=== brainwash_ is now known as brainwash
[01:31] <RoadRunner> having problems connecting a printer to xub 16.04; troubleshooter says  'The CUPS print spooler does not appear to be running. To correct this, choose System>Administration>Services'. Where is that?
[01:47] <RoadRunner> problems connecting new printer to xub 16.04; printer troubleshooter says CUPS service isn't running. Where do I find 'Services' to start it?
[02:08] <RoadRunner> anybody in?
[02:09] <well_laid_lawn> RoadRunner:  generally there's people about
[02:09] <well_laid_lawn> but not everyone can answer every uestion
[02:10] <RoadRunner> well_laid_lawn: do you know where Services are hiding?
[02:12] <well_laid_lawn> RoadRunner:  serices are handled by systemd
[02:13] <well_laid_lawn> !systemd
[02:13] <ubottu> systemd is the default init system for Ubuntu 15.04 onwards. For information on transitioning from upstart to systemd, see https://wiki.ubuntu.com/SystemdForUpstartUsers For a guide to basic service management with systemd, see https://www.digitalocean.com/community/tutorials/how-to-use-systemctl-to-manage-systemd-services-and-units
[02:13] <well_laid_lawn> the second link has info for controlling services
[02:17] <RoadRunner> thank you, had a quick look through; is the only way to deal with this through terminal - no convinient GUI app?
[02:19] <well_laid_lawn> RoadRunner:  afaik no gui for services
[02:19] <well_laid_lawn> it is pretty straight forward though
[02:21] <RoadRunner> when I set up my xub 16.04 box, no printer was connected to it; perhaps that's why the needed service was disabled? on a new install with a connected printer, is the printer usually automaticaly set up without additional action by users?
[02:22] <well_laid_lawn> I nevver use a printer so I can't say
[02:22] <well_laid_lawn> but enabling and starting the cups service should be an easy start to sorting that out
[02:23] <well_laid_lawn> !printing
[02:23] <ubottu> Printing in Ubuntu is done with cups. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://linuxprinting.org - Printer sharing: https://help.ubuntu.com/community/NetworkPrintingWithUbuntu
[02:29] <RoadRunner> thank you :)
[02:29] <well_laid_lawn> luck
[02:39] <RoadRunner> well_laid_lawn: hmm, not much luck so far... to: 'sudo systemctl start cups.service' get 'Failed to start cups.service: Unit cups.service not found.
[02:41] <well_laid_lawn> youu have to enable a service before starting it
[02:41] <RoadRunner> ah
[02:41] <well_laid_lawn> did you follow the printing links above ?
[02:47] <RoadRunner> not yet, just your second link so far; but regarding enabling: to 'sudo systemctl enable cups.service' get 'Failed to execute operation: No such file or directory
[03:09] <RoadRunner> well_laid_lawn: went through all of the links you suggested; my printer: brother hl-2040 was described by one user as working with xub 10  and both a driver and an install tool are available from Brother. But will do me any good if I can't enable 'cups'?
[03:10] <RoadRunner> *will it...
[03:12] <well_laid_lawn> RoadRunner:  I was afk. you might have to install cups - Lie I said I don't use a printer
[03:12] <well_laid_lawn> maybe someone else can help with that in a bit
[03:16] <RoadRunner> thanks anyway :); cups -Lie is full name of the package? Synaptic tells me I don't have it installed, so I gess I'll grab it from there
[03:17] <RoadRunner> just suprprised it wasn't installed during the original install automaticaly...
[03:19] <kryten> I'd check for "cups" though, "Lie" was just a misspelled "Like"..
[03:20] <kryten> And fwiw, Xubuntu 16.04 is end-of-life for about a year now.
[03:21] <RoadRunner> kryten: "Lie" lol - stupid me :) and yes I'll be transitioning to 20 when it becomes available.
[03:26] <Bashing-om> RoadRunner: 20.04 is up for testing now: https://lists.ubuntu.com/archives/ubuntu-release/2020-April/004948.html
[03:30] <RoadRunner> Bashing-om: 20.04 is bleeding edge now; for now I just want to print with what I have and according to Synaptic I do have some cups stuff installed yet can't seem to enable that service
[03:31] <Bashing-om> RoadRunner: Not too up on what it takes to enable printing, sorry :(
[03:32] <RoadRunner> kryten: any suggestions on what may be preventing me from enabling cups?
=== cmcmanis is now known as chuckm
[09:11] <xu-help44w> I am having issues with HDMI Audio
[09:11] <xu-help44w> It shows unplugged
[09:11] <xu-help44w> no matter what
[09:11] <xu-help44w> but the video is working
[09:14] <diogenes_> xu-help44w, run: inxi -G | nc termbin.com 9999
[09:15] <diogenes_> share link
[09:15] <Unit193> -c0 will strip colors and make it easier to read.
[09:16] <diogenes_> inxi -Gc0 | nc termbin.com 9999
[09:16] <diogenes_> thanks Unit193
[09:17] <Unit193> Glad to be of help.
[09:18] <xu-help44w> Graphics:  Card: Advanced Micro Devices [AMD/ATI] RS780M [Mobility Radeon HD 3200]           Display Server: x11 (X.Org 1.20.5 )           drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)           Resolution: 1920x1080@60.00hz           OpenGL: renderer: AMD RS780 (DRM 2.50.0 / 5.3.0-45-generic, LLVM 9.0.0)           version: 3.3 Mesa 19.2.8
[09:18] <xu-help44w> https://termbin.com/zskr9
[09:19] <diogenes_> xu-help44w, look in pavucontrol > configuration
[09:21] <xu-help44w> It shows
[09:21] <xu-help44w> Digital Stero (HDMI) Output (Unplugged)\
[09:22] <diogenes_> there are many options with HDMI.
[09:22] <xu-help44w> all HDMI options are showing as unplugged
[09:23] <diogenes_> xu-help44w, has it ever worked with linux?
[09:23] <xu-help44w> haven't tried it before
[09:26] <diogenes_> xu-help44w, maybe this could help: https://askubuntu.com/questions/1032811/ubuntu-18-04-no-hdmi-audio-with-amd-radeon-hd-7870
[09:32] <xu-help44w> tried it
[09:32] <xu-help44w> but doesn't help
[09:36] <xu-help44w> Reboot after the changes helps though
[09:37] <xu-help44w> sound is working now.
[09:37] <xu-help44w> Thanks for the help
[09:37] <diogenes_> xu-help44w, what command worked?
[09:38] <xu-help44w> pacmd
[09:39] <diogenes_> ok good to know.
[09:39] <xu-help44w> mkdir -p $HOME/binecho '#!/bin/bash# Temporary workaround to restore HDMI until kernel is fixed## Paste at command line:#    aplay -l | grep HDMI## Example return:#    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]# That is card 1, device 3 so "1,3" and "_1_3"## If actual numbers are different than example, replace# the "1,3" and "_1_3" in
[09:39] <xu-help44w> lines below with the returned numbers.#pulseaudio --killrm $HOME/.config/pulse/*waitpacmd load-module module-alsa-sink device=hw:1,3pacmd set-default-sink alsa_output.hw_1_3pacmd set-sink-volume alsa_output.hw_1_3 35000' > $HOME/bin/fixHDMIaudiochmod +x $HOME/bin/fixHDMIaudioechocat $HOME/bin/fixHDMIaudio
[11:21] <MoogusShow> Hullo. Is there a difference between installing the 20.04 daily now and waiting until the official release? I have used the daily on a virtual machine, but I want to go ahead and install it for real.
[11:27] <Unit193> Technically there could be slight differences between if you installed now and installed with the final, but...Not dramatic.
[11:28] <MoogusShow> But, I won't have to install the official release, I can just keep updating, right? Sorry for the very basic question.
[11:30] <Unit193> Yeah.
[11:31] <MoogusShow> Thank you. :-[
[11:45] <jphilips> Two more days left in the #UbuntuTestingWeek, so all those interested to help improve the stability of this month's Xubuntu 20.04, please read this - https://xubuntu.org/news/xubuntu-20-04-testing-week/
[14:32] <Sumit44> i use xubutu, i want to transfer file from windows 10 to xubuntu through ethernet cable
[14:32] <Sumit44> is it possible if yes pls help/guide. shall be grateful
[14:36] <Sumit44> =L
[14:41] <Sumit44> !! pls help
[15:32] <ernalve> Hi, I'm receiving unwanted notifications with ads on the panel. How do I delete this? Is it malware? I have a screenshot if it helps.
[15:35] <diogenes_> ernalve, screen.
[15:40] <ernalve> https://imgur.com/a/xp2BVSg
[15:43] <diogenes_> ernalve, maybe it's from twitter, i don't habla espagnol.
[16:07] <sumit333> i use xubuntu i wanted to know can i transfer files from windows 10 to this xubuntu.
[16:07] <sumit333> if possible pls help/guide
[16:07] <sumit333> throgh ethernet cable
[16:08] <diogenes_> sumit333, with samba.
[16:08] <diogenes_> !samba
[16:08] <ubottu> Samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and https://help.ubuntu.com/lts/serverguide/samba.html
[16:13] <genii> It is also now possible to enable NFS in Windows
=== mp107_ is now known as mp107
[18:44] <Hamilton> I'm getting accidental selection on right-clicking stuff...On rightclick the menu appears but it immedeatly selects the entry which my mouse is on
[18:45] <Hamilton> https://bugzilla.gnome.org/show_bug.cgi?id=591258#c79
[18:45] <ubottu> Gnome bug 591258 in Widget: GtkMenu "Easy to accidentally select first option in popup menus" [Minor,Resolved: obsolete]
[19:15] <Gunstick> greetings. 2 days ago I was here about lz4 in mkinitrd, well my repair did not work. system is unbootable. kernel panic "unable to mount root fs on unknown-block(0,0)"
[19:15] <Gunstick> tried to set up grub, wiith no effect
[19:16] <Gunstick> it is an full disk encrypted lvm
[19:37] <xu-help8w> i use xubuntu, i wanted to know can i transfer files from windows 10 to this xubuntu. if possible pls help/guidethrogh ethernet cable
[19:39] <Gunstick> for m above problem, trying this: https://askubuntu.com/questions/844132/how-to-repair-boot-on-luks-encrypted-harddrive
[19:39] <Gunstick> xubuntu can mount windows shares. that's probably the easiest way
[19:39] <xu-help8w> how to setup
[19:40] <Gunstick> xu-help8w: that on xubuntu the File Manager
[19:40] <Gunstick> I cannot tell you how to set up windows to do a file share.
[19:41] <xu-help8w> pls help i am novice
[19:41] <Gunstick> maybe someone else can help but best idea is to ask in a windows group how to create a share on your network.
[19:43] <xu-help8w> windows share if i do can i view it in xubuntu
[19:43] <Gunstick> yes
[19:44] <xu-help8w> in which forum i need to ask for setup of windows share
[19:45] <Gunstick> The last time I installed a windows was in 1995, so sorry
[19:46] <xu-help8w> ....
[19:47] <xu-help8w> xUbuntu to xubuntu can it be possible
[19:47] <xu-help8w> i mean both the pcs same od
[19:48] <xu-help8w> os
[19:49] <Gunstick> yes
[19:57] <Hamilton> Gunstick, What exactly do you want?
[19:58] <Hamilton> Do you want to for example share a directory over local WiFi network so files are accessible on browsers?
[19:58] <Gunstick> It is not me but xu-help8w who wants that
[19:58] <Gunstick> (I am still working on solving my kernel panic with grub)
[20:00] <Gunstick> lol, now it wants to boot from the live-install I used to reconfigure grub!
[20:36] <Gunstick> I guess this is my issue: no cryptsetup in initramfs, despite root being encrypted. why isn't cryptsetup by default copied to initramfs if there is an issue to make it work reliably? https://askubuntu.com/questions/381624/lvm-on-encrypted-partition-drops-me-to-initramfs-root-missing
=== zChris_ is now known as zChris