[01:02] (Photo, 1080x1920) https://irc.ubports.com/80TGKnEE.png [04:20] Sometimes I am unable to send logs with logviewer too. Sadly I could not pinpoint a pattern yet. [04:27] it's working on my Nexus 5 … my username is `Ubuntu Touch User` 😄 [04:38] nvm, as I got that message, I can do a indirect way by copying those stuff to my PC then pastebin [07:31] Is ubtouch on nexus 5 faster than on pinephone in terms of just speed? [07:31] General speed, opening paps, etc [07:31] Apps* [07:40] in general, n5 is much matured and long-maintained since the start of this project, while pinephone is a new phone, should be a bit buggy and sluggish at start … in performance aspect, n5 is better not because of a high performance 32 bit processor(which should be a bit faster than A53), and has a better GPU, compared with crappy mali400 [07:40] and 40nm fabbed Allwinner A64 [07:41] @dohbee [configure your username in logviewer settings then you can send the log to a pas …], I've try my own way to put this log record to pastebin, feel free to diagnose it … https://paste.ubuntu.com/p/jqKNVCyJBf/ [07:42] @Dylan Gundberg [Is ubtouch on nexus 5 faster than on pinephone in terms of just speed?], and the only thing pinephone shines is its availability, pricing and friendly to flash other OS [07:43] @Dylan Gundberg [Is ubtouch on nexus 5 faster than on pinephone in terms of just speed?], on paper and their current state, Nexus 5 is a lot faster and smoother. But the Pinephone is still in its early development phase so it'll improve over time. Perhaps it'll be on par with Nexus 5 performance which I really wish will happen [07:43] Huh! Thank you for putting that in retrospect! [07:44] I'm going to be getting the 5 as well [07:44] [Edit] in general, n5 is much matured and long-maintained since the start of this project, while pinephone is a new phone, should be a bit buggy and sluggish at start … in performance aspect, n5 is better not because of a high performance 32 bit processor(which should be a bit faster than A53), but also a way better better GPU, compared w [07:44] ith crappy mali400 and 40nm fabbed Allwinner A64 [08:01] @twilipi [https://github.com/ubports/ubuntu-touch/issues/1237 … I guess that's an issue here], Using the test image worked. Shouldn't this be updated at docs.ubports.com? [08:01] ubports issue 1237 in ubuntu-touch "can not install anbox ,"Anbox kernel is not installed!"" [Closed] [08:02] @Guido [Using the test image worked. Shouldn't this be updated at docs.ubports.com?], currently at OTA 12 [08:03] @TotalSonic [I love my Meizu Pro 5 and think it is actually one of the very best options for …], I agree, it is one of the best options. However, I've always had problems with echos on audio calls, not on my side but on the other. Has this issue been fixed? [08:04] @Guido [Using the test image worked. Shouldn't this be updated at docs.ubports.com?], what kind of teest image is? currently mine is the latest OTA-12, via installer [08:05] No, I was talking about Anbox and the test image anbox-boot-turbo-test.img. [08:08] My post linked to my question why Anbox is no longer working on the Meizu Pro 5. And it is not if one is using the image anbox-boot-turbo.img as written in the docs but it is if one is using anbox-boot-turbo-test.img instead. [09:21] dvsk was added by: dvsk [09:33] itsaazim was added by: itsaazim [10:22] HarleyQuinn227 was added by: HarleyQuinn227 [10:24] Hey, I am really a newbie in porting, all I have done is creating TWRP recovery from source and I really want to build Ubuntu Touch for my device. Can Anyone provide me with a newbie friendly article/video to start with? [10:26] @HarleyQuinn227 [Hey, I am really a newbie in porting, all I have done is creating TWRP recovery …], Well you have to start on http://docs.ubports.com/en/latest/porting/introduction.html - which device is it, does it have official LinegeOS ? [10:27] Its a really old device probably 5-6 years old, It does not have LinegeOS build for it [10:28] @HarleyQuinn227 [Its a really old device probably 5-6 years old, It does not have LinegeOS build …], Without Lineage it will be harder, sometimes impossible. You need to find all needed sources yourself [10:28] Do I have to build that first? [10:28] No but it tells you what source code repos you need [10:29] I think i could build that It will take some time though [10:29] You need kernel, device and vendor repos to begin with. Often device and vendor consists of more than one repo. Also, it might be that you need to extract vendor blobs from a stock android installation [10:30] 5-6 years old? It was called cyanogenmod these days, did you look for that? [10:31] nah, Its a local phone [10:31] Hmm then it will be hard :) [10:32] well I could try following some LinegeOS building articles [10:32] yes your first question must be: How would a LineageOS build look for your device? What was the original Android version it came with? Can you even unlocxk the bootloader? Is it Mediatek? [10:33] Is it Huawei? 😆 [10:34] no, but close😂, I did build custom recovery for it so i guess i'll try building LineageOS [10:34] Thanks For all the information! [10:35] youre welcome [10:47] rockerdiaz was added by: rockerdiaz [11:17] Jonathan was added by: Jonathan [11:40] Hey guys, i'm try create muy Port to Xiaomi redmi 7 [11:42] Mm but muy device does not have linageos version [11:43] Android extended Is a valid ROM? [11:44] @rockerdiaz [Android extended Is a valid ROM?], AOSP extended? Just add the lineage stuff and make sure lineage boots before you try to get halium/ub touch working [11:44] Should be pretty easy [11:45] Any device tree is better than none, but if it's not LineageOS there might be some slight changes needed. [11:45] Ok, thx guys [13:04] how to increase screen on time [13:17] @rockerdiaz [Mm but muy device does not have linageos version], LineageOS has builds for Redmi 7. [13:17] @lordhacker0727 [how to increase screen on time], what do you mean? [13:18] @Fuseteam [what do you mean?], i meant how to increase screen time out in ubtouch [13:21] that should be i your settings [13:21] [Edit] that should be in your settings [13:37] @Fuseteam [that should be in your settings], cant found [13:38] where are you looking? [13:48] in battery settings [13:50] @mateosalta [in battery settings], ok [15:14] can someone able to diagnose my teleports problem? [15:17] hmm i think the details got lost in this group, at this point it might be better to open an issue on the teleports repo on gitlab [15:17] [Edit] hmm i think the details got lost in this group, at this point it might be better to open an issue on the teleports repo on gitlab, with all the details you've shared in this group [15:18] @Fuseteam [hmm i think the details got lost in this group, at this point it might be better …], still fine, simply give this log to you, mainly the biggest issue I found is not showing any conversation detail inside a group chat/user chat/channel [15:19] but anyway, I'll register an account and report that issue first [15:40] yeah but that part is usually resolved by a cache clear [15:40] there should a different underlying issue with your teleports install [15:56] @Fuseteam [yeah but that part is usually resolved by a cache clear], nope cache clear still have the same fate [17:10] iamdeffis was added by: iamdeffis [17:10] usually [17:11] @iamdeffis, `/teamrt/` or out [17:11] @UniversalSuperBox [@iamdeffis, /teamrt/ or out], what [17:11] why [17:11] please remove the slur from your username [17:11] oh [17:11] ok I'll use my alt without the tag instead [17:14] cofeguy was added by: cofeguy [17:14] Is that one fine or [17:15] no [17:15] this? [17:15] ok [17:15] glad [17:16] [Edit] I'm glad [19:15] I installed Ubuntu Touch on a Nexus 5 and am trying to get my SIM card to work. The cellular carrier is Cellcom (US). [19:17] @Dockerfile256 [I installed Ubuntu Touch on a Nexus 5 and am trying to get my SIM card to work. …], it's not providing service via CDMA is it? [19:20] no [19:20] Cellcom is a CDMA/LTE carrier. [19:28] right it's CDMA [19:29] only GSM works in UT currently [19:31] Is LTE supported? [19:31] Yes, but activation on CDMA is still required. [19:31] yes [19:31] but you can't register with a CDMA network [19:33] Thank you for your help. [19:33] Are there any plans to support CDMA in the future? [19:34] smashes all the turbos [19:34] lel [19:35] In other words, getting rid of the one device that causes us to need to use the workaround that breaks CDMA [19:35] CDMA is just why [19:35] Or making the workaround only apply to that device [19:36] I thought it was just sprint who did CDMA lol [19:36] Guess not [19:36] I'm too British it appears [19:36] Sprint, Verizon, US Cellular, Cellcom, and various other small carriers [19:37] all the carriers that buy bandwidth from sprint/verizon [19:37] @dohbee [all the carriers that buy bandwidth from sprint/verizon], Lol [19:37] @UniversalSuperBox [Or making the workaround only apply to that device], Well tbh we could roll an ofono confi gparameter for that, as we do now for Samsung rild modifications [19:38] Imagine using Samsung /s [19:40] @amyosx [I'm too British it appears], never British enough [19:40] Its called `ril.device=samsung_msm_822x` but ok ^^ [19:40] @PhoenixLandPirate [never British enough], I drink tea all day [19:40] British [19:41] tea is hardly a british thing [19:41] anyway [19:41] ubuntu touch or something [19:43] @dohbee [tea is hardly a british thing], Lol [19:43] @dohbee [ubuntu touch or something], Yeah its that really cool os for phones made by some of the most talented devs [19:56] @UniversalSuperBox [In other words, getting rid of the one device that causes us to need to use the …], I just looked it up, its roughly 2.5% of our user base so lets deprecate it 😆 [21:37] Only1nrs was added by: Only1nrs [21:46] Fwd from "Liberales - Libertarios": [15 aplicaciones](https://www.fin-tech.es/2016/10/aplicaciones-de-la-tecnologia-blockchain.html)15 aplicaciones de la tecnología blockchain más allá de [bitcoin](http://telegra.ph/15-aplicaciones-de-la-tecnología-blockchain-más-allá-de-bitcoin-07-17) … via www.fin-tech.es [22:10] Duk4x was added by: Duk4x