/srv/irclogs.ubuntu.com/2016/11/09/#maas.txt

xmehi all06:20
mbeierlQuestion: I have MAAS installed and am wanting to manually insert a single server.  Using the web ui, I added hardware, with MAC address of the PXE interface, as well as IPMI functions.  On commissioning, the server powers on and starts PXE.  On MAAS server, using tcpdump, I see the PXE boot requests coming in from MAC address, but MAAS never responds.  What did I do wrong?14:57
brendandmbeierl, have you enabled the dhcp server on the right subnet?15:01
mbeierlbrendand: ah, probably not.  Was following maas guides on line and that was not clear.  Can you point me to a guide for that in 1.9?  Or if it's simple, what do I need to do?15:02
mbeierlalso, does it become a DHCP server for that subnet by default, or will it only respond to the MAC addresses listed in the hardware?  I need to be careful as this is a shared subnet15:03
brendandmbeierl, hmm. no - it's not really recommend to enable dhcp on a subnet with another dhcp server running15:04
mbeierlthere is not another DHCP running15:04
mbeierlbut we might want to have two MAAS systems for testing and I want to have mine respond to my servers only.  Is that possible?15:04
mbeierlI know from dnsmasq, as an example, that I can restrict replies to certain MACs only, but I don't know if that is the intent of MAAS or not.15:05
brendandmbeierl, there might be a way to do that, but i don't know off the top of my head. are you using 1.9 or 2.0 > ?15:06
mbeierl1.915:06
brendandok15:06
mbeierlI found the 1.9 docs for DHCP, I think15:08
mbeierlbrendand: ah.  I'm acutally using MAAS 2.0.  And I cannot find the installation docs for that online: https://maas.ubuntu.com/docs2.0/15:21
brendandmbeierl, http://maas.io/docs/en/?15:28
mbeierlbrendand: ah.  thanks!15:28
mbeierlhttp://maas.io/docs/en/installconfig-subnets-dhcp <- I think this is what I missed15:29
mbeierlbrendand: ok, enabled DHCP on the VLAN, but still nothing...15:33
mbeierl07:42:12.293469 90:e2:ba:82:bc:f8 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 590: 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 90:e2:ba:82:bc:f8, length 54815:44
brendandmbeierl, as long as you have images synced it really ought to work15:49
mbeierlbrendand: :(  That's what I thought.  Going to dig further to see if I can figure out what else might be going on.  Any log files you can recommend?15:50
begbertMy fresh MAAS install seems to be hanging on Region importing when I try to import boot images.18:17
begbertLast log entry is Nov  9 13:16:32 bme-maas maas.import-images: [INFO] Finished importing boot images, the region does not have any new images.18:17
BravenHello all. Can vlan be used to commission nodes?18:32
Braven??18:35
begberthttp://askubuntu.com/questions/847544/importing-images-hangs-at-importing-region19:31
begbertWell, this was a very helpful use of my time.  Guess I'll go use Foreman or something.19:49
Braven I am trying to add a vip in interface on the maas server20:54
Bravenit keeps cutting off the :0 of bond0:020:55
mbeierlok, I am able to start commissioning a node, but it does not appear to be successful.  I am getting HTTP 401 errors: POST /MAAS/metadata/2012-03-01/ HTTP/1.1" 401.  The systems cannot access the internet directly for NTP, so I put an ntp server into the MAAS/settings page, but still no luck21:21
Bravenhmm21:26
Bravenhow long did you wait?21:27
=== zz_CyberJacob is now known as CyberJacob
=== CyberJacob is now known as zz_CyberJacob

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!