[00:00] <Mchammerdad> Heres the Scenario, I have a AP on the network that has a static IP on some random subnet, its acting as a bridge only. No dns/dhcp/default gateway, pure layer 2 as far as I can tell. How can I find its IP address without factory resetting the whole setup.
[00:02] <OerHeks> Mchammerdad, is this your homework?
[00:03] <Mchammerdad> oerHeks, it is atleast if you consider thats this is at my house.
[00:04] <OerHeks> You would be ble to see this rule in your router
[00:05] <OerHeks> at least a connected mac adress
[00:06] <drnobody> hi
[00:06] <drnobody> am i muted 0.o\
[00:07] <drnobody> can anyone hear me?
[00:07] <Mchammerdad> we can see you.
[00:07] <drnobody> oh
[00:07] <drnobody> good
[00:16] <Eric_____> hi
[00:16] <drnobody> hello
[00:16] <Eric_____> ubuntu loading dots
[00:16] <Eric_____> it took long time
[00:17] <drnobody> What version do you have?
[00:17] <Eric_____> im on win 10
[00:17] <drnobody> VM?
[00:18] <Eric_____> i has ubuntu iso on my usb flash already
[00:18] <drnobody> Shouldnt use a flash drive
[00:18] <drnobody> It will wear out really fast
[00:19] <drnobody> Unless you want it to be temperary?
[00:19] <Eric_____> i want a dual windows 10 and ubuntu on one laptop
[00:19] <drnobody> Then why not use an external hard drive
[00:19] <Eric_____> what that external?
[00:20] <drnobody> It would last a lot longer and in the long run would be cheaper then buying usbs left and right
[00:20] <drnobody> However Depending on ram and hard drive space you could also run a virtual machine that would do the same job but on the same hard drive
[00:21] <drnobody> so that would be the cheapest option
[00:21] <Eric_____> i has 64 GB Usb Flash
[00:22] <drnobody> yea your using the usb like a hard drive
[00:22] <drnobody> but there is to much reading and wrighting
[00:22] <drnobody> it will wear it out
[00:22] <drnobody> currupt all your data
[00:22] <radeonFAN> my radeon6870 just started reving the fan up full blast when I scroll (browser, etc.), and performance (scrolling) is really bad (< 1fps). has there been any changes to dpm or radeon related stuff over the past week or so?
[00:23] <Eric_____> create new partition?
[00:23] <drnobody> partitions on the drive dont matter
[00:23] <drnobody> it will still wear out
[00:24] <drnobody> my advice to you would be to use a VM. or to get an external hard drive to mess around with
[00:24] <Eric_____> it will still wear out means deleted right?
[00:24] <drnobody> it means your files will be currupted and unrecoverable
[00:24] <drnobody> How much RAM do you have?
[00:24] <drnobody> and what version of ubuntu are you using?
[00:25] <Eric_____> \on my computer?
[00:25] <drnobody> on your USB
[00:25] <drnobody> Yea on your computer where the fuck else would you find ram
[00:25] <Eric_____> how?
[00:25] <drnobody> sorry language
[00:25] <drnobody> lol
[00:25] <drnobody> your using windows ten?
[00:26] <drnobody> ....
[00:26] <drnobody> Go to the Windows search bar and type “My Computer”. You’ll  get “This PC” desktop app, Just right-click on it and choose “Properties”, as shown in the image below.
[00:26] <tatertots> radeonFAN: question is....have YOU installed any newer kernels over the past week or so?
[00:26] <drnobody> No image
[00:27] <drnobody> copy paste i dont use windows
[00:27] <radeonFAN> only the ones that came down the offical update channel. 16.04. I tried flipping back one kernel, but same issue
[00:27] <Eric_____> ram is 2.00 GB (1.89 GB usable)
[00:29] <tatertots> radeonFAN: in terminal>      sudo apt install inxi pastebinit
[00:29] <tatertots> radeonFAN: let me know when its done
[00:30] <drnobody> What ubuntu are you using Eric?
[00:30] <crafty1> tsimonq2, You can either edit using command line or if you prefer a UI look into https://launchpad.net/~danielrichter2007/+archive/ubuntu/grub-customizer
[00:30] <Eric_____> not yet im on win 10
[00:31] <drnobody> i mean what ubuntu do you have?
[00:31] <drnobody> and after its done loading does it seem slow at all or is it just loading that is slow?
[00:32] <Eric_____> Ubuntu 16.04.2 LTS ISO on my usb flash
[00:33] <drnobody> is it just the loading that is slow?
[00:33] <Eric_____> yup
[00:34] <drnobody> My best guess is you did not get a flash drive with a fast enough read write rate. so it takes a while to read the OS.
[00:34] <drnobody> read/right rate
[00:34] <Mathisen> Eric_____, you using usb2 at all or does your computer only have realy old usb1? 2 gb ram tells me your computer is old
[00:34] <drnobody> na he could be using a laptop
[00:35] <Eric_____> old?
[00:35] <Eric_____> im on laptop
[00:35] <drnobody> he is running windows 10 his computer is not that old
[00:35] <drnobody> VM is not ideal for you.
[00:35] <drnobody> btw
[00:36] <Eric_____> my latpop is works grat
[00:36] <Eric_____> great
[00:36] <Eric_____> -_- im dumb lol its laptop
[00:39] <drnobody> Read write rate is my best guess @Eric____
[00:40] <drnobody> I would say definitely get a usb 3.0
[00:40] <drnobody> should increase speed
[00:40] <Eric_____> do i turn fastboot off
[00:41] <Mathisen> or just dualboot linux and win
[00:41] <Mathisen> uefi ? if so turn off fastboot and secureboot to make life easyer for you
[00:41] <drnobody> "easyer"
[00:41] <drnobody> xD
[00:42] <Eric_____>  did turned fastboot off and secureboot is disabled
[00:42] <Mathisen> and now you want to install ubuntu ?
[00:42] <Eric_____> yup
[00:43] <Eric_____> dual win 10 nd untuntu
[00:43] <Mathisen> i would boot your win again and resize partition there before starting install just to be on safe side
[00:43] <Mathisen> so you have empty space that ubuntu can use
[00:44] <Eric_____> how resize partition where?
[00:44] <drnobody> xD the same way you created it
[00:44] <Eric_____> dik manager?
[00:44] <Eric_____> disk
[00:45] <Mathisen> run diskmanager in win 10.. win + r "then type" diskmgmt.msc
[00:45] <drnobody> dik manager is the way to goooo
[00:47] <Eric_____> i start type run then typed diskmanager.msc
[00:47] <Mathisen> yep
[00:48] <Eric_____> its said invaild
[00:48] <drnobody> RIP
[00:48] <Mathisen> Eric_____, diskmgmt.msc
[00:48] <Mathisen> not diskmanager..
[00:49] <Eric_____> loll im dumb
[00:49] <BustyLoli-Chan> Has anyone here build Android Open Source Project (or similar android projects) on the latest ubuntu?
[00:50] <Eric_____> im on disk management then what i do next?
[00:53] <drnobody> LOL
[00:53] <drnobody> diskmgmt.msc
[00:53] <Eric_____> what?
[00:53] <drnobody> apparently
[00:53] <drnobody> according to mathisen
[00:53] <drnobody> i use kali
[00:53] <Mathisen> Eric_____, just resize the partition
[00:53] <drnobody> idfk
[00:53] <Eric_____> shrink?
[00:53] <Mathisen> yes
[00:55] <Eric_____> mathisen it said total size shrink in mb 476438
[00:55] <Mathisen> Eric_____, i cant say how mutch you gonna shrik it with depends on how mutch room you want for ubuntu
[00:56] <crimzicz12> hello everyone :)
[00:56] <Eric_____> size of avalible shrink space in mb 237304
[00:56] <crimzicz12> just started using Ubuntu this morning :)
[00:56] <Eric_____> total size after shrink in mb 239134
[00:58] <Mathisen> crimzicz12, good for you :)
[00:58] <viju> Hi guys
[00:59] <viju> The screen automatically turns off after 2-3 seconds, it doesn't lock though. 16.04
[00:59] <viju> Ubuntu 16
[00:59] <BustyLoli-Chan> how much faster is the torrent download if at all?
[00:59] <viju> I don't want it to turn off after idling that short period.
[01:01] <BustyLoli-Chan> update: the torrent is way faster....
[01:01] <BustyLoli-Chan> like 2 minutes vs 1 hour faster
[01:02] <Eric_____> mathein?
[01:03] <Eric_____> mathesin?
[01:03] <Mathisen> viju, checked the power settings ?
[01:04] <goldfinger> Does mark shuttleworth ever come in here?
[01:04] <Eric_____> how much shrink?
[01:04] <crimzicz> shrink?
[01:04] <Mathisen> Eric_____, depends on how mutch room you want for ubuntu
[01:05] <crimzicz> what is the question?
[01:05] <crimzicz> i would like to help :)
[01:05] <Eric_____> 10000 or 20000?
[01:06] <Mathisen> Eric_____, only you know that...
[01:06] <toothe> i installed a new kernel the Ubuntu way but still do not have ZFS. the module doesnt seem to install with apt-get.
[01:06] <toothe> i give up on installing my kernel the Ubuntu way.
[01:06] <toothe> its broken
[01:07] <Eric_____> ill entered 3704 Mb
[01:07] <viju> Mathisen: I have set it to do not suspend for inactivity
[01:08] <Mathisen> viju, open terminal and do " xset -dpms "
[01:09] -iahmw:#ubuntu- #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGP
[01:09] <viju> Mathisen: does that have to with dual monitor settings?
[01:09] <fictgp> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLAN
[01:09] <fictgp> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLAN
[01:09] <fictgp> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLAN
[01:09] <fictgp> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLAN
[01:09] <oqglx> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGP
[01:09] <rfskkut> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANE
[01:09] <aukgs> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPL
[01:09] <quivd> #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLANET #WRONGPLAN
[01:09] <crimzicz> thats stupid of people
[01:09] <Mathisen> !ops
[01:10] <Mathisen> viju, no it is display power management signals
[01:11] <elky> Mathisen: the bot is better at getting them than we are thankfully
[01:12] <viju> Thanks Mathisen
[01:13] <Mathisen> np
[01:16] <Menzador> All right, excitement's over, let's get back to support.
[01:16] <gtkminh> hello
[01:16] <gtkminh> i am a new ubuntu
[01:17] <Bashing-om> !manual | gtkminh
[01:19] <ladd> hola mundo
[01:20] <Bashing-om> !es | ladd
[01:21] <gtkminh> i use ubuntu for develop app
[01:21] <Eric_____> hey?
[01:22] <Eric_____> mathsen?
[01:22] <goldfinger> what do you develope?
[01:22] <gtkminh> website and application for android
[01:24] <goldfinger> cool man
[01:25] <Eric_____> prooboy?
[01:26] <Eric_____> mathesen?
[01:27] <Eric_____> mathisen?
[01:27] <gtkminh> Eric:wwat?
[01:27] <Eric_____> gtminh u talking to me?
[01:29] <Eric_____> hey gtminh?
[01:39] <Eric_____> anyone?
[01:39] <Eric_____> i shrink mb in patrition manager for ubuntu
[01:39] <Eric_____> i entered 10240 Mb
[01:40] <Eric_____> then what i d next?
[01:40] <Eric_____> do
[01:44] <Eric_____> -_-
[01:44] <Eric_____> anyone?
[01:50] <_pepe> Hey all, getting a freeze at login. mouse freezes, keyboard flashes. 90% positive this is a wifi issue when trying to connect
[01:50] <_pepe> kernel 4.4.0.62 is last working one
[02:08] <userdelat> hello Members, I need help for hard disk. I have just installed fresh linux OS and I swap the hard disk to this system and now I m getting error non system disk
[02:08] <userdelat> the hard disk display as /dev/sdb1/2/3
[02:10] <scorpiusZ> Hello I am on ZorinOS and it wont star windows10 how do I make Windows10 primary boot?
[02:11] <bazhang> scorpiusZ, ask zorin support
[02:11] <scorpiusZ> Where do I find them?
[02:11] <bazhang>  /msg alis list zorin
[02:13] <userdelat> bazhang, any help for harddisk display as /dev/sdb (usb)
[02:13] <bazhang> userdelat, ask the channel, full details please, on a single line
[02:14] <bazhang> if someone knows they will assist userdelat
[02:15] <scorpiusZ> 1739 Ubuntu Zorin 6 I should of installed Ubuntu and since I cant get help here Im SOL i thought linux was linuz and commands were same in terminal?
[02:16]  * scorpiusZ waves goodbye
[02:16] <userdelat> Install successful Linux OS on device -- detached hard disk and plugin into this device but at start it display non system disk error and with live usb hard disk display as /dev/sdb?
[02:19] <userdelat> Install successful Linux OS on device -- detached hard disk and plugin into this device but at start it display non system disk error and with live usb hard disk display as /dev/sdb?
[02:20] <BustyLoli-Chan> my ubuntu VM just keeps flat out freezing
[02:20] <BustyLoli-Chan> at one point is was like... the guest operating system has turned off the CPU
[02:20] <BustyLoli-Chan> how do I figure out why this is happening?
[02:22] <BustyLoli-Chan> I think it locks up when I tab out of the machine?
[02:32] <leviticus> hi
[02:33] <leviticus> i got this N: Ignoring file '50unattended-upgrades.ucf-dist' in directory '/etc/apt/apt.conf.d/' as it has an invalid filename extension
[02:33] <leviticus> how do I fix this?
[02:34] <tatertots> BustyLoli-Chan: are you chatting from the ubuntu system right now?
[02:37] <BustyLoli-Chan> No, I'm on the windows host
[02:39] <Bashing-om> userro: What pops to mind, the install was on a UEFI system, and transfered to a legacy system ?? Boot code is incompatible .
[02:41] <userro> uh
[02:41] <userro> why are you asking me?
[02:42] <Bashing-om> userro: Sorry bad tab hilight on my part :(
[02:47] <R0b0t1> Hello, is there a channel for Ubuntu release engineering or whatever the term is? I would like to know how ARM packages are built.
[02:49] <BustyLoli-Chan> guess I just reinstall :|
[02:50] <BustyLoli-Chan> just kidding may have already froze......
[02:51] <BustyLoli-Chan> Maybe I'll see if 16.04 does any better
[02:52] <Menzador> R0b0t1: #ubuntu-devel
[02:52] <R0b0t1> Menzador, thanks!
[03:04] <axisys> any suggestion on troubleshooting sound.. live cd works fine..
[03:11] <Bashing-om> !sound | axisys
[03:13] <axisys> I know it is a driver issue and something disabling it in modprobe.d .. I did not check the alsa.opensrc.org ... but I did check the rest and did not help.. aplay -l shows the card
[03:14] <axisys> let me go through them again.. incase I missed a line.. thanks
[03:14] <plebscum> hi all, I am having a problem preventing xubuntu 16.04 from turning the monitor off after inactivity
[03:15] <plebscum> I have tried changing the power manager settings and using the program caffeine, neither helped. Any ideas?
[03:23] <antonykerr> hello
[03:25] <jiffe> why would apt-file list <package> come up empty?
[03:32] <pauljw> jiffe, try "apt list <package>", no quotes...
[03:32] <geebee16> Hi. I have a 16GB mSata (2242) SSD and i want to install Linux onto it. If my PC has 16GB of ram, how much swap space will i need? Is it even necessary?
[03:32] <tatertots> jiffe: because of <package>
[03:34] <geebee16> anybody?
[03:51] <BustyLoli-Chan> WHAT... vim isn't installed
[03:51] <BustyLoli-Chan> what is wrong with this distro
[03:53] <tatertots> BustyLoli-Chan: that only works for "vi"....you don't get to say that for "vim"...sorry
[03:53] <tatertots> BustyLoli-Chan: and "vi" is installed
[03:54] <TheLexx> I'm booting a distro from an ISO image. The Distro is based on Ubuntu. I believe it uses what you guys call casper. If there a list of standard args that the casper system uses? The kernel and initrd seems to load ok but If doesn't seams to find the ISO file.
[03:54] <TheLexx> Is there a list?
[03:58] <TheLexx> I got the error message unable to find ISO.
[03:58] <Guest62317> help
[03:58] <Guest62317> exit
[03:59] <axisys> still no sound.. here is my alsa details
[03:59] <axisys> http://www.alsa-project.org/db/?f=7e39ef75c7c5d56ca9e960171400668a85b9e677
[04:01] <TheLexx> #ubuntu-dev
[04:06] <djair> hey
[04:06] <djair> anyone can tell me anoult hibernate cruteria?
[04:07] <djair> about*
[04:11] <chris11> can anyone help me to set up a cron job?
[04:11] <chris11> this is what I have: http://pastebin.com/A4GLUzDn
[04:12] <chris11> I want cron to run a script, and the script checks to see if a process is running, if not it starts it.
[04:14] <TheLexx> chris11, I have some experince using cron on other *nix systems
[04:14] <chris11> ok, cool.
[04:16] <chris11> do you see anything wrong with my setup?
[04:18] <TheLexx> I'm not that familiar with Ubuntu controls. Do you know anything about the command line interface?
[04:18] <chris11> a little bit.
[04:19] <chris11> ps ax | grep -v grep | grep $process > /dev/null just searches for a process with the name in hte process variable.
[04:19] <TheLexx> The cron daemon (called survace in Windos) must be running to work.
[04:19] <TheLexx> "ps ax | grep -i cron"
[04:20] <chris11> its running as root.
[04:21] <chris11> the script works when I run it my self.
[04:23] <TheLexx> to list things  you have queued to run under cron you can use the cammand "crontab -l"
[04:23] <chris11> just lists this:
[04:23] <chris11> PATH=/usr/bin:/home/ubuntu/python_files/process_folder_for_blocked_ratios
[04:23] <chris11> */1 * * * * br_make_run
[04:25] <Ben64> chris11: you have PATH in your crontab?
[04:26] <TheLexx> It's been I while I"ll need to look on some man pages for the memory to refiesh
[04:26] <chris11> I read that was sometimes suggested when you didn't put scripts in the normal places.
[04:28] <TheLexx> is  br_make_run a shell script?
[04:29] <chris11> its a bash script I think.
[04:29] <Ben64> chris11: you can't do that in crontab
[04:29] <chris11> really? why not?
[04:30] <Ben64> because, anyway just put the full path to the script
[04:30] <Ben64> which you should do anyway for cron stuff
[04:31] <TheLexx> The thing to remember is that environmental variables are not always the same when I process runs under cron. When I use to cron cron scripts I was sure to include the complete path to the file.
[04:32] <chris11> ok, that's good to know
 Is cron fresher in your mind? I remember there were a few tricky things. But the brain fog is stow to clear. Are you better at helping?
[04:36] <bcowan> anyone running an old macbook 2,1
 how is it going?
[04:41] <chris11> ok. not setting the path in the crontab was a good idea. I accidently reset my path variable, but I got that fixed.
[04:42] <bcowan> anyone running an old macbook 2,1
[04:46] <chris11> does it matter if cron can't write to the file?
[04:47] <TheLexx> when you type "crontab -l" does it give you an error?
[04:47] <chris11> no
[04:48] <TheLexx> do you want the script to write to a file whenever it runs?
[04:49] <chris11> no
[04:49] <chris11> I was just wondering if chmod 755 would prevent cron from running it.
[04:53] <TheLexx>  br_make_run is the script you want to run correct? Does the first line start with #/bin/bash or somthing liuke that?
[04:54] <Plex_Dave> i am going to upgrade my ubuntu server from 14.04 to 16.04.  should i be worried about breaking my icecast server when i upgrade?
 does   br_make_run is the script you want to run correct? Does the first line start with #/bin/bash or something like that?
 ok I have my test script running
[05:04] <chris11> no it does not.
[05:04] <chris11> should it?
[05:06] <chris11> alright, I just added that line.
[05:07] <TheLexx> My suggestion is that you create a new  test script that runs once per minute. That way you can see if everything is running and you have permissions. Do you want to try that? It will append to a file in your home directory.
[05:07] <chris11> I tried that * * * * * touch t.txt worked
[05:08] <shafox> My home wifi network is not visible in ubuntu but all the other devices such as phone and windows laptop can access the wifi. What would be the issue ?
 good
 check if device driver for wifi is installed
[05:11] <shafox> zerofinish, all other wifi signals it can capture but not the home one. I can see my hotspot wifi from the phone as well.
[05:11] <TheLexx> What is the location of the script you wish to run? is it /home/myname/br_make_run or somthing like that?
[05:12] <chris11> yeah, its something like that.
[05:12] <TheLexx> actualy the file does not to need a #!/bin/bash on the first live I took it off and it it is still working
[05:12] <chris11> interesting
[05:14] <TheLexx> I don't know if it needs to "chmod 755" your file, but it dosn"t hurt. I would sugest that you  use "*/1 * * * * /home/myname/br_make_run" with the real compleat path
[05:15] <chris11> I did both
[05:15] <marco_> dv
[05:16] <marco_> ryban
[05:16] <chris11> I'm a little confused about .sh Should it be at the end of my filename, and should it be at the end of the path in the crontab?
[05:16] <marco_> alnr
[05:16] <zerofinish> shafox, try restarting the network manager 'sudo systemctl restart network-manager'
[05:17] <TheLexx> To creat a test script I suggest you have a test script with two lines "date >> /home/myname/test-out.txt" and the next line "printenv >> /home/myname/test-out.txt"
[05:18] <TheLexx> when you type ls is your file "br_make_run" or "br_make_run.sh" you don"t need the sh, but it is a good way to rember that the file is a shell script.
[05:18] <chris11> ok, I'll try that.
[05:18] <TheLexx> type "ls" for list
[05:21] <TheLexx> printenv prints out all the environmental varubles. Your home directory is an environmental varuble. the comand 'cd' takes you home and ~/test-out.txt is a file in your home directory. However if the varuble HOME is not set corectorly they will not work
[05:24] <TheLexx> that is why I suggest you include the full path to wher the test script sends to. "~/test-out.txt" should work, but if $PATH is not set (in the cron job) it will not work. Mine apears to be set corectaly
[05:24] <Ben64> just always use full paths
[05:24] <danang> hello
[05:24] <danang> :D
[05:25] <TheLexx> , but if $HOME is not set (in the cron job) it will not work., it is realy best to use full paths like Ben64 said
  how is it going
[05:27] <chris11> I'm trying the test script.
[05:28] <chris11> did you mean try to see if cron could start it? or just start it myself?
[05:30] <TheLexx> after you create your test script. put it in as "* * * * *" with the compleat path and script name. It should run every minute.
[05:32] <chris11> wait, it should be date << file.txt, right?
[05:34] <TheLexx> no use >> that pushes the output to your file. Also use a compleat file path because you don"t know the curent directory when the script is running
[05:35] <chris11> ah, just a minut. I had an error in the cron job
[05:35] <TheLexx> mine seams to start the curent directory as my home, but don"t depend on it.
[05:36] <chris11> I used a complete path
[05:36] <chris11> ok, that worked.
[05:36] <chris11> HOME=/home/ubuntu
[05:36] <chris11> LOGNAME=ubuntu
[05:36] <chris11> PATH=/usr/bin:/bin
[05:36] <chris11> LANG=en_US.UTF-8
[05:36] <chris11> SHELL=/bin/sh
[05:36] <chris11> PWD=/home/ubuntu
[05:38] <TheLexx> good now you will see what it takes to get a script  working
[05:38] <shafox> zerofinish, will try that
[05:40] <chris11> ok, thanks
[05:41] <TheLexx> well I"m going to take care of my bizz
[05:41] <chris11> thanks for the help.
[05:41] <TheLexx> your welcome
[05:41] <anton02> the only distro that succesfully live boots on my system is unfortunately chinese (ubuntu kylin)
[05:42] <anton02> i've also tried systemrescueCD, opensuse, and ubuntu 16.04. only chinese ubuntu works
[05:42] <cfhowlett> weird - what is your hardware
[05:46] <anton02> 2 pascal cards
[05:46] <anton02> and a haswell cpu
[05:46] <cfhowlett> custom build, anton02 ??
[05:46] <anton02> who doesnt?
[05:48] <chris11> does there need to be a space betweeen the comment section and the first cronjob in crontab?
[05:48] <lotuspsychje> anton02: what kind of errors do you encounter whe trying to install?
[05:48] <lotuspsychje> !cron | chris11
[05:48] <anton02> doesnt mention any errors just locks up
[05:49] <lotuspsychje> anton02: lockups at wich points?
[05:49] <anton02> near the beginning of the boot process
[05:49] <lotuspsychje> anton02: did you try press F1 to see text mode at boot?
[05:50] <lotuspsychje> anton02: where specific? can you see ubuntu dots loading? grub?
[05:50] <anton02> after grub
[05:51] <lotuspsychje> anton02: what kind of graphics card do you have?
[05:52] <anton02> pascal
[05:53] <chris11> any reason a script would fail if I used absolute paths but work if I used relative paths?
[05:53] <himcesjf> Is there any PDF/book reader which gives an option to trim the margins or empty spaces for easy readibility in tablet mode?
[05:53] <lotuspsychje> anton02: sudo lshw -C video please
[05:54] <anton02> it's two SLI gtx 1070
[05:55] <lotuspsychje> anton02: think its those GTX 1070 that might refuse boot
[05:55] <anton02> ok
[05:55] <OerHeks> anton02, in sli ?
[05:56] <lotuspsychje> anton02: try few things: test other ubuntu versions 14.04 or 16.10 and !nomodeset, and F1 at boot for errors
[05:56] <lotuspsychje> !nomodeset | anton02
[05:56] <anton02> yeah, already tried nomodeset. it's the only way i got chinese ubuntu to boot
[05:56] <cfhowlett> suggestion, anton02: try lubuntu
[05:57] <cfhowlett> with nomodeset
[05:57] <anton02> next one im trying is trueOS
[05:57] <cfhowlett> OK, --- so why were you here again?
[05:57] <anton02> because im talking about ubuntu'
[05:58] <TheLexx> is there a way that I can help casper find the iso image that contains an Ubuntu system?
[06:00] <lotuspsychje> himcesjf: not sure if its what you need, but Mupdf is pretty nice & lightweight
[06:00] <TheLexx> The ISO is on the root directory of filesystem sda8. grub was able to loop mopuint it and get the kernel and initrd
[06:01] <lotuspsychje> anton02: try other kernel versions also
[06:02] <OerHeks> anton02, so ubuntu does not boot with nomodeset?
[06:02] <anton02> no
[06:02] <anton02> well, chinese ubuntu does
[06:02] <OerHeks> unbelievable ..
[06:02] <cfhowlett> a bit skeptical myself
[06:03] <cfhowlett> unless there is some way off base hardware in that custom build
[06:03] <lotuspsychje> anton02: is your system uefi or legacy booting?
[06:03] <anton02> uefi
[06:03] <lotuspsychje> anton02: have you tested installing ubuntu in legacy?
[06:03] <anton02> no
[06:03] <lotuspsychje> anton02: try all the suggested steps please and come back ok
[06:04] <anton02> ok
[06:04] <lotuspsychje> anton02: and keep in mind this is ubuntu support, we support only ubuntu
[06:06] <lotuspsychje> TheLexx: whats your end goal mate, what are you doing exactly?
[06:36] <cfhowlett> !ping
[06:37] <OerHeks> yes
[06:42] <Dreaman> !uptime
[07:14] <skcin7> Does anybody have any idea why I can't connect to my verified working VPN server from my Ubuntu 16.04.1 LTS machine?
[07:15] <lotuspsychje> skcin7: update your system to 16.04.2 first please
[07:15] <skcin7> I'm using OpenVPN to try to connect, with command "sudo openvpn --config client.ovpn", which works fine on other machines like my MacBook Pro, but is not working on my Ubuntu 16.04.1 LTS box.
[07:16] <skcin7> lotuspsychje Hmmm okay. Do you think that might help?
[07:17] <lotuspsychje> skcin7: well, lets close that out
[07:17] <lotuspsychje> skcin7: always keep your system up to date, to stay out of trouble
[07:20] <herbuntumate_> anyone in here having any problems playing youtube vid on ubuntu mate
[07:21] <lotuspsychje> herbuntumate_: did it work before?
[07:21] <herbuntumate_> ya
[07:22] <lotuspsychje> herbuntumate_: when did things start to go wrong?
[07:22] <herbuntumate_> i did some update and it quit working
[07:22] <lotuspsychje> herbuntumate_: can you recall if it was firefox 52?
[07:23] <OerHeks> "some update" .. so we need to ask what update ?
[07:23] <herbuntumate_> after i did some update yesterday i have no sound and the vid play to fast
[07:25] <herbuntumate_> i did update in the software boutique. i did a reinstall and now its ok
[07:25] <herbuntumate_> just woudering what might have gone wrong
[07:25] <tatertots> herbuntumate_: its after the fact now...the past...so no analysis can be performed
[07:26] <OerHeks> .. had to tell without the issue present. no logs ?
[07:26] <tatertots> herbuntumate_: unless you're just looking for shots in the dark also known as guessing
[07:26] <OerHeks> so a non-solvable-problem as it is fixed :-D
[07:28] <herbuntumate_> i just dont want it to happen again. its a mistory to me
[07:28] <cfhowlett> no data = no answers.
[07:29] <herbuntumate_> k. i will keep a close eye on it to see if it happens again
[07:30] <herbuntumate_> weird
[07:36] <skcin7> Ok lotuspsychje I'm on 16.04.2 LTS now.
[07:44] <skcin7> I can successfully connect to the VPN from my local machine, but when I try to from my Ubuntu box, it just hangs there.
[07:44] <skcin7> If anybody has any help or might have any ideas, it would be greatly appreciated.
[07:46] <tatertots> skcin7: what operating system is "my local machine"?
[07:47] <skcin7> MacBook OS X Sierra
[07:47] <skcin7> And I can also connect to the VPN via iOS iPhone
[07:48] <tatertots> skcin7: and is it on the same LAN with the ubuntu machine? ...that's a yes or no question there....
[07:48] <shafox> Why can't I see my home wifi network ? I am alble see every other wifi network in my system but not the home one. How do I resolve this ? I have already restarted the network-manager and networking, but still no visibility of the wifi
[07:49] <ducasse> skcin7: with the same .ovpn file, no changes?
[07:49] <skcin7> 2 different Ubuntu boxes which I own and control with completely separate IP addresses. 1 is the VPN server, 1 is the VPN client. I'm trying to route all traffic from the client to the server, so that outgoing connections from the client will say it has the server's IP address.
[07:49] <tatertots> shafox: are you able to manage your home wifi at any level /
[07:49] <skcin7> ducasse, no changes to the .ovpn file whatsoever
[07:50] <tatertots> skcin7: love how you avoid answering the yes or no questions....good luck using that strategy
[07:50] <shafox> tatertots, I can use my home network wifi in other devices such as phone, windows laptop and ubuntu laptop as well but not in one of the system which is dell vostro 2520.
[07:50] <shafox> tatertots, I tried to dns-clean but got error on restart
[07:50] <skcin7> The same "sudo openvpn --config client.ovpn" command successfully connects to the server on my OS X Sierra, but it is not connecting properly on my Ubuntu 16.04.2
[07:50] <skcin7> Tatertots, different LANs
[07:50] <OerHeks> If there are lots of wireless networks nearby, the network you are looking for might not be on the first page of the list. If this is the case, look at the bottom of the list ...  to display the rest of the wireless networks.
[07:51] <OerHeks> https://help.ubuntu.com/stable/ubuntu-help/net-wireless-find.html
[07:51] <tatertots> shafox: the reason i asked that is because if i started to talk about modes like a/b/g/n or 2.4ghz vs 5ghz and where and how to manage them would you have that deer in the head lights look on your face?
[07:51] <shafox> tatertots, I have both 2.4 and 5ghz.
[07:52] <skcin7> So I'm not sure what could be different about the Ubuntu machine to cause it to not connect to the VPN, when the .ovpn is the same.
[07:52] <ducasse> skcin7: can you add --verb 4 to the command line and see what pops up?
[07:53] <tatertots> shafox: ok...and do you know what mode you are operating in?
[07:54] <shafox> tatertots, I have 802.11abg
[07:54] <shafox> from the lshw -clkass network
[07:54] <tatertots> shafox: that's not what i was referring to but ok....
[07:55] <tatertots> shafox: you're focused on the computer itself....and that's fine and dandy.....i was talking about the "network"
[07:55] <skcin7> ducasse Options error: You must define TUN/TAP device (--dev)
[07:56] <shafox> tatertots, how would I find that ?
[07:56] <tatertots> shafox: answer this yes or no question
[07:57] <tatertots> shafox: have you ever seen the embedded web server user interface of your modem/router?
[07:57] <shafox> tatertots, no.
[07:57] <tatertots> shafox: yes or no....there's no bad or wrong answer...i just want to further understand where your head is at
[07:58] <shafox> tatertots, no
[07:58] <shafox> I have not.
[07:59] <tatertots> shafox: you can view (and possibly connect) to other wifi networks....that's enough to validate the functionality of the wlan adapter itself...only if you could configure your wireless network to be more like the ones you CAN pick up
[08:00] <shafox> tatertots, I can view and connect to other network, e.g. I can connect to the hotspot wifi through my phone.
[08:00] <shafox> tatertots, I have netgear r6220 router.
[08:01] <tatertots> shafox: try clicking either of these and report the results http://192.168.1.1  or http://192.168.0.1
[08:01] <tatertots> shafox: maybe one of those will get you to the right place
[08:03] <tatertots> shafox: did either of those get you somewhere?
[08:03] <shafox> tatertots, I can connect to my router from different system i.e. this one which is a windows. Do you want me to connect from the system where I cannot access the wifi network? If so I can enable wifi hotspot and then can report.
[08:03] <tatertots> shafox: it does not matter from where you access it ...whats important is that you access it
[08:04] <shafox> tatertots, in that case I am on the router home page.
[08:04] <tatertots> shafox: did it ask for a password?
[08:04] <shafox> tatertots, yes user and pass,
[08:05] <tatertots> shafox: ok ...sounds like you had enough information to gain access to it
[08:06] <tatertots> shafox: navigate to the area regarding wireless, if you do not understand what is there or what it does screen shots can be posted to http://imgur.com
[08:06] <shafox> tatertots, i can access that. tell me what are you looking for.
[08:07] <tatertots> shafox: what i talk about modes....i'm talking about the modes you would find in your netgear router web page.....not talking about your computer at all when i talk about "modes"
[08:07] <tatertots> shafox: can you confirm what mode you are operating in?
[08:08] <shafox> tatertots, for the 2.4ghz i see modes are enabled on ssid broadcast and 20/40mhz coexistence.
[08:08] <tatertots> shafox: is there two independent radios? one for 2.4 the other for 5 ghz? if so there is likely two ssid's to boot
[08:08] <shafox> tatertots, for the 5ghz only ssid broadcast.
[08:08] <shafox> tatertots, yes there are two.
[08:09] <shafox> tatertots, for the modes i can see upto 300mbs for 2.4ghz and upto 867mbs for the 5ghz
[08:09] <tatertots> shafox: make note of the ssid to each....are they the same ssid?
[08:09] <turista> hello every1, how can I install xfce in ubuntu?¿ (even use it)
[08:09] <turista> or gimme a tutorial to install unity 2D plz
[08:09] <shafox> tatertots, both have different ssid, one is netgear and another one is netgear-5g
[08:09] <cfhowlett> turista, sudo apt install xfce4
[08:10] <turista> (sry for my wrong english) I'm using ubuntu 16.10 x64
[08:10] <turista> it does not show
[08:10] <turista> gonna try with that number
[08:10] <skcin7> ducasse, http://paste.ubuntu.com/24163011/ <--- Not sure if you can tell there why the OpenVPN connection is failing.
[08:10] <skcin7> It seems to be getting stuck on OPTIONS IMPORT part
[08:10] <tatertots> shafox: no mention of a,b,g,n or ac anywhere?
[08:10] <shafox> tatertots, nope. nothing of that sorts.
[08:11] <shafox> tatertots, can I pm you the screenshot or shall i post it here ?
[08:11] <tatertots> shafox: you can pm me the link to the imgur.com screen shot....hexchat file transfer is far from reliable
[08:12] <shafox> tatertots, sure
[08:13] <ducasse> skcin7: seems to fail when it's about to up and configure the new tun interface, if i understand this correctly.
[08:14] <shafox> tatertots, imgur.com is not able to upload wait for a bit to upload.
[08:14] <skcin7> Do you think something might be configured wrong on the client itself? Is it an error with the .ovpn file? ducasse
[08:14] <OerHeks> !info network-manager-openvpn-gnome
[08:16] <shafox> tatertots, Thats all i get from the page.
[08:18] <tatertots> shafox: temporarily set 2.4 ghz to 54Mbps max, remove encryption and double check that no mac filtering is taking place, apply the changes, the router will reboot itself to apply the changes, check to see if it shows up then
[08:19] <ducasse> skcin7: i'm not sure, tbh, i'm not very familiar with openvpn. have you considered asking in #openvpn? show them that log and ask for help, if they tell you it's an ubuntu problem they might at least say where it is.
[08:21] <shafox> tatertots, now it shows up the 2.4ghz one.
[08:22] <gtkminh> hello
[08:22] <gtkminh> my ubuntu verry slow
[08:23] <tatertots> shafox: that means you were configured in such a way that put your network at conflict with the capabilities of the adapter
[08:23] <shafox> tatertots, ahh ok.
[08:23] <shafox> tatertots, what are my options ?
[08:24] <tatertots> shafox: you should put things back one at a time until you reveal which change results in a loss of communication, you will need to apply the changes and allow the router to reboot each time you make a change
[08:25] <shafox> tatertots, ok. First I will enable encryption. then will up the modes.
[08:25] <tatertots> shafox: put the encryption back like it was initially and see if that results in a loss of communication...that will rule that one single factor out
[08:27] <shafox> tatertots, stuck at the first. Enabled encryption and now it doesn show up.
[08:27] <tatertots> shafox: that's a good thing....you found the culprit
[08:28] <tatertots> shafox: simply use a different encryption
[08:29] <tatertots> shafox: be glad you didn't spend days or weeks focused on treating that linux computer versus the "network"
[08:30] <shafox> tatertots, currently it was wpa2-psk[aes) and i changed it to wpa-psk(tkip)+wpa2-psk(aes) and it is showing up.
[08:30] <shafox> tatertots, it has been like that for a long time
[08:30] <tatertots> shafox: i think i saw you in here with this issue yesterday.....but now you've made some real progress and identified exactly what is causing the issue....which was a incompatibility of encryption standards
[08:31] <scalwag> shafox: security is futile
[08:31] <tatertots> shafox: i think its safe to crank your speed back up from 54Mbps now
[08:31] <shafox> tatertots, yeah yersterday i sat down to fix this issue.
[08:32] <shafox> tatertots, i got an warning while ramping up from 54 to 300mbs that it may not work in the encryption level is selected. but it did restart the router.
[08:33] <scalwag> Wonder how long on average it takes the CIA to crack ubuntu password encrypting.  Maybe CIA invented the encryption under an alias with backdoors
[08:33] <tatertots> shafox: you'll know when it comes back up
[08:36] <shafox> tatertots, it does connect.
[08:36] <tatertots> shafox: good deal
[08:38] <shafox> let me restart and try to see whether it is still working just in case. tatertots thank you so much for the patience and the guidance.
[08:39] <tatertots> shafox: no problem my friend
[09:03] <magnus_> hi, I'm trying to install ubuntu 16.10, but get problems with grub. So I run boot-repair-disk from a USB-stick, but the program complains that it is not in EFI mode - anyone knows what to do?
[09:07] <scalwag> magnus_: is your computer old.
[09:08] <magnus_> a few years, yes
[09:08] <magnus_> 2-3 years I think, maybe 4
[09:09] <scalwag> magnus_: go into bios disable secure boot
[09:09] <ducasse> magnus_: what was the problem with grub in the first place?
[09:13] <magnus_> eh..... well...now, when I rebooted it, it actually worked.... hrm. I rebooted to get the grub error msg but it just booted
[09:14] <magnus_> maybe helped just to ask.....;) well, actually, I changed some bios settings and that seems to have made a difference
[09:14] <lotuspsychje> !yay | magnus_
[09:19] <Fyr> guys, what do the Ubuntu developers use to patch the kernel?
[09:19] <Fyr> what kind of hacks do they use?
[09:20] <Fyr> can I install a vanilla kernel?
[09:21] <\9> i'm not sure what exactly is done but i figure they backport fixes and stuff like that?
[09:21] <\9> if you want vanilla, use arch or something
[09:21] <Fyr> ok
[09:21] <\9> nothing stops you from compiling a kernel yourself but that goes in conflict with the package system
[09:22] <Fyr> I know
[09:22] <Fyr> I've already tried clang to compile the latest kernel.
[09:22] <Fyr> some modules it failed to compile.
[09:22] <ducasse> Fyr: also certain functionality might depend on the ubuntu patches
[09:22] <Fyr> ducasse, what functionality exactly?
[09:23] <Fyr> hibernation?
[09:23] <ducasse> Fyr: last time i tried, lxc broke for example
[09:24] <ducasse> Fyr: i really wouldn't mess with compiling the kernel without a very good reason.
[09:25] <Fyr> ok
[09:25] <Fyr> it gave me a huge performance increase on opensuse.
[09:26] <Fyr> on Intel's i7 49XX CPU.
[09:28] <ducasse> Fyr: that's not my experience at all, but feel free to experiment. just be aware that if you break it you get to keep all the pieces.
[09:29] <Fyr> (=
[09:31] <ducasse> Fyr: i might get yelled at for suggesting this, but if you want to test a patched kernel check out projects like liquorix. they have prebuilt packages for debian/ubuntu. it's still completely unsupported, of course.
[09:32] <Fyr> ok
[09:45] <shafox> tatertots, After the reboot I cannot seem to find the driver manager where it lists out the network drivers.
[09:45] <shafox> :/
[09:45] <tatertots> shafox: in terminal>   sudo apt install inxi pastebinit sosreport
[09:45] <shafox> I tried to use the live usb but it doesnt get mounted
[09:45] <tatertots> shafox: let me know when its done
[09:46] <shafox> tatertots, I dont see any wifi networks cause the network drivers are not enabled.
[09:48] <tatertots> 3:21:52 <shafox> tatertots, now it shows up the 2.4ghz one.
[09:48] <tatertots> shafox: were you hallucinating or lying?
[09:48] <shafox> tatertots, it was but when I rebooted it stopped.
[09:48] <shafox> No I wasn't lying.
[09:49] <tatertots> shafox: in terminal>   sudo apt install inxi pastebinit sosreport
[09:49] <tatertots> shafox: let me know when its done
[09:49] <shafox> tatertots, why would i go such length when someone is helping me to fix this issue.
[09:49] <shafox> ok i will try to install them using lan then
[09:52] <shafox_> tatertots, done.
[09:52] <tatertots> shafox_: in terminal>     inxi -Fxxrzc0|pastebinit
[09:52] <tatertots> shafox_: share url/link here
[09:53] <shafox_> tatertots, http://pastebin.com/s855AuyS
[09:54] <k1l> !mint
[09:55] <rymax99> gentoo
[09:55] <k1l> mint handles stuff like krenels, securityupdates and drivers differently. so ask their support to fix their stuff
[09:55] <shafox_> the base is same.
[09:55] <tatertots> shafox_: in terminal>     ubuntu-drivers list|pastebinit
[09:55] <tatertots> shafox_: share url/link here
[09:55] <k1l> shadoesnt matter. if support is important to you, then dont run a os that doesnt have the support you like.
[09:55] <shafox_> http://pastebin.com/d9zQ8vH9
[09:56] <k1l> you could ask in ##linux if you dont want to switch irc networks
[09:58] <shafox_> tatertots, http://pastebin.com/d9zQ8vH9 ^^
[09:59] <lemakbertebu> hi
[10:00] <tatertots> shafox_: in terminal>   sudo apt install bcmwl-kernel-source
[10:01] <shafox_> tatertots, bcmwl-kernel-source is already the newest version (6.30.223.271+bdcom-0ubuntu1~1.1).
[10:01] <tatertots> shafox_: in terminal>     iw dev|pastebinit
[10:01] <k1l> tatertots: shafox_ move it to ##linux please since its not a ubuntu support issue
[10:02] <lemakbertebu> hi i have proplem
[10:02] <ducasse> !ask | lemakbertebu
[10:03] <k1l> lemakbertebu: then ask and give details :)
[10:03] <lemakbertebu> i new in irc ^_^
[10:06] <ducasse> lemakbertebu: no worries, but you still haven't told us about your problem.
[10:07] <anddam> I'm not seeing the autofs keys in the mounted target, this is especially annoying in Files where it's not immediate how to access a path from keyboard
[10:07] <anddam> but it's annoying as well in CLI
[10:08] <anddam> any hint about what could be preventing autofs from creating the fs entries?
[10:14] <anddam> only once I explicitly access it as "ls /net/backup" the subdirectory is listed in fs
[10:39] <BluesKaj> Hiyas all
[10:56] <massprog> hi,is there configuration file for touchpad in etc?
[10:56] <akis> hi all. Could you please advise me if i can update "xfce4-weather-plugin" through this page https://launchpad.net/ubuntu/+source/xfce4-weather-plugin using .deb file. I am running 0.8.6 version  (under 16.04.2) and i want to update to 0.8.9 version
[10:57] <k1l> akis: as you can see, the 0.8.6-1 is for 16.04. the 0.8.9-1 is for 17.04
[10:58] <k1l> akis: i dont know the dependencies from that package and if installing manually the 17.04 package will work. most times its a bad idea to try this
[10:58] <MonkeyDust> akis  17.04 will soon be released
[10:59] <k1l> akis: you could ask in #xubuntu if that will work
[11:00] <sayres> hi guys.I have a problem that nobody could not help me !!! my problem is when i login to my ubuntu, immediately when i connect to internet by wireless my ubuntu is frizzed and even nothing is not register on syslog. how can i find out that where is my problem???plz help me ! I stuck for a month.
[11:03] <akis> kll: i saw that is for the new release 17.04 but i am wondering if it fits @16.04 too.
[11:03] <k1l> akis: as i said: most times that is a very bad idea to mix ubuntu releases
[11:03] <dn1987p> well you can try to install the deb package or compile it manually... but no guarantees
[11:06] <pitastrudl> hi, im getting "sign_and_send_pubkey: signing failed: agent refused operation" when trying to ssh into my servers
[11:06] <pitastrudl> i already posted on SO for insight http://unix.stackexchange.com/questions/350768/sign-and-send-pubkey-signing-failed-agent-refused-operation?noredirect=1#comment621093_350768
[11:06] <ducasse> akis: different releases have different versions of libraries etc, you can't expect to just mix packages like that. if you do and break something you will not get support here either.
[11:06] <sayres> hi guys.I have a problem that nobody could not help me !!! my problem is when i login to my ubuntu, immediately when i connect to internet by wireless my ubuntu is frizzed and even nothing is not register on syslog. how can i find out that where is my problem???plz help me ! I stuck for a month.
[11:08] <akis> ducasse: ok. i understand. How can i check if there will be an update for the current distro?
[11:08] <ducasse> !patience | sayres
[11:08] <dn1987p> pitastrudl, can you try http://paste.ubuntu.com/24163665/ please?
[11:09] <dn1987p> i have a similar issue, no real fix yet
[11:09] <ducasse> akis: a release usually does not get newer packages.
[11:09] <clissold345> massprog, is this any use? https://help.ubuntu.com/community/SynapticsTouchpad
[11:10] <pitastrudl> dn1987p:  rm: cannot remove '/run/user/1000/keyring/ssh': No such file or directory
[11:10] <pitastrudl> but it is there
[11:10] <pitastrudl> lol
[11:10] <pitastrudl> when i do echo $SSH_AUTH_SOCK
[11:10] <dn1987p> thats weird
[11:10] <loquox> exit
[11:10] <dn1987p> idk im having issues with gnome keyring on 2 machines, so annoying
[11:11] <pitastrudl> INDEED
[11:11] <pitastrudl> ops caps
[11:11] <dn1987p> and i havent found a fix yet
[11:11] <sayres> ubottu: i do everything and asked on askubuntu but i did not answer for my problem.
[11:11] <dn1987p> just that script that fixes it for me
[11:11] <pitastrudl> dn1987p:  did you try this https://wiki.archlinux.org/index.php/GNOME/Keyring#Disable_keyring_daemon_components
[11:12] <pitastrudl> i heard it's a valid fix for some people
[11:12] <pitastrudl> not for me unfortunately
[11:12] <Simooon> hey, just wanted to check out the daily builds, but I can not boot from the usb stick I created, I created it using unetbootin, is there some other way I'm supposed to creat the bootable USB when it is the daily builds? dd possibly?
[11:12] <ducasse> !ubuntu+1 | Simooon
[11:12] <dn1987p> pitastrudl,  im not sure i want to try, that script fix is working fine for me currently hehe
[11:13] <Simooon> ducasse, oh, thanks
[11:13] <pitastrudl> okay :)
[11:13] <k1l> Simooon: dont use unetbootin. use dd or rufus on windows
[11:13] <k1l> or the usb creator on ubuntu
[11:13] <clissold345> Simooon, I use Startup Disk Creator (if you have access to ubuntu already).
[11:14] <Simooon> ClassicBoy, I do, I will try that, thanks
[11:15] <Simooon> ClassicBoy, tagged wrong person sorry
[11:15] <dn1987p> pitastrudl,  ok I tried it, it didnt change anything actually
[11:15] <pitastrudl> rip
[11:15] <Simooon> clissold345, I will try that thanks :-)
[11:15] <pitastrudl> dn1987p: i heard the problem is that the keys were generated with the ed25519 curve
[11:15] <pitastrudl> which isnt supported by the gnome keyring
[11:15] <pitastrudl> no wait
[11:16] <dn1987p> well readding the key solves the issue for me, which seems odd then, if its not supported in general
[11:16] <pitastrudl> i meant ECDSA
[11:17] <dn1987p> have you tried a key with another format?
[11:17] <Simooon> k1l, trying that now, thanks
[11:17] <pitastrudl> i have not
[11:22] <FMan> hey
[11:23] <FMan> Sunday, Sunday...
[11:27] <dn1987p> pitastrudl,  have you tried setting SSH_AUTH_SOCK=0 in front of your ssh command?
[11:27] <sayres> I have a problem that nobody could not help me !!! my problem is when i login to my ubuntu, immediately when i connect to internet by wireless my ubuntu is frizzed and even nothing is not registered on syslog. how can i find out that where is my problem???plz help me ! I stuck for a month. plz tell me, how can i find out the problem??
[11:28] <dn1987p> sayres, can u switch to other ttys ?
[11:28] <sayres> dn1987p: if my internrt do not connected ,yes.
[11:29] <sayres> dn1987p: this is my question : https://askubuntu.com/questions/891950/ubuntu-16-4-is-freezed-at-login-after-updating
[11:30] <Guest99421> sannyschool.ru
[11:31] <sayres> dn1987p: if my internet do not connected ,yes.for example i can login by guest user because my guest user don not access to internet
[11:31] <FMan> should I consider upgrading to 17.04 when the official release occurs or stick with 16.04 LTS?
[11:32] <dn1987p> sayres, did you check for errors in kern.log or dmesg ?
[11:33] <kalby-imanie> can i execute a file under another user without being su <target_user> ?
[11:33] <kalby-imanie> i think of sticky bit
[11:33] <sayres> dn1987p: yes, when ubuntu is frizzed no error is register to any logs
[11:33] <kalby-imanie> put sticky bit in that particular file?
[11:34] <dn1987p> sayres, can you try to boot from live usb version and check if there is an issue?
[11:34] <sayres> dn1987p: immediately when i connect to internet by wireless my ubuntu is frizzed and nothing is not registered on syslog or other logs.
[11:35] <ducasse> FMan: you would need to upgrade to 16.10 first, you can't upgrade 16.04 to 17.04 directly.
[11:35] <dn1987p> well maybe then its a hardware defect?
[11:35] <dn1987p> and not a system issue
[11:35] <dn1987p> if the issue persists under any system configuration
[11:35] <sayres> dn1987p: now i am in ubuntu with 4.4.0-31 kernel , i have this problem with 4.4.0-64 and 66 linux kernel
[11:37] <FMan> right, I'll keep that in mind, but I'd do a fresh install due to Boost not working right...
[11:37] <sayres> dn1987p: in this version of kernel 4.4.0-31 i don't have any problem
[11:38] <pitastrudl> dn1987p:  yes i have, it works with that
[11:38] <pitastrudl> but only for the current session
[11:38] <dn1987p> pitastrudl,  oh alright, well at least you have a hotfix then
[11:39] <dn1987p> sayres,  maybe a driver issue, but i cant help you with this
[11:40] <sayres> dn1987p: thank you , how can i fix this?
[11:41] <dn1987p> sayres, look if your network interface manufacturer has a driver for linux and try to install it would be my guess
[11:41] <sayres> dn1987p: when I  disable network-manager.service, I can login but when I enable network-manager.service i can't
[11:41] <ducasse> FMan: if you can keep upgrading every six months and need newer software then upgrade, if you want a stable release for longer time then don't.
[11:41] <dn1987p> you said that before
[11:42] <dn1987p> you can also try doing network configuration without network manager
[11:43] <dn1987p> sayres, https://ubuntuforums.org/showthread.php?t=571188 if you want to try, take a look here
[11:44] <sayres> dn1987p: I use external wireless device .let my I plug out this and see that  is there any driver for this.
[11:46] <FMan> thanks, I guess I'll stick with the LTS presuming it will keep working
[11:58] <XATRIX> Hi, can you help me with upgrading 15.10 ?
[11:58] <XATRIX> https://paste.fedoraproject.org/paste/CS8gd3zcFiP5lBl6Wq66715M1UNdIGYhyRLivL9gydE=
[12:00] <_Trullo> which display manager is the prefered one? lightdm ok?
[12:01] <EriC^^> _Trullo: yeah it's good
[12:02] <_Trullo> ok. upgrading my server
[12:03] <EriC^^> XATRIX: do you have any ppa's installed?
[12:03] <XATRIX> EriC^^: how can i check, i think it's highly possible
[12:04] <EriC^^> XATRIX: ls /etc/apt/sources.list.d/*.list
[12:06] <XATRIX> EriC^^: https://paste.fedoraproject.org/paste/F1ko3N~uX3gZeJRJsQuRZF5M1UNdIGYhyRLivL9gydE=
[12:07] <EriC^^> XATRIX: any ppa's you can remove?
[12:07] <XATRIX> everything in this list is a ppa ?
[12:07] <XATRIX> do i have to remove every ?
[12:09] <k1l> XATRIX: you can look into the logs what exactly is causing the error
[12:09] <Fiuncho> Hi everyone!
[12:10] <k1l> XATRIX: grep Broken /var/log/dist-upgrade/apt.log
[12:10] <k1l>  | nc termbin.com 9999
[12:10] <XATRIX> k1l: where can i find upgrade logs ?
[12:10] <XATRIX> ok, let's see
[12:10] <Herbalist> hello funchio
[12:10] <k1l> XATRIX: grep Broken /var/log/dist-upgrade/apt.log |nc termbin.com 9999
[12:10] <Herbalist> zero ops ?
[12:10] <mustmodify> how does tab completion work?
[12:10] <Herbalist> what's that ?
[12:10] <k1l> mustmodify: write "must" then oress "tab" and see
[12:10] <XATRIX> no such file, apt.log in dist-upgrade
[12:11] <mustmodify> It seems like some programs tab complete filenames, and others tab-complete other things.
[12:11] <mustmodify> k1l: what?
[12:11] <k1l> XATRIX: "cat /var/log/dist-upgrade/main.log | nc termbin.com 9999"
[12:11] <Herbalist> i think each application has their own way
[12:11] <Herbalist> if any
[12:11] <k1l> mustmodify: ah, you talk about terminal.
[12:11] <mustmodify> Sorry,
[12:11] <Fiuncho> i am looking for help, i have posted a problem in the ubuntu forums, the link to the post: https://ubuntuforums.org/showthread.php?t=2355373 if anyone can help me, please, private. Thanks and sorry :*
[12:11] <mustmodify> I can see now how that's confusing.
[12:11] <XATRIX> k1l: http://termbin.com/wkiq
[12:11] <Herbalist> hehe:)
[12:11] <mustmodify> Yes, I guess I should go to #bash. :)
[12:12] <mustmodify> sorry
[12:12] <Herbalist> np
[12:14] <XATRIX> sounds if i have no errors in
[12:14] <XATRIX> but which repo, cause the troubles
[12:24] <sayres> dn1987p: by folowing this site https://ubuntuforums.org/showthread.php?t=2203162&p=12917230#post12917230 i install this driver but after run this command "lshw -C network" the output is "configuration: broadcast=yes driver=rtl8192cu driverversion=4.4.0-31-generic" ?
[12:25] <sayres> dn1987p: is it true?
[12:26] <k1l> XATRIX: "mount | nc termbin.com 9999"
[12:26] <freedomfox> hello
[12:28] <tozen> freedomfox: what the matter?
[12:29] <freedomfox> I am trying to setup a wireless wpa2 enterprise connection, so i can proceed with ubuntu server installation
[12:30] <freedomfox> however there are no options for wpa2 enterprise
[12:32] <freedomfox> tozen: i am lost :/
[12:33] <XATRIX> k1l: http://termbin.com/xngk
[12:33] <aLeSD> -quick
[12:33] <sayres> dn1987p: buddy in this sait https://ubuntuforums.org/showthread.php?t=571188 that you introduce to me , my Security is WPA&WPA2 Personal . which one i have to folowed?
[12:33] <XATRIX> i think i can clean the logs, and try to upgrade again
[12:38] <freedomfox> Anyone that can help with wpa2 enterprise during installation?
[12:41] <k1l> XATRIX: sudo umount /var/cache/apt/archives
[12:42] <k1l> XATRIX: then run "sudo do-release-upgrade" again
[12:51] <vlyalcin> Hi, I have a problem and want to share my screen photo. Which image host should I use?
[12:52] <MonkeyDust> vlyalcin  imgur.com
[12:52] <XATRIX> k1l: i'm doing do-release-upgrade with -s flag
[12:53] <XATRIX> for the sandboxing
[12:53] <vlyalcin> MonkeyDust, thanks
[12:55] <instigator> Hello. I am trying to apt-get install the following: libjpeg-dev but its not available in ubuntu, can only see libjpeg8
[12:56] <XATRIX> k1l: http://termbin.com/9pfj
[12:57] <ioria> !info libjpeg-dev
[12:57] <XATRIX> !info mc
[12:57] <vlyalcin> When I close the laptop cover (suspend the computer), menu texts disappearing. Screenshot http://imgur.com/CENIm9t. I use Ubuntu 16.04, Mate desktop environment
[12:58] <MonkeyDust> !find libjpeg
[12:58] <ioria> instigator, is in universe
[12:58] <vlyalcin> Does anyone have an idea about how I can solve?
[12:58] <ioria> instigator, ops, sy
[12:59] <ioria> instigator,  apt-cache policy libjpeg-dev
[13:01] <latino30> does ubuntu have this package libgcc_s.so.1
[13:01] <latino30> im using yakkety yak and I did not see it in synaptic manager
[13:02] <instigator> ioria: here is the output of the apt-cache policy libjpeg-dev: http://pastebin.com/dsqFUAE8
[13:02] <ioria> instigator,  what ubuntu are you using ?
[13:02] <instigator> ioria: 14.04
[13:03] <ioria> !info libjpeg-dev trusty
[13:03] <ioria> instigator,  did you change you sources.list ?
[13:04] <instigator> ioria: no i didnt change it. is there an entry which needs to be added for libjpeg-dev?
[13:04] <ioria> instigator,  nope, it's in main
[13:04] <k1l> XATRIX: so the upgrade worked now?
[13:04] <ioria> instigator,  sudo apt-get update in a pastebinit, please
[13:05] <k1l> XATRIX: first, remove fglrx. since that doesnt work anymore
[13:06] <k1l> XATRIX: did you manually set packages to hold? Hold prevents MarkInstall of kde-config-touchpad [ amd64 ] < 0.8.1-2 -> 4:5.5.5-0ubuntu1 > ( universe/kde )
[13:09] <instigator> ioria: pastebin of sudo apt-get update: http://pastebin.com/Z15MS3aN
[13:09] <XATRIX> k1l: it's not, the same trobules, but now i can filter Broken from the apt.log
[13:09] <XATRIX> I din't hold the packeges
[13:10] <Peanut> Hi folks - I have a sick PC, fairly new (july 2015) i-6700k. My GFX-card died (nv960) and I  had to fall back on the CPUGPU. Which is very glitchy, and I'm trying to find out if it's a kernel/driver issue  or whether my CPU is dying.
[13:10] <k1l> instigator: sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 16126D3A3E5C1192
[13:10] <ioria> instigator,  maybe change you repository to Main
[13:11] <Peanut> I get a lot of 'GPU HANG' messages on my system, where the screen freezes for 10 seconds, then most often recovers. It runs Ubuntu 16.10. I've tried the 4.10 kernel from the PPA but that makes it slightly worse.
[13:11] <Peanut> All nvidia drivers/packages have been removed from the system.
[13:11] <ioria> instigator,  ^ k1l
[13:13] <Peanut> How well should Ubuntu 16.10 work on i6700k with the built-in GPU? Does anyone have experience with that?
[13:14] <Kenix73> peanut: laptop? custom built desktop? bought? model of the on-board gpu?
[13:14] <k1l> Peanut: it should work, i guess. what do the logs like syslog and Xorg.0.log say?
[13:14] <Peanut> Kenix73: custom built desktop, the on-board GPU is the one in the i6700k, no other GPU on board anymore.
[13:15] <Peanut> k1l: I'm a bit hampered (using textmode at the moment) It's mostly 'GPU HANG in render ring'
[13:16] <Kenix73> cat /var/log/Xorg.0.log
[13:17] <k1l> you can pipe to "| nc termbin.com 9999" if you have internet on that machine, so you can show the log here
[13:18] <Peanut> Kenix73: Just looked. There is nothing interesting in Xorg.0.log, only standard startup stuff, no errors. The errors do show up in syslog.
[13:18] <Peanut> k1l: Awesome, let me try that, I do have network.
[13:19] <k1l> Peanut: cat /evar/log/syslog | nc termbin.com 9999
[13:21] <Peanut> k1l: http://termbin.com/5hvq and http://termbin.com/r01f
[13:24] <k1l> Peanut: "sudo apt update && sudo apt install xserver-xorg-video-intel"
[13:25] <Peanut> k1l: It reports: already installed and the latest version.
[13:27] <k1l> Peanut: hmm, i dont know then. maybe read here https://wiki.ubuntu.com/X/Troubleshooting/Freeze and file a bug
[13:28] <anshul> fuck
[13:28] <anshul> fuck
[13:28] <anshul> fuck
[13:28] <anshul> fuck
[13:28] <Peanut> k1l: Not sure it's a bug, or a dead CPU/GPU :-(
[13:29] <sayres> I want connect to internet manualy for this first i have disabled network manager by "sudo systemctl enable network-manager.service " and in "sudo nano /etc/wpa_supplicant.conf" I add https://paste.ubuntu.com/24164287/ and finally i run "sudo wpa_supplicant -iwlx00304f8b1f0f -c/etc/wpa_supplicant.conf -Dwext" but I can not connect to internet and i got this messages: https://paste.ubuntu.com/24164290/  where is my mistake?
[13:30] <ioria> sayres, try sudo wpa_supplicant -iwlx00304f8b1f0f -c  /etc/wpa_supplicant.conf -Dwext    (a space between -c and /etc)
[13:36] <sayres_> ioria: is it true? sudo systemctl disable network-manager.service . or i have to stop this?
[13:37] <ioria> sayres, stop it, but if you keep using interfaces better to diable it
[13:37] <cyber_freakr> hi
[13:38] <sayres> ioria: is it true? sudo systemctl disable network-manager.service . or i have to stop this?
[13:38] <ioria> sayres, stop it, but if you keep using interfaces better to disable it
[13:38] <instigator> k1l: thanks
[13:38] <instigator> ioria: my repository already includes Main
[13:39] <ioria> instigator, i mean using the Main repos (archive, not za)
[13:39] <ioria> instigator, but it's ok
[13:40] <sayres> ioria: when I disable it I also connected to internet? is normall?
[13:40] <instigator> ioria: installing libjpeg-dev working just fine after the GPG error was resolved. thanks for the assistance
[13:40] <ioria> instigator, ok
[13:41] <ioria> sayres, ps -A | grep NetworkManager
[13:41] <sayres> ioria: 5716 ?        00:00:01 NetworkManager
[13:41] <ioria> sayres,  still running
[13:42] <ioria> sayres,  do you want to stop it
[13:42] <sayres> ioria: yes ,i want connect to internet manually
[13:42] <ioria> sayres,  sudo systemctl stop network-manager
[13:43] <sayres> ioria: after run this command i run sudo wpa_supplicant -iwlx00304f8b1f0f -c /etc/wpa_supplicant.conf -Dwext .is it true?
[13:44] <ioria> sayres,  assuming your interface is already configured and the wpa_supplicant.conf is correct, yes
[13:45] <sayres> ioria: ok ,i am doing
[13:45] <Dedrickert> my box 16.10 experiences intermittent systemd failure after several hours of uptime. shutdown -h now, poweroff, init 0 all fail to work. I then need to the magic sysrq keys to shutdown.
[13:46] <Dedrickert> any ideas what might be the issue?
[13:52] <BluesKaj> Dedrickert, think there's a power off session timer setting bug in 16,10 ...i had the same experience on Kubuntu 16.10 , but I've now moved on to testing 17.04 Zesty and the  bug seems to be gone. Don't recommend upgrading to 17.04 however ...anything in /var/log/syslog?
[13:54] <viju> Are they going to remove unity in the next lts version?
[13:55] <himcesjf> Is there any PDF/book reader which gives an option to trim the margins/empty spaces for easy readibility? This I am asking for reading on laptops which can work as 2-in-1 convertible
[13:55] <sayres> ioria: dude I can connect to internet but my big problem have still remained. https://ubuntuforums.org/showthread.php?t=2355383&p=13619313#post13619313
[13:57] <ioria> sayres,  you mean that it freezes at login ?
[13:57] <sayres> ioria: without network manager still my ubuntu is frizzed
[13:57] <ioria> sayres,  again ps -A | grep NetworkManager
[13:57] <sayres> ioria: no when I connect to internet
[13:58] <XATRIX> https://paste.fedoraproject.org/paste/BTBED8RseaXsCZndampExl5M1UNdIGYhyRLivL9gydE=
[13:58] <XATRIX> what's wrong with it ?
[13:58] <ioria> sayres,  still running ?
[13:59] <k1l> viju: why should they?
[13:59] <sayres> ioria: I think network maneger was cloesed ,let me i test again
[13:59] <XATRIX> why i can't remove these packages, which don't allow me to upgrade release
[13:59] <sayres> ioria: i have to restart my computer again
[13:59] <ioria> sayres,  if you restart Nm will start again
[14:00] <k1l> XATRIX: remove fglrx
[14:00] <XATRIX> fglrx*
[14:00] <XATRIX> The following packages will be REMOVED:
[14:00] <XATRIX>   fglrx fglrx-amdcccle fglrx-core fglrx-dev fglrx-pxpress
[14:01] <k1l> XATRIX: yes
[14:01] <XATRIX> doing
[14:01] <XATRIX> done
[14:02] <k1l> XATRIX: then try again
[14:03] <k1l> XATRIX: and there is a lot of trouble around libqca2. but i dont know what that is
[14:04] <XATRIX> Still have tons of Broken packages
[14:04] <XATRIX> and upgrade process stops with error
[14:05] <sayres> ioria: Network Manager closes .immediately when i run "sudo dhclient wlx00304f8b1f0f" ubuntu is frizzed
[14:05] <sayres> ioria: Network Manager closed .immediately when i run "sudo dhclient wlx00304f8b1f0f" ubuntu is frizzed
[14:06] <ioria> sayres,  using an usb adapter ?
[14:07] <sayres> ioria: yes
[14:07] <k1l> XATRIX: i suggest you use ppa-purge to get rid of your ppa packages, too
[14:08] <sayres> ioria: i dont have any problem in 4.4.0 -31 kernel but in 4.4.0-64 and 66 i have problem
[14:08] <XATRIX> yes, i installed it, but how to pass it needed packees
[14:08] <XATRIX> ?
[14:08] <ioria> sayres,  maybe a module problem then
[14:09] <k1l> !ppa-purge | XATRIX
[14:12] <sayres_> ioria: sorry my connection was failed
[14:13] <george> apollo2017
[14:14] <george> ?
[14:14] <sayres_> ioria:  what do you think ?
[14:14] <george> #ebooks
[14:15] <ioria> sayres_, if it works on older kernel, maybe it'a a problem with the new rtl8192cu module, idk really... sure you anything from the logs ?
[14:17] <scalwag> CIA has cracked ubuntu
[14:18] <sayres_> ioria: yes ,there is not register on syslog or other.look im trying in this way. first i login to new kernel and open syslog. i remember the time and immediatlly connect to internet. my ubuntu is friezzed and after restart my pc I looking for time that i connect to internet but this time is not registered
[14:22] <sayres_>  ioria: do you have any suggestion?
[14:22] <sayres_>  ioria:I stock for a month
[14:22] <sayres_>  ioria:I stuck for a month.
[14:23] <sayres_> ioria: how can I exclusive kernel for updating? that means I dont want to updateed kernel?
[14:23] <kalby-imanie> how can i change back into normal permission(without sticky bit) after i created sticky bit on my dir before?
[14:24] <kalby-imanie> i did chmod 0770 did not work out
[14:25] <kalby-imanie> i put 2770 <dir_name> before, so that it could ba granted group permissions for other users within the group member
[14:25] <scalwag> kalby-imanie: use just 3 numbers not 4
[14:26] <kalby-imanie> scalwag: did not work like it used to be, what i mean is that, something has been changed even i tried to make it back. because the user which are not in the same group, could not even get into the directory?
[14:26] <kalby-imanie> that is weird
[14:27] <scalwag> kalby-imanie: run file manager as sudo. Change permission from within file manager
[14:27] <kalby-imanie> i did changed the permission by 'sudo chmod'
[14:28] <kalby-imanie> put it 3 numbers
[14:28] <kalby-imanie> but outsider still cant get it
[14:28] <kalby-imanie> in*(
[14:28] <sayres_> how can I exclusive kernel for updating? that means I dont want to updateed kernel?
[14:28] <kalby-imanie> unless i never cnaged the permission then everybody could get in
[14:29] <kalby-imanie> put sticky bit messing up the rest of the users which are not in the same group.
[14:29] <kalby-imanie> i did the ls -l, i got no indications of s,S,T
[14:29] <kalby-imanie> everything was removed before but still
[14:30] <pac1> #freecad
[14:30] <FunkyELF> I have a 4TB external drive.  What should I format it to if i want to be able to use it between Linux and Windows?
[14:32] <sayres_> how to prevent ubuntu from updating kernel?
[14:33] <Guest96690> Who helps me, I try to create a usb of xubuntu 16.04.2 but I do not get it to start, but with xubuntu 14 there is no problem
[14:34] <RonWhoCares> lsv: Are you here
[14:35] <k1l> FunkyELF: ntfs
[14:35] <RonWhoCares> Hi k1l
[14:35] <noobuntu> http://askubuntu.com/questions/18654/how-to-prevent-updating-of-a-specific-package
[14:35] <k1l> Guest96690: dont use unetbootin. use rufus on windows
[14:36] <Guest96690> no windows
[14:36] <noobuntu> use dd
[14:36] <k1l> Guest96690: then use dd or the ubuntu usb creator
[14:37] <ioria> sayres_, you need kernel updates.... maybe the issue is elsewhere
[14:38] <k1l> sayres_: did you remove your tor stuff like i told you yesterday?
[14:38] <RonWhoCares> k1l: This morning my computer randomly rebooted.  Then it just froze (about 45 minutes after randomly rebooting). I had "watch -n 5 free-m" running in a terminal window when it just froze. The date - time wasn't updating. I think the swap partition was being accessed during the freeze.  Is there anything I should be doing to try and prevent this?
[14:38] <sayres_> ioria: I'm tired .
[14:39] <RonWhoCares> k1l I should add that the swap partition hasn't been an issue since I was here last
[14:39] <sayres_> k1l: i install ubuntu again but still  there is my problem.
[14:39] <ioria> sayres_,  fresh install ?
[14:40] <ioria> sayres_,  so paste dmesg
[14:41] <sayres_> ioria : not very fresh ,I use all packages that previously installed ubuntu.local repo
[14:41] <ioria> sayres_,  k1l asked you about tor ....
[14:41] <lerner> is there a command to turn an embedded webcam off?
[14:41] <lerner> and an embedded microphone
[14:41] <bob101> hi, i have a wordlist called 3-words.txt that hold only 3 letter english words. I want to create a new file that has every combination of each 3 letter word seperated with a '-' dash
[14:41] <bob101> symbol
[14:43] <sayres_> ioria: https://paste.ubuntu.com/24164700/
[14:43] <k1l> RonWhoCares: syslogs will tell what was going on
[14:44] <sayres_> ioria: I remove tor completely
[14:44] <RonWhoCares> I manually shut the computer off while it was frozen ... after about 2 minutes
[14:44] <k1l> sayres_: so the fresh install worked? without anything added by you?
[14:44] <RonWhoCares> Where are syslogs location
[14:44] <k1l> RonWhoCares: /var/log/
[14:45] <ioria> sayres_,  using IPv6 ?
[14:45] <sayres_> k1l: no not work ,my problem still remained
[14:46] <sayres_> ioria : no but i have not disabled it
[14:46] <k1l> sayres_: i still dont know if that is a driver or hardware issue since you cant say or run a clean ubuntu
[14:46] <ioria> sayres_,   IPv6: ADDRCONF(NETDEV_CHANGE): wlx00304f8b1f0f: link becomes ready
[14:47] <ioria> sayres_,   but it shouldn't be an issue
[14:47] <XATRIX> k1l: http://termbin.com/5lqt still the same
[14:48] <XATRIX> i clean all of ppa
[14:48] <sayres_> k1l: I dont think it is because of hardware issue .because in 4.4.0-31 version of kernel ,work perfectly
[14:49] <sayres_> ioria: yes ,I don't think an ipV6 cause the problem
[14:49] <k1l> sayres_: is there a chance to run a ubuntu without all your packages and changes?
[14:49] <XATRIX> k1l: http://termbin.com/seqq
[14:49] <ioria> sayres_,   yes, try from LiveCD
[14:50] <sayres_> k1l: in live ubuntu work without problem
[14:50] <RonWhoCares> k1l: Does it hurt Ubuntu to be "frozen"
[14:50] <sayres_> ioria: in live ubuntu work without problem
[14:50] <ioria> sayres_,   because it's the old kernel ....
[14:50] <sayres_> ioria: yes ,exactly
[14:50] <k1l> RonWhoCares: its not the standard when it freezes
[14:51] <ioria> sayres_,  modinfo rtl8192cu   please
[14:52] <sayres_> ioria:   https://paste.ubuntu.com/24164740/
[14:53] <ioria> sayres_,  you are on 4.4.0.31 right now ...
[14:53] <sayres_> ioria : yes, i need internet and in this kernel i have it
[14:54] <sayres_> ioria: do you want modinfo rtl8192cu to other kernel?
[14:54] <ioria> sayres_,  well, we need the dmesg from your 66 kernel, yes
[14:55] <sayres_> ioria: ok . i need restart my pu.i will come back soon
[15:01] <_Trullo> ok after update to latest ubuntu it aborted or something, too many errors.. now I get a black screen with a bunch of letters.. ending with kernel panic, not syncing VFS, unable to mount root fs..
[15:03] <sayres> ioria : https://paste.ubuntu.com/24164797/
[15:04] <noobuntu> how did you update
[15:04] <sayres> ioria:  https://paste.ubuntu.com/24164806/
[15:04] <_Trullo> I got a question when I logged in
[15:05] <sayres> ioria: this is info from 66 kernel
[15:07] <sayres> ioria: i think before connect to internet everything is ok
[15:08] <k1l> sayres: what video card is it?
[15:08] <ioria> sayres_,  i see
[15:08] <sayres> k1l: now ,default but befor nvidia
[15:08] <k1l> sayres: did you install the ubuntu nvidia driver from the repo?
[15:09] <k1l> i saw some crazy motherbords which didnt work properly without the prop driver from nvidia
[15:09] <sayres> k1l: yes , but now I have not installed yest
[15:10] <ioria> sayres_,  it freezes when you run the dhclient command or when exactly ?
[15:10] <sayres>  k1l: https://paste.ubuntu.com/24164844/
[15:10] <dn1987p> sayres, ioria https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1666421 did you see this one already?
[15:11] <ioria> dn1987p, he's using 66... but thanks looking ...
[15:11] <dn1987p> oh alright i somehow thought it was 63
[15:11] <dn1987p> which would be odd though
[15:12] <ioria> dn1987p, same the issue still there in 66
[15:12] <sayres> dn1987p : no but i have problem with 64 and 66
[15:12] <ioria> sayres_,  it freezes when you run the dhclient command or when exactly ?
[15:13] <PCatinean> What is the easiest way to setup a printer? Any explanation why it's not as easy as in windows?
[15:14] <dn1987p> ioria, [High,Fix committed] does that mean the fix is already available through official sources
[15:14] <ioria> dn1987p, committed not released
[15:14] <k1l> PCatinean: yes, easy explanation: because the manufacturer dont ship the same quality drivers and software as for windows.
[15:15] <PCatinean> k1l, and windows holds like a central repository copied from linux-style repositories and automatically install on windows startup?
[15:15] <ioria> sayres,  when does it freeze exactly ?
[15:16] <k1l> PCatinean: i dont understand what you mean
[15:16] <XATRIX> k1l: the last one log file
[15:16] <sayres> ioria: exactly ubuntu is connected to internet . you think when ubuntu fist ping from internet
[15:16] <XATRIX> k1l: http://termbin.com/obwv
[15:16] <XATRIX> how can i resolve em?
[15:16] <PCatinean> When you start windows and plug in a printer it automatically installs the drivers and it works out of the box. I just assume printer manufacturers make the driers and microsoft published them in a central repository
[15:16] <PCatinean> That enables this automatic find&install procedure
[15:16] <sayres> ioria: exactly ubuntu is connected to internet . you think when ubuntu give first ping from internet
[15:17] <ioria> sayres,  so when you run the dhclient command ?
[15:17] <k1l> PCatinean: yes, the manufacturers work together with microsoft for that.
[15:18] <sayres> ioria: exactly
[15:18] <ioria> sayres,  why don't we try witout dhcp?  and set it static ?
[15:19] <sayres> ioria: how can i do exactly?
[15:20] <ioria> sayres,  sudo service network-manager stop
[15:20] <k1l> XATRIX: "apt-mark showhold | nc termbin.com 9999"
[15:20] <sayres> ioria : ok ,so!!
[15:20] <XATRIX> k1l: kde-config-touchpad
[15:20] <XATRIX> only this one is in list
[15:21] <kalby-imanie> does sticky bit only provids deletion security feature?
[15:21] <ioria> sayres,  sudo iconfig wlx00304f8b1f0f down
[15:21] <k1l> XATRIX: sudo apt-mark unhold kde-config-touchpad
[15:21] <kalby-imanie> only the owner can do deletion and others can only create files or read
[15:21] <singh1114> hello there!
[15:21] <XATRIX> k1l: Canceled hold on kde-config-touchpad.
[15:21] <ioria> sayres,  sorry, sudo ifconfig wlx00304f8b1f0f down
[15:22] <XATRIX> what's now ?
[15:22] <sayres> ioria : no problen dude
[15:22] <sayres> ioria: whats next?
[15:22] <k1l> XATRIX: sudo do-release-upgrade
[15:22] <ioria> sayres,  sudo ifconfig wlx00304f8b1f0f up
[15:23] <XATRIX> k1l: is it ok, if i run it in a sandbox ? using 'do-release-upgrade -s' ?
[15:23] <singh1114> I have a question. Do the submissions of gsoc proposals can be edited once made in the Gsoc app?
[15:23] <k1l> XATRIX: why only simulate it?
[15:23] <sayres> ioria: where place i have set static ip?
[15:23] <sayres> ioria: where place i have to set static ip?
[15:23] <XATRIX> i'd like to see the whole process, and if it's all good, the next run will be without -s
[15:24] <ioria> sayres,  sudo ifconfig wlx00304f8b1f0f    myip
[15:24] <sayres> ioria : where is GW and DNS?
[15:24] <ioria> sayres,  wait, dude
[15:25] <sayres> ioria: ;-)  ok
[15:25] <ioria> sayres,  sudo ifconfig wlx00304f8b1f0f   netmask 255.255.255.0
[15:26] <sayres> ioria: finished?
[15:26] <ioria> sayres, sudo route add default gw    myrouter_ip   wlx00304f8b1f0f
[15:28] <sayres> ioria :buddy can you write by order in https://paste.ubuntu.com/??
[15:28] <ioria> sayres, what's the problem ?
[15:28] <ioria> sayres, did you add the gw ?
[15:28] <sayres> ioria: i am confused?
[15:29] <ioria> sayres, just run the commands
[15:29] <ioria> sayres,  where you stopped ?
[15:30] <sayres> ioria :https://paste.ubuntu.com/24164924/
[15:30] <sayres> ioria: is it true?
[15:30] <ioria> sayres,  nope
[15:31] <sayres> ioria : where is my mistake?
[15:31] <ioria> sayres,  where i wrote myip and myrouter_ip   you have to put YOUR ip and YOU router ip
[15:32] <ioria> sayres,  what is your router ip ?
[15:32] <sayres> ioria: how can i find out what is my gw? by command
[15:33] <ioria> sayres,  route
[15:33] <sayres> ioria:    this is my Ip addr:192.168.43.137  Bcast:192.168.43.255  Mask:255.255.255.0
[15:34] <sayres> ioria: I use mobile hotspot
[15:35] <ioria> sayres,  ok, your ip is 192.168.43.137  and your router ? should be 192.168.43.X
[15:35] <ioria> sayres,  route
[15:35] <sayres> ioria: i dont have modem .I use mobile hotspot and where is ioria or how can i find out?
[15:35] <ioria> sayres,  oh, i see
[15:38] <anddam> how do I make dash aware of a custom .desktop file?
[15:39] <ioria> anddam, you put it in ls ~/.local/share/applications/
[15:39] <aaio> anyone know why swiping right to go back in chromium doesn't work under ubuntu?
[15:40] <aaio> (on a touchscreen)
[15:40] <anddam> ioria: and what's the common practice to have it on ~/Desktop as well, a link?
[15:40] <aaio> the swipe animation starts but its like its interrupted by something immediately
[15:40] <sayres> ioria: do you have suggestion for finding my router ip?
[15:40] <ioria> anddam, you can create a .desktop on desktop, but Dash it's not aware of it
[15:41] <ioria> sayres,  what you got if you run 'route'
[15:41] <anddam> ioria: yes, I understand I have to put it in ~/.local/… , my question is what's appropriate to have it recognized by Dash AND on Desktop
[15:41] <anddam> I just used an hardlink
[15:41] <anddam> thanks
[15:41] <Eric> good morning
[15:42] <ioria> anddam, i don't think there are problems
[15:42] <sayres> ioria:  https://paste.ubuntu.com/24164990/
[15:42] <Eric> i need help with install ubuntu
[15:42] <alkisg> What help?
[15:42] <ioria> sayres,  your route is 192.168.43.1
[15:43] <ducasse> !install | Eric
[15:43] <k1l> Eric: help with what ecxactly? please be a lot more specfic than you were yesterday
[15:43] <Eric> i has usn flash on me
[15:44] <k1l> Eric: what is your native language?
[15:44] <sayres> ioria: ok im trying .i have to dissconnected for test.i will come back soon dude.
[15:44] <ioria> sayres,  http://paste.ubuntu.com/24164999/
[15:45] <sayres> ioria: thnk you .i try this now
[15:45] <ioria> sayres,  ok
[15:45] <Eric> just english
[15:46] <k1l> Eric: then please use proper english and give more details. it is very hard to understand what your setup is and what your issue is. so its nearly impossible to help you.
[15:46] <Eric> kl i has ubuntu iso on my usb flash already
[15:47] <k1l> Eric: ok, what is the issue now?
[15:47] <Eric> i need dual windows 10 andd ubuntu on one laptop
[15:47] <k1l> Eric: the ubuntu install has a option to install ubuntu alongside windows
[15:47] <ducasse> !dualboot | Eric
[15:51] <Eric> new update is Ubuntu 16.10
[15:52] <k1l> Eric: where is your issue?
[15:52] <Eric> Ubuntu 16.04.2 LTS
[15:52] <Eric> which one i click?
[15:52] <k1l> that is not an issue
[15:53] <k1l> Eric: for beginners better use 16.04.2
[15:53] <Eric> kl i dod resize partition
[15:53] <Eric> did
[15:55] <Eric> kl i did turned fastboot off and secureboot to disabled
[15:58] <k1l> Eric: i still dont know what your issue is
[16:01] <Eric> kl i said i did turned fastbooter off
[16:02] <Eric> i did disbled secureboot
[16:02] <sayres> ioria: in 31 I have internet but in 66 i do not have internet. i got "From 192.168.43.138 icmp_seq=82 Destination Host Unreachable"
[16:02] <k1l> Eric: and now what?
[16:02] <Eric> i did resize partition already
[16:03] <k1l> Eric: i loose the motivation to ask questions for more details and then have to wait 10minutes for you just saying something total different and unrelated. you still could not describe what the problem is. what doesnt work? what error do you get? what do you want to know?
[16:03] <wx> if i setup a zfs mirror pool, can i add disks to it later
[16:03] <wx> or do i have to destroy it and rebuild it
[16:03] <k1l> wx: no
[16:04] <Eric> how
[16:04] <wx> k1l: i'm using zfs for storage only. is there any type of zfs pool that allows me to keep adding disks without destroying the pool
[16:04] <k1l> wx: you can only exchange disks or once again mirror it.
[16:04] <noobuntu> which package provides the free command as in free -h
[16:04] <Eric> kl i has my other account in here
[16:04] <Eric_____> Hi
[16:05] <MonkeyDust> noobuntu  type    which free
[16:05] <k1l> noobuntu: procps
[16:06] <k1l> Eric_____: Eric i give up. you still have not explained what your problem is.
[16:07] <CarolinaRube> I'm using ubuntu 16.04 and recently my usb mouse has started misbehaving after boot.  I have to click in order to activate it and the effect is only temporary.
[16:07] <CarolinaRube> If I replug it, everything works like normal.
[16:07] <Eric_____> I see screen saying try ubuntu without installing
[16:07] <CarolinaRube> Is there a setting that my have gotten modified somewhere?
[16:09] <Eric_____> I see dots loading on ubuntu
[16:09] <k1l> wx: https://pthree.org/2012/12/04/zfs-administration-part-i-vdevs/
[16:09] <MonkeyDust> Eric_____  hit F12
[16:10] <Eric_____> I did pressed f12
[16:12] <MonkeyDust> Eric_____  no text screen?
[16:13] <Eric_____> I see text screen
[16:13] <MonkeyDust> Eric_____  ok, do you read anything disturbing? where does it halt?
[16:15] <Eric_____> How?
[16:15] <ducasse> Eric_____: did you read the links from ubottu on how to install? is there anything there you don't understand?
[16:15] <ioria> sayres,  sy, what you got from  192.168.43.138 ?
[16:16] <EuSiTu> hello. dose HexChat have a dependency requirement named GTK 2 or 3?
[16:16] <MonkeyDust> Eric_____  what do you mean, 'how'? do you see text now, after you pressed F12 ?
[16:18] <baizon> EuSiTu: http://packages.ubuntu.com/zesty/hexchat
[16:18] <Eric_____> Pwconv: failed to change mode of /etc/passwd- to 0600
[16:22] <Eric_____> Pwconv: failed to change the mode of /etc/passwd- to 0600
[16:22] <ducasse> Eric_____: can you please tell us what your actual problem is? people have been asking you for half an hour now without an answer.
[16:27] <Arone> hi ?
[16:27] <Arone> any one know If backup-manager supports a port other than the 21 for export ftp
[16:28] <Chatscript-5765> Hia
[16:30] <sayres> ioria: are you here?
[16:30] <ioria> sayres,  tep
[16:31] <ioria> sayres,  where it stops ?
[16:31] <sayres> ioria :  after sudo wpa_supplicant -B -iwlx00304f8b1f0f -c /etc/wpa_supplicant.conf -Dwext ,ubuntu is frizzed again
[16:32] <ioria> sayres,  ok, can you kill with ctrl+c and paste dmesg  and syslog ?
[16:32] <sayres> ioria: static Ip does not work like the other again
[16:32] <ioria> sayres,  meaning ?
[16:34] <OnceMe> why does ssh-keyscan doesnt output anything?
[16:35] <Eric> Im back
[16:35] <akik> OnceMe: it's normal for applications not to output anything if the operation succeeded
[16:35] <Eric> Its said error invaild to access fat
[16:36] <sayres_> ioria: ubuntu is frizzed and anything does not work and i have to restart my pc
[16:37] <sayres_> ioria: sorry my connection field again
[16:37] <ioria> sayres_,  it's possible that the module is broken in kernel above 62....
[16:37] <bob101_> anyone know if you can specify a specific wordlist file with crunch?  i have a list of english words that i want to create a wordlist for with '-' as a seperator
[16:37] <ioria> sayres_,  can you paste lsusb ?
[16:38] <sayres_> ioria: which kernel?
[16:38] <ioria> sayres_,  doesn't matter
[16:39] <sayres_> ioria:  https://paste.ubuntu.com/24165256/
[16:40] <sayres_> ioria: https://paste.ubuntu.com/24165250/  between this time ,ubuntu frizzed
[16:41] <sayres_> ioria: this is syslog
[16:41] <Eric> Its said invaild to acess fat
[16:42] <Eric> On text screen
[16:43] <ioria> sayres_, it 's silly to ask, , but do you have another usb adapter to try ? :þ
[16:44] <sayres_> ioria: unfortunatly I don't have any adapter
[16:45] <ducasse> sayres_: RTL8188CUS - good luck with that...
[16:45] <ioria> sayres_, so.. if we are sure the problem is rtl8192cu module, reboot on the .31 kernel, get connection and try this https://github.com/pvaret/rtl8192cu-fixes
[16:46] <ioria> sayres_,  but maybe it would be easier to change the adapter
[16:46] <virtuosoj> Not having any success getting Steam running on Ubuntu 16.10
[16:47] <virtuosoj> steam
[16:47] <virtuosoj> tar: This does not look like a tar archive
[16:47] <virtuosoj> xz: (stdin): File format not recognized
[16:47] <virtuosoj> tar: Child returned status 1
[16:47] <virtuosoj> tar: Error is not recoverable: exiting now
[16:47] <virtuosoj> find: ‘/home/vijay/.steam/ubuntu12_32/steam-runtime’: No such file or directory
[16:47] <ducasse> !paste | virtuosoj
[16:47] <sayres_> ioria: ok i try it. but i think i have to prevent of kernel update till this issue fix
[16:48] <ioria> sayres_,  wait, after download the packages, you need to run the command on the -66 kernel
[16:49] <ioria> sayres_,  from this line  on
[16:49] <ioria> sayres_,  sudo dkms add ./rtl8192cu-fixes
[16:50] <CommonCents> Help!  My xubuntu won't boot.   when updates were installing, grub2 was upgraded and the grub-install that ran as the upgrade was installed complained that it couldn't delete /boot/grub/i386-pc/core.img
[16:50] <sayres_> ioria: ok .let me try
[16:51] <CommonCents> I've booted up the live cd, but I can't get grub-install to work.  It's failing with the same message
[16:52] <CommonCents> and I've tried sudo rm /boot/grub/i386-pc/core.img (after making a backup copy elsewhere) and that doesn't work either.
[16:52] <erialdo> hello, I wanted to clean the system with BleachBit (root) , more exact the apt packages clean autoremove etc
[16:52] <erialdo> but then an error occurred when i try to uupgrade
[16:52] <erialdo> E: Sub-process /usr/bin/dpkg returned an error code (1)
[16:52] <erialdo> how do i Solve it?
[16:53] <sayres_> ioria:i go to -66 kernel .
[16:53] <CommonCents> Why would root be unable to delete a file?
[16:55] <ducasse> CommonCents: filesystem could be read only, file could be immutable etc
[16:57] <CommonCents> It's mounted rw.  how do I know if it's immutable?  and how do I undo that?
[16:57] <virtuosoj> Anyone know anything about Steam issues? I want to stay on 16.10 but I'll probably just go back to 16.04 if Steam doesn't work
[16:57] <CommonCents> that's certainly possible.
[16:58] <geirha> run lsattr on it to see if it has any special attributes like the immutable flag
[16:58] <leaftype> virtuosoj, what have you done so far to try to get it to work? also, how did you install it?
[17:01] <MonkeyDust> virtuosoj  first create a .bak file of the file you want to modify, then try this, -i instead of +i      https://www.debuntu.org/how-to-make-a-file-immutablewrite-protected/
[17:01] <MonkeyDust> oops CommonCents ^^^
[17:02] <virtuosoj> leaftype, all I did was "sudo apt install steam" and I also tried doing "sudo apt install steam --reinstall"
[17:03] <virtuosoj> MonkeyDust, don't know how to create a .bak file
[17:04] <MonkeyDust> virtuosoj  that wasnt for you, i mistyped
[17:05] <k1l> erialdo: put all the output to paste.ubuntu.com and show the link here
[17:05] <k1l> and bleachbit and such are a straight way to ruin the system
[17:05] <MonkeyDust> CommonCents   first create a .bak file of the file you want to modify, then try this, -i instead of +i      https://www.debuntu.org/how-to-make-a-file-immutablewrite-protected/
[17:05] <leaftype> On 16.10 myself. I downloaded the .deb file. I'm not sure why, but I vaguely recall a problem with the repo version
[17:05] <andyfied> virtuosoj: i've had issues with steam on certain installs too. i've used this solution https://askubuntu.com/questions/771032/steam-not-opening-in-ubuntu-16-04-lts which has worked for me
[17:06] <CommonCents> That got it, monkeyDust
[17:06] <leaftype> I think it has to do with the version maintined by valve
[17:09] <leaftype> virtuosoj, IIRC the software boutique (made for Ubuntu Mate, but available on both) installs it correctly as well
[17:14] <k1l> virtuosoj: what did pproduce that error?
[17:16] <virtuosoj> leaftype, thank you, I will try that!
[17:16] <virtuosoj> k1l, Just typing "steam" in terminal, which I tried because Steam wouldn't open after installing/updating
[17:17] <virtuosoj> oh yeah that's the weird thing, it opened the first time to do its own update, but after that it won't open now
[17:17] <virtuosoj> reinstall doesn't seem to change anything
[17:17] <Eric> Hey
[17:18] <virtuosoj> Hey Eric :)
[17:18] <Eric> It said can not mount /dev/loop0 on /cow
[17:18] <k1l> virtuosoj: purge it with apt.
[17:18] <Eric> On text screen
[17:18] <alkisg> I boot a system with a live cd. I mount /dev/sdb1 which is ext4, and dd if=/dev/zero of=1 mb file there in a loop (on the same file, i.e. just writing data to disk).  After 5 minutes the hard disk slows down from 100 mb/sec to 1 mb/sec. Temperature is 40 celcius. The disk is new 4 tb, it's on a new server that has fakeraid support, but disabled from the bios, so only one disk is used. Any ideas what can cause this?
[17:19] <sayres> ioria: are you here?
[17:20] <pavlos> alkisg, can you check smartctl on sdb? any errors?
[17:20] <Eric> Do i need livecd right?
[17:21] <k1l> virtuosoj: try to remove the ~/.steam/ubuntu12_32/steam-runtime.tar.xz file
[17:21] <dn1987p> alkisg, you could check dmesg for any issues
[17:21] <alkisg> pavlos: no errors, although i have millions of read errors which on seagate disks are 48 bit smart data and are supposed to be shifted right 32bits => which leaves me with 0 errors when I do that, while those millions are interpreted as "seeks", not errors (according to an askubuntu question)
[17:21] <ioria> sayres, yeah, no luck ?
[17:21] <alkisg> dn1987p: nothing in dmesg after the 20 sec boot time, even if the server is up for hours
[17:22] <dn1987p> alkisg, maybe something wrong with the file system alignment?
[17:22] <sayres> ioria: It seems that the problem is solved. now i am in -66 kernel
[17:22] <ioria> sayres, very good job
[17:23] <dn1987p> sayres, cool :) what did you do to fix it?
[17:23] <k1l> ioria: what was the issue on his system?
[17:23] <alkisg> dn1987p: ducasse also hinted on that, but I think it's fine; but even if I wasn't able to diagnose that, wouldn't the speed be constant to 1/4 or so of the theoretical maximum? It shouldn't slow down after 5 minutes then...
[17:23] <sayres> ioria: thank you so much dude
[17:23] <ioria> k1l, bad rtl8192cu module , i guess
[17:23] <k1l> hmm, ok
[17:23] <ioria> sayres, no problem
[17:23] <sayres> dn1987p: i use this link .   https://github.com/pvaret/rtl8192cu-fixes
[17:24] <dn1987p> alkisg, 5 min is weird, i thought the cache might run full, but that shouldnt take 5 min
[17:24] <sayres> ioria: i stouk for a month buddy .you safe me dude.
[17:24] <ioria> sayres,  ahahah
[17:24] <sayres> ioria: i stuck for a month buddy .you safe me dude.
[17:25] <ioria> sayres,  i got it
[17:25] <alkisg> dn1987p: I run dd with conv=fdataconv; and "sync" inside the loop, so I don't think it's a matter of cache. I think I also tried including echo 3 > /proc/sys/vm/drop_caches in the loop, with no visible changes
[17:25] <sayres> ioria: sorry but my english :-)
[17:25] <ioria> sayres,  no problem
[17:26] <sayres> ioria: thanks again
[17:26] <ioria> sayres,  you're welcome :þ
[17:26] <dn1987p> alkisg, stupid idea, try another port maybe?
[17:27] <alkisg> dn1987p: I'll take any ideas at this point; I'll do so, ty... :)
[17:29] <thyriaen> Hi, i got a 2.1 setup and my subwoofer does not seem to be working. if i let the test gui put sound on each speaker seperatly it can do that with left and right but there is no sound comming out of the subwoofer this is my /etc/pulse/daemon.conf http://pastebin.com/gW4VdxCb - i already changed enable-lfe-remixing to yes
[17:31] <victoriano> spanish?
[17:32] <alkisg> !es
[17:34] <YmFzZTY0> Quick question, Is there anything wrong with formatting my Ubuntu partition if I'm re-installing it? I can't see anything wrong with it, but every page I visit says not to
[17:34] <k1l> YmFzZTY0: you dont need any data on the drive?
[17:35] <YmFzZTY0> I've backed up all the data that i need
[17:35] <k1l> YmFzZTY0: then you can check to format the partition
[17:35] <YmFzZTY0> thanks!
[17:36] <ioria> YmFzZTY0, dual boot ?
[17:36] <YmFzZTY0> yeah
[17:36] <ioria> YmFzZTY0, wait ....
[17:36] <YmFzZTY0> oh no...
[17:37] <ioria> YmFzZTY0, no, it's ok, grub will be reinstalled
[17:37] <YmFzZTY0> ioria: you had me so worried there
[17:38] <ioria> YmFzZTY0, sy, when you remove ubuntu you erase the bootloader
[17:38] <ioria> YmFzZTY0, but if you reinstall it, it should be fine
[17:39] <YmFzZTY0> OK, thanks!
[17:39] <bintopanicking> guys i seem to have a large name on my external wifi card does anybody know how to permanantly change it to something more simple like bob?
[17:41] <FMan> lol
[17:42] <_sfiguser> hello all, i have a problem with my linux, "NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s!"; it doesn't poweroff or shutdown... i do it manually after these messages, and the brightness sometimes dims... with no particular cause... can it be something related to acpi  ?  it is a 4.4.0-53-generic kernel
[17:47] <virtuosoj> k1l http://paste.ubuntu.com/24165747/
[17:48] <k1l> virtuosoj: what ubuntu is that exactly?
[17:48] <k1l> i only find debian people with such issues
[17:49] <virtuosoj> k1l, ubuntu 16.10
[17:49] <virtuosoj> freshly installed basically. I'm going to now try to install it with the Mate software boutique
[17:49] <virtuosoj> and if that doesnt work i might just go back 16.04.2
[17:49] <k1l> virtuosoj: wait
[17:49] <iamtheone> quit
[17:50] <k1l> virtuosoj: run "sudo apt update && sudo apt full-upgrade" first.
[17:50] <virtuosoj> k1l, that did nothing
[17:50] <virtuosoj> 0 upgrade
[17:50] <k1l> virtuosoj: then "sudo apt install libxtst6:i386 libxrandr2:i386 libglib2.0-0:i386 libgtk2.0-0:i386 libpulse0:i386 libgdk-pixbuf2.0-0:i386"
[17:51] <virtuosoj> k1l, eyy it worked! ty!
[17:52] <virtuosoj> although my question now: why is it running in 32bit mode?
[17:52] <k1l> steam is the 32bit hell
[17:52] <virtuosoj> or am I understanding that wrong
[17:52] <k1l> because they didnt make it work with 64bit at all.
[17:52] <virtuosoj> that's... fucked up...
[17:53] <OliPicard> hey everyone, ive tried upgrading the Kernel of my Ubuntu 16.04.02 distro however selinux-policy-default is erroring out with "error processing package selinux-policy-default (--configure):  subprocess installed post-installation script returned error exit status 137" after attempting to upgrade to kernel 4.4.0.66.70.  If i purge the default policy my system
[17:53] <OliPicard> is able to update to the next kernel. Does this mean SELinux is no longer compatible?
[17:55] <bintopanicking>  guys i seem to have a large name on my external wifi card does anybody know how to permanantly change it to something more simple like bob?
[17:55] <bintopanicking>  guys i seem to have a large name on my external wifi card does anybody know how to permanantly change it to something more simple like bob?
[17:56] <OliPicard> The version of SELinux I am using is 2:2.20140421-9 (if anyone wants to look at it for reference.)
[17:57] <YmFzZTY0> I have non UbuntuInstaller files on my Installer Disk, this causes the installer to crash, after it says 'scanning the CDrom' is there a fix to this other than removing the files on the drive?
[17:59] <virtuosoj> k1l, everything working great, thanks!
[18:02] <YmFzZTY0> Sorry for repeating my question, but is there a way to make sure that the UbuntuInstaller  doesn't crash even though there are extra files on the UEFI Installer Disk
[18:05] <HighMans> I have the On Screen Keyboard enabled in Universal Access but how do I make it show up?
[18:05] <HighMans> I need to use it as a virtual number pad
[18:06] <OliPicard> if anyone wondered what the resolution was for the help I requested it was stopping all processes (it was a memory problem.)
[18:07] <turista> hello every1, I finally did install xfce4 yesterday but I don't know how to use it
[18:07] <turista> someone told me that it would prompt me after the reboot but nothing happend
[18:08] <k1l> turista: install "lightdm"
[18:08] <k1l> turista: that is the login screen. that will prompt you then to login to the gui :)
[18:09] <turista> gosh, I didn't know about it, lemme check
[18:09] <k1l> turista: yes, only installing xfce doesnt install a *dm
[18:10] <turista> by the way, since some days ago I manually set the screen resolution of the computer cuz after the restart it always drop a bunch of errors
[18:10] <YmFzZTY0> please may someone advise me on how to stop the Ubuntu Installer from crashing
[18:11] <MonkeyDust> YmFzZTY0  describe the symptoms, in one line
[18:11] <turista> with the xrandr and I was wondering if I can set it up directly on a file
[18:11] <turista> btw I did install the stuff, should I restart now?¿
[18:11] <k1l> YmFzZTY0: i dont understand what the issue is.
[18:12] <Eric_____> hi
[18:12] <YmFzZTY0> Crashes after showing 'scanning the CD-rom' this is probably because I have unrelated files also on the Disk, I am 'unable' to remove these files as I need them and they're too large to transfer
[18:12] <Eric_____> i did installed ubuntu iso on poweriso then its worked
[18:13] <YmFzZTY0> By the disk, I mean my flash drive with Ubuntu Installer
[18:13] <k1l> YmFzZTY0: you are using the ubuntu usb?
[18:13] <YmFzZTY0> k1l, yes
[18:13] <Eric_____> then i need help with dual windows 10 and ubuntu on one laptop
[18:13] <makda7> someone using tomcat server on ubuntu here?
[18:14] <Eric_____> kl?
[18:14] <Eric_____> yup kl
[18:15] <Eric_____> now im on ubuntu
[18:15] <ioria> YmFzZTY0, how did you do the stick ?
[18:16] <YmFzZTY0> ioria: unetbootin,  using Ubuntu, I then later added a folder with my backup files onto that USB stick
[18:16] <k1l> YmFzZTY0: is that a usb pendrive or a hdd?
[18:16] <k1l> YmFzZTY0: unetbootin is known to make issues.
[18:16] <YmFzZTY0> k1l, it's a usb pendrive
[18:17] <ioria> YmFzZTY0, oh, i'am not good in customized ubuntu isos
[18:17] <ioria> YmFzZTY0, on ubuntu i suggest dd, on win rufus
[18:17] <Eric_____> ymfzzty8 u need PowerIso easy
[18:18] <Eric_____> PowerIso is easy
[18:18] <k1l> YmFzZTY0: the adding files should not make issues. but unetbootin makes issues since it changes the bootloader(syslinux) stuff
[18:18] <turista> I wonder wich's the next step after installing lightdm >_<
[18:18] <turista> should I restart now?¿
[18:18] <k1l> turista: reboot?
[18:18] <turista> thx gonna do that now
[18:20] <Eric_____> kl?
[18:21] <YmFzZTY0> Wait, nevermind, the error wasn't 'fatal', it just wasn't good, ubuntu should work. thanks for your help! I'm going to try the install
[18:21] <Eric_____> ymfzzty8 use powriso
[18:22] <Eric_____> poweriso
[18:23] <Eric_____> kl you there?
[18:24] <riccardo> Hello
[18:24] <riccardo> I have a strange problem as of yesterday
[18:24] <riccardo> My external disk does not work
[18:25] <riccardo> It is somehow recognized but it is not accessible
[18:25] <Eric_____> kl?
[18:25] <EriC^^> riccardo: any errors?
[18:25] <k1l> riccardo: please put the output of "dmesg" on paste.ubuntu.com after you attached the hdd
[18:26] <_pepe> hey all, I am getting a system freeze when my system tries to connect to wifi, 16.04 Mate.  Last working kernel version 4.4.0-62.
[18:26] <Eric_____> k1
[18:27] <Danzeel> Client: HexChat 2.12.3 • OS: Ubuntu "yakkety" 16.10 • CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2.14GHz) • Memory: Physical: 5.7 GiB Total (4.0 GiB Free) Swap: 3.9 GiB Total (3.9 GiB Free) • Storage: 102.7 GB / 716.7 GB (614.0 GB Free) • VGA: Intel Corporation 4 Series Chipset Integrated Graphics Controller @ Intel Corporation 4 Series Chipset DRAM Controller • Upti
[18:27] <Danzeel> me: 4h 31m 33s
[18:27] <ioria> riccardo, and ls -l /media/$USER
[18:27] <Eric_____> -_-
[18:27] <riccardo> https://paste.ubuntu.com/24166019/
[18:27] <Danzeel> sorry
[18:27] <Danzeel> weong chan
[18:27] <ioria> riccardo, and ls -Rl /media/$USER
[18:27] <riccardo> Ok one sec
[18:28] <ioria> riccardo, mmm, nvm
[18:28] <riccardo> total 8
[18:28] <riccardo> drwx------ 2 root root 4096 mar 12 00:10 Riccardo
[18:28] <riccardo> drwx------ 2 root root 4096 gen 12 21:05 Riservato per il sistema
[18:28] <riccardo> total 0
[18:28] <riccardo> total 0
[18:30] <riccardo> ioria
[18:30] <riccardo> Here's the log you requested in addition
[18:30] <riccardo> Hope it is correct
[18:31] <ioria> riccardo,   so you have nothing inside     /media/$USER ?
[18:31] <strive> Question on dpkg: When does dpkg -S come in handy?
[18:31] <EriC^^> strive: when you want to find which package gives a file you have
[18:32] <riccardo> ioria, Nothing at all
[18:32] <ioria> riccardo,   sudo parted -l | pastebinit
[18:33] <riccardo> Ok sure
[18:35] <riccardo> ioria, it is taking quite a long time and nothing output yet
[18:35] <Eric_____> k1?
[18:35] <ioria> riccardo,   mmmm
[18:36] <ioria> riccardo,   wait a bit... then kill it
[18:36] <riccardo> But when I detach the hard disk I am having problem with, parted runs smoothly
[18:36] <riccardo> Indeed I forgot to say
[18:36] <_Trullo> I got a problem with booting into my system.. I choosed a older kernel and now I'm in.. but how do I fix my system now?
[18:37] <ioria> riccardo,   btw, it's not mounted in nautilus, right ?
[18:37] <riccardo> ioria,  That if for example I boot or shutdown with the HD plugged, it stucks
[18:37] <riccardo> ioria, not mounted
[18:37] <k1l> _Trullo: run "sudo apt udpate && sudo apt full-upgrade"
[18:38] <riccardo> ioria, nautilius does not see it
[18:38] <ioria> riccardo,   ok, unplug, replug and dmesg | tail
[18:38] <k1l> _Trullo: sorry typo: "sudo apt update && sudo apt full-upgrade"
[18:38] <ioria> riccardo,   unplug and replug the disk i mean
[18:39] <Eric_____> i need help with win 10 and ubuntu
[18:39] <Eric_____> do i need grub customizer?
[18:39] <k1l> no
[18:39] <Eric_____> how
[18:39] <strive> EriC^^: So, basically dpkg -S is good to check for dependancies on a certain command?
[18:39] <riccardo> ioria, https://paste.ubuntu.com/24166089/
[18:40] <_Trullo> k1l, processing was halted because there were too many errors..
[18:40] <ioria> riccardo,   uname -r
[18:40] <strive> EriC^^: So, it would be ideal to which (command), then dpkg -S /path/to/file
[18:40] <k1l> _Trullo: can you put the output on paste.ubuntu.com and show it here?
[18:40] <strive> EriC^^: Does that seem practical>
[18:40] <riccardo> 4.10.1-041001-generic
[18:40] <riccardo> ioria,
[18:40] <Eric_____> i want dual
[18:40] <ioria> riccardo,   wow
[18:41] <Eric_____> of win 10 n ubuntu
[18:41] <ioria> riccardo,   do you have a stock kernel ?
[18:41] <k1l> !dualboot  | Eric_____
[18:41] <k1l> Eric_____: read that, follow the instructions.
[18:41] <ioria> riccardo,   like 4.8 or 4.4 ?
[18:41] <strive> Eric_____: Dual-booting is quite easy on Windows 10. Are you familiar with shrinking your hdd from Disk Management in Windows?
[18:41] <EriC^^> strive: yeah it is, also if you pass it a symlink it won't work, i was just messing about with finding which package my nc was from minutes ago, dpkg -S $(readlink -f /bin/nc) helped go through the maze of symlinks
[18:42] <ioria> riccardo,   that kernel it's not stock
[18:42] <strive> EriC^^: You rock dude, thank you.
[18:43] <Eric_____> it wont install without Grub Boot loader
[18:43] <_Trullo> k1l, http://paste.ubuntu.com/24166111/
[18:43] <EriC^^> strive: no problem
[18:44] <k1l> _Trullo: so what did you do before this problem?
[18:44] <k1l> _Trullo: because that is a lot of missin updates
[18:45] <k1l> Eric_____: you need grub to boot ubuntu. so follow the instructions
[18:45] <riccardo> ioria, it comes from mainline
[18:45] <riccardo> ioria, I suppose so
[18:46] <Eric_____> how to get grub
[18:46] <_Trullo> k1l, ubuntu wanted to install the latest upgrade
[18:46] <ioria> riccardo,   i know... what ubuntu 16.10 ?
[18:46] <k1l> riccardo: the mainline kernels are not stock kernels and miss some features from ubuntu
[18:46] <riccardo> ioria, how can I see what kernels I am using
[18:46] <ioria> riccardo,   i told you ... uname -r
[18:46] <k1l> Eric_____: the ubuntu insatller will install grub. so follow the regular instructions
[18:46] <riccardo> ioria, yes, that is the kernel I am using. I remember having some other kernel. Let me reboot to a stock one.
[18:47] <ioria> riccardo,   are you 16.10 or 16.04 ?
[18:47] <k1l> _Trullo: what is the output of "lsb_release -sd" and "uname -a"?
[18:48] <Eric_____> https://help.ubuntu.com/community/DualBoot right?
[18:48] <k1l> Eric_____: since you refused to answer my questions for details 2 days long i can only point you to the documentation and you will have to read it yourself
[18:49] <Eric_____> ok
[18:49] <_Trullo> Ubuntu 16.04.2 LTS Linux 3.13.0-106-generic #153-Ubuntu SMP Tue Dec 6 15:44:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
[18:49] <k1l> _Trullo: did you by any chance change the sources.list ?
[18:50] <_Trullo> no, I just booted it up today. and a question came up if I wanted to upgrade
[18:50] <k1l> _Trullo: so you did the 14.04 to 16.04 upgrade?
[18:50] <_Trullo> think so, it's was a big download
[18:51] <uddane> has anyone noticed that VLC downloaded from the software center won't automatically play the contents of a folder? I'm on 16.04
[18:51] <k1l> _Trullo: sudo apt remove insserv
[18:51] <k1l> _Trullo: then "sudo apt update && sudo apt full-upgrade"
[18:52] <_Trullo> too many errors
[18:53] <_Trullo> I got error on the first line too
[18:53] <k1l> show the output in pastebin
[18:54] <riccardo> ioria, nothing changed
[18:54] <clissold345> uddane, did you install the snap or the deb package? Someone told me the snap is a bit buggy.
[18:54] <ioria> riccardo,   uname -r
[18:54] <_Trullo> k1l, http://paste.ubuntu.com/24166165/
[18:54] <riccardo> I restarted, booted with linux 4.8
[18:55] <uddane> clissold345: IT was whatever was in the software center... it works fine on my laptop with 16.04 loaded...
[18:55] <ioria> riccardo,   same aoutput in dmesg | tail ?
[18:55] <k1l> _Trullo: sudo apt remove virtuoso-nepomuk
[18:56] <Eric_____>  Launchpad PPA for Grub Customizer right?
[18:56] <_Trullo> k1l, too many errors..
[18:56] <k1l> details matter
[18:56] <k1l> Eric_____: you dont need grub customizer at all
[18:57] <_Trullo> I'm going to try repair from a live cd
[18:57] <Eric_____> ill look for grub bootloader on google
[18:57] <k1l> _Trullo: did it work?
[18:57] <_Trullo> k1l, that last line? no
[18:57] <k1l> Eric_____: run the ubuntu usb and install ubuntu. it will install grub.
[18:58] <k1l> _Trullo: i dont see what you see. so its important to show the pastes
[18:58] <clissold345> uddane, Ubuntu Software lists two vlcs. Did you use Ubuntu Software to install? If you installed the snap try the deb package instead.
[18:58] <_Trullo> Processing was halted because there were too many errors.
[18:58] <_Trullo> E: Sub-process /usr/bin/dpkg returned an error code (1)
[18:58] <k1l> _Trullo: put all to paste.ubuntu.com because every detail matters
[18:58] <riccardo> ioria, 4.8.0-41-generic
[18:58] <ioria> riccardo,   same output in dmesg | tail ?
[18:59] <riccardo> ioria, riccardo@riccardo-PC:~$ dmesg | tail
[18:59] <riccardo> [  179.112083] usb 2-1: Manufacturer: ASMedia
[18:59] <riccardo> [  179.112084] usb 2-1: SerialNumber: 20150324001A6C
[18:59] <riccardo> [  179.772691] usb-storage 2-1:1.0: USB Mass Storage device detected
[18:59] <riccardo> [  179.772747] usb-storage 2-1:1.0: Quirks match for vid 174c pid 55aa: 400000
[18:59] <riccardo> [  179.772760] scsi host4: usb-storage 2-1:1.0
[18:59] <riccardo> [  179.772829] usbcore: registered new interface driver usb-storage
[18:59] <riccardo> [  179.774561] usbcore: registered new interface driver uas
[18:59] <riccardo> [  180.803165] scsi 4:0:0:0: Direct-Access     ASMedia  ASM1153E         0    PQ: 0 ANSI: 6
[18:59] <_Trullo> k1l, http://paste.ubuntu.com/24166183/
[18:59] <riccardo> [  180.803401] sd 4:0:0:0: Attached scsi generic sg2 type 0
[18:59] <riccardo> [  180.804269] sd 4:0:0:0: [sdb] Spinning up disk...
[18:59] <uddane> clissold345: I'm thinking I must have picked the wrong one, because I remember loading it by command line on my laptop... thank you for the help, I'm going to uninstall and load it through command line
[18:59] <ioria> riccardo,   don't paste in here, please
[18:59] <riccardo> ioria, yes the same output. Yeah I am sorry
[19:00] <ioria> riccardo,   'sg2' is odd
 _Trullo: sudo apt remove virtuoso-nepomuk
[19:00] <ioria> riccardo,   ever worked that disk ?
[19:00] <riccardo> Yes
[19:00] <riccardo> It has always worked
[19:00] <riccardo> Yesterday for no reason stopped
[19:00] <riccardo> Even with the 4.10 kernel
[19:00] <_Trullo> k1l, Package 'virtuoso-nepomuk' is not installed, so not removed
[19:01] <k1l> _Trullo: now "sudo apt-get install -f"
[19:01] <riccardo> The past days I installed VMWare and Virtual Box nd I removed them if that is relevant
[19:01] <k1l> need to go afk
[19:02] <ioria> riccardo,   you know how to edit the kernel boot line from grub ?
[19:02] <riccardo> ioria, nope
[19:02] <_Trullo> k1l, still no go.. too many errors..
[19:02] <riccardo> ioria, but I can learn it
[19:03] <ioria> riccardo,   you can try this parameter "usb-storage.delay_use=5"
[19:04] <riccardo> I paste it in the terminal?
[19:04] <ioria> riccardo,   nope :þ
[19:04] <apowl> I'm having trouble doing anything with a hard drive I just added. fdisk returns `fdisk: cannot open /dev/sdb: No such file or directory` -- but I know it's there and I see /dev/sdb exists.
[19:05] <apowl> Am I using the wrong utility?
[19:05] <riccardo> ioria, where then?
[19:05] <ioria> riccardo,   https://wiki.ubuntu.com/Kernel/KernelBootParameters
[19:05] <ioria> riccardo,   in grub
[19:05] <riccardo> ioria, thanks I read it
[19:05] <xheart> hi everyone, Can I use a .exe program on ubuntu 16.04?
[19:05] <anonymous> asdasd
[19:06] <anonymous> Anonymous
[19:06] <anonymous> EXPECT US
[19:06] <Sweepyoface> not without emulating
[19:06] <ioria> riccardo,   but i assume your disk is ok ... healthy i mean
[19:06] <Wirehunter> Or maybe running wine
[19:06] <Guest92594> &
[19:06] <Guest92594> #$%^&*()*)(&^@#!%^W($%
[19:06] <xheart> i want to copy a compact flash card
[19:06] <Wirehunter> xheart, Lookup Wine
[19:06] <Guest92594> ???????
[19:06] <Guest92594> ????????????????????
[19:06] <Guest92594> ??????????????????//
[19:06] <Wirehunter> xheart, what do you need to run an exe for then?
[19:07] <Wirehunter> xheart, can't you use dd?
[19:07] <xheart> the .exe is the flash card program exetension
[19:08] <xheart> i want to do an exact copy
[19:08] <EriC^^> xheart: to a same sized flash drive?
[19:08] <Wirehunter> xheart, I think you should look for an alternative, you can probably use dd to do that.
[19:08] <xheart> yes exact everything
[19:09] <xheart> i conect the flash card reader and usign the dd?
[19:09] <xheart> i connect the flash card reader and use the dd?
[19:09] <xheart> the dd is a program or a command?
[19:09] <EriC^^> xheart: yeah, get the names of the disks and do sudo dd status=progress if=/dev/sdX of=/dev/sdY bs=4M conv=sync,noerror && sync
[19:10] <EriC^^> if= is the source and of= is the destination
[19:10] <Dinosaurio> Hi
[19:10] <EriC^^> xheart: terminal command
[19:10] <Wirehunter> It's a program, but I think it's only available from terminal.
[19:10] <Dinosaurio> Is Unity 8 somehow stable?
[19:10] <xheart> but can i transfer the info to the pc then copy to the flash card?
[19:10] <Wirehunter> xheart, Yes
[19:11] <EriC^^> xheart: yeah, put of=/path/to/file bs=4M conv=notrunc,sync,noerror
[19:11] <Wirehunter> xheart, storage devices like flash cards are actually the same as a file
[19:12] <kalby-imanie> why is it always failed when i created bootable iso using dd command?
[19:12] <xheart> i copy/ paste  that command did not recognize
[19:12] <kalby-imanie> i failed to boot, i just tried to create ubuntu iso image
[19:13] <Wirehunter> xheart, you can't just copy it
[19:13] <kalby-imanie> i made me using windows again
[19:13] <kalby-imanie> it made me*
[19:13] <Wirehunter> xheart, you'll have to fill in the arguments
[19:13] <pavlos> xheart, what exactly do you want to do?
[19:13] <xheart> i want to transfer the file to the pc then copy to the flash card
[19:14] <pavlos> xheart, and where is that file?
[19:14] <xheart> on the compact flash card
[19:14] <pavlos> xheart, so you want to copy a file from flash to the pc, right?
[19:14] <Wirehunter> xheart, You wanted to clone the compact flash right?
[19:14] <xheart> yes
[19:15] <xheart> yes
[19:15] <Wirehunter> xheart, or just a file?
[19:15] <apowl> Weird: gdisk is telling me -- Disk /dev/sdb: 0 sectors, 0 bytes
[19:15] <xheart> clone the compact flash
[19:15] <apowl> But it's a 3TB disk?
[19:16] <Wirehunter> xheart, check with your 'disks' utility what dev your compact flash is.
[19:16] <Wirehunter> Or does anyone know a better way to determine that?
[19:17] <pavlos> xheart, insert flash, df should list the device
[19:18] <xheart> ok
[19:19] <pavlos> xheart, something like /dev/sdX where X is b,c,d,e,f, ...
[19:20] <apowl> xheart: if you run df -h, you can identify it by its size -- you may have a few devices in /dev/sd*
[19:20] <debioul> hi. i want to install ubuntu 5.04 (yes, srsly) on a 64bit machine. will that be possible with the installation files available in the ubuntu archives?
[19:20] <xheart> ok
[19:20] <xheart> you like sudo apt df?
[19:20] <pavlos> debioul, rather old release
[19:21] <Wirehunter> xheart, No
[19:21] <Wirehunter> Should be installed by default
[19:21] <xheart> ok
[19:21] <Wirehunter> just run df -h
[19:21] <Wirehunter> Then you see what devices are mounted and what size they are. Then say whish /dev/xxxx file your compact flash is
[19:22] <xheart> correct
[19:22] <xheart> sda1
[19:22] <pavlos> xheart, you could try, lsblk
[19:22] <xheart> sdb1 also
[19:22] <Wirehunter> Like, if your card is 32gb and you find one that is 32G, what one is it?
[19:23] <pavlos> xheart, try this, lsblk | nc termbin.com 9999 and give us the url
[19:23] <apowl> be careful, sda1 may be your root partition..
[19:26] <Wirehunter> xheart, like pavlos said, just copy "lsblk | nc termbin.com 9999" in your terminal, you'll get an url. Share it with us, then we can see what storage devices are on your pc.
[19:26] <pavlos> xheart, sample output ... http://termbin.com/s7a3
[19:27] <apowl> TIL about termbin. Cool.
[19:27] <apowl> Ok, so I'm trying to force a new partition scheme on this disk I have. Starting to worry something is irrecoverably wrong.
[19:28] <Kostas> I am having trouble booting into my account
[19:28] <Kostas> Something about mdm
[19:28] <xheart> pavlos i will try with wine
[19:28] <Wirehunter> apowl, I didn't know about it too.
[19:28] <pavlos> xheart, why wine? we are working with ubuntu and linux
[19:28] <Kostas> So I went to terminal and startx now i am here
[19:29] <apowl> Here is the output I get when I print the partition table via gdisk: `Disk /dev/sdb: 0 sectors, 0 bytes`
[19:29] <Kostas> It is as if I am not connected to my file system
[19:29] <Wirehunter> Uh, I don't think that will work. That was what I adviced when he just asked about running exe files. Haha.
[19:29] <SebthreeBQM10HD> hi
[19:29] <pavlos> apowl, try fdisk -l <device> and throw the termbin at the end
[19:30] <apowl> It's not showing up via fdisk -l. that gives me: fdisk: cannot open /dev/sdb: No such file or directory
[19:30] <apowl> but gdisk does see it.
[19:30] <apowl> And I see /dev/sdb there.
[19:30] <jhonatan> #oieee
[19:30] <jhonatan> #vcs chupam?
[19:31] <pavlos> apowl, try sudo parted -l /dev/sdb | nc termbin.com 9999
[19:31] <Kostas> can anyone help me?
[19:31] <murrdawg> Has anyone had success mapping the Thinkpad X41 tablet buttons to their actual function?
[19:32] <OerHeks> Kostas, mint display manager?
[19:32] <murrdawg> I've followed the instructions here, but haven't had any luck with the buttons such as rotate screen: https://www.linux.com/learn/installing-ubuntu-904-ibm-x41-tablet
[19:33] <apowl> pavlos: sdb isn't showing up http://termbin.com/glpt
[19:33] <OerHeks> !pm | Kostas
[19:33] <murrdawg> I've got the screen to rotate, and the stylus works
[19:35] <OerHeks> no pm please, kostas i read only here
[19:35] <pavlos> apowl, replace parted with gdisk and give the url
[19:35] <Kostas> When I log on it first told me the mdm was not connected or that I am not the owner of my folder  then, i startx which i noticed the my folders looked diffeent, first i am at elivated privliges then I can not view into my file system because i do not have the permissions for it
[19:35] <OerHeks> Kostas, mint display manager?
[19:35] <apowl> Yeah, gdisk is the only that sees it. Reports this issue: http://termbin.com/jiat
[19:35] <Kostas> what is that?
[19:36] <OerHeks> Kostas, you say mdm, so i ask.
[19:36] <Kostas> oh i didnt know what that stood for
[19:36] <OerHeks> mint is not supported her, they have their own issues
[19:36] <Kostas> now when i log on it goes to a black screen with my mouse pointer free
[19:37] <pavlos> Kostas, there is a mint channel !mint
[19:37] <pavlos> apowl, sdb is empty
[19:37] <murrdawg> Is the scancode the same as a keycode?
[19:38] <apowl> pavlos: that's what's weird. It's definitely a disk, and it's 3TB.
[19:39] <pavlos> apowl, maybe you can try gparted (gui) and verify disk data, the partition table may be corrupt
[19:39] <murrdawg> I'm just not sure if it's picking up the keycodes (0x6c) and how I would map that to a command
[19:40] <apowl> pavlos: this a server, so no gui, but I'm trying to write a whole new partition table anyway.
[19:40] <apowl> pavlos: does it need a current table for that to be possible? I had thought not
[19:41] <Curry> does the age of a usb matter. will it wear out faster? Getting tails os so will be repeatedly booting of of it
[19:41] <pavlos> apowl, so the disk has no data, then parted should let you make new partition, format it, etc
[19:42] <OerHeks> Curry, more a Q for  ##hardware
[19:42] <Curry> OerHeks, aight thnx ill head over there
[19:42] <SebthreeBQM10HD> Curry, uhmm
[19:42] <SebthreeBQM10HD> Curry, hold on a dab off topic sure but
[19:42] <Curry> SebthreeBQM10HD, sure
[19:43] <SebthreeBQM10HD> Curry, yes if you ikeep on putting things on a usb, and taking off again etc,  that is more likely to wear out the usb more over time
[19:43] <riccardo> ioria, here I am
[19:43] <riccardo> I tried but I was not successful
[19:43] <SebthreeBQM10HD> Curry, plus ubs in genreal probably are only desgined to really last a few or so years, before they might have issues, I guess
[19:43] <ioria> riccardo,   does it work in another pc ?
[19:43] <murrdawg> Surprised noone here has had experience trying to map a hardware key to a command
[19:44] <Curry> SebthreeBQM10HD, aight. appreciate the info. i was just going to dedicate to staying as a bootable tails, so shouldnt be too much of a prob. but the usb is like 6 yrs old so ill find another one
[19:44] <riccardo> ioria, I am trying now
[19:44] <ioria> riccardo,   ok
[19:45] <SebthreeBQM10HD> Curry, a six years usb will probably work, but for more important things, I would suggest newer usbs yeah
[19:45] <SebthreeBQM10HD> a year or two or so, is still new in this context, if not used, and kept ok
[19:45] <apowl> pavlos: the issue is the 0 size. When I try to create a partition (via gdisk) I get: `Problem: partition 1 is too big for the disk.`
[19:46] <Curry> SebthreeBQM10HD, yea it was barely used, just a couple pdfs and stuff. should be good then. thnx
[19:52] <murrdawg> oh wait, or did the site refer to mapping the shortcut to the keycode, and then in the file, set the keycode to a mapped key on the keyboard?
[19:53] <zmaj> hi guys :D
[19:53] <zmaj> Im new
[19:54] <murrdawg> Woohoo! I think I figured it out haha. I'll have to try it tonight. Since the hardware key is mapped to a physical key, I then have to create a shortcut for the physical key to a command
[19:57] <pavlos> apowl, does this help? https://joshstrange.com/ubuntu-formatting-a-3tb-drive/
[19:58] <_Trullo> if I need to reinstall ubuntu, what do I need to backup?
[19:58] <murrdawg> When is rc.local grabbed? On startup?
[20:00] <zmaj> hey, any good server or room for mathematics discusions? :)
[20:01] <murrdawg> Anyone know how I can force on start-up to grab rc.local?
[20:02] <andrej> trying to replicate an existing machine. did the base install of 12.04 (I know, I know; I'm trying to see how an upgrade will affect the current box). The boxes are both x86_64
[20:03] <andrej> doing a dpkg --set-selection from a list of installed packages on the original tries to install a TON of i386 packages on the target - what's going on there?
[20:03] <ioria> murrdawg, what's the command you want to execute ?
[20:03] <murrdawg> ioria, I have a set of setkeymaps I want Ubuntu to recognize everytime on startup
[20:03] <murrdawg> ioria, they are stored in rc.local
[20:05] <murrdawg> ioria http://paste.ubuntu.com/24166566/
[20:05] <ioria> murrdawg,  have yo tried to make a script and run it in StartUp Applications ?
[20:06] <murrdawg> ioria I have made a script only for rotating the tablet screen, as per instructions here: https://www.linux.com/learn/installing-ubuntu-904-ibm-x41-tablet
[20:06] <murrdawg> well, 2 scripts
[20:07] <arunpyasi> Hello everyone, which nvidia driver package should I install for  GeForce GT 610 ?
[20:08] <arunpyasi> Is nvidia-340 correct ?
[20:10] <ioria> murrdawg,  idk if rc.local is the right place for that ... if you are on unity, type in sash Startup , put those command in a script and call it from there
[20:10] <ioria> *dash
[20:10] <riccardo> ioria, I do not know why
[20:10] <pavlos> arunpyasi, better to install whatever is recommended in the Software & Updates | Additional Drivers
[20:11] <murrdawg> ioria, I'm using gnome panel
[20:11] <riccardo> It is working
[20:11] <ioria> riccardo,   on what ? a windows machine ?
[20:11] <riccardo> On both
[20:12] <ioria> riccardo,   can you paste again dmesg ?
[20:12] <ioria> murrdawg,  look for Startup Applications or such
[20:13] <murrdawg> ioria thanks! I'll try that method tonight and see if I can get it working
[20:13] <ioria> murrdawg,  good luck
[20:14] <riccardo> ioria, I plugged the electrical plug more deeper
[20:14] <riccardo> https://paste.ubuntu.com/24166651/
[20:14] <riccardo> ioria, here's the report
[20:14] <ioria> murrdawg,  lol
[20:15] <bordicon>  #csua
[20:16] <Bashing-om> arunpyasi: nVidia wants ya to try the 375 version : http://www.nvidia.com/download/driverResults.aspx/114708/en-us . 367 version should work .
[20:16] <ioria> riccardo,   i see .. well, check if it's all ok
[20:16] <arunpyasi> Bashing-om, what about 375 ?
[20:17] <riccardo> ioria, all is okay
[20:17] <ioria> riccardo,    Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[20:17] <arunpyasi> Bashing-om, what should I run command to install the latest and stable one ?
[20:17] <riccardo> To make it work also on Windows, what should I do?
[20:17] <arunpyasi> Bashing-om, I mean 340
[20:17] <riccardo> ioria, yes, I am backing up the content so I can format it
[20:17] <ioria> riccardo,   good... if you want make it usable on win you need to format with ntfs
[20:18] <Bashing-om> arunpyasi: Think the 340 is too old .. but it is listed as workable : http://www.nvidia.com/Download/Find.aspx?lang=en-us ,
[20:19] <arunpyasi> Bashing-om, hmm ok thanks !
[20:20] <Bashing-om> arunpyasi: Easiest - greateest level of maintainability ' sudo apt purge nvidia* ; sudo apt update ; sudo apt upgrade ; sudo ubuntu-drivers autoinstall ; .
[20:24] <IhrFussel> Is it safe & reliable to use while read line for looping WHILE another script appends new lines to the looped file?
[20:26] <ioria> IhrFussel, #bash  is the right place
[20:31] <riccardo> ioria, is it dangerous to use fsck?
[20:31] <riccardo> In term of losing data?
[20:31] <ioria> riccardo,   you run it on unmounted partitions or drive
[20:32] <riccardo> fsck from util-linux 2.28.2
[20:32] <riccardo> e2fsck 1.43.3 (04-Sep-2016)
[20:32] <riccardo> WARNING!!!  The filesystem is mounted.   If you continue you ***WILL***
[20:32] <riccardo> cause ***SEVERE*** filesystem damage.
[20:32] <riccardo> Do you really want to continue<n>?
[20:32] <\9> i think that's a pretty clear warning
[20:32] <ioria> riccardo,   umount it
[20:32] <OerHeks> riccardo, you don't perform fsck on a mounted partition
[20:33] <\9> (imo fsck should abort and require a command-line switch there...)
[20:33] <OerHeks> https://help.ubuntu.com/community/FilesystemTroubleshooting
[20:34] <OerHeks> sudo touch /forcefsck # and reboot
[20:34] <ioria> riccardo,   it's easier in your case, because it's an external drive
[20:44] <Boo> H e l l o
[20:44] <lhavelund> H i  t h e r e
[20:44] <Guest86890> Nickserv
[20:44] <Guest86890> '-'
[20:45] <Guest86890> Tem br ?
[20:45] <Menzador> !Be | Guest86890
[20:45] <Menzador> Err...
[20:45] <Menzador> !br | Guest86890
[20:46] <Guest86890> ubottu vocẽ é br ? ;-;
[20:46] <Guest86890> A T A
[20:46] <Guest86890> KJKJKJKKJJJKJKJKJ
[20:46] <Guest86890> YBEHUJIDJIDIRHJOKweqjidpKORH#OJIWPOKehojIKPOUJDIWKOEJIRKO#D
[20:46] <OerHeks> Guest86890, stop that please
[20:47] <texla> !bootinfoscript
[20:47] <Guest86890> Naum
[20:47] <Guest86890> Oerheks Bot ? '-'
[20:47] <Guest86890> OerkHeks
[20:47] <Guest86890> Speak With me ;-
[20:47] <Guest86890> A vsf
[20:47] <Guest86890> fdp
[20:47] <OerHeks> Guest86890, this is ubuntu support, not a play channel
[20:48] <Guest86890> kkkkkkkj
[20:48] <Guest86890> eae men
[20:48] <Guest86890> OerHeks YOU ARE A BOT OR HUMAN ? '-'-'-'-'
[20:48] <Guest86890> F I L H O D A P U T A
[20:53] <cuddylier> How would I go about using a cronjob on an encrypted home directory? Seems like cronjobs can't run on it by default unless I have a SSH session logged in.
[20:53] <plexdave1> hey guys, i get this in "software" but my laptop is not the model family that is indicated.  any thoughts?  https://drive.google.com/open?id=0BwnW5Ri2FUpIdTZqRTFaSWtwV0k
[20:57] <st3fann> Hello, I am trying to git clone a directory onto my server, fresh install of debian, I just set the dns servers and for some reason it clones most directories, then randomly fails at one: Clone of 'https://github.com/QuickBox/quickbox_themes.git' into submodule path 'themes' failed
[20:57] <st3fann> it doesn't always fail at the same one either
[20:58] <OerHeks> plexdave1, is this on windows?
[20:58] <plexdave1> No.  this is in "software" on ubuntu
[20:59] <plexdave1> I am running ubuntu gnome and ubuntu studio on this machine for 2 different projects and the software app in both is telling me to do this.  I am just wondering if there's any way to get rid of it.  dell's site shows that I am on the most current "bios"
[21:00] <plexdave1> If I didn't absolutely need this machine I would run it to see if it bricks so I can let everyone know not to do it.  But alas, I am not made of money and this precision laptop was quite expensive.
[21:00] <OerHeks> plexdave1, oh, seems legit > Ubuntu 16.04 and later natively will notify you for BIOS updates https://www.dell.com/support/article/nl/nl/nlbsdt1/SLN171755/updating-the-dell-bios-in-linux-and-ubuntu-environments?lang=EN
[21:00] <OerHeks> i think that number is the bios number
[21:01] <texla> Trying to run bootinfoscript..getting syntax error near new line using sudo ${0} <outputfile> What wrong?
[21:01] <plexdave1> That's actually a model number schema for dell latitudes.  The series they are showing is 5th gen, I am on 6th gen.  It's all wrong, I didn't even think about running it, but I was just curious about it so here I am.
[21:01] <OerHeks> plexdave1,  to be sure, ask dell support?
[21:02] <OerHeks> plexdave1,  their docs say bios/firmware updates are (finally) possible
[21:02] <plexdave1> I get their newsletter for this model laptop and it alerts me to bios updates.  Is there any way to tell "software" to ignore that?  If someone else is using this machine, they might just think "oh an update"....
[21:02] <OerHeks> texla, post the output on paste.ubuntu.com to see
[21:04] <taras> hi folks
[21:04] <Guest13688> hi folks
[21:04] <pavlos> texla, go to the dir where the script is, sudo ./bootinfoscript  ... it will create a RESULTS file
[21:04] <texla> OerHeks, http://pastebin.com/2qwt9EgJ
[21:05] <OerHeks> texla, you need to be in the folder of that script first.
[21:06] <OerHeks> cd bla bla
[21:06] <OerHeks> or  sudo ~/Downloads/bootinfoscript
[21:07] <lerner> idont know how to start virtual machine manager from the shell
[21:07] <SebthreeBQM10HD> guest13688 hi
[21:07] <st3fann> lerner: what software?
[21:08] <lerner> so I cannot just start vmm, but I have to specify which host?
[21:08] <lerner> whonix gateway st3fann
[21:09] <Duckle> anyone in here who knows if it's possible to use TRRS headset remotes in ubuntu>
[21:09] <Duckle> ?
[21:10] <Duckle> It'd require an internal pullup on the mic line but that's usually needed for bias anyways, and then an ADC to read the voltage on the pin, but hey, it's a mic input :)
[21:10] <st3fann> lerner: hmm I can't find anything in the docs
[21:11] <st3fann> lerner: man virtualbox should help you out
[21:12] <texla> OerHeks, http://pastebin.com/EuuZ21jc
[21:13] <st3fann> texla: sudo bash ~/Downloads/bootinfoscript
[21:13] <Atomic20> I uninstalled pyton 3.5 with synaptic manager and that seems to remove a lot of files it took a while and I reinstalled it but a lot Of the files removed where not put back ..I noticed something going on with network manager and Firefox missing I rebooted and now it won't log in maybe Ubuntu desktop got removed ..I tried recovery mode and it won't access the internet but I have root and access to files with live CD.. I tried chroot but its a luks…
[21:13] <Atomic20> … hard drive and Ubuntu 16.10 installation CD does not see Ubuntu there to repair..
[21:13] <lerner> found it!! virt-manager
[21:13] <lerner> thx
[21:13] <st3fann> :D
[21:14] <Atomic20> any ideas?
[21:14] <st3fann> Atomic20: what do you mean it wont log in?
[21:15] <Atomic20> no desktop blue screen st3fann
[21:15] <st3fann> Atomic20: does it show you a terminal login screen?
[21:15] <Atomic20> its asks for a luks password and then freezes
[21:16] <st3fann> hmm
[21:16] <Atomic20> no but I can access root in recovery
[21:16] <st3fann> do that, and try running: apt-get install -f
[21:16] <st3fann> to try to fix missing dependencies
[21:16] <Atomic20> I tried that
[21:16] <st3fann> idk what you could have uninstalled
[21:16] <kulelu88> How do I upgrade the Ubuntu 14.04 kernel, which is 3.13 ?
[21:16] <OerHeks> texla, strange, never seen that erroe
[21:16] <OerHeks> c/error
[21:17] <Atomic20> st3fann recovery networking won't access internet
[21:17] <texla> st3fann, http://pastebin.com/vWW4C9zw
[21:18] <Wirehunter> kulelu88, Why would you want to? You can install the linux-hwe packages to use a newer kernal on LTS
[21:18] <Wirehunter> kulelu88, https://wiki.ubuntu.com/Kernel/LTSEnablementStack
[21:18] <kulelu88> Wirehunter: the software I am using requires 14.04
[21:18] <st3fann> Atomic20: what is the output of: cat /etc/network/interfaces
[21:18] <st3fann> Atomic20: is it configured properly? and wired or wireless?
[21:18] <Atomic20> st3fann nothing there I looked at that
[21:19] <st3fann> texla: can you post bootinfoscript on pastebin?
[21:19] <Wirehunter> kulelu88, And your hardware needs a newer kernel?
[21:19] <Atomic20> st3fann wired and it works on live cd
[21:19] <kulelu88> Wirehunter: I require overlayFS, which requires the 3.19 kernel
[21:19] <kulelu88> Wirehunter: is this the command to upgrade the kernel:  sudo apt-get install --install-recommends linux-generic-lts-xenial  ?
[21:19] <st3fann> Atomic20: you need to set up your interfaces then, not too difficult
[21:20] <Atomic20> st3fann how do I do that
[21:20] <st3fann> Atomic20: one sec finding some docs to help you out
[21:20] <Atomic20> thanks
[21:20] <st3fann> Atomic20: https://www.cyberciti.biz/faq/setting-up-an-network-interfaces-file/
[21:20] <Wirehunter> kulelu88, On server? Yes
[21:20] <Wirehunter> to 4.4
[21:21] <kulelu88> yes, thanks Wirehunter
[21:21] <st3fann> Atomic20: you need to copy the first code example if you want a static IP, or the second for DHCP
[21:22] <texla> pavlos, Finished. The results are in the file "RESULTS2.txt"
[21:22] <texla> located in "/home/ray/".
[21:22] <texla> not a debian package error
[21:22] <st3fann> Atomic20: once you have done that, you can run: service networking restart
[21:23] <Atomic20> thanks
[21:25] <mguy> How do I reset my monitor layouts/configuration in kde? After using some external monitors, when I log in all I see is a black screen and I can only move the cursor on the top edge of my monitor
[21:26] <alkisg> In gnome it's rm .config/monitors.xml; I don't know about KDE.
[21:27] <texla> st3fann, http://pastebin.com/njRjRm3z
[21:30] <st3fann> texla: whats the output of: ls /bin/bash
[21:31] <texla> st3fann, ray@ray-Kudu-Pro:~$  ls /bin/bash
[21:31] <st3fann> texla: nothing after that?
[21:31] <Peanut> Hi folks - I would like to make a different Kernel the default boot in grub. But I can't simply set the  number, because the Ubuntu Grub display is now 2 levels deep. Does anyone k now how to accomplish this?
[21:31] <st3fann> texla: apt-get install -y bash
[21:32] <\9> ls would print an error if it wasn't there...
[21:32] <\9> texla: what does it say when you press enter?
[21:33] <st3fann> ^^ oops
[21:33] <texla> st3fann, bash is already the newest version (4.3-14ubuntu1.1).
[21:34] <texla> \9 /bin/bash
[21:34] <\9> ok then bash is there
[21:36] <\9> pretty sure bash wouldn't print a syntax error if it didn't exist...
[21:37] <alkisg> Peanut: the easiest way is to make grub remember the last choice: http://askubuntu.com/questions/148662/how-to-get-grub2-to-remember-last-choice
[21:37] <Peanut> alkisg: Unfortunately, 'easiest' is kind of out, because grub crashes when I go t hrough the menu options.
[21:38] <Peanut> And now I end up booting into a not-so-functional kernel.
[21:38] <texla> st3fann, I get a results.txt file when running  sudo ./bootinfoscript but the results says its not a debian file
[21:38] <alkisg> Peanut: eh? if grub crashes while pressing keys in the menu you have more serious issues :D Are you using graphical grub? Anyway, the submenu syntax for grub is something like 0>2, want me to google it?
[21:39] <alkisg> Peanut: https://help.ubuntu.com/community/Grub2/Submenus#Setting_a_Main_Menu_entry_as_the_default
[21:39] <alkisg> Submenu Designation Examples
[21:40] <Peanut> alkisg: Thanks!
[21:40] <alkisg> np, but check for memory errors etc if grub crashes
[21:40] <Peanut> alkisg: I suspect it is the GPU built into my i6700k that is dying :-(
[21:41] <painkiller> /set
[21:41] <alkisg> You can use console/text mode in grub, not graphics
[21:43] <pavlos> texla, cat RESULTS2.txt | nc termbin.com 9999 and give us the url
[21:45] <TomyLobo> on 16.04, where do i put custom .service files that i write?
[21:47] <texla> pavlos, cat: RESULTS2.txt: No such file or directory
[21:47] <texla> Use netcat.
[21:48] <brokenffmpeg> Hello! I'm having trouble installing ffmpeg from the official repos. Whenever I try to run it I get the following: ffmpeg: relocation error: ffmpeg: symbol av_vdpau_get_surface_parameters, version LIBAVCODEC_57 not defined in file libavcodec.so.57 with link time reference
[21:48] <pavlos> texla, you just wrote the file is RESULTS2.txt ... be in that dir and issue the command
[21:48] <OerHeks> texla, ubuntu got nc standard, linuxlite not .. lolzz
[21:48] <texla> pavlos, http://termbin.com/tmb6
[21:53] <texla> OerHeks, Had to use Results.txt not2 got file bootinfoscript now
[21:56] <pavlos> TomyLobo, /lib/systemd/system/
[21:58] <TomyLobo> pavlos, thanks, i found conflicting information online :)
[21:58] <TomyLobo> some say etc, some say usr/lib, some say lib
[21:58] <pavlos> TomyLobo, the original systemd page is outdated, see https://wiki.ubuntu.com/SystemdForUpstartUsers
[21:59] <sdffff> any ubuntu studio users here?
[22:00] <cfhowlett> don't use "anyone ..." questions sdffff.  state YOUR issues and YOUR specifications
[22:00] <k1l> sdffff: i guess most are in the #ubuntustudio channel :)
[22:01] <sdffff> yeah but they are non responsive
[22:02] <sdffff> its like people sign up and don't say anything
[22:02] <sdffff> i'm thinking of just going back to ubuntu
[22:02] <k1l> sdffff: welcome to irc :)
[22:02] <brokenffmpeg> Guys the ffmpeg from the Ubuntu repos is broken something about a relocation error and undefined symbols. Or maybe it's the libavcodec package that's broken. What do I do?
[22:02] <cfhowlett> notify the package maintainer brokenffmpeg
[22:02] <k1l> brokenffmpeg: what is the command and error? put all that to paste.ubuntu.com and show the link
[22:03] <brokenffmpeg> https://paste.ubuntu.com/24167216/
[22:05] <brokenffmpeg> k1l: the command "ffmpeg" on it's own should show the configuration options that ffmpeg was built with, but instead I get what is in the paste link
[22:05] <brokenffmpeg> If I install any other packages like mpv and try to play a video, I get the same message
[22:06] <pavlos> texla, your fstab points to sda6 as / but at the very top, sda3 it marked bootable
[22:07] <pavlos> texla, is
[22:07] <wedgie> brokenffmpeg: how did you install it? Have you tried reinstalling it?
[22:07] <R0b0t1> Hello, I've tried to find a way to use tun/tap and bridge devices to allow a qemu guest to be accessed from external computers on my LAN but can't find one that does things in a way which integrates well with Ubuntu services. Does anyone have a suggestion?
[22:08] <R0b0t1> As it stands it seems like it works (the Windows VM is assigned an IP inside the subnet) however I can't ping that computer. Is there default configuration I need to change to allow it to be accessible, or?
[22:09] <brokenffmpeg> wedgie: "sudo apt install ffmpeg mpv" like you would install any package. I've removed those packages with "sudo apt remove ffmpeg mpv" and the related libavcodec packages, but when I reinstall the same thing happens
[22:13] <brokenffmpeg> I guess I'll just build my own until I can figure it out.
[22:15] <mario_> Ahojte, inšatloval tu niekto na linux minte Kiwix?
[22:15] <mario_> inštaloal
[22:15] <cfhowlett> in english, mario?
[22:15] <OerHeks> !mint | mario_
[22:16] <mario_> how can i get install kiwix?
[22:17] <cfhowlett> mario_, go to #linuxmint-help
[22:17] <mario_> allright
[22:19] <mario_> is this chat about ubuntu only?
[22:19] <cfhowlett> mario_, yes
[22:19] <OerHeks> mario_, yes, mint has its own issues.
[22:20] <mario_> oh..ok..thanks
[22:44] <R0b0t1> I need some help setting up bridged networking for QEMU. Can anyone link me to what they would recommend? I've searched for and found the most obvious pages, but nothing has anything that works.
[22:44] <R0b0t1> I need DHCP on the tap interface if that's possible.
[22:44] <apowl> I'm trying to get a service working on ubuntu 16.04. When I try to start it, I'm prompted for a password:
[22:45] <apowl> `[22:45] <R0b0t1> I have a tap device created and running and the guest can access the network through it, but I can't access the guest.
[22:45] <btobias> hey
[22:45] <btobias> i want to install this: https://www.linux-apps.com/content/show.php/wacom+tablet?content=114856
[22:45] <btobias> but i don't see how
[22:45] <apowl> Is there a way to configure the service to start without password required? I'd like this to start up automatically on boot
[22:45] <btobias> there is a ubuntu ppa repository
[22:45] <btobias> but besides adding it with apt-add-repository i don't see how i can get it to work on my computer
[22:48] <u11> join #diaspora
[23:08] <floro> hola
[23:22] <asadf> hello all
[23:23] <Jeff_Belladonna> hello asadf
[23:24] <OerHeks> original name
[23:24] <Jeff_Belladonna> thanx
[23:24] <OerHeks> mea culpa, yours is too, Jeff_Belladonna
[23:25] <Jeff_Belladonna> OerHeks no
[23:25] <Jeff_Belladonna> no tua culpa
[23:28] <pennTeller> Hi guys, a friend of mine was saying that ubuntu spies on people.. is this true? or is it a pile of bs?
[23:29] <OerHeks> pennTeller, change friend
[23:29] <pennTeller> OerHeks, lol I probably will.. but why do people keep bringing this up? is it or has it ever been true?
[23:30] <k1l> pennTeller: its FUD.
[23:31] <OerHeks> there *was* a plugin to search on amazon, default, but never spied.
[23:31] <pennTeller> k1l, I see
[23:31] <pennTeller> OerHeks, Oh yes the infamous Amazon thing..
[23:33] <OerHeks> whatever someone typs in google, or listens on the mediaplayer and enables lyrics, ubuntu did it .. gross
[23:34] <pennTeller> OerHeks, Im not sure I undestood that last comment, I apologize
[23:35] <OerHeks> np, just be carefull beiing on the internet.
[23:41] <Dizzyywoo> I've been server stacked for 4 months
[23:41] <Dizzyywoo> Well now I know what's going on
[23:42] <Dizzyywoo> Did the unaffiliated work for you finally?
[23:44] <OerHeks> Dizzyywoo, how is that related to ubuntu support?
[23:55] <murrdawg> Anyone here have experience with putting Ubuntu on a Thinkpad X41 laptop?
[23:56] <tomreyn> murrdawg: such poll type questions rarely provide the expected results. you'd better just ask you actual question
[23:56] <murrdawg> Well, I asked earlier, no answer. I have a Thinkpad X41, I have the rotate screen working, but I can't get the hardware buttons to map any of the actual things they are supposed to do
[23:57] <murrdawg> I've followed the instructions here: http://zootlinux.blogspot.ca/2009/06/thinkpad-x41-tablet-and-linux.html
[23:58] <tomreyn> hmm 2009 is rather old, maybe they no longer work on current systems.
[23:58] <tomreyn> thinkwiki.org is usually a good resource for thinkpad on linux
[23:58] <murrdawg> But, if I can get the rotate to work, I'm sure I can still button map the physical buttons to work
[23:58] <murrdawg> I did check out the thinkwiki.org, but it didn't provide much support with this
[23:59] <murrdawg> I used the coding table here:http://www.thinkwiki.org/wiki/Tablet_Hardware_Buttons