[04:43] hey [08:27] hello. Anyone could tell me how to deactivacte the most recent software checkbox in Ubuntu mate boutique ? [08:42] mwhat? [08:50] Ubuntu mate boutique was on version 16.04. I have clicked to get most recent softwares and now it is on 17.10 package source ! [08:52] vit, this is normal [08:55] ok, but i wanted to get back to standard install, so I have downgraded ubuntu mate welcome to 16.04.1. That's ok, but the checkbox is again in grey and not clickable... Thats not important. I will handle all that with synaptic if I need to... === led2 is now known as led1 [12:54] Hello fellow Ubuntu-Mate Users ! [14:02] hello room [14:02] I just installed ubuntu mate 17.04 [14:02] but my rtl wifi doesnt work [14:02] anyone could help me pls? [14:10] the steps to fixing this are: 1) find out more details about the wifi device 2) install a driver [14:10] let's start with 1 [14:10] press ctrl+alt+t to open a terminal, type lsusb and press enter [14:11] ok [14:11] i did [14:11] does the wifi card show up there? [14:11] if you're not sure it's ok [14:11] Bus 001 Device 004: ID 0bda:b008 Realtek Semiconductor Corp. [14:11] yes [14:11] ok good [14:11] hmm how do we find out more info about it [14:11] with lspci [14:12] nice [14:12] try it out [14:12] 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [14:12] so i think it is there [14:12] great [14:12] the ubuntu cd comes with some drivers [14:12] i mean usb stick [14:12] ok [14:12] plug it in, but don't reboot into it [14:13] ok [14:13] i did [14:13] did you get a folder? [14:13] yes [14:13] go to pool [14:14] ok [14:14] hmm [14:14] did [14:14] where is it [14:14] who r u? [14:14] i m in [14:14] the folder called pool [14:14] just looking around [14:14] maybe ubuntu doesn't come with a realtek driver 0_o [14:14] arduino_, random people who help each other :) [14:14] maybe [14:15] wtf [14:15] monah, i found this https://askubuntu.com/questions/590414/wifi-problems-with-rtl8723be-in-ubuntu-14-04 [14:15] ok [14:16] not sure if it will work [14:16] the iso of my usb stick of ubuntu doesn have any realtek driver [14:16] yeah my 16.04.2 iso doesn't have either [14:16] i have lag [14:16] pls help me [14:17] destination path 'rtlwifi_new' already exists and is not an empty directory. [14:17] from the git clone? [14:17] i m just retyping the commands i found on the site [14:17] can u hack minecraft? [14:17] monah, yeah which command was that error coming from? [14:17] i guess the git clone https/::blablabla [14:17] from this: [14:18] git clone https://github.com/lwfinger/rtlwifi_new/ [14:18] do this instaed [14:18] git clone https://github.com/lwfinger/rtlwifi_new/ wifi [14:18] ok [14:18] now it'll make a folder called wifi and go there instead [14:18] ok [14:19] btw which kernel is this [14:19] uname -a [14:19] uname -r is enough actually [14:19] Linux monah 4.10.0-22-generic #24-Ubuntu SMP Mon May 22 17:43:20 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux [14:19] let's hope that this works [14:19] oh [14:20] ok [14:20] yeah it should work [14:20] "This code will build on any kernel 3.0 and newer" [14:20] should be ok [14:20] so what should i do? [14:20] i m in [14:20] did it finish cloning? [14:20] cd wifi [14:20] https://github.com/lwfinger/rtlwifi_new/ [14:20] oh [14:21] hi Akuli2 :D we have the same name [14:21] oh thats arduino_ whatever [14:21] ohh [14:21] monah, from now on, when i type "$ blabla" it means "type blabla to terminal and press enter" [14:21] ok [14:21] monah, $ git clone https://github.com/lwfinger/rtlwifi_new/ wifi [14:22] do that if you didn't already do it [14:22] then [14:22] $ cd wifi [14:22] ok [14:22] monah@monah:~/wifi$ [14:22] great [14:22] $ make [14:22] it might take a while [14:22] ok [14:22] CC [M] /home/monah/wifi/base.o [14:22] CC [M] /home/monah/wifi/cam.o [14:22] CC [M] /home/monah/wifi/core.o [14:22] CC [M] /home/monah/wifi/debug.o [14:22] and still [14:22] yeah be patient :) [14:23] ok [14:23] i have a question [14:23] no need to copypaste me all the output [14:23] yes arduino_? [14:23] ok [14:23] sorry [14:23] no problem [14:23] are u hackers? === arduino__ is now known as Akuli3 [14:23] of course [14:23] arduino_, depends on what you call a hacker. do you mean someone who makes things or breaks things? === Akuli3 is now known as grongman32 [14:23] it doesn't matter [14:24] i prefer making stuff [14:24] try this: ooskar.com [14:24] thats cool akuli [14:24] can you tell me how to hack computers ? [14:24] and this: virus.com [14:25] can some op warn the arduino guy or tell him to go away or something? his stuff don't seem to have anything to do with ubuntu mate [14:26] yeah leave please [14:26] we are trying to work [14:26] okai [14:26] you are just a rat-boy [14:26] so i think it has just finished processing the command git [14:26] =,( [14:27] monah, you mean make? [14:27] good [14:27] $ sudo make install [14:27] arduino_, btw you can create your own irc channel for free [14:27] Install rtlwifi SUCCESS [14:27] arduino_, /join ##arduinolol [14:27] monah, great :) follow rest of the commands [14:28] yeahh [14:28] the commands? [14:28] on the thing i linked [14:28] sorry but which ones? [14:28] looks like you can just reboot and it should work [14:28] arduino_ leave this group [14:28] ah i should reboot? [14:28] who are the ops here [14:28] yeah [14:28] oh ok thnak you so much [14:28] i ll try it. [14:28] come back here if it doesn't work :) [14:28] thx [14:28] great thx [14:29] thx [14:29] iĺl try it to [14:29] too [14:29] iḿ bored [14:33] hi room [14:33] again it´me [14:34] well unfortunatly it didn´t work [14:37] hmm :( [14:37] then i dont know what to do [14:37] What are you trying to do? [14:37] ok [14:37] thx anyway [14:37] actually [14:38] my wifi rtl doesn´t work [14:38] which RTL? [14:38] rtl8723be [14:40] 16.04? [14:40] no [14:40] 17.04 [14:41] Have you tried following the steps here: https://askubuntu.com/questions/635625/how-do-i-get-a-realtek-rtl8723be-wireless-card-to-work [14:41] also I'd make sure to remove the conf file if you have it [14:41] ok [14:41] KTrad, no we haven't followed that yet [14:41] i ll try this one [14:41] You won't have to rebuild everytime the kernel is updated [14:41] KTrad, we did this one though https://askubuntu.com/a/593015 [14:42] oh ok, well this is based off the same code but built for DKMS and is one easy to install package [14:45] ok so i [14:45] add the repository [14:45] and installed the new one [14:45] lets hope it will work [14:45] kk [14:48] hi [14:48] did it work? [14:48] unfortunately no [14:49] is this a clean installation? [14:49] yeah [14:50] Linux monah 4.10.0-22-generic #24-Ubuntu SMP Mon May 22 17:43:20 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux [14:50] should be new enough [14:51] yes [14:51] actually i m looking at [14:51] and i sa [14:51] etc [14:51] modprobe [14:51] and i saw [14:52] iwiwifi [14:52] which didnt exist beforew [14:52] oh ok well didn't see this mentioned in the other post but they want you to uninstall the driver you compiled so do: sudo apt purge rtlwifi-new-dkms then reboot. Then follow the instructions here to uninstall the one you compiled. Then reinstall rtlwifi-new-dkms [14:52] eless-card-to-work [14:52] oops [14:52] one sec will get the link [14:52] https://ubuntuforums.org/showthread.php?t=2289959 [14:53] ok [14:53] reboot before each new step though [14:53] so i delete first? [14:53] Hopefully that will clean out any remnants. If not my only other advice would be to reinstall and then just install from the PPA [14:54] sudo apt purge rtlwifi-new-dkms first [14:54] i did sudo.. [14:54] then follow instructions in that link I just posted to uninstall the one you tried compiling [14:54] and now which steps u said to follow? [14:54] ok [14:54] after reboot reinstall from ppa [14:54] then reboot once more [14:55] ok [14:56] brb [14:56] ok [15:05] back [15:15] hi [15:15] any luck? [15:15] not yet [15:17] how to [15:17] remove the one i configured [15:17] how to remove the old rtl config? [15:18] https://ubuntuforums.org/showthread.php?t=2289959 [15:18] post 2 [15:18] i see but [15:18] it asks /cd/to/rtl [15:19] how could i figure out wher is this [15:19] in [15:19] etc [15:19] modeprobe.d [15:19] i dont have such file [15:19] i have [15:20] dkms.conf [15:20] and iwlwifi.conf [15:20] /path/to/rtl is the path where you git cloned the driver and compiled it [15:21] $ cd ~/wifi [15:21] ok but how i figure that out? i forgot it [15:21] ok [15:22] brb work again haha [15:22] ok [15:28] Unable to locate package rtlwifi-new-dkms [15:30] back [15:31] when did you get that error message monah? [15:32] If you got it at the: sudo apt-get install --reinstall rtlwifi-new-dkms linux-firmware that makes sense because rtlwifi-new-dkms is no longer installed [15:32] instead do: sudo apt install rtlwifi-new-dkms linux-firmware [15:35] hello [15:35] Did you get that? [15:35] just now [15:35] i have that error [15:35] sudo apt install rtlwifi-new-dkms linux-firmware [15:35] E: Unable to locate package rtlwifi-new-dkms [15:36] sudo add-apt-repository ppa:hanipouspilot/rtlwifi [15:36] try that first [15:36] then sudo apt update [15:36] ok [15:38] E: Unable to locate package rtlwifi-new-dkms [15:38] i got that message [15:38] :/ [15:38] try rebooting [15:38] even after upgrading my ppa [15:38] ok [15:38] after all the changes probably for the best anyways [15:38] Im trying to install PrestaShop , when i start the page to install the program its just poping up the loading bar and restart and its looping like that [15:39] https://www.prestashop.com/forums/topic/570830-ps-17-install-leads-to-an-infinite-redirect-loop/ Similar to that AtSchool ? [15:40] I'm not familiar with prestashop unfortunately [15:42] have you looked at using PrestaShop cloud? It looks to be completely free [15:42] actually [15:43] it sees my card but can´t connect to my modem [15:43] Can it see the wireless network though? [15:43] it sees it [15:43] ok good [15:43] thanks im reading [15:43] but when i put in my [15:43] password wifi [15:43] it wont connect [15:44] and it only sees my wifi [15:44] Is the signal really low? [15:44] no [15:44] yeahh [15:44] sorry [15:44] echo "options rtl8723be ant_sel=2" | sudo tee /etc/modprobe.d/rtl8723be.conf [15:44] it only marks one bar [15:44] try that in terminal and reboot [15:45] ok [15:45] That is supposed to fix the low signal issue [15:45] options rtl8723be ant_sel=2 [15:45] now i ll reboot [15:47] well the same thing [15:47] trying to connect [15:48] but than pops me up the little window to enter my password [15:48] when i do that\ [15:48] it wont connect [15:48] it pops it up everytime [15:48] Any specific error? Kind of frustrating you can finally see it but can't connect -.- [15:49] like now its trying to connect to wifi [15:49] even if i m on cable [15:50] https://askubuntu.com/questions/776341/wifi-password-can-be-entered-but-wont-connect-with-no-error-message [15:50] try disconnecting from cable before connecting to wifi [15:51] ok [15:51] https://askubuntu.com/questions/776341/wifi-password-can-be-entered-but-wont-connect-with-no-error-message/811293 [15:51] more info on that link [15:51] seems to be an issue [15:52] ok [15:55] if that doesn't work monah I'm all out of ideas other than a fresh install and directly installing from the PPA. It is possible there are some remnants from when you tried to compile yourself sticking around somewhere. [15:58] ok thank you [15:59] lunch time bbl [16:35] back [17:49] hello