| znf | Hello. | 01:49 |
|---|---|---|
| znf | How would I change the ethernet address (mac address) on a ubuntu server 16.04? | 01:50 |
| znf | I tried the "old" way of passing hwaddress ether in /etc/network/interfaces under the specific ethernet port, but that just left me with an unaccesible box | 01:50 |
| znf | now I need to do it on a 2nd server, and I'm kind of scared to try the same thing | 01:51 |
| NickNackName | Hi everyone! I am having an issue that is preventing server 16.04.1 from starting on my ThinkServer RS210. I believe it might be an issue with it's older uEFI, but I see no option to enable legacy BIOS only. 14.04 works perfectly, as well as Proxmox 3.3. I was wondering if anyone had success running 16.04 on this model of server, or had any pointers to help diagnose the issue. Thank you. | 01:57 |
| sarnold | NickNackName: was this an upgrade from a working 14.04? or a fresh installation? (I'm not sure which I would expect to work better, I'd really expect both to be fine..) | 02:01 |
| sarnold | NickNackName: what happens when it tries to boot? | 02:02 |
| NickNackName | I tried both fresh and upgrade. When it tries to boot, it gets to the HDD and just restarts like a boot manager is not installed. | 02:02 |
| NickNackName | (Yes, I selected install grub to the correct disk on install.) I've tried with an external boot manager (grub on a USB) and selected "boot from first hdd" and the same behavior occurs. | 02:03 |
| NickNackName | sarnold: Any ideas? | 02:39 |
| === Mobutils_ is now known as Mobutils | ||
| === JanC is now known as Guest78373 | ||
| === JanC_ is now known as JanC | ||
| fluvvell | I'm trouble shooting a zone transfer issue between two ubuntu servers, I can manually force the transfer by restarting bind on the slave, but its getting denied when the master restarts | 03:55 |
| fluvvell | allow-transfer seems to be ok, its set to the ip of the master | 03:55 |
| patdk-lap | fluvvell, that seems backwards | 04:13 |
| fluvvell | patdk-lap, tell me about it | 04:14 |
| patdk-lap | why would you allow-transfer to the master? the master is the master | 04:14 |
| fluvvell | wait | 04:15 |
| fluvvell | I've mis-typed, | 04:15 |
| fluvvell | allow transfer is set on the master to the ip of the slave | 04:16 |
| patdk-lap | both ipv4 and ipv6 addresses? | 04:16 |
| fluvvell | and on the slave, the master is listed correctly as the ip of the master | 04:16 |
| fluvvell | only ipv4 | 04:16 |
| fluvvell | but restarting the master does not push updates out to the slave. Should it? | 04:18 |
| patdk-lap | no | 04:18 |
| patdk-lap | why should it? | 04:18 |
| patdk-lap | the slave only requests them, to make sure it's not outdated when it starts | 04:19 |
| fluvvell | because I've update it | 04:19 |
| patdk-lap | the master has no idea what the slave has, or cares | 04:19 |
| patdk-lap | you restarted the master though, how does it know? | 04:19 |
| fluvvell | oooh oh. | 04:19 |
| patdk-lap | you did use nsupdate to update it right? | 04:19 |
| patdk-lap | and you do have notify turned on? | 04:19 |
| patdk-lap | you do not just EDIT the files, use nsupdate | 04:19 |
| patdk-lap | not if you want it to notify your slaves | 04:20 |
| fluvvell | I've just been reading about notify | 04:20 |
| fluvvell | It would appear not. | 04:20 |
| fluvvell | oh, nsupdate. | 04:20 |
| fluvvell | wow, I've hand edited for years. | 04:22 |
| fluvvell | {bow} thank you, reading https://debian-administration.org/article/591/Using_the_dynamic_DNS_editor_nsupdate | 04:22 |
| fluvvell | now | 04:22 |
| fluvvell | patdk-lap, where does notify go ? | 04:24 |
| fluvvell | I was reading about allow-notify, which is not what I'm wanting is it? | 04:24 |
| patdk-lap | allow-notify goes in the slaves | 04:25 |
| patdk-lap | then notify yes, in the master | 04:26 |
| fluvvell | I'm pretty much using the same two nameservers for all my zones, can it be in the opening stanza rather than in each zone? | 04:27 |
| patdk-lap | yes | 04:27 |
| fluvvell | warnings in the nsupdate manual about not editing by hand... am I going to screw up if I switch to nsupdate? | 04:30 |
| fluvvell | I mean when | 04:30 |
| hades007 | Hi, I need help with apparmor | 05:17 |
| cncr04s | ask the question | 05:19 |
| hades007 | I need to put a profile in complain mode but I don't have aa-complain | 05:20 |
| hades007 | I use ubuntu core 15.04 thats why | 05:20 |
| hades007 | I tried this sudo apparmor_parser -rC /var/lib/snappy/seccomp/profiles/lxd_lxc_2.0.5-1 but it doesnt work | 05:21 |
| hades007 | sudo apparmor_parser -rC /var/lib/apparmor/profiles/click_lxd_lxc_2.0.5-1 I mean | 05:26 |
| === cpaelzer_ is now known as cpaelzer | ||
| === nchambers is now known as God | ||
| === God is now known as nchambers | ||
| === amoralej|off is now known as amoralej | ||
| seyeongkim | Could somebody please sponsor this LP? https://bugs.launchpad.net/nova/+bug/1298061 Liang Chen quit. found nobodt touched long time. | 10:25 |
| ubottu | Launchpad bug 1298061 in nova (Ubuntu Trusty) "nova should allow evacuate for an instance in the Error state" [Medium,In progress] | 10:25 |
| coreycb | jamespage, zul: i'm starting to wonder if we should backport debhelper 10 to the ocata uca | 12:38 |
| zul | coreycb: it probably would make life easier for us | 12:39 |
| zul | coreycb: btw happy birthday ;) | 12:39 |
| coreycb | zul, oh thanks :) | 12:39 |
| coreycb | zul, ok going to try backporting that | 12:43 |
| zul | coreycb: do it locally first just in case things dont blow up | 12:43 |
| coreycb | zul, it'll land in the staging ppa first so it's sort of a testing grounds anyway | 12:44 |
| zul | coreycb: im going to spend some time to get things updated again and make sure things are deployable | 12:46 |
| coreycb | zul, going to start some early testing with the charms? | 12:47 |
| zul | coreycb: yep | 12:48 |
| coreycb | zul, sounds good, thanks | 12:48 |
| === amoralej is now known as amoralej|lunch | ||
| === iberezovskiy|off is now known as iberezovskiy | ||
| cpaelzer | rbasak: thanks for clearing the dovecot-antispam permissions | 13:22 |
| EmilienM | jamespage, coreycb: do you have an ETA for ocata packages in http://ubuntu-cloud.archive.canonical.com/ubuntu/dists/xenial-updates/ocata/ ? | 13:44 |
| coreycb | EmilienM, probably next week | 13:45 |
| EmilienM | coreycb: ack | 13:45 |
| coreycb | jamespage, zul: fyi trying to figure this out. http://paste.ubuntu.com/23516859/ related commit - https://github.com/openstack/xstatic-bootswatch/commit/49c0d56698bc14ae5e5c18cc00c3f2e290d2e724 | 13:47 |
| coreycb | seriously an entire release in one commit | 13:48 |
| zul | coreycb: erm...:) | 13:49 |
| jamespage | coreycb, zul, ddellav: http://reqorts.qa.ubuntu.com/reports/ubuntu-server/cloud-archive/ocata_versions.html is kinda working - something is wonky with the UCA pockets for Ocata | 14:00 |
| coreycb | jamespage, \o/ | 14:02 |
| jamespage | coreycb, I did however revert your upstream version tracker commit | 14:02 |
| jamespage | will deal with that separately | 14:02 |
| coreycb | jamespage, :( | 14:02 |
| coreycb | jamespage, btw IS installed python-git | 14:05 |
| jamespage | coreycb, yeah on wrong server | 14:05 |
| coreycb | jamespage, lol | 14:05 |
| rbasak | cpaelzer: you're welcome! I've also been working on the strongswan review. I've done one pass badly. Now I'm figuring out a better process to do merge reviews and then I'll do it again :-) | 14:16 |
| rbasak | This is probably just about the most complex thing to merge I've seen :-/ | 14:16 |
| === amoralej|lunch is now known as amoralej | ||
| cpaelzer | rbasak: yeah it is an ugly one | 14:23 |
| cpaelzer | rbasak: but it got better this time and last time | 14:23 |
| cpaelzer | so progress - \o/ | 14:23 |
| cpaelzer | rbasak: I tried to do it as linear as possible (like following changelog and such) | 14:23 |
| cpaelzer | rbasak: let me know if you think I can help with this particular merge (not so mcuh with your review process) | 14:24 |
| coreycb | jamespage, zul, the horizon issue may be due to python-django and python-django-compressor not being at upper-constraints | 14:37 |
| ddellav | coreycb zul networking-ovn is updated. Has a depwait in xenial on debhelper lp:~ddellav/ubuntu/+source/networking-ovn | 14:37 |
| coreycb | ddellav, ok thanks, i've backported debhelper 10.2.2 to xenial-ocata | 14:38 |
| coreycb | ddellav, networking-ovn pushed/uploaded | 14:45 |
| ddellav | coreycb ack | 14:46 |
| coreycb | jamespage, zul: not sure what to do, i almost just want to open a bug since we're within the g-r range: http://paste.ubuntu.com/23517114/ | 14:50 |
| zul | coreycb: do it | 14:53 |
| coreycb | zul, jamespage going to try testing with compressor 2.1 first | 15:05 |
| rbasak | cpaelzer: the strongswan merge is spread out across 9 terminal windows, 4 editor buffers in 3 editor windows using all six of my monitors! :-/ | 15:35 |
| rbasak | First time I've usefully used all six for a single task I think. | 15:35 |
| mdeslaur | rbasak: oh, geez, is that the one where we carry a zillion binary packages and debian doesn't? | 15:38 |
| jgrimm | nacc, ERROR:Failed to create local branch (debian/sid). Does it already exist (pass -f)? | 15:38 |
| jgrimm | nacc, I don't recall seeing that before, this is fresh usd pull, and fresh clone/merge | 15:39 |
| jgrimm | rharper -> [paelzer] Enable AIO backend for tgt: DONE | 15:44 |
| rharper | cool! | 15:44 |
| jgrimm | indeed! | 15:44 |
| rbasak | mdeslaur: yes. I have a note to talk about that with you, BTW. We'd like to lose that delta too. | 15:48 |
| mdeslaur | rbasak: me? not sure what I have to do with that :) | 15:51 |
| mdeslaur | rbasak: losing the delta seems like a sane thing to do | 15:51 |
| rbasak | mdeslaur: because I wonder if we're enabling plugins unnecessarily, and what the security quality of those plugins might be. But it's still just a note to myself - it may be fine and I haven't looked yet. | 15:53 |
| mdeslaur | oh, hrm | 15:53 |
| jgrimm | rharper, nacc, smoser, magicalChicken, rbasak, powersj , caribou: irc meeting | 16:00 |
| smoser | o/ | 16:01 |
| frickler | coreycb: jamespage: please have a look at https://bugs.launchpad.net/openstack-ansible/+bug/1624791 if you will, it does not relate to Ansible (we deploy with Chef), but I'm not sure whether to target it to Ubuntu packaging or Horizon upstream | 16:21 |
| ubottu | Launchpad bug 1624791 in openstack-ansible "Horizon randomly fails to connect to the service APIs" [High,Won't fix] | 16:21 |
| jgrimm | caribou, i forgot to ask about https://bugs.launchpad.net/ubuntu/+source/sosreport/+bug/1614052 in meeting | 16:35 |
| ubottu | Launchpad bug 1614052 in sosreport (Ubuntu Xenial) "SOSREPORT need to collect OPAL msglog" [High,In progress] | 16:36 |
| coreycb | ddellav, it looks like swift is blocked on pyeclib autopkgtest failures, if you can shed any light on that: http://people.canonical.com/~ubuntu-archive/proposed-migration/update_excuses.html | 16:56 |
| ddellav | coreycb ill take a look | 16:56 |
| zul | coreycb: just uploaded a fix...libisasl2 is not available on non amd64 | 17:18 |
| coreycb | zul, ok thanks. ddellav ^ | 17:19 |
| ddellav | coreycb zul ack | 17:26 |
| zul | coreycb: ceilometer hasnt cut a b1 release yet? | 17:33 |
| coreycb | zul, i don't know | 17:34 |
| zul | coreycb: it looks like they havent | 17:34 |
| zul | coreycb: ping | 18:05 |
| coreycb | zul, you can just ask your question :) | 18:05 |
| zul | coreycb: its more of a thought than a question...since you backported debhelper this morning it makes sense to bump xenial compat levels in the openstack packages on zesty so things can get built again | 18:06 |
| zul | :) | 18:07 |
| coreycb | zul, i dropped all the ca-patches that lowered debhelper <= 9 | 18:07 |
| coreycb | zul, so either we can rebuild them if they have issues now, or next time they get backported they'll use debhelper 10.2.2 | 18:08 |
| zul | coreycb: yeah but im seeting stuff like this http://pastebin.ubuntu.com/23518079/ | 18:09 |
| coreycb | zul, hmm apache2-dev and dh-systemd weren't patched in ca-patches | 18:11 |
| zul | i think you might need to backport that as well but dont quote me on that | 18:12 |
| === JanC_ is now known as JanC | ||
| coreycb | ddellav, zul, jamespage: tracking the horizon/xstatic issue in bug 1643964 | 18:20 |
| ubottu | bug 1643964 in XStatic-bootswatch "compressing static assets fails with xstatic-bootswatch 3.3.7.0" [Undecided,New] https://launchpad.net/bugs/1643964 | 18:20 |
| coreycb | I was able to recreate it from source so hopefully will get some attention now | 18:21 |
| zul | coreycb: sweet | 18:21 |
| === amoralej is now known as amoralej|off | ||
| zul | coreycb/ddellav: swift should be coming out of proposed soon | 19:51 |
| coreycb | zul, ok | 19:51 |
| coreycb | zul, i think the debhelper issues should be fixed up now. there was a 10.* version recently backported to xenial-backports that was conflicting with the version in xenial-ocata. | 20:07 |
| zul | coreycb: ok | 20:07 |
| zul | coreycb: well see ;) | 20:10 |
| coreycb | zul, yeah | 20:10 |
| zul | coreycb: xenial seems to be building again | 20:45 |
| coreycb | zul, \o/ | 20:45 |
| showaz | hi, how can recovery user/owner ? | 21:38 |
| showaz | chown -hR www-data:www-data /var/www/.* | 21:38 |
| showaz | .* (non bsd .git .composer ) | 21:38 |
| showaz | rsync 2 tree ? | 21:39 |
| nacc | showaz: sorry, what do you mean 'recover'? | 21:55 |
| showaz | nacc: chown -hR www-data:www-data /var/www/.* (../../****) | 21:55 |
| showaz | nacc: dpkg --configure -a | 21:56 |
| showaz | linux /.* glob ./**/* regex / bsd based only \.(*) objects | 21:57 |
| nacc | showaz: sorry, it's still not clear to me what you are asking or doing. | 21:57 |
| nacc | showaz: you recursively changed ownership on /var/www (why are you specifing .* if you are specifing recursive?) | 21:57 |
| nacc | showaz: also waht does (../../****) mean? | 21:57 |
| nacc | showaz: then you reconfigured all packages with dpkg? | 21:58 |
| nacc | showaz: and then you typed a bunch of regex, without any articles in the descriptions, so I have no idea what you were trying to explain | 21:58 |
| showaz | nacc: yes /var/www/* destroy permission owners group/user root dir, its need reconstruct on the basis of *.deb | 21:59 |
| nacc | showaz: so you (accidentally?) recursively changed the permisssons on /var/www? and now what to recreate exactly what the original .deb would have done? | 22:00 |
| showaz | nacc: /var/www/.* -> /var/**/* | 22:01 |
| nacc | showaz: what do you think that syntax means? | 22:01 |
| nacc | showaz: i have no idea what you are trying to say | 22:01 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!