[01:03] abd el was added by: abd el [01:34] Ya idk how to boot this 😂, Gonna wait for official release [01:46] Could anyone point me to the location in filesystem of a teleports download (pinephone in case it matters...)? [01:49] Ah... Found it: home/.local/share/teleports.ubuntu/files/documents [01:57] so I managed to get my device to reboot to download mode using the ubports installer, now I gotta figure out how to get it to use heimdall to flash recovery, @neothethird is there a way to do that currently? [02:10] I have installed UT in LG Nexus 5. It work really fine !! I have two questions: 1) Does it exist a kind of bleachbit (or ccleaner) here ? I tried in a terminal "sudo apt clean && sudo apt autoclean” and it did'nt work. 2) How configure correctly and independently my cameras ? I tried to change the camera configuration but it w [02:10] as both configurations at the same time. Thanks in advance . You are doing a great job !! Congratulations !! Greetings from Tucuman, Argentina [02:28] @Anony Izu [Is xiaomi redmi note 7 port working now?], yes, but not ready for end user [02:34] @Alejandro Olivencia [I have installed UT in LG Nexus 5. It work really fine !! I have two questions: …], 1) no. and apt clean/autoclean aren't for deleting application data, and also apt is not supported as the rootfs is readonly. 2) i'm not sure what you mean by that. the "configuration" inside the camera app is for the app, not the hard [02:34] ware [03:16] @Shakendo [so I managed to get my device to reboot to download mode using the ubports insta …], I hope you're taking notes. [03:18] once I get it figured out myself I will, speaking of, did my notes help ya? [03:42] @Shakendo [once I get it figured out myself I will, speaking of, did my notes help ya?], Not really. I think I understand them but the whole process is just too foreign to me. I'm hoping to get a better look tomorrow or Friday. [04:01] ok, the key is the device.tar.xz file, and the commandfile [04:52] anyone playing Gearboy? … do you also experience where a save state crashes the app or stuck and seems corrupted? [04:53] mohalamalhuda was added by: mohalamalhuda [05:58] Hey! ive been playing with ubuntu touch recently (oneplus6t, halium9, gsi v8) and ive noticed that i'm unable to change date or timezone [05:59] Even after i've edited /etc/timezone to Europe/Warsaw and rebooted phone it still remain unchanged in settings [06:05] @Shakendo [so I managed to get my device to reboot to download mode using the ubports insta …], No, not yet. I need a device to test writing a wrapper, or someone to help with it [07:12] Ahoy, anybody else on Version 845 from the Edge Channel on a Nexus5? I cannot lock the screen with the power button anymore 😄 Rebooting by pressing the button longer still works, but I cannot turn off the screen anymore and lock the phone [07:12] It's not my primary phone, so I don't care that much, just wanted to see if there's anybody else or if it's my phone in particular [07:16] HR Bot was added by: HR Bot [07:34] Hk was added by: Hk [07:35] Lo was added by: Lo [08:00] I want to install Ubuntu touch on Samsung galaxy tab 2 p3100 . please guide. [08:01] @rahul [I want to install Ubuntu touch on Samsung galaxy tab 2 p3100 . please guide.], I don't think there is a port for that device [08:07] What is meaning of port [08:15] @rahul [What is meaning of port], A port is a version of Ubuntu Touch specifically tailored for a device. When someone says "There's no port for that device" that means that there's no version that will run on that device yet. It hasn't been _ported_ [08:32] Raj Raunak Kumar was added by: Raj Raunak Kumar [08:33] Hey Is Ubuntu Convergence feature available on OnePlus One? [08:48] @Raj Raunak Kumar [Hey Is Ubuntu Convergence feature available on OnePlus One?], good question, i want to know too. [08:48] @mohalamalhuda Seems you have Galaxy Star GT-S5282 (Galaxy Star Duos)? [08:49] I know a dev which is fighting with that phone, may you contact him directly? [08:50] @Raj Raunak Kumar [Hey Is Ubuntu Convergence feature available on OnePlus One?], Yes via miracast AFAIK [08:50] But its slow and not usable atm [08:50] P.S. not about Ubports thing, sorry... but I need find that man with own GT-S5282 [08:50] Also you will need an adapter [08:52] The nexus 5 and the BQ tablet are the only devices with slimport out ready for “ convergence“ [08:52] The pinephone hardware has issues with the actual board [08:53] [Edit] I know a dev which is fighting with that phone, may you contact him directly? His ID is @TipzTeam [09:12] GitDeen was added by: GitDeen [09:26] @stuarttempleton Released a new version of Podbird to the store, can you give it a quick test when you have a moment and check it fixes the issue for you? (I don't currently have access to a UBPorts device) [09:38] Gaaaaayaaaaaaaaaaayaaaaa (in excitement) [10:03] PtSurajShukla was added by: PtSurajShukla [10:05] I am not finding Nexsus 5 anywhere. [10:10] Carlos was added by: Carlos [10:11] @Raj Raunak Kumar [I am not finding Nexsus 5 anywhere.], Aliexpress, they've got more than available 100 pieces [10:12] @Raj Raunak Kumar [I am not finding Nexsus 5 anywhere.], [Edit] Aliexpress, they've got more than 100 available pieces [10:12] @Steve Kueffer [Aliexpress, they've got more than 100 available pieces], How much? [10:12] Around 100$ [10:14] Oh too much for me lol [11:08] Podbird won't retrieve any results for podcasts no matter what I search. (on pinephone) [11:10] when adding or searching added subscription? [11:47] adalbertbialek was added by: adalbertbialek [12:45] @Javacookies [when adding or searching added subscription?], I try to add and it tells me to use the magnifying glass button so I click that and search and no results are given. Maybe I'm doing it wrong somehow... [12:45] @Javacookies [when adding or searching added subscription?], [Edit] When trying to search for a podcast to subscribe to, I try to add and it tells me to use the magnifying glass button so I click that and search and no results are given. Maybe I'm doing it wrong somehow... [12:45] Fwd from B: In my difficult time I was so much confused that I don't have much income to take care of my responsibilities. Until my friend introduced me to this good and trustworthy woman who bring peace in my life today I advice you today to follow her below Dm ✍️ … https://t.me/joinchat/AAAAAEXIgsK7TNRlVzO6DA [12:45] Otherwise I was really surprised that it had most of the features I loved about antennaepod. [12:46] How do you report spam here? [12:46] [Edit] How do you report spam here? … Nevermind I found the report button [12:47] @Steve Kueffer [Around 100$], Is the nexus 5 still a usable device? Seems like it would be awfully slow since it's nearly, what, 10 years old almost? [12:49] And will the 5x run UT? [12:49] @Cameron [And will the 5x run UT?], No [12:49] @Cameron [Is the nexus 5 still a usable device? Seems like it would be awfully slow since …], pinephone is slower lmao [12:50] @vtsoft [pinephone is slower lmao], One is completely open [12:50] the other has issues [12:50] Fwd from Good Gof: In my difficult time I was so much confused that I don't have much income to take care of my responsibilities. Until my friend introduced me to this good and trustworthy woman who bring peace in my life today I advice you today to follow her below Dm ✍️ … https://t.me/joinchat/AAAAAEXIgsK7TNRlVzO6DA [12:51] @Cameron [Is the nexus 5 still a usable device? Seems like it would be awfully slow since …], My nexus 4 is still usable under Android, only reason I upgraded was because newer apps wouldn't run it. I'm sure the newer nexus 5 will be good enough. [12:52] Nexus 5 running UT is nicer to use as a device than Android on it, in my experience. The only reeeaaaal issue to me is how Morph performs on it, compared to Chrome on Android on it. [12:52] @Cameron [Is the nexus 5 still a usable device? Seems like it would be awfully slow since …], Nexus 5 is gives one of smoothest experience with UT [12:52] That said, it's still a decent little phone on both platforms. [12:53] @Cameron [When trying to search for a podcast to subscribe to, I try to add and it tells m …], hmmm, it did work on mine. I was able to subscribe to a couple of them [12:57] Vlastimil Morávek was added by: Vlastimil Morávek [12:57] Hello [12:58] Please help on Ubuntu touch [12:58] How to install it on an unsupported device? [12:59] You can't install without a port [13:00] @Daniel [Nexus 5 running UT is nicer to use as a device than Android on it, in my experie …], I would love for it to switch over to Mainline [13:01] @mimecar [You can't install without a port], Why? Could it just unlock the bootloader, and somehow boot from the PC? [13:01] No [13:02] Every device needs a new port [13:02] @Vlastimil Morávek [Why? Could it just unlock the bootloader, and somehow boot from the PC?], What's the name of the "unsupported device"? [13:02] Check on XDA. [13:03] @TigranKhachatryan [What's the name of the "unsupported device"?], Sony Xperia Z5 Compact [13:03] @TigranKhachatryan [What's the name of the "unsupported device"?], thank you [13:04] https://forums.ubports.com/topic/45/building-ubuntu-touch-image-for-sony-xperia-z5-compact You might want to see this discussion [13:09] @TigranKhachatryan [https://forums.ubports.com/topic/45/building-ubuntu-touch-image-for-sony-xperia- …], oh yes, thank you [13:10] @jja2000 [I would love for it to switch over to Mainline], Pinephone then [13:10] @Stereofont [Pinephone then], No I specifically mean Hammerhead [13:11] @jja2000 [No I specifically mean Hammerhead], That has an ancient Android kernel unfortunately [13:12] @Stereofont [That has an ancient Android kernel unfortunately], It has had a mainline port foryears [13:12] @Stereofont [That has an ancient Android kernel unfortunately], [Edit] It has had a mainline port for years [13:12] and it works fine [13:12] You mean Postmarket OS? [13:13] @Stereofont [You mean Postmarket OS?], Kernel is seperate from the OS [13:14] Just like you're using the "ancient android kernel" for halium [13:19] @TigranKhachatryan [https://forums.ubports.com/topic/45/building-ubuntu-touch-image-for-sony-xperia- …], so I'm trying ... nothing yet [13:32] I managed to unlock the bootlauder [13:34] sarahcumslut was added by: sarahcumslut [13:37] They are going to download Ubuntu Touch files somewhere? [13:45] @MikeSheldon [@stuarttempleton Released a new version of Podbird to the store, can you give it …], Playback speed is now 1x! Yay! [13:57] < [13:57] < [13:57] ? [13:58] I noticed thst this update was available in the openstore but my settings update didn't list it, today. [14:04] please help https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/how-to-unlock-bootloader/#tutorial-step-3 [14:15] @stuarttempleton [Playback speed is now 1x! Yay!], Great :) [14:15] @MikeSheldon [Great :)], Thanks, Mike! [14:15] @stuarttempleton [Thanks, Mike!], you're welcome :) [14:21] @neothethird [No, not yet. I need a device to test writing a wrapper, or someone to help with …], I gladly volunteer my device then [14:26] Adesh Patil was added by: chetanbadhe [14:45] Aadarsh Jane was added by: Aadarsh Jane [14:46] @jja2000 [and it works fine], when I looked at it there were a few features not working [14:47] Vltngry was added by: Vltngry [14:53] @Shakendo [when I looked at it there were a few features not working], It's working kinda well, GPU problems are slowly getting phased out [14:54] it isn't on par with android drivers though. and getting a bit off topic for here :) [14:57] indeed, but nice to know they're still working on it [15:21] Aanonnymous was added by: Aanonnymous [15:23] (Photo, 1280x813) https://irc.ubports.com/f2jeen6Q.png https://t.me/joinchat/AAAAAFiCGfAgAwW0Wiu5Hw [15:24] @UniversalSuperBox spam [15:25] Hello … I am a programmer and i know c/c++/javascript … I had seen that ununtu touch i an open source project and anyone can contribute in it . … Can anyone guide that how i can start ? [15:26] @Aanonnymous do you have a device with Ubuntu Touch already? [15:26] @NotKit [@Aanonnymous do you have a device with Ubuntu Touch already?], Yes [15:26] well theres no list per-se, but the best way to contribute is to pick something you want to work on and go from there, github has a list of open issues as well [15:26] that's a recent response from Dalton to a similar question [15:26] Fwd from UniversalSuperBox: I'd say, find something that bugs you in one of the preinstalled apps. They're easiest to download, rebuild, and release, so you'll see a faster turn-around time for your fix. They're also smaller and easier to find problems in. Known quantities, as it were. [15:26] Fwd from UniversalSuperBox: If it isn't something that bugs you personally, you probably won't have the follow-through on it. Not a dig at you, just how things tend to go [15:26] @Shakendo [well theres no list per-se, but the best way to contribute is to pick something …], Ok [15:27] @NotKit [If it isn't something that bugs you personally, you probably won't have the foll …], Om [15:27] Ok [15:28] I will go for native apps like messeging and contack aap [15:28] Because i think that a good ui attracts users [15:28] Thnks for helping [15:31] Vighnesh Ramachandran was added by: Vighnesh Ramachandran [15:33] @Aanonnymous [Hello … I am a programmer and i know c/c++/javascript … I had seen that ununtu to …], This will maybe help you to get started too: https://docs.ubports.com/en/latest/appdev/index.html [15:34] Clickable is the tool for general apps that get shipped as click packages. [15:35] @Aanonnymous [I will go for native apps like messeging and contack aap], or you can also check if there's any part of the OS that you think you can improve and/or fix bugs. [15:57] @Aanonnymous [I will go for native apps like messeging and contack aap], good point, and easy to test and build. [15:57] but you will not find much c/c++ there [15:57] I know javascript [15:58] And some python [15:58] After that i can switch to any framwork easily if needed [15:58] QML / javascript mainly for core apps [15:58] @lduboeuf [QML / javascript mainly for core apps], Ok [15:59] and c/c++ for lower parts, services, components, etc... [15:59] Am jus going through the whole lot documentation and all [15:59] @lduboeuf [and c/c++ for lower parts, services, components, etc...], Ok [15:59] 👍 [15:59] documentation is sparse, don't hesitate to improve it as well :) [16:00] the keyboard has plenty of C++ parts … it needs improvements especially auto-corrections and stuffs 😄 [16:00] 👍 [16:00] 200000 things to do :) [16:01] a hundred billion red barchettas floating across the sky [16:01] yeah at least :) [16:11] @Aanonnymous [Ok], core apps here: https://github.com/search?q=topic%3Acore-app+org%3Aubports&type=Repositories [17:05] How to install on redmi 4a [17:08] Any update for redmi note 4 [17:09] @Fauzan [How to install on redmi 4a], ?? [17:09] https://devices.ubuntu-touch.io [17:29] Edegardo was added by: Edegardo [19:32] Hi everyone, my Pinephone UBports CE does not have cellular data, the toggle in settings does not work, is there something I'm missing? [19:33] I am on devel repository and the last time I updated was this morning [19:36] Is there a way to revertto a previous version of UT w/o reflashing? [19:37] New update really screwed up my WiFi and gave my speakers a hissing sound [19:37] technically no, because any change to the system image is "reflashing" [19:38] but if you now the build number to install, you can ssh/adb into the phone and use `system-image-cli` to switch to a specific build; though i think it doesn't work currently when switching to an older build in the same channel [19:40] Yeah that sounds out of my league. Dang, I shouldn’t have touched it! I’m an iPhone user. I know better than to update anything on day one. [19:45] just switch to stable channel i guess [19:57] stable channel just jumped to #3, which is the same as dev today... [19:59] build numbers are not consistent across all devices, and all devices did not have stable channel updates today [20:20] i was talking about the pinephone, as were the two people before me that you gave the stable channel tip to [20:23] ok. well i can't keep track of what devices people are referring to when they don't mention them, especially when a lot of people have multiple different devices, and such problems are not necessarily limited to a specific device [20:24] i understand. [20:25] i just had my own issues with the new stable upgrade, so i noticed [20:25] and niffin just came out of another conversation on the pp chat [20:27] the nrs of the builds on pp are confusing anyway, as the dev channel and the img-builder are almost at the same nr. :) [20:28] yes, pinephone is still a bit special [20:28] it is great though [21:07] Sam Williams was added by: Sam Williams [21:24]

observation: when the display goes off by itself (auto suspend?) the music continues ok, when I turn the display off with the power button the music starts to be interrupted [21:33] Hello [21:33] What about cosmo communicator? Is there any port for it? [21:33] I am back [21:35] @vtsoft [What about cosmo communicator? Is there any port for it?], you can ask in @halium group if anyone is working on it i guess [21:38] So I managed to install ut on unsupported mo [21:38] Mobile [21:58] @Aanonnymous [Ok], Joining the app development group would be a good idea [22:00] they did long ago :P [22:00] 😁 [22:02] Sorry, when I mentioned my update woes I neglected to mention that I was running stable on the PinePhone. [22:03] Terraaqua was added by: Terraaqua [22:05] @Terraaqua [Terraaqua was added by: Petr], Hello [22:13] HI