isn't working for me so can I do that?
[19:14] <Guest69696969> Sonny_, try another usb stick?
[19:14] <KingsQuest> does that unbust
[19:14] <Guest69696969> your install media may be faulty hence the error
[19:14] <Sonny_> I've only got the one
[19:14] <Sonny_> :(
[19:15] <ioria> Sonny_, it's a desktop, right ?
[19:15] <Sonny_> So what is PXE?
[19:15] <Sonny_> Yeah
[19:15] <ioria> Sonny_, try to switch the sata cables
[19:15] <linocisco> Libre office Calc has bug after full screen mode
[19:15] <Sonny_> Switch them off?
[19:16] <Sonny_> you mean, unplug them?
[19:16] <ioria> Sonny_, yep, https://bbs.archlinux.org/viewtopic.php?id=174335
[19:16] <ioria> switch, not unplug :þ
[19:17] <Sonny_> Alright
[19:17] <Sonny_> Wait, switch?
[19:17] <Sonny_> So just get a new sata cable, you mean
[19:17] <Sonny_> or switch the ones from SSD and HDD?
[19:17] <cuddylier> How do I specify the shell when using 'su'?
[19:17] <ioria> Sonny_, no read #6 post
[19:17] <cuddylier> E.g. if I want to specify bash
[19:17] <Sonny_> okay
[19:18] <Guest69696969> i wager the thumb drive is faulty. if switching cables helps, great. but if it doesnt
[19:19] <Guest69696969> cuddylier, man su... its top entry
[19:19] <cuddylier> got it yep
[19:20] <KingsQuest> ubuntu mainline kernel get updates how often ?
[19:23] <Sircle> Is it possible to have multiseatx with a card of 4 ports (but one physical video card)? such as http://www.nvidia.com/object/product_quadro_nvs_450_us.html OR I have to have 4 different cards ?
[19:35] <calleM> Hello, i hope some1 is here to answer my questions. Its about AMD Drivers.
[19:36] <yoshimitsu> i have a quick question
[19:36] <Guest69696969> make it quick
[19:36] <yoshimitsu> i just installed ubuntu 16.04, right after i clicke don restart, it went to a blank screen and hung, so i manually restarted it
[19:36] <yoshimitsu> it works fine, it updated and everything
[19:36] <yoshimitsu> it reboots now too
[19:36] <yoshimitsu> just that initial reboot didn't work
[19:37] <Guest69696969> so it hasnt happened since?
[19:37] <yoshimitsu> any worries?
[19:37] <yoshimitsu> Guest69696969: no
[19:37] <Guest69696969> if its a one-off i wouldnt
[19:37] <yoshimitsu> :)
[19:37] <Guest69696969> yoshimitsu, you can disable the splash screen if you like. this way you can watch the logs as the system boots or shuts down.
[19:37] <yoshimitsu> k
[19:37] <yoshimitsu> how do i do that?
[19:38] <Guest69696969> sec...gotta remind myself
[19:38] <ioria> esc
[19:38] <yoshimitsu> ioria: hit escape?
[19:38] <ioria> yoshimitsu, yup
[19:38] <yoshimitsu> k brb
[19:38] <Guest69696969> uhh no
[19:39] <Guest69696969> thats only for one off... if you want it permanent until disabled esc wont cut it
[19:39] <Guest69696969> ah well. :)
[19:39] <calleM> I have AMD 7950 and using Ubuntu 16.04 , and i cant even use flgrx. And i think AMDGPU-Pro driver isnt still out there , what can i do now?
[19:40] <ioria> calleM, for now usinf radeon
[19:40] <ioria> *using
[19:40] <calleM> excuse me , but what do u mean with "radeon" is just brand from AMD.
[19:41] <ioria> calleM, it's the opensource, you are probably using now
[19:41] <nicomachus> calleM: radeon is the name for the open source AMD GPU driver in Ubuntu/Debian systems.
[19:41] <calleM> Oh okay. Thank you a lot.
[19:41] <yoshimitsu> hi
[19:41] <yoshimitsu> so i pressed esc on the reboot and nothing was wrong
[19:41] <yoshimitsu> but i can't seem to get anything but a black screen when booting
[19:41] <yoshimitsu> like first it's purple, then blank, then desktop
[19:42] <yoshimitsu> i have the open source radeon drivers in use
[19:42] <yoshimitsu> is there a log i can check?
[19:42] <ioria> yoshimitsu, what's your issue exactly ?
[19:42] <yoshimitsu> ioria: nothing, i'm making sure nothing is going wrong - the reboot after the installation froze, but everythng seems to work
[19:42] <yoshimitsu> ioria: update, reboot, startup, etc.
[19:43] <calleM> nah i got the same issue. AMD Driver is ... blaergh :)
[19:43] <yoshimitsu> calleM: :)
[19:43] <ioria> yoshimitsu, it happens, if you got a desktop and can login ... that's good
[19:43] <yoshimitsu> ioria: good! thanks!
[19:43] <yoshimitsu> :D
[19:43] <ioria> np
[19:43] <Guest69696969> yoshimitsu, i was going to answer but you took off
[19:43] <yoshimitsu> Guest69696969: oh
[19:43] <yoshimitsu> sorry :s
[19:44] <dixson> hello, install "ubuntu-calculator-app" and does not open
[19:44] <yoshimitsu> anyway i'm going to go work out for a bit
[19:44] <yoshimitsu> thanks doods, i'll be back
[19:44]  * yoshimitsu tips his hat
[19:46] <ioria> dixson, what is ubuntu-calculator-app ?
[19:47] <dixson> ioria, snap install  "ubuntu 16.04"
[19:48] <ioria> dixson, ah, not very good at snap, sorry
[19:50] <titaneer> hi I was wondering about the new livepatching service. So my understanding is that it works for every kernel version?
[19:51] <ioria> dixson, you can always use gnome-calculator in Advanced mode
[19:56] <nofa> hola
[19:56] <nofa> hi
[19:59] <debkad> hi
[20:04] <taliptako> why i shouldnt install packages from root user ?
[20:05] <lifted> taliptako: because you cant trust other progrmamers
[20:05] <lifted> taliptako: their code could compromise your machine as root, it could have a backdoor
[20:05] <lifted> taliptako: besides that, it could modify important files because as root, you are admin. so, if the programmer made a mistake, it could mess up whole system
[20:05] <taliptako> well if i only install php nginx and mysql ?
[20:05] <jatt> taliptako: because you could hose your system
[20:08] <taliptako> so i will just install these packages and i dont wanna create new user
[20:08] <titaneer> it is better to use sudo for installing packages rather than using root
[20:08] <taliptako> its can cause problems ?
[20:22] <titaneer> hi! I am getting
[20:22] <titaneer> cannot change apparmor hat of the support process for mount namespace capture. errmsg: Operation not permitted
[20:22] <titaneer> support process for mount namespace capture exited abnormally
[20:22] <titaneer> when I try to enable the livepatching
[20:27] <titaneer> anyone have a solution for chaning the apparmor hat thing for livepatching error?
[20:27] <titaneer> changing*
[20:27] <ObrienDave> give it a few minutes, someone will answer you
[20:42] <konrados> Morning :)
[20:43] <konrados> I've just mounter a hdd, I'm not gonna disconnect it physically in any time soon. Do I need to unmount it, when I'll want to restart the PC?
[20:43] <bekks> konrados: No.
[20:47] <konrados> Damn I got disconnected, i.e. my hexchat irc client just closed itself o.O anyway - thanks for the answer bekks ! I have one more question if I may, I mounted it to /media/something - that wasn't the right decision to call it like that, may I simply rename the folder, or should I unmount, remove folder, create a new one with a different name and then mount the hdd to this new folder again?
[20:49] <yoshimitsu> hi again
[20:55] <titaneer> Hi! I restarted my computer and now for trying to enable the livepatching service i I get is: aa_change_onexec failed with -1. errmsg: No such file or directory
[20:55] <ikonia> whatever file it's trying to reference doesn't exist
[21:01] <BabyMax> ok that "Sorry, Ubuntu 16.10 has experienced an internal error" popped up
[21:01] <BabyMax> what do i do now
[21:01] <ikonia> depends what the error is
[21:01] <ikonia> I suggest you just click "ok" and move on unless you want to debug it
[21:02] <Maxaroth> well i was talking about it earlier
[21:02] <Maxaroth> it happened right after my screen decided to take a shit on it self
[21:03] <Maxaroth> i have 2 of them
[21:03] <ikonia> please don't swear
[21:03] <ikonia> there is no need to
[21:03] <Maxaroth> oh sorry
[21:04] <Maxaroth> it happened right after my xserver decided to crash
[21:05] <Maxaroth> details say it was a crash
[21:08] <titaneer> after some research I found that aa_change_onexec belongs to AppArmor, but I find it weird that it is missing
[21:08] <ikonia> titaneer: why ?
[21:08] <titaneer> is there way to get it enabled?
[21:09] <ikonia> install it ?
[21:09] <titaneer> not found in app search
[21:09] <titaneer> apt*
[21:10] <SuperLag> I'm getting ready to install Yakkety in a VM. Turns out there's a known issue with an Intel driver, that's causing VMs to crash. Thing is, I can't get to the GRUB menu quick enough to blacklist the driver before the system hangs. Is there a way to modify the grub.cfg for the install, before you do the initial reboot?
[21:10] <bekks> SuperLag: Which bug are you talking about?
[21:10] <bekks> SuperLag: And why dont you use another network card model in your vm then?
[21:11] <ikonia> titaneer: apparmor is in the repos
[21:11] <fuzzybear3965> Can anyone explain why `find . -xtype -l` returns the list of broken symlinks in the current directory?
[21:11] <SuperLag> http://pubs.vmware.com/Release_Notes/en/fusion/8/fusion-851-release-notes.html - see info about intel_powerclamp in "Known Issues" section
[21:11] <SuperLag> bekks: it's not a NIC driver, it's a CPU driver
[21:11] <titaneer> ikonia: yeah, apparmor is installed and running, just that I get that one of its modules file is missing
[21:12] <ikonia> titaneer: which one ?
[21:12] <SuperLag> btw, this applies to VMware Workstation, as well
[21:12] <titaneer> the aa_change_onexec
[21:12] <SuperLag> but it's not the virtualization version that's the issue, of course
[21:13] <ikonia> titaneer: is the module actualllly called that
[21:14] <titaneer> http://manpages.ubuntu.com/manpages/precise/en/man2/aa_change_profile.2.html
[21:14] <ikonia> titaneer: looks like there was a bug on 16.04 that was fixed
[21:15] <ikonia> I'm not actually convinced the problem is fixed though, just that situation reading the bug
[21:15] <titaneer> yeah I have linux mint 18 and have it all up to date and I'm getting that weird error
[21:16] <jorge__> hello
[21:17] <titaneer> brb, lunch
[21:17] <ikonia> titaneer: so you're doing this on ubuntu or mint ?
[21:23] <jmadero> anyone know how to run the volume applet from terminal?
[21:24] <titaneer> back
[21:24] <titaneer> ikonia: mint
[21:24] <ikonia> titaneer: ok - so it's not really for this channel then
[21:24] <ikonia> titaneer: use the mint support channel on spotnet
[21:24] <squirrel> join #squirrels
[21:25] <titaneer> ikonia: roger will try their support channel
[21:25] <ikonia> titaneer: thanks
[21:25] <titaneer> jmadero: you could try to launch pavu from the terminal if you have that installed
[21:26] <dotz> Hi. Do groups created by cgcreate are persistent (= survive server reboots) or should I put cgcreate calls into something like /etc/rc.local ?
[21:27] <jmadero> titaneer: what is pavu?
[21:28] <titaneer> jmadero: pulse audio volume controller
[21:28] <yoshimitsu> so yeah i have tried glxgears, installed chrome, and all that, no issues - it seems the hang on reboot after install did nothing bad to my system
[21:28] <yoshimitsu> :)
[21:28] <titaneer> its package name is pavucontrol
[21:29] <wafflejock> jmadero, are you trying to launch a graphical sound level control from the terminal or something that runs in the terminal? can you elaborate a bit
[21:32] <titaneer> exit
[21:34] <SuperLag> hmm... I thought I'd be able to switch to the terminal when the installer was running :/
[21:34] <akik> jmadero: you could control pulseaudio with pactl but it's just a command line tool
[21:34] <jmadero> yeah I need the icon
[21:36] <yoshimitsu> well netflix works
[21:36] <wafflejock> jmadero, on 16.04?
[21:37] <jmadero> wafflejock: yeah, but I'm not running Unity
[21:37] <jmadero> thus why I need the terminal command
[21:37] <wafflejock> jmadero, what DE?
[21:37] <jmadero> Moksha (fork of E17)
[21:38] <wafflejock> jmadero, pavucontrol is a good one for pulse audio volume adjustment but is GUI based, pactl already mentioned can adjust at the command line but no graphical interface to it, alsamixer in alsa-utils gives you an adjustment at the alsa level I think using an ncurses based 'graphical display' in the terminal
[21:39] <wafflejock> jmadero, my guess is the unity sound indicator isn't going to work in another DE
[21:39] <jmadero> wafflejock: the gnome one does
[21:39] <wafflejock> jmadero, the package is here https://launchpad.net/ubuntu/+source/indicator-sound I'm pretty sure
[21:40] <jmadero> yeah it's installed, just can't figure out the command to run it
[21:40] <nubcake> how do i clear the shell history for root ?
[21:40] <wafflejock> jmadero, if you do dpkg -L packagename, it will list the files the package installed
[21:40] <bekks> nubcake: why do you want to do that?
[21:40] <wafflejock> jmadero, can just look for one in /usr/bin or the like that would probably be it but dunno off hand
[21:41] <jmadero> wafflejock: that's a good idea
[21:41] <gebruiker> what is the default font in the unity terminal?
[21:41] <nubcake> because i had to type some password which is now appearing in the history. i don't want that
[21:41] <ubuntu-mate> hi
[21:42] <nubcake> nevermind, figured it.
[21:43] <akik> nubcake: rm ~/.bash_history; history -c; exit
[21:43] <nubcake> akik: thanks
[21:43] <debkad> i never heard that .bash_history store passwords, it is shadowed by sudo
[21:44] <akik> debkad: it stores the password if you write it in plain text in the shell :)
[21:44] <debkad> hmm sound bad idea :D
[21:44] <akik> by accident, that is
[21:44] <debkad> yeah
[21:45] <Flannel> nubcake: If you have $HISTCONTROL set to ignorespace or ignoreboth, then prefacing commands with a space will cause them to NOT be stored in history (for future reference)
[21:45] <nubcake> Flannel: thank you
[21:49] <Guest45838> hi!
[21:53] <ubuntu-mate> alright guys
[22:00] <migmeneses> alright alright alright
[22:06] <guru> Hi
[22:07] <guru> i have a trouble
[22:07] <guru> in my ubuntu
[22:07] <guru> could somone help me?
[22:07] <guru> could anyone help me out?
[22:07] <guru> on a troublei a facing
[22:08] <guru> hi
[22:08] <guru> all
[22:08] <abdellah> hi
[22:09] <guru> help me
[22:09] <guru> i have trouble
[22:09] <abdellah> speek you french?
[22:09] <Bashing-om> guru: State the issue . Then we see what help there is .
[22:09] <guru> when i boot ubuntu
[22:09] <guru> i get UUID doesnt exist
[22:10] <sleepyhead> sounds like you will have to reinstall grub
[22:10] <guru> i have seen in forums
[22:10] <guru> but this is kind of wierd
[22:10] <UserOO7> http://askubuntu.com/questions/516217/alert-dev-disk-by-uuid-xxxxxxxxx-does-not-exist-dropping-to-a-shell
[22:10] <UserOO7> guru ^^
[22:11] <Bashing-om> guru: Can you boot the system as is ? then we can verify the UUIDs .
[22:11] <UserOO7> LiveCD can fix for him
[22:11] <guru> there isit
[22:11] <guru> ok
[22:11] <guru> soo here is the thing
[22:11] <guru> i dont see dev-disk
[22:11] <guru> its just UUID
[22:11] <guru> when i blkid
[22:12] <guru> LABEL : system reserverd
[22:12] <guru> UUID:xxxxx
[22:12] <guru>  type: NTFS
[22:12] <UserOO7> you could always reinstall ubuntu ;-P
[22:12] <guru> PARTUUID
[22:12] <guru> thirdtime mate
[22:12] <UserOO7> ./etc/fstab same uuid?
[22:12] <sleepyhead> ntfs?!
[22:13] <UserOO7> ext4 prob should be... dual booting?
[22:13] <guru> yes
[22:13] <guru> NTFS is what it shows
[22:13] <guru> permison denied for fsta
[22:14] <UserOO7> is this machine also booting windows?
[22:14] <guru> i had windows
[22:14] <guru> but its not allowing me
[22:14] <guru> to
[22:14] <guru> yes it has windows
[22:14] <guru> is there anyway i can revert it atleasat to windows
[22:14] <sleepyhead> god this is a mess!
[22:14] <guru> god its frustarting
[22:14] <UserOO7> reinstall ubuntu grub will detect the old windows and allow you to boot to it and also give you an option for ubuntu boot... just dont fudge it up this time
[22:14] <bekks> guru: Insert a windows cd, install it.
[22:15] <guru> my sister fucked up something
[22:15] <guru> and i dont know what to do
[22:15] <UserOO7> I'm guessing your windows partition is more important? if so use windows install disc to fix
[22:15] <UserOO7> MBR then install ubuntu again later
[22:15] <guru> bekks , windows CD not at this time
[22:16] <guru> aaah
[22:16] <UserOO7> USB ubuntu livecd
[22:16] <bekks> guru: Then you cant fix your windows.
[22:16] <guru> at this moment i cant do anything?
[22:16] <guru> i am downloading windows right now :D
[22:16] <guru> and trying to boot with PD
[22:16] <bekks> Whats "PD"?
[22:16] <guru> probably that would work?
[22:16] <guru> pendrive?
[22:17] <guru> USB
[22:17] <guru> TYPE" SWaP"
[22:17] <sleepyhead> i remember back in the day ubuntu could be installed on a windows partition
[22:17] <bekks> guru: easy on the enter please.
[22:17] <sleepyhead> people used to call flash drives pendrives back then too
[22:17] <UserOO7> does your boot menu had an escape key you can bang on and try rescue boot ubuntu or even boot to windows? sometimes people put the timer to zero seconds and it basically skips the grub2 boot prompt
[22:17] <sleepyhead> are you sure you are not from the past guru?
[22:18] <guru> yeah  i have done it myself before ,sleepy head
[22:18] <bekks> guru: Which windows version did you use?
[22:18] <sleepyhead> it's 2016 here. what year is it where you live?
[22:18] <guru> windows 7?
[22:18] <bekks> guru: We dont know? Was it windows 7?
[22:18] <guru> LOL
[22:19] <sleepyhead> probabl win 95
[22:19] <guru> aaah
[22:19] <guru> i am at (initramfs) could i go to the grub ?
[22:19] <guru> from here?
[22:19] <bekks> No.
[22:20] <guru> reboot?
[22:20] <guru> and then?
[22:20] <bekks> Yes, then, enter the grub menu.
[22:20] <guru> where would i get the grub menu
[22:20] <bekks> After BIOS processing is finished, prior booting.
[22:20] <guru> it goes to ubuntu advanced and system setup
[22:21] <bekks> guru: thats the grub menu.
[22:21] <guru> okay now
[22:21] <UserOO7> https://www.linux.com/learn/how-rescue-non-booting-grub-2-linux
[22:21] <guru> i dont see windows 7 here
[22:21] <bekks> guru: Because your Windows installation is broken.
[22:21] <guru> Holy Cow
[22:22] <cappicard> good evening. I'm trying to setup my logitech Z506 5.1 surround sound speakers. I have front speakers in the green jack, rear in the blue jack, my center/subwoofer in the pink jack.
[22:22] <bekks> guru: thats why you were told to use a windows install medium for fixing it.
[22:22] <cappicard> but 16.10 does not play anything through the rear speakers, my center, or my subwoofer
[22:22] <sleepyhead> cappicard: go on
[22:22] <snfgf> woah, i have a start job that'll run for 5 minutes 7 seconds before acknowledging a failure, any way i can skip this?
[22:22] <guru> i hate my sister more than TRUMP
[22:23] <UserOO7> once your in ubuntu bash promt again: sudo os-prober; sudo update-grub
[22:23] <snfgf> Trump doesn't hate your sister, Trump doesn't hate anyone
[22:23] <bekks> guru: you dont know how much Trump hates your sister, if he does at all.
[22:23] <bekks> guru: So get a windows install medium, and fix your windows, first.
[22:23] <cappicard> in windows 10, it detects i have the speakers in the blue and pink jacks. but ubuntu still treats them as line-in and mic rear.
[22:24] <snfgf> guys, how can i decrease the time a start job will wait before failing?
[22:24] <UserOO7> if you could care less about your current ubuntu install just reinstall and it will solve both problems
[22:24] <guru> okay
[22:24] <guru> wait a min
[22:24] <UserOO7> it'll put a grub entry for windows and one for ubuntu
[22:24] <guru> i am in the grub>
[22:24] <cappicard> alsamixer doesn't give me anything about number of channels.
[22:24] <sleepyhead> cappicard: no idea mate. maybe make a post in the forum?
[22:24] <guru> ls
[22:24] <guru> ?
[22:24] <UserOO7> yea
[22:24] <cappicard> pavucontrol is of no avail
[22:24] <UserOO7> shows hds
[22:24] <bekks> guru: no.
[22:24] <guru> bekks?
[22:25] <guru> Ok
[22:25] <sleepyhead> who is this bekks?
[22:25] <bekks> UserOO7: you arent in the Ubuntu shell, but in grub.
[22:25] <sleepyhead> right
[22:25] <UserOO7> yea ls shows hdds
[22:25] <guru> well well well , it all goes in the backwards
[22:25] <guru> if i type LS , it says SL
[22:26] <guru> oh lord
[22:26] <guru> i need to reboot
[22:26] <UserOO7> sl is an awesome command, lol (choo-choo)
[22:26] <sleepyhead> so you have problems with your keyboard map too?
[22:26] <guru> ok this is wierd
[22:26] <guru> bekks
[22:26] <guru> i have HD1
[22:26] <guru> (hd1)
[22:27] <guru> and (hd0)
[22:27] <guru> 6,5,3,2 partiions
[22:27] <guru> missing 4
[22:27] <guru> and with hd1 (hd1,msdos1)
[22:27] <ANTI_RNM> STOP the fucking bastards who using :    "Thoughts Detecting Machine" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[22:27] <ANTI_RNM> !!!!!!!!!!!!!!!!!!!!!!!!!!
[22:27] <sleepyhead> grub post it all on pastebin
[22:28] <guru> ?
[22:28] <sleepyhead> pastebin.com
[22:28] <sleepyhead> post it there so we can see
[22:29] <guru> ok its going to be a stupid question , how do i copy
[22:29] <sleepyhead> you can't copy from grub. just type it in manually
[22:29] <narupo> good morning all
[22:30] <narupo> sudo apt-cache search go-is-god
[22:30] <guru> bekks
[22:30] <bekks> guru: Yes?
[22:30] <kk4ewt> guru fpaste your sudo fdisk -l output
[22:31] <sleepyhead> will fdisk run in grub shell?
[22:31] <kk4ewt> i think i can explain the no 4 but i need to look
[22:31] <cuddylier> I have kernel 'Linux u4 3.19.0-73-generic #81~14.04.1-Ubuntu SMP' but I can't find it on any of the lists for being vulnerable to dirty cow, anyone know?
[22:31] <kk4ewt> cuddylier, yes
[22:31] <cuddylier> kk4ewet: As in you know or you know it's vulnerable?
[22:31] <cuddylier> I'm on Ubuntu 14.04
[22:32] <guru> cant find command
[22:32] <kk4ewt> yes unless you have gotten a new kernel in the last week its vulnerable
[22:32] <guru> bekks , i am on recovering windows now
[22:32] <guru> i am fed up
[22:32] <sleepyhead> 14.04 is the lts version right?
[22:32] <bekks> guru: And?
[22:32] <guru> lets hope for the best
[22:32] <guru> ill be back in a moment
[22:33] <sleepyhead> cuddylier: surely it was one of the first in line for an update
[22:33] <cuddylier> sleepyhead: I don't know anything about this kernel version, says last update was on 19th October
[22:33] <cuddylier> Which I've applied
[22:33] <cuddylier> So I should be good then?
[22:34] <sleepyhead> yes
[22:34] <cuddylier> Great, thanks
[22:34] <Bashing-om> cuddylier: The 3.19 series is vivid's kernel (15.04) and is no longer supported . Need to get up on xenial's kernel .
[22:34] <sleepyhead> assuming you've done an apt-get update and apt-get upgrade recently just to confirm there is nothing more recent
[22:34] <sleepyhead> cuddylier: ^^
[22:34] <cuddylier> How do I change to a different kernel?
[22:34] <cuddylier> And yes I did those commands
[22:34] <sleepyhead> cuddylier: why would you want to do that?
[22:35] <bekks> cuddylier: Install one, reboot, select it in the grub menu.
[22:35] <sleepyhead> cuddylier: fine. just make sure you rebooted after the last kernel upgrade
[22:35] <cuddylier> I don't know lol, just because Bashing-om said so
[22:35] <cuddylier> And yes I did a reboot afterwards and confirmed the kernel version changed
[22:35] <sleepyhead> cuddylier: great
[22:35] <Bashing-om> cuddylier: Try ' sudo apt update ; sudo apt full-upgrade ' see if the new kernel gets installed .
[22:36] <cuddylier> Bashing-om: 0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.
[22:37] <sleepyhead> cuddylier: according to this it's supported till 2019: https://wiki.ubuntu.com/Releases . they probably backported the fix @Bashing-om
[22:40] <speccles> boo
[22:43] <Bashing-om> cuddylier: Yeah .. 14.04 is supported til 2019 ..but with HWE enabled, the kernel is not . With HWE you must keep the kernel current ,// what returns ' uname -r ' after a re-boot ?
[22:44] <cuddylier> I just tried a dirty c0w test: https://www.redpacketsecurity.com/testing-dirty-cow-cve-2016-5195/ and worked good so looks like that kernel fixed it
[22:45] <cuddylier> Bashing-om: 3.19.0-73-generic
[22:45] <cuddylier> MOTD says: "* Switch to the current security-supported stack by running:
[22:45] <cuddylier> sudo apt-get install linux-image-generic-lts-xenial linux-generic-lts-xenial
[22:45] <cuddylier> and reboot your system."
[22:45] <cuddylier> Is that what you were saying?
[22:47] <Bashing-om> cuddylier: Yepper .. run that then as that is what the system is advising you to do . I do concur .
[22:53] <gde33> is there a reason why one cant conveniently install software or add a repository from a website?
[22:53] <ikonia> you can
[22:54] <gde33> say I have http://debian.yacy.net/ how do I make an apt:// link from it?
[22:54] <ikonia> thats not a repo
[22:54] <cuddylier> Bashing-om: It's now updated to '4.4.0-45-generic #66~14.04.1-Ubuntu SMP '
[22:54] <cuddylier> But that's a 16.04 kernel? I'm on 14.04.5
[22:54] <jose__> hola
[22:55] <gde33> ikonia: that just further illustrates how aweful the process is
[22:55] <ikonia> not really
[22:55] <OerHeks> add-apt-repository makes it easy with keys and all, but your repo need some manual steps, see http://askubuntu.com/questions/309390/how-to-install-the-yacy-search-engine
[22:55] <gde33> I dont get it, I want to install software. Why do I need to do more than click some link?
[22:55] <ikonia> you've just given an invalid url and seem to blame some sort of "process" for it failing
[22:55] <OerHeks> answer from d3vid
[22:56] <gde33> ikonia: does the aptUrl install anything or does it just add a repository?
[22:56] <Bashing-om> !hwe | cuddylier
[22:57] <minimec> gde33: You would just add a line to your sources list folder. Like that you would get all the updates and so on... See here http://www.yacy-websuche.de/wiki/index.php/En:DebianInstall
[22:57] <ikonia> gde33: it sends the url through the package manager to tell it to "load it"
[22:57] <cuddylier> Bashing-om: Ah okay, thanks
[22:57] <gde33> ikonia: what does loading mean?
[22:57] <ikonia> gde33: parse the package manifest to make the packages available in your package manager
[22:58] <gde33> minimec: I cant help but laugh when looking at that page, it makes no sense to me at all.
[22:58] <ikonia> gde33: well, if you change your attitude and actually ask for help, people will help you
[22:58] <gde33> ikonia: ok, so I then have to go to the terminal or the software center to tell it to install things from it?
[22:58] <ikonia> but your not really inspiring people to help you
[22:59] <Jordan_U> gde33: Apturl never adds repositories. An apturl link can only specify package names, if those packages are not in the default repositories then you need to add a repository containing them before an apturl link can be used to install them.
[22:59] <gde33> I'm wildly confused, I dont really need help.
[22:59] <gde33> Jordan_U: ah ok ty
[22:59] <ikonia> gde33: you'll need to use a software tool that is familier with the package manifests of the repo
[23:01] <minimec> gde33: Well, just forget the 'windows way' when installing software. Ijust image that you would subscribe to a podcast. So whenever a new version of the podcast is out, you would get a notification. So in our case, the 'podcast' is your software, and the notification is a software update provided by the Software Manager of your Operating System...
[23:01] <gde33> minimec: the page has instructions to add it to the crontab for updates
[23:03] <gde33> I actually had it running by downloading it to a folder and running the .sh after fighting with nautilus
[23:03] <gde33> but now it says "Either you have not installed java or it is not in your PATH"
[23:04] <minimec> gde33: I see that now. Your software is ment to run as server. So it provides a solution to check for newer version and do the update. If you keep your machine up-to-date by checking for updates yourself, you would not need these crontab instructions.
[23:09] <gde33> is it hard to turn this into a normal software package?
[23:09] <gde33> the search engine is quite nice, when it runs everything works
[23:11] <SynfulAck> hey can any tell me how to figure out more closely what this is. my /etc/ld.so.conf.d/f points to it http://imgur.com/a/ysx7m
[23:12] <ikonia> SynfulAck: what are you actually asking
[23:14] <GreyFaceNoSpace_> hi
[23:15] <GreyFaceNoSpace_> help
[23:15] <ikonia> fantastic
[23:15] <ikonia> GreyFaceNoSpace_: you'll need to ask a clear question if you want help
[23:15] <ikonia> saying "help" is like me saying "fix"
[23:15] <GreyFaceNoSpace_> @ikonia sorry i was looking for the manual command
[23:15] <GreyFaceNoSpace_> lol
[23:16] <GreyFaceNoSpace_> @ikonia forgot how to identify my nick
[23:16] <GreyFaceNoSpace_> l
[23:17] <minimec> gde33: If you add the repository to you sources, all you have to do is 'sudo apt update' 'sudo apt upgrade' to have the newest verion installed...
[23:18] <konrados> Hi....
[23:18] <SynfulAck> ikonia, i just am unfamiliar with the /etc/ld.so.conf.d directory, ldconfig and libraries.
[23:18] <ikonia> SynfulAck: so what do you actually want ?
[23:18] <gde33> minimec: I tried, then it didn't have a key. Actually I first try (from wiki):  echo 'deb http://debian.yacy.net ./' > /etc/apt/sources.list.d/yacy.list
[23:18] <gde33> minimec: this produces an error
[23:18] <pacovc> I have ubuntu 16.10 fully installed on a usb that can boot like a desktop ubuntu that is persistant.. there is an option within ubuntu to encrypt the home folder but I was looking for somone options to encrypt the entire usb...similar to how the entire usb can be encrypted on a desktop..either with luks or veracrypt...]
[23:19] <konrados> On ##linux everybody got crazy... so I'll try here. I want to mount a device on login, I know it's about /etc/fstab, so I have this so far: http://pastebin.com/RQYJMqiL can someone look at this, please?
[23:19] <gde33> minimec: elsewhere it was suggested to use:  $ echo 'deb http://debian.yacy.net ./' | sudo tee -a /etc/apt/sources.list
[23:19] <reisio> pacovc: storage is storage to GNU/Linux systems
[23:19] <reisio> pacovc: full disk encryption is the same for a spinner & a USB stick
[23:19] <minimec> gde33: Ok. So continue with the 'wget' and the 'apt-key' command... That will add the key, and the error is gone.
[23:19] <gde33> minimec: update then complaints about the lack of key, the wiki suggests: wget http://debian.yacy.net/yacy_orbiter_key.asc -O- | apt-key add - apt-key advanced --keyserver pgp.net.nz --recv-keys 03D886E7
[23:19] <ikonia> I'd question why you are encypting a usb stick running a compressed file system into ram
[23:20] <pacovc> reisio your saying there is an option within ubuntu because its not standard within the setup
[23:20] <reisio> pacovc: nope
[23:20] <gde33> minimec: which produces a messy request for root
[23:20] <reisio> it's an option in Ubuntu for convenience: some people will want it, some will not
[23:20] <pacovc> ikonia your question does not answer my question :)
[23:20] <reisio> konrados: is that output from a live OS?
[23:20] <ikonia> pacovc: no, but it's a question you should ask
[23:21] <pacovc> reisio so what are you saying?
[23:21] <reisio> pacovc: think I already said what I said
[23:21] <gde33> minimec: putting sudo in front and typing the password it gives a bunch of lines including a long empty one with bracets (?) and finally: Cannot write to ‘-’ (Broken pipe).
[23:21] <SynfulAck> ikonia, how to check its integrity, i entered the buildID but nothing comes up
[23:21] <konrados> oh, hi reisio :) yes, it is from a live OS
[23:21] <reisio> konrados: okay
[23:21] <pacovc> reisio well i don't understand it ...so you saying you can or you can't?
[23:21] <ikonia> SynfulAck: a build id ??? entered it where
[23:21] <ikonia> SynfulAck: what's the actual problem
[23:22] <gde33> minimec: but it shows it over 2 lines, I should have tried that first
[23:22] <SynfulAck> ikonia, google, want to verify its not tampered. dont understand .so files.
[23:22] <pacovc> reisio did you write all that to say there is not an option?
[23:22] <reisio> konrados: I'd use 'LABEL=DISK3_VOL1' for the first item
[23:22] <ikonia> SynfulAck: it's not tampered with
[23:23] <gde33> minimec: same error
[23:23] <reisio> konrados: for the second I wouldn't use /media/seagate/c, I'd probably use /mnt/seagate (sudo mkdir -p /mnt/seagate)
[23:23] <minimec> gde33: Ok. Do 'sudo -i' --> yourpassword. That gives you temporary root. Then do the 'wget' and 'apt-key' line without sudo. Afterwards do 'exit' to get out of temporary root.
[23:23] <pacovc> well taht went no where...lol...anyone know about encrypted a usb that has ubuntu on it
[23:23] <reisio> /media/ is probably for dynamic mounts on your system; best to keep dynamic and static separate
[23:23] <gde33> minimec: both instructons on one line? http://www.yacy-websuche.de/wiki/index.php/En:DebianInstall
[23:24] <minimec> gde33:  one after the other. The wget line downloads the keyfile. the second one installs it.
[23:24] <konrados> ok, sec, reisio ...
[23:24] <gde33> ok
[23:25] <reisio> konrados: I'd use sudo ntfslabel to rename sda1's label, though, to something not arbitrary & awful
[23:26] <reisio> then you could use, for example: LABEL=THOMASEDISON
[23:26] <reisio> well, actually he was an awful person
[23:26] <reisio> LABEL=TESLA
[23:26] <minimec> gde33: Oh. I See now. The first line should be enough... Basically you do the same thing two times...
[23:26] <reisio> there you go
[23:27] <konrados> \grep reisio
[23:27] <konrados> ups
[23:28] <gde33> minimec: it produces nice configuration dialogs now
[23:28] <reisio> konrados: tu madre! :p
[23:28] <reisio> konrados: /lastlog reisio
[23:29] <konrados> reisio - yeah, but I created a custom command in hexchat :)
[23:29] <minimec> gde33: I don't know what you mean, but as I mentioned, you only need 'wget http://debian.yacy.net/yacy_orbiter_key.asc -O- | apt-key add -' to get the key added.
[23:29] <reisio> you sick hacker
[23:29] <konrados> I now have all the messages from you, I'll take care about it tomorrow, first I'll read https://wiki.archlinux.org/index.php/Fstab once again reisio  :)
[23:30] <konrados> Thanks again!
[23:30] <gde33> minimec: Sorry, a problem occured while installing software. Package:yacy 1.90.9000
[23:31] <minimec> gde33: Sorry I am listening to that american fool called <the name shall not be mentioned>, doing a speech in phoenix.... 'China is getting away with murder...' What is he talking about...
[23:32] <gde33> welcome to the end of the internet
[23:32] <snfgf>    lolwut why does gcc contain libjava
[23:34] <minimec> gde33: Did you install 'apt-get install openjdk-7-jre-headless'?
[23:35] <gde33> minimec: I should have that already
[23:35] <gde33> I ran it before
[23:37] <gde33> minimec: http://pastebin.com/5VpuQ0xf
[23:38] <gde33> minimec: it seems to all of a sudden not need a whole lot of packages?
[23:40] <minimec> gde33: First of all you have a lot of obsolete packages. Do 'sudo apt autoremove' once... That will remove them.
[23:41] <Guest8327> my firefox crashes in pine64 board
[23:41] <Guest8327> arm64
[23:41] <Guest8327> anyone can help on that?
[23:41] <gde33> minimec: wow
[23:42] <minimec> Guest8327: Can you once start it in a terminal? Maybe you get some additional information.
[23:42] <Guest8327> my firefox crashes in pine64 board
[23:42] <Guest8327> anyone can help on that?
[23:43] <Keydns> i am wondering if someone teaches linux to beginners
[23:44] <ikonia> there are many courses/classes
[23:44] <ikonia> as well as documentation
[23:44] <ikonia> this channel will help if you have specific ubuntu questions
[23:44] <konrados> If you could suggest some book, ikonia ?
[23:44] <konrados> Online?
[23:44] <ikonia> not really as it depends what you're trying to do and how you want to approach it
[23:44] <ikonia> read the reviews
[23:46] <konrados> Yeah, I tried once, there were books for *complete* beginners (like what is terminal, commands like "cd", "mkdir"), or at a higher level there were things I could not quite understand, ikonia - I could not find anything between
[23:46] <ikonia> research specific topics and you'll find a range of documentation
[23:47] <konrados> Yes, this is what I do, but I think I miss some basics, something obvious. But, I'll try again, thanks ikonia.
[23:48] <Jordan_U> !manual | konrados
[23:48] <minimec> gde33: Reading your installation log... Why do you have 'openjdk-9-jre-headless'? Ubuntu is still on 'openjdk-8-jre-headless'? Do you have some java ppa installed?
[23:48] <gde33> minimec: I'm still cleaning out the garbage
[23:49] <minimec> gde33: ok ;)
[23:49] <gde33> minimec: I was thinking to apt-get install openjdk-7-jre-headless
[23:50] <gde33> but if I have 9 that isn't an option I'm gussing?
[23:50] <minimec> gde33: Depending on the ubuntu version you run, you will have version 8. That's the case for 16.04 and newer...
[23:50] <gde33> I probably do have some ppa but dont ask me why
[23:52] <konrados> Thanks Jordan_U but it's about the GUI, now I want to mount drives automatically on login, and the advices I get are cryptic for me :) This is what I want - something about what drives' uuid are, what are those sdax sdbx etc... why do we need to mount drives in the first place etc. I'm just lost, and I've been working on Ubuntu for the last year, so I'm obviously missed something during this time :)
[23:52] <gde33> minimec: can the javas run side by side?
[23:53] <minimec> gde33: As far as I know 'yes'. But if version 8 is working, I would not see the need to install an older one side by side.
[23:54] <gde33> on line 74 in the pastebin  /etc/ca-certificates/update.d/jks-keystore: 82: /etc/ca-certificates/update.d/jks-keystore: java: not found
[23:54] <minimec> gde33: You would problably do some changes manually, because the yacy software would look for java @ the default location... And that would be the default version provided by your ubuntu version.
[23:55] <wafflejock> gde33, http://askubuntu.com/questions/315646/update-java-alternatives-vs-update-alternatives-config-java
[23:55] <wafflejock> gde33, can have multiple versions installed just use the update alternatives shown there to switch between installed versions so the right thing is linked into /usr/bin for java and javac (if you're compiling)
[23:58] <minimec> gde33: 'java: not found': That's why I was checking the java versions provided by ubuntu...
[23:59] <gde33> sudo update-alternatives --config java  just says there is only one candidate
[23:59] <wafflejock> gde33, yeah it doesn't install them will just let you switch between ones you have installed
[23:59] <gde33> Package openjdk-7-jre-headless is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source