[01:44] <ubptgbot> BD_y_not was added by: BD_y_not
 @ian_mcxa [I've successfully added a dvorak layout to the keyboard!], What did you do, I am having problems with the English Dvorak language setting not actually affecing the keyboard. I am on a Nexus 5.
 The code isn't actually in ubports yet
 you can see our progress here https://github.com/ubports/keyboard-component/pull/86
[03:28] <gitbot> ubports issue (Pull request) 86 in keyboard-component "Add dvorak layout" [Open]
 @ian_mcxa [you can see our progress here https://github.com/ubports/keyboard-component/pull …], Thanks, so should I just wait at this stage?
 Yeah, unless you're looking to do some hacking :)
 @ian_mcxa [Yeah, unless you're looking to do some hacking :)], Would love to but would need a bit of hand holding as I would describe myself as a reasonably competent arch user, but definitely not a hacker.
[03:54] <ubptgbot> prasadkumar013 was added by: prasadkumar013
 @madas_pal_5 [I am sorry if it is not the proper forum to ask this… … Can anybody see a chance t …], Cut the Rope has been updated to QtWebEngine and are looking for feedback on bringing the game back to platform. … https://www.reddit.com/r/UbuntuPhone/comments/cwqadj/revive_cut_the_rope_on_ubuntu_touch/
[05:19] <ubptgbot> Andrea was added by: Andrea
 I've been watching this PR from the person porting ubports to the xperia x … https://github.com/ubports/telepathy-ofono/pull/5
[05:37] <gitbot> ubports issue (Pull request) 5 in telepathy-ofono "Headset detection changes for Halium compatibility" [Open]
 it seems PRs are handled a bit slowly
 I hope the port this person is working on reaches the finish line
 @Christopher [it seems PRs are handled a bit slowly], depends on the PR really
 Hello There, can you tell me where can I find the source code of a package on my phone? I want to slightly modify network-manager. The source on GitHub/UBports is network-manager-packaging. However if I want to build it with crossbuilder, it complains that there is no network-manager-1.2.2 source package... Then, I've found "Stable Pho
[06:14] <ubptgbot> ne Overlay PPA" on Launchpad. That one uses different versions than on my phone installed.
 So, I'm lost
 Hi all. My power button broken and I had to boot phone from recovery. I guess it booted good, right 🤔?
 (Photo, 622x1280) https://irc.ubports.com/kROrfmZI.png
 (Photo, 622x1280) https://irc.ubports.com/vgQnnOso.png
 (Photo, 622x1280) https://irc.ubports.com/GXA8g07C.png
 (Photo, 622x1280) https://irc.ubports.com/JWRws4AB.png
 the screen is obviously shifted upwards....perhaps a hardware issue?
 @Hangman228 [<reply to media>], Is it this? https://github.com/ubports/ubuntu-touch/issues/27
[06:40] <gitbot> ubports issue 27 in ubuntu-touch " displaced screen " [Bug, Device: Hammerhead, Open]
 @Flohack [Is it this? https://github.com/ubports/ubuntu-touch/issues/27], Thx. It happend after I removed back from phone while phone was on. Now no matter what I do, it boot like that. I guess I'll need new display ?
[06:43] <gitbot> ubports issue 27 in ubuntu-touch " displaced screen " [Bug, Device: Hammerhead, Open]
 weird, I never got his on my Nexus 5
 [Edit] weird, I never got this on my Nexus 5
 @Javacookies [weird, I never got this on my Nexus 5], I bought my phone from some1, it wasn't new. Power button was broken, display was little laggy and whole phone looks like some1 was using it as hammer to hammer nails
 @Hangman228 [Thx. It happend after I removed back from phone while phone was on. Now no matte …], Ouch. Try to reseat all connectors. It might be just that
 @Flohack [Ouch. Try to reseat all connectors. It might be just that], I'll try it soon. Got some work, thanks
 @Hangman228 [I bought my phone from some1, it wasn't new. Power button was broken, display wa …], UT is quite smooth on Nexus 5 so it should not be laggy but the power button is a common issue, mine's barely working 😅
 I guess the original user took its name literally....as a hammer's head 😂
 hi guys, is it possible to disable the animations in ubports this would allow my nexus 4 to work faster)
 Hey guys, quick question: Where do I report a bug with Openstore? When I go to the Openstore Bugtracker it is archived, cannot add a bugreport.
 [Edit] Hey guys, quick question: Where do I report a bug with Openstore? When I go to the Openstore Bugtracker it is archived, cannot add a bugreport. … https://github.com/UbuntuOpenStore/openstore-meta/issues
 Oh nice, in the thumbnail it says moved to GitLab.... Not on the page :D
 @Jo_Led [Oh nice, in the thumbnail it says moved to GitLab.... Not on the page :D], https://gitlab.com/theopenstore/openstore-app
 Thats for the app
 you need web page instead?
 @Flohack [you need web page instead?], No that's perfect. Thanks Flo!
 @Jo_Led [No that's perfect. Thanks Flo!], No sorry its different: https://gitlab.com/groups/theopenstore/-/issues
 They have a issue collector
 @Flohack [They have a issue collector], Yeah sure, I just clicked on the bug tracker, ezpz, thanks.
[08:58] <ubptgbot> The Price was added by: The Price
[08:58] <ubptgbot> <The Price> (Photo, 200x200) https://irc.ubports.com/MCXW1FVc.png
[08:59] <ubptgbot> <The Price> (Photo, 690x378) https://irc.ubports.com/s17jpDUg.png
[08:59] <ubptgbot> <The Price> fff fanlzldtue a
[08:59] <ubptgbot> <The Price> [Edit] http://bit.ly/2YXWVmM?34383
 @xxxvhxxx [hi guys, is it possible to disable the animations in ubports this would allow my …], No, and they are almost certainly not related to whatever slowness you're perceiving
 @FeketeZoli [Hello There, can you tell me where can I find the source code of a package on my …], What is your goal exactly? We don't maintain n-m. We just package it.
 @prasadkumar013 [Cut the Rope has been updated to QtWebEngine and are looking for feedback on bri …], Yes, and the person who made that thread is already in here
 I want to change the hardcoded 10.42.0.1 address to another one for hotspot. My VPN uses 10.0.0.0/255.0.0.0. So it des not wotk together
 @dohbee [Yes, and the person who made that thread is already in here], Oh. Wow. Didn't know that. Newbie to group here 😅
 [Edit] headset for use in calls will basically not work right now
 @dohbee [What is your goal exactly? We don't maintain n-m. We just package it.], I want to change the hardcoded 10.42.0.1 address to another one for hotspot. My VPN uses 10.0.0.0/255.0.0.0. So it des not wotk together
 @FeketeZoli [I want to change the hardcoded 10.42.0.1 address to another one for hotspot. My …], Ok. I don't think that change would be in n-m at all, and probably would involve multiple components to make it properly configurable. Why does your VPN need such a huge range though?
 @dohbee [Ok. I don't think that change would be in n-m at all, and probably would involve …], It's a huge corporate LAN
 @FeketeZoli [It's a huge corporate LAN], Anyway, I've already checked. It't in n-m, the file is nm-device.c:6337:           guint32 start = (guint32) ntohl (0x0a2a0001); /* 10.42.0.1 */
 that's still a huge range o.O
 @Fuseteam [that's still a huge range o.O], I'm just getting it: …  IPv4 Address. . . . . . . . . . . : 10.237.74.63 …   Subnet Mask . . . . . . . . . . . : 255.0.0.0 …   Default Gateway . . . . . . . . . : 10.0.0.1
 But, in general I just want to do a successful build/package creation for n-m. After that I could play around with modifying the source. Crossbuilder seems to be simple to use, it just mixes up with nm versions at fetching the sources.
 I don't think you can use crossbuilder for that
 @dohbee [I don't think you can use crossbuilder for that], That's why I ask the help of the experts :)
 Is the UT porting for Xiomi A1 is completed ?
 @jishnuraj_444 [Is the UT porting for Xiomi A1 is completed ?], if it's not on the supported devices page, then it is not
[13:33] <ubptgbot> higorhsp was added by: higorhsp
 is packaging and building even the same?
 @FeketeZoli [I'm just getting it: …  IPv4 Address. . . . . . . . . . . : 10.237.74.63 …   Subnet …], why wouldn't 10.42.0.x be compatible with that range? ip conflicts?
 @Fuseteam [why wouldn't 10.42.0.x be compatible with that range? ip conflicts?], 255.0.0.0 is 10.*.*.*
 hmmm
 @Fuseteam [why wouldn't 10.42.0.x be compatible with that range? ip conflicts?], I don't know exactly. We are obliged to use Cisco AnyConnect Client to connect the remote corporate network. It's simply doesn't connect. If I use my other phone's hotspot, that announces adresses in 192.168.43.x, the connection goes well. I just assume, t
[15:36] <ubptgbot> hat the IP range is the problem.
 @FeketeZoli [I don't know exactly. We are obliged to use Cisco AnyConnect Client to connect t …], In the mean time I started to build network-manager deb for armhf in a chroot. It looks well.
 @UniversalSuperBox [255.0.0.0 is 10.*.*.*], guess i'm still lost but if you put it that way it sounds as if its because it's in the network range it doesn't work
 Yes, you cannot have two networks which overlap
 @UniversalSuperBox [Yes, you cannot have two networks which overlap], That's my assumption, too.
 interesting TIL
 @FeketeZoli [In the mean time I started to build network-manager deb for armhf in a chroot. I …], How you would run 2 network manager at the same time
 @Flohack [How you would run 2 network manager at the same time], you don't
 he's probably building it on his workstation
 @Flohack [How you would run 2 network manager at the same time], No, I want to run my own modified version only. let's see. Compilation in a chroot goes very slow...
 building != running
 @FeketeZoli [No, I want to run my own modified version only. let's see. Compilation in a chro …], well, compiling on a phone is slow, indeed
 @dohbee [well, compiling on a phone is slow, indeed], I'm doing it in an Ubuntu 18.04 desktop. Just in an armhf chroot env.
 either case it sounds like the ability to set the rdnis gateway ip is a valid feature request :3 … i hope you suceed
 [Edit] either case it sounds like the ability to set the rdnis gateway ip is a valid feature request :3 … i hope you succeed
 👍 Thanks.
 a pr might be in order when you succeed :3
 @Fuseteam [a pr might be in order when you succeed :3], I'll inform you about the result. Now I'm still building the unmodified nm package first. If it's passed, then I start modifying the code.
[15:56] <ubptgbot> ■ was added by: ■
 hi guys … im new here and i have a question. … is there any way to install Ubuntu Touch on nexus 7 2012 3G which is not listed on supported devices? (there is nexus 7 2013 version)
 @■ [hi guys … im new here and i have a question. … is there any way to install Ubuntu To …], well.. I mean... the obvious way is to see if there is a port going on for it and hope for the best?
 @FinlayDaG33k [well.. I mean... the obvious way is to see if there is a port going on for it an …], Yes
 @FeketeZoli [I'll inform you about the result. Now I'm still building the unmodified nm packa …], Please pm me, we already started this effort to build a newer upstream version
 ^^ yes pm him not me
 @■ [hi guys … im new here and i have a question. … is there any way to install Ubuntu To …], The 2012 Nexus 7's are just seriously problematic.  Even my 2013 Nexus 7 LTE (deb) has problems with bluetooth, camera and side stage not functioning for it.  Hopefully when PineTab comes out UT will be able to work decently with it so that a n
[16:12] <ubptgbot> ew option for UT on tablet is avaialble.
 @Flohack [Please pm me, we already started this effort to build a newer upstream version], Ok, recorded.
 @■ [hi guys … im new here and i have a question. … is there any way to install Ubuntu To …], no, and it won't likely be supported again. it's extremely bad even with android on it. there was someone who claimed to be wanting to start a port again, but i'm guessing they did not get very far. you're welcome to try as well
[18:32] <ubptgbot> Batuhan Coşkun was added by: Batuhan Coşkun
[18:34] <ubptgbot> <Batuhan Coşkun> Hello brothers,   … I want to install Ubuntu Touch. … I didn't like it or get used to it. Can I go back to Android?
 yes, just follow the instructions for flashing the factory image back to the device
[18:36] <ubptgbot> <Batuhan Coşkun> Does Ubuntu Touch have Turkish support?
 there's translations and keyboard support. i'm not sure how complete the translations are. and many apps in the store may not be translated
[18:43] <ubptgbot> <Batuhan Coşkun> 🙁
 You can always offer to translate them? :)
[18:48] <ubptgbot> Furnace McOven was added by: Furnace McOven
 @Furnace McOven [Furnace McOven was added by: imraniqbal], Welcome.  @TotalSonic, this was the interested party (apps in Libertine).
[18:51] <ubptgbot> <Furnace McOven> @imraniqbal [Welcome.  @TotalSonic, this was the interested party (apps in Libertine).], I’ve been testing random apps to see what works and what doesn’t. I’ll try to share this as soon as the list becomes a bit more extensive
 I still want to make a "better" (in my values and opinions that is) audio player for UT but the HTML5 API is too limited and I'm already learning so much stuff that there is no real place to also learn QML T_T
 not sure what you consider "better" but the best way to learn QML is to just jump in
 indeed QML appears to be less difficult than it appears at first
 been fiddling with the last week … the more i find out the simpler it seems
 QML probably isn't the most difficult but when you still have a day job and am still learning 24 or different things it's a pain xD
 if only the HTML5 version has stuff like a fileApi T_T
 well you're welcome to go make cordova work again
 xD
 I'll pass :p
[19:41] <ubptgbot> rasmith1959 was added by: rasmith1959
 (Photo, 1280x800) https://irc.ubports.com/6IpUeRnn.png
 Is this known?
 i can't read dutch
 but i guess you're on edge channel?
 Ah right. But props for recognising it
 Yes I am.
 someone else was complaining that google gave an error when trying to add an account there earlier, in qa group, but that it works fine in devel
 Looks like google doesn't recognise ut accounts service
 and, well, i have no idea why it would work in devel but not edge (the accounts stuff is the same for both)
 Itstarted with calendar not synching and offering to reconnect with google
 i don't use the google sync on my devices; but afaik nothing has changed there since the issue that blocked up OTA 10, and even if it had, it'd be the same in edge as in devel
 did you get an e-mail to your gmail about account access?
 'this app has not yet been verified by Google for use of the 'sign in with Google' service'
[19:51] <ubptgbot> cagatay_yksl was added by: cagatay_yksl
 @dohbee [did you get an e-mail to your gmail about account access?], Yes I gen it every time I try again, and I verify that, yes it was me trying to log in.
 hmm, ok
 if you go back to devel does it work?
 Apparently somethig did change in the way the device or accunts service identifies itself to google
 Not yet
 Needs adb and all that,right?
 you can switch channel to devel in system settings
 Channel says edge, but the channel settings submenu has development already selected
 rc then?
 [Edit] Channel says edge, but the channel settings submenu has devel already selected
 Toggling back andforth seems to have worked
 Dling now
 (Photo, 1080x438) https://irc.ubports.com/0ea8AZms.png
 This is what calendar app said when trying to sync btw
 yes
 yes takes me to google login, and then to the screenshot above
 my tablet is back on, lets see
 nope switching to devel didn't help
[20:10] <ubptgbot> tangent_X was added by: tangent_X
 @YougoChats [nope switching to devel didn't help], ok, that's counter to the previous report, but maybe the old token has been revoked now.
 (Photo, 1280x800) https://irc.ubports.com/Jfj1lXyj.png
 (Photo, 1280x800) https://irc.ubports.com/G1ze7ezm.png
 google says i'm connecting to "ubuntu.com". when clicking on that, i get this:
 yes i understand
 that doesn't look very ubportish to me?
 @FinlayDaG33k [if only the HTML5 version has stuff like a fileApi T_T], psssi its very similar to css
 could it be that canonical revoked something?
 @YougoChats [could it be that canonical revoked something?], i think google did. and yes, we were using the same app token as canonical set up long ago.
 so all google+UT users are screwed?
 still odd
 maybe not we'll see
 or just me
 first we need to figure out what the difference is
 @YougoChats [so all google+UT users are screwed?], for the moment yes, i think so
 *adds to list of reasons do finally tear loose of google*
 thanks for your time anyway
 @YougoChats [so all google+UT users are screwed?], Can't confirm. Works on my Nexus 7
 @YougoChats [*adds to list of reasons do finally tear loose of google*], I eliminated my need for Google Calendar by getting a free 5gb NextCloud account with OwnCube.com and then using CalDav to sync my UT Calendar with my desktop computers' calendars (using Lightning extension in Thunderbird) and my laptops (using Gnome Calendar)
 They don't do the free part any more it seems
 But yes own/nextcloud is on my list of alternatives
 Hey @YougoChats, got shell access on that thing?
 Can you send me `/usr/share/accounts/providers/google.provider`? Either paste.ubuntu.com or whatever you want
 Ill try
 https://pastebin.com/Ku11RUYS
 Hmm, nothing different there.
 To be sure, it says "Ubuntu would like access to:..." on the authorization screen, right?
 No i dont even get to that screen
 Hmm
 What if you do it in portrait orientation?
 Ooh, is there a Google in `~/.local/share/accounts/providers/`?
 @UniversalSuperBox [What if you do it in portrait orientation?], Same, just more white space
 (Photo, 1920x1080) https://irc.ubports.com/8lVbkPPl.png
 @UniversalSuperBox [Ooh, is there a Google in ~/.local/share/accounts/providers/?], .
 hmmhmm
 Do you have a `.customized` file in your home directory?
 No
 I don't know why that thing would behave any differently
 @YougoChats [They don't do the free part any more it seems], they still do - https://owncube.com/free_next_en.php
 This is a little overboard, but could you do `grep -r ClientId` in your home folder? Maybe it'll pop up another file.
 If not, try again in `/usr/`
 It's acting like you have a different key than anyone else on the M10
 And no other device has it
 @UniversalSuperBox [I don't know why that thing would behave any differently], I suspect it actually isnt edge related. If i look in my google accounts settings under apps, there is nothing ubunru related. Only 'gnome' for my pc's online account. Seems google kicked ubuntu apps out
 It did not, I can sign in with any other device
 @UniversalSuperBox [It's acting like you have a different key than anyone else on the M10], 😅 the google.provider actually came from my fp2 which has the same problem
 I was trying to get the Signal webapp going in UT but it does not allow me to get beyond the "Register" screen.  Is there something I need to do in order to get it to work?
 @UniversalSuperBox [This is a little overboard, but could you do grep -r ClientId in your home folde …], That runs forever...
 Well it is searching through every file in your home directory
 Not coming up with anything though
 Trying again in usr
 https://pastebin.com/mhRGTHeu
 Not terribly interesting
 It should have matched on the account files though
 Oh..
 `ClientId`
 lowercase d
 @YougoChats [Not coming up with anything though], typo ^^
 https://pastebin.com/VyV0rB02
 https://pastebin.com/VyV0rB02
 No spam, is grep🙄
 Hmm. It's using the same ID as everyone else
 I removed the google account from my M10 and switchched it from edge to devel. My fp2 is still on edge and has a Google account. Either reconnecting or adding a new account results in the same error
 Hmm. My FP2 just did it, no problem
 Do you have 2FA on your account?
 No. Dekko needs it off, and less secure acces on,  iirc
 Hmmm, indeed. You get sent to a different sign-in page that says "sign in to continue to ubuntu.com" on edge
 And from here on it's broken. Since it carries over from edge to devel, it's in a user space file?
 But i'm pooped. Need some sleep.
 Thanks for your time, Dalton. Lets pick this up again later
[22:41] <ubptgbot> Teresa Smartt was added by: Teresa Smartt
[22:41] <ubptgbot> <Teresa Smartt> (Photo, 362x403) https://irc.ubports.com/6m6CqOby.png
[22:41] <ubptgbot> <Teresa Smartt> (Photo, 631x391) https://irc.ubports.com/JMZOtIM2.png
[22:41] <ubptgbot> <Teresa Smartt> mchj gbhhrwcsgcwae g