| rardiol1 | I'm running the live usb 17.04 and I can't connect to wifi with a uss wifi connector. The connector works on another linux system. I select the network, put in the password, and it just works for a few seconds and then stops and says i'm disconnected. The rt2800usb driver is loaded. I just tried the 16.04 live and it worked. any idea why? | 00:30 |
|---|---|---|
| foxjazz | hi, just installed video drivers and I get /dev/sda1 clean, #/# files #/# blocks | 15:16 |
| foxjazz | any idea what to do? | 15:16 |
| === ZongvaX is now known as Zongva | ||
| xubuntu78i | hello? | 18:22 |
| foxjazz | trid installing radeon driver for linux, after reboot it fails to boot. | 19:21 |
| GridCube | foxjazz, go to a tty and try reinstalling, else just remove xorg.conf | 19:24 |
| _BIGSHOT_ | http://blog.crsantos.info/2015/01/25/apple-remote-a1156-intel-nuc-kodibuntu-14-helix-ir-keytables/ | 20:09 |
| _BIGSHOT_ | $ sudo vim /etc/init.d/make-ir-work <-- will this work on 16.04? | 20:10 |
| _BIGSHOT_ | what do i have to use instead of init.d? | 20:10 |
| well_laid_lawn | _BIGSHOT_: the init now is systemd | 20:11 |
| _BIGSHOT_ | well_laid_lawn, can you turn this script into systemd script? https://paste.ubuntu.com/25610043/ | 20:13 |
| well_laid_lawn | not at the moment | 20:13 |
| _BIGSHOT_ | aww man it's only 2 to 3 lines | 20:14 |
| knome | if it's only 2 to 3 lines, why don't you do it yourself? (: | 20:14 |
| knome | or in other words, line count doesn't tell the whole story | 20:15 |
| _BIGSHOT_ | knome, can you write it out? | 20:15 |
| _BIGSHOT_ | there are lots of echo in it | 20:15 |
| _BIGSHOT_ | systemd won't be too big | 20:15 |
| _BIGSHOT_ | script i.e. | 20:15 |
| knome | please | 20:16 |
| _BIGSHOT_ | huh? no man you don't need to show courtesy | 20:16 |
| testerbeta | hi | 20:19 |
| _BIGSHOT_ | line 1: modprobe -r nuvoton_cir line 2: sleep 1 line 3: sys/bus/acpi/devices/<strong>ITE8713</strong>:00/physical_node/resources line 5: ir-keytable -p NEC,RC6 -w <strong>/etc/rc_keymaps/apple_remote</strong> | 20:19 |
| testerbeta | i want know how much ram will need xubuntu (32bit) | 20:19 |
| _BIGSHOT_ | only 4 commands are there | 20:19 |
| testerbeta | i just need xubuntu with networkmanager (no more) | 20:19 |
| foxjazz | using ubuntu how do you install trendnet ethernet adapter | 20:19 |
| foxjazz | usb | 20:19 |
| _BIGSHOT_ | testerbeta, i guess 1GB is more than enough | 20:19 |
| knome | testerbeta, try checking https://xubuntu.org/getxubuntu/requirements/ | 20:19 |
| knome | _BIGSHOT_, please do not tell everybody on the channel your problem is "just 4 commands"; everybody here is volunteer and if they can help, they most likely will | 20:20 |
| _BIGSHOT_ | knome, relax bud, here have some soda | 20:21 |
| * _BIGSHOT_ give knome soda | 20:21 | |
| _BIGSHOT_ | gives* | 20:21 |
| foxjazz | GridCube: Hey so I had it working on linux server. so installed this | 20:21 |
| foxjazz | problem comes when I add a second card, the ethernet port is no longer available | 20:22 |
| GridCube | that sound very weird | 20:22 |
| foxjazz | yes, so I have got a usb to ethernet adapter | 20:23 |
| foxjazz | and before I put the second card in, I want to get it working | 20:23 |
| foxjazz | it's a Trendnet adapter | 20:23 |
| GridCube | second card of what? | 20:23 |
| foxjazz | the second video card | 20:23 |
| GridCube | oh, you want to have both running at the same time? | 20:24 |
| GridCube | i don't know how you can do that | 20:24 |
| foxjazz | well. I just need one | 20:24 |
| foxjazz | and since the second video card will break the on board adapter, it would be good to get this other one to work | 20:25 |
| foxjazz | when I installed xubuntu, it auto installed the usb adapter | 20:25 |
| foxjazz | with no issues | 20:25 |
| GridCube | as i said before the best thing i can come with is deleting the Xorg.conf file | 20:25 |
| GridCube | so you get reverted to the default drivers | 20:26 |
| GridCube | and that should work | 20:26 |
| foxjazz | I have linux server booted and running | 20:26 |
| foxjazz | what is xorg.conf delete going to do? | 20:26 |
| GridCube | make the system use generic drivers that where working before you installed the privative ones | 20:26 |
| foxjazz | I have the video drivers installed and working under linux server | 20:26 |
| GridCube | oh | 20:26 |
| GridCube | i don't understand the problem then | 20:27 |
| foxjazz | my current problem is this. when I add the second video card, it will make the ether net adapter stop working | 20:27 |
| GridCube | oh | 20:27 |
| foxjazz | I have a usb adapter | 20:27 |
| GridCube | right | 20:27 |
| foxjazz | if I can get that working before adding the card, then at least I have comms | 20:28 |
| GridCube | does the card show up with lspci? | 20:28 |
| foxjazz | lspi no command found | 20:29 |
| foxjazz | oo | 20:29 |
| GridCube | lspci | 20:29 |
| foxjazz | looking | 20:29 |
| foxjazz | i don't see it | 20:30 |
| GridCube | I'll bet then you have a hardware problem | 20:31 |
| GridCube | try removing the card and placing it again, or changing the slot is using | 20:31 |
| foxjazz | well ok, if it's hardware why was it working with xubuntu? | 20:31 |
| foxjazz | ok | 20:31 |
| foxjazz | sure | 20:31 |
| GridCube | because it might have moved when you added the vga | 20:31 |
| foxjazz | lsusb it sees it | 20:32 |
| GridCube | lsusb sees the usb one | 20:32 |
| foxjazz | yes | 20:33 |
| GridCube | thats not the one you want | 20:33 |
| foxjazz | I haven't added the second card just yet | 20:33 |
| foxjazz | I think when I add the card it will break ethernet | 20:33 |
| * GridCube facepalms | 20:33 | |
| foxjazz | so I need to get the usb ethernet adapter working | 20:33 |
| GridCube | it should just work | 20:34 |
| foxjazz | ifconfig doesn't have it listed | 20:34 |
| GridCube | I don't know how else to help you | 20:34 |
| GridCube | foxjazz, https://www.linux.com/answers/how-do-i-setup-network-card-if-linux-cannot-see-it | 20:35 |
| foxjazz | ok.. tx for the time | 20:36 |
| GridCube | I think you need to work on a problem at a time, if you want to have the ethernet pci card working or the usb one | 20:37 |
| GridCube | if the pci one doesnt work, try changing it's port | 20:37 |
| GridCube | maybe the mobo has problems with many cards at the same time? | 20:38 |
| GridCube | maybe the vga card is pushing the ethernet card and making it disconnect from the pins? | 20:38 |
| foxjazz | hmmm interesting | 20:58 |
| foxjazz | since I couldn't add the usb ethernet, I am trying the xubuntu install one more time, if that doesn't work on installing the vid drivers, I am just going to get another license for windows. | 20:59 |
| foxjazz | when installing -y why does it say invalid operation -y it just means yes right? | 21:18 |
| foxjazz | GridCube: how do I remove xorg.conf on boot | 21:21 |
| GridCube | if you can get to a tty go to /etc/X11/ and inside of it it should be there, if you dn't have one then you are already using the generic drivers | 21:26 |
| foxjazz | how do I get to a tty | 21:26 |
| foxjazz | it just comes up with that clean entry and doesn't do anything else | 21:27 |
| foxjazz | huh, should I try oem install? | 21:28 |
| foxjazz | I tried debian last night, and well there was no su, debian is screwed up. | 21:29 |
| foxjazz | installed oem | 21:49 |
| foxjazz | instead of updating distro, going to just install the driver and reboot. | 21:50 |
| foxjazz | fingers crossed | 21:50 |
| foxjazz | wow it's doing nothing | 21:53 |
| foxjazz | nada | 21:55 |
| foxjazz | gonna try one more thing | 21:55 |
| foxjazz | this is like the 5th time I have done an install or 7 this weekend... getting old | 22:04 |
| foxjazz | well linux is officially !@#$ | 22:31 |
| foxjazz | windows here I come... LOL | 22:31 |
| foxjazz | you would a thought after all this time, they would build a better linux. I am just going to virutalize a linux server under windows | 22:36 |
| === feodoran is now known as Guest8834 | ||
| === feodoran_ is now known as feodoran | ||
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!