 @jonny, No but IMHO it is useless to keep devices registered forever. If a user changes his devices because the old one got broken you can delete the token one day. Moreover our push server will get the notifications and throw them away since no device is registered for that token
 @Flohack, Makes sense
 Dark Theme Teaser!!!!
 (Photo, 720x1280) https://irc.ubports.com/WiXsZOSw.png
 (Photo, 720x1280) https://irc.ubports.com/QA9Wk15S.png
 (Photo, 720x1280) https://irc.ubports.com/vJsLQMaY.png
 @Flohack, 👍🏻👍🏻👍🏻👍🏻👍🏻
 @Flohack, Great!
 @Flohack, Beuty
 @Flohack, [Edit] Beauty
 Thanks a lot! All Credits go to @mymike00 !!!
 @milkor73, Thanks
 (Sticker, 512x512) https://irc.ubports.com/FawNDdXR.webp
 @dohbee, oh my
 @technicalbird, oh my that looks awesome
 might buy an meizu pro 5 tbh
 -just for that feature-
 @Fuseteam, That's Android
 (Photo, 720x1280) https://irc.ubports.com/wLB6v90c.png
 Stock 8.1. Nexus 5X
 @Flohack, I saw this but didn't see you saying it was a teaser so I looked in my settings then I looked in the OpenStore for an update lol … I can't wait!
[03:00] <ubptgbot> Aleksey_Peresvet was added by: Aleksey_Peresvet
[03:01] <ubptgbot> Ashdash was added by: Ashdash
 Hi, everybody. How about porting Ubuntu on phones with MTK processors? For example, I have a great xiaomi redmi note 4 mtk smartphone, would love to be able to install a Ubuntu on it, even if you need to pay a little bit.
[03:16] <ubptgbot> narenram was added by: narenram
 Ready to donate if available for Nokia 6
 Nokia 6 bootloader is still locked iirc so I don't think that's happening anytime soon.,.
 @Lyokanthrope, Oh!. thank you for the info.
[03:38] <ubptgbot> Khusyaini_Ahmad was added by: Khusyaini_Ahmad
[03:59] <ubptgbot> <Tygerpro Tygerpro> @Aleksey_Peresvet, I have been helping a person get a xioami port going, they have made some decent progress but its far from successful atm
 @Tygerpro Tygerpro, I see. well I will wait when it will be ported to any smartphone... I use Ubuntu on a laptop and I can say that it has one of the friendliest interfaces among other Linux distributions, so actually learning about the Ubuntu touch interested in the possibility of porting to a smartphone.
 @dohbee, not my android
 lol guess i didn't look close enough
 that said it was mentioned in one of the Q & A it should be possible but they didn't know a use for it
 GitHub - reactiflux/discord-irc: Connects Discord and IRC channels by sending messages back and forth. https://github.com/reactiflux/discord-irc -- shared by UC Mini
 @Fuseteam, i have now found this
 https://github.com/reactiflux/discord-irc
 im getting a "/bin/bash: /clang: No such file or directory" error... any thoughts?
 https://paste.ubuntu.com/p/q4bMv6FHP4/
[04:31] <ubptgbot> Yum was added by: Yum
 Hello
 I wonder if I could install Ubuntu  on my Samsung Galaxy S8
 Hello.I've run into the forward slash in a file path bug
 Hello,
 if you port it
 or you could use linux deploy
 but thats not ubuntu touch
[04:47] <ubptgbot> HIMANSHUKAGATHARA was added by: HIMANSHUKAGATHARA
 Hello.  I'm trying to load ubuntu onto a Nexus 5 from a Windows 7 Home Premium edition laptop.  I've run into  a bug.  Forward slash in the path/filename of a file to be pushed to phone.  It is thought to be fixed in a commit 3 days ago. If any developers are listening, is it maybe time for a new beta with this fix?  I can test and rep
[04:49] <ubptgbot> ort.  I haven't compiled from git before otherwise I could get it directly from git.
 Nick i just sent you a PM
 it doesn't do anything, stop clicking on it.
[07:15] <ubptgbot> tijesef was added by: tijesef
 HI
 I want to port Ubuntu Touch
 @tijesef, Hi, nice biography
 This is not funny.
 I want to port Ubuntu Touch, to Redmi 4X.
 https://github.com/bitrvmpd/msm-3.18 here is CAF kernel
 @tijesef, Start here: … t.me/halium
 There is a halium-7.1 branch
 Is it good?
[07:31] <ubptgbot> mrperfectjb was added by: mrperfectjb
 For porting UT, only the Halium port is required?
 @Flohack, Finally you censored your phone number 👮😝
 @tijesef, I think, … https://docs.ubports.com/en/latest/porting/introduction.html
 Does anyone know when the yesterday QA will never avaiable on soundcloud @wayneoutthere ?
 @HenryOne, No, this is just required to make it boot. Later on you will face a lot of issues with the hardware of the phone 😆
 @mymike00, Haha only for you :*
 @Aleksey_Peresvet, do you have kernel source code for it? Xiaomi has been violating GPL for their MTK phones from what I know.
 @jonny, indeed, that's just a test level i've made to test stuff
 Hi
[09:34] <ubptgbot> AdmDanila was added by: AdmDanila
[09:39] <ubptgbot> Admto was added by: Admto
 Hi
 Is there anybody from Russia?
 @Admto, Yep
 @Davilka, Привет
 Давай спишемся в личных сообщениях.
 Привет! Зачем?
 Please join the Russian language group then.
 @Flohack, Link please
 t.me/UBports_Ru
 @libremax, Thk
 @urielc, As I understand it, the Halium build is specific to the phone. Normally the release Android version?
 Hello Danila and Admto and Vandame and яникита and Himanshu and Yum and Khusyaini and Naren and Nick and Алексей. For more about UBports, check out … https://ubports.com/page/telegram-welcome
 @Stereofont, Good Morning Lionelb - I just thought I'd greet you because you're always greeting other people but rarely do you get any response! :/
 Thanks Mark 😃
 good morning lio working hard early i see :3
[10:53] <ubptgbot> chronosmsx was added by: chronosmsx
 @popescu_sorin, "YOU SHALL NOT PASS" - But I want to! 😡
 @chronosmsx, HI Michael, check out https://ubports.com/page/telegram-welcome to get you started
 (Photo, 720x1280) https://irc.ubports.com/P0ymZCfs.png
 You are attempting dual boot?
 it looks like he is tryna dual boot using multirom twrp
 'Stable' does not apply in that situation. Some people have managed to get Multirom to work for a while but it is not officially supported. A couple of people here may have some idea how to help
 im sorry i never tried multi rom, kinda buggy and space eater so i cant help
 try to read the instruction again
 anyway are you using one plus 3?
 its codename were bacon right?
 It is only ever a temporary fix that will keep collapsing and need to be rebuilt. UBports is not going to waste time and energy on it
 Oneplus One
 Bacon is OPO
 ok sorry, OPO is supported officialy? if im not mistaken it is
 OnePlusOne is officially supported but not in Multirom
 AFAIK the multirom dual boot is kinda same to windows where you have priority boot sorting
 Anbox will be officially supported, when it is ready for use
 I have a chance to install UT as a primary rom, but keep multirom?
 i think if its primary you should discard multirom as UT comes with its own recovery
 @chronosmsx, Theoretically, yes but not in any stable way. UT is not a ROM so it is like using multiple adapters
 UT does not use TWRP
 Where I can discover ut features? YouTube channel f e
 @chronosmsx, MKBHD, he got the major features
 I can only remember two or three people playing around with Multirom
 how i install ubports in oppo
 @chronosmsx, There is quite a nice one in German
 All are a bit old though
 @isak1234, I suggest you join Welcome & Install
 If I'll connect phone to monitor, I'll able to use PC features?
 Or with tweak tool and without monitor
 @chronosmsx, That is called convergence. Phone apps change appearance to a desktop mode when on a big scree. Yes that is possible but there are limitations.  Moving from 15.04 base to 16.04 will give a better platform for that
 @chronosmsx, [Edit] That is called convergence. Phone apps change appearance to a desktop mode when on a big screen. Yes that is possible but there are limitations.  Moving from 15.04 base to 16.04 will give a better platform for that
 Slimport devices are much better for that
 slimport is type c right?
 @chronosmsx, Libertine is probably what you are thinking of. That is more of a bridge to 'desktop' apps. Again, partly broken and work is needed to improve functioning
 https://en.m.wikipedia.org/wiki/SlimPort
 @mymike00, 'soon'
 multirom works fine on my Nexus 5, never experienced the boot loop...try reinstalling? and do you even install UBports or Canonical?
[11:46] <ubptgbot> NexusL was added by: NexusL
 @Javacookies, Ubports
 Reinstall doesn't take effect
 @NexusL, Hi, go to https://ubports.com/page/telegram-welcome to get you started
 Hi! I have a bq m10 fhd tablet with 16.04 ubports. It is a good idea to already  install the anbox or is it better to wait improvments?
 @Javacookies, If you both go to Lab you can discuss in detail there?
 @Jyoti, I have the same device as you and I have anbox installed. It isn't possible to do very much with it.
 I don't know if there is any advantages to not installing it though?
 Saving time is one I guess 😅
[12:25] <ubptgbot> <Tygerpro Tygerpro> @Aleksey_Peresvet, You can always try porting it yourself, it might test your patience but it won't test it any more than the annoying Co-Worker(s) that you try to avoid
 Thanks :-)
[12:28] <ubptgbot> Juanma was added by: Juanma
 @padraic7a, I asked because maybe later there will be a store to install the android apps and some configuration changes will be made and we must to undo the current installation and partitioning
 @Jyoti, if you want a store you'd have to install google play services and google play store, or f-droid, or some other store, yourself in anbox, i think
 @Juanma, Hi Juanma, take a look at https://ubports.com/page/telegram-welcome
[12:56] <ubptgbot> Liam was added by: Liam
 @Jyoti, Hey jyoti if you can install fdroid you can get around having to install Google play by using yalp store which you can install with fdroid, which allows you access to the play store without having to give your personal details away👍
 Does anyone here know if Ubuntu touch works with the new camera for the fairphone 2? Just found out that fairphone 2 is supported and so excited to try out Ubuntu touch on a phone at long last😁
 I think the new camera module was fixed in the last OTA, but I'm not 100% sure.
 @JBBgameich, Thanks mate, think I'll have a crack at installing in the next week.
 @Liam, Yes it works ;)
 @Flohack, Legend, thanks mate. So excited, after 12 years of using (k)Ubuntu I can finally get it on my phone🤪
 hehe
 @Liam, If you need any help, be sure to visit our Welcome & Install room!
 @Liam, i hope you're not expecting it to work like you're used to with (K)Ubuntu
 it is a phone, after all
 @dohbee, So true 😆
 People hear Linux/Ubuntu on a phone and the first reaction is, can I install OpenOffice 😆
 @wayneoutthere, 👍🏻
 @Flohack, My first thoughts were LibreOffice, VLC, Dropbox file sync (I use NC now though), Atom, and Firefox lol. Later on, I thought "Steam?" then dismissed it 😂
 lol
 @Flohack, Usually it's more "ooh, apt on a phone!!!111"
 i mean fine, you can use apt inside libertine, but doing it in the root is obviously bad
 also the irony of "ooh finally a secure linux phone!" that goes along with "yay i'll give root to everybody with apt!"
 @dohbee, 😆
 Install 500 ppas first
 "download this random deb, and install it with sudo dpkg -i"
 still safer, then download this random rom from xda :P
 @mariogrip, 😆 true
 First, you need to unlock and remove all protections from your phone, no warranty BUT this ROM hast increased 3D performance for your GAMES... I Read BUT GAMES 😆
 thats what matters
 @Flohack, Or do all that, but instead here's linux! ;)
 i mean, you can't fault xda for that first part, when we require the same thing, because that's just how phones work :(
 yeah, i wish phones was more like desktops there :/ also the blobs things is a big mess
 @mariogrip, i don't. that just means phones would be totally insecure by default, and they'd all have crazy UEFI BIOS interfaces designed for gamers
 yeah i  see that.
 i do wish there was a nice middle ground though, where we get the portability of PC stuff on phones, but the security of phone stuff on PCs
 yeah!
 i mean sure, i can set up bios passwords and junk, but then that's just another password i have to remember, which rarely ever gets used
 libreboot on phones would be awesome
 lol, can't even run libreboot on PCs really
 there's like 10 configurations total it actually works on
 yeah :/ that is a bummer though
 at least it's apparently possible to break the system on ryzen and run arbitrary code on the embedded ARM core, but then one has to break the system to do it
 would be nice to be able to actually use TrustZone for things
 @dohbee, I don't think it's possible to install anything at all at the moment, at least not in a straight forward way.
 Including fdroid in the anbox image in the future might get around that but I don't have a clue what is possible.
 Hi! Tried to install anbox on my bq m10 tablet with 16.04 and after running the command in terminal, the tablet stoped in fastboot mode...
 (Photo, 720x1280) https://irc.ubports.com/7jQxezCO.png
 @padraic7a, Jyoti: … Hi! Tried to install anbox on my bq m10 tablet with 16.04 and after running the command in terminal, the tablet stoped in fastboot mode...
 @Jyoti, Did you follow all steps exactly here: https://docs.ubports.com/en/latest/userguide/dailyuse/anbox.html
 @Flohack, Yes, i runned the command adb shell sudo reboot -f bootloader wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img sudo fastboot flash $PARTITIONNAME anbox-boot-$CODENAME.img sudo fastboot reboot rm anbox-boot-$CODENAME.img … And it stoped
 did you export the 2 variable names correctly?
 You will need the device codename and the name of your boot partition for the installation.
 I think you just wiped your boot partition. No panic, can be repaired
 did you export CODENAME="cooler OR frieza here" && export PARTITIONNAME="boot"
 At the first time, i runned the 2 varriable names without quotes,, after that i wrote again with guotes
 did you repace turbo and bootimg?
 [Edit] did you replace turbo and bootimg?
 Yes, with frieza and boot
 The commands are formatted a little confusingly. Run … ```adb shell sudo reboot -f bootloader ``` … Then on your laptop run … wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img …  sudo fastboot flash $PARTITIONNAME anbox-boot-$CODENAME.img  … sudo fastboot reboot rm anbox-boot-$CODENAME.img
 [Edit] The commands are formatted a little confusingly. Run … ```adb shell sudo reboot -f bootloader ``` … Then on your laptop run … ```wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img … ``` … Then … ``` sudo fastboot flash $PARTITIONNAME anbox-boot-$CODENAME.img ``` … Then … sudo fastboot reboot rm anbox-boot
[14:59] <ubptgbot> -$CODENAME.img
 It stoped at fastmode. Do i need to wait or switch off and reboot?
 Fast mode?
 Fastboot mode"
 That's not a command in the instructions though.
 @Flohack, You can install office and 'everything else' on a phone using Kali NetHunter … And there is a Debian App in the Playstore 🙈😜
 Was it suposed to write  … export CODENAME="frieza" && export PARTITIONNAME="boot" … With quotes, or  … Florian Leeber: … did you export CODENAME=frieza && export PARTITIONNAME=boot … without quotes?
 should be without probably
 anyway if not sure just replace the $CODE--- vairables with the right text
 In order to help you, you better make the whole procedure again, and please paste all inputs and outputs into a pastebin and send us the link
 We need to see the output of each step
 I tried the without and after that rewrote with quotes
 @Flohack, That's a good idea
 I will switch off and see if it reboots
 👍
 Rebooted, wrote the variables without quotes, runned the command in terminal an the tablet again stoped on fastboot mode
 well then sry, no idea.
 paste your output
 😆
 Ok, thanks anyway :-)
 maybe you own cooler and not frieza?
 jyoti@jyoti-M7X0SU:~$ adb shell sudo reboot -f bootloader … wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img … sudo fastboot flash $PARTITIONNAME anbox-boot-$CODENAME.img … sudo fastboot reboot … rm anbox-boot-$CODENAME.img[sudo] password for phablet:  … Sorry, try again. … [sudo] password for phablet
 do you write everything into one line?
 after that, i inroduced the phablet password and it stoped in fastboot mode
 i just copy/paste the commands
 thats not how it works 😆
 You have to split those lines up
 adb shell sudo reboot -f bootloader <ENTER> … wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img <ENTER> … sudo fastboot flash $PARTITIONNAME anbox-boot-$CODENAME.img <ENTER> … sudo fastboot reboot <ENTER> … rm anbox-boot-$CODENAME.img <ENTER>
 these are single commands, all need toe xectute smth before the next one can be suffessful
 ok... i will try 😊
 i thought that if you paste all the commnads, it will not exectute next command until the next one can be suffessful
 @Jyoti, Not if everything is on one line
 ok
 Unix/Linux needs line breaks 😆
 is better to try now write the variables with or without quotes?
 try without
 or is already not necessary, because i already wrote then before on the tablet terminal?
 @Jyoti, please enter set | grep CODENAME and paste the output
 a nice thing is that the tablet reloaded without problem and i can try again 😊
 😆
 You cannot easily break the BQ EXCEPT using the sp_flashtool
 (Photo, 1280x720) https://irc.ubports.com/3062qA8J.png
 why are you running those on the tablet?
 all those commands are to be run on your PC, while tablet is connected, with developer mode enabled
 i only wrote the last command on tablet, the other ones i runned on my PC with the tablet connected
 well you shouldn't have set CODENAME on the device, so it's expected to be unset there
 Runned on PC, the output was the same
 (Photo, 1280x720) https://irc.ubports.com/dYeOibLO.png
 @Jyoti, then it did not work, start againthere
 you need to keep the window open, shell variables will be removed again if xou close it
 Ok
 Did you read: … Warning … Because this feature is in such an early stage of development, the installation is only recommended for experienced users.
 :-)
 Ok i will be careful
 just to confirm: the command
 export CODENAME=frieza && export PARTITIONNAME=boot
 is supposed to write on tablet terminal, right?
[15:41] <ubptgbot> Linuxman1 was added by: Linuxman1
 jyoti@jyoti-M7X0SU:~$ adb shell sudo reboot -f bootloader … [sudo] password for phablet: XXXX … jyoti@jyoti-M7X0SU:~$ wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img … —2018-03-18 15:42:14—  http://cdimage.ubports.com/anbox-images/anbox-boot-.img … A resolver cdimage.ubports.com (cdimage.ubports.com)... 188.166.1
[15:43] <ubptgbot> 34.156 … A conectar cdimage.ubports.com (cdimage.ubports.com)|188.166.134.156|:80... conectado. … Pedido HTTP enviado, a aguardar resposta... 404 Not Found … 2018-03-18 15:42:14 ERRO 404: Not Found.
 You didn't replace the codename with your actual codename
 i replaced on tablet
 `wget http://cdimage.ubports.com/anbox-images/anbox-boot-$CODENAME.img` from your last post indicates you did not
 need i to wrote http://cdimage.ubports.com/anbox-images/anbox-boot-$frieza.img`?
 Without the dollar sign
 Replace `$CODENAME`
 ok.
 with your codename
 ok. but first, on tablet terminal i write export CODENAME="frieza" && export PARTITIONNAME="boot", yes?
 You could, but it's just going to be simpler to replace it yourself
 so, i do not need to write this command on tablet before?
 I don't think that it says anywhere to run any command on your device
 You run them all on your computer which you connect your device to
 "Install the 16.04/devel channel on your supported device … Open a terminal and run export CODENAME="turbo" && export PARTITIONNAME="bootimg", but replace the part between the quotes respectively with the codename and name of the boot partition for your device"
 Does it say to run that on your tablet
 and only after that the guide says to connect the tablet to PC
 Run all the commands on your PC.
 I'll fix the guide later
 ok. it will be easier 😊
 thanks
 i will try with quotes this time
 @UniversalSuperBox, yoti@jyoti-M7X0SU:~$ export CODENAME="frieza" && export PARTITIONNAME="boot" … jyoti@jyoti-M7X0SU:~$ adb shell sudo reboot -f bootloader … [sudo] password for phablet: XXXX … jyoti@jyoti-M7X0SU:~$ wget http://cdimage.ubports.com/anbox-images/anbox-boot-frieza.img … —2018-03-18 15:55:05—  http://cdimage.ubport
[15:57] <ubptgbot> s.com/anbox-images/anbox-boot-frieza.img … A resolver cdimage.ubports.com (cdimage.ubports.com)... 188.166.134.156 … A conectar cdimage.ubports.com (cdimage.ubports.com)|188.166.134.156|:80... conectado. … Pedido HTTP enviado, a aguardar resposta... 200 OK … Tamanho: 11579392 (11M) [application/octet-stream] … Saving to: ‘anbox-boot-frieza.img’ … a
[15:57] <ubptgbot> nbox-boot-frieza.i 100%[ Don't paste huge messages in the chat. Use paste.ubuntu.com
 ok. sorry i did not know how to do
 The error is `fastboot: command not found`, so I'd posture that you need to install fastboot.
 how to install fastboot?
 @UniversalSuperBox, yes, i tried agan without quotes in the variables and everything went fine till the "sudo: fastboot: command not found". But, i do not know how to install it
 apt install fastboot
 merci beaucoup, danke 😊
[16:19] <ubptgbot> dragonmaymar was added by: dragonmaymar
 (Photo, 1280x720) https://irc.ubports.com/Ex0uMmme.png
[16:32] <ubptgbot> arrayofinteger was added by: arrayofinteger
 Good evening
 I'm thinking about install ubports on my oneplus one (64GB) with mac os x
 In the installation process, is possible to lose my data (images, videos, files,...)?
 You will lose all data on Android, yes
 Hi Liam, @Linuxman1, @dragonmaymar and @arrayofinteger! Check this to get up to speed in this community and UT: https://ubports.com/page/telegram-welcome
 [Edit] Hi Liam, @Linuxman1, @dragonmaymar and @arrayofinteger! Check this to get up to speed in this community and with UT: https://ubports.com/page/telegram-welcome
 (Photo, 1280x720) https://irc.ubports.com/83bDMRw5.png Yes! I already have android apps on my bq m10 tablet!  :-)
 @dohbee, Okay, thank you so much!
 How are this builds, stables? I'm refering to battery life and performance comparing to android, for example, LOS14/15
 The stable build is stable. No idea about battery life on bacon compared to Android
 Only due to the very nice help of the telegram UBports Supergroup chanel people, i could install anbox on my tablet! Thank you very much
 Depends on what you use, mostly
 How do the android apps work?
[16:38] <lotuspsychje> anbox is comming soon?
 thank you, Florian, Padraic, Dalton, Rodney
 @wayneoutthere, Sorry 😐
 @dohbee, Okey, I'm going to try on the oneplus one
 It works with anbox: calendar, contacts, calculator
 The mac os link for oneplus one is down, any solution? https://github.com/ubports/ubports-installer/releases/download/0.1.9-beta/ubports-installer.0.1.9-beta.dmg
 I've found it
 hang on, let me draft a new release
 @Jyoti, 👍
 @UniversalSuperBox, Dalton, some tip sugestions to be added in the anbox installation guide: … A) All commands (including the first variables) must be written to the PC; … B) The quotation marks in the variable name are supposed to be keeped; … B) We must have fast boot installed (sudo apt nstall fastboot). … and,,, everything w
[16:58] <ubptgbot> ill run wonderfully!
 😊
 And one more thing: we must change the CODENAME and PARTITIONNAME in the command to put in the terminal
 with the addition of these simple suggestions, even people like me will be able to easily install anbox on ubports :-P
 do you know how to install FDROID or (GOOGLE PLAY 😄) on ubports tablet with anbox installed?
 really the quotes in the environment variable definitions are irrelevant, since there should be no space characters in the values used
 @Jyoti, I have used Anbox on Ubuntu desktop … You have to install the APK via adb
 adb install app.apk
 (Photo, 1280x719) https://irc.ubports.com/p6G0bD90.png Let's go!
 @unknown, so, it is the same system as we use if we want to instal on a PC withubuntu and anbox installed?
 i already installed in my PC with Lubuntu + anbox. so, the method is the same?
 @arrayofinteger, anyone knows how much time take it? the device is in fastboot mode right now
 @Jyoti, mostly yes.
 @arrayofinteger, Assuming no issues, it mostly depends on the download speeds you can get. Once everything is downloaded and copied to the device, it's still several minutes
 okay, thanks
 @Jyoti, Which chipset is that device
 @kutlay1653, BQ M10 FHD with UBports 16.04
 No I said CPU
 @kutlay1653, MTK
 which CPU is this device
 mt67xx?
 Or mt65xx?
 i don't recall which exactly
 @dohbee, ok thanks
 ddg will know
 @kutlay1653, https://store.bq.com/pt/aquaris-m10-fhd-ubuntu-negro
 @kutlay1653, CPU …         MediaTek Quad Core MT8163B até 1,3 GHz … RAM …         2 GB …   GPU …         MediaTek Mali-T720 MP2 até 600 MHz
 If we install fdroid on a UBports tablet with anbox, after that we can use fdroid to directly install android apps?
 @Jyoti, Yes - theoretically
 😊
 Jyoti Can you send a screenshot of a running app(anbox)?
 (Video, 23s) https://irc.ubports.com/D6WlJfDr.mp4
 @Jyoti, How is the performance of games?
 @unknown, I knew you would asked it!!!
 @Flohack, 😂👍
 @Jyoti, Thanks!
 @Flohack, But I think this is an interesting question... 🤕
 I have not tried to play android games yet
 @Jyoti, Thank you :-)
 @Jyoti, How well do apps play with the lifecycle and other security features? Like does the gallery app work at all for viewing images?
 @PhoenixLandPirate, Only calculator works, thats what all people show first 😆
 @Flohack, Fair :P
 @Flohack, 🤣🤣🤣👍👍
 @Flohack, That was exactly the thing I thought first - and the next thing was: "what about games?" 🙈🤪
 @unknown, 😂😂😂😂
 My tablet with anbox was almost without battery and is charging, so i only can test after that
 I think no many apps will work with anbox at the momment. We need to wait improvments
 @Flohack, doesn't whatsapp work?
 @dohbee, And this yes.
 It was a joke ROdney 😆
 well who cares if games work or not
 hehe
 (Document) https://irc.ubports.com/ZX4pOPP2.mp4
 why is that so tiny
 because i disabled the Expansion
 no, i mean the video
 or gif rather. it is very small
 it's a gif
 i can't even tell what you're talking about with drawn inverted and then rotated
 (Document) https://irc.ubports.com/zGj7x0pb.mp4
 ah, you probably changed something that caused the indicators panel icons section to get rotated
 yeah
 Hi everyone. I read on the blog this line: "Maurius recommends the Oneplus One or the Pro 5 as a device. Any core phones work pretty well."  What does this mean if I have bought an used nexus 5 to try Ubuntu Touch? This is a good purchase? And in the light of libertine not working in 15.04 and no report that it works on 16.04. And
[21:55] <ubptgbot> also anbox not supported for N5 currently? (Neither the one  plus one) sorry for long message.
 @Gabriele, Nexus 5 is dandy. … Anbox isn't supported on any device yet
 @neothethird, since you no-showed us, you now must go 3x speed - real time
 (Document) https://irc.ubports.com/6V0kRCjz.mp4
 @dohbee, actually I agree with this statement.  but I risk getting shot.
 eheh
 I agree with you
 I couldn't care less about games
 and I hope they use all the bullets in you so that I can escape
 I think what we're really saying is that there are much higher priorities at this stage in the game 😆
 yes, exactly.  The 'deal-breaker' apps we need righta way like @jonny cam-scanner app that he started
 Linphone (good progress)
 Next cloud integration (full)
 blah blah
 then, in celebration - GAMES!
 or... songs... HA
 My favorite game is Xenial updater. I play it every day.
 I thought it was Clickable?
 (Photo, 200x385) https://irc.ubports.com/5L6I0xJa.png
 Yeah! haha or that other one that sounds similar
 (Document) https://irc.ubports.com/VzMXe6gD.mp4