[00:10] <OvenWerks> ChuckLutz: the 1010 has +4 or -10 outputs, what does your mixer use?
[00:11] <OvenWerks> ChuckLutz: using mudita24 on the analog tab, maybe try running the output level a bit lower
[00:13] <OvenWerks> ChuckLutz: I normally run my DAC 1 and 2 level at about -11 or so to go into my mixer inputs. But if you have mic or instrument inputs it may need to be lower because an instrument level would be -20 to -30 and mic is as low as -50 or even lower
[00:14]  * OvenWerks has a ribbin mic that is -65
[00:24] <Eickmeyer[m]> !ubuntustudio-controls | tryingnethings
[00:24] <tryingnethings> Thank you Eickmeyer[m]
[01:41] <craigbass76> Bah, I'm back to having to use a Focusrite Scarlett box... The audio mixer I have it 24 channels, and too big to bring upstairs to the office. So... I'm seeing a signal in "Volume Control > Input Devices," until I start Jack.
[01:49] <craigbass76> Scratch that. I've set (in QjackCtl) the Settings > Interface to default, and now I can see the VU meter moving in Volume Control. Just can't hear anything.