[01:24] <Jack_Sparrow> !info pauvcontrol
[01:24] <ubottu> Package pauvcontrol does not exist in zesty
[01:24] <Jack_Sparrow> !info pavucontrol
[01:24] <ubottu> pavucontrol (source: pavucontrol): PulseAudio Volume Control. In component universe, is optional. Version 3.0-3build1 (zesty), package size 111 kB, installed size 732 kB
[03:15] <fokko> jello the house?
[03:16] <Jack_Sparrow> Aloha
=== pizzaops_ is now known as pizzaops
[09:33] <Mittens> hi guys
[09:36] <Mittens> noone's helping me in main #unbuntu atm, so I'm trying this channel, please. I have a HP laptop windows 10 I'm trying to download UBUNTU unto. (I don't need to keep windows 10, in fact I hate it coz of the constant updating). After some help, I managed to use a universal USB Installer, and I think I downloaded the right ISO
[09:38] <Mittens> at this point, my question is as follows: what am I supposed to do now? The operating system on my laptop's the same (win10), I'm assuming something was downloaded onto my flash drive (128gb), but now what? How do I open ubuntu?
[09:39] <sixwheeledbeast^> Mittens: You wish to install Ubuntu to replace your Windows 10 installation completely?
[09:40] <Mittens> ><
[09:40] <Mittens> YES?
[09:40] <sixwheeledbeast^> Have you ever done this type of thing before?
[09:40] <Mittens> it's my first time
[09:41] <sixwheeledbeast^> ok, well if you have a valid Live image on some media (USB) you need to shutdown Win 10 and boot your system to the media.
[09:42] <Mittens> crap
[09:42] <sixwheeledbeast^> This may involve going into your BIOS/UEFI and booting from USB
[09:42] <sixwheeledbeast^> Hopefully it will be setup to do that automagically
[09:43] <sixwheeledbeast^> What model HP is it?
[09:43] <Mittens> um brb
[09:45] <Mittens> HP... AMD...A6-7310 APU with AMD Radeon R4
[09:47] <Mittens> ummm
[09:48] <Mittens> sixwheeledbeast^
[09:48] <Mittens> thanx
[09:48] <Mittens> I shut my comp down and turned it on again
[09:49] <Mittens> and HP BIOS Update screen showed up "The system BIOS is being updated" <--- is this a good sign? 0.0
[09:49] <sixwheeledbeast^> It should boot to an installer and can run though the options.
[09:50] <Mittens> you wont believe how loud this is rn.. xD like a mini vacuuming inside
[09:50] <sixwheeledbeast^> Please note there is limited support for AMD APU's I think only and open source driver is available.
[09:50] <Mittens> thank you
[09:51] <sixwheeledbeast^> has the installer loaded?
[09:52] <Mittens> umm I dont think so still on the HP BIOS update screen progress at 100% now
[09:52] <Mittens> it says it's restarting and it is restarting "Flashing Boot Block" box is showing
[09:54] <sixwheeledbeast^> No idea why it's doing a bios update but ok.
[09:54] <Mittens> o.O
[09:55] <sixwheeledbeast^> let it do it's thing
[09:55] <Mittens> I think its still windows 10 I just logged in
[09:56] <Mittens> "This may involve going into your BIOS/UEFI and booting from USB "
[09:57] <Mittens> should I shut down the win10 now and then press Fs to get into BIOS?
[09:57] <Mittens> F2
[09:58] <sixwheeledbeast^> shut down again and let it boot with the USB inserted. If you have an option to "Boot From..." use that
[09:58] <sixwheeledbeast^> I imagine you hit an F key that was update BIOS by accident?
[09:59] <sixwheeledbeast^> I should plug using ubuntu-mate over ubuntu at this point too ;)
[09:59] <Mittens> I dunno I think it happened before I hit any key
[09:59] <Mittens> ?
[10:00] <sixwheeledbeast^> ok see what happens this time
[10:00] <Mittens> Press and hold the Power Button for 5 seconds to turn your computer completely off. Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.
[10:01] <Mittens> nothing happened..
[10:01]  * Mittens tries agaain
[10:01] <sixwheeledbeast^> by nothing you mean it boots to Win10?
[10:01] <Mittens> yes
[10:02] <sixwheeledbeast^> HP maybe a different key I would have to check. Maybe F11?
[10:03] <sixwheeledbeast^> Mittens: this is what we are trying to do https://support.hp.com/us-en/document/c00364979
[10:04] <sixwheeledbeast^> Set boot to USB before the hard drive, or select USB manually
[10:04] <Mittens> ok
[10:04] <Mittens> thankyou
[10:12] <Mittens> I cant figure it out... thanks for helping mee I wil have to retry tomorrow coz its 3am here... gnite and thanku god bless
[10:12] <Mittens> I cant figure it out... thanks for helping mee I wil have to retry tomorrow coz its 3am here... gnite and thanku god bless
[12:28] <hong> hello
[13:40] <ahmad> please how can i add a new dictionary to my dictionary list?
=== ubuntu-mate is now known as madsage
[16:03] <madsage> ELLO
[16:04] <madsage> still <3 Mate
[16:04] <madsage> thank you for the work/project
[16:05] <ouroumov_> hi madsage
[16:05] <madsage> greets
[16:05] <ouroumov_> madsage, 17.10 alpha 2 images are ready for testing if you want. ^^
[16:06] <madsage> oh?
[16:06] <madsage> where is changelog, i'll look at the website
[16:07] <madsage> sure I will help.
[16:07] <madsage> why not
[16:08] <madsage> I usually try some cazy shit. like compiz+emerald
[16:08] <ouroumov_> madsage, it's not released yet so there's no release announcement / changelog, but basically
[16:08] <ouroumov_> loads of bug fixes
[16:08] <madsage> cool
[16:08] <ouroumov_> and wimpy landed a HUD implementation for some of the panel layouts
[16:08] <madsage> hmm interesting
[16:09] <madsage> thanx wimpy
[16:09] <ouroumov_> http://cdimage.ubuntu.com/ubuntu-mate/daily-live/20170725.1/artful-desktop-amd64.iso
[16:09] <ouroumov_> oups
[16:09] <madsage> ok where do i get the iso. got it
[16:09] <ouroumov_> sorry wrong c/c
[16:09] <ouroumov_> https://ubuntu-mate.community/t/ubuntu-mate-17-10-artful-call-for-testers/14293
[16:09] <madsage> ok sweet
[16:10] <madsage> and defect submittal? forum for that?
[16:10] <madsage> i'll register and look around.
[16:11] <ouroumov_> ^^
[16:11] <ubuntu-mate> Hi
[16:19] <madsage> will 17.10 be LTS? i guess i can look at their roadmap
[16:19] <madsage> or thats will be in 18.x maybe'
[16:19] <krabador> madsage, not
[16:19] <ouroumov_> nah next lts is 18.04
[16:19] <krabador> madsage, 18.04 will.
[16:20] <madsage> got it. thanks
[16:20] <Jack_Sparrow> Be brave, give Mint Mate 18.2 a test drive
[16:21] <madsage> its ok. I'm upgrading to 17.x for the intel 01.com acceleration support. i'll find out of it has any issues with 17.10 :)
[16:21] <madsage> will do
[16:28] <madsage> i'll be testing the manual partition install. :)
[16:29] <madsage> see if it blows up my windows. hah  no loss there
[16:29] <madsage> win10
[16:30] <madsage> no work today, so I got time to look and check it out
[16:30] <madsage> where you guys located mostly. i'm in Arizona USA.  just curious where Mate calls home.
[16:31] <madsage> prob all over like any other project
[16:35] <Jack_Sparrow> So Cal Here
[16:35] <madsage> cool
[16:35] <Jack_Sparrow> Niece is in Phoenix
[16:36] <madsage> ahh, nice today. overcast. but been hot as hell. heh july in Phoenix
[16:36] <madsage> same here Phoenix area also
[16:37] <madsage> ok brb, i'll dd this iso to USB
[16:37] <Jack_Sparrow> No USB image writer ?
[16:38] <Jack_Sparrow> !find usb-image
[16:38] <ubottu> Package/file usb-image does not exist in zesty
[16:39] <Jack_Sparrow> mintstick -m iso
[16:39] <Jack_Sparrow> !info mintstick
[16:39] <ubottu> Package mintstick does not exist in zesty
[16:39] <Jack_Sparrow> !find mintstick
[16:39] <ubottu> Package/file mintstick does not exist in zesty
[16:39] <Jack_Sparrow> darn
[16:54] <Jack_Sparrow> !info abs-guide
[16:54] <ubottu> abs-guide (source: abs-guide): The Advanced Bash-Scripting Guide. In component multiverse, is optional. Version 10-2 (zesty), package size 1021 kB, installed size 4366 kB
=== sage__ is now known as madsage
[18:09] <madsage> cool. 17.10 artful :)
[18:09] <madsage> looks great
[18:11] <madsage> i did install with manual partitioning. it went fine. I'll mark it success.  I tried the live option first but, it didnt work. got to desktop and couldnt click anything.
=== sage__ is now known as madsage
=== idontknow is now known as Guest52155
[19:03] <Guest52155> hi xd
[19:03] <Jack_Sparrow> aloha
[19:03] <Guest52155> what its that?
[19:03] <madsage> heh
[19:04] <madsage> hola
[19:04] <Jack_Sparrow> Spanish backwards ?
[19:04] <madsage> :)
[19:04] <Jack_Sparrow> Hola madsage
[19:04] <madsage> guess he never been to hawaii
[19:04] <madsage> sup
[19:05] <madsage> new mate 18.2 is working nicely
[19:05] <Jack_Sparrow> lurking mostly
[19:05] <Jack_Sparrow> mint mate 18.2 here
[19:05] <madsage> I think I just pulled in a nightly 17.10 build
[19:06] <madsage> on buntu
[19:06] <madsage> cool
[19:06] <madsage> mint is buntu also init?
[19:07] <madsage> i've stuck with ubuntu mate. havnt tried the others. just a kali/debian rolling
[19:07] <Jack_Sparrow> https://gist.github.com/38b98f12647b0f605bef453228f90b65     this system info
[19:07] <Jack_Sparrow> kali has been causing issues and not playing well with the others
[19:08] <Jack_Sparrow> ubuntu and mint very similar
[19:08] <Jack_Sparrow> so this one is 18.1
[19:09] <madsage> yeah xenial
[19:09] <madsage> i see that
[19:09] <Jack_Sparrow> ive been running both
[19:09] <madsage> i was feeling brave today
[19:10] <madsage> Ubuntu Artful Aardvark (development branch) \n \l
[19:11] <Jack_Sparrow> :)
[19:11] <madsage> hows that atom run for you. ok?
[19:11] <Jack_Sparrow> I love it
[19:11] <madsage> nice
[19:11] <madsage> quad i see also
[19:11] <Jack_Sparrow> nothing special
[19:12] <madsage> i seen some 16core atoms recently
[19:12] <Jack_Sparrow> I have 4 asus that were only 250 on amazon.. all quads
[19:12] <madsage> at intel
[19:12] <madsage> for the autonomous car stuff
[19:13] <madsage> group next to me. my last contract
[19:14] <madsage> thought it would be cool to have one of those boards
[19:15] <madsage> i had zenphone with atom in it. loved it
[19:16] <madsage> we should be seeing a bunch of new iten arm stuff soon. fab42 is firing up to make a billion x64 10nm arm samples
[19:16] <Jack_Sparrow> I gotta run wife calls
[19:16] <madsage> s/iten/intel
[19:16] <madsage> later
[19:46] <doux> Is there a way to have new opened windows snap automatically to the position they were before they were closed?
[19:47] <doux> Or at least snap to one half or the other
[19:47] <doux> automatically on open.
[19:48] <Akuli> some programs remember the window position and put the window to the same place, but i'm not aware of a general way
[19:48] <doux> Akuli, thanks
[19:48] <Akuli> one handy thing you can do is to hold down alt and drag the window from anywhere
[19:49] <Akuli> like really anywhere on it, right in the middle if you like
[19:49] <Akuli> does the same thing as dragging it from the title bar
[19:56] <doux> wow. I went to move an icon on the top panel and both have disappeared. Help!
[19:57] <doux> bottom panel disappeared as well is what I meant by both.
[20:17] <frank_> allo
[20:17] <frank_> any one how can help
[20:31] <sixwheeledbeast^> Hold down Alt? Doesn't work here.
[23:59] <Jack_Sparrow> !info dd
[23:59] <ubottu> Package dd does not exist in zesty