[01:38] <ubptgbot> willy_rumster was added by: willy_rumster
 @willy_rumster, Welcome, Willy! Check out ubports.com/telegram-welcome to get you started! If you have any questions, feel free to ask here or in our Welcome & Install channel (link on the webpage above)!
 @JPMMPJ, In the end it did not work out. The download of the Ubuntu Rom worked just fine as mentionned in your linked. But as a result, my tablet was completly black all the time. I had to reinstall the Android Rom (It worked).
 @UniversalSuperBox, In the end it did not work out. The download of the Ubuntu Rom worked just fine as mentionned in your linked. But as a result, my tablet was completly black all the time. I had to reinstall the Android Rom (It worked).
 Thank you anyway Dalton Durst
 @JPMMPJ, It wasn't a Fairphone?
 My OnePlus One phone worked just fine Lionelb
 My tablet BQ Aquaris M10 FHD Android version did not work
 I have been told that to make my tablet work with UBports Ubuntu installer, I have to get a BQ Aquaris M10 FHD Ubuntu Eddition...
 Thank you for asking Lionelb !
 (So no it wasn't a Fairphone)
 @JPMMPJ, Yes, you have to go via Canonical  UT
 Thank you for this confirmation Lionelb !
 I will do that ! Am gonna get the same tablet Canonical UT edition
 (I already sent back my Android tablet version to the seller for a refund... They understood that I want the UT edition... Nice...)
 @JPMMPJ, Was not really necessary but certainly that makes your task easier
 @Stereofont, I must confess that I already spent a lot of time trying to make it work... So yes I admit I chose the easiest way ... ☺️
[10:25] <ubptgbot> Ghost was added by: Ghost
 @Ghost, Hi Ghost, welcome. Check out https://ubports.com/page/telegram-welcome to get you started
 Pretty sure I've seen at least one ghost appear here before... Perhaps this is phantom?
 Ghosts come and go
 Good point
 lg nexus 5
 (Sticker, 512x512) https://irc.ubports.com/Ap0WGY2W.webp
 lol
[13:52] <ubptgbot> Evan He was added by: Evan He
 [Edit] Welcome Evan  !!! Check out https://ubports.com/page/telegram-welcome to get you started.
 Welcome Evan  !!! Check out https://ubports.com/page/telegram-welcome to get you started.
[13:57] <ubptgbot> <Evan He> Thanks. @Bolly
[13:57] <ubptgbot> <Evan He> :)
[14:09] <ubptgbot> <Evan He> Trying to install Ubuntu Touch on my Nexus 5 with UBports installer on a Windows 10 Pro (latest update) computer. The software wouldn't recognize my Nexus 5 (in its bootloader), and I am stuck at the "Please reboot to bootloader" screen. I have installed the Universal ADB driver, but the software always prop with "ADB drivers needed
[14:09] <ubptgbot> " on launch. Any advice?
[14:10] <ubptgbot> <Evan He> (Photo, 1180x890) https://irc.ubports.com/8FUqoDDo.png
 @Evan He, Come to https://t.me/WelcomePlus and we'll try to help you there
 That link is for the UB Welcome & Install group
[14:20] <ubptgbot> <Evan He> Thanks. :)
[14:37] <ubptgbot> Aukena was added by: Aukena
 @Aukena, Hi Christian, you can read https://ubports.com/page/telegram-welcome to learn about UBports
 3T?
 12A?
 checkmate
 On a related note http://ubuntu-touch.io/devices
 @Bolly, Ubfr team Head. I command you to invite this Bolly person in ;)
 @Flohack, My SIII has a broken LCD. I've heard they're a PITA to fix. … Honestly, it might cost less to buy a used S III/Note II than a display.
[17:05] <_Tag> hi dudes
[17:06] <_Tag> I just bougt a nexus 5 from a friend in order to install ubports
[17:06] <_Tag> right now i have installed 15.04 but I would love to try 16.04, but when I try to install it using the snap it just fails
[17:07] <_Tag> adb push error, thats the error
[17:07] <_Tag> I installed 15.04 using magic... whatever
[17:08] <_Tag> a script, in a mint 17, but from home, in an ubuntu 17.10 i can't, due phablet-tools not available
 at what screen is the phone when you get the error?
 not sure why phablet-tools would be needed
[17:10] <_Tag> mmm dohbee is me?
 You're using magic-device-tool?
 @_Tag, no i am not you :)
[17:11] <_Tag> oh, man, i thought it was ubptgbot who whas answering
[17:11] <_Tag> anyway, when it starts flashing, i get that error
 MDT is dropping support for Ubuntu Touch. You might have better luck with the installer snap or appimage. http://ubuntu-touch.io/install
[17:12] <_Tag> that's what i was trying, using that installer
[17:12] <_Tag> the orange one with the cute robot
 If nothing else, try running the appimage with sudo. Usually does the trick.
 Udev rules and adb craziness. Still quite a few things to work out.
[17:14] <_Tag> trying with sudo
[17:14] <_Tag> it's pushing
[17:14] <_Tag> and... done
[17:14] <_Tag>  man, this one was easy :)
 Great!
[17:15] <_Tag> let's see :) I really want to use it as my primary phone
[17:15] <_Tag> even when i know perhaps going for 16.04 is not the best idea :)
 Ideally we go without needing root access... Many distributions don't give us that luxury
 It almost 90% is not...
[17:16] <_Tag> do you mean i shout stick in 15?
 btw, you could just run `system-image-cli -vvvv --switch ubports-touch/16.04/devel` directly on the phone over adb/ssh
 if you want a daily phone with it, yes
[17:17] <_Tag> ah
[17:17] <_Tag> no prob, is there a way of using whatsapp? i tried LinqM but it failed
[17:17] <_Tag> old protocol it said
[17:17] <_Tag> I use both, telegram and whatsapp
 not yet, as whatsapp is proprietary and not available for general linux usage. if/when anbox support gets enabled on that device, it should be usable in anbox though
[17:19] <_Tag> well, it's ok :)
[17:43] <_Tag> re
[17:43] <_Tag> man, i'm trying to install now anbox
[17:43] <_Tag> but i can't figure out the partition name
[17:43] <_Tag> with bootimg it says "partition table doesn't exist"
 anbox is not supported on nexus 5 yet
[17:44] <_Tag> so I assume bootimg is not a valid partition table :)
[17:44] <_Tag> aaaah
 so you can't install it
[17:44] <_Tag> that's a good reason for not working
 (Sticker, 512x468) https://irc.ubports.com/T1WZEE2T.webp
[17:57] <_Tag> leaving
[17:57] <_Tag> thank you very much :)
[17:57] <_Tag> and cu soon
 cheers
 (Photo, 1280x960) https://irc.ubports.com/js4WC00D.png
 I missed this
 Comfy
 Looks cоmfy
 @willy_rumster, I like your username
 i was going to say the same thing.  2018 award for Most Funky TG Username goes to.... whatever this says
 @PhoenixLandPirate, it's a https://en.m.wikipedia.org/wiki/Combining_Diacritical_Marks … i glad to see your likes)
 @willy_rumster, wow, they're cool! I think I'm going tho change my username soon... 😁
[19:40] <ubptgbot> CrayCrayCobra was added by: CrayCrayCobra
 Hello,
 Hello,  … I try to install Ubutu touch on a Oneplus One and I get this message:
 (Photo, 592x314) https://irc.ubports.com/CTPlTKC4.png
 @CrayCrayCobra, Hi BEnjAMIN, check out https://ubports.com/page/telegram-welcome to get you started
 Newcomers Room
 there you might find help
 Thanx
[19:51] <jaydemir> is there an iso for ubuntu touch on x86 yet?
[19:52] <jaydemir> I found some targz files but I cant boot into it. I've copied the files onto a drive and also tried rolling them into an iso and flashing to a USB that way
 no, there's no iso for ubuntu with unity8 yet
 the rootfs tarball is not a bootable system. it doesn't contain bootloader or kernel.
[19:53] <jaydemir> so there's no way I can get ubuntu touch on my x86 tablet?
 no. you can install ubuntu 16.04, and then install the ubports unity8 on top of it
[19:55] <jaydemir> whats the package called?
[19:56] <jaydemir> and would I change to that like I would any other DE from the login screen?
 it's not a package in ubuntu archives. you have to follow the "try ubports unity8 on ubuntu 16.04" instructions to install it
[19:56] <jaydemir> got you
 yes, unity8 is just another shell
[19:57] <jaydemir> fair enough. Still itching to try it but I dont have a nexus device. The LG G2 is basically a nexus 5 on steroids so I'll give that a shot
 lg g2?
 it is not a currently supported device
[20:01] <jaydemir> all good
[20:01] <jaydemir> tricked the installer into doing a flash
[20:01] <jaydemir> I have another G2 if anything
 Hi folks, I've just learned that other models have tethering enabled (i.e. "access point" option). But my N4 with 15.04 doesn't... Any reason for that?
 it was disabled on mako explicitly, as it was causing some problems. nobody ever resolved the issues. i don't recall what the issues were specifically
 as in it was disabled on mako explicitly, back in the canonical days
 Oh... I always thought no UT had it
 IS there any way to re-enable it?
 find the code that disables it, and make a patch to change it
 Thanks, will check
[20:41] <jaydemir> Is it hard to put Ubuntu touch on an unsupported device?
 assuming all the underlying requirements are met, it's generally more tedious than difficult
[20:45] <jaydemir> Ah. There a list of these requirements?
 i think the porting guide states all the requirements
 (i do not recall the url for it, but it's somehere on ubports.com)
[20:46] <jaydemir> Got you.
 jaydemir see this https://docs.ubports.com/en/latest/porting/introduction.html