 Does anyone know if there is a way to import an ovpn file into the VPN configuration in the System Settings?
 (Voice, 1s) https://irc.ubports.com/7P3HfA5S.oga
[05:44] <ubptgbot> laolicool was added by: laolicool
 Where is the poring info
 Where is porting infomation
 @Yann Roth, Desktop: Right mouse button on the message. UT: slide message to the left (swipe)
 and then press the reply button 😆
 @laolicool, Here: https://docs.halium.org/en/latest/
 @Flohack, Thank you!
[06:37] <Frankfurt_Soup> Hi, anyone here?
[06:40] <Frankfurt_Soup> Just wondering if i can still try to install ubuntu-touch on a tablet even if its not officially supported?
[06:52] <ubptgbot> Eric O'Dell was added by: Eric O'Dell
 @Frankfurt_Soup, Short answer, no :)
 Long answer: UT runs Android below, so we need the specific Android kernel and device files ported to support UT
[06:54] <ubptgbot> <Eric O'Dell> Ahh ok :-) was hoping to put it on a lenovo tablet and maybe even my mate 9 phone
 Not so easy. Also only armhf can be ported currently, Lenovo is probably x86
[06:58] <ubptgbot> <Eric O'Dell> Thats the cpu?
[06:59] <ubptgbot> <Eric O'Dell> Apparently the tab has a qualcomm apq8009
 @Eric O'Dell, Is it armhf?
[07:59] <ubptgbot> <Eric O'Dell> Its an arm processor
[08:16] <ubptgbot> <Eric O'Dell> Im trying to run to installer on windows 10, i have downloaded and installed the ABD driver however whwn i run the installer it keepstelling me the drivers need to be installed
 @Eric O'Dell, You need the latest device driver using the wizard in Device Manager. While you ate there, clear out all previously used phone drivers
 @Eric O'Dell, [Edit] You need the latest device driver using the wizard in Device Manager. While you are there, clear out all previously used phone drivers
[08:34] <ubptgbot> <Eric O'Dell> Ok ill check thanks
[08:47] <ubptgbot> <Eric O'Dell> I cant seem to find any mobile or tablet drivers in my device manager unless im missing something lol
[08:51] <ubptgbot> <Eric O'Dell> Strange, windows doesnt even detect the tablet at all when i plug it in either
[08:53] <ubptgbot> <Eric O'Dell> Im just going to install ubuntu on my laptop and then try messing with UT later. Thanks for the help guys im sure ill be back asking questions again soon enough
 @Eric O'Dell, Tablet? ??
[09:20] <ubptgbot> <Eric O'Dell> Its a lenovo tab 2
 Don't try then. Nothing will happen
 Sorry, I misunderstood. You need a device which has Ubuntu Touch already ported
[09:33] <ubptgbot> <Eric O'Dell> That wouldnt stop the drivers from being detected by the installer though would it?
 The installer has a limited menu of error messages. They shouldn't be taken literally
 It is like trying to fill a petrol car with hydrogen
[09:46] <ubptgbot> <Eric O'Dell> Ok so is there some way i can get it ported for my device? I cant code or anything but im happy to test etc
 @AmolithSeregion, I want to now the same (i use Mullvad)
 @malditobastardo, If there isn't a way, the VPN setting is pretty useless?
 @Eric O'Dell, There might be a remote, theoretical possibility of a port but the chances of anyone wanting to commit to that are as close to 0% as can be. A couple of years work for a device by then really quite old
 The only serious tablet contenders are BQ M10 and BQ M10 FHD but you can scrape by with 2013 Nexus 7
[09:55] <ubptgbot> <Eric O'Dell> Ahh ok i had no idea a port for another device would take so long lol and yeah its already getting old
 @Eric O'Dell, It has a Mediatek processor, which is very closed proprietary. 1 Gb RAM is absolutely at the limits too
[10:04] <ubptgbot> <Eric O'Dell> The processor is a qualcomm from what lenovo tell me
[10:15] <ubptgbot> shooteram was added by: shooteram
 "Can I install on my XXX?/Can someone port to XXX?" is a frequently answered question: Apart from the improbable case where an existing port "just works" it takes a minimum of developer-months (the maximum is unbounded). … This is unexpected because most people have experience of PCs where the hardware is much more open, more
[10:15] <ubptgbot>  people work on maintaining drivers, and things "just work". (Which is an accident of history, this is not the result IBM and Microsoft cared about.) … There ought to be a clear explanation of the issues prominent on the website (or at least a link we can refer folks to).
 @alan_griffiths, Please somebody pin this to the group!! It answers lot of questions!
 👍
[10:36] <ubptgbot> <Eric O'Dell> What i took away from the website was that there are only 3 mobile phones and 1 tablet that are supported is that correct? Or am i not looking hard enough? I really should save projects like this for when im not dead tired and in pain from a toothache tho lol
 @Eric O'Dell, See this http://ubuntu-touch.io/devices
 yeepee my nexus 5 and nexus 5x in on its way, i will be experiencing ubuntu touch soon. excited.....
 Nexus 5 works but 5x don't
[10:41] <ubptgbot> <Eric O'Dell> Thanks for the link advocatux. I find it interesting that there are no samsung phones supported, are they too closed off?
 yeah but i think 5x work is in progress
 @Eric O'Dell, There's some work in progress in Halium, that's all I know
 thank you
 @Eric O'Dell, [Edit] You're welcome. There's some work in progress in Halium, that's all I know
 @leoaslan, Dalton told us in https://ubports.com/blog/ubports-blog-1/post/ubuntu-touch-q-a-24-97 … "Porting Nexus 5X, lot of weird issues. Port on hold for now due to huge time required"
 thank for this information
 You're welcome 👍
 but no problem at least with N5 i can enjoy ubuntu touch
 Yep, I have a N5 as a daily driver
 great
 how much free space will i get in 16gb N5
[10:49] <ubptgbot> <Eric O'Dell> I have a huawei mate 9 spare i was hoping to experiment on and i would have loved my lenovo tab to be ubuntu but i guess i will have to settle for ubuntu on my server and main laptop :-)
 @leoaslan, It depends on what you install, obviously. I don't know the free space after installing UBports only though
 @Eric O'Dell, Rather more than that but not a huge number
 @leoaslan, 5X is expected to be functioning at some time. Hopefully in 2018
 I'm having an issue with Dekko 2 (hammerhead; UT: stable, v3; Dekko 2 0.1.5; account: Outlook). Pressing the reply button or reply menu item for any received mail causes a segmentation fault. I already tried rebooting, uninstalling Dekko (v1), reinstalling. Is it already relevant to create a bug report now? Or should I try cle
[10:57] <ubptgbot> aring the app cache first (as an extension of the 'have you tried turning it off and on again' paradigm)?
 @Eric O'Dell, Which model is your lenovo tab?
[10:57] <ubptgbot> <Eric O'Dell> Tab 2
 Is that a thinkpad tablet?
 @Eric O'Dell, There has been work on some Samsung phones. I think we will see Neo 3 and Samsung Note 7 at some point
[10:59] <ubptgbot> <Eric O'Dell> The actual model number is TB3-X30F
 @Eric O'Dell, Hehe you are choosing all the wrong devices. HTC10 and OnePlusThree T are on the horizon
[11:00] <ubptgbot> <Eric O'Dell> As cool as it would be to have UT on my galaxy s8 i dont think i want to mess around with it that much lol
 @Stereofont, Yep, also Galaxy S8(+) and S4
[11:01] <ubptgbot> <Eric O'Dell> Lol i already owned these devices i didnt buy them to use for UT at all
[11:02] <ubptgbot> <Eric O'Dell> I refuse to own a HTC device after owning two of them and finding them to be pretty crap compared to the galaxies and even my old huawei mate 9
 All energies are focused on getting 16.04 stable. Everything else is on hold, porting included
[11:21] <ubptgbot> <Eric O'Dell> Thats fair enough
 @Stereofont, That's what it seems like. It's a feature I'm really missing right now lol.
 Can you send the file to settings from tge fiche manager?
 I forget if that's possible
 After nearly 2 years of using Ubuntu touch I have something to announce:
 I finally found emojis!!!!!  😋😎😉😐😉🙄😅🙄🐝🐙🐞🐸🐞🦁🐞🦁🐝🎍🐾🍂🌟🌘🍈🦌🍓🍐🍛🍥🌮🍱🍣🎱🏀🎱🥖🎱🎱🥕⛳🎗⛹
 Oh no
 Who the heck stuck them under language?  haha
 Don't work for me in stable OTA3 on N5
 What doesn't
 @wayneoutthere, It's a neo language after all
 No emojis even when activated under language...
 Not a big deal thought
[12:33] <ubptgbot> <Eric O'Dell> How do i stop all the notifications from this app?
 which app?
 on which platform i mean
[12:34] <ubptgbot> <Eric O'Dell> Telegram
[12:34] <ubptgbot> <Eric O'Dell> Android
[12:34] <ubptgbot> <Eric O'Dell> Lol disregard i found it
 👍
 @Eric O'Dell, We have a mole! Get him! 😃
[12:38] <ubptgbot> <Eric O'Dell> Lol sorry i dont get the reference :-)
[12:38] <ubptgbot> <Eric O'Dell> Oh i just realised there are proper emojis i dont need to use special characters
 @Gorsh2, lol
 @leoaslan, system is about 5Gb
 @dad_and_alive, first time i configured dekko2 i was having too many issues.. i cleared it all..reconfigured and now works quite good as i can expect.. i think that low connectivity can be a problem.
 @andreasimonetti, Thanks. I cleaned cache, data and config, and then re-installed again and recreated the account (with exact same settings) and now indeed it seems to work. I will hence not file a bug report.
 Dekkorigami
 @lduboeuf, It's a feature ...
 oops, typed here by mistake
 [Edit] oops, typed here by mistake :)
 @lduboeuf, It nevertheless seemed coherent with the ongoing conversation :-)
 @lduboeuf, I'm intrigued to know what this means now?😉
 @dad_and_alive, A bug report and log file would have been handy before wiping 😊 If it happens again it would be great if you could
 @DanChapman, Folding your e-mail into a duck?
 sorry can't help find the meaning :) this is a combination of Dekko and Kirigami and don't know how i did to write here
[14:54] <ubptgbot> Direktor_Enzo was added by: Direktor_Enzo
 hey guys. I have a problem with this Ubuntu Touch Installer.
 Firsst of all I installed the ADB drivers but there is always a note that I have to install them when I start the Ubuntu Installer. But when I type "adb devices" I get a line with my device.
 Also it wont install Ubuntu Touch, even if I reboot in fastboot mode.
 Any ideas for me????
 (OnePLus One)
 Ok, funfact: I only get my device listed, when I type "adb devices" while phone is in Cyanogen, but not when I am in fastboot. Could this be the problem`?
 Note: "fastboot devices" works in fastboot mode.
 @DanChapman, As both v1 and v2 had been installed together I feared to not be 'clean' enough for a decent bug report. That and the psychological hurdle of filing a first bug report. But next time I will try harder.
 @DanChapman, Not sure if useful as such, but I did copy the Dekko2 Logviewer logs to pastebin: http://paste.ubuntu.com/p/WcZt9mxHW9/ .
 @Direktor_Enzo, not a problem. fastboot does not have adb, and recovery/system do not have fastboot. you should be able to install just fine if the system is booted and you've got developer mode enabled and you can access the device with adb, though
 assuming the bootloader is unlocked
 bootloader is unlocked. But setup tell me to be in fastboot
 ok
 adb devices starts a daemon but when i retypte it it says "error: no devices/emulators found"
 yes, adb will not work if the phone is in fastboot
 fastboot devices is ok. All in fastboot mode
 oh, ok. but why doenst it work then? :(
 the installer? i don't know
 adb doesn't work because there is no adb in fastboot
 @Direktor_Enzo I flashed an OPO last week with the Ubuntu Installer, and I also had problems, but I was getting an error message telling "Adb failed to reboot!, reboot failed: -1". I solved it by first putting the device in fastboot mode, then starting the installer and choosing the device and channel manually.
 Is there an older version of the installer? I got the latest. Its a beta
 it is the bootloader only
 you are installing from Windows i guess?
 Yes, windows. I just try what @wagafo told me. Sec ...
 THE HECK!!!!!!! Now it works.
 Witchcraft
 ..... too soon. Device stuck in Recovery now. ^^
 @wagafo How was it by you? It say "Wating for device to enter recovery mode" and the deive IS in recovery mode now. I got many option like "install ubuntu zip" but there is no zip.
 For me it just started and did not stop, once I chose the device and channel and said (don't remember exactly) something like "start"), it continued by itself.
 [Edit] For me it just started and did not stop, once I chose the device and channel and said (don't remember exactly, something like "start"), it continued by itself.
 @Direktor_Enzo, is it twrp or the actual ubports recovery?
 it sounds like maybe it failed to flash the recovery
 Its Ubports recovery
 (Photo, 960x1280) https://irc.ubports.com/QCUwE8lf.png
 I did not have to do anything in the device. But I think you should be in fastboot mode, not in the recovery, but not very sure. I remember just a small line in the middle of the screen that said "fastboot mode" or something like that. Is is "adb fastboot" ?
 [Edit] I did not have to do anything in the device. But I think you should be in fastboot mode, not in the recovery, but not very sure. I remember just a small line in the middle of the screen that said "fastboot mode" or something like that. Is it "adb fastboot" ?
 OK, my case probably is different from yours, because I already had UT in the device. This was what I did: 1) adb shell 2) in the phablet: sudo reboot -f recovery, 3) start ubports-installer and choose the device manually, 4) install. It
 I give it a try.
 Ok, I dont get into Android anymore, so i cant to any adb things. I started from fastboot and the installer did what hes meant to do. BUt then it reboots into recovery and stuck in the screen shown above. Isnt there a flashable zip or anything?
 *swoops in*
 have you tried running the installer with sudo?
 I tryd with admin rights (Windows). Could it may work when i use kubuntu?
 ah windows. what version of kubuntu?
 The newest i guess.
 I downloaded it a week ago to test it. Dont know much about ubuntu systems on a pc
 But want to learn
 perhaps it's best to move this case to the Welcome and Install group which is meant for helping out with things like this, and has more people who may help.  https://t.me/WelcomePlus
 that said, for now the installer works best on ubuntu 16.04. if you wouldn't mind downloading an ISO and making a live USB stick, then we could continue in the live session.
 i have to be away from keyboard for a while (go home, eat, put kids to bed etc) if someone hasn't helped you by then, i'll be back in the Welcome group
 Ok i started it on Kubuntu. Now it seems to work. It downloads the os now.
 Ok now its done. Ubuntu Touch is installed. Who would ever think about need ubuntu to install ubuntu. Weird. ;)
 Thx for your support guys.
 Ha! Great! Congratulations and good luck woth your new OS on both your devices :-D
 @Direktor_Enzo, adb should work in the recovery. there is no zip, ubuntu touch is not an android rom
 @YougoChats thx. Actually i struggle with the tiny font in firefox. It wont get bigger. But thats nothing for this thread
 you should be able to change dpi in xresources inside libertine, i guess. but yeah firefox is still not going to be especially usable without an external display and kb/mouse
[17:00] <ubptgbot> Siva Reddy was added by: Siva Reddy
 @Siva Reddy, Hi Siva, check out https://ubports.com/page/telegram-welcome to get you started
 @dad_and_alive, That's great, thanks. So it died trying to detect an identity to use. I will look into it....
 @Direktor_Enzo, Firefox is not a good idea in Ubuntu Touch. Use OpenStore to install apps
 It was on normal Ubuntu, not Touch.
 Sry for the misunderstanding writing
 Do you have a hidpi screen?
 @Direktor_Enzo, Zoom in 😃
 Must be. But sry, i want to wrote Kubuntu. But now I change to Ubuntu. And I dont want to zoom, bc this would mess up the pic sites. Thx anyways, I install Ubuntu tomorrow. ^^
 Is it the websites or Firefox itself that has tiny font?
 You can set minimum font size …
 There was a button to force system font. After i set this the font was bigger. But even if I set a very high number it didnt go bigger than 12 or 10 or whatever this is. Anyways, I think it may be Kubuntu problem. Tomorrow I will see how it is with Ubuntu 17.
 Budgie, Elementary and Cinammon are all nice versions
[18:19] <ubptgbot> Roy Bruno was added by: Roy Bruno
[19:08] <ubptgbot> <demokrit atomos> Wow, the installation of 16.04 for testing purposes on the nexus 4 is ultra easy and well designed. Thanks and a big hurray to all who made this happen!! One question regarding the hardware functionality; should we allready report these on github or should we wait until the "base OS" is ironed out? (E.g. audio doesnt work bu
[19:08] <ubptgbot> t i dont want to spam the issues if currently focus is different...)
[19:38] <ubptgbot> <demokrit atomos> 😂i take it back, sound is working just not in any app...
[20:32] <ubptgbot> Hari Surayagari was added by: Hari Surayagari
 Hi Roy & Hari, check out https://ubports.com/page/telegram-welcome to get you started
[21:58] <ubptgbot> Eds_Mat was added by: Eds_Mat
 @Eds_Mat, Hi edson, take a look at https://ubports.com/page/telegram-welcome
[22:58] <ubptgbot> <Tygerpro Tygerpro> @Eric O'Dell, If you can install lineage, and your tablet is arm based, you can attempt a port, whether or not it works is a completely different can of worms though
[23:00] <ih8wndz> ordered a oneplus one 2day, can't wait to flash it
[23:02] <ubptgbot> <Eric O'Dell> @Tygerpro Tygerpro, Ok that sounds like some fun, i can just google lineage and go from there? I now have kubuntu on my main pc will that work ?
[23:33] <ubptgbot> <Tygerpro Tygerpro> I'd suggest seeing if there's a lineage repo first and foremost, if there is the halium website has a porting guide you can follow
[23:34] <ubptgbot> <Tygerpro Tygerpro> @Eric O'Dell, http://docs.halium.org/en/latest/porting/first-steps.html … Follow that if you find a lineage 14 repo for your device
 or 12.1