[03:30] Hi Everyone! I have a probem with OTA updater on PinePhone. I had version 45, then downloaded version 46 but I didn't install it until today. Apparently, version 47 has downloaded so when update was finally installing version 46 it also installed version 47. Now I'm apparently on version 47 but GUI updater application show that Update 46 is downloaded and ready to install. [03:31] How can I get rid of Update 46 in the updater application? Is there a way to clear its cache? [17:53] crash or freeze? [17:53] @Sam Hanna [do have 2fa set up?], No [17:53] it's working on my oneplus one [17:55] Crash. Sometimes UT reboots, sometimes DK crashes ante thatβ€˜s all. Cleared the DK .cache too, but it does not help. [18:29] @erfanoabdi [], awesome picture! It's a beautiful sight to see new devices running UT. [19:46] @erfanoabdi [], πŸ™ƒπŸ™ƒ [19:49] @erfanoabdi [sure … Moto Z 1gen … Moto Z2 Force … Moto G7 … Galaxy S9 … Redmi note 7], Is the S9 usable? Or still not ready for a daily driver? [19:54] @Anghirrim [Is the S9 usable? Or still not ready for a daily driver?], It's 90% ready [19:54] Fwd from erfanoabdi: sorry for off-topic but i'll just share it here once since there's no other 9810 that i'm aware of … steps of installing ubports on S9 (starlte): … 0) Boot to TWRP … 1) Format data … 2) Flash vendor: https://build.lolinet.com/file/halium/starlte/vendor.img … 3) Flash halium-boot: https://build.lolinet.com/file/hal [19:54] ium/starlte/halium-boot.img … 4) Flash firmwares: https://build.lolinet.com/file/halium/starlte/starlte-firmwares.zip … 5) Flash ubports GSI: https://build.lolinet.com/file/halium/GSI/ubports_GSI_installer_v8.zip … 6) Flash Samsung USB fix: https://build.lolinet.com/file/halium/GSI/tools/samsung-usb-tethering.zip … Bugs: … 1) Audio incall … 2) Mob [19:54] ile data (not sure about this) [19:57] @erfanoabdi What abut nash, what doesn't works? [19:58] @IuriJ30 [@erfanoabdi What abut nash, what doesn't works?], Mobile data broken on nash [19:59] It will probably work if someone redo kernel from moto sources [19:59] Ok, that ok. I will try then. [20:00] same as s9 steps to flash? [20:00] @erfanoabdi [It's 90% ready], Cool, is it usable to port for the S9+? I have a friend willing to use UPPorts, but he has a S9+ [20:01] He really wants to use convergence, so want to stick to a phone that has slimport or similar available [20:01] @IuriJ30 [same as s9 steps to flash?], No nash is easier: … Format … Gsi … Halium boot … Console patch zip … Apparmor enabler zip [20:01] When I say usable, I mean, sources and optimizations. Of course, I understand that Halium 9 must be ported to the S9+ [20:03] @Anghirrim [Cool, is it usable to port for the S9+? I have a friend willing to use UPPorts, …], Unfortunately i don't have s9+ so i didn't build vendor and halium boot for that device but my sources is all available in my GitHub … He can build himself [20:03] Yep [20:04] Was it complex to port on S9? [20:04] Actually it's usable only a few ril bugs left that i might look into them later.. [20:04] Should we expect huge or similar difficulties? [20:04] @Anghirrim [Was it complex to port on S9?], Nope … I can explain to you later.. [20:04] U don't need to build halium BTW [20:04] Just build lineage 16 [20:05] ?????? [20:05] Not even the halium-boot? [20:05] Halium boot can be done from lineage16 source too [20:06] Basically u want lineage 16 vendor to boot GSI [20:11] Yes, this I got. But star2lte is not a LOS official device [20:11] I'll check if there are sources available somewhere [20:11] But definitely not in Lineage github [20:11] friends, this isn't @halium :) [20:12] SorryπŸ™ [20:12] @dohbee [friends, this isn't @halium :)], Oups yes sorry [20:12] Last time I saw Erfan, was on Halium TG. So I did not even look at the upper side of my screen. πŸ˜‚πŸ˜‚ [20:15] For the next OTA update you could try to implement a first boot animation like the one in the XPS 13 Ubuntu Edition. https://www.youtube.com/watch?v=apx_HyxFqjA [20:16] you can make something and submit a PR if you want [20:17] but that is way too complicated and long [20:43] @Pascal [Crash. Sometimes UT reboots, sometimes DK crashes ante thatβ€˜s all. Cleared the D …], Regarding Dekko on Pinephone... Theres already an issue for that: https://gitlab.com/dekkan/dekko/-/issues/84 [20:45] Although it might not be a bug in dekko, maybe better join the dekko user group for further discussions and debugging to keep the noise low here [20:46] https://t.me/DekkoUsersGroup [21:13] (Photo, 640x480) https://irc.ubports.com/0F09LWIA.png [21:13] (Photo, 640x480) https://irc.ubports.com/K7QXYvAN.png [21:15] usb camera (and microscope) now working on the Raspberry Pi running Ubuntu Touch. [21:18] [Edit] USB camera (and microscope) now working on the Raspberry Pi running Ubuntu Touch. Photos taken using the camera app. [22:01] Which channel is the most stable that still supports Anbox on OnePlus One? Is it still on Devel? [22:04] stable is obviously the most stable channel [22:05] Good night is someone know about multiroom? [22:05] Or hello? πŸ˜‚ [22:05] multirom is not supported [22:05] So definitely not supported? [22:05] I mean [22:06] Impossible to do? [22:06] i mean, system updates don't work with it and we do not support running UT on it [22:07] some people may have gotten an image booting with it on their device, but it's a "you break it and it's all yours" sort of thing [22:08] So it's possible to dual boot but I cannot update? [22:09] it depends on your device, requires a patched version of multirom, and no updates won't work for UT with it. as i said, it's unsupported [22:10] please don't PM people without permission [22:11] Sorry [22:11] you cannot use multirom on bq devices [22:11] OK thanks [22:12] sigh why do people ask things, have a conversation, and then delete all their messages for no reason [22:13] no need for that [22:13] Oh I'm sorry to don't ask permission [22:14] And I deleted them because I was ashamed [22:14] louis: the conversation is important to ubports, it builds the knowledge base [22:15] never be ashamed to learn :) [22:16] Well... [22:16] My question was dumb [22:16] so? [22:17] also i did learn about ubports and multiboot because of it... [22:17] So I removed everything out of shame that's all [22:18] it wasn't dumb [22:18] no need to shame, be proud you taught people :) [22:19] i think it was a good question, i didn't even think it could be an issue... [22:19] I forgot to ask permission before I went to speak in private and I was ashamed of it and I'm feel dumb [22:19] ow, i cannot see what exactly you deleted [22:20] nothing to be ashamed of really [22:20] it is better to try and find out, than to just give up. now everybody remembers PM can be too much for some. [22:20] thanks Louis! [22:21] I'm just going to talk to nan privately forgetting to ask permission and I was ashamed ... [22:21] as i said before, no need for shame just because you missed some etiquette rule :) [22:22] @dohbee [nothing to be ashamed of really], For me a little [22:22] as a pennance, you can answer someone elses question soon :P [22:23] @ikmaak [as i said before, no need for shame just because you missed some etiquette rule …], Well for forgetting it makes me feel ashamed [22:23] and there's nothing wrong with bearing a little shame every one in a while to learn something new [22:23] nobody else cares so much about it :) [22:23] Louis: no need, it is not the norm on the internet to be ashamed for the wrong move in earnest. So i understand cultural norms, but the internet has different norms! :) [22:23] anyway, i don't think we need to keep discussing it further at this point [22:24] yes [22:24] would ubports rpi4 work with the official touchscreen? [22:25] @dohbee [anyway, i don't think we need to keep discussing it further at this point], Yes I think to πŸ˜… [22:26] well, i did not even know you could delete chats :( [22:27] @ikmaak [would ubports rpi4 work with the official touchscreen?], when UT works on pi4 i guess touchscreen should theoretically work, though apparently there are issues with edge swiping on the pi touch screen on pi3 [22:27] @ikmaak [well, i did not even know you could delete chats :(], Happy that for once I could help someone πŸ˜‚ [22:28] louis: 2nd time already! [22:29] dohbee: that is strange. i think this issue would then also happen with pi4 [22:30] it has 10x multitouch... so should also be capable of recognising swipes [22:30] but maybe it is just the edge thing that is handled differently [22:36] @ikmaak [dohbee: that is strange. i think this issue would then also happen with pi4], It's only the raspberry pi 4? [22:36] @dohbee [stable is obviously the most stable channel], I mean, does it have Anbox support yet? Or do I still use the Devel branch? [22:38] I'm setting up a device for a friend and need to know which branch supports the anbox img for "bacon" [22:38] @nerd7473 [I mean, does it have Anbox support yet? Or do I still use the Devel branch?], technically no UT images have "anbox support" yet. it is an experimental feature and not part of the default images. if you mean just the kernel module support part, i don't know. just try to set up anbox on stable, and if it doesn't work, switch to a [22:38] different channel and try there? [22:39] afaik though, there is no separate boot img that needs flashed any more on op1 or nexus5 at least [22:39] Louis: i only have a pi4 with the screen.... [22:39] @ikmaak [Louis: i only have a pi4 with the screen....], No I mean [22:40] Is it possible on raspberry pi 3? [22:40] Or 3 plus? [22:40] Or 3b [22:40] @dohbee [technically no UT images have "anbox support" yet. it is an experimental feature …], Got it, I'll start off with Stable and wok forewards if the img doesn't work right. [22:40] it seems there is issues in pi3, and noone has tried on 4 yet [22:41] i do not know any more than doh_bee told us. [22:44] @ikmaak [it seems there is issues in pi3, and noone has tried on 4 yet], Oh OK 😊 [22:45] When mouse selection was badly broken on Ubuntu Touch on the Pi 3B+ I found the touchscreen was vital to get anywhere. Selection was mostly fine but edge swipes and pulling down menus would not work so I needed to use the mouse too. Too much plugging and unplugging means the connector for touchscreen is no longer working on my Pi 3 so [22:45] I can't test at present. [22:47] so it could be it is already fixed. how long ago were your tests? [22:48] @ikmaak [it seems there is issues in pi3, and noone has tried on 4 yet], There is a significant graphics issue on the Pi 4, we can test things like wifi, sound and bluetooth using ssh but can't yet use the gui :( [22:49] ow. is there info i could provide? i got one right here [22:52] Someone tried around three weeks back. [22:53] ok, i expect someone else will be more knowledgable then. i just got the setup pi4&tscreen setup, it would just need a reboot... [22:55] @ikmaak [ow. is there info i could provide? i got one right here], The Pi group has lots of discussion and the pinned post should have enough info to get you started. https://t.me/UBports_pi [22:57] i hope it is also somewhere in wiki or forum. i got no telegram, and am here via irc.. [23:01] but ill find it. maybe things have improved once i get around to it :) [23:03] DMR Yuliya was added by: DMR Yuliya [23:04] @ikmaak [but ill find it. maybe things have improved once i get around to it :)], https://ubports.com/blog/ubports-blog-1/post/raspberry-pi-266 [23:06] (Photo, 1280x720) https://irc.ubports.com/V2vXv43a.png [23:09] @MenmuirMark [], Screenshot from Pi 4 running UT - you cannot even see that but if you login then press PrtSc it records what you should see. :( [23:19] i read that one, but it only states 'once issues are sorted the 2-4GB Pi 4 will run UT much more smoothly.' [23:20] wow, strange that it only happens to the window, not the top bar [23:22] RohbsonS was added by: RohbsonS [23:24] 'Touch screen works quite well if you are lucky enough to have one and makes selection so much easier.' sounds like a good sign. [23:38] @hummlbach [https://t.me/DekkoUsersGroup], It’s exactly the problem i encounter. Thank you ! [23:57] Hossain Mary was added by: Hossain Mary