|easy| | thx for all i quit maybe cya later | 00:45 |
---|---|---|
greenbarca2001 | hi all, I'm having trouble setting up the DNS settings for a subdomain | 02:09 |
greenbarca2001 | for some reason it isn't working and I've spent hours trying to fix it | 02:09 |
tomreyn | greenbarca2001: how does this relate to ubuntu then? | 02:13 |
greenbarca2001 | oh I need to do it with bind9 | 02:14 |
greenbarca2001 | is there a more suitable irc chat for this? I tried finding one but I couldn't | 02:14 |
tomreyn | greenbarca2001: i guess here is fine if you have bind related questions. i'm not very much into it, though, maybe soemone else is. | 02:17 |
tomreyn | i guess you'll want two zone files, one for the main domain name (second level domain) and another for the subdomain (third level domain), and have a NS record for the subdomain in the main domain's zone file. | 02:18 |
tomreyn | this way you can have the subdomain delegated to a different authoritative nameserver, which is, from what i understan, your goal. | 02:19 |
tomreyn | there may also be a bind(9= channel, i haven't checked. | 02:19 |
tomreyn | !alis | 02:19 |
ubottu | Alis is an IRC service to help you find channels. For help on using it, see "/msg Alis help list" or ask in #freenode. Example usage: "/msg Alis list http" | 02:19 |
tomreyn | there is also ##networking, but they may be bored by such questions ;-) | 02:20 |
greenbarca2001 | thank you! i don't want different name servers, I want both the domain and subdomain to have the same nameservers | 02:21 |
greenbarca2001 | I just want them to be different domains, this is possible right? | 02:21 |
tomreyn | two domains are not the same by definition. i guess i don't understand. | 02:23 |
tomreyn | A is not B. Also B.A is not A. | 02:24 |
greenbarca2001 | I want a domain example.org, and a subdomain conference.example.org, but I want them to use the same nameservers | 02:24 |
greenbarca2001 | namely, ns1.example.org and ns2.example.org | 02:24 |
greenbarca2001 | this should be possible, right? | 02:24 |
tomreyn | sure. and this nameserver is run by you? | 02:25 |
tomreyn | *these nameservers are | 02:25 |
greenbarca2001 | yep, I configured them in namecheap | 02:26 |
greenbarca2001 | if that's what you're asking | 02:26 |
tomreyn | maybe, depends on how you configured them. i'm asking whether ns1.example.org and ns2.example.org point to servers you manage. | 02:27 |
tomreyn | i assume one of them is the one you are trying to configure bind on | 02:28 |
greenbarca2001 | oh yes they do | 02:28 |
greenbarca2001 | they both point to my server IP address | 02:28 |
greenbarca2001 | I only have one server | 02:28 |
greenbarca2001 | 2 nameservers | 02:28 |
tomreyn | well that's not how do you dns. with just one server you can point the second to some free backup dns. | 02:29 |
tomreyn | search the web for "free secondary dns" OR "free backup dns" | 02:30 |
tomreyn | maybe namecheap also provides one. | 02:30 |
greenbarca2001 | I mean the main domain works | 02:33 |
greenbarca2001 | I don't quite understand what you mean, the ns2 name server is the backup | 02:34 |
greenbarca2001 | I looked up what you said it seems as though I'm already using Namecheap’s Secondary DNS? | 02:34 |
tomreyn | how would i know? | 02:35 |
=== bhuddah_ is now known as bhuddah | ||
=== svetlana is now known as Sveta | ||
hellerz | Hello guys, I have installed XRDP on my ubuntu 16.04 LTS. 18 days and today I'm trying to connect to my server through remote desktop but It won't let me | 11:52 |
hellerz | Is there a way to fix this without reboot? | 11:52 |
sine` | I have just installed ubuntu server and install the unity desktop. how can I access a desktop remotely | 12:45 |
xibalba | I could use some assistance with some basic IPTables (not my forte). I have setup a SSH VPN from my network to a remote cloud system. I want to use my local system as a gateway and forward all traffic incoming on ens160 to tun0. I can ping from tun0 on my local system to tun0 on the remote system, so no issue there. When I put in my IPTables commands to Forward incoming traffic from ens160 to tun0, I never see it make it into the | 12:51 |
xibalba | tun0 interface on the local system (checked with tshark/tcpdump) | 12:51 |
xibalba | i used the following commands, /sbin/iptables -A FORWARD -i eth0 -o tun0 -m state --state RELATED,ESTABLISHED -j ACCEPT | 12:51 |
xibalba | opps i meant ens160 not eth0 | 12:52 |
xibalba | https://paste.ubuntu.com/p/FX7wXgSHNv/ | 13:05 |
qman__ | ok, a couple things - did you turn on IP forwarding, and did you set up the routes? | 13:17 |
jimmy06 | Im trying to install Server 18.04 but the network config times out anyone got any ideas about this? | 14:36 |
jimmy06 | https://i.imgur.com/jBJVPgb.png | 14:37 |
jimmy06 | https://i.imgur.com/VkMwffJ.png | 14:38 |
compdoc | thats odd looking. text based browser? | 14:38 |
blackflow | jimmy06: Hetzner? | 14:39 |
compdoc | you setup netplan? | 14:39 |
jimmy06 | hetzner yes | 14:39 |
blackflow | jimmy06: wrong gateway | 14:39 |
jimmy06 | this setup worked on 16.x just now | 14:39 |
jimmy06 | gateway is correct | 14:39 |
jimmy06 | its a hetzner thing | 14:39 |
blackflow | I know, but did it end up in .1 or .2 ? | 14:40 |
blackflow | iirc was .1 | 14:40 |
jimmy06 | I dont understand the question sorry | 14:40 |
jimmy06 | .1 or .2 ? | 14:40 |
blackflow | and you really don't need to obfuscate it, it's a RFC 1918 subnet, private and non-routable | 14:40 |
jimmy06 | you sure about that? | 14:41 |
jimmy06 | its my main servers ip addres | 14:41 |
jimmy06 | the gateway | 14:41 |
jimmy06 | then other server is a vm | 14:41 |
jimmy06 | the screen shots are from a proxmox vm | 14:42 |
blackflow | jimmy06: yes, the gateway. isn't it 176.16.1.1 ? | 14:42 |
blackflow | ah... 172.16.... | 14:42 |
jimmy06 | the gateway ip is the server ip | 14:42 |
jimmy06 | 176.x.x.xx2 | 14:43 |
jimmy06 | 176.9.3.xx2 | 14:43 |
blackflow | jimmy06: nevermind, I misread that gateway as Hetzner's CX gateways that are in the RF1918 range | 14:43 |
jimmy06 | fair enough :) | 14:43 |
jimmy06 | normally i have to install 16.x without an adaptor config | 14:43 |
blackflow | 172.16..... 176.... all them numbers buzzing around | 14:43 |
jimmy06 | then config it after but I cant skip it at all here | 14:44 |
jimmy06 | compdoc: what do you mean by thats an odd looking text based browser? | 14:49 |
compdoc | I asked if it was. never saw that before | 14:50 |
jimmy06 | no its the installer for 18.04 server | 14:50 |
compdoc | ah. I havent used that yet | 14:51 |
jimmy06 | I cant even press the F keys to move to another console :( lol | 14:54 |
jimmy06 | Oh wait I might be able to switch the network device and get it installed with a private NAT interface then change it afterwards | 14:54 |
RoyK | jimmy06: ctrl+alt+f1 | 14:56 |
RoyK | the new installer really sucks | 14:56 |
RoyK | better use the old one | 14:57 |
jimmy06 | I cant use F keys RoyK as its a VM console in a browser | 14:58 |
jimmy06 | my other approach worked | 14:58 |
jimmy06 | its installing now | 14:58 |
jimmy06 | in fact its done :D | 14:58 |
jimmy06 | ah balls it seems it still wont accept the default gateway | 15:31 |
jimmy06 | got it used on-link | 15:39 |
mwhudson | tomreyn: oh man, i just need to make subiquity/curtin understand "use all the remaining space for this partition" | 18:02 |
tomreyn | mwhudson: yes, looks like it doesn't understand this., although it shows correct (or correctly seeming) sizes on the GUI | 18:05 |
mwhudson | yeah, the calculations are almost right | 18:05 |
mwhudson | just not down to the last k or whatever | 18:05 |
tomreyn | it could always ask the tools what's actually available | 18:06 |
mwhudson | no, because at the time you are editing things in the ui no actual changes are being made to the disks | 18:07 |
* mwhudson --> food | 18:07 | |
tomreyn | hmm you're right, of course, it doesn't create the PV at this point, just partitions are written. | 18:08 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!