[00:00] We just need to add it in same place on hammerhead? [00:00] yes [00:00] Okay, I'll try... [00:00] copy them to `/usr/lib/arm-linux-gnueabihf/gstreamer-1.0/` and reboot [00:01] @nfsprodriver, Thanks you all [00:05] I still don’t understand if [00:05] nexus 7 WiFi only is supported? [00:05] 2012 [00:05] seems like no [00:08] oh. seems like the 2013 isn’t either. [00:08] (Photo, 1080x1920) https://irc.ubports.com/fL7k8km4/file_1196.jpg [00:09] Will OnePlus 3T be a core devices for Ubuntu? [00:09] @mariogrip, Video still in green. [00:09] And... File manager keep crashing when opening folders with big amount of files 😢 [00:10] @riccardovidotto, OnePlus 3 is getting a lot of support for Halium, if the OP3 and OP3T can use the same software without much porting issues, then yes. [00:11] @PhoenixLandPirate, Is there an ETA for OP3 with Halium? [00:11] no ETAs sir [00:12] (Sticker, 512x489) https://irc.ubports.com/KJWf1aIQ/file_1197 [00:13] Thanks sir, I'm so curious to try UB, I tried with a porting on a MotoG 2014 but it doesn't boot 😒 [00:14] there is no UBports Halium build at all right now [00:14] the support for halium will come with UBports 16.04 [00:15] halium works with OP3, so you could install Plasma Mobile :D [00:15] not sure what the status is tho [00:15] ping @mariogrip for details [00:17] @vanyasem, Seriously?? It's so cool!! Great!! Thank you so much! [00:17] why is the bot doing all the talking? heh. some xmpp forwarding ? [00:25] Project daily-hammerhead build #351: SUCCESS in 11 min: http://ci.ubports.com/job/daily-hammerhead/351/ [00:26] jrg: It's a Telegram — IRC route [00:27] I'm not a bot, trust me [00:27] Project ota-push build #1165: SUCCESS in 1 min 53 sec: http://ci.ubports.com/job/ota-push/1165/ [01:15] heh [01:15] ok. well. thanks for the help. was hoping I could put ut on the nexus 7 2012 [01:19] Supported Devices: https://ubports.com/page/get-ubuntu-touch [01:20] currently only Nexus 7 2013 is supported by UBports [01:43] GermoVeltmaat was added by: GermoVeltmaat [01:43] @GermoVeltmaat, welcome [02:23] tgBot: but it isn’t heh [02:24] oops. meant vanyasem [02:24] vanyasem: if you go to the section for it. you’ll see that it says currently not supported. [07:01] Project click-import build #25: SUCCESS in 6.9 sec: http://ci.ubports.com/job/click-import/25/ [07:01] Project vivid-rootfs-armhf build #160: SUCCESS in 11 sec: http://ci.ubports.com/job/vivid-rootfs-armhf/160/ [07:01] Project ota-push build #1166: SUCCESS in 6.9 sec: http://ci.ubports.com/job/ota-push/1166/ [07:04] Sergey_Gerasimovich was added by: Sergey_Gerasimovich [07:42] @Sergey_Gerasimovich, welcome Сергей [07:52] Ребят, а есть сборки для Samsung s7 edge? [07:54] This chat is English only. [07:55] You can see the list of supported devices here: https://ubports.com/page/get-ubuntu-touch [07:55] and no, there is no support for Samsung S7 Edge. [07:56] Fwd from BrisPete: We'd love to support as many devices as possible. Unfortunately porting a new device takes a long time and there are only a few of us doing the work. More developers working on porting devices would mean more devices ported. This will particularly be true when the Halium Project is successful. [08:24] Project daily-fp2 build #369: SUCCESS in 14 min: http://ci.ubports.com/job/daily-fp2/369/ [08:25] Project ota-push build #1167: SUCCESS in 1 min 8 sec: http://ci.ubports.com/job/ota-push/1167/ [09:27] is posible use ubports in a virtualbox? [10:05] x86 is not supported atm, there is an old canonical emulator, but it's outdated and rarely works [10:10] ok, thanks [10:31] SnakeBzh was added by: SnakeBzh [10:36] @SnakeBzh, welcome [10:41] Thanks [11:00] Christopher Scharnagl was added by: Christopher Scharnagl [11:29] What will happen, whene we'll havr 1000 members? 🙊 [11:34] @Christopher Scharnagl, welcome [11:35] @kristijantkalec, @Flohack any ideas? :В [11:39] @kristijantkalec, Ubuntu Touch on iPhone X [11:39] #joke #dontKillMe [11:41] (Sticker, 512x512) https://irc.ubports.com/0LLs5TDa/file_1198 [11:45] I'm alive [11:45] lol [11:45] Gratz [11:45] :D [11:46] i was sick so i was afk 2 days [11:54] (Sticker, 512x340) https://irc.ubports.com/6500dk1I/file_1199 [11:56] @Xorpad get to work on @Halium quick :P [11:57] @iv [11:57] @vanyasem Already working [11:57] I got the system image to build [11:58] and hybris-boot image [11:58] but I haven't tested them [12:05] hrm, fastboot isn't working [12:07] @vanyasem, Wayne will make Ubuntu Newsdesk just in his underpants for a week or so =) [12:13] okay, hybris-boot boots [12:13] * Xorpad excited [12:15] real rootfs (ssh) or inird debugging (telnet) [12:15] ? [12:16] neither, when I boot hybris-boot I get MTP access to cetain partitions, showing that it's booted [12:17] I can like, see the boot and vendor partitions [12:17] and access them [12:17] have you read the documentation? [12:17] yes [12:18] ❌ Удалить счётчик [12:18] does `while : ; do lsusb -v 2>/dev/null | grep -Ee 'iSerial +[0-9]+ +[^ ]'; done | uniq` say somethin? [12:18] That's just the first thing I tried [12:18] let me see [12:18] you have to enter in on you host and reboot the device [12:19] if it says something like "running telnet on IP" it means it's running telnet [12:19] yeah, I haven't gotten to that step yet but I read it [12:19] yeah it's running telnet [12:19] let me telnet in [12:20] @Xorpad, neither... [12:20] liar-liar :D [12:20] ? [12:20] I got telnet shell [12:20] liar? [12:20] amazing, look for init.log and diagnosis.log [12:20] why liar? [12:21] @Xorpad, nvm, that was a joke. you told me it runs neither telnet, nor ssh, but later we discovered it does run telnet in fact [12:21] @vanyasem, then look carefully for errors and fix every single one of them [12:21] I just said i havdn't tested that far yet.. [12:21] and I can't use any commands lol [12:21] ls works [12:22] does cat work? [12:22] I haven't flashed anything, I sideload booted hybris-boot [12:22] yes cat works [12:22] Fwd from vanyasem: amazing, look for init.log and diagnosis.log [12:22] I found init.log [12:22] want the output? [12:22] amazing, pastebin it [12:23] but do it quick, I'm low on time :P [12:25] apparently I have no connection... [12:26] but i'm here [12:26] no connection to the internet? [12:26] or to your device? [12:26] oooo the phone was acting as a tethering device and old connections were alive but new ones were going through it [12:27] yep, telnet works as a routed network interface [12:27] my OS was smart enough not to set it as default :P (I use elementary OS) [12:27] i unplugged the phone and got to pastebin fine [12:27] https://pastebin.com/AmaYr5Za [12:28] my OS is ubuntu because I'm too lazy to configure gentoo latelt [12:28] ```+ mount -t devtmpfs devtmpfs /dev … mount: mounting devtmpfs on /dev failed: No such device … + mount /dev/mmcblk0p45 /data … mount: mounting /dev/mmcblk0p45 on /data failed: Invalid argument … + mount /data/rootfs.img /target … mount: mounting /data/rootfs.img on /target failed: No such file or directory … + mount --bind /data/ /target/data … mount: mounting /data/ on /target/data failed: Invalid argument``` [12:28] here are clues on what could get worng [12:29] of course, I haven't got it working, I got it to compile lol [12:29] it doesn't fail to boot which is a plus [12:29] @Xorpad, it does. [12:29] telnet means it couldn't boot and recovers in debugging mode [12:30] well, flashing the system.img might make a difference, but I'm sure there's lots of things I need to do before it's usable [12:31] this is just the first time i've gotten it to compile... I was trying to fix things in the wrong places [12:31] ideas: … 1) flash boot instead of sideloading (some devices have issues when sideloading) … 2) check whether fixup-mountpoints is correct (check docs) … 3) check fstab in device tree and correct partrition names (they should be same as in fixup-mountpoints) … 4) try formatting partritions … 5) do you have system.img and rootfs.img in your /data partrtion? if not, follow docs to make/push them [12:32] go through the checklist and ping me directly (@vanyasem) if you get any more questions [12:32] I don't have a rootfs yet [12:32] this was just my initial test to see if the kernel/boot partition were working [12:32] you can't test it without rootfs... [12:33] so please push rootfs.img (as it's clearly stated in docs) and don't be over-smart ;) [12:33] Well, I can't test the system, but I know the kernel boots now [12:33] yeah I'll do that, but as stated in the docs, I should test this first [12:33] @Xorpad, not necessary ;) [12:34] the docs said to try booting hybris-boot.img as step 1 in testing [12:34] use halium-install script to make one (or the new one by @JBBgameich: https://gist.github.com/JBBgameich/498c54686636a615aaf8ddfcbf9484d4) [12:35] (about rootfs) [12:35] good luck ;) [12:35] sure thanks:D [12:35] ping me if you have any issues, gtg [12:35] later @vanyasem [12:55] Project daily-mako build #144: SUCCESS in 12 min: http://ci.ubports.com/job/daily-mako/144/ [12:55] Project ota-push build #1168: SUCCESS in 0.59 sec: http://ci.ubports.com/job/ota-push/1168/ [13:17] Morning. Any news about weather scopes etc? [13:18] Any chances to resuscitate it? [13:29] te_online was added by: te_online [13:45] Hi @te_online you are welcome [14:33] ⏰ Показать мои счётчики [14:33] ❌ Удалить счётчик [14:37] Hey, [14:37] what's going on with blog posts "community updates"? [14:38] last one was number 12, and yesterday number 14 happend... [14:40] Derray was added by: Derray [15:14] @Flohack, already supports super groups? [15:15] @Xorpad, any news? [15:16] @vanyasem trying to make the rootfs script and live build system work with aarch64 [15:16] it doesn't play nice with aarch64 [15:18] @lebron36, work in progress [15:18] ;) [15:19] @TronFourtyTwo, 😉 [15:21] @kristijantkalec, 13 and 14 aren't up yet. [15:23] But it is planned, right? [15:23] Yes [15:34] I can help test applications or anything else [16:01] I think I have to mod live-build [16:02] it says (FIXME) aarch64 no supported yet [16:02] Are you sure the architecture is called aarch64 in debian? [16:03] Could you try arm64? [16:03] I guess iit called arm64, but I think i tried that... i'll try now just to be sure [16:06] I'm thinking of using something different than live-build ... maybe plain debootstrap is even better, as we don't use many of live-builds features at all. [16:07] that results in failures re: apt [16:07] Can you send a log? [16:07] sure [16:08] https://pastebin.com/yRTUbjKG [16:09] Which repo are you trying to build / change? [16:10] And are you building on ubuntu? [16:10] trying to build the halium ubuntu branch rootfs... the script works for armhf [16:10] yes on ubuntu [16:11] should i build on debian? [16:11] No, ubuntu is fine [16:11] ```cp: cannot stat 'customization/*': No such file or directory``` … The first error is this already [16:12] yeah, but it builds that itself when ARCH=armhf [16:12] the script works fine when ARCH=armhf [16:13] Wait, I'll try to reproduce that [16:14] i'm wondering if switching to a newer version of ubuntu might offer a package with aarch64 support [16:14] i'm on 16.04 [16:17] i feel like I would already be done if I was building this manually [16:18] (Photo, 1280x720) https://irc.ubports.com/SZ0ecLxH/file_1201.jpg [16:18] (Photo, 1280x720) https://irc.ubports.com/XgAjAvcZ/file_1203.jpg [16:18] (Photo, 1280x720) https://irc.ubports.com/T6Lxe4R1/file_1205.jpg [16:18] (Photo, 1280x720) https://irc.ubports.com/RR1MSGKu/file_1207.jpg [16:18] Geany and Inkscape on Ubuntu phone [16:19] finally using ubuntu ports as of today, before I was on an old image from back when Canonical still supported it [16:19] also having blast with Lazarus IDE: [16:19] (Photo, 1280x720) https://irc.ubports.com/4kII0pWG/file_1209.jpg [16:19] (Photo, 1280x720) https://irc.ubports.com/PN09ouc0/file_1211.jpg [16:19] (Photo, 1280x720) https://irc.ubports.com/QCKtYHNR/file_1213.jpg [16:19] (Photo, 1280x720) https://irc.ubports.com/ottmwkD0/file_1215.jpg [16:19] making apps on the phone itself [16:19] (Photo, 1280x720) https://irc.ubports.com/4yuzl820/file_1217.jpg [16:20] (Document) https://irc.ubports.com/Q1j2Rnc2/file_1218 [16:20] Kris Jace, wich Smartphone Modell is it? [16:20] @Montefrio, Meizu MX4 [16:22] wich Smartphone is this, Kris Jace? [16:22] Meizu MX4 [16:24]