=== JanC_ is now known as JanC | ||
cpaelzer | ThiagoCMC: your system seems rather idle or super locked up with so many HLT exits | 06:44 |
---|---|---|
cpaelzer | ThiagoCMC: anyway if that stat isn't enough and none of the tools is (I don't know) then you can still tap on all these on your own | 06:44 |
cpaelzer | ThiagoCMC: check http://www-05.ibm.com/de/events/linux-on-system-z/downloads/Tools-MK2-V7-Web.pdf page 163 ff | 06:44 |
cpaelzer | ThiagoCMC: you can just tap on the kvm tracpoints if you like and likely get the extra info on the msr write | 06:44 |
cpaelzer | ThiagoCMC: locks and too much idle together with much exits I have seen often on oversized guests | 06:45 |
cpaelzer | ThiagoCMC: so depending on your case just reduce the amount of vcpus for a quick test | 06:46 |
breezy_ | hey guys, i installed ubuntu server, and i was using it.... but everytime i load up i get this one liner on a black screen "dev/sda1: clean 65938/44744704 files, 325515/178977536 blocks" | 07:29 |
breezy_ | last time i had the same black screen and it started working after maybe 10 minutes.... does it usually take 10minutes in order for me to get a command prompt? | 07:30 |
breezy_ | i tried !sysreq | 07:30 |
breezy_ | and alt+printscreen REISUB | 07:30 |
breezy_ | but i dont know if that is the reason it started last time or not... but right now i just have one line and its not starting... | 07:30 |
breezy_ | anyone here? | 07:32 |
cpaelzer | breezy_: could that be a file system check? | 08:27 |
cpaelzer | nacc: current usd repo is not supposed to work right? | 08:27 |
breezy_ | i have no idea what it is | 08:27 |
breezy_ | im completely new to ubuntu serer | 08:27 |
breezy_ | i was using it earlier today (and i got the same error earlier) i just have no idea how i bypassed it before | 08:27 |
cpaelzer | breezy_: http://askubuntu.com/questions/383114/my-ubuntu-is-running-fsck-on-every-bootup | 08:28 |
cpaelzer | breezy_: and http://askubuntu.com/questions/761653/startup-problem-in-16-04-lts | 08:28 |
breezy_ | cpaelzer: i can't run ANY code | 08:29 |
breezy_ | the screen is simply black | 08:29 |
breezy_ | with that one line | 08:29 |
cpaelzer | breezy_: while it is doing the fs check | 08:29 |
cpaelzer | breezy_: that is blocking on boot to ensure fs integrity is ok | 08:29 |
breezy_ | how long should the fs check take | 08:30 |
breezy_ | i waited 15mins | 08:30 |
cpaelzer | breezy_: the solution is to find why it is doing that on every boot on your system | 08:30 |
breezy_ | but how | 08:30 |
cpaelzer | breezy_: depends on the amount and size and speed of the disk | 08:30 |
breezy_ | if i cant run any code | 08:30 |
breezy_ | im using a 750gb ssd | 08:30 |
cpaelzer | breezy_: for the how I'd start on the two links I sent | 08:30 |
breezy_ | cpaelzer: im new to ubuntu server i dont rly understand any of it | 08:30 |
cpaelzer | breezy_: if it is like "never" stopping - lets say an hour to be on the safe side you might run a CD/USB into recovery mode | 08:30 |
breezy_ | i bought a udemy tutorial and was trying to follow through | 08:31 |
cpaelzer | breezy_: to make it clear this is not the default behaviour - something lets your system assume it could be broken and it should check its filesystems | 08:31 |
breezy_ | last time i got into it but it shouldnt take more than 15mins for me to get into the command line? | 08:31 |
breezy_ | are u suggesting next time i wait longer | 08:31 |
cpaelzer | breezy_: wait longer and then debug why it is doing every boot following the links I sent | 08:31 |
breezy_ | ok | 08:31 |
cpaelzer | breezy_: if it never stops fall back to the recovery consoles you get out of the CD/USB media | 08:32 |
cpaelzer | and then analyze | 08:32 |
breezy_ | fwiw, i dont have it on a separate partition i have it all on the hard drive wiped | 08:33 |
breezy_ | its weird i shouldnt have this bug after a clean install though right | 08:33 |
breezy_ | is it something to do with system compatibility? | 08:33 |
cpaelzer | breezy_: ack | 08:33 |
breezy_ | (using a laptop) | 08:33 |
breezy_ | cpaelzer i wiped all the partitions clean so there's no other OS on the harddrive | 08:34 |
cpaelzer | breezy_: depends on the case, I'd assume more of a misconfiguration or an aborted (or silentyl failing) install | 08:34 |
breezy_ | what about software install | 08:34 |
breezy_ | could that be the problem | 08:34 |
cpaelzer | breezy_: less likely imho | 08:34 |
breezy_ | ok | 08:35 |
cpaelzer | breezy_: more config in fstab/disk drivers/partitioning | 08:35 |
cpaelzer | breezy_: if you wipe it anyway just say yes to all the installer asks | 08:35 |
cpaelzer | breezy_: do not try to force it on one partition or so | 08:35 |
cpaelzer | breezy_: the default (according to its definition) is the most tested and thereby most stable | 08:35 |
cpaelzer | nacc: http://paste.ubuntu.com/23455067/ | 08:35 |
breezy_ | so just use all defaults basically? | 08:36 |
breezy_ | ok makes sense | 08:36 |
cpaelzer | breezy_: yes | 08:36 |
breezy_ | i'll prob try another install | 08:36 |
breezy_ | thx cp | 08:36 |
cpaelzer | nacc: since the docu on the wiki is on the new one I thought to fetch new from git | 08:38 |
cpaelzer | nacc: for now I just assumed what is pushed is not intended to be complete | 08:38 |
cpaelzer | nacc: let me know if that is not true and I'll start help hacking fixes | 08:38 |
cpaelzer | nacc: but it seems more like a push of a 3/4 complete redesidn to the single usd tool | 08:39 |
cpaelzer | nacc: so I wait for your reply | 08:39 |
=== quantums_ is now known as quantums | ||
=== m1dnight2 is now known as m1dnight | ||
=== m1dnight is now known as m1dnight_ | ||
=== quantums_ is now known as Guest63238 | ||
=== Guest63238 is now known as quantums | ||
rbasak | nacc: using the latest importer seems to want it to start squid3 from the beginning again. Going back to b66306b works. | 11:22 |
cpaelzer | rbasak: I also had some issues with the latest one reported to nacc this morning | 11:28 |
SipriusPT_ | hello guys, i am getting this error per mail, when i am using getmail to reroute for postfix | 12:24 |
SipriusPT_ | Delivery error (command sendmail 27293 error (127, exec of command sendmail failed (refuse to invoke external commands as root or GID 0 by default))) | 12:25 |
SipriusPT_ | i am using sendmail to send locally to postfix | 12:25 |
SipriusPT_ | here is the getmailrc | 12:25 |
SipriusPT_ | http://pastebin.com/nwL6mwvA | 12:26 |
SipriusPT_ | anyone knows how to solve this? | 12:26 |
patdk-lap | not without logs, no | 12:26 |
SipriusPT_ | that is the error that i am getting at getmail log | 12:27 |
patdk-lap | but a guess is | 12:27 |
patdk-lap | your running as root | 12:27 |
SipriusPT_ | yes | 12:27 |
patdk-lap | why? | 12:27 |
SipriusPT_ | because i have email passwords in getmail config | 12:29 |
patdk-lap | what does that have to do with anything? | 12:29 |
patdk-lap | you should not run programs as root | 12:30 |
patdk-lap | "refuse to invoke external commands as root" | 12:31 |
SipriusPT_ | it could be for some kind of protection?! | 12:32 |
coreycb | jamespage, beisner, hello, python-glance-store and mistral are ready to promote from newton-staging->newton-proposed | 12:57 |
jamespage | coreycb, done | 12:59 |
coreycb | jamespage, thanks | 12:59 |
yakim | Hello! Somebody know soft for centralized management luks crypto containers? | 13:06 |
coreycb | jamespage, nova neutron and neutron-lbaas are ready to promote to mitaka-updates | 13:22 |
zul | coreycb: fu...https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-zesty/zesty/amd64/h/heat/20161109_213238_ca694@/log.gz | 13:36 |
coreycb | zul, you're all over that right ? :) | 13:37 |
zul | coreycb: yeah | 13:37 |
coreycb | zul, thanks | 13:37 |
* zul enters ninja mode | 13:37 | |
=== JanC is now known as Guest87424 | ||
=== JanC_ is now known as JanC | ||
danpawlik | Hello, Is it possible to move all of Openstack watcher service packages from zesty repo to xenial repo? | 15:21 |
=== blacknred0 is now known as Guest82234 | ||
=== blacknred0_ is now known as blacknred0 | ||
falco | hello everybody!! Are there some postfix admin? | 15:36 |
nacc | rbasak: cpaelzer: will check those out now | 15:40 |
nacc | cpaelzer: i think i just pushed the fix now | 15:43 |
nacc | cpaelzer: sorry, you might have missed the messages last night -- the rewrite is 'complete', but it was a huge set of changes, so please do send me patches or point out issues here | 15:44 |
nacc | rbasak: and i see what is wrong with the import, will fix shortly | 15:47 |
cpaelzer | nacc: ok so I'll refetch next time and see if all is ok then | 16:02 |
cpaelzer | nacc: I'm done with the merge (except review) that caused this and not picking another this evening | 16:03 |
nacc | cpaelzer: sure, sorry about htat | 16:05 |
rbasak | cpaelzer: reflog FTW. I just wound back this morning :-) | 16:10 |
Braven | Does anyone know how to exit a ipmitool session | 16:11 |
rharper | control-d ? | 16:12 |
rharper | or if like telnet control-] | 16:12 |
rharper | been a while | 16:12 |
quantums | Braven: try ~. | 16:13 |
rharper | some of them also do it like ssh ; enter ~. | 16:13 |
Braven | just hold that down | 16:13 |
Braven | I am having a hard time getting a console log.. I can see everything until the server boot to the maas commissioning image | 16:15 |
RoyK | a netconsole can help | 16:17 |
Braven | Royk: Thanks I will look at that | 16:25 |
nacc | rbasak: should be fixed now | 16:34 |
nacc | rbasak: i apologize, just a nuance of how pygit2 handles remotes | 16:34 |
rbasak | np! | 16:35 |
caribou | nacc: rbasak: do we still need to request git imports for merges by email or it is now done automagically ? | 16:43 |
rbasak | caribou: still need to request by email, sorry. | 16:44 |
caribou | rbasak: no need to be sorry, was just checking | 16:45 |
nacc | caribou: yeah, we're very close to having it 'just work', but still manual for now | 16:48 |
jamespage | coreycb, release those mitaka updates (plus a few others for sec stuff) | 17:00 |
coreycb | jamespage, thanks | 17:00 |
jamespage | coreycb, and sweep staging -> proposed once that was done | 17:00 |
jamespage | qemu, neutron python-os-brick | 17:01 |
zul | coreycb: hey just looking through the cloud archvie oslo.config needs python-rfc8439 so im waiting for the backport-pacakge job to run | 17:03 |
coreycb | zul, ok | 17:03 |
bananapie | I have a new software raid array ( mirror 1 ). resync=DELAYED. Because it hasn't resynced. Given that I just wrote a brand new filesystem, is there any way to make it sync fasteR? | 19:38 |
station | ld i use virtual machine on my server to have nextclou, i'm new to server, selfhosting | 19:44 |
station | the vm is only ment for testing or can it alsow be deployt | 20:03 |
sarnold | station: most of the modern internet runs entirely on VMs -- see AWS, GCE, etc. :) | 20:06 |
station | so if i share netwark to the vm dose it alsow have to deal with the firewall of the hostOS | 20:09 |
ddellav | coreycb: i pulled down pbr and added it to my ppa but I'm still getting the same version suffix error with keystone. Any ideas? | 20:26 |
coreycb | ddellav, from monday: http://paste.ubuntu.com/23457935/ | 20:57 |
ddellav | coreycb yes, as i just said i pulled as you suggested but it still isn't working | 20:58 |
ddellav | did it work for you? | 20:58 |
coreycb | ddellav, you pulled keystone? | 20:58 |
ddellav | coreycb oh you meant pull down keystone, no i didn't pull it i had changes. I will do that | 20:59 |
ddellav | coreycb excellent, i was able to update it finally. Please review and push lp:~ddellav/ubuntu/+source/keystone | 21:41 |
=== skeezix-hf is now known as Ofir | ||
=== Ofir is now known as skeezix-hf | ||
bananapie | top is showing a slow increase of memory ( every 30 minutes, another gigabyte is taken ). ps aux --sort --rss shows that none of my processes are changing significantly in their memory consumption. slabtop says the kernel is using 99.2% of it's 578 mb of ram. So I have at least two gigabytes of memory that is unaccounted for | 21:56 |
bananapie | how do I find who is using the memory? | 21:57 |
tarpman | bananapie: cache? buffers? a tmpfs? | 21:57 |
bananapie | I unmounted all the tmpfs other than /run, which says 1.1M out of 1.2G | 21:59 |
bananapie | 26644 buffers | 21:59 |
bananapie | 12292428 total, 6530716 used, 5761712 free \n 5410544 cached Mem | 21:59 |
bananapie | ok | 22:00 |
bananapie | looks like it's the cached Mem | 22:00 |
bananapie | I have had 9 OOM conditions on this machine today, which has caused data loss in MySQL server. So I thought it was happening again | 22:00 |
bananapie | thanks :d | 22:00 |
bananapie | I ran free && sync && echo 3 > /proc/sys/vm/drop_caches && free | 22:02 |
bananapie | and it cleared up 5 gigs | 22:02 |
tarpman | cached memory isn't a bad thing - it will be dropped instantly if anything actually needs it | 22:02 |
tarpman | you want to look at the second line in free - the -/+ buffers/cache line | 22:03 |
bananapie | I know it's a good thing. I just didn't realize it counted in used memory | 22:07 |
tarpman | http://www.linuxatemyram.com/ :) | 22:07 |
coreycb | ddellav, does that fix the 2 test failures? | 22:13 |
ddellav | coreycb i saw no test failures. Let me look again | 22:24 |
ddellav | coreycb builds without issue in zesty. Cannot build in xenial, missing coverage and pyldap deps | 22:36 |
ddellav | and i did use the sbuild-ocata helper | 22:37 |
bananapi | is there a way to build a new linux software array that doesn't require 'resync' ? | 22:50 |
=== skeezix-hf is now known as Ofir | ||
=== Ofir is now known as skeezix-hf |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!