[06:20] <xme> hi all
[14:57] <mbeierl> Question: I have MAAS installed and am wanting to manually insert a single server.  Using the web ui, I added hardware, with MAC address of the PXE interface, as well as IPMI functions.  On commissioning, the server powers on and starts PXE.  On MAAS server, using tcpdump, I see the PXE boot requests coming in from MAC address, but MAAS never responds.  What did I do wrong?
[15:01] <brendand> mbeierl, have you enabled the dhcp server on the right subnet?
[15:02] <mbeierl> brendand: ah, probably not.  Was following maas guides on line and that was not clear.  Can you point me to a guide for that in 1.9?  Or if it's simple, what do I need to do?
[15:03] <mbeierl> also, does it become a DHCP server for that subnet by default, or will it only respond to the MAC addresses listed in the hardware?  I need to be careful as this is a shared subnet
[15:04] <brendand> mbeierl, hmm. no - it's not really recommend to enable dhcp on a subnet with another dhcp server running
[15:04] <mbeierl> there is not another DHCP running
[15:04] <mbeierl> but we might want to have two MAAS systems for testing and I want to have mine respond to my servers only.  Is that possible?
[15:05] <mbeierl> I know from dnsmasq, as an example, that I can restrict replies to certain MACs only, but I don't know if that is the intent of MAAS or not.
[15:06] <brendand> mbeierl, there might be a way to do that, but i don't know off the top of my head. are you using 1.9 or 2.0 > ?
[15:06] <mbeierl> 1.9
[15:06] <brendand> ok
[15:08] <mbeierl> I found the 1.9 docs for DHCP, I think
[15:21] <mbeierl> brendand: ah.  I'm acutally using MAAS 2.0.  And I cannot find the installation docs for that online: https://maas.ubuntu.com/docs2.0/
[15:28] <brendand> mbeierl, http://maas.io/docs/en/?
[15:28] <mbeierl> brendand: ah.  thanks!
[15:29] <mbeierl> http://maas.io/docs/en/installconfig-subnets-dhcp <- I think this is what I missed
[15:33] <mbeierl> brendand: ok, enabled DHCP on the VLAN, but still nothing...
[15:44] <mbeierl> 07:42:12.293469 90:e2:ba:82:bc:f8 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 590: 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 90:e2:ba:82:bc:f8, length 548
[15:49] <brendand> mbeierl, as long as you have images synced it really ought to work
[15:50] <mbeierl> brendand: :(  That's what I thought.  Going to dig further to see if I can figure out what else might be going on.  Any log files you can recommend?
[18:17] <begbert> My fresh MAAS install seems to be hanging on Region importing when I try to import boot images.
[18:17] <begbert> Last log entry is Nov  9 13:16:32 bme-maas maas.import-images: [INFO] Finished importing boot images, the region does not have any new images.
[18:32] <Braven> Hello all. Can vlan be used to commission nodes?
[18:35] <Braven> ??
[19:31] <begbert> http://askubuntu.com/questions/847544/importing-images-hangs-at-importing-region
[19:49] <begbert> Well, this was a very helpful use of my time.  Guess I'll go use Foreman or something.
[20:54] <Braven>  I am trying to add a vip in interface on the maas server
[20:55] <Braven> it keeps cutting off the :0 of bond0:0
[21:21] <mbeierl> ok, I am able to start commissioning a node, but it does not appear to be successful.  I am getting HTTP 401 errors: POST /MAAS/metadata/2012-03-01/ HTTP/1.1" 401.  The systems cannot access the internet directly for NTP, so I put an ntp server into the MAAS/settings page, but still no luck
[21:26] <Braven> hmm
[21:27] <Braven> how long did you wait?