[00:00] <ShwnVnrt> would font config reg..   would it be faster if i install font config before DE's?
[00:01] <ShwnVnrt> debootstrap chroot
[00:02] <ShwnVnrt> i also would like to share my Pi2/3 builds  https://sourceforge.net/projects/ultimateedition-ports/files/PiFlavourMaker/
[00:02] <ShwnVnrt> i have a zesty ubuntu studio
[00:53] <ShwnVnrt> cancel questions request... my builds fail faster than i can get replys.. so i can just test my own thoughts.. again thanks...
[00:53] <ShwnVnrt> https://sourceforge.net/projects/ultimateedition-ports/files/PiFlavourMaker/
[13:40] <ZargosLord> hello everyone
[13:41] <cfhowlett> ask your question, ZargosLord
[13:41] <ZargosLord> can someone help me with JACKD? since some days i can't start jackd anymore, it was working fine and now i can start the server jackd but impossible to connect on the server with sqjackctl or anything alse
[13:41] <ZargosLord> sorry not sqjackctl but qjackctl
[13:41] <cfhowlett> ZargosLord, if no answer here, see #linuxaudio
[13:41] <ZargosLord> ok thank for info
[13:41] <cfhowlett> happy2help!
[13:44] <ZargosLord> well, noone on #linuxaudio :)
[13:52] <OvenWerk1> ZargosLord: have you logged out and in sice you have had problemes with jackd?
[13:56] <ZargosLord> i ve done all necessary for jackd for the ulimits configuration
[13:56] <ZargosLord> ulimit -l -r is correct
[13:57] <ZargosLord> but jackd doesn t seems to see it
[13:57] <ZargosLord> it startd, but each time i try to connect it fail
[13:57] <ZargosLord> i have 2 computer with ubuntu studio installed and both have the same behavior
[13:58] <OvenWerk1> ZargosLord: I would have figgered that that was set correctly if it worked before as it seems from your comment, but maybe it has never worked?
[13:58] <ZargosLord> i use driver alsa off course
[13:58] <ZargosLord> it has work as far as 10 days ago
[13:58] <ZargosLord> i've even made a Hydrogen file for 21 pilots song Heathens :)
[13:58] <OvenWerk1> so jack worked up till 10 days ago.
[13:58] <ZargosLord> yes
[13:59] <OvenWerk1> Have you logged out and since that time.
[13:59] <ZargosLord> i think that there was something is an update
[13:59] <ZargosLord> could rthat be the problem with pulseaudio?
[13:59] <ZargosLord> i have restarted at least 10 times :)
[13:59] <ZargosLord> on both computers
[13:59] <OvenWerk1> pulseaudio has not tended to be a problem since about 12.04
[14:00] <OvenWerk1> what os are you running?
[14:00] <OvenWerk1> (16.04, 1610)
[14:00] <ZargosLord> 16.10
[14:01] <OvenWerk1> OK
[14:01] <OvenWerk1> I do not have a copy running here to test.
[14:01] <OvenWerk1> so...
[14:02] <OvenWerk1> lets try: cd /tmp && wget http://jackaudio.org/downloads/adevices.sh && bash ./adevices.sh
[14:02] <OvenWerk1> pastebin.com would be a good place to paste the results and put the url here
[14:03] <ZargosLord> zargos@zargoslp:/tmp$ bash ./adevices.sh  [14:03] <ZargosLord> oops :)
[14:04] <ZargosLord> http://pastebin.com/L7EEMJkr
[14:07] <ZargosLord> http://pastebin.com/5wMwmCpA
[14:07] <OvenWerk1> ok try jack_control ds alsa dps capture none dps playback none
[14:07] <ZargosLord> this one is better as it include my iRigUA connected to USB as i'm using jack with qjackcontrol with Calf or rakarrak
[14:08] <ZargosLord> zargos@zargoslp:/tmp$ jack_control ds alsa dps capture none dps playback none --- driver select "alsa" --- driver param set "capture" -> "none" --- driver param set "playback" -> "none"
[14:08] <ZargosLord> and it stopped
[14:08] <ZargosLord> my ps -eaf | grep -i jack gives me
[14:09] <ZargosLord> zargos   18413 17123  0 12:21 ?        00:00:02 /usr/bin/jackdbus auto
[14:09] <ZargosLord> nothing else
[14:09] <OvenWerk1> Which should sort of reset some things. then jack_control dps device hw:UA dps rate 48000 dps period 1024  dps nperiods 2 start
[14:10] <ZargosLord> zargos@zargoslp:/tmp$ jack_control dps device hw:UA dps rate 48000 dps period 1024  dps nperiods 2 start --- driver param set "device" -> "hw:UA" --- driver param set "rate" -> "48000" --- driver param set "period" -> "1024" --- driver param set "nperiods" -> "2" --- start
[14:10] <ZargosLord> and same as ps -eaf | grep -i jack
[14:10] <ZargosLord> only dbus
[14:11] <ZargosLord> http://pastebin.com/STUcK0ur
[14:12] <ZargosLord> in ~/.jackdrc i have
[14:13] <OvenWerk1> So if you start qjackctl it should show that jack is already running
[14:13] <OvenWerk1> if you hit the connections button you should see your device.
[14:13] <ZargosLord> yes i have launch qjackctl and i see all connexion in the gui
[14:15] <OvenWerk1> ZargosLord: qjackctl is set up by default to use jackdbus rather than jackd
[14:15] <ZargosLord> but i hear no sound
[14:16] <ZargosLord> i see in calf the audio meter moving when i play my guitar :)
[14:16] <OvenWerk1> ZargosLord: where did you expect to hear sound from?
[14:16] <ZargosLord> gutar connected to iRigUA then sent through jacjd in calf then from calf to playback
[14:17] <OvenWerk1> playback is the iRigUA as well?
[14:17] <ZargosLord> lol yes :)
[14:17] <ZargosLord> i bve just see than too :)
[14:17] <ZargosLord> i m doing  what necessaery
[14:17] <ZargosLord> as sometime i use computer playback instaed
[14:17] <OvenWerk1> Just checking, I get a lot of people try to do input on one device and output on another...
[14:18] <ZargosLord> yes it is working with external HP
[14:18] <ZargosLord> yes usually i configure with hw:UA in input and hw:Intel in output
[14:19] <OvenWerk1> That should fail
[14:19] <OvenWerk1> The two will not be in sync
[14:20] <ZargosLord> i have some msec difference yes
[14:21] <ZargosLord> so i have to understand what have been done ;)
[14:21] <OvenWerk1> If you want output to the internal... yu can try zita-j2a -j internal  -d hw:0  -r 48000  -p 128  -n 2 &
[14:22] <OvenWerk1> And you should see output connection appear that is called internal.
[14:22] <ZargosLord> yes i see it :)
[14:23] <OvenWerk1> to lower delay, try  jack_bufsize 128
[14:24] <ZargosLord> yes that part i know it :) it is actually better that what i had used before when it worked
[14:24] <ZargosLord> i'll have to note everything
[14:25] <ZargosLord> i had used rate of 44100 instead of 48000
[14:25] <OvenWerk1> ZargosLord: your choice on that. my audio card sounds better at 48k
[14:26] <ZargosLord> i'll try both to see :)
[14:26] <OvenWerk1> ZargosLord: the internal HDA audio runs internally at 48k anyway.
[14:26] <ZargosLord> that actual comp is a laptop ASUS n75sf and the otehr is a Dell Optiplex 755
[14:27] <ZargosLord> i was not skilled with zita-j2a, i just start all of this :)
[14:27] <ZargosLord> i switch from ubuntu to ubuntu studio with full reinstall as sometime the Amplitube 4 Windows application for iRigUA is not completly giving all what i need
[14:28] <OvenWerk1> I am working on a utility to make this stuff easier, but it looks like I won't be done in time for 17.04
[14:28] <ZargosLord> i have noted the command to loo kat doc to understand what you made me done
[14:29] <ZargosLord> i didn t use much jack_control until today
[14:29] <OvenWerk1> everything I did with jack_control, qjackctl should be able to do as well. I used it here because it is easier than asking about each setting in qjackctl.
[14:30] <ZargosLord> yes indeed :)
[14:30] <OvenWerk1> it seems the big thing is trying to use a different input and output in you r setup.
[14:30] <ZargosLord> jeck_control is easier for me to understand what i'll set in qjackctl
[14:30] <ZargosLord> yes i 've understand that
[14:31] <ZargosLord> and in qjackctl what is difficult is to understand what appear in connxions as all appear as capture with number and playback same
[14:31] <ZargosLord> so sometime i hadn't see which one is who
[14:32] <ZargosLord> but your trick with zita help alot
[14:32] <OvenWerk1> If you normally run with the USB IF not plugged in, then you can set internal as the main device and use zita-a2j to connect the input of the USB IF when it is plugged in.
[14:32] <ZargosLord> on the Dell optiplex it is an external HP as there isn't any internal in the desktop
[14:32] <ZargosLord> but i see the difference
[14:33] <ZargosLord> as iRigUA is hw:0,1 and external HP is hw:0,0
[14:33] <ZargosLord> maybe i shouldn't use names as hw:UA and hw:Intel
[14:34] <OvenWerk1> Names are normally better... it depends in everything is plugged in at boot then the order of audio may change from boot to boot
[14:35] <OvenWerk1> This used to be a thing with internal PCI cards
[14:35] <OvenWerk1> With USB the order that you plug things in matters of course.
[14:37] <ZargosLord> yes normal, i ve always used normally, as the external HP are jacked in the audio jack port, so i usually have only my iRig on USB and HP on jack
[14:41] <OvenWerk1> everyones setup is different. I still use PCI cards.
[14:41] <OvenWerk1> Even one with a gameport for MIDI
[14:42] <ZargosLord> :) i still have such devices at home :)
[14:44] <ZargosLord> i can use the post-start config in qjackctl to setup zita i thnk
[14:44] <ZargosLord> i have another to send pulseaudio too
[14:44] <ZargosLord> thus i can have at the same time firefox playing sound while i i play my guitar, for cover practice for example
[14:45] <OvenWerk1> if things get complex, it may be easier to create a script file and just call that.
[14:46] <OvenWerk1> Ya, I use http://www.ovenwerks.net/paste/autojack at session start
[14:47] <ZargosLord> nice script :)
[14:47] <ZargosLord> i've not yet dig in all this stuff to do some like that
[14:48] <ZargosLord> but could be usefull to have correct interface name setup to use in qjackctl
[14:48] <ZargosLord> instead of capture1/2/3/4/5/6
[14:49] <OvenWerk1> The main interface will always have system capture/playback that is hard coded into jack
[14:49] <ZargosLord> oh glad to know, i didn t before
[14:49] <ZargosLord> at least if only these one it coudl be ok
[14:50] <ZargosLord> in qjackctl you can rename interface
[14:50] <OvenWerk1> mine has inputs 1-12 and outputs 1-10. in both cases I use 1-4 and 9-10 only because the unit is 6i/o
[14:50] <OvenWerk1> but it uses the same internal chip as the delta 1010 which is 10i/o
[14:52] <OvenWerk1> yes, qjackctl will allow to name i/o but the new names don't seem to show up in other jack related programs.
[14:52] <ZargosLord> no i've seen that already, bu as i make my conexions tyhrough only qjackctl when i use it it is not a shame
[14:54] <ZargosLord> seem my UA card is particular with your script, but i'll be able to modify for desire needs :)
[14:54] <ZargosLord> some times i didn't do any shell script, but it is like bike, when learnt it once you can always do it again
[14:54] <ZargosLord> (sorry french translated to english for that last one ;) )
[14:55] <OvenWerk1> If your USB card is plugged when this is run it will still show up... somewhere.
[14:55] <OvenWerk1> That is basically a trial to see how solid it is/runs. I have been using it for a year with no problems.
[14:56] <OvenWerk1> It looks for any card and hooks it up. But I am woking on a config utility that would only start what the user wants.
[14:57] <OvenWerk1> I have worked with so many people who get a USB mic and get mixbus for free with it and want output sound on theinternal audio... I want it automated :)
[14:58] <ZargosLord> :) would same some time, for you ;)
[14:59] <OvenWerk1> it would be a lot less frustrating for new people too.
[15:00] <ZargosLord> i've just see that you re working on Ardour, and some other stuff :)
[15:01] <OvenWerk1> control surfaces mostly and right now some documantation fixes.
[15:01] <OvenWerk1> I think some of the manual is still Ardour 3ish
[15:02] <ZargosLord> i've started a very little test with ardour, as it is a quite compete and hard to master sofware, but very interesting
[15:02] <ZargosLord> :)
[15:03] <ZargosLord> my Amplitube 4 can register 8 tracks, but the effets (stomp, Amp, Cab, rack and insert) are not registered wiht. Itis because that way you can still have what you've played while changing the effects configuration
[15:03] <ZargosLord> iRigUA is good stuff, when i'll have enough money i thing i'll buy the new one IRigUA2
[15:04] <ZargosLord> well, good at least for me, i m a casual self learning electric guitar player
[15:05] <OvenWerk1> Looks a lot like the mod duo
[15:05] <OvenWerk1> https://moddevices.com/
[15:07] <OvenWerk1> Anyway I need to go get kids ready for school (7.06 am here)
[15:07] <ZargosLord> yes, iRigUA+Amplitude does the same
[15:07] <ZargosLord> 4:00 pm here, my daughter will be back from school in 1 hour :)
[15:07] <ZargosLord> nice to meet you here, and thank you very much :)
[15:08] <ZargosLord> i'll keep reference of you :) can be interesting to have some discussion once in a while, and i can have some musician here in Tours/France that could be interested by your works
[16:14] <ZargosLord> back