/srv/irclogs.ubuntu.com/2018/07/15/#ubports.txt

ubptgbotB W was added by: B W00:41
ubptgbot<B W> Howdy. I've been trying to customize the Nexus 5 kernel options. I'm able to make the kernel zImage-dtb and subsequent boot.img but cannot get it to boot, it hangs on the google logo.00:43
ubptgbot<B W> There's nothing unusual in /proc/last_kmesg suggesting what's wrong00:43
ubptgbot<B W> anyone seen this before or able to offer some insight?00:43
ubptgbot<UniversalSuperBox> What initramfs are you building into the image00:44
ubptgbot<B W> I pulled the one from boot-hammerhead.img00:44
ubptgbot<B W> as well as trying the one extracted from the boot partition of the device00:44
ubptgbot<B W> (unmodified touch is installed and running)00:45
ubptgbot<dohbee> you are building the correct kernel source with all the ubuntu patches, and apparmor, and not disabling anything that was already enabled, yes?00:45
ubptgbot<UniversalSuperBox> Right, you'll need to start from ubports/android_kernel_lge_hammerhead00:45
ubptgbot<B W> Yes, that's the one I have checked out00:45
ubptgbot<UniversalSuperBox> And you're building it in the Android tree, not trying to make it externally?00:46
ubptgbot<UniversalSuperBox> While I agree that downloading the whole thing is a waste of resources, it's better to not poke the bear.00:47
ubptgbot<B W> I've been following the same steps I used successfully for the stock hammerhead kernel from google00:48
ubptgbot<UniversalSuperBox> So... no?00:48
ubptgbot<B W> If by "android tree" you mean the steps involving " phablet-dev-bootstrap phablet", then no00:49
ubptgbot<B W> I get 503s trying to visit  phablet-dev-bootstrap phablet00:49
ubptgbot<B W> err00:49
ubptgbot<B W> https://code-review.phablet.ubuntu.com/00:49
ubptgbot<UniversalSuperBox> Well that's to be expected, the service is down00:49
ubptgbot<UniversalSuperBox> It went down on the 2nd, the repositories are rehosted at https://github.com/ubports-android/00:49
ubptgbot<B W> ah. so I need to wait for it to come back up?00:50
ubptgbot<UniversalSuperBox> No maintained documentation uses `phablet-dev-bootstrap`00:50
ubptgbot<UniversalSuperBox> But00:50
ubptgbot<UniversalSuperBox> No maintained documentation details setting up the ubp-5.1 tree either00:50
ubptgbot<UniversalSuperBox> so00:50
ubptgbot<UniversalSuperBox> You'll want to `repo init` using https://github.com/ubports/android00:51
ubptgbot<dohbee> something something transitional phase something00:51
ubptgbot<UniversalSuperBox> Then, use the manifest fragments in https://github.com/ubports/devices to create a local manifest for your chosen device00:52
ubptgbot<UniversalSuperBox> If you're trying to build a custom kernel, I'd encourage you to contribute any fixes back into our hammerhead kernel00:52
ubptgbot<B W> my "customization" quite literally consists of enabling MIDI sequencer support00:53
ubptgbot<B W> i.e. CONFIG_SND_SEQUENCER=y … CONFIG_SND_SEQUENCER_OSS=y … CONFIG_SND_RAWMIDI_SEQ=y00:53
ubptgbot<UniversalSuperBox> Here, I think I have the tree locally. I'll build a bootimage with those.00:53
ubptgbot<dohbee> what does that even do for hammerhead though?00:54
ubptgbot<B W> creates /dev/snd/seq[uencer]00:54
ubptgbot<UniversalSuperBox> That's available on 3.4, right?00:54
ubptgbot<B W> yes00:55
ubptgbot<B W> I had it on stock hammerhead but had other issues getting audio out from chroot00:55
ubptgbot<dohbee> it actually has midi seq in the hardware?00:55
ubptgbot<dohbee> wow00:55
ubptgbot<UniversalSuperBox> Android gadgets are wonderful00:56
ubptgbot<UniversalSuperBox> (Photo, 1015x839) https://irc.ubports.com/1hcbmqF8.png here we go00:56
ubptgbot<B W> It may not, I think that just exposes the ALSA sequencer dev node00:56
ubptgbot<B W> For the curious I'm attempting to turn my disused Nexus 5 into a substitute MT-32 with munt00:56
ubptgbot<UniversalSuperBox> If it works you need to make a blog post about it!00:57
ubptgbot<B W> which needs the /dev/snd/seq devices purely for midi routing00:57
ubptgbot<B W> It's been done in chroot before00:57
ubptgbot<B W> https://forum.xda-developers.com/g4-play/development/tool-emulate-roland-mt-32-using-munt-t377445700:57
ubptgbot<B W> alas chroot has audio out issues on N500:58
ubptgbot<dohbee> huh00:58
ubptgbot<B W> spent the better part of several days beating my head against that issue00:58
ubptgbot<B W> and since android supports USB MIDI devices, a cheap USB midi adapter in your OTG port and you have a fake MT3200:58
ubptgbot<UniversalSuperBox> Normal warnings about trusting random binaries on the internet, blah blah blah00:59
ubptgbot<UniversalSuperBox> (Document) https://irc.ubports.com/J8uO0Tp0.7z00:59
ubptgbot<B W> πŸ‘00:59
ubptgbot<B W> will give it a stab right now00:59
ubptgbot<UniversalSuperBox> Oh, right01:01
ubptgbot<UniversalSuperBox> ``` sha512sum boot.7z  β€¦ d52b25ba718e04cd6b7aefc3a2522cfd12753d11ab11662664b4c3aa87b047aafd7177d2ba43eb17991d230da9f3b2920701432f259311bd74d5bb613daae375  boot.7z```01:01
ubptgbot<UniversalSuperBox> [Edit] $``` sha512sum boot.7z  β€¦ d52b25ba718e04cd6b7aefc3a2522cfd12753d11ab11662664b4c3aa87b047aafd7177d2ba43eb17991d230da9f3b2920701432f259311bd74d5bb613daae375  boot.7z```01:01
ubptgbot<UniversalSuperBox> editing goes worse01:01
ubptgbot<B W> drat, must be missing something in the config01:03
ubptgbot<UniversalSuperBox> So it booted?01:04
ubptgbot<B W> by-path    pcmC0D11c  pcmC0D14p  pcmC0D19c  pcmC0D22c  pcmC0D3c  pcmC0D7p … comprC0D9  pcmC0D11p  pcmC0D15c  pcmC0D19p  pcmC0D22p  pcmC0D3p  pcmC0D8c … controlC0  pcmC0D12c  pcmC0D15p  pcmC0D1c   pcmC0D23c  pcmC0D4p  timer … pcmC0D0c   pcmC0D12p  pcmC0D16c  pcmC0D1p   pcmC0D24p  pcmC0D5c … pcmC0D0p   pcmC0D13c  pcmC0D17c  pcmC0D20p  pcm01:04
ubptgbotC0D25c  pcmC0D5p … pcmC0D10c  pcmC0D13p  pcmC0D17p  pcmC0D21c  pcmC0D2c   pcmC0D6c … pcmC0D10p  pcmC0D14c  pcmC0D18p  pcmC0D21p  pcmC0D2p   pcmC0D6p01:04
ubptgbot<B W> aye, it booted01:04
ubptgbot<UniversalSuperBox> Ooh, careful about large pastes01:04
ubptgbot<UniversalSuperBox> Makes IRC users unhappy01:04
ubptgbot<B W> heh, sorry01:04
ubptgbot<B W> and it does seem to be the correct kernel01:04
ubptgbot<B W> Linux version 3.4.0-cyanogenmod-g2669fa0-dirty (root@dalton-ryzen) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed Jun 20 19:39:53 UTC 201801:04
ubptgbot<PhoenixLandPirate> I thought IRC was better with large pastes then telegram?01:04
ubptgbot<UniversalSuperBox> Wed jun 2001:05
ubptgbot<UniversalSuperBox> Hm01:05
ubptgbot<UniversalSuperBox> I'll do a clean rebuild01:05
ubptgbot<B W> hang on, let me double check my config as well vs the AOSP hammerhead01:05
ubptgbot<dohbee> @PhoenixLandPirate, yeah no01:05
ubptgbot<dohbee> pastebin is great with large pastes though01:05
ubptgbot<Gorsh2> Hi people! Quick question: is there any workaround on Dekko2 to make it work with my Yahoo account?01:06
ubptgbot<Gorsh2> Or any configuration that I'm missing?01:06
ubptgbot<PhoenixLandPirate> @dohbee, This is true01:08
ubptgbot<PhoenixLandPirate> @dohbee, Ive used irc less than Ive used Bing.01:08
ubptgbot<UniversalSuperBox> (Document) https://irc.ubports.com/0pB64u0M.7z01:08
ubptgbot<UniversalSuperBox> There, clean rebuild01:09
ubptgbot<UniversalSuperBox> #BlameAndroidBuildSystem01:09
ubptgbot<B W> Thanks01:09
ubptgbot<B W> if that doesn't work I think it might mean I need to do some ALSA tinkering/configuring01:10
ubptgbot<B W> hmm01:14
ubptgbot<B W> looks like the config changes did not apply01:14
ubptgbot<B W> # CONFIG_SND_SEQUENCER is not set01:15
ubptgbot<B W> pulled from /proc/config.gz01:15
ubptgbot<B W> # CONFIG_SND_RAWMIDI_SEQ is not set01:15
ubptgbot<B W> ^^ Looked at your build screenshot above... did you miss make hammerhead_defconfig after editing? ;)01:17
ubptgbot<UniversalSuperBox> No actually, that should be done automatically by the build system01:18
ubptgbot<UniversalSuperBox> I'll try without ccache, I guess01:20
ubptgbot<B W> fair enough; I'm only familiar with my own environment so I'm not qualified to comment on your setup 😊01:20
ubptgbot<UniversalSuperBox> Well if you were, I'd start with "Hey, this kernel is built as root" Β―\_(ツ)_/Β―01:22
ubptgbot<B W> heh, I can see that from dmesg | head01:23
ubptgbot<B W> part of me wants to learn more about android development because I have several phones which are no longer in service but still perfectly useable as miniature computers for odd tasks.01:25
ubptgbot<B W> but when you do software development as a day job... the motivation to do more dev at home in your spare time kinda goes away.01:26
ubptgbot<UniversalSuperBox> Yep, I edited the wrong config01:26
ubptgbot<UniversalSuperBox> the folder has `cyanogenmod_hammerhead_defconfig` and `hammerhead_defconfig`01:27
ubptgbot<UniversalSuperBox> only one is correct01:27
ubptgbot<B W> heh01:29
ubptgbot<B W> the number of times I wasn't editing what I *thought* I was editing... happens to the best of us01:29
ubptgbot<UniversalSuperBox> (Document) https://irc.ubports.com/R1mUTTHs.7z01:30
ubptgbot<UniversalSuperBox> There. Checked the `.config` this time.01:30
ubptgbot<B W> bam01:32
ubptgbot<B W> ls /dev/snd/seq  β€¦ /dev/snd/seq01:32
ubptgbot<B W> there it is01:32
ubptgbot<UniversalSuperBox> All you gotta do is do the right thing. :P01:33
ubptgbot<B W> πŸ˜‰01:33
ubptgbot<B W> moment of truth01:35
ubptgbot<B W> I HEAR MIDI01:35
ubptgbot<B W> *high5*01:36
ubptgbot<UniversalSuperBox> Oh man. Do you have the sad midi saxophone yet?01:36
ubptgbot<B W> well... I have this01:37
ubptgbot<B W> https://www.youtube.com/watch?v=OIW4F285QjA01:37
ubptgbot<B W> somehow it sounds better on a fake MT3201:38
ubptgbot<UniversalSuperBox> Glad to be of service01:40
ubptgbot<B W> Now I just need to fix up the munt GUI to run on touch :)01:40
ubptgbot<B W> and very much appreciated! you've probably saved me 15GB of bandwidth and probably several hours of cursing01:42
ubptgbot<B W> I'll have to order a second MIDI cable now to get it setup with my desktop and the N5 as the synth01:43
ubptgbot<B W> I'm making a note to make a little video and come back here and share once I have it all figured out01:44
ubptgbot<UniversalSuperBox> Yay!01:44
ubptgbot<B W> and my N5 gets a second life other than dust collector01:45
ubptgbot<B W> Thank you very much again... bedtime for me but now I have something else to look forward to doing tomorrow 😊01:51
ubptgbot<UniversalSuperBox> No problem01:51
ubptgbotAlbus Dumbledore was added by: Albus Dumbledore03:34
ubptgbot<Albus Dumbledore> Hello there, I have a question does Ubuntu Touch support dual sim feature?03:35
ubptgbotmr_imanx was added by: mr_imanx03:42
ubptgbot<PhoenixLandPirate> Yes04:06
ubptgbot<cls006> Is WINE (www.winehq.org) included in UBports apps?04:11
ubptgbot<ar7ch> @cls006, what do you expect from wine on arm architecture?04:17
ubptgbot<amolith> No it is not04:17
ubptgbot<amolith> @ar7ch, ++04:17
ubptgbot<cls006> @ar7ch, There are WINE apks for Android.04:23
ubptgbot<ar7ch> @cls006, of course, but they are for x86-based devices, arm devices only support windows RT which is... meh04:26
ubptgbot<cls006> @ar7ch, To run Windows apps on UBports.  πŸ˜‰ … Or use WINE + QEMU to run x86 Windows apps.04:27
ubptgbot<ar7ch> @ar7ch, well RT was deprecated a long time ago and there are definetly much better alternatives for its apps04:29
ubptgbot<ar7ch> @cls006, are you sure that qemu will give you performance level you need?04:30
ubptgbot<ar7ch> your SoC probably doesn't support hardware virtualization like x86 cpus, moreover, very possible that qemu wouldn't start because of Halium hacks and android kernel04:54
ubptgbot<John_athan> @vanyasem, How much u did05:30
ubptgbot<John_athan> @amolith, I am not able load it , pls reload or upload as video05:31
ubptgbot<amolith> @John_athan, It's just an MP4. I'll upload it again and see if it makes a difference.05:33
ubptgbot<amolith> @vanyasem, What?05:34
ubptgbot<amolith> (Document) https://irc.ubports.com/z6TBLvfe.mp405:35
ubptgbot<amolith> Apparently it's so small that Telegram converts it to a GIF05:35
ubptgbot<vanyasem> Could you please stop pinging me for no reason ^.^05:35
ubptgbot<vanyasem> Thank you05:35
ubptgbot<amolith> @vanyasem, I didn't know if you were replying to what I sent or not05:36
ubptgbot<John_athan> @vanyasem, Same here05:36
ubptgbot<amolith> Ok . . .05:36
ubptgbot<ar7ch> @amolith, telegram converts video with sound turned off to gif05:49
ubptgbot<ar7ch> I can't view your file anyway05:55
ubptgbot<amolith> Not sure why. It opens in VLC just fine.05:59
ubptgbot<amolith> I might put it on my YT channel. It's a screen recording of Ubuntu Touch.06:00
ubptgbot<John_athan> @amolith, Any thing new in that video, any new features?06:25
ubptgbot<Lyokanthrope> I think it's literally just a test recording06:33
ubptgbotthre4dinf0 was added by: thre4dinf008:15
ubptgbot<thre4dinf0> Hello everyone :)08:15
ubptgbot<thre4dinf0> Thought I'd join here, because I hit an issue trying to install Ubuntu Touch on my Nexus 4, and I haven't seen any solution online08:16
ubptgbot<thre4dinf0> I am running the latest UBPorts installer, and it doesn't seem to be able to detect the phone in fastboot mode, even though I've verified that the driver is installed and I can see the device with "fastboot devices"08:17
ubptgbot<thre4dinf0> Is there any known solution for this, or a way to manually install it?08:17
ubptgbot<Bolly> To all the new people here, welcome! Check out https://ubports.com/page/telegram-welcome to get your UT journey started08:34
ubptgbot<anpok> @thre4dinf0 is the device listed via fastboot devices?09:01
ubptgbot<anpok> you wrote that.09:01
ubptgbot<anpok> how about manually selecting the device?09:01
ubptgbot<thre4dinf0> That's what I'm doing09:05
ubptgbot<thre4dinf0> I've found some others online that basically said that the Windows version is plainly broken, so that's probably the issue09:05
ubptgbot<anpok> ohh09:06
ubptgbot<geotechland> @thre4dinf0 try using ubports installer 0.1.709:15
ubptgbot<geotechland> That worked for me for some reason09:15
ubptgbot<advocatux> @thre4dinf0 the latest version for windows should work https://github.com/ubports/ubports-installer/releases/download/0.1.20-beta/ubports-installer.0.1.20-beta.exe09:18
ubptgbot<advocatux> If that fails, the usual backup plan is to use 0.1.9-beta09:18
ubptgbot<advocatux> Also I've seen a lot of installations fail due to a bad usb cable09:19
ubptgbot<advocatux> [Edit] Also I've seen a lot of installations failing due to a bad usb cable09:19
ubptgbot<geotechland> https://github.com/ubports/ubports-installer/releases?after=0.1.11-beta09:20
ubptgbot<geotechland> Yeah i had issues using the latest version at one point and tried 0.1.9 and that didnt work either. But 0.1.7 did09:21
ubptgbotdgreen was added by: dgreen09:37
ubptgbot<thre4dinf0> @advocatux, Been using that one09:37
ubptgbot<thre4dinf0> @advocatux, I'll give it a try09:38
ubptgbot<John_athan> @Lyokanthrope, R u trying adb method or mir method09:38
ubptgbot<advocatux> @thre4dinf0, πŸ‘09:38
ubptgbot<thre4dinf0> @geotechland, 0.1.9 doesn't work either, I'll try 0.1.7 next09:40
ubptgbot<advocatux> @thre4dinf0, Can you try to run it as admin?09:42
ubptgbot<thre4dinf0> @advocatux, I already tried that with the latest release, but sure, I'll give it another try09:43
ubptgbot<advocatux> Can you try with another usb cable and/or another usb port?09:43
ubptgbot<thre4dinf0> I'll try it on another PC later, yeah. I'd be surprised if that was the issue though, since I've not had any issues with this PC/Cable/Port before09:44
ubptgbot<thre4dinf0> Thanks for the help though, I'll get back to you if I still can't get it working later09:44
ubptgbot<thre4dinf0> Or, I could try a Linux VM I guess, since the installer works better on there from what I've read online09:45
ubptgbot<advocatux> Okay, but it's better to continue in the Install group https://t.me/WelcomePlus ;)09:45
ubptgbot<thre4dinf0> Oh, I'm so sorry, I thought this was the right group O.o09:45
ubptgbot<advocatux> No problem :)09:46
ubptgbot<thre4dinf0> Thanks :)09:46
ubptgbot<advocatux> you're welcome :)09:46
ubptgbot<Flohack> @thre4dinf0, Hmm you are using very old versions, in general the .1.20 should work now also in windows09:51
ubptgbotalexey70 was added by: alexey7011:36
ubptgbot<alexey70> Hello everyone11:37
ubptgbot<alexey70> I want Ubuntu bionic on one of my phone is this possible?11:37
ubptgbot<JBBgameich> Currently Xenial is the latest supported release, so not really.11:38
ubptgbot<alexey70> And it'll be based on?11:38
ubptgbot<alexey70> My device codename mido11:41
ubptgbot<Loveisblurred> @JBBgameich, Mine phone is xioami too. But I am in Android. I want to install Ubuntu in my xiaomi11:42
ubptgbot<JBBgameich> @alexey70, This device is also not supported by Ubuntu Touch, but someone started a Halium port for it (https://github.com/Halium/projectmanagement/issues/71) which means with some additional work you could port Ubuntu Touch to it.11:43
ubptgbot<alexey70> @Loveisblurred, Albus Wolfric Percival brain Dumbledore11:45
ubptgbot<alexey70> @Loveisblurred, [Edit] Albus Percival wolfric brain Dumbledore11:46
ubptgbot<Loveisblurred> @alexey70, Thanks Man.11:48
ubptgbot<dohbee> o_O12:08
ubptgbot<UniversalSuperBox> @alexey70, Er... What?13:11
ubptgbot<dohbee> er muggles or something13:11
ubptgbot<Loveisblurred> It's dumbledors full name13:11
ubptgbot<Loveisblurred> Potterhead.13:13
ubptgbot<Loveisblurred> Sorry13:13
ubptgbot<Loveisblurred> Are you shirius.13:13
ubptgbot<amolith> @John_athan, No just demonstrating how it works.13:44
ubptgbot<advocatux> @Loveisblurred please, keep your posts on topic in this group or go to OT (https://t.me/ubports_ot). Thank you14:28
ubptgbot<mattbel10> Camera seems not working anymore on pro5 UT 16.04 devel: it keeps spinning around at app start-up. Any other pro5 owner noticed so?16:57
=== grumble1 is now known as grumbe
=== grumbe is now known as grumble
ubptgbot<mattbel10> Consider I just freshly installed Anbox to test it on my phone...could it be related to this issue anyhow?17:26
ubptgbot<Javacookies> I downloaded music in Cloud Music and chose the file manager.....but I can't find the files for the life of me18:22
ubptgbot<Javacookies> not in cache, config and local of cloud music and download manager....18:22
ubptgbot<advocatux> It's a known bug and @johangm90 is working on it. It downloads to `.cache/com.ubuntu.music/HubIncoming/../` and should copy it to `~/Music/Imported/year/month/day/` but it doesn't work18:27
ubptgbot<advocatux> [Edit] It's a known bug and @johangm90 is working on it. It downloads to `.cache/com.ubuntu.music/HubIncoming/../` and should move it to `~/Music/Imported/year/month/day/` but it doesn't work18:28
ubptgbot<advocatux> See https://paste.ubuntu.com/p/xVXJTMqgZX/18:28
ubptgbot<advocatux> BTW, you should find your downloaded music in that first directory18:30
ubptgbot<advocatux> @Javacookies ^18:31
ubptgbot<Javacookies> but I don't have the music directory on my cache yet because I haven't opened it yet ever18:32
ubptgbot<advocatux> It doesn't matter, it should be in `~.cache/com.ubuntu.music/HubIncoming/.../`18:35
ubptgbot<advocatux> Hmm I misread you, sorry. Then I don't know where is downloaded if that directory doesn't exist18:38
ubptgbot<alexey70> @advocatux, Wow a duck18:38
ubptgbot<UniversalSuperBox> @alexey70, That's enough now, the harry potter references were almost funny18:38
ubptgbot<advocatux> @alexey70, What do you mean?18:38
ubptgbot<UniversalSuperBox> Your avatar18:38
ubptgbot<alexey70> Your pic pro18:38
ubptgbot<advocatux> FYI It's a penguin :)18:39
ubptgbot<UniversalSuperBox> I think he knows, he's trying to troll you. :P18:39
ubptgbot<advocatux> Yep, and I'm giving him/her the last chance :D18:40
ubptgbot<Javacookies> @advocatux, it's weird...I know they were downloaded but I really can't find them LOL18:40
ubptgbot<Javacookies> they're lost in quantim realm18:40
ubptgbot<advocatux> Have you took a look to the log?18:40
ubptgbot<advocatux> [Edit] Have you taken a look to the log?18:41
ubptgbot<advocatux> I mean in your phone, not the one I pasted18:42
ubptgbot<alexey70> Last chance means?18:42
ubptgbot<UniversalSuperBox> It means knock it off. :)18:43
ubptgbot<Javacookies> nothing really helpful in the log, just the URL of the actual download18:43
ubptgbot<advocatux> Not `Triggering content-hub import` or something like that?18:44
ubptgbot<Javacookies> ContentPeerPicker.qml has some errora18:46
ubptgbot<Javacookies> like Cannot read property peers of null18:47
ubptgbot<Javacookies> oh well...it's 3am...18:51
ubptgbot<Javacookies> thank you for helping 😁18:51
ubptgbot<advocatux> @Javacookies yw. I was trying to download a song but using the filemanager instead of the music app. This is the output https://paste.ubuntu.com/p/VCH4qPZgcf/18:54
ubptgbot<Javacookies> yeah same with mine18:56
ubptgbot<advocatux> Right. Good night !!18:57
ubptgbot<Javacookies> but you are right, the files are temporarily downloaded in the HubIncoming directory of the receiving app18:57
ubptgbot<advocatux> Yep, let's see what Johan has to said about this issue18:58
ubptgbot<advocatux> [Edit] Yep, let's see what Johan has to say about this issue18:58
ubptgbot<Javacookies> import doesn't to work though...could be a problem with content hub in xenial?18:58
ubptgbot<advocatux> I don't know, maybe an apparmor problem?18:59
ubptgbot<Javacookies> (Sticker, 382x512) https://irc.ubports.com/AjpcuBL4.webp18:59
ubptgbot<malditobastardo> well for me the content-hub filemanager doesnt work quite well when I try to download any file using the browser or an webapp like Nextcloud. After I select the folder where I want to save the file, it just do nothing most of the time19:00
ubptgbot<malditobastardo> [Edit] well for me the content-hub filemanager doesnt work quite well when I try to download any file using the browser or a webapp like Nextcloud. After I select the folder where I want to save the file, it just do nothing most of the time19:00
ubptgbot<amolith> Same here19:00
ubptgbot<advocatux> Yes, that song I was testing is in `~.cache/com.ubuntu.filemanager/HubIncoming/1/` in this case, so the download part works19:05
ubptgbot<Javacookies> hmmm maybe a bug in the new filemanager? it works on mine with the old filemanager but I only tried it in vivid thougj19:06
ubptgbot<Javacookies> and why am I even still awake LOL19:08
ubptgbot<advocatux> πŸ˜‚19:08
ubptgbot<PhoenixLandPirate> @Javacookies, Brains to active19:08
ubptgbotglyphist was added by: glyphist21:22
ubptgbotBenji Smith was added by: Benji Smith21:23
ubptgbot<vanyasem> Hi Benji Smith and his clone Benji Smith21:24
ubptgbot<vanyasem> I want a clone, too. Where can i get one?21:24
ubptgbot<Benji Smith> Hi Ivan, … I'd start with getting 2 phone numbers21:55
ubptgbot<Benji Smith> Then a cloning vat21:55
ubptgbot<Benji Smith> you and clone need two phones ofc :)21:55
ubptgbot<AlexanderPlaza> Anyone has had any luck with running libertine apps? I have some apps installed but the scope doesn’t work and I can’t find any documentation on how to run them once installed. Even via terminal21:57
ubptgbot<Benji Smith> Fill me in, did Canonical discontinue Ubuntu Touch, and now UPorts is a community driven project based of that work?21:57
ubptgbot<AlexanderPlaza> @Benji Smith, That would be correct. :)21:57
ubptgbot<Benji Smith> Thanks AP21:57
ubptgbot<JavierPuche> offtopic:  is there any way to have Dekko (not dekko2) in ubports  ,  I was quite happy with dekko (4 accounts working with minor issues whereas 3 of them I do not get them to work with dekko2 😒 ) and switching to ubports 15.04 deleted dekko as it is no longer in the openstore. Thanks for any help while I fill dekko2 bug report22:11
ubptgbots πŸ‘22:11
ubptgbot<popescu_sorin> @AlexanderPlaza, "ubuntu-app-launch-appids" to get the appid … "ubuntu-app-launch appid" to launch the appο»Ώ22:11
ubptgbot<popescu_sorin> https://www.youtube.com/watch?v=aouooDea1D022:12
ubptgbot<popescu_sorin> https://www.youtube.com/watch?v=4lPzf_MU2Rw22:12
ubptgbot<popescu_sorin> https://github.com/ubports/ubuntu-touch/issues/76322:12
ubptgbot<Photojoe4> Has anyone gotten htop to work on a Nexus 5?23:33

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!