[01:52] <wes18> Need a bit of help. Recently installed xfce/ubuntu on a linux chromebook using crouton. I'm trying to get a canon pixma MG2510 printer working on the system. I have also installed on the system xfce4 print managers. i set the print manager for lpr printing, but printer won't work when i try to print a test document.Also have installed cups, and tried with this too, but localhost:631 is "unable to connect"in firefox
[01:54] <wes18> looking for a bit of help with this please
[02:15] <xangua> !info printer-drivers
[02:15] <ubottu> Package printer-drivers does not exist in yakkety
[02:15] <xangua> !find printer-driver
[02:15] <ubottu> Found: printer-driver-brlaser, printer-driver-c2esp, printer-driver-foo2zjs, printer-driver-foo2zjs-common, printer-driver-gutenprint, printer-driver-hpcups, printer-driver-hpijs, printer-driver-m2300w, printer-driver-min12xxw, printer-driver-pnm2ppa (and 13 others) http://packages.ubuntu.com/search?keywords=printer-driver&searchon=names&suite=yakkety&section=all
[02:15] <xangua> Mmmm that's not it
[02:36] <wes18> Need a hand plse. Recently installed xfce/ubuntu on a chromebook using crouton. Have xfce4 print dialog and print manager installed. Using xfce4 print system settings, checked off cups printing system support for xfprint. Upon entering into browser: localhost:631 the browser indicates "problem loading page"?
[02:38] <wes18> I'm trying to get cups working on this machine.I installed it earlier today and have verified it's on my system.
=== mrkramps_ is now known as mrkramps
=== dreamon__ is now known as dreamon
[15:17] <bones_> Hi people. Could you please help me with the following issue: I have xubuntu 16.04, after suspend it shows me the old time, when I suspended the notebook. What can I do? =)
[15:18] <bones_> (a mouse move in the area of the clock solves the problem)
[15:19] <bones_> I wanted a better solution for it.
[15:28] <StayaSinic> on 1404 same problem.
[15:28] <StayaSinic> when number update - it's fix
[15:28] <StayaSinic> try add sec
[20:42] <xubuntu10d> help
[20:42] <xubuntu10d> exit
[23:15] <kurokashiro> hello
[23:16] <kurokashiro> is anyone around? im struggling to get wireless working on xubuntu
[23:16] <kurokashiro> not even ethernet is working
[23:16] <bazhang> what are the chipsets for those
[23:17] <bazhang> and do they work in the live usb
[23:19] <kurokashiro> what do you mean by chipset?
[23:21] <bazhang> those need drivers
[23:22] <bazhang> the chipsets all have different ones, such as atheros, broadcom 43xx and so on
[23:22] <kurokashiro> i think its realtek
[23:22] <bazhang> verify
[23:23] <bazhang> do they work on the live usb
[23:23] <kurokashiro> and for wireless its a pc and its a wireless adapter
[23:23] <bazhang> again we need the chipset
[23:23] <kurokashiro> netgear n300 wifi usb adapter
[23:23] <bazhang> thats simply the brand
[23:24] <bazhang> you have yet to say if they work with the live usb
[23:25] <kurokashiro> by live usb you mean using a usb to run xubuntu?
[23:26] <kurokashiro> if so then no they dont run
[23:26] <bazhang> booting an iso in live mode, whether by cd or usb
[23:27] <kurokashiro> no they dont run on live usb
[23:27] <bazhang> do you have the machine there, and on, for some troubleshooting
[23:27] <kurokashiro> yes its next to me
[23:28] <bazhang> can you open a terminal
[23:28] <kurokashiro> its open
[23:28] <bazhang> what does ifconfig -a  show in the terminal
[23:29] <kurokashiro> do i take a picture and post a link or just type it out? or is there a specific thing you are looking for?
[23:30] <bazhang> type ifconfig -a
[23:31] <bazhang> done that or not
[23:32] <kurokashiro> it says `enp10s0 link encap:Ethernet HWaddr 30:85:a9:93:89:7d, UP BROADCAST MULTICAST  MTU:1500 Metric: 1, RX packets:0 errors:0 dropped:0 overruns:0 frame:0, TX packets:0 errors:0 dropped:0 overruns:0 carrier:0, collisions:0 txqueuelen:1000, RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[23:33] <bazhang> no lo ?
[23:33] <kurokashiro> there is also a lo
[23:33] <kurokashiro> i type it too?
[23:33] <bazhang> no need
[23:34] <bazhang> what does lspci show, as far as ethernet
[23:35] <kurokashiro> 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
[23:42] <bazhang> !find r8168-dkms
[23:42] <ubottu> Found: r8168-dkms, W:, W:, W:, W:, W:, W:, W:, W:, W: (and 18 others) http://packages.ubuntu.com/search?keywords=r8168-dkms&searchon=names&suite=yakkety&section=all
[23:43] <bazhang> sudo apt install r8168-dkms
[23:44] <kurokashiro> i do that command?
[23:45] <bazhang> correct, but since you have no internet, thats an issue
[23:45] <kurokashiro> could i use a usb?
[23:45] <bazhang> so you need to get the deb and sneakernet it over
[23:45] <knome> or use apt-offline
[23:46] <bazhang> yrpp
[23:46] <bazhang> and yep
[23:47] <kurokashiro> how would i do that?
[23:47] <bazhang> which one
[23:48] <kurokashiro> which ever is more practical
[23:49] <knome> http://docs.xubuntu.org/1610/user/C/offline-packages.html
[23:52] <kurokashiro> so i need another computer with xubuntu on it?
[23:52] <knome> it can be a computer with a live USB running xubuntu too
[23:53] <kurokashiro> could i also use virtual box?
[23:53] <knome> as long as it's online
[23:56] <kurokashiro> @bazhang is this to fix the ethernet?
[23:57] <bazhang> yes
[23:57] <kurokashiro> and then from there i can fix the wireless via downloading drivers through ethernet correct?
[23:58] <bazhang> why not just get the deb on this computer, copy to usb, thne take to the xubuntu machine
[23:58] <bazhang> thats the plan
[23:58] <bazhang> lets try to get the ethernet working first
[23:59] <kurokashiro> what do you mean by deb?
[23:59] <bazhang> r8168-dkms.deb
[23:59] <bazhang> it's a package from packages.ubuntu.com
[23:59] <kurokashiro> so download it to usb and then connect it to the xubuntu machine