[05:22] <ubptgbot> Ralph was added by: Ralph
 Hey guys!
 Does the GUI for the openvpn work?
 I've been trying to get it working with my vpn server, but I can only get through with it when I'm doing it from the terminal and running the .ovpn file itself
 in gui, it asks for the key, ca, crt etc.
 so I split the ovpn config into separate files
 [Edit] so I split the ovpn config into separate files accordingly
 and manually set up like in the ovpn
 but it only gives the unhelpful: the vpn connection failed
 is there a better way to run the .ovpn file via the gui?
[08:39] <ubptgbot> Yves Goux was added by: Yves Goux
 It works fine for me with my vpn - Mullvad
 @tylnesh [but it only gives the unhelpful: the vpn connection failed], you can check syslog for  … additional info on why it fails the vpn editor app in the open store  … also reveals more options
 @Fuseteam [you can check syslog for  … additional info on why it fails the vpn editor app in …], True
[10:52] <ubptgbot> <Peter Keck> (Sticker, 512x512) https://irc.ubports.com/T7cTmPIZ.webp
 guys < I just  update teh authenticator app and now .. it is not scanning new codes ,... camera can not focus
 (Sticker, 377x512) https://irc.ubports.com/6ROUGlxE.webp
 can some1 do something  ? I depend on that app
 (Document) https://irc.ubports.com/90TB7Jua.null
 Try with this
 HI
 @malditobastardo [<reply to media>], I can confirm that with OpenStore version focus does not work.
 With your version focus works BUT images is 90 degree rotated.
 Should any qr code work?
 It wouldn't read the code. But I havn't got a two factor code at hand.
 Ok, it was the code. Just found one in a how to, that worked.
[13:24] <ubptgbot> <Graham Clark> @dohbee [press both volume buttons simultaneously], Thank you for that. Given only three buttons, you would have thought i would have discovered that. … .....  … But sadlly no.
[13:25] <ubptgbot> <Graham Clark> @John (Marlin) [It's on a sticker inside the case, but you can view it in About Phone instead.], Ah, yes, I found the emei number but i couldn't find the details the guy on a youtube vid was saying existed. It was on a different type of phone, mind.
 @Danfro [I can confirm that with OpenStore version focus does not work.], @dohbee
 @malditobastardo [@dohbee], it's fixed in master. i'll make a new release soon
 I cant see videos in ubuntu touch nexus 5
 my camera videos
 @Portu51 [my camera videos], Yes, that doesn't work at the moment.  Use the UTMedia app for the time being.
 Ok thank's
 You're welcome.
 Linugs boots on 2520 now :))
[17:25] <ubptgbot> arthurtan650 was added by: arthurtan650
 With plenty of confirmations, I'm sending the current devel image to RC late this week.
 Yay OTA10
 (Sticker, 512x512) https://irc.ubports.com/iT0bqe8v.webp
 @UniversalSuperBox [With plenty of confirmations, I'm sending the current devel image to RC late thi …], 👍 🍾
[19:32] <drFaustroll> hi... i have installed ubports on an meizu mx4... all good and working... till i have managed to forget my pin
[19:33] <drFaustroll> now the issue is I do not manage to boot in any form of recovery and do a factory reset
[19:33] <drFaustroll> do I miss anything?
 Yeah!
[20:18] <ubptgbot> Eike_der_Auferstandene was added by: Eike_der_Auferstandene
 @UniversalSuperBox [With plenty of confirmations, I'm sending the current devel image to RC late thi …], Goodd work.
 @UniversalSuperBox [With plenty of confirmations, I'm sending the current devel image to RC late thi …], [Edit] Good work.
[20:34] <drFaustroll> ok seems to be something fishy.. installed it on n5 without issues on mx4 simply does not want
 mx4 has a notoriously finicky USB port/controller
 i'm not sure what all is doable in recovery, though
[20:37] <drFaustroll> ubptgbot:  indeed
[20:37] <drFaustroll> ubptgbot: but is still funny
[20:38] <drFaustroll> also instructions in ubports installer state power plus volume down
[20:38] <drFaustroll> zero effect
 you have to hold them until recovery comes up. though i don't recall off hand if it's correct combination for mx4
 might be volup instead (some devices vary, iirc)
[20:40] <drFaustroll> ubptgbot: i think is not
[20:40] <drFaustroll> ubptgbot: yap volup but i end up in ubuntu logo
 you can adb i guess from there, and flash the device again though no? (not sure if you care about your data or not)
 but if it was flashed with ubports installer before i think it should have the adb-enabled recovery
[20:45] <drFaustroll> ubptgbot: I do not care about the data... i try to flash it again
[20:46] <drFaustroll> ubptgbot: adb devices shows nothign which worries me
[20:46] <drFaustroll> lsusb lists nothing related to meizu
[20:46] <drFaustroll> only when i boot shows something
[20:56] <drFaustroll> ubptgbot: crazy... got it in the end in the right spot
[20:56] <drFaustroll> ubptgbot: thanks for help is power with down
[20:58] <ubptgbot> Steephen was added by: Steephen
 Moin, … I'm new on this topic. Does Telegram work fine under UT?
 yes, you can use web telegram, or teleports app
 Not the Linux client?
 you can use an armhf built deb version under libertine if you want i guess; but it's not really optimized for touch devices, and doesn't integrate with push notifications and such
 Does the ubports support push notifications?
 yes
 [Edit] Does the ubports (teleports*) support push notifications?
 how? … I should make it run in background?
 the webapp does not though
 @dohbee [you can use an armhf built deb version under libertine if you want i guess; but …], Thanks
 no, you need to log into an Ubuntu One account in system-settings, and then enable notifications in teleports
 @dohbee, I don't suppose you could point me to how the "app delegate stuck to your finger when you swipe from the right" works?
 for the app grid?
 Well, in edge the animation is completely broken
 It's like we're trying to play three things at once, and even then in the wrong order
 So what's supposed to happen is the old app fades out while the new app slides in. That's the ideal new case.
 hmm
 right, for the short swipe case
 Instead the old app fades out (to opacity 0), then snaps back to opacity 1 because the animation ended, then the new app slides in
 However
 It's also possible, by sliding out slightly further and slower, to get the old behavior of "App stuck to your finger"
 The start of the Spread animation
 If you release then, the app flips in like the old model
 Then the other two animations play after the flip is finished
 (Document) https://irc.ubports.com/AgunOmgo.mp4
 Er, wrong one
 (Document) https://irc.ubports.com/yE40YdD1.mp4
 This is a slightly better idea of what's happening
 hmm
 not sure :-/
 I can see how the current wrong one happens. It plays the fade animation then plays the slie
 [Edit] I can see how the current wrong one happens. It plays the fade animation then plays the slide
 They block for whatever reason
 But I don't see why I can get all three
 I'd rather just have the old behavior
 not really sure, and unfortunately don't have time right now to go digging in the code.
 Yeah, I've been digging. Was both for rubber ducking and wondering if it was on the tip of your tongue
 @UniversalSuperBox [<reply to media>], curious: what app are you running here?
 `make tryShell` inside a Unity8 build tree
 It's part of the self-test system
 nice
 Oh, I found it
 There's a transition and a pair of ParallelAnimations
 I think both run
 If the animation doesn't play, apps can't switch.
 That's fun
 does anyone else with a Meizu Pro 5 sometimes get a double boot?  Sometimes I get the splash screen, then the Ubuntu Touch pinkish startup screen, then it goes dark, and the it does it all over again before booting.  On RC channel
 Sounds like unity8 crashing and taking the session with it. Would love to see `.cache/upstart/unity8.log` after that happens.
 Hey I fixed it
 @UniversalSuperBox [Sounds like unity8 crashing and taking the session with it. Would love to see .c …], Do I need to install anything in order to generate that log file?
 no
 @dohbee [no], ok - will see if I can get it to repeat the issue and then will post log
 @Graham Clark [Thank you for that. Given only three buttons, you would have thought i would hav …], you can also swipe the volume rocker if you have one volume rocker instead of two volume buttons :3
 @samzn [Linugs boots on 2520 now :))], 2520?
 Lumia 2520
 @samzn [Lumia 2520], are you booting up a desktop distro on it or Ubuntu Touch?
 Just Linux
 [Edit] Just the Linux kernel for now
 I don't have interest of getting ubports to it but I know people here who would like to follow up
 [Edit] I don't have interest of getting ubports to it anymore but I know people here who would like to follow up
 glad to hear the kernel boots, now for the hard part; device drivers
 (Photo, 312x154) https://irc.ubports.com/055Jz5fZ.png There are easter eggs in the test suite
 lol
 @Fuseteam [glad to hear the kernel boots, now for the hard part; device drivers], DT generated by ACPI exposes almost everything, I was surprised a lot just worked and initialized properly before the first kernel panic
 interesting might be worth to try the pinephone rootfs to see what works and what doesn't
 what did you have to do to get the kernel to boot?
 Chainloading Tianocore, fixing some things specific to MSM8974, emmc driver, etc, getting the memory map correct and then boom
 .........i...i see
 I think it should be possible to have a generalized kernel source for MSM8974
 i assume msm8974 is specific for lumia 2520 right?
[22:04] <ubptgbot> Alessandro Felici was added by: Alessandro Felici
 @Fuseteam [i assume msm8974 is specific for lumia 2520 right?], msm8974 is snapdragon 800
 ah interesting, well if it can use the devices full hardware with a reference rootfs i don't see why not
 did you know that few of the 'over 100 devices that boot pmos' includes some lumia devices?
 @Fuseteam [did you know that few of the 'over 100 devices that boot pmos' includes some lum …], Yes but those are still based on the limited Android ports for the *20 series
 @Fuseteam [did you know that few of the 'over 100 devices that boot pmos' includes some lum …], uses another kind of bootloader
 it's more android focuses
 [Edit] it's more android focused
 Uses an old CAF-based kernel I believe
 @TotalSonic [does anyone else with a Meizu Pro 5 sometimes get a double boot?  Sometimes I ge …], My N5 does that once in awhile, its usually if I tell it to restart, my galaxy note 4 port did it like every other boot
 @jja2000 [Yes but those are still based on the limited Android ports for the *20 series], ah i see
 @samzn [Uses an old CAF-based kernel I believe], interesting
 (Document) https://irc.ubports.com/QV20i0uF.txt
 @UniversalSuperBox [Sounds like unity8 crashing and taking the session with it. Would love to see .c …], see above
 @TotalSonic [see above], There are only two lines here
 I don't understand how unity8 is so smooth on the fairphone 2 but falls down on the oneplus one
 @UniversalSuperBox [I don't understand how unity8 is so smooth on the fairphone 2 but falls down on …], this was on Meizu Pro 5 after a restart and a double boot
 Seems rather small — maybe serendipity hit and the log was rotated
 Try `unity8.log.gz`
 or `.1.gz`
 The Fairphone 2 and Oneplus One have the same GPU for pete's sake
 Will the upstart on Ubuntu Touch be updated and have innovations?
 Nah, we'll switch to systemd eventually
 @UniversalSuperBox [Nah, we'll switch to systemd eventually], 😅
 With the mountain we need to maintain, a deprecated init system is just dumb
 @UniversalSuperBox [With the mountain we need to maintain, a deprecated init system is just dumb], So the upstart is temporary, will it stay until mountain is over?
 Well the mountain will never be over
 it'll probably stay until we can safely put the current set of supported devices to rest
 It's another thing on the pile. We'll be forced to switch with a distribution upgrade, so it'll probably be at that time